Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
15.04mm Gauge Pin Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precision at ±0.002 mm, a 15.04 mm diameter and rugged workshop construction for reliable fit checks and reduced rework. Order the pin directly through Metav Werkzeuge or consult our team for application advice. Gauge Pin, Single 15.04 mm – 50 mm Length (Metav IndustryLine) The Gauge Pin, single 15.04 mm is a workshop-grade reference pin intended for dimensional checks, assembly inspection and go/no‑go verification in metrology and production settings. Workshop-grade design for robust use Diameter 15.04 mm with ±0.002 mm tolerance 50 mm special-steel body for stable handling Supplied in transport box for safe handling Precision that protects production quality A reference pin with a 15.04 mm nominal diameter and an indicated ±0.002 mm variation provides a reliable benchmark for fit and clearance checks. The tight tolerance reduces ambiguous results during inspection, which in turn lowers the rate of rework and scrap. By specifying a measured component with such accuracy, process control becomes more consistent: inspection decisions are based on clear numerical limits rather than visual approximation. The result is measurable time savings in the quality loop and a lower risk of downstream assembly issues. Durable workshop design for everyday handling Built as a workshop-grade tool from special steel, the pin combines practical robustness with the fine geometry required for repeatable assessments. A 50 mm length balances handling comfort and functional engagement in fixtures or bores, while the compact mass supports easy placement and withdrawal during quick checks. Because the item is supplied in a transport box, the reference surface and nominal diameter remain protected in storage and transit, preserving the measurement quality over repeated use and reducing the likelihood of damage that could invalidate inspection results. Simple integration into inspection workflows As a single gauge pin, this product is suited for inclusion in inspection trays, plug‑gauge sets or as a spare reference for calibration benches. The clear nominal size and documented tolerance allow planners to define pass/fail criteria without ambiguity, facilitating faster go/no‑go decisions at the workbench. Traceable identifiers such as the SKU and GTIN support inventory control and versioning in quality documentation. For production teams seeking fast measurable improvements in throughput and fewer ambiguous checks, the pin offers a compact, low‑effort upgrade to existing metrology routines. Contact Metav Werkzeuge for technical matching, delivery options and to secure this workshop-grade gauge pin: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge can advise on integration and supply from Emmerich. Technical data Article number: M323.F04 GTIN: 4061905068362 Brand: Metav IndustryLine Facts Diameter: 15.04 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Category: Gauge pins Materials & features Material: Special steel Version: Workshop execution Delivery: Transport box supplied Label: Gauge pin, single 15.04 mm FAQ Is the diameter tolerance suitable for precision assembly checks? The stated tolerance of ±0.002 mm makes the gauge pin suitable for fine fit and clearance assessments where tight dimensional control is required. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance under routine workshop use. Can this single pin be used as a replacement in existing gauge sets? Yes. The single gauge pin is intended for use as a reference or replacement element within plug‑gauge sets and inspection trays. How is the pin delivered to protect its measuring surfaces? Delivery includes a transport box to protect the pin during handling and storage, helping to preserve the reference surfaces. Is the product suitable for production line spot checks? Its compact form, clear nominal size and tight tolerance make the pin well suited for frequent spot checks and quick go/no‑go decisions Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.05mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, exacting ±0.002 mm tolerance and compact dimensions for dependable bore checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch requirements. Gauge pin, single, 15.05 mm × 50 mm (Metav IndustryLine) Gauge pin, single, 15.05 mm diameter and 50 mm length for precise plug checks and dimensional verification in workshop metrology Workshop-grade construction Diameter 15.05 mm for tight fits Length 50 mm for bore depth control Tolerance ±0.002 mm for high repeatability Accurate checks that reduce rework The compact gauge pin provides a simple, reliable means of confirming bore sizes and fit tolerances in serial production and setup routines. With a nominal diameter of 15.05 mm and a verified variation of ±0.002 mm, the pin supports fast go/no‑go-style assessments that minimise measurement guesswork and costly rework. The tight specification improves process control by making deviations immediately visible in routine checks, so inspection steps become a time‑efficient quality gate rather than a bottleneck. The precision achieved here is particularly valuable when consistent part interchangeability is required across multiple machines or shifts. Built for everyday workshop use Manufactured in special steel and offered in a workshop configuration, this test pin is designed to withstand frequent handling and direct use at the bench. The 50 mm length gives an effective contact surface for depth‑related checks without compromising manoeuvrability in confined setups. At approximately 0.1 kg, the component is easy to position yet sufficiently hefty to feel robust in use. The straightforward single‑piece design simplifies storage in inspection sets and reduces the number of handling steps during