Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M78x1.5 Thread Go Ring For ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take the fast route to reliable thread verification with a hardened gauge that matches DIN tolerances and arrives with a calibration certificate; the combination of robust construction, traceable calibration and workshop suitability supports consistent production quality. Order the thread ring gauge directly via Metav Werkzeuge or ask the consultants for application advice. Thread ring gauge GO M78 x 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread ring gauge GO M78 x 1.5 is a hardened gauge‑steel verification tool for right‑hand metric ISO fine threads, designed for fast go/no‑go checking in production and quality control. Hardened gauge steel construction DIN 13 tolerance class 6g Supplied with calibration certificate For M78 x 1.5 right‑hand metric fine threads Faster pass/fail decisions through standardised checking The design focuses on repeatable, unambiguous verification: a GO gauge in hardened gauge steel enables immediate pass/fail assessment of threaded parts by matching the nominal size M78 x 1.5 to the DIN 13 tolerance band 6g. Using a purpose‑made ring gauge removes subjective judgement from thread acceptance and shortens inspection time on the shop floor. The clear mechanical fit criterion reduces rework and speeds up throughput while maintaining traceable quality checks. Built‑for‑workshop durability and handling benefits Constructed from hardened gauge steel, this ring offers the rigidity and wear resistance required for frequent use under industrial conditions. The compact, one‑piece ring form keeps the gauging interface true and resistant to distortion, so measurements remain reproducible over many cycles. The moderate mass ensures stability during checks without being cumbersome in a busy inspection area, improving handling ergonomics and lowering the chance of measurement variability caused by poor support. Traceable verification that fits quality systems A calibration certificate is supplied with the gauge, providing documented evidence of conformity at the time of delivery and supporting traceability in quality records. The supplied documentation simplifies acceptance into internal inspection routines and audit trails. With clear identification (GTIN and SKU) and a defined tolerance class, the gauge can be incorporated easily into process control plans and measurement reports, strengthening compliance and audit readiness for serial production. For a production‑ready thread verification solution and to discuss calibration or batch requirements, contact Metav Werkzeuge to order this Metav IndustryLine ring gauge or obtain further technical details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: M315.778.6 GTIN: 4054469152646 Article: Thread ring gauge GO M78 x 1.5 Facts Thread nominal size: M78 Pitch: 1.5 mm Weight: 2 kg Tariff number: 90173000 eCl@ss: 21170214 Special features Material: gauge steel, hardened Standard: DIN 13, tolerance class 6g Type: GO gauge Supplied with calibration certificate Right‑hand metric ISO fine thread Brand: Metav IndustryLine FAQ What is the intended use of this ring gauge? The ring gauge is intended for rapid go/no‑go verification of M78 x 1.5 right‑hand metric ISO fine threads to confirm conformity with DIN 13, 6g during production and incoming inspection. Is a calibration certificate provided with the gauge? Yes, a calibration certificate is supplied with the gauge and documents the measured conformity at delivery for traceability in quality systems. Which material is the gauge made from? The gauge is manufactured from hardened gauge steel, chosen for durability and stable measuring performance under repeated use. How does the gauge support process control? By providing an immediate pass/fail result for the M78 x 1.5 thread form and a documented calibration record, the gauge simplifies acceptance criteria and supports reproducible inspection routines. Can this gauge be used on left‑hand threads? This specific item is produced for right‑hand metric ISO fine threads and is not suitable for left‑hand thread checking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M78x1.5 Thread Go Ring Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, conformity to DIN 13 (6g) and a supplied calibration certificate for reliable, repeatable thread inspection; order or enquire via Metav Werkzeuge for advice and fast delivery. Thread ring gauge (No-Go) M78 x 1.5 — Metric ISO fine thread, right-hand — Metav IndustryLine A thread ring gauge (No-Go) M78 x 1.5 designed for pass/fail inspection of right‑hand metric ISO fine threads in production and workshop quality control Hardened gauge steel body DIN 13 tolerance class 6g Supplied with calibration certificate Fast, unambiguous pass/fail inspection for production control A dedicated no‑go ring provides an immediate, objective decision during thread inspection: parts that accept the no‑go are out of tolerance and must be rejected. The thread ring gauge (No-Go) M78 x 1.5 is specified for metric ISO fine threads and built to the DIN 13 tolerance system, class 6g, so it integrates seamlessly into standard quality routines. Using a dedicated no‑go member removes interpretation from the process and shortens inspection time, improving throughput and reducing downtime in batch checks. Robust construction for reproducible, long‑term use Manufactured from hardened gauge steel, the measuring ring offers wear resistance and dimensional stability under repeated contact. The hardened body and precise machining reduce the need for frequent replacement, providing durable service life even in busy shop environments. This construction supports consistent tactile feedback during checks and keeps measurement variance low, which is vital when repeatability across shifts and operators directly affects production yield. Traceable calibration and straightforward integration into QA workflows Supplied with a calibration certificate, the ring gauge ensures traceability for internal audits and customer inspections. The certificate documents the reference state at delivery and allows the gauge to become part of a documented inspection chain. Integration into an existing quality system is straightforward: mark the gauge for its inspection interval, record the calibration data, and use it as a go/no‑go control in assembly, incoming inspection or final part release to maintain traceable conformity. For professional procurement or technical advice on this Metav IndustryLine thread ring gauge, contact Metav Werkzeuge to discuss suitability for specific components or to arrange delivery with certification. Technical Data SKU: M315.878.6 GTIN: 4054469152882 Size: M78 x 1.5 Direction: right‑hand Weight: 2 kg Facts ECLASS: 21170214 Tariff number: 90173000 Norm: DIN 13, 6g Special features Material: gauge steel, hardened Type: No‑Go (reject) thread ring gauge Supplied with calibration certificate Category: Gauges / Thread gauges Brand: Metav IndustryLine FAQ How is this gauge used in production? The no‑go ring is used as a pass/fail tool for thread acceptance; if the part accepts the no‑go, the thread fails and must be rejected. The ring gauge simplifies inline and batch inspection. Is the gauge delivered calibrated? Yes — the ring is supplied with a calibration certificate that documents its measured condition at delivery and supports traceability in quality systems. What standard and tolerance class does the gauge conform to? The gauge is manufactured to DIN 13, tolerance class 6g, matching common metric ISO fine‑thread inspection requirements. What materials and durability can be expected? Made from hardened gauge steel, the ring offers high wear resistance and stable dimensions for prolonged workshop use. Does the gauge check left‑hand threads? This particular ring is intended for right‑hand threads only; left‑hand inspections require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M78x1.5 Thread Plug Gauge Three-Point, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
This GO thread plug gauge delivers repeatable accept/reject checks, hardened construction and traceable calibration; ideal for stable in‑process inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for process integration. Thread plug gauge M78×1.5 (GO) — ISO metric fine thread, right-hand, hardened A Thread plug gauge M78×1.5 (GO) for fast, unequivocal verification of ISO metric fine threads in production and inspection, manufactured to DIN 13, 6H tolerances Hardened gauge steel construction Conforms to DIN 13, 6H Includes calibration certificate GO plug gauge for M78×1.5 right-hand Consistent acceptance testing that reduces rework A GO plug gauge provides a rapid, binary result that removes ambiguity from routine thread checks. The M78×1.5 dimension and the DIN 13, 6H tolerance setting make this gauge suitable for ISO metric fine threads used in assemblies where fit reliability matters. Because the gauge is produced from hardened gauge steel, the contact surfaces resist wear and maintain dimensional integrity over repeated use; the result is fewer false rejects and reduced rework on the shop floor. Traceable calibration for quality assurance Supplied with a calibration certificate, the gauge is ready for use in documented quality systems and incoming goods inspection. The calibration certificate confirms measurement traceability and supports audit requirements when recording acceptance checks. For quality departments, the certificate simplifies conformity evidence and helps keep inspection records consistent across shifts and production lines. Robust design for demanding environments Constructed from hardened gauge steel, the plug gauge withstands typical workshop handling and offers stable measuring behaviour. The compact geometry of a plug gauge also helps reduce the influence of operator handling on the result, delivering reliable repeatability in high-frequency checks. The right-hand configuration and GO designation are optimised for verifying that an internal thread will accept the mating external thread without interference. Practical applications and integration tips Ideal for in‑process inspection, final inspection or incoming goods checks, the gauge supports fast go/no‑go decisions at the production point. The GO function confirms that the threaded bore meets minimum material and fit requirements; it is therefore best combined with periodic measurement audits or compatible NO‑GO gauges for full tolerance assurance. For traceable metrology, keep the gauge stored with its calibration documentation and re‑calibrate according to company inspection intervals. Request integration advice or a calibration copy from Metav Werkzeuge; our Metav IndustryLine consultants can advise how the gauge suits a specific thread control workflow and ensure smooth adoption on the shop floor. Technical data Article number: M315.578.6 GTIN: 4054469152165 Tariff code: 90173000 Weight: 2 kg Facts Thread size: M78×1.5 Tolerance/norm: DIN 13, 6H Type: GO (GUT) plug gauge Orientation: right-hand Special features Material: gauge steel, hardened Delivered with calibration certificate Intended for ISO metric fine threads Category: gauges / plug gauges FAQ What does the GO designation mean for this plug gauge? The GO marking indicates the gauge checks whether an internal thread meets the minimum acceptance criteria; the Thread plug gauge M78×1.5 (GO) confirms that a mating external thread will fit without interference. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate that documents measurement traceability and is suitable for use in formal inspection procedures. Which standards govern the tolerances of this gauge? Tolerances are set to DIN 13, 6H, matching the ISO metric fine thread class specified for the M78×1.5 dimension. Can this gauge be used in a production line for quick checks? The gauge is designed for rapid go/no‑go checks on the production line; its hardened construction supports frequent handling and helps maintain repeatability. What material is the gauge made from and how does that affect longevity? Manufactured from hardened gauge steel, the plug gauge offers wear resistance and dimensional stability, extending service life under normal workshop conditions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M78x1.6 Thread Go Gauge Metric ISO Fine Right-Hand, With Calibration Certificate - Metav IndustryLine
Data conflict detected: the product label specifies M78 × 1.5 while the mass field lists M78 × 1.6; please verify the correct thread pitch before publishing. This discrepancy may lead to confusion or errors if not addressed promptly. Ensuring accuracy in technical specifications is crucial, particularly for products where precise measurements are essential. Please cross-check the thread pitch values against the original design documentation or consult with the relevant team to confirm the correct specification. Resolving this issue before publication will help maintain the integrity of the product information and prevent potential misunderstandings or complications for end users.
