Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M105x6 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge steel construction, DIN 13 tolerance class 6g and an included calibration certificate, this Go ring provides dependable, repeatable thread acceptance for production and incoming inspection; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice Thread ring gauge GUT M105 x 6.0 — Go gauge for metric ISO fine thread, DIN 13, 6g (Metav IndustryLine) The Thread ring gauge GUT M105 x 6.0 is a right-hand Go ring designed for precise acceptance checks of metric ISO fine threads with a major diameter of 105 mm and a pitch of 6.0 mm Go ring gauge to DIN 13, tolerance class 6g Hardened gauge steel construction Supplied with calibration certificate For right-hand metric fine threads M105 x 6 Reliable conformity control for fine-thread series The ring serves as a decisive, objective tool for thread acceptance: by offering a clear Go result it reduces ambiguous assessments on the shop floor. Built to the DIN 13 specification with tolerance class 6g, the instrument supports standardised inspection routines and helps prevent rejected parts due to undetected thread deviations. The straightforward Go/No‑Go principle accelerates quality control and minimises production interruptions by providing an immediate pass criterion for threaded components. Robust construction that withstands repeated use Manufactured from hardened gauge steel, the ring is engineered for dimensional stability and long service life under regular handling. The hardened material resists wear at the functional flanks, so the M105 x 6 profile remains consistent across many inspection cycles. That stiffness and surface integrity ensure repeatable results and lower the need for frequent replacements, which benefits throughput and reduces total cost of ownership in serial production environments. Traceable calibration for accountable inspection Delivered with a calibration certificate, the gauge arrives ready for documented use in formal inspection processes; traceability to the calibration event supports quality records and audits. The certificate confirms the gauge meets the specified acceptance limits for a Go ring and establishes a baseline for future checks. With its clear conformity role and certified status, the ring is well suited for incoming goods inspection, batch release and routine shop‑floor verification where accountable measurement evidence is required. For certified thread inspection and reliable quality assurance, contact Metav Werkzeuge for ordering and technical consultation — Metav IndustryLine stock and expert advice are available from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M315.705.A GTIN: 4054469155722 Tariff number: 90173000 Weight: 2 kg Material: hardened gauge steel Standard: DIN 13 Core measurements Thread size: M105 x 6.0 Pitch: 6.0 mm Diameter (major): 105 mm Tolerance class: 6g Gauge type: Go (GUT) Direction: right-hand Materials & special features Hardened gauge steel construction Supplied with calibration certificate Intended for metric ISO fine threads Suitable for production and incoming inspection FAQ What does the 'GUT' designation mean for this ring gauge? The GUT marking indicates a Go ring gauge; it is designed to accept parts that meet the nominal thread geometry for M105 x 6 according to the specified tolerance class. Is a calibration certificate included with the gauge? Yes, the thread ring gauge GUT M105 x 6.0 is supplied with a calibration certificate that documents the inspection status at delivery. For which applications is this ring gauge intended? The gauge is intended for production inspection, incoming goods checks and batch release of right‑hand metric ISO fine threads where a Go acceptance criterion is required. What material is the gauge made from and why is that important? The ring is made from hardened gauge steel, which ensures wear resistance and dimensional stability so results remain repeatable through extended use. Does the gauge conform to a recognised standard? Yes, the gauge is manufactured to DIN 13 with tolerance class 6g, matching standard requirements for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105x6 Thread Go/No-Go Ring Gauge Metric ISO Fine Thread Right-Hand Calibrated, DIN 13 6g - Metav IndustryLine
Reliable thread inspection for metric fine threads is achieved through the combination of hardened gauge steel, conformity with DIN 13 (6g) and the supplied calibration certificate, ensuring consistent pass/fail decisions and reduced scrap. Order the gauge directly via Metav Werkzeuge or consult their specialists for application-specific advice. Thread ring gauge No‑Go M105 x 6.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread ring gauge No‑Go M105 x 6.0 intended for quick pass/fail inspection of metric ISO fine-threaded components in production and quality control No‑go ring gauge M105 x 6.0, right‑hand Hardened gauge steel for durability Supplied with calibration certificate Fast, unambiguous pass/fail thread inspection The no‑go ring gauge is designed to give an immediate, binary assessment of thread conformity for metric ISO fine threads. By checking whether an external thread enters the ring, the gauge simplifies inspection to a clear pass or reject decision, avoiding time‑consuming measurements for every part. The M105 x 6.0 size targets large fine‑thread applications often found in heavy machinery and assemblies; using a dedicated no‑go ring reduces rework, shortens inspection cycles and supports consistent quality control across shifts and operators. Robust construction for repeatable results on the shop floor Manufactured from hardened gauge steel, the ring maintains its dimensional stability under frequent use and resists wear that would otherwise compromise repeatability. The compact, solid design gives good handling and a reliable seating on the thread during verification; this results in reproducible checking without elaborate fixtures. Where repeatability matters for production throughput, the physical durability of the gauge translates directly into lower measurement uncertainty and fewer disputed inspections. Traceable calibration and standard conformity for audit readiness A calibration certificate is supplied with the gauge, documenting the inspection status at delivery and supporting traceability in quality records. Conformity with DIN 13, 6g specifies the thread form and tolerance class used for the reference, enabling straightforward interpretation of inspection outcomes in line with common industrial practice. For procurement and quality departments this means the inspection tool is ready for immediate integration into existing control plans and audit trails, reducing administrative overhead and increasing confidence in acceptance decisions. Contact Metav Werkzeuge to arrange supply of the Metav IndustryLine M105 x 6.0 no‑go ring gauge and to receive application guidance from our quality specialists Technical Data SKU: M315.805.A GTIN: 4054469155852 Weight: 2 kg Thread size: M105 x 6.0 Right‑hand thread Specifications Standard: DIN 13, 6g Tariff code: 90173000 Features / Applications Material: hardened gauge steel Supplied with calibration certificate Category: gauges / thread inspection Function: no‑go (reject) ring gauge Suitable for metric ISO fine threads FAQ What is the primary function of this gauge? The ring serves as a no‑go (reject) gauge for metric ISO fine threads, instantly indicating whether an external thread exceeds the acceptable maximum form or size. Is a calibration certificate included with the gauge? Yes, the Metav IndustryLine M105 x 6.0 no‑go ring gauge is supplied with a calibration certificate that documents its measured condition at delivery. Which thread standard does the gauge reference? Inspection is carried out against DIN 13, 6g, the specified form and tolerance class for this gauge size and application. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure long service life and repeatable inspection results. For which applications is the M105 x 6.0 size typically used? This size is suitable for large fine‑thread components in heavy assemblies, fixtures and mechanical joints where metric ISO fine threads are specified. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105×1.5 Thread Go Plug Gauge Metric Fine Pitch Right-Hand Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of precision compliance and robust construction for reliable thread inspection and consistent production quality; the hardened gauge steel and DIN 13 tolerance class ensure repeatable acceptance checks. Order the thread plug gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge GO M105 x 1.5 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge GO M105 x 1.5 is a precision go gauge designed for quick go/no-go acceptance checks of internal metric ISO fine threads in production and inspection environments. Go gauge for M105×1.5 metric fine thread Hardened gauge steel, ready for shop floor use Conforms to DIN 13, tolerance class 6H Supplied with calibration certificate Accurate acceptance testing that prevents assembly errors The Go gauge principle provides a straightforward, rational means of verifying that an internal thread meets specified limits. The M105 x 1.5 size targets metric ISO fine threads commonly found in heavy‑duty fastenings and mechanical assemblies; the gauge checks that threads allow assembly (go) within the DIN 13 tolerance band for class 6H. Because the tool tests the functional fit rather than abstract dimensions alone, inspectors obtain immediate pass/fail results that reduce ambiguity and speed decision‑making on the shop floor. This tangible outcome supports defect avoidance and lowers rework rates. Durable construction for reproducible measurements under production conditions Manufactured from hardened gauge steel, the mandrel is ground to maintain thread form and resist wear during repeated use. The robust material and finish ensure dimensional stability and consistent contact geometry, which in turn preserves measurement repeatability over many cycles. These mechanical qualities translate into fewer gauge replacements and stable inspection results over time, improving production uptime and maintaining traceability of acceptance checks in a busy workshop environment. Traceable calibration and straightforward integration into inspection routines The gauge is delivered supplied with a calibration certificate, providing documented evidence of conformity at delivery and enabling immediate use in quality systems. As a simple, tactile inspection tool, it integrates into routine incoming inspection, in‑process checks and final assembly verification without complex interfaces or data acquisition. For companies seeking clear conformity evidence and a compact test method, this approach balances minimal handling with assured functional verification. Contact Metav Werkzeuge for tailored advice on using the M105 x 1.5 go gauge in production or to arrange prompt supply from stock; telephone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M315.505.6 GTIN: 4054469152011 Weight: 1.8 kg Thread size: M105 x 1.5 Material: gauge steel, hardened Facts Standard: DIN 13, tolerance class 6H Tariff number: 90173000 Direction: right-hand Special features Go (GUT) plug gauge for internal threads Supplied with calibration certificate Suitable for production and inspection workflows Category: Thread plug gauges / Gauges FAQ What does the 'GO' designation mean for this gauge? The GO designation indicates this is a go plug gauge that verifies whether an internal thread accepts a mating fastener within the permitted tolerance; the Thread plug gauge GO M105 x 1.5 is used to confirm functional fit. Is the gauge ready for immediate use on delivery? Yes, the gauge is delivered supplied with a calibration certificate, so it may be put into inspection routines with documented conformity upon receipt. Which tolerance class does this plug gauge check to? This gauge checks threads to DIN 13, tolerance class 6H, the standard fit for metric ISO fine threads in many mechanical applications. Can this gauge be used for left‑hand threads? No, this specific item is a right‑hand thread plug gauge; left‑hand variants must be ordered separately. What maintenance is recommended to prolong gauge life? Keep the gauge clean and lightly oiled when stored, avoid impacts on the thread form and return it for recalibration according to the quality system schedule; the hardened construction helps resist wear during normal use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105×4 Thread Ring Gauge Metric ISO Fine Thread 6g, Hardened Gauge Steel, Calib. Certificate - Metav IndustryLine
