Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M72x4 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Benefit from DIN 13, 6H conformity, hardened gauge steel and an included calibration certificate for reliable thread inspection; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge M72 x 4.0 — metric ISO fine thread, right-hand A thread plug gauge designed to check metric ISO fine threads (M72 x 4.0) with DIN 13, 6H tolerances for workshop and production quality control. Includes calibration certificate Hardened gauge steel construction DIN 13, 6H tolerance for metric threads Right-hand thread inspection tool Accurate inspection to cut rework and scrap This plug gauge delivers repeatable go/no-go verification for metric ISO fine threads, helping to reduce rework and avoid assembly problems. The tool is specified for M72 x 4.0 threads under DIN 13, 6H, which ensures compatibility with standardised internal thread tolerances. By using a dedicated inspection gauge instead of manual gauging methods, process throughput is improved and non-conforming batches are detected early in production. The included calibration certificate confirms traceable inspection readiness on delivery. Robust material and geometry for repeatable results Manufactured from hardened gauge steel, the gauge resists wear from frequent use and preserves its measuring edges, which maintains conformity across batches. The right‑hand configuration matches common thread orientations and supports consistent seating during inspection. The compact, solid construction provides tactile feedback during a check, so an inspector can quickly distinguish between acceptable and unacceptable threads. This robustness translates into fewer interruptions on the shop floor and lower costs from rejected assemblies. Traceability and integration into quality systems Delivered with an official calibration certificate, the gauge is immediately suitable for documented inspection routines and internal quality records. The certificate documents the calibration status at handover, enabling straightforward inclusion in quality management systems and audit trails. As a standard inspection instrument, it complements visual checks and more advanced metrology tools, providing a fast, standards-based method to confirm thread conformity before assembly or further processing. Contact Metav Werkzeuge for tailored advice on integrating the M72 x 4.0 thread plug gauge into production control or to request a quotation; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M315.672.9 GTIN: 4054469155029 Material: hardened gauge steel Norm: DIN 13, 6H Size: M72 x 4.0 Weight: 2 kg Facts Thread pitch: 4.0 mm Right-hand thread Category: Gauges / Thread inspection Tariff number: 90173000 Special features Calibration certificate included Metric ISO fine thread verification Designed for go/no-go inspection Brand: Metav IndustryLine FAQ What applications is this gauge intended for? The M72 x 4.0 thread plug gauge from Metav IndustryLine is intended for production and incoming inspection of metric ISO fine internal threads where DIN 13, 6H tolerances apply. Does the gauge come calibrated? Yes, the gauge is supplied with a calibration certificate, so the tool is ready for documented inspection routines upon delivery. Is this gauge suitable for left‑hand threads? No, this specific item is configured for right‑hand threads; left‑hand thread checks require the corresponding left‑hand gauge. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability, ensuring reliable go/no-go checks over extended use. Can this gauge be used for final assembly verification? The gauge is suitable for final inspection of internal thread form and tolerance acceptance according to DIN 13, 6H and is commonly used to confirm parts before assembly. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x4 Thread Plug Gauge For ISO Metric Fine Thread Right-Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of proven thread verification with a hardened gauge that combines conformity to DIN standards, robust material and a delivered calibration certificate for traceable quality control; order or request advice from Metav Werkzeuge for reliable supply and expert support. Thread plug gauge GUT M72 x 4.0 — Go gauge for metric ISO fine threads, right-hand, DIN 13 6H (Metav IndustryLine) The Thread plug gauge GUT M72 x 4.0 is a dedicated gauge for fast, repeatable verification of right-hand metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Delivered with calibration certificate Designed for repeatable go verification Quick conformity checks that reduce rework and downtime The gauge enables immediate Go/No‑Go decisions on M72 x 4.0 threads, supporting faster throughput on production lines and at goods‑in inspection. By confirming the functional fit to DIN 13, 6H, the tool removes ambiguity from thread acceptance and lowers scrap rates. Its straightforward go‑type design focuses on one clear result — a pass or fail — which speeds up routine checks and reduces decision time in busy workshop environments. Built for repeatability and mechanical resilience Manufactured from hardened gauge steel and finished by precision grinding, the gauge maintains dimensional stability under regular shop use. The robust construction resists wear and preserves the essential measuring profile, ensuring consistent performance over many cycles. Reduced measurement variability and dependable mechanical properties mean less frequent replacement, supporting continuous production and a predictable maintenance schedule. Traceable calibration for quality assurance and documentation Supplied with a calibration certificate, the gauge supports traceability and audit requirements in quality systems. The documentation simplifies record keeping for internal control plans and external audits, demonstrating that the inspection equipment was verified prior to use. For operations that require documented verification of thread acceptance, this calibrated go plug is a practical instrument to integrate into quality procedures. For advice on integrating Metav IndustryLine thread gauges into existing inspection routines or to secure supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich by phone or e‑mail for a personalised recommendation and prompt delivery options Technical data Article number: M315.572.9 GTIN: 4054469154848 Tariff number: 90173000 Facts Thread size: M72 x 4.0 Weight: 2 kg Right‑hand thread Special features Material: gauge steel, hardened Standard: DIN 13, tolerance class 6H Delivered with calibration certificate Category: thread plug gauge / go gauge FAQ What is the intended use of this gauge? The gauge is intended for go‑type verification of right‑hand metric ISO fine threads; the Thread plug gauge GUT M72 x 4.0 confirms whether a threaded part meets the functional acceptance for M72 x 4.0, DIN 13, 6H. Does the gauge come with calibration documentation? Yes, the tool is supplied with a calibration certificate; the calibration document accompanies the Thread plug gauge GUT M72 x 4.0 for traceability and audit purposes. Which standard and tolerance class does this plug gauge follow? This plug gauge is made to conform to DIN 13 with tolerance class 6H, suitable for standard metric ISO fine thread acceptance. What material is the gauge made from and how does that affect durability? The gauge is manufactured from hardened gauge steel, which provides wear resistance and dimensional stability, extending service life under regular inspection cycles. Can this gauge be used for left‑hand threads? No, this specific item is a right‑hand go plug gauge for M72 x 4.0 threads and is not suitable for left‑hand thread verification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x4 Thread Ring Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take control of thread quality with a robust inspection tool: the combination of precise DIN‑class tolerance, hardened gauge steel construction, and an included calibration certificate ensures repeatable rejection of out‑of‑tolerance threads and reduces rework. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Ring Gauge M72 x 4.0 No‑Go (right‑hand) — Metav IndustryLine The Thread Ring Gauge M72 x 4.0 No‑Go is a right‑hand thread inspection gauge designed for production and incoming‑inspection tasks, checking conformity to ISO/DIN metric fine thread tolerances. Right‑hand M72 x 4.0 thread No‑Go gauge for reliable reject control Hardened gauge steel for long service life Supplied with calibration certificate Consistent tolerance control for production reliability A dedicated No‑Go ring gauge provides a direct, binary check that a threaded part exceeds allowable limits. By referencing DIN 13 (6g) and the nominal M72 x 4.0 geometry, this gauge gives an immediate go/no‑go decision at the inspection point. The result is faster quality gates, fewer ambiguous measurements and a lower risk of costly rework. The clear mechanical pass/fail principle is ideal where throughput and certainty are priorities in workshop and production environments. Robust construction that reduces lifecycle costs Manufactured from hardened gauge steel, the ring offers high wear resistance and dimensional stability under repeated use. The material choice and heat treatment minimise profile wear, which preserves gauge accuracy and extends intervals between re‑calibration. The compact, single‑function design simplifies handling while maintaining the stiffness required for accurate assessment of large diameter metric fine threads in serial production. Calibration and traceability for audit readiness Delivered with a calibration certificate, this inspection ring supports traceability and quality documentation. The certificate records the inspection status at delivery, enabling integration into quality systems and audit evidence for suppliers and manufacturers. Combined with the DIN tolerance reference, traceable calibration ensures reproducible decisions across shifts and operators, strengthening process reliability and customer confidence. For assured thread inspection and traceable measurement, choose Metav IndustryLine thread gauges — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: M315.872.9 GTIN: 4054469155388 Thread: M72 x 4.0 Direction: right‑hand Material: gauge steel, hardened Standard: DIN 13, 6g Weight: 2 kg Customs tariff number: 90173000 Facts Nominal diameter: 72 mm Pitch: 4.0 mm Tolerance class: 6g Mass: 2 kg Special features No‑Go (Ausschuss) function for reject control Supplied with calibration certificate Hardened construction for wear resistance Designed for metric ISO fine threads FAQ What does the No‑Go designation mean for inspection? The No‑Go designation indicates the ring functions as a reject gauge: a thread that enters the ring is out of tolerance. The M72 x 4.0 No‑Go ring gauge (SKU M315.872.9) gives an immediate fail indication for non‑conforming threads. Is a calibration certificate included with delivery? Yes, the ring gauge is supplied with a calibration certificate that documents the inspection status at delivery and supports traceability in quality records. Which standard and tolerance class does the gauge reference? The gauge is manufactured to check metric fine threads against DIN 13 with tolerance class 6g for the M72 x 4.0 nominal size. What is the ring made from and how durable is it? The ring is made from hardened gauge steel, chosen for high wear resistance and dimensional stability under repeated use in production environments. Can this gauge be used for left‑hand threads? No, this specific ring is a right‑hand thread gauge and is intended for right‑hand metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x6 Thread Go Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Benefit from a hardened gauge steel construction, DIN 13 tolerance class and an included calibration certificate for reliable thread inspection. Combine long service life and traceable calibration to secure production quality — order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M72 x 6.0 — right‑hand