Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M100x3 Thread Go/No-Go Plug Gauge Metric ISO Fine Pitch Right-Hand With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 fit 6H and a supplied calibration certificate to maintain clear go/no-go inspection criteria in production; order directly via Metav Werkzeuge or consult the Metav team for availability and delivery options. Thread plug gauge (reject grade) M100 x 3.0 — metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge (reject grade) M100 x 3.0 is a right‑hand metric ISO fine‑thread gauge intended for pass/fail inspections of internal threads in workshop and production settings. Hardened gauge steel for durable use Metric ISO fine thread M100 x 3.0 Conforms to DIN 13 tolerance class 6H Supplied with calibration certificate Reliable inspection for metric fine threads A plug gauge is the established tool for quick, objective verification of internal thread conformity. The supplied M100 x 3.0 gauge is manufactured to DIN 13 with a 6H tolerance, providing a clear and standardised acceptance criterion for fine‑threaded parts. Built from hardened gauge steel, this gauge resists wear under normal inspection cycles so that the inspection result remains meaningful over time. Using a calibrated pass/no‑go gauge reduces the need for time‑consuming dimensional checks and supports consistent quality decisions on the shop floor. Traceability and quality assurance built in Delivered with a calibration certificate, the gauge provides documented traceability suitable for internal quality records and audit trails. The certificate confirms that the measuring faces were inspected and issued under standard calibration procedures; this supports reproducible inspection routines and integrates smoothly into existing quality systems. Metav IndustryLine’s role as a quality filter for the European market ensures that even items offered as reduced grade are identified clearly and supplied with the necessary documentation for traceable use. Practical handling and fit for purpose The right‑hand configuration suits standard metric components and is intended for straightforward go/no‑go inspection workflows. The gauge’s hardened gauge steel construction gives a robust contact surface while the compact, single‑piece design minimises handling effort and the risk of misalignment during checks. For everyday use in production or incoming goods inspection, the plug gauge offers a fast, repeatable decision mechanism; for long‑term preservation, store in a dry case and protect the measuring ends from knocks and debris to retain measurement integrity. For advice on using Metav IndustryLine calibrated thread gauges or to secure stock of the M100 x 3.0 plug gauge through Metav Werkzeuge, contact Metav Werkzeuge for current availability and delivery options. Technical data Article number: M315.600.8 GTIN: 4054469154169 Tariff number: 90173000 Facts Thread size: M100 x 3.0 Tolerance / fit: 6H (DIN 13) Weight: 1.8 kg Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Supplied with calibration certificate Offered as reject grade (AUSSCHUSS) Category: gauges / plug gauge FAQ Is this gauge supplied with calibration documentation? Yes. The thread plug gauge M100 x 3.0 is supplied with a calibration certificate confirming inspection of the measuring faces under standard calibration procedures. What does the tolerance 6H mean for a plug gauge? The 6H rating, specified in DIN 13, denotes the internal thread tolerance class; it defines the acceptable limits for fit when used with corresponding external thread gauges or parts. Can this gauge be used for production inspection? Yes. The plug gauge is intended for pass/no‑go checks in incoming goods, assembly and production environments where quick, objective verification of thread conformity is required. What does AUSSCHUSS (reject grade) indicate? AUSSCHUSS denotes that the item is offered as a reduced‑grade or reject‑grade piece; the product is still supplied with its calibration certificate so that its inspection status and traceability are documented. Which material is the gauge made from and how should it be cared for? The gauge is manufactured from hardened gauge steel; keep it clean, dry and protected from mechanical shock to preserve the measuring faces and ensure repeatable results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x4 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
The combination of DIN 13, 6H conformity, hardened gauge steel construction and a supplied calibration certificate ensures reliable, reproducible thread inspection; this reduces rework and supports traceable quality control. Order the plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Go plug gauge M100 x 4.0 — metric ISO fine thread, right-hand The Go plug gauge M100 x 4.0 is a dedicated inspection gauge for verifying conformity of metric ISO fine internal threads in production and incoming inspection. Calibrated with certificate included Hardened gauge steel construction Conforms to DIN 13, 6H tolerance For M100 x 4 metric fine threads Ensure thread conformity with standardised checks A plug gauge provides a binary, highly reliable check of internal thread dimensions: the go end verifies that the thread is within the maximum material condition permitted by the standard. Manufactured to DIN 13, 6H, this gauge gives a measurable, repeatable criterion for acceptance or rejection, simplifying inspection routines and reducing interpretation errors. The result is faster in-process control and fewer downstream failures, which directly benefits production throughput and component interchangeability. Durable construction for routine shop-floor use Made from hardened gauge steel, the gauge is designed to withstand repeated use in workshop environments while maintaining dimensional stability. Its robust build and a mass of 1.8 kg help resist accidental distortion during handling, so calibration intervals remain predictable. The right-hand metric thread form and the specified M100 x 4 geometry match common engineering practice for fine threads, making the gauge suitable for mechanical engineering, mould and tool shops, and quality departments that require dependable, low-maintenance tooling. Traceability and quality-management compatibility Supplied with a calibration certificate, the gauge supports traceable measurement processes and documentation for quality systems. The certificate records the inspection status at delivery and aids in audit trails for batch acceptance or supplier evaluation. Using a calibrated gauge as part of a sampling plan enables objective decisions and supports continuous improvement measures by linking inspection outcomes to corrective actions and process capability studies. Practical integration into inspection workflows As a straightforward go/no-go instrument, the gauge reduces operator training time: inspection outcomes are immediately evident, minimising ambiguity at the control station. Its compatibility with standard thread specifications streamlines communication between design, production and quality teams, helping to avoid misinterpretation of thread classes. For operations that run frequent thread checks, this approach yields consistent results and lowers the probability of costly rework caused by undetected thread faults. For precision, traceability and robust workshop performance request the Metav IndustryLine go plug gauge M100 x 4 with calibration certificate from Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M315.500.9 GTIN: 4054469154732 Weight: 1.8 kg Thread size: M100 x 4 Tariff number: 90173000 Facts Standard: DIN 13, 6H Right-hand thread Materials & features Material: gauge steel, hardened Includes calibration certificate Category: Thread plug gauge / inspection gauge FAQ Is the gauge delivered with a calibration document? The go plug gauge M100 x 4.0 is supplied with a calibration certificate, which documents the inspection status at delivery. Which standard does the gauge comply with? Compliance is to DIN 13, 6H, ensuring the thread class matches metric ISO fine-thread requirements. What material is the gauge made from? The gauge is manufactured from hardened gauge steel, chosen for dimensional stability and wear resistance. Is this gauge suitable for right-hand threads only? Yes, this version is specified for right-hand metric ISO fine threads in M100 x 4 geometry. Can the gauge be used in production for frequent checks? The robust construction and included calibration certificate make it suitable for routine shop-floor inspections and production sampling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x4 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a purpose‑designed no‑go thread plug gauge with hardened gauge steel and DIN‑compliant tolerances for reliable pass/fail decision making on metric fine threads; supplied with a calibration certificate for traceability. Order this gauge directly via Metav Werkzeuge or ask our consultants if needed. No‑Go Thread Plug Gauge M100×4 — right‑hand, hardened gauge steel (Metav IndustryLine) The no‑go thread plug gauge M100×4 is a precision inspection tool for checking M100 × 4.0 metric ISO fine threads (right‑hand), designed for pass/fail assessment in production and quality control. No‑go plug gauge M100×4, right‑hand Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Ensure reproducible thread control across production The principal benefit of this inspection plug is fast, unequivocal verification: the no‑go characteristic provides a clear reject criterion so that non‑conforming threads are identified immediately, avoiding downstream assembly problems. Built to DIN 13 with a 6H tolerance class, the gauge translates thread geometry into a simple pass/fail decision, reducing interpretation time during routine checks. The documented calibration ensures measurement traceability and supports quality records. Built for long service life and consistent results Constructed from hardened gauge steel, the plug gauge resists wear and preserves its reference geometry over many cycles, which reduces replacement frequency and measurement drift. The compact, single‑piece design resists deformation and maintains concentricity in repeated use. A supplied calibration certificate confirms the initial conformity of the master and allows integration into accredited inspection routines, increasing confidence in batch acceptance and in‑house quality standards. Practical use in inspection routines and process control The gauge is intended for quick manual checks at incoming inspection, at the machine or at the final control station. Its right‑hand thread form matches standard production threads, enabling direct comparison without elaborate fixturing. Using a dedicated no‑go plug streamlines operator decisions and supports lean inspection workflows, helping to reduce rework and prevent faulty components entering assembly. Traceability of each check is facilitated by the calibration documentation supplied with the gauge. Choose the Metav IndustryLine calibrated no‑go plug gauge for robust thread control and contact Metav Werkzeuge in Emmerich for application advice or to arrange supply. Technical data Article number: M315.600.9 GTIN: 4054469154916 Weight: 1.8 kg Material: hardened gauge steel Size: M100 × 4.0 Norm: DIN 13, 6H Tariff code: 90173000 Special: supplied with calibration certificate Type: no‑go thread plug gauge (reject gauge) Thread hand: right‑hand Core specifications Thread size: M100 × 4.0 mm Tolerance class: 6H Mass/weight: 1.8 kg Standard: DIN 13 Design & special features No‑go (reject) function for clear pass/fail Hardened gauge steel for wear resistance Supplied with calibration certificate for traceability Designed for metric ISO fine threads (right‑hand) Suited to routine quality control and incoming inspection FAQ What is the intended use of this no‑go plug gauge? The no‑go thread plug gauge is intended for rapid pass/fail inspection of M100 × 4.0 metric ISO fine threads; it identifies rejects at inspection points using a definitive no‑go criterion. Does the gauge come with calibration documentation? Yes, the gauge is supplied with a