Precision verification with a hardened gauge-steel GO ring in size M105×4 and compliance with DIN 13 6g provides repeatable acceptance checks; a calibration certificate is supplied for traceable results. Order the gauge directly via Metav Werkzeuge or ask our consultants for application advice. Go ring gauge M105×4 — Ring gauge for metric ISO fine thread, DIN 13 6g (Metav IndustryLine) The Go ring gauge M105×4 is a precision inspection ring gauge intended for routine verification of metric ISO fine threads in production control and incoming goods inspection. Includes calibration certificate Hardened gauge steel for durability Conforms to DIN 13 tolerance 6g For metric ISO fine thread M105×4 (right-hand) Consistent production checks that reduce rework and downtime The GO ring is engineered for rapid, reliable thread verification, turning a subjective visual check into a reproducible acceptance test. Machined and hardened from gauge steel, the ring keeps its functional geometry under shop-floor conditions, so thread runs can be checked in seconds. With the DIN 13 6g tolerance stamped into the manufacturing process, inspection protocols become easier to enforce and audits are simplified. The immediate benefit is a lower reject rate and a shorter feedback loop between quality control and production, which translates into measurable time savings on repetitive checks. Traceable calibration for audit-ready quality control A supplied calibration certificate documents the ring’s conformance at the point of delivery, providing traceability for internal quality records and external audits. This documentation supports networked quality systems and is especially useful where documented measurement evidence is required for supplier acceptance or compliance processes. The ring’s GTIN and article identification are recorded for logistics and inventory control, enabling straightforward traceability from warehouse receipt to shop-floor use while maintaining the proven inspection standard. Robust design for everyday metrology tasks Manufactured from hardened gauge steel and finished for stable contact, the ring is intended for repetitive use in industrial environments; the right-hand metric thread geometry corresponds to standard fastening practices. Marked as a GO gauge (GUT), it serves as the acceptance limit for threaded parts and is therefore central to first-off checks, batch sampling and incoming inspection routines. Weighing approximately 1.8 kg, the gauge balances solidity with manageable handling at the inspection station, and its durable construction minimises the need for frequent replacement—delivering long-term operational reliability and lower total cost of ownership for the inspection process. Contact Metav Werkzeuge to obtain the Metav IndustryLine Go ring gauge M105×4 with its calibration certificate and to discuss suitability for specific production or inspection workflows. Technical data Article number: M315.705.9 SKU: M315.705.9 GTIN: 4054469155104 Customs tariff number: 90173000 Weight: 1.8 kg Facts Thread size: M105×4 Tolerance class: 6g (DIN 13) Right-hand thread Category: Gauges / Ring gauge Special features Material: hardened gauge steel Includes calibration certificate Type: GO ring gauge (GUT) Norm reference: DIN 13 FAQ What is the intended application of this ring gauge? The Go ring gauge M105×4 is designed for routine verification of metric ISO fine threads in production control, incoming inspection and sample testing. Does the gauge come with calibration documentation? Yes, the gauge is delivered with a calibration certificate documenting its condition at delivery and supporting traceability in quality records. Which tolerance and standard does the gauge follow? The ring is manufactured to DIN 13 with a tolerance class of 6g, suitable for standard metric ISO fine-thread acceptance checks. Is the gauge suitable for high-use shop-floor environments? Constructed from hardened gauge steel and weighing approximately 1.8 kg, the gauge is robust enough for frequent use while remaining practical to handle at the inspection station. How is the item identified for logistics and traceability? The item is listed with GTIN 4054469155104 and article number M315.705.9 for inventory and traceability purposes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M105×6 Thread Plug Gauge Go/No-Go Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calib. Certificate - Metav IndustryLine
Take advantage of a No‑Go thread plug gauge that combines hardened gauge steel, compliance with DIN 13 (6H) and a supplied calibration certificate to keep thread production strictly under control—order directly via Metav Werkzeuge or consult the technical team for application support. Thread Plug Gauge M 105 x 6.0 (No‑Go), right‑hand — Metav IndustryLine Thread Plug Gauge M 105 x 6.0 (No‑Go) for right‑hand metric ISO fine threads, designed for production inspection and rapid reject detection Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6H Supplied with calibration certificate No‑go design for right‑hand metric fine threads Ensure rejects are identified before assembly The No‑Go function addresses the primary production risk: threaded parts that fall outside tolerance and can cause assembly failure. Built for fast, repeatable checks, this thread gauge verifies whether an internal thread exceeds the upper tolerance limit. The M105 x 6.0 sizing follows the metric ISO fine‑thread profile, and the tool is manufactured to DIN 13 with tolerance class 6H, making it suitable for in‑line quality control where adherence to standards is required. This rational inspection step prevents downstream rework and supports predictable process yields. Robust materials for frequent inspection cycles Constructed from hardened gauge steel, the plug gauge resists wear during continuous use and preserves the reference profile over time. The hardened material and precision grinding reduce the need for frequent replacement, which lowers total cost of ownership in busy inspection bays. The compact, solid design and a mass of 2 kg provide stable handling during tactile checks, ensuring consistent contact and repeatable results across many cycles. Traceable calibration to support audit requirements A calibration certificate is supplied with the gauge, documenting its measured conformity at delivery and enabling traceability for quality management systems. This paperwork supports internal audits and supplier quality records by demonstrating that the inspection tool met defined acceptance criteria at the time of issue. For organisations that maintain strict inspection records, the documented status of the gauge simplifies incoming inspection and audit trails. Simple use and practical handling in workshop routines The plug gauge is intended for quick go/no‑go checks: the No‑Go end must not engage a correct thread, signalling rejection when it does. The right‑hand profile follows standard assembly orientation, which reduces the chance of operator error during routine checks. Maintenance is straightforward — keep the gauge clean, lightly oiled and stored in a protected location to retain the calibrated state. For serial inspection, marking the inspection station and integrating the gauge into existing checklists streamlines the control loop and reduces throughput interruptions. For reliable thread acceptance control, request the Metav IndustryLine M 105 x 6.0 no‑go plug gauge from Metav Werkzeuge—technical advice and procurement assistance are available from Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.605.A GTIN: 4054469155593 Tariff code: 90173000 Mass: M105 x 6.0 (right‑hand) Weight: 2 kg Facts Thread diameter: M105 Pitch: 6.0 mm Tolerance class: 6H Right‑hand thread Materials & special features Material: hardened gauge steel Function: No‑Go (reject) plug gauge Standard: DIN 13, 6H Supplied with calibration certificate Category: gauges / plug gauges FAQ What does the No‑Go function indicate? The No‑Go end of the plug gauge shows whether an internal thread exceeds the maximum acceptable limit; engagement indicates a reject condition for the inspected part. Is a calibration certificate included with the gauge? Yes, the Metav IndustryLine plug gauge is supplied with a calibration certificate documenting its measured conformity at delivery. Which thread standard does this gauge follow? Manufactured to DIN 13 with tolerance class 6H, the gauge matches the metric ISO fine‑thread form for reliable acceptance checks. Can this gauge be used for left‑hand threads? This specific item is a right‑hand No‑Go plug gauge designed for right‑hand metric threads; left‑hand applications require the corresponding left‑hand gauge. How should the gauge be maintained to preserve accuracy? Keep the gauge clean, protected from corrosion with light oil, and stored in a secure case or box to maintain calibration and dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x0.5 Go Thread Gauge Right-Hand Metric ISO Fine Thread DIN 13, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread inspection and durable construction to speed up quality checks and reduce rejects. The combination of metric ISO compatibility, DIN 13 tolerance class 6g and hardened gauge steel ensures reliable mating checks for fine threads; order directly via Metav Werkzeuge or request technical advice from our consultants. Thread Ring Gauge M10 x 0.5 — Hardened Gauge Steel, Right‑hand (Metav IndustryLine) The Thread Ring Gauge M10 x 0.5 is a compact inspection gauge for verifying metric ISO fine threads in production and incoming‑goods inspections, designed for repeatable, shop‑floor use. Metric ISO fine thread M10 × 0.5 DIN 13 tolerance class 6g Hardened gauge steel construction Right‑hand thread, compact 0.04 kg Reliable conformity checks that cut inspection time The M10 x 0.5 ring gauge is manufactured to DIN 13 with tolerance class 6g, enabling fast Go/No‑Go verification of machined or purchased threaded parts. By providing a clear, binary check against a defined tolerance class, the gauge reduces ambiguity in acceptance decisions and shortens inspection loops. In practice this translates into fewer measurement setups, lower throughput time for quality control and more consistent batch releases, which is particularly relevant in metalworking shops and assembly lines handling fine‑pitch metric threads. Robust material and compact handling for long service life Constructed from hardened gauge steel, the ring is built to resist wear under repeated engagements, maintaining dimensional stability over time and thus preserving measurement integrity. At only 0.04 kg, the device is easy to handle at the bench yet stiff enough for reliable seating on the threaded sample. The durable material and compact form mean fewer replacements and predictable lifetime costs for the inspection toolkit, supporting continuous production runs without frequent gauge changeovers. Practical use cases and workshop integration The ring gauge is tailored to users performing routine thread inspection on fasteners, components and assemblies with fine metric threads. Typical applications include incoming inspection of suppliers’ parts, in‑process checks during turning or milling operations, and final inspection before assembly. The straightforward design avoids the need for complex measuring equipment when a simple conformity test is required, making it a time‑efficient choice for quality engineers and shop floor inspectors who prioritise reproducible pass/fail results. Contact Metav Werkzeuge for product availability and application guidance on Metav IndustryLine gauges — expert advice from Emmerich is only a call or e‑mail away Technical data Article number: M315.210.2 GTIN: 4054469125596 Category: Gauges (Lehren) Facts Thread size: M10 × 0.5 Weight: 0.04 kg Standard: DIN 13, 6g Tariff code: 90173000 Special features Material: hardened gauge steel Thread direction: right‑hand Intended for metric ISO fine threads Compact, shop‑floor friendly design FAQ What tolerance does the gauge check to? The ring gauge verifies conformity to DIN 13 with tolerance class 6g, suitable for standard metric ISO fine thread acceptance. Is this suitable for M10 × 0.5 fine threads? Yes. The Thread Ring Gauge M10 x 0.5 is specifically made for metric ISO fine threads with that pitch and is intended for quick go/no‑go checks. What is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, offering high wear resistance and stable performance under repeated use in production environments. Can the gauge be used on left‑hand threads? No. This item is manufactured for right‑hand threads and will not correctly verify left‑hand thread forms. Which applications suit this gauge best? Typical uses include incoming inspection, in‑process checks during turning/milling and final assembly inspection where a fast, reproducible pass/fail decision is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x0.5 Limit Thread Go Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Product data conflict detected: the fields "ausschuss" and "gut" are contradictory (both set to true). This issue arises when two mutually exclusive attributes are simultaneously marked as true, creating a logical inconsistency in the product data. Such conflicts prevent the system from accurately processing and generating a valid product description. To resolve this, please review the product data thoroughly and ensure that only one of these fields is set to true, depending on the actual condition or status of the product. Correcting this discrepancy will enable the system to proceed with generating a suitable and accurate description.
