Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M110x2 Thread Go Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Benefit from the combination of hardened gauge steel, DIN 13, 6g conformity and an included calibration certificate for dependable thread inspection and repeatable results; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge GUT M110 x 2.0 — Go ring gauge for metric ISO fine thread, right‑hand (Metav IndustryLine) A precision thread ring gauge GUT M110 x 2.0 designed for reliable Go‑inspection of metric ISO fine threads in a right‑hand configuration, suitable for workshop and production control. Hardened gauge steel construction DIN 13, 6g standard compliance Supplied with calibration certificate Right‑hand metric fine thread M110×2 Built for repeatable thread inspection in production The ring is manufactured from hardened gauge steel, providing wear resistance and dimensional stability that keep tolerances consistent across repeated use. As a Go ring gauge, it confirms the minimum material condition and functional fit of internal threads quickly and unambiguously, reducing cycle times in inspection routines. The geometry follows DIN 13, 6g, ensuring compatibility with common metric ISO fine‑thread specifications and making the device suitable for systematic in‑process checks and final acceptance testing. Traceable accuracy and calibration promise for quality assurance Supplied with a calibration certificate, the gauge arrives ready for immediate use in quality control workflows with documented traceability. The certificate documents measured conformity to the specified limits and supports audit requirements in production environments. Because the tool is calibrated before delivery, traceability is simplified and measurement uncertainty is reduced, which helps to maintain process capability metrics and supports consistent part quality over time. Practical handling, workshop integration and inspection efficiency The compact yet robust design keeps handling straightforward while maintaining the required stiffness for dependable measurements. The size M110 x 2.0 is suitable for fine‑threaded components where precise engagement is essential; the right‑hand orientation matches standard fastening directions. Weight and form factor are optimised for both bench inspection and transfer between workstations, helping to streamline inspection stations without compromising accuracy. Durable surface and material selection mean fewer replacements and lower lifecycle disturbance to production. For traceable precision choose the Metav IndustryLine thread ring gauge and contact Metav Werkzeuge for tailored procurement and technical guidance: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M315.710.7 GTIN: 4054469153575 Material: Lehrenstahl, gehärtet Designation: Thread ring gauge GUT M 110 X 2,0 Standard: DIN 13, 6g Weight: 2 kg Customs tariff number: 90173000 Facts Thread size: M110 × 2.0 Right‑hand thread configuration Category: Lehren / Messgeräte Supplied with calibration certificate Special features Go (GUT) ring gauge for metric ISO fine threads Hardened gauge steel for wear resistance Conforms to DIN 13, 6g Delivered calibrated (calibration certificate included) FAQ What standard does the gauge conform to? The ring gauge is manufactured to DIN 13, 6g, ensuring compatibility with metric ISO fine‑thread specifications for reliable inspection. Is a calibration certificate included with the gauge? Yes — the product is supplied with a calibration certificate, documenting the measured conformity of the Metav IndustryLine ring gauge. What material is the gauge made from? The gauge is made from hardened gauge steel, chosen for dimensional stability and long‑term wear resistance. Is this a Go or No‑Go gauge? This item is a Go ring gauge (GUT) for acceptance checks of internal metric fine threads. Which thread size and hand does the gauge cover? The gauge checks M110 × 2.0 metric fine threads in a right‑hand configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x2 Thread Go Ring Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, a DIN 13, 6g tolerance class and a supplied calibration certificate for reliable thread verification in production or incoming inspection; order the calibrated ring gauge directly via Metav Werkzeuge or consult the technical team for specification support. Thread ring gauge M110×2.0 (right-hand) – Metav IndustryLine, calibrated Thread ring gauge M110×2.0 (right‑hand) for verification of metric ISO fine external threads in production and incoming inspection Supplied with calibration certificate Hardened gauge steel construction Conforms to DIN 13, 6g Ensure repeatable thread verification with traceable calibration A calibrated thread ring gauge provides a fast, objective check of external threads and reduces guesswork at the inspection bench. The supplied calibration certificate confirms traceability and documents measurement status for quality records, which supports audit requirements and process control. For an M110×2.0 metric ISO fine thread, this type of ring gauge removes subjective interpretation and speeds up routine checks while maintaining documented conformity. Robust build for long service life and consistent results The ring gauge is manufactured from hardened gauge steel, a choice that prioritises wear resistance and dimensional stability under repeated use. With a nominal size of M110×2.0 and tolerance class DIN 13, 6g, the component is suited to serial inspection of fine-pitch metric threads. The solid construction and balanced mass ensure that handling remains predictable; this improves reproducibility across shifts and operators and reduces the need for frequent replacement. Designed for integration into production inspection workflows As a precision control item, the calibrated ring gauge fits directly into incoming inspection, first-article checks and final verification steps. Clear labelling and the industry-aligned dimensions make it simple to reference in inspection plans and work instructions, reducing downtime caused by uncertainty. When stability and documented accuracy are required for batch release decisions, this instrument delivers measurable assurance and streamlines compliance with internal quality systems. Discuss calibration options or secure this calibrated M110×2.0 right‑hand ring gauge from Metav Werkzeuge for dependable thread inspection and documented traceability Technical data SKU: M315.810.7 GTIN: 4054469153780 Thread size: M110 × 2.0 Weight: 2 kg Material: hardened gauge steel Standard: DIN 13, 6g Tariff code: 90173000 Designation: AUSSCHUSS (ring gauge for metric ISO fine thread, right‑hand) Supplied with calibration certificate Facts Nominal size: M110 × 2.0 Tolerance class: 6g Direction: right‑hand thread Unit weight: 2 kg Special features Material: hardened gauge steel Calibration: supplied with certificate Application: verification of external metric ISO fine threads Categories: Gauges; Measuring devices (ring gauges) FAQ What is the primary use of this ring gauge? The ring gauge is intended for verification of external metric ISO fine threads, specifically M110×2.0, and is used in production and incoming inspection to confirm dimensional conformity. Is a calibration certificate included with delivery? Yes, the item is supplied with a calibration certificate, which provides traceable documentation of the measurement status. Which standard and tolerance class does the gauge follow? The gauge is made to DIN 13, 6g, a common tolerance class for metric ISO threads suitable for standard inspection tasks. What material is the gauge made from and how durable is it? The gauge is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated use. What is the product identifier for ordering or referencing? Reference SKU M315.810.7 for ordering and documentation; the GTIN is 4054469153780. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x3 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge steel construction, DIN 13 tolerance class 6H and an included calibration certificate, this Go thread plug gauge delivers reliable, repeatable verification of metric ISO fine internal threads. Order directly via Metav Werkzeuge or contact their consultants for specification advice. Go thread plug gauge M110 x 3.0 — metric ISO fine pitch, right-hand, Metav IndustryLine The Go thread plug gauge M110 x 3.0 is designed for fast, shop‑floor verification of metric ISO fine internal threads in production and quality control, suitable for right‑hand applications. Hardened gauge steel construction DIN 13 tolerance class 6H Supplied with calibration certificate Precise acceptance testing for fine-pitch threads This Go plug gauge is intended for acceptance checks that separate compliant parts from rejects with minimal effort. The M110 x 3.0 size and metric ISO fine pitch designation match standardised internal threads, while the Go plug gauge function verifies that the thread meets the required minimum material condition defined by the DIN 13 tolerance system. For production engineers and quality managers, this translates into a simple, objective pass/no‑pass decision that integrates directly into sampling plans and inspection routines. Durable construction that maintains accuracy Manufactured from hardened gauge steel, the gauge resists wear and preserves form down to repeated insertions, ensuring long service life in a busy workshop environment. The tolerance class 6H sets the nominal limits for the internal thread, and the right‑hand orientation addresses standard component designs. A stable, hardened construction reduces measurement drift and keeps performance predictable over time, supporting consistent process control without frequent replacement. Traceable calibration for quality assurance Delivered with a calibration certificate, the gauge arrives ready for use within a traceable quality system; traceability details are recorded on the document supplied. This certification supports audit requirements and simplifies record keeping for incoming inspection, in‑house quality control or supplier verification. The Metav IndustryLine provenance further underlines a workshop‑oriented supply chain that balances precision with availability, helping to keep inspection routines both reliable and efficient. For precise thread verification backed by traceable calibration, request the Metav IndustryLine Go thread plug gauge M110 x 3.0 through Metav Werkzeuge or consult their specialists for integration into existing quality processes. Technical data Article number: M315.510.8 GTIN: 4054469153995 Tariff code: 90173000 Weight: 2 kg Manufacturer: Metav IndustryLine Facts Thread size: M110 x 3.0 Pitch: 3.0 mm Tolerance class: 6H Orientation: Right‑hand Special features Material: hardened gauge steel Standard: DIN 13 Function: Go plug gauge for internal threads Delivery: includes calibration certificate FAQ What does the Go designation mean for this plug gauge? The Go designation indicates that the plug gauge verifies whether an internal thread meets the minimum acceptance dimensions; the Go thread plug gauge M110 x 3.0 confirms that the thread is within the lower limit allowed by the standard. Is a calibration certificate included with the gauge? Yes — the gauge is supplied with a calibration certificate that documents traceability and measurement results for audit and quality‑management purposes. Which standard does this gauge comply with? The gauge is specified to DIN 13 with tolerance class 6H, matching common specifications for metric ISO internal threads. What material is the gauge made from and why is that important? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that accuracy is maintained during repetitive use. Can this gauge be used for left‑hand threads? No — this item is manufactured for right‑hand threads; left‑hand variants must be specified separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x3 Thread Go/No-Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of standardised tolerances and a factory calibration certificate to make rejection decisions reproducible and audit-ready; the hardened gauge steel construction ensures longevity under repeated use. Order the ring gauge directly via Metav Werkzeuge or ask the consultants for application advice. No-go Thread Ring Gauge M110 x 3.0 (right-hand) — Metav IndustryLine The No-go Thread Ring Gauge M110 x 3.0 is designed to verify rejection limits for right‑hand metric ISO fine threads in production and incoming inspection. No-go ring gauge for M110 x 3.0 metric threads Hardened gauge steel for long service life Conforms to DIN 13, 6g tolerance class Supplied with calibration certificate Consistent rejection criteria that protect product quality A dedicated no-go ring gauge provides a fast, unequivocal decision at the inspection station: parts that fail to pass the gauge are rejected in line with documented tolerances. Built to the DIN 13, 6g specification, this tool defines the acceptable upper limits of pitch diameter for an ISO fine thread, removing operator interpretation and reducing the risk of non‑conforming assemblies reaching downstream processes. The measurable pass/fail approach speeds throughput and supports statistical process control without compromise. Robust construction for repeatable measurements and low life‑cycle costs Manufactured from hardened gauge steel, the ring offers resistance to wear and deformation even under frequent handling, which preserves its calibrated condition and extends service life. The right‑hand M110 × 3.0 geometry matches common fine‑threaded components in heavy machinery and large assemblies, enabling direct checks without adaptors. Minimal maintenance and stable geometry mean fewer interruptions for requalification, helping to lower total inspection cost and secure consistent repeatability across production batches. Traceable calibration for audit readiness and supplier assurance The gauge is supplied with a calibration certificate, giving clear traceability for quality records and audits. Documentation accompanies each unit to record its conformity at the time of delivery, simplifying acceptance by quality departments and integration into quality management systems. When traceable evidence is required for supplier control or contract compliance, the calibrated ring gauge provides the necessary proof without additional on‑site validation steps. For calibrated rejection control from Metav IndustryLine, contact Metav Werkzeuge to discuss the suitability of this ring gauge for a specific thread application or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.810.8 GTIN: 4054469154565 Thread size: M110 x 3.0 Hand: right‑hand Standard: DIN 13, 6g Weight: 2 kg Facts Nominal size: M110 x 3.0 Tariff number: 90173000 Materials / Special features Material: gauge steel, hardened Type: no‑go (reject) ring gauge Supplied with calibration certificate Category: gauges (Lehren) FAQ What does a no‑go thread ring gauge check? A no‑go ring gauge checks whether a threaded part exceeds the permitted maximum material limit; if the part does not pass the No-go Thread Ring Gauge M110 x 3.0, it is classed as a reject. Is the gauge supplied ready for use in quality documentation? Yes, the ring gauge is supplied with a calibration certificate, enabling immediate entry into inspection routines and quality records. Which standard does the gauge conform to? The ring gauge is manufactured to DIN 13, 6g for metric ISO fine threads, matching common engineering tolerance classes. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which maintains dimensional stability and wear resistance, ensuring reliable pass/fail results over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x3 Three-Point Thread Ring Gauge For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of M110×3 thread size, DIN 13 (6g) tolerance and hardened gauge steel for reliable go/no‑go inspection; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Gewinde-Lehrring GUT M110×3 — Metric ISO fine-thread go ring gauge, right-hand The Gewinde-Lehrring GUT M110×3 is a precision go ring gauge for right‑handed metric ISO fine threads, intended for process control and incoming inspection in production environments Calibrated with certificate included Hardened gauge steel construction DIN 13 tolerance class 6g For right‑hand metric fine threads Accuracy that protects production quality The calibrated go ring provides a straightforward, repeatable pass criterion for threaded parts, reducing ambiguity in visual or tactile checks. Manufactured from hardened gauge steel, the ring maintains form stability and resists wear during repeated use, which ensures long‑term repeatability in the inspection loop. Because the gauge conforms to DIN 13 with tolerance class 6g, it aligns with common international acceptance standards for metric fine threads, enabling consistent decisions at the goods‑in point or on the shop floor. Efficient inspection workflow and traceability Using a dedicated ring gauge accelerates inspection throughput compared with time‑consuming micrometric fits. The compact test method — insert the mating part into the M110×3 go ring — gives an immediate go/no‑go outcome, helping to prevent downstream rework and machine downtime. The supplied calibration certificate documents conformity at delivery and supports traceability for quality records, making the gauge suitable for use in production control, incoming inspection and audit situations. Materials and handling benefits The use of hardened gauge steel delivers stability under repeated mechanical contact and reduces the need for frequent replacement; this translates into lower lifecycle costs and predictable inspection intervals. The gauge’s geometry is optimised for reliable seating on threads and for easy handling during routine checks. As a functional 'go' gauge for right‑hand threads, it complements complementary 'no‑go' gauges in a full inspection set-up and simplifies go/no‑go strategies without requiring elaborate measuring instruments. Practical fit for workshop and quality labs Designed for industrial metrology and workshop use, the ring is compact to store yet robust in service. Its nominal identification and traceable GTIN make inventory and documentation straightforward. For organisations seeking pragmatic, standards‑based inspection tools, this gauge represents a low‑complexity instrument that integrates with established inspection procedures and quality systems while supporting fast decision making at assembly, inspection and maintenance stations. Contact Metav Werkzeuge in Emmerich for procurement guidance or to arrange delivery of the calibrated M315.710.8 ring gauge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.710.8 GTIN: 4054469154374 Weight: 2 kg Thread size: M110×3 Standard: DIN 13, tolerance 6g Material: hardened gauge steel Right‑hand thread Type: 'Go' ring gauge (GUT) Calibration certificate included Tariff number: 90173000 eCl@ss: 21170214 Core technical data Mass designation: M110x3 Weight in kg: 2 Tolerance class: 6g GTIN code: 4054469154374 Special features Calibrated on delivery with certificate Robust hardened gauge steel construction Intended for metric ISO fine threads Designed for repeatable go/no‑go checks FAQ What is the purpose of the Gewinde-Lehrring GUT M110×3? The Gewinde-Lehrring GUT M110×3 is a calibrated go ring gauge used to check conformity of right‑hand metric fine threads to DIN 13 tolerance class 6g Is a calibration certificate supplied with the ring gauge? Yes, the ring gauge is delivered with a calibration certificate confirming inspection at delivery What material is the ring gauge made from and why does it matter? The ring is made from hardened gauge steel, which ensures dimensional stability and extended service life under repeated inspections Can the ring gauge be used for laboratory and shop‑floor inspections? The M315.710.8 ring gauge suits both workshop control points and quality laboratory checks, offering a quick go/no‑go criterion for production and incoming inspection Does the product comply with recognised thread standards? The gauge is manufactured to DIN 13 and marked for tolerance class 6g, aligning with standard metric ISO fine‑thread specifications Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x4 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, precise M110 x 4.0 metric ISO fine-thread sizing and an included calibration certificate for reliable in-process inspection; order the go thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go thread plug gauge M110 x 4.0 – Metric ISO fine thread, right-hand by Metav IndustryLine The Go thread plug gauge M110 x 4.0 is a right-hand plug gauge designed to verify metric ISO fine-thread form and basic size in production and incoming inspection. Hardened gauge steel construction Metric ISO fine thread M110 x 4.0 Delivered with calibration certificate DIN 13 tolerance class 6H Consistent conformity for threaded parts The go plug gauge verifies internal threads quickly and unambiguously, checking form and size against the metric ISO fine-thread standard. Manufactured from hardened gauge steel, the gauge provides robust resistance to wear so that the acceptance decision remains reproducible over many cycles. The datum conformity to DIN 13, 6H ensures compatibility with common engineering tolerances, reducing ambiguity during acceptance testing and supporting a predictable production flow. Speed and reliability in inspection workflows Designed for direct use at the inspection bench or on the shop floor, this plug gauge simplifies pass/fail checks and reduces measurement time compared with complex tactile methods. The axial fit for the M110 x 4.0 thread gives an immediate go/no-go result, enabling faster sorting and fewer downstream rejects. The relatively compact mass contributes to straightforward handling and safe manual checking, improving throughput without sacrificing inspection quality. Traceability, durability and supply assurance Delivered with a traceable calibration certificate, the tool supports documented quality procedures and audit requirements; the calibration document accompanies the gauge and confirms its readiness for calibrated inspection tasks. The hardened construction and standard-compliant geometry lower lifecycle costs through reduced regrinding frequency, while the clear designation as a right-hand metric ISO fine-thread gauge aids storage and reuse in mixed-tool environments. Contact Metav Werkzeuge for tailored advice on thread acceptance criteria and to arrange supply of the Metav IndustryLine go thread plug gauge complete with calibration certificate Technical Data Article number: M315.510.9 GTIN: 4054469154756 Net weight: 2 kg Material: Gauge steel, hardened Thread size: M110 x 4.0 Standard: DIN 13, 6H Tariff number: 90173000 Facts Type: Go thread plug gauge Thread hand: Right-hand Category: Gauges / Plug gauges Delivery: Includes calibration certificate Special features Suitable for verification of metric ISO fine threads Durable hardened construction for long service life Clear pass/fail inspection method Traceable calibration for quality documentation FAQ What does the go plug gauge check? The go plug gauge checks thread form and basic size for the M110 x 4.0 metric ISO fine thread to DIN 13, verifying that an internal thread meets the defined acceptance criteria. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate confirming the inspection status at delivery. Which thread tolerance is this gauge manufactured to? The gauge corresponds to DIN 13, 6H for metric ISO threads, suitable for standard fine-thread acceptance testing. Can this gauge be used for left-hand threads? No, this specific item is a right-hand go plug gauge; left-hand threads require a corresponding left-hand gauge. What is the material and durability expectation? Made from hardened gauge steel, the gauge is designed to withstand routine inspection use and to offer extended service life under normal handling conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x4 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened, right‑hand No‑go thread plug gauge designed for metric ISO fine threads and supplied with a calibration certificate; its conformity to DIN 13, 6H ensures reliable pass/fail decisions on threaded production parts. Order directly via Metav Werkzeuge or contact our advisors for specification checks and delivery options. Thread plug gauge (No‑go) M110×4.0 — metric ISO fine thread plug gauge, right‑hand, Metav IndustryLine A Thread plug gauge (No‑go) M110×4.0 intended for rapid pass/fail inspection of metric ISO fine threads in production and quality assurance environments No‑go (reject) thread plug gauge Metric fine thread M110 × 4.0 Hardened gauge steel construction Supplied with calibration certificate Ensure repeatable rejection criteria for threaded parts The No‑go plug serves as a simple, fast method to identify non‑conforming internal threads where a precise rejection limit is required. Made from hardened gauge steel, the gauge resists wear and maintains a stable reference profile, which translates into fewer false rejects and reduced rework. Conformity to DIN 13, 6H gives a clear normative basis for assessment, allowing production staff and inspectors to apply a consistent acceptance rule without elaborate measurement equipment. Minimise downtime with clear pass/fail control Using a dedicated No‑go gauge reduces inspection time and simplifies operator decisions: if the gauge does not enter, the thread meets the acceptable limit; if it enters, the part is rejected. This direct method shortens inspection cycles in high‑volume runs and supports process stability by providing immediate feedback to machining processes. The robust construction and clear functional definition help to protect throughput while preserving component quality. Traceability and compliance for quality systems Delivered with a calibration certificate, the plug gauge supports traceability requirements within quality management systems. The certificate documents the gauge condition at delivery, enabling easy integration into calibration schedules and internal audits. For companies that require demonstrable measurement controls, the combination of a standard‑compliant gauge and documented calibration reduces uncertainty and strengthens audit readiness. Contact Metav Werkzeuge for specification verification, calibration documentation and prompt supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M315.610.9 GTIN: 4054469154930 Customs tariff number: 90173000 Weight: 2 kg Facts Thread size: M110 × 4.0 Tolerance/class: 6H (DIN 13) Right‑hand thread Material: Gauge steel, hardened Special features Type: No‑go (reject) plug gauge Supplied with calibration certificate Category: Gauges / Plug gauges Standard: DIN 13, 6H FAQ What is the purpose of a No‑go plug gauge? A No‑go plug gauge is intended to check whether an internal thread exceeds the maximum acceptable limits; the Thread plug gauge (No‑go) M110×4.0 enters only when the thread is out of tolerance and thus signals rejection. Is the gauge delivered ready for use in inspection routines? Yes, the tool is supplied with a calibration certificate, so the Metav IndustryLine Thread plug gauge (No‑go) M110×4.0 can be integrated into inspection procedures with documented traceability. Which standard does the plug gauge follow? The plug gauge complies with DIN 13, 6H, providing a recognised tolerance class for metric ISO fine threads and a clear reference for pass/fail decisions. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that thread checks remain reliable over repeated use. How does the No‑go gauge support production quality? By delivering an unequivocal reject criterion, the gauge reduces uncertainty on the shop floor and supports consistent process control; the M315.610.9 No‑go plug gauge helps to prevent non‑conforming parts from progressing through assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x4 Thread Go/No-Go Ring For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge‑steel construction and DIN‑compliant tolerances to keep production rejects identifiable and process control tight; the right‑hand M110 x 4.0 no‑go thread ring is supplied with a calibration certificate for traceability. Order the gauge directly via Metav Werkzeuge or consult Metav’s specialists for application support. No‑go Thread Ring Gauge M110 x 4.0 — Right‑hand (DIN 13, 6g) by Metav IndustryLine The No‑go Thread Ring Gauge M110 x 4.0 is a hardened ring gauge for verifying rejection limits on metric ISO fine threads in production and incoming inspection environments. Hardened gauge steel for durability Designed for M110 x 4.0 metric fine threads Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Ensure threads fail correctly, not unexpectedly The primary function of this no‑go ring is to identify threads that exceed the acceptable size envelope so that flawed parts are removed before assembly. Manufactured to DIN 13 with a 6g tolerance, the ring provides a clear go/no‑go decision at a glance: a correct thread will not accept the no‑go ring, while an oversized or out‑tolerance thread will. This unambiguous check reduces ambiguous measurements and shortens inspection cycles, improving throughput and safeguarding downstream assembly operations. Built for repeatable shop‑floor use and traceability Constructed from hardened gauge steel, the component is dimensionally stable and resists wear under frequent use, maintaining measurement integrity over many cycles. The ring is supplied with a calibration certificate, documenting traceability and enabling integration into quality systems and audit trails. Supplied mass is approximately 2 kg, which supports robust handling without being unwieldy on the inspection bench. The hardened material and calibration together help to lower the risk of false acceptance and to maintain consistent quality across batches. Simple integration into inspection routines for production control As a dedicated reject (no‑go) gauge for M110 x 4.0 right‑hand threads, this tool slots into existing inspection plans with minimal training: add the ring to incoming checks, batch sampling or final inspection routines to catch oversize threads early. The clear mechanical pass/fail nature of the check accelerates decisions and reduces the need for repeated dimensional measurements on CMMs for routine screening. Metav IndustryLine’s gauge supports a lean quality approach by enabling rapid, reliable checks that protect assembly fit and product performance. For reliable batch control and documented traceability order the Metav IndustryLine M110 x 4.0 no‑go thread ring through Metav Werkzeuge — expert advice and delivery are available from the Emmerich team at Metav Werkzeuge Technical Data Article number: M315.810.9 GTIN: 4054469155296 Label: No‑go thread ring M110 x 4.0, right‑hand Facts Size: M110 x 4.0 Weight: 2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Thread standard: DIN 13, tolerance 6g Type: no‑go / reject ring gauge for metric ISO fine threads Supplied with calibration certificate FAQ What is the purpose of a no‑go thread ring gauge? A no‑go thread ring gauge provides an immediate pass/fail check; the Metav IndustryLine no‑go ring for M110 x 4.0 identifies oversize or out‑tolerance threads that must be rejected. Is a calibration certificate included with the gauge? Yes, the ring is supplied with a calibration certificate that documents traceability and supports quality records for inspection and audits. Which standard does the gauge comply with? The ring is manufactured to DIN 13 and specified for a 6g tolerance class for metric ISO fine threads. Can the gauge be used on left‑hand threads? This item is a right‑hand gauge; left‑hand threads require the corresponding left‑hand gauge or a dedicated tool. How does the ring help reduce inspection time? The mechanical go/no‑go check eliminates the need for repeated dimensional measures during routine screening, enabling faster batch decisions and fewer hold‑ups in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x6 Thread Go Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened, standards‑compliant inspection tool that ensures clear go/no‑go decisions and traceable results; the combination of hardened gauge steel, DIN 13 (6g) tolerance class and a supplied calibration certificate streamlines in‑process checks and quality gates. Order the gauge directly via Metav Werkzeuge or consult the specialists if further clarification is required. Thread ring gauge (No‑Go) M110 x 6.0 — Metav IndustryLine Thread ring gauge (No‑Go) M110 x 6.0 for checking metric ISO fine threads (right‑hand), intended for production and incoming inspection to verify compliance with DIN 13 (6g) No‑go ring gauge for M110 x 6.0 Hardened gauge steel construction DIN 13 (6g) tolerance class Delivered with calibration certificate Reliable conformity checks that reduce rework and scrap A dedicated no‑go ring gauge provides an immediate binary decision during inspection: pass or reject. Manufactured to the DIN 13 (6g) specification, this ring gauge converts thread geometry into a simple, reproducible check that fits directly into assembly control plans and first‑off inspections. The hardened construction minimises wear, so the instrument sustains its dimensional integrity across repeated use; this reliability reduces downstream rework and supports stable production throughput. The factual basis for acceptance and rejection reduces ambiguity in quality reports and simplifies auditor checks. Robust design for repeatable handling in the workshop Constructed from hardened gauge steel, the ring gauge combines stiffness with resistance to wear, making it suited to frequent use at inspection benches or on the shop floor. The right‑hand metric fine thread form M110 x 6.0 is realised in a compact, serviceable ring that can be handled without complex fixtures, enabling fast checks on turned or forged components. The weight and form factor are engineered for stable engagement; by avoiding deformation during the test, repeatability of the measurement is preserved and operator‑to‑operator variance is minimised. Traceability and documented accuracy for quality systems Delivery includes a calibration certificate, providing documentary evidence for traceability and audit requirements; the certificate supports integration into quality management systems and helps maintain inspection records. As a standards‑based gauge intended for go/no‑go inspection, it supports short inspection cycles and decisive quality gates on the production line. Sourcing through Metav IndustryLine gives access to a European supply chain and the practical logistics of a dedicated quality filter; this contributes to dependable stock levels and verified product provenance for industrial customers. Consult Metav Werkzeuge for the calibrated Metav IndustryLine no‑go ring gauge to secure traceable and standards‑compliant inspections for metric ISO fine threads Technical Data SKU: M315.810.A GTIN: 4054469155869 Weight: 2 kg Country tariff number: 90173000 Core specifications Thread size: M110 x 6.0 Tolerance class: 6g (DIN 13) Type: No‑Go (reject) ring gauge Handing: right‑hand thread Special features Material: gauge steel, hardened Delivered with calibration certificate Brand: Metav IndustryLine Intended use: go/no‑go inspection of metric ISO fine threads FAQ What thread standard does this gauge verify? The thread ring gauge M110 x 6.0 verifies metric ISO fine threads to DIN 13 with tolerance class 6g for decisive go/no‑go inspection. Is a calibration certificate supplied with the gauge? Yes, the Metav IndustryLine M110 x 6.0 gauge is supplied with a calibration certificate to support traceability and quality documentation. Can the gauge be used for left‑hand threads? No, this ring gauge is manufactured for right‑hand threads only and is intended for M110 x 6.0 metric fine‑pitch applications. What material is the ring gauge made from? