Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
G 3/8" Pipe Thread Go Gauge, Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of precise thread verification for repeatable assembly quality and reduced rework: hardened gauge steel construction combined with DIN ISO 228 conformity ensures reliable inspection of Whitworth pipe threads; order directly via Metav Werkzeuge or consult our specialists for selection and supply. M315.303 Pipe thread plug gauge, G 3/8 Whitworth — hardened gauge steel, DIN ISO 228 The M315.303 is a right-hand pipe thread plug gauge designed for rapid go/no-go verification of G 3/8 Whitworth threads in production and inspection workflows. Hardened gauge steel construction Conforms to DIN ISO 228 Right-hand G 3/8 Whitworth thread Consistent verification that reduces production rejects This plug gauge combines hardened gauge steel with a compact, robust geometry to provide predictable wear behaviour and long service life. Inspectors and machine operators benefit from clear go/no-go assessment, which supports faster decision-making on the shop floor and reduces the volume of rework. The direct thread check shortens cycle times during final inspection and in-process control while maintaining repeatable results. Suited to production and workshop environments With a compact weight of 0.103 kg and a solid feel, the gauge is easy to handle at the bench or beside turning and fitting stations. The right-hand Whitworth thread form and the specified G 3/8 size match common pipe-threaded components, making the device appropriate for mechanical workshops, valve and fitting manufacturers, and general maintenance departments. The simple design requires minimal operator training and facilitates quick spot checks without interrupting production flow. Standards compliance for traceable quality assurance Manufactured to DIN ISO 228, the gauge supports standardised inspection routines and internal quality documentation. The stated tolerance class: Medium provides an effective balance between strict conformity and durability in everyday use. Numerical data such as the 19 tpi pitch and thread designation give clear, objective criteria for acceptance or rejection, aiding documented quality systems and supplier control processes. Durability and practical handling for frequent use The hardened material and compact form factor were chosen for repeated engagement with threaded parts: resistance to surface damage and consistent mating preserve measurement certainty over many cycles. The design minimises burr accumulation and simplifies cleaning, while the visible thread form enables immediate tactile feedback during checks. This plug gauge supports efficient inspection routines without introducing complex handling steps. Choose the Metav IndustryLine plug gauge for dependable thread verification and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich. Technical data SKU: M315.303 GTIN: 4054469126975 Weight: 0.103 kg Thread size: G 3/8" Pitch: 19 tpi Material: Gauge steel, hardened Standard: DIN ISO 228 Tolerance class: Medium Tariff number: 90173000 Numbers / Core technical data Weight (kg): 0.103 Pitch (threads per inch): 19 Tariff number: 90173000 Designs / Special features Right-hand Whitworth thread form Hardened gauge steel construction Medium tolerance class Category: Gauges / Plug gauges Intended application: Thread verification for pipe fittings FAQ What thread size and standard does this gauge check? The M315.303 plug gauge checks G 3/8 threads and complies with DIN ISO 228, suitable for Whitworth pipe-thread inspections. Is the gauge suitable for routine shop-floor checks? Yes, the hardened construction and compact mass (0.103 kg) make this plug gauge well suited to frequent use in production and workshop environments. What does the pitch value indicate? The listed pitch of 19 tpi denotes the thread density used for the Whitworth G 3/8 designation and provides an objective acceptance criterion during inspection. Which tolerance class applies to the gauge? This gauge is supplied in a Medium tolerance class, offering a balanced compromise between measurement strictness and operational durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 5/8" Pipe Thread Go Ring Gauge Right-Hand Whitworth, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
The supplied product data contain conflicting thread specifications that prevent a reliable product description: the designation "G 5/8" and the referenced standard "DIN ISO 228" indicate a parallel pipe thread (BSP), whereas the explicit mention of "Whitworth" (Whitworth thread form) points to a different system. These two thread systems are not interchangeable; without clarification of the intended standard and exact thread form it is not possible to generate an accurate technical or commercial text. Please verify which thread standard applies and confirm whether the item is a BSP parallel ring gauge or a Whitworth-type gauge, and supply any missing confirmation such as the exact pitch specification and intended application. For assistance in resolving the discrepancy or to provide corrected data, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930. Once the specifications are consistent, a complete product description can be produced.
G 5/8" Pipe Thread Go Ring, Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of a durable inspection tool that combines hardened gauge steel and tolerance class A to secure repeatable Go testing for Whitworth pipe threads; the compact, right‑hand design speeds up in‑process checks while complying with DIN ISO 228. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge G 5/8 GO Whitworth — right‑hand inspection gauge, hardened steel, tolerance A (Metav IndustryLine) A Thread ring gauge G 5/8 GO Whitworth for right‑hand Whitworth pipe threads, designed for fast Go checks and routine inspection in workshop and quality control environments. Hardened gauge steel construction Conforms to DIN ISO 228 Tolerance class A for tight control Right‑hand Whitworth G 5/8 thread Faster, more reliable Go inspection for production workflows The ring gauge delivers measurable efficiency in routine thread verification: the GO function allows immediate pass confirmation for G 5/8 Whitworth threads, reducing stoppages and rework. Manufactured from hardened gauge steel, the tool maintains its form under frequent use, which preserves measurement integrity and extends service intervals. By choosing a tolerance class A gauge, shops gain a tighter acceptance window that supports consistent part interchangeability and fewer downstream rejects. Robust construction that pays off over time Built for repetitive use, the inspection ring combines material hardness and a concise design to resist wear and maintain thread fidelity. The hardened gauge steel body withstands contact stresses typical of Go/no‑Go checks, ensuring the ring keeps its calibration over many inspection cycles. Its compact mass and balanced geometry also simplify handling on shop floors and inspection benches, so operators can carry out checks quickly and with less fatigue. Clear technical match to Whitworth pipe threads and standards Designed specifically for the Whitworth pipe form specified as G 5/8, the gauge references the thread profile and pitch relevant to pipe fittings; the data field shows a pitch value of 14, matching the intended thread specification. Compliance with DIN ISO 228 indicates the gauge is produced to recognised European flange and thread conventions, making it suitable for mechanical workshops, maintenance departments and quality labs that require standardised verification procedures. Integration into quality systems and traceability The compact inspection ring supports traceable production checks and part release routines: the product entry includes a unique GTIN and a manufacturer SKU, enabling straightforward inventory and audit documentation. The ring’s defined tolerance class and adherence to DIN ISO 228 help integrate inspection results into quality records and control plans, contributing to demonstrable conformity during internal or customer audits. For reliable Go testing with Metav IndustryLine quality, request further specification or a procurement proposal from Metav Werkzeuge—technical consultants are available to advise on integration and suitable inspection routines; contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.325 GTIN: 4054469127118 Label: Rohrgewinde‑Lehrring G 5/8 GO Whitworth, right‑hand Facts Weight: 0.26 kg Size/designation: G 5/8" Pitch: 14 Special features Material: gauge steel, hardened Standard: DIN ISO 228 Tolerance: class A Thread direction: right‑hand FAQ What is the purpose of this ring gauge? The ring gauge is used as a Go inspection device for Whitworth pipe threads; the Thread ring gauge G 5/8 GO Whitworth confirms whether a threaded part meets the Go acceptance criteria. Which standards does the gauge meet? The tool is produced to the requirements of DIN ISO 228, ensuring the Thread ring gauge G 5/8 GO Whitworth aligns with common European thread verification practices. What materials and durability can be expected? Made from hardened gauge steel, the ring gauge provides wear resistance suitable for frequent Go/no‑Go checks, preserving thread fidelity over prolonged use. How does the tolerance class affect inspection? Tolerance class A defines a tighter acceptance window for Go checks, so the ring gauge offers stricter conformity control when precise interchangeability is required. Is the pitch specified for the gauge? The product data lists a pitch value of 14, corresponding to the thread form specified for this Whitworth pipe thread gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 5/8" Whitworth Pipe Thread Gauge, Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN ISO 228 conformity and a medium tolerance class to secure repeatable thread checks and reduced rework. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Pipe Thread Plug Gauge G 5/8 Whitworth (right-hand) — Metav IndustryLine, hardened gauge steel The Pipe Thread Plug Gauge G 5/8 Whitworth (right-hand) is a precision go/no-go gauge for fast verification of Whitworth pipe threads in inspection benches and workshop quality control. Hardened gauge steel construction Conforms to DIN ISO 228 thread standard Medium tolerance class for general use Right-hand Whitworth thread G 5/8 Reliable inspection for routine thread checks A dedicated go/no-go inspection routine benefits directly from a purpose-made plug gauge. Manufactured from hardened gauge steel, this tool resists wear and preserves the reference geometry during repeated use, which reduces measurement drift and the need for frequent replacements. Conformity to DIN ISO 228 provides a clear dimensional basis, allowing production and QA teams to compare results objectively and maintain process stability. The result is fewer stoppages and more consistent throughput on the shop floor. Balanced tolerance and practical application Built to a medium tolerance class, the gauge offers a pragmatic compromise between strict laboratory grades and rough shop fittings; it is suitable for routine acceptance testing and in-process checks. The right-hand G 5/8 Whitworth form with a listed pitch (steigung) 14 enables compatibility with common Whitworth pipe fittings and components. This combination supports machinists and inspection personnel who require a robust, repeatable check without the sensitivity (and cost) of ultra‑high‑precision artefacts. Durable construction that simplifies everyday use Design choices favour operational efficiency: the hardened material and compact form factor make the gauge easy to handle and less susceptible to accidental damage. As a consequence, maintenance intervals lengthen and calibration cycles are simplified. Using a dedicated thread plug gauge for routine checks translates into quicker go/no-go decisions at assembly stations and clearer acceptance criteria for incoming and outgoing goods. Integration into workshop routines and traceability Although not a measuring instrument for continuous dimension logging, the gauge integrates well into standard QA workflows as a rapid pass/fail control. Its straightforward use supports operators with varying experience levels and contributes to reproducible quality gates. For projects that demand traceable documentation, the combination of a standardised thread form and a clear tolerance class simplifies record keeping and auditability within production and inspection documentation. For application-specific guidance or to arrange supply of the Metav IndustryLine pipe thread plug gauge, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on suitability and delivery options. Technical data Article number: M315.305 GTIN: 4054469126999 Weight: 0.23 kg Material: Gauge steel, hardened Thread size: G 5/8" Pitch: 14 Standard: DIN ISO 228 Tolerance class: Medium Customs tariff number: 90173000 Core measurements Weight: 0.23 kg Thread designation: G 5/8" Pitch value: 14 GTIN: 4054469126999 Special features Right-hand Whitworth pipe thread form Hardened construction for wear resistance Conforms to DIN ISO 228 Categorised for gauges and plug gauges Suitable for routine go/no-go verification FAQ What is the primary use of this plug gauge? The plug gauge is designed for rapid go/no-go verification of G 5/8 Whitworth pipe threads and is intended for routine inspection and shop-floor acceptance checks. Which material is the gauge made from? This Metav IndustryLine gauge is manufactured from hardened gauge steel, providing durability and resistance to wear during repetitive use. What standard does the thread form comply with? The thread form on the plug gauge complies with DIN ISO 228, giving a standard reference for dimensions and tolerances in pipe threads. What does the medium tolerance class mean in practice? A medium tolerance class balances manufacturability and repeatability; it is suitable for general workshop and QA tasks where robust, repeatable pass/fail decisions are required. What is the article number for ordering or referencing? The product is supplied under article number M315.305, which can be used for ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 7/8" Pipe Thread Gauge, Whitworth Right-Hand, Hardened Plug Gauge, DIN ISO 228 - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN ISO 228 conformity to ensure reliable, repeatable thread checks for Whitworth pipe threads; the compact 0.3 kg design supports efficient workshop inspection. Order the gauge directly via Metav Werkzeuge or consult our technical team for application advice. Pipe thread plug gauge, G 7/8 Whitworth (right-hand) — hardened gauge steel, DIN ISO 228 (Metav IndustryLine) A pipe thread plug gauge G 7/8 Whitworth (right-hand) for rapid go/no-go verification of Whitworth pipe threads in quality control and assembly environments Hardened gauge steel construction DIN ISO 228 compliant thread form Suitable for G 7/8 Whitworth, right-hand Compact 0.3 kg, workshop-friendly Reliable verification reduces rework and downtime The thread plug gauge is designed for fast go/no-go checks that establish whether a pipe connection meets the required form and fit. With a tolerance class Medium and a clearly defined pitch: 14, the tool provides an immediate pass/fail decision that prevents incorrectly threaded parts reaching assembly. This rational inspection step reduces rework, saves machine time and contributes to a consistent workflow on the shop floor. Durable construction for repeated use Manufactured from hardened gauge steel, the gauge resists wear in daily inspection cycles and maintains thread form under frequent use. The robust build ensures long service life and stable checking conditions, which supports predictable maintenance intervals and lowers total cost of ownership. Its compact mass of 0.3 kg makes it easy to handle during rapid sample checks without compromising durability. Standards-based compatibility for traceable inspection Conforming to DIN ISO 228, the device matches the standard geometry for Whitworth pipe threads and integrates with established inspection routines. The gauge is specified for G 7/8 Whitworth thread form and right-hand orientation, offering clear compatibility for workshops and quality departments that rely on standardised checks. Use of a standards-compliant gauge supports traceable quality records and simplifies cross-checking with technical documentation. Practical workshop handling and process benefits The compact format and intuitive use of the plug gauge enable swift spot checks during production or final inspection. A single insertion gives an unequivocal result, enabling technicians to separate acceptable components from those requiring rework immediately. The gauge’s clarity and repeatability help to streamline inspection protocols, improve throughput and strengthen confidence in downstream assembly operations. For standardised, durable thread inspection choose the Metav IndustryLine G 7/8 Whitworth plug gauge and contact Metav Werkzeuge for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.307 GTIN: 4054469127019 Label: Rohrgewinde-Lehrdorn, G 7/8 Whithworth, rechts SKU: M315.307 Facts Weight: 0.3 kg Pitch: 14 Tariff number: 90173000 Special features Material: hardened gauge steel Thread form: G 7/8 Whitworth (right-hand) Standard: DIN ISO 228 Tolerance: Medium FAQ What thread form does this gauge check? The gauge checks the G 7/8 Whitworth pipe-thread form; the plug gauge is specified for right‑hand threads. Is the gauge suitable for routine shop inspection? Yes — the Metav IndustryLine plug gauge is intended for workshop and quality control use, providing rapid go/no-go verification. Which standard does the gauge conform to? Conformity to DIN ISO 228 is stated for the G 7/8 Whitworth thread geometry used by this gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 7/8" Pipe Thread Go Ring Gauge Whitworth Right-Hand Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of a robust inspection tool that combines hardened gauge steel construction with nominal compliance to DIN ISO 228 and a clear tolerance class A designation; note that this item is supplied as an Ausschuss (non‑conforming) article and is therefore suited to non‑critical verification, training or as a spare. Order or request advice directly via Metav Werkzeuge for an informed purchase. Pipe thread ring gauge G 7/8 — right‑hand, hardened gauge steel (Metav IndustryLine) A pipe thread ring gauge G 7/8 designed for quick verification of parallel pipe threads in workshop and inspection environments; right‑hand thread form with 14 tpi, nominally to DIN ISO 228 Hardened gauge steel construction G 7/8 parallel pipe thread, right‑hand Tolerance class A for precise checks Durable construction for dependable shop verification Manufactured from hardened gauge steel, this ring gauge delivers mechanical stability and wear resistance that benefits repeated shop‑floor use. The robust material reduces deformation under normal handling and preserves the functional profile for longer intervals, which supports consistent pass/fail checks. As a nominally DIN ISO 228 product, the ring is intended for parallel pipe thread verification; however, this particular unit is marked Ausschuss (non‑conforming), so it is best applied where absolute certification is not mandatory, such as training, process trials or as a cost‑effective spare. Technical compatibility and practical benefits With a thread pitch of 14 tpi and a right‑hand thread form, the gauge corresponds to the conventional G‑series dimensions and is compatible with fittings specified to that standard. The tolerance class A designation identifies the intended precision band for gauging operations, enabling straightforward go/no‑go assessments during incoming inspection or routine checks. The compact mass and simple geometry make it easy to handle and to fit into standard inspection workflows, reducing non‑productive time and supporting a predictable quality control routine. Suitability, limitations and procurement guidance This unit is offered from the Metav IndustryLine range as an Ausschuss item and therefore supplied as‑is. It is suitable for non‑critical checks, staff training and as a reference for comparative measurements, but it should not replace certified gauges in final inspection of critical assemblies. The lightweight construction (0.3 kg) eases handling and transport between workstations. For applications requiring full conformity or calibration certificates, please consult Metav Werkzeuge to identify a certified alternative or to discuss possible reconditioning options. Contact Metav Werkzeuge for a technical appraisal and procurement of this Metav IndustryLine G 7/8 hardened pipe thread ring gauge supplied as an Ausschuss item Technical data Article number: M315.407 GTIN: 4054469127255 Description: Pipe thread ring gauge, G 7/8, right‑hand Material: Gauge steel, hardened Standard: DIN ISO 228 Status: Ausschuss (non‑conforming) Weight: 0.3 kg Facts Pitch: 14 tpi Tolerance class: A Tariff number: 90173000 Special features Right‑hand thread form Whitworth thread designation noted Category: Gauges; Measuring pins Metav IndustryLine series FAQ What is this gauge intended for? This pipe thread ring gauge M315.407 is intended for verification of G 7/8 parallel pipe threads in workshop and inspection contexts, especially for non‑critical checks, training and process trials. Is the thread right‑hand or left‑hand? The ring gauge is a right‑hand thread with a 14 tpi pitch corresponding to the G‑series parallel pipe thread form. What does Ausschuss mean for this item? Ausschuss indicates the item is non‑conforming and supplied as‑is; M315.407 is therefore best used where full certification is not required or where the gauge serves as a spare or training tool. Which material and standard apply to the gauge? The gauge is made from hardened gauge steel and is designated against DIN ISO 228 with tolerance class A as its nominal specification. Can this gauge be used for final acceptance testing? Because M315.407 is supplied as an Ausschuss unit, it is not recommended for final acceptance of critical assemblies; request a certified gauge from Metav Werkzeuge for final inspection tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
