Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M75x6 Thread Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of a hardened gauge-steel inspection mandrel that meets DIN 13, 6H and is supplied with a calibration certificate for immediate traceability. Combine durability, standard conformity and documented calibration for reliable in‑process or incoming inspection — order this inspection gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread plug gauge M75 x 6.0 (right-hand) — hardened gauge steel, DIN 13 6H — Metav IndustryLine A calibrated thread plug gauge M75 x 6.0 for inspection of metric ISO fine threads, configured as a right‑hand checking mandrel and intended for production and quality‑control environments Hardened gauge steel finish Conforms to DIN 13, 6H Delivered with calibration certificate Right‑hand M75 x 6.0 inspection gauge Reliable conformity for metric fine‑thread inspection A dedicated thread plug gauge specified for M75 x 6.0 fine threads provides a clear, objective pass/fail check against the DIN 13 tolerance class 6H. By using a go/no‑go style inspection mandrel designed to the relevant standard, production lines and incoming inspection routines avoid subjective assessments and reduce scrap rates. The standardised geometry ensures that each acceptance decision is reproducible and directly comparable to drawing requirements, which supports traceable quality records and faster process decisions. Durable construction for repeatable checks and long service life Manufactured from hardened gauge steel, this inspection mandrel resists wear that would otherwise alter gauge form and jeopardise measurement integrity. The robust material choice and proven heat treatment preserve the thread flanks and profile under frequent use, so the tool maintains repeatable checks throughout production batches. The solid construction also simplifies handling and storage: routine visual checks and clean, dry storage keep the gauge in calibration for longer, limiting downtime for replacements. Traceable calibration and suitability for workshop control Supplied with a calibration certificate, the item supports documented measurement traceability for quality systems and audits. The certificate documents the inspection state at the time of delivery, enabling immediate use in documented control plans. Notably, the item description includes the label AUSSCHUSS, which appears on the part designation; the mandrel is supplied as described and is ready for integration into inspection routines. This combination of standard conformity, durable construction and delivered calibration makes the gauge well suited to workshop, toolroom and incoming‑goods inspection tasks where metric fine threads must be verified quickly and reliably. Contact Metav Werkzeuge to secure this calibrated M75 x 6.0 inspection gauge for your quality control procedures and to discuss how it fits into existing inspection plans; Metav Werkzeuge provides local stock and application advice from Emmerich. Technical data Article number: M315.675.A GTIN: 4054469155654 Brand: Metav IndustryLine Description: Thread plug gauge AUSSCHUSS M75 x 6.0, right-hand Facts Weight: 2 kg Customs tariff number: 90173000 Thread size: M75 x 6.0 Standard: DIN 13, 6H Special features Material: gauge steel, hardened Includes calibration certificate Right-hand thread Condition: AUSSCHUSS FAQ What is the primary use of this thread plug gauge? This plug gauge is intended to verify metric ISO fine threads in accordance with DIN 13, providing clear go/no‑go inspection for production and incoming control tasks. Is the item delivered calibrated? Yes — the thread plug gauge is supplied with a calibration certificate, documenting its measured condition at delivery. What does the label "AUSSCHUSS" mean on the listing? The product designation includes the label AUSSCHUSS as part of the item description; the gauge is supplied as labelled and with the stated calibration certificate. Which tolerance class does the gauge check against? The mandrel conforms to DIN 13, 6H and is manufactured to match the acceptance geometry for that tolerance class. How should the gauge be stored to preserve accuracy? Store the mandrel clean and dry, protect the threaded form from impact and contamination, and keep the calibration certificate with the item to preserve traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75×3 Thread Go Ring Gauge Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
The combination of a Go thread ring gauge made from hardened gauge steel and conformity to DIN 13, 6g ensures fast, repeatable thread verification with documented traceability; delivered with a calibration certificate for immediate use in quality control. Order the Go ring gauge directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Go thread ring gauge M75 x 3.0 — metric ISO fine thread, right-hand (Metav IndustryLine) The Go thread ring gauge M75 x 3.0 is a dedicated verification tool for right‑hand metric ISO fine threads, intended for workshop and inspection use to check internal thread conformity quickly and reliably. Go ring gauge M75 x 3.0, metric ISO fine thread Hardened gauge steel, DIN 13 tolerance 6g Delivered with calibration certificate Fast conformity checks that keep production moving For inline inspection and final checks, a Go ring gauge provides an immediate, unambiguous pass result for internal threads. The listed M75 x 3.0 size matches common fine‑threaded components used in mechanical assemblies, and the 6g tolerance class corresponds to the standard acceptance criteria defined in DIN 13. Because the gauge is manufactured from hardened gauge steel, the tool resists wear and preserves dimensional integrity over many cycles, reducing downtime for rework and limiting scrap rates — a direct gain in operational efficiency and process stability. Traceable calibration for quality systems Delivered with a calibration certificate, the gauge supports documented quality procedures and audit trails. The included certificate confirms measurement traceability and makes the instrument immediately usable within quality control systems. This level of traceability simplifies compliance with inspection plans and supports confidence in first‑article inspections and routine sampling. Where documented verification is required, the supplied calibration paperwork removes ambiguity and accelerates adoption on the shop floor and in the inspection bench. Robust geometry for repeatable applications The ring’s geometry is produced to the metric ISO fine‑thread form and finished to ensure smooth engagement during inspection cycles. The right‑hand Go gauge is intended for rapid checks: if the gauge enters freely, the thread meets the minimum major‑diameter and pitch‑diameter requirements for acceptance. Manufactured from hardened gauge steel, the ring sustains contact stresses and maintains edge definition, which translates to reproducible tactile feedback and consistent go/no‑go decisions over long service life. For environments with frequent use, this durability reduces the frequency of replacements and supports predictable inspection intervals. Practical suitability and workshop integration As a dedicated thread inspection tool, this ring gauge slots into existing gaugesets and inspection routines without need for additional adjustments. Its compact form is suited to bench inspection, incoming goods control and quick checks on assembly jigs. The tool’s specification and the supplied calibration allow straightforward inclusion in quality documentation and measurement logs. For businesses seeking to harmonise inspection practice across several production stations, the gauge provides a consistent reference that helps reduce measurement variation and improves inter‑operator comparability. For application advice or to purchase Metav IndustryLine’s hardened Go thread ring gauge M75 x 3.0 with calibration certificate, contact Metav Werkzeuge in Emmerich for ordering and specification support Technical data Article number: M315.775.8 GTIN: 4054469154480 Net weight: 2 kg Thread size: M75 x 3.0 Material: Hardened gauge steel Standard: DIN 13, 6g Tariff code: 90173000 Facts Right‑hand metric ISO fine thread Tolerance class 6g Calibration certificate included Category: Gauges / Thread gauges Special features Go (GUT) ring gauge for go/no‑go inspection Suitable for workshop and inspection bench use Durable hardened construction Compact, ready‑to‑use inspection tool FAQ What does a Go thread ring gauge check? A Go thread ring gauge verifies that an internal thread meets the minimum acceptance criteria; the Go thread ring gauge M75 x 3.0 confirms conformity to the specified metric ISO fine thread profile. Is a calibration certificate included with this gauge? Yes, the gauge is delivered with a calibration certificate, enabling documented traceability for the Metav IndustryLine Go thread ring gauge M75 x 3.0. Which standard does the gauge conform to? The ring gauge complies with DIN 13 and is manufactured to the 6g tolerance class for metric threads. Can this gauge be used on high‑volume production lines? The hardened gauge steel construction and clear pass/no‑pass result make this ring gauge suitable for frequent checks in production and incoming inspection. What identification is available for ordering and stock control? Order using article number M315.775.8 or GTIN 4054469154480 for the Metav IndustryLine Go thread ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75×4 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge steel and conformity with DIN 13, 6H, this no‑go plug gauge ensures fast, repeatable verification of right‑hand metric fine threads with clear go/no‑go distinction. Order the (no‑go plug gauge M75 x 4.0) directly via (Metav Werkzeuge) or ask our consultants if needed. No‑go plug gauge M75 x 4.0 — right‑hand metric fine thread, DIN 13 6H — Metav IndustryLine No‑go plug gauge M75 x 4.0 for quick inspection of right‑hand metric ISO fine threads in production and incoming‑inspection environments Hardened gauge steel construction Calibrated tool with certificate included Conforms to DIN 13, 6H tolerance Right‑hand M75 x 4.0 metric fine thread Reliable verification for metric fine threads that keeps production moving The plug provides an immediate, objective decision when checking metric fine threads: a clear no‑go condition for out‑of‑tolerance parts. Manufactured for the M75 x 4.0 pitch and rated to DIN 13, 6H, the gauge translates standardised nominal and tolerance data into a tactile pass/fail result, reducing interpretation time during quality checks. The use of a dedicated no‑go instrument shortens inspection cycles and helps maintain throughput while ensuring components meet specification. Wear‑resistant design for repeatable, stable measurements Constructed from hardened gauge steel, the tool is designed for repeated use in workshop and shop‑floor conditions where abrasion and contact stresses accumulate. The material choice and heat treatment provide high surface hardness and resistance to wear, which prolongs gauge life and preserves the defined acceptance boundary over time. As a result, inspection consistency is improved and recalibration intervals can be optimised, supporting uninterrupted production and reliable quality control. Traceable calibration for quality systems and documentation Delivered with a calibration certificate, the gauge supports documented quality processes and audit requirements. Certificate inclusion documents the measurement state at delivery and simplifies integration into inspection plans and records. Identification data such as SKU and GTIN are available for asset tracking and inventory control, which assists in traceability and configuration management across manufacturing and calibration workflows. For traceable thread inspection, choose the Metav IndustryLine no‑go plug gauge M75 x 4.0 — contact Metav Werkzeuge in Emmerich for procurement advice and technical clarification. Technical data SKU: M315.675.9 GTIN: 4054469155036 Tariff code: 90173000 Facts Nominal thread: M75 x 4.0 Tolerance class: 6H Weight: 2 kg Special features Material: hardened gauge steel Right‑hand metric ISO fine thread No‑go (reject) plug gauge function Includes calibration certificate FAQ What does the no‑go function check on this