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated checking. What is the purpose of a no‑go ring gauge in production? A no‑go ring gauge confirms whether a thread exceeds allowable limits; engagement of the no‑go indicates the thread is out of tolerance and should be rejected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x6 Thread Go Ring Gauge Metric ISO Fine Pitch Right Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a purpose-built Go ring gauge that combines hardened gauge steel construction and conformity to DIN 13, 6g for dependable in-process thread inspection; order directly via Metav Werkzeuge or consult Metav's specialists for application advice. Go Ring Gauge M110 × 6.0 — ISO metric fine thread, right‑hand (Metav IndustryLine) Go Ring Gauge M110 × 6.0 is a precision inspection ring designed for verifying right‑hand ISO metric fine threads in production and quality control environments. Includes calibration certificate Hardened gauge steel construction Conforms to DIN 13, 6g Designed for right‑hand ISO metric fine thread Reliable pass/fail verification for fine threads The Go ring gauge for M110×6.0 provides a fast, binary check that confirms whether a threaded external part meets the specified profile and pitch class. Using a Go/No‑Go strategy minimises interpretation and speeds up the inspection loop; parts that pass the Go ring require no further thread-profile measurement for acceptance. The gauge’s geometry follows the DIN 13, 6g profile, ensuring compatibility with ISO metric fine threads and predictable interchangeability across suppliers and processes. Robust materials and conformity that reduce downtime Manufactured from hardened gauge steel, this ring gauge resists wear and maintains its measuring edge over extended production runs, which reduces the frequency of replacement and recalibration. Delivery includes a calibration certificate, documenting traceable verification at dispatch; this supports batch traceability and quality records without additional paperwork. The robust material choice and compliance with established standards mean fewer unexpected rejects and a steadier production flow. Practical handling and workplace integration Weighing 2.5 kg and offered as a dedicated ring gauge, this inspection tool fits readily into established measuring stations or dedicated gauging fixtures. The solid design facilitates rapid tactile checks on the shop floor while the included certificate simplifies quality assurance documentation. For users implementing short-cycle checks or incoming goods inspection, the gauge streamlines decisions and integrates with existing quality processes, providing a reliable go/no‑go outcome without complex measurement setups. Contact Metav Werkzeuge for tailored advice on integrating the M110×6.0 ring gauge into inspection plans or to confirm current stock and delivery options from Emmerich Technical data Article number: M315.710.A GTIN: 4054469155739 ECLASS: 21170214 Tariff number: 90173000 Weight: 2.5 kg Facts Thread size: M110 × 6.0 Tolerance class: 6g Right‑hand thread Standard: DIN 13, 6g Special features Hardened gauge steel Delivered with calibration certificate Category: Go ring gauge for ISO metric fine thread Intended for thread inspection and production control FAQ What is the intended use of this ring gauge? The Go ring gauge M110 × 6.0 is intended for pass/fail verification of external ISO metric fine threads, providing rapid inspection in production and incoming goods control. Is a calibration certificate supplied with the gauge? Yes, the ring gauge is supplied with a calibration certificate that documents the verification status at dispatch. Which standard does the gauge conform to? The gauge conforms to DIN 13, tolerance class 6g, matching the profile requirements for ISO metric fine threads. Can this gauge be used for left‑hand threads? No, this particular ring gauge is manufactured for right‑hand ISO metric fine threads only. How does the gauge affect shop‑floor throughput? Using the Go ring gauge reduces decision time for threaded parts by providing an immediate pass/fail result, supporting faster cycle times and consistent quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x6 Thread Go/No-Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a decisive go/no-go inspection tool combined with hardened construction and a traceable calibration certificate to keep thread production and incoming inspection both fast and dependable. Order directly via Metav Werkzeuge or consult the team for tailored inspection routines. No-Go Thread Plug Gauge M110 x 6.0 — metric ISO fine thread, right-hand (Metav IndustryLine) A No-Go thread plug gauge M110 x 6.0 intended for fast verification of metric ISO fine internal threads where clear go/no-go assessment is required in production and quality control. *No-Go plug gauge for M110 x 6.0 threads *Hardened gauge steel construction *Conforms to DIN 13, tolerance 6H *Includes calibration certificate Faster decision-making at the control station The No-Go design provides an immediate, unambiguous indication of out-of-tolerance internal threads: if the M110 x 6.0 plug gauge enters, the thread must be rejected. Manufactured from hardened gauge steel, the gauge resists wear and preserves dimensional integrity over repeated cycles, reducing uncertainty in routine inspections. Compliance with DIN 13 and the 6H tolerance class means the instrument matches established metric-thread standards, so measurement decisions are backed by recognised norms and repeatable mechanics. Traceability and documented calibration for audit readiness Supplied with a calibration certificate, the gauge supports documented measurement processes and audit trails required in industrial quality schemes. The included certificate confirms the inspection condition at dispatch and facilitates integration into existing quality documentation. Traceable verification helps limit rework and avoids ambiguous acceptance decisions, turning inspection into a verifiable, low-risk step in the production chain rather than a bottleneck. Practical footprint for shop-floor use and incoming goods checks As a right-hand thread plug gauge, the tool is optimised for quick threaded-entry checks on internal bores and nuts. The robust construction and compact handling make routine checks efficient for both incoming goods inspectors and production staff, minimising machine downtime. The clear pass/fail principle reduces interpretation time and supports consistent quality across shifts and operators, contributing to a stable production flow and fewer customer complaints. Contact Metav Werkzeuge for tailored advice on thread-quality controls and to secure this Metav IndustryLine No-Go gauge for consistent inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.610.A GTIN: 4054469155609 Material: gauge steel, hardened Standard: DIN 13, 6H Thread size: M110 x 6.0, right-hand Weight: 2 kg Tariff number: 90173000 Special note: included calibration certificate Facts Type: No-Go thread plug gauge Intended use: inspection of metric ISO fine internal threads Brand: Metav IndustryLine Category: Gauges / Thread inspection SKU: M315.610.A Special features Supplied with calibration certificate Robust, wear-resistant hardened steel Clear go/no-go assessment for fast decisions FAQ What is the function of a No-Go thread plug gauge? A No-Go thread plug gauge is used to detect undersized or otherwise non-conforming internal threads; if the No-Go thread plug gauge M110 x 6.0 enters the thread, the part must be rejected. Is a calibration certificate included with this gauge? Yes, this Metav IndustryLine plug gauge is supplied with a calibration certificate to document the gauge condition at delivery and support traceability. Which thread standard does the gauge comply with? The gauge is manufactured to DIN 13 for metric threads with tolerance 6H, matching common industrial thread specifications. Can this gauge be used in incoming goods inspection? Yes, the M110 x 6.0 No-Go gauge is suitable for incoming inspection and production checks where rapid acceptance or rejection of internal threads is required. What material is the gauge made from and why does it matter? The plug gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability over repeated use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110x6 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand Calibrated DIN 13 6H - Metav IndustryLine
The combination of hardened gauge steel, DIN 13, 6H tolerance and an included calibration certificate ensures fast, reliable go/no‑go checks for metric fine threads; deliverable traceability supports quality processes. Order the thread plug gauge GUT M110 x 6.0 directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge GUT M110 x 6.0 – right‑hand metric fine thread, calibrated The GUT M110 x 6.0 thread plug gauge is a right‑hand, metric fine‑thread inspection gauge designed for go/no‑go verification of externally produced threads in production and incoming inspection. Supplied with calibration certificate Hardened gauge steel construction DIN 13, tolerance class 6H Right‑hand metric fine thread M110×6 Fast compliance checks for production control The plug gauge provides an efficient go/no‑go inspection method that reduces measurement time during serial production. Manufactured from hardened gauge steel, the gauge resists wear and maintains form over repeated use, which preserves dimensional integrity and reduces rework. The clear distinction between acceptable and out‑of‑tolerance threads simplifies operator decisions and integrates with established quality control routines to keep throughput consistent. Traceable accuracy that supports quality systems Delivered with a calibration certificate, the gauge supplies documented traceability for audits and process documentation. The DIN 13, 6H specification ensures compatibility with standard metric fine threads, enabling consistent acceptance criteria across suppliers and production lines. Using a calibrated inspection tool minimises variability introduced by subjective gauging and supports documented inspection records for internal quality assurance and external compliance. Robust design for workshop and inspection lab use The robust construction and the nominal designation M110 x 6.0 make the gauge suitable for heavy‑duty workshop usage as well as controlled inspection environments. The right‑hand configuration matches common thread production, while the compact, solid design assists repeatable seating and quick tactile verification. The gauge’s balanced weight aids stable handling and helps ensure reproducible engagement with the component thread. For guaranteed traceability and to integrate this Metav IndustryLine thread plug gauge into inspection routines, request the GUT M110 x 6.0 via Metav Werkzeuge or consult our specialists at +49 2822 7131930 / info@metav-werkzeuge.com Technical data Article number: M315.510.A GTIN: 4054469155470 Category: Gauges / Thread gauges Numbers Nominal diameter: 110 mm Thread pitch: 6.0 mm Weight: 2.5 kg Tariff number: 90173000 Special features Material: Lehrenstahl, hardened Tolerance / standard: DIN 13, 6H Hand: Right‑hand thread Supplied with calibration certificate FAQ What is the intended use of this plug gauge? The thread plug gauge GUT M110 x 6.0 is intended for go/no‑go verification of externally produced metric fine threads in production testing and incoming inspection. Does the gauge come with traceable calibration documentation? Yes, the gauge is supplied with a calibration certificate that documents traceability and supports quality records for the Metav IndustryLine thread plug gauge (SKU M315.510.A). Which standard and tolerance class does the gauge comply with? The gauge complies with DIN 13 and is manufactured to the 6H tolerance class for metric threads. Is this suitable for heavy workshop use? The hardened gauge steel construction ensures wear resistance suitable for workshop and inspection lab environments while maintaining repeatable results. What thread geometry is covered by the gauge? The item checks a right‑hand metric fine thread with nominal size M110 x 6.0, matching standard internal/external thread production for that designation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110×2.0 Thread Go Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combine the hardened gauge-steel construction with DIN 13, 6H conformity and the supplied calibration certificate for repeatable thread inspection; order the Thread plug gauge GUT M110 x 2.0 directly via Metav Werkzeuge or consult the specialists for application advice. Thread plug gauge GUT M110 x 2.0 — Go plug gauge for metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge GUT M110 x 2.0 is a dedicated go plug gauge for rapid verification of internal metric ISO fine threads in production and quality‑control environments. Go plug gauge for M110 x 2.0 Hardened gauge steel construction Conforms to DIN 13, 6H; calibration certificate included Reliable inspection to prevent downstream rework A dedicated go plug gauge offers a fast, unambiguous check that internal threads meet the required form and size. Manufactured from hardened gauge steel, this gauge provides the stiffness and wear resistance needed for repeated use on the shop floor. Conformity with DIN 13, 6H ensures that the gauge checks the nominal size and tolerance band defined for metric fine threads, making acceptance decisions straightforward and traceable. The direct consequence is fewer false rejects and reduced downstream rework. Traceable quality through documented calibration Delivered with a calibration certificate, the gauge supports documented measurement routines and audit trails in production control. The certificate confirms the gauge's status at the time of delivery