M78x2 Go Thread Plug Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Taking advantage of the hardened gauge steel, the M78 x 2.0 metric fine thread and the included calibration certificate ensures reliable pass/fail checks on production threads; this reduces rework and secures process consistency. Order the thread plug gauge directly via Metav Werkzeuge or consult our experts for application advice. Thread Plug Gauge GUT M78 x 2.0 (right-hand) — Metav IndustryLine The Thread Plug Gauge GUT M78 x 2.0 is a right-hand go gauge for quick verification of metric ISO fine internal threads in production and inspection environments. Hardened gauge steel construction Calibrated with certificate included DIN 13 tolerance class 6H Metric fine thread M78 x 2 Fast, unequivocal acceptance testing for fine threads The primary role of this inspection tool is rapid, unambiguous verification: the go gauge checks whether an internal thread meets the acceptance limit defined by DIN 13, 6H. By passing the gauge through a threaded bore, a clear go/no-go decision is obtained without time‑consuming dimensional conversions. The hardened construction and tight tolerance class make this instrument particularly suited to repetitive production checks where throughput and traceability matter. Using a purpose-built inspection gauge reduces cycle time and prevents costly downstream assembly rejects. Robust construction tailored to shop‑floor use Constructed from hardened gauge steel, this plug gauge is dimensionally stable and resistant to wear under regular use. The right‑hand metric ISO fine thread profile (M78 x 2.0) is machined and finished to maintain repeatability over many inspection cycles. The compact, single‑piece design minimises handling errors and is straightforward to use in fixtures or by hand. Retaining the calibration interval and avoiding knocks or contamination extends service life; for storage, a protective sleeve or rack is recommended to preserve the working faces and the thread form. Traceability and integration into quality routines Delivered with a calibration certificate, the gauge supports documented quality processes and audit trails. The certificate verifies compliance with the stated limits and allows direct incorporation into inspection plans and quality records. As a simple pass/fail instrument, the plug gauge complements dimensional measuring tools by offering immediate go/no-go feedback, thereby streamlining final checks and in‑process control. For customers seeking a reliable go gauge solution that aligns with industrial inspection protocols, this tool from Metav IndustryLine integrates seamlessly into shop‑floor metrology routines. For traceable verification of metric ISO fine threads, contact Metav Werkzeuge to secure the Metav IndustryLine thread plug gauge M78 x 2.0 and discuss its fit for production inspection. Technical data Article number: M315.578.7 GTIN: 4054469153124 HS code: 90173000 Brand: Metav IndustryLine Core specifications Thread size: M78 x 2.0 Thread pitch: 2.0 mm Tolerance class: 6H (DIN 13) Weight: 2 kg Special features Material: Gauge steel, hardened Calibration certificate included Right‑hand metric ISO fine thread Go gauge (GUT) for acceptance testing FAQ What is the purpose of this plug gauge? The Thread Plug Gauge GUT M78 x 2.0 is used for pass/fail verification of internal metric ISO fine threads, providing a rapid acceptance decision during production or incoming inspection. Does the gauge include calibration documentation? Yes, the plug gauge is supplied with a calibration certificate that documents conformity to the specified limits and supports traceability in quality systems. What does GUT mean on this gauge? GUT denotes the “go” condition: the plug gauge verifies that the thread meets the minimum acceptance profile; it does not function as a measuring instrument for exact dimensions. Which standard does this gauge follow? This product conforms to the thread tolerance specified by DIN 13, tolerance class 6H for metric internal threads. Is the gauge suitable for repetitive shop‑floor checking? Yes, the hardened gauge steel construction and simple go/no‑go principle make the gauge appropriate for frequent inspection cycles in production environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M78x2 Thread Go Ring Gauge ISO Fine Pitch Right-Hand Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel, DIN 13, 6g conformity and a supplied calibration certificate to keep thread production within specification limits; order directly via Metav Werkzeuge or consult our specialists for integration into quality control processes. Thread ring gauge NO‑GO M78 x 2.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) A Thread ring gauge NO‑GO M78 x 2.0 designed for decisive inspection of right‑hand metric ISO fine threads in production and final quality control M78 x 2.0 for ISO fine threads Hardened gauge steel, durable construction Conforms to DIN 13, tolerance grade 6g Supplied with calibration certificate Ensure only conforming threads pass final inspection A dedicated no‑go ring gauge serves a single, critical purpose in a quality workflow: to identify threads that exceed permissible dimensional limits. The M78 x 2.0 gauge presented here is manufactured to the DIN 13, 6g specification and marks oversize or out‑of‑tolerance threads reliably, reducing the risk of assembly failures and costly rework. Using a dedicated reject gauge simplifies decision making on the shop floor and accelerates in‑process control by providing an immediate, binary result: pass or reject. Robust design for repeatable, long‑term use Made from hardened gauge steel, the ring gauge delivers mechanical stability and wear resistance necessary for repeated use in industrial environments. The substantial mass (approx. 2 kg) and heat treatment enhance dimensional stability, so the gauge maintains its functional tolerance over time. This robustness translates into fewer replacements and consistent measurement standards across production batches, supporting a reproducible inspection routine without frequent recalibration. Traceable calibration for audit‑ready documentation This ring gauge is supplied with a calibration certificate, ensuring traceability of inspection results and easing compliance with internal quality systems. The included certificate documents the verification that the gauge meets the specified limits at delivery—helpful during supplier audits and when integrating the gauge into traceable measurement chains. Where documented evidence is required for process control, the calibration paperwork serves as an immediate record that the inspection tool was verified prior to use. Practical application in the workshop or inspection bench Designed as a right‑hand no‑go ring gauge for metric ISO fine threads, it is suitable for rapid checks during production, final inspection of assemblies, and incoming part control. The gauge enables quick verification that threads do not exceed the maximum material condition permitted by the standard; items that allow the no‑go gauge to thread on are flagged for rework or rejection. Its compact form and durable finish make it convenient for bench use or inclusion in a gauge set for routine sampling plans. Contact Metav Werkzeuge today for delivery options, integration advice and to add this Metav IndustryLine no‑go ring gauge to a robust, traceable inspection routine. Technical Data Article number: M315.878.7 GTIN: 4054469153926 Tariff number: 90173000 Facts Thread size: M78 x 2.0 Hand: Right‑hand thread Weight: 2 kg Special features Material: hardened gauge steel Standard: DIN 13, tolerance grade 6g Special feature: supplied with calibration certificate FAQ What is the primary purpose of this ring gauge? The ring gauge is a no‑go ring gauge for right‑hand metric ISO fine threads and is used to identify threads that exceed allowable limits so non‑conforming parts can be rejected. Is the gauge delivered calibrated? Yes, the M78 x 2.0 ring gauge is supplied with a calibration certificate, documenting verification at delivery and supporting traceability for quality records. Which standard does this gauge comply with? The gauge is manufactured to DIN 13 with tolerance grade 6g, suitable for inspection of metric ISO fine threads. What material is the gauge made from and why does that matter? Constructed from hardened gauge steel, the gauge offers wear resistance and dimensional stability, which ensures repeatable inspection results and longevity in industrial use. How should the no‑go result be interpreted in inspection? If the no‑go ring gauge can be fully threaded onto the part, the thread is oversized and should be rejected or reworked; if the gauge does not engage, the thread meets the maximum material condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M78x2 Thread Go Ring Gauge Metric ISO Fine Pitch Right Hand Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of quick, standards-compliant thread verification combined with robust, hardened gauge steel for dependable production control; delivered with a calibration certificate for immediate use — order directly via Metav Werkzeuge or contact our consultants for application advice. Go thread ring gauge GUT M78 × 2.0 — right-hand metric ISO fine thread, hardened gauge steel (Metav IndustryLine) The Go thread ring gauge GUT M78 × 2.0 is a hardened gauge steel ring designed for rapid verification of right-hand metric ISO fine threads in production control and incoming inspection. Calibrated delivery with calibration certificate Hardened gauge steel construction DIN 13 tolerance class 6g compliance M78 × 2.0 right-hand metric fine thread Fast conformity checks that keep production moving For routine thread inspection the go ring gauge provides an immediate go/no-go decision, reducing cycle times on the shop floor. Its nominal profile for M78 × 2.0 threads complies with DIN 13 and tolerance class 6g, so pass/fail checks integrate directly into quality plans and inspection protocols. This removes ambiguity from visual assessments and accelerates throughput while maintaining consistent conformity reporting. Robust construction for repeatable measurements Made from hardened gauge steel, the ring offers long service life under frequent use and resists wear that would compromise fit control. The solid build stabilises the contact geometry, which preserves the calibrated profile over repeated trials and minimises the need for frequent replacement. As a result, the gauge supports reproducible acceptance testing and reduces downtime associated with tool change or rework. Delivered calibrated to support traceable quality assurance Supplied with a calibration certificate, the gauge can be introduced into documented inspection routines immediately, supporting traceability and audit-readiness. The certificate documents the verification state at delivery, simplifying first-use qualification and record keeping for production or supplier inspection. Traceable calibration underpins confidence in measurement results during serial production and parts acceptance. Easy integration into workshop and inspection layouts Designed for practical handling in both workshop and laboratory environments, the ring gauge is compact and straightforward to employ during incoming goods checks or in-process inspection. Its designation as a Go gauge clearly separates acceptance testing from measurement tasks that require instruments such as thread micrometres or optical comparators. Use of the gauge complements existing metrology equipment and standardises go/no-go decisions without adding complex procedures. For assured thread acceptance and documented verification, consult Metav Werkzeuge about the Metav IndustryLine go ring gauge or instruct our specialists to supply the calibrated gauge with supporting documentation. Technical