routine dimensional checks, supporting a smoother workflow on the shop floor. Integration into inspection routines and traceability The Metav IndustryLine gauge pin is suitable for repetitive verification tasks and can be incorporated into workholding and fixture checks as a reference artefact. Marked with the item identifier M323.F05, the pin is easy to log into inspection lists and tool inventories, helping to maintain traceability across production batches. Using a dedicated pin for repetitive gauging promotes consistent repeatability between operators and shifts, enabling clearer statistical process control and fewer ambiguous measurement results. For procurement, the clear article identification supports fast replenishment and inventory planning. Contact Metav Werkzeuge for availability, batch supply options and technical advice on the Metav IndustryLine gauge pin M323.F05 Technical Data SKU: M323.F05 GTIN: 4061905068379 Brand: Metav IndustryLine Core specifications Diameter: 15.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: Special steel Single test pin Category: Gauge pins FAQ What is the primary use of this gauge pin? The gauge pin M323.F05 from Metav IndustryLine is intended for plug‑gauge style checks, bore verification and quick dimensional confirmation in workshop and production environments. What accuracy does the pin deliver? The test pin is specified to ±0.002 mm, a tolerance that supports reliable pass/fail assessments and improved repeatability in routine inspections. What material and construction can be expected? The component is made from special steel in a workshop configuration, providing robustness for frequent handling and stable dimensional behaviour under normal shop conditions. How is the article identified for inventory and procurement? The item is listed as SKU M323.F05 and GTIN 4061905068379, simplifying inventory tracking and reordering for inspection sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.06 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Benefit from precise diameter control and robust workshop‑grade construction: the combination of ±0.002 mm tolerance and special steel material delivers repeatable end‑dimension checks and long service life. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single – 15.06 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single – 15.06 mm Ø, 50 mm length is a workshop‑grade reference pin intended for end‑dimension verification, fixture setting and production inspection tasks Workshop‑grade execution Diameter 15.06 mm for end‑dimension checks Tolerance ±0.002 mm Material: special steel, precision ground Consistent reference for dimensional checks A precision gauge pin provides a stable reference when verifying bore diameters, setting fixtures or checking mating parts. The specified 15.06 mm diameter combined with a tight ±0.002 mm tolerance reduces measurement uncertainty and supports reproducible go/no‑go assessments on the shop floor. Manufactured as a single, precision‑ground pin, this reference tool minimises the need for iterative adjustments and helps maintain throughput by cutting inspection time. Practical format for workshop use With a nominal 50 mm overall length, the pin balances reach and handling for typical workshop operations: long enough to engage bore seats and short enough for safe one‑hand positioning. The special steel construction offers wear resistance suitable for repeated seating and gentle knocking into fixtures, preserving dimensional fidelity over prolonged use. The compact weight and robust finish make the pin straightforward to integrate into fixture sets, pin stacks or portable inspection kits. Integration into quality processes and procurement Supplied as a single, workshop‑oriented reference pin from the Metav IndustryLine, this item supports routine process control and small‑series inspection tasks. The clear specification and industrial material choice facilitate procurement and spare‑part planning, while the precision class helps to reduce scrap and rework through reliable first‑pass verification. For manufacturers and machinists seeking a pragmatic balance of accuracy and durability, this gauge pin contributes to consistent production quality and smoother inspection workflows. Contact Metav Werkzeuge in Emmerich for tailored advice and supply of this Metav IndustryLine gauge pin — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.F06 GTIN: 4061905068386 Manufacturer: Metav IndustryLine Measurements Diameter: 15.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & Features Material: special steel Workshop‑grade execution Category: gauge pin (Messstifte) FAQ What is the declared tolerance of this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring tight dimensional control for reference measurements. Which material is used for the pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under workshop conditions. Is this pin suitable for fixture setting and bore checks? Yes, the 15.06 mm diameter and 50 mm length make this pin well suited for fixture alignment, bore verification and end‑dimension checks in production environments. How is the item delivered and identified? The product is listed as SKU M323.F06 and GTIN 4061905068386 for clear identification during procurement and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.07mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of dimensional accuracy and robust workshop design to streamline inspection tasks and reduce rework. The 15.07 mm gauge pin with ±0.002 mm tolerance and a 50 mm length offers reproducible reference measurements; order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.F07 — 15.07 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.F07 is a hardened reference pin for end‑measure checks and dimensional verification in workshop metrology. Precision