metric ISO fine thread, Go gauge (Metav IndustryLine) The Thread ring gauge M72 x 6.0 is a right‑hand metric ISO fine‑thread inspection gauge designed for production testing and incoming inspection of large threaded components in mechanical engineering and fabrication. Calibrated with certificate included Hardened gauge steel construction Conforms to DIN 13 tolerance class 6g For right‑hand metric fine threads M72 x 6.0 Consistent verification for production control The gauge delivers reproducible go/no‑go checks that simplify process control on the shop floor. Made from hardened gauge steel, the tool resists wear during repeated engagement with threaded parts, which preserves the fit criteria over time and reduces the need for frequent replacement. Conformity with DIN 13 and the 6g tolerance class ensures compatibility with standard metric ISO fine threads, enabling consistent acceptance criteria across suppliers and production batches. The robust construction supports frequent use in quality assurance routines and minimises measurement uncertainty in everyday inspection tasks. Built for longevity and practical handling A compact, purpose‑built design keeps handling straightforward while providing enough mass to stabilise engagement with large threads; the item weight is approximately 2 kg, which helps avoid accidental misalignment during checks. The solid, hardened body reduces sensitivity to surface damage and knock‑on wear, so maintenance intervals are extended and downtime for replacements is minimised. Where traceable, durable gauges are required to protect production throughput, this model gives a balance of mechanical resilience and ergonomic handling for workshop or inspection bench use. Traceability and audit readiness with calibration certificate Delivered with a calibration certificate, the gauge supports documented traceability for quality systems and internal audits. The certificate documents the acceptance status at the time of delivery and simplifies entry into an inspection equipment register. For customers who maintain ISO management systems, the supplied paperwork reduces the administrative burden during supplier and internal audits by showing that the inspection tool was issued with verified conformity. This approach supports continuous quality assurance without additional calibration steps immediately after purchase. Practical application and integration into inspection workflows Intended for verifying right‑hand metric ISO fine threads, the gauge checks the functional fit of internal or external threads sized M72 x 6.0 under the 6g tolerance class. Use as a go gauge to confirm that a thread falls within allowable limits for assembly or further processing; it is particularly suited to workshop inspection stations, incoming goods control and final acceptance of threaded components. Marked and machined to standard form, the gauge integrates with established quality procedures and works alongside other metrology equipment for a complete inspection routine. For calibrated inspection instruments from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.772.A GTIN: 4054469155777 Thread size: M72 x 6.0 Type: Right‑hand metric ISO fine thread, tolerance 6g Material: Gauge steel, hardened Weight: 2 kg Tariff code: 90173000 Facts ECLASS: 21170214 Norm: DIN 13 Tolerance class: 6g Packaging: Supplied with calibration certificate Special features Calibrated — calibration certificate supplied Go gauge function for go/no‑go testing Hardened gauge steel for high wear resistance Designed for metric ISO fine threads (right‑hand) FAQ What thread size does this gauge check? The gauge is sized for M72 x 6.0 metric ISO fine threads and is intended for right‑hand thread verification. Is a calibration certificate included with the gauge? Yes, the unit is supplied with a calibration certificate documenting its condition at delivery. Which tolerance class does the gauge conform to? The ring is manufactured to DIN 13 and the 6g tolerance class for metric fine threads. What material is the gauge made from? The gauge is made from hardened gauge steel, selected for wear resistance and dimensional stability. Can the gauge be used for production‑line checks? The gauge is suitable for routine production and incoming inspection where a Go gauge is used to confirm thread acceptability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x6 Thread Go/No-Go Plug, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, adherence to DIN 13, 6H tolerance and the included calibration certificate for reproducible rejection testing in your inspection process. Order the thread plug gauge directly via Metav Werkzeuge or consult our specialists if additional advice is required. Thread plug gauge (No‑Go) M72 x 6.0 — right‑hand, hardened gauge steel (Metav IndustryLine) The Thread plug gauge (No‑Go) M72 x 6.0 provides a fast and reliable check for right‑hand metric ISO fine threads during production and incoming inspection. No‑Go plug gauge for M72 x 6 threads Hardened gauge steel for long service life Supplied with calibration certificate Ensure rejected parts are caught before assembly A dedicated No‑Go plug gauge is the most direct method to prevent out‑of‑tolerance internal threads from progressing through the production chain. Designed to the DIN 13, 6H tolerance, this master gauge provides a clear pass/fail criterion: if the M72×6 No‑Go entry is obstructed, the thread is accepted; if it passes, the workpiece is rejected. That binary outcome shortens inspection time and removes ambiguity in quality control, reducing rework and assembly failures. Durable construction for repetitive shop‑floor use Manufactured from hardened gauge steel, the tool is intended for repeated engagement with machined parts without rapid wear. The robust material choice preserves the reference profile, so calibration intervals remain predictable and the gauge sustains stable performance under normal workshop conditions. A compact mass and solid design also ease handling during manual checks, supporting efficient, repeatable inspection routines. Traceable measurements and documented quality This gauge is supplied with a calibration certificate, ensuring traceability of the inspection result and supporting quality documentation. The certificate demonstrates that the gauge has been measured against defined standards, enabling its integration into accredited inspection plans and internal audits. Traceability reduces uncertainty in acceptance decisions and strengthens supplier‑customer quality chains. Practical application and workshop integration Intended for use where metric ISO fine threads are produced or inspected, the tool is right‑hand threaded and suited to checks on turned or tapped components, housings and fittings. Its straightforward go/no‑go concept integrates easily into visual work instructions and shop‑floor control plans, enabling technicians to perform checks with minimal training while preserving measurement reliability. Contact Metav Werkzeuge to reserve the M72 No‑Go thread plug gauge and secure a calibrated reference for immediate inclusion in production control. Technical data Article number: M315.672.A GTIN: 4054469155647 Category: Lehren / Gauges Facts Dimension: M72×6 Weight: 2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Norm: DIN 13, 6H Function: No‑Go (reject) plug gauge, right‑hand thread Supplied with calibration certificate Intended use: inspection of metric ISO fine threads FAQ How does this No‑Go plug gauge differ from a Go gauge? A No‑Go plug gauge checks that an internal thread is not too large; the tool specifically mounted as a No‑Go will fail any thread that exceeds the maximum material condition, ensuring out‑of‑tolerance parts are rejected during inspection. Is the calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate that documents the measured condition of the plug gauge for traceability in quality records. Can the gauge be used for left‑hand threads? This particular gauge is manufactured for right‑hand metric ISO fine threads; left‑hand checks require the corresponding left‑hand gauge. What standard does the gauge conform to? The plug gauge is produced to the DIN 13, 6H specification for metric ISO fine threads and intended to support consistent acceptance criteria in production. Is this gauge suitable for heavy shop‑floor use? The hardened gauge steel construction is chosen for durability in repeated inspections; nonetheless, adherence to proper storage and handling practices extends service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72x6 Thread Ring Gauge GO/NO-GO Metric ISO Fine Right-Hand With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Ensure consistent thread quality with the No‑Go thread ring gauge M72 x 6.0, combining hardened gauge steel and DIN 13 tolerance class 6g for reliable rejection checks; supplied with a calibration certificate for traceable inspection results. Order directly via Metav Werkzeuge or consult the Metav specialists for application advice. No‑Go thread ring gauge M72 x 6.0 – Hardened gauge steel, DIN 13 (6g) A No‑Go thread ring gauge M72 x 6.0 for right‑hand metric ISO fine threads, designed for rapid go/no‑go assessments in production and quality control environments. No‑go ring gauge for M72 x 6.0 metric fine thread Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6g Supplied with calibration certificate Fast, unequivocal rejection checks to protect production quality A dedicated no‑go ring gauge provides a single‑step check that prevents out‑of‑tolerance threaded components from progressing through assembly or shipment. By using a dedicated reject gauge for the fine M72 x 6.0 profile, operators obtain an immediate, objective result: if the gauge enters the internal thread, the part fails. This method reduces subjective interpretation, speeds up sampling in batch inspections and lowers the risk of costly rework downstream, supporting consistent throughput in machining and assembly processes. Durable construction and standardised tolerances for repeatable results Manufactured from hardened gauge steel and produced to DIN 13 with 6g tolerance, the ring offers high wear resistance and dimensional stability during repeated use. The choice of material and heat treatment ensures the gauge retains form and profile under normal workshop conditions, extending intervals between recalibrations. Compliance with the DIN reference gives purchasing and QA departments a recognised benchmark for interchangeability and traceability when comparing tools across suppliers and shifts. Calibrated delivery for immediate traceability and audit readiness Delivery includes a calibration certificate, enabling direct incorporation into quality management systems and supporting audit trails. The supplied document verifies the gauge’s dimensions at the time of calibration and allows laboratories to record measurement uncertainty and calibration dates. For process control, this traceability means inspection results obtained with the gauge can be referenced in quality reports and non‑conformance records without delay, enhancing supplier confidence and internal quality governance. Contact Metav Werkzeuge to confirm application suitability and request the calibrated Metav IndustryLine no‑go ring gauge M72 x 6.0 with full documentation Technical data Article number: M315.872.A GTIN: 4054469155906 Material: gauge steel, hardened Thread: M72 x 6.0 Standard: DIN 13, 6g Weight: 2 kg Customs tariff number: 90173000 Core specifications Thread diameter: 72 mm Thread pitch: 6.0 mm Tolerance class: 6g Hand: right‑hand Weight: 2 kg Special features No‑go ring gauge for rejection checks Material: hardened gauge steel Conforms to DIN 13, tolerance 6g Supplied with calibration certificate FAQ What is the intended use of this ring gauge? The No‑Go thread ring gauge M72 x 6.0 (SKU M315.872.A) is intended for go/no‑go inspection of right‑hand metric ISO fine threads to identify parts that exceed allowable limits. How does conformity to DIN 13 help in quality control? Conformance to DIN 13 with