and allows integration into existing quality-management systems. For companies that require documented measurement evidence, using a calibrated plug gauge reduces uncertainty and simplifies inspection records, supporting efficient quality assurance processes. Practical benefits in everyday production use Designed as a right‑hand go plug gauge for M110 × 2.0, the device is compact to handle and robust enough for frequent checks of threaded bores. The single‑feature design (go only) speeds up routine checks where a go/no‑go system is already established; where a go-only check suffices, throughput is improved without compromising safety margins. The gauge’s balanced mass and hardened finish contribute to low maintenance and stable performance over many inspection cycles. Contact Metav Werkzeuge in Emmerich for availability, calibration details and suitability advice for the Metav IndustryLine go plug gauge M315.510.7 Technical Data Article number: M315.510.7 GTIN: 4054469152981 Nominal thread: M110 x 2.0 Material: Gauge steel, hardened Standard: DIN 13, 6H Weight: 2 kg Orientation: Right-hand Calibration: Calibration certificate included Facts Nominal size: M110 Pitch: 2.0 mm Tolerance class: 6H Tariff code: 90173000 eClass: 21170228 Special features Go plug gauge (GUT) for metric ISO fine threads Hardened gauge steel for wear resistance Supplied with calibration certificate Category: Gauges / Plug gauges FAQ What is the primary purpose of this plug gauge? The plug gauge is intended for pass/fail verification of internal metric ISO fine threads; the M110 x 2.0 go gauge confirms that threaded bores meet the specified nominal size and tolerance class. Is a calibration certificate supplied with the gauge? Yes, the gauge is delivered with a calibration certificate that documents its measurement status at delivery and supports quality records. Which standard does the gauge comply with? The gauge is manufactured to check threads against DIN 13 with a tolerance class of 6H, suitable for standard metric fine‐thread inspections. Can this gauge be used for left‑hand threads? No, this item is a right‑hand go plug gauge; left‑hand threads require a specifically manufactured left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110×3 Thread Plug Gauge Metric ISO Fine Pitch Right-Hand Calibrated, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of fast rejection checks, hardened gauge‑steel construction and a traceable calibration certificate for reliable thread control in production. Order the Thread plug gauge NO‑GO M110 x 3.0 directly via Metav Werkzeuge or ask the consultants if technical advice is required. Thread plug gauge NO‑GO M110 x 3.0 — metric ISO fine thread, right‑hand The Thread plug gauge NO‑GO M110 x 3.0 is a right‑hand no‑go gauge designed for quick verification of metric ISO fine internal threads in production, quality control and incoming inspection. No‑go plug gauge for M110 x 3.0 Hardened gauge steel construction Supplied with calibration certificate Ensure fast, reliable rejection at the workbench A dedicated no‑go plug is the quickest way to detect out‑of‑tolerance internal threads without time‑consuming measurements. The compact testing method delivers an immediate pass/fail result, reducing rework and preventing faulty assemblies from continuing down the process. Matched to DIN 13, 6H, this tool provides a standardised acceptance criterion for metric ISO fine threads, so inspection steps become reproducible and auditable. The hardened construction resists wear, keeping the tolerance boundary stable over many cycles and maintaining inspection consistency. Minimise downtime with a robust inspection routine Designed for repetitive use on the shop floor, the gauge combines simple handling with long‑term durability. The hardened gauge steel body gives mechanical resistance against knocks and abrasion, while the right‑hand geometry matches the thread form it controls. Its single‑function nature speeds operator action: insert the plug to check; if the gauge enters, the thread is out of specification. This clarity supports efficient lineside decisions and contributes to a steady production flow by avoiding ambiguous measurement sequences. Traceability and conformity for documented quality control Delivered with a calibration certificate, the gauge supports documented quality processes and material traceability. The certificate accompanies the tool and confirms its measurement status at delivery, simplifying initial equipment records and audit trails. The item’s construction and marking also permit long‑term identification within an inspection set. For shops that value reproducible results and documented conformity, this reject gauge offers a straightforward, standards‑aligned solution that integrates into existing quality routines. Contact Metav Werkzeuge today to confirm suitability of the M110 x 3.0 no‑go plug gauge for the intended thread class and to request delivery alongside other inspection aids from Metav IndustryLine Technical Data Article number: M315.610.8 GTIN: 4054469154183 Description: Thread plug gauge NO‑GO M110 x 3.0, right‑hand Facts Thread size: M110 x 3.0 Standard: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Type: no‑go (reject) plug gauge Right‑hand thread Supplied with calibration certificate FAQ What does "AUSSCHUSS" mean in practical terms? AUSSCHUSS denotes a no‑go or reject gauge; the plug checks whether an internal thread exceeds the allowable limit and, if the gauge enters, the thread is rejected. Is a calibration certificate included with this gauge? Yes, the Thread plug gauge NO‑GO M110 x 3.0 is supplied with a calibration certificate, which documents the gauge status at delivery and supports traceability. Which thread standard is the gauge made for? The tool conforms to DIN 13, 6H for metric ISO fine threads and is specified for the M110 x 3.0 size and pitch. What material is used and how does it affect durability? Manufactured from hardened gauge steel, the gauge resists wear and maintains the defined limit dimension over many inspection cycles. Can this gauge be used for left‑hand threads? No; this item is produced as a right‑hand no‑go plug and is suitable only for right‑hand internal threads of the specified size. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M110×4 Thread Go Ring Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Taking advantage of hardened gauge steel and conformity to DIN 13, 6g, this Go thread ring provides fast, repeatable checks for fine‑pitch metric threads; supplied with a calibration certificate for traceable inspection results. Order the thread gauge directly via Metav Werkzeuge or consult their specialists for application advice. Thread ring gauge GUT M110 x 4.0 – Metric ISO fine‑thread Go gauge (right‑hand), Metav IndustryLine The thread ring gauge GUT M110 x 4.0 is a Go (GUT) ring for quick verification of metric ISO fine threads in production and quality control, designed for right‑hand threads and workshop use Hardened gauge steel construction Conforms to DIN 13, 6g tolerance Go gauge for M110 x 4 metric fine thread Delivered with calibration certificate Fast, reliable Go/No‑Go inspection for production The thread ring gauge enables immediate Go checks on assemblies and machined components, reducing inspection time compared with setting up gauge blocks or measuring thread profiles. As a Go gauge, it confirms that external threads fall within the permissible maximum material condition, allowing rapid acceptance of parts on the shop floor. The compact handling and simple pass/fail result support streamlined workflows and fewer process interruptions, which is especially valuable in repetitive inspection tasks and high‑throughput environments. Durable construction matched to industry standards Manufactured from hardened gauge steel, the ring resists wear and maintains functional limits over prolonged use, contributing to consistent measurement outcomes and lower lifetime cost. The product adheres to DIN 13 with a 6g tolerance class, ensuring compatibility with standard ISO metric fine‑thread specifications and simplifying acceptance criteria across suppliers and customers. Robust material and standard conformity together reduce uncertainty in thread verification and extend service intervals between re‑calibrations. Traceable calibration and quality assurance The gauge is supplied with a calibration certificate, providing documented traceability for quality systems and audit trails. The attached certificate confirms the measurement status at delivery and supports integration into internal control plans and inspection records. This traceability enhances process reliability and confidence during incoming inspection, final checks or when evidencing conformity to contractual or regulatory requirements. Choose the Metav IndustryLine thread ring gauge for dependable Go checks — contact Metav Werkzeuge in Emmerich for procurement advice, calibration documentation and delivery information Technical Data Article number: M315.710.9 GTIN: 4054469155111 Designation: Thread ring gauge GUT M110 x 4.0 Material: hardened gauge steel Standard: DIN 13, 6g Mass: 2 kg Tariff number: 90173000 Facts Size: M110 x 4.0 Type: Go (GUT) ring gauge, right‑hand Calibration: certificate included ECLASS: 21170214 Special features Delivered with calibration certificate Right‑hand metric ISO fine‑thread check Category: Gauges; Measuring pins Suitable for production and quality control inspections FAQ What does the GUT marking mean for this gauge? The GUT designation indicates a Go gauge function: the thread ring gauge GUT M110 x 4.0 verifies that external threads meet the permissible maximum material condition for M110 x 4 metric fine threads. Is a calibration certificate supplied with the gauge? Yes, the Metav IndustryLine ring is supplied with a calibration certificate for traceability and audit purposes. Which standard and tolerance class apply to this gauge? The ring conforms to DIN 13 and the 6g tolerance, matching standard ISO metric fine‑thread specifications. What material is used for the gauge and how does that affect durability? Manufactured from hardened gauge steel, the gauge offers high wear resistance and stable functional limits, extending the service life under regular inspection use. Can this gauge be used for left‑hand threads? No, this particular item is specified for right‑hand threads; left‑hand versions must be ordered separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x1.5 Thread Go Plug Right-Hand For Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Reliable thread inspection is achieved through a combination of hardened gauge steel construction, precise DIN 13, 6H tolerance and an included calibration certificate, which together ensure repeatable acceptance testing for metric fine threads; use this plug gauge to reduce rework and secure process reliability. Order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge GUT M112×1.5 (right-hand) — hardened gauge steel, DIN 13 6H (Metav IndustryLine) The Thread plug gauge GUT M112×1.5 is a right-hand inspection gauge designed for acceptance testing and routine verification of metric ISO fine internal threads in production and quality control environments. Hardened gauge steel construction DIN 13, 6H tolerance class Supplied with calibration certificate Right-hand metric fine thread M112×1.5 Ensure correct thread form and fit on the shop floor The plug gauge provides a fast, unambiguous method for checking internal threads against the DIN 13, 6H tolerance band. Manufactured from hardened gauge steel, the gauge resists wear and preserves dimensional integrity during repeated use, which reduces the need for frequent replacements and keeps inspection throughput high. By converting thread assessment into a simple tactile check, the gauge shortens inspection cycles and helps maintain consistent assembly quality across batches. Durable design for reliable, repeatable inspections Built to withstand workshop conditions, the gauge's hardened material and precise flank geometry deliver low wear and stable performance during continuous use. The right-hand M112×1.5 geometry matches metric ISO fine threads, enabling immediate compatibility with components specified to that standard. The robust construction delivers long service life, lowering total cost of ownership through fewer tool changes and less downtime for verification tasks. Traceable calibration for quality