diameter 15.07 mm with ±0.002 tolerance 50 mm overall length for stable handling Workshop version made from special steel Supplied in protective transport case Consistent accuracy for repetitive inspection This reference pin delivers high repeatability through a tight dimensional tolerance of ±0.002 mm, making it suitable where small deviations cause costly rework. The defined diameter of 15.07 mm functions as a reliable end‑measure standard for go/no‑go checks, gauge setting and fixture alignment. Using a hardened, single‑piece pin reduces measurement uncertainty compared with adjustable references, so inspection cycles run faster and quality records remain consistent. Robust design that withstands workshop use Crafted in special steel and offered as a workshop version, the component resists wear during frequent handling and contact with mating parts. The 50 mm overall length provides a comfortable grip and stable seating in gauges and fixtures, lowering the risk of unintended tilting during measurement. A protective transport case is supplied for secure storage and transport, helping to preserve surface condition and prolong service life under everyday workshop conditions. Practical integration into measuring routines The solid construction and clear specification enable straightforward integration into routine quality checks, fixture set‑ups and batch sampling. Traceable, repeatable reference points improve statistical process control and support faster decision‑making on the shop floor. The item is supplied as a single pin (SKU M323.F07), which simplifies inventory management while ensuring traceability of the reference used during inspection. For assured workshop accuracy, request the Metav IndustryLine M323.F07 from Metav Werkzeuge—contact the Emmerich specialists for availability and tailored technical advice Technical data Article number: M323.F07 GTIN: 4061905068393 Weight: 0.1 kg Material: Special steel Length: 50 mm Diameter: 15.07 mm Tolerance: ±0.002 mm Data Diameter: 15.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg GTIN: 4061905068393 Special features Workshop version Protective transport case included Category: Gauge pin Single piece delivery SKU: M323.F07 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.F07 is specified with a tolerance of ±0.002 mm, providing high repeatability for routine dimensional checks. Is the pin suitable for heavy use in a workshop environment? Yes, the workshop version is made from special steel and designed for frequent handling and contact with mating parts. How is the pin supplied for transport and storage? The product is delivered in a protective transport case to maintain surface condition and ensure secure storage. Can this pin be used for setting gauges and fixtures? The rigid, single‑piece design makes the pin ideal as a reference for gauge setting and fixture alignment in inspection workflows. What product identifiers should be used when ordering? Reference SKU M323.F07 and GTIN 4061905068393 when enquiring about this gauge pin Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.08 mm Test Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high precision and robust workshop design to secure reproducible fit checks and reliable end measurements; order the pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 15.08 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single, 15.08 mm, 50 mm length for precise fit verification and end‑measurement tasks in workshop inspection, assembly and quality control. High-precision ±0.002 mm tolerance Diameter 15.08 mm for tight fits 50 mm robust length for end measurements Workshop execution in special steel Engineered for consistent fit verification The component is manufactured to a ±0.002 mm tolerance, providing the kind of dimensional certainty required when checking mating parts, bores and shoulders. With a nominal diameter of 15.08 mm, the pin serves as a direct reference for go/no‑go checks and conformity testing, reducing ambiguity in acceptance decisions. The controlled geometry and surface finish support fast tactile checks and improve repeatability during serial inspection runs, so process deviations are identified early and corrected before escalation. Durability that keeps inspection moving Constructed from special steel, the item resists wear and retains its measuring geometry under regular workshop use. The 50 mm length offers sufficient engagement for end‑measurements while remaining compact enough for quick handling and storage. The workshop execution emphasises robustness and practical ergonomics: straightforward handling reduces inspection time per part and lowers the risk of accidental damage during routine checks. A lightweight feel assists with rapid manual positioning without compromising stability. Simple integration into quality routines Designed as a single inspection and reference element, the pin slots easily into existing gauge sets, fixture checks or handheld verification procedures. Its dimensional stability supports consistent fit verification across batches, which simplifies documentation and eases communication between production and quality teams. When traceable lab calibration or specific measurement workflows are required, the pin functions reliably as a local standard within a controlled process, supporting clear pass/fail criteria and fewer ambiguous measurement results. For secure fit checks and dependable end measurement in everyday workshop use, choose the Metav IndustryLine gauge pin M323.F08 — contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.F08 GTIN: 4061905068409 Label: Prüfstift, einzeln, 15,08 mm Länge 50 mm Numbers / Core technical data Diameter: 15.08 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Variant: Single gauge pin Designation: Workshop execution Category: Gauge pins FAQ What measurement