Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M80x3 Thread Go Gauge For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel construction and DIN 13 / 6g conformity together with an included calibration certificate to secure reproducible thread inspections in production. Order the ring gauge directly via Metav Werkzeuge or contact the consultants for specification support. Thread ring gauge GO M80 x 3.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) Thread ring gauge GO M80 x 3.0 for fast verification of external metric ISO fine threads in production control and incoming inspection. Hardened gauge steel construction DIN 13 tolerance class 6g Includes calibration certificate Right‑hand M80 x 3 metric fine thread Accurate inline checks accelerate production control A dedicated thread ring gauge provides a simple and reliable verification step for external threads. The GO gauge confirms that an external thread does not exceed the maximum material limit defined by DIN 13 / 6g, allowing quick pass/fail decisions at the workstation. By reducing the need for time‑consuming measurements and rework, the gauge supports lean workflows and improves throughput while maintaining consistent part quality. The compact check procedure is particularly effective for batch inspection and random sampling during process control. Robust design for repeatable measurement results Constructed from hardened gauge steel, this ring gauge resists wear and retains geometry under repeated use, which preserves repeatability and reduces replacement frequency. The right‑hand M80 x 3 form is ground to the required profile for metric ISO fine threads and is intended for direct thread conformity checks. A GO ring gauge is used to ensure that threads fall within acceptable limits; it should engage the external thread smoothly when the part is within specification. The material choice and mechanical finish together extend service life and lower the total cost of ownership through fewer tool changes. Traceability and quality documentation for audits Delivery includes a calibration certificate, enabling traceable documentation for quality systems and audit trails. The supplied certificate documents the condition of the gauge at the time of calibration and can be retained alongside inspection records to demonstrate compliance with company procedures. For controlled manufacturing environments, this traceability simplifies integration into existing inspection routines and supports objective evidence requirements during supplier assessments or quality audits. Contact Metav Werkzeuge for a technical consultation and to secure the Thread ring gauge GO M80 x 3.0 with its calibration certificate for immediate use in production control. Technical data Article number: M315.780.8 GTIN: 4054469154503 Tariff number: 90173000 Facts Weight: 2 kg Size/Thread: M80 x 3 Standard: DIN 13, 6g Good/Type: GO (GUT) Special features Material: hardened gauge steel Right‑hand metric ISO fine thread Supplied with calibration certificate Category: gauges / ring gauge FAQ What is the purpose of this ring gauge? The ring gauge is used to verify external metric ISO fine threads by providing a rapid GO check to confirm parts meet the DIN 13 / 6g limits for M80 x 3 threads. Is the gauge supplied with traceable calibration? Yes, the Thread ring gauge GO M80 x 3.0 is delivered with a calibration certificate documenting its condition at the time of calibration. Which material is the gauge made from? The ring gauge is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated inspections. Can this gauge be used for left‑hand threads? This model is a right‑hand GO gauge for M80 x 3 metric ISO fine threads; left‑hand versions require a dedicated left‑hand gauge. What is the article number for ordering? The SKU for ordering is M315.780.8; this reference corresponds to the GO ring gauge for M80 x 3. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x3 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of proven thread verification with hardened gauge steel construction, DIN 13 tolerance class 6H and a supplied calibration certificate for immediate use in inspection routines. Benefit from a rugged, right‑hand Go plug gauge that supports repeatable acceptance checks; order directly via Metav Werkzeuge or ask the Metav consultants for further guidance. Go thread plug gauge M80 x 3.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) A Go thread plug gauge M80 x 3.0 designed for fast, reliable verification of metric ISO fine internal threads in production and quality control environments Hardened gauge steel construction DIN 13 tolerance class 6H M80 x 3.0 metric fine thread Right‑hand 'Go' plug gauge Supplied with calibration certificate Rapid and reliable thread acceptance for production lines The plug gauge serves as a direct acceptance check for internal threads, enabling fast pass/fail decisions on the shop floor. Built to the DIN 13 standard with tolerance class 6H, the gauge verifies that a threaded bore meets the dimensional and form requirements for metric fine threads. As a Go gauge it confirms acceptable geometry without delivering measurement values, which speeds up in‑process control and reduces cycle time. This approach supports a lean inspection routine and keeps throughput consistent while maintaining conformity to thread standards. Durable construction for repeatable checks and long service life Manufactured from hardened gauge steel, the device offers high wear resistance and dimensional stability across repeated use. The robust material choice and the solid construction ensure the gauge keeps form under regular contact, reducing the need for frequent replacements and maintaining reproducible acceptance results. The right‑hand thread design matches standard metric assembly practice, while the compact format and balanced mass provide stable handling during quick functional tests in assembly or incoming inspection. Traceable calibration for quality systems and audits Supplied with a calibration certificate, the gauge is ready for integration into documented quality workflows and traceability chains. The certificate documents the checked characteristics and provides evidence for internal audits or external inspections. Traceability of the inspection tool increases confidence in acceptance decisions and supports consistent quality reporting across batches. The combination of standard conformity, hardened material and certified delivery forms a pragmatic basis for production monitoring and quality assurance programmes. Contact Metav Werkzeuge to obtain the Metav IndustryLine Go thread plug gauge M80 x 3.0 with calibration certificate and expert advice tailored to industrial inspection requirements Technical Data Article number: M315.580.8 GTIN: 4054469154121 Tariff number: 90173000 Weight: 2 kg Facts Thread size: M80 x 3.0 Tolerance class: 6H Standard: DIN 13 Special features Material: gauge steel, hardened Type: Go plug gauge (acceptance) Thread hand: right‑hand Delivery: calibration certificate included Brand: Metav IndustryLine FAQ What is the purpose of this plug gauge? The plug gauge is used for acceptance testing of internal metric threads; the Go gauge confirms that the bore complies with the specified geometry for M80 x 3.0 fine threads. Is the gauge supplied ready for use in quality documentation? Yes. The plug gauge is delivered with a calibration certificate, enabling immediate incorporation into traceable quality procedures. Which standard and tolerance does the gauge follow? The device conforms to DIN 13 and is manufactured to tolerance class 6H, matching common metric internal thread specifications. What material and durability can be expected? Made from hardened gauge steel, the gauge is designed for high wear resistance and repeatable functional checks over extended service life. Can this gauge check left‑hand threads? This specific item is a right‑hand Go plug gauge for M80 x 3.0; left‑hand thread checks require a corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x3 Thread Go/No-Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of a robust inspection tool that combines hardened gauge steel with standardised tolerances to prevent non‑conforming threads reaching assembly; the included calibration certificate provides traceability for quality records. Order the gauge via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (NO‑GO) M80×3.0 — No‑go gauge for metric ISO fine threads, right‑hand (Metav IndustryLine) Thread plug gauge (NO‑GO) M80×3.0 is a right‑hand inspection gauge designed to verify the rejection limit of metric ISO fine threads in production and incoming inspection. NO‑GO thread plug gauge M80×3 right‑hand Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6H Supplied with calibration certificate included Prevent rejects reaching assembly with a clear go/no‑go function A dedicated no‑go plug gauge provides an immediate, objective check: the gauge must not enter a correctly made thread beyond the rejection limit. By using a dedicated reject gauge for the M80×3.0 profile, production lines and inspection benches gain a fast, unambiguous decision criterion that reduces rework and warranty exposure. The measure is simple to apply in repetitive testing routines and integrates directly into quality control checkpoints, supporting faster throughput with fewer subjective judgements. Engineered for durability and measurable conformity Manufactured from hardened gauge steel, the tool resists wear under frequent contact and preserves the inspection limit over long service intervals. Compliance with DIN 13, 6H ensures the gauge reflects the recognised metric ISO fine‑thread tolerance system, so results are comparable across suppliers and customers. The supply includes a calibration certificate, which documents measurement conformity and creates traceability for audit trails and quality systems without the need for additional paperwork. Practical use: clear advantages for workshop and QC staff The simple form factor of a plug gauge keeps handling economical: it is designed for handheld checks and bench fixtures, making routine checks straightforward in busy environments. As a purpose‑built reject gauge it eliminates ambiguous fit assessments and speeds decision making during incoming inspection, set‑up verification and routine process audits. The robust construction and standardised thread profile make the gauge suitable for long‑term deployment in production, inspection and maintenance contexts. Request the Metav IndustryLine NO‑GO thread plug gauge M80×3.0 from Metav Werkzeuge or contact our consultants at Metav Werkzeuge for tailored advice and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.680.8 GTIN: 4054469154312 Label: Thread plug gauge NO‑GO M80×3.0 for metric ISO fine thread, right‑hand Brand: Metav IndustryLine Material: Gauge steel, hardened Standard: DIN 13, 6H Facts Nominal diameter: 80 mm Thread pitch: 3.0 mm Weight: 2 kg Tariff number: 90173000 Special features NO‑GO (reject) plug gauge function for quick assessment Right‑hand metric ISO fine thread profile Supplied with calibration certificate for traceability Hardened gauge steel for wear resistance Intended for production and incoming inspection use FAQ What is the function of a NO‑GO plug gauge? A NO‑GO plug gauge checks the rejection limit of a threaded hole; the Thread plug gauge (NO‑GO) M80×3.0 must not fit into a correctly produced thread beyond the allowed tolerance. Is the gauge suitable for formal inspection records? Yes, the gauge is supplied with a calibration certificate so the Metav IndustryLine NO‑GO plug gauge can be recorded in quality documentation and audits. Which standard does the gauge conform to? The tool conforms to DIN 13, tolerance class 6H, matching the metric ISO fine‑thread specification used in many industrial assemblies. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel; this ensures durability and limits dimensional change through wear, preserving the rejection limit over time. Can the gauge be used on left‑hand threads? This specific item is a right‑hand thread gauge; left‑hand checks require the corresponding left‑hand gauge with the same nominal size and pitch. How is the M80×3.0 gauge typically applied in production? It is used for go/no‑go checks during incoming inspection, set‑up verification and periodic process control to prevent non‑conforming threaded parts entering assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x3 Thread Go/No-Go Ring Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Benefit from uncompromising inspection capability with the combination of hardened gauge steel, DIN 13, 6g conformity and a supplied calibration certificate for reliable pass/fail control. Use this no‑go thread ring gauge to secure process quality and reduce rework. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge (No‑Go) M80 x 3.0 — metric ISO fine thread, right‑hand | Metav IndustryLine Thread ring gauge (No‑Go) M80 x 3.0 — a right‑hand, metric ISO fine thread limit gauge for inspection and quality assurance in production and metrology Hardened gauge steel construction For metric ISO fine thread M80 x 3.0 Right‑hand no‑go (Ausschuss) gauge Supplied with calibration certificate Ensure reliable rejection control in thread production A dedicated no‑go thread ring gauge delivers a clear binary result where dimensional conformity matters most. The M80 x 3.0 limit gauge is designed for quick verification of internal thread tolerances according to DIN 13, 6g, enabling inspectors to separate compliant parts from rejects without ambiguous measurement interpretation. By using a Go/No‑Go approach the inspection process is accelerated and the risk of incorrectly passed components is reduced, which improves first‑time quality rates in series production. Robust build for repeatable measurements Constructed from gauge steel, hardened, the ring provides the stiffness and wear resistance required for repeated use at the inspection bench. The rigid design keeps deformation to a minimum during handling and engagement, so tolerances remain stable over many cycles. The gauge’s mass and finish ensure a consistent tactile feedback when checking threads, which supports repeatability and reduces operator variability in routine checks. Traceable calibration for documented quality assurance The instrument is supplied with calibration certificate, delivering traceability and documented evidence of the gauge condition at delivery. This simplifies incoming inspection and audit trails for quality systems. The calibration documentation accompanies the gauge and confirms compliance with the stated tolerance regime, making it suitable for use in regulated production environments and for integration into quality control plans. Practical integration into workshop and inspection routines As a right‑hand no‑go ring for metric ISO fine threads, the gauge slots directly into shop‑floor and laboratory workflows: fit it to the inspection station, compare simple Go/No‑Go results, and log decisions for process control. The compact, single‑purpose format minimises set‑up time compared with variable measuring instruments and frees skilled metrology resources for complex tasks. For repeat checks, the gauge reduces measurement time while supporting consistent pass/fail criteria. Choose the Metav IndustryLine M80 x 3.0 no‑go thread ring gauge for robust, documented rejection control — contact Metav Werkzeuge GmbH in Emmerich for tailored advice or to request the product. Technical data Article number: M315.880.8 GTIN: 4054469154695 eClass: 21170214 Customs tariff number: 90173000 Numbers / Core technical data Size: M80 x 3.0 Weight: 2 kg Standard: DIN 13, 6g Special features Material: gauge steel, hardened Type: no‑go (reject) thread ring gauge, right‑hand Supplied with calibration certificate Category: Gauges / Go/No‑Go gauges FAQ What does the no‑go designation mean for this thread ring gauge? The no‑go designation indicates that the thread ring gauge (No‑Go) M80 x 3.0 is intended to detect oversize or out‑of‑tolerance threads; engagement denotes a reject according to the limit criteria. Is the gauge suitable for metric ISO fine threads only? Yes, the instrument is specified for metric ISO fine thread form and pitch as shown by the M80 x 3.0 marking and the reference to DIN 13, 6g. Does the gauge come with calibration documentation? The delivery includes a calibration certificate, providing traceability and a recorded condition of the gauge at the time of supply. What material is the ring made from and why does it matter? The ring is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability to maintain accuracy across repeated inspections. Which SKU identifies this specific gauge? The product is listed under SKU M315.880.8, which corresponds to the Metav IndustryLine no‑go thread ring gauge M80 x 3.0. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x4 Go Thread Plug Gauge For Metric ISO Fine Thread Right Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and conformity to DIN 13, 6H for reliable thread verification; the plug gauge is supplied with a calibration certificate to support traceability and quality control. Order the calibrated thread gauge directly via Metav Werkzeuge or request consultancy for application-specific selection. Thread plug gauge GUT M80×4 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Gewinde-Lehrdorn GUT M 80 X 4,0 is a right-hand thread plug gauge designed for precise verification of metric ISO fine threads in production and inspection environments. Thread plug gauge M80×4, right-hand Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance 6H Assured dimensional conformity for production control This plug gauge verifies internal thread geometry against the DIN 13 standard and the 6H tolerance position, providing a clear, objective check of manufactured threads. Built to confirm both pitch and form, the gauge reduces uncertainty in acceptance decisions and supports consistent batch quality. The measurable advantage is a documented inspection step that fits into standard incoming or in-process quality control routines, improving traceability and preventing costly rework. Durable construction for repeated use Manufactured from hardened gauge steel, the tool combines wear resistance with stable geometry to deliver repeatable results over a prolonged service life. The robust material choice minimises profile wear during frequent engagement, which in turn preserves measurement integrity and reduces replacement frequency. For workshops and inspection labs, this means fewer interruptions for gauge replacement and lower long-term tool costs due to sustained dimensional stability. Delivered with calibration traceability The gauge is supplied with calibration certificate, ensuring that each inspection result is traceable and can be incorporated into quality documentation. This standard calibration supports quality management systems and audit cycles by proving that the measuring implement met a documented acceptance procedure at the time of delivery. The certificate facilitates record-keeping and can be referenced during supplier audits or internal quality reviews. Practical application in workshop and inspection As a right-hand metric ISO fine thread verification tool, the gauge is intended for functional thread checking in assembly-prep, final inspection, and process control. Its form and pitch compatibility make it suitable for routine go/no-go assessments or for validating production setups before machining runs. The compact, straightforward design supports rapid handling on the shop floor while maintaining the technical rigour required in industrial quality assurance. For calibrated thread gauges from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for technical advice and procurement via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: M315.580.9 GTIN: 4054469154879 Weight: 2 kg Material: Gauge steel, hardened Thread size: M80×4 Thread direction: Right-hand Standard: DIN 13, 6H Delivered with calibration certificate Numeric Data Nominal diameter: 80 mm Thread pitch: 4.0 mm Tariff number: 90173000 Weight (approx.): 2.0 kg Materials & Features Hardened gauge steel construction Metric ISO fine thread verification Right-hand thread plug gauge Supplied with calibration certificate Category: Gauges / Plug gauges FAQ What thread size and pitch does this gauge check? The thread plug gauge checks a metric ISO fine thread of M80×4, verifying nominal diameter 80 mm with a 4.0 mm pitch; it is specified as a right-hand gauge (SKU M315.580.9). Is the gauge supplied calibrated and traceable? Yes, the gauge is supplied with a calibration certificate, providing traceability and documentation suitable for quality records and inspection protocols. Which material is used for the plug gauge? The plug gauge is made from hardened gauge steel, chosen for wear resistance and long-term dimensional stability during repeated inspections. To which standard does the gauge conform? The tool conforms to DIN 13 with tolerance position 6H, ensuring compatibility with metric ISO fine-thread specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x4 Thread Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel design and DIN 13, 6g compliance for consistent thread acceptance in production and inspection workflows; the ring is supplied with a calibration certificate and can be ordered directly through Metav Werkzeuge or discussed with their technical consultants. Go thread ring M80 x 4.0 — Go gauge for metric ISO fine thread, right-hand (Metav IndustryLine) The Go thread ring M 80 x 4.0 is a hardened gauge-steel acceptance ring for right-hand metric ISO fine threads, designed for routine inspection and in-process verification in industrial environments Hardened gauge steel construction Conforms to DIN 13, 6g Supplied with calibration certificate Right-hand metric fine thread acceptor Consistent acceptance testing for production lines The Go ring provides a straightforward, repeatable method for checking whether external threads meet the specified M80 x 4.0 metric ISO fine-thread profile and tolerance class. By confirming the accept condition with a single, tactile check, the gauge reduces decision time on the shop floor and helps maintain throughput. The adherence to DIN 13, 6g gives a clear normative reference for quality control procedures, enabling traceable go/no-go decisions that integrate with existing inspection plans and minimise downtime. Calibrated traceability that supports quality systems Supplied with a calibration certificate, the gauge supports documented traceability for internal audits and third-party inspections. The delivery condition includes an inspection record that demonstrates conformity to stated dimensions, which assists in meeting internal quality requirements and external compliance checks. Where records are required for process control, the included certificate simplifies administrative follow-up and ensures the acceptance ring can be introduced into calibrated-equipment registers without delay. Robust construction for repetitive use and long service life Manufactured from hardened gauge steel, the ring resists wear in repeated contact checks and retains profile fidelity over extended use. The material choice and heat treatment ensure dimensional stability under normal handling and storage, reducing the need for frequent replacement. This durability supports reliable sampling rates in production or maintenance checks, lowering long-term inspection costs while preserving measurement confidence across many cycles. For application advice or to place an order for the Metav IndustryLine Go thread ring M 80 x 4.0, contact Metav Werkzeuge for tailored guidance and delivery options; their consultants are available to discuss suitability and integration into existing inspection routines Technical data Article number: M315.780.9 GTIN: 4054469155234 Customs tariff number: 90173000 Facts Size: M80 x 4 Type: Go ring (acceptance gauge) Thread direction: Right-hand Weight: 2 kg Special features Material: Gauge steel, hardened Standard: DIN 13, 6g Delivered with calibration certificate Go/No-Go status: Go (acceptor) FAQ What thread form and tolerance does this ring check? The ring checks the metric ISO fine thread form M80 x 4 to the tolerance class specified by DIN 13, 6g; the go condition confirms the external thread is within the accept criteria. Is a calibration certificate included with the gauge? Yes, the Go thread ring M 80 x 4.0 is supplied with a calibration certificate, enabling immediate registration in calibrated-equipment lists and supporting traceability for audits. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened gauge steel; this material provides wear resistance and dimensional stability, which preserves the thread profile for repeated acceptance tests. Can this ring be used for left-hand threads? No, this acceptance ring is designed specifically for right-hand metric ISO fine threads; left-hand versions require a different specification. How is the Go ring intended to be used in production? The ring is intended for tactile acceptance checks: the part should enter the go ring without excessive force, indicating that the external thread meets the accept criteria specified for M80 x 4.0. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x4 Thread Gauge Go, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Robust, hardened construction and conformity with DIN 13, 6g ensure reproducible go/no‑go checks for fine metric threads; the gauge is supplied with a calibration certificate for traceability and immediate use in inspection routines. Fast rejection of non‑conforming threads reduces rework and protects assembly quality. Order the (thread ring gauge No‑go M80 x 4.0) directly via (Metav Werkzeuge) or ask our consultants if needed. Thread ring gauge No‑go M80 x 4.0 (right‑hand) — hardened gauge steel, DIN 13 6g A thread ring gauge No‑go M80 x 4.0 for rapid go/no‑go verification of metric ISO fine right‑hand threads in production and incoming inspection environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Right‑hand metric ISO fine thread M80×4 Consistent pass/fail decisions for production lines The gauge provides an immediate, machine‑independent method for go/no‑go inspection, enabling rapid acceptance or rejection of threaded components. Manufactured from hardened gauge steel, the tool resists wear and maintains dimensional stability over repeated use, which supports reproducible inspection results and lowers the risk of assembly failures. Designed for fast handling, it simplifies inline quality control and reduces downtime associated with detailed measuring procedures. Traceable calibration for quality management Delivered with a calibration certificate, this gauge supports documented quality assurance and audit processes. Traceability of measurements is preserved through the supplied documentation, which helps to demonstrate conformity during incoming inspection and supports internal control plans. The combination of normative compliance (DIN 13, 6g) and a certified calibration helps production teams to rely on pass/fail decisions without additional verification steps. Robust design for workshop and inspection use The ring is optimised for workshop durability and repeatable use: robust construction and a compact form factor make it suitable for both bench inspection and shop‑floor checks. Its specification for M80×4 right‑hand metric ISO fine threads focuses the gauge on fine‑pitch applications common in precision engineering and heavy‑duty assemblies. By integrating a simple tactile check into standard work routines, the device helps to prevent defective parts from entering assembly, supporting overall process reliability. For traceable, repeatable thread checks choose the Metav IndustryLine No‑go ring gauge and contact Metav Werkzeuge in Emmerich for delivery details and calibration documentation. Technical data Article number: M315.880.9 GTIN: 4054469155418 Weight: 2 kg Material: Lehrenstahl, hardened Thread: M80×4 Standard: DIN 13, 6g Facts Tariff number: 90173000 ECLASS: 21170214 Category: Gauges / Lehren Special features No‑go (Ausschuss) thread ring gauge Right‑hand metric ISO fine thread Supplied with calibration certificate Hardened gauge steel for wear resistance FAQ What is the intended use of this gauge? The ring is intended for go/no‑go verification of metric ISO fine threads; the thread ring gauge No‑go M80 x 4.0 is used for quick acceptance checks in production and incoming inspection. Does the gauge include calibration documentation? Yes, the product is supplied with a calibration certificate, confirming traceability and immediate suitability for documented quality processes. Which standard does the gauge comply with? The ring conforms to DIN 13 with a tolerance class of 6g, suitable for standard metric ISO fine thread assessment. Is this gauge suitable for left‑hand threads? No, this specific gauge is manufactured for right‑hand threads only; left‑hand variants are not covered by this item. How durable is the gauge in a shop‑floor environment? Made from hardened gauge steel, the ring offers high wear resistance and preserves dimensional stability for repeated go/no‑go checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x4 Thread Plug Gauge For Metric ISO Fine Thread Right-Hand With Calibration Certificate DIN 13 6H - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 / 6H conformity and a supplied calibration certificate for reliable thread inspection. The right‑hand no‑go plug gauge M80 x 4.0 supports consistent pass/fail decisions in production control. Order the no‑go thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge No‑go M80 x 4.0 (right‑hand) – Metav IndustryLine Thread plug gauge No‑go M80 x 4.0 for production and laboratory inspection of metric ISO fine internal threads, designed for repeatable go/no‑go testing in quality control and incoming inspection. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Calibrated with certificate included Right‑hand M80 x 4.0 no‑go plug gauge Durable metrology for repeatable go/no‑go decisions The no‑go plug gauge is manufactured from hardened gauge steel, a choice that reduces wear and keeps the gauge within limits for longer service intervals. Built to the DIN 13 profile with 6H tolerance, the tool provides an objective physical limit for thread acceptance, eliminating subjective judgement at the production line. As a hardened inspection mandrel, it is used to verify that internal threads do not exceed the maximum permissible limits, so failed parts are detected before assembly or shipment. Traceable calibration for documented quality assurance Delivered with a calibration certificate, the gauge supports documented quality workflows and simplifies traceability in audits and batch releases. Calibration evidence is supplied with the gauge so measurement results can be referenced against a baseline; this is especially important where formal inspection records are required. The compact, solid construction and clear indication of the no‑go condition enable fast decisions on the shop floor, reducing rework and ensuring conformity with component specifications. Practical use, handling and integration into inspection routines The right‑hand M80 x 4.0 format suits fine‑pitch metric threads commonly found in mechanical assemblies and precision components. The plug gauge is operated as a simple pass/fail tool: a proper fit of the corresponding go gauge and a refusal by the no‑go gauge confirm compliance with the internal thread tolerance. Stored and handled carefully, the hardened mandrel offers long service life; routine visual checks and the documented calibration maintain reliability. For bespoke inspection plans or to match different tolerance classes, technical consultation is available to ensure the correct gauge selection for each application. Discuss application requirements or stock availability with Metav Werkzeuge; our Emmerich team will advise on the best gauge solution and supply the calibrated no‑go plug gauge tailored to production needs. Technical Data Article number: M315.680.9 GTIN: 4054469155050 Designation: No‑go thread plug gauge M80 x 4.0, right‑hand Manufacturer: Metav IndustryLine Facts Size: M80 x 4.0 Weight: 2 kg Tariff code: 90173000 Tolerance class: DIN 13 / 6H Special features Material: gauge steel, hardened Calibration: calibration certificate included Thread direction: right‑hand Category: Plug gauges / Gauges FAQ What is the primary use of this plug gauge? The plug gauge is used for pass/fail inspection of metric ISO fine internal threads; the no‑go mandrel verifies that threads do not exceed maximum limits. Is a calibration certificate supplied with the gauge? Yes, a calibration certificate is included with the supplied no‑go plug gauge to support traceability and inspection records. Which standard does the gauge follow? The gauge is manufactured to the DIN 13 profile with tolerance class 6H to match common metric ISO fine thread specifications. How is the no‑go condition interpreted in inspection? If the no‑go plug gauge does not enter the thread, the internal thread is within maximum permissible limits; entry indicates rejection. Can this gauge be used for left‑hand threads? This specific item is a right‑hand plug gauge M80 x 4.0; left‑hand versions must be ordered separately to match thread direction. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x6 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a standards‑compliant Go plug gauge combined with hardened gauge steel and an included calibration certificate for consistent acceptance testing and long service life. Order the inspection gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge Go M80 x 6.0 for metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge Go M80 x 6.0 is a hardened plug gauge for rapid acceptance checks of metric ISO fine internal threads in right‑hand form, suited to workshop inspection and incoming quality control Hardened gauge steel for long service life Conforms to DIN 13, tolerance class 6H Go gauge for quick acceptance checks Supplied with calibration certificate Reliable inspection that matches workshop practice The Go plug gauge M80 x 6.0 serves as a practical, standards‑based control instrument for verifying internal threads to the metric ISO fine series. Manufactured to DIN 13 and tolerance 6H, the gauge performs a direct pass/no‑pass check: acceptance of the workpiece is established when the Go end engages correctly. This simple principle converts dimensional specification into a repeatable shop‑floor decision, reducing interpretation time in incoming inspection and assembly testing while maintaining process traceability. Durable construction for repeatable measurements Constructed from hardened gauge steel, the plug gauge resists wear and preserves its dimensional integrity over many inspection cycles. The right‑hand thread form and fine pitch M80 x 6.0 are produced with attention to flank geometry so that profile contact is representative of functional engagement. For production environments where frequent checks are required, the material choice and finish translate into lower rework rates and predictable service intervals, supporting continuous operation and fewer interruptions to the production flow. Calibrated supply and integration into quality systems Delivery includes a calibration certificate, providing documented traceability for quality records and supporting audit requirements. The certificate documents the inspection status at dispatch and facilitates integration with existing quality processes and measurement plans. For procurement and process planning, the gauge is supplied as a Go check instrument appropriate for acceptance testing and routine control; technical guidance can be provided to align the gauge with established inspection intervals and storage recommendations. Contact Metav Werkzeuge for tailored application advice and to procure the Metav IndustryLine M80 x 6.0 Go plug gauge with calibration certificate from Emmerich. Technical Data Article number: M315.580.A GTIN: 4054469155548 Tariff number: 90173000 Thread size: M80 x 6.0 Direction: right-hand Condition: Go gauge Measurements & Standards Weight: 2 kg Tolerance class: 6H Standard: DIN 13 Materials & Delivery Material: gauge steel, hardened Delivery: calibration certificate included FAQ What thread form and size does this gauge check? The gauge checks a metric ISO fine internal thread of size M80 x 6.0, produced in right‑hand form and intended for acceptance verification. Is a calibration document supplied with the gauge? Yes, the plug gauge is delivered with a calibration certificate, providing traceability suitable for quality records and audits. Which standard and tolerance class apply to this gauge? Manufactured to DIN 13 with a tolerance class of 6H, matching common specifications for metric internal threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure repeatable go/no‑go checks over prolonged use. How is the Go feature used in a workshop inspection routine? The Go end establishes whether