M10x0.5 Thread Ring Go, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g - Metav IndustryLine
A hardened, DIN‑rated ring gauge for reliable inspection of metric fine threads, combining DIN 13 tolerance class and gauge steel construction for consistent pass/fail assessment. Order directly via Metav Werkzeuge or contact our consultants for application advice. Thread ring gauge M10 x 0.5 mm (Go) — hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread ring gauge M10 x 0.5 mm (Go) is a hardened acceptance gauge for verifying metric ISO fine internal threads in production and quality control settings. DIN 13 tolerance class 6g Hardened gauge steel for long service life Intended for M10 x 0.5 metric fine threads Fast, reproducible acceptance testing on the shop floor A dedicated go ring gauge designed for quick pass/fail checks reduces cycle time at the inspection station. The gauge conforms to DIN 13 and the 6g tolerance band, which means it verifies whether an internal thread meets the nominal geometry required for metric ISO fine threads. Using a dedicated acceptance gauge simplifies the decision to accept a component: if the gauge enters freely, the thread is within tolerance; otherwise further investigation is required. The compact construction and low mass support rapid handling and repeatable checks during series production. Durable construction that keeps calibration intervals long Made from hardened gauge steel, this ring gauge resists wear and maintains dimensional stability under frequent use. The hardened surface slows material loss from abrasion, preserving the defined thread form and thus reducing the frequency of rework or replacement. For traceability the item is supplied with a clear SKU and GTIN, enabling straightforward inventory and inspection planning. The low weight facilitates handheld checks without strain while the robust material ensures consistent contact geometry across many inspection cycles. Integrates with standard quality routines and inspection tools The ring gauge is suitable as part of a structured in‑process inspection routine in machine shops and assembly lines that require objective thread verification. Its right‑hand orientation matches standard thread directions used in most assemblies. As a simple mechanical tool it complements optical or tactile measurement methods by providing a direct functional test of thread fit and lead. Combining a go gauge with statistical sampling or torque‑controlled assembly steps improves overall process reliability and reduces the risk of assembly failure due to faulty threads. For application guidance, calibration options or to secure supply of Metav IndustryLine gauges contact Metav Werkzeuge GmbH in Emmerich — expert advice and fast delivery for production‑ready inspection tools. Technical data Article number: M315.110.2 GTIN: 4054469123936 Weight: 0.05 kg Material: Gauge steel, hardened Thread size: M10 x 0.5 mm Tolerance/class: DIN 13, 6g Hand: Right‑hand thread Core specifications Nominal size: M10 Pitch: 0.5 mm Mass: 0.05 kg Tariff code: 90173000 Special features Go (acceptance) ring gauge Conforms to DIN 13 standard Hardened construction for wear resistance Category: Gauges / Ring gauges Manufacturer brand: Metav IndustryLine FAQ Is this a Go or No‑Go gauge? This is a Go ring gauge intended to confirm acceptable internal threads for M10 x 0.5 mm metric fine threads; the item is listed as Thread ring gauge M10 x 0.5 mm (Go) (SKU M315.110.2) from Metav IndustryLine. Which thread standard and tolerance does it verify? The gauge checks threads to DIN 13 in tolerance class 6g, providing a standardised acceptance criterion for metric ISO fine threads. What material is the gauge made from and how durable is it? The ring is manufactured from hardened gauge steel, offering enhanced wear resistance and long service life under regular inspection use. How is the gauge typically used in an inspection routine? The gauge performs a direct functional check: if the go ring gauge enters the thread freely, the internal thread meets the acceptance criteria; failure to enter indicates the part requires further assessment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x0.75 Thread Limit Plug Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Ensure consistent quality control with the combination of M10 x 0.75 mm thread size, DIN 13 / 6H tolerance and hardened gauge steel construction — a compact limit plug gauge that enables rapid go/no-go verification and reliable batch inspection. Order this gauge directly via Metav Werkzeuge or consult their specialists for application-specific guidance. M10 x 0.75 mm Limit (Go/No‑Go) Thread Plug Gauge — Metric ISO fine thread, right‑hand, hardened gauge steel (Metav IndustryLine) The M10 x 0.75 mm Limit (Go/No‑Go) Thread Plug Gauge is designed for quick verification of metric ISO fine threads in production and inspection environments, providing an efficient right‑hand check for conformity to established tolerances Metric ISO fine thread M10 x 0.75 mm Conforms to DIN 13, tolerance 6H Hardened gauge steel construction Compact go/no-go design for visual check Fast verification that prevents production delays A limit plug gauge of this type delivers immediate go/no-go decisions at the point of manufacture. By confirming a thread as either within the DIN 13 / 6H tolerance or out of tolerance, the tool reduces downstream rework and stops non‑conforming parts from entering assembly. The short inspection cycle makes the gauge ideal for repetitive checks on fast‑moving production lines, ensuring process reliability and reduced scrap rates. Durable material and compact handling for shop‑floor use Manufactured from hardened gauge steel, the gauge resists wear during ongoing use and keeps measurement integrity over many inspection cycles. The compact format and low mass make handling straightforward for operators, while the robust material supports prolonged service life under typical workshop conditions. This combination helps maintain calibration stability and contributes to consistent inspection results. Simple concept, measurable savings in quality management The limit plug design enables rapid visual and tactile checks without complex fixturing or instrumentation: the "go" end confirms minimum material presence and fit, the "no‑go" end detects oversize conditions. Integrating this gauge into routine sampling plans improves throughput by shortening inspection time per part and lowering the need for secondary checks, presenting a clear cost‑efficiency argument for production teams. Traceability and conformity for documentation chains Produced to adhere to recognised thread standards, the gauge supports traceable compliance activities in quality documentation. Its concise specification — including the M10 x 0.75 mm designation and DIN 13 / 6H class — simplifies record keeping and audit trails. For applications requiring certified calibration, refer to the available calibration options and lab certificates offered through Metav Werkzeuge to fit specific quality system demands. Choose the Metav IndustryLine M10 x 0.75 mm limit plug gauge for dependable, repeatable thread checks and contact Metav Werkzeuge in Emmerich for tailored inspection advice and supply queries Technical data Article number: M315.010.3 SKU: M315.010.3 GTIN: 4054469122274 Eclass: 21170235 Weight: 0.05 kg Facts Thread: M10 x 0.75 mm Tolerance class: 6H Zolltarifnummer: 90173000 Special features Material: gauge steel, hardened Standard: DIN 13 Right‑hand thread Limit (go/no‑go) plug gauge Category: Gauges / Plug gauges FAQ What is the primary use of this plug gauge? The limit plug gauge M10 x 0.75 mm is intended for quick go/no‑go checks of metric ISO fine threads to confirm conformity with DIN 13 / 6H tolerances. Which material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which ensures resistance to wear and long‑term dimensional stability during routine inspections. How does the DIN 13 / 6H designation influence acceptance criteria? DIN 13 defines the thread form and dimensions for metric threads; the 6H tolerance class specifies the internal thread tolerance range used as the acceptance benchmark for the plug gauge. Is this gauge suitable for production line sampling? Yes, the compact limit plug design is optimised for rapid sampling checks on production lines, facilitating efficient quality control without complex equipment. How is the product identified for procurement or record keeping? The gauge is listed under SKU M315.010.3 and GTIN 4054469122274 for unambiguous ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x1 Thread Go Gauge Right-Hand Metric ISO Fine Thread DIN 13, Hardened Gauge Steel - Metav IndustryLine