accuracy does the pin provide? The pin is manufactured to a tolerance of ±0.002 mm, giving high‑precision results suitable for tight fit checks and routine inspection. Which materials is the pin intended to check? As a gauge pin for mechanical verification, it is used to test dimensional fits and bore conformity on typical workshop materials; selection of the mating component material does not affect the pin's measurement properties. Is the pin suitable for integration into existing gauge sets? Yes, the single inspection pin is designed for straightforward integration as a reference pin within gauge arrays, fixtures or handheld checking procedures. How is the item delivered and identified? The product is supplied as a single workshop‑grade gauge pin and is listed under article number M323.F08 with GTIN 4061905068409 for unambiguous identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.09mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control, robust workshop construction and a compact footprint for fast end‑measure verification; the combination of Ø15.09 mm nominal diameter, 50 mm functional length and a displacement tolerance of ±0.002 mm supports reproducible in‑process checks — order directly via Metav Werkzeuge or consult the technical team for application advice. Gauge pin M323.F09 — single test pin Ø15.09 mm, 50 mm length (Metav IndustryLine) The gauge pin Ø15.09 mm (50 mm length) is a workshop‑grade test pin designed for fast end‑measure verification, alignment and go/no‑go checks in precision assembly and inspection. Workshop‑grade construction Nominal diameter Ø15.09 mm, length 50 mm High repeatability with ±0.002 mm tolerance Manufactured from special steel Rapid, reliable dimensional checks for production This test pin provides a compact and repeatable way to verify bore sizes, alignment and end measures directly at the workbench. With a nominal diameter of Ø15.09 mm and a functional length of 50 mm, the pin is sized for common small‑bore verifications while remaining easy to handle. The tight displacement tolerance of ±0.002 mm translates into consistent pass/fail decisions, reducing scrap and avoiding time‑consuming rework. For inspection routines, the compact geometry enables quick insertion and withdrawal, improving throughput during batch checks and machine set‑ups. Durable workshop design that keeps inspections running Manufactured from special steel, the component is engineered for abrasion resistance and sustained dimensional stability under frequent use. The workshop‑grade finish resists handling wear and supports stable contact conditions, which improves measurement repeatability over many cycles. The modest mass (approx. 0.1 kg) and balanced form factor make the pin suitable for handheld checks and for use with simple fixtures or bench mountings. These characteristics ensure long service life and low maintenance input, which is beneficial for busy production environments. Integration into inspection processes and traceable identification The pin is supplied as a single unit under SKU M323.F09 and can be included in standard measurement sets for small‑bore inspection. Its compact size and well‑defined functional length make it suitable for end‑measure verification, alignment checks and quick go/no‑go style routines in assembly or quality control. Marked product identifiers allow straightforward inventory management and traceability in inspection documentation, supporting consistent quality records for production batches and audits. Contact Metav Werkzeuge today for specification matching, batch availability and application recommendations for the Metav IndustryLine gauge pin M323.F09 — our specialists at Emmerich support technical queries and procurement for all metrology needs Technical data Article number: M323.F09 GTIN: 4061905068416 Label: Prüfstift, einzeln, 15,09 mm Länge 50 mm Core dimensions and tolerances Nominal diameter: 15.09 mm Functional length: 50 mm Tolerance / runout: ±0.002 mm Weight: 0.1 kg Materials and special features Material: Special steel Version: Workshop execution Story trigger / intended use: end‑measure verification FAQ What diameter and length does this gauge pin have? The gauge pin is specified with a nominal diameter of 15.09 mm and a functional length of 50 mm, supplied as the single‑piece unit M323.F09 from Metav IndustryLine. How precise is the test pin for inspection tasks? The test pin offers a displacement tolerance of ±0.002 mm, providing the level of repeatability required for reliable pass/fail checks in production control and alignment verification. Which material is used for the pin and what are the benefits? Constructed from special steel, the pin combines wear resistance and dimensional stability, which supports sustained repeatability under frequent workshop use. Can the pin be used for go/no‑go style checks and alignment? Yes — the compact geometry and precise diameter make it suitable for go/no‑go verifications, alignment checks and quick end‑measure inspections in assembly and QC routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.11mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade inspection pin that combines tight ±0.002 mm tolerance with a precise 15.11 mm nominal diameter and a practical 50 mm shank length; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.F11 — 15.11 mm diameter, 50 mm length, Metav IndustryLine The gauge pin M323.F11 is a single-piece, workshop-grade inspection pin suited to end-measure checks and fit verification in production and assembly environments. Workshop-grade inspection pin 15.11 mm nominal diameter, 50 mm length ±0.002 mm dimensional accuracy Made from special steel, single piece supply Consistent dimensional control for production reliability The combination of a 15.11 mm nominal diameter and ±0.002 mm tolerance delivers reliable, repeatable