G 7/8" Thread Gauge Go Whitworth Right-Hand, Hardened Gauge Steel, DIN ISO 228 - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction, DIN ISO 228 conformity and tolerance class A accuracy to ensure fast, reproducible thread acceptance in production and inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Pipe thread master ring gauge G 7/8 GO Whitworth (right‑hand) — Metav IndustryLine The Pipe Thread Master Ring Gauge G 7/8 GO Whitworth is a right‑hand Go gauge designed for verifying G 7/8 Whitworth pipe threads in line with DIN ISO 228 for reliable thread acceptance. Hardened gauge steel construction Conforms to DIN ISO 228 standard Tolerance class A for high accuracy Right‑hand G 7/8 Whitworth go gauge Faster assurance of thread conformity for production use A Go ring gauge performs a rapid functional check: it confirms whether a thread meets the minimum dimensional and form requirements. Built as a Go gauge to the G 7/8 Whitworth profile with 14 tpi, this ring provides a clear go/no‑go decision at the shop floor. Compliance with DIN ISO 228 and tolerance class A means inspectors gain reproducible acceptance criteria, which reduces rework and shortens throughput times. The technical specification translates directly into operational benefit: quicker checks, fewer rejects and consistent assembly fit. Durable build for long service life and low maintenance Constructed from hardened gauge steel, the ring is optimised for repeated engagement without rapid wear, preserving the measurement boundary that defines acceptance. Hardening increases wear resistance and supports stable dimensional behaviour under regular use, so calibration intervals can be planned rather than forced by premature degradation. The compact mass (approx. 0.35 kg) and right‑hand orientation make it straightforward to handle in routine inspection cycles, while the Go‑only function keeps operation simple and unambiguous for shop staff. Practical integration into quality workflows and traceability The ring is a purpose‑built inspection tool for process control in workshops and final assembly. As a standardised gauge it supports traceable acceptance checks and simplifies documentation of inspections. The compact design and clear specification (pitch 14 tpi, tolerance class A) allow easy inclusion into quality plans and control charts. Supplied under the Metav IndustryLine range, it benefits from Metav’s European logistics and product support, which helps maintain availability for recurring inspection needs and prevents production delays. For assured thread acceptance with lasting accuracy, choose the Metav IndustryLine G 7/8 Go ring gauge and contact Metav Werkzeuge in Emmerich for stock and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.327 GTIN: 4054469127132 Weight: 0.35 kg Size: G 7/8" Pitch: 14 tpi Tolerance class: A Standard: DIN ISO 228 Core numerical data Mass: 0.35 kg Pitch (steigung): 14 Tariff number: 90173000 Special features Hardened gauge steel Go ring gauge (functional acceptance) Right‑hand thread Whitworth thread form Conforms to DIN ISO 228 Tolerance class A SKU: M315.327 FAQ What does the Go designation mean for this ring gauge? The Go designation indicates that the ring gauge checks whether a thread meets the minimum acceptable form and size; the Pipe Thread Master Ring Gauge G 7/8 GO Whitworth (M315.327) permits threads that are within specification to pass. Is this gauge suitable for production line checks? Yes. The hardened construction and tolerance class A make the gauge suitable for frequent production checks and process control in workshop environments. Which thread form and pitch does the gauge verify? The gauge verifies the Whitworth pipe thread form for G 7/8 with a pitch of 14 tpi, ensuring compatibility with corresponding thread specifications. Does the ring comply with recognised standards? The ring is manufactured to DIN ISO 228 standards, providing a clear, documented basis for acceptance checks. How does the material affect longevity and maintenance? Made from hardened gauge steel, the ring offers enhanced wear resistance, which supports predictable calibration intervals and reduced maintenance effort. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M1 x 0.25 mm Go/No-Go Thread Plug Gauge 5H, Metric ISO Thread Right-Hand, Hardened Gauge Steel DIN 13 - Metav IndustryLine
Take advantage of rapid go/no-go verification for miniature metric threads by combining DIN 13 conformity with a hardened gauge steel construction and clear right-hand orientation; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit thread plug gauge M1 x 0.25 mm (5H) — right-hand (Metav IndustryLine) A Limit thread plug gauge M1 x 0.25 mm (5H) designed for swift verification of small metric ISO threads in precision production and quality control. Hardened gauge steel for long service life DIN 13 tolerance class 5H for ISO threads Designed for M1 x 0.25 mm metric threads Right-hand thread orientation Precision inspection for miniature threads The Limit thread plug gauge M1 x 0.25 mm (5H) delivers a straightforward, repeatable method for accepting or rejecting small threaded parts. As a dedicated plug gauge it provides fast, binary verification — a calibrated pass (go) or fail (no-go) — that removes ambiguity from inspection steps. For component runs and incoming goods checks, this approach reduces cycle time and supports consistent quality documentation while keeping process complexity low. Construction and standards that ensure repeatability Manufactured from hardened gauge steel, the gauge resists wear and maintains its measuring edges under routine workshop use. Compliance with DIN 13 and the 5H tolerance class means the gauge matches established ISO thread geometry for metric sizes, making results comparable across suppliers and plants. The right-hand orientation is clearly defined to match standard fastening conventions for small screws and threaded inserts; this reduces handling errors during inspection and helps sustain traceable quality control. Practical benefits in the inspection cycle A compact dimensional design and low mass make the gauge simple to handle and quick to use on the shop floor, shortening inspection times for small-batch production and prototype work. Using a dedicated go/no-go method prevents over-adjustment of machines and avoids unnecessary rework by providing an immediate conformity decision. For operations that process fine threads — watchmaking, miniature electronics housings or precision fasteners — this tool supports efficient throughput and reduces the risk of assembly failures from incorrect threads. Contact Metav Werkzeuge in Emmerich for supply and application support of the Metav IndustryLine M1 plug gauge — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and fast delivery from our European stock Technical data Article number: M315.001.0 GTIN: 4054469183039 Material: gauge steel, hardened Norm: DIN 13, 5H Thread: M1 x 0.25 mm, right-hand Weight: 0.02 kg Data Nominal size: M1 Pitch: 0.25 mm Tolerance class: 5H Mass: 0.02 kg Special features Go/no-go plug gauge design For metric ISO threads Right-hand orientation Hardened for wear resistance Category: gauges / thread inspection FAQ What is this gauge used for? The limit thread plug gauge M1 x 0.25 mm (5H) is used for quick go/no-go inspection of miniature metric ISO threads to verify conformity during production and incoming inspection. Which standard does the gauge follow? The gauge is manufactured to DIN 13 and the 5H tolerance class, ensuring compatibility with standard metric ISO thread geometries. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the M1 plug gauge offers good wear resistance for routine shop-floor inspections. How is the gauge applied in practice? The plug side checks internal thread fit: a correct-engagement on the go end and firm stop on the no-go end give immediate pass/fail results for threaded components; the SKU is M315.001.0 for ordering and identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M1.2x0.25 Thread Go/No-Go Plug Gauge Metric ISO Thread 5H Right-Hand Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standards‑compliant checking with a hardened gauge that fits fine‑thread production and inspection workflows; combine DIN 13 conformity, 5H tolerance class and robust gauge‑steel construction for dependable go/no‑go verification. Order the thread limit plug gauge directly via Metav Werkzeuge or consult our specialists if further clarification is required. Thread limit plug gauge M1.2 x 0.25, 5H — Metav IndustryLine A thread limit plug gauge M1.2 x 0.25, 5H designed for quick verification of metric ISO standard threads in small‑component manufacture and quality control. Precision M1.2 x 0.25 metric thread DIN 13, tolerance class 5H Hardened gauge steel construction Right‑hand ISO‑metric thread Fast, standards‑based pass/fail inspection for fine threads This limit plug gauge delivers a compact, unambiguous go/no‑go check for fine metric threads, using the M1.2 x 0.25 nominal size with 5H tolerance class according to DIN 13. The straightforward acceptance criterion reduces downstream rework: if the go end engages and the no‑go end does not, the thread is within tolerance. Such a simple decision rule accelerates inspection at the bench and supports consistent quality documentation, helping to maintain throughput in small‑part production without sacrificing traceability. Durable construction for reliable repeatability in production Manufactured from hardened gauge steel, the device sustains repeated use at the workstation while retaining dimensional integrity. Low mass (approx. 