tolerance class 6g ensures the gauge matches an established industrial thread profile, allowing consistent acceptance criteria across production and inspection processes. Is the gauge supplied calibrated? Yes, the ring gauge is supplied with a calibration certificate that documents its measured condition at delivery and supports traceability in quality records. Can this gauge be used for left‑hand threads? No. This gauge is manufactured for right‑hand metric threads only; left‑hand thread checking requires a dedicated left‑hand gauge. What should be done if the no‑go gauge enters the thread? If the no‑go ring gauge engages the thread, the component fails inspection and should be segregated for rework or rejection according to the site's non‑conformance procedure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72×1.5 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and DIN‑13 conformity for reliable thread checks; the included calibration certificate ensures traceable results and straightforward integration into inspection routines. Order the gauge directly via Metav Werkzeuge or consult our specialists for application guidance. Thread Go Gauge GUT M72 x 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread Go Gauge GUT M72 x 1.5 is a hardened gauge‑steel plug for quick verification of metric ISO fine threads (right‑hand), designed for workshop and inspection use Hardened gauge steel construction Conforms to DIN 13 with 6H tolerance Includes calibration certificate For M72 x 1.5 metric fine thread, right‑hand Consistent, standards‑based thread verification for production A precision go gauge provides fast, objective assessment of thread quality during incoming inspection and on‑machine checks. Built to DIN 13 with a 6H tolerance, this plug confirms that internal threads meet the nominal limits; acceptance is simply the pass of the mandrel. The hardened gauge‑steel body gives dimensional stability and low wear, which supports repeatable checks over many cycles and reduces downstream rework. This characteristic makes the tool suitable for routine quality control in metalworking and assembly lines. Robust construction for repeatable results in busy workshops The mandrel is manufactured from hardened gauge steel, combining stiffness with abrasion resistance to maintain gauge form over prolonged use. The designation M72 x 1.5 identifies the nominal diameter and pitch, while the right‑hand configuration matches conventional metric fine threads. The substantial mass contributes to handling stability during inspection and helps maintain alignment when inserted into housings or components. These design choices translate into fewer false rejects and a lower need for frequent replacement. Traceable calibration and integration into quality systems Delivered with a calibration certificate, the gauge supports traceability and documentation requirements for quality management. The certificate documents the as‑supplied condition and can be filed alongside batch inspection records to demonstrate conformity during audits. As a go‑type plug, the instrument verifies acceptability against the specified limit; retained records from Metav IndustryLine instruments help manufacturers uphold consistent production standards and simplify process validation. Contact Metav Werkzeuge today to discuss Metav IndustryLine thread gauges and request the calibration documentation — Metav Werkzeuge can advise on integration into existing inspection plans and delivery from Emmerich is handled reliably via their quality filter Technical Data Article number: M315.572.6 GTIN: 4054469152134 Label: Gewinde‑Lehrdorn GUT M 72 X 1,5 für metrisches ISO‑Feingewinde, rechts Key figures Nominal size: M72 Pitch: 1.5 mm Weight: 2 kg Tariff number: 90173000 Special features Type: Go (plug) gauge Material: Hardened gauge steel Standard: DIN 13, tolerance 6H Includes: Calibration certificate Right‑hand thread FAQ What does the M72 x 1.5 designation mean? The designation describes the nominal thread diameter (M72) and the pitch (1.5 mm) for the thread plug gauge supplied as the Thread Go Gauge GUT M72 x 1.5. Is the gauge supplied with traceable documentation? Yes, the Metav IndustryLine Thread Go Gauge is delivered with a calibration certificate that documents the calibrated condition at supply. Which standard does the gauge comply with? The plug gauge is manufactured in accordance with DIN 13 and specified to the 6H tolerance class for metric ISO threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel; this provides wear resistance and dimensional stability, supporting repeatable thread verification. Can the gauge be used in production and final inspection? Yes. As a go‑type plug gauge, the item is intended for quick acceptance testing of internal threads during both in‑process checks and final inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M72×6 Thread Go Plug Gauge For ISO Fine Thread Right-Hand Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel body, DIN 13 6H tolerance and the included calibration certificate to secure consistent thread acceptance and reproducible inspection results. Order the Go plug gauge directly via Metav Werkzeuge or consult the Metav team for application advice and delivery details. Go plug gauge M72×6 — Right‑hand metric ISO fine‑thread inspection gauge (Metav IndustryLine) Go plug gauge M72×6 is a precision inspection tool for checking the acceptance of right‑hand metric ISO fine threads, designed for workshop and production quality control. Hardened gauge steel construction Delivered with calibration certificate DIN 13 tolerance class 6H Consistent pass/fail checking for production lines A dedicated Go plug gauge provides a fast, unequivocal pass/fail check during in‑process inspections and final acceptance. The robust hardened gauge steel body resists wear and preserves thread form, which keeps tolerance drift to a minimum even under frequent use. Built to DIN 13, 6H, the gauge is sized for M72×6 metric fine threads and supports reliable decision‑making on the shop floor, reducing rework and speeding throughput. Traceable calibration reduces measurement uncertainty The gauge is supplied with a calibration certificate, ensuring the measured limit is documented for traceability and quality records. This documentation supports internal audits and supplier control processes and demonstrates that the inspection tool has been checked before use. Traceable calibration helps maintain consistent acceptance criteria across shifts and machines, lowering the risk of ambiguous results and disputed inspections. Durable design for repeated workshop use Machined from hardened gauge steel and finished for accurate seating, the plug gauge is suitable for routine thread verification of medium and large components. The right‑hand thread form matches standard ISO fine‑thread practice, and the tool’s mass and geometry provide stable engagement without excessive operator effort. The compact, rugged construction gives long service life and predictable wear behaviour, which keeps quality control both efficient and cost‑effective. For specification advice or to procure the Metav IndustryLine Go plug gauge M72×6, contact Metav Werkzeuge in Emmerich for tailored support and supply via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M315.572.A GTIN: 4054469155517 ECLASS: 21170228 Key figures Thread size: M72×6 Weight: 2 kg Tariff number: 90173000 Special features Type: Go (GUT) plug gauge Material: hardened gauge steel Standard: DIN 13, 6H Right‑hand metric ISO fine thread Delivered with calibration certificate FAQ What is this gauge intended to check? The Go plug gauge M72×6 is intended for acceptance testing of right‑hand metric ISO fine threads in the M72×6 size and confirms whether internal threads meet the DIN 13, 6H acceptance limit. Is the gauge delivered calibrated? Yes, the plug gauge is supplied with a calibration certificate, which documents the inspection condition at delivery and supports traceability in quality records. What material and durability can be expected? Manufactured from hardened gauge steel, the gauge offers wear resistance and dimensional stability, making it suitable for frequent use in workshop inspection routines. Which SKU identifies this item? This product is listed under SKU M315.572.A and marketed as the Metav IndustryLine Go plug gauge M72×6. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x1.5 Go Thread Plug Gauge For Metric ISO Fine Thread, Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN 13 tolerance class to ensure fast, repeatable thread checks; the included calibration certificate guarantees traceability and reduces inspection uncertainty. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go Thread Plug Gauge M75×1.5 (right-hand) – DIN 13, 6H | Metav IndustryLine The Go Thread Plug Gauge M75×1.5 (right-hand) is a precision verification tool for production and inspection of metric ISO fine threads, designed to confirm thread fit and dimensional conformity on-site or in the quality lab Hardened gauge steel construction Calibrated – certificate included Conforms to DIN 13, tolerance class 6H Right-hand thread M75×1.5 metric fine Faster acceptance decisions with robust thread verification The Go plug gauge is engineered for reliable pass/fail testing on internal threads and shortens inspection time by providing an immediate mechanical indication of conformity. Made from hardened gauge steel, the tool resists wear during repeated use, which maintains the defined limit dimension and reduces the need for frequent replacement. Using a dedicated Go gauge for the M75×1.5 fine pitch ensures that parts that pass are guaranteed to assemble without interference, supporting consistent throughput in production. Certified measurement for traceability and quality control A calibration certificate accompanies the gauge, providing documented measurement traceability that supports audit requirements and internal quality systems. The supplied paperwork confirms the gauge’s conformity to the intended reference and allows integration into process control documentation. The gauge complies with DIN 13 and the 6H tolerance class, offering a familiar reference framework for inspection plans and reducing ambiguity when specifying acceptance criteria across suppliers. Practical handling and inspection benefits for workshops The plug design and compact form factor make the gauge straightforward to use at the bench or on the shop floor: align, insert and assess fit without measuring instruments. This mechanical simplicity translates into fewer operator steps and a lower likelihood of procedural errors compared with purely instrumental checks. The robust construction and clear pass criterion reduce non-productive time, meaning fewer scrapped parts and improved confidence in assembly processes when working with metric ISO fine threads. For reliable thread inspection and traceable results, contact Metav Werkzeuge to obtain the Metav IndustryLine Go Thread Plug Gauge M75×1.5 and expert guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.575.6 GTIN: 4054469152141 Label: Go Thread Plug Gauge M75 x 1,5, right-hand Facts Thread size: M75×1.5 Tolerance class: 6H Standard: DIN 13 Weight: 2 kg Tariff number: 90173000 Eclass: 21170228 Special features Material: hardened gauge steel Type: Go (plug) gauge for internal threads Calibrated: calibration certificate included Application: verification of metric ISO fine threads FAQ What does a Go plug gauge check? A Go plug gauge verifies that an internal thread meets the minimum material and dimensional requirements so a mating external thread will assemble without interference; the Metav IndustryLine Go Thread Plug Gauge M75×1.5 is intended for this exact function. Is a calibration certificate included with the gauge? Yes, the tool is supplied with a calibration certificate confirming traceability and the inspection status of the gauge. Which standard and tolerance class apply to this gauge? The gauge is manufactured to DIN 13 and specified for tolerance class 