results for end‑measurement tasks. As a precision inspection aid, the pin reduces uncertainty in bore checks and helps maintain process stability by providing a verified reference diameter. The compact 50 mm shank facilitates insertion into shallow bores and fixtures while the tight tolerance supports statistical process control and reduces non‑conforming parts. This pragmatic precision contributes directly to lower rework rates and steadier throughput. Built for workshop handling and long service life Constructed in special steel and supplied as a single item, this inspection pin is designed for the demands of a workshop environment. The 50 mm length balances accessibility and rigidity, keeping deflection low during routine checks. The workshop specification emphasises robustness: the component resists frequent handling and stays suitable for standard inspection routines. Where quick, dependable gauge work is required, this pin offers an economical way to standardise checks without compromising durability or repeatability. Fast integration into inspection workflows The inspection pin is optimised for straightforward adoption across common metrology setups and assembly lines. Its nominal size and clear tolerance rating make it simple to document in control plans and use as a reference in go/no‑go procedures or measurement fixtures. The single‑piece supply avoids selection ambiguity, and the clearly stated technical parameters support traceable quality routines. For teams seeking efficient, measurable improvements in inspection throughput, this pin provides an immediate, low‑complexity solution that aligns with professional process control practices. Contact Metav Werkzeuge for tailored advice on implementing the M323.F11 in existing inspection processes or to request delivery details directly from our Emmerich site. Technical Data Article number: M323.F11 GTIN: 4061905069277 Manufacturer: Metav IndustryLine Facts Nominal diameter: 15.11 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single-piece supply Material: Special steel Intended use: end measurement (endmasse) FAQ What tolerance does the pin offer? The M323.F11 is specified with an accuracy of ±0.002 mm, providing tight dimensional control for routine checks. Is the pin suitable for bore verification and end‑measure checks? Yes, the inspection pin is intended for end measurement and bore verification tasks, where the 15.11 mm nominal diameter and ±0.002 mm tolerance support reliable fit checks. What material is used for this inspection pin? The pin is manufactured from special steel, chosen for workshop durability and dimensional stability. Is the item supplied individually or as a set? The M323.F11 is supplied as a single piece to simplify identification and integration into inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.12mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
A compact precision solution combining ±0.002 mm tolerance and workshop‑grade special steel for repeatable end‑measure checks; ideal for fixture verification and final gauging. Order the test pin directly via Metav Werkzeuge or consult our technical advisers for application support. Test pin M323.F12 — 15.12 mm gauge pin, 50 mm length (Metav IndustryLine) The Test pin M323.F12 is a single precision gauge pin designed for end‑measure verification and fixture alignment in metrology and workshop inspection routines. Precision ±0.002 mm Diameter 15.12 mm Length 50 mm Workshop‑grade special steel Consistent accuracy for process control The M323.F12 delivers high repeatability with a specified positional tolerance of ±0.002 mm, making it suitable for fine comparative checks and control points in production. That measured capability reduces variability in pass/fail decisions and supports efficient quality workflows. As a hardened precision pin made from special steel, it maintains form and concentricity over repeated use, so inspection results remain stable and comparable across shifts. The compact 50 mm length keeps the contact geometry straightforward, helping to avoid ambiguous readings during quick go/no‑go tests. Durable format built for workshop use Designed as a workshop execution, this single gauge pin combines robustness with simple handling. The 15.12 mm diameter and smooth cylindrical form fit common locating holes and fixtures, enabling fast insertion and tactile confirmation when aligning components or checking bores. Its modest mass aids controlled placement while the engineered surface finish minimises marking and scuffing on mating parts. The solid material choice and single‑item supply suit repair benches and toolrooms that require an immediately available, traceable reference pin for routine inspections. Integrates into inspection routines and reduces rework As a dedicated gauge element, this precision pin streamlines end‑of‑line checks and fixture set‑up: compare component bores, verify datum positions or use as a reference for depth and step checks. The simple geometry supports both manual measurement workflows and integration into jig‑based inspection systems without additional adaptation. By cutting down on setup uncertainty and speeding verification steps, the pin contributes directly to lower rework rates and improved machine uptime, delivering measurable operational benefits to workshop and production environments. Contact Metav Werkzeuge today for procurement advice on the M323.F12 test pin or speak with our consultants about integrating this gauge into existing inspection processes Technical data Article number: M323.F12 GTIN: 4061905069284 Manufacturer: Metav IndustryLine Facts Diameter: 15.12 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Execution: Workshop version Single item supply Category: Gauge pin / Test pin FAQ What inspection tasks is this gauge pin intended for? The M323.F12 