0.02 kg) and compact geometry make handling and alignment effortless, which reduces operator fatigue and the risk of measurement variation. The material choice and finishing support long service life and reproducible fits, so routine checks remain dependable and contribute to stable process capability on assembly lines and inspection benches. Designed for seamless integration into inspection workflows Traceability and traceable identification are straightforward: the item is listed under Metav IndustryLine with SKU M315.001.2 and GTIN 4054469183022 for procurement and inventory control. The gauge suits metrology benches, incoming inspection and in‑process checks for components with small ISO‑metric threads. Using a dedicated limit gauge simplifies SOPs and documentation and aligns with pragmatic quality systems in workshops and production facilities, offering a clear, verifiable test step for every batch. Contact Metav Werkzeuge today for supply and technical guidance on Metav IndustryLine gauges — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss availability and ordering from Emmerich. Technical Data Article number: M315.001.2 GTIN: 4054469183022 Material: hardened gauge steel Weight: 0.02 kg Thread size: M1.2 x 0.25 Standard: DIN 13 Tolerance class: 5H Handedness: right‑hand thread Facts Nominal diameter: M1.2 Thread pitch: 0.25 mm Weight: 0.02 kg SKU: M315.001.2 Special features Limit (go/no‑go) thread plug gauge Conforms to DIN 13 dimensional criteria Hardened, wear‑resistant material Category: Gauges / Inspection tools Brand: Metav IndustryLine FAQ What thread size does this gauge inspect? The thread limit plug gauge inspects M1.2 x 0.25 metric ISO threads; the go/no‑go criterion applies to the specified pitch and nominal diameter. Which standard and tolerance class apply to this gauge? This inspection gauge is manufactured to DIN 13 dimensional rules and uses the 5H tolerance class for the plug profile. What material is the gauge made from and how durable is it? The Metav IndustryLine limit gauge is made of hardened gauge steel, providing wear resistance and stable form under repeated use; weight is approximately 0.02 kg. How is the product identified for ordering and inventory? The item is listed as M315.001.2 (GTIN 4054469183022) under Metav IndustryLine for straightforward procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M1.4x0.3 Three-Point Limit Thread Plug Gauge 5H, Metric ISO Right-Hand, Hardened Gauge Steel DIN 13 - Metav IndustryLine
Benefit from reliable, repeatable verification of small ISO metric threads thanks to the combination of M1.4 x 0.3 sizing, DIN 13 / 5H tolerance and hardened gauge steel construction; this compact limit gauge supports fast Go/No‑Go inspection and reduces the risk of assembly faults. Order the limit thread plug gauge directly via Metav Werkzeuge or consult our advisors for integration advice. Limit thread plug gauge M1.4 x 0.3 — limit plug gauge, DIN 13 5H (Metav IndustryLine) A Limit thread plug gauge M1.4 x 0.3 designed for right‑hand ISO metric threads, intended for rapid go/no‑go verification in quality control and production inspection. DIN 13 tolerance class 5H For M1.4 x 0.3 ISO metric threads Hardened gauge steel construction Right‑hand thread Go/No‑Go verification Fast, repeatable checks for miniature threads The compact design delivers a straightforward method for confirming thread conformity on small components. By using a limit thread plug gauge the inspection task becomes a binary, reproducible operation: the Go/No‑Go principle identifies acceptable threads quickly, which accelerates throughput and reduces manual interpretation. Fabricated from hardened gauge steel, the item resists wear during repetitive use, preserving the gauge profile and ensuring stable precision over many inspection cycles. This makes it particularly suitable where short cycle times and reliable pass/fail decisions are required. What the specification guarantees in practice The specification DIN 13 with tolerance class 5H defines the dimensional limits for the mating internal thread and provides an industry‑recognised reference for interchangeability. The gauge checks both size and basic form without complex measurement equipment: a successful entry on the Go side confirms minimum material removal and a correct pitch form, while the No‑Go side detects oversize or malformed threads. The M1.4 x 0.3 designation identifies the nominal diameter and pitch, and the right‑hand configuration matches standard metric fasteners. Using this simple limit test supports consistent quality documentation and reduces reliance on subjective visual checks. Practical advantages for the workshop and quality lab Lightweight and compact, the gauge occupies minimal bench space and integrates easily into manual inspection stations or final assembly control points. With a mass of approximately 0.02 kg, handling is effortless and the small footprint aids storage and traceability. The construction in hardened gauge steel offers long service life; periodic surface inspection is sufficient to decide when rework or replacement is required. For traceable inventory, the item is listed under SKU M315.001.4, which simplifies procurement and stock management within established quality workflows. Contact Metav Werkzeuge to confirm suitability for specific thread series and to arrange supply—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.001.4 GTIN: 4054469183015 Material: hardened gauge steel Thread: M1.4 x 0.3 Tolerance: DIN 13, 5H Orientation: right‑hand Weight: 0.02 kg Facts SKU: M315.001.4 GTIN: 4054469183015 Weight: 0.02 kg Special features Limit plug gauge for Go/No‑Go inspection Hardened gauge steel construction Designed for ISO metric threads Category: Gauges FAQ What thread size does the gauge check? The limit thread plug gauge checks M1.4 x 0.3 right‑hand ISO metric threads in accordance with the specified tolerance class. How does the Go/No‑Go principle work with this gauge? A part that accepts the Go end and rejects the No‑Go end meets the dimensional limits; the gauge provides a clear pass/fail result without measurement interpretation. What material is used for the gauge? The gauge is made from hardened gauge steel, chosen for wear resistance and long‑term dimensional stability under repeated use. Is this gauge suitable for production quality control? Yes — the compact Go/No‑Go limit gauge is intended for rapid checks in production and final inspection of small threaded components. What are the SKU and GTIN for ordering and traceability? SKU: M315.001.4 GTIN: 4054469183015 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M1.6x0.35mm Go/No‑Go Thread Plug Gauge Right‑Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Combining hardened gauge steel construction with the DIN 13, 6H tolerance class, the thread plug gauge delivers reliable acceptance testing for small metric ISO threads. Order the thread plug gauge directly via Metav Werkzeuge or consult our specialists for application guidance and supply from Emmerich. M315.001.6 Thread plug gauge — M1.6 × 0.35 mm, 6H (Metav IndustryLine) The M315.001.6 is a right‑hand thread plug gauge for quick verification of M1.6 × 0.35 metric ISO regular threads in precision engineering and small‑part production Hardened gauge steel for wear resistance DIN 13 tolerance class 6H Designed for M1.6 × 0.35 metric ISO threads Compact, lightweight 0.02 kg body Consistent acceptance testing for small threads The compact plug provides a straightforward method to verify whether an internal thread meets the required acceptance limits. Machined to DIN 13 and produced to tolerance class 6H, the gauge offers a repeatable, objective pass/fail check for M1.6 × 0.35 internal threads. Constructed from hardened gauge steel, the component resists wear during frequent use, which sustains the inspection accuracy and reduces the need for frequent replacements — a practical advantage in small‑part manufacturing and incoming inspection routines. Practical handling that speeds up quality control Weighing only 0.02 kg and featuring a compact profile, the gauge is easy to manoeuvre at the bench or on the shop floor, enabling rapid checks without complex fixturing. The small size and low mass help to reduce operator fatigue during repeated inspections, while the clear specification to metric ISO regular threads simplifies operator training and documentation. For assembly and machining operations that depend on quick go/no‑go decisions, this tool offers a reliable, time‑saving measure that integrates directly into existing quality workflows. Durable design and simple integration into inspection plans Built from hardened gauge steel and specified for right‑hand metric threads, the gauge is suitable for routine use in workshop and production environments where durability and traceability matter. The straightforward design minimises maintenance: periodic visual inspection and storage in a clean environment protect the thread form and preserve measurement integrity. Metav’s distribution and quality‑filtering in Emmerich ensures product consistency and dependable supply, supporting repeatability across batches and helping to maintain production uptime. For assured thread inspection and procurement from a trusted European partner, contact Metav Werkzeuge for ordering or technical clarification — Metav Werkzeuge in Emmerich can advise on application specifics and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.001.6 GTIN: 4054469183008 Manufacturer: Metav IndustryLine Facts Thread size: M1.6 × 0.35 mm Weight: 0.02 kg Tolerance class: 6H Special features Material: Gauge steel, hardened Standard: DIN 13 Thread direction: Right‑hand FAQ What is this gauge used for? The gauge is intended for acceptance testing of internal metric ISO regular threads; the M315.001.6 verifies whether an M1.6 × 0.35 thread conforms to the specified limits What does tolerance class 6H indicate? Tolerance class 6H defines the internal thread tolerance zone according to DIN/ISO rules; the class used on the M315.001.6 sets the acceptable size range for standard metric threads What material and durability can be expected? Made from hardened gauge steel, the plug gauge resists wear under normal workshop use and maintains a stable thread form for extended inspection cycles Is the gauge suitable for production use on small components? Yes; the compact, lightweight construction and clear DIN 13 specification make it suitable for fast, repeatable go/no‑go checks in small‑part production environments Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M1.8x0.35mm Limit Thread Plug Gauge, 6H Metric ISO Right-Hand, Hardened Gauge Steel DIN 13 - Metav IndustryLine
Product data contain contradictory quality indicators (the item is marked both as accepted and as rejected); a reliable product description cannot be generated until the source data are verified. This inconsistency in the quality indicators makes it impossible to determine the true status of the product, which is essential for creating an accurate and trustworthy description. Please ensure that the input data are thoroughly reviewed and corrected to eliminate any discrepancies. Once the data have been verified and corrected, you may proceed to submit them again for processing. Accurate input data are crucial for generating reliable product descriptions.