6H, which is standard for metric ISO thread acceptance checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x1.5 Ring Gauge, Metric ISO Fine Pitch, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Combine DIN 13, 6g conformity with hardened gauge steel and a supplied calibration certificate for dependable, rapid go/no‑go inspection of metric fine threads. Order the gauge directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Go thread ring gauge M75 x 1.5 — Go ring gauge, DIN 13 6g, hardened gauge steel (Metav IndustryLine) Go thread ring gauge M75 x 1.5 provides a compact, robust solution for right‑hand metric ISO fine threads in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Right‑hand metric fine thread M75 x 1.5 Fast, repeatable pass/fail inspection on the shop floor A go gauge is designed for immediate go/no‑go verification; this ring variant enables quick identification of acceptable thread forms without complex measurement routines. The M75 x 1.5 sizing and 6g tolerance class align with metric ISO fine thread practice, which simplifies acceptance criteria in inspection plans and reduces cycle time during serial checks. Using a dedicated ring gauge for pass/fail tasks lowers handling time compared with dimensional measurement, improving throughput while maintaining clear, objective inspection decisions. Durable construction that endures regular use Made from hardened gauge steel, the instrument resists wear and maintains its functional limits over prolonged use, offering predictable performance in workshop conditions. The robust material and straightforward geometry ensure the gauge withstands repeated engagement with mating parts, keeping maintenance needs low and replacement cycles predictable. For production environments where repeatability and tool life matter, this design provides a practical balance between resilience and handling convenience. Compliant design for standardised quality control Conformity to DIN 13 and the 6g tolerance class provides a recognised reference that integrates with established inspection routines and quality documentation. The right‑hand configuration matches common thread orientations, ensuring compatibility with standard components and fasteners. As a dedicated inspection tool, the gauge supports traceable quality workflows by offering a consistent, normative basis for go/no‑go decisions, which in turn aids conformity checks during incoming inspection or final assembly control. Traceable calibration and supplier assurance The gauge is supplied with a calibration certificate, ensuring traceability of the inspection limit to the delivery document; this facilitates inclusion in quality management systems and supports audit requirements. Supplied by a brand within the Metav offering, the tool benefits from a supplier network focused on reliable logistics and technical support, making it straightforward to integrate into existing metrology procedures. For applications that demand documented proof of conformity, the included certificate simplifies record keeping and acceptance by quality auditors. For assurance in threaded part inspection, choose the Metav IndustryLine Go thread ring gauge M75 x 1.5 and contact Metav Werkzeuge for tailored advice and local supply from Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical details Article number: M315.775.6 GTIN: 4054469152622 Label: Go thread ring gauge M75 x 1.5, metric ISO fine thread, right‑hand SKU: M315.775.6 Data Thread size: M75 x 1.5 Tolerance class: 6g Weight: 2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Handedness: right‑hand thread Calibration certificate included Standard: DIN 13 Category: Gauges / Thread ring gauge FAQ What inspection tasks is this ring gauge intended for? The ring gauge is intended for fast go/no‑go checks of right‑hand M75 x 1.5 metric fine threads; it is ideal for routine acceptance testing in production and incoming inspection. Does the gauge come with traceable documentation? Yes, the gauge is delivered with a calibration certificate that documents the inspection limits and supports quality system traceability. Which standard does the gauge comply with? This inspection tool conforms to DIN 13 with a 6g tolerance class, matching common metric ISO fine‑thread specifications. What material is the gauge made from and how does that affect longevity? Manufactured from hardened gauge steel, the ring gauge offers wear resistance and stable boundaries for go/no‑go checks, prolonging service life under regular use. Is this gauge suitable for left‑hand threads? This specific item is a right‑hand thread ring gauge; left‑hand variants must be selected separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x1.5 Thread Plug Gauge Go/No-Go Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Ensure reliable rejection control for metric ISO fine threads by using the hardened NO‑GO plug gauge together with its calibration certificate; ideal for consistent quality gates and reduced rework. Order or request application advice directly via Metav Werkzeuge to integrate this gauge into existing inspection routines. Thread plug gauge (NO‑GO) M75×1.5 — Metric ISO fine thread plug gauge, hardened gauge steel (Metav IndustryLine) A Thread plug gauge (NO‑GO) M75×1.5 designed for rapid go/no‑go verification of metric ISO fine internal threads in production and inspection environments Hardened gauge steel construction For metric ISO fine thread M75×1.5 Right‑hand NO‑GO thread plug Supplied with calibration certificate Reduce scrap with a clear rejection criterion A hardened NO‑GO plug provides an unequivocal check at the inspection point: if the gauge enters fully, the thread exceeds allowable limits and the part is rejected. This simple mechanical control cuts decision time at the bench and limits subjective judgement during visual inspection. By applying a defined NO‑GO limit the production process benefits from faster in‑line decisions, fewer downstream faults and a measurable reduction in rework and scrap. Traceable accuracy and standard compliance Manufactured to the metric thread standard DIN 13, 6H, the gauge offers a defined reference for internal fine threads. It is supplied with a calibration certificate that documents the inspection condition at delivery, supporting traceability in quality records. The accompanying certificate enables integration into quality systems and provides evidence for audits without additional initial verification steps, helping to secure compliance and shorten qualification time. Durable construction for repetitive inspection Made from hardened gauge steel, the plug is engineered for repeated use in busy inspection routines. The robust finish preserves the functional limits over many cycles, so gauge wear remains predictable and maintenance intervals are extended. Consistent mechanical behaviour ensures accuracy and repeatability of rejection checks, which is particularly valuable where single‑feature control must be executed swiftly across multiple batches. Practical fit for production and metrology workflows The right‑hand thread geometry and the clear NO‑GO function make the gauge straightforward to integrate into existing inspection jigs and go/no‑go stations. As a compact mechanical standard it supports fast cycle times and is compatible with manual or semi‑automated checks. For facilities seeking reliable pass/fail gates, this type of plug gauge is an efficient complement to dimensional measurement equipment and helps protect downstream assembly and functional testing operations. Contact Metav Werkzeuge to confirm application fit and arrange supply of the calibrated NO‑GO plug gauge for dependable thread control (Metav IndustryLine, SKU M315.675.6) Technical data SKU: M315.675.6 GTIN: 4054469152387 Material: Gauge steel, hardened Norm: DIN 13, 6H Thread size: M75×1.5 Weight: 2 kg Tariff number: 90173000 Core data Thread form: Metric ISO fine thread Hand: Right‑hand Function: NO‑GO (rejection) plug Delivery: With calibration certificate Special features Hardened design for wear resistance Intended for production inspection and QA gates Simple mechanical go/no‑go verification Suitable as a reference in audit documentation FAQ What does the NO‑GO designation mean for this plug gauge? The NO‑GO plug gauge indicates the rejection limit; the Thread plug gauge (NO‑GO) M75×1.5 (Metav IndustryLine, SKU M315.675.6) should not fully enter an acceptable internal thread — full entry signals an out‑of‑tolerance condition. Is a calibration certificate included with delivery? Yes, the gauge is supplied with a calibration certificate that documents the inspection status at delivery and supports traceability in quality records. Which thread standard does the gauge conform to? The plug is manufactured to DIN 13, 6H, providing a defined tolerance basis for metric ISO fine threads. Can this gauge be used in an automated inspection station? The mechanical NO‑GO function and right‑hand geometry make the gauge suitable for manual and many semi‑automated checks; adaptation for a specific automation cell should be assessed with the inspection engineer. How does the hardened material benefit routine inspection? Hardened gauge steel increases wear resistance and keeps the rejection limit stable over many cycles, improving accuracy and reducing the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x1.5 Thread Ring Gauge Metric ISO Fine Right-Hand, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of precise reject checking with a robust no‑go thread ring gauge in hardened gauge steel and tolerance class 6g for consistent quality control; order directly via Metav Werkzeuge or consult the technical team for application advice. Thread ring gauge REJECT M75 x 1.5 — Metav IndustryLine, right‑hand, tolerance class 6g Thread ring gauge REJECT M75 x 1.5 serves as a dedicated inspection gauge for verifying metric ISO fine threads in production and incoming‑goods inspection. No‑go thread ring for reject verification Hardened gauge steel for long life Tolerance class 6g per DIN 13 Calibration certificate included Ensure production does not pass faulty threads The thread ring gauge is designed as a practical control tool for rapid acceptance testing: the no‑go function detects parts that exceed permitted external thread dimensions and prevents non‑conforming items from continuing down the line. Built for repetitive use, the gauge helps keep process stability high and rejects measurable at the first inspection point. With the nominal size M75 x 1.5 and the 6g tolerance class stated in DIN 13, the device gives a clear, standardised pass/fail decision that is simple to document and integrate into quality plans. Durable construction for stable inspection performance Manufactured from hardened gauge steel, the ring resists wear and preserves its measuring edge through repeated engagement, ensuring durability and repeatable results in busy shop environments. The right‑hand design and solid construction minimise deformation during handling, making the gauge suitable for routine checks on turned and threaded components. Physical robustness reduces recalibration frequency and supports lean inspection routines where cycle time and reliability matter. Traceability and calibration for audit readiness A calibration certificate is supplied with the gauge, providing documented evidence of conformity and enabling straightforward traceability in quality records. This certificate supports internal audits and supplier audits, and helps maintain compliance with customer specifications. The supplied calibration allows rapid integration into inspection procedures; measurement outcomes can be referenced back to the calibration status for accountability and continuous improvement. Practical benefits for workshop and production use Using a purpose‑built reject ring simplifies operator training and improves throughput: the tactile go/no‑go decision is intuitive, there is no need for complex measuring instruments for quick checks, and the result is immediate. The combination of DIN 13 compliance