Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
9/16" 18 TPI Thread Go Gauge Right-Hand ANSI B1.1 2B Hardened Gauge Steel - Metav IndustryLine
Benefit from precise thread verification, durable hardened gauge steel and conformity to ANSI/ASME standards for dependable production control; order via Metav Werkzeuge or consult our advisors for application guidance. Thread Plug Gauge UNF, 9/16 x 18 – ANSI/ASME B1.1, 2B (Metav IndustryLine) The Thread Plug Gauge UNF, 9/16 x 18 (ANSI/ASME B1.1) – 2B is a hardened inspection gauge designed for fast verification of right‑hand internal UNF threads in workshop and quality‑control environments ANSI/ASME B1.1 compliant 9/16 x 18 UNF Hardened gauge steel construction Tolerance class 2B accuracy Right‑hand thread verification Consistent conformity for threaded components Thread form and fit determine interchangeability and assembly reliability. This plug gauge is manufactured to meet ANSI/ASME B1.1 thread geometry, providing a clear reference for internal UNF threads. The combination of precise flank angles and a 2B tolerance class means measurement results can be trusted for go/no‑go assessments and process validation. Using a dedicated gauge reduces subjective judgment at the bench and lowers the risk of rework by catching out‑of‑tolerance threads early in production. Built for durability and practical inspection work Constructed from hardened gauge steel, the gauge resists wear during repetitive checks and maintains dimensional stability over time. Its compact mass and straightforward design make it suitable for busy inspection benches and small workshops alike. The right‑hand thread form and standardised 9/16 x 18 specification (18 threads per inch) allow quick identification of mating parts and streamline routine checks; the robust material and finish also mean fewer replacements and lower lifetime costs compared with softer test implements. Traceability and integration into inspection routines Parts are identified with a clear SKU and GTIN for traceable inventory control, enabling straightforward documentation in quality records. The numerical data — thread size, pitch and tolerance class — supports statistical process control and helps integrate the gauge into calibration schedules. Supplied as a single hardened plug for direct verification of internal UNF threads, the gauge complements a broader metrology toolkit and fits seamlessly into established inspection workflows while reflecting Metav’s focus on accessible, industrial‑grade precision. For reliable thread inspection with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for purchase enquiries or application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M315.925.F GTIN: 4054469179667 Designation: Thread plug gauge UNF, 9/16 x 18 ANSI/ASME B1.1 / 2B Weight: 0.2 kg Facts Size: 9/16" Pitch: 18 threads per inch Tolerance class: 2B Weight: 0.2 kg Special features Material: Gauge steel, hardened Thread direction: Right‑hand Standard: ANSI/ASME B1.1/B1.2 Tariff number: 90173000 Category: Gauges / Measuring pins FAQ How is this gauge used for inspection? The Thread Plug Gauge UNF, 9/16 x 18 checks internal thread form and fit by confirming dimensions against the 2B tolerance; a correct fit verifies conformance to the specified UNF thread profile. Which standards does the gauge follow? The gauge is manufactured to ANSI/ASME B1.1 thread geometry and referenced to the ANSI/ASME family of standards for unified threads. Is the material suitable for workshop use? Yes. The hardened gauge steel construction provides wear resistance appropriate for regular inspection tasks in workshop and production environments. Can the gauge be traced in stock and documentation? Yes; the article is listed with SKU M315.925.F and GTIN 4054469179667 to assist with inventory control and quality documentation. Does the gauge indicate thread direction or special forms? The gauge is specified for right‑hand UNF threads and is intended for checking standard internal 9/16 x 18 UNF forms. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" 24 TPI NOGO UNEF Thread Plug Gauge Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Take advantage of a hardened gauge-steel design and ANSI/ASME conformity for consistent go/no-go assessment of UNEF threads; the NOGO configuration and tolerance class 2A minimise false acceptance and support uninterrupted production. Order the gauge directly via Metav Werkzeuge or consult our experts for application advice. UNEF NOGO Thread Gauge, 9/16-24 (ANSI/ASME B1.1/B1.2) — Metav IndustryLine The UNEF NOGO Thread Gauge, 9/16-24 is a right-hand NOGO ring for fast go/no-go inspection of external UNEF threads in workshop and production environments Hardened gauge steel construction Conforms to ANSI/ASME B1.1/B1.2 NOGO ring for UNEF 9/16-24 threads Tolerance class 2A — right-hand thread Reliable assessment that reduces rework and inspection time The NOGO ring is engineered for repeatable, quick checks of external threads and is ideal where a simple pass/fail decision must be reliable under production conditions. Made from hardened gauge steel, the ring resists wear and retains its checking profile over many cycles, which reduces measurement drift and the need for frequent replacement. Its NOGO function means the gauge is used to verify that the major diameter or thread form does not exceed the maximum material condition — a direct way to prevent oversize threads from passing inspection and so to cut downstream rework. Conformity to standards for clear acceptance criteria Compliance with ANSI/ASME B1.1/B1.2 provides unambiguous criteria for thread acceptance and aligns inspection practice with commonly applied industrial standards. The gauge’s specification — 9/16-24 with tolerance class 2A — matches typical production and maintenance requirements for fine-threaded fastenings, enabling consistent decisions on interchangeability and fit. Using a dedicated NOGO ring simplifies quality workflows: a single tactile check replaces more time-consuming measurements, improving throughput while maintaining objective control. Practical durability and handling for everyday shop use Designed as a compact inspection tool, the ring offers a robust balance of stiffness and portability; the listed weight supports easy handling during repetitive checks. The right-hand thread configuration suits standard external threads and the tool’s hardened construction supports long service life even in routine shop-floor conditions. For procurement and traceability the gauge is supplied with the manufacturer’s identification, helping to maintain an auditable inspection regime within production or maintenance documentation. For precision thread inspection rely on Metav IndustryLine — order the UNEF NOGO thread gauge through Metav Werkzeuge or contact our consultants at +49 2822 7131930 / info@metav-werkzeuge.com for tailored advice Technical Data Article number: M315.985.EF GTIN: 4054469180939 Weight: 0.4 kg Material: gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Facts Thread size: 9/16" Pitch: 24 TPI Tolerance class: 2A Configuration: NOGO (external thread check) Special features Right-hand thread eClass: 21170214 Category path: Gauges / Inspection rings Label: Gewinde-Lehrring UNEF NOGO, 9/16 x 24 ANSI B1.1 / 2A FAQ What is the purpose of a NOGO ring? A NOGO ring serves as a go/no-go control for external threads; the UNEF NOGO Thread Gauge, 9/16-24 from Metav IndustryLine is used to confirm that a thread does not exceed maximum material limits and thus prevents oversized parts from being accepted. Which standard does this thread gauge follow? The checking dimension and acceptance criteria follow ANSI/ASME B1.1/B1.2, and the supplied gauge is specified for UNEF 9/16-24 threads with tolerance class 2A. Can this gauge be used in a production environment? Yes. The design and hardened gauge steel construction make the UNEF NOGO Thread Gauge suitable for routine production checks and rapid go/no-go inspection tasks. How does tolerance class 2A affect inspection? Tolerance class 2A defines the external thread tolerance band; using the 2A NOGO ring ensures that threads meet the intended fit and mating requirements for standard external UNEF threads. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" 24 TPI Thread Go Gauge UNEF Right-Hand Hardened Gauge Steel ANSI/ASME B1.1/B1.2 - Metav IndustryLine
Combine the precision 2B thread tolerance with hardened gauge steel for consistent pass/fail checks and long service life; order directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge UNEF 9/16 x 24 (2B) – hardened gauge steel, right-hand thread The Thread plug gauge UNEF 9/16 x 24 (2B) is a hardened pass gauge designed for quick verification of internal thread conformity to ANSI/ASME B1.1 in production and inspection environments. Precision 2B thread tolerance ANSI/ASME B1.1 compatible standard Hardened gauge steel construction Right-hand thread for standard fittings Fast, reliable verification of internal threads The pass gauge serves as a compact acceptance tool for internal threads, reducing measurement time during routine checks. Thanks to the 2B tolerance and the compatibility with ANSI/ASME B1.1, the gauge delivers an immediate Go/No‑Go decision that prevents non-conforming parts from progressing through production. This straightforward verification cuts rework and supports consistent output quality, which is particularly valuable in repetitive manufacturing and assembly processes where cycle time and traceability matter. Built to resist wear and sustain accuracy Manufactured from hardened gauge steel, the gauge maintains dimensional integrity across many inspections, giving a durable reference surface that resists deformation. The robust material choice ensures stable contact geometry and extended life when used as intended, lowering lifetime cost compared with softer checking tools. With a clearly defined right-hand thread form and a standard pitch of 24 tpi, the gauge is suited for frequent shop-floor use and keeps inspection programmes predictable and repeatable. Seamless integration into production control As a standardised pass gauge, the tool fits easily into existing inspection routines and documentation workflows. The simple Go/No‑Go outcome supports rapid quality decisions at first article inspection or in-process sampling, strengthening process control. The gauge’s adherence to recognised standards facilitates communication between suppliers and quality departments and helps maintain clear acceptance criteria when handing over components. Practical handling for routine use Compact and lightweight, the gauge is straightforward to store and to incorporate into inspection kits; it is ready where and when checks are required. The combination of a defined 2B tolerance and hardened construction gives confidence during frequent handling, while the familiar thread form ensures compatibility with standard threaded components. For workshops that require dependable, low-complexity inspection aids, this plug gauge offers a pragmatic balance of precision and durability. Choose Metav IndustryLine quality for dependable thread inspection — contact Metav Werkzeuge for tailored advice and secure supply from Emmerich. Technical data Article number: M315.925.EF GTIN: 4054469179650 SKU: M315.925.EF Core data Size: 9/16" Pitch: 24 tpi Tolerance class: 2B Standard: ANSI/ASME B1.1/B1.2 Weight: 0.2 kg Materials & features Material: gauge steel, hardened Thread direction: right-hand Type: thread plug (pass) gauge Application: internal thread verification FAQ What standard does this plug gauge check against? The plug gauge checks internal threads to ANSI/ASME B1.1/B1.2 specifications and is manufactured to the corresponding form and pitch for reliable conformity tests. Is the gauge suitable for production line sampling? Yes, the hardened construction and 2B tolerance make this plug gauge appropriate for frequent in-process checks and rapid Go/No‑Go decisions on the production floor. Which material is the gauge made from and what does that mean for durability? Constructed from hardened gauge steel, the gauge delivers wear resistance and long-term dimensional stability under normal inspection use. Can this gauge be used for both left- and right-hand threads? This specific item is a right-hand thread plug gauge for UNEF 9/16 x 24; left-hand threads require a corresponding left-hand gauge. How is traceability handled for this gauge? The gauge is supplied with product identification (GTIN and article number) so it can be documented in quality records; further calibration traceability can be arranged if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" Thread Go Gauge UNC 9/16 x 12, ANSI B1.1 2B - Metav IndustryLine
