Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
11.07mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Combining workshop-grade robustness, a precise diameter of 11.07 mm and a tight tolerance of ±0.002 mm, this gauge pin delivers repeatable end‑measurement checks in routine inspection. Benefit from the compact 50 mm length for stable handling and reliable seating in test fixtures. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisors for integration guidance. Gauge pin, single, 11.07 mm Ø — 50 mm length (Metav IndustryLine) A Gauge pin, single, 11.07 mm Ø, 50 mm length designed for workshop end‑measurements and reference checks where consistent seating and high repeatability are required Workshop version, robust manufacture Diameter precisely 11.07 mm for end measurements Tolerance ±0.002 mm for repeatable checks 50 mm length for stable handling in fixtures Repeatable measurement performance for shopfloor control The pin is engineered for consistent dimensional checks: the 11.07 mm nominal diameter combined with a verified ±0.002 mm tolerance reduces measurement scatter and supports rapid go/no‑go decisions. Manufactured for routine inspection tasks, the component offers a compact form factor that minimises leverage and vibration during seating, which in turn lowers reading variation on comparators or bench gauges. This focus on quantifiable stability makes the part ideal where traceable, repeatable checks are required. Durable workshop construction that sustains accuracy Built from special steel, the pin is specified as a workshop version to withstand frequent handling and contact with inspection fixtures. The selection of material and the controlled manufacture provide resistance to wear while preserving the nominal diameter over many cycles, helping to maintain the declared ±0.002 mm accuracy. The 50 mm length presents a practical balance between reach and stiffness, ensuring easy use in small fixtures and test benches without compromising straightness or seating quality. Practical integration into inspection procedures As a compact reference pin, this component is suited to assembly-line verification, fixture set‑up and end‑measurement routines where space is limited and speed matters. Its size and tolerance simplify jigs and fixture design because the pin provides a clearly defined datum for repeat measurements. Combined with systematic handling and storage, the robust construction enables a long service life and dependable reference values for daily quality control. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine gauge pin in inspection workflows — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.B07 GTIN: 4061905063794 Label: Gauge pin, single, 11.07 mm Ø, 50 mm length Brand: Metav IndustryLine Measurements Diameter: 11.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop version Application: End measurements FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, providing tight control for routine end‑measurement tasks on the shopfloor. Is the pin suitable for continuous workshop use? Yes — the Metav IndustryLine workshop version is manufactured from special steel and designed for frequent handling and seating in fixtures. Which measurements does the component support? The item serves as a reference for end‑measurements, offering a nominal diameter of 11.07 mm and a length of 50 mm for stable seating and repeatable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.08mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining ±0.002 mm accuracy with a robust special steel construction and a compact 50 mm length, this gauge pin delivers reproducible end‑size verification in workshop environments. Order the part directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin, single — 11.08 mm Ø / 50 mm length (Metav IndustryLine) A gauge pin designed as a compact reference for end‑size checks and fixture set‑up in fine‑mechanical and workshop environments ±0.002 mm measurement accuracy Special steel for high wear resistance 11.08 mm reference diameter for end‑size checks 50 mm length for compact fixture use Reproducible precision for fine workpieces The compact reference pin is manufactured for repeatable dimensional checks where precision is decisive. With a nominal diameter of 11.08 mm and an accuracy of ±0.002 mm, the pin serves as a reliable standard for end‑size control and pass/fail verification. This level of tolerance minimises rework and secures process stability in batch inspections. The short 50 mm length keeps the pin torsion‑resistant and easy to seat in fixtures, supporting consistent contact conditions and dependable measurement results. Built for workshop routines and minimal downtime As a workshop version, the pin combines robustness with straightforward handling to speed up frequent checks. Produced from special steel, it resists surface wear under repeated seating, which extends service intervals and reduces replacement frequency. Supplied in a transport case, the item stays protected during storage and transit, helping to preserve the calibrated datum surface and cutting setup time on the shop floor. The low mass and compact form factor facilitate quick alignment in jigs and gauges without cumbersome handling. Practical applications and measurement context Classified within the Micro class for gauges, this reference pin is tailored to fine mechanical tasks such as bore verification, fixture set‑up and end‑size measurement of small components. The stated tolerance corresponds to high‑precision inspection tasks where dimensional deviations of a few micrometres are relevant; the specification therefore supports quality control regimes that aim to reduce scrap and ensure interchangeability. The design is suitable for rapid comparative measurements and integration into routine inspection sequences in toolrooms and production cells. Secure workshop accuracy with the Metav IndustryLine gauge pin — contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.B08 GTIN: 4061905063800 Brand: Metav IndustryLine Type: Gauge pin, single Dimensions & accuracy Diameter: 11.08 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: special steel Workshop version Delivered in transport case Category: gauge pins FAQ What is the measurement tolerance of the M323.B08 gauge pin? The M323.B08 gauge pin is specified with an accuracy of ±0.002 mm, suitable for high‑precision end‑size checks and fine inspection tasks. Which material is used for this reference pin? The reference pin is made from special steel, chosen for wear resistance and stable contact properties during repeated seating. How is the item supplied for transport and storage? The gauge pin is supplied in a transport case, protecting the datum surfaces and easing safe storage and handling between uses. For which applications is this compact pin recommended? This compact pin is ideal for end‑size verification, fixture set‑up and bore checking in workshop and toolroom environments requiring micro‑level precision. Does the pin support quick fixture alignment? Yes — the 50 mm length and compact geometry are designed for easy seating in jigs and fast alignment during setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.09mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precise workshop measurement with a compact, high-tolerance pin made from special steel, combining repeatable dimensional checks and robust handling for reliable production control. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.B09 — 11.09 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for end-measure reference and inspection tasks in workshop environments, offering a compact format for precise dimensional verification. Workshop version, robust design Diameter 11.09 mm, tolerance ±0.002 Length 50 mm for end-measure checks Supplied in protective transport case High-precision measurement that suits routine inspection This compact inspection pin delivers a diameter of 11.09 mm with an indicated tolerance of ±0.002 mm, making it ideal where small, repeatable deviations must be detected quickly. The tight tolerance supports efficient quality control workflows by reducing rework and shortening inspection loops. Classified in the micro range for calipers and pins, the format combines close-range reach with the stiffness required for consistent contact measurements. The result is a reliable reference that helps maintain production stability and traceable dimensional checks. Built for workshop durability and straightforward handling Manufactured in special steel and presented in a workshop version, the pin resists wear from frequent contact and offers consistent surface integrity over many cycles. A 50 mm overall length gives sufficient end-measure reach for common assemblies without compromising rigidity, while the compact design eases handling during batch inspection or spot checks. Supplied in a protective transport case, the component arrives ready for immediate use and controlled storage, limiting damage during transit and simplifying inventory management in busy shops. Integration into inspection routines and practical benefits As a single gauge pin, this item supports dimensional reference tasks such as end-face checks and small-bore verification, complementing existing inspection kits and plug gauge sets. The straightforward geometry minimises interpretation effort: a direct contact reading from a calibrated micrometer or comparator delivers a clear result. For workshops aiming to tighten process tolerances, installing compact, high-tolerance references like this pin reduces ambiguity in go/no-go decisions and helps operators achieve consistent quality without extensive training. For tailored advice on incorporating the Metav IndustryLine gauge pin M323.B09 into production checks, contact Metav Werkzeuge in Emmerich to discuss suitability and delivery options Technical data SKU: M323.B09 GTIN: 4061905063817 Category: Gauge pins Label: Prüfstift, einzeln, 11,09 mm Länge 50 mm Facts Diameter: 11.09 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in protective transport case FAQ What is the intended use for this gauge pin? The gauge pin M323.B09 is intended for end-measure reference and dimensional checks in workshop inspection tasks, suitable for small-bore and end-face verification. What level of accuracy does the pin offer? The inspected tolerance is ±0.002 mm, providing high-repeatability checks for routine quality control. Is the pin ready for immediate use upon delivery? The gauge pin is supplied in a protective transport case and delivered ready for integration into inspection routines. Which material is used for the pin and what does that mean for wear resistance? Constructed from special steel, the pin offers improved surface integrity and wear resistance for repeated contact measurements. Can this pin be combined with existing gauge sets? Yes, the compact format and standard geometry make the pin compatible as a reference within existing inspection kits and plug gauge assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.0mm Limit Plug Gauge, DIN 2245 H7, Hardened Gauge Steel - Metav IndustryLine