High-precision thread verification with a hardened gauge-steel body and DIN 13 tolerance ensures repeatable assessments; lightweight design supports fast inline checks. Benefit from reliable inspection and robust construction—order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge M10 x 1, ISO fine thread (right-hand) — Metav IndustryLine The Thread ring gauge M10 x 1 is a hardened ring gauge designed for quick verification of ISO metric fine external threads in production and inspection environments. Hardened gauge steel for longevity Conforms to DIN 13, tolerance 6g Compact 0.04 kg ring for easy handling Consistent verification for production control A dedicated thread ring provides an objective, fast method for assessing external threads. Built to DIN 13 with a 6g tolerance class, this ring gauge delivers consistent go/no-go results that support traceable quality decisions on the shop floor. The clear conformity to DIN standards simplifies documentation and reduces interpretation effort during batch checks, so process control becomes more efficient and less reliant on operator judgement. Durable design that reduces downtime Manufactured from hardened gauge steel, the gauge resists wear in continuous use and maintains dimensional stability over many inspection cycles. The low mass of 0.04 kg and compact form factor make handling straightforward during repetitive checks or when moving between workstations. Robust material selection and heat treatment lower the frequency of replacements, contributing directly to higher equipment uptime and predictable inspection costs. Practical application and workflow integration Engineered as a right-hand M10 x 1 thread ring, the tool is intended for direct inspection of external ISO metric fine threads produced on lathes, automatic machines or as part of end-of-line checks. The ring functions as an immediate pass/fail indicator, enabling rapid sorting and reducing the time taken for each part assessment. Where quick decisions are essential, the gauge streamlines inspection throughput while maintaining the precision required for serial production. Traceability and shop-floor clarity The straightforward nature of a thread ring gauge supports documented inspection routines without complex setup. Because the gauge obeys recognised standards, results are comparable across shifts and facilities, aiding reproducibility in quality records. Its compact geometry also makes storage and handling uncomplicated in busy inspection benches, promoting regular use as part of standard operating procedures. For reliable, standards-compliant thread inspection backed by Metav IndustryLine quality, contact Metav Werkzeuge to place an order or request advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.210.4 GTIN: 4054469125619 Brand: Metav IndustryLine Data Thread size: M10 x 1 Weight: 0.04 kg Standard / tolerance: DIN 13, 6g Special features Material: hardened gauge steel Right-hand thread Designed for go/no-go inspection of external ISO metric fine threads FAQ What thread form and pitch does this gauge check? The gauge checks an external ISO metric fine thread with a size of M10 x 1; the specification is recorded in the product data for the Metav IndustryLine thread ring gauge (SKU M315.210.4). Is the ring suitable for production use on the shop floor? Yes, the hardened gauge-steel construction and DIN 13, 6g tolerance make the ring suitable for regular production inspection and quick go/no-go decisions. Which materials is the gauge compatible with? The ring is intended to verify thread form irrespective of the workpiece material; the gauge itself is manufactured from hardened gauge steel for durability. How should the ring gauge be integrated into inspection procedures? Use the ring as a final go/no-go check for external threads during batch control or post-machining inspection; document acceptance consistent with internal quality protocols and the DIN 13 tolerance class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x1 Thread Go Ring Gauge Metric ISO Fine Thread Right-Hand DIN 13, Hardened Steel - Metav IndustryLine
Achieve reproducible thread inspection with a hardened gauge steel construction and DIN 13 6g tolerance; the combination of precise fit and robust material ensures reliable pass/fail checks in production. Order the thread gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread ring gauge M10 x 1 mm — Go gauge for metric ISO fine threads, DIN 13, 6g (Metav IndustryLine) A Thread ring gauge M10 x 1 mm designed for quick, reproducible verification of right‑hand metric ISO fine threads in workshop and production environments Metric ISO fine thread M10 x 1 Hardened gauge steel construction Tolerance grade 6g to DIN 13 Right‑hand go ring gauge for pass checks Consistent measurement where production depends on repeatability The ring is manufactured from hardened gauge steel, delivering dimensional stability and wear resistance that sustain repeated checks on threaded components. As a go ring gauge, it provides an unambiguous pass condition for external threads, speeding up routine inspections and reducing cycle times on the shop floor. The use of a standardised tolerance (DIN 13, 6g) means acceptance criteria are traceable to industry norms, supporting consistent quality control across batches and suppliers. Robust design for workshop and inspection environments Compact and lightweight at approximately 0.05 kg, the gauge is easy to handle while offering the rigidity required for reliable engagement with the mating thread. The hardened material minimises the need for frequent replacement, lowering total lifecycle disruption. In addition to the mechanical properties, the ring’s M10 x 1 geometry and right‑hand configuration make it suitable for automotive, machinery and small‑component assembly applications where fine metric threads are common. How the gauge integrates into quality workflows The primary role of a go ring is to confirm that an external thread meets the maximum material condition for assembly. When the part threads fully into the go ring gauge M10 x 1 mm, the thread is accepted; failure to engage indicates a non‑conforming part. Using this gauge as part of a staged inspection routine—first with go gauges, then with calibrated measuring probes where needed—optimises throughput and ensures that downstream assembly and sealing operations proceed without rework. Traceability is supported by the product’s standard conformity to DIN 13, simplifying documentation and acceptance in supplier chains. Request a quotation or technical clarification from Metav Werkzeuge for the Metav IndustryLine M10 go ring gauge to secure compliant thread checks for production and inspection tasks Technical data Article number: M315.110.4 SKU: M315.110.4 GTIN: 4054469123950 Weight: 0.05 kg Material: Hardened gauge steel Standard: DIN 13, 6g Facts Thread size: M10 x 1 Thread direction: Right‑hand Function: Go (pass) ring gauge Special features Application: Verification of metric ISO fine external threads Construction: Hard, wear‑resistant gauge steel Category: Ring gauge for routine pass/fail inspection FAQ What is the intended use of this ring gauge? The ring gauge is intended for pass/fail verification of external M10 x 1 metric ISO fine threads; the Metav IndustryLine go ring gauge M10 x 1 mm (SKU M315.110.4) confirms whether threads meet the DIN 13, 6g acceptance condition. Does the gauge indicate tolerance class and standard? Yes, tolerance class 6g and conformity to DIN 13 are specified for this ring gauge, enabling standardised acceptance criteria in production. What material is the gauge made from and why does it matter? Manufactured from hardened gauge steel, the ring offers high wear resistance and dimensional stability, which preserves the inspection fit during repetitive use and reduces replacement frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x1.25 Thread Go/No-Go Plug Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H Hardened Gauge Steel - Metav IndustryLine
Data inconsistency detected: the product record indicates both scrapped and approved quality statuses; please verify the source data before a product description can be generated. This issue may arise due to errors in data entry, system glitches, or conflicting updates from multiple sources. Ensuring the accuracy of the source data is crucial to avoid further complications in downstream processes, such as inventory management, customer communication, or compliance reporting. Please review the relevant records, cross-check with associated systems, and resolve any discrepancies. Once the data has been verified and corrected, a product description can be generated without risk of propagating inaccurate information.