plug gauge? The no‑go plug gauge establishes whether an internal thread exceeds the maximum material condition; the no‑go plug gauge M75 x 4.0 indicates rejection when it does not enter or thread correctly. Is a calibration certificate supplied with the gauge? Yes, the tool is supplied with a calibration certificate confirming its measurement state at delivery for the Metav IndustryLine plug gauge (SKU M315.675.9). Can the gauge be used for non‑metric threads? This gauge is manufactured specifically for the M75 x 4.0 metric fine thread standard and is not suitable for non‑metric profiles without conversion or a dedicated gauge. How does the DIN 13, 6H specification affect inspection? DIN 13, 6H defines the nominal form and tolerance class; using a gauge matched to DIN 13, 6H ensures inspection aligns with accepted thread geometry and tolerance limits. What maintenance is recommended to prolong gauge life? Regular cleaning, careful storage and periodic recalibration will protect the hardened surfaces and maintain the defined acceptance limits of the plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M75×4 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Order precision checks confidently thanks to a hardened GO plug gauge that is made for metric ISO fine threads, delivered with a traceable calibration certificate; combine compliance with simple inspection workflows and minimise rework. Arrange the gauge via Metav Werkzeuge or consult their specialists for application advice. Thread plug gauge GO M75×4 — metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge GO M75×4 verifies M75×4 metric ISO fine threads on right-hand components, suitable for production inspection and incoming goods control Calibrated delivery with certificate For metric ISO fine thread M75×4 Manufactured from hardened gauge steel Conforms to DIN 13, tolerance class 6H Consistent pass/fail inspection that saves time The GO plug gauge serves as a rapid, unambiguous check during assembly and incoming inspection. By providing a single definitive gauge for the acceptable limit, the inspection routine becomes faster and less error‑prone; this reduces stoppages and helps to avoid costly rework. Combined with the DIN 13 / 6H specification, the tool ensures conformity with standardised metric thread tolerances, supporting consistent quality control in daily production. Robust material and geometry for repeatable results Constructed from hardened gauge steel, the gauge resists wear under repeated use, preserving the M75×4 profile over many inspection cycles. The stable material and precise machining maintain the intended fit and contact geometry, which means fewer false rejects and longer service intervals. The compact, purpose‑made form of the plug gauge simplifies handling on the shop floor while keeping measurement integrity across batches. Traceable calibration for documented quality assurance Delivered with a calibration certificate, the gauge enters the metrological chain ready for audit and documentation. The supplied certificate records the calibration status and provides traceability that supports internal quality records and supplier audits. Using a calibrated inspection tool streamlines acceptance procedures and substantiates conformity claims during production release. Practical integration into workshop routines As a dedicated inspection tool for metric ISO fine thread components, the plug gauge fits naturally into go/no‑go workflows and final checks. The simple pass/fail design eliminates interpretation, shortening operator training and easing throughput at control stations. For manufacturers seeking reliable, standards‑based thread verification, this inspection gauge delivers a pragmatic balance of durability and operational clarity. For calibrated, DIN‑compliant gauges from Metav IndustryLine contact Metav Werkzeuge in Emmerich for technical advice and to request a quotation Technical data Article number: M315.575.9 GTIN: 4054469154855 Label: Thread plug gauge GO M75×4, metric ISO fine thread, right-hand Facts Thread size: M75×4 Weight: 2 kg Norm: DIN 13, 6H Special features Material: hardened gauge steel Type: GO plug gauge for right‑hand metric ISO fine thread Delivery: calibrated with certificate FAQ What thread does this gauge inspect? The gauge is specified for M75×4 metric ISO fine threads and is intended for right‑hand thread verification. Is the gauge delivered calibrated? Yes, this Metav IndustryLine GO plug gauge is supplied with a calibration certificate that documents its inspection status. Which standard does the tool comply with? The inspection tool conforms to DIN 13 and is manufactured to tolerance class 6H for metric ISO threads. Can this plug gauge be used for final acceptance checks? The GO plug gauge is suitable for go/no‑go style acceptance checks and incoming goods inspection where a pass/fail method is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76 x 2.0 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of DIN 13, 6H compliance, hardened gauge steel construction and delivery with a traceable calibration certificate to streamline thread inspection and reduce rework. Order the Go plug gauge directly via Metav Werkzeuge or ask the consultants for application advice and delivery details. Go thread plug gauge M76 × 2.0 — metric ISO fine thread, right-hand (Metav IndustryLine) The Go thread plug gauge M76 × 2.0 is a purpose-built right‑hand plug gauge for verifying metric ISO fine internal threads in production and inspection environments. Go plug gauge for M76 × 2.0 threads Hardened gauge steel construction Calibrated delivery with certificate Conforms to DIN 13, tolerance 6H Fast accept/reject control for production efficiency A dedicated Go thread plug gauge provides immediate, unequivocal pass/fail verification for internal threads, accelerating inspection routines on the shop floor. The M76 × 2.0 format is tailored for metric ISO fine threads, enabling rapid in‑line checks that cut downtime and reduce the risk of scrapped parts. Because the gauge is a simple mechanical reference, it removes interpretation errors associated with subjective gauging and speeds throughput in repetitive testing tasks. Robust construction for repeatable measurements Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional stability under repeated use. The tool is engineered to the DIN 13, 6H tolerance class, which defines the allowed internal thread envelope for many standard assemblies; this ensures compatibility with common engineering specifications. A rigid design and precise thread profile provide long service life and predictable performance, reducing the need for frequent replacements and helping to preserve process capability over time. Traceable calibration and documented quality Delivered with calibration certificate, the plug gauge arrives ready for immediate use in quality assurance procedures and audit trails. The supplied documentation records the measured condition at delivery, supporting traceability and compliance in regulated production environments. The gauge is supplied as a Go (GUT) plug, right‑hand thread form, and is identified as SKU M315.576.7, facilitating inventory control and calibration scheduling within calibrated tool pools. Secure this Go plug gauge through Metav Werkzeuge or request tailored advice from our consultants to confirm fit and delivery options for your application. Technical data SKU: M315.576.7 GTIN: 4054469153117 Weight: 2 kg Data Thread size: M76 × 2.0 Nominal diameter: 76 mm Pitch: 2.0 mm Tariff number: 90173000 Special features Material: hardened gauge steel Tolerance: DIN 13, 6H Type: Go (GUT) plug gauge, right‑hand Includes calibration certificate FAQ What is the primary use of this plug gauge? The Go thread plug gauge is intended for quick acceptance testing of internal metric ISO fine threads; the M76 × 2.0 format verifies whether a threaded bore meets the defined tolerances. Is the gauge supplied calibrated? Yes, the gauge is delivered with a calibration certificate, documenting its measured condition at delivery for traceability in inspection routines. Which standard does the gauge conform to? The gauge is manufactured to DIN 13, 6H, the common tolerance class for metric internal threads, ensuring conformity with standard engineering requirements. How does the material affect longevity? Made from hardened gauge steel, the plug gauge offers high wear resistance and dimensional stability, which supports reproducible measurements over extended service intervals. How can the gauge be identified in stock and records? The item is listed as SKU M315.576.7 and carries GTIN 4054469153117, simplifying inventory tracking and calibration management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x1.5 Thread Go Plug Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of a hardened-gauge-steel construction, conformity to DIN 13 with tolerance 6H, and delivery including a calibration certificate for reliable thread verification; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go Thread Plug Gauge M76 x 1.5 — GO plug for metric ISO fine thread (right-hand) — Metav IndustryLine The Go Thread Plug Gauge M76 x 1.5 is a precision inspection gauge designed for fast verification of metric ISO fine internal threads in right-hand components. Hardened gauge steel for long-term durability Conforms to DIN 13, tolerance 6H Supplied with calibration certificate For M76 x 1.5 metric ISO fine thread, right-hand Precision inspection that speeds up quality control The GO plug offered here is built to give unambiguous go/no‑go style verification for internal threads, enabling a clear pass result where the GO dimension fits without force. Constructed from hardened gauge steel, the plug resists wear and preserves the inspection limit over extended production runs, which reduces rework and inspection variability. This tangible durability translates into predictable cycle times and fewer stoppages in assembly operations, supporting efficient shop‑floor decision‑making. Designed for repeatability in shop and inspection rooms A threaded verification tool must deliver consistent contact geometry; this plug gauge is manufactured to the DIN 13 profile and 6H tolerance class, ensuring compatibility with ISO metric fine-thread specifications. The standard conformity helps integrate the gauge into existing quality-control routines and documentation. Since the tool provides a simple mechanical check, the inspection result is immediate and suitable for both spot checks on the production line and documented acceptance testing in the metrology lab. Traceable calibration for confident measurement results Delivered with a calibration certificate, the gauge supports traceability for quality assurance and audit purposes. The supplied certificate documents the inspection limits and acceptance status at the time of delivery, which is particularly useful when maintaining calibration intervals for inspection equipment. For companies that require documented evidence of conformity as part of incoming‑goods or final‑inspection protocols, the certificate removes uncertainty about the gauge’s starting condition. Practical features that simplify everyday use Marked for M76 x 1.5 and specified for right‑hand threads, the plug is compact to handle yet robust enough for repeated seating into components. The clear go‑only function reduces the risk of misinterpretation: the part either engages freely (pass) or it does not (fail). The gauge’s construction minimises distortion during handling, and the defined profile eases rapid inspection without complex setup. Where threaded tolerances must be upheld repeatedly, a dedicated plug gauge like this preserves measurement integrity while keeping inspection straightforward. Contact Metav Werkzeuge for delivery and application guidance on the Metav IndustryLine GO plug gauge M76 x 1.5 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M315.576.6 GTIN: 4054469152158 Size: M76 x 1.5 Material: hardened gauge steel Standard: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Numbers / Core technical data Thread diameter: 76 mm Thread pitch: 1.5 mm Tolerance class: 6H Condition: GO (GUT) plug gauge Special features GO plug gauge for internal thread verification Right-hand metric ISO fine thread application Supplied with calibration certificate Category: Thread gauges / Gauges FAQ Is the gauge supplied with calibration documentation? Yes. The GO plug gauge M76 x 1.5 is supplied with a calibration certificate documenting its acceptance at delivery. Which standard does this thread plug follow? The thread plug conforms to DIN 13 and is manufactured to the 6H tolerance class for ISO metric fine threads. Can the gauge be used for right- and left-hand threads? This specific plug is made for right-hand metric threads; a left-hand version would be required for left-hand applications. What material is the plug made from and why does it matter? The plug is manufactured from hardened gauge steel, which ensures wear resistance and stable inspection limits over prolonged use. How is the GO function interpreted during inspection? A correct component will accept the GO plug without forced engagement; failure to fit indicates the thread does not meet the specified internal profile. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x1.5 Thread Go/No-Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a precise, production-ready no-go thread plug gauge that combines hardened gauge steel, standard-compliant tolerancing and a supplied calibration certificate to keep inspection fast and traceable; order or request advice from Metav Werkzeuge for an efficient quality-control workflow. Thread plug gauge — No-go plug for M76 × 1.5 (right-hand), hardened gauge steel, DIN 13 (6H) — Metav IndustryLine The thread plug gauge M76 × 1.5 designed as a dedicated no-go (reject) plug for rapid verification of metric ISO fine threads in production and inspection environments No-go plug for reject verification Hardened gauge steel construction DIN 13 tolerance class 6H Delivered with calibration certificate Reduce rework with immediate go/no-go decisions A dedicated no-go plug gauge provides an immediate, unambiguous check for threaded parts: either the no-go end enters (reject) or it does not (accept). Built for efficiency on the shop floor, this checking method removes interpretation from the process and shortens inspection cycles. The gauge’s conformity to DIN 13 and tolerance class 6H ensures that thread acceptance is aligned with international metric ISO fine-thread standards, enabling clear pass/fail decisions during incoming inspection, in-process control and final checks. Robust materials for long-term repeatability Manufactured from hardened gauge steel, the instrument resists wear and preserves its functional geometry over extended service life, contributing to stable measurement results and fewer gauge replacements. The compact, solid design supports repeated mechanical engagement without risking dimensional drift; as a result, reproducibility across batches improves and process capability is easier to maintain. The right-hand M76 × 1.5 specification matches common fine-thread applications in mechanical assemblies and heavy components where repeatable thread control is essential. Traceable calibration to support quality systems Supplied with a calibration certificate, the gauge arrives ready for documented quality assurance and audit trails. The certificate records the inspection status and provides traceability that integrates with factory quality records and inspection plans. Using calibrated, standard-compliant gauges reduces uncertainty in acceptance testing and supports continuous improvement by offering a verifiable baseline for process stability and defect reduction. Contact Metav Werkzeuge for an application assessment and a tailored quotation for the Metav IndustryLine thread plug gauge delivered with calibration certificate Technical data Article number: M315.676.6 GTIN: 4054469152394 SKU: M315.676.6 Label: Gewinde‑Lehrdorn AUSSCHUSS M 76 X 1,5 für metrisches ISO‑Feingewinde, rechts Data Thread size: M76 × 1.5 Tolerance class: 6H (DIN 13) Weight: 2 kg Special features Hardened gauge steel No-go (reject) plug gauge Right‑hand thread Supplied with calibration certificate Customs tariff number: 90173000 FAQ What does the term “AUSSCHUSS” indicate for this gauge? In this context, “AUSSCHUSS” denotes the no‑go (reject) end of the thread plug gauge, which is used to verify that a threaded part exceeds allowable limits for acceptance; the thread plug gauge M76 × 1.5 therefore provides a clear reject criterion. Is the gauge suitable for routine production checks of M76 × 1.5 threads? Yes, the Metav IndustryLine no‑go plug is intended for routine go/no‑go verification of M76 × 1.5 metric fine threads and is appropriate for shop‑floor and incoming inspection use. Does the supplied calibration certificate cover traceability requirements? The instrument is supplied with a calibration certificate documenting its measured status at delivery; this certificate supports traceability and integration into existing quality documentation for the thread plug gauge M76 × 1.5. Which standard governs the thread tolerancing of this gauge? Thread tolerancing for this plug is aligned with DIN 13 and the tolerance class 6H, matching the common metric ISO fine-thread practice used in mechanical engineering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x1.5 Thread Ring Gauge Right-Hand, Reject, Hardened Gauge Steel, DIN 13 6g Calibrated Certificate - Metav IndustryLine
Secure reliable thread inspection with a hardened gauge‑steel no‑go ring for M76 x 1.5 metric fine threads; the ring is manufactured to DIN 13, 6g and supplied with a traceable calibration certificate. Take advantage of precise reject checks and durable construction for consistent quality control. Order through Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge REJECT M76 x 1.5 — No‑go ring gauge for metric ISO fine threads (Metav IndustryLine) A reject (no‑go) thread ring gauge, M76 x 1.5, for right‑hand metric ISO fine threads used in production and incoming inspection Hardened gauge steel construction Designed for M76 x 1.5 metric fine thread Supplied with calibration certificate Conforms to DIN 13, 6g Robust, repeatable reject checking for production environments The Hardened gauge steel body gives the gauge long service life under repetitive use while maintaining dimensional stability. As a no‑go ring, it provides a clear binary control: parts that do not pass the gauge must be rejected, reducing the risk of out‑of‑tolerance assemblies. Manufactured to DIN 13, 6g, the tool is suitable for fine metric thread verification in serial production and quality assurance processes, supporting reliable decisions at the inspection bench. Traceable calibration and simple verification workflow Delivered with a calibration certificate, the ring enables documented traceability for internal quality records and audit trails. The certificate confirms the inspection status at the time of dispatch and helps integrate the gauge into existing quality systems. Use the ring as part of standard incoming inspection or final control; the straightforward go/no‑go principle reduces operator interpretation and speeds up throughput without sacrificing measurement integrity. Practical benefits that shorten cycle times and lower scrap By implementing a dedicated reject gauge for M76 x 1.5 threads, non‑conforming components are identified immediately, cutting rework and preventing defective items reaching assembly. The hardened construction and compact design make it easy to handle on the shop floor, while the normative specification ensures compatibility with established production tolerances. For workshops and production lines seeking robust thread control, this gauge supports faster decisions and steadier output quality. For dependable thread control from the Metav IndustryLine range, contact Metav Werkzeuge for ordering and application support — our consultants at info@metav-werkzeuge.com or +49 2822 7131930 will advise on integration and inspection strategy Technical data Article number: M315.876.6 GTIN: 4054469152875 Manufacturer: Metav IndustryLine Facts Thread size: M76 x 1.5 Standard: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Special features Hardened gauge steel Reject (no‑go) ring gauge Right‑hand thread Supplied with calibration certificate FAQ What does a reject (no‑go) ring gauge check? A reject ring gauge verifies whether a threaded part exceeds acceptable limits; the supplied reject ring for M76 x 1.5 identifies parts that must be rejected according to the specified tolerance class. Is the gauge delivered ready for use in quality documentation? Yes, the gauge is supplied with a calibration certificate so the Metav IndustryLine reject ring can be entered into quality records and used for traceable inspection. Which thread standard does this ring follow? The tool is manufactured to DIN 13, 6g, matching the tolerance class for metric ISO fine threads and allowing consistent assessment against that standard. Can this gauge be used on the shop floor for incoming inspection? The hardened construction and simple go/no‑go principle make the ring suitable for both incoming inspection and in‑process checks within production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x2 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel design and DIN‑13 6g conformity combined with a supplied calibration certificate for reliable go/no‑go inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for procurement and traceability support. Thread plug gauge GUT M76 x 2.0 (right-hand) – DIN 13, 6g, hardened gauge steel A Thread plug gauge GUT M76 x 2.0 for verifying metric ISO fine threads (right-hand), intended for production control and incoming inspection. Delivered with calibration certificate Hardened gauge steel construction DIN 13 tolerance 6g confirmation Right-hand metric ISO fine thread Consistent inspection accuracy for shopfloor control The thread plug gauge is engineered for rapid go/no‑go verification of metric ISO fine threads, giving clear pass/fail results that reduce interpretation time at the bench. Built to the DIN 13 specification with 6g tolerance, the gauge provides a reliable reference for thread acceptance criteria in assembly and quality control. The delivered calibration certificate documents conformity and supports traceability in audit processes, helping to maintain reproducible checks across shifts. Durable construction for repetitive use Constructed from hardened gauge steel, the gauge resists wear under frequent application and keeps its functional profile longer than untreated tools. The robust build reduces the need for frequent replacement, supporting continuous operation in production or inspection departments. With a compact form appropriate for bench use and a mass of 2 kg, the device balances handling stability with manageable weight for typical workshop routines. Procurement confidence and traceability for quality systems Sourcing the GUT M76 x 2.0 thread plug gauge through the Metav IndustryLine channel links the instrument to documented supply-chain reliability and central stock management. The item is listed under SKU M315.776.7 and GTIN 4054469153704 for unambiguous ordering and inventory tracking. Specification-led procurement, combined with the included calibration documentation, simplifies incorporation into existing quality-management systems and supports repeatable inspection workflows. Contact Metav Werkzeuge today to request the GUT M76 x 2.0 thread plug gauge (SKU M315.776.7) with calibration certificate and secure a traceable inspection solution from Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) Technical Data Article number: M315.776.7 GTIN: 4054469153704 Thread size: M76 x 2.0 Material: hardened gauge steel Standard: DIN 13, tolerance 6g Weight: 2 kg Facts Diameter: 76 mm Pitch: 2.0 mm Tolerance class: 6g Special features Right-hand metric ISO fine thread Delivered with calibration certificate Hardened gauge steel construction Intended for go/no‑go inspection Category: Gauges / Plug gauges FAQ What thread standard does this gauge verify? The gauge verifies metric ISO fine threads to DIN 13 with a 6g tolerance class, suitable for production and inspection checks. Is a calibration certificate provided with the gauge? Yes, the gauge is supplied with a calibration certificate that documents the measured conformity and supports traceability for quality records. What material is the gauge made from? The gauge is manufactured from hardened gauge steel, which improves wear resistance and longevity under repeated use. Is the thread gauge right‑handed or left‑handed? This version is a right‑hand metric ISO fine thread plug gauge designed for standard right‑hand threaded components. How can the gauge be ordered for a controlled inspection process? Order by SKU M315.776.7 via Metav IndustryLine to ensure consistent supply and documented traceability; the GTIN for inventory is 4054469153704. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6H, Calib. Certificate - Metav IndustryLine