Benefit from hardened gauge steel construction and strict DIN 2245 H7 tolerance for fast, repeatable Go/No‑Go checks in production. Order the limit plug gauge M314.011 directly via Metav Werkzeuge or ask our consultants if needed. Limit plug gauge M314.011 (11.0 mm, DIN 2245 H7) — Metav IndustryLine The limit plug gauge M314.011 is a precision gage pin engineered for rapid Go/No‑Go inspection of cylindrical bores in machining and assembly environments. Hardened gauge steel for durable use Conforms to DIN 2245, tolerance H7 Exact 11.0 mm diameter calibration Ideal for rapid Go/No‑Go inspection Precision where it matters for production control A compact inspection tool, this gauge is designed to deliver consistent pass/fail decisions at the point of operation. The adherence to DIN 2245 and the specified H7 tolerance ensure the pin represents the intended limit state of a bore; this removes ambiguity from visual checks and caliper comparisons. Using a calibrated limit pin speeds up repetitive checks, reduces measurement variability and allows quality personnel to focus on corrective actions rather than measurement debates. The result is a measurable reduction in inspection time and a clear, binary decision that supports efficient process control. Built to withstand routine workshop demands Made from hardened gauge steel, the pin resists wear from frequent insertion and withdrawal, maintaining dimensional integrity over many cycles. The material choice balances hardness with resistance to brittle failure, making the gauge suitable for continuous use on the shop floor. Where traceability and inventory management matter, the robust construction minimises rework and replacement frequency, contributing to lower lifetime costs and higher uptime. Regular visual checks for surface damage and clean handling will preserve the tool’s service life and repeatability. Straightforward integration into inspection workflows The limit plug functions as a quick Go/No‑Go reference that complements dial indicators, bore gauges and CMM processes. When used as a first-line control, it identifies out-of-tolerance bores before parts proceed to assembly, reducing downstream rejects. The compact form factor simplifies storage in tool drawers or inspection kits and allows use in confined fixtures. For documentation and traceability, the item is supplied with clear identification (SKU M314.011 and GTIN), easing stock control and audit trails in production and quality systems. Contact Metav Werkzeuge today to request application advice or to arrange supply of the Metav IndustryLine limit plug gauge M314.011 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M314.011 GTIN: 4054469121406 Manufacturer: Metav IndustryLine Material: Lehrenstahl, gehärtet Norm: DIN 2245 Facts Diameter: 11.0 mm Tolerance: H7 Tariff code: 90173000 ECLASS: 21170218 Special features Go/No‑Go limit plug for bore inspection Hardened gauge steel for wear resistance Conforms to DIN 2245 standard Category: Messstifte / Lehren FAQ What is the primary use of this limit plug gauge? The limit plug gauge M314.011 from Metav IndustryLine is used for quick Go/No‑Go checks of cylindrical bores to verify conformity with a specified H7 tolerance. Which standard does the gauge comply with? Compliance with DIN 2245 and the H7 tolerance is specified for the limit plug gauge M314.011 to ensure consistent inspection results. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened gage steel, chosen to provide wear resistance and stable dimensions under frequent use in workshop inspection routines. How is the item identified for inventory and traceability? The limit plug gauge is listed under SKU M314.011 and GTIN 4054469121406, which supports stock control and audit requirements Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.11mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Benefit from the combination of accurate diameter control (11.11 mm) with a tight ±0.002 mm tolerance and a robust special steel construction for consistent inspection results in workshop environments. Order the M323.B11 gauge pin directly via Metav Werkzeuge or consult the Metav advisors if additional guidance is required. M323.B11 gauge pin — 11.11 mm diameter, 50 mm length (Metav IndustryLine) The M323.B11 gauge pin is a single precision plug designed for quick diameter verification, end‑measure references and repeatable inspection tasks in production and quality control environments. Precision diameter 11.11 mm, tolerance ±0.002 Compact 50 mm length for confined inspection spaces Special steel construction for high wear resistance Workshop version optimised for daily use Repeatable diameter control for reliable inspection results The M323.B11 functions as a precision reference for diameter checks where repeatability is essential. With a nominal diameter of 11.11 mm and a verified ±0.002 mm tolerance, the pin enables tight pass/fail decisions in assembly and inspection jigs. This level of dimensional certainty reduces ambiguity when validating fits and clearances and supports traceable quality documentation. The modest overall mass (approx. 0.1 kg) and the compact 50 mm length make the plug simple to handle and integrate into gauge blocks, fixture checks or manual measuring sequences while maintaining a stable contact area for consistent measurements. Tough, low‑maintenance design tailored to workshop use Constructed from special steel, this workshop‑grade test pin resists abrasion and maintains form under frequent contact cycles, extending service life between maintenance intervals. The “workshop version” designation indicates a focus on robustness and practical finish rather than laboratory‑grade surface treatments, which suits production floors and maintenance bays where tools are subject to regular handling. As a single, individually supplied gauge pin, it can be used as a replacement element in existing sets or as a standalone reference, reducing downtime and simplifying stockkeeping for routine inspection tasks. Easy integration into inspection routines and traceability Supplied as an individual gauge element with clear identification (SKU M323.B11, GTIN 4061905063831), this precision plug supports organised inventory and traceable measurement procedures. The compact geometry fits common bores, gauges and fixture pockets, enabling rapid checks without complex setup. Where interchangeability and clear labelling are important, the M323.B11 offers a straightforward component for calibration blocks, hand checks and assembly control. The combination of clear specification and practical construction supports efficient workflows in manufacturing and maintenance contexts while facilitating procurement and replacement planning. For supply enquiries or specification confirmation, contact Metav Werkzeuge — Metav IndustryLine specialists can advise on compatibility, batch supply and delivery options to match production needs Technical Data SKU: M323.B11 GTIN: 4061905063831 Manufacturer: Metav IndustryLine Facts Nominal diameter: 11.11 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Configuration: Single gauge pin Version: Workshop execution Category: Gauge pin / test pin FAQ What tolerance does the M323.B11 gauge pin have? The M323.B11 gauge pin is specified with a tolerance of ±0.002 mm, suitable for demanding inspection tasks. Which material is used for this test pin? The M323.B11 is manufactured from special steel, selected for wear resistance and durability in workshop conditions. For which inspection tasks is this gauge pin intended? This single gauge pin is intended for diameter verification, end‑measure references and quick fit checks in production and quality control procedures. Is a calibration certificate supplied with the pin? No calibration certificate is specified in the product data for the M323.B11; calibration services or certificates can be discussed with Metav Werkzeuge if required. How should the gauge pin be stored to ensure longevity? Store the M323.B11 in a dry, clean environment, protected from shocks and corrosive agents; use labelled compartments to maintain traceability and avoid wear from loose contact with other tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.12mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Compact accuracy for final-dimension checks: the combination of 11.12 mm nominal diameter, a tight ±0.002 mm tolerance and a 50 mm working length ensures repeatable end‑dimension verification, reduced rework and consistent fixture setting. Order the gauge pin directly via Metav Werkzeuge or request application advice from our consultants. Gauge pin (single) M323.B12 — 11.12 mm / 50 mm, workshop version by Metav IndustryLine The gauge pin, single, 11.12 mm diameter and 50 mm length is designed for precise end‑dimension measurement and fixture reference in workshop and inspection environments. Workshop version, robust design Diameter 11.12 mm, tight tolerance Tolerance ±0.002 mm for repeatable checks Length 50 mm, compact and balanced Precision where final dimensions matter A compact, single gauge pin with a nominal diameter of 11.12 mm and a verified deviation of ±0.002 mm is suited to tasks that demand high repeatability rather than complex measuring setups. The narrow tolerance reduces measurement scatter when used as a reference in go/no‑go checks or for setting up jigs. In practice, this translates into fewer adjustments on machining centres and a lower scrap rate, because the inspection reference is both stable and well defined. Robust construction for everyday workshop use Manufactured from special steel, the pin combines hardness and resistance to wear appropriate for routine handling and repeated seating in fixtures. The 50 mm length provides a stable bearing in most clamping and inspection arrangements while remaining easy to manipulate by a single operator. The workshop execution balances stiffness and manageability, and a total mass of approximately 0.1 kg gives the pin a reassuring feel without unnecessary bulk. Practical integration and asset management Delivered as a single, plainly identified item and packaged for transport in a plastic or wooden box, the pin is simple to store and track within stock systems. The compact format cuts handling time during inspection sequences and makes the component convenient for bench‑level tasks such as end‑dimension verification, tooling set‑up and quick interchange checks. Metav IndustryLine’s emphasis on accessible precision helps integrate such items into standard workflows with minimal disruption. Discuss Metav IndustryLine’s M323.B12 for application suitability with Metav Werkzeuge — order from Emmerich for swift delivery or request detailed technical matching for inspection fixtures Technical Data Article number: M323.B12 GTIN: 4061905063848 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 11,12 mm Länge 50 mm Facts Diameter: 11.