M10x1.25 Thread Ring Gauge, Go, Metric ISO Fine Thread, Right-Hand, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a robust Go ring gauge that combines DIN 13 / 6g conformity with hardened gauge steel construction for reliable in-process checks; order the thread ring gauge directly from Metav Werkzeuge or contact our consultants for specification advice. Thread ring gauge M10 x 1.25 mm — Go gauge, DIN 13 (Metav IndustryLine) The Thread ring gauge M10 x 1.25 mm is a precision inspection tool for verifying metric ISO fine threads in production and quality control environments DIN 13 / 6g thread standard compliant Hardened gauge steel construction Go gauge for M10 x 1.25 right-hand threads Consistent pass/fail assurance for fine metric threads The M10 x 1.25 mm ring gauge is designed as a Go gauge to confirm that threaded parts meet the maximum material condition specified by DIN 13. Used at incoming inspection points or directly on the shop floor, the gauge provides an immediate, objective decision: parts that accept the Go gauge meet the required external thread dimensions within the 6g tolerance band. This quick verification reduces measurement time compared with full dimensional inspection and prevents non-conforming parts from progressing through assembly, supporting stable production flow and lower rework rates. Durable construction for repeatable measurements Manufactured from hardened gauge steel, the ring gauge resists wear and retains its functional form through frequent use. The material choice and heat treatment ensure dimensional stability under normal workshop conditions and preserve the gauge’s mating geometry for repeated checks. The item’s compact mass (0.07 kg) makes it easy to handle at the bench or integrate into a fixture for batch sampling, while the solid construction supports long service intervals and predictable maintenance planning. Clear specification and traceable standards The gauge is produced to DIN 13 with the 6g fit class and is tailored for right-hand threads, which simplifies selection and avoids ambiguity at procurement. Its designation as a Go ring gauge clarifies its inspection role: it verifies that an external thread is not oversize at the functional maximum material condition. For comprehensive acceptance protocols, the Go gauge is typically paired with a corresponding No-Go gauge; where full go/no-go control is needed both gauges will be specified to establish upper and lower acceptance limits. Practical use in workshop and quality labs This ring gauge suits machine shops, thread production lines and quality departments that require fast, repeatable checks for metric ISO fine threads. The simple pass/no-pass interaction reduces operator interpretation and speeds up sampling routines during serial production. When incorporated into a traceable inspection routine, the gauge supports consistent conformity checks and contributes to improved first-pass yield and reduced scrap. For engineered or safety-critical applications, it forms part of a broader measurement strategy alongside calibrated measuring equipment. For procurement or technical clarification on the Metav IndustryLine M10 x 1.25 mm Go gauge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for rapid supply and expert advice Technical data Article number: M315.110.5 GTIN: 4054469123967 Weight: 0.07 kg Size: M10 x 1.25 Norm: DIN 13, 6g Manufacturer: Metav IndustryLine Facts Thread pitch: 1.25 mm Nominal diameter: 10 mm Tariff number: 90173000 Special features Material: hardened gauge steel Type: Go ring gauge Thread direction: right-hand Category: Gauges / Ring gauges FAQ What does this gauge check? The ring gauge checks external metric ISO fine threads; the Thread ring gauge M10 x 1.25 mm confirms acceptance to the DIN 13 tolerance for a 6g fit. Is a No-Go gauge included? This product is supplied as a Go gauge only; for full go/no-go control a matching No‑Go gauge should be specified separately. Can the gauge be used for left-hand threads? No — the gauge is manufactured for right-hand threads and will not correctly verify left‑hand thread forms. What material and durability can be expected? Made from hardened gauge steel, the gauge is resistant to wear and suited for repeated shop-floor checks with long service life. Is the gauge traceable to a standard? The gauge is produced to DIN 13 with the 6g fit class, enabling specification‑based inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10x1.5 Go/No-Go Thread Plug Gauge Three-Point, Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
The supplied product data contains contradictory quality information: the item is simultaneously flagged as suitable for use and as rejected/scrap. This inconsistency prevents the generation of a reliable, standards-compliant product description and technical specification. Please verify the intended quality status and provide a single, definitive value for the item's condition and usability. To proceed with a full product text, confirm whether the gauge is classified as serviceable or as scrap, and supply any missing verification details such as calibration status, final inspection outcome or corrected quality markers. Once the conflicting entries are resolved, a complete, compliant British English product description — including conformity to DIN 13/6H, material specification, mass and ordering information — can be produced immediately.
M10×0.75 Thread Go Ring Gauge ISO Fine Thread Right Hand DIN 13, Hardened Gauging Steel - Metav IndustryLine
Combine DIN 13 traceability with hardened gauge‑steel durability and the compact M10×0.75 pitch for dependable thread inspection in production and quality control; order the ring gauge directly via Metav Werkzeuge or ask our consultants for application guidance. Thread ring gauge M10 x 0.75 mm — hardened gauge steel, DIN 13 (6g), right‑hand (Metav IndustryLine) The Thread ring gauge M10 x 0.75 mm is a DIN‑13, tolerance‑class 6g, right‑hand gauge intended for verification of metric ISO fine threads in manufacturing and incoming inspection; it provides a compact, robust check for M10 fine‑pitch threaded parts. Hardened gauge steel construction DIN 13 tolerance class 6g For metric ISO fine thread M10×0.75 Right‑hand thread verification Consistent conformity for efficient inspection Featuring the DIN 13 specification and tolerance class 6g, this ring gauge offers a straightforward means to confirm whether an M10 fine‑pitch thread meets required limits. The nominal size M10 with a pitch of 0.75 mm is common in precision assemblies; using a dedicated thread ring eliminates guesswork by giving a pass/fail indication against the standard. The tool is suitable for shop‑floor sampling as well as final acceptance checks, enabling faster decisions and reducing the risk of out‑of‑tolerance components entering assembly. Built to endure repeated use in production Manufactured from hardened gauge steel, the ring gauge resists wear and preserves its measurement edges under frequent engagement, which extends service life and maintains reproducible results. The compact mass (0.04 kg) and simple geometry make handling and storage straightforward while keeping the gauge stable during verification. Routine maintenance involves careful cleaning and light protective oiling; these simple measures protect the hardened surfaces and help the gauge retain its functional integrity over long production runs. Practical integration into quality workflows The ring gauge supports lean inspection routines by offering a rapid, unambiguous assessment of thread acceptability that complements dimensional measuring instruments. When incorporated into a quality control plan, the gauge reduces cycle time for threaded part inspection and helps minimise scrap and rework through early detection. Supplied as part of the Metav IndustryLine, the tool benefits from Metav’s sourcing and distribution expertise, which aims to make precision metrology accessible to workshops and production facilities across Europe. Choose the Metav IndustryLine thread ring gauge for DIN‑13 traceability and robust gauge‑steel durability — contact Metav Werkzeuge for procurement and application advice. Technical data Article number: M315.210.3 SKU: M315.210.3 GTIN: 4054469125602 Weight: 0.04 kg Core data Nominal thread: M10 Pitch: 0.75 mm Tolerance class: 6g Standard: DIN 13 Tariff code: 90173000 Special features Material: hardened gauge steel Right‑hand thread verification For metric ISO fine threads Category: gauges (ring gauge) FAQ What tolerance and standard does the ring gauge check for? The Thread ring gauge M10 x 0.75 mm verifies conformity to DIN 13 with tolerance class 6g, providing a direct check against the applicable metric ISO fine‑thread limits. Is the ring gauge suitable for continuous use on a production line? Yes, the hardened gauge‑steel construction of the Metav IndustryLine ring gauge and its compact design make it suitable for frequent engagement in production sampling and routine quality control. Can the gauge be used for left‑hand threads? This ring gauge is manufactured for right‑hand threads; left‑hand variants require a specifically designated left‑hand ring or an alternative gauge. How should the gauge be stored and maintained between uses? After inspection, clean the gauge of chips and debris, apply a light protective oil film and store in a dry, secure place to preserve the hardened surfaces and ensure repeatable performance. Is the Metav IndustryLine ring gauge traceable or supplied with a calibration certificate? The product description does not state an included calibration certificate; for traceability or a specific calibration requirement, Metav Werkzeuge can advise on available calibration services and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10×1 Limit Thread Plug Gauge Right-Hand For Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, a DIN 13 tolerance class 6H, and a compact, lightweight design to ensure fast, reproducible thread checks in production. Order the gauge directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Limit plug gauge M10 x 1 — Metric ISO fine thread, hardened gauge steel (Metav IndustryLine) The limit plug gauge M10 x 1 is a dedicated right-hand inspection gauge for rapid verification of metric ISO fine threads in production and quality control environments Hardened gauge steel construction For metric ISO M10 x 1 fine threads Manufactured to DIN 13 tolerance class 6H Compact and lightweight for quick checks Ensure parts leave the line within specification This limit plug gauge M10 x 1 is designed for concise go/no‑go checks that remove ambiguity from thread inspection. Manufactured to DIN 13 with a 6H tolerance class, the gauge provides an objective pass/fail decision that shortens inspection time and reduces subjective measurement error. The hardened gauge steel body resists wear, so the plug maintains its dimensional integrity under frequent use; this translates into fewer rejects, less rework and steadier process capability for serial production. Integrates smoothly into workshop and incoming‑goods routines Weighing only 0.04 kg and featuring a compact profile, the tool is easy to handle at assembly benches and receiving stations. The straightforward go/no‑go principle supports quick sampling plans and visual workflow integration: a pass confirms conformity, a fail triggers a stop-and-investigate action. For production planners and quality engineers, this means faster throughput and clear traceability of inspection steps. The right‑hand orientation is compatible with standard thread directions used in most assemblies. Robust material choice for repeatable inspections The hardened gauge steel construction gives the device excellent resistance to abrasion and deformation, preserving its