assurance and audits Delivered with a calibration certificate, the gauge supports traceability and documentary proof for quality management systems. The supplied paperwork documents the inspection status of the tool at dispatch and simplifies integration into existing quality routines. For suppliers and production sites requiring documented measurement capability, this traceability reduces administrative overhead and increases confidence in in‑process checks and final acceptance decisions. For procurement or technical advice on the Metav IndustryLine plug gauge, contact Metav Werkzeuge for tailored guidance and ordering support. Technical data Article number / SKU: M315.512.6 GTIN: 4054469152035 Tariff number: 90173000 Facts Thread: M112 × 1.5 Tolerance class: DIN 13, 6H Orientation: Right-hand Weight: 2 kg Special features Material: gauge steel, hardened Supplied with calibration certificate Category: Thread plug gauge Brand: Metav IndustryLine FAQ What is the primary use of this plug gauge? The Thread plug gauge GUT M112×1.5 from Metav IndustryLine is intended for acceptance testing and verification of internal metric ISO fine threads to ensure correct form and fit. Does the gauge come with calibration documentation? Yes, the plug gauge is supplied with a calibration certificate, which documents its inspected status for quality records and audit purposes. Which tolerance class does the gauge check to? The gauge checks internal threads to DIN 13, 6H, matching the common metric ISO fine-thread tolerance for many engineering applications. Can this gauge be used on left-hand threads? No—this particular gauge is specified as a right-hand thread plug gauge and is suitable only for right-hand metric fine threads. Is the material suitable for frequent use in a production environment? Yes, the hardened gauge steel construction of the Thread plug gauge GUT M112×1.5 is designed for wear resistance and repeated use in industrial inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x1.5 Thread Go Ring, ISO Metric Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, precise DIN 13 (6g) tolerance and a supplied calibration certificate to secure reliable thread inspection results; order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. NO‑GO Thread Ring Gauge M112 x 1.5 — right‑hand, DIN 13 (6g) by Metav IndustryLine The NO‑GO Thread Ring Gauge M112 x 1.5 is a hardened gauge intended for production and incoming inspection of metric ISO fine threads (right‑hand), providing a clear go/no‑go reference for quality control in heavy‑duty manufacturing environments. Hardened gauge steel construction Supplied with calibration certificate Compliant with DIN 13 tolerance 6g Reliable inspection for metric fine threads This inspection ring serves as a decisive check for parts with M112 x 1.5 metric fine threads. Designed as a NO‑GO (reject) ring, it identifies undersized or incorrectly formed internal threads that would fail assembly or function. The combination of a defined DIN 13 tolerance class and hardened gauge steel delivers consistent contact geometry and abrasion resistance, which reduces gauge wear and preserves measurement certainty over a long service life. For production lines and laboratory checks alike, a dedicated inspection ring simplifies pass/fail decisions and integrates readily into existing control plans. Robust design for repeatable results The ring is manufactured from hardened gauge steel to maintain thread form under repeated use and to resist deformation during handling. That mechanical stability ensures the profile and pitch remain within specification and produces reproducible results across many cycles. The compact, single‑purpose design of the NO‑GO ring removes ambiguity from inspection: a clear mechanical stop signals non‑conformance without the need for readouts or interpretation. This efficiency supports lean quality routines and reduces downtime caused by ambiguous measurements. Traceable calibration and conformity for audit readiness Supplied with a calibration certificate, the gauge arrives documented for traceability and quality assurance. The certificate documents the inspection status at delivery and supports metrological traceability within the quality management system. Using a certified ring minimises risk during supplier audits and aids conformity evidence for batch release. For organisations seeking to maintain consistent acceptance criteria, the documented condition of the ring gauge at handover is a practical asset that strengthens internal audit trails and supplier quality agreements. For assured thread inspection in heavy‑duty applications, contact Metav Werkzeuge to arrange supply of the Metav IndustryLine NO‑GO thread ring gauge complete with calibration certificate and documentation. Technical Data Article number: M315.812.6 GTIN: 4054469152752 Label: Gewinde‑Lehrring AUSSCHUSS M 112 X 1,5 Facts Thread size: M112 x 1.5 Tolerance: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Material & special features Material: gauge steel, hardened Right‑hand metric ISO fine thread Supplied with calibration certificate NO‑GO (reject) ring gauge FAQ What is the intended use of this ring gauge? The NO‑GO ring gauge checks internal threads for undersize or incorrect form; the Metav IndustryLine NO‑GO Thread Ring Gauge M112 x 1.5 provides a simple pass/fail control for production and incoming inspection. Is the gauge traceably calibrated on delivery? Yes, the gauge is supplied with a calibration certificate that documents the inspection status at delivery and supports traceability within quality systems. Which tolerance standard applies to this gauge? This ring is manufactured to DIN 13 with a 6g tolerance class suitable for metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x1.5 Thread Plug Go/No‑Go Metric Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calib. Certificate - Metav IndustryLine
Robust verification made simple: hardened gauge steel construction and a clear DIN 13, 6H specification ensure dependable rejection checks for metric fine threads. Supplied with a traceable calibration certificate, the gauge supports consistent quality control in serial production; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. NO‑GO thread plug gauge M112 x 1.5 — metric ISO fine thread, right‑hand, Metav IndustryLine The NO‑GO thread plug gauge M112 x 1.5 is a right‑hand thread checking mandrel for verifying the rejection limit of metric ISO fine threads in production and inspection environments. Hardened gauge steel construction Calibrated and supplied with certificate For metric ISO fine thread M112×1.5 right‑hand Consistent rejection control for serial production The NO‑GO plug provides a precise, unambiguous check against the rejection limit defined by DIN 13, 6H, enabling rapid pass/fail decisions on threaded components. Manufactured from hardened gauge steel, the mandrel retains its profile under repeated use, reducing the need for frequent replacement and lowering downtime. By using a dedicated rejection gauge rather than subjective visual or tactile checks, inspection cycles become faster and more reliable, supporting lean production and minimising scrap rates. Traceability and audit readiness with included calibration certificate Delivered with a calibration certificate, the tool meets traceability requirements for quality systems and simplifies incoming inspection records. The supplied certificate documents the measured characteristics at delivery and supports routine quality audits; this makes the mandrel suitable for factories that require documented conformity for internal control plans or customer audits. The calibration status guarantees that the rejection boundary corresponds to defined limits, removing ambiguity from go/no‑go assessments. Designed for workshop use and straightforward handling The compact, single‑mandrel design focuses on robust function: the right‑hand geometry and metric M112 × 1.5 profile match the standard being inspected, while the hardened steel body resists wear in a busy workshop environment. The simple go/no‑go principle requires minimal operator training, so inspection can be integrated into existing workflows without complex setup. This directness reduces inspection time per part, improving throughput while maintaining conservative acceptance criteria. Integration into quality workflows and documentation As a standardised inspection artefact, the mandrel fits naturally into established quality routines: use it at first‑piece inspection, in‑line checks or final acceptance tests to ensure that threaded parts that exceed permissible major diameter or pitch errors are promptly identified. Because the gauge is referenced to DIN 13, results are immediately comparable across suppliers and production sites, facilitating consistent supplier evaluation and reducing ambiguity in part acceptance. For certified rejection checks with Metav IndustryLine equipment, contact Metav Werkzeuge for expert advice and delivery from Emmerich; our consultants will recommend the optimal inspection routine for your process. Technical data Article number: M315.612.6 SKU: M315.612.6 GTIN: 4054469152271 Tariff code: 90173000 Facts Thread size: M112 x 1.5 Tolerance class: 6H (DIN 13) Weight: 2 kg Special features Material: hardened gauge steel Right‑hand metric ISO fine thread profile Supplied with calibration certificate (calibrated at delivery) Intended function: rejection (NO‑GO) check for metric fine threads FAQ What does the NO‑GO designation mean for this plug gauge? The NO‑GO plug gauge denotes the rejection limit; parts that accept this mandrel exceed allowable thread tolerances. The NO‑GO thread plug gauge M112 x 1.5 (Metav IndustryLine, SKU M315.612.6) is therefore used to confirm that a threaded component must be rejected. Is the mandrel ready for use on arrival? Yes. The gauge is delivered calibrated and includes a calibration certificate, so it is ready for documented inspection tasks upon receipt. Which standard does the gauge conform to? The mandrel is manufactured to the dimensioning and tolerance scheme of DIN 13, 6H, matching the metric ISO fine thread standard used in many industrial applications. Can the gauge be used for left‑hand threads? No. This specific plug is manufactured for right‑hand metric ISO fine threads; left‑hand applications require the corresponding left‑hand gauge. How should the gauge be handled to preserve accuracy? Use the mandrel only for verification, store it in a protective box when not in use, and avoid impact or contamination. Periodic recalibration is recommended according to internal quality schedules to retain traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x1.5 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Calibrated, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge that verifies ISO metric fine threads with clear pass criteria, plus an included calibration certificate for traceable results; the result is faster, more reliable thread inspection and smoother quality control. Order the gauge directly via Metav Werkzeuge or ask our consultants for application advice. Thread Ring Gauge GUT M112 x 1.5 — ISO metric fine thread, right-hand (Metav IndustryLine) A thread ring gauge GUT M112 x 1.5 for reliable verification of right‑hand ISO metric fine threads in production and quality control settings, designed as a rugged go gauge for acceptance testing Includes calibration certificate Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M112 x 1.5 ISO fine thread, right‑hand Faster, reproducible acceptance testing on the shop floor A compact, purpose‑built go ring gauge simplifies repetitive verification tasks by providing an unambiguous pass criterion for internal threads. The hardened gauge steel construction ensures dimensional stability and resistance to wear, which reduces the need for frequent rechecks and keeps inspection throughput high. In routine use, the gauge replaces subjective thread feel with a definitive mechanical check, supporting rapid in‑line decisions and minimising production downtime. Robust design that eases handling and reduces measurement uncertainty Engineered for regular shop use, the ring gauge is finished to withstand handling while maintaining the thread form to the DIN 13 standard. The clear designation as a go gauge removes ambiguity in inspection workflows and helps maintain consistent quality across batches. Where traceable results are required, the supplied