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: Plastic or wooden case FAQ What tolerance does the M323.B12 gauge pin offer? The M323.B12 gauge pin (Metav IndustryLine) is specified with a tolerance of ±0.002 mm, suitable for repeatable end‑dimension checks. Is a calibration certificate supplied with the gauge pin? No calibration certificate is specified in the provided data for the M323.B12 single gauge pin. What material is the gauge pin made from? The M323.B12 is manufactured from special steel; no surface coating is specified in the available data. For which inspection tasks is this pin intended? The pin is intended for end‑dimension verification, fixture and jig referencing and quick go/no‑go checks in workshop and inspection routines. How is the pin delivered and stored? The M323.B12 is supplied as a single item and delivered in a plastic or wooden case for transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.13mm Gauge Pin Length 50mm Workshop Version, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of workshop‑grade construction, 11.13 mm nominal diameter and ±0.002 mm tolerance for consistent end‑measurements and repeatable inspection routines; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.B13 — 11.13 mm diameter, 50 mm length (workshop grade) by Metav IndustryLine Gauge pin M323.B13 is a single precision measuring pin intended for end‑measurements and fitting checks in workshop and quality‑control environments, with a nominal diameter of 11.13 mm and a 50 mm usable length. Workshop execution for robust use Nominal diameter 11.13 mm 50 mm working length Tolerance ±0.002 mm Reliable accuracy for repeatable end measurements The M323.B13 gauge pin delivers a clear technical advantage in routine inspection tasks thanks to its ±0.002 mm specification, which supports high repeatability when checking end‑measurements and fit tolerances. This level of precision reduces rework and inspection uncertainty by providing a stable reference diameter for plug checks, go/no‑go tests and assembly verification. The nominal 11.13 mm diameter is held to tight limits, helping to standardise measurements across production batches and to streamline quality documentation. Designed for durable workshop use and simple handling Built as a workshop execution, the pin is made from special steel chosen for dimensional stability under everyday handling. The 50 mm length offers a practical balance between reach and rigidity, making the pin suitable for use in test fixtures, gauge blocks and handheld inspection routines without excessive flex. The compact mass supports quick manipulation during repetitive checks, and the single‑piece design keeps set‑up straightforward, reducing setup time and the likelihood of handling errors. Practical integration into inspection routines The measuring pin is intended as a reliable datum for end‑measurements and assembly trials; it is easy to incorporate into existing test benches or inspection jigs. With a low weight of 0.1 kg and a standard form factor, it can be stored alongside other measuring pins and selected according to nominal diameter. The product quality and clear technical specification make documenting inspections simpler and support traceable quality processes in metalworking and precision assembly operations. For tailored advice or to request the M323.B13 for your inspection setup, contact Metav Werkzeuge in Emmerich—technical consultants are available to discuss fitment and application details. Technical data Article number: M323.B13 GTIN: 4061905064418 Brand: Metav IndustryLine Facts Nominal diameter: 11.13 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: Special steel Single gauge pin for end‑measurements Category: Measuring pins FAQ What inspection tasks is this gauge pin suited for? The M323.B13 gauge pin is suited for end‑measurements, plug checks and fitting verifications in workshop and production inspection routines. How precise is the M323.B13 compared with common workshop gauges? The specified tolerance of ±0.002 mm places this pin in the high‑accuracy range for workshop measuring pins, providing repeatable results for tight fitting checks. Which material is the pin made from and what does that mean in practice? The pin is made from special steel, chosen to provide dimensional stability and durability for regular inspection use in workshop conditions. Can the pin be used with standard inspection fixtures? Yes — the 11.13 mm nominal diameter and 50 mm length conform to common form factors and are compatible with typical test fixtures and holders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.15mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm tolerance and compact handling for reliable end‑measurements; order the test pin directly via Metav Werkzeuge or consult the sales team for application advice. Test pin, single — 11.15 mm Ø, 50 mm length (Metav IndustryLine) The Test pin, single, 11.15 mm length 50 mm is a workshop‑grade gauging pin designed for precise end‑measurement and checking applications in production and quality control. Workshop version, robust design Diameter 11.15 mm for precision fits Length 50 mm, stable handling Tolerance ±0.002 mm for fine control Engineered for repeatable precision in production This gauging element delivers consistent measurement performance through a nominal diameter of 11.15 mm and a compact 50 mm overall length, which together reduce lever effects and improve handling when checking small bores or mating features. The specified tolerance of ±0.002 mm reflects a high accuracy class, making the pin suitable as a direct go/no‑go reference or for use in fixture setting where repeatability is essential. The solid construction provides low deformation under light contact pressure, so measurement variance remains minimal across repeated cycles. Designed for reliable workshop use and simple integration Manufactured from special steel, the component resists wear while offering a balanced surface finish that mates well with common hardened and un‑hardened workpiece materials. The workshop‑grade execution prioritises robustness and ease of use: the short length and compact diameter give operators secure handling and reduce the risk of accidental bending during routine checks. As a gauging pin, it suits end‑measurement, seating verification and assembly checks; its form factor also eases manual gauging tasks in tight setups where larger instruments would be unwieldy. Practical benefits and where it adds value Using a dedicated checking pin with a defined nominal diameter simplifies quality routines and speeds up in‑process inspections, cutting non‑value‑adding time from setup and tolerance verification. The combination of 11.15 mm nominal size and ±0.002 mm precision supports close‑tolerance production runs and helps maintain consistent part acceptance criteria. For procurement, the clear specification reduces uncertainty about fit and interchangeability when replacing or standardising gauging elements in jigs, fixtures or verification sets. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine test pin M323.B15 can be integrated into existing checks and fixtures, or to request tailored advice from the Emmerich team. Technical Data Article number: M323.B15 GTIN: 4061905064432 Description: Test pin, single, 11.15 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 11.15 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Eclass: 21170231 Special features Material: Special steel Version: Workshop execution Application focus: End measurements / checking Story trigger: end measurements FAQ What tolerance can be expected from this checking pin? The test pin is specified with an accuracy of ±0.002 mm, providing high‑precision performance suitable for close‑tolerance inspection tasks with the Metav IndustryLine test pin M323.B15. Can this pin be used for fixture setting and end‑measurement checks? Yes, the compact 50 mm length and 11.15 mm nominal diameter make the pin well suited for fixture setting, seating checks and end‑measurement routines in workshop environments. What material is the pin made from and how does that affect wear? The pin is produced from special steel, offering improved wear resistance and durability for repeated contact checks compared with untreated mild steels. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.16mm Gauge Pin, 50mm Length Workshop Version, Special Steel, ±0.002mm Accuracy - Metav IndustryLine
Take advantage of a combination of high repeatability (±0.002 mm), special‑steel robustness and a compact 50 mm working length for reliable end‑measurement and fixture checks; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants. Test pin, single, 11.16 mm, 50 mm length — Metav IndustryLine workshop version Test pin, single, 11.16 mm, 50 mm length for precise end‑measurement, fixture verification and go/no‑go checks in workshop and inspection environments Workshop version for robust shop‑floor use Diameter 11.16 mm with ±0.002 mm accuracy Special steel construction for long service life Delivered in a transport case for secure handling Repeatable results through calibrated precision The gauge pin is designed for repeatable end‑measurements where dimensional certainty matters. With a declared tolerance of ±0.002 mm, the pin provides a performance level that supports high‑precision inspection tasks and tight assembly controls. The 11.16 mm diameter is produced to strict tolerances, so mating bores and fits can be verified quickly and reproducibly. This level of accuracy reduces rework and supports consistent quality control across serial production. Built for workshop conditions and long service life Produced from special steel and specified as a workshop version, the pin resists wear while retaining measuring integrity during routine handling. The 50 mm length offers a practical balance between reach and stiffness for common inspection routines, while the robust finish eases cleaning and maintenance. Delivered in a secure transport case, the gauge pin stays protected in transit and storage, preserving surface condition and measurement reliability between uses. Efficient integration into inspection and fixture routines As a compact, single‑piece gauge, the component simplifies go/no‑go checks, end‑of‑line inspections and fixture setting without complex setup. The straightforward geometry supports fast tactile or optical comparison and fits standard clamping or fixture holes. Traceable identification with SKU M323.B16 streamlines inventory and process documentation, helping to maintain audit trails for quality systems and shop‑floor traceability. For reliable end‑measurement and workshop testing, request the Metav IndustryLine gauge pin (M323.B16) from Metav Werkzeuge in Emmerich for delivery options and application advice. Technical data Article number: M323.B16 GTIN: 4061905064920 Label: Test pin, single, 11.16 mm, 50 mm length Numbers / Core technical data Diameter: 11.16 mm Length: 50 mm Nominal accuracy: ±0.002 mm Weight: 0.1 kg Designs / Special features Material: special steel Version: workshop execution Delivery: transport case Intended use: end‑measurement / fixture verification SKU: M323.B16 FAQ What level of accuracy can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, giving high repeatability suitable for demanding inspection and assembly tasks. Is the pin suitable for use directly on the shop floor? Yes, the workshop execution and special‑steel construction make this test pin resilient to typical shop‑floor handling and periodic cleaning. How is the product identified for inventory and traceability? The item is listed under SKU M323.B16 and GTIN 4061905064920 to support traceability and documentation in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.17mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact gauge pin in special steel with a tight ±0.002 mm tolerance and a 11.17 mm diameter delivers repeatable end‑measurements for workshop inspection tasks; its 50 mm length keeps handling straightforward while the transport box protects the pin in storage and transit. Order the test pin directly via Metav Werkzeuge or consult our advisors for specification matching. Test pin M323.B17 — Gauge pin, 11.17 mm diameter, 50 mm length (Metav IndustryLine) The Test pin M323.B17 is a single gauge pin designed for precise end‑measurements and fit checks in workshop