an internal thread meets the minimum acceptance profile; successful engagement indicates conformity, enabling immediate pass decisions during incoming or in‑process inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x6 Thread Go/No-Go Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of fast, unambiguous pass/fail inspection combined with hardened gauge steel construction and traceable calibration to keep thread production within specification; order directly via Metav Werkzeuge or consult our specialists for application advice. No‑go thread plug gauge M80 x 6.0 — right‑hand (Metav IndustryLine) No‑go thread plug gauge M80 x 6.0 (metric ISO fine thread), right‑hand designed for quick verification of internal threads in production and incoming inspection Hardened gauge steel construction For metric ISO fine thread M80×6 Compliant with DIN 13, 6H Delivered with calibration certificate Fast pass/fail checks that protect production flow A no‑go thread plug gauge provides immediate, unequivocal results for go/no‑go testing: if the gauge does not enter the threaded bore, the mating thread meets the upper tolerance limit. This direct method reduces measurement time and decision latency on the shop floor, helping to avoid rework and minimise downtime. The M80 x 6.0 designation corresponds to the metric fine thread size and pitch, offering a clear reference for engineers and quality teams when establishing inspection routines. Durable construction for reproducible measurements Manufactured from hardened gauge steel, the gauge resists wear and maintains geometry over extended use, which preserves the reliability of pass/fail decisions. The DIN 13, 6H specification ensures conformity with common ISO metric thread standards, simplifying documentation and audits. Robust material selection combined with precise machining reduces the influence of handling on results, so inspection staff can rely on consistent performance across production runs. Traceable calibration for audit readiness The tool is supplied with a calibration certificate, confirming that the gauge has been checked against appropriate references before delivery. This documentation supports traceability in quality systems and aids compliance during internal or external audits. Calibration at delivery ensures the gauge is match‑ready for sampling plans and acceptance criteria, creating confidence that first‑article inspections and routine checks rest on a verified reference. Simple integration into existing quality processes Because the gauge is a dedicated no‑go limit instrument, it requires no interpretation beyond the basic pass/fail rule, which keeps operator training straightforward and short. The compact, single‑purpose design streamlines inspection stations and is suitable for use in incoming goods inspection, in‑process control, and final dimensional checks. The physical limit check complements dimensional measurement tools and helps to speed up throughput where rapid decisions are essential. For reliable thread verification from Metav IndustryLine, contact Metav Werkzeuge today to discuss suitability for M80 applications or to arrange procurement and delivery via Metav Werkzeuge GmbH, the local precision partner. Technical Data Article number: M315.680.A GTIN: 4054469155678 Tariff number: 90173000 Data Thread size: M80 × 6.0 Weight: 2 kg Standard: DIN 13, 6H Orientation: right‑hand Special features Material: gauge steel, hardened Type: no‑go thread plug gauge (reject gauge) Supplied with calibration certificate Category: Thread gauges / Gauges FAQ What does "no‑go" mean for thread inspection? A no‑go plug gauge is a limit instrument that must not enter a correctly produced internal thread; the no‑go thread plug gauge M80 x 6.0 checks that the thread does not exceed the maximum material condition. Is the gauge ready for use on delivery? Yes, the gauge is delivered with a calibration certificate, so the Metav IndustryLine no‑go plug can be used immediately in inspection routines with documented traceability. Which standard does this gauge comply with? The instrument is manufactured to DIN 13, 6H, matching the common ISO metric fine thread tolerance class for controlled acceptance testing. Can this gauge be used for audit evidence? Yes, the supplied calibration certificate supports audit trails and quality documentation when the no‑go thread plug gauge M80 x 6.0 is used as a reference in sampling plans. How long will the gauge remain accurate in daily use? Durability depends on handling and frequency of use; the hardened gauge steel construction enhances wear resistance, extending the period between recalibrations and preserving repeatable pass/fail outcomes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80x6 Thread Go/No-Go Ring Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Combine repeatable GO/NO‑GO inspection with hardened gauge steel and a traceable calibration certificate to keep thread control consistent and production losses low. Order the NO‑GO ring directly via Metav Werkzeuge or consult our specialists for quick integration into incoming inspection and process control. Thread Ring Gauge NO‑GO M80×6.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread Ring Gauge NO‑GO M80×6.0 is a right‑hand inspection ring gauge designed for swift pass/fail checks of metric ISO fine threads in production and quality control environments. NO‑GO thread ring for M80×6 To DIN 13, tolerance 6g Hardened gauge steel with calibration certificate Reliable pass/fail control for metric fine threads A dedicated NO‑GO ring provides an immediate binary check that prevents out‑of‑tolerance components from advancing in the process. The gauge is manufactured for the M80×6.0 metric ISO fine thread and complies with DIN 13 at tolerance class 6g, so inspection staff obtain a clear verdict without lengthy set‑ups. This method reduces downstream rework and supports consistent assembly performance by intercepting faulty internal threads before mating operations commence. Durable construction with documented traceability Made from hardened gauge steel, the ring withstands repeated use in workshop and shop‑floor conditions while preserving its critical form and thread profile. The tool is supplied with a calibration certificate, ensuring traceability of measurement results and supporting quality records. Traceable calibration simplifies audits and helps to demonstrate control of inspection equipment in conformity assessments, enabling confident decisions in production control and supplier inspection. Practical fit for production and quality workflows Designed as a right‑hand NO‑GO ring, this gauge suits high‑volume checks as well as spot inspections during incoming control. The compact, robust geometry ensures easy handling on the shop floor and rapid tactile verification without auxiliary measuring equipment. For customers seeking a matched inspection set, Metav IndustryLine can advise on complementary GO gauges and inspection workflows to create a coherent QC routine that balances speed and reproducibility. Request technical matching or a supply consultation from Metav Werkzeuge to integrate the NO‑GO M80×6.0 ring gauge into existing inspection routines — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.880.A GTIN: 4054469155937 Designation: Thread ring gauge NO‑GO M80×6.0 Facts Size: M80×6 Weight: 2 kg Tariff number: 90173000 Special features Type: NO‑GO (reject) ring gauge Thread: metric ISO fine thread, right‑hand Material: gauge steel, hardened Standard: DIN 13, tolerance class 6g Supplied with calibration certificate Category: Gauge / Inspection tool FAQ What does NO‑GO mean for this ring gauge? NO‑GO denotes a reject gauge that must not fit correctly into a conforming internal thread; the Thread Ring Gauge NO‑GO M80×6.0 is used to confirm that a thread is not oversized beyond the permitted tolerance. Is a calibration certificate supplied with the gauge? Yes, the ring gauge is delivered with a calibration certificate to document traceability and measurement accuracy for the M80×6.0 NO‑GO ring. Which standard and tolerance class apply to this gauge? The gauge is made to DIN 13 with tolerance class 6g, appropriate for metric ISO fine thread inspection. Can this gauge be used for left‑hand threads? No, this specific tool is a right‑hand NO‑GO ring gauge and is intended only for right‑hand metric ISO fine threads; select the appropriate handedness for left‑hand threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80×1.5 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of hardened gauge steel, DIN‑certified thread form and an included calibration certificate for repeatable acceptance testing; order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. M80 × 1.5 Thread Plug Gauge (go) — right‑hand, metric ISO fine thread by Metav IndustryLine The M80 × 1.5 Thread Plug Gauge (go) is a right‑hand plug gauge for verifying metric ISO fine threads in production, incoming inspection and calibration labs. Calibrated with certificate included Hardened gauge steel construction Metric ISO fine thread M80 × 1.5 Right‑hand, DIN 13, 6H tolerance Reliable pass/fail inspection that fits the workflow The plug gauge provides a fast and unambiguous go/no‑go check for thread acceptance, reducing subjective interpretation during serial inspection. Built to the DIN 13 standard with a 6H tolerance class, the gauge ensures interchangeability with ISO‑conforming parts and supports quality plans that demand objective criteria. Using a purpose‑made thread gauge speeds up control loops and decreases machine downtime by catching thread errors before assembly. Robust construction for shop‑floor durability Manufactured from hardened gauge steel, the device resists wear from repetitive engagement and retains its form over prolonged use. The material choice and heat treatment deliver stable contact geometry, which in turn maintains measurement consistency across production batches. The compact, single‑piece design simplifies handling while the mass of approximately 2 kg provides tactile stability during manual checks, so routine inspections remain both efficient and repeatable. Traceable calibration for documented conformity Delivered with a calibration certificate, the gauge arrives ready for documented quality checks and traceable measurement records. The certificate confirms conformity to specified inspection limits and supports internal audits and supplier qualification procedures. Where records are required for accredited quality systems, the supplied documentation reduces follow‑up work and clarifies the reference condition of the gauge at the point of handover. Select Metav IndustryLine’s calibrated M80 thread plug gauge for dependable thread verification — contact Metav Werkzeuge in Emmerich for ordering specifics or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.580.6 GTIN: 4054469152172 Manufacturer: Metav IndustryLine Facts Thread size: M80 × 1.5 Tolerance / standard: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Thread direction: right‑hand Delivered with calibration certificate Category: thread plug gauge (go) FAQ What thread form and tolerance does this gauge check? The M80 × 1.5 Thread Plug Gauge (go) checks metric ISO fine threads manufactured to DIN 13 with a 6H tolerance class, suitable for standardised acceptance tests. Is a calibration certificate supplied with the gauge? Yes — the gauge is supplied with a calibration certificate that documents the inspected condition and supports traceability for quality systems. What material is the gauge made from and why? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability, which preserves thread geometry under repeated use. Can this gauge be used for shop‑floor sampling in serial production? Yes — the plug gauge is designed for rapid pass/fail checks at the production line and in incoming inspection to reduce subjective evaluations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80×1.5 Thread Ring Gauge, Go, Metric Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge steel construction, conformity to DIN 13 (6g) and an included calibration certificate, this GO thread ring gauge delivers reliable, repeatable pass/fail verification for metric ISO fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go Thread Ring Gauge M80 x 1.5 – ISO fine thread, right-hand (Metav IndustryLine) The Go Thread Ring Gauge M80 x 1.5 is a hardened gauge-steel ring designed for quick verification of right‑hand metric ISO fine threads in production and incoming‑inspection environments. Calibrated with certificate included Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g GO gauge for immediate pass/fail inspection Ensure fast, compliant thread inspection on the shop floor The GO ring offers a straightforward, time‑saving check that integrates with routine quality procedures. The hardened gauge steel body resists wear, preserving the measuring profile over repeated use; this reduces rework and inspection downtime. Traceability is supported by the supplied calibration certificate, which documents the gauge's status at delivery and simplifies audit trails in manufacturing and quality control. Designed for accuracy and standard conformity Engineered to DIN 13 with the 6g tolerance class, the ring provides dimensional assurance for metric ISO fine threads with a nominal size of M80 x 1.5. The GO characteristic confirms that a threaded part falls within the acceptable maximum material condition quickly and unambiguously. For production environments where throughput and precision matter, the gauge serves as a reliable first‑line control that reduces the need for lengthy measurement sequences and helps maintain consistent assembly quality. Practical benefits for inspection routines and quality systems Compact and robust, the ring is ready for direct use in shop inspection benches and gauge sets. The right‑hand design suits standard thread directions and the GO designation permits immediate pass/fail decisions without interpretation. Supplied calibrated, the gauge supports documented quality systems and helps to ensure parts meet the intended fit class, thus lowering scrap rates and increasing customer confidence in delivered components. For assured process reliability with Metav IndustryLine's calibrated Go Thread Ring Gauge M80 x 1.5, contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.780.6 GTIN: 4054469152653 Tariff number: 90173000 Weight: 2 kg Size: M80 x 1.5 Standard: DIN 13, 6g Numbers / Core technical data Nominal thread: M80 x 1.5 Tolerance class: 6g Weight: 2 kg GTIN numeric code: 4054469152653 Special features / Design Material: gauge steel, hardened Calibration: calibration certificate included Gauge type: GO (GUT) Thread form: metric ISO fine thread, right‑hand FAQ What does the GO designation indicate for this ring gauge? The GO designation means the ring is a pass gauge: a mating thread that enters the Go Thread Ring Gauge M80 x 1.5 is within the permitted maximum material condition and is acceptable for the intended fit. Is the gauge supplied with calibration documentation? Yes, the gauge is delivered with a calibration certificate, confirming its measured condition at the time of dispatch and supporting traceability in quality records. Which standard and tolerance class does the gauge follow? The ring adheres to DIN 13 with a tolerance class of 6g, suitable for metric ISO fine threads in standard industrial applications. Can this ring gauge be used for production inspection? The GO thread ring is intended for quick production and incoming‑inspection checks; its hardened construction supports repeated use in routine inspection tasks. What is the material and durability of the gauge? Manufactured from hardened gauge steel, the ring is designed to resist wear and maintain profile fidelity over repeated checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80×2 Thread Go/No-Go Plug Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calib. Certificate Included - Metav IndustryLine
Take advantage of a robust inspection tool that combines M80 x 2.0 thread verification, hardened gauge steel construction and a supplied calibration certificate for reliable go/no‑go decisions on the shop floor — order directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge (no‑go) M80 x 2.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug gauge M80 x 2.0 is a right‑hand, no‑go inspection plug intended for quick verification of metric ISO fine threads to DIN 13, 6H, designed for industrial quality control in production and incoming inspection. Hardened gauge steel for long service life Designed for M80 x 2.0 metric ISO fine threads Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Fast, dependable pass/fail inspection to speed production control A dedicated no‑go plug gauge offers an immediate, unambiguous check that a thread exceeds permissible limits. Made for routine acceptance testing, this gauge delivers clear go/no‑go results without interpretation, reducing inspection time and keeping throughput high. The combination of M80 x 2.0 sizing and conformity to DIN 13 ensures compatibility with common metric ISO fine‑thread specifications, making the tool a practical choice for manufacturing environments where speed and decisiveness are essential. Robust materials and geometry for repeatable results Constructed from hardened gauge steel, the plug presents a stable contact surface that resists wear and preserves nominal dimensions over extended use. The solid build minimises deformation under handling, which translates into consistent measurement behaviour and fewer false rejects. At approximately 2 kg, the gauge feels substantial in hand yet remains manageable for bench and workstation use, supporting repeatable quality checks across shifts with minimal recalibration frequency. Traceability and audit readiness for quality systems The gauge is delivered with a calibration certificate, supporting traceability within quality management systems and documentation for audits. Its clear designation as a no‑go inspection tool simplifies process instructions and decision rules on control plans. Labelling and identifiers such as GTIN and SKU facilitate inventory management and unambiguous assignment in inspection protocols, so the plug can be integrated easily into routine sampling plans or final inspection stages. Contact Metav Werkzeuge for precise advice on integrating the Metav IndustryLine M80 x 2.0 no‑go plug gauge into existing inspection workflows — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M315.680.7 GTIN: 4054469153513 Label: Thread plug gauge, no‑go, right‑hand Facts Thread size: M80 x 2.0 Standard / tolerance: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Calibration: supplied with calibration certificate Orientation: right‑hand thread Application: inspection of metric ISO fine threads Designation: reject (no‑go) plug gauge FAQ What is the intended use of this plug gauge? The thread plug gauge M80 x 2.0 is a no‑go inspection plug from Metav IndustryLine designed to check whether M80 x 2.0 metric ISO fine threads exceed acceptable dimensions; it gives a clear pass/fail result for quality control. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate, enabling traceability and supporting audit documentation for the Metav IndustryLine no‑go plug gauge (SKU M315.680.7). Which standard does the gauge comply with? The inspection plug is manufactured to meet DIN 13 requirements with a 6H tolerance class for metric ISO fine threads, suitable for use in industrial inspection routines. Can this gauge be used for left‑hand threads? No, this item is specified as a right‑hand no‑go plug; left‑hand applications require the corresponding left‑hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M80×6 Thread GO Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 (6g) tolerance and an M80 x 6 thread form for reliable inspection of metric fine threads; supplied with a calibration certificate to ensure traceability. Order the gauge directly via Metav Werkzeuge or consult the Metav team for specification matching and delivery. Thread ring gauge GUT M80 x 6.0 — hardened gauge steel, DIN 13 (6g) (Metav IndustryLine) The Thread ring gauge GUT M80 x 6.0 is a hardened precision Go ring designed for verification of right‑hand metric ISO fine external threads in production and quality control environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g For M80 x 6 metric ISO fine threads Supplied with calibration certificate Reliable in-line acceptance testing for fine threads The ring serves as a Go gauge for rapid, repeatable acceptance checks on externally threaded parts, offering a straightforward pass/fail decision during assembly or final inspection. Machined to the M80 x 6 profile and finished from hardened gauge steel, the ring maintains form stability under repeated use and resists wear that would otherwise degrade measurement certainty. Compliance with DIN 13 (6g) provides a recognised reference for fit and interchangeability, reducing ambiguity in batch acceptance and supporting lean inspection processes. Traceability and production security that reduces rework Delivered with a calibration certificate, the gauge supplies documented traceability suitable for internal quality systems and audits. The certificate accompanies the hardened ring, allowing integration into calibration schedules and inventory controls without delay. By embedding this level of certainty into the inspection step, production lines benefit from fewer stoppages and a lowered risk of downstream rework — a clear efficiency argument for production planners and quality engineers alike. Robust design for workshop and shop‑floor use The robust construction and defined right‑hand geometry make the ring suitable for routine use in workshops and metrology benches where quick verification of metric ISO fine threads is required. The compact, solid form eases handling and supports reproducible seating on screw threads, while the durable material choice minimises profile wear. This combination ensures long service life and preserves the Go criterion central to acceptance testing, helping maintain consistent quality across production runs. Contact Metav Werkzeuge for tailored advice on thread gauging and to arrange delivery from Emmerich with full calibration documentation Technical data Article number: M315.780.A GTIN: 4054469155807 Eclass: 21170214 Tariff number: 90173000 Label: Gewinde-Lehrring GUT M 80 X 6,0 für metrisches ISO-Feingewinde, rechts Manufacturer: Metav IndustryLine Numbers / Core technical data Thread size: M80 x 6.0 Tolerance class: 6g (DIN 13) Weight: 2 kg Special features / Versions Material: gauge steel, hardened Right‑hand metric ISO fine thread Type: Go gauge (GUT) Supplied with calibration certificate (mit Kalibrierschein) FAQ What is the purpose of this ring gauge? The ring gauge is intended for acceptance testing of external threads; the Go ring confirms whether an M80 x 6 external thread meets the DIN 13 (6g) specification. Is the gauge delivered with traceable calibration? Yes, the ring is supplied with a calibration certificate so the gauge can be integrated into quality systems with documented traceability. Which materials is the gauge made from and how durable is it? The gauge is manufactured from hardened gauge steel, chosen for dimensional stability and wear resistance under repeated inspection cycles. Can the ring gauge be used for left‑hand threads? This specific unit is manufactured for right‑hand metric ISO fine threads and is not suitable for left‑hand thread inspection. How does DIN 13 (6g) affect acceptance criteria? DIN 13 with tolerance class 6g defines the allowable limits and fit for the external thread; the Go gauge is machined to match these limits for a clear pass/fail check. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M82x1.5 Thread Go Gauge For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precision inspection with a robust no‑go plug gauge: hardened gauge steel construction, conformity to DIN 13, 6H, and delivery with a calibration certificate ensure reliable pass/fail control for metric fine threads. Order the gauge directly via Metav Werkzeuge or consult Metav’s specialists for application advice. M82 x 1.5 No‑Go Thread Plug Gauge — Metric ISO fine thread, right‑hand (Metav IndustryLine) The M82 x 1.5 No‑Go Thread Plug Gauge is designed for quick, unambiguous inspection of metric ISO fine threads in production and incoming inspection environments; it checks the reject limit for right‑hand threaded components. Hardened gauge steel construction Conforms to DIN 13, 6H tolerance Supplied with calibration certificate Right‑hand metric fine thread M82×1.5 Faster, traceable pass/fail inspection that protects production flow A dedicated no‑go plug gauge provides an immediate pass/fail decision at the inspection point, reducing throughput interruptions and preventing assembly of out‑of‑tolerance parts. Supplied with a calibration certificate, the gauge delivers documented traceability suitable for quality records and audits. When the reject limit is detected by the gauge, corrective actions can be initiated immediately, which simplifies process control and reduces scrap rates while maintaining consistent product quality. Durable construction and standardised tolerances for repeatable results Manufactured from hardened gauge steel, the gauge resists wear under repeated use and retains measuring geometry critical for long service life. Conformity to DIN 13, 6H defines the tolerance class for the mating thread and ensures compatibility with metric ISO fine thread specifications. The right‑hand orientation is produced to match standard thread direction; the robust material choice and heat treatment keep the functional surfaces stable, so dimensional checks remain repeatable across many cycles. Practical use cases: where the gauge brings value on the shop floor This plug gauge is suitable for incoming inspection, first article checks and in‑process control of threaded components where a clear reject indicator is required. The simple mechanical design makes it easy to use at benches or inspection stations without auxiliary equipment; measurement is immediate and objective, supporting lean inspection routines. The compact nature of the tool and its defined purpose help integrate it into existing quality workflows, making the acceptance decision faster and less dependent on operator interpretation. For detailed application guidance or to request the M82 x 1.5 plug gauge from Metav IndustryLine, contact Metav Werkzeuge for technical assistance and availability from Emmerich. Technical data Article number: M315.682.6 GTIN: 4054469152424 Tariff number: 90173000 Net weight: 2 kg Facts Thread size: M82 x 1.5 Tolerance class: 6H (DIN 13) Orientation: right‑hand thread Special features Material: hardened gauge steel Type: No‑go (reject) plug gauge Supplied with calibration certificate Category: Gauges / Thread inspection FAQ What does the M82 x 1.5 no‑go plug gauge verify? The gauge checks the reject limit for an M82 x 1.5 metric ISO fine thread; if the no‑go gauge enters the thread, the part is out of tolerance. Is a calibration certificate included with the gauge? Yes, the M82 x 1.5 gauge is supplied with a calibration certificate, providing traceable documentation for quality records. Which standard governs the thread tolerances for this gauge? The gauge is manufactured in accordance with DIN 13, tolerance class 6H, matching the metric ISO fine thread specification. Can the plug gauge be used for left‑hand threads? No, this specific gauge is produced for right‑hand threads; left‑hand checks require a dedicated left‑hand gauge. How should the no‑go plug gauge be stored to maintain accuracy? Store the gauge in a dry, stable environment and avoid mechanical shocks; protective casing is recommended during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M82x1.5 Thread Go Plug Gauge Metric Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
A hardened gauge‑steel construction and conformity to DIN 13, 6H provide reliable go-thread verification for M82 x 1.5 threads; supplied with a calibration certificate for traceable results. Order this inspection gauge directly via Metav Werkzeuge or consult our advisors for application advice. Thread plug gauge GUT M82 x 1.5 (Go) — metric ISO fine thread, right‑hand (hardened gauge steel, DIN 13, 6H) The Thread plug gauge GUT M82 x 1.5 is a right‑hand Go gauge for fast verification of metric ISO fine threads in production and inspection environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Calibrated with certificate included Right‑hand M82 x 1.5 Go thread plug Consistent, standards‑based go/no‑go verification The threaded plug serves exclusively as a Go inspection tool to confirm that internal threads meet the minimum acceptance criteria defined for metric fine threads. Manufactured to DIN 13 with a 6H tolerance class, the gauge gives an objective pass/fail check that reduces interpretation errors during quality control. The combination of standard conformity and the plug’s precise M82 x 1.5 profile makes it suitable for routine in‑line checks where repeatability and documented traceability are required. Durable design for high throughput inspection Crafted from hardened gauge steel, this plug gauge resists wear across repeated engagement cycles, preserving dimensional integrity and reducing the need for frequent replacement. The solid construction keeps measurement deviation low under regular handling, enabling stable inspection rates on production lines and in inspection benches. Supplied with a calibration certificate, the gauge arrives ready for use in documented quality systems and supports consistent acceptance decisions over time. Seamless integration into quality workflows As a purpose‑built Go plug, the device streamlines thread acceptance testing by eliminating subjective gauging steps: a correct fit confirms a manufactured thread is within specification, while lack of fit identifies non‑conforming parts early. The right‑hand orientation and metric ISO fine thread profile allow straightforward interchangeability with standard components and fixtures. Where documented traceability is required for audits or process control, the delivered calibration paperwork supports inspection records and ongoing compliance. For availability, technical clarification or to request tailored advice on the Metav IndustryLine thread plug gauge, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on suitability and delivery. Technical Data Article number: M315.582.6 GTIN: 4054469152189 Manufacturer: Metav IndustryLine Designation: Thread plug gauge, Go (plug), right‑hand Facts Thread size: M82 x 1.5 Standard / tolerance: DIN 13, 6H Weight: 2 kg Tariff code: 90173000 Special features Material: hardened gauge steel Calibration certificate included Suitable for metric ISO fine threads Right‑hand Go gauge Category: Gauges / Plug gauges FAQ What is the primary purpose of this plug gauge? The thread plug gauge GUT M82 x 1.5 is designed to verify internal metric ISO fine threads; as a Go gauge it confirms that the thread meets minimum dimensional requirements per DIN 13, 6H. Is the gauge supplied with calibration documentation? Yes, the tool is supplied with a calibration certificate that documents the inspection results and traceability for the Metav IndustryLine M315.582.6 plug gauge. Which thread tolerance does this plug check? This Go plug checks for compliance with the 6H tolerance class according to DIN 13, ensuring compatibility with standard metric fine threaded components. Can the gauge be used in a production environment? The robust, hardened gauge‑steel construction and standardised profile make it suitable for repetitive checks in production and workshop inspection routines. How should the plug gauge be handled to preserve accuracy? Handle the gauge carefully to avoid shock or contamination, keep it clean and dry, and store it with protective packaging after use to maintain dimensional stability and calibration validity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M82x1.5 Thread Go Ring For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel, DIN 13 6g, With Calibration Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel design and a delivered calibration certificate for reliable pass/fail inspection of metric fine threads; combine standardised tolerance class verification with straightforward handling to keep production quality on target. Order directly via Metav Werkzeuge or consult our specialists for specification support. Thread No‑Go Ring Gauge M82×1.5 — hardened gauge steel, DIN 13 (6g) — Metav IndustryLine A no‑go thread ring gauge (M82×1.5) for right‑hand metric ISO fine threads, designed for quick verification of out‑of‑tolerance threads in production and incoming inspection. Hardened gauge steel construction Calibrated with certificate included DIN 13 tolerance class 6g Right‑hand metric thread M82×1.5 Fast, standardised verification that protects production quality A dedicated no‑go ring gauge shortens inspection cycles by delivering an unambiguous pass/fail result for each threaded part. Built to DIN 13 and the 6g tolerance band, the gauge enables rapid verification of fine metric threads without the need for time‑consuming measurements. The hardened gauge steel body resists wear during repeated use, which preserves the verification limit and reduces the frequency of replacement. For production environments seeking predictable throughput, the reject‑or‑accept logic of a no‑go instrument minimises interpretation errors and helps to reduce downstream rework. Traceable calibration for audit‑grade measurement processes The gauge is supplied with a calibration certificate, providing documented traceability and supporting quality systems and audits. Calibration evidence simplifies supplier acceptance and internal quality records, ensuring that results from the ring are defensible during inspections. Where measurement traceability is required, this documentation removes uncertainty and contributes to consistent quality decisions across batches. The combination of a hardened gauge and certified calibration supports a robust inspection routine that integrates smoothly into existing quality workflows. Intuitive handling and compatibility with standard inspection routines The compact ring design enables ergonomic handling on the shop floor and in the inspection bay. As a right‑hand metric thread gauge for M82×1.5, it matches common fine‑pitch applications used in mechanical and assembly work. The solid construction and clear go/no‑go function accelerate decision making at the control point, which in turn helps to reduce bottlenecks at goods‑in or final inspection. Using a purpose‑built ring gauge streamlines training — operators require minimal instruction to apply a simple conformity check reliably. Reliability that reduces production risk Employing a dedicated no‑go gauge as part of the inspection plan improves first‑pass yield by catching out‑of‑tolerance threads before components proceed to assembly. The hardened steel construction and standardised tolerance class ensure the limit remains stable over extended use; where repeatability is essential, the gauge supports consistent quality outcomes and helps avoid costly assembly failures. For buyers seeking a pragmatic, standards‑based approach to thread inspection, this instrument is a practical tool that contributes directly to process reliability and lowered scrap rates. Contact Metav Werkzeuge for application advice or to arrange supply of the Metav IndustryLine thread no‑go ring gauge with calibration certificate Technical data Article number: M315.882.6 GTIN: 4054469152905 Tariff code: 90173000 Weight: 2 kg SKU: M315.882.6 Core specifications Thread: M82×1.5 Tolerance class: 6g Standard: DIN 13 Orientation: right‑hand thread Weight: 2 kg Materials and features Material: gauge steel, hardened Type: no‑go ring gauge for metric ISO fine thread Delivery: includes calibration certificate Category: Lehren / Messstifte FAQ What is the intended use of this ring gauge? The no‑go ring gauge is intended for pass/fail inspection of M82×1.5 right‑hand metric ISO fine threads to confirm parts that exceed the allowable tolerance. Does the gauge come with calibration documentation? Yes, the Metav IndustryLine ring gauge is supplied with a calibration certificate so inspection results can be recorded and traced for quality audits. Which standard and tolerance are applied to this gauge? The gauge conforms to DIN 13 and is produced for the 6g tolerance class, matching typical metric fine‑thread acceptance criteria. Is the material suitable for high‑use shop‑floor inspection? Constructed from hardened gauge steel, the ring gauge is designed for durability under frequent handling and repeated verification cycles. Can this ring be used for left‑hand threads? This specific instrument is a right‑hand thread no‑go gauge for M82×1.5; left‑hand variants must be ordered separately where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M82x1.5 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6g, Calibrated - Metav IndustryLine