data Article number: M315.778.7 GTIN: 4054469153711 Label: Go thread ring gauge GUT M78 × 2.0, right-hand Facts Thread size: M78 × 2.0 Material weight: 2 kg Standard: DIN 13, 6g Harmonised tariff code: 90173000 Special features Material: gauge steel, hardened Feature: delivered with calibration certificate Function: go (GUT) acceptance ring Thread direction: right-hand FAQ What is this gauge used for? The go ring gauge GUT M78 × 2.0 is used for rapid go/no-go verification of right-hand metric ISO fine threads during production control and incoming inspection. Is the gauge supplied calibrated? Yes, the gauge is delivered with a calibration certificate that documents the measurement state at delivery for the Metav IndustryLine go ring gauge (Article number M315.778.7). Which standard does the gauge comply with? The ring conforms to DIN 13 and is manufactured for tolerance class 6g, making it suitable for standardised thread acceptance procedures. What material is the gauge made from? This go ring gauge is manufactured from hardened gauge steel to ensure wear resistance and long-term stability of the calibrated profile. Can the gauge be used for left-hand threads? No, this specific ring is a right-hand thread gauge for M78 × 2.0 threads; left-hand threads require a correspondingly specified left-hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M78x2 Thread Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, verified DIN 13, 6H thread form and a supplied calibration certificate for consistent rejection control; order the thread gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge (no‑go) M78 x 2.0 — right‑hand, metric ISO fine thread by Metav IndustryLine The thread plug gauge (no‑go) M78×2.0 is a right‑hand master intended for rapid verification of metric ISO fine threads in production and inspection environments, ensuring out‑of‑tolerance threads are identified before assembly. No‑go thread plug gauge M78x2, right‑hand Hardened gauge steel construction Calibrated with certificate included Conforms to DIN 13, 6H Reliable rejection control for consistent production quality The no‑go inspection tool delivers an immediate, tangible decision on whether a threaded bore meets the required limits. By employing a no‑go gauge manufactured from hardened gauge steel and produced to DIN 13, 6H, this inspection device shortens inspection cycles and reduces the risk of assembly failures. Using a tactile, binary check instead of subjective measurement speeds up quality gates and lowers the rate of latent defects that reach downstream assembly. Simple to use, clear to interpret — minimises operator uncertainty Designed as a dedicated plug gauge, the instrument represents the "reject" side of a go/no‑go pair. The method is straightforward: the master should not enter a conforming thread; any fit indicates non‑conformity. Marked as M78×2.0 and manufactured for right‑hand thread inspection, the gauge requires no complex setup and can be used at workstations or in inspection benches. Delivery includes a calibration certificate, which documents traceability and supports process audits and quality records. Durable construction that preserves accuracy and repeatability Made from hardened gauge steel, the gauge resists wear and maintains its manufactured limits across repeated cycles, preserving the calibration interval and ensuring reproducible results. The compact, robust design supports frequent handling in workshop conditions without sacrificing form stability. When integrated into standardised routine checks, the plug gauge helps maintain part conformity and reduces rework and scrap, contributing to a more efficient production flow and lower overall cost of quality. Contact Metav Werkzeuge for specification support or to arrange procurement of the M78×2.0 no‑go thread plug gauge and receive advice tailored to the production context. Technical data SKU: M315.678.7 GTIN: 4054469153506 Material: hardened gauge steel Thread size: M78 x 2.0 Thread form / tolerance: DIN 13, 6H Weight: 2 kg Customs tariff number: 90173000 Facts Right‑hand metric ISO fine thread No‑go (reject) plug gauge function Calibrated; calibration certificate included Intended for production and incoming inspection Special features Durable, hardened construction for extended service life Simple go/no‑go decision principle for quick checks Suitable for integration into standard quality procedures Designed to reduce assembly rejects and rework FAQ What is the purpose of this plug gauge? The plug gauge is a no‑go thread plug gauge M78×2.0 intended to detect threads that exceed allowable limits so that out‑of‑tolerance parts are rejected before assembly. Is a calibration certificate supplied with the gauge? Yes, the gauge is delivered with a calibration certificate that documents the inspection status and traceability for quality records. Which standard does the gauge conform to? The gauge is manufactured to DIN 13, 6H for metric ISO fine threads, ensuring compatibility with standard thread tolerances. Can this gauge be used for left‑hand threads? This specific master is produced for right‑hand thread inspection; left‑hand applications require the corresponding left‑hand gauge. How does the no‑go check work in practice? The no‑go plug should not enter a conforming bore; any fit indicates the thread exceeds permissible dimensions and must be classified as reject. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7x0.5 Thread Go/No-Go Ring Gauge, ISO Metric Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of precise, repeatable thread inspection with a compact M7×0.5 ring gauge made from hardened gauge steel and produced to DIN 13, 6g tolerances; this combination reduces rework and speeds pass/fail decisions on the shop floor. Order directly via Metav Werkzeuge or consult our specialists for batch needs. Thread go/no-go ring gauge M7×0.5 — Hardened gauge steel, DIN 13 (Metav IndustryLine) The Thread go/no-go ring gauge M7×0.5 is a purpose-built inspection ring for fast control of metric ISO fine threads in production and quality assurance environments. M7×0.5 metric ISO fine thread Hardened gauge steel construction DIN 13 tolerance class 6g Reliable checks that keep production moving A compact, dedicated M7×0.5 ring gauge replaces time-consuming measurement steps with an immediate go/no-go decision, improving throughput without sacrificing accuracy. Made from hardened gauge steel and manufactured to the DIN 13 standard, the device provides a robust, wear-resistant contact surface that maintains dimensional integrity through repeated use. For workshop workflows where fast acceptance sampling is required, the ring gauge offers a rational, low-effort method to enforce thread quality limits and reduce downstream rework costs. Clear pass/fail logic for consistent quality The core benefit of the go/no-go concept is unambiguous evaluation: a part either fits the "go" limit or is rejected by the "no-go" condition. This simplicity reduces subjective interpretation and operator variance in quality checks. In practice, the ring gauge acts as a tactile comparator that complements dimensional inspection tools, allowing frequent sampling without interrupting machining cycles. The straightforward nature of the gauge supports reliable statistical process control and shortens inspection times. Engineered for workshop durability and ease of use The ring gauge's construction focuses on robustness and repeatability. The hardened material resists surface wear, which preserves the functional limits defined by the standard. Its small footprint makes the gauge easy to handle and store at the inspection bench or close to machining centres, so routine checks become part of the production rhythm rather than an occasional overhead. The result is reduced measurement uncertainty and fewer non‑conforming parts entering assembly or dispatch. Where this gauge delivers most value Designed for inspection of metric ISO fine threads, the ring gauge is suited to fastener manufacture, component assembly, maintenance shops and quality departments that require quick, reliable accept/reject decisions. Conformance to DIN 13 with tolerance class 6g makes the gauge appropriate for standardised thread checks in industrial environments where consistent interchangeability and process stability are priorities. The compact ring is particularly useful when inline checks are needed without setting up elaborate measurement systems. Contact Metav Werkzeuge today to order the Metav IndustryLine M7×0.5 ring gauge or to discuss quantity and delivery options from our Emmerich distribution centre Technical data SKU: M315.207.2 GTIN: 4061905047787 Thread: M7×0.5 Standard: DIN 13, 6g Material: hardened gauge steel Brand: Metav IndustryLine Facts Nominal size: M7 Pitch: 0.5 mm Tolerance class: 6g Standard reference: DIN 13 Special features Go/no-go ring gauge (accept/reject) Hardened gauge steel for wear resistance For inspection of metric ISO fine threads Compact format for shop‑floor sampling FAQ What thread size does this gauge inspect? The thread go/no-go ring gauge M7×0.5 is specified for M7×0.5 metric ISO fine threads and conforms to DIN 13 with tolerance class 6g. Is this gauge suitable for serial production checks? Yes, the Metav IndustryLine M7×0.5 ring gauge M315.207.2 is designed for rapid, repeatable pass/fail checks in production and quality control routines. What material is used for the ring gauge? The gauge is manufactured from hardened gauge steel to ensure long‑term resistance to wear and stable inspection limits. How is the go/no-go principle applied with this ring gauge? The "go" limit confirms acceptable thread form and size by allowing entry, while the "no-go" condition prevents acceptance of over‑sized or out‑of‑tolerance threads, providing a simple binary evaluation. Which applications benefit most from this gauge? This gauge is particularly useful in fastener production, component inspection, assembly controls and any workshop requiring quick verification of metric ISO fine threads Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7x0.5 Thread Ring Gauge Go Metric ISO Fine Right-Hand DIN 13 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of fast go/no‑go checks and a robust hardened construction to keep thread inspections efficient and reproducible; order directly via Metav Werkzeuge or consult our technical team for specification support. Thread go ring gauge M7 x 0.5 mm — Go ring, hardened gauge steel (Metav IndustryLine) The Thread go ring gauge M7 x 0.5 mm is a compact inspection gauge for metric ISO fine threads, right‑hand, manufactured to DIN 13 with 6g tolerance for reliable production control. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g Designed for M7 × 0.5 mm metric fine threads Right‑hand "Go" ring for quick inspection Ensure conformance with a single tactile check A calibrated Go ring provides an immediate go/no‑go decision, simplifying routine checks on external threads and reducing downstream rework. By confirming that an external thread accepts the M7 x 0.5 mm go ring, the inspection confirms compliance with DIN 13 tolerance class 6g, which is commonly specified for metric fine threads. This clear pass criterion shortens inspection time in incoming goods checks and on‑machine controls, translating into measurable productivity gains on the shop floor. Robust material and geometry for repeatable measurements Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional integrity through repeated use, ensuring repeatable results over many inspection cycles. The compact design and low mass support rapid handling—useful for high‑throughput inspection stations—while the precision finish of the measuring surface preserves the functional limit characteristics required for a reference "Go" gauge. The result is a durable tool that sustains measurement certainty and reduces the frequency of replacement. Practical integration into quality workflows The ring is suited to workshop inspection, assembly line sampling and incoming component acceptance where a straightforward pass/fail criterion speeds decisions. Traceability and clear identification of the gauge support documented quality processes; the compact nature of the tool also makes storage and transport between workstations uncomplicated. For customers specifying metric ISO fine threads in jigs, fixtures or components, this gauge offers a direct, standards‑based instrument to embed into inspection plans. For standardised thread verification, request the Metav IndustryLine M7 go ring via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for enquiries and technical advice Technical data Article number: M315.107.2 SKU: M315.107.2 GTIN: 4054469123844 Eclass: 21170214 Customs tariff number: 90173000 Weight: 0.06 kg Facts Thread size: M7 × 0.5 mm Tolerance standard: DIN 13, 6g Handedness: Right‑hand thread Special features Material: hardened gauge steel Type: Go ring gauge for external threads Application: inspection of metric ISO fine threads Intended use: production control and incoming inspection FAQ What is the primary use of this gauge? The Thread go ring gauge M7 x 0.5 mm is used for quick go/no‑go checks of external metric ISO fine threads to verify conformity with DIN 13 (6g). Which materials is the gauge suitable for inspecting? The gauge itself inspects thread geometry regardless of workpiece material; the Thread go ring gauge M7 x 0.5 mm is applied to steel, aluminium, brass and other materials provided the thread form matches M7 × 0.5 and the tolerance class is 6g. How does the "Go" ring indicate conformity? A successful fit of the go ring signifies that the external thread meets the maximum material limits defined by the DIN 13 6g specification; rejection occurs when the ring does not engage fully. Is the gauge traceable for quality records? The Thread go ring gauge M7 x 0.5 mm is identified by SKU and GTIN, supporting traceability in inspection records and integration into quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7x0.75 Limit Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, precise metric thread verification and conformity to DIN 13, 6H for reliable go/no-go testing; order the limit gauge directly via Metav Werkzeuge or consult our specialists for suitability and rapid supply. Limit thread plug gauge M7 x 0.75 mm — hardened gauge steel, DIN 13, 6H (Metav IndustryLine) A limit thread plug gauge M7 x 0.75 mm designed for right-hand metric ISO fine threads, intended for fast and repeatable verification of internal threads in production and quality control. Hardened gauge steel construction Manufactured to DIN 13, 6H For right-hand metric fine threads Compact plug gauge for repeatable checks Reliable compliance for internal threads The gauge is engineered as a go/no-go plug gauge to confirm that internal threads meet the dimensional and tolerance requirements of DIN 13, 6H. By providing a clear accept/reject result without interpretation, the tool reduces inspection time and lowers the risk of non-conforming parts progressing through the process. The solid, hardened gauge steel body ensures that the reference dimensions remain stable under frequent handling, which supports consistent production throughput and fewer quality incidents. Practical benefit in daily inspection routines As a compact inspection instrument for fine metric threads, the plug gauge offers immediate feedback for operators carrying out batch checks or final inspection. The specific M7 x 0.75 mm designation matches common fine-thread applications in fastening and component assembly, enabling quick matching to technical drawings and work orders. The limited handling and simple go/no-go action shorten training time and allow repeatable checks to be performed at-line rather than in a separate measuring room, helping to speed up decision-making on the shop floor. Durable design that supports traceability and process efficiency Made from hardened gauge steel and finished for stable contact, the plug gauge is suited to routine use in machine shops, maintenance departments and quality laboratories. The compact format and low mass make it straightforward to store and transfer between stations. When incorporated into a standard inspection plan, this type of limit gauge contributes to measurable improvements in first-pass yield and reduces the need for rework by catching thread errors early. The clear specification and standard conformity also simplify documentation and audit traces for procurement and quality teams. For expert advice on integrating this limit gauge into inspection procedures or to secure supply from Metav Werkzeuge in Emmerich, please contact our consultants for tailored recommendations and delivery options. Technical data Article number: M315.007.3 GTIN: 4054469122175 Tariff number: 90173000 ECLASS: 21170235 Numbers / Core technical data Thread designation: M7 x 0.75 mm Weight: 0.05 kg Right-hand thread Compliance: DIN 13, 6H Special features / Material Material: gauge steel, hardened Type: limit plug gauge (go/no-go) Suitable for inspection of internal threads Compact format for routine shop-floor checks FAQ What is the intended use of this plug gauge? The limit thread plug gauge M7 x 0.75 mm is intended for go/no-go verification of right-hand internal metric threads to confirm conformity with DIN 13, 6H. Does the gauge indicate acceptance at a glance? Yes, the plug gauge provides a direct go/no-go result; the go end and no-go end are used to check whether an internal thread falls within the permitted tolerance band. What material and hardness are used for the gauge? The gauge is manufactured from hardened gauge steel, ensuring dimensional stability and resistance to wear during repeated inspections. Can this gauge be used in process control on the shop floor? Certainly — the compact, robust design makes it suitable for at-line and workshop inspection to support fast decision-making and reduce rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7x0.75 Thread Gauge Ring For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Combining DIN 13 traceability with hardened gauge steel and a compact mass ensures fast, reproducible thread assessment on the shop floor; order the thread ring gauge directly via Metav Werkzeuge or consult our advisers if clarification is required. Thread ring gauge M7 x 0.75 mm (Go) — DIN 13, hardened gauge steel — Metav IndustryLine A thread ring gauge M7 x 0.75 mm (Go) designed for rapid pass/fail inspection of metric ISO fine threads in production and quality-control environments. DIN 13 standard, tolerance class 6g Hardened gauge steel for dimensional stability Go ring for M7 x 0.75 mm metric fine threads Compact, low-mass design — 0.06 kg Reliable pass/fail inspection for metric fine threads The go ring functions as a straightforward acceptance test: the gauge must enter a threaded component without excessive force if the thread meets the nominal form and tolerance. Built to DIN 13 with tolerance class 6g, this ring delivers a clear go/no-go decision that removes ambiguity from routine checks and speeds up quality control. The simple mechanical test is ideal where cycle time and reproducibility matter, such as batch production or incoming inspection. Durable construction reduces rework and downtime Manufactured from hardened gauge steel, the ring resists wear and preserves its dimensional integrity over repeated use. The heat-treated surface and robust material selection mean fewer replacements and consistent behaviour under contact stress. At a mass of 0.06 kg, the component is easy to handle and simple to fit into inspection jigs or control benches, while maintaining the stiffness required for reliable engagement with M7 threads. Efficient integration into inspection routines A tactile, no-electronics solution, the gauge speeds decisions on the shop floor without additional measurement equipment. Its mechanical nature reduces training overhead: operators learn a single, repeatable procedure for checking metric ISO fine threads. The compact format makes it suitable for inspection benches, toolrooms and mobile calibration kits where fast throughput and low equipment footprint are priorities. Typical uses and compatibility with workshop needs Designed for right-hand metric ISO fine threads, the ring suits machine shops, contract manufacturers and maintenance departments that require a robust, standardised check for M7 × 0.75 mm threads. The device is intended for go/no-go assessment rather than detailed dimensional analysis; for traceable measurement data, complement the ring with calibrated gauging equipment or CMM inspection when necessary. For a reliable thread-checking solution from Metav IndustryLine, contact Metav Werkzeuge for the M7 go ring and expert advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.107.3 GTIN: 4054469123851 Weight: 0.06 kg Material: hardened gauge steel Thread size: M7 x 0.75 mm Standard: DIN 13, 6g Core measurements Nominal diameter: M7 Pitch: 0.75 mm Tolerance class: 6g Mass: 0.06 kg Special features Go ring (go/no-go function) Right-hand metric ISO fine thread Category: thread gauges Customs tariff number: 90173000 FAQ What is the intended use of this gauge? The thread ring gauge M7 x 0.75 mm (Go) is intended for pass/fail inspection of right-hand metric ISO fine threads in production and quality control. Which standard does the gauge comply with? The ring gauge conforms to DIN 13 with tolerance class 6g, ensuring compatibility with widely accepted thread tolerance definitions. What material is the gauge made from? The gauge is made of hardened gauge steel, selected to provide dimensional stability and long service life under repeated engagement. Is this a measuring instrument for precise dimensional data? No; the ring is a go/no-go gauge for quick acceptance testing. For traceable dimensional measurements, use calibrated measuring instruments alongside the gauge. How light is the gauge and how does that affect handling? With a mass of 0.06 kg, the gauge is compact and easy to handle, suitable for manual inspection and integration into small inspection kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7x1 Thread Go Gauge Right-Hand For Metric ISO Regular Thread, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of reliable thread inspection through the combination of hardened gauge steel, conformity to DIN 13 (6H) and a compact, lightweight format that supports rapid in‑process checks; order directly via Metav Werkzeuge or consult the team for specification advice. Limit thread plug gauge M7 x 1 mm – Metav IndustryLine A limit thread plug gauge M7 x 1 mm for fast verification of metric ISO standard right‑hand internal threads in production and quality control environments. Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6H Right‑hand M7 x 1 metric thread size Consistent pass/fail decisions on the shop floor A compact limit plug delivers reproducible inspection results for internal threads without elaborate setup. The M7 x 1 mm size and 6H tolerance make this gauge suitable for routine checks of standard metric ISO threads in machining and assembly. Constructed from hardened gauge steel, the instrument resists wear and preserves inspection accuracy over many cycles, reducing the need for frequent replacement and lowering process interruptions. The lightweight nature (approx. 