functional limits across many inspection cycles. Routine handling and storage are simplified by its compact form, while maintenance mainly consists of clean, dry storage and occasional surface protection. Combining this durability with Metav’s supply chain and quality assurance philosophy ensures a reliable inspection tool that supports consistent product quality and reduces measurement‑related downtime. For reliable thread inspection based on DIN 13 and a hardened gauge steel design, contact Metav Werkzeuge for order details or application advice — Metav Werkzeuge GmbH is ready to assist by email or phone Technical data Article number: M315.010.4 GTIN: 4054469122281 Weight: 0.04 kg Thread size: M10 x 1 Standard: DIN 13, 6H Material: gauge steel, hardened Thread direction: right-hand Categories: Lehren; Messstifte Customs tariff number: 90173000 Facts Weight (kg): 0.04 Thread pitch (mm): 1 Tolerance class: 6H GTIN numeric: 4054469122281 Special features Go/no‑go limit plug design Hardened surface for wear resistance Compact, lightweight format for bench use Intended for metric ISO fine threads (M10 x 1) FAQ What inspection decision does this gauge support? The gauge is a go/no‑go limit plug designed to give a clear pass/fail result for internal threads; the limit plug gauge M10 x 1 (Metav IndustryLine, SKU M315.010.4) confirms whether an internal M10 x 1 thread meets the specified tolerance. Which standard and tolerance does the tool comply with? The device is manufactured to DIN 13 and set to tolerance class 6H, making it suitable for standard metric ISO fine thread acceptance criteria. Is the gauge suitable for frequent shop‑floor use? Yes; the hardened gauge steel construction is chosen to resist wear during repeated checks, making it appropriate for production and incoming‑goods inspection cycles. Can the gauge check left‑hand threads as well? No; this specific unit is configured for right‑hand threads only. Left‑hand verification would require the corresponding left‑hand gauge. Does the delivery include calibration documentation? No specific calibration certificate is indicated for this item in the product data; routine verification against master gauges is recommended to ensure ongoing conformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10×1.25 Thread Go Ring Gauge ISO Fine Thread Right-Hand Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Take advantage of a compact inspection solution that combines DIN 13, 6g traceability, hardened gauge steel construction and the clarity of a defined metric fine thread. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M10 x 1.25 mm (metric, right-hand) — Metav IndustryLine, hardened gauge steel A thread ring gauge M10 x 1.25 mm designed for fast verification of metric ISO fine threads in production and quality control environments. Precision to DIN 13, 6g tolerance Hardened gauge steel construction For M10 x 1.25 metric fine threads Right-hand thread checking tool Ensure interchangeability and conformity on every batch The thread ring gauge M10 x 1.25 mm provides a direct, reliable method to confirm that external threads meet the required metric ISO fine thread standard and the DIN 13, 6g tolerance. As a go/no-go style gauge, it supports rapid decision-making on the shop floor and helps prevent non-conforming parts from entering assembly. The clear standard reference reduces ambiguity during inspections and supports consistent acceptance criteria across shifts. Durable construction for repeatable checks and long service life Manufactured from hardened gauge steel, the ring gauge resists wear and maintains dimensional stability under repeated use. The robust material and hardened finish ensure repeatability of checks and minimise the need for frequent replacement, which contributes to lower total cost of ownership. Lightweight by design at approximately 0.04 kg, the gauge combines ease of handling with the rigidity required for short, high-frequency checks. Integration into inspection workflows for efficient quality control This metric thread gauge is sized and specified for inline checks, random sampling and final inspection routines. The compact format supports quick mounting on comparison fixtures or handheld verification, reducing cycle times without sacrificing precision. Traceable specification to the relevant norm simplifies documentation in quality records and helps align inspection procedures with production control objectives. For guaranteed thread verification rely on the Metav IndustryLine gauge — order via Metav Werkzeuge for secure supply and expert assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.210.5 GTIN: 4054469125626 Weight: 0.04 kg Material: hardened gauge steel Norm: DIN 13, 6g Facts Thread designation: M10 x 1.25 mm Tolerance class: 6g Tariff code: 90173000 ECLASS: 21170214 Special features Right-hand metric ISO fine thread Category: Gauges / Measuring devices Manufacturer: Metav IndustryLine Intended use: Thread verification in production and QC FAQ What tolerance class does the gauge check to? The ring gauge corresponds to DIN 13, 6g and is specified for acceptance testing of external metric ISO fine threads. Is the gauge suitable for production sampling? Yes. The Metav IndustryLine thread ring gauge M10 x 1.25 mm is designed for rapid in-process and final inspection sampling. What material is used for the gauge? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated use. Can this gauge check left-hand threads? This item is manufactured for right-hand metric threads; left-hand variants must be ordered separately. How light and portable is the gauge for handheld checks? With a weight of approximately 0.04 kg, the gauge is compact and easy to handle for short, frequent checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10×1.5 Thread Go Ring, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of standard‑compliant thread verification, wear‑resistant hardened gauge steel and a compact, easy‑to‑handle mass for consistent in‑line inspection results. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M10 x 1.5 Go thread ring gauge (DIN 13, 6g) — Metav IndustryLine The M10 x 1.5 Go thread ring gauge is a right‑hand, metric ISO check designed for rapid acceptance testing and process control in production and inspection environments Go ring gauge for M10 x 1.5 ISO metric Hardened gauge steel for long service life Conforms to DIN 13 with 6g tolerance Compact 0.08 kg test piece, easy handling Rapid verification that keeps production moving A Go ring gauge is a straightforward yet powerful tool for acceptance testing: when the ring engages fully, the threaded part meets the specified maximum material condition. The compact M10 x 1.5 size and low mass make this ring suitable for frequent checks at the machine or in the inspection bay, reducing setup time. Conformity with DIN 13 and the 6g fit ensures that inspection results are directly comparable to standardised requirements, helping to minimise scrap and unplanned rework. Durable construction for long service life and reproducible results Manufactured from hardened gauge steel, the gauge resists wear during repeated use, which preserves the thread form and measurement reliability over time. The robust material and heat treatment translate into fewer replacements and predictable maintenance cycles, supporting a lower total cost of ownership. Because the device is a purpose‑made thread ring gauge, it delivers repeatable go/no‑go decisions without interpreting measurements, which speeds quality control and reduces dependence on operator judgement. Integration into quality routines and traceability practices This ring gauge is ideal for routine quality checks, first‑article inspection and incoming goods verification where a clear go/no‑go verdict is required. Its compact form factor and the standard M10 x 1.5 metric interface allow seamless integration into shop‑floor inspection stations, toolcribs and benchmark fixtures. For organisations aiming to demonstrate process control, the gauge supports documented inspection steps and complements statistical monitoring to maintain production consistency and regulatory compliance. Contact Metav Werkzeuge for application guidance or to procure the Metav IndustryLine M10 x 1.5 Go thread ring gauge (M315.110) and ensure reliable thread inspection across production and quality checkpoints Technical Data Article number: M315.110 GTIN: 4054469123929 Label: M10 x 1.5 Go thread ring gauge, DIN 13, right‑hand Facts Thread size: M10 x 1.5 Weight: 0.08 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6g Type: Go (acceptance) ring gauge Orientation: right‑hand metric ISO thread FAQ What does "Go" mean for this ring gauge? A Go ring gauge confirms that a threaded component meets the maximum material condition; the M10 x 1.5 Go thread ring gauge (M315.110) should fully engage if the part is within tolerance, giving a clear accept/reject result. Which standard and tolerance does this gauge follow? The gauge is made to DIN 13 with a 6g tolerance, which aligns the verification with common metric ISO thread specifications for engineered fasteners. Is this gauge suitable for use at the machine or in the inspection room? Yes, the compact M10 x 1.5 format and low mass (0.08 kg) make the gauge convenient for both on‑machine checks and bench inspection routines where quick go/no‑go assessments are required. How should the ring gauge be stored and handled to maximise lifetime? Store the gauge dry and protected from mechanical damage; avoid dropping or using it as a torque tool. The hardened gauge steel construction gives good wear resistance, but careful handling preserves accuracy and service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10×1.5 Thread Ring Gauge Go Right-Handed DIN 13 6g Hardened Gauging Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction and the DIN 13 / 6g tolerance for consistent, repeatable checks of M10 × 1.5 metric threads; the compact design supports fast in‑line verification and reduces rework. Order the thread ring gauge directly via Metav Werkzeuge or request advice from our consultants for application support. Thread ring gauge M10 × 1.5 mm (DIN 13, 6g) — right‑hand metric ISO thread by Metav IndustryLine Thread ring gauge M10 × 1.5 mm for quick verification of external metric ISO threads in production and inspection environments Hardened gauge steel construction DIN 13 tolerance class 6g For M10 × 1.5 metric ISO threads Right‑hand thread verification Reliable, durable material for repetitive checks The ring is made from hardened gauge steel, a material chosen for its wear resistance and dimensional stability under frequent use. This stability ensures repeatable results over prolonged inspection cycles and reduces the need for frequent replacement, which in turn lowers downtime and keeps throughput steady. The robust material choice is particularly beneficial where many components are checked each shift, supporting efficient quality control without complex handling. Engineered to the ISO/DIN standard for clear pass/fail criteria Built to DIN 13 with a tolerance class of 6g, the gauge corresponds to the established parameters for metric ISO threads and provides an unambiguous reference for go/no‑go verification of external threads. The tolerance class indicates the fit and acceptable deviation for general engineering applications; using a standardised gauge simplifies communication between production and quality departments and supports consistent acceptance criteria across suppliers and batches. Integration into shop‑floor inspection and traceable workflows Designed as a simple, manual ring gauge, this device allows rapid tactile checks at the machine or on the inspection bench, helping to catch thread faults early and avoid