Combine hardened gauge steel construction with ANSI/ASME B1.1 conformity and a 2B tolerance class to ensure fast, repeatable Go/No‑Go thread verification; order the thread plug gauge UNC 9/16‑12 directly via Metav Werkzeuge or ask our consultants if needed Thread plug gauge UNC, 9/16‑12 – 2B tolerance, hardened gauge steel (Metav IndustryLine) The thread plug gauge UNC, 9/16‑12 is a compact Go/No‑Go gauge designed for the verification of internal UNC 9/16‑12 threads in production and quality control to ANSI/ASME B1.1 standards ANSI/ASME B1.1 conformity Hardened gauge steel construction Tolerance class 2B Go/No‑Go verification Fast, repeatable Go/No‑Go inspection for threaded components A plug gauge provides an immediate pass/fail decision: the Go‑end confirms correct internal form and pitch, the No‑Go‑end detects oversize defects. The hardened gauge steel body maintains dimensional stability across repeated use, reducing measurement drift and downtime. By using a tool matched to ANSI/ASME B1.1, shops minimise rework and ensure components meet accepted UNC thread geometry without complex set‑ups or optical inspection. Robust material and careful handling to extend service life Manufactured from hardened gauge steel, this plug gauge resists wear that would otherwise alter thread form. Regular visual inspection and light lubrication for storage prevent corrosion and preserve the measuring faces. For routine inspection cycles, the gauge's compact mass allows quick handling and stable seating in the workpiece, speeding throughput while keeping measurement uncertainty low. The combination of material choice and simple handling practice delivers consistent results over long production runs. Standards, traceability and efficient quality documentation Conformity to ANSI/ASME B1.1/B1.2 and a defined 2B tolerance class provide a clear criterion for acceptance in procurement and production documents. Traceability is supported by the included identifiers and GTIN, enabling straightforward record keeping within quality systems. Using a standardised plug gauge reduces subjective decision‑making on the shop floor, which streamlines audits and accelerates corrective actions when deviations occur. Practical workflow: quick checks that protect downstream processes Integrating the plug gauge into first‑article inspection or in‑line spot checks prevents the costly cascade of fitting and assembly errors. The gauge is suited to rapid verification during incoming inspection or final control, where a clear Go/No‑Go outcome reduces sorting time and supports just‑in‑time production. Where required, the straightforward test routine can be combined with documented sampling plans to balance speed and statistical confidence. For reliable thread gauging from Metav IndustryLine and purchase or technical advice contact Metav Werkzeuge directly — Metav Werkzeuge will assist with selection and order processing Technical data SKU: M315.925 GTIN: 4054469179643 Article designation: Thread plug gauge UNC, 9/16 x 12 ANSI B1.1 / 2B Manufacturer: Metav IndustryLine Facts Size: 9/16" Pitch: 12 TPI Tolerance class: 2B Weight: 0.2 kg Customs tariff number: 90173000 eClass: 21170214 Special features Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Application: Go/No‑Go thread verification FAQ What does the 2B tolerance class mean for internal threads? The 2B tolerance class denotes the standard internal thread tolerance for general engineering applications; the thread plug gauge UNC 9/16‑12 checks that internal threads conform to that specific fit. Can this plug gauge be used for incoming inspection of purchased parts? Yes, the Metav IndustryLine thread plug gauge UNC 9/16‑12 is intended for incoming and in‑process checks, providing immediate Go/No‑Go results for UNC 9/16‑12 threads. How should the plug gauge be stored to preserve accuracy? Store the plug gauge in a dry, stable environment, lightly oiled if required; the hardened gauge steel construction resists wear, but correct storage prevents corrosion and protects the measuring faces. Is the gauge suitable for serial production checks? The gauge is engineered for repeated use in production settings; hardened material and ANSI/ASME compliance make it suitable for serial quality control and spot checks. What identifiers are available for documentation and traceability? The product is supplied with SKU M315.925 and GTIN 4054469179643 to support traceability, inventory control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" Thread Go/No-Go Ring Gauge UNC 12 TPI, Hardened Gauge Steel ANSI/ASME B1.1 2A - Metav IndustryLine
Take advantage of the combination of ANSI/ASME B1.1 conformity, hardened gauge steel and tolerance class 2A for consistent, repeatable thread inspection. Order the gauge directly via Metav Werkzeuge or ask the Metav consultants for application advice. Thread ring gauge UNC NOGO, 9/16-12 ANSI/ASME B1.1 / 2A — Metav IndustryLine A Thread ring gauge UNC NOGO, 9/16-12 (2A) designed for rapid Go/No‑Go verification of external UNC threads in production and quality inspection. ANSI/ASME B1.1 compliant thread form Hardened gauge steel for wear resistance NOGO design for Go/No‑Go verification Tolerance class 2A for external threads Rapid, reliable Go/No‑Go inspection for production This NOGO ring is optimised for efficient thread checks on series parts, converting dimensional data into an immediate pass/fail decision. The 9/16-12 UNC geometry paired with ANSI/ASME B1.1 adherence provides a clear acceptance criterion, shortening inspection cycles and reducing rework. Using a defined 2A tolerance ensures compatibility with common external thread classes, so measurement decisions are consistent across operators and shifts. Built for longevity and repeatable results Manufactured from hardened gauge steel, the ring resists wear and maintains the original thread form through extended use, which prolongs service intervals and lowers lifetime costs. The NOGO function prevents oversized threads from being accepted by design: the ring should not fit an out-of-tolerance external thread, delivering an unambiguous control point for quality assurance. The compact mass and robust construction make the tool straightforward to handle while preserving dimensional integrity. Suitable for workshop and production environments Engineered for metalworking and inspection benches, this ring gauge fits into standard QC procedures and is appropriate for calibration cycles and incoming inspection. With a standard 12 tpi pitch and common UNC profile, it integrates into test plans for fasteners and assemblies in mechanical engineering and maintenance contexts. The nominal weight of 0.4 kg reflects a solid, portable tool that balances stability with ease of handling for repetitive checks. For dependable thread verification, request the Metav IndustryLine UNC NOGO ring (SKU M315.985) via Metav Werkzeuge or contact the Metav consultants for tailored application support Technical data Article number: M315.985 SKU: M315.985 GTIN: 4054469180922 Label: Thread ring gauge UNC NOGO, 9/16-12 ANSI B1.1 / 2A Facts Thread size: 9/16-12 UNC Pitch: 12 tpi Tolerance class: 2A Weight: 0.4 kg Standard: ANSI/ASME B1.1/B1.2 Special features Material: gauge steel, hardened Type: NOGO (Go/No‑Go concept) Category: gauges / inspection tools ECLASS: 21170214 FAQ What is the primary purpose of this ring gauge? This thread ring gauge UNC NOGO, 9/16-12 ANSI/ASME B1.1 / 2A is intended for quick Go/No‑Go verification of external UNC threads to support production and incoming inspection processes. Which standard does the gauge comply with? The ring is manufactured to ANSI/ASME B1.1 thread form requirements and listed as ANSI/ASME B1.1/B1.2 in the technical data. How does the NOGO function ensure quality control? The NOGO function prevents oversized external threads from passing: the NOGO ring will not enter an out-of-tolerance thread, providing an unequivocal fail criterion during inspection. What material and durability features does the gauge offer? Made from hardened gauge steel, the Metav IndustryLine ring resists wear and maintains thread geometry for extended service life. Is this gauge suitable for standard workshop use? Yes, the 9/16-12 UNC profile and 2A tolerance make the gauge suitable for workshop and production environments where standard UNC fasteners are inspected; SKU M315.985 identifies the exact item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" Thread Ring Gauge UNF 18 TPI Go, Right-Hand, Hardened Gauge Steel, ANSI B1.1/B1.2 - Metav IndustryLine
Take advantage of the combination of precision compliance, hardened construction, and reliable shop‑floor durability to keep thread inspections fast and reproducible; ideal for production control and incoming goods inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge UNF GO, 9/16"-18 ANSI/ASME B1.1 — Go gauge by Metav IndustryLine The Thread ring gauge UNF GO, 9/16"-18 ANSI/ASME B1.1 2A is a purpose-made go gauge for quick verification of external UNF threads in production and inspection environments. ANSI/ASME B1.1 compliant GO gauge Hardened gauge steel construction Tolerance class 2A precision Right-hand thread 9/16"-18 Reliable verification that keeps production moving A GO gauge is the fastest way to confirm whether an external thread falls within the allowable limits set by the standard; the ring presented here is designed for UNF 9/16"-18 threads and is built to the ANSI/ASME B1.1 specification. Using a standardised check instrument like this reduces ambiguity during inspection, shortens cycle times and prevents parts with undersize major diameters or incorrect lead forms from continuing down the line. The result is fewer stoppages, less rework and a more predictable quality flow. Conformance and traceability for quality systems The ring complies with the 2A tolerance class, providing the appropriate fit criteria for components intended to mate with internal 2B threads. By applying an inspection tool that matches the relevant normative requirements, suppliers and manufacturers demonstrate process control that aligns with many quality management systems. This helps to legitimise acceptance criteria during audits and simplifies communication between production, quality and purchasing teams. Robust material and handling to reduce downtime Manufactured from hardened gauge steel, the ring resists wear from repetitive engagement and retains its functional dimensions for extended service life. The compact, balanced form and modest mass make handling straightforward at the inspection bench, while