calibration certificate confirming initial conformity, which supports traceability in quality records for the Metav IndustryLine no‑go thread plug gauge (SKU M315.600.9). Which standards does the gauge comply with? This plug gauge is manufactured to meet DIN 13 and the tolerance class 6H applicable to metric ISO threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x4 Thread Go Gauge, ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened thread ring gauge that combines strict DIN 13 compliance with traceable calibration for reliable production and incoming inspection. The M100×4 go gauge speeds up pass/fail checks, while the supplied calibration certificate ensures documented accuracy — order directly via Metav Werkzeuge or contact our consultants for specification advice. Gewinde-Lehrring GUT M 100 X 4,0 — Go thread ring gauge, M100×4, hardened steel Gewinde-Lehrring GUT M 100 X 4,0 is a metric ISO fine-thread go ring gauge intended for right-hand threads, designed for use in inspection benches and production control Go gauge for M100×4 thread checks Hardened gauge steel construction Supplied with calibration certificate Compliant with DIN 13 tolerance 6g Reliable inspection based on recognised thread standards The ring is manufactured from hardened gauge steel and produced to DIN 13, tolerance 6g, delivering a dependable reference for thread acceptance testing. As a go gauge, the component provides a quick, binary inspection method: it confirms that a thread is within the allowable maximum material limits. This simple verification reduces cycle time in quality control and supports consistent assembly performance. The combination of standard conformity and robust material ensures longevity under frequent use on the shop floor or in the inspection room. Traceable calibration for audit-ready measurement Supplied with a calibration certificate, the gauge offers documented traceability for quality systems and supplier audits. The certificate records the measured compliance of the ring and provides evidence for measurement uncertainty budgeting in quality plans. For companies maintaining documented inspection records, this calibrated reference instrument integrates directly into established measurement procedures and supports continuous compliance without additional onsite verification steps. Practical design for workshop and laboratory use With a compact, machined form and a weight of 1.8 kg, the gauge balances handling stability and robustness for repeated checks. Its specification as a right‑hand metric ISO fine‑thread ring makes it suitable for a wide range of production and incoming‑goods inspections in machine shops, toolmaking and component manufacturing. The durable finish and hardened substrate reduce wear, so the ring sustains accuracy over time and frequent contact — an investment that helps maintain assembly quality and minimise rework. Contact Metav Werkzeuge GmbH in Emmerich for delivery details, calibration records and expert advice on integrating this calibrated M100×4 go ring gauge into existing inspection routines — Tel: +49 2822 7131930 • Email: info@metav-werkzeuge.com Technical data Article number: M315.700.9 GTIN: 4054469155098 Designation: Gewinde-Lehrring GUT M 100 X 4,0 Specifications Thread size: M100×4 Tolerance class: 6g Weight: 1.8 kg Tariff code: 90173000 Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Supplied with calibration certificate Type: Go gauge (GUT) Complies with DIN 13 FAQ What is the primary use of this ring gauge? The ring gauge is intended for rapid pass/fail inspection of M100×4 metric ISO fine threads; the go function confirms that threads meet the upper limit of the tolerance. Is the gauge delivered calibrated? Yes, the ring gauge is supplied with a calibration certificate, providing traceable measurement evidence suitable for quality documentation. Which standard does the gauge comply with? The gauge is manufactured according to DIN 13 and specified to tolerance class 6g, matching standard metric fine‑thread inspection requirements. Can this gauge be used in production and incoming inspection? The M100×4 go ring gauge is suitable for both shop‑floor production checks and laboratory incoming‑goods inspections thanks to its hardened construction and calibrated status. What material is the gauge made from? The gauge is produced from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x4 Thread Go Ring Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of a hardened gauge‑steel design combined with DIN 13 tolerance class 6g and a supplied calibration certificate for dependable pass/fail inspection — order directly via Metav Werkzeuge or consult our specialists for application advice. No‑go thread ring gauge M100 x 4.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) The No‑go thread ring gauge M100 x 4.0 is a hardened, right‑hand metric ISO fine‑thread ring gauge intended for production quality control and go/no‑go verification in mechanical workshops and component inspection. Supplied with calibration certificate Hardened gauge steel construction DIN 13 tolerance class 6g Right‑hand metric fine thread M100 x 4.0 Fast, reliable pass/fail inspection to reduce scrap A dedicated no‑go ring simplifies routine thread checks by making failure states instantly visible during inline inspection. The hardened gauge steel body resists wear, sustaining the plug‑and‑ring geometry critical for repeatable verification; this reduces rework and material loss in serial production. Conformity to DIN 13 and the specified 6g tolerance ensures that measurements align with established engineering practice, enabling quick decisions on part acceptance without elaborate measurement setups. Built for workshop endurance and traceable quality The ring is manufactured from hardened gauge steel, a choice that balances durability with dimensional stability under regular use. A calibration certificate is supplied with the product, documenting traceability and baseline conformity for quality records; this supports internal audits and incoming inspection procedures. The compact, purpose‑built design keeps handling straightforward and inspection throughput high, which is particularly useful for busy assembly lines and inspection benches. Clear specification and integration into inspection routines Marked as a right‑hand metric fine thread with the designation M100 x 4.0, the gauge follows recognised metric thread geometry so it fits established tooling and inspection jigs. Using a dedicated no‑go ring as part of a control plan streamlines operator training: the checking step is binary and repeatable, improving statistical process control and lowering the likelihood of out‑of‑tolerance parts passing unnoticed. The ring’s robust construction and standard compliance make it suitable for machine shops and quality labs that require consistent, fast decisions. For dependable thread verification with full traceability, choose the Metav IndustryLine no‑go ring and contact Metav Werkzeuge for personalised application support or to place an order — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M315.800.9 GTIN: 4054469155272 Weight: 1.8 kg Material: hardened gauge steel Designation: No‑go ring gauge M100 x 4.0 Standard: DIN 13, 6g Numbers / Core technical data Thread size: M100 x 4.0 Tolerance class: 6g Tariff number: 90173000 Special features / Versions Right‑hand metric fine thread Supplied with calibration certificate Intended for go/no‑go (reject) inspection Category: gauges / ring gauges FAQ What does the calibration certificate include? The supplied calibration certificate documents the initial inspection and traceability for the Metav IndustryLine no‑go ring gauge M100 x 4.0 (Article number M315.800.9), suitable for retention in quality records. Is this ring suitable for production use on an inspection bench? Yes, the hardened gauge‑steel construction and DIN 13, 6g specification make the ring gauge well suited for routine production and bench checks where quick go/no‑go assessment is required. Does the gauge measure left‑hand threads? This particular ring is manufactured for right‑hand metric fine threads; left‑hand versions require a dedicated left‑hand ring gauge. How should the ring be handled to minimise wear? Handle the ring with care, store it clean and protected, and use only for verification as part of the control plan; the hardened steel construction extends service life but careful handling preserves calibration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x6 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H Calibrated Certificate - Metav IndustryLine
Take advantage of a rugged, standards‑compliant inspection tool that combines hardened gauge steel, a DIN 13, 6H thread form and an included calibration certificate for immediate traceability and reliable in‑process acceptance. Order the Go thread plug gauge directly via Metav Werkzeuge or ask our consultants for application advice. Go thread plug gauge M100 x 6 (right‑hand) — hardened gauge steel, DIN 13, 6H — Metav IndustryLine A Go thread plug gauge M100 x 6 designed for rapid verification of metric ISO fine internal threads in production and quality inspection environments Hardened gauge steel construction Calibration certificate supplied Conforms to DIN 13, 6H Right‑hand metric fine thread M100×6 Speed up process control with a single verification step A dedicated Go plug gauge performs a clear go/no‑go check that removes ambiguity from everyday thread inspection. The solid design and defined thread form allow immediate acceptance testing on batches and assemblies, reducing cycle time compared with tactile or optical checks. The M100×6 nominal size and DIN 13, 6H specification make the gauge suitable for metric ISO fine threads commonly found in heavy‑duty fastenings and precision assemblies, while the right‑hand orientation matches standard production threads. Measurable process stability is achieved because every passed component meets the same documented criterion. Durable construction and documented traceability for long service life Manufactured from hardened gauge steel, the tool resists wear and keeps its pass geometry stable over repeated use, which preserves measurement reliability and lowers replacement frequency. The delivery includes a calibration certificate, providing documented traceability back to the inspection laboratory; this supports internal quality records and incoming audit requirements. The compact, balanced geometry and a weight of 1.8 kg ensure the gauge is robust in handling yet straightforward to position during shopfloor checks. Where traceability and repeatability matter, the combination of material choice and certified calibration minimises uncertainty. Practical integration into workshop inspection routines The plug gauge suits inline checks, incoming inspection and dedicated inspection benches: it is simple to use, requires no power supply and produces unequivocal results. The single‑feature acceptance reduces training time for operators and lowers the risk of interpretation errors during high‑volume inspections. For documentation and stock management, the tool carries a clear identifier (SKU M315.500.A) and a GTIN for procurement and inventory systems. Choosing a standards‑based gauge from a recognised range ensures compatibility with maintenance procedures and calibration intervals commonly used in industrial quality management. For certified thread inspection and application support from Metav IndustryLine, contact Metav Werkzeuge to discuss suitability for specific components and to arrange prompt delivery from Emmerich. Technical data Article number: M315.500.A GTIN: 4054469155456 Tariff number: 90173000 Core figures Nominal thread: M100 x 6 Weight: 1.8 kg Special features Material: hardened gauge steel Tolerance/standard: DIN 13, 6H Type: Go (GUT) plug gauge, right‑hand Supplied with calibration certificate FAQ What is the intended use of this plug gauge? The plug gauge is intended for go/no‑go verification of internal metric ISO fine threads, specifically M100 x 6 nominal size, and is used to confirm acceptance to the DIN 13, 6H specification. Is a calibration certificate included with the gauge? Yes, the Go thread plug gauge M100 x 6 is supplied with a calibration certificate that documents its inspection status and traceability for quality records. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel; this increases wear resistance and preserves the pass geometry over many inspection cycles, ensuring consistent acceptance decisions. Can this gauge be used for left‑hand threads? No, this specific gauge is manufactured for right‑hand threads; left‑hand versions must be ordered separately where required. How is the product identified for procurement and inventory? The product is listed as SKU M315.500.A and GTIN 4054469155456 for purchase orders and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x6 Thread Go Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take control of thread inspection with a hardened, DIN‑rated no‑go ring that protects production quality and reduces the risk of escaped defects; supplied with a traceable calibration certificate for immediate use. Order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge NO‑GO M100 x 6.0 — Right‑hand, DIN 13 (6g) by Metav IndustryLine The Thread ring gauge NO‑GO M100 x 6.0 is a right‑hand metric ISO fine‑thread ring intended for quick verification of external threads in production and incoming‑goods inspection. No‑go ring gauge M100 x 6.0 Hardened gauge steel construction DIN 13 tolerance class 6g Supplied with calibration certificate Robust verification for continuous production The no‑go ring performs a clear go/no‑go check that prevents non‑conforming threads from progressing through the process. Manufactured from hardened gauge steel, the ring offers high wear resistance and stable geometry, which supports consistent repeatability on the shop floor. Using a dedicated reject gauge reduces rework and scrap by giving a binary, fast decision during high‑rate inspections, improving throughput without compromising quality. Precision and standard compliance explained This ring corresponds to DIN 13 (6g) for metric ISO fine threads and is sized M100 x 6.0, providing the correct tolerance envelope for many heavy‑duty fittings and assemblies. The no‑go function verifies that the external thread does not exceed the upper material limit; in practice this avoids assembly problems and ensures compatibility with mating parts. Supplied with a calibration certificate, the gauge is ready for documented use in quality control processes and supports traceability in audit situations. Practical handling and inspection benefits The right‑hand configuration and robust construction make the gauge simple to use at the inspection bench or on the production line. The clear go/no‑go outcome means measurements do not require specialised metrology staff for every check, enabling operators to perform acceptance checks quickly and reliably. As a standardised tool for thread control, the ring supports reproducible quality decisions and integrates easily into existing inspection routines. Contact Metav Werkzeuge today to secure this M100 no‑go thread ring gauge and ensure traceable, fast thread inspection — specialists in Emmerich are available by phone or e‑mail to advise on integration and calibration options Technical Data Article number: M315.800.A GTIN: 4054469155845 Tariff number: 90173000 Weight: 1.8 kg Size: M100 x 6.0 Facts Tolerance class: 6g Handedness: right‑hand thread Standard: DIN 13 Material: gauge steel, hardened Special features No‑go (reject) ring gauge Supplied with calibration certificate Intended for metric ISO fine threads Category: gauges / inspection rings FAQ What is the primary purpose of this ring gauge? The ring is a no‑go control intended to check external threads; the thread ring gauge NO‑GO M100 x 6.0 by Metav IndustryLine confirms that parts do not exceed the permissible maximum material condition. Is the gauge delivered ready for use in documented inspection? Yes, the product is supplied with a calibration certificate that provides traceability for quality records and immediate deployment in inspection routines. Which standard and tolerance does this gauge follow? The ring adheres to DIN 13 with a tolerance class of 6g, matching common metric ISO fine‑thread specifications for production control. What material is the gauge made from and why is that important? Constructed from hardened gauge steel, the ring maintains its geometry under repeated use; this hardness supports long‑term dimensional stability and repeatability in routine checks. Can this gauge be used on left‑hand threads? No, this particular ring is configured for right‑hand threads; left‑hand verification requires the corresponding handed ring. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x6 Thread Go/No-Go Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN‑compliant tolerance and an included calibration certificate for reliable thread inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (NO‑GO) M100 x 6.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug gauge (NO‑GO) M100 x 6.0 is a hardened inspection gauge designed for rapid go/no‑go assessment of metric ISO fine threads in a production or quality‑control environment. Metric ISO fine thread M100 x 6,0 right‑hand Hardened gauge steel for long service life Conforms to DIN 13 tolerance 6H Supplied with calibration certificate Fast, unambiguous reject detection for fine threads The primary advantage of this inspection tool is straightforward reject detection for large‑diameter fine threads. Designed for the M100 x 6.0 metric ISO fine thread, the gauge acts as a definitive check: if the NO‑GO end enters, the thread does not meet the DIN 13 / 6H tolerance and is classified accordingly. This method converts complex diameter and pitch checks into a single, rapid control step, improving throughput while maintaining objective quality criteria. The clear pass/fail principle reduces interpretation time on the shop floor and supports consistent decision‑making. Robust materials and geometry for repeatable results Manufactured from hardened gauge steel, the plug gauge resists wear and maintains its geometry under repeated use, which keeps inspection variation to a minimum. The right‑hand configuration matches standard threaded components, and the solid construction gives stable handling during measurement. Because the gauge is tailored to the ISO fine thread form, it reproduces the mating geometry precisely; this ensures that production controls reflect functional assembly behaviour rather than approximated checks. The compact, tool‑grade design also simplifies storage and integration into routine inspection workflows. Traceable calibration for quality assurance and documentation Delivered with a calibration certificate, the gauge supports traceability and documentation requirements in quality systems. The certificate documents the inspection status at delivery and provides a verifiable baseline for subsequent recalibration intervals. For manufacturers and inspection labs that rely on documented conformity, the supplied calibration certificate reduces administrative effort and strengthens audit readiness. Where traceability is required, choosing a gauge with an accompanying calibration document ensures measured results can be trusted and defended in process control records. Request the Metav IndustryLine NO‑GO thread plug M100 x 6.0 with calibration certificate from Metav Werkzeuge for consistent, DIN‑aligned thread inspection — contact Metav Werkzeuge for specification guidance and fast supply. Technical data SKU: M315.600.A GTIN: 4054469155586 Label: Gewinde-Lehrdorn AUSSCHUSS M 100 X 6,0 für metrisches ISO-Feingewinde, rechts Facts Thread size: M100 x 6.0 Weight: 1.8 kg Tariff code: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13, 6H Function: NO‑GO (reject) thread plug gauge Supplied with calibration certificate FAQ What is the intended use of this gauge? The gauge is intended for go/no‑go inspection of M100 x 6.0 metric ISO fine threads; the NO‑GO end identifies threads outside the DIN 13, 6H tolerance. Is a calibration certificate included? Yes, the Metav IndustryLine thread plug gauge is supplied with a calibration certificate that documents the inspection status at delivery. Which standard and tolerance does the gauge check? The gauge is manufactured for metric ISO fine threads and checks conformance to DIN 13 with a 6H tolerance class. Can this gauge be used on left‑hand threads? No, this particular plug gauge is configured for right‑hand threads as stated in the product description. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M100x6 Thread Ring Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, conformity to DIN 13 (6g) and a supplied traceable calibration certificate for reliable, ready-to-use thread inspection. Order the calibrated gauge directly via Metav Werkzeuge or consult the Metav team for application advice and delivery. Thread ring gauge M100 x 6.0 — GO type (right-hand) Thread ring gauge M100 x 6.0 is a Go ring gauge for acceptance testing of internal metric ISO fine threads, engineered for workshop and production use. GO thread ring for M100 x 6 metric fine threads Hardened gauge steel construction Supplied with traceable calibration certificate Conforms to DIN 13 tolerance class 6g Consistent Go/No‑Go control for production efficiency A dedicated GO ring gauge such as this provides a fast, unambiguous decision at the inspection point: the part either fits the acceptance gauge or it does not. The combination of M100 x 6 geometry and the DIN 13, 6g tolerance class ensures compatibility with metric ISO fine-thread specifications, which simplifies process control and reduces secondary checks. Using a purpose-made acceptance gauge reduces throughput time and avoids rework by delivering an immediate binary result that integrates seamlessly into incoming inspection or final assembly workflows. Material choice and mechanical robustness that reduce uncertainty Manufactured from hardened gauge steel, the ring maintains profile and dimensional stability over extended use, which lowers long‑term measurement drift. The hardened material gives resistance against wear from repeated engagement with threaded parts, extending service intervals and preserving the original tolerance band. For workshop environments where tools are handled frequently, this robustness translates into predictable inspection behaviour and fewer replacements, supporting continuous production without surprise downtime. Traceable calibration for quality systems and audits Delivered with a traceable calibration certificate, the gauge is ready to enter documented quality loops and measurement plans. The supplied calibration evidence enables immediate labelling in quality records and supports traceability during audits. For quality managers, the certificate removes an additional administrative step and provides confidence that the ring meets documented acceptance criteria at the time of supply. This traceability helps maintain compliance with internal control plans and simplifies supplier qualification processes. Practical design and handling for everyday inspection tasks The right‑hand configuration and clear nominal marking make the gauge straightforward to use at the bench. The Go ring design focuses on a single acceptance criterion, which is ideal for high-volume inspection, first‑off checks, or quick spot checks on the shop floor. The gauge’s mass and balanced geometry aid handling and engagement with components; operators can conduct repeated checks with consistent technique, leading to reproducible outcomes and less operator-induced variation. Reliability through manufacturer backing and distribution As part of the Metav IndustryLine offering, this ring benefits from distribution and quality filtering via Metav Werkzeuge in Emmerich. Metav’s role as a precision partner and its broad product range provide logistical reliability and expert advice for industrial customers. The availability of calibrated gauges ready for immediate use shortens lead times and supports lean inventory strategies for metrology equipment. For calibrated inspection equipment and application support, contact Metav Werkzeuge in Emmerich to request the calibrated M100 x 6.0 GO thread ring gauge and discuss integration into existing quality processes Technical data SKU: M315.700.A GTIN: 4054469155715 Weight: 1.8 kg Facts Size: M100 x 6 Standard: DIN 13, 6g Tariff number: 90173000 Special features Hardened gauge steel Right‑hand thread Calibration certificate included GO (GUT) acceptance gauge Category: Gauges / Thread gauges FAQ What is the intended use of this thread ring gauge? The thread ring gauge M100 x 6.0 GO is intended for Go/No‑Go acceptance testing of internal metric ISO fine threads in production and inspection workflows. Does the gauge arrive calibrated? Yes, the thread ring gauge M100 x 6.0 is supplied with a traceable calibration certificate, enabling immediate use in documented quality systems. Which tolerance does this ring gauge check against? This ring checks the GO condition according to DIN 13 tolerance class 6g for M100 x 6 metric fine threads. What material is the gauge made from? The gauge is produced from hardened gauge steel for enhanced wear resistance and dimensional stability during repeated inspections. Is this gauge suitable for automated inspection systems? The M100 x 6.0 GO ring gauge is primarily a manual acceptance gauge; integration into automated systems may require additional fixturing or sensors to translate the GO/No‑Go result into a digital signal. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x1.5 Screw Gauge Ring, Right-Hand Thread, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Taking advantage of a hardened gauge steel construction and conformity to DIN 13, 6g, this ring gauge offers reliable pass/fail inspection for metric ISO fine threads while reducing rework and scrap; supplied with a calibration certificate, it supports traceable quality control—order the gauge via Metav Werkzeuge or contact our consultants for tailored advice. Thread Ring Gauge GUT M105 x 1.5 — hardened gauge steel, DIN 13 tolerance The Thread Ring Gauge GUT M105 x 1.5 is a hardened master ring for inspection of metric ISO fine threads (right‑hand), designed for repeatable go/no‑go checks in production and incoming‑goods inspection Hardened gauge steel construction DIN 13, tolerance class 6g Supplied with calibration certificate Consistent inspection accuracy for production control The ring serves as a compact, unambiguous reference for thread acceptance, providing a fast go/no‑go decision that speeds up inspection routines and reduces assembly errors. Manufactured from hardened gauge steel, the master gauge resists wear and preserves its profile over repeated use, so batch checks remain reliable over time. Conformity with DIN 13, 6g gives procurement and quality teams a clear technical basis for acceptance criteria, simplifying audit trails and supplier communication. Durable design that keeps measurement uncertainty low Thanks to the robust material choice and precision machining, the gauge minimises geometry changes that lead to measurement drift; this improves reproducibility in workshop and shop‑floor environments. The calibration certificate supplied with delivery documents the initial condition of the gauge and enables traceable calibration records for internal quality management. Where repeatability and reduced maintenance are priorities, the wear‑resistant construction translates directly into lower lifetime costs and fewer unplanned stoppages. Practical benefits for quality assurance and traceability The ring gauge is suited to routine inspection, incoming goods checks and spot tests during production. As a direct inspection tool the gauge eliminates interpretation steps associated with comparative measurements, offering immediate decisions at the control point. The compact form and clear specification make integration into existing QA procedures straightforward, while the documented calibration supports conformity assessments and customer audits. For manufacturers requiring consistent thread quality, this master ring helps keep processes on specification. For traceable thread inspection and reliable go/no‑go testing, request the Metav IndustryLine Thread Ring Gauge M105 x 1.5 from Metav Werkzeuge — our consultants at Metav Werkzeuge can advise on inspection strategy and supply the gauge with its calibration documentation Technical Data Article number: M315.705.6 GTIN: 4054469152493 Weight: 1.8 kg Material: gauge steel, hardened Size: M105 x 1.5 Standard: DIN 13, 6g Facts Thread pitch: 1.5 mm Major diameter: M105 Tariff number: 90173000 Special features Supplied with calibration certificate Right‑hand metric ISO fine thread Designed for go/no‑go inspection Category: master ring gauge (inspection gauge) FAQ What is the intended use of this ring gauge? The Thread Ring Gauge GUT M105 x 1.5 is intended for go/no‑go inspection of metric ISO fine threads in production control and incoming‑goods checks. Does the gauge come with traceable documentation? Yes, the Metav IndustryLine Thread Ring Gauge M105 x 1.5 is supplied with a calibration certificate that documents its condition at delivery. What material and standard does the gauge comply with? The gauge is made from hardened gauge steel and is manufactured to meet DIN 13 with tolerance class 6g. How does this gauge affect long‑term measurement reliability? Hardened construction and precise machining reduce wear and help maintain the gauge profile, supporting reproducible inspection results over longer service intervals. Can this gauge be used on both left‑ and right‑hand threads? This particular ring is specified for right‑hand metric ISO fine threads (M105 x 1.5); left‑hand or other thread forms require a corresponding master gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x1.5 Thread Go/No-Go Ring Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of the combination of reproducible thread control, hardened gauge steel, and an included calibration certificate for consistent acceptance testing and fewer production rejects. Order the gauge directly via Metav Werkzeuge or consult the technical team for specification matching. No-go thread ring M105 x 1.5 — Right-hand, DIN 13, tolerance 6g (Metav IndustryLine) A No-go thread ring M105 x 1.5 designed for rapid verification of metric ISO fine threads in production, inspection and incoming‑goods operations. No-go ring for M105 x 1.5 threads Hardened gauge steel, DIN 13, 6g Delivered with calibration certificate Right-hand metric ISO fine thread Fast, repeatable thread acceptance for production lines The No-go ring enables immediate decision-making during assembly and quality control by providing a clear reject criterion: if the no-go gauge enters, the thread is out of tolerance. Manufactured from hardened gauge steel and finished to DIN 13, 6g, the ring offers durable contact surfaces that maintain form under repeated use. Its straightforward pass/fail function reduces inspection time compared with complex measuring routines and supports a higher throughput on the shop floor while keeping inspection effort minimal. Reduced rework through precise tolerance control Designed to match the nominal M105 x 1.5 metric fine thread geometry, the ring enforces the specified tolerance class so non-conforming parts are reliably identified before assembly. As a dedicated go/no-go instrument, it complements dimensional measuring equipment by removing ambiguity from visual or tactile checks. Supplied with a calibration certificate, the gauge documents traceable verification of its measurement state at delivery, which simplifies audit trails and quality records for production and purchasing departments. Robust construction for workshop and inspection environments The ring’s material composition—gauge steel, hardened—ensures resistance to wear and consistent performance over many cycles. The right‑hand orientation corresponds to standard metric fastening practice and suits both bench testing and fixture‑mounted checking. With a practical mass of 1.8 kg and a compact form, the device is easy to handle and store, while remaining stable during manual gauging. The simple geometry minimises the influence of handling on results, supporting reproducible go/no-go checks across operators. Integration into quality workflows and supplier control As a clear, mechanical control tool, the gauge supports rational quality decisions: fewer escapes to final assembly, faster supplier acceptance and lower rework costs. The physical nature of a go/no-go ring makes it ideal for recurring checks on production lines and in receiving inspections where rapid, objective answers are required. Combining this with Metav’s product supply and documentation ensures the gauge arrives ready for immediate use within established quality processes. For secure, documented thread inspection and fast supply, contact Metav Werkzeuge in Emmerich for advice and procurement of the Metav IndustryLine No-go thread ring M105 x 1.5. Technical data Article number: M315.805.6 GTIN: 4054469152738 Weight: 1.8 kg Material: Gauge steel, hardened Standard: DIN 13, 6g Thread size: M105 x 1.5 Tariff number: 90173000 Facts Nominal diameter: M105 Thread pitch: 1.5 mm Tolerance class: 6g Mass: 1.8 kg Right-hand thread Special features No-go (reject) gauge function Supplied with calibration certificate Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Category: Gauges / Go/no-go ring Brand: Metav IndustryLine FAQ What does a no-go thread ring check? The no-go ring checks whether an internal or external thread exceeds the upper limit of the specified tolerance; the Metav IndustryLine no-go thread ring M105 x 1.5 rejects threads that are oversized or out of tolerance. Is a calibration certificate included with the gauge? Yes, the gauge is delivered with a calibration certificate confirming its verification at the time of supply. What material is the ring made from? The ring is manufactured from hardened gauge steel to ensure long-term resistance to wear and reliable contact geometry. Which standard does the gauge comply with? The ring is finished to DIN 13, tolerance 6g, matching the dimensional requirements for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x1.5 Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
Combine secure out‑of‑tolerance detection with hardened gauge‑steel durability and DIN‑compliant tolerances for reliable thread inspection; order the NO‑GO thread plug gauge directly via Metav Werkzeuge or contact our consultants for clarification. NO‑GO Thread Plug Gauge M105 x 1.5 — Metav IndustryLine, hardened gauge steel The NO‑GO thread plug gauge M105 x 1.5 provides a definitive reject criterion for metric ISO fine threads (right‑hand), designed for production inspection and quality control. NO‑GO plug gauge for M105 x 1.5 Hardened gauge steel construction Supplied with calibration certificate Detect out‑of‑tolerance threads with certainty The primary function of this NO‑GO plug gauge is the rapid identification of internal threads that exceed permitted tolerances. Built to the DIN 13 tolerance system with 6H fit, the gauge provides a pass/fail checkpoint suited to production lines and incoming inspection. By offering an unequivocal reject condition, it removes subjective judgement from everyday checks and reduces downstream rework. The robust specification makes it appropriate for workshops and toolrooms that require clear go/no‑go decisions for metric ISO fine threads. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the mandrel provides high wear resistance and stable contact geometry over many inspection cycles. The solid build and balanced mass (approx. 