Ensure reproducible thread inspection with a hardened gauge steel design, metric M76 × 2.0 sizing and an included calibration certificate for traceable results; secure this no‑go plug gauge through Metav Werkzeuge or consult the specialists for application guidance. Gewinde‑Lehrdorn M76 x 2.0 (No‑go) — Thread plug gauge, right‑hand (Metav IndustryLine) The Gewinde‑Lehrdorn M76 x 2.0 is a right‑hand thread plug gauge for verification of metric ISO fine threads, designed for workshop and production inspection. Hardened gauge steel construction Metric M76 × 2.0 fine thread DIN 13, tolerance 6H Includes calibration certificate Consistent inspection for production lines The thread plug gauge delivers a fast, unambiguous check during in‑process or final inspection. Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional integrity under frequent handling, which reduces the need for frequent replacement and keeps downtime low. Its design as a No‑go (reject) gauge provides a clear pass/fail criterion, enabling quick decisions on threaded components and supporting a smoother production flow. Designed for reliable measurement and traceability Tolerance adherence to DIN 13 6H ensures compatibility with standard metric ISO fine threads and provides a familiar reference for quality teams. Supplied with a calibration certificate, the tool supports documented quality routines and audit trails; calibration details are included with delivery to validate conformity and facilitate traceability. The compact, robust profile simplifies handling on the shop floor and integrates into standard inspection routines without special fixtures. Practical benefits for workshop and quality departments As a dedicated thread inspection tool, the gauge shortens inspection cycles and reduces ambiguity compared with visual checks or improvised gauges. The M76 x 2.0 designation matches common fine‑pitch applications in mechanical assemblies and fittings, so the gauge supports targeted checks where consistent thread acceptance criteria are essential. Built for repeatability, the instrument contributes to fewer scrapped parts and a higher first‑pass yield when embedded in systematic quality control. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M76 x 2.0 no‑go thread plug gauge into inspection workflows and to arrange supply from Emmerich. Technical data SKU: M315.676.7 GTIN: 4054469153490 Thread designation: M76 x 2.0 Standard: DIN 13, 6H Weight: 2 kg Customs tariff number: 90173000 Facts Material: gauge steel, hardened Hand: right‑hand thread Type: No‑go (reject) plug gauge Delivery scope: calibration certificate included Special features Designed for metric ISO fine threads Shop‑floor ready geometry Long‑term dimensional stability Clear pass/fail inspection criterion FAQ What is the intended use of this plug gauge? The plug gauge is intended for go/no‑go verification of metric ISO fine threads; the M76 x 2.0 no‑go gauge confirms whether internal threads exceed permitted limits. Is the gauge supplied with calibration documentation? Yes, the tool is supplied with a calibration certificate; the calibration certificate accompanies the Metav IndustryLine M76 x 2.0 plug gauge for traceable inspection records. Which standard does the gauge comply with? The gauge conforms to DIN 13 with tolerance class 6H, matching standard metric ISO thread specifications for consistent acceptance criteria. What material is the gauge made from and how durable is it? Constructed from hardened gauge steel, the plug gauge is designed for wear resistance and stable performance under regular inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x2 Thread Ring Gauge For Metric ISO Fine Thread Right-Hand Calibrated, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, conformity to DIN 13, 6g, and delivery with a calibration certificate for reliable thread inspection; order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge No‑go M76 x 2.0 — No‑go ring for metric ISO fine threads (right‑hand), Metav IndustryLine The thread ring gauge No‑go M76 x 2.0 is a dedicated no‑go ring gauge for right‑hand metric ISO fine threads, designed for clear go/no‑go decision making in production and incoming inspection. No‑go gauge for M76 x 2.0 Hardened gauge steel construction Conforms to DIN 13 6g Supplied with calibration certificate Ensure rejects are detected reliably during inspection A dedicated No‑go ring is the quickest way to verify whether a threaded part exceeds tolerance limits: if the ring does not fit, the thread is acceptable; if it passes, the part must be rejected. The supplied component is made for M76 x 2.0 metric ISO fine threads and is manufactured to DIN 13 6g, providing an objective reference that integrates directly into standard quality procedures. Using a purpose‑built no‑go ring reduces subjective judgement and increases throughput in routine checks by converting a complex measurement decision into a simple pass/fail action. Robust design for repeatable measurements and traceability Constructed from hardened gauge steel, this ring resists wear and maintains geometric stability over repeated cycles, which helps to preserve inspection integrity in demanding shop‑floor environments. The gauge is delivered with a calibration certificate, ensuring each item is traceable and suitable for documented quality systems. For workshops and production lines that require documented evidence of conformity, the certificate supports audit trails and calibration schedules without the need for additional immediate measurement verification. Practical use cases that save time and reduce scrap Ideal for final inspection, in‑process checks and quick acceptance tests, the no‑go ring reduces downstream rework by catching oversize threads before assembly. The compact, single‑function nature of the ring makes it suitable for use at assembly stations and incoming goods counters where fast decisions are required. As part of a broader quality strategy, combining this ring with periodic calibration and documented inspection routines will help to lower defect rates and support traceable production records, reinforcing confidence in batch releases. Contact Metav Werkzeuge for a certified M76 x 2.0 No‑go ring gauge and expert application guidance from our Emmerich team Technical data Article number: M315.876.7 GTIN: 4054469153919 Customs tariff number: 90173000 Facts Size: M76 x 2.0 Weight: 2 kg Standard: DIN 13, 6g Special features Material: Gauge steel, hardened Type: No‑go ring gauge (Ausschuss) Right‑hand thread Supplied with calibration certificate FAQ What does "No‑go" mean for this ring gauge? A No‑go ring is used to detect oversize threads; the ring must not pass on a correct part. The Thread ring gauge No‑go M76 x 2.0 serves this specific inspection role in thread quality checks. Is the gauge supplied calibrated? Yes, the ring gauge is supplied with a calibration certificate, ensuring traceability and suitability for documented inspection procedures. Which thread standard does the ring follow? The gauge is manufactured to DIN 13, 6g for metric ISO fine threads and is specified for M76 x 2.0 right‑hand threads. Can this gauge be used on the shop floor for routine checks? Yes, the hardened construction and simple go/no‑go use make the ring suitable for shop‑floor inspections, incoming goods checks and final control stations. Which brand and article number identify this item? This item is part of the Metav IndustryLine and is listed under article number M315.876.7. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x3 Thread Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Benefit from precise, standards‑compliant inspection: durable hardened gauge steel, conformity to DIN 13 (6H) and a supplied calibration certificate ensure reliable acceptance decisions and fewer rework loops. Order the thread plug gauge directly via Metav Werkzeuge or consult the technical team for application advice. Thread plug gauge GUT M76 x 3.0 – metric ISO fine internal thread, right‑hand (Metav IndustryLine) A Thread plug gauge GUT M76 x 3.0 for rapid verification of metric ISO fine internal threads in production and incoming inspection. Go gauge for M76×3 metric fine thread Hardened gauge steel construction Supplied with calibration certificate Manufactured to DIN 13, tolerance 6H Consistent thread verification for production control The plug gauge is designed for fast, repeatable thread verification on internal threads sized M76 x 3. As a go gauge, the implement confirms whether an internal thread meets the acceptance envelope defined by DIN 13 with tolerance class 6H, enabling clear go/no‑go decisions at the inspection bench. The result is a measurable reduction in ambiguity during quality control and fewer downstream corrective actions, supporting smoother production flow and consistent part conformity. Traceable calibration for documented inspection results Supplied with a calibration certificate, the gauge provides documentary proof of its measurement status at delivery. Traceability of calibration reduces acceptance disputes and facilitates audit‑proof processes in manufacturing and quality assurance. The certificate documents the condition of the inspection device at the time of handover, allowing inspection records to reference a verified standard and supporting longer intervals between in‑house checks when organised calibration schedules are in place. Robust construction for long service life and simple handling Constructed from hardened gauge steel, the tool resists wear from repeated engagement with internal threads and maintains dimensional stability under routine workshop conditions. The substantial mass supports stable insertion and tactile feedback during inspection; the gauge’s hardened finish ensures prolonged durability and constant performance, which in turn helps to reduce replacement costs and preserve measurement reliability across batches. Select the Metav IndustryLine plug gauge for traceable thread inspection and contact Metav Werkzeuge in Emmerich for specialist procurement support and application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.576.8 GTIN: 4054469154114 Net weight: 2 kg Thread size: M76 x 3 Facts Material: hardened gauge steel Standard: DIN 13, 6H Customs tariff number: 90173000 Special features Supplied with calibration certificate Go gauge for metric ISO fine internal thread Category: Gauges / Thread inspection tools FAQ What does the "go" designation mean for this gauge? The go designation indicates the plug gauge will enter an internal thread that meets the acceptance limits; the Thread plug gauge GUT M76 x 3.0 (Metav IndustryLine, SKU M315.576.8) is intended to confirm that the internal thread is within the specified tolerance envelope. Is a calibration certificate included with delivery? Yes. Delivery of the plug gauge includes a calibration certificate that documents the gauge condition at handover and supports traceability in inspection records. For which standard is this gauge manufactured? The gauge is produced to DIN 13 with tolerance class 6H, suitable for metric ISO fine thread verification at the specified size. What material is the gauge made from and how does this affect use? Manufactured from hardened gauge steel, the gauge provides wear resistance and stable dimensions during repeated use, contributing to consistent inspection outcomes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x3 Thread Go/No-Go Plug Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Benefit from a calibrated, hardened gauge built to DIN 13, 6H: the M76 x 3.0 no‑go plug gauge provides reliable rejection testing for metric ISO fine threads and reduces the risk of assembly faults; order the gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Plug Gauge M76 x 3.0 (No‑Go) — Metav IndustryLine, hardened gauge steel The Thread Plug Gauge M76 x 3.0 (No‑Go) is a right‑hand plug gauge intended for verification of metric ISO fine threads to DIN 13, 6H in production and inspection environments. Includes calibration certificate Hardened gauge steel for long service life Conforms to DIN 13, 6H specification Right‑hand metric fine thread M76 x 3.0 Ensure rejects are detected before assembly A dedicated no‑go plug gauge is the fastest way to confirm that internal threads exceed the permissible size limit. Manufactured from hardened gauge steel, this gauge resists wear and maintains the set limit across repeated cycles, which helps to avoid false acceptances that cause costly rework. Traceable verification via the supplied calibration certificate documents measurement validity for quality records and ensures that rejection decisions are defensible during audits. Stability and repeatability that keep production flowing The compact, purpose‑built design provides a consistent tactile check during manual inspections and is equally suitable for use in gauge blocks or fixture checks on small batches. The tool’s material and heat treatment maintain dimensional stability under normal workshop conditions, so the right‑hand M76 x 3.0 profile remains true to the DIN standard over time. This repeatability reduces interruption to assembly lines and supports efficient in‑process quality control. Traceable calibration and workshop integration Delivered with a calibration certificate, the plug gauge integrates into documented quality systems immediately on receipt. The certificate records the calibration status and supports traceability without additional delay; the item can be logged into inventory and used for go/no‑go inspections straight away. For organisations maintaining documented inspection intervals, using a calibrated plug gauge simplifies having a verifiable chain of compliance for metric ISO fine threads. For traceable rejection testing and secure supply, request the calibrated Metav IndustryLine M76 x 3.0 no‑go plug gauge from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.676.8 GTIN: 4054469154305 Tariff code: 90173000 Weight: 2 kg Material: hardened gauge steel Thread: M76 x 3.0 Standard: DIN 13, 6H Numbers / Core technical data Nominal thread size: M76 x 3.0 Weight (approx.): 2 kg Tariff number: 90173000 Designs / Special features No‑go (reject) plug gauge for threads Right‑hand metric ISO fine thread Hardened, wear‑resistant gauge steel Calibration certificate included Intended for production and inspection use FAQ What is the primary function of this plug gauge? The plug gauge serves as a no‑go verification tool to detect internal threads that exceed tolerances; the Metav IndustryLine M76 x 3.0 plug gauge is used to identify rejectable metric ISO fine threads. Can this gauge be used immediately after delivery? Yes. The gauge is supplied with a calibration certificate, so it can be entered into inspection routines and used for go/no‑go testing upon receipt. Is the gauge suitable for continuous shop‑floor use? The hardened gauge steel construction is designed for regular inspection tasks; routine handling under normal workshop conditions will preserve dimensional stability and service life. Which standard does the thread profile correspond to? The thread form conforms to DIN 13, 6H, matching the requirements for metric ISO fine internal threads. Is the gauge right‑hand or left‑hand? This plug gauge is a right‑hand thread gauge for metric fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x3 Thread Ring Gauge Go Metric ISO Fine Pitch Right-Hand Hardened Gauge DIN 13 6g With Calibration Certificate - Metav IndustryLine
Combining DIN 13 conformity, a hardened gauge steel construction and an included calibration certificate, this Go ring gauge delivers repeatable, production‑grade inspection for metric fine threads; it supports reliable process control and reduces rework. Order the gauge directly via Metav Werkzeuge or contact our consultants for specification support. Go thread ring gauge M76×3 — Right‑hand, metric ISO fine thread (Metav IndustryLine) The Go thread ring gauge M76×3 is a right‑hand ring gauge designed for rapid verification of external metric ISO fine threads in production and incoming inspection; suitable where repeatable acceptance checks are required. Go ring gauge M76×3, metric ISO fine thread Hardened gauge steel for long service life Manufactured to DIN 13, tolerance 6g Delivered with calibration certificate Ensure correct fit with every inspection A Go thread ring gauge is intended to confirm that an external thread meets the acceptance criteria without indicating minor deviations. This gauge, sized M76×3, checks the functional maximum material condition for a metric fine thread and is manufactured to DIN 13 with tolerance grade 6g. Using a dedicated ring gauge for pass/fail checks speeds up routine quality control and prevents unnecessary over‑interpretation of marginal readings; the result is a simple, objective decision at the shop floor level and a reduction in downstream sorting or rework. Built for durability and reproducibility in industrial use Constructed from hardened gauge steel, the ring retains form and accuracy under repeated use, offering a long service life even in busy inspection environments. The robust material and precision finishing reduce wear and maintain the functional gauge limits over time, so batch controls stay consistent and statistical control data remain meaningful. For production planners this translates into fewer process interruptions and more predictable throughput, improving overall equipment effectiveness without adding complexity to daily inspection routines. Traceability and conformity for documented quality systems Delivered complete with a calibration certificate, the gauge provides documented evidence of its measured status at dispatch, facilitating traceability within quality management systems. The supplied certificate supports audit trails and helps integrate the gauge into incoming inspection plans or first article inspections. The right‑hand, Go‑only ring form is intentionally simple to use and to record in logbooks, enabling clear acceptance records while complying with established thread standards for assemblies and components. Contact Metav Werkzeuge today to discuss integrating the Metav IndustryLine Go thread ring gauge M76×3 into existing inspection procedures and to request delivery and calibration details from our Emmerich location. Technical Data Article number: M315.776.8 GTIN: 4054469154497 Weight: 2 kg Material: hardened gauge steel Thread size: M76×3 Standard: DIN 13, 6g Facts Thread pitch: 3.0 mm Tolerance grade: 6g Right‑hand thread Tariff number: 90173000 Special features Delivered with calibration certificate Go (acceptance) ring gauge Designed for external metric ISO fine threads FAQ What is the intended use of this ring gauge? The ring gauge is intended for Go/pass acceptance testing of external metric ISO fine threads; the Go thread ring gauge M76×3 verifies whether threads meet the required maximum material condition. Does the gauge arrive calibrated? Yes, the gauge is supplied with a calibration certificate confirming its measured status at dispatch. Which standard and tolerance does the gauge follow? The gauge is manufactured to DIN 13 with tolerance grade 6g for metric fine threads. What material is the gauge made from? The ring is made from hardened gauge steel to provide durability and resistance to wear during repeated inspections. Is this gauge suitable for production control on large‑diameter threads? Yes; the M76×3 size is suitable for production and incoming inspection of large‑diameter metric fine threads where quick, repeatable acceptance checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x3 Thread Ring Gauge, Go/No-Go Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise reject testing, hardened construction and documented traceability for reliable thread quality control. The combination of a dedicated NO‑GO function and conformity to DIN 13, 6g supports consistent pass/fail decisions on metric ISO fine threads. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge NO‑GO M76 x 3.0 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread ring gauge NO‑GO M76 x 3.0 is a purpose‑built verification gauge for right‑hand metric ISO fine threads, intended for rapid go/no‑go inspection in production and incoming‑inspection processes NO‑GO thread gauge for M76 x 3.0 Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance 6g Reliable rejection control for metric fine threads The primary role of this gauge is unmistakable rejection control: the NO‑GO boundary checks whether an internal thread exceeds allowable size or form limits. Designed for M76 x 3.0 metric ISO fine threads, the instrument provides an immediate binary result that simplifies decision‑making on the shop floor. Conformity with DIN 13, 6g ensures the limit is industry‑recognised, while the documented calibration certificate preserves traceability and supports quality records. This rapid verification reduces inspection time and helps to avoid downstream assembly issues, contributing to a more efficient production flow. Durable, wear‑resistant construction for consistent results Manufactured from gauge steel, hardened, the gauge resists wear where contact is repetitive and forceful. The hardened material and careful finish maintain the gauging boundary over many cycles, which preserves accuracy and repeatability and lowers total cost of ownership compared with softer components. The robust construction also aids handling during repetitive checks, keeping the physical condition of the limit faces stable so that pass/fail indications remain reliable throughout extended inspection runs. Clear standards and documented traceability Measurement governance is central to quality assurance. The device is marked to the DIN 13 thread standard with tolerance class 6g, giving a clear technical reference for audit and process specification. Supplied with a calibration certificate, the gauge supports documented traceability and can be entered into calibration schedules. Where certificate evidence is required for compliance or customer audits, the supplied documentation reduces administrative effort and provides confidence that the instrument was verified before delivery. Choose Metav IndustryLine gauges for controlled thread inspection and contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for purchasing details and specialist advice Technical data SKU: M315.876.8 GTIN: 4054469154688 Weight: 2 kg Thread size: M76 x 3.0 Direction: Right‑hand Material: Gauge steel, hardened Standard: DIN 13, 6g Tariff number: 90173000 Facts Type: NO‑GO thread ring gauge Application: Verification of metric ISO fine threads Supplied with: Calibration certificate Intended use: Production inspection and incoming goods Category: Gauges / Thread gauges Special features Immediate go/no‑go indication Robust finish for long service life Suitable for repeat cycle inspection Traceability via supplied calibration documentation FAQ What does a NO‑GO thread ring gauge check? The NO‑GO ring checks whether an internal thread is oversize or out of tolerance; the NO‑GO condition on this M76 x 3.0 gauge indicates rejection under the DIN 13, 6g criteria. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate that documents the verification carried out prior to despatch. Which thread standard and tolerance class apply to this gauge? This ring is specified to DIN 13 with tolerance class 6g, suitable for metric ISO fine thread checks. What is the construction material and why does it matter? The gauge is made from hardened gauge steel, which reduces wear at the contact faces and ensures consistent inspection results over many cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x4 Thread Gauge Ring Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, Calib. Certificate, DIN 13 6g - Metav IndustryLine