the right‑hand thread orientation matches common production parts. These characteristics mean less frequent replacement, fewer stoppages for gauge changeover and a smaller total cost of ownership across high‑volume applications. Practical use cases on the shop floor This gauge suits end‑of‑line checks, incoming goods inspection and sampling within batch inspections where quick go/no‑go decisions are required. Typical applications include fasteners, shafts with threaded ends and small assemblies in automotive, machinery and maintenance operations. Operators will find the tool intuitive to use: engagement should be smooth without forcing, confirming a go result by hand feel and light rotation. For documentation and lot control, record the article number and GTIN on inspection reports to ensure traceability. Choose the Metav IndustryLine UNF GO ring gauge for standards‑based thread control and contact Metav Werkzeuge for fast supply from Emmerich and application advice. Technical data Article number: M315.955.F GTIN: 4054469180304 Designation: Thread ring gauge UNF GO, 9/16"-18 2A Material: Gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Condition: Good Numbers / Core technical data Size: 9/16" Thread pitch: 18 tpi Tolerance class: 2A Weight: 0.2 kg Tariff number: 90173000 Special features Right-hand thread GO gauge for external threads Hardened gauge steel construction Categories: gauge pins, gauges Compliance: ANSI/ASME B1.1/B1.2 FAQ What thread size and standard does this gauge check? The thread ring gauge checks UNF 9/16"-18 external threads and is manufactured to the ANSI/ASME B1.1/B1.2 standard for GO verification. Is this a GO or NO‑GO gauge? This is a GO gauge: the Metav IndustryLine ring confirms that an external thread is within the lower limit and form required for mating with a 2B internal thread. What material is the gauge made from and why does it matter? The gauge is made of hardened gauge steel, which gives wear resistance and dimensional stability during repetitive inspections, helping to maintain reliable checking performance over time. How is the tolerance class specified for this gauge? The instrument is made for tolerance class 2A, the commonly used external thread tolerance for general mechanical assemblies that mate with 2B internal threads. Can this gauge be used on production lines for rapid checks? Yes, the compact design and hardened construction make it suitable for fast shop‑floor checks, incoming inspection and sampling routines where quick go/no‑go results are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" UNC Three-Point GO Thread Ring Gauge 12 TPI ANSI B1.1 2A Hardened Gauge Steel - Metav IndustryLine
Take advantage of a proven inspection tool that combines hardened gauge steel and strict ANSI/ASME B1.1 compliance to ensure repeatable GO checks on UNC threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge UNC GO, 9/16" x 12, ANSI/ASME B1.1 – 2A (Metav IndustryLine) The Thread ring gauge UNC GO, 9/16" x 12 – 2A is a precision inspection gauge designed to verify external UNC threads to ANSI/ASME tolerances in production and incoming‑inspection environments. *Hardened gauge steel for durable inspection *ANSI/ASME B1.1 compliant 9/16" x 12 thread check *Tolerance class 2A for GO verification accuracy *Compact 0.2 kg mass for easy handling Consistent compliance for faster quality decisions The GO ring is manufactured to meet ANSI/ASME B1.1 requirements and the 2A tolerance class, providing a clear, objective pass criterion for external UNC threads. Using a dedicated GO gauge reduces subjective judgement during manual checks and accelerates decision making on the shop floor. The result is fewer rework loops and more reliable throughput, because the inspection outcome is defined by an accepted standard rather than visual estimation. Built for workshop durability and simple handling Made from hardened gauge steel, the tool resists wear and keeps the measuring form stable over many inspection cycles, which lowers total cost of ownership. Its compact mass (0.2 kg) and hand‑friendly profile support quick, repeatable checks at the machining centre or assembly bench. The robust construction translates directly into predictable service intervals and less downtime for gauge maintenance. Practical use in production and quality control This GO ring gauge is suitable for routine production sampling and incoming part verification where UNC threads 9/16" x 12 are specified. The gauge provides a single, unambiguous GO test for external threads; when the thread enters the gauge smoothly, the part conforms to the specified 2A tolerance envelope. Integration into a standard inspection routine is straightforward and supports traceable quality records when combined with internal process documentation. Contact Metav Werkzeuge today for tailored supply and technical advice on integrating this thread ring gauge into existing inspection workflows Technical data Article number: M315.955 GTIN: 4054469180281 SKU: M315.955 Facts Thread size: 9/16" x 12 UNC Pitch: 12 tpi Tolerance class: 2A Mass: 0.2 kg Special features Material: gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Type: GO thread ring gauge Use: external thread verification FAQ What thread size does this gauge check? The ring verifies external 9/16" x 12 UNC threads in accordance with the ANSI/ASME B1.1 standard. Is the gauge suitable for production sampling? Yes, the GO ring gauge is designed for routine production and incoming‑inspection sampling to confirm parts meet the 2A tolerance class. What material is the gauge made from? The gauge is manufactured from hardened gauge steel, ensuring wear resistance and long‑term dimensional stability. How does the GO gauge indicate conformity? Conformity is determined by a pass/fail check: if the external thread enters the GO ring freely, the part meets the specified 2A limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" x 18 UNF Thread Go/No-Go Ring Gauge Right-Hand ANSI/ASME B1.1/B1.2, Hardened Gauge Steel - Metav IndustryLine
Take advantage of robust in‑process verification with a NO‑GO ring that enforces ANSI/ASME B1.1 tolerances and a 2A thread class for consistent quality control. Order the gauge directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Thread Ring Gauge UNF NO‑GO 9/16 x 18, 2A — Metav IndustryLine A Thread Ring Gauge UNF NO‑GO 9/16 x 18 for fast verification of external UNF threads to ANSI/ASME B1.1 tolerances, designed for shop‑floor and inspection‑bench use NO‑GO for UNF 9/16×18 threads Hardened gauge steel construction ANSI/ASME B1.1/B1.2 compliance Tolerance class 2A accuracy Fast, fail‑safe thread control on the shop floor A NO‑GO ring provides a direct, unambiguous check against oversize external threads: if the ring does not enter, the part conforms to the maximum material limits. This simple pass/fail method reduces cycle time in production and removes interpretation from go/no‑go decisions. The gauge is optimised for routine checks where speed and repeatability are required, delivering a tangible reduction in rework and scrap during serial manufacture. Built for repeatability and long service life Manufactured from hardened gauge steel, the ring is dimensionally stable under repeated use and resists surface wear that would otherwise affect accuracy. The compact mechanical design and balanced mass ensure consistent engagement with the mating thread, which supports repeatable inspection results over long production runs. This durability translates into lower lifecycle cost and predictable maintenance intervals for metrology programmes. Standards alignment that simplifies conformity checks Engineered to the ANSI/ASME B1.1/B1.2 thread form and specified 2A tolerance class, the ring matches common UNF external thread requirements. The UNF 9/16×18 designation and right‑hand thread configuration make the gauge immediately applicable to fastener and component inspection tasks within North American and international supply chains. Conformity to the standard means inspection records are directly comparable between suppliers and customers. Integrates cleanly into inspection processes The ring's straightforward geometry allows rapid bench mounting or handheld checks as part of pre‑assembly or incoming inspection routines. Its lightweight construction and compact profile support ergonomic handling during repetitive checks, while the clear pass/fail behaviour aids documentation and traceability in quality systems. For tailored advice on implementing this gauge in specific workflows, Metav Werkzeuge’s technical team can provide guidance and matching accessories. Contact Metav Werkzeuge to discuss suitability for your inspection setup or to request a formal quotation for the Metav IndustryLine NO‑GO Thread Ring Gauge M315.985.F Technical data Article number: M315.985.F GTIN: 4054469180946 Label: Thread Ring Gauge UNF NO‑GO, 9/16 x 18, 2A Manufacturer: Metav IndustryLine Core technical data Size: 9/16" Pitch: 18 tpi Weight: 0.4 kg Tolerance class: 2A Standard: ANSI/ASME B1.1/B1.2 Special features NO‑GO ring gauge Right‑hand thread Material: hardened gauge steel Categories: Gauges; Measuring pins FAQ What does NO‑GO mean in practice for inspection? A NO‑GO ring is used to confirm that an external thread does not exceed the maximum material condition; the ring must not enter if the thread is within tolerance. The Metav IndustryLine NO‑GO ring provides an immediate pass/fail outcome for this check. Which thread standard and class does this gauge follow? The ring is manufactured to ANSI/ASME B1.1/B1.2 and specified for 2A external thread tolerance, covering UNF 9/16×18 profiles. Is the gauge suitable for high‑volume production checks? Yes — the hardened gauge steel construction and compact form support frequent use on the shop floor and in inspection benches without rapid wear. How is thread direction identified on the gauge? This ring is supplied with a right‑hand thread configuration as standard for UNF 9/16×18 applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9/16" x 24 UNEF Thread Ring Gauge Go, Right-Hand, Hardened Gauge Steel, ANSI/ASME B1.1/B1.2 - Metav IndustryLine