costly assembly errors. The compact form factor and the standard M10 × 1.5 specification make it suitable for small‑batch work as well as repetitive series production. When combined with documented inspection routines, the gauge assists in maintaining traceable quality records and contributes to measurable reductions in scrap and rework. For reliable thread verification from a recognised metrology partner, choose the Metav IndustryLine ring gauge and contact Metav Werkzeuge for procurement and application guidance. Technical data Article number: M315.210 GTIN: 4054469125589 Weight: 0.1 kg Core specifications Thread size: M10 × 1.5 mm Norm / tolerance: DIN 13, 6g Direction: right‑hand thread Material: hardened gauge steel Special features Category: Thread ring gauge (external thread verification) Suitable for metric ISO standard threads Compact, workshop‑friendly design FAQ What is the intended use of this ring gauge? The ring gauge is intended for tactile, pass/fail verification of external M10 × 1.5 mm metric ISO threads in production and inspection environments; it provides a straightforward acceptance check against DIN 13 and the 6g tolerance class. Does the gauge check left‑hand threads? This specific gauge is manufactured for right‑hand threads; left‑hand versions must be ordered separately to verify left‑hand external threads. How does the DIN 13, 6g designation affect acceptance? DIN 13 defines the thread form and dimensions while 6g describes the external tolerance class; together they determine the maximum permissible deviations for a part to be accepted when checked with the gauge. Is the material suitable for high‑throughput inspection? Yes, the hardened gauge steel offers good wear resistance for regular shop‑floor use and helps keep measurement drift low across many inspection cycles. Can this gauge be used as a reference for calibration routines? The gauge provides a standardised mechanical reference for routine pass/fail checks; for formal calibration or traceability requirements, the gauge can be included in a documented inspection plan and serviced according to the facility’s calibration schedule. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x1.5 Go/No-Go Thread Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust GO thread ring gauge designed for reliable pass/fail checks: the hardened gauge steel construction and conformity to DIN 13, 6g deliver consistent thread verification while the included calibration certificate secures traceability and immediate use in quality control. Order the gauge directly via Metav Werkzeuge or consult our specialists for integration advice. Thread ring gauge GUT M110 x 1.5 — right-hand metric ISO fine-thread verifier (Metav IndustryLine) A thread ring gauge GUT M110 x 1.5 is a right-hand GO gauge for rapid verification of metric ISO fine threads in production and inspection environments Right-hand metric thread gauge M110 x 1.5 Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance 6g Consistent thread acceptance that reduces rework The ring functions as a definitive pass gauge for metric fine threads, ensuring that external threads mate within the intended tolerance band. Manufactured from hardened gauge steel, the gauge resists wear and preserves the reference profile during routine use; this stability translates directly into fewer false rejects and less rework on the shopfloor. Conformity to DIN 13 with the specified tolerance class 6g provides a clear, industry-recognised benchmark for assembly and inspection processes. Traceable calibration for immediate quality assurance Delivered with a calibration certificate, the GO gauge can be introduced into incoming inspection or final checks without delay. The certificate documents the measurement status at shipment and supports traceability for audits and quality records, which is particularly beneficial in regulated production chains. Where a documented proof of conformance is required, the supplied paperwork reduces administrative lead time and supports consistent decision-making during production control. Durable design and practical handling for workshop use The ring’s form factor and material selection balance durability with manageable handling: a solid construction that fits standard thread checks while weighing approximately 2 kg for stable placement during verification. The GO configuration simplifies routine checks to a single acceptance step, speeding throughtime in repetitive inspection tasks. Integrating the gauge as a fixed control in the inspection bench or portable toolbox offers a low-complexity solution for reliable thread acceptance in component and assembly verification. Purchase the Metav IndustryLine thread ring gauge through Metav Werkzeuge for assured quality and fast delivery from Emmerich; our team can advise on suitable inspection workflows and traceability options Technical Data Article number: M315.710.6 GTIN: 4054469152509 SKU: M315.710.6 Facts Thread size: M110 x 1.5 Weight: 2 kg Tariff number: 90173000 Standard: DIN 13, 6g Special features Material: hardened gauge steel Type: GO (GUT) thread ring gauge, right-hand Delivered with calibration certificate FAQ Is the gauge supplied with a calibration certificate? Yes. The thread ring gauge GUT M110 x 1.5 is supplied with a calibration certificate that documents its measurement status at delivery. Which standard and tolerance class does the gauge follow? The gauge conforms to DIN 13 with the tolerance class 6g, providing an industry-standard acceptance reference. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel; this ensures wear resistance and a stable reference profile over repeated use. Can this GO gauge be used for final assembly checks? Yes. The GO configuration of the Metav IndustryLine ring gauge facilitates rapid acceptance checks suitable for final assembly and quality control. What is the article number for ordering and inventory? Article number M315.710.6 and GTIN 4054469152509 identify this Metav IndustryLine thread ring gauge for procurement and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x1.5 Thread Go Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Benefit from a hardened gauge-steel construction and DIN 13, tolerance 6H for reliable thread acceptance tests; the gauge is supplied with a calibration certificate for traceable inspection results. Secure the M315.510.6 directly from Metav Werkzeuge or consult their technical advisors for specification matching. Go thread plug gauge M110×1.5 (metric ISO fine thread), right-hand — Metav IndustryLine The Go thread plug gauge M110×1.5 is designed for fast, repeatable verification of internal metric ISO fine threads in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Consistent inspection results for production environments The Go plug gauge provides a quick, objective means of verifying whether an internal thread falls within specified limits. Made from hardened gauge steel, the gauge resists wear under repeated use, which preserves the thread profile and maintains measurement integrity over time. In-process checks with this type of gauge reduce downstream rework and support a controlled production flow by delivering immediate pass/fail information for threaded bores. Clear compliance with international thread standards Built to DIN 13 with a 6H tolerance, the tool ensures that the inspected threads meet the common European metric specifications for internal threads. The nominal size M110×1.5 denotes a fine-pitch metric ISO thread; the right-hand configuration matches standard assembly conventions. For organisations that must demonstrate conformity, the standardised profile and tolerance class simplify documentation and auditability during quality reviews. Traceable calibration to support quality systems Each unit is supplied with a calibration certificate, enabling traceability for internal quality assurance and supplier records. The certificate documents the inspection state at delivery and supports internal calibration intervals, helping to maintain compliance with quality management systems. Where measurement traceability is required for production releases or incoming inspection, the included documentation reduces administrative effort and strengthens process reliability. Robust design for workshop and inspection use The gauge’s hardened construction and precise manufacturing make it suitable for repeated use in busy workshop settings and metrology departments. Its nominal mass and compact geometry allow straightforward handling during manual checks, while the clear designation as a Go gauge avoids ambiguity on the shop floor. Regular inspection routines that use purpose-made gauges like this one help to sustain component interchangeability and assembly quality. Practical benefits for procurement and inventory Selecting a purpose-made thread plug gauge streamlines verification tasks and reduces reliance on subjective measurement techniques. The gauge’s conformity to established standards and the inclusion of a calibration certificate make it a practical choice for companies that require documented, repeatable inspection processes. Where a calibrated, ready-to-use gauge is preferred, this item arrives prepared for immediate deployment in inspection sequences. Contact Metav Werkzeuge for expert guidance on integrating the calibrated Go thread plug gauge M110×1.5 into production checks and to confirm stock availability of the M315.510.6 Technical Data SKU: M315.510.6 GTIN: 4054469152028 Material: hardened gauge steel Calibration: calibration certificate included Weight: 2 kg Core technical data Nominal thread: M110×1.5 Tolerance class: 6H Thread direction: right-hand Tariff code: 90173000 Special features Go (acceptance) thread plug gauge for internal threads Complies with DIN 13 thread form Hardened gauge-steel construction Supplied ready for inspection with calibration certificate FAQ What is the primary purpose of this Go thread plug gauge? The Go thread plug gauge is intended to verify whether an internal metric ISO fine thread is within the acceptable tolerance; the M315.510.6 confirms acceptance quickly and unambiguously. Which standard and tolerance does the gauge follow? The gauge conforms to DIN 13 and the 6H tolerance class, matching standard specifications for internal metric threads. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate that documents its inspection state at delivery. Can this gauge inspect left‑hand threads? No, the tool is manufactured for right‑hand metric threads only; left‑hand threads require a corresponding left‑hand gauge. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which provides wear resistance and helps preserve the thread profile for consistent inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x1.5 Thread Go/No-Go Gauge, Right-Hand Metric ISO Fine Thread, Hardened Gauge Steel, Calibrated - Metav IndustryLine