and inspection environments. Workshop version for robust use Diameter 11.17 mm for tight fits Tolerance ±0.002 mm high precision Delivered in protective transport box Precision where consistency counts The compact gauge pin provides a defined reference for end‑measurements and plug‑gauge tasks, offering a diameter of 11.17 mm with a verified tolerance of ±0.002 mm. This level of accuracy reduces measurement uncertainty and speeds up go/no‑go assessments on production lines and in quality control. The stated tolerance is suitable for high‑precision workshop checks where reproducible fits and clear pass/fail limits are required, enabling efficient inspection routines and fewer reworks. Made for everyday workshop use Constructed from special steel, this workshop edition emphasises wear resistance and dimensional stability under frequent handling. At 50 mm overall length the pin balances accessibility with stiffness, simplifying insertion into bores and recesses without excess flex. Supplied in a protective transport box, the pin arrives ready for safe storage and transport; the packaging reduces the risk of nicks and surface damage that would otherwise compromise measurement integrity. Streamlining inspection procedures and stock management As a standardised gauge pin, the item supports repeatable test routines and straightforward inventory control; the compact format minimises storage space while the clear SKU and GTIN enable traceable procurement. Integration into existing metrology sets is simple, and the uniform dimensions assist in maintaining consistent process control across shifts. Backed by Metav’s emphasis on accessible precision, the component is positioned as a reliable workshop aid for machinists and inspectors seeking consistent end‑measure results. For workshop-ready, high-precision gauge pins from the Metav IndustryLine range, contact Metav Werkzeuge in Emmerich to discuss suitability for specific inspection tasks or to request a quotation. Technical data Article number: M323.B17 GTIN: 4061905064937 ECLASS: 21170231 Label: Prüfstift, einzeln, 11,17 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 11.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Delivered in transport box for protection Category: Gauge pins / Messstifte FAQ What is the nominal diameter and tolerance of the pin? The nominal diameter is 11.17 mm and the pin is specified with a tolerance of ±0.002 mm for precise end‑measure applications using the M323.B17 gauge pin. Which material is used for this gauge pin? The gauge pin is made from special steel, chosen to provide durability and dimensional stability in workshop conditions. Is the pin supplied with protective packaging? Yes, the M323.B17 is supplied in a protective transport box to prevent damage during storage and transit. What are typical applications for this item? Typical uses include end‑measure checks, plug‑gauge comparisons and fit verification in production inspections and workshop measuring routines. How is the component identified for ordering and stock control? The item is identified by SKU M323.B17 and GTIN 4061905064937 to support clear procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.18mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, sub‑millimetre accuracy and compact handling for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants. Gauge pin, single — 11.18 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single — 11.18 mm is a precision checking pin designed for end‑measure gauging and fit verification in workshop and inspection environments. Workshop-grade special steel construction Diameter 11.18 mm for end‑measure checking Length 50 mm with ±0.002 mm accuracy Supplied in transport case for safe storage Precision where every micron counts The gauge pin, single — 11.18 mm is engineered for repeatable dimensional verification in production and inspection settings. With a diameter of 11.18 mm and a compact 50 mm working length, the pin sits within the micro measurement class (10–100 mm), offering the stiffness and control required for fine mechanical tasks. The specified ±0.002 mm tolerance corresponds to a two‑micron variation, which supports stringent acceptance criteria and reduces the need for corrective rework — a clear efficiency advantage for quality teams. Practical advantages in workshop use As a solid checking element made from special steel, the pin delivers durable contact performance against gauge blocks, bores and mating components. The polished, ground surface reduces measurement noise and wear, while the moderate mass (0.1 kg) gives a stable feel during manual handling. The geometry enables straightforward end‑measure and plug checks, translating the technical specification into faster inspection cycles and fewer inconclusive measurements. The construction suits serial checking and occasional laboratory use alike. Handling, storage and inspection readiness Designed as a workshop‑grade tool, the pin is supplied in a protective transport case, which supports safe storage and reduces the risk of accidental damage to the measuring face. Traceability is straightforward: the article is listed under SKU M323.B18 and carries a GTIN for inventory control. Robust material and finish ensure long service life under normal workshop conditions, while the compact dimensions make it easy to include in inspection kits or on the shop‑floor test bench. For reliable end‑measure verification choose the Metav IndustryLine gauge pin M323.B18 — contact Metav Werkzeuge for detailed product information and supply from Emmerich. Technical data Article number: M323.B18 GTIN: 4061905064944 Label: Prüfstift, einzeln, 11,18 mm Länge 50 mm ECLASS: 21170231 Facts Diameter: 11.18 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Features Material: Special steel Workshop version (robust finish) Supplied in transport case Category: Gauge pins (Messstifte) FAQ What is the declared tolerance of this checking pin? The declared tolerance is ±0.002 mm, which equates to a two‑micron accuracy suitable for tight inspection tolerances in machining and assembly. For which measurement tasks is this pin intended? This checking pin is intended for end‑measure and plug checks, fit verification and comparative gauging in workshop and inspection routines. Is the pin suitable for use in a production inspection kit? Yes — the compact 50 mm length and robust special steel construction make the pin appropriate for inclusion in workshop inspection kits and test benches. Does the article include an identifying code for stock and traceability? Yes, the item is listed as SKU M323.B18 and carries the GTIN 4061905064944 for inventory control and traceability. How should the pin be stored to maintain accuracy? Store the pin in its supplied transport case and avoid contact with abrasive surfaces or corrosive environments to preserve the measurement face and dimensional stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.1mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Combine high repeatability with compact handling: the gauge pin offers a precise 11.1 mm diameter, a robust 50 mm length and a tight ±0.002 mm tolerance for consistent end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for application advice. M323.B10 Gauge pin — 11.1 mm × 50 mm, workshop version (Metav IndustryLine) M323.B10 is a single gauge pin for quick verification of end dimensions and fit checks in workshop environments Diameter 11.10 mm for precise fit Hardened special steel for durability Length 50 mm – compact workshop version Tolerance ±0.002 mm for fine measurements Accuracy that supports repeatable inspection results Precision is the foremost requirement for end‑dimension control. With a nominal 11.1 mm diameter and a documented ±0.002 mm tolerance, this gauge pin enables reliable pass/fail decisions during assembly and inspection. The stated tolerance corresponds to a fine inspection grade suitable for tight fits and validation of machined bores; the numeric specification communicates comparability across measurement tasks and reduces uncertainty during quality checks. Using a hardened measuring dowel minimises wear and preserves contact geometry, so measured dimensions remain reproducible over many cycles. Workshop design for dependable daily use Built as a workshop version, the pin combines a special steel construction with a compact 50 mm length to balance stiffness and ease of handling. The material choice increases resistance to abrasion and maintains a clean mating surface, which prolongs service life in high‑throughput workspaces. At approximately 0.1 kg, the component is easy to position and manoeuvre without compromising on mass needed for stable contact. This configuration reduces measurement variability compared with softer alternatives and supports fast verification routines on the shop floor. Practical application and handling tips The pin is intended for end‑dimension checks, assembly verifications and gauge set extensions where a single, precise reference dowel is required. Being a single measuring element, it integrates simply with existing inspection benches and can be used as a reference for plug and bore checks or as a calibration aid for comparators. Careful handling and routine cleaning of the contact surfaces preserve accuracy; small dimensional changes due to contamination are minimised when the pin is wiped before use. The compact format suits rapid in‑process checks without obstructing assembly tasks. Contact Metav Werkzeuge in Emmerich for ordering the M323.B10 gauge pin or for tailored technical advice and delivery options Technical data SKU: M323.B10 GTIN: 4061905063824 Article: Gauge pin, single, 11.1 mm × 50 mm Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 11.1 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Material & special features Material: Special steel Version: Workshop version Feature: Single measuring pin eClass: 21170231 FAQ What diameter does the gauge pin have? The pin has a nominal diameter of 11.1 mm, specified for precise fit checks. How tight is the tolerance on this measuring pin? Tolerance is ±0.002 mm, which supports fine inspection and reproducible pass/fail assessments for small‑bore fittings. Is the pin suitable for regular workshop use? Yes, the workshop version is designed for everyday handling and offers enhanced wear resistance through its special steel construction. Can this component be used for plug or bore verification? The single gauge pin is suitable for plug and bore checks as a reference element in inspection and assembly procedures. What is the article identifier for ordering? Order reference is M323.B10; this identifier relates to the single gauge pin with 11.1 mm diameter and 50 mm length. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.21mm Gauge Pin Length 50mm, Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