The combination of precise thread verification, hardened gauge steel construction and conformity with ANSI/ASME B1.1 delivers reliable, repeatable checks for production and incoming inspection; order the gauge directly via Metav Werkzeuge or ask our consultants for application advice. Thread ring gauge UNEF GO, 9/16 x 24 ANSI B1.1 / 2A — GO ring gauge, hardened gauge steel, Metav IndustryLine The Thread ring gauge UNEF GO, 9/16 x 24 ANSI B1.1 / 2A is a hardened gauge‑steel GO ring for the verification of external 9/16‑24 UNEF threads to the ANSI/ASME B1.1 2A tolerance class, intended for workshop and production use GO ring for 9/16 x 24 UNEF threads Manufactured to ANSI/ASME B1.1 standard Hardened gauge steel for long service life Certified conformity for consistent inspection results The GO ring provides a clear, standards‑based criterion for pass/fail checks, complying with ANSI/ASME B1.1 and the 2A tolerance class for external threads. This standardised approach removes ambiguity from routine inspections, enabling rapid decisions at the receiving dock or on the shop floor. By relying on a plain GO gauge instead of subjective visual assessment, process throughput and quality documentation are both improved. Robust, wear‑resistant build that lowers running costs Manufactured from hardened gauge steel, the ring resists everyday wear and maintains thread form during repeated engagement, reducing the need for frequent replacement. The compact 9/16‑24 UNEF size and a mass of approximately 0.2 kg make the gauge easy to handle while retaining the rigidity necessary for reproducible checks. The durable construction translates into fewer measurement interruptions and lower lifecycle cost for production testing equipment. Designed for efficient integration into inspection routines As a single‑criteria GO ring, this tool excels where a quick verification of external threads is required: incoming parts inspection, final assembly checks and spot checks in machining cells. The simple GO‑only check supports fast throughput and clear non‑conformance signalling; for more detailed assessment, supplementary thread measurement methods can be used in parallel. The gauge is supplied ready for immediate use and is suited to continuous inspection cycles in industrial environments. Secure consistent thread inspection with Metav IndustryLine’s hardened GO ring; contact Metav Werkzeuge for technical consultation or to request the M315.955.EF for immediate integration into production control Technical Data Article number: M315.955.EF GTIN: 4054469180298 Tariff number: 90173000 Facts Thread size: 9/16" x 24 Pitch: 24 TPI Tolerance class: 2A Weight: 0.2 kg Standard: ANSI/ASME B1.1/B1.2 Special features Material: gauge steel, hardened Thread form: UNEF (external) Thread direction: right‑hand thread Type: GO ring gauge Condition: ready for inspection use FAQ What does the 2A tolerance class mean for this gauge? The 2A class indicates the gauge is manufactured to the common external thread tolerance for general engineering; the Thread ring gauge UNEF GO, 9/16 x 24 ANSI B1.1 / 2A verifies that external threads meet that standard. Is this gauge suitable for fast incoming‑inspection checks? Yes, the GO ring gauge M315.955.EF is designed for rapid pass/fail decisions during incoming inspection and in‑process control. What material is the ring made from and why does it matter? The ring is made from hardened gauge steel, providing wear resistance so the GO criterion remains stable over many cycles, ensuring repeatable thread verification. Does this product check left‑hand threads? No, this specific ring is for right‑hand UNEF threads as stated under special features; left‑hand thread checks require the corresponding left‑hand gauge. Can this gauge be used to measure pitch or form exactly? A GO ring provides a go/no‑go verification of thread acceptance rather than detailed pitch or flank‑form measurement; for dimensional analysis, supplementary measurement methods are recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Limit Plug Gauge Three-Point H7 DIN 2245, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a standardised inspection tool that combines conformity to DIN 2245 with an H7 tolerance for reliable pass/fail checks; its hardened gauge steel construction ensures long service life and consistent results on the shop floor. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge M314.090 – 90.0 mm, DIN 2245 (H7) The Limit plug gauge M314.090 is a hardened inspection mandrel for fast, standardised verification of bore diameters to DIN 2245, suitable for production testing and quality control in metalworking environments. DIN 2245 conformity, H7 tolerance Hardened gauge steel construction Quick pass/fail bore inspection GTIN 4054469121901 Fast, standardised shop‑floor inspection that reduces downtime A DIN‑based limit gauge delivers a straightforward verdict: accept or reject. Built to DIN 2245 with H7 tolerance, this plug gauge was developed for repeatable bore verification and fits seamlessly into production inspection routines. The clear pass/fail principle eliminates lengthy measurement interpretation and accelerates throughput, while the standardised dimensions simplify documentation and audit traces. By using a purpose‑made mandrel rather than ad‑hoc checks, manufacturers secure faster decision cycles and fewer process interruptions. Robust construction for consistent, long‑term accuracy Manufactured from gauge steel that has been hardened, the mandrel resists wear and maintains its geometry under repeated use. The material choice and heat treatment provide a stable contact surface, which stabilises measurement outcomes and reduces the need for frequent reconditioning. Robust construction translates directly into lower inspection costs per part and improved reproducibility of results across shifts. For workshops requiring reliable physical gauges rather than electronic readouts, the mechanical simplicity of this design offers proven longevity and minimal maintenance. Traceability and shop integration for quality management The article is assigned a clear GTIN and an internal article reference, making it straightforward to record in inspection plans and ERP systems; such traceability supports quality processes and corrective‑action workflows. The mandrel is intended as a calibrated checking tool within standardised inspection chains and pairs well with written acceptance criteria used in production control. As a product from Metav IndustryLine, it complements a broader metrology portfolio that focuses on dependable supply and practical workshop integration. Prefer the DIN 2245 H7 limit plug gauge for efficient production checks — contact Metav Werkzeuge to arrange supply and application guidance Technical data Article number: M314.090 GTIN: 4054469121901 Norm: DIN 2245 Diameter: 90.0 mm Material: Gauge steel, hardened Facts eCl@ss: 21170218 Customs tariff no.: 90173000 Diameter: 90.0 mm Special features Tolerance: H7 Conforms to DIN 2245 Intended for pass/fail bore inspection Category: Messstifte; Lehren SKU: M314.090 FAQ What is the intended use of this plug gauge? This plug gauge is designed for pass/fail verification of bore diameters in production and inspection environments; the M314.090 checks conformity to DIN 2245 with H7 tolerance. Which materials and processes is the gauge suited for? Made of hardened gauge steel, the M314.090 is suitable for repeated use in metalworking inspection tasks where a mechanical limit check is required. How does the H7 tolerance affect acceptance criteria? An H7 tolerance defines the upper and lower boundary for acceptable bore size under DIN 2245; using the M314.090 implements that acceptance limit as a clear physical check. Is the gauge documented for traceability in quality systems? Yes, the article is provided with a GTIN and a clear article number to ease logging into inspection plans and traceability records. Can the plug gauge be used as part of routine quality control? The M314.090 is intended for routine production checks and integrates well with documented inspection procedures and standardised acceptance rules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3 - Metav IndustryLine
The combination of hardened and lapped gauge steel, DIN-class tolerances and a stable 90 mm diameter provides a compact, wear‑resistant reference for setting and checking measuring instruments; order the ring directly via Metav Werkzeuge or ask the Metav consultants for application advice. Setting ring 90 mm (Form C) – hardened gauge steel, DIN 2250 The Setting ring 90 mm is a precision reference gauge designed for workshop and metrology use, suitable for fixture setting, micrometer verification and repeatable calibration tasks. 90 mm nominal diameter, form C Hardened and lapped gauge steel Manufactured to DIN 2250 / DIN 286, JS 3 Stable weight 1.7 kg for secure seating Faster, more reliable setup with a compact reference A compact reference gauge shortens setup time and reduces process variation. The 90 mm reference blank, made from hardened gauge steel and lapped to a fine finish, delivers a consistent contact surface that resists wear during repeated use. For production environments and maintenance benches this means fewer adjustments, quicker tool changes and lower risk of scrapped parts. The mass and geometry of the ring also help maintain secure seating on fixtures, improving repeatability when comparing instruments or setting micrometers. Consistent measurements backed by DIN tolerances Compliance with DIN 2250 and DIN 286, combined with a JS 3 tolerance grade, ensures the component meets established metrological expectations for interchangeability and fit. Those standards define permissible deviations so that the gauge can be used confidently as a reference in calibration chains. The ring’s specification therefore supports quality control procedures and helps integrate the item into existing inspection routines without guesswork or additional adjustments. Durable design for long service life and low maintenance The material choice—gauge steel, hardened and lapped—balances surface hardness with dimensional stability. Hardening increases wear resistance at the contact zones; lapping produces a low‑roughness surface that minimises abrasion on mating instruments. As a result, the reference blank maintains its dimensions across many measurement cycles, reducing the need for frequent replacement and lowering long‑term operating costs. Where repeatability matters, the robust construction preserves reference accuracy under normal workshop handling. For procurement or technical clarification of the Metav IndustryLine setting ring, contact Metav Werkzeuge for tailored advice and rapid delivery from Emmerich. Technical data Article number: M313.090 GTIN: 4054469120997 Manufacturer: Metav IndustryLine Weight: 1.7 kg Facts Diameter: 90 mm Tariff number: 90173000 eClass: 21170104 Special features Material: hardened and lapped gauge steel Standard: DIN 2250 and DIN 286, JS 3 Form: Form C Category: setting gauge / ring FAQ What is the primary use of this setting ring? The 90 mm setting ring serves as a precision reference for setting micrometers, checking gauges and establishing fixture limits; the Metav IndustryLine setting ring M313.090 is intended for repeatable workshop and inspection tasks. How does the material treatment benefit measurement stability? Hardening and lapping of the gauge steel reduce surface wear and produce a stable, low‑roughness contact face; this preserves dimensional stability of the Metav IndustryLine setting ring during frequent use. Are the tolerances suitable for shop‑floor quality control? Yes; the ring is produced to DIN 2250 / DIN 286 with a JS 3 tolerance, which is appropriate for many workshop calibration and setting operations where traceable, consistent fits are required. Can the ring be used to check micrometer accuracy? Yes; the ring is designed as a reference blank for micrometer and gauge setting; its stable diameter and surface finish make it suitable for verifying instrument repeatability. Is the manufacturer information available for documentation? Manufacturer and supply details are provided in the technical section and with the product documentation supplied by Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
92 mm Limit Plug Gauge H7 DIN 2245 Hardened Gauge Steel 3.3 kg - Metav IndustryLine
The supplied product data contains contradictory quality indicators: the same record is flagged both as a reject and as acceptable, which makes the item's status unclear. There is also a discrepancy between the weight shown on the product label (stated as 3.0 kg) and the recorded weight value (3.3 kg). Because of these inconsistencies, a reliable product description cannot be produced. Please review and correct the source data—confirm the correct quality status and reconcile the weight information—then resubmit the entry. Once the conflicting entries are resolved, a complete, standards-compliant product text can be created immediately. If assistance is required to interpret the data fields or to correct the entry, contact Metav Werkzeuge for support.