Take advantage of fast, traceable inspection with a hardened gauge-steel plug, calibrated and delivered with a certificate, and conformity to DIN 13 (6H) for reliable thread control; order directly via Metav Werkzeuge or consult the Metav team for application advice. No-go Thread Plug Gauge M110 x 1.5 — Plug Gauge for Metric ISO Fine Thread (Right‑hand) The No‑go Thread Plug Gauge M110 x 1.5 is a hardened plug gauge designed to verify right‑hand metric ISO fine threads to DIN 13, tolerance 6H, for production and incoming inspection. Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance 6H Metric fine thread M110 x 1.5, right‑hand Ensure conformity where it matters most The No‑go plug gauge delivers a concise go/no‑go decision that removes ambiguity from thread checks. Built from hardened gauge steel, the instrument resists wear during repetitive use and preserves the defined tolerance limit specified by DIN 13 (6H). In process control, this direct mechanical check avoids interpretation and supports quantitative quality procedures; the result is a clearly reproducible acceptance criterion that integrates with in‑line sampling plans and manual inspection routines. Robust design that reduces rework and downtime A compact, purpose‑made plug offers high mechanical stability and a straightforward handling profile. The gauge’s metric sizing M110 x 1.5 with right‑hand orientation corresponds to common fine‑thread applications in assemblies and housings, so inspections are quicker and less prone to operator error. The hardened material ensures dimensional stability across repeated cycles, which translates into fewer false rejects, less reworking and a smoother production flow when compared with temporary or improvised checking methods. Calibrated traceability for audit and quality systems The tool is supplied with a calibration certificate, allowing its direct use in documented quality processes and aiding traceability during audits. Calibration confirms the tool’s compliance with its nominal limits and makes it suitable for documented incoming‑inspection or periodic verification tasks. Where documented proof of conformity is required for serial production runs, the delivered certificate supports transparent recordkeeping and helps maintain supplier and customer confidence. For dependable thread inspection, choose the Metav IndustryLine No‑go plug gauge and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich. Technical data Article number: M315.610.6 GTIN: 4054469152264 Type: No‑go plug gauge Thread size: M110 x 1.5 Hand: Right‑hand Material: Hardened gauge steel Standard: DIN 13, tolerance 6H Supplied with: Calibration certificate Weight: 2 kg Commodity code: 90173000 Facts Weight: 2 kg Thread pitch: 1.5 mm Dimension designation: M110 SKU: M315.610.6 Special features Hardened gauge‑steel construction Conformity: DIN 13 (6H) Delivered with calibration certificate Intended use: verification of metric ISO fine threads Categories: Messstifte; Lehren FAQ What is the intended inspection function of this plug gauge? The No‑go plug gauge performs a no‑go (reject) check for metric ISO fine threads; if the gauge does not enter, the thread meets the specified tolerance for the tested limit. Is a calibration document included with the gauge? Yes, the plug gauge is supplied with a calibration certificate that documents the inspection limits and supports traceability in quality systems. Which standard does the gauge comply with? This gauge is manufactured to the requirements of DIN 13 with tolerance class 6H for metric ISO threads. Can this gauge be used for left‑hand threads? No, this item is specified as a right‑hand metric fine‑thread plug; left‑hand checks require a corresponding left‑hand gauge. What material is the gauge made from and why is that important? The gauge is made from hardened gauge steel, ensuring wear resistance and dimensional stability during repeated use, which maintains reliable inspection limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x1.5 Thread Go/No-Go Ring, Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
A compact inspection solution for reliable rejection control: the hardened gauge steel construction and conformity to DIN 13 (6g) ensure reproducible results when checking fine metric threads; the item is supplied with a calibration certificate and can be ordered directly via Metav Werkzeuge or discussed with our consultants. Thread ring gauge (NO‑GO) M110 x 1.5 — right‑hand, hardened gauge steel (Metav IndustryLine) Thread ring gauge (NO‑GO) M110 x 1.5 designed for rapid acceptance testing of right‑hand metric ISO fine threads in production and inspection environments. No‑go thread gauge for M110 x 1.5 Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Assured rejection testing for metric fine threads A purpose‑built no‑go thread ring provides a clear go/no‑go decision without interpretation. Manufactured for the M110 x 1.5 metric fine thread form and finished to DIN 13 (6g), this gauge offers a deterministic check that flags out‑of‑tolerance threads immediately. The binary nature of a reject‑ring simplifies inline quality control, reducing time spent on subjective assessments and decreasing the risk of assembly failures further down the line. Where process stability and repeatability matter, the NO‑GO ring acts as an efficient barrier against nonconforming parts while supporting throughput in serial production. Durable construction for repeatable measurements Made from hardened gauge steel, the ring resists wear and preserves the nominal limiting profile under regular use, which sustains measurement fidelity over many cycles. The right‑hand orientation and fine pitch geometry are produced to match ISO metric thread geometry for which the gauge is intended, delivering consistent tactile feedback during inspection. Robust material and finish mean fewer calibrations due to wear and a longer service interval, which translates into lower lifetime cost and more predictable inspection workloads for production or incoming goods control. Calibrated and traceable for production assurance The gauge is supplied with a calibration certificate, documenting the inspection status at the time of delivery and supporting traceability within quality systems. This documentation facilitates audit readiness and links the physical control to recorded measurement evidence, which is particularly valuable in regulated industries or where supplier quality agreements require documented conformity. Using a calibrated reject ring helps maintain process capability targets by preventing out‑of‑tolerance components from entering assembly, thereby improving first‑pass yield and customer confidence. Select the Metav IndustryLine NO‑GO thread ring for robust inline rejection testing and contact Metav Werkzeuge in Emmerich for stock availability or application advice and local delivery from our European quality hub Technical data SKU: M315.810.6 GTIN: 4054469152745 Customs tariff number: 90173000 Facts Thread size: M110 x 1.5 Weight: 2 kg Standard: DIN 13 (6g) Special features Material: hardened gauge steel Function: NO‑GO / reject thread ring gauge, right‑hand Supplied with calibration certificate FAQ What is the purpose of a NO‑GO thread ring gauge? A NO‑GO thread ring gauge is used to identify threads that exceed the permissible size or form limits; the NO‑GO condition indicates that the thread does not meet the specified tolerance for the M110 x 1.5 metric fine thread. Is the gauge traceable for quality audits? Yes, the gauge is supplied with a calibration certificate that documents the inspection at delivery and supports traceability within quality management systems. Which standard does the ring correspond to? The ring is manufactured to meet DIN 13 (6g) for the ISO metric fine thread form and tolerance class specified for this size. Can the gauge be used for both internal and external threads? This product is a thread ring (NO‑GO) intended for external thread inspection against the specified internal reference profile for M110 x 1.5 right‑hand threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which provides high wear resistance and stable measurement characteristics over prolonged use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x2 Go/No-Go Thread Plug Gauge For ISO Fine Metric Thread Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of the combination of reliable rejection detection, hardened construction and traceable calibration to keep threaded parts within specification. Order the gauge directly via Metav Werkzeuge or consult our specialists for technical advice. Thread plug gauge M110 x 2.0 – No‑go, right‑hand, DIN 13 6H (Metav IndustryLine) The Thread plug gauge M110 x 2.0 is a right‑hand no‑go gauge for verification of metric ISO fine threads to DIN 13, 6H, intended for inspection and reject control in production and incoming goods. No‑go plug gauge for M110 x 2.0 threads Hardened gauge steel construction Supplied with calibration certificate Right‑hand metric ISO fine thread, DIN 13 6H Prevent assembly of oversize threaded parts A dedicated no‑go gauge is the most efficient way to prevent oversized threads entering assembly. The plug design verifies the M110 x 2.0 pitch diameter and thread form against DIN 13, 6H, providing an immediate go/no‑go decision without time‑consuming measurements. This direct check reduces rework and machine downtime by catching nonconforming parts at the inspection stage, ensuring only threads within tolerance progress to production or dispatch. Traceable calibration for audit‑ready quality control The gauge is delivered with a calibration certificate, giving documented proof of inspection at delivery. The supplied certificate supports traceability in quality systems and simplifies acceptance by incoming inspection or QA departments. For audit purposes, the record accompanying the gauge demonstrates that the measuring equipment was verified before use, which is particularly valuable in regulated environments and structured production chains. Robust build for workshop and inspection use Manufactured from hardened gauge steel, the plug withstands repeated use on the shop floor while maintaining form integrity. The right‑hand configuration matches standard threaded components, and the compact, single‑piece construction minimises deformation risk during handling. The substantial construction and clearly defined thread profile ensure long service life and reliable performance in routine sampling and process control. Seamless integration into production inspection routines Designed as a practical tool for acceptance testing, the gauge fits standard inspection benches and portable kits. The clear go/no‑go result speeds up sampling plans and outgoing inspections, supporting consistent quality flows. The Metav IndustryLine plug gauge (SKU M315.610.7) complements existing metrology sets and is suitable for use in incoming goods, in‑process checks and final inspection to maintain production reliability. Secure traceable rejection control with the Metav IndustryLine M110 x 2.0 no‑go thread plug gauge — contact Metav Werkzeuge for expert advice and prompt supply. Technical Data Article number: M315.610.7 GTIN: 4054469153193 Size: M110 x 2.0 Material: Gauge steel, hardened Standard: DIN 13, 6H Weight: 2 kg Tariff code: 90173000 Supplied with calibration certificate Facts Thread size: M110 x 2.0 Weight: 2 kg Tariff number: 90173000 Special features No‑go (Ausschuss) thread plug gauge, right‑hand Material: hardened gauge steel Standard conformity: DIN 13, 6H Calibration certificate included Category: Gauges / Thread plug gauge FAQ What does the 'no‑go' designation mean for this gauge? The no‑go designation indicates the plug is intended to detect threads that exceed the upper tolerance limit; if the plug enters, the part is rejected. The Thread plug gauge M110 x 2.0 (Metav IndustryLine, SKU M315.610.7) is therefore used to prevent oversized threads from passing inspection. Is a calibration certificate supplied with the gauge? Yes, the gauge is supplied with a calibration certificate that documents the inspection at delivery and supports traceability in quality systems for the Metav IndustryLine thread plug gauge M110 x 2.0. Which standard and tolerance class does the gauge check to? The plug verifies metric ISO fine threads to DIN 13, 6H, ensuring compatibility with components manufactured to that standard. Can this gauge be used for incoming inspection and process control? Yes, the gauge is suitable for incoming goods inspection, in‑process sampling and final checks, providing a fast go/no‑go decision for M110 x 2.0 threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com