and hardened construction means fewer false positives from worn gauges and greater confidence when accepting batches. For organisations aiming to reduce rework and scrap, this type of gauge is a cost‑effective safeguard in the quality chain. For robust thread control and documented traceability, choose the Metav IndustryLine no‑go ring and contact Metav Werkzeuge in Emmerich for procurement and technical guidance Technical Data Article number: M315.875.6 SKU: M315.875.6 GTIN: 4054469152868 Size: M75 x 1.5 Material: Lehrenstahl, hardened Norm: DIN 13, 6g Weight: 2 kg Customs tariff number: 90173000 Special note: No‑go (reject) gauge Calibration: Calibration certificate included Facts Tolerance class: 6g Thread standard: Metric ISO fine thread Hand direction: Right‑hand Mass: 2 kg Special features No‑go function for reject verification Hardened gauge steel for wear resistance Supplied with calibration certificate Category: Thread ring gauge Brand: Metav IndustryLine FAQ What is the purpose of this thread ring gauge? The thread ring gauge is a no‑go inspection tool used to identify external threads that exceed permitted dimensions; the Metav IndustryLine REJECT M75 x 1.5 (SKU M315.875.6) provides a definitive pass/fail check for metric ISO fine threads. Which tolerance class and standard does the gauge comply with? This gauge is manufactured to tolerance class 6g and complies with DIN 13, making it suitable for standardised checks against metric ISO fine threads. Is a calibration document supplied with the gauge? Yes, a calibration certificate is supplied with the gauge to ensure traceability and to support quality documentation in audits. Can this gauge be used for left‑hand threads? No, the delivered unit is a right‑hand thread ring gauge; left‑hand versions must be ordered separately if required. How does a no‑go ring help reduce production costs? By providing an immediate reject signal for out‑of‑tolerance threads, the no‑go ring prevents faulty parts entering assembly, reducing rework, scrap and downstream failures while supporting consistent quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of calibrated verification, hardened gauge steel construction and strict conformity to DIN 13, 6H for reliable pass/fail inspections in production. Order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Go thread plug gauge M75 x 2.0 — right-hand, DIN 13 6H (Metav IndustryLine) The Go thread plug gauge M75 x 2.0 serves as a robust checking gauge for right-hand metric ISO fine threads in inspection and assembly environments, designed for rapid pass/fail control of production parts. Calibrated with certificate included Hardened gauge steel construction For M75 x 2.0 metric fine thread Right-hand thread to DIN 13, 6H Ensure thread conformity with a single quick check A calibrated Go gauge provides an immediate, objective decision: the thread either accepts the gauge or it does not. For an M75 x 2.0 fine thread specified to DIN 13, 6H, this gauge removes ambiguity from routine inspections by delivering a simple pass/fail result. The direct outcome reduces time spent on downstream checks, lowers scrap rates and supports consistent assembly quality—especially where repeated verifications are required on production lines or incoming inspection. Built for durability and documented traceability Made from hardened gauge steel, the gauge is designed to withstand repeated use in workshop conditions without significant wear. The included calibration certificate documents the measurement status at delivery and supports traceability in quality records. As a calibrated measuring tool supplied ready for use, it simplifies audit preparation and internal quality control; maintenance cycles focus on storage and periodic re‑calibration rather than immediate adjustment, conserving inspection resources. Practical integration into shop‑floor workflows Compact and robust, the gauge fits into conventional inspection routines and fixtures for fast handling during assembly or incoming goods checks. Its solid construction and clear Go specification ease operator training and reduce interpretation errors in busy environments. Supplied as a right‑hand metric plug for fine threads, the gauge is particularly suitable where repeatable, TÜV‑compliant checks are required; its use supports smoother production flow and greater confidence in threaded joint integrity. For procurement from our Emmerich warehouse and technical advice on integrating the Metav IndustryLine Go thread plug gauge M75 x 2.0 (SKU M315.575.7) into existing inspection plans, contact Metav Werkzeuge for personalised support and available stock information Technical Data Article number: M315.575.7 GTIN: 4054469153100 Commodity code: 90173000 Core specifications Thread size: M75 x 2.0 Tolerance/standard: DIN 13, 6H Direction: right-hand Weight: 2 kg Special features Material: hardened gauge steel Calibration certificate included Go gauge (pass side) Intended for metric ISO fine threads FAQ What does "Go" mean for this thread plug gauge? "Go" indicates the pass side of a plug gauge; the Go thread plug gauge M75 x 2.0 verifies that the internal thread meets the minimum material and dimensional limits specified by DIN 13, 6H. Is a calibration certificate supplied with the gauge? Yes, the gauge is shipped with a calibration certificate, confirming the measurement status at delivery and enabling traceability in quality documentation. Can this gauge be used for left‑hand threads? No, this particular plug is manufactured for right‑hand metric ISO fine threads and must not be used for left‑hand thread checks. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to maintain reliable inspection results over many cycles. How should the gauge be stored between uses? Store the gauge clean, dry and protected from mechanical damage; avoid humid environments and keep the calibration certificate with the tool records to preserve traceability and ensure timely re‑calibration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x2 Thread Go Ring Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Conflicting product data detected: contradictory values in the supplied fields prevent the creation of a reliable product description. This issue arises when the provided information contains inconsistencies, such as mismatched attributes, contradictory specifications, or overlapping details that cannot be reconciled. As a result, it becomes impossible to generate an accurate and trustworthy description for the product. To resolve this, please carefully review the submitted data, identify any discrepancies, and make the necessary corrections to ensure all fields align properly. Once the data has been corrected and verified, you may retry the process to create a reliable product description.
M75x2 Thread Go/No-Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combining a hardened gauge steel construction with strict DIN 13, 6H compliance and a supplied calibration certificate, this gauge ensures reliable rejection control for metric fine threads; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (no-go) M75 x 2.0 — right-hand, DIN 13, 6H — Metav IndustryLine The thread plug gauge (no-go) M75 x 2.0 is a dedicated inspection tool for checking conformity of right-hand metric ISO fine threads in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, 6H For M75 x 2.0 metric fine thread Right-hand thread checking Supplied with calibration certificate Secure rejection control through standard conformity The primary purpose of this plug gauge is to provide an unambiguous go/no-go assessment of thread quality. Built to the DIN 13, 6H specification, the no-go member prevents acceptance of undersized or damaged threads, reducing the risk of assembly failures and return costs. As a direct inspection device, the plug offers fast decision-making during incoming inspection or final checks, contributing to shorter cycle times and more consistent throughput. Robust construction for long service life Manufactured from hardened gauge steel, the gauge resists wear under repetitive use, which preserves the acceptance limits over time and lowers lifetime costs. The solid build and balanced mass support repeatable measurements and stable handling, so inspection routines remain efficient even in busy workshop conditions. Durable surface properties ensure that the critical thread form stays true for a high number of engagement cycles. Traceable calibration for quality documentation This plug gauge is supplied with a calibration certificate, providing traceability for production records and supporting internal quality systems. The certificate documents the inspection status at delivery, simplifying acceptance into controlled inventories and easing audit preparation. For regulated manufacturing, documented calibration reduces administrative friction and demonstrates a commitment to measurable, defensible inspection practices. Practical use and handling in the workshop Designed for right-hand metric fine threads, the gauge specified as M75 x 2.0 engages the internal thread to check whether the part exceeds allowable limits; a correct fit of the go member and a rejection by the no-go member indicate conformity. The tool is compact to handle yet substantial enough to avoid deformation during use, making it suitable for production lines, incoming goods inspection and maintenance of critical assemblies where thread integrity is essential. For precision-critical inspection and ordering, contact Metav Werkzeuge in Emmerich for supply details or technical consultation on this Metav IndustryLine plug gauge Technical Data Article number: M315.675.7 GTIN: 4054469153483 SKU: M315.675.7 Weight: 2 kg Core specifications Thread: M75 x 2.0 Direction: right-hand Norm: DIN 13, 6H Tariff number: 90173000 Features Material: hardened gauge steel Type: no-go thread plug gauge Supplied with calibration certificate Application: metric ISO fine thread inspection Category: Gauges / Plug gauges FAQ What does "no-go" mean for this plug gauge? The no-go member is designed to reject threads that exceed the tolerance; the thread plug gauge (no-go) M75 x 2.0 (Metav IndustryLine, SKU M315.675.7) prevents acceptance of oversized or damaged internal threads. Is the gauge traceable for audits and quality records? Yes. This Metav IndustryLine plug gauge is supplied with a calibration certificate that documents its inspection status at delivery and supports traceability. Which standard does the gauge comply with? Compliance is to DIN 13, 6H, ensuring the thread form and tolerance class match common metric ISO fine-thread specifications for reliable interchangeability. What material is the gauge made from and how durable is it? The gauge is manufactured from hardened gauge steel, offering high wear resistance and repeatable measurements over extended inspection cycles. Can this gauge be used on left-hand threads? No. This tool is made for right-hand metric fine threads only; left-hand threads require the corresponding left-hand gauge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x2 Thread Ring Gauge Metric ISO Fine Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction, DIN‑compliant 6g tolerance and an included calibration certificate for consistent thread inspection; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go thread gauge ring M75 x 2.0 — metric ISO fine thread, right‑hand — Metav IndustryLine Go thread gauge ring M75 x 2.0 is a right‑hand metric ISO fine‑thread ring gauge designed for dimensional inspection and process control of M75 × 2.0 threads in production and incoming inspection. Hardened gauge steel for long service life DIN 13 tolerance class 6g compliance Supplied with calibration certificate included Reliable conformity for production control The Go thread gauge ring provides a straightforward and rapid pass/fail check that supports inline quality control. Manufactured from hardened gauge steel, the ring resists wear and preserves the inspection profile over repeated use, reducing measurement drift. Conformity to DIN 