92mm Setting Ring, Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of DIN-certified tolerance (DIN 2250 / DIN 286, JS 3), hardened and lapped gauge steel, and a stable 92 mm nominal diameter for repeatable reference measurements; order the setting ring directly via Metav Werkzeuge or ask our consultants if needed. Setting ring 92 mm (DIN 2250) — hardened gauge steel, JS 3 by Metav IndustryLine The setting ring 92 mm is a DIN-standard reference ring gauge for verification and setting of external diameters in precision metrology, designed for workshop use and calibration benches. DIN 2250 / DIN 286 tolerance JS 3 Hardened and lapped gauge steel Nominal diameter 92 mm 3 kg mass for measurement stability Precise conformity for reliable calibration routines The ring is manufactured to DIN 2250 and DIN 286 with tolerance JS 3, providing a clear specification for permitted deviation and interchangeability in industrial metrology. Built from hardened and lapped gauge steel, the component offers a wear‑resistant, fine surface finish that keeps measurement drift low over repeated use. As a reference ring gauge, it serves both as a bench standard for instrument setting and as a verification artefact for production checks, translating standardised tolerances into day‑to‑day reproducibility. Stable handling and consistent measurement results With a nominal diameter of 92 mm and a mass of 3 kg, the ring provides the inertia and contact stability needed to reduce minor disturbance during measurement operations. The Form C profile facilitates safe seating on flat supports and straightforward engagement with external diameters, which streamlines the setting process for micrometres and comparators. The result is fewer rechecks and faster throughput in routine calibration or workshop measurement tasks, improving process efficiency without compromising on accuracy. Durable construction for long service life Surface lapping and hardening treatments ensure the gauge resists abrasion while maintaining the geometry required for JS 3 conformity. The selected gauge steel and finishing processes minimise the need for frequent replacement, so the part performs as a dependable reference across production cycles. Where traceability and documentation are required, the ring’s adherence to recognised DIN standards simplifies inclusion in quality records and inspection plans, supporting consistent quality assurance practices. For procurement or technical advice on the Metav IndustryLine setting ring, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — assistance and ordering from the European quality filter are available promptly Technical data Article number: M313.092 GTIN: 4054469121000 Tariff code: 90173000 Facts Nominal diameter: 92 mm Weight: 3 kg Standards: DIN 2250; DIN 286; tolerance JS 3 Special features Material: hardened and lapped gauge steel Form: Form C Category: Lehren (gauges) Brand: Metav IndustryLine FAQ What is the primary use of this reference ring? The setting ring 92 mm is intended as a reference for setting and checking external diameters, serving as a bench standard for micrometres, comparators and other external‑diameter measuring devices. Which standards and tolerance class does the ring meet? The component is manufactured to DIN 2250 and DIN 286 and is specified to tolerance class JS 3 for interchangeability and repeatable conformity. What material and surface finish are used? The ring is made from hardened and lapped gauge steel, providing a wear‑resistant surface and the fine finish required for stable reference measurements. What are the nominal size and mass of the ring gauge? Nominal diameter is 92 mm and the part weighs 3 kg, a combination chosen to aid contact stability and reduce measurement variation. Is the ring suitable for regular workshop use and calibration benches? Yes, the construction, Form C profile and DIN conformity make it appropriate for workshop setting routines and as a stable reference on calibration benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
95mm Limit Plug Gauge H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Taking advantage of a DIN 2245-compliant design and an H7 tolerance, this limit plug gauge combines measured repeatability with robust, hardened-gauge-steel construction to support reliable bore inspection. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge, 95.0 mm (H7) — Metav IndustryLine A limit plug gauge 95.0 mm H7 engineered for go/no-go verification of cylindrical bores in production environments and quality inspection. DIN 2245 compliant plug design Hardened gauge steel for durability H7 tolerance for precise bore checks Repeatable acceptance testing for production control A go/no-go plug of this configuration is intended to deliver clear, unambiguous results during acceptance routines. Built to DIN 2245, the design provides a defined reference form for bore inspection; the incorporated H7 tolerance ensures the gauge corresponds to the nominal acceptance band used across machining and inspection processes. The result is a straightforward pass/fail decision that reduces interpretation time, supports uniform sampling plans and helps maintain stable process control on the shop floor. The practical outcome is fewer false rejections and faster throughput in routine checks. Durable construction that lowers maintenance needs Constructed from hardened gauge steel, the component resists wear under repeated use and keeps the measuring boundary stable over many cycles. The hardened material offers long-term dimensional stability, which minimises the frequency of replacement and supports a consistent inspection capability. In addition, the standardised limit form simplifies handling and storage procedures, reducing downtime associated with rework and verification of worn gauges. The emphasis here is on robust performance and low life‑cycle effort for production environments. Clear traceability and simple procurement Identification and traceability are supported by the provided article information and product coding, enabling integration into inventory and quality systems. The compact specification—nominal 95.0 mm diameter with the H7 fit class—permits consistent documentation in inspection plans and measurement protocols. Procurement is simplified via the Metav IndustryLine channel, which combines central European distribution with comprehensive product filtering; this supports reliable supply and reduces administrative effort for repeat purchases. For procurement or application support for the Metav IndustryLine limit plug gauge (SKU M314.095), contact Metav Werkzeuge for expert guidance and dependable delivery from Emmerich. Technical data Article number: M314.095 GTIN: 4054469121925 ECLASS: 21170218 Material: hardened gauge steel Standard: DIN 2245 Diameter: 95.0 mm Tolerance: H7 Customs tariff number: 90173000 Facts Nominal diameter: 95.0 mm Tolerance class: H7 Standard: DIN 2245 GTIN: 4054469121925 Special features Limit plug design for go/no-go verification Hardened gauge steel for wear resistance Intended for bore inspection and acceptance testing Category: Gauges / Measuring pins FAQ What inspection tasks is this limit plug gauge suited for? The limit plug gauge is suited for go/no-go verification of cylindrical bores where a 95.0 mm nominal diameter with H7 tolerance is specified; it is commonly used in production checks and final acceptance routines. Is the gauge material indicated? The product is made from hardened gauge steel, providing abrasion resistance and stable contact geometry under repeated use. Which standard does this gauge comply with? Compliance with DIN 2245 is specified for the construction and limit form of the plug, ensuring compatibility with established inspection practices. Does the gauge allow unambiguous pass/fail decisions? Yes, the limit plug form offers a clear go/no-go result within the defined H7 tolerance band, which simplifies acceptance testing. How is the product identified for inventory and ordering? The item is listed under Metav IndustryLine with article number M314.095 and GTIN 4054469121925 for consistent tracking in procurement and quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
95mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of a precision reference that combines a 95 mm nominal diameter with a hardened, lapped gauge-steel finish and conformity to DIN 2250 / DIN 286 (JS 3) for dependable setup and repeatable inspection results; order via Metav Werkzeuge or consult the Metav team for application advice. M313.095 setting ring 95 mm (Form C) — hardened, lapped gauge steel The M313.095 setting ring 95 mm is a precision setting standard designed for calibration, fixture setup and dimensional checks in metrology and workshop environments. Hardened, lapped gauge steel construction Conforms to DIN 2250 and DIN 286, JS 3 Form C profile for standardised setting tasks 95 mm nominal diameter for shaft and gauge calibration Consistent reference for calibration and setup The setting ring offers a stable, standardised reference that simplifies repeatable measurements. Made from hardened, lapped gauge steel, the component resists wear and preserves its measuring surface under routine use, so calibration intervals focus on process control rather than corrective maintenance. Conformity with DIN 2250 and DIN 286 in JS 3 tolerance ensures the ring sits within a recognised tolerance band; this provides a verifiable benchmark for gauges and ring-masters, reducing ambiguity when comparing inspection results across shifts or sites. The clear standardisation supports traceable quality records and straightforward in-house verification routines. Engineered for repeatability and long service life The Form C geometry and the lapped finish reduce contact variability and improve seating during measurement operations, which translates into lower measurement scatter and faster setup times at the inspection bench. Surface finishing by lapping produces a consistent contact zone that minimises localised wear and maintains diameter integrity. The combination of material choice and finish makes the ring suitable as a long-term workshop standard where repeatability and low drift are priorities, while the robust construction tolerates frequent handling and clamping without degrading the reference surface. Seamless integration into quality workflows Designed for direct incorporation into calibration stacks and fixture setting procedures, the ring supports efficient workflow design: reference stacks, gauge comparisons and quick pass/fail checks become more reliable when based on a certified mechanical standard. The nominal 95 mm size matches common shaft and arbor dimensions, so the part is practical for both machine-tool set-up and incoming inspection tasks. Clear conformity to standards aids documentation and audit trails, and the compact, standardised form factor simplifies storage and handling in busy metrology labs and production environments. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine setting ring can be integrated into existing calibration procedures and to arrange supply or batch verification Technical data SKU: M313.095 GTIN: 4054469121017 Tariff code: 90173000 Category: Gauges / Setting rings Form: C Core specifications Nominal diameter: 95 mm Material: Hardened, lapped gauge steel Tolerance class: JS 3 (DIN 2250 / DIN 286) ECLASS: 21170104 Features Conforms to DIN 2250 and DIN 286 Hardened and lapped finish for low wear Form C configuration for standardised use Manufacturer: Metav IndustryLine FAQ What tolerance class does the setting ring meet? The setting ring meets JS 3 tolerance and is manufactured in accordance with DIN 2250 and DIN 286, providing a standardised reference for comparative checks. What material and finish are used on this gauge? The ring is produced from hardened, lapped gauge steel, which gives a wear-resistant contact surface and supports long-term dimensional stability. For which applications is this 95 mm ring suitable? This 95 mm gauge ring is suitable for shaft and bore setting, master gauge stacks and routine inspection tasks where a compact, standardised reference is required. How does the Form C profile affect usage? Form C supplies a standardised seating geometry that eases mounting in fixtures and ensures consistent contact during comparative measurements. Who manufactures this setting ring? The part is supplied under the Metav IndustryLine label and intended for integration into workshop and metrology environments as a practical mechanical reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
98mm Limit Plug Gauge, H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
The product data contains contradictory entries: the item is marked both as 'scrap' and as 'good', and the weight is inconsistent (label shows 3.3 kg while the recorded weight is 3.5 kg). These discrepancies create confusion and may lead to errors in processing or inventory management. It is essential to ensure that all product information is accurate and consistent to avoid potential issues. Please review the data thoroughly, correct these discrepancies, and resubmit the complete product information with verified details. Accurate records are crucial for maintaining operational efficiency and ensuring that all relevant systems function correctly.
98mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of a hardened, lapped gauge steel construction combined with conformity to DIN 2250 and DIN 286, delivering reproducible setting and verification for precision fixtures; order directly via Metav Werkzeuge or consult our specialists for application advice. M313.098 Setting Ring 98 mm (Form C) — Hardened, Lapped Gauge Steel by Metav IndustryLine The M313.098 is a setting ring designed for dimensional control and gauge setting in metrology and workshop inspection, supplied in a Form C profile for secure seating. Hardened, lapped gauge steel construction Compliant with DIN 2250 and DIN 286 Form C seating for reliable engagement Nominal diameter 98 mm Reduce rework with consistently measurable reference hardware A precisely manufactured ring gauge minimises uncertainty at the point of inspection. Manufactured from hardened, lapped gauge steel, this setting ring provides a stable reference surface that resists wear and retains roundness over repeated use. The result is fewer measurement-related rejects and a reduction in set-up time on fixtures, supporting faster throughput and predictable quality control in serial production. Built to standards for traceable inspection routines Conformity to DIN 2250 and DIN 286 ensures the gauge aligns with accepted metrological practice; the tolerance grade JS 3 describes the permitted deviation band for the nominal size. Such standardisation simplifies documentation in quality systems and facilitates traceability during audits. Integrating a standardised ring into inspection processes streamlines calibration cycles and aligns internal procedures with industry expectations. Geometry and surface finish that aid repeatability The Form C profile gives secure seating in holders and gauges, reducing play during measurement and preventing misalignment. A lapped finish delivers a controlled surface roughness that supports consistent contact conditions with mating parts. These aspects combine to make the component a reliable reference when setting go/no-go gauges, calibrating comparators or verifying bore-cutting operations. Practical advantages on the shop floor and in the lab Compact handling and clearly defined specification data reduce time spent selecting reference artefacts. As a nominal 98 mm standard, this ring suits many common bore and fixture checks without requiring bespoke tooling. The robust construction of this Metav IndustryLine product supports frequent use in production environments while maintaining measurement integrity, which in turn lowers process variability and supports continuous improvement initiatives. Discuss the M313.098 with Metav Werkzeuge to confirm fit for purpose and to arrange supply from stock or scheduled delivery Technical data Article number: M313.098 GTIN: 4054469121024 ECLASS: 21170104 Facts Nominal diameter: 98 mm Tariff number: 90173000 Special features Material: hardened and lapped gauge steel Form C seating profile Standards: DIN 2250 and DIN 286, JS 3 Category: setting rings / gauges Brand: Metav IndustryLine FAQ What is the intended use of this setting ring? The M313.098 setting ring from Metav IndustryLine serves as a dimensional reference for setting and verifying bore gauges, fixtures and inspection equipment where a 98 mm nominal standard is required. Which standards govern the tolerances of this ring? Tolerances follow DIN 2250 and DIN 286 with grade JS 3 specified; these standards define permissible deviations and ensure the ring meets recognised metrological practice. How does the lapped surface affect measurements? A lapped finish reduces surface irregularities and improves contact repeatability; the lapped gauge steel surface on this ring helps deliver consistent measurement results over prolonged use. Is this ring suitable for production use? Yes — the hardened construction and Form C seating make the ring robust for regular shop-floor inspection tasks and routine calibration work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9–10mm Gauge Pin Set 100pcs 70mm Step 0.01mm, Special Steel, Boxed - Metav IndustryLine
Reliable dimensional control is achieved through the combination of 0.01 mm gradation, a 9.00–10.00 mm size range and a matched 100-piece configuration, enabling fast, repeatable go/no‑go checks in production. Order the pin gauge set directly via Metav Werkzeuge or consult our technical advisors for specification support. Pin gauge set M318.859 — Metav IndustryLine (100-piece, 9.00–10.00 mm, 0.01 mm) The Pin gauge set M318.859 provides matched pins in the 9.00–10.00 mm range with 0.01 mm increments, designed for precision inspection and quick acceptance tests in machining and quality control. 0.01 mm gradation for fine tolerance checks Size range 9.00–10.00 mm for small-bore inspection 70 mm length for secure engagement in bores Delivered in protective transport case Consistent accuracy for production‑grade inspection A matched pin set with 0.01 mm steps offers a straightforward, reliable method to verify hole diameters and fit tolerances without complex equipment. The set’s fine gradation reduces interpretation error and accelerates decision-making on the shop floor: operators can perform stepwise checks and immediately determine whether a component meets nominal dimensions or requires rework. Built from special steel, the pins combine wear resistance with dimensional stability, which helps maintain consistent measurement quality over many inspection cycles. Practical handling and process benefits Each pin measures 70 mm in length, providing sufficient engagement depth to reduce measurement uncertainty in through‑holes and deeper bores. The matched nature of the set—delivered as a 100-piece kit—supports rapid sampling across batches, which minimises machine downtime and speeds up in‑process control. The compact organisation inside a protective transport case preserves set order and prevents loss of individual pins during storage or transfer between workstations, supporting efficient workflow and traceable inspection routines. Integration into quality workflows and traceability As a straightforward go/no‑go tool, the pin gauge set integrates seamlessly into quality plans and first-off inspections. The numeric gradation and fixed sizes simplify documentation and reporting: a single line in an inspection sheet can record the smallest acceptable pin or the first non‑passing size, enabling clear communication between inspection, production and engineering. For environments that demand repeatability, the special steel composition and dimensional matching are practical assets when establishing a robust measurement routine or defining control limits. Why this kit suits precision workshops Precision workshops, toolrooms and small-bore production lines benefit from the set’s balance of range and resolution. The 9.00–10.00 mm scope addresses many common bore diameters found in hydraulic components, fastener seats and small housings, while the 0.01 mm step size supports fine adjustment work during finishing and honing. The arrangement supports both quick pass/fail checks and more methodical narrowing‑down of machining errors, reducing scrap rates and aligning with lean quality principles. Choose the Metav IndustryLine pin gauge set for dependable dimensional control and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and supply Technical Data Article number: M318.859 GTIN: 4054469182117 Weight: 5.5 kg Length: 70 mm Measuring range: 9.00–10.00 mm Gradation: 0.01 mm Pieces per set: 100 Facts Material: Special steel Delivered in protective transport case Category: Gauges (Lehren) Set type: Matched pin gauge set Special features Precise 0.01 mm stepping for tolerance control Suitable for small-bore inspection and go/no‑go testing Robust organisation for storage and transport Ideal for shop‑floor sampling and process control FAQ What sizes are included in the pin gauge set? The pin gauge set contains matched pins across the 9.00–10.00 mm range with 0.01 mm increments for fine gradation checks. What material are the pins made from? Pins in this Metav IndustryLine set are made from special steel, chosen for wear resistance and dimensional stability in regular inspection use. Is the set suitable for deep‑bore measurements? With a pin length of 70 mm, the set is well suited to engage through‑holes and deeper bores while keeping measurement uncertainty low. How is the kit supplied and stored? The set is supplied organised in a protective transport case, preserving pin order, preventing damage and easing handling across workstations. Can the pin gauge set be used for go/no‑go checks on production parts? Yes; the matched sizes and 0.01 mm stepping make the set ideal for rapid go/no‑go checks and routine dimensional verification during production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9–10mm Gauge Pin Set 70mm Step 0.05mm, 21 Pieces Plastic Case - Metav IndustryLine
Combine 0.05 mm increments, special steel construction and a compact 70 mm pin length for fast, repeatable dimensional checks; order the set directly via Metav Werkzeuge or consult our advisors if guidance is required. Pin gauge set M318.829 — 21-piece, 9.00–10.00 mm, 70 mm pins (Metav IndustryLine) The pin gauge set M318.829 is a precision 21-piece plug-pin set intended for verification of small bores and dimensional checks in workshop and inspection environments. Precision pins 9.00–10.00 mm in 0.05 mm steps 21-piece set for incremental gauge checks 70 mm pin length for deep bore measurements Supplied in protective transport case Fast, repeatable checks for small-bore inspection The 21-piece plug-pin collection enables straightforward verification of bore diameters within the 9.00–10.00 mm range using systematic 0.05 mm increments. Designed for shop-floor inspection routines, the set supports rapid pass/fail decisions and stepwise narrowing of tolerances. The compact pin length is deliberately chosen to reach moderate depths while keeping handling comfortable and measurement times short. This combination of consistent increments and ergonomic dimensions reduces setup time and increases throughput during serial checks. Robust material and measured performance for everyday use Manufactured from special steel, the pins offer a durable contact surface that withstands repeated use in production and quality-control environments. The material choice balances wear resistance with machinability, ensuring long-term dimensional stability under normal workshop conditions. Where traceable calibration is required, the set can be integrated into existing inspection routines; the inherent precision of the 0.05 mm steps simplifies documentation of measurement progress and supports clear communication across quality teams. Organised set and secure transport for reliable inventory handling The pins are supplied as a complete 21-piece set in a protective transport case, which keeps items organised and ready for inspection tasks. The case facilitates safe storage and reduces the risk of individual loss or damage during transport between workstations or to an inspection bench. For workshops aiming to streamline inspection logistics, the compact kit format makes it straightforward to issue a complete gauge set to a team or bench without additional preparation. Contact Metav Werkzeuge for application advice and immediate availability from Emmerich, or request technical guidance from our consultants at Metav Werkzeuge if compatibility with specific inspection routines needs clarification Technical data Article number: M318.829 GTIN: 4054469182018 Manufacturer: Metav IndustryLine Facts Pin length: 70 mm Measuring range: 9.00–10.00 mm Increment: 0.05 mm Set quantity: 21 pins Weight: 1.47 kg Special features Material: special steel Delivered in protective transport case Graduated in 0.05 mm steps FAQ What sizes are included in the set? The pin gauge set M318.829 comprises pins covering the 9.00–10.00 mm range in 0.05 mm increments for systematic diameter checks. How many pieces are supplied and what is the pin length? A complete 21-piece set is supplied, each pin having a length of 70 mm to permit checks at moderate depths. Is the material specified for industrial use? The pins are produced from special steel, chosen for wear resistance and stability under regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 1 1/2" Pipe Thread Go Ring Gauge, Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