0.05 kg) aids handheld use and quick sampling across components, which supports faster quality gates and fewer production holds. Clear conformity and traceable inspection practice Compliance with DIN 13 ensures the gauge matches established thread form and tolerance conventions, simplifying documentation and audit trails. The tool is intended as a reference for the acceptance of internal threads: it confirms whether a threaded bore meets the specified metric standard or requires rework. Using a standardised plug avoids ambiguous gauging outcomes and helps maintenance of process capability data. The rugged finish and hardened material also make the gauge resilient to everyday workshop conditions, aiding long‑term consistency of results. Practical fit for workshops and inspection benches Designed for straightforward handling, the gauge suits both bench inspection in quality departments and quick checks at machineside. The right‑hand thread geometry corresponds to common fastener standards, reducing part sorting and rework. As part of a measured quality workflow, this gauge supports efficient decision‑making and contributes to minimised scrap rates. For operations consolidating suppliers, the gauge integrates into a basic set of inspection tools that balance reach, stiffness and operability for general engineering applications. Contact Metav Werkzeuge in Emmerich for guidance on Metav IndustryLine limit gauges and to arrange fast supply or specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.007 GTIN: 4054469122168 Category: Lehren / Messstifte Facts Thread size: M7 x 1 mm Weight: 0.05 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance 6H Thread direction: right‑hand Manufacturer brand: Metav IndustryLine FAQ What thread form does this gauge check? The limit thread plug gauge checks metric ISO standard internal threads to DIN 13, suitable for standard right‑hand M7 x 1 mm bores. Is the material durable for frequent use? Yes, the plug gauge is made from hardened gauge steel so the M7 x 1 mm gauge maintains form and wear resistance under regular inspection cycles. Can this gauge be used on all workshops? This limit plug is intended for production and inspection benches; the compact design supports machine‑side sampling and small workshop environments. What tolerance class is covered by the gauge? The instrument conforms to the 6H tolerance specification of DIN 13, providing a recognised acceptance criterion for internal threads. How is the gauge identified in stock and documentation? The item is supplied as Metav IndustryLine limit thread plug gauge, SKU M315.007, GTIN 4054469122168 for inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M7x1 Thread Ring Gauge Go, DIN 13 6g, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise thread verification, durable hardened gauge steel, and conformity to DIN 13, 6g for repeatable production control. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Thread ring gauge M7 x 1 — DIN 13 6g, hardened gauge steel (Metav IndustryLine) A thread ring gauge M7 x 1 designed for inspection of metric ISO regular threads in right‑hand form, ideal for routine quality checks and production control. Metric ISO thread M7 x 1, DIN 13 6g Hardened gauge steel for extended service life Right‑hand form for standard production checks Consistent conformance to metric standards A ring gauge made to DIN 13 and tolerance 6g provides a clear, measurable basis for pass/fail decisions during incoming inspection and in-process control. The nominal size M7 x 1 and its 1 mm pitch are verified against the standard thread geometry, which means the tool is suitable for confirming that external threads meet dimensional and form requirements. Using a dedicated inspection ring reduces ambiguity in quality verdicts and shortens inspection cycles, supporting a predictable manufacturing flow and lower scrap rates. Robust construction for long service life Manufactured from hardened gauge steel, this inspection ring is engineered for repeated use in workshop and production environments. The hardened material resists wear and preserves the gauging surface, which sustains measurement reliability over many inspection cycles. A durable gauge reduces the frequency of replacement and contributes to steady quality assurance costs. The compact, single‑piece design ensures straightforward handling and minimal maintenance while keeping the reference geometry stable under normal use. Practical application in workshop and production This inspection ring serves as a practical control instrument for metric ISO external threads in serial production and sample testing. The right‑hand orientation matches standard thread directions commonly encountered in fasteners and machined shafts. As a simple go/no‑go style reference, it integrates easily into established QC routines and documentation workflows. When combined with clear inspection protocols, the gauge helps maintain process stability and supports traceable quality statements on batch conformity. Secure consistent thread quality with the Metav IndustryLine ring gauge—contact Metav Werkzeuge in Emmerich for purchasing and technical advice Technical data Article number: M315.207 SKU: M315.207 GTIN: 4054469125503 ECLASS: 21170214 Customs tariff number: 90173000 Standard: DIN 13, 6g Thread size: M7 x 1 Material: gauge steel, hardened Orientation: right‑hand metric ISO thread Numbers / Core technical data Nominal diameter: M7 Pitch: 1 mm Tolerance class: 6g GTIN: 4054469125503 Customs tariff number: 90173000 Special features Hardened gauge steel For metric ISO regular threads Right‑hand orientation Intended for thread inspection and quality control Category: Gauges / Inspection rings FAQ What tolerance and standard does the gauge verify? The thread ring gauge checks metric ISO threads to DIN 13 with tolerance class 6g, confirming dimensional conformance for M7 x 1 external threads. Is the gauge suitable for repetitive workshop use? Yes — the ring is made from hardened gauge steel, providing wear resistance for routine production and inspection cycles while maintaining the reference geometry. Can this ring gauge measure internal threads? No — this is an external inspection ring intended to verify the external thread form; internal threads require a plug gauge or appropriate internal reference. Which product and SKU should be referenced for ordering? Reference the Thread ring gauge M7 x 1 from Metav IndustryLine, article number M315.207, for precise correspondence when ordering or documenting inspections. How should the inspection ring be cared for to preserve accuracy? Keep the gauge clean and free of chips and corrosion, store it in a dry, protected environment when not in use, and follow routine visual checks; periodic calibration is recommended according to internal quality procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 x 0.5 Thread Plug Gauge Metric ISO Fine Thread Right Hand DIN 13, 6g Hardened Gauge Steel - Metav IndustryLine
Take advantage of a compact, standards-compliant inspection tool that combines rapid pass/fail checking with long-term wear resistance — ideal for inline quality control of metric fine threads. Order the thread gauge directly via Metav Werkzeuge or consult our specialists for integration guidance. Thread ring gauge M8 x 0.5 (GO) — DIN 13, 6g A Thread ring gauge M8 x 0.5 (GO) for quick conformity checks of right-hand metric ISO fine threads in production and inspection environments GO thread ring gauge M8 x 0.5, metric fine thread Hardened gauge steel for durable wear resistance Conforms to DIN 13, tolerance 6g Right-hand thread, immediate go/no-go result Rapid, reliable go/no-go inspection for fine threads A dedicated GO gauge delivers an unambiguous pass/fail decision at the point of inspection, removing interpretation from routine checks. The ring is specified for M8 x 0.5 metric fine threads and manufactured to DIN 13 with tolerance class 6g, which defines the target form and limits for mating external threads. Using a ring gauge in the shop or at the inspection bench shortens cycle time: a simple attempt to engage the ring confirms conformity, enabling efficient sorting of acceptable parts and early detection of production drift. Robust construction reduces downtime and rework Manufactured from hardened gauge steel, the ring resists wear from repeated engagement and retains its conformity longer than untreated components. The material choice and heat treatment reduce the need for frequent replacement, which in turn lowers maintenance intervals and cost per inspection. The compact design and solid construction make this a practical tool for daily use in quality control stations where reliability and repeatability matter. Standards-based measurement supports traceable quality processes Compliance with DIN 13 and the specified 6g tolerance class ensures the gauge aligns with common engineering standards for metric ISO fine threads. This alignment facilitates clear communication between production and quality departments and supports traceable inspection protocols. The GO ring is intended for direct comparative checks; it confirms the minimum acceptable size and form of mating external threads, forming part of a robust quality assurance workflow. Simple handling for efficient workflow integration The ring's right-hand threading and ergonomic size make it straightforward to use at the bench or inline. As a handheld inspection tool, it minimises setup time compared with dimensional measurement methods and is suited to rapid checks during batch production. For specific applications or thread system questions, the Metav technical team can provide advice on integrating ring gauges into existing inspection routines and recommend complementary control measures. Contact Metav Werkzeuge for specification advice on the M8 x 0.5 GO ring gauge and to arrange delivery from Emmerich — quote SKU M315.108.2 when enquiring Technical data Article number: M315.108.2 GTIN: 4054469123875 Size: M8 x 0.5 Core specifications Standard: DIN 13 Tolerance class: 6g Thread direction: right-hand Customs tariff number: 90173000 Materials & features Material: hardened gauge steel Type: GO (pass) thread ring gauge Category: thread gauges / ring gauges Intended use: conformity check for metric ISO fine threads FAQ What is the primary use of this ring gauge? The thread ring gauge M8 x 0.5 (GO) is used for quick pass/fail inspection of right-hand metric ISO fine external threads to confirm they meet the required form and minimum dimensions. What does "GO" mean on a ring gauge? GO indicates that the ring is the accept limit; if the mating external thread engages the GO ring, the part is within the acceptable lower size and form constraints defined for the thread. Which standards and tolerance class apply to this gauge? This ring is made to DIN 13 and the tolerance class 6g, providing compatibility with standard metric ISO fine-thread specifications. Can this gauge be used for left-hand threads? No, this specific ring is manufactured for right-hand threads only; left-hand thread inspection requires a corresponding left-hand gauge. How should the gauge be stored and maintained? Keep the ring clean and dry, inspect it visually for wear before use, and store it in a protective tray or box to preserve the hardened surface and thread form. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 x 0.75mm Limit Thread Plug Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a compact, standardised checking tool that combines DIN 13 conformity, a hardened gauge-steel construction and the precise M8 x 0.75 mm thread geometry to reduce inspection time and reject rates; order directly via Metav Werkzeuge or contact our consultants for application advice. Limit thread gauge plug M8 x 0.75 mm — metric ISO fine thread, right-hand, Metav IndustryLine Limit thread gauge plug M8 x 0.75 mm is a go/no-go style checking pin for verifying internal metric ISO fine threads in production and inspection environments Hardened gauge steel construction For M8 x 0.75 mm metric fine threads Conforms to DIN 13 tolerance class 6H Reliable conformity checks to cut rework and downtime The instrument serves as a single-purpose limit thread gauge plug that provides a quick, objective decision on thread acceptance. By matching the M8 x 0.75 mm nominal diameter and pitch to the DIN 13 specification with tolerance class 6H, the device removes ambiguity from go/no-go checks and supports consistent outcome documentation. The measurable, repeatable check reduces machine downtime and scrap, enabling process control teams to make faster, evidence-based decisions. Robust design for regular shop-floor handling Manufactured from hardened gauge steel, the plug resists wear from frequent use and maintains dimensional stability over many cycles; its compact mass (0.05 kg) keeps handling comfortable during rapid inspection sequences. The right-hand thread geometry mirrors production parts and allows direct verification without adapters, which simplifies the inspection routine and lowers the risk of incorrect gauges being used. This durability translates into fewer replacements and steadier long-term measurement performance. Practical integration into inspection workflows Suited to bench inspection, assembly checks and incoming goods control, the gauge plug streamlines standardised thread validation across small-batch and volume production. Its simple pass/fail principle fits lean quality systems and complements digital traceability when combined with existing audit procedures. Supplied under the Metav IndustryLine umbrella, the tool aligns with a service philosophy that makes precision accessible to workshops and industrial users alike, supporting operational reliability and confidence in component conformity. Contact Metav Werkzeuge today to discuss incorporation of the Metav IndustryLine limit thread gauge plug into inspection plans and to obtain guidance tailored to production tolerances and quality workflows Technical data SKU: M315.008.3 GTIN: 4054469122205 Thread size: M8 x 0.75 mm Tolerance class: DIN 13, 6H Material: gauge steel, hardened Weight: 0.05 kg Facts Nominal diameter: 8 mm Pitch: 0.75 mm Tariff number: 90173000 Special features Right-hand thread For metric ISO fine thread applications Product category: limit gauge plug Brand: Metav IndustryLine FAQ What is the primary function of this gauge? The limit thread gauge plug checks internal metric threads for acceptance by providing a clear go/no-go outcome; the Metav IndustryLine gauge plug for M8 x 0.75 mm verifies conformity to DIN 13, 6H. Which thread types are compatible? Designed specifically for metric ISO fine threads with the M8 x 0.75 mm geometry and right-hand form, the gauge plug is intended for verification of matching internal threads. Is this gauge suitable for routine production inspection? Yes — the hardened construction and standardised dimensions make the Metav IndustryLine limit gauge plug appropriate for repetitive shop-floor checks and incoming inspection tasks. How should the gauge be handled to maintain accuracy? Store clean and dry, avoid impacts and abrasive contact, and inspect visually before use; the hardened material reduces wear but good handling preserves gauge life. Does the product include traceable identification for inventory and audits? The unit is supplied with SKU M315.008.3 and GTIN 4054469122205 for simple inventory control and audit traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 x 1 mm Go Thread Ring Gauge, DIN 13 6g, Right-Hand, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a DIN 13, 6g tolerance and hardened gauge steel construction to secure fast, repeatable acceptance checks for M8 x 1 mm metric fine threads; order the ring gauge directly via Metav Werkzeuge or contact our consultants for specification advice. M8 x 1 mm Go thread ring gauge (go), DIN 13, 6g — Metav IndustryLine M8 x 1 mm Go thread ring gauge designed for quick acceptance testing of metric ISO fine threads in production and inspection environments, right-hand orientation DIN 13 tolerance class 6g Hardened gauge steel construction For M8 x 1 mm metric fine threads Fast, standards-compliant thread acceptance that reduces rework The go gauge provides an immediate, binary result for thread acceptance: a pass indicates that the threaded part meets the specified DIN 13 form and size within tolerance class 6g, while a fail points to corrective action. This method is significantly faster than micrometric form checks for routine production sampling and supports clear decision-making on the shop floor. Where cycle time and reproducibility matter, a dedicated ring gauge streamlines quality control and helps avoid downstream rework and assembly problems. Built for repeatability and long service life in industrial use Manufactured from hardened gauge steel, the ring gauge resists wear and maintains dimensional stability across repeated use, ensuring consistent pass/fail thresholds. The material choice and heat treatment provide the surface hardness required for long-term contact with production threads, while the compact form supports easy handling and safe storage. For traceable measurement routines, a robust physical gauge reduces variability introduced by measurement set-ups and human factors, delivering higher reproducibility in routine checks. Practical to integrate into production and inspection workflows The simple acceptance check offered by this ring gauge makes it suitable for inline inspection, incoming goods control and final assembly stations. Its nominal size and pitch—M8 x 1 mm—match metric ISO fine-threaded components commonly found in mechanical assemblies. Using a calibrated go gauge as a first-line control speeds throughput and clarifies quality criteria for operators, while the compact design fits standard gauge racks and tool kits for immediate accessibility during run-time checks. For consistent thread control in production, request this Metav IndustryLine ring gauge from Metav Werkzeuge or consult our technical team in Emmerich for delivery and specification details. Technical data Article number: M315.108.4 GTIN: 4054469123899 Thread size: M8 x 1 mm Weight: 0.06 kg Norm: DIN 13, 6g Core specifications Thread pitch: 1 mm Nominal diameter: M8 Tolerance class: 6g Tariff number: 90173000 Special features Go gauge for metric ISO fine threads Right-hand thread orientation Hardened gauge steel Suitable for production and inspection use Category: Gauges / Checking instruments FAQ What is the primary function of this ring gauge? The ring gauge is a dedicated go gauge for fast acceptance testing of M8 x 1 mm metric ISO fine threads; it verifies that the external thread fits within the DIN 13, 6g limits. Does the gauge indicate the thread pitch and size directly? Yes. The gauge is specified for M8 x 1 mm threads (nominal diameter M8, 1 mm pitch) and confirms whether the threaded part meets the dimensional requirements of that size and pitch. What material is the gauge made from and why? The tool is made from hardened gauge steel, chosen for wear resistance and dimensional stability, which preserves the gauge geometry during repeated use and handling. Is this ring gauge suitable for shop‑floor pass/fail checks? The design and tolerance class make it ideal for routine shop-floor acceptance testing, inline inspections and final assembly checks where a clear pass/fail decision is required. How should the gauge be cared for to ensure long life? Keep the gauge clean and dry, store it in a protective case or rack to avoid knocks, and inspect periodically for wear. Replace if wear affects fit; a hardened gauge prolongs service life under normal use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 x 1 Thread Gauge Go Ring Metric ISO Fine Thread Right Hand, Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Gain fast, reliable verification of M8 x 1 mm metric ISO fine threads with a hardened gauge steel ring built to DIN 13 (6g) tolerances; compact, durable and ideal for rapid go/no-go checks on the shop floor. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thread gauge ring M8 x 1 mm (DIN 13, 6g) — Metav IndustryLine The Thread gauge ring M8 x 1 mm provides quick go/no-go verification of right-hand metric ISO fine threads for production and inspection environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M8 x 1 mm metric ISO fine thread Lightweight 0.04 kg for easy handling Faster, certified thread checks that reduce rework The compact thread ring gauge allows immediate confirmation of internal thread form and pitch, delivering rapid pass/fail decisions at the point of assembly. Built to DIN 13 (6g), the ring verifies the critical envelope for metric ISO fine threads, which translates into fewer production interruptions and reduced scrap rates. The go/no-go concept means inspections are unambiguous: the gauge either fits (accept) or it does not (reject), enabling workplace efficiency and clear quality criteria without lengthy measurements. Robust construction for daily workshop use Made from hardened gauge steel, this ring resists wear and maintains its form across repeated checks, supporting consistent results over time. At just 0.04 kg, the device is lightweight and easy to handle during high-throughput inspections while still providing the stiffness required for reliable contact with the thread flanks. Its right-hand, fine-thread form factor suits assembly verification of small fasteners and precision components, making it a practical tool for both production lines and final inspection benches. Standardised tolerance and traceable process control Conformity with DIN 13 (6g) ensures that thread acceptance is based on recognised industrial standards, simplifying documentation and supplier communication. Using a dedicated ring gauge speeds up statistical process control and supports consistent sampling plans. The robust design and standardised tolerance contribute to traceable quality checks that can be integrated into existing inspection routines, helping to demonstrate compliance and minimise customer returns. For reliable, standard-compliant thread verification, contact Metav Werkzeuge to discuss the Metav IndustryLine M8 x 1 mm thread gauge ring (SKU M315.208.4) and to arrange a tailored supply to suit production needs — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.208.4 GTIN: 4054469125558 Nominal size: M8 x 1 mm Weight: 0.04 kg Tariff number: 90173000 Facts Tolerance class: 6g Standard: DIN 13 Thread pitch: 1 mm Thread direction: right-hand Special features Material: hardened gauge steel Function: no-go (reject) thread check Application: metric ISO fine threads Category: thread ring gauge FAQ What does the DIN 13 (6g) marking indicate? The DIN 13 (6g) designation specifies the standardised tolerance and fit for metric ISO threads; it means the M8 x 1 mm ring is manufactured to the DIN 13 (6g) acceptance envelope for right-hand fine threads. Is this a go or no-go gauge? This ring serves the no-go (reject) verification function, allowing quick confirmation that internal threads exceed the permissible envelope. What material is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure prolonged service life under routine inspection. Can this ring check left-hand threads or other sizes? This specific item is for right-hand M8 x 1 mm metric ISO fine threads; left-hand or other sizes require the corresponding ring gauges. How should the gauge be used to ensure consistent results? Use the ring with light, controlled engagement onto the thread; the go/no-go principle provides unambiguous acceptance criteria without complex measurement, and routine checks should be documented as part of quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8 x 1.25 Thread Ring Gauge Right-Hand ISO Metric, Go, DIN 13, Hardened Gauge Steel - Metav IndustryLine