Benefit from precise dimensional control and workshop-ready robustness: the combination of ±0.002 mm tolerance and a 50 mm length ensures repeatable go/no-go checks and reliable fit verification in inspection jigs. Order directly via Metav Werkzeuge or consult our specialists for application support. Gauge pin M323.B21 — single inspection pin, 11.21 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin designed for accurate diameter verification and fixture alignment in workshop and quality‑control environments, with a compact 50 mm shank for easy access. Workshop version, durable construction Nominal diameter 11.21 mm for precise fits 50 mm length for accessible inspections Tolerance ±0.002 mm for repeatable results Precision that reduces rework and inspection time The M323.B21 inspection pin provides a clear measurement reference where tight tolerances matter. With a stated accuracy of ±0.002 mm, the pin is suited for final diameter checks and alignment tasks that otherwise cause costly rework. The nominal 11.21 mm diameter gives a defined reference for gauging bores and locating features; using a fixed‑dimension pin removes operator variability and shortens inspection cycles. This rational advantage translates directly into fewer scrap parts and a steadier production flow. Robust, workshop‑grade construction for daily use Constructed from special steel, the pin is made to withstand regular handling and contact with inspection fixtures. The 50 mm shank length balances reach and stiffness, making it simple to insert into bores or datum holes without bending. As a workshop version, the component is intended for frequent use on the shop floor and in fixture setups rather than purely laboratory environments. The compact design and modest weight support rapid manual handling during batch inspections and setup procedures. Integration into inspection workflows and traceability The single pin format simplifies storage and pairing with inspection protocols: the listed SKU M323.B21 and GTIN 4061905065781 enable clear identification in inventory and documentation. The pin suits use in go/no‑go checks, plug gauges for dimensional verification, and as a locating dowel in assembly jigs. Delivered as a single inspection element, it supports straightforward replacement and controlled stock management. Metav IndustryLine supply ensures consistent availability and a quality filter for European workshops, helping maintain measurement confidence across shifts. For reliable, workshop-ready dimensional control, contact Metav Werkzeuge for application advice and procurement support — Metav IndustryLine specialists are available to discuss compatibility and delivery from Emmerich. Technical Data Article number: M323.B21 GTIN: 4061905065781 Category: Gauge pins Facts Diameter (nominal): 11.21 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Material: Special steel Special features Workshop version Single inspection pin Compact shank for accessible checks FAQ What tolerance does the pin offer? The M323.B21 gauge pin is specified with an accuracy of ±0.002 mm, suitable for tight inspection and alignment tasks. Which dimensions are provided for this inspection pin? This inspection pin has a nominal diameter of 11.21 mm and a shank length of 50 mm, referenced on SKU M323.B21 and GTIN 4061905065781. What applications suit this gauge pin? The pin is intended for workshop inspection, fixture alignment and bore verification; the M323.B21 is particularly useful where repeatable location and diameter checks are required. How is the product identified for ordering and stock control? Order and stock references are SKU M323.B21 and GTIN 4061905065781, supplied under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.22mm Gauge Pin 50mm Length Workshop Version, ±0.002mm Accuracy - Metav IndustryLine
Take advantage of a compact reference that combines tight tolerance (±0.002 mm) with a 11.22 mm diameter and a practical 50 mm length for reliable end‑measure checks and fixture alignment; order directly via Metav Werkzeuge or ask the consultants for further specification support. Gauge pin M323.B22 — 11.22 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.B22 is a single, precision cylindrical reference designed for workshop metrology, end‑measure verification and fixture set‑up in production and inspection environments. Workshop version for robust use Diameter 11.22 mm for precise fits Length 50 mm for fixture and end‑measure Tolerance ±0.002 mm high accuracy High precision for repeatable checks The reference pin delivers consistent measurement results thanks to its tightly specified tolerance of ±0.002 mm, which translates into reduced rework and shorter inspection cycles when used as a master plug or alignment dowel. The nominal diameter of 11.22 mm is manufactured to be a true reference for mate‑fits and bore verification; this level of accuracy is particularly valuable where cumulative tolerances in assemblies can compromise interchangeability. By expressing the dimensional specification in clear numerical terms, the component supports straightforward traceability and documentation within quality control routines. Built for workshop handling and fixture integration Constructed from special steel in a workshop execution, the pin is optimised for routine use on the shop floor: the 50 mm effective length gives sufficient engagement for many fixture and jig applications while remaining easy to position with hand tools or clamping systems. The material choice emphasises wear resistance and dimensional stability under typical handling conditions, which reduces measurement drift over repeated use. The compact mass and balanced geometry also ensure simple, repeatable seating in gauges and bores, supporting faster set‑up times and lower operator influence on results. Practical use cases and compatibility with inspection workflows As a single gauge pin, this reference serves in end‑measure inspections, plug gauges for bore checks and as a quick alignment aid in assembly fixtures. Its workshop orientation makes it suitable for machine shops, toolrooms and maintenance departments that require a robust reference for daily checks. The cylindrical form is compatible with common locating bushes and measuring fixtures; when combined with clear labelling and systematic storage, the pin helps maintain a reliable reference stock that supports reproducible measurements and expedited troubleshooting in production runs. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for procurement and delivery direct from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.B22 GTIN: 4061905065798 Category: Gauge pins Measured values Diameter: 11.22 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop execution Packaging: single item Intended use: end‑measure checks and fixture alignment FAQ What is the nominal diameter of the pin? The pin has a nominal diameter of 11.22 mm, specified for precise fits and bore verification. What tolerance is achieved with this gauge pin? This gauge pin is manufactured to a tolerance of ±0.002 mm, suitable for high‑accuracy workshop inspections. What length does the pin have and how does that affect use? The pin measures 50 mm in length, offering sufficient engagement for fixtures and end‑measure checks while remaining easy to handle. Which material is used for the pin? The component is made from special steel, chosen for wear resistance and dimensional stability in workshop conditions. How is the item identified for ordering? The product is listed under SKU M323.B22 and GTIN 4061905065798 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.23mm Gauge Pin 50mm Workshop Version, Special Steel - Metav IndustryLine
Compact workshop-grade performance with a diameter of 11.23 mm and a tolerance of ±0.002 mm ensures dependable end‑dimension checks; the 50 mm length and special steel construction deliver robust handling in everyday metrology. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 11.23 mm — 50 mm length (Metav IndustryLine) Gauge pin, single, 11.23 mm — a compact inspection pin for end‑dimension verification in workshop and metrology tasks. Workshop-grade construction Diameter 11.23 mm, tolerance ±0.002 mm Length 50 mm for depth and bore checks Supplied in protective case Accurate checks where small deviations matter The compact inspection pin is designed for reliably confirming final dimensions and fits in confined assemblies. With a nominal diameter of 11.23 mm and an indicated tolerance of ±0.002 mm, the component supports fine acceptance sampling and pinpoint gauging tasks in mechanical workshops. The specified tolerance translates into measurable assurance when verifying bore diameters or mating parts: precision at this level reduces rework and supports consistent assembly quality, making the pin an effective tool for short‑run checks and routine quality control. Practical handling and workshop resilience A 50 mm overall length gives adequate reach for common depth and step measurements while remaining easy to guide by hand or within simple fixtures. Constructed from special steel, the pin balances wear resistance and dimensional stability for daily workshop use; the workshop‑grade finish aids repeatable contact geometry. Supplied in a protective case for transport, the item arrives ready for secure storage and reduces the risk of damage during handling — useful where mobility between benches or jobs is required. Application fit and purchasing rationale As a single inspection pin, the part is ideal for fast verification of end dimensions, trial fits and fixture set‑up in assembly, toolrooms and small batch production. The compact format clusters under the micro gauge bracket (suitable for tools with a maximum measuring range up to 100 mm), which is why it is particularly appropriate for fine mechanical and small component tasks. Backed by Metav IndustryLine’s workshop focus, the pin complements a broader metrology kit and helps maintain throughput with minimal downtime. Enquire with Metav Werkzeuge for availability, technical clarification or tailored advice on integrating this workshop gauge pin into existing inspection routines. Technical data SKU: M323.B23 GTIN: 4061905065804 Brand: Metav IndustryLine Key figures Diameter: 11.23 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Supplied in protective case for transport Category: Gauge pins / Messstifte FAQ What is the exact diameter and tolerance of this gauge pin? The gauge pin M323.B23 (Metav IndustryLine) has a diameter of 11.23 mm with a stated tolerance of ±0.002 mm. What is the overall length and typical use cases for this pin? With an overall length of 50 mm, the pin is intended for depth checks, bore verification and short‑range end‑dimension inspections in workshop and toolroom settings. Which material is used for the pin? The pin is made from special steel, specified for workshop resilience and dimensional stability. Is the item supplied ready for safe transport and storage? Yes — the M323.B23 is supplied in a protective case intended for transport to reduce handling damage. Is this pin suitable for very small or very large components? The compact format places the pin in the micro class (measuring ranges up to 100 mm), making it suitable for small components and precision assemblies rather than large structural parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.24mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm accuracy and a compact 50 mm length for reliable end‑measure checks; order the item directly through Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single – Ø 11.24 mm, 50 mm length (Metav IndustryLine) A gauge pin, single, 11.24 mm diameter and 50 mm length, designed for precise end‑measure and fit verification in workshop environments. Workshop‑grade construction Diameter 11.24 mm for precise fits Length 50 mm for compact applications Accuracy ±0.002 mm for fine measurement High precision for repeatable end‑measure checks The M323.B24 inspection pin delivers ±0.002 mm positional certainty, making it suitable where