Benefit from the combination of hardened gauge steel, conformity to DIN 13 (6g) and a supplied calibration certificate for traceable acceptance checks; these characteristics support reliable in‑process control and quality assurance. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge GUT M82 x 1.5 — Go, metric ISO fine thread (right-hand) | Metav IndustryLine Thread ring gauge GUT M82 x 1.5 is a precision Go ring designed to verify metric ISO fine threads in production and inspection settings, suitable for dimensional control of components and assemblies. Hardened gauge steel, DIN 13 compliant Calibrated delivery with certificate included Right-hand metric fine thread M82 x 1.5 Go tolerance class for acceptance checks Precision that supports repeatable quality control The Go ring is a purpose-built acceptance gauge for verifying external threads quickly and unambiguously. Made from hardened gauge steel, the tool resists wear and maintains form so that repeated checks do not introduce measurement drift. Compliance with DIN 13 (6g) provides a clear normative basis for pass/fail decisions, while the simple Go/No-Go principle speeds up shop‑floor inspection without sacrificing traceability. One measurable benefit is the avoidance of false acceptance: by using a dedicated Go ring, machining and finishing processes can be validated at the point of production, reducing downstream rework and non‑conformances. Traceable calibration for documented inspection routines Delivered with a calibration certificate, this ring gauge ensures that each inspection step can be documented in a quality dossier. The supplied certificate records the gauge condition at the time of dispatch, enabling integration into standard inspection plans and internal audits. For regulated manufacturing where recordability matters, the presence of a calibration document simplifies conformity checks and supports audit trails. The thread specification M82 x 1.5 and the corresponding certificate create an unequivocal reference for dimensional control and lot acceptance. Robust design for continuous workshop use Constructed from hardened gauge material, the ring provides long service life under regular usage and preserves the functional gauging edge. The right‑hand configuration fits standard threaded parts and fixtures used across mechanical and assembly operations. At approximately 2 kg, the gauge combines sufficient mass for stable handling with compact dimensions for ergonomic use at the inspection bench. For production engineers and quality managers, the proven construction reduces the need for frequent replacement and supports a consistent measuring regime across shift teams. For traceable, workshop-ready thread inspection, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine thread ring gauge M82 x 1.5 or for technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: M315.782.6 GTIN: 4054469152660 Thread size: M82 x 1.5 Material: Gauge steel, hardened Standard: DIN 13 (6g) Weight: 2 kg Tariff number: 90173000 Facts Nominal diameter: 82 mm Thread pitch: 1.5 mm ECLASS: 21170214 Special features Right-hand metric fine thread Go (acceptance) ring Delivered with calibration certificate Intended for metric ISO fine threads Hardened gauge steel for wear resistance FAQ What is the primary use of this gauge? The Thread ring gauge GUT M82 x 1.5 from Metav IndustryLine is used to perform Go acceptance checks on external metric ISO fine threads to confirm conformity with the specified tolerance class. Does the gauge arrive calibrated? Yes, the ring gauge is supplied with a calibration certificate that documents the measured condition at dispatch, facilitating traceability in inspection records. Which standard and tolerance class apply? The gauge follows DIN 13 (6g), making it suitable for checking parts manufactured to that metric fine‑thread tolerance. What material is the ring made from and why does that matter? Manufactured from hardened gauge steel, the ring maintains dimensional stability and resists wear, which preserves the integrity of routine acceptance checks. How is the Go/No-Go principle applied with this ring? A part that fully engages the Go ring within the design limits is accepted; failure to engage indicates that the external thread does not meet the required tolerance and should be rejected or reworked. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M85x1.5 Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of a hardened gauge steel construction, traceable calibration certificate, and conformity to DIN 13, 6H for reliable acceptance testing of fine internal threads; Order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed Thread plug gauge GUT M85 x 1.5 — Metric ISO fine thread gauge, right-hand (Metav IndustryLine) The Thread plug gauge GUT M85 x 1.5 is a hardened inspection gauge for verifying metric ISO fine internal threads to DIN 13, 6H; suitable for routine quality checks in production and incoming inspection Calibrated with certificate Hardened gauge steel construction Conforms to DIN 13, 6H Metric fine thread M85 x 1.5 right-hand Ensuring consistent acceptance testing for fine threads The GUT-designated plug serves as a straightforward acceptance tool for internal threads, offering a rapid GO check that integrates with standard quality workflows. Built from hardened gauge steel, the master plug resists wear and preserves the reference profile over extended use, which reduces measurement drift and repeat failures. By applying a simple tactile check with a calibrated master, production lines can reduce non-conforming parts and streamline first-article inspection, benefitting both process stability and throughput. Traceable calibration and documented conformity Delivered with calibration certificate, the gauge provides documented traceability for audit and quality management purposes. The calibration confirms that the nominal profile and pitch conform to DIN 13 with the specified tolerance class 6H, enabling audit-ready records and consistent acceptance criteria. This traceability supports supplier control and internal quality systems, ensuring decisions about part acceptance are based on verifiable measurement evidence rather than subjective judgement. Robust design for workshop and inspection environments Manufactured from gauge steel, hardened, the plug offers mechanical stability and resistance to surface damage during routine handling. The right-hand M85 x 1.5 geometry is machined to preserve thread form and ensure reliable engagement with mating internal threads; tactile feedback on seating is immediate and unambiguous. Weight and bulk are balanced for workshop use, allowing quick transfer between inspection benches and production cells while maintaining the reference form required for repetitive GO testing. Secure traceable measurement with Metav IndustryLine’s calibrated M85 thread plug gauge from Metav Werkzeuge — contact our consultants for specification matching and procurement support Technical details Article number: M315.585.6 GTIN: 4054469152196 Tariff number: 90173000 Core data Thread nominal: M85 x 1.5 Pitch: 1.5 mm Weight: 2 kg eCl@ss: 21170228 Special features Material: hardened gauge steel Standard: DIN 13, 6H Right-hand thread Delivered with calibration certificate Designation: GUT (acceptance/GO gauge) Manufacturer: Metav IndustryLine FAQ What is the primary purpose of this plug gauge? The Thread plug gauge GUT M85 x 1.5 is intended for GO acceptance testing of metric ISO fine internal threads and provides a rapid, repeatable check in production and inspection. Is the gauge supplied with calibration documentation? Yes, the Metav IndustryLine plug gauge is supplied with a calibration certificate, providing traceable measurement evidence for quality records. Which standard does the gauge comply with? The plug is produced to the requirements of DIN 13 with tolerance class 6H, ensuring compatibility with metric ISO fine thread specifications. What material is the gauge made from and why is that important? The gauge is manufactured from hardened gauge steel; this ensures dimensional stability and wear resistance, preserving the reference form during repeated inspections. Can this gauge be used for left-hand threads? This specific item is a right-hand M85 x 1.5 plug gauge; left-hand variants would be offered separately if required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M85x1.5 Thread Plug Gauge Three-Point, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise rejection control and durable construction for reliable thread inspection. The combination of a hardened gauge steel body and an included calibration certificate ensures inspection decisions are reproducible and auditable. Order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. No‑go Thread Plug Gauge M85 × 1.5 — Right‑hand, hardened gauge steel (Metav IndustryLine) The No‑go Thread Plug Gauge M85 × 1.5 is a right‑hand plug gauge designed to verify metric ISO fine threads to DIN 13 with tolerance class 6H, intended for workshop and production inspection routines No‑go plug gauge for M85 × 1.5 Hardened gauge steel construction DIN 13 specification, tolerance class 6H Includes calibration certificate Reject control that protects production quality A dedicated no‑go plug gauge provides an immediate, unambiguous check for out‑of‑tolerance internal threads. By defining a rejection limit for the M85 × 1.5 metric ISO fine thread, the gauge prevents the use of defective components and reduces costly rework and machine downtime. The design follows DIN 13 with 6H tolerance, offering compatibility with standard thread specifications used across industry, which simplifies inspection criteria and speeds up decision making on the shop floor. Durable materials and geometry for repeatable results Manufactured from hardened gauge steel, the gauge resists wear from repeated engagement and retains dimensional stability over long inspection cycles. The right‑hand orientation and the precise flank geometry ensure consistent contact with the internal thread form, while the robust construction supports frequent handling without loss of reference. Where traceability matters, the supplied calibration certificate documents the inspection status at delivery and supports quality‑management records. Practical integration into inspection workflows As a purpose‑built inspection tool, this thread gauge fits into established control plans and first‑article inspections. The simple go/no‑go principle enables fast throughput in assembly or incoming goods checks, while the included certification aids audit readiness. Using a dedicated plug gauge for fine metric threads improves reproducibility of acceptance criteria and complements measuring instruments and process controls in a comprehensive quality system. For application support or to place an order for the Metav IndustryLine no‑go thread plug gauge, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert advice and prompt supply Technical data Article number: M315.685.6 GTIN: 4054469152431 Weight: 2 kg Material: Hardened gauge steel Thread size: M85 × 1.5 Standard: DIN 13, tolerance class 6H Facts Tariff code: 90173000 Right‑hand thread orientation Category: Thread plug gauge / inspection gauge Includes: Calibration certificate Special features No‑go (reject) gauge for clear acceptance decision Suitable for metric ISO fine thread inspection Durable, hardened contact surfaces Delivered with calibration certificate for traceability FAQ What is the purpose of this no‑go thread plug gauge? The no‑go plug gauge is used to verify that internal metric ISO fine threads do not exceed the allowable maximum material condition; the M85 × 1.5 gauge provides a clear reject criterion for production control. Is a calibration certificate supplied with the gauge? Yes, the gauge is delivered with a calibration certificate that documents its inspection status at the time of delivery. Which standard and tolerance does the gauge conform to? Inspection geometry is specified to DIN 13 with a tolerance class of 6H for internal threads. Can this gauge be used for left‑hand threads? No, this particular gauge is manufactured for right‑hand metric ISO fine threads only. How does the hardened material benefit routine inspections? Hardened gauge steel preserves contact surfaces against wear, maintaining dimensional stability