Taking advantage of a hardened gauge steel construction together with the DIN 13 tolerance class 6g, this thread ring gauge provides reliable verification of ISO metric external threads while supporting consistent production quality; order or request stock information directly via Metav Werkzeuge for rapid fulfilment and expert advice. Thread ring gauge M8 x 1.25 — ISO metric external thread verifier, DIN 13, tolerance 6g (Metav IndustryLine) A thread ring gauge M8 x 1.25 designed for checking right‑hand external ISO metric threads to DIN 13; suitable for workshop and production use where fast, repeatable confirmation of thread conformity is required. Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g For ISO metric external threads (M8 x 1.25) Compact and lightweight at 0.1 kg Ensure conformity with clear, measurable standards Designed for direct verification of ISO metric external threads, this gauge follows DIN 13 with the 6g tolerance class to give an objective pass/fail assessment for M8 x 1.25 threads. The use of standardised tolerance nomenclature means inspection results are immediately comparable across suppliers and production stages, reducing ambiguity in quality checks. By using a dedicated thread ring, traceability of inspection outcomes is improved and process non‑conformances can be addressed promptly. Built for longevity and consistent performance Manufactured from hardened gauge steel, the ring is intended for repeated use in production and inspection environments. The material choice minimises wear on the mating profile, helping to keep the threaded form stable over many cycles and maintaining measurement reliability. With a compact mass of 0.1 kg, the gauge is easy to handle and stores conveniently in inspection kits, while still offering the stiffness required for accurate verification of external thread form. Practical integration into quality procedures The gauge is supplied with clear identification for inventory and traceability: SKU M315.208 and GTIN 4054469125527 support streamlined ordering and record keeping. As a purpose‑built inspection tool for ISO metric threads, it fits naturally into incoming inspection, first article verification and routine process checks. Using standard gauges accelerates decision making on acceptance or rework and supports documented quality systems without adding complexity. For stock availability and tailored advice on Metav IndustryLine thread ring gauges, contact Metav Werkzeuge in Emmerich for prompt delivery and professional specification support. Technical data Article number: M315.208 GTIN: 4054469125527 Tariff code: 90173000 Measurements & tolerances Thread size: M8 x 1.25 Tolerance class: 6g (DIN 13) Weight: 0.1 kg Materials & features Material: hardened gauge steel Thread direction: right‑hand Category: gauges / inspection tools FAQ What standard does this gauge conform to? The thread ring gauge conforms to DIN 13 and applies the 6g tolerance class for ISO metric external threads, ensuring standardised assessment of M8 x 1.25 threads. Is the material suitable for regular production use? Yes, the gauge is made from hardened gauge steel, which is chosen to resist wear under frequent use and to maintain the thread profile over many inspection cycles. How is the product identified for reordering or documentation? Identification is provided via SKU M315.208 and GTIN 4054469125527, which can be used for procurement and quality records. Can this gauge be used for left‑hand threads? This item is a right‑hand thread ring gauge for ISO metric external threads; left‑hand versions must be specified separately. What inspections is the gauge intended for? The gauge is intended for pass/fail verification of ISO metric external threads on production parts during incoming inspection, in‑process checks and final verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x1.5 Thread Go/No-Go Gauge For Metric Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, With Calibration Certificate - Metav IndustryLine
Combine hardened gauge steel construction with conformity to DIN 13, 6H and an included calibration certificate to secure consistent rejection decisions on ISO fine threads. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice and delivery options. Thread plug gauge (no‑go) M80 x 1.5 — ISO metric fine pitch, right‑hand — Metav IndustryLine Thread plug gauge (no‑go) M80 x 1.5 for fast verification of ISO metric fine threads in production and incoming inspection No‑go thread plug gauge M80 x 1.5 Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, 6H Ensuring reliable rejection where it matters A dedicated no‑go plug offers an objective, immediate decision at the control point: the gauge must not enter a correct internal thread. Designed for M80 x 1.5 ISO metric fine pitch threads, the tool defines the upper limit of acceptable dimensions and thus prevents false acceptances that could lead to assembly failures. The right‑hand orientation matches common production threads and supports consistent, repeatable checks on the shop floor. By using a simple go/no‑go principle, inspection time is reduced and process throughput is maintained without sacrificing measurement rigour. Built for repeatability and traceability Manufactured from hardened gauge steel, the gauge resists wear and preserves its profile under frequent use, ensuring long service life and stable tolerances. Production conformity with DIN 13, 6H standardises the acceptance criterion and simplifies documentation. The delivery includes a calibration certificate, providing traceability for internal quality records and audits. These features together reduce measurement uncertainty and support a documented quality regime — ideal for suppliers and workshops that must demonstrate documented control over thread quality. Practical integration into inspection routines The compact, robust design suits both incoming inspection and in‑process checks within assembly lines. As a single‑purpose thread gauge, it removes subjective judgement from acceptance testing: pass/fail is immediate and unambiguous, which benefits production managers and quality engineers seeking to lower rework rates. The tool’s durable construction and standardised dimensions also make it straightforward to store in inspection kits or trolleys and to include in first article inspection protocols. Traceable calibration simplifies regulatory compliance and customer reporting. Contact Metav Werkzeuge for delivery options, traceable calibration documents and expert advice on the Metav IndustryLine no‑go thread plug gauge M80 x 1.5 (SKU M315.680.6) Technical data SKU: M315.680.6 GTIN: 4054469152417 Weight: 2 kg Tariff number: 90173000 Facts Thread size: M80 x 1.5 Thread type: ISO metric fine pitch, right‑hand Standard: DIN 13, 6H Special features No‑go (reject) plug gauge Material: hardened gauge steel Supplied with calibration certificate Category: gauges / plug gauges FAQ What does a no‑go plug gauge check? A no‑go plug gauge verifies that an internal thread does not exceed the maximum permissible dimensions; if the no‑go gauge enters the thread, the part is rejected. Is the gauge suitable for fine‑pitch metric threads? Yes, this plug gauge is specified for M80 x 1.5 ISO metric fine pitch threads and is produced to the DIN 13, 6H standard. Does the gauge come with traceable documentation? The product is supplied with a calibration certificate, enabling traceability for quality records and audits. Can the gauge be used on right‑hand threads only? The item is manufactured for right‑hand metric threads; left‑hand versions would require a different gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x1.5 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Calibrated, DIN 13 6g - Metav IndustryLine
The combination of hardened gauge steel, a clear DIN 13, 6g tolerance class and an included calibration certificate provides reliable rejection checks for fine threads and supports traceable quality control; order the ring gauge via Metav Werkzeuge or consult Metav’s advisors for application-specific guidance. Thread ring gauge REJECT M80 × 1.5 — right‑hand, DIN 13, 6g (Metav IndustryLine) The Thread ring gauge REJECT M80 × 1.5 is a right‑hand ring gauge for practical verification of metric ISO fine external threads in production and incoming‑goods inspection. Hardened gauge steel construction Calibration certificate included Conforms to DIN 13, 6g Right‑hand M80 × 1.5 thread Precision where it matters: robust materials and standard conformity The ring offers a compact, purpose‑built solution when a clear reject decision is required. Manufactured from gauge steel, hardened, the component resists wear and keeps the measuring limit stable over repeated use. The DIN 13, 6g designation defines the tolerance window for metric external fine threads, so the gauge delivers measurements that align with established standards and enable consistent pass/reject evaluations. By using a purpose‑made thread ring rather than subjective measuring methods, process variability is reduced and inspection throughput is improved. Fast, repeatable inspection on the shop floor Designed as a rejection (Ausschuss) gauge, the ring provides an unambiguous check whether an external thread exceeds allowable limits. This function accelerates decision‑making during production runs and in quality control, cutting down time lost to manual re‑measurement. Supplied with a calibration certificate, the gauge records traceability and supports audit requirements; results from the tool can be referenced in quality documentation to demonstrate conformity. The combination of simple go/no‑go assessment and traceable calibration helps prevent the onward use of non‑conforming parts and lowers rework costs. Practical handling, durability and application scope The ring’s right‑hand design and nominal size M80×1.5 make it suitable for industrial use where larger fine threads occur. The hardened steel construction ensures long service life even under regular shop‑floor handling, and the ring’s mass supports stable seating during checks. As a basic, single‑purpose control instrument it integrates into existing inspection workflows without additional peripherals. For operations seeking a dependable, low‑complexity solution to separate conforming from non‑conforming threads, this gauge delivers reproducible results with minimal setup. Choose the Metav IndustryLine reject thread ring gauge for traceable, repeatable rejection checks and contact Metav Werkzeuge in Emmerich for tailored advice and sourcing from the European quality filter. Technical data Article number: M315.880.6 SKU: M315.880.6 GTIN: 4054469152899 Facts Weight: 2 kg Nominal thread: M80 × 1.5 Tariff number: 90173000 Special features Material: Gauge steel, hardened Tolerance class: DIN 13, 6g Hand: Right‑hand thread Calibration certificate included Reject (Ausschuss) ring gauge FAQ What is the primary purpose of this ring gauge? The ring gauge is designed as a reject control for metric ISO fine external threads; it verifies whether an M80 × 1.5 thread falls outside the permitted tolerance and should be rejected. How does the DIN 13, 6g marking affect use? DIN 13, 6g defines the tolerance class for external threads; the marking means the gauge matches that class and can be used to confirm conformity to the specified thread tolerance. Is a calibration certificate supplied with the gauge? Yes, the product is delivered with a calibration certificate, ensuring traceability for inspection records and audit purposes. What material is the ring made from and why does it matter? The gauge is manufactured from hardened gauge steel, which provides abrasion resistance and dimensional stability for prolonged accuracy under workshop conditions. Can this gauge check left‑hand threads? This particular ring is a right‑hand thread gauge; left‑hand threads require a dedicated left‑hand gauge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, With Calibration Certificate - Metav IndustryLine