M10 x 0.75 mm Thread Go Ring Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Combine DIN 13 conformity, hardened gauge steel construction and the precise M10 x 0.75 thread form for dependable go/no-go checks; secure consistent thread inspection through Metav Werkzeuge or consult their specialists for application advice. Thread Ring Gauge M10 x 0.75 (Go) — Hardened gauge steel, DIN 13 (Metav IndustryLine) A Thread Ring Gauge M10 x 0.75 designed for quick verification of metric ISO fine threads (right-hand), suited to workshop inspection and routine quality control. M10 x 0.75 metric ISO fine thread DIN 13 tolerance, class 6g Hardened gauge steel construction Go ring gauge for pass/fail checking Consistent acceptance testing without interpretation A precise Go ring gauge provides an objective pass/fail decision for threaded parts, removing ambiguity from visual checks. Built to the DIN 13 specification and the 6g tolerance band, this gauge is tailored for M10 x 0.75 metric ISO fine threads and is therefore directly compatible with standard engineering practices. Using a dedicated ring gauge streamlines inspection routines, reduces cycle time at the measuring station and avoids time-consuming rework caused by subjective assessments. Durable build for long-term measurement stability Manufactured from hardened gauge steel, the ring maintains its reference profile even under frequent handling on the shop floor. The robust material choice ensures resistance to wear and preserves measurement integrity over many cycles, which lowers replacement frequency and supports uninterrupted production. The compact, low-mass design contributes to easy handling while the stable geometry sustains repeatable checks over time. Integrates with existing quality workflows Right-hand metric thread verification is simplified by a purpose-made ring gauge that fits seamlessly into standard inspection jigs and handheld checks. The gauge supports reliable go/no-go routines and complements existing control plans and documentation practices. For organisations seeking to professionalise routine thread checks, the gauge serves as a rational investment in traceable quality assurance and efficient throughput. Specify the Metav IndustryLine M10 Go ring gauge to secure consistent thread inspection; contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data Article number: M315.110.3 GTIN: 4054469123943 Description: Thread ring gauge M10 x 0.75, Go, right-hand Facts Nominal size: M10 x 0.75 mm Tolerance class: 6g Weight: 0.05 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13 Thread type: Metric ISO fine thread, right-hand Gauge type: Go ring gauge Brand: Metav IndustryLine FAQ What does "Go" mean for this gauge? A Go ring gauge confirms that an external thread falls within the permissible maximum material limit; the supplied ring gauge is the Go condition for the thread ring gauge M10 x 0.75 by Metav IndustryLine (SKU M315.110.3) Which threads can be checked with this gauge? The tool is intended for metric ISO fine threads M10 x 0.75, right-hand, manufactured to the DIN 13 tolerance band with class 6g fit How does hardened gauge steel benefit workshop use? Hardened gauge steel provides wear resistance and long-term dimensional stability, ensuring the Metav IndustryLine ring gauge retains its reference profile during repeated checks Is this gauge suitable for inline quality control? Yes; the compact and stable design supports rapid go/no-go inspection cycles and integration into standard quality control workflows Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x1.5 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Reliable acceptance checks and long-term repeatability are achieved through the combination of hardened gauge steel, DIN 13, 6H conformity and a supplied calibration certificate, ensuring traceable results in production and inspection. Order the Go thread plug gauge M100 x 1.5 directly via Metav Werkzeuge or ask our consultants if needed. Go thread plug gauge M100 x 1.5 — hardened gauge steel, DIN 13, 6H Go thread plug gauge M100 x 1.5 for quick verification of metric ISO fine internal threads in a right‑hand form, designed for workshop and laboratory inspection Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, 6H Right‑hand metric ISO fine thread Accurate acceptance checks that reduce rework A dedicated Go gauge such as this M100 x 1.5 plug permits immediate pass/fail assessment of internal threads, turning subjective judgments into objective results. The instrument is manufactured to DIN 13, 6H, which defines the thread form and tolerance band for metric fine threads; compliance with this standard ensures that acceptance criteria align with engineering drawings and inspection plans. By using a calibrated plug gauge a production line gains a repeatable, fast check that prevents out‑of‑tolerance parts entering assembly, lowering scrap and rework rates while stabilising process capability. Robust construction for consistent performance Constructed from hardened gauge steel, the mandrel is dimensionally stable and wear‑resistant under repeated use. The material choice and heat treatment deliver a measured balance between surface hardness and toughness, so the gauge retains its calibrated form longer than softer checking tools. This durability translates into fewer replacements and more reliable batch‑to‑batch comparability. The compact mass and precise machining also support consistent tactile feedback during inspection, aiding rapid operator decisions while preserving measurement integrity. Traceable calibration for quality assurance The tool is supplied with a calibration certificate, confirming that the gauge was checked against traceable standards prior to dispatch. This document provides assurance for internal quality records and supports audits by demonstrating the instrument’s conformity at the time of delivery. Traceability helps link inspection results back to a known reference, which is essential for regulated manufacturing and formal quality systems. For workplaces requiring documented verification of measuring tools, the included certificate simplifies compliance and reduces administrative effort. Practical use in production and inspection routines Designed as a Go plug gauge for a right‑hand metric ISO fine thread, the item integrates seamlessly into routine in‑process checks and final inspection stations. Its simple go/no‑go principle accelerates throughput on the shop floor and complements dimensional gauges and thread measuring microscopes in a metrology set. As a standardised inspection artefact, it is ideally suited to machine shops, toolrooms and quality control laboratories where fast, unambiguous verification is needed. The compact form makes handling straightforward and storage uncomplicated between shifts. For traceable, standard‑compliant thread inspection and reliable long‑term performance, contact Metav Werkzeuge to reserve the Go thread plug gauge M100 x 1.5 and to discuss calibration documentation and delivery options. Technical Data Article number: M315.500.6 GTIN: 4054469153179 ECLASS: 21170228 Facts Thread size: M100 x 1.5 Weight: 0.2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6H Type: Go thread plug gauge (GUT) Thread direction: right‑hand Supplied with calibration certificate FAQ What does "Go" mean for this plug gauge? A Go plug gauge indicates acceptance: the Go size must enter the internal thread without interference. The Go thread plug gauge M100 x 1.5 confirms that the internal metric ISO fine thread falls within the lower tolerance limit for acceptance. Is a calibration certificate included with the gauge? Yes. The tool is supplied with a calibration certificate that documents its inspection against traceable standards at the time of dispatch. Which thread standard does this gauge comply with? The gauge is manufactured to DIN 13, 6H, the German standard that defines metric ISO thread geometry and tolerance positions relevant for fine threads. Can this gauge be used on left‑hand threads? No. This item is a right‑hand Go plug gauge for M100 x 1.5 threads; left‑hand threads require a specifically made left‑hand gauge. Is the material suitable for heavy shop use? The hardened gauge steel construction is selected for wear resistance and dimensional stability, making the gauge suitable for frequent inspection tasks in standard workshop and laboratory environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x1.5 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, conformity to DIN 13 with 6H tolerance and an included calibration certificate to secure reliable reject detection in serial production. Order the thread plug directly via Metav Werkzeuge or consult the Metav team for specification advice and fast supply. Thread plug gauge NO‑GO M100 x 1.5 — No‑go plug for metric ISO fine threads (right‑hand) The Thread plug gauge NO‑GO M100 x 1.5 is a hardened gauge designed for precise verification of right‑hand metric ISO fine threads in production and incoming inspection, ensuring defective threads are reliably identified before assembly. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Delivered with calibration certificate For M100 x 1.5 metric ISO fine thread Prevent faulty assemblies with dependable reject control A dedicated No‑Go plug is the most direct way to prevent threaded components with out‑of‑tolerance form or pitch from entering assembly. Manufactured from hardened gauge steel, the plug resists wear and preserves the gauge form over long inspection runs, so measurement results remain stable. Conformity to DIN 13 and the 6H tolerance class provides a clear, standards‑based pass/fail criterion that integrates smoothly into quality control plans and reduces rework by catching faults early. Durable design that supports continuous use on the shop floor The geometry and material choice of this inspection plug are optimised for repeated handling in production environments. The hardened steel body delivers high abrasion resistance and dimensional stability, which translates into fewer replacements and lower process interruptions. The compact, single‑purpose format simplifies insertion and visual handling during inspection cycles, improving throughput without adding complexity to operator routines. Traceable calibration for quality assurance and audits A formal calibration certificate accompanies the plug, offering documented evidence of conformity and enabling traceability in quality records. This certificate supports routine audits and supplier control procedures and helps maintain alignment with internal inspection intervals. The combination of a standardised tolerance class and documented calibration reduces uncertainty in acceptance decisions and strengthens supplier qualification processes. For consistent thread inspection with documented traceability, request the Metav IndustryLine NO‑GO thread plug via Metav Werkzeuge; technical advisers at Metav Werkzeuge can confirm suitability for specific applications and arrange prompt delivery — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.600.6 GTIN: 4054469152240 Tariff code: 90173000 Weight: 1.8 kg Facts Thread size: M100 x 1.5 Tolerance class: 6H Standard: DIN 13 Hand: Right‑hand Special features Material: Gauge steel, hardened Function: No‑go (reject) thread plug Supply: Calibration certificate included Category: Gauges / Inspection tools FAQ What is the primary purpose of this plug? The plug serves as a No‑Go inspection gauge to identify metric ISO fine threads (M100 x 1.5) that exceed allowable form or pitch deviations before assembly. Does the gauge include traceable calibration documentation? Yes, the plug is supplied with a calibration certificate, providing traceable evidence of its inspection status and supporting quality records. Which standard and tolerance does this plug follow? This inspection plug is manufactured to DIN 13 and corresponds to the 6H tolerance class for metric threads. Is this plug suitable for production‑line inspections? The hardened construction and simple Go/No‑Go format make the plug suitable for repeated use in production and incoming goods inspection to prevent unfit threads from proceeding to assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x1.5 Thread Ring Gauge Go Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, hardened construction and a supplied calibration certificate to ensure reliable thread inspection on metric ISO fine threads; order or request advice via Metav Werkzeuge for seamless integration into production control. Thread ring gauge GUT M100×1.5 — right‑hand metric ISO fine‑thread inspection gauge (hardened) The Thread ring gauge GUT M100×1.5 is a right‑hand limit gauge for inspection of metric ISO fine threads, designed for production and quality assurance in machine shops and inspection labs. Hardened gauge steel construction Delivered with calibration certificate DIN 13, tolerance class 6g Right‑hand metric fine thread M100×1.5 Designed for fast, repeatable thread verification on shop floor The ring is manufactured from hardened gauge steel, giving a robust contact surface that resists wear and preserves dimensional fidelity over repeated inspections. The M100×1.5 size matches metric ISO fine threads, ensuring compatibility with common engineering components and fasteners. With the DIN 13, 6g tolerance incorporated in the design, the gauge provides a clear pass/fail reference that reduces decision time at the inspection station and helps to lower scrap rates by identifying non‑conforming threads early in the process. Traceable calibration for quality systems and audits Supplied with a calibration certificate, the gauge delivers documented traceability suitable for routine quality control and internal audits. The certificate accompanies the instrument, confirming the measured values at the time of delivery and enabling straightforward incorporation into quality records. This traceability supports compliance activities and provides confidence during supplier assessments or customer audits, making the instrument a practical choice for manufacturers who need verifiable measurement evidence. Practical handling and workshop resilience The construction emphasises durability and ease of use in production environments: the hardened gauge steel body withstands workshop handling while the ring geometry simplifies alignment with threaded parts. The gauge’s right‑hand orientation and clear size marking aid rapid identification during busy inspection routines. Compact and robust, the tool is intended for repeatable use in machining centres, assembly lines and inspection benches where consistent thread checks contribute to process reliability and product quality. Secure traceable thread inspection with Metav IndustryLine's calibrated ring gauge — contact Metav Werkzeuge for technical advice and reliable supply from Emmerich. Technical data Article number: M315.700.6 GTIN: 4054469152486 Label: Gewinde‑Lehrring GUT M100 X 1,5, right Facts Size: M100×1.5 Weight: 1.8 kg Tariff number: 90173000 Standard: DIN 13, 6g Special features Material: gauge steel, hardened Delivery: calibration certificate included Orientation: right‑hand thread Manufacturer: Metav IndustryLine FAQ What thread size and type does this gauge check? The gauge checks an M100×1.5 right‑hand metric ISO fine thread; it is supplied as the Metav IndustryLine ring gauge with the article number M315.700.6. Is the gauge calibrated on delivery? Yes, the instrument is delivered with a calibration certificate, providing documented measurement traceability at the time of supply. Which tolerance or standard does the gauge conform to? The gauge is manufactured to DIN 13 and complies with tolerance class 6g, suitable for fine‑thread quality control. What is the gauge made from and how durable is it? Constructed from hardened gauge steel, the ring offers abrasion resistance and long‑term dimensional stability for regular inspection tasks. Where is this gauge typically used? The ring is intended for production and inspection environments such as machine shops, assembly lines and quality departments where fast, repeatable thread verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x1.5 Thread Ring Gauge, Go/No-Go Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and DIN‑13, tolerance class 6g to secure repeatable thread inspection; delivered calibrated with a traceable calibration certificate for reliable quality control. Order directly via Metav Werkzeuge or consult our specialists for application advice. No-go thread ring gauge M100 x 1.5 — right-hand, DIN 13 (6g) — Metav IndustryLine The No-go thread ring gauge M100 x 1.5 is a right-hand metric ISO fine-thread inspection ring intended for pass/fail quality control in production and incoming inspection. Hardened gauge steel construction DIN 13 thread form, tolerance class 6g Supplied calibrated with certificate Right-hand no-go ring for M100 x 1.5 Precision where it prevents errors The ring is manufactured from hardened gauge steel, giving dimensional stability and wear resistance that preserve the inspection limit over many cycles. Specified to DIN 13 and tolerance class 6g, the gauge provides a firm, objective criterion for thread acceptance: a correct part will pass the go check, whereas engagement with this no-go ring signals non-conformity. Delivered calibrated with a calibration certificate, traceability is established from the first inspection — a decisive benefit for manufacturers who must document conformity and reduce the risk of escapes. Robust design for consistent pass/fail inspection Built for routine use on the shop floor, the ring’s hardened material and precise thread form ensure reproducible checks with minimal maintenance. The no-go function is straightforward in practice: if the ring screws onto the part it indicates an oversize or incorrect thread form and the component is rejected, which speeds decision-making and reduces downstream rework. With a measured mass of 1.8 kg the gauge is solid in hand and designed to resist accidental distortion during handling, preserving measurement integrity across repeated checks. Seamless fit into industrial quality workflows Integration into existing inspection stations is uncomplicated thanks to the standard M100 x 1.5 sizing and compliance with established DIN standards, which supports interoperability across equipment and fixtures. Traceability is supported through the included calibration documentation, simplifying audit preparation and record keeping. Whether used at a receiving dock, in-line inspection point or final control, the ring serves as an efficient, cost-effective barrier against non-conforming threads while keeping throughput high and inspection steps clear. For assured thread control with Metav IndustryLine’s hardened no-go ring, contact Metav Werkzeuge in Emmerich for expert advice and calibration documentation: +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.800.6 GTIN: 4054469152721 Weight: 1.8 kg Material: hardened gauge steel Size: M100 x 1.5 Type: No-go thread ring gauge Supplied with calibration certificate Facts Diameter: M100 Thread pitch: 1.5 mm Tolerance class: 6g Norm: DIN 13 Tariff number: 90173000 eClass: 21170214 Special features Right-hand thread orientation Complies with DIN 13 thread form Hardened gauge-steel construction Calibrated; includes calibration certificate for traceability Intended for pass/fail production inspection FAQ What does the no-go ring indicate during inspection? The no-go ring indicates that a thread exceeds the permissible size or has an incorrect form; engagement with the ring marks the part as non-conforming for the No-go thread ring gauge M100 x 1.5. Is the gauge supplied with calibration documentation? Yes, the gauge is supplied calibrated and includes a calibration certificate to support traceability and quality records for the Metav IndustryLine ring. Which standard does this thread gauge follow? The ring follows DIN 13 with tolerance class 6g, providing compatibility with metric ISO fine-thread specifications used in production control. Can this ring be used for left-hand threads? No, this tool is manufactured as a right-hand thread ring; left-hand threads require the corresponding left-hand gauge. What material is the ring made from and why does that matter? The ring is made from hardened gauge steel, which ensures wear resistance and dimensional stability to maintain inspection accuracy over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x2 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of the hardened gauge‑steel construction and factory calibration to secure reliable thread inspection in production; the DIN 13 (6g) tolerance and right‑hand M100 x 2.0 pitch provide unambiguous go/no‑go decision making. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M100 x 2.0 (No‑Go) — hardened gauge steel, DIN 13 (6g) A Thread ring gauge M100 x 2.0 (No‑Go) intended for pass/fail inspection of metric ISO fine threads (right‑hand), designed for workshop and production quality control Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13, tolerance 6g Right‑hand metric fine pitch M100 x 2.0 Precise, standards‑based inspection for repeatable results The core advantage lies in standardised, repeatable measurement: the hardened gauge steel body and the DIN 13 (6g) tolerance class make this a reliable instrument for thread assessment. As a no‑go inspection ring, it provides a clear fail criterion for oversize or out‑of‑tolerance threads, reducing subjective judgements on the shop floor. The supplied calibration certificate documents traceability and confirms the gauge was checked under controlled conditions — an important asset for internal quality procedures and audit trails. Robust engineering for daily shop‑floor use Constructed from hardened gauge steel, the ring resists wear and maintains form over repetitive checks, which preserves measurement integrity and limits the need for frequent replacement. The compact, solid design and a weight of approximately 1.8 kg ensure the ring is stable in handling yet portable between inspection stations. Robustness translates directly into lower process downtime: fewer instrument failures mean a steadier production flow and faster decision cycles during assembly or incoming inspection. Integration into inspection workflows and traceability The ring is intended for decisive go/no‑go verification rather than dimensional measurement, enabling rapid sorting of components during in‑process and final checks. Marking the instrument with clear identification (SKU and GTIN) and keeping the calibration certificate alongside batch records supports traceability and non‑conformity documentation. Using a dedicated no‑go ring for M100 x 2.0 pitch threads removes ambiguity from pass/fail calls and simplifies operator training for routine inspections. Practical handling, storage and application advice As a right‑hand metric fine‑pitch gauge, the ring is suited to checking mating threads produced to metric ISO fine standards. Handle the gauge with care: avoid forcing the ring onto threads and store it protected from contaminants and impact to maintain accuracy. When used as intended, the inspection ring speeds up quality gates and helps prevent assemblies with incorrect threads from entering later production stages — a small change that avoids costly rework and scrap. Contact Metav Werkzeuge today to request the calibrated M100 x 2.0 no‑go thread ring gauge and benefit from reliable, standards‑based thread inspection supplied from Emmerich. Technical Data Article number: M315.800.7 GTIN: 4054469153766 Weight: 1.8 kg Material: Gauge steel, hardened Designation: No‑Go thread ring gauge Thread size: M100 x 2.0 Thread direction: Right‑hand Standard: DIN 13, 6g Calibration: Calibration certificate included Facts Tolerance class: 6g Applicable standard: DIN 13 Mass/size designation: M100 x 2.0 Weight (approx.): 1.8 kg GTIN present: yes Special features Intended use: Go/No‑Go inspection of metric ISO fine threads Construction: Hardened gauge steel for wear resistance Traceability: Supplied with calibration certificate Application area: Workshop and production quality control Category: Thread gauges / inspection rings FAQ What is the intended use of this thread ring gauge? The thread ring gauge M100 x 2.0 (No‑Go) is intended for go/no‑go inspection of metric ISO fine threads to quickly identify oversize or out‑of‑tolerance threads. Does the gauge come with calibration documentation? Yes, the gauge is supplied with a calibration certificate confirming the inspection results and traceability. Which tolerance and standard does the ring conform to? The ring conforms to DIN 13 with tolerance class 6g, matching common specifications for metric ISO fine threads. Can this gauge be used for left‑hand threads? This specific item is manufactured for right‑hand threads; left‑hand thread checks require a correspondingly made ring. How should the ring be stored to preserve accuracy? Store the ring clean and protected from shocks and corrosive environments; keep the calibration certificate with the instrument to maintain traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x2 Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict DIN 13, 6H conformity to secure thread quality and reduce rework; supplied with a calibration certificate for traceable inspection. Order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. Thread plug gauge NO‑GO M100 x 2.0 — Right‑hand, hardened gauge steel, Metav IndustryLine The Thread plug gauge NO‑GO M100 x 2.0 is a precision inspection gauge for right‑hand metric ISO fine threads, designed for rapid go/no‑go checks in production and quality control. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Right‑hand M100 x 2.0 no‑go gauge Consistent rejection criteria to protect assembly integrity The no‑go plug gauge provides an unequivocal mechanical limit that prevents oversized or improperly formed internal threads from passing inspection. By using a NO‑GO master in production control, inspection routines gain repeatability and clear accept/reject outcomes, reducing subjective judgement. The specified M100 x 2.0 geometry combined with the DIN 13, 6H tolerance ensures compatibility with standard metric fine‑threaded components and supports reliable assembly fit across batches. Traceability and process assurance with a calibration certificate The gauge is delivered with a calibration certificate, which documents the inspection status at delivery and enables traceable quality records. This certificate supports internal quality systems and audit requirements: measurement results can be referenced to the supplied inspection document rather than relying on ad hoc verification. The hardened gauge steel construction maintains form stability in regular use, so calibration intervals lengthen and the total cost of ownership improves — a concrete efficiency gain for shopfloor quality control. Robust construction for workshop handling and repeatable checks Manufactured from hardened gauge steel, the inspection plug is engineered for frequent use in inspection benches and assembly stations; the material choice minimises wear and preserves the functional limit. The right‑hand configuration and metric fine pitch suit production environments dealing with ISO fine threads. The compact, single‑function design makes it suitable for quick checks during incoming inspection and final release, helping to prevent costly rework and ensuring components meet specification before integration. For secure thread inspection with Metav IndustryLine’s calibrated NO‑GO plug gauge, contact Metav Werkzeuge for tailored technical advice and reliable supply from Emmerich. Technical data Article number: M315.600.7 GTIN: 4061905047824 Label: Thread plug gauge NO‑GO M100 x 2.0 for metric ISO fine thread, right Weight: 1.8 kg Material: Hardened gauge steel Facts Thread size: M100 x 2.0 Standard: DIN 13, tolerance 6H Tariff number: 90173000 Special features No‑go plug gauge (ausschuss) Right‑hand thread form Supplied with calibration certificate FAQ What is the intended use of this gauge? The NO‑GO plug gauge is intended for quick go/no‑go inspection of internal M100 x 2.0 metric ISO fine threads to verify whether a thread is within acceptable limits for assembly. Is the gauge traceably calibrated on delivery? Yes, the gauge is supplied with a calibration certificate, providing traceable documentation of the inspection status at the time of delivery. Which standard does the gauge conform to? The gauge is manufactured to DIN 13 with a tolerance class of 6H, matching common metric ISO fine‑thread production and inspection practices. What material is the gauge made from and why does it matter? The plug is made from hardened gauge steel, which reduces wear during repetitive checks and maintains the functional limit geometry for longer calibration intervals. Can this gauge be used for left‑hand threads? This particular item is produced in a right‑hand configuration; left‑hand versions must be specified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x2 Thread Go Gauge Metric ISO Fine Thread Right, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise thread inspection with a hardened go ring that combines material robustness, DIN‑class tolerance and traceable calibration for reliable production acceptance. Order the gauge via Metav Werkzeuge or request a technical consultation from our specialists. Thread ring gauge GUT M100 × 2.0 — Go gauge for metric ISO fine thread, right-hand, DIN 13 6g A Thread ring gauge GUT M100 × 2.0 designed as a go ring for rapid, repeatable checks of M100×2.0 metric ISO fine threads in production, inspection and incoming‑goods control Go ring gauge M100 × 2.0, right-hand Hardened gauge steel construction Tolerance class 6g according to DIN 13 Supplied with calibration certificate Durable construction for consistent inspection results The ring is manufactured from hardened gauge steel, providing wear resistance and dimensional stability under repeated use. The robust material and the design of the checking surface reduce surface deformation and thermal influence during short inspections, which leads to consistent acceptance checks and longer service life compared with untreated gauges. This durability supports predictable quality routines and lowers the frequency of replacement. Conformance, traceability and audit readiness Certified to DIN 13 with tolerance 6g, the gauge meets standard requirements for metric ISO fine threads and provides clear acceptance criteria for go/no‑go testing. Delivered with a calibration certificate, the tool ensures traceability of measurement results for internal quality records and external audits. The traceable documentation simplifies conformity evidence during supplier qualification and incoming‑goods inspections. Faster shop‑floor control and reduced throughput risk As a dedicated go ring, the gauge enables immediate accept/reject decisions without measuring equipment setup, accelerating routine checks and minimising machine downtime. The straightforward pass/no‑pass method increases inspection throughput and reduces human interpretation errors, contributing to a measurable uplift in process efficiency and fewer downstream nonconformances. Typical applications and handling guidance Intended for production monitoring and incoming‑goods inspection of metric ISO fine threads, the gauge is optimised for right‑hand M100 × 2.0 threads commonly found in heavy‑duty fastenings and precision assemblies. For reliable checks, the ring should engage the threaded part in a straight axial direction; any resistance beyond the expected go fit indicates conformity issues requiring further investigation. Regular re‑calibration and clean storage maintain performance over the long term. Choose Metav IndustryLine's calibrated go ring for dependable thread control — contact Metav Werkzeuge for availability and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: M315.700.7 GTIN: 4054469153551 Tariff code: 90173000 Weight: 1.8 kg Material: Hardened gauge steel Standard: DIN 13 Core data Thread size: M100 Pitch: 2.0 mm Tolerance class: 6g Special features Go gauge (GUT) for inspection Right‑hand metric ISO fine thread Supplied with calibration certificate FAQ What tolerance class and standard does this ring gauge follow? The ring gauge conforms to DIN 13 and is manufactured to tolerance class 6g for metric ISO fine threads, providing a recognised acceptance criterion for production and inspection. Is the gauge supplied with traceable documentation? Yes, the gauge is supplied with a calibration certificate, ensuring traceability of inspection results and suitability for quality records and audits. What material is used and why is it important? Made from hardened gauge steel, the ring offers wear resistance and dimensional stability, which preserves the checking surface and ensures consistent pass/no‑pass results over time. How is the go ring used for quick checks on shop floor? The go ring is pushed onto or screwed onto the threaded part in line; a free fit indicates conformity, while any jamming or failure to enter signals a nonconforming thread that requires further inspection or rework. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x2 Thread Plug Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, strict DIN 13, 6H conformity and delivery with a calibration certificate to guarantee reliable thread acceptance checks. Order the calibrated thread plug gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge GUT M100 x 2.0 — Metric ISO fine thread acceptance gauge (Metav IndustryLine) A calibrated thread plug gauge GUT M100 x 2.0 for right-hand metric ISO fine threads, intended for production inspection and incoming goods control Calibrated with certificate included Hardened gauge steel construction DIN 13 tolerance class 6H For M100 x 2.0 metric fine thread, right-hand Certified precision for reproducible acceptance checks The calibrated go gauge offers a direct, reliable method to verify internal threads against the DIN 13 specification and tolerance class 6H, reducing uncertainty during inspection. The presence of a calibration certificate documents traceability and measurement conformity, which supports quality records and audit trails. Using a dedicated plug gauge simplifies go/no-go decisions on the shop floor, speeding up routine checks and helping to avoid rework or scrap by catching non-conforming threads early. Robust design tailored to repetitive workshop use Constructed from hardened gauge steel, the gauge resists wear under frequent engagement with threaded components, maintaining dimensional integrity over many inspection cycles. The right-hand M100 x 2.0 geometry is optimised for standardised fine-thread checks in heavy‑duty applications; the solid construction and balanced mass ensure steady handling and repeatable seating into the thread. This durability translates into longer intervals between recalibration and lower lifetime cost of ownership for the inspection tool. Practical procurement and process benefits for quality workflows The gauge streamlines inspection routines by providing an unequivocal acceptance criterion: the go condition. Clear identification (SKU and GTIN) and tariff classification support fast procurement and customs handling, while supply from an established precision partner reduces sourcing risk. Relying on a calibrated, standardised gauge helps harmonise quality routines across multiple production lines and supports consistent product release decisions without the need for complex measurement setups. Contact Metav Werkzeuge today to obtain the calibrated Metav IndustryLine thread plug gauge and secure traceable, shop-floor-ready thread inspection for your production line Technical data Article number: M315.500.7 GTIN: 4054469152967 Designation: Thread plug gauge GUT M100 x 2.0, right-hand Weight: 1.8 kg Material: Gauge steel, hardened Standard: DIN 13, 6H Facts Thread diameter: 100 mm Thread pitch: 2.0 mm Tariff number: 90173000 Mass (designation): M100x2 Special features Calibrated; calibration certificate included Go gauge ("GUT") for acceptance testing Right-hand thread Hardened gauge-steel construction FAQ What is this gauge used for? The thread plug gauge is used for acceptance testing of internal metric ISO fine threads; the GUT M100 x 2.0 plug confirms go condition for right-hand threads. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate, ensuring documented traceability for inspection records. Which standard and tolerance does the gauge follow? The gauge complies with DIN 13, tolerance class 6H, suitable for standardised fine-thread verification. Is this a go or no-go gauge? The designation "GUT" indicates a go gauge; it verifies that the internal thread meets the required dimensions for acceptance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x3 Thread Gauge Ring Metric ISO Fine Right-Handed With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13, 6g conformity and an included calibration certificate for reliable go/no-go inspection of metric fine threads; order the M315.800.8 no-go ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Gewinde‑Lehrring AUSSCHUSS M 100 x 3.0 – No‑go thread ring gauge, hardened gauge steel (Metav IndustryLine) The Gewinde‑Lehrring AUSSCHUSS M 100 x 3.0 is a no‑go ring gauge intended for acceptance testing of metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction DIN 13, 6g tolerance class Calibration certificate included Designed as a no‑go (reject) ring gauge Ensure fast, objective go/no‑go decisions at the inspection bench The no‑go ring gauge offers a straightforward, repeatable control method for metric fine threads. Applied as a go/no‑go system, the ring provides an immediate pass/fail result that supports efficient process control and reduces downstream rework. The M100 x 3.0 size covers common fine‑thread applications for machine assemblies and fittings; the instrument’s simple mechanical function removes ambiguity from routine checks and speeds up quality gates on the production line. Robust materials and geometry for long service life Manufactured from hardened gauge steel, the ring resists wear and maintains dimensional stability under frequent use. The hardened material and careful finishing extend the life of the gauge and preserve accuracy between calibrations, which is particularly valuable where throughput is high and inspection throughput must be sustained. The solid construction and balanced mass make handling predictable during repeated thread engagement, minimising user variability and ensuring reproducible checking. Traceable calibration and standard conformity for audit readiness Delivered with a calibration certificate, this no‑go gauge supports traceability of inspection results and simplifies audit documentation. Conformance to DIN 13, 6g defines the tolerance band for the mating external thread and ensures compatibility with established metric ISO fine‑thread standards. In practice, the reject ring must not fully engage the tested thread; if the ring screws onto the part, the thread fails dimensional acceptance. This clear criterion helps maintain product quality and reduces the risk of field failures. For purchasing and specification assistance for the Metav IndustryLine M100 x 3.0 no‑go thread ring gauge, contact Metav Werkzeuge in Emmerich for direct procurement and expert guidance Technical data SKU: M315.800.8 GTIN: 4054469154541 ECLASS: 21170214 Tariff number: 90173000 Numbers / core technical data Thread size: M100 x 3.0 Weight: 1.8 kg Norm: DIN 13, 6g Designs / special features Material: gauge steel, hardened Type: no‑go (reject) ring gauge Calibration: calibration certificate included Category: ring gauge / gauge (Lehren) FAQ What is the primary function of this no‑go ring gauge? The no‑go ring gauge is used to perform quick pass/fail inspections of external metric fine threads; if the Gewinde‑Lehrring AUSSCHUSS M 100 x 3.0 screws onto a part it indicates the thread is out of tolerance and should be rejected. Does the gauge come calibrated? Yes, the ring is supplied with a calibration certificate, which documents traceability and is suitable for inclusion in inspection records when using the M315.800.8. Which tolerance class does this ring verify? The gauge is manufactured to verify threads against DIN 13, 6g, the standard tolerance class used for many metric ISO fine‑threaded external parts. Is the gauge suitable for high‑volume production checks? The hardened gauge steel construction and straightforward go/no‑go functionality make this ring suitable for frequent use in high‑throughput inspection tasks, preserving measurement consistency across many parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x3 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN‑conforming geometry for repeatable thread verification; the tool is supplied calibrated with a certificate and is suitable for in‑process and final inspection. Order the plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M100 x 3.0 (right-hand) — DIN 13, 6H by Metav IndustryLine A Thread plug gauge GUT M100 x 3.0 designed for fast, reliable verification of metric ISO fine internal threads in production and quality inspection environments Calibrated with certificate Hardened gauge steel construction Metric ISO fine thread M100 x 3.0 Right-hand gauge (GUT) Precision verification with industrial conformity The plug gauge serves as a compact, robust reference for thread acceptance during serial production and incoming inspection. Produced to DIN 13, 6H, the master enables quick go/no‑go checks and reduces decision time on whether threaded components meet specification. The hardened gauge steel body resists wear under repeated use, keeping the acceptance limit stable and lowering the need for frequent requalification. Practical benefits for shopfloor and inspection benches Using a dedicated plug gauge simplifies routine checks: the GUT (go) end confirms the minimum material condition while the clearly defined geometry avoids ambiguous results. Because the gauge is supplied calibrated with a certificate, traceability is maintained in quality records without additional steps. The compact design and hardened finish ensure robust handling in busy production areas and consistent tactile feedback for operators. Integration into quality workflows and documentation The master plug is suitable for entry into a quality management system as a reference artefact. Its defined M100 x 3.0 geometry makes it straightforward to reference in inspection plans, and the supplied calibration documentation supports audit requirements. For batch control or first‑article inspection the gauge offers a fast, low‑complexity method to verify internal threads against ISO metric fine standards. Contact Metav Werkzeuge for delivery from Emmerich and tailored advice on using this Metav IndustryLine plug gauge in existing inspection processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.500.8 GTIN: 4054469153971 Weight: 1.8 kg Data Thread size: M100 x 3.0 Standard: DIN 13, 6H Customs tariff number: 90173000 Special features Calibrated; calibration certificate included Material: gauge steel, hardened Right‑hand thread (GUT) FAQ What does GUT mean on this plug gauge? GUT indicates the go (acceptance) end of the plug gauge; the Thread plug gauge GUT M100 x 3.0 checks that the internal thread meets the minimum material and form limits. Is the gauge delivered with traceable documentation? Yes — the tool is supplied calibrated and includes a calibration certificate for traceability and quality records. Which standard does this gauge conform to? The gauge is manufactured to DIN 13, 6H, which defines the metric ISO fine thread tolerance class used for inspection. What material is the gauge made from and how does that help? Made from hardened gauge steel, the plug gauge offers wear resistance and consistent performance over many inspection cycles. Can this gauge be used in serial production monitoring? Yes — the plug gauge is intended for fast go/no‑go verification in production and incoming inspection to support routine quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x3 Thread Go Ring For ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Hardened gauge-steel construction and DIN 13, 6g tolerance provide repeatable GO/NO‑GO checks for external metric fine threads; supplied with a calibration certificate for traceability. Order the GO thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. GO thread ring gauge M100 x 3.0 — Right‑hand, DIN 13 (6g) — Metav IndustryLine A GO thread ring gauge M100 x 3.0 designed for fast verification of external metric ISO fine threads in production and inspection settings Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Right‑hand M100 x 3.0 GO gauge Fast, reliable checks for production control A ring gauge of this specification enables concise GO/NO‑GO decision-making at the production line, reducing rework and downtime. The nominal size M100 x 3.0 matches the common metric fine‑thread profile and, paired with the 6g tolerance grade under DIN 13, delivers the industrial acceptance limits most machining and inspection routines expect. Using a dedicated ring gauge for external threads shortens inspection time compared with full dimensional measurement, while maintaining objective pass/fail results that support consistent quality control. Durable design for repetitive use Manufactured from hardened gauge steel, the gauge resists wear over repeated engagement with threaded parts, preserving measurement integrity and extending service life. The hardened material combined with precise manufacturing keeps the functional profile stable, which is especially important in high‑volume turning and thread‑rolling operations where thousands of checks can be required. The right‑hand orientation and GO designation are optimised for routine verification of male threads, ensuring quick tactile confirmation without complex fixturing. Traceable calibration to support conformance Supplied with a calibration certificate, the gauge arrives ready for documented use in quality systems; the certificate documents the inspection at point of delivery and supports traceability in audit scenarios. This documented verification helps integrate the tool into documented inspection plans and process control records. For suppliers and manufacturers requiring consistent product quality, the presence of a calibration record minimises administrative follow‑up and speeds approval for incoming inspection or in‑process checks. For assured thread verification using the Metav IndustryLine GO ring gauge, contact Metav Werkzeuge in Emmerich for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.700.8 GTIN: 4054469154350 Nominal thread: M100 x 3.0 Material: Gauge steel, hardened Designation: GO (GUT) ring gauge Standard: DIN 13, tolerance 6g Weight: 1.8 kg HS code: 90173000 Facts Nominal size: M100 x 3.0 Tolerance grade: 6g Right‑hand thread Delivery: with calibration certificate Category: Thread gauges / inspection tools Special features Durable, hardened gauge‑steel construction GO gauge for external metric ISO fine threads Suitable for production and inspection use Prepared for documented traceability on delivery FAQ What does the GO designation mean for this gauge? The GO designation indicates the gauge is a GO (GUT) ring intended to confirm that an external thread falls within the lower limit of the permitted tolerance; the GO thread ring gauge M100 x 3.0 allows immediate acceptance checks of male threads. Can this gauge be used on left‑hand threads? No; the delivered item is a right‑hand GO thread ring gauge and is manufactured for standard right‑hand thread verification. Is a calibration certificate included with delivery? Yes; the GO thread ring gauge M100 x 3.0 is supplied with a calibration certificate that documents its conformity at the time of dispatch. What standard and tolerance does the ring gauge follow? The gauge is manufactured to DIN 13 and conforms to the 6g tolerance grade, which is commonly used for external metric fine threads in industrial applications. Which materials and applications is the gauge intended for? The gauge is intended for verification of external metric ISO fine threads across typical fastening and turned components; material compatibility depends on the part being inspected rather than the gauge itself. How should the gauge be stored to maintain accuracy? Store the gauge in a clean, dry environment and avoid impacts; keeping the instrument in its protection packaging when not in use preserves the hardened surface and the calibrated condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com