1.8 kg) ensure that handling is comfortable while maintaining the geometry needed for repeatable results. For right‑hand threads in the M105 × 1.5 series, the plug form and finish are optimised to represent production mating conditions, which improves the relevance of each inspection and supports consistent quality control routines. Traceability and calibration for quality systems The gauge is delivered with a calibration certificate, enabling traceability within documented quality processes and aiding compliance with internal and external audits. Calibration ensures the item is measured against recognised standards before it reaches the shop floor, which simplifies first‑article inspection and supplier acceptance procedures. For regulated production environments or certified quality systems, this evidence of measurement conformity is a clear asset when integrating the gauge into routine inspection plans. For procurement or technical advice on the Metav IndustryLine NO‑GO thread plug gauge M105 x 1.5, contact Metav Werkzeuge in Emmerich for purchasing and specification support. Technical data Article number: M315.605.6 GTIN: 4054469152257 Tariff code: 90173000 Material: hardened gauge steel Standard: DIN 13, 6H Facts Weight: 1.8 kg Thread size: M105 x 1.5 mm Pitch: 1.5 mm Hand: right‑hand thread Special features NO‑GO (AUSSCHUSS) plug gauge Supplied with calibration certificate Category: plug gauges / gauges Intended for inspection of metric ISO fine threads FAQ What is the purpose of this gauge? The NO‑GO thread plug gauge is intended to identify internal threads that exceed tolerance limits; the Metav IndustryLine NO‑GO plug gauge M105 x 1.5 gives a clear reject signal during inspection. Is the gauge supplied calibrated? Yes, the gauge is supplied with a calibration certificate confirming its measured conformity prior to delivery. Which standard does the gauge follow? The plug gauge is manufactured to DIN 13 with a 6H tolerance class suitable for metric ISO fine threads. Can the gauge be used for left‑hand threads? This specific item is a right‑hand NO‑GO plug gauge for M105 x 1.5; left‑hand versions would require a different specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and conformity to DIN 13, 6H to ensure reproducible thread acceptance checks; the tool is supplied calibrated with a calibration certificate, so quality records remain complete — order the calibrated gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge GUT M105 x 2.0 — Metric ISO fine thread plug gauge, right-hand, Metav IndustryLine A thread plug gauge GUT M105 x 2.0 for fast verification of internal metric ISO fine threads in production, inspection and incoming goods control Calibrated with certificate included For metric ISO fine thread M105 x 2 Hardened gauge steel construction Conforms to DIN 13, 6H tolerance Right-hand thread checking Assured acceptance control for metric fine threads The calibrated plug provides a clear, objective result when verifying internal threads in components and assemblies. Designed for M105 x 2 metric ISO fine threads, the gauge supports standardised acceptance criteria by referencing DIN 13, 6H, which defines the tolerance fit for thread form and pitch. A calibration certificate is supplied with the instrument, offering traceability for quality management systems and simplifying documentation during audits. Using a dedicated plug gauge reduces subjective judgement in inspection and speeds up throughput in recurring checks. Robust materials and enduring accuracy Manufactured from gauge steel, hardened for wear resistance, the tool maintains geometric integrity over many inspection cycles and reduces the frequency of reprofiling or replacement. The substantial construction — weighing 1.8 kg — lends stability during use and helps preserve runout and thread form under workshop conditions. For right-hand metric ISO threads the plug is configured to perform quick go/no-go assessments of internal threads; the hardened material and precise machining minimise wear-induced deviation and support repeatable results across shift operations. Integration into workshop processes and upkeep The gauge is suitable for use at inspection benches, in quality control labs and as part of incoming goods routines where documented acceptance is required. The included calibration certificate ensures immediate use within traceable inspection procedures and supports routine re-calibration scheduling. Simple handling and straightforward cleaning after use reduce contamination risks; store the gauge in a protective case and follow regular verification intervals to keep measurements reliable. For bespoke application scenarios or compatibility checks with thread forms, technical clarification can be provided to align the gauge with existing workflows. For delivery, calibration details and fitting advice on the Metav IndustryLine M105 x 2 plug gauge, contact Metav Werkzeuge in Emmerich to arrange supply and specification support Technical data Article number: M315.505.7 GTIN: 4054469152974 Weight: 1.8 kg Material: Gauge steel, hardened Thread size: M105 x 2 Standard: DIN 13, 6H Core specifications Thread: M105 x 2 Tolerance class: 6H (per DIN 13) Tariff number: 90173000 ECLASS: 21170228 Special features Calibrated delivery with certificate Right-hand thread For metric ISO fine thread inspection Category: Gauges / Plug gauges Manufacturer brand: Metav IndustryLine FAQ What does the calibration certificate cover for this plug gauge? The supplied calibration certificate documents the measured conformity of the plug gauge to the stated dimensions and confirms traceability for the Metav IndustryLine M105 x 2 plug gauge. Is the gauge suitable for production line checks on fine threads? Yes, the plug is designed for production and incoming inspection of metric ISO fine threads and supports repeatable acceptance checks for the specified thread size. How does conformity to DIN 13, 6H affect use? Conformance to DIN 13, 6H means the gauge is made to a tolerance class appropriate for the specified internal thread fit, enabling standardised acceptance criteria when using the Metav IndustryLine gauge. What maintenance extends the service life of the gauge? Regular cleaning, careful handling and scheduled recalibration maintain accuracy; the hardened gauge steel construction reduces wear between service intervals for this thread plug gauge. Can this gauge be used for left-hand threads? This specific item is manufactured for right-hand threads only; select a left-hand variant for opposite-handed thread checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x2 Thread Go Ring Metric ISO Fine Pitch 6g Right-Hand, Hardened Gauge Steel, Calibrated Certificate - Metav IndustryLine
Product data contains conflicting quality information: the item is labelled as "AUSSCHUSS" (reject) while it is also marked as good. This discrepancy creates confusion and prevents the accurate classification of the product's quality status. It is essential to resolve this inconsistency to ensure clarity and reliability in the data. Without addressing this issue, it will not be possible to generate a precise and trustworthy product description. Please review the relevant quality assessments and update the information accordingly to eliminate any contradictions. Ensuring consistency in product data is crucial for maintaining high standards and facilitating effective communication across all platforms.
M105x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Reliable rejection control for fine threads: the hardened gauge steel construction, DIN 13, 6H tolerance and supplied calibration certificate make this plug gauge a robust choice for reproducible in‑process inspection of M105 x 2.0 right‑hand metric fine threads. Order the gauge directly via Metav Werkzeuge or discuss application details with our consultants. Thread plug gauge NO‑GO M105 x 2.0 — No‑go thread plug for metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread plug gauge NO‑GO M105 x 2.0 intended to verify rejection limits on right‑hand metric ISO fine threads in production and quality‑control environments. No-go gauge for M105 x 2.0 threads Hardened gauge steel construction Conforms to DIN 13, 6H tolerance Supplied with calibration certificate Consistent rejection control for fine threads A dedicated No‑go plug provides a clear, binary inspection result that prevents out‑of‑tolerance parts entering assembly. Designed for the M105 x 2.0 metric ISO fine thread, this tool checks the rejection boundary specified by DIN 13, 6H, allowing fast decisions at the inspection stage. By applying a no‑nonsense pass/fail approach, the gauge reduces subjective judgement and shortens throughput time, supporting consistent quality across batches. Built for durability and traceable results Manufactured from hardened gauge steel, the plug is dimensionally stable and resistant to wear under repeated use, which preserves the inspection limit over time. Supplied with a calibration certificate, the gauge arrives ready for documented acceptance testing and traceable measurement records. The hardened construction and certificate together minimise rework and costly downstream failures by ensuring that rejection criteria are verifiable and reproducible. Practical integration into production inspection The right‑hand no‑go plug is straightforward to integrate into routine checks at final inspection or in‑process quality gates. With a nominal size of M105 and a 2.0 mm pitch, the gauge is suited to control fine‑threaded components in metalworking and precision assembly operations. Its compact form and repeatable function simplify operator training and reduce inspection time per part, contributing to more efficient production cycles and fewer escaped defects. Choose the Metav IndustryLine NO‑GO thread plug gauge for dependable thread rejection control and contact Metav Werkzeuge for a tailored inspection recommendation and delivery details. Technical data Article number: M315.605.7 GTIN: 4054469153186 Size: M105 x 2.0 Material: Hardened gauge steel Standard: DIN 13, 6H Weight: 1.8 kg Tariff number: 90173000 Numbers / Core technical data Nominal diameter: 105 mm Thread pitch: 2.0 mm Thread direction: right‑hand Weight: 1.8 kg Special features No‑go (reject) thread plug gauge Right‑hand metric ISO fine thread Supplied with calibration certificate Hardened gauge steel construction Category: Gauges / Thread gauges SKU: M315.605.7 FAQ What is the primary purpose of this plug gauge? The NO‑GO plug is designed to identify and reject metric ISO fine threads outside the permitted limits; the Thread plug gauge NO‑GO M105 x 2.0 enforces the rejection boundary for quality control. Does the gauge meet an established standard? Yes, the gauge is manufactured to DIN 13, 6H, which defines the tolerance class for the inspected thread form. Is the product delivered with any documentation? The gauge is supplied with a calibration certificate, providing traceability and documented acceptance for the Metav IndustryLine thread plug. Can this gauge be used for left‑hand threads? This specific item is a right‑hand NO‑GO plug; left‑hand checks require the corresponding left‑hand gauge or a different SKU. What details identify this exact model? The item is listed under SKU M315.605.7 and the GTIN 4054469153186, both of which uniquely identify the Metav IndustryLine NO‑GO plug. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x2 Three-Point Go Thread Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of a hardened gauge steel construction combined with an inspection grade DIN 13, 6g tolerance to secure reliable pass/fail checks in series production; the tool is supplied with a traceable calibration certificate. Order the Go ring gauge directly via Metav Werkzeuge or consult the team for application advice. Go ring gauge M105 x 2.0 — hardened gauge steel, calibrated — Metav IndustryLine The Go ring gauge M105 x 2.0 is a right‑hand metric ISO fine‑thread inspection ring designed for rapid pass/fail assessment of externally threaded parts in production and incoming inspection. M105 x 2.0 metric fine-thread Go gauge Hardened gauge steel construction Supplied with calibration certificate DIN 13, tolerance 6g compliance Ensure conformity without guesswork A precision go ring gauge provides an unequivocal decision at the point of inspection: manufacture parts that pass the gauge and remain within the specified limits. The hardened gauge steel body and adherence to DIN 13, 6g mean the gauge is built to the tolerance band used for ISO fine threads, reducing ambiguity during quality checks. By using a dedicated ring for the nominal M105 x 2.0 size, repeatability is improved and process control is simplified, which lowers the risk of downstream rejection and rework in serial production. Robust design for repeated shopfloor use Designed for routine use, the ring is heat treated for wear resistance and dimensional stability, which translates into a longer service life under industrial conditions. The tool’s mass and construction give a secure handling feel while minimising the influence of incidental damage on the inspection outcome. As a clear physical master for acceptance, the gauge removes the need for complex measuring setups during go/no‑go checks and keeps inspection cycles fast and consistent. Traceability and QA integration for regulated workflows The ring is supplied with a calibration certificate, ensuring traceability and documented conformity for internal audits and supplier control. For organised inventory and digital records the item is listed with a GTIN and classification data, facilitating procurement and quality management systems. Choosing a calibrated gauge from an established supplier supports a defensible inspection regime and aligns with industry expectations for traceable measurement standards. For reliable thread inspection in production environments, choose the Metav IndustryLine Go ring gauge and contact Metav Werkzeuge for technical clarification or to arrange supply via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.705.7 GTIN: 4054469153568 ECLASS: 21170214 Customs tariff number: 90173000 Facts Nominal size: M105 x 2.0 Thread direction: Right‑hand Weight: 1.8 kg Standard: DIN 13, 6g Special features Material: Gauge steel, hardened Supplied with calibration certificate Go gauge (acceptance ring) for production checks Category: Inspection gauges / Thread gauges FAQ What is the intended use of this ring gauge? The Go ring gauge M105 x 2.0 is intended for pass/fail inspection of externally threaded parts manufactured to metric ISO fine‑thread specifications. Does the gauge come calibrated? Yes, the ring is supplied with a calibration certificate, providing documented traceability for quality records. Which tolerance class does the gauge conform to? The gauge conforms to DIN 13 with a 6g tolerance designation, suitable for ISO fine‑thread acceptance checks. Is this a go or no‑go gauge? This product is supplied as a Go (acceptance) ring gauge for the specified nominal thread size and direction. Can this ring gauge be used in harsh production environments? The hardened gauge steel construction improves wear resistance and dimensional stability for routine shopfloor inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x3 Go Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
High-precision verification combined with robust, hardened gauge steel and a delivered calibration certificate ensures reliable and repeatable thread checks; order the calibrated gauge directly via Metav Werkzeuge or contact our consultants for tailored inspection advice. Thread ring gauge GUT M105 x 3.0 — metric ISO fine thread, right-hand; hardened gauge steel, calibrated (Metav IndustryLine) The thread ring gauge GUT M105 x 3.0 is a precision right-hand gauge for verification of metric ISO fine threads in production and inspection environments. Calibrated with certificate Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Suitable for M105 x 3 fine threads Precision that delivers reproducible inspection results The calibrated ring is manufactured from hardened gauge steel, which maintains profile integrity and resists wear in routine use. Supplied with a calibration certificate, the gauge supports documented quality control and audit trails, making it suitable for incoming inspection and process monitoring. The adherence to DIN 13 and the specified 6g class ensures compatibility with common metric ISO fine-threaded components and reduces ambiguity during conformity checks. Designed for robust, repeatable performance on the shop floor A stable construction and decisive thread form mean fewer rechecks and less downtime during batch inspections. The compact, mass-stable design (weight: 1.8 kg) aids in handling and positioning while resisting distortion under normal use. By providing repeatable measurements and clear acceptance criteria, the gauge helps streamline production workflows and supports faster decision-making when assessing threaded parts. Traceability, documentation and practical application guidance Delivered with traceable calibration documentation, the ring gauge supports quality systems and supplier records. For practical use, the gauge is stipulated for M105 x 3.0 metric fine threads and is configured as a right-hand thread instrument. Where additional clarification on tolerance interpretation or integration into inspection plans is required, Metav’s technical advisors can assist with selection and process implementation to ensure the gauge meets specific inspection routines. For reliable, documented thread inspection choose Metav IndustryLine’s calibrated thread ring gauge and contact Metav Werkzeuge for technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.705.8 GTIN: 4054469154367 Tariff number: 90173000 Weight: 1.8 kg Facts Thread: M105 x 3.0 Tolerance class: 6g (DIN 13) Hand: right-hand thread Material: gauge steel, hardened Special features Delivered with calibration certificate Conforms to DIN 13 Brand: Metav IndustryLine FAQ What thread size does this gauge check? The gauge checks M105 x 3.0 metric ISO fine threads and is specified for right-hand thread verification. Is the ring gauge delivered with calibration documentation? Yes, the Thread ring gauge GUT M105 x 3.0 is supplied together with a calibration certificate for traceable inspection records. Which standard and tolerance class apply to this gauge? The instrument conforms to DIN 13 and is produced to the 6g tolerance class for metric ISO fine threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and stable thread profile retention under regular inspection use. Who to contact for technical questions or procurement? For detailed technical advice or to order the calibrated gauge, contact Metav Werkzeuge; they can advise on integration into inspection processes and documentation requirements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x3 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H With Calibration Certificate - Metav IndustryLine
Take advantage of a combination of precision, robust construction and an included calibration certificate for dependable thread inspection and reduced rework in production. Order the gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Thread plug gauge GUT M105x3 (right-hand) — Metav IndustryLine, hardened gauge steel, DIN 13 (6H) The thread plug gauge GUT M105x3 is a right‑hand metric ISO fine‑thread plug gauge designed for fast acceptance testing and routine quality control in machining and assembly environments Go plug gauge for quick pass/fail inspection Hardened gauge steel construction for long service life Conforms to DIN 13 (6H) for metric ISO fine threads Supplied with calibration certificate for traceability Ensure conformity with standardised thread checks The thread plug gauge provides an immediate, objective check against the M105x3 metric ISO fine‑thread specification. Manufactured to DIN 13 (6H), the gauge verifies the functional profile of internal threads and avoids ambiguous measurements that can result from subjective methods. Using a dedicated plug gauge accelerates inspection cycles and reduces the risk of part rejection further down the line, which supports a more efficient production flow and consistent quality control. Robust materials and workshop suitability for repetitive use A hardened, high‑grade gauge steel body delivers the rigidity and wear resistance needed for repeated use in industrial settings. The material choice and heat treatment maintain the thread form even after extended service, helping to keep tolerances stable and to lower lifetime replacement costs. The construction is particularly suitable for frequent, quick checks on incoming parts, in‑process checks and final inspection, where durability directly translates into lower downtime and fewer interruptions. Traceable calibration for audit‑ready quality assurance The gauge is supplied with a calibration certificate, ensuring measurement traceability and documentation for quality systems. This certificate supports internal audits and customer requirements, proving that the inspection tool itself meets documented accuracy standards. For production environments where process evidence is required, the delivered calibration documentation simplifies record keeping and strengthens confidence in measurement results. Contact Metav Werkzeuge in Emmerich for expert guidance on integrating this Metav IndustryLine gauge into existing inspection routines or for a tailored supply recommendation Technical data Article number: M315.505.8 SKU: M315.505.8 GTIN: 4054469153988 Weight: 1.8 kg Size: M105x3 Right‑hand thread Standard: DIN 13 (6H) Material: Gauge steel, hardened Supplied with calibration certificate Tariff number: 90173000 Facts Diameter / pitch: M105 × 3 Weight: 1.8 kg GTIN: 4054469153988 Tariff number: 90173000 Special features Type: Go (GUT) plug gauge Application: Thread inspection and acceptance testing Category: Thread gauges / Plug gauges Durable, hardened construction Delivered with calibration certificate for traceability FAQ What is the intended use of this plug gauge? The thread plug gauge GUT M105x3 is intended for pass/fail inspection of internal threads to verify conformity with metric ISO fine‑thread specifications in production and quality control. Does the gauge come calibrated? Yes, the Metav IndustryLine gauge is supplied with a calibration certificate, providing documented traceability for audit and process control purposes. Which thread tolerance does the gauge check? The gauge verifies threads to the DIN 13 tolerance class 6H for metric ISO fine threads, ensuring compatibility with standard mating parts. Is this a Go or No‑Go gauge? The product is a Go (GUT) plug gauge, designed to confirm that an internal thread meets the minimum functional profile. Can the gauge be used in workshop environments? Yes; the hardened gauge steel construction is designed for robust workshop and production use where repeated routine inspections are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x3 Thread Go/No-Go Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of fast, unambiguous thread inspection with a hardened gauge steel construction and an included calibration certificate. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice and rapid delivery. Thread plug gauge (no-go) M105×3.0 — metric ISO fine thread, right-hand — Metav IndustryLine The Thread plug gauge (No-Go) M105×3.0 is a dedicated reject gauge for checking M105×3.0 metric ISO fine threads in right‑hand form, designed for production and incoming‑inspection use No-go plug gauge for M105×3 metric fine threads Hardened gauge steel, DIN 13 tolerance 6H Delivered with calibration certificate Clear fail/pass control for threaded parts A dedicated no-go plug gauge provides an immediate, objective decision during thread inspection: if the no-go side enters the thread, the part is out of tolerance and must be rejected. This direct method reduces interpretation errors from visual checks and accelerates quality gates on the production line. By using a purpose-built thread checking tool in M105×3.0, shops cut cycle time for inspection and improve sorting reliability, making traceable acceptance criteria practical even under time pressure. Durable construction to withstand workshop use Manufactured from hardened gauge steel and engineered to the DIN 13 standard with 6H tolerance, the gauge resists wear and keeps its reference geometry over repeated use. The robust material and solid design ensure stable contact conditions during checks, preserving measurement integrity across shifts. A consistent mechanical reference like this plug gauge reduces rework and machine downtime because inspection variability is minimised by durable, repeatable contact surfaces. Calibration and traceability for audit-ready documentation The tool is supplied with a calibration certificate, making it suitable for documented quality systems and incoming inspection records. Calibrated gauges support audit trails and provide confidence when releasing or rejecting batches. Delivering traceable verification together with the gauge simplifies integration into existing quality management routines and avoids the delay of external calibration before first use. Practical integration into inspection workflows As a right‑hand thread check for metric ISO fine threads, this plug gauge fits standard thread inspection sequences in mechanical workshops and manufacturing QA departments. The simple go/no-go concept is straightforward to train shop-floor staff on and pairs well with visual inspection and dimensional sampling. Use the gauge at incoming inspection, at-line control or final inspection to enforce thread conformity without needing specialised measuring equipment. For a precise inspection solution from Metav IndustryLine and tailored delivery from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich for expert advice and order processing at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.605.8 GTIN: 4054469154176 Weight: 1.8 kg Material: Hardened gauge steel Norm: DIN 13, 6H Core specifications Thread size: M105×3.0 Thread type: Metric ISO fine thread Hand: Right-hand Tariff number: 90173000 Materials & special features Gauge function: No-go (reject) plug gauge Supplied with calibration certificate Category: Thread checking gauge FAQ What is the primary function of this plug gauge? The plug gauge serves as a no-go control to verify whether an M105×3.0 metric ISO fine thread falls outside the permissible limit; a no‑go entry indicates rejection. Does the gauge arrive calibrated? Yes, the gauge is supplied with a calibration certificate, so it is ready for documented inspection tasks on delivery. Which standard and tolerance does the gauge follow? The thread gauge is made to DIN 13 with a 6H tolerance class for metric ISO fine threads. What material is used for the gauge? The tool is manufactured from hardened gauge steel, chosen for durability and stable reference geometry. How should a failed no-go result be handled in production? A no‑go result indicates the thread exceeds allowable limits and should trigger part rejection or rework according to the facility’s quality plan; use the gauge as part of a documented control step. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x3 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Pass/Reject, DIN 13 6g, Calib. Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, DIN 13, 6g conformity and the included calibration certificate for reliable thread inspection; order the item directly via Metav Werkzeuge or ask our consultants for clarification. Thread ring gauge REJECT M105 x 3.0 — metric ISO fine thread, right-hand (Metav IndustryLine) A Thread ring gauge REJECT M105 x 3.0 for inspection of metric ISO fine external threads in a right‑hand configuration, intended for use in quality control and incoming inspection. M105 x 3, DIN 13 6g thread form Hardened gauge steel construction Delivered with calibration certificate Right‑hand metric ISO fine thread check Precision that supports consistent production The Thread ring gauge REJECT M105 x 3.0 is manufactured from hardened gauge steel, giving it the stiffness required for repeatable contact inspection of external threads. Conformity to DIN 13, 6g ensures the gauge matches the expected tolerance class for metric fine threads, reducing ambiguity during acceptance checks. The solid construction and defined thread form permit clear go / no‑go evaluation of component batches, which in turn reduces production variability and the risk of costly rework. Practical inspection workflow for the workshop Designed for straightforward use on the shop floor, the ring gauge offers a compact solution for verifying external threads where a fixed reference for fit is required. The right‑hand configuration and metric ISO designation make it directly applicable to common fine-pitch screw threads used in assemblies and housings. Supplied with a calibration certificate, the gauge supports traceable documentation of inspection results and assists compliance with internal quality procedures or customer audits. Fit for quality-focused procurement Although catalogued with the label "REJECT", the item is documented transparently and supplied with its calibration paperwork so that assessment of suitability is possible on receipt. For buyers seeking verified measuring tools, this ring gauge delivers clear dimensional reference and documented traceability. Choosing Metav IndustryLine products means access to a broad precision portfolio filtered through Metav’s quality control in Emmerich — a practical option for procurement teams who value documented conformity and dependable stock handling. Contact Metav Werkzeuge for availability and expert advice on this Metav IndustryLine thread ring gauge, including its calibration certificate and suitability for specific inspection tasks Technical Data Article number: M315.805.8 GTIN: 4054469154558 Weight: 1.8 kg Material: Gauge steel, hardened Size: M105 x 3 Facts Standard: DIN 13, 6g Tariff number: 90173000 ECLASS: 21170214 Special features Delivered with calibration certificate Right‑hand, metric ISO fine thread Catalogued with designation "AUSSCHUSS" (REJECT) Intended for external thread inspection FAQ What is the primary use of this ring gauge? The ring gauge is intended for inspection of external metric ISO fine threads, providing a fixed reference for dimensional conformity and fit checks in production and incoming inspection. Does this gauge come with calibration documentation? Yes, the item is supplied with a calibration certificate, enabling traceable inspection records and supporting quality audits. Which standard does the gauge comply with? The gauge is manufactured to DIN 13, 6g, matching the tolerance class for the specified metric fine thread form M105 x 3. Is the thread orientation suitable for left‑hand threads? This particular gauge is configured for right‑hand threads; left‑hand versions must be sourced separately. What does the "REJECT" or "AUSSCHUSS" designation mean in the catalogue? The designation indicates the catalogue listing; the gauge is described transparently and supplied with calibration paperwork so that suitability can be assessed on receipt. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x4 Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of robust, hardened gauge steel construction and DIN‑specified tolerance for fast, repeatable thread inspection; the tool is supplied with a calibration certificate for traceable quality assurance. Order the Go thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Go thread plug gauge M105 x 4.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Go thread plug gauge M105 x 4.0 is a right‑hand plug gauge designed for rapid verification of metric ISO fine threads in production and incoming inspection, providing a compact, reliable means of pass/fail assessment on medium and large assemblies. Hardened gauge steel DIN 13 tolerance 6H Metric ISO fine thread M105 x 4 Calibration certificate included Rapid, reliable thread acceptance to speed up quality control The primary function of this gauge is to deliver a quick, unequivocal acceptance check for fine metric threads. As a Go plug gauge for metric ISO fine thread M105 x 4, it confirms whether an internal thread meets the maximum material condition and assembly requirements. That straight‑forward pass/fail result reduces inspection time on the shop floor and supports consistent process control, which in turn lowers rework rates and keeps production moving. Durable design that withstands routine use Constructed from hardened gauge steel, the gauge is built for repeated engagement without rapid wear, providing stable dimensional behaviour across many cycles. Manufactured to DIN 13 with tolerance class 6H, the tool ensures compatibility with standardised mating parts and repeatability in routine checks. The solid build and mass (approx. 1.8 kg) aid handling stability during inspection, contributing to reproducible results in workshop and quality‑control environments. Traceable calibration for audit‑ready documentation The delivery includes a calibration certificate, documenting that the gauge was checked and is supplied with traceable verification — a valuable asset for quality systems and audit trails. This supporting paperwork simplifies record keeping and helps meet customer or internal quality requirements by proving that the inspection tool itself has been validated prior to use. Practical application across production and inspection stations Ideal for use where reliable go/no‑go decisions are needed quickly, the plug gauge suits production testing, incoming goods checks and routine maintenance inspections of assemblies with metric fine threads. Marked as a Go (GUT) gauge and configured for right‑hand threads, it is particularly useful in environments where rapid throughput and reliable conformity to standards are priorities. For special setups or technical clarifications, Metav’s product information and warehouse presence in Emmerich provide an accessible quality filter for the European market. Choose the Metav IndustryLine Go thread plug gauge for robust, standard‑conforming thread checks — contact Metav Werkzeuge in Emmerich for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.505.9 GTIN: 4054469154749 Mass/Size: M105 x 4 Material: Gauge steel, hardened Standard: DIN 13, 6H Weight: 1.8 kg Tariff number: 90173000 Facts Type: Go (GUT) plug gauge Thread hand: Right‑hand Category path: Messstifte; Lehren Special features Calibration certificate included Suitable for metric ISO fine threads Robust construction for workshop use FAQ What is the intended use of this plug gauge? The plug gauge is intended for rapid pass/fail verification of internal metric ISO fine threads; the Go thread plug gauge M105 x 4.0 confirms whether a thread meets the acceptance limit defined by DIN 13, 6H. Does the gauge come with a calibration document? Yes, the gauge is supplied with a calibration certificate that documents the inspection of the tool prior to delivery for traceable quality records. Is this a Go or No‑Go gauge? This item is supplied as a Go (GUT) plug gauge for right‑hand threads and is used to verify that internal threads are within the maximum material condition for acceptance. Which materials and applications is the gauge designed for? The gauge is a measuring implement for thread inspection and is used across production, incoming inspection and assembly operations where metric ISO fine threads require standardised verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x4 Thread Go/No-Go Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H With Calibration Certificate - Metav IndustryLine