A hardened gauge-steel ring provides reproducible assessment of external Whitworth pipe threads to DIN ISO 228, combining traceable conformity and robust wear resistance for stable inspection results; order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. Pipe thread ring gauge G 1 1/2 (Whitworth, right-hand) — hardened gauge steel, DIN ISO 228 The Pipe thread ring gauge G 1 1/2 (Whitworth, right-hand) is a hardened inspection gauge designed for fast, repeatable verification of external Whitworth pipe threads in production and incoming inspection. Hardened gauge steel construction Complies with DIN ISO 228 Right-hand Whitworth thread G 1 1/2 Tolerance class A, pitch 11 Assured conformity for routine thread inspection The ring gauge facilitates a clear go/no-go decision during rapid checks, helping to prevent assembly problems and rework. Constructed from hardened gauge steel, the tool resists wear and preserves the thread reference over extended use, which supports consistent acceptance criteria in production. The adherence to DIN ISO 228 ensures compatibility with industry-standard pipe-thread definitions, so inspection outcomes are directly comparable across suppliers and contracts. Robust design for repeatable measurements With a focus on durability and stability, the inspection ring delivers repeatable results even in workshop environments. The tolerance class A classification and pitch 11 specification mean the gauge inspects threads within a tight tolerance band, making it suitable for quality-sensitive applications. The compact mass (≈ 0.82 kg) and sturdy construction simplify handling during multiple checks without compromising the integrity of the measuring surface. Integrating the gauge into quality workflows The right-hand Whitworth thread form in size G 1 1/2 is commonly encountered in pipe and fitting assemblies; the ring gauge serves as a reliable final inspection tool before parts enter assembly or leave the supplier. Using a dedicated ring for thread verification reduces subjective judgement during manual checks and supports documented quality routines. The clear physical pass/fail criterion shortens inspection time and contributes to a more efficient production flow. Contact Metav Werkzeuge today to secure consistent thread inspection — Metav Werkzeuge in Emmerich supplies the G 1 1/2 ring gauge and can advise on integration into existing quality procedures. Technical Data Article number: M315.410 GTIN: 4054469127286 Weight: 0.82 kg Material: Lehrenstahl, hardened Standard: DIN ISO 228 Size: G 1 1/2" Tolerance class: A Facts Pitch: 11 Thread form: Whitworth Handedness: Right-hand Special features Hardened gauge steel construction Intended for external pipe-thread inspection Category: Lehren / Messstifte FAQ What thread standard does this ring gauge check? The ring gauge verifies external pipe threads to DIN ISO 228, using the Whitworth profile specified for G 1 1/2 size. Is the gauge suitable for production end-of-line checks? Yes, the hardened ring gauge (SKU M315.410) is designed for repeated go/no-go checks in production and incoming inspection for Whitworth pipe threads. What does tolerance class A mean for acceptance criteria? Tolerance class A indicates a tight acceptance band; the M315.410 ring gauge enforces a strict limit for pass/fail decisions during visual or tactile inspection. Which thread form and handedness are supplied? The instrument checks a right-hand Whitworth external pipe thread in size G 1 1/2 with pitch 11. Who supplies this gauge and where is it available from? The item is offered under Metav IndustryLine and can be ordered through Metav Werkzeuge; technical details and availability are provided by the supplier. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 1 1/2" Pipe Thread Go Ring Gauge, Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Precision, conformity to DIN ISO 228 and a hardened gauge steel construction make this GO ring gauge a reliable choice for routine thread inspection; procure the GO ring gauge directly via Metav Werkzeuge or consult the specialists for adaptation to specific production tolerances. Thread Ring Gauge G 1 1/2" GO Whitworth (right-hand) — Metav IndustryLine A Thread Ring Gauge G 1 1/2" GO Whitworth (right-hand) designed for repeatable verification of Whitworth pipe threads according to DIN ISO 228 in workshop and production environments Hardened gauge steel for long service life Manufactured to DIN ISO 228 tolerances Tolerance class A for go/no-go inspection Reliable, repeatable checks for fast production control The GO ring gauge is tailored for rapid acceptance testing of Whitworth pipe threads, offering a straightforward pass/fail decision that helps maintain assembly quality and minimise rework. Made from hardened gauge steel, the tool resists wear under frequent use, which preserves the thread form and ensures consistent results over time. The simple GO-only design reduces inspection time while delivering the precision required for production sampling and final checks. Built to standards for traceable conformity Conformity with DIN ISO 228 provides a clear technical basis for inspection routines and quality documentation. The device’s tolerance class A is suited to go/no-go gauging in industrial settings where nominal thread form must be confirmed quickly. By relying on established standards, the gauge integrates into existing QC processes and supports supplier acceptance criteria, making it an effective tool for both incoming inspection and in-process control. Practical workshop benefits and handling The ring gauge’s compact, robust shape and a weight of approximately 0.71 kg facilitate easy handling on the shop floor and at inspection benches. Its designation as a GO gauge simplifies the decision chain: a correct fit confirms conformity, while any interference signals non-compliance. For operators and inspectors, this clarity reduces ambiguity during checks and accelerates throughput without compromising the integrity of the inspection. Typical uses and material suitability Engineered specifically for Whitworth pipe threads, the gauge is intended for right-hand G 1 1/2" thread forms commonly encountered in pipework and fittings. Its construction makes it appropriate for repeated checks in mechanical workshops, maintenance departments and production lines where Whitworth standards apply. The tool supports routine quality assurance tasks by delivering a fast, standardised verification method that aligns with industrial inspection protocols. Request procurement advice from Metav Werkzeuge for this Metav IndustryLine G 1 1/2" GO Whitworth thread ring gauge or arrange delivery and specification confirmation directly from Emmerich Technical Data Article number: M315.330 GTIN: 4054469127163 Weight: 0.71 kg Material: gauge steel, hardened Standard: DIN ISO 228 Nominal size: G 1 1/2" Dimensions & core data Pitch: 11 Tolerance class: A Features & applications Type: GO (thread ring gauge) Thread form: Whitworth, right-hand Manufacturer: Metav IndustryLine FAQ What does the GO designation mean for this ring gauge? The GO designation indicates a pass-only ring gauge; the Thread Ring Gauge G 1 1/2" GO Whitworth (right-hand) is used to confirm that a thread falls within acceptable limits by passing freely onto the component. Is the gauge suitable for production spot checks on Whitworth fittings? Yes, the Metav IndustryLine thread ring gauge G 1 1/2" GO Whitworth (right-hand) is designed for rapid production and incoming inspection of Whitworth pipe threads. Which standard does the ring gauge comply with? The tool is manufactured to DIN ISO 228, providing a recognised reference for thread form and inspection practices. What material is the gauge made from and why does that matter? Constructed from hardened gauge steel, the gauge offers high wear resistance and dimensional stability, which prolongs service life and maintains reliability during frequent checks. What does tolerance class A signify for inspection use? Tolerance class A designates the acceptable dimensional tolerance for go/no-go gauging in industrial inspections; the G 1 1/2" GO Whitworth gauge therefore suits standard production tolerance verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 1 1/2" Pipe Thread Plug Gauge Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Hardened gauge steel and compliance with DIN ISO 228 deliver durable, repeatable thread checks for routine inspection. The combination of a clear Whitworth profile and Medium tolerance ensures reliable conformity testing across standard pipework. Order the pipe thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Pipe thread plug gauge G 1 1/2" Whitworth (right-hand) — Metav IndustryLine, hardened gauge steel The Pipe thread plug gauge G 1 1/2" Whitworth (right-hand) is a compact inspection instrument for verifying Whitworth pipe-thread geometry according to DIN ISO 228, suitable for workshop and quality‑control routines. Hardened gauge steel construction DIN ISO 228 compliant thread form Medium tolerance class for standard inspection Right‑hand Whitworth G 1 1/2" profile Assured dimensional precision for standard pipe threads The gauge offers a stable reference for routine thread inspection, helping to reduce rework and avoid installation issues. Manufactured from hardened gauge steel, the plug retains its form under repeated use, which supports repeatability in checks. The Whitworth profile and the specification to DIN ISO 228 mean that measurements align with established workshop standards, enabling consistent pass/fail decisions during incoming inspection or final assembly. Robust construction that withstands workshop handling Designed for practical everyday use, the plug gauge combines a compact profile with a weight of 0.82 kg for confident handling and straightforward placement in gauges or fixtures. Hardened gauge steel provides wear resistance and long service life, reducing the frequency of replacements and downtime. The Medium tolerance rating balances manufacturing cost and inspection strictness, making the instrument appropriate for most machine‑shop