gauge pin is intended for end‑measure verification, fixture alignment and basic bore/datum checks in metrology and workshop inspection routines. Is the test pin supplied with a calibration certificate? No calibration certificate is included with the M323.F12; the product is supplied as a precision gauge pin without documented calibration. Which materials are compatible for contact with this pin? The pin is made from special steel and is suitable as a contact reference for typical ferrous and machinable components where a hardened steel pin is appropriate. Can the pin be used in automated or jig‑based inspection systems? Yes; the simple cylindrical geometry and standard diameter make the gauge pin suitable for integration into jigs, fixtures and manual or semi‑automatic inspection set‑ups. How should the gauge pin be stored to preserve accuracy? Store the pin in a dry, clean environment, protected from impacts and heavy contaminants; use a padded compartment or rack to avoid knocks that could affect the form or surface finish. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.13mm Test Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade durability and micrometric accuracy for reliable inspection and setting tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for set recommendations and bespoke guidance. Gauge pin M323.F13 — single test pin Ø 15.13 mm, length 50 mm (Metav IndustryLine) A gauge pin M323.F13, a single workshop test pin for precise end‑measurements and inspection tasks in industrial metrology Workshop-grade special steel construction Diameter 15.13 mm for precise end measurements Length 50 mm for compact inspection tasks Tight tolerance ±0.002 mm for high accuracy High precision for repeatable inspection results The M323.F13 inspection pin is engineered for precision where repeatability matters. With a nominal diameter of Ø 15.13 mm and a verified runout tolerance of ±0.002 mm, this single gauge pin supports consistent go/no‑go checks and dimensional verification in production and QA workflows. The tight tolerance reduces uncertainty during serial checks, which helps to avoid rework and to maintain stable process capability in machine shops and small series production. The solid design is optimised for use with pin racks, jigs and simple plug gauges, turning a basic test into a reliable quality gate. Robust workshop design for daily use Constructed from special steel and specified as a workshop‑grade item, the inspection pin balances wear resistance and handling convenience. The compact length 50 mm makes it ideal for confined inspection setups and for insertion into fixtures without compromising accessibility. Delivery includes secure transport packaging: a protective plastic or wooden box is provided to prevent damage during storage and transit. The robust finish preserves dimensional integrity under frequent use, providing a practical lifetime advantage in demanding shop‑floor environments. Versatile application across inspection and assembly This single gauge pin is suitable for end measurements, hole gauging and assembly alignment tasks, offering a pragmatic solution for bench checks and fixture set‑ups. As a discrete inspection element it integrates easily into existing metrology routines and is handy for ad‑hoc verification during set changes. The compact mass and geometry enable fast handling in repetitive processes, supporting efficient part sorting and immediate decision‑making at the machine or inspection bench. For larger gauge requirements, the pin can be combined into matched sets or used as a reference member within a collection of inspection pins. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge to request the M323.F13 gauge pin or tailored sets, shipped from Emmerich with secure transport packaging Technical data Article number: M323.F13 GTIN: 4061905069291 Label: Gauge pin, single, Ø 15.13 mm, length 50 mm Category: Gauge pins Facts Diameter: 15.13 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop design for daily use Delivery in protective plastic or wooden box for transport Ideal for end measurements, hole gauging and fixture alignment FAQ What is the accuracy class of this gauge pin? The M323.F13 gauge pin is specified with a displacement tolerance of ±0.002 mm, suitable for high‑precision workshop inspections and repeatable go/no‑go checks. Can this pin be used for hole gauging and fixture alignment? Yes, the single test pin is designed for end measurements, hole gauging and alignment duties; its Ø 15.13 mm diameter and compact length make it well suited to those applications. What material is the M323.F13 made from? The inspection pin is manufactured from special steel, providing a balance of wear resistance and dimensional stability in regular workshop use. Is the pin supplied ready for transport and storage? The gauge pin is delivered in protective transport packaging (plastic or wooden box) to prevent handling damage during shipping and to simplify storage between inspections. Can this single pin be integrated into a set or larger measurement system? Yes, the M323.F13 can be used individually or combined with other pins and fixtures for matched sets, reference racks or assembly jigs to support process control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.14mm Test Pin, Single, 50mm Length, Workshop Finish - Metav IndustryLine