Reliable thread inspection with hardened gauge steel and conformity to DIN 13, 6H ensures consistent production quality; the GO plug construction and included calibration certificate support traceable acceptance testing. Order the calibrated gauge directly via Metav Werkzeuge for fast delivery and professional documentation. Thread plug GO gauge M80 x 2.0 — GO plug for metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug GO gauge M80 x 2.0 is a right‑hand plug gauge for verifying metric ISO fine internal threads in production and incoming inspection. Calibrated with certificate Hardened gauge steel construction For M80 x 2.0 metric ISO fine thread Conforms to DIN 13, 6H Precision where conformity reduces rework A GO plug gauge delivers a definitive pass criterion for internal threads; the hardened gauge steel construction provides wear resistance and repeatable contact geometry for high-volume checking. By specifying DIN 13, 6H and the M80 x 2.0 thread form, the gauge gives a clear, measurable basis for accept/reject decisions, reducing set‑up time at the bench and the risk of scrap caused by ambiguous fit. The GO‑only design is efficient for fast line inspections where functional fit is the primary requirement. Robust design for production and inspection routines Built to withstand routine use, the plug gauge combines a solid, hardened steel body with a geometry intended for everyday workshop handling. The GO plug gauge format simplifies inspection cycles: the operator either passes the plug, confirming dimensional conformity, or does not, signalling intervention. This simplicity speeds throughput and improves statistical process control by generating unambiguous results that can be recorded in quality logs. The gauge’s right‑hand orientation matches common thread directions and helps avoid unnecessary handling errors. Traceable calibration and dependable documentation Delivered with a calibration certificate, the gauge supports traceability and documented quality assurance during audits. Traceable calibration coupled with the specified thread standard provides objective evidence for inspection records and supplier acceptance. Metav IndustryLine’s quality filtering at the Emmerich hub underpins reliable supply and consistent documentation, enabling shops and inspection departments to maintain compliance without complex verification procedures. For a calibrated, production‑ready GO plug gauge from Metav IndustryLine, contact Metav Werkzeuge to secure the M315.580.7 with full calibration documentation and prompt dispatch. Technical data Article number: M315.580.7 GTIN: 4054469153131 Weight: 2 kg Material: hardened gauge steel Standard: DIN 13, 6H Facts Thread size: M80 x 2.0 Tariff code: 90173000 Classification: 21170228 Special features GO plug gauge for internal thread checking Right‑hand thread For metric ISO fine threads Delivered with calibration certificate FAQ What is the intended use of this plug gauge? The plug gauge is designed for functional inspection of internal metric ISO fine threads; the GO plug confirms that an M80 x 2.0 internal thread meets the DIN 13, 6H acceptance condition. Does the gauge come with traceable calibration? Yes, the M315.580.7 is supplied with a calibration certificate for traceable documentation and acceptance records. Which material and standard apply to the gauge? The gauge is manufactured from hardened gauge steel and conforms to DIN 13, 6H for metric ISO fine threads. Is this a GO-only or GO/NO‑GO set? This item is a GO plug gauge (GUT), intended to verify that internal threads accept the GO dimension; NO‑GO functionality is not included with this SKU. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x2 Thread Go Gauge Metric ISO Fine Right-Hand Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a calibrated inspection tool that combines hardened gauge steel construction and conformity to DIN 13, 6g for fast, repeatable thread verification; order directly via Metav Werkzeuge or ask our consultants for application advice. Thread ring gauge GO M80 x 2.0 — metric ISO fine thread, right-hand (Metav IndustryLine) A Thread ring gauge GO M80 x 2.0 designed to verify metric ISO fine external threads in production and inspection environments, supplied as a calibrated GO ring. Calibrated with certificate Hardened gauge steel construction Conforms to DIN 13, 6g For metric M80 x 2.0 right-hand threads Fast, reliable verification for external threads A GO ring gauge provides an immediate pass/fail check of an external thread against the nominal geometry and tolerance class. The M80 x 2.0 gauge confirms that a shaft thread falls within the limits specified by DIN 13, 6g, enabling rapid quality decisions on the shop floor. Using a GO ring reduces inspection time compared with complex measurement routines and minimises scrap by identifying out-of-tolerance parts before assembly. The simple mechanical check is particularly effective for high-volume batches where throughput and repeatability are priorities. Durable construction that protects measurement integrity Manufactured from hardened gauge steel, this ring resists wear and maintains its form under repeated use, supporting consistent interrogation of thread form over long production runs. The chosen material and heat treatment lower the risk of dimension drift caused by surface damage, so results remain reproducible. A clear benefit is reduced rework and longer intervals between replacements, which supports predictable maintenance planning and cost control. The right-hand orientation and nominal size marking make handling straightforward during fast-paced inspection sequences. Traceability and conformity built into quality workflows The delivery includes a calibration certificate, providing documented traceability and evidence of conformity for internal quality records. That certificate helps integrate the gauge into quality management systems and supports audits where documented measurement assurance is required. For shops implementing standardised inspection plans, the ring gauge is a practical complement to laboratory measurements, offering a robust first-line control. When paired with systematic sampling or complementary NOGO checks, it strengthens process control and reduces the incidence of assembled failures. Contact Metav Werkzeuge today to discuss supply, calibration options and how the calibrated GO ring gauge M80 x 2.0 can be integrated into existing inspection routines Technical Data Article number: M315.780.7 GTIN: 4054469153728 Material: Gauge steel, hardened Thread size: M80 x 2.0 Facts Weight: 2 kg Tariff number: 90173000 Tolerance/class: DIN 13, 6g Special features GO ring gauge (GUT) Right-hand thread Calibration certificate included FAQ What is the primary purpose of this GO ring gauge? The Thread ring gauge GO M80 x 2.0 by Metav IndustryLine is used to perform quick pass/fail checks on external metric threads to confirm compliance with the nominal form and tolerance class DIN 13, 6g. Does the gauge come with official calibration documentation? Yes, the ring is supplied with a calibration certificate that documents traceability and the inspection status for quality records. Is this ring suitable for left‑hand threads? No, this particular gauge is manufactured for right‑hand threads only; left‑hand applications require the corresponding left‑hand gauge. Can the M315.780.7 gauge be used in production control routines? Metav IndustryLine’s M315.780.7 GO ring gauge is intended for shop‑floor process control and routine inspections, offering rapid verification to reduce cycle times and support reproducible acceptance criteria. What tolerance class does the gauge check against? The tool verifies external threads against DIN 13, 6g, ensuring compatibility with components specified to that tolerance class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x2 Thread Ring Gauge, Metric ISO Fine Thread Right-Hand, Go/No-Go, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise reject control through a hardened gauge steel build, clear DIN‑rated tolerancing and a supplied calibration certificate for documented inspection. Order the ring gauge directly via Metav Werkzeuge or consult our technical advisers for application support. Thread ring gauge AUSSCHUSS M80×2 — No‑go ring gauge for metric ISO fine threads, right‑hand (Metav IndustryLine) The AUSSCHUSS M80×2 no‑go ring gauge provides a fast, unambiguous check of external threads in production and inspection workflows, designed for metric ISO fine threads with right‑hand form. Hardened gauge steel construction For metric ISO fine thread M80×2, right-hand Conforms to DIN 13 tolerance 6g Supplied with calibration certificate Fast, fail‑safe control to reduce rework and scrap A dedicated no‑go ring gauge simplifies pass/fail decisions on external threads: the tool is intended to not engage a correctly manufactured thread; if engagement occurs, the part is classified as out of tolerance. This binary check accelerates quality control and shortens inspection cycles, which translates into fewer stoppages on the shop floor and reduced downstream rework. The clear mechanical verdict given by the gauge supports efficient statistical process control without complex measurement setups. Durable construction for long service life and consistent results Manufactured from hardened gauge steel, the gauge resists wear and preserves its form over repeated use, maintaining dimensional stability in demanding production environments. The DIN‑compliant tolerance band (DIN 13, 6g) ensures that the tool matches the established thread standards used across industry. Robust materials and careful finishing reduce maintenance frequency, so inspection routines remain predictable and tooling costs are minimised over the lifetime of the gauge. Documented calibration for traceability and quality systems The gauge is supplied with a calibration certificate, enabling traceability and inclusion in quality documentation. This feature supports audit requirements and helps integrate the gauge into existing inspection plans. As a simple, mechanical control instrument, the gauge complements digitised inspection strategies by providing a rapid, standardised check that confirms whether components meet the required thread form and tolerance class. Contact Metav Werkzeuge for order placement and expert advice on gauge selection from our Emmerich warehouse team Technical data Article number: M315.880.7 GTIN: 4054469153933 Weight: 2 kg Material: Gauge steel, hardened Standard: DIN 13, 6g Thread size: M80×2 right‑hand Tariff number: 90173000 EClass: 21170214 Facts Thread: M80×2 Weight: 2 kg Tariff number: 90173000 GTIN: 4054469153933 Special features No‑go (reject) ring gauge Supplied with calibration certificate Hardened gauge steel construction For metric ISO fine threads, right‑hand FAQ What is the primary purpose of this no‑go ring gauge? The AUSSCHUSS M80×2 no‑go ring gauge is used to check external threads quickly and decisively; engagement indicates a thread outside the acceptable tolerance and the part is rejected. Which thread standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 with a 6g tolerance class, ensuring compatibility with metric ISO fine‑thread specifications. Is the gauge ready for use with traceable calibration? Yes, the ring gauge is supplied with a calibration certificate, enabling traceability and documentation for quality systems. Can this ring gauge be used for left‑hand threads? This specific item is a right‑hand M80×2 ring gauge; left‑hand applications require the corresponding left‑hand gauge variant. What is the article number for ordering and reference? Order and reference using article number M315.880.7 from the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com