and plumbing applications. Clear technical conformity reduces uncertainty in production With the Whitworth thread geometry specified as G 1 1/2" and a declared pitch of 11, the instrument gives a direct indication of thread form conformity according to international practice. Using a dedicated plug gauge for right‑hand pipe threads streamlines inspection workflows and offers an objective basis for acceptance criteria. For companies standardising quality procedures, the tool supports reliable documentation of routine checks and simplifies communication between production and quality departments. Integration into quality processes and responsible sourcing As part of the Metav IndustryLine range, the gauge benefits from Metav’s quality screening at the Emmerich facility, which aims to make precise measuring tools readily accessible to workshops and industry. The instrument’s straightforward design reduces training time for operators while supporting traceable measurement practices that form the backbone of a functioning quality system. Contact Metav Werkzeuge for availability and specification advice on the Metav IndustryLine pipe thread plug gauge G 1 1/2" Whitworth (right-hand) and ensure the right tolerance fit for current inspection needs Technical data Article number: M315.310 GTIN: 4054469127040 Weight: 0.82 kg Thread size: G 1 1/2" Whitworth, right-hand Material: hardened gauge steel Standard: DIN ISO 228 Tolerance class: Medium Facts Pitch: 11 Tariff code: 90173000 Weight: 0.82 kg SKU: M315.310 Special features Hardened gauge steel construction Right‑hand Whitworth thread profile DIN ISO 228 conformity Medium tolerance suitable for standard inspections Categories: measuring pins; gauges FAQ What thread type does this gauge check? The plug is made for Whitworth pipe threads specified as G 1 1/2" (right‑hand) and conforms to DIN ISO 228 for non‑pressure‑tight pipe thread forms. Is the material suitable for repeated workshop use? Yes, the plug gauge is manufactured from hardened gauge steel, giving wear resistance suitable for routine inspection cycles. What tolerance class is applied to the gauge? The instrument is supplied with a Medium tolerance class, designed to meet the needs of standard quality control without the expense of ultra‑fine classes. Can the Metav IndustryLine gauge be referenced in documentation? Documentation and traceability are straightforward: reference the Metav IndustryLine pipe thread plug gauge (SKU M315.310, GTIN 4054469127040) in inspection records for clear identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 1 1/4" Pipe Thread Go Gauge Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of a robust combination of DIN ISO 228 conformity and hardened gauge steel for dependable thread verification. The right‑hand G 1 1/4 Whitworth plug gauge with Medium tolerance provides quick go/no‑go checks and long service life; order the gauge directly via Metav Werkzeuge or ask our consultants if needed. Pipe thread plug gauge G 1 1/4 Whitworth, right‑hand — hardened gauge steel, DIN ISO 228 (Metav IndustryLine) The Pipe thread plug gauge G 1 1/4 Whitworth, right‑hand serves as a precision go/no‑go gauge for checking Whitworth pipe threads to DIN ISO 228 in production and inspection environments. Hardened gauge steel construction Conforms to DIN ISO 228 Medium tolerance class for general use Reliable conformity for consistent quality control The gauge is designed primarily for fast, repeatable thread verification and conforms to DIN ISO 228, which guarantees a common reference for pipe thread form and fit. With a thread form specified as G 1 1/4 Whitworth and a pitch parameter of 11, the tool enables straightforward acceptance checks: the gauge either enters (go) or it does not (no‑go), making pass/fail decisions unambiguous. This approach reduces uncertainty on the shop floor and shortens inspection cycles, delivering measurable efficiency gains in routine quality assurance processes. Durable construction that reduces downtime Manufactured from gauge steel, hardened, the gauge resists wear from repeated engagement and preserves dimensional integrity over time. The right‑hand thread profile is finished to industrial standards and the device’s compact mass (approximately 0.71 kg) supports easy handling while remaining robust in daily use. The Medium tolerance rating balances manufacturability and precision, making the gauge suitable for series production or incoming inspection without requiring over‑specification. Fewer replacements and less recalibration mean lower lifetime maintenance effort. Practical benefits for workshop and inspection tasks This plug gauge is suitable where quick thread acceptance is needed—assembly lines, incoming goods inspection or maintenance work on pipe fittings. The simple go/no‑go principle speeds routine checks, reducing rework and preventing assembly errors before they propagate. Backed by the Metav IndustryLine range, the tool is supplied with traceable identification (GTIN: 4054469127033) and clear conformity to recognised standards, which strengthens documentation and audit trails for quality management. Confidence in measurement leads to smoother production flow and fewer interruptions. For reliable thread verification choose the Metav IndustryLine G 1 1/4 Whitworth plug gauge — contact Metav Werkzeuge in Emmerich for ordering and technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.309 GTIN: 4054469127033 Weight: 0.71 kg Facts Thread size: G 1 1/4" Pitch: 11 Tariff number: 90173000 Special features Material: gauge steel, hardened Standard: DIN ISO 228 Tolerance class: Medium Thread direction: right‑hand Category: Lehren / Messgeräte FAQ What is the primary purpose of this plug gauge? The plug gauge is intended for go/no‑go verification of Whitworth pipe threads in accordance with DIN ISO 228, enabling rapid acceptance checks during production or inspection. Which thread form and size does the gauge check? This gauge checks G 1 1/4 Whitworth pipe threads; the device is manufactured to match the corresponding thread form and pitch specifications. How does the Medium tolerance class affect usability? Medium tolerance provides a balance between achievable manufacturing accuracy and reliable fit assessment, making the gauge suited for standard industrial and workshop applications. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure a long service life under frequent use. Is the plug gauge traceable for documentation purposes? Yes; the device is supplied with product identification (GTIN: 4054469127033) and clear references to the applicable standard for inclusion in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 1 1/4" Whitworth Pipe Thread Go Ring Gauge Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of a durable, standards‑conforming thread gauge that combines hardened gauge steel, DIN ISO 228 compliance and Tolerance class A accuracy to secure reliable in‑process inspection and reduce rework. Order the G 1 1/4 Whitworth GO ring directly via Metav Werkzeuge or consult our technical team for specification support. Rohrgewinde‑Lehrring G 1 1/4" — Whitworth GO ring, right‑hand, hardened gauge steel Rohrgewinde‑Lehrring G 1 1/4" serves as a go/no‑go verification ring for right‑hand Whitworth pipe threads and is designed for rapid, repeatable thread checks in production and incoming inspection. Right‑hand Whitworth G 1 1/4" thread gauge ring Hardened gauge steel construction for long life Compliance with DIN ISO 228 thread standard Tolerance class A precision for tight control Ensure fast, reliable thread acceptance in production The GO ring functions as a tactile pass indicator for threaded pipe fittings, enabling swift acceptance checks on production lines and at goods‑in. Built from hardened gauge steel, the ring resists wear and maintains form for extended service life, which reduces the frequency of replacements and keeps inspection cycles predictable. The slim, ring‑type design allows quick engagement with mating parts, providing a binary result that is easy to record in manufacturing documentation and quality logs. Reduce rejects and trace production quality to standards By specifying a gauge that conforms to DIN ISO 228, quality managers gain a measurable basis for acceptance criteria and supplier control. The Tolerance class A designation indicates tighter manufacturing limits, which supports higher first‑pass yields and fewer customer returns. Using a dedicated thread gauge for Whitworth pipe threads helps to identify process drift early, thereby lowering scrap and rework costs and preserving machine uptime. Durable construction for workshop and shopfloor use The component’s gauge steel, hardened construction offers corrosion resistance and dimensional stability under regular handling. At a mass of 0.74 kg, the ring balances robustness with ease of handling for routine inspections. The simple geometry of a GO ring reduces the chance of misinterpretation: a full entry indicates conformity, while any interference signals the need for corrective action. This clear feedback loop supports efficient quality control without complex measurements. Practical benefits for procurement and inspection teams A dedicated GO ring for G 1 1/4" Whitworth threads streamlines routine checks, shortens inspection time and clarifies acceptance criteria across shifts. The ring is suitable for integration into standardised inspection procedures and jigs, making it straightforward to incorporate into existing quality workflows. Documentation of gauge identity (GTIN and article references) supports traceability and audit readiness for regulated or certified production environments. Specify the Metav IndustryLine G 1 1/4" Whitworth GO ring from Metav Werkzeuge for robust, standards‑based thread control and contact Metav Werkzeuge for technical allocation or procurement guidance Technical data Article number: M315.329 GTIN: 4054469127156 Weight: 0.74 kg Thread size: G 1 1/4" Pitch: 11 Facts Standard: DIN ISO 228 Tolerance class: A Tariff code: 90173000 Special features Material: gauge steel, hardened Type: GO ring for Whitworth pipe threads Handedness: right‑hand thread verification Quality: factory good status indicator FAQ What is the intended use of this GO ring? The G 1 1/4" Whitworth GO ring is intended for quick go/no‑go verification of right‑hand pipe threads, used to confirm thread conformity during production and incoming inspection. How precise is the thread verification with this ring? Verification follows the Tolerance class A specification; the GO ring provides a direct acceptance check aligned with the DIN ISO 228 thread standard. What material is the gauge made from and why does it matter? The gauge is manufactured from hardened gauge steel, which ensures wear resistance and dimensional stability for prolonged use on the shopfloor. Can the ring be used for non‑Whitworth threads? The ring is produced specifically for Whitworth pipe threads at G 1 1/4"; use with other thread forms or sizes is not appropriate for acceptance decisions. Which identifiers help with inventory and traceability? The article number M315.329 and GTIN 4054469127156 provide clear references for procurement records and audit trails. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com