minimal deviation is essential for assembly acceptance or final inspection. The small diameter of 11.24 mm combined with the 50 mm effective length provides a compact verification tool that reduces angular error and improves repeatability during short‑reach checks. Such accuracy supports faster decision making on the shop floor by shortening the loop between measurement and corrective action. Robust workshop design that endures handling Manufactured from special steel, this workshop‑grade pin is prepared for frequent use in industrial environments where handling and transport are part of daily routine. The short, rigid geometry reduces flex and the solid material choice sustains surface integrity under repeated seating in bores or fixtures. Delivered in a protective case, the component remains ready for immediate use and storage, protecting the working surfaces against knocks and contamination between inspections. Practical shop integration and traceability The inspection pin is supplied as a single unit with clear identification via SKU M323.B24 and GTIN 4061905065811, simplifying inventory and procurement processes. Its compact form factor suits fixture checks, go/no‑go sequences and end‑dimension verification for turned or machined parts. Where traceability is required, the clear product labelling supports consistent documentation and stock rotation in mid‑sized to large workshops that prioritise reproducible measurement routines. Choose Metav IndustryLine precision — request the M323.B24 gauge pin from Metav Werkzeuge for expert guidance and reliable delivery from our Emmerich facility Technical data Article number: M323.B24 GTIN: 4061905065811 Category: Messstifte Facts Diameter: 11.24 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Delivered in protective case Label: Prüfstift, einzeln, 11,24 mm Länge 50 mm FAQ What is the declared dimensional tolerance of this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, which supports fine measurement tasks and consistent end‑measure verification. Which material is the pin made from and how does that help in the workshop? The pin is made from special steel, chosen for durability and surface stability under repetitive seating and handling typical in workshop environments. Is the item suitable for short‑reach bore checks and fixture use? Yes, the compact 50 mm length and 11.24 mm diameter make the pin well suited for short‑reach bore inspections and integration into existing checking fixtures. How is the product identified for ordering and stock control? The item is listed under SKU M323.B24 and GTIN 4061905065811, which simplifies procurement and inventory tracking. How is the pin delivered to ensure protection during transport and storage? The pin is supplied in a protective case to prevent damage to the measuring surfaces during transport and while in storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.25mm Gauge Pin 50mm Length Workshop Version Special Steel ±0.002 Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-hardened construction and precise dimensional control to streamline end‑measurement and fit checks. The 11.25 mm gauge pin with a 50 mm shaft and ±0.002 mm manufacturing tolerance delivers reliable go/no‑go verification; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 11.25 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, 11.25 mm, 50 mm length serves as a workshop-grade end‑measurement and fit‑control pin for inspection, assembly and go/no‑go checks. Workshop version for robust use Diameter 11.25 mm with ±0.002 mm tolerance Length 50 mm for reliable end‑measurement Supplied in transport box for safe handling Consistent accuracy for critical fit checks The 11.25 mm diameter and an exacting ±0.002 mm tolerance make this gauge pin a dependable tool for repeatable dimensional checks in small‑part inspection and assembly. Manufactured to tight tolerances, the pin supports consistent fit control and runout assessment so that mating parts can be validated without time‑consuming rework. The stated tolerance corresponds to high manufacturing precision, reducing measurement uncertainty and improving first‑time conformity rates on production and maintenance tasks. Durable workshop design that eases handling Built as a workshop version from special steel, the pin balances wear resistance and dimensional stability under regular use. With a 50 mm shaft length and a compact mass of 0.1 kg, the component is easy to handle while offering the stiffness required for end‑measurement tasks. Delivery in a protective transport box (plastic or wooden) reduces the risk of damage during storage or transit and keeps the pin ready for immediate use on the bench or in the inspection cabinet. Practical use cases and integration into inspection routines This single gauge pin is suited to go/no‑go verification, bore alignment, end‑measure reference and assembly trials. The smooth, hardened shaft permits gentle insertion into bores or fixtures for quick pass/fail checks, while the precise diameter supports reproducible seating for comparative measurements. For best results, combine the pin with calibrated micrometres or dial gauges to document deviations; the pin also functions well as a reference mandrel for visual and tactile evaluation during final assembly. Discuss specific application requirements with Metav Werkzeuge to ensure the appropriate Metav IndustryLine gauge pin is selected for precise end‑measurement tasks; contact our consultants via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical Data Article number: M323.B25 GTIN: 4061905065828 Brand: Metav IndustryLine Measurements Diameter: 11.25 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.1 kg Materials & Features Material: Special steel Workshop execution Supplied in transport box for transport and protection Intended for end‑measurement and fit verification FAQ What material is the pin made from and how does that affect wear? The gauge pin is manufactured from special steel; this provides good wear resistance and dimensional stability for routine workshop inspection and reduces the frequency of replacement. Is the 11.25 mm dimension suitable for bore verification and alignment tasks? Yes, the 11.25 mm diameter of the gauge pin is intended for bore verification and alignment; the tight ±0.002 mm tolerance ensures consistent seating and reliable fit checks. Can this pin be used as a reference for micrometre or dial gauge comparisons? The pin is suitable as a reference mandrel for comparative measurements when used alongside calibrated micrometres or dial gauges, enabling documented deviation checks during inspection. How is the pin delivered and what protection is provided during transport? The item is supplied in a transport box (plastic or wooden) to protect the surface finish and preserve dimensional integrity during storage and shipping. Which product code identifies this gauge pin for reordering? This gauge pin is listed as M323.B25 under the Metav IndustryLine range and carries GTIN 4061905065828 for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.26mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade durability, tight ±0.002 mm accuracy and the compact 50 mm length for reliable end‑dimension checks and repeatable assembly verifications. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.B26 — Ø 11.26 mm, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑dimension checks and fit verification in workshop and production settings. Workshop‑grade design for daily use Diameter Ø 11.26 mm for precise fits Length 50 mm suited for end‑dimension checks Accuracy ±0.002 mm for tight tolerances Improve measurement throughput with consistent fits The compact gauge pin delivers a measurable advantage where fast, repeatable checks are required. With a nominal diameter of Ø 11.26 mm and a declared accuracy of ±0.002 mm, the pin reduces uncertainty in fit and clearance inspections, which in turn lowers the rate of rework and speeds up assembly control. The combination of tight tolerance and simple geometry makes this item particularly effective for quick go/no‑go verification and end‑dimension confirmation on shafts, bores and mating parts. Durable workshop construction for continuous use Manufactured from special steel, the pin is engineered for wear resistance and dimensional stability under frequent handling. The 50 mm length provides sufficient engagement for end‑dimension measurement while remaining easy to handle during repetitive tasks; the low mass (approx. 0.1 kg) helps maintain operator comfort over many cycles. This workshop execution is intended for everyday inspection tasks on production floors and in maintenance bays, offering a balance between robustness and usability that cuts downtime for routine quality control. Traceability and integration into inspection routines Marked and stocked as M323.B26, the single gauge pin supports straightforward inventory control and integration into fixtures or pin sets. The simple cylindrical form facilitates use as a reference mandrel for assembly checks and as a plug for bore verification. Clear specification of diameter, length and accuracy simplifies documentation in inspection reports and process controls, supporting consistent quality practices across shifts and sites while enabling reliable comparison between batches. Choose the Metav IndustryLine M323.B26 for dependable workshop measurements and contact Metav Werkzeuge for tailored advice or procurement from Emmerich. Technical data Article number: M323.B26 GTIN: 4061905065835 eClass: 21170231 Facts Diameter: 11.26 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Execution: Workshop version Packing: single item delivery Category: Gauge pins FAQ What measurement tolerance can be expected from this pin? The gauge pin M323.B26 is specified with an accuracy of ±0.002 mm, making it suitable for tight tolerance checks and repeatable fit verification. Which materials is the pin suited to check or reference? The Metav IndustryLine gauge pin is a hard special steel component intended as a reference for metal parts such as shafts and bores; it is used to verify end dimensions rather than to machine materials. Is the length appropriate for standard end‑dimension checks? Yes — the 50 mm length provides a reliable engagement depth for end‑dimension and bore‑fit inspections while remaining easy to handle during repetitive checks. Can this pin be integrated into fixtures or sets? The simple cylindrical geometry and standard diameter of Ø 11.26 mm allow the pin M323.B26 to be incorporated into custom fixtures, jigs or pin sets for assembly and inspection processes. How is the product identified for ordering and traceability? This single gauge pin is stocked as M323.B26 (GTIN 4061905065835) to support clear ordering and traceability within inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.27mm Gauge Pin, 50mm Length Workshop Finish, Special Steel, ±0.002mm Tolerance - Metav IndustryLine