and extending the service life of the inspection tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M85x1.5 Thread Ring Gauge, Metric ISO Fine Right-Hand, Rejected/Out of Tolerance, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a metric fine‑thread control that combines DIN 13 conformity, hardened gauge steel and a supplied calibration certificate for reproducible rejects and acceptance decisions — order directly via Metav Werkzeuge or request advice from the consultants. Thread ring gauge (No‑go) M85 × 1.5 — right‑hand, DIN 13 6g (Metav IndustryLine) The thread ring gauge (No‑go) M85 × 1.5 provides a precise reject check for metric ISO fine threads and is designed for right‑hand applications in production and incoming inspection. No‑go ring for M85 × 1.5 Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, 6g Reliable rejection control for metric fine threads A dedicated no‑go ring is the simplest, most robust tool for separating acceptable parts from rejects at the sensor of the production line. The ring for M85 × 1.5 is manufactured to the DIN 13, 6g threading standard so that acceptance criteria are unambiguous at the shop floor. By checking the external thread against a defined reject limit, the device enables quick decisions during assembly, final inspection or goods receipt while reducing subjective judgement in manual checks. Durable construction for continuous use Constructed from hardened gauge steel, the ring is resistant to wear and retains dimensional integrity under frequent engagement. The material choice and machining ensure consistent contact geometry and minimise the need for frequent replacement, which supports steady quality control cycles and lowers downtime. For environments where mechanical stress and repeated verification are routine, the robust design keeps inspection intervals predictable and maintenance effort low. Traceable calibration for audit‑ready documentation Delivery includes a calibration certificate, offering documented evidence of conformity at the time of supply and supporting traceability in quality management systems. The presence of a calibration record simplifies record keeping for audit trails and supplier acceptance procedures and provides a verifiable baseline for periodic rechecks. This documented traceability is particularly relevant when contractual tolerances or regulatory requirements demand proof of measurement capability. Practical fit‑for‑purpose use in production workflows Designed as a straightforward go/no‑go element for fine threaded components, the gauge integrates easily into batch inspection routines, fixture checks and final assembly controls. The right‑hand orientation and standard thread form make the ring compatible with common metric fasteners and machined components, supporting consistent acceptance criteria across production batches. Implementation of this passive inspection stage contributes directly to process stability and reduced escape rates. For supply and specification support based on Metav IndustryLine quality, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement and traceable calibration documentation. Technical Data Article number: M315.885.6 Manufacturer: Metav IndustryLine GTIN: 4054469152912 Norm: DIN 13, 6g Facts Thread size: M85 × 1.5 Weight: 2 kg Tariff number: 90173000 Special features No‑go (reject) thread ring for right‑hand threads Material: hardened gauge steel Supplied with calibration certificate FAQ What is the purpose of this no‑go thread ring? The no‑go ring is used to verify that an external metric thread exceeds the reject limit; if the thread enters the ring, the part fails the inspection and is classified as scrap or rework. Is the gauge suitable for fine metric threads? Yes, the ring is specified for M85 × 1.5, a metric fine thread, and is manufactured to the DIN 13, 6g standard for consistent evaluation. Does the product include calibration documentation? The ring is supplied with a calibration certificate, providing traceable documentation of its condition at the time of delivery. Which material is used for the ring and why? Manufactured from hardened gauge steel, the ring offers wear resistance and long‑term dimensional stability under repeated engagement. How should the ring be used within a quality process? Incorporate the ring as a go/no‑go control during incoming inspection, final inspection or as part of a dedicated assembly check to prevent out‑of‑tolerance threads passing further into the process. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M85x2 Thread Go Gauge, Metric ISO Fine Thread Right-Hand, DIN 13 6g, Hardened Gauge Steel, Calibrated Certificate - Metav IndustryLine
Take advantage of hardened gauge steel, conformity to DIN 13 (6g) and an included calibration certificate for fast, traceable Go/No‑Go inspection; order the GO Thread Ring Gauge M85×2.0 directly via Metav Werkzeuge or ask our consultants if needed. GO Thread Ring Gauge M85×2.0 — GO ring gauge for metric ISO fine threads, right‑hand The GO Thread Ring Gauge M85×2.0 provides a compact, standards‑based solution for fast thread verification in production and incoming inspection, intended for use wherever metric ISO fine threads must be checked reliably Hardened gauge steel construction Conforms to DIN 13 tolerance 6g Supplied with calibration certificate Right‑hand GO ring for M85×2.0 threads Rapid functional checks for metric fine threads A GO‑only ring gauge lets operators perform an immediate functional check of the major diameter and pitch form without complex measuring equipment. By using a GO ring for the M85×2.0 size, parts that pass the test are accepted as within the specified major diameter and thread form for the DIN 13 (6g) tolerance. This method is significantly faster than full dimensional inspection and is therefore ideal for production spot checks and final line control, reducing throughput time while maintaining process reliability. Hardened construction and traceable calibration for consistent results Manufactured from hardened gauge steel, the ring resists wear and preserves the inspection limit over many cycles, which keeps maintenance intervals long and measurement drift low. Supplied with a calibration certificate, the gauge ensures traceability and documented conformity for quality records. These characteristics support repeatable decisions on the shop floor and simplify audit trails, helping to lower scrap rates and rework by providing an unambiguous pass criterion. Suitable for workshop and production environments Designed as a right‑hand GO ring for metric ISO fine threads, this gauge fits routine inspection workflows in machine shops, assembly lines and quality control benches. The simple GO/No‑GO principle requires minimal operator training and integrates with existing inspection routines; when paired with clear procedural rules, the ring delivers repeatable results and preserves interchangeability across mating parts. Its robust design makes it a pragmatic choice where durability and straightforward operation are priorities. Choose Metav IndustryLine precision gauges for dependable thread control; contact Metav Werkzeuge in Emmerich for specification advice and ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.785.7 GTIN: 4054469153735 Type: GO thread ring gauge Core measurements Thread: M85×2.0 Tolerance class: 6g (DIN 13) Weight: 2 kg Customs tariff number: 90173000 Materials & features Material: hardened gauge steel Hand: right‑hand Calibration: supplied with calibration certificate Conformity: metric ISO fine thread FAQ What does a GO ring gauge check? A GO ring gauge verifies that the external thread will assemble correctly with the nominal internal thread; the GO Thread Ring Gauge M85×2.0 confirms that the part meets the major diameter and form limits for DIN 13 (6g). Is a calibration certificate included? Yes, the gauge is supplied with a calibration certificate, which documents the inspection status and supports traceability for quality records. Can this gauge be used for go/no‑go inspection only? This item is a GO ring and is intended for functional (go) checking. For full tolerance control, a complementary NO‑GO gauge or dimensional measurement is required. Which standard does the gauge conform to? The ring is manufactured to comply with DIN 13 for metric ISO fine threads, tolerance class 6g, and is suited to production and incoming inspection applications. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M85x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a precise inspection workflow by combining no‑go verification, hardened gauge steel and an included calibration certificate for traceable quality control; order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. Gewinde‑Lehrdorn AUSSCHUSS M 85 x 2.0 — No‑go thread plug gauge, right‑hand, metric ISO fine thread Gewinde‑Lehrdorn AUSSCHUSS M 85 x 2.0 is a dedicated no‑go thread plug gauge for fast go/no‑go assessment of metric ISO fine threads in production and incoming inspection. No‑go gauge for M85 x 2.0 metric threads Hardened gauge steel for long service life Supplied with calibration certificate Conforms to DIN 13, 6H Faster inspection decisions through standardised go/no‑go control A dedicated no‑go thread plug gauge streamlines pass/fail inspections on threaded components. Designed for M85 x 2.0 metric ISO fine threads with right‑hand orientation and manufactured to DIN 13, 6H, this tool converts subjective gauging into an unambiguous verification step. The clear mechanical verdict provided by the reject gauge reduces cycle time at incoming goods and on the shop floor, lowers false acceptance rates and supports consistent production tolerances. The included calibration certificate documents traceability and simplifies audit preparation. Durable design that keeps measurement uncertainty low Constructed from hardened gauge steel, the gauge resists wear and maintains dimensional stability over repeated use, which preserves the verification limit and reduces the need for frequent replacement. The substantial mass and robust finish support repeatable checks even in busy workshop environments. Hardening and precise machining ensure that the functional diameter and thread form remain within control limits, so process capability is supported by a stable reference tool rather than frequent trial adjustments. Traceability and inventory integration for reliable quality systems Documentation and clear identifiers make the gauge straightforward to manage within quality systems. The product carries a GTIN and an internal article number for stock control and ERP linking, while the calibration paperwork establishes conformity for ISO audits and supplier quality agreements. As a branded Metav IndustryLine item, the gauge benefits from an established distribution and quality‑filtering point in Emmerich, which supports consistent availability and documented provenance for buyers seeking dependable metrology tools. Contact Metav Werkzeuge to discuss suitability for specific thread inspections or to request purchasing guidance for the Metav IndustryLine no‑go thread plug gauge M85 x 2.0 (SKU: M315.685.7) Technical data Article number: M315.685.7 GTIN: 4054469153520 Nominal size: M85 x 2.0 Thread direction: right‑hand Standard: DIN 13, 6H Facts Weight: 2 kg Customs tariff number: 90173000 Special features Material: hardened gauge steel Type: no‑go thread plug gauge (reject gauge) Supplied with calibration certificate Brand: Metav IndustryLine FAQ What is the intended application of this gauge? The Gewinde‑Lehrdorn AUSSCHUSS M 85 x 2.0 is intended for go/no‑go verification of M85 x 2.0 metric ISO fine threads in production, inspection and incoming goods. Is the gauge delivered with calibration documentation? Yes, the gauge is supplied with a calibration certificate, ensuring traceability and supporting quality audits for the Metav IndustryLine thread plug gauge M85 x 2.0 (SKU: M315.685.7). Which standard does the gauge comply with? The thread form and dimensions are manufactured to DIN 13, 6H, providing conformity with established metric ISO fine‑thread tolerancing. How does the no‑go gauge support workshop efficiency? By giving an immediate pass/fail result for the critical limit, the reject gauge reduces decision time, minimises false acceptance and helps maintain consistent production tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com