13 (6g) ensures that threads assessed with this ring meet the established metric ISO fine‑thread tolerances, making it suitable for both shop‑floor sampling and final acceptance testing. The clear go/no‑go function simplifies decision making and shortens inspection cycles without sacrificing traceability. Robust design that suits workshop environments Constructed as a compact ring gauge for M75 × 2.0 threads, this inspection tool combines a durable workhorse design with practical handling. The hardened material minimises profile deformation during repeated engagement, while the ring format offers rapid verification of thread form and pitch. As a Go gauge, it verifies whether an internal or external thread is within the maximum permissible material condition; when the gauge enters freely, the thread is acceptable for the intended tolerance class. This direct check reduces rework and supports a predictable production flow. Traceability and documentation for quality systems Delivered with a calibration certificate, the ring gauge arrives ready for integration into quality management procedures. The certificate documents the inspection status at delivery and enables immediate use in traceable measurement routines. For companies maintaining documented inspection records, this feature streamlines supplier audits and internal quality checks. The ring is identified by SKU M315.775.7 and GTIN 4054469153698, which supports stock management and ensures clear part‑identification across supply chains. For traceable, standards‑based thread inspection choose the Metav IndustryLine Go thread gauge ring and contact Metav Werkzeuge GmbH in Emmerich for procurement or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.775.7 GTIN: 4054469153698 Weight: 2 kg Thread size: M75 × 2.0 Material: gauge steel, hardened Standard: DIN 13, 6g Right‑hand thread Calibration certificate included Customs tariff number: 90173000 Facts Thread pitch: 2.0 mm Nominal diameter: 75 mm Special features Go gauge format Metric ISO fine thread verification Durable hardened construction Supplied calibrated for immediate use FAQ What does the Go designation mean for this ring gauge? The Go designation indicates the ring is intended to check whether an inspected thread meets the maximum material condition; the Go thread gauge ring M75 x 2.0 will enter acceptable threads freely, confirming conformity to the specified tolerance class. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate documenting the inspection status at delivery, enabling immediate use within documented quality procedures for the Metav IndustryLine ring gauge (SKU M315.775.7). Which standard does the gauge comply with? The ring gauge complies with DIN 13 and is manufactured to the 6g tolerance class for metric ISO fine threads, suitable for standard machine‑shop and production inspections. Can this ring gauge be used for both internal and external threads? The Go ring gauge is designed specifically to verify the corresponding mating thread form; it is used to check external threads where a ring enters the part being tested or to verify internal thread acceptability when paired appropriately. How does the hardened material benefit routine inspection? Hardened gauge steel reduces wear of the inspection profile over time, maintaining accuracy and repeatability of checks—this extends service life and reduces the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x3 Thread Go Gauge Metric Fine Pitch Right-Hand Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of reliable pass/fail inspection, hardened gauge steel construction and a supplied calibration certificate to maintain thread quality in production. Order the Go plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go plug gauge M75 x 3 – right-hand, DIN 13 (6H) by Metav IndustryLine A Go plug gauge M75 x 3 for quick verification of metric ISO fine threads in production and incoming inspection. Calibrated with certificate included Hardened gauge steel construction DIN 13 tolerance class 6H Right-hand thread check M75 x 3 Fast, unambiguous pass/fail inspection for metric fine threads A dedicated Go plug gauge provides an immediate, objective result when checking internal threads: either the gauge enters (Go) or it does not. For a M75 x 3 metric ISO fine thread manufactured to DIN 13, 6H, this tool shortens inspection cycles and reduces reliance on subjective judgement. The simple mechanical check supports reproducible decisions on acceptance, lowers the incidence of rework and helps sustain a smooth production flow by preventing non-conforming parts from proceeding down the line. Durable engineering for repeatable measurements Constructed from hardened gauge steel, the gauge resists wear and preserves the essential inspection geometry over many cycles. The robust material choice and heat treatment deliver stable performance under frequent use, which keeps maintenance needs low and measurement uncertainty minimal. The compact, precise form of the plug gauge ensures consistent engagement with the thread flanks, maintaining the Go condition as the primary reference for interchangeability and long-term process control. Traceability and quality-system compatibility Supplied with a calibration certificate, the gauge enters the workshop ready for documented inspection work and integration into quality management systems. Traceable calibration records support audit requirements and make the gauge suitable for incoming inspection, in-process checks and final quality assurance. The product’s clear specification and documented status facilitate compliant documentation and help demonstrate control of thread acceptance criteria during supplier or customer audits. Consult Metav Werkzeuge for application advice and secure the calibrated M75 Go plug gauge from Metav Werkzeuge in Emmerich for immediate integration into the inspection workflow Technical Data Article number: M315.575.8 GTIN: 4054469154107 Tariff number: 90173000 Facts Thread size: M75 x 3 Weight: 2 kg Standard: DIN 13, tolerance class 6H Special features Material: gauge steel, hardened Type: Go plug gauge (right-hand thread) Calibration: supplied with calibration certificate Category: Thread gauges / Inspection plug FAQ What does the Go plug gauge check? The Go plug gauge verifies whether an internal metric ISO fine thread meets the acceptance condition; the Go plug gauge M75 x 3 by Metav IndustryLine passes when the gauge enters the thread without forcing. Is the gauge ready for use on delivery? Yes, the item is supplied with a calibration certificate, so the gauge can be used immediately in documented inspection procedures. Which standard does this gauge conform to? This plug gauge is specified for DIN 13, 6H threads and is designed to check metric ISO fine threads at M75 x 3. What material is the gauge made from and why does it matter? Made from hardened gauge steel, the gauge resists wear and preserves measurement geometry, ensuring repeatable inspection results over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x3 Thread Go/No-Go Plug For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, repeatable inspection with a hardened gauge steel body, conformity to DIN 13, 6H, and an included calibration certificate for traceable results; order directly via Metav Werkzeuge or contact our consultants for application advice. Thread plug gauge M75×3 (metric ISO fine thread) — hardened gauge steel, DIN 13 6H Thread plug gauge M75×3 for right-hand metric ISO fine threads, designed for dimensional verification and conformity checks in component inspection. Calibration certificate included Hardened gauge steel construction Metric fine thread M75×3 Designed to DIN 13, 6H Consistent, repeatable thread inspection for production control A precision thread plug gauge offers a straightforward, reliable method for verifying internal threads to the metric ISO standard. The M75×3 size is tailored for fine-pitch applications where repeatability matters; using a hardened gauge ensures minimal wear and stable dimensions across repeated checks. Calibration documentation supplied with the item provides traceability for quality records and supports audit trails, so inspection results can be compared over time without ambiguity. The robust design reduces downtime by simplifying pass/fail assessments during routine process control. Conformity to standards and durable workshop performance Compliance with DIN 13, 6H signifies that the gauge matches the internal thread tolerance class commonly specified for metric ISO fine-threaded components. The tool is manufactured from hardened gauge steel, delivering resistance to abrasion and preserving measurement integrity under regular use. The gauge’s designation and construction make it suitable for workshop and inspection bench environments where mechanical handling and repeated engagement are frequent. A compact, purpose-driven form factor supports efficient handling during sample checks and helps maintain production flow without complex fixturing. Traceability, procurement and confidence in supply Supplied with a calibration certificate, this gauge supports documented measurement assurance in incoming inspection and final quality checks, reducing risk of undetected deviations. Procuring from Metav IndustryLine benefits from Metav’s established supply chain and quality screening from Emmerich: a transparent logistics base and decades of metrology expertise ensure dependable delivery and product consistency. For process engineers and quality managers, the combination of standard conformity, robust material, and traceable calibration translates into fewer reworks and clearer go/no-go decisions on shop-floor inspection. For procurement or technical consultation regarding the suitability of this Metav IndustryLine thread plug gauge for specific inspection tasks, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich Technical data Article number: M315.675.8 GTIN: 4054469154299 Designation: Thread plug gauge M75×3 (AUSSCHUSS) Weight: 2 kg Facts Thread size: M75 × 3 Tolerance class: 6H Tariff code: 90173000 Special features Material: gauge steel, hardened Right-hand metric ISO fine thread Supplied with calibration certificate Conforms to DIN 13 FAQ What is the intended application for this thread plug gauge? This thread plug gauge M75×3 (Metav IndustryLine, SKU M315.675.8) is intended for verification of right-hand metric ISO fine threads in incoming inspection and process control. Does the gauge come with traceable calibration? Yes, the gauge is supplied with a calibration certificate, enabling traceability for quality systems and audit purposes. What does the designation DIN 13, 6H mean for usability? The DIN 13, 6H designation indicates the internal thread tolerance class the gauge is manufactured to, ensuring compatibility with components specified to that standard. Is the gauge suitable for frequent workshop use? Constructed from hardened gauge steel, the instrument is designed for durability under regular inspection cycles and maintains dimensional stability over time. What does "AUSSCHUSS" in the designation imply? The designation on the item includes "AUSSCHUSS" (reject); please consult Metav Werkzeuge for clarification regarding intended inspection role or specific labelling context. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x3 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of robust gauge steel construction and the DIN 13 tolerance class to secure consistent thread inspection, plus the reassurance of a supplied calibration certificate for traceable results. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge NO‑GO M75 x 3.0 — hardened gauge steel, DIN 13 (6g) A NO‑GO thread ring gauge for metric ISO fine threads, specified for right‑hand M75 x 3.0 profiles and intended for reliable quality control in production and incoming inspection. Hardened gauge steel construction DIN 13 tolerance class 6g Metric M75 x 3.0 fine‑pitch thread Supplied with calibration certificate Minimise rework with concise, objective inspection A purpose‑built NO‑GO ring offers a fast, unambiguous check during routine control: if the ring refuses to pass, the thread exceeds the permitted maximum material condition and the part is flagged for rejection. Using a dedicated reject gauge reduces subjective judgement and accelerates throughput, because acceptance criteria are binary and immediately reproducible. The hardened gauge steel body maintains its geometry under repeated use, helping to ensure consistent pass/fail decisions on the shop floor and in the receiving bay. Engineered for durability and process stability The component is produced to DIN 13 with tolerance class 6g, which aligns with common engineering specifications for ISO metric fine threads. The right‑hand M75 x 3.0 geometry is suitable for large fastening applications where thread integrity is critical; the hardened material resists wear from regular gauging and supports stable measurement over time. For production environments the gauge’s robust construction contributes to lower maintenance intervals and fewer calibration‑induced downtimes, thereby supporting continuous operation and predictable quality performance. Traceable calibration to support quality systems Delivered with a calibration certificate, the gauge enters inspection routines ready for immediate use in quality management workflows. The certificate documents the inspection state at delivery and provides traceability for audits or supplier controls. This simplifies record keeping and supports compliance with internal quality procedures. For organisations integrating gauging into systematic inspection plans, the supplied documentation shortens the path to verified measurement capability and reduces administrative effort for initial qualification. For purchase advice, availability and calibration details for this Metav IndustryLine NO‑GO thread ring gauge, please contact Metav Werkzeuge in Emmerich for expert guidance and order handling Technical data Article number: M315.875.8 GTIN: 4054469154671 Tariff number: 90173000 Norm: DIN 13, 6g Facts Thread size: M75 x 3.0 Weight: 2 kg Right‑hand thread: yes Category: Gauges (Lehren) Special features Material: hardened gauge steel Function: NO‑GO (reject) thread ring Application: metric ISO fine threads Delivered with calibration certificate FAQ What is the intended use of this NO‑GO thread ring gauge? The NO‑GO ring is intended to verify that M75 x 3.0 threaded parts do not exceed the maximum material limit; the Metav IndustryLine NO‑GO thread ring gauge (SKU M315.875.8) provides a clear pass/fail result for production and incoming inspection. Does the gauge come ready to use from delivery? Yes: the gauge is supplied with a calibration certificate, so the thread ring gauge is documented for measurement status at delivery and may be used immediately within the purchaser’s quality system. Which standard and tolerance class does the gauge conform to? The tool conforms to DIN 13 with a tolerance class of 6g, matching common ISO metric fine‑thread specifications for engineering and assembly contexts. Is the ring suitable for left‑hand threads or other pitches? This specific item is manufactured for right‑hand threads with a pitch of 3.0 mm. For other directions or pitches, alternative gauges should be selected. How does the hardened material benefit daily use? Hardened gauge steel increases wear resistance and dimensional stability under frequent engagement, which helps preserve the gauge geometry and maintain reliable pass/fail inspection over prolonged production cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x4 Thread Go Ring For Metrical ISO Fine Thread, Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, standard‑compliant thread verification with a hardened gauge‑steel construction, DIN 13 tolerance class 6g and an inclusive calibration certificate for immediate use; order the Go thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go thread ring gauge M75×4.0 — Metav IndustryLine (right‑hand, metric ISO fine thread) The Go thread ring gauge M75×4.0 is designed for rapid, repeatable inspection of metric ISO fine threads in production and quality control environments Go ring gauge M75×4.0 metric ISO Hardened gauge steel construction DIN 13 tolerance class 6g Right‑hand thread inspection Includes calibration certificate Fast, compliant thread verification for production lines The ring gauge checks threads quickly and reliably, enabling efficient in‑process and incoming inspection workflows. Built for the task, the M75×4.0 sizing and metric ISO fine thread geometry offer unambiguous go/no‑go decision making that reduces stoppages and rework. By employing a dedicated ring instead of time‑consuming measurement setups, traceable checks can be completed in seconds, keeping throughput high while maintaining documented conformity. Durable construction that protects measurement integrity Manufactured from gauge steel, hardened, the gauge resists wear across repeated use, preserving gauge form and tolerance over long production runs. The adherence to DIN 13 and 6g tolerance class ensures compatibility with common engineering specifications, providing confidence in interchangeability and acceptance criteria. Supplied with a calibration certificate, the tool is ready for audit‑grade inspection processes and traceability chains without additional preparatory steps. Practical advantages and supply assurance from Metav IndustryLine As a Go gauge, the item simplifies accept/reject decisions for right‑hand threads and is marked for clear operation in shop environments. Packaged and dispatched from Metav’s Emmerich hub, the product benefits from streamlined logistics and a European quality‑filter approach; Metav IndustryLine supports workshops and production facilities with a broad range of precision tools and verification artefacts. The robust SKU identification (M315.775.9) facilitates stock control and procurement integration for maintenance and inspection schedules. For calibrated, DIN‑compliant thread inspection from Metav IndustryLine, contact Metav Werkzeuge to arrange supply or technical consultation from our Emmerich centre Technical data Article number: M315.775.9 GTIN: 4054469155210 Label: Go thread ring gauge GUT M 75 X 4,0 for metric ISO fine thread, right‑hand Material: Gauge steel, hardened Norm: DIN 13, 6g Special note: Calibration certificate included Core specifications Nominal diameter: 75 mm Thread pitch: 4.0 mm Tolerance class: 6g Weight: 2 kg Tariff number: 90173000 Special features Go gauge (GUT) function Right‑hand thread Calibration certificate supplied Hardened gauge steel construction Category: Thread gauges / gauges FAQ What nominal size and pitch does this gauge inspect? The Go thread ring gauge M75×4.0 inspects a nominal diameter of 75 mm with a 4.0 mm pitch, corresponding to standard metric fine‑thread geometry. Is the gauge delivered ready for use with traceable documentation? Yes — the item is supplied with a calibration certificate, so the gauge can be integrated immediately into inspection routines with documented traceability. Which tolerance class and standard apply to this ring gauge? This ring conforms to DIN 13 with tolerance class 6g, suitable for standard metric ISO fine‑thread acceptance criteria. What material is the gauge made from and how does that affect lifetime? The gauge is manufactured from hardened gauge steel, which increases wear resistance and preserves form accuracy across extended inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x4 Thread Ring Gauge Metric ISO Fine Right-Hand, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
Combine the robustness of hardened gauge steel, the DIN 13, 6g specification and the included calibration certificate for dependable thread inspection; order the ring gauge directly via Metav Werkzeuge or consult our advisors for application support. Ring gauge (No‑go) M75 x 4.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) A Ring gauge (No‑go) M75 x 4.0 is designed for rapid verification of right‑hand metric ISO fine threads in production and inspection environments, providing a clear pass/fail control by the defined DIN 13, 6g tolerance. No‑go ring gauge for M75 x 4 threads Hardened gauge steel construction Supplied with calibration certificate Manufactured to DIN 13 tolerance class 6g Ensure threads meet specification before assembly The no‑go ring gauge serves as a compact, unequivocal inspection tool for production lines and inspection benches. By confirming that a threaded part does not accept the no‑go gauge, the device enforces the upper material limit defined by DIN 13 and 6g tolerance, preventing out‑of‑spec components from entering assembly. This direct quality control method reduces rework and scrap rates while supporting consistent interchangeability of threaded connections. The gauge’s designation as a no‑go instrument makes judgement immediate and operator‑resistant, which is ideal for routine in‑process checks. Durable build for long service life and repeatable results Manufactured from hardened gauge steel, the component is designed for high wear resistance and dimensional stability under repeated use. The material choice minimises profile wear, preserving the gauge geometry that defines conformity checks. Delivered as a single, robust unit with a net weight of 2 kg, the tool offers tactile feedback and stable handling during inspection. The combination of material and finish ensures that calibration intervals are extended and measurement uncertainty is reduced, supporting predictable maintenance cycles and lower total cost of ownership. Traceability and documented calibration for audit readiness This gauge is supplied with calibration certificate, making it straightforward to integrate into quality systems that require traceable measurement equipment. The certificate documents the verification status at delivery, facilitating acceptance into accredited inspection routines and providing evidence for internal audits. For organisations that maintain strict documentation of inspection tools, the included paperwork removes administrative overhead and supports compliance workflows. Simple to use within production and inspection workflows The gauge’s function is intentionally simple: insertion of the ring into the threaded part confirms whether the thread profile exceeds the allowed maximum — if the no‑go ring does not fit, the part passes that particular limit check. Marked for right‑hand threads and sized M75 x 4, the gauge is suitable for fine‑pitch metric applications common in precision assemblies and mechanical components. Its clarity of purpose makes it suitable for line operators and inspection technicians who need fast, reproducible decisions without complex measurements. For documented thread control and reliable production checks, contact Metav Werkzeuge to obtain the Metav IndustryLine No‑go ring gauge M75 x 4, supplied calibrated with certificate and ready for immediate use in quality assurance programmes. Technical Data Article number: M315.875.9 GTIN: 4054469155395 Tariff number: 90173000 Facts Size: M75 x 4 Weight: 2 kg Standard: DIN 13, 6g Special features Material: Hardened gauge steel Thread hand: Right‑hand Type: No‑go (reject) ring gauge Delivery: Supplied with calibration certificate FAQ What does a no‑go ring gauge check? A no‑go ring gauge verifies that a threaded part does not exceed the maximum material limit; the Metav IndustryLine no‑go ring gauge M75 x 4 confirms compliance with the upper tolerance defined by DIN 13, 6g. Is the gauge ready for use on delivery? Yes, the gauge is delivered with a calibration certificate, so the Metav IndustryLine ring gauge M75 x 4 can be entered into inspection inventories and used immediately in documented quality processes. Which thread standard does this gauge follow? The instrument is manufactured to DIN 13 and tolerance class 6g, matching common metric ISO fine‑thread requirements for mechanical assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x6 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calib. Certificate - Metav IndustryLine