calibration certificate documents conformity and supports quality records. The gauge’s nominal size M112 x 1.5 and right‑hand orientation make it suitable for medium‑ and heavy‑duty threaded components frequently found in mechanical assemblies. Traceability and compliance to support quality systems The gauge arrives with a calibration certificate that documents its verification status at delivery, enabling straightforward integration into quality control processes and audit trails. Compliance with DIN 13, 6g provides a familiar reference for engineers and inspectors, while the robust material selection—hardened gauge steel—assures long service life and repeatability. For manufacturers and quality technicians, this combination of clear acceptance criteria and delivered verification supports process reliability and reduces the risk of non‑conforming assemblies. For application guidance or to arrange delivery from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav IndustryLine gauges are recommended where durable, traceable thread verification is required. Technical Data Article number: M315.712.6 GTIN: 4054469152516 ECLASS: 21170214 Tariff code: 90173000 Manufacturer: Metav IndustryLine Facts Nominal thread: M112 x 1.5 Weight: 2 kg Tolerance class: 6g Standard: DIN 13 Special features Type: Go ring gauge Hand: Right‑hand thread Material: Hardened gauge steel Delivered with calibration certificate Category: Gauges / Lehren Label: Gewinde‑Lehrring GUT M112 X 1,5 FAQ What does the included calibration certificate cover? The calibration certificate documents the verification of the thread ring gauge GUT M112 x 1.5 at delivery, providing traceable evidence that the gauge met the specified dimensions during inspection. Is this a go gauge or go/no‑go set? This listing is for the go ring gauge variant (GUT), intended to confirm acceptable internal threads; the designation indicates it is the pass‑side master. Which tolerance and standard apply to this gauge? The ring gauge conforms to DIN 13, tolerance class 6g, which is commonly used for ISO metric fine threads in mechanical engineering. Can the gauge be used in production for high‑volume checks? Yes, the hardened gauge steel and clear go criterion make the tool suitable for repeated acceptance checks in production and quality control. What is the exact nominal size and orientation of the thread? The gauge is specified as M112 x 1.5, right‑hand thread, suitable for fine‑pitch metric applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x2 Thread Go Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of robust hardened gauge steel, precise DIN 13 / 6g tolerance and a supplied calibration certificate for dependable, repeatable thread inspection in production and quality control; order the Go thread ring gauge M112 x 2.0 directly via Metav Werkzeuge or ask our consultants for application advice. Go thread ring gauge M112 x 2.0 – metric ISO fine thread, right-hand Go thread ring gauge M112 x 2.0 for acceptance testing of metric ISO fine threads in manufacturing and inspection Hardened gauge steel construction Includes calibration certificate Conforms to DIN 13 tolerance 6g Metric fine thread M112 x 2.0 right-hand Assured conformity and repeatable inspection results The Go thread ring gauge is a dedicated inspection tool for quick pass/fail assessment of external threads. Machined from hardened gauge steel, the device resists wear and preserves the calibrated limit. Conformity to DIN 13 with the 6g tolerance class ensures compatibility with standard metric ISO fine-thread specifications, supporting a consistent acceptance criterion on the shop floor. The supplied calibration certificate documents the gauge state at delivery and underpins traceable quality records. Durable design that reduces downtime and rework Built for repeated use in production environments, this ring gauge combines a compact profile with fatigue-resistant material to reduce distortion under handling. The hardened gauge steel body sustains dimensional stability, which prolongs intervals between verifications and cuts downtime. As a Go gauge, it identifies compliant external threads quickly, enabling faster decisions in series inspection and reducing scrap rates. The result is improved process efficiency and fewer interruptions in assembly and inspection workflows. Practical use and workplace integration Thread acceptance with this gauge is immediate: a correctly manufactured external thread should engage the Go ring without resistance, while non-conforming parts are reliably identified. The right-hand lead and the M112 x 2.0 pitch match industry-standard components, simplifying integration into existing quality routines. For traceability, record the calibration certificate alongside batch inspection records; this supports audits and continuous improvement initiatives and provides clear evidence for suppliers and customers. Contact Metav Werkzeuge GmbH for supply and technical advice on the Metav IndustryLine Go thread ring gauge, including calibration documentation and delivery from Emmerich. Technical data SKU: M315.712.7 GTIN: 4054469153582 Product label: Go thread ring gauge M112 x 2.0, right-hand Core specifications Thread designation: M112 x 2.0 Tolerance class: 6g (DIN 13) Material weight: 2 kg Customs tariff number: 90173000 ECLASS: 21170214 Features & applications Material: gauge steel, hardened Application: inspection of metric ISO fine threads Type: Go ring gauge for external thread acceptance Supplied with calibration certificate Category: Gauges / Inspection gauges FAQ What indicates a correct thread when using this gauge? A compliant external thread will fully engage the Go ring without forcing; the Go ring gauge M112 x 2.0 confirms acceptance per DIN 13 and the specified 6g tolerance. Is a calibration certificate included with the gauge? Yes, the Go thread ring gauge is supplied with a calibration certificate that documents its measured state at delivery for traceability. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened gauge steel, which provides wear resistance and dimensional stability for repeated inspections and longer service life. Can this gauge be used for non-standard threads or left-hand threads? This instrument is specified for M112 x 2.0 metric fine threads with a right-hand lead; alternative sizes or left-hand versions require the corresponding gauge type. How should inspection results be recorded? Record the gauge SKU and calibration certificate reference together with inspection batch data to maintain traceability and support internal or external audits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand Hardened Gauge Steel, Calib. Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of precise, repeatable thread inspection with a hardened gauge steel construction and compliance to DIN 13, 6H; supplied with a calibration certificate for traceability. Order via Metav Werkzeuge or consult our specialists for integration into quality routines. Thread plug gauge M112 x 2.0 (no‑go) — plug gauge for metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread plug gauge M112 x 2.0 (no‑go) designed to verify metric ISO fine threads in right‑hand components, suited for production inspection and final acceptance testing Hardened gauge steel construction Conforms to DIN 13, 6H thread standard Supplied with calibration certificate Right‑hand M112 x 2.0 no‑go plug gauge Consistent rejection criteria for fine threads A dedicated no‑go plug provides an unmistakable pass/fail check for fine metric threads: if the M112 x 2.0 no‑go does not enter, the thread meets the tolerance; if it fits, the part must be rejected. This binary control removes interpretation from routine inspections, shortening cycle times and reducing false positives. Compliance with DIN 13, 6H anchors the gauge to recognised tolerances for metric ISO fine threads, giving procurement and quality departments a verifiable reference for acceptance decisions. Robust design for repeatable use on the shop floor Manufactured from hardened gauge steel, the gauge resists wear and preserves functional limits over long production runs. The right‑hand orientation and precise thread form match the target geometry, while the compact single‑piece design minimises deformation during handling. The tool’s mass supports stable engagement during manual checks and helps maintain consistent seating — a practical advantage in serial inspection environments where tool life and repeatability are priorities. Traceability and process integration Delivered with a calibration certificate, the gauge supports documented quality systems and audit trails. The plug gauge is ready for immediate use in inspection routines and can be referenced on production control plans as the acceptance monitor for M112 x 2.0 metric fine threads. Markings such as SKU and GTIN enable straightforward inventory and traceability management in a parts database or ERP system, simplifying stock control and reducing administrative overhead. For reliable thread inspection and traceability, contact Metav Werkzeuge to discuss how the Metav IndustryLine M112 x 2.0 no‑go plug gauge can be integrated into existing quality workflows — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: M315.612.7 GTIN: 4054469153209 Material: Lehrenstahl, gehärtet Thread: M112 x 2.0 Standard: DIN 13, 6H Weight: 2 kg Key figures Thread size: M112 x 2.0 Tariff number: 90173000 Mass: 2 kg Special features No‑go (reject) plug gauge for thread inspection Right‑hand thread form Supplied with calibration certificate Designed for metric ISO fine threads FAQ What is a no‑go thread plug gauge and when is it used? A no‑go plug gauge is a rejection gauge that checks the upper tolerance limit of an internal thread; the Thread plug gauge M112 x 2.0 (no‑go) is used during in‑process or final inspection to ensure parts that accept the no‑go are flagged and removed from production. Does the gauge comply with recognised thread standards? Yes, this plug gauge is produced to match DIN 13, 6H, which corresponds to the metric ISO fine thread form for the M112 x 2.0 size. Is the gauge supplied ready for quality records? The tool is supplied with a calibration certificate, enabling traceability and immediate inclusion in inspection documentation for the M112 x 2.0 plug gauge. What material is the gauge made from and how does that affect service life? The gauge is made from hardened gauge steel; this material choice improves wear resistance and helps maintain the functional limits over extended inspection cycles. Which SKU should be referenced when ordering or logging the tool? Reference SKU M315.612.7 for ordering, stock control and documentation related to the Metav IndustryLine thread plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x2 Thread Go/No-Go Ring Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Benefit from a hardened gauge‑steel construction, DIN 13 tolerance class 6g and an included calibration certificate for fast, repeatable thread control; order the No‑Go thread ring gauge M112 x 2.0 directly via Metav Werkzeuge or ask our consultants if needed No‑Go thread ring gauge M112 x 2.0 – Metric ISO fine thread, DIN 13 (Metav IndustryLine) The No‑Go thread ring gauge M112 x 2.0 is a hardened gauge‑steel reject ring intended for verification of right‑hand metric ISO fine threads to DIN 13 tolerance class 6g Hardened gauge steel construction Metric fine thread M112 x 2.0 DIN 13 tolerance class 6g Supplied with calibration certificate Rapid, reliable verification for metric fine threads A dedicated No‑Go ring provides an unambiguous pass/fail check for large metric fine threads: if the M112 x 2.0 reject ring can be fully engaged, the thread is outside tolerance and the workpiece must be rejected. This simple binary result reduces inspection time compared with full-form measurement and supports production lines that require quick, repeatable decisions. The tool is especially suitable where assembly integrity depends on correct thread geometry and where downstream rework would be costly. Durable construction for long service life and repeatability Constructed from hardened gauge steel, the ring maintains its profile under frequent use, minimising wear and preserving the gauge limit over prolonged inspection cycles. The nominal tolerance 6g aligns with common engineering practice for metric fine threads, offering a balance between manufacturability and fit control. The robust