Compact workshop test pin combines ±0.002 mm repeatability with a 15.14 mm diameter and a compact 50 mm length; robust special steel construction and delivery in a transport case ensure safe handling and long service life. Order the part directly via Metav Werkzeuge or consult our advisors for integration into inspection workflows. Test Pin M323.F14 — single inspection pin, Ø 15.14 mm, 50 mm length (Metav IndustryLine) The Test Pin M323.F14 is a single inspection pin designed for precise end‑measurement and reference tasks in workshop inspection and gauging applications. Workshop version for robust use Diameter 15.14 mm for precise end measurements Length 50 mm, compact and easy to handle Accuracy ±0.002 mm for high repeatability Reliable precision for small-range end measurements The M323.F14 test pin is built to deliver consistently reproducible results thanks to its accuracy ±0.002 mm, a specification that places it in the high-precision category for mechanical gauging. Classified in the micro range (10–100 mm), this pin is optimised for short-span end‑measurement tasks where stiffness and minimal lever error matter most; the 50 mm length keeps the effective measuring geometry compact and limits flexure during handling. For routine inspection and end‑of‑line checks, the fine tolerance reduces rework and supports dependable pass/fail decisions without extensive setup time. Durable workshop construction for everyday use Constructed from special steel in a workshop‑grade finish, the pin offers a balance of wear resistance and surface stability suitable for repetitive contact with workpieces and fixtures. The compact form factor and modest mass (approx. 0.1 kg) simplify handling in tight setups and when fitting into dedicated holders or block gauges. The workshop version designation reflects protective machining and dimensional stability intended for daily shop environments, where robust components lower the frequency of replacements and help maintain process continuity. Ready for integration into gauging and fixture routines Delivered as a single, ready‑to‑use inspection pin and supplied in a transport case, the M323.F14 is straightforward to store and move between measuring stations. The geometry and tolerance make it suitable as an end‑measurement reference, insertion gauge or datum pin in fixture validation and inspection jigs. Traceability is supported through the visible SKU and GTIN, enabling structured inventory control and quicker identification when assembling gauge sets or replacing individual pins. As a single‑piece solution, it complements modular gauging systems and standard holder interfaces commonly used in workshops. For workshop-ready accuracy and dependable reference measurements, obtain the Metav IndustryLine Test Pin M323.F14 from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for stock details and technical advice Technical Data SKU: M323.F14 GTIN: 4061905069307 Brand: Metav IndustryLine Label: Test pin, single, Ø 15.14 mm, length 50 mm Facts Diameter: 15.14 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Delivered in transport case Single inspection/test pin Application: end measurements FAQ What measurement applications suit this test pin best? The Test Pin M323.F14 from Metav IndustryLine is optimised for end measurements and reference tasks in workshop gauging, fixture checks and short‑span inspection routines. Is the pin suitable for regular shop use and repeated contact? Yes, the workshop execution and special steel construction of the M323.F14 provide wear resistance and stability for frequent use in production environments. Which interfaces or holders are compatible with the test pin? The single test pin is designed to work with standard holder systems and modular gauge blocks commonly used in workshop metrology; compatibility depends on the chosen holder dimensions. How is the product identified for inventory and ordering? Identification is possible via the SKU M323.F14 and GTIN 4061905069307, which are both shown for clear stock management and reordering. Can the test pin be included in gauge sets for fixture verification? Yes, the M323.F14 functions as a reference or datum pin in gauge assemblies and is suitable for fixture validation where a compact, precise end measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.15mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, ±0.002 mm repeatability and a compact 50 mm length for reliable end‑measurement and alignment tasks. Order the gauge pin directly via Metav Werkzeuge or consult our advisers for specification support and fast supply. Gauge pin M323.F15 — 15.15 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measurements and alignment checks in workshop and inspection environments, providing a compact tool for repeatable fits and go/no‑go testing. Workshop‑grade gauge pin Diameter 15.15 mm for tight fits Length 50 mm for probing and reference Accuracy ±0.002 mm Reduce rejects with measurable precision The compact probe is manufactured from special steel and engineered to deliver ±0.002 mm variation, making it suitable where dimensional certainty prevents costly rework. The controlled diameter of 15.15 mm ensures consistent reference surfaces for end‑measurements and plug gauges; this stability helps to shorten inspection cycles and supports predictable assembly tolerances. The robust finish resists routine wear in a workshop environment. Designed for dependable workshop use At 50 mm overall length, this single gauge pin balances reach and rigidity: long enough for most probing tasks, yet short enough to remain torsionally stable when used manually or in fixtures. The workshop version construction provides straightforward handling and a durable geometry that tolerates repeated seating in bores and locating features. Typical tasks include alignment checks, bore gauging and dimensional spot checks during production runs. Simple integration into inspection routines As a discrete reference element, the pin suits both handheld checks and fixture‑based inspection systems. The small mass aids quick positioning, while the defined diameter supports repeatable seating and minimal measurement setup. For production environments that prioritise throughput, the pin’s consistent geometry reduces decision time at inspection points and integrates easily