Take advantage of precise 11.27 mm sizing, ±0.002 mm tolerance and a robust 50 mm length to secure repeatable end‑measurement checks in production and inspection. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, Ø 11.27 mm × 50 mm — Metav IndustryLine workshop version Gauge pin, single, Ø 11.27 mm × 50 mm is a compact workshop probe pin designed for precise end‑measure verification, fit checks and short‑range dimensional controls in metalworking and quality inspection. Workshop-grade execution Diameter 11.27 mm precision Length 50 mm robust design Accuracy ±0.002 mm tolerance Repeatable precision for routine inspection The compact probe delivers stable dimensional control thanks to its nominal diameter of 11.27 mm and a declared manufacturing tolerance of ±0.002 mm, which supports tight process windows in small‑part inspection. Such consistency reduces rework and speeds decision making on the shop floor: measurements that conform to the specified tolerance allow confident pass/fail decisions during incoming inspections or final checks. The stated accuracy corresponds to high‑grade gauge manufacturing and is suitable for matching against calibrated reference blocks and pin gauges. Robust execution built for everyday workshop use Constructed from special steel, the pin is finished for durable contact surfaces and reliable wear resistance under frequent use. With a length of 50 mm, the geometry provides sufficient engagement for end‑measurement tasks while remaining easy to handle and position in fixtures. The workshop‑grade execution means the component is designed to tolerate typical handling and mounting without compromising the measured diameter, offering a balance between longevity and practical usability in production environments. Simple integration into measurement and assembly workflows The short, cylindrical form factor is ideal for rapid fit checks, gauge stack assemblies and fixture validation. As a single gauge pin, it simplifies set‑up in test benches and jigs where straightforward insertion and tactile feedback are required. Traceable identification via SKU and GTIN supports inventory control and procurement, while the compact mass ensures easy storage in inspection kits. The component’s tight tolerance reduces the need for multiple corrective measurements, saving operator time and improving throughput. Confidence through supply chain and quality focus Sourcing through Metav IndustryLine brings pragmatic quality assurance to the workshop: established distribution and a European quality filter ensure consistent delivery and documentation. This gauge pin benefits from that same attention to consistency, helping to standardise inspection routines across multiple machines or shift teams and reinforcing reproducibility in everyday measurement tasks. Request tailored advice from Metav Werkzeuge on the Metav IndustryLine gauge pin (SKU M323.B27) to ensure the component fits your inspection routine and production requirements Technical data SKU: M323.B27 GTIN: 4061905066252 Label: Gauge pin, single, Ø 11.27 mm × 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 11.27 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.1 kg Materials and features Material: Special steel Version: Workshop execution Accuracy class: high‑precision gauge manufacturing FAQ What measurement tolerance does this pin provide? The gauge pin is manufactured to a tolerance of ±0.002 mm, ensuring tight repeatability for small‑part inspections and end‑measure checks with the Metav IndustryLine gauge pin (SKU M323.B27). Is the pin suitable for fixture or jig use? Yes, the 50 mm length and robust steel construction make it suitable for fixtures, jigs and quick fit checks where short engagement and consistent contact are required. Which materials can be inspected with this pin? The pin itself is a dimensional reference; it supports inspection and fit testing of components made from common workshop materials such as steel and aluminium when a precise nominal diameter is required. How is the product identified for procurement and inventory? Identification is via SKU M323.B27 and GTIN 4061905066252, which facilitates ordering, stock control and traceability within procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.28mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
High repeatability and a workshop‑ready build combine to make this test pin a reliable choice for routine inspection: ±0.002 mm accuracy and special steel construction provide consistent results and long life. Order the test pin directly via Metav Werkzeuge or ask our consultants if clarification is needed. Test pin M323.B28 — precision inspection pin, Ø 11.28 mm, 50 mm length (Metav IndustryLine) Test pin 11.28 mm, 50 mm length is a compact inspection probe for precise end‑measurement tasks in production and workshop environments Workshop-grade special steel construction Diameter 11.28 mm for precision fit Accuracy ±0.002 mm for tight tolerances Precision that speeds up routine inspection The M323.B28 is engineered for repeatable end‑measurements where tight tolerances matter. Its nominal diameter of 11.28 mm and measured accuracy of ±0.002 mm ensure that checks against plug gauges, inspection jigs or mating bores return consistent results. By reducing measurement scatter, the pin helps to cut rework rates and supports faster go/no‑go decisions on the shop floor. The specification is suitable for use in quality control stations and inline inspection points where measurable gains in throughput are required. Robust handling and stable measuring geometry Constructed from special steel, the pin combines wear resistance with a stable shaft geometry. The 50 mm length gives sufficient support in fixtures while remaining compact enough for tight assemblies; at around 0.1 kg the component is easy to position and resists unwanted flex during handling. The workshop version designation denotes a design optimised for everyday use in industrial environments, with contours and tolerances chosen to maintain accuracy across repeated seating and removal cycles. Simple integration and reliable traceability Designed as a pragmatic inspection element, the pin fits standard jigs and locating systems and pairs well with go/no‑go and comparator assemblies. The product is supplied with clear identification (GTIN and article number) for traceable asset management and inventory control. Backed by Metav’s emphasis on consistent supply and quality control, this pin supports a predictable inspection workflow and helps to uphold production tolerances without over‑engineering the test setup. For workshop inspections that demand consistent tolerances, request the Metav IndustryLine test pin M323.B28 via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for product availability and application advice from Emmerich Technical data Article number: M323.B28 GTIN: 4061905066856 Brand: Metav IndustryLine Core technical values Nominal diameter: 11.28 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Special features and design Material: special steel Workshop version for everyday industrial use Category: test pin / inspection probe FAQ What level of accuracy does the pin provide? The test pin M323.B28 (Metav IndustryLine) is specified with an accuracy of ±0.002 mm, suitable for repeatable inspection tasks and tight tolerance checks. Which dimensions define the pin? Dimensions are 11.28 mm nominal diameter and 50 mm shaft length; the article number is M323.B28 and the GTIN is 4061905066856 for clear identification. Is the design suitable for shop‑floor jigs and fixtures? Yes — the workshop version construction and compact 50 mm length make this pin appropriate for integration into standard fixtures and go/no‑go assemblies. What material is used for durability? The pin is made of special steel, chosen for wear resistance and dimensional stability under repeated use. How is the product identified for inventory and traceability? The inspection pin is delivered with a GTIN and article number (M323.B28) to support traceability and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.29mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of compact dimensions, industrial accuracy and robust material for reliable end‑size verification. The small footprint and ±0.002 mm tolerance support repeatable checks and reduce downstream rework. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.B29 gauge pin — 11.29 mm diameter, 50 mm length (Metav IndustryLine) The M323.B29 is a single workshop test pin for precise end‑size verification and reference gauging in production and inspection environments Precision tolerance ±0.002 mm Diameter 11.29 mm, length 50 mm Special steel for dimensional stability Workshop-grade single test pin Repeatable measurements with industrial-grade accuracy This gauge pin delivers a high level of measurement certainty thanks to its ±0.002 mm specification, which is suitable for demanding workshop controls and fine mechanical inspections. The compact diameter of 11.29 mm combined with a 50 mm length enables secure seating in fixtures and straightforward use with bench comparators or handheld gauges. By relying on a tightly specified pin, operators obtain repeatable reference points that make tolerance checks faster and lower the risk of rejected parts. Durable construction for stable reference points Made from special steel, the pin is designed to maintain its geometry under normal workshop handling and contact use. The choice of material supports dimensional stability during repetitive probing and reduces wear at contact points, extending the useful service life of the reference item. The workshop version build prioritises practical handling: a balance between stiffness and manageable mass (approx. 0.1 kg) that assists in quick, confident positioning without excess bulk. Practical integration into inspection and setup workflows Engineered as a single unit for plug‑and‑check duties, the pin suits end‑size verification tasks, fixture setting and quick go/no‑go checks on production lines. Its simple geometry makes it compatible with common gauging setups and manual inspection routines, accelerating cycle times and supporting quality control regimes. Using a defined reference like this pin reduces uncertainty at setup and helps maintain consistent part conformity across batches. Choose the Metav IndustryLine M323.B29 gauge pin for dependable end‑size control and contact Metav Werkzeuge in Emmerich for tailored advice and reliable dispatch Technical Data Article number: M323.B29 GTIN: 4061905066863 ECLASS: 21170231 Label: Prüfstift, einzeln, 11,29 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter (measuring range): 11.29 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop execution Delivery: single test pin Use case: end‑size verification FAQ What is the specified tolerance of this gauge pin? The M323.B29 gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for precise workshop and inspection tasks. Which applications suit this test pin best? This single test pin from Metav IndustryLine is intended for end‑size verification, fixture setting and reference gauging in production and inspection workflows. What material is used and why does it matter? The pin is made from special steel, chosen to provide dimensional stability and wear resistance for repeated contact checks. How is the item identified for ordering and stock management? The product is listed under article number M323.B29 with GTIN 4061905066863 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.2mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, tight tolerance and compact dimensions for reliable end-measure checks; order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for application-specific advice. Gauge pin M323.B20 — precision test pin, 11.2 mm × 50 mm A gauge pin M323.B20 for precision end-measure verification and workshop measurement tasks, suited to routine dimensional checks in production