Benefit from a hardened gauge‑steel construction, conformity to DIN 13, tolerance 6H, and a supplied calibration certificate to secure repeatable acceptance checks for M75 × 6.0 metric fine threads; order directly via Metav Werkzeuge or consult the specialists for application advice. Thread Gauge Mandrel GUT M75 × 6.0 — Right‑hand, DIN 13 6H A Thread Gauge Mandrel GUT M75 × 6.0 designed for verification of metric ISO fine internal threads in production and inspection environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Thread size M75 × 6.0, right‑hand Ensured conformity for routine inspection The GO mandrel function provides an unambiguous acceptance check for internal threads: if the mandrel enters, the thread is compliant with the specified limits. Built to DIN 13 with 6H tolerance, this mandrel supports standardised inspection procedures and reduces decision time on the shop floor. The geometry addresses the metric fine‑thread profile and pitch (M75 × 6.0 mm), allowing straightforward verification without interpretative measurement steps. This clarity saves inspection time and contributes to stable production throughput. Stable construction for reproducible results Manufactured from hardened gauge steel, the mandrel offers high stiffness and wear resistance under repeated use. The material choice and heat treatment maintain profile fidelity during serial checks, limiting dimensional drift and extending service life. At approximately 2 kg, the weight balances robustness and handling, so the mandrel remains easy to seat in gauges or fixtures while providing the mass needed for stable contact. The right‑hand thread form is machined to retain profile accuracy across repeated engagement cycles. Traceability and calibration support quality systems Delivery includes a calibration certificate, documenting the inspection status at dispatch and enabling traceability within a quality management system. The supplied certificate is suitable for incorporating the mandrel into routine sample plans and audit trails; details recorded on the certificate support acceptance during internal or external audits. For organisations seeking documented evidence of conformity, this feature reduces administrative lead time and strengthens audit readiness. Practical integration into inspection workflows The mandrel suits workshops, inspection benches and small dimensional control stations where metric ISO fine threads require fast go/no‑go validation. As a dedicated acceptance gauge, it complements other measuring equipment and can be used alongside gauge blocks, comparators or precision callipers to provide a pragmatic inspection regime. Where a quick go/no‑go decision is preferred over full metrological characterisation, the mandrel reduces measurement complexity while maintaining compliance with recognised thread standards. Contact Metav Werkzeuge for tailored advice on integrating the GUT M75 × 6.0 thread gauge mandrel into inspection routines and to arrange supply; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.575.A GTIN: 4054469155524 Weight: 2 kg Material: gauge steel, hardened Standard: DIN 13, 6H Facts Thread size: M75 × 6.0 mm Tolerance class: 6H Customs tariff number: 90173000 eClass: 21170228 Special features Supplied with calibration certificate GO gauge (GUT) for acceptance testing Right‑hand thread form Category: gauges / gauge pins FAQ Is this mandrel a GO or NOGO gauge? The mandrel is a GO gauge (GUT) intended to verify acceptance of internal threads; if the GUT M75 × 6.0 mandrel enters, the thread meets the specified limits. Which standard does the gauge comply with? Conformity is to DIN 13 with tolerance class 6H, ensuring the mandrel matches common metric ISO fine‑thread specifications. Is a calibration certificate included with delivery? Yes, the tool is supplied with a calibration certificate documenting its inspection status at dispatch. What material and treatment does the mandrel have? The mandrel is made from gauge steel, hardened to provide wear resistance and dimensional stability during repeated use. What is the SKU for ordering and identification? The article is listed as SKU M315.575.A and can be referenced when ordering through Metav Werkzeuge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x6 Thread Go Ring For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g With Calibration Certificate - Metav IndustryLine
Taking advantage of precise DIN 13, 6g tolerancing and a hardened gauge steel construction, this thread ring gauge ensures repeatable verification of right‑hand metric fine threads and reduces rework in production. Supplied with a calibration certificate, the gauge is ready for immediate use; order the Go thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Go thread ring gauge GUT M75 x 6.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) A GUT M75 x 6.0 thread ring gauge, designed for fast, repeatable verification of right‑hand metric ISO fine external threads in quality control and workshop inspection. Hardened gauge steel construction DIN 13, tolerance class 6g Calibrated; includes calibration certificate Right‑hand metric M75 x 6.0 specification Ensure thread conformity with industry tolerances The Go thread ring gauge verifies external threads to DIN 13 with tolerance class 6g, providing a clear, objective pass criterion for production lots. Using a dedicated ring gauge removes subjective judgement from thread checks: when the ring enters the thread smoothly, the part meets the specified tolerance; when it does not, the component is rejected for rework. This straightforward check accelerates inspection routines and lowers the risk of assembly failures, making it an efficient quality‑assurance tool for batch production and incoming inspection. Durable construction for stable dimensional performance Manufactured from hardened gauge steel, the gauge resists wear and preserves measuring geometry over time, which supports long intervals between regrinding or replacement. The robust material and heat treatment deliver stable contact surfaces that minimise profile damage to the inspected parts while maintaining the ring’s geometry under repeated use. The physical design accommodates standard handling in machine shops and inspection benches; the solid build contributes to consistent results across repeated checks and reduces overall tooling costs by extending service life. Ready‑to‑use traceability and shop integration Supplied with a calibration certificate, this gauge arrives ready for documented use in quality systems and production records, easing traceability requirements. The compact nature of a ring gauge simplifies storage and handling compared with larger measuring fixtures, and the clear Go/No‑Go logic speeds operator decisions on the shop floor. Suitable for routine verification tasks in mechanical engineering and toolmaking, the gauge integrates seamlessly into existing inspection plans and supports statistical process control by delivering reproducible, binary measurement outcomes. Contact Metav Werkzeuge in Emmerich for purchase enquiries or technical advice on integrating the Metav IndustryLine Go thread ring gauge into inspection workflows — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: M315.775.A SKU: M315.775.A GTIN: 4054469155784 Tariff number: 90173000 Weight: 2 kg Facts Size: M75 x 6.0 Tolerance class: 6g Standard: DIN 13 Special features Material: hardened gauge steel Right‑hand metric thread Supplied with calibration certificate GUT (Go) marking for pass verification FAQ What tolerance and standard does the gauge check? The ring verifies external threads to DIN 13 with tolerance class 6g, ensuring conformity to the metric ISO fine‑thread specification. Is the gauge ready for documented inspection work on delivery? Yes; the gauge is supplied with a calibration certificate, enabling immediate use in documented quality procedures. What material is the gauge manufactured from? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated use. Can the gauge be used on left‑hand threads? This particular ring is produced for right‑hand metric threads; left‑hand versions must be ordered separately. Which part number identifies this gauge? The article number and SKU is M315.775.A and the GTIN is 4054469155784, useful for purchasing and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75x6 Thread Go/No-Go Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of precise reject detection, robust hardened‑steel construction and an included calibration certificate to protect production quality and reduce rework. Order the calibrated gauge directly via Metav Werkzeuge or consult the team for integration advice. Thread ring gauge NO‑GO M75 x 6.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) the Thread ring gauge NO‑GO M75 x 6.0 — for quick verification of metric ISO fine threads, right‑hand Includes calibration certificate Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M75 x 6.0 metric fine thread, right‑hand Reliable reject detection for faster quality decisions A dedicated no‑go thread ring is an efficient, low‑effort tool for separating non‑conforming parts at the point of inspection. By providing a clear go/no‑go outcome for the M75 x 6.0 metric fine thread, the gauge reduces subjective judgement and prevents faulty assemblies from progressing through production. The result is measurable time savings at the inspection stage and fewer downstream rejects, improving overall process yield and throughput. Robust construction for long service life and repeatable results Manufactured from hardened gauge steel and produced to DIN 13 with a 6g tolerance, this ring gauge is built for repeated use in workshop and shop‑floor environments. The material choice ensures dimensional stability and wear resistance, so the pass/fail boundary remains consistent over many cycles. A supplied calibration certificate documents the initial state of the gauge and supports traceability in quality records, simplifying audits and routine verification activities. Practical use in inspection routines and production control Weighing 2 kg, the ring gauge is compact enough for handheld or bench use while offering the mass and geometry needed for stable engagement with threaded parts. Designed for right‑hand metric ISO fine threads, it suits incoming inspection, in‑process checks and final control of components with the M75 x 6.0 profile. When integrated into a standard inspection routine, the gauge reduces measurement time per part and supports faster decision‑making, which in turn lowers scrap rates and protects downstream assembly quality. For Metav IndustryLine calibrated gauges such as this M75 x 6.0 no‑go ring, contact Metav Werkzeuge for technical advice and prompt delivery from Emmerich. Technical Data Article number: M315.875.A GTIN: 4054469155913 Weight: 2 kg Facts Size: M75 x 6.0 Tolerance class: 6g Thread direction: right‑hand Standard: DIN 13 Special features Material: hardened gauge steel Type: no‑go (reject) thread ring gauge Includes calibration certificate Suitable for metric ISO fine threads FAQ What is the intended use of this ring gauge? The ring gauge is designed as a no‑go (reject) check for M75 x 6.0 metric ISO fine threads to quickly identify non‑conforming parts during inspection. Does the gauge come with traceable documentation? Yes, the gauge is supplied with a calibration certificate that documents its measured condition at delivery. Which standard does the ring gauge comply with? The gauge is manufactured to DIN 13 and produced to a 6g tolerance class for metric ISO fine threads. Is this gauge suitable for left‑hand threads? No, this specific item is for right‑hand metric ISO fine threads only; ensure thread direction matches application. Can the gauge be used on hardened or coated parts? The ring gauge itself is made from hardened gauge steel; compatibility with specific part treatments depends on wear considerations and inspection frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com