material choice and heat treatment deliver consistent geometry, so repeatability of the go/no‑go check is preserved across batches — an important factor for steady quality control. Traceable calibration supports quality systems The gauge is supplied with a calibration certificate, providing documented traceability for internal quality records and external audits. The certificate confirms the ring’s conformity at the time of issue and allows integration into regular verification schedules. For production facilities and inspection departments, this documented assurance simplifies supply‑chain acceptance and supports compliance with internal quality procedures. Practical use in workshop and inspection routines As a visual and tactile verification tool the ring is straightforward to integrate into control plans: use alongside go gauges, plug gauges or full measurement systems to segregate gross deviations before committing parts to further processing. The right‑hand metric fine thread design suits standard assembly directions and fasteners; pairing the ring with routine calibration checks ensures the quick pass/fail test remains a reliable first line of defence against out‑of‑tolerance parts. For calibrated, workshop‑ready verification of M112 threads, contact Metav Werkzeuge in Emmerich to order the Metav IndustryLine No‑Go thread ring gauge M112 x 2.0 and receive tailored advice for inspection workflows Technical Data Article number: M315.812.7 GTIN: 4054469153797 Label: Gewinde‑Lehrring AUSSCHUSS M 112 X 2,0 für metrisches ISO‑Feingewinde, rechts Facts Weight: 2 kg Tariff number: 90173000 Special features Hardened gauge steel DIN 13, tolerance class 6g Right‑hand metric fine thread M112 x 2.0 Supplied with calibration certificate No‑Go (reject) ring gauge FAQ What is the primary function of this gauge? The No‑Go thread ring gauge M112 x 2.0 is used to perform a fast pass/fail check on right‑hand metric ISO fine threads to DIN 13, immediately identifying threads that exceed tolerance. How does the No‑Go ring indicate a rejected thread? If the No‑Go ring fully engages the thread, the part does not meet the specified limit; the Metav IndustryLine No‑Go ring therefore signals rejection without further measurement. Is the gauge delivered ready for inspection use? Yes, the gauge is supplied with a calibration certificate, confirming the ring’s condition at delivery and enabling immediate inclusion in quality records. Which standard and tolerance class does the ring follow? The ring conforms to DIN 13 and is manufactured for tolerance class 6g, suitable for metric ISO fine thread control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M112x2 Thread Plug Gauge Go For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel and traceable calibration certificate to ensure repeatable thread checks; the DIN 13, 6H tolerance and M112 × 2.0 geometry support consistent quality control. Order the plug gauge directly via Metav Werkzeuge or consult the technical team for application support. Thread plug gauge GUT M112 × 2.0 — metric ISO fine thread plug gauge, right-hand, Metav IndustryLine The Thread plug gauge GUT M112 × 2.0 is a hardened plug gauge for verifying internal metric ISO fine threads in production and inspection environments, designed for reliable Go verification to DIN 13, 6H. Hardened gauge steel construction For metric ISO fine thread M112 × 2 Right-hand thread verification to DIN 13, 6H Delivered with calibration certificate Precision that secures production quality This plug gauge is built from hardened gauge steel, offering dimensional stability and long service life under frequent use. The M112 × 2.0 nominal geometry and compliance with DIN 13, 6H provide a verifiable reference for internal thread acceptance, enabling rapid Go checks on components without the need for complex measuring set-ups. By applying a simple, repeatable acceptance test, the gauge reduces inspection time and lowers the risk of assembly faults or rework, supporting higher first-pass yield in machining and assembly lines. Designed for straightforward inspection and throughput As a Go-type plug gauge (GUT), the tool performs a clear go/no-go function that integrates seamlessly into incoming inspection or process control stations. The right-hand thread configuration matches standard production practice for metric fine threads, and the robust construction withstands workshop handling. The compact, single-purpose format makes the gauge easy to use in handheld checks or mounted fixture checks, while maintaining the repeatability required for batch inspections and serial production monitoring. Traceability and conformity for audit-ready documentation Delivered with a calibration certificate, the gauge supports traceable quality assurance and documentation of measurement capability. Calibration documentation accompanies the item to demonstrate conformity at the point of delivery and to support internal quality records. The combination of a hardened gauge body, DIN conformity and supplied calibration provides purchasers with objective evidence for process audits and supplier chains demanding documented verification. Practical fit for workshop and inspection benches The plug gauge is suitable for dedicated thread verification tasks where a fast, unambiguous decision is required. Its robust material and straightforward function make it a reliable tool for production control, toolroom checks and final inspection of threaded components. For customers requiring technical clarification on application or integration into an inspection routine, Metav Werkzeuge’s consultants can provide specification guidance and selection support. Choose the Metav IndustryLine thread plug gauge for traceable verification and consult Metav Werkzeuge in Emmerich for tailored technical advice and swift delivery Technical Data Article number: M315.512.7 GTIN: 4054469152998 Material: gauge steel, hardened Thread size: M112 × 2.0 Norm: DIN 13, 6H Weight: 2 kg Core figures Nominal diameter: 112 mm Pitch: 2.0 mm Tolerance class: 6H Tariff number: 90173000 Special features GUT (Go) plug gauge design Right-hand thread verification Delivered with calibration certificate Intended for metric ISO fine threads Category: plug gauges / inspection gauges FAQ What is the primary purpose of this gauge? The thread plug gauge GUT M112 × 2.0 (plug gauge) is intended to verify the acceptability of internal metric ISO fine threads by providing a clear Go check against the DIN 13, 6H tolerance. Is the gauge supplied with calibration documentation? Yes, the plug gauge is delivered with a calibration certificate, which documents the inspection state at delivery and supports traceability for quality systems. Which standard and tolerance does the gauge check? The gauge checks threads to DIN 13, 6H, providing verification for metric ISO fine thread geometry at M112 × 2.0. Can the gauge be used directly in production for repeated checks? The hardened construction and Go design make the gauge suitable for repeated use in production and inspection benches for fast acceptance testing. How is the gauge marked or identified for inventory? The item is identified by SKU M315.512.7 and GTIN 4054469152998, which can be used for stock control and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M115x1.5 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge With Calibration Certificate, DIN 13 6H - Metav IndustryLine
The combination of a hardened gauge steel construction, DIN 13 / 6H tolerance, and an included calibration certificate ensures reproducible inspection results and reduced scrap rates in production. Order the gauge directly via Metav Werkzeuge or consult the Metav specialists for integration into existing quality workflows. Metav IndustryLine Thread Plug Gauge M115×1.5 (NO‑GO) — Hardened Gauge Steel, DIN 13 6H The Thread Plug Gauge M115×1.5 is a right‑hand metric ISO fine‑thread NO‑GO plug gauge intended for rapid, reliable validation of internal threads in industrial production and incoming‑inspection. Hardened gauge steel construction Calibrated delivery with certificate DIN 13, tolerance 6H compliant Designed for right‑hand M115×1.5 threads Engineered for reliable fine‑thread inspection The NO‑GO plug gauge is designed to give a clear, unambiguous pass/fail control in thread inspection and thus to prevent out‑of‑tolerance internal threads from entering assembly. Manufactured to DIN 13 with tolerance class 6H, the gauge provides a stable reference that supports repeatable decisions on acceptance and rejection. Using a dedicated NO‑GO mandrel simplifies the inspection routine: a correct internal thread will not accept the NO‑GO gauge, indicating the part falls within the permissible envelope. This focused approach shortens inspection time while preserving process reliability in machine shops and quality departments. Traceable calibration for audit‑ready documentation Delivered with a documented calibration certificate, the gauge is ready for use in regulated production environments and quality systems that require evidence of measurement traceability. The certificate documents the inspection state at delivery and supports record keeping for internal audits and external compliance checks. For procurement and quality managers this means the gauge can be introduced into control plans without delay, providing a verifiable measurement baseline that aligns with industry expectations for traceability and quality assurance. Robust construction for industrial handling Constructed from hardened gauge steel, the mandrel is dimensionally stable and wear‑resistant under repetitive use. The large nominal size and coarse pitch of this tool make mechanical robustness a priority; with a compact but sturdy form factor and a listed weight of 2 kg, the mandrel resists deformation during regular go/no‑go operations. The right‑hand geometry and the M115×1.5 specification match common fine‑threaded components in heavy engineering and assemblies, offering a practical balance between handling comfort and the stiffness required for repeatable measurements. Practical use in inspection workflows In practice, the NO‑GO plug is inserted into the internal thread to check for oversize or damaged threads; failure to insert is the intended, conforming outcome. The tool is particularly suitable for production controls, incoming goods inspection, and random sampling where a fast, definitive check is required. As the gauge is supplied with a calibration certificate, inspection records can be updated immediately after first use, and the gauge can be integrated into statistical process control routines or quality documentation to reduce rework and ensure consistent assembly quality. Contact Metav Werkzeuge today to confirm stock availability of the Metav IndustryLine thread plug gauge and to discuss calibration intervals, traceability documentation or complementary gauges for a complete inspection solution Technical Data Article number: M315.615.6 GTIN: 4054469152288 Size: M115×1.5 Type: NO‑GO plug gauge Thread hand: right‑hand Material: hardened gauge steel Standard: DIN 13, 6H Weight: 2 kg Customs tariff number: 90173000 Eclass: 21170228 Facts Nominal diameter: 115 mm Thread pitch: 1.5 mm Weight: 2 kg Special features Calibrated delivery with certificate Intended for metric ISO fine threads Designation: AUSSCHUSS (NO‑GO) Brand: Metav IndustryLine FAQ What does NO‑GO mean for this plug gauge? The NO‑GO designation indicates that the plug gauge is meant to detect oversize or non‑conforming internal threads; a correct thread should not admit the NO‑GO mandrel. Is a calibration certificate supplied with the gauge? Yes, the Metav IndustryLine thread plug gauge M115×1.5 is delivered with a calibration certificate documenting the inspection status at the time of supply. For which thread standard is this gauge suitable? The mandrel is manufactured to DIN 13 and tolerance class 6H, making it suitable for metric ISO fine threads of the specified size. Can this gauge be used for left‑hand threads? No, this specific item is produced as a right‑hand plug gauge and is intended only for right‑hand metric threads. What materials or components is the gauge intended for? The plug gauge checks the geometry of internal threads regardless of component material; it is commonly used in metalworking and component inspection where internal metric threads must meet specified tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com