and inspection areas. Workshop-grade test pin, robust design Diameter 11.20 mm with ±0.002 mm tolerance Length 50 mm for end-measure verification Supplied in transport case for safe storage Precise diameter control for repeatable checks The compact test pin delivers high repeatability through a specified diameter of 11.20 mm combined with an accuracy of ±0.002 mm. This tight tolerance minimises measurement uncertainty when verifying bores, shafts or end dimensions, turning a simple accessory into a reliable quality-control instrument. The result is fewer rechecks and more consistent pass/fail decisions on the shop floor. Robust construction for workshop conditions Manufactured from special steel and finished for workshop use, the pin withstands the mechanical demands of regular handling and routine inspection cycles. The 50 mm overall length provides sufficient engagement for end-measure tasks while keeping the component easy to position and manoeuvre. Supplied as a single test pin in a protective transport case, the item remains protected during storage and transit, reducing the risk of dings that could affect accuracy. Practical fit for production and inspection workflows Designed for straightforward integration into existing metrology routines, the precision pin suits end-measure verification, gauge-setting tasks and comparative checks at the bench. The compact dimensions and workshop-grade specification make it a practical choice where space and repeatability matter. The product is identified as SKU M323.B20, enabling quick cross-reference in inventory systems and purchase orders. For assured end-measure performance, request the M323.B20 gauge pin from Metav Werkzeuge—our Emmerich team will advise on delivery options and suitability for specific inspection tasks. Technical data Article number: M323.B20 GTIN: 4061905065774 Brand: Metav IndustryLine Core specifications Diameter: 11.20 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version (workshop-grade execution) Material: special steel Supplied in a plastic or wooden transport case Single test pin for end-measure applications FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, providing tight dimensional control for end-measure verification. Which material is used for this test pin? The test pin is made from special steel, selected for stability and resistance against wear in workshop environments. Is the gauge pin supplied ready for storage and transport? Yes, the pin is supplied in a protective transport case to prevent damage during handling and storage. What applications is this pin best suited to? It is intended for end-measure checks, bore and shaft verifications and gauge-setting tasks in production and inspection workflows. How can the product be referenced in orders and inventory? Refer to SKU M323.B20 or GTIN 4061905065774 when ordering or updating stock records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.31mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability, robust special‑steel construction and compact handling for consistent fit checks in the workshop. Order the gauge pin M323.B31 directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.B31 — single 11.31 mm, 50 mm length (Workshop version) by Metav IndustryLine Gauge pin M323.B31 is a single inspection pin designed for precise fit verification and end‑measurement tasks in workshop and inspection environments. Workshop version Diameter 11.31 mm Length 50 mm Accuracy ±0.002 mm Consistent fit verification for repeatable results The M323.B31 functions as a straightforward, high‑precision gauge pin for checking bores, bushings and mating parts where dimensional interchangeability matters. With a diameter of 11.31 mm and an indicated accuracy of ±0.002 mm, the pin provides a reliable reference for go/no‑go assessment and clearance checks. The compact length supports well‑controlled contact conditions, reducing measurement scatter and enabling faster inspection cycles—an advantage in routine quality control where throughput and reproducibility are essential. The combination of measured tolerance and simple geometry makes this pin particularly effective for verifying fits during assembly checks or for quick shop‑floor inspections. Robust construction for daily workshop use Manufactured from special steel, the pin is intended for repeated handling and offers wear resistance appropriate to workshop conditions. The workshop version balances toughness with dimensional stability so that the pin withstands regular seating and extraction without rapid degradation. A modest mass assists with easy placement and stable seating during manual checks, while the solid material gives a tactile, durable feel. For operations where corrosion resistance or additional surface protection is required, the material base allows for downstream treatments; however, the supplied finish already supports standard inspection tasks and reliable contact performance. Integration into inspection routines and traceability The pin’s simple geometry and unique article reference ensure straightforward integration into inspection protocols and tool sets. Marked as M323.B31 and carrying GTIN 4061905066887, the component can be recorded in asset lists and picking systems to maintain traceability across production batches. Its dimension set—11.31 mm diameter and 50 mm length—permits predictable seating depths and repeatable placement, which reduces setup time on gauges and fixtures. By using standardised pins such as this one, laboratories and workshops can harmonise their reference artefacts, improving comparability between operators and across shifts. Ideal applications and practical benefits This inspection pin is suited to tasks where small, precise checks are required: bore verification, alignment aids during assembly, comparative seating tests and verification of finishing operations. The short, rigid form limits deflection and supports accurate seating in confined spaces, making it useful for jigs, fixtures and bench testing where accessibility is restricted. The clear numerical specification and workshop‑oriented design support efficient quality workflows, lowering the likelihood of ambiguous measurements and helping technicians make fast, evidence‑based decisions on part acceptance. For tailored advice on using the M323.B31 gauge pin in production or inspection setups, contact Metav Werkzeuge in Emmerich — telephone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com, and secure dependable measuring supplies for the workshop. Technical data Article number: M323.B31 GTIN: 4061905066887 Brand: Metav IndustryLine Material: Special steel Version: Workshop execution Facts Diameter: 11.31 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Single inspection/gauge pin Designed for fit and end‑measurement tasks Category: Gauge pins (Messstifte) FAQ What diameter does the pin have? The pin has a diameter of 11.31 mm, specified for precise fit and clearance checks. Is the M323.B31 suitable for routine bore checking? Yes; the M323.B31 gauge pin is intended for routine bore and fit verification in workshop inspection procedures. What level of accuracy can be expected? The pin is specified with an accuracy of ±0.002 mm, supporting repeatable go/no‑go assessments. What material is the pin made from? The pin is manufactured from special steel, chosen for durability and stable contact performance in workshop use. How is the component identified for procurement or stock? The article is listed as M323.B31 with GTIN 4061905066887, suitable for inventory and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.32mm Gauge Pin 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, micrometre-level accuracy (±0.002 mm) and compact handling for reliable end measurements; order the inspection pin directly via Metav Werkzeuge or contact their consultants for specification support. Test pin, single, 11.32 mm Ø, 50 mm length (M323.B32) — Metav IndustryLine The Test pin, single, 11.32 mm Ø, 50 mm length is an inspection pin designed for precise end measurements and bore checks in workshop environments, offering a compact gauge for repeatable verification tasks Workshop-grade design Diameter 11.32 mm precision Length 50 mm handling Tolerance ±0.002 mm Accuracy where small tolerances decide the outcome The compact inspection pin delivers ±0.002 mm manufacturing tolerance, enabling trustworthy go/no‑go assessments and dimensional verification in tight-tolerance operations. With a nominal diameter of 11.32 mm, the component is tailored for fine end measurements and reference checks where repeatability matters. The small form factor reduces measurement uncertainty caused by deflection and makes the pin particularly suitable for tasks that demand consistent contact geometry. Technical features are deliberately conservative to support rapid, reliable decisions on the shop floor and in quality control loops. Built for everyday workshop use and simple handling Engineered as a workshop-grade solution, this single test pin combines a 50 mm effective length with robust construction to withstand routine handling. The special steel construction provides mechanical strength and wear resistance during repeated seating and extraction cycles, while the single-piece supply format simplifies inventory and traceability. The compact mass and balanced geometry ensure comfortable use in manual checks and fixtures, reducing operator fatigue and accelerating inspection workflows in production and maintenance environments. Practical applications and system integration This inspection pin suits a range of metrological tasks, such as end‑face measurement, bore gauging and alignment controls on jigs and fixtures. Classified within the micro range (10–100 mm), it covers fine mechanical parts and microcomponents, offering a direct replacement or complement to conventional gauge pins in precision workshops. The product is referenced as M323.B32 for ordering and catalogue management; its straightforward dimensions and tolerance make integration into existing inspection routines and assembly checks uncomplicated and cost‑efficient. Choose the Metav IndustryLine M323.B32 inspection pin for dependable workshop measurements and consult Metav Werkzeuge for tailored procurement or technical clarification via their Emmerich team Technical Data SKU: M323.B32 GTIN: 4061905066894 Brand: Metav IndustryLine Facts Diameter: 11.32 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop-grade version Supplied individually Application: end measurements Category: Micro range (10–100 mm) FAQ What is the dimensional tolerance of this inspection pin? The inspection pin is manufactured to a tolerance of ±0.002 mm and is suitable for fine verification work. Which material is used for the pin? The M323.B32 inspection pin is made from special steel to provide wear resistance and mechanical durability for repeated use. For which measurement tasks is this pin intended? Typical uses include end‑face measurement, bore verification and alignment checks in fixtures and jigs where micro‑range dimensions are relevant. How is the item supplied and identified? The product is supplied individually and is listed under SKU M323.B32 for ordering and stock control. Which measurement class does this pin belong to? With a nominal diameter of 11.32 mm it falls into the micro range (10–100 mm), offering a compact solution for precision workshop checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com