into existing gauges or jigs without complex adjustments. Contact Metav Werkzeuge for immediate availability of Metav IndustryLine gauge pins and for technical guidance on fitment and usage at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F15 GTIN: 4061905069314 Brand: Metav IndustryLine Material: Special steel Accuracy variation: ±0.002 mm Dimensions & precision Diameter: 15.15 mm Length: 50 mm Weight: 0.1 kg Features & applications Workshop version Single gauge pin for end measurements Suitable for alignment and plug‑gage tasks Compact geometry for repeatable seating FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.F15 from Metav IndustryLine is specified with an accuracy variation of ±0.002 mm, giving reliable repeatability for end‑measurement and fitting tasks. Is the pin suitable for fixture integration? Yes, the 50 mm length and compact mass make the pin suitable for both handheld checks and fixture or jig mounting within inspection systems. Which material is used for the pin and what does that mean for wear resistance? The M323.F15 is made from special steel, a choice that combines dimensional stability with workshop‑grade wear resistance for routine seating and probing. Can this pin be used for alignment of mating parts? The defined 15.15 mm diameter of the gauge pin offers a stable reference for aligning bores and mating components during assembly and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.16mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
The combination of ±0.002 mm tolerance and a 50 mm hardened shaft provides a reliable reference for go/no‑go checks and end‑measure verification; its special steel construction sustains repeated contact without rapid wear. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, Ø 15.16 mm — 50 mm length (Metav IndustryLine) Gauge pin, single, Ø 15.16 mm, 50 mm length is a compact precision reference pin for quick dimensional checks and hole gauging in workshop metrology Workshop version with robust design Diameter Ø15.16 mm with ±0.002 mm tolerance Hardened special steel for low wear Compact 50 mm length for confined spaces Accurate reference for routine inspections A precision reference pin with ±0.002 mm geometric tolerance supports reproducible verification of bore sizes and end dimensions. The tight tolerance reduces uncertainty during go/no‑go checks and final inspection tasks, meaning fewer rework cycles and more consistent quality control. Thanks to the compact 50 mm shaft the pin is easy to position in confined fixtures, while the Ø15.16 mm diameter matches standard inspection gauges and measuring fixtures. This delivers measurable time savings in repetitive testing and a clear improvement in process reliability. Durable workshop design that endures daily use Engineered as a workshop version, the pin is made from special steel and heat treated to resist wear from repeated contact checks. The material choice ensures a hard but tough surface that tolerates standard handling and moderate knocks without loss of form. The construction yields a low-maintenance reference tool: stable geometry over many cycles means fewer replacements and steady measurement performance. The relatively low mass simplifies handling while maintaining the stiffness needed for accurate seating in bores and against datum faces. Integrates easily into established measuring routines This precision test pin is readily incorporated into existing inspection jigs, bench setups and handheld checks. The standard diameter and short length suit end‑measure routines, quick functional tests and calibration checks where a compact, stable reference is required. Where traceability is needed, the item’s unique identifiers and workshop specification allow straightforward documentation in inspection logs. The plug‑in nature supports fast changeovers between checks, improving throughput in busy quality departments. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge pin Ø15.16 mm, 50 mm length, or to request further technical information by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: M323.F16 GTIN: 4061905069321 Label: Gauge pin, single, Ø 15.16 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 15.16 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Accuracy class: ±0.002 Special features Material: special steel Version: workshop execution Intended use: dimensional reference / bore verification Application: end‑measure and go/no‑go checks FAQ What measurements is this gauge pin suitable for? This gauge pin is intended for end‑measure verification and bore checks; the Ø15.16 mm diameter and ±0.002 mm tolerance make it suitable for precise go/no‑go assessments and functional verifications. Is the pin corrosion resistant or treated for wear? The pin is made from special steel with a hardened surface for wear resistance; the workshop design prioritises durability under routine inspection conditions. Can this test pin be used in prefabricated fixtures and jigs? Yes; the standard diameter and compact 50 mm length are compatible with common inspection fixtures and support quick integration into existing measuring routines. How tight is the manufacturing tolerance and what does it mean for inspection? With a tolerance of ±0.002 mm, the pin provides a stable reference for repeatable checks, reducing variability in go/no‑go assessments and helping to ensure consistent production quality. Which product identifiers should be used when documenting this item? Refer to SKU M323.F16 and GTIN 4061905069321 for procurement and traceability; these identifiers correspond to the Metav IndustryLine gauge pin in workshop execution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.17mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact workshop pin that combines high dimensional accuracy and a robust special‑steel construction for