Take advantage of the combination of precision, robust hardened gauge steel construction and an included calibration certificate for reliable thread inspection; order the gauge directly via Metav Werkzeuge or contact our consultants for technical advice. Thread plug gauge No‑go M105 x 4.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug gauge No‑go M105 x 4.0 is a hardened, right‑hand plug gauge for verifying metric ISO fine internal threads in production and incoming inspection. Hardened gauge steel, precision ground Calibrated with certificate included Conforms to DIN 13, tolerance 6H Right‑hand metric M105 x 4.0 thread Maintain production quality with measurable pass/fail control A dedicated no‑go thread plug provides an unambiguous, repeatable check during in‑process control and final inspection. The M105 x 4.0 size and DIN 13 / 6H tolerance are matched to ISO metric fine‑thread specifications, so the gauge serves as a direct, tactile indicator of whether an internal thread falls within acceptable limits. By using a hard, wear‑resistant standard for rejection detection, shopfloor decisions become faster and measurement variability is reduced, supporting consistent output and fewer rework cycles. Built for durability and repeatable accuracy Made from hardened gauge steel and finished by precision grinding, the gauge resists wear in continuous use and preserves functional geometry over time. The robust construction supports repeated engagement with workpieces without rapid degradation of the critical measuring surfaces, which maintains traceability of inspection results and reduces the frequency of replacements. The overall mass of 1.8 kg gives a reassuring handling feel while indicating a solid, professional‑grade tool. Traceable calibration to support quality systems Delivered with a calibration certificate, the gauge offers documented conformity for audit and quality assurance processes. Calibration provides measured evidence that the reject criterion is set to the specified limits; this is essential for traceable quality control and for integration into documented inspection procedures. For users operating a structured quality system, the supplied certificate eases documentation and supports reproducible acceptance criteria on the shopfloor. Practical use in workshop and incoming inspection Designed as a straightforward, functional inspection device, the plug gauge is intended for quick go/no‑go checks on internal threads in assemblies, components and turned parts. As a dedicated no‑go instrument, it eliminates the need for time‑consuming dimensional measurement when a simple conformity decision is required, thereby improving throughput. The right‑hand thread orientation matches common production threads, enabling direct application without adaptations or conversions in most machining environments. For reliable rejection control in thread production, choose the Metav IndustryLine calibrated M105 x 4.0 no‑go plug gauge — contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.605.9 GTIN: 4054469154923 Material: Gauge steel, hardened Standard: DIN 13, 6H Facts Thread size: M105 x 4.0 Function: No‑go (reject) plug gauge Handedness: Right‑hand Weight: 1.8 kg Tariff code: 90173000 Features Precision ground measuring surfaces Designed for metric ISO fine threads Supplied with calibration certificate Category: Thread plug gauge / Gauge FAQ What is the primary purpose of this plug gauge? The plug gauge is intended as a dedicated no‑go inspection tool for rejecting internal metric ISO fine threads; the Metav IndustryLine gauge M105 x 4.0 provides a clear pass/fail criterion during production and incoming inspection. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate, providing documented verification of its rejection geometry for traceable quality control. Which standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 with a tolerance designation of 6H, matching the specified metric ISO thread class for fine threads. Can the gauge be used on both left‑ and right‑hand threads? This item is a right‑hand plug gauge for M105 x 4.0 metric ISO fine threads; left‑hand variants are a different tool and should be selected where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x4 Thread Go/No-Go Ring Gauge Metric ISO Fine Right-Hand Hardened Gauge, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of robust, standardised gauging with a hardened gauge-steel construction and conformity to DIN 13, 6g for reliable production control; the unit is supplied with a calibration certificate and can be ordered directly from Metav Werkzeuge or discussed with our application consultants. Reject thread ring gauge M105 x 4.0 — Right-hand metric ISO fine-thread gauge (Metav IndustryLine) The Reject thread ring gauge M105 x 4.0 is a right-hand metric ISO fine-thread ring gauge designed for go/no-go inspection in production and incoming quality control of fine-threaded components Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Supplied with calibration certificate Right-hand metric thread M105×4 Accurate go/no-go control for fine-thread production A dedicated reject (no-go) ring gauge provides an unequivocal pass/fail result for threads, eliminating subjective judgement on the shop floor. Built to DIN 13 with tolerance class 6g, this gauge defines the limit condition for a metric fine thread and supports consistent go/no-go testing in serial production. The clearly defined limit ensures faster inspection cycles and reduces the risk of non‑conforming components entering assembly, which in turn minimises costly rework and warranty exposure. The supplied calibration certificate documents the acceptance state at delivery and supports traceability in quality records. Durable design that withstands repetitive handling Manufactured from hardened gauge steel, the ring gauge resists wear and maintains defined limits over extended use, preserving measurement reliability on the shop floor. The robust construction and the compact geometry of the ring make it suitable for repeated manual checks and integration into handheld inspection routines. With a mass of 1.8 kg, the gauge has sufficient bulk for stable handling while remaining manageable for routine use. This durability translates into predictable maintenance intervals and helps keep inspection costs low over the tool’s service life. Practical fit for inspection workflows and documentation The ring gauge is tailored for metric ISO fine-thread checks, specifically M105 x 4.0 right-hand threads, making it appropriate for mechanical components, fasteners and specialised assemblies that demand fine-pitch conformity. As the tool is delivered with a calibration certificate, quality departments gain immediate documentation for traceability and audit purposes. The fixed-limit concept simplifies operator training: the presence or absence of fit provides a rapid decision criterion compatible with statistical process control and routine incoming inspection protocols. A partner-quality choice from Metav IndustryLine Choosing a Metav IndustryLine gauge brings the assurance of a focused quality filter based in Emmerich: decades of distribution experience, centralised stock and strict quality checks ensure consistent product standards for workshops and industry alike. The combination of standard compliance, hardened construction and documented calibration supports reliable quality control while reflecting Metav’s mission to make high precision accessible and dependable for industry and trade. Order or request technical clarification for Metav IndustryLine gauging from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for advice and secure supply. Technical data Article number: M315.805.9 GTIN: 4054469155289 ECLASS: 21170214 Facts Size: M105 x 4.0 Mass: 1.8 kg Tariff number: 90173000 Special features Material: hardened gauge steel Thread: right-hand, metric ISO fine thread Standard: DIN 13, tolerance class 6g Supplied with calibration certificate Reject (no-go) ring gauge FAQ What is the purpose of a reject or no-go ring gauge? A reject (no-go) ring gauge checks the upper limit of a thread; if the no-go does not fit, the thread is within acceptable maximum material limits—this ring gauge M105 x 4.0 performs that check for metric ISO fine threads. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate that documents its measured condition at delivery and supports traceability in quality systems. Which thread standard does the gauge conform to? The tool conforms to DIN 13 with tolerance class 6g, which is the specification for metric ISO fine threads covered by this ring gauge. Can this gauge be used in production inspection or only for spot checks? The robust construction and clear go/no-go function make the gauge suitable both for spot checks and repeated production-line inspection routines. What material is the gauge made from and why does it matter? The ring gauge is made from hardened gauge steel, chosen for wear resistance and long-term stability of the defined limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x6 Thread Gauge Go Right-Hand For Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel, the DIN 13 (6H) tolerance and an included calibration certificate to ensure fast, reproducible acceptance tests on metric fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists if further advice is required. Thread plug gauge M105 x 6 (right-hand) — hardened gauge steel, DIN 13 (6H) The Thread plug gauge M105 x 6 is a right-hand, metric ISO fine-thread plug gauge designed for fast Go acceptance checks in workshop and production quality control. Hardened gauge steel construction DIN 13 tolerance 6H Calibration certificate included Fast, reliable acceptance testing for threaded production The plug gauge performs unequivocal Go checks on internal threads, reducing inspection time and avoiding ambiguous decisions. Made as a Go gauge for the M105 x 6 metric fine thread and produced to DIN 13 (6H), the device provides a clear pass condition that supports process stability and reduces rework rates. The simple mechanical nature of the tool makes it suitable for shop-floor use where speed and repeatability are essential. Traceable calibration for audit-ready quality control Delivered with a calibration certificate, the gauge documents inspection capability and traceability for internal records or external audits. The certificate confirms that the gauge has been measured and recorded at delivery, offering confidence when the tool is used for final acceptance. This traceability supports conformity assessments and strengthens supplier evidence in regulated procurement chains. Robust construction for long service life in industrial environments Manufactured from hardened gauge steel, the plug gauge combines wear resistance with dimensional stability for frequent use. The robust material and hardened finish maintain the functional geometry of the thread profile under repeated engagement, extending service intervals and reducing the need for replacement. The physical design suits routine in-line checks during production and incoming quality control. Seamless integration into inspection routines and documentation The gauge’s clear designation and industry-standard thread form allow straightforward integration into existing inspection plans and quality documentation. With the M105 x 6 size and right-hand orientation recorded on the tool and accompanying paperwork, traceability and tool control are simplified. The compact, single-purpose nature of the gauge accelerates decisions on accept/reject criteria, supporting efficient shop-floor workflows. Choose Metav IndustryLine thread gauges from Metav Werkzeuge for a practical, traceable solution to threaded component inspection — contact Metav Werkzeuge for individual guidance and ordering support. Technical data Article number: M315.505.A GTIN: 4054469155463 Weight: 2 kg Thread size: M105 x 6 Orientation: Right-hand Material: Gauge steel, hardened Standard: DIN 13, 6H Customs tariff number: 90173000 Calibration certificate: included Facts eClass: 21170228 Categories: Messstifte; Lehren SKU: M315.505.A Special features Go gauge for metric ISO fine thread Right-hand thread form Hardened gauge steel construction DIN 13 tolerance 6H Supplied with calibration certificate FAQ What does a Go plug gauge indicate for thread inspection? A Go plug gauge confirms that an internal thread meets the minimum dimensional requirements; the Thread plug gauge M105 x 6 registers a pass when it properly engages the thread, indicating compliance with the specified DIN 13 (6H) limits. Is a calibration certificate supplied with the gauge? Yes — the gauge is delivered with a calibration certificate that documents measurement and traceability at the time of delivery for the Metav IndustryLine thread plug gauge M105 x 6 (SKU M315.505.A). Which applications suit this plug gauge? The gauge is intended for acceptance testing of right-hand metric fine threads in workshop, production and incoming inspection where quick Go checks on M105 x 6 threads are required. What material is used for the gauge and why does it matter? The tool is made of hardened gauge steel, offering wear resistance and dimensional stability for repeated use, which preserves the thread profile and maintains reliable inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com