Benefit from the combination of hardened gauge steel, DIN 13 (6g) tolerance and an included calibration certificate for reproducible reject testing and documented traceability. Order the no-go thread ring gauge M76 x 4.0 (metric ISO fine thread, right-hand) directly via Metav Werkzeuge or ask our consultants if needed. No-go thread ring gauge M76 x 4.0 — Metric ISO fine thread, right-hand, Metav IndustryLine A no-go thread ring gauge M76 x 4.0 for fast verification of oversize or out-of-tolerance threads in production environments; designed for repeatable reject testing of metric ISO fine threads in right-hand form. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Right-hand metric fine thread M76 x 4.0 Ensured rejection control where it matters The ring is intended as a dedicated no-go gauge to identify threads that exceed tolerance limits. Made from hardened gauge steel, the tool resists wear and maintains its functional limits over repeated use, ensuring that oversized threads are reliably detected before assembly or downstream processing. This reduces rework and protects assembly quality by preventing out-of-spec components from entering production. Standards, traceability and measurement confidence Manufactured to DIN 13 with a 6g tolerance class, the gauge supports standardised inspection procedures and aligns with common quality systems. A calibration certificate is included with delivery, providing documented traceability of the gauge’s status at the time of dispatch. The combination of standard conformity and documented calibration simplifies audit preparation and helps maintain consistent acceptance criteria on the shop floor. Practical handling and durability for workshop use The compact ring form, specified for a metric ISO fine thread M76 x 4.0 and right-hand orientation, is straightforward to use during incoming inspection and inline checks. The robust material choice reduces dimensional drift from handling, and the clear functional purpose—reject detection—keeps inspection routines simple and fast. Its design supports integration into regular quality workflows without specialised fixtures. Choose Metav IndustryLine ring gauges when reproducible reject verification and traceable calibration matter; contact Metav Werkzeuge for procurement and technical guidance from our Emmerich quality centre. Technical data SKU: M315.876.9 GTIN: 4054469155401 Tariff number: 90173000 Weight: 2 kg Core specifications Thread size: M76 x 4.0 Thread type: Metric ISO fine thread Tolerance class: 6g Orientation: Right-hand thread Features / Materials Material: Hardened gauge steel Function: No-go (reject) ring gauge Standard: DIN 13 Calibration: Supplied with calibration certificate FAQ What does "no-go" mean for this ring gauge? A no-go ring gauge is used to detect threads that are oversize or otherwise out of tolerance; the no-go thread ring gauge M76 x 4.0 indicates rejection when it fits the part. Is a calibration certificate included with the gauge? Yes, the ring gauge is supplied with a calibration certificate confirming its inspection status at delivery. Which standard does the gauge conform to? The gauge is manufactured to DIN 13 and specified to the 6g tolerance class for metric ISO fine threads. Can this gauge be used for left-hand threads? No, this model is specified for right-hand metric threads only; left-hand gauges must be selected separately. What material is the gauge made from and why does it matter? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability under repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x4 Thread Go Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise pass/fail control, a hardened gauge‑steel construction and a traceable calibration certificate for reliable production acceptance. Order the Go thread ring gauge directly via Metav Werkzeuge or consult the specialists for application support. Go thread ring gauge GUT M76 x 4.0 (right‑hand) — Hardened gauge steel, DIN 13, 6g The Go thread ring gauge GUT M76 x 4.0 is a right‑hand metric ISO fine‑thread gauge designed for routine acceptance testing and process control in production and inspection environments. Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Metric fine thread M76×4 right‑hand Supplied with calibration certificate Assured acceptance testing and process control Designed as a dedicated acceptance gauge, this ring provides unambiguous pass/fail decisions for external threads. The Go function permits a quick assessment of whether a manufactured external thread meets the DIN 13, 6g tolerance class; if the part enters the ring smoothly and without play, the thread is classified as acceptable. This reduces subjective judgement, shortens inspection time and supports inline quality control. For production planners, the clear binary result streamlines sampling plans and helps control scrap rates and rework. Robust construction for shop‑floor durability Manufactured from hardened gauge steel, the ring resists wear from repeated engagement and retains dimensional stability under normal workshop conditions. The material choice and heat treatment ensure a long service life, maintaining the calibrated limit geometry across many cycles. Where tool life and reproducible measurements matter, the combination of hardened substrate and proper handling reduces replacement frequency and contributes to stable process capability indexes. Traceable calibration and documentation for quality systems The ring is supplied with a calibration certificate, documenting the verification of key dimensions and traceability to national standards. This evidence supports inspection routines, internal audits and customer quality requirements without additional calibration steps before first use. The documented check enables seamless integration into inspection records and supports traceability demands within ISO 9001 or similar quality management frameworks. Practical fitment and use in inspection workflows The ring is specified as M76 x 4.0, right‑hand, making it suitable for checking metric fine threads to that nominal size. As a Go‑type thread ring, it is intended to verify external thread conformity; the presence of the dial or quick‑check on an inspection table allows rapid throughput checks during production pauses or final inspection. When combined with a systematic acceptance procedure, the gauge contributes to faster decision‑making and fewer nonconforming shipments. For assured thread inspection and documented calibration, request supply and application advice from Metav Werkzeuge in Emmerich — the partners for practical metrology solutions. Technical data Article number: M315.776.9 GTIN: 4054469155227 Description: Go thread ring gauge GUT M76 x 4.0, right‑hand Facts Thread size: M76 x 4.0 Tolerance/class: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Materials and features Material: gauge steel, hardened Gauge type: Go (GUT) Supplied with calibration certificate Category: Gauges / Thread gauges FAQ What does GUT mean for this ring gauge? GUT denotes the Go gauge function; the Go thread ring gauge GUT M76 x 4.0 checks whether an external thread meets the acceptance limit for the specified tolerance class. Is a calibration certificate included with the gauge? Yes, the ring is delivered with a calibration certificate that documents measured characteristics and provides traceability for inspection records. Can this gauge be used on left‑hand threads? No, this ring is manufactured for right‑hand threads only; use a purpose‑made left‑hand ring for left‑hand thread inspection. Which standard does the gauge conform to? The gauge is specified to DIN 13 with tolerance class 6g, suitable for metric ISO fine threads in that class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x4 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Combining hardened gauge steel construction, an M76×4 ISO fine‑thread form and conformity with DIN 13, 6H, this calibrated thread plug gauge provides reliable verification of right‑hand metric threads; order directly via Metav Werkzeuge or consult our technical advisers for application guidance. Thread plug gauge M76×4 — right‑hand, DIN 13 (6H) — Metav IndustryLine A thread plug gauge M76×4 for precise inspection of right‑hand metric ISO fine threads in production and incoming inspection. Hardened gauge steel construction Designed for M76×4 metric fine threads Conforms to DIN 13, 6H Supplied with calibration certificate Consistent verification for metric fine threads For production control and incoming inspection, a dedicated plug gauge is the most efficient means of checking metric ISO fine threads for functional conformity. The geometry specified by DIN 13 and the tolerance class 6H translate into a clear pass/fail decision during routine checks, reducing downtime caused by ambiguous measurements. Using a purpose‑made plug gauge streamlines quality workflows by enabling fast, repeatable checks without additional measurement devices. Robust build for long service life A gauge made from hardened gauge steel resists wear under frequent engagement and provides consistent contact geometry over many cycles. The selected material and heat treatment preserve the thread profile and minimise dimensional drift, which benefits serial inspections and on‑shopfloor use. Where mechanical handling and rapid throughput matter, the durable construction helps maintain inspection accuracy and reduces the need for frequent replacements. Traceable calibration to support quality systems This tool is supplied with a calibration certificate, ensuring traceability of results and simplifying documentation for quality audits. The certificate documents the measured characteristics at delivery and supports integration into existing inspection procedures and quality management systems. Traceable calibration aids compliance and gives confidence during audits or supplier assessments. Practical integration into workshop processes Designed for verification of right‑hand metric fine threads in components and assemblies, the gauge fits standard inspection benches and control stations. Typical applications include incoming inspection of threaded parts, inline checks during assembly and spot checks on finished components. The compact form factor and clear conformity to established standards make the gauge a practical element in both manual and semi‑automated inspection routines. For reproducible thread inspection choose Metav IndustryLine’s calibrated M76×4 plug gauge — contact Metav Werkzeuge for tailored advice or to place an order at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M315.676.9 GTIN: 4054469155043 Manufacturer: Metav IndustryLine Facts Size: M76×4 Weight: 2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, 6H Right‑hand metric ISO fine thread form Calibration certificate included FAQ What thread form and tolerance does this gauge check? The gauge checks right‑hand metric ISO fine threads to the DIN 13 specification with tolerance class 6H, suitable for functional verification of M76×4 threads. Is the plug gauge delivered calibrated? Yes, the tool is supplied with a calibration certificate, which documents the measured characteristics at delivery and supports quality documentation for Metav IndustryLine gauges. What material is the gauge made from and how durable is it? Manufactured from hardened gauge steel, the gauge is designed for frequent engagement and maintains the thread profile under repetitive use, ensuring long service life. Where is this plug gauge typically used? Common applications include incoming inspection, shopfloor spot checks and inline verification within assembly processes where M76×4 metric fine threads must be confirmed. Which article number should be referenced when ordering or requesting documentation? Please reference article number M315.676.9 (Metav IndustryLine) when enquiring about specifications or ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x6 Go Thread Plug Gauge For Metric ISO Fine Thread, Right-Hand, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust inspection solution that combines precise thread checking, hardened gauge steel and a supplied calibration certificate for reliable production control — order the plug gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread plug gauge (no‑go) M76 x 6.0 — hardened gauge steel, DIN 13, 6H (Metav IndustryLine) Thread plug gauge (no‑go) M76 x 6.0 for verification of metric ISO fine threads in production and inspection environments No‑go thread plug gauge M76 x 6 Hardened gauge steel for durability Supplied with calibration certificate Precise thread control for repeatable quality The no‑go thread plug gauge M76 x 6.0 is designed for clear go/no‑go assessment of metric ISO fine threads. As a dedicated no‑go (reject) plug, it provides an unambiguous check that threads exceed the maximum acceptable profile; this simplifies in‑process inspection and prevents out‑of‑tolerance parts from progressing down the line. Using a dedicated gauge for the reject condition reduces interpretation errors and speeds up routine checks, supporting a consistent quality flow. Robust construction that keeps measurements stable Manufactured from hardened gauge steel, the plug gauge resists wear and maintains its profile under frequent use, which preserves measurement reliability over time. The design conforms to DIN 13, 6H, ensuring compatibility with standard metric fine‑thread tolerances and facilitating traceable comparisons across batches. The right‑hand thread orientation matches common production threads, while the solid material choice reduces the need for frequent replacements, lowering total cost of ownership through extended service life. Supplied calibration for documented conformity This gauge is supplied with a calibration certificate, documenting the inspection status at delivery and supporting internal quality records. The certificate verifies the dimensional conformity of the plug and enables integration into quality control protocols and audit trails. A documented calibration reduces uncertainty during acceptance and simplifies compliance with internal inspection standards and customer specifications. Practical fit for shopfloor and inspection benches The plug gauge is intended for straightforward use in machine shops, toolrooms and incoming inspection stations where rapid thread checks are required. Its clear pass/fail function makes it suitable for production line checks as well as final inspection of assemblies and components. The compact, single‑piece design facilitates rapid handling and minimises measurement variation introduced by setup, helping teams to maintain throughput without sacrificing inspection rigour. For procurement and technical guidance on the Metav IndustryLine no‑go plug gauge M76 x 6.0, contact Metav Werkzeuge in Emmerich for reliable supply and expert advice. Technical data SKU: M315.676.A GTIN: 4054469155661 Thread size: M76 x 6.0 Applicable standard: DIN 13, 6H Tariff number: 90173000 Facts Weight: 2 kg Type: No‑go (reject) plug gauge Handedness: Right‑hand thread Special features Material: hardened gauge steel Supplied with calibration certificate Category: Gauges / Plug gauges FAQ What does "no‑go" mean for a thread plug gauge? A no‑go plug gauge is used to check that an internal thread does not exceed the maximum permissible form; if the no‑go gauge enters, the thread is out of tolerance. The Metav IndustryLine no‑go plug gauge M76 x 6.0 is specifically made for this reject check. Is the gauge compatible with standard metric fine threads? Yes. The plug gauge is manufactured to DIN 13, 6H tolerances and is suitable for verifying metric ISO fine threads of the specified size. Does the product arrive calibrated? The gauge is supplied with a calibration certificate, confirming its measured condition at delivery and supporting traceability in quality documentation. Can the gauge be used in a production environment for frequent checks? Yes. Constructed from hardened gauge steel and designed as a compact plug gauge, it is suitable for regular shopfloor checks and final inspections where rapid go/no‑go decisions are required. How should the gauge be stored to preserve accuracy? Store the plug gauge dry and protected from impact and corrosion; periodic re‑calibration should be scheduled according to the inspection interval appropriate for usage frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x6 Thread Gauge, ISO Metric Fine Right-Hand, Cast-Off With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of a hardened gauge steel construction, the DIN 13 / 6g tolerance class and the supplied calibration certificate to secure reproducible pass/fail decisions at the inspection stage. Order this calibrated NO‑GO thread ring directly via Metav Werkzeuge or consult our specialists for batch inspections and traceability options. Thread ring gauge NO‑GO M76 x 6.0 — NO‑GO metric ISO fine thread inspection ring, right‑hand The Thread ring gauge NO‑GO M76 x 6.0 is a right‑hand NO‑GO inspection ring for metric ISO fine threads, designed for shop‑floor verification and quality control to DIN 13 tolerance class 6g. NO‑GO ring for metric ISO fine threads Hardened gauge steel for long service life Supplied with calibration certificate Right‑hand thread, DIN 13, 6g Consistent pass/fail decisions reduce downstream rejects A dedicated NO‑GO ring provides a clear, binary inspection result that prevents marginal parts entering assembly. Manufactured from hardened gauge steel, the ring retains its profile under repeated use, so dimensional drift is minimised and measurement drift is reduced. The adherence to DIN 13 and tolerance 6g ensures compatibility with standard metric fine threads, which streamlines acceptance criteria and simplifies supplier communication. The practical outcome is fewer scrapped assemblies and a tighter production yield. Durable design that keeps inspection intervals predictable The construction and finish prioritise repeatability: the hardened material and robust profile reduce wear, keeping the gauge within tolerance for longer intervals between re‑calibrations. At roughly 2 kg in mass, the ring is substantial enough to feel stable during handling while remaining manageable for routine checks. A NO‑GO variant like this one flags over‑sized or incorrectly formed threads immediately, supporting fast in‑line decisions and reducing time lost to ambiguous measurements. Traceable calibration meets audit and quality‑system needs This ring is supplied with a calibration certificate, providing documented evidence of conformity at the time of delivery and supporting quality‑system traceability. The certificate facilitates internal audits and makes it straightforward to include the gauge in a calibration schedule. Where process control and documentation matter, this feature lowers the administrative burden associated with proving instrument status and supports consistent product acceptance across batches. Secure measured assurance with the Metav IndustryLine NO‑GO thread ring — contact Metav Werkzeuge to arrange supply, calibration scheduling or batch verification services Technical data Article number: M315.876.A GTIN: 4054469155920 Material: Gauge steel, hardened Size: M76 x 6 Direction: Right‑hand Standard: DIN 13, 6g Weight: 2 kg Included: Calibration certificate Facts Nominal size: M76 x 6 Tolerance class: 6g Weight: 2 kg HS code: 90173000 Special features NO‑GO function for reject verification Supplied calibrated (calibration certificate included) Robust, hardened gauge steel construction Right‑hand, metric ISO fine thread FAQ What is the primary use of this gauge? The thread ring gauge NO‑GO M76 x 6.0 (Metav IndustryLine, SKU M315.876.A) is used to verify that metric ISO fine threads do not exceed the maximum acceptable major diameter and profile; it gives a definitive reject indication when a NO‑GO condition is encountered. Is the gauge supplied calibrated? Yes — the ring is delivered with a calibration certificate that documents its measured condition at delivery and supports traceability in quality systems. What does NO‑GO mean in practical terms? A NO‑GO ring is intended to detect oversize or out‑of‑tolerance threads; the gauge must not pass onto a part that meets the master limit, so a pass on the NO‑GO indicates a reject condition. Which thread standard and tolerance does the ring conform to? The ring is manufactured to DIN 13 with tolerance class 6g, matching metric ISO fine thread specifications for right‑hand threads. What material is used and what are the benefits? Made from hardened gauge steel, the ring resists wear and preserves the inspection profile for extended service life, reducing re‑calibration frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x6 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of the combination of traceable calibration, hardened gauge steel and DIN‑specified tolerance to ensure reliable thread verification and consistent production acceptance. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Ring Gauge Go M76×6.0 — Metric ISO fine thread gauge, DIN 13 (6g) — Metav IndustryLine The Thread Ring Gauge Go M76×6.0 is a hardened, right‑hand ring gauge designed for fast verification of metric ISO fine‑thread profiles in inspection stations and quality control workflows. Hardened gauge steel construction Metric ISO fine thread M76×6 Tolerance DIN 13, 6g Supplied with calibration certificate Reliable thread verification for production control The ring gauge provides immediate Go/No‑Go assessment of fine threads, enabling rapid acceptance checks on machined parts. Constructed from hardened gauge steel, the device resists wear and retains form over repeated cycles, which reduces measurement drift and the risk of false rejects. The M76×6 dimension and DIN 13 (6g) tolerance ensure compatibility with standardised metric fine‑thread components, simplifying in‑line inspection and supplier incoming checks. Traceable calibration for audit readiness Delivered with a calibration certificate, the gauge offers documented traceability for quality systems and audit trails. The supplied certificate records the inspection status at delivery, supporting process validation and batch release procedures. Where documented verification is required, the presence of a calibration record shortens administrative follow‑up and strengthens conformity evidence for internal and external audits. Durable design for repeatable measurements A right‑hand Go ring in hardened gauge steel combines mechanical robustness with dimensional stability, keeping periodic re‑verification intervals longer and maintenance demands lower. The solid construction promotes reproducible seating and tactile feedback during checks, which helps maintain consistent assessment across different operators and shifts. This stability contributes directly to lower scrap rates and more predictable quality outcomes. Fast integration into inspection routines The gauge is ready for immediate use in standard inspection jigs and handheld checks, reducing setup time on the shop floor. Its standardised thread profile and tolerance class facilitate straightforward documentation in inspection plans and quality control sheets. By providing a compact, precise checking tool, the gauge supports efficient process control and quicker decision‑making within production and assembly environments. For traceable thread verification with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.776.A GTIN: 4054469155791 Tariff code: 90173000 Weight: 2 kg Facts Thread size: M76×6 Tolerance: 6g Standard: DIN 13 Right‑hand thread Special features Material: hardened gauge steel Type: Go ring gauge Supplied with calibration certificate Brand: Metav IndustryLine FAQ What is the intended use of this gauge? The Thread Ring Gauge Go M76×6.0 is intended for rapid Go/No‑Go verification of metric ISO fine threads to DIN 13 (6g) in inspection and incoming goods environments. Is a calibration certificate included with delivery? Yes, the gauge is supplied with a calibration certificate that documents the measured condition at delivery for audit and quality records. Which material is the gauge made from? The gauge is manufactured from hardened gauge steel, chosen for wear resistance and dimensional stability in repeated inspection cycles. Can the gauge be used for right‑hand and left‑hand threads? This item is a right‑hand Go ring specifically produced for standard right‑hand metric ISO fine threads; left‑hand variants must be ordered separately. Which standard and tolerance class does the gauge conform to? The ring gauge conforms to DIN 13 with a tolerance class of 6g, suitable for metric ISO fine‑thread verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76x6 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and DIN‑compliant 6H tolerance to secure fast, reliable go/no‑go checks on metric fine threads; the tool is supplied with a traceable calibration certificate for quality assurance. Order the thread plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M76 x 6 (Go) — right‑hand, DIN 13 6H — Metav IndustryLine Thread plug gauge GUT M76 x 6 provides a calibrated Go check for right‑hand metric ISO fine threads, suitable for production and incoming inspection. Calibrated with certificate included Hardened gauge steel construction DIN 13, tolerance 6H Go gauge for right‑hand threads Fast, reliable verification for threaded production The Go gauge concept enables a straightforward pass/fail decision during serial inspection, reducing sorting time and preventing rejected lots from progressing through production. For an M76 x 6 metric fine thread the gauge confirms conformity to DIN 13 with a 6H tolerance class, so measurements are meaningful within established ISO limits. The compact, single‑piece design simplifies handling on the shop floor and supports consistent cycle times during quality control. Traceable calibration that supports quality systems Delivered with a calibration certificate, the gauge offers documented traceability for audits and internal quality records. The supplied certificate records the inspection status at delivery and assists traceability without additional administrative effort. Because the master is supplied calibrated, integration into existing inspection processes or quality control plans is immediate, supporting compliance objectives and reducing start‑up time for new batches. Robust build for repeatable go/no‑go checks Manufactured from hardened gauge steel, the plug gauge resists wear under regular use and maintains functional limits over a long service life. The right‑hand geometry and precise thread profile are produced to ensure repeatable engagement with internal threads, reducing measurement uncertainty during quick verification tasks. Routine care — gentle cleaning and light oiling — will extend service life and preserve the defined limits for dependable inspection. For traceable, workshop‑ready thread inspection and advice on fitment, contact Metav Werkzeuge for supply and technical consultation on Metav IndustryLine gauges. Technical Data SKU: M315.576.A GTIN: 4054469155531 Weight: 2 kg Description: Thread plug gauge, Go (GUT), right‑hand Material: hardened gauge steel Thread size: M76 x 6 Norm: DIN 13, 6H Tariff number: 90173000 Calibration: calibration certificate included Facts Thread dimension: M76 x 6 Tolerance class: 6H Weight: 2 kg GTIN: 4054469155531 Tariff number: 90173000 ECLASS: 21170228 Special features Go gauge (GUT) for go/no‑go verification Right‑hand metric ISO fine thread application Delivered with calibration certificate Hardened gauge steel for wear resistance Conforms to DIN 13, 6H FAQ What thread standard and size does this gauge check? The Thread plug gauge GUT M 76 x 6 checks metric ISO fine threads sized M76 x 6 and is manufactured to the DIN 13 specification with a 6H tolerance. Is the gauge delivered calibrated? Yes — the plug gauge is supplied with a calibration certificate confirming its inspection status at delivery and enabling immediate use in quality documentation. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which provides wear resistance and maintains the defined limits for repeatable go/no‑go checks during production inspection. For which inspection tasks is this plug gauge intended? Designed for quick pass/fail verification, the gauge is suited to production control, incoming inspection and any application that requires rapid confirmation of internal thread conformity to the specified M76 x 6 profile. How should the gauge be maintained to ensure longevity? After use, clean the gauge to remove debris, apply a light protective oil film and store in a dry place; regular visual checks will help detect wear before limits are exceeded. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76×1.5 Thread Go Ring For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6g, Calib. Certificate - Metav IndustryLine
Take advantage of a precision tool that combines hardened gauge steel construction with conformity to DIN 13 (6g) and a supplied calibration certificate; this ring gauge supports reliable thread verification and stable quality control. Order the ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge GUT M76×1.5 — metric ISO fine thread gauge, right-hand, DIN 13 (6g) A thread ring gauge GUT M76×1.5 for rapid verification of metric ISO fine external threads in production and inspection environments. For ISO fine thread M76×1.5 Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, tolerance class 6g Consistent thread conformity for fewer rejects The ring gauge delivers repeatable verification of external threads in accordance with DIN 13 (6g), ensuring that threaded parts meet specification before assembly or shipment. Manufactured from hardened gauge steel, the tool resists wear and preserves the inspection geometry over time, which reduces the need for frequent requalification and lowers process-related scrap rates. The right‑hand thread form matches common metric fine-threaded components for direct, no-fuss checks on production lines and in incoming goods control. Built for traceability and process integration Delivered with a calibration certificate, the gauge provides documented evidence of measurement conformity suitable for quality records. The compact design and solid construction allow simple handling during routine checks; the tool’s M76×1.5 designation and DIN 13 conformity make it straightforward to integrate into existing inspection plans. As a stable reference, the calibratable ring gauge supports consistent decision-making at the control station and helps maintain stable process capability indices. Practical application and user advantage Used as a reference during first-article inspection, batch sampling or final acceptance, the gauge enables fast pass/fail assessment without the need for complex measurement systems. The robust material selection minimises distortion during use while the clear designation streamlines documentation and traceability. This durability translates into cost-effective lifetime performance and predictable maintenance intervals, supporting uninterrupted production and reliable delivery performance. Suitable environments and procurement reassurance The ring gauge is appropriate for machine shops, component suppliers and quality departments that require straightforward conformity checks for metric ISO fine threads. Supplied by a recognised precision partner, the tool benefits from a European supply chain and accessible aftercare. The combination of hardened material, standardised tolerance class and an issued calibration certificate makes the gauge a practical addition to quality toolkits focused on repeatability and compliance. Contact Metav Werkzeuge to acquire this Metav IndustryLine thread ring gauge with calibration certificate and to confirm compatibility with specific production or inspection workflows Technical Data Article number: M315.776.6 GTIN: 4054469152639 Designation: Thread ring gauge GUT M76×1.5 Material: Gauge steel, hardened Standard: DIN 13, tolerance class 6g Label: Gewinde-Lehrring GUT M 76 X 1,5 für metrisches ISO-Feingewinde, rechts Facts Weight: 2 kg ECLASS: 21170214 Customs tariff number: 90173000 Special features Delivered with calibration certificate Right-hand thread form Category: Messstifte, Lehren Suitable for metric ISO fine threads FAQ What thread size and pitch does the gauge check? The ring gauge checks metric ISO fine threads with the designation M76×1.5 and is manufactured for that specific pitch and diameter. Is the gauge supplied with any calibration documentation? Yes, the thread ring gauge GUT M76×1.5 is supplied with a calibration certificate, providing traceable documentation for quality records. Which tolerance class does the gauge represent? The gauge conforms to DIN 13 with tolerance class 6g, suitable for standard production verification of metric fine threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to prolong service life and preserve inspection accuracy. Can this gauge be used for left-hand threads? No, this specific item is produced for right-hand metric ISO fine threads; left-hand threads require a dedicated left-hand gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M76×4 Thread Ring Gauge Right-Hand Metric ISO Fine Thread DIN 13 6H, Calibrated Certificate Included - Metav IndustryLine
Take advantage of precise GO/NO‑GO verification, hardened gauge steel construction and an included calibration certificate to speed up thread inspection and reduce scrap. Order the calibrated gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GO M76 x 4.0 — plug gauge for M76×4 ISO fine threads (right-hand), Metav IndustryLine The Thread plug gauge GO M76 x 4.0 is a hardened plug gauge designed for fast verification of right‑hand metric ISO fine internal threads in production and incoming inspection. Hardened gauge steel construction Calibrated with certificate included Complies with DIN 13, 6H For right‑hand M76×4 fine threads Fast, standards‑compliant thread acceptance that keeps the line moving The gauge offers an immediate pass/fail decision for internal threads, enabling rapid quality checks on production batches and incoming parts. Built to DIN 13, 6H, this GO plug supports compliance with common international tolerances and simplifies the inspection routine; by using a dedicated go gauge for the nominal M76×4 size, operators can confirm dimensional conformity without time‑consuming measurements. The result is lower inspection times and a more consistent throughput in machining and assembly processes. Durable construction for reliable, repeatable inspection Manufactured from hardened gauge steel, the plug is engineered for wear resistance and dimensional stability under repeated use. The robust material choice and hardened finish reduce wear‑in effects, supporting repeatable measurements over long service intervals and lowering the need for frequent replacements. As a hardened plug gauge, it is intended for regular shop‑floor verification where mechanical resilience matters and measurement uncertainty must be minimised. Traceable calibration for documented quality assurance Delivered with a calibration certificate, this plug gauge provides documented traceability for quality systems and audits. The certificate confirms that the gauge was checked and recorded before dispatch, supporting internal quality records and customer requirements for traceability. For production environments that mandate recorded verification of gauges prior to first use, the supplied documentation removes an administrative step and accelerates commissioning of inspection equipment. Contact Metav Werkzeuge to acquire the calibrated Metav IndustryLine M76×4 GO plug gauge and ensure thread verification is traceable and production‑ready at your facility Technical data Article number: M315.576.9 GTIN: 4054469154862 Weight: 2 kg Material: Gauge steel, hardened Thread size: M76×4 Norm: DIN 13, 6H Facts Nominal thread: M76 Thread pitch: 4.0 mm Tariff number: 90173000 Right‑hand thread GO gauge type Special features Calibrated; calibration certificate included Designed for production and incoming inspection Durable, hardened construction Suited for metric ISO fine internal threads Category: Plug gauge / thread inspection FAQ What does the GO marking indicate for this plug gauge? The GO designation means the plug is the acceptance gauge for the nominal internal thread — if the Thread plug gauge GO M76 x 4.0 enters the internal thread without interference, the thread meets the required minimum material and form for the specified M76×4 standard. Is a calibration certificate supplied with the gauge? Yes, the gauge is delivered with a calibration certificate confirming inspection before dispatch. Which standard does the gauge conform to? The plug gauge is manufactured to DIN 13, 6H, suitable for metric ISO fine internal thread verification. Can this plug gauge be used for both production and final inspection? Yes, the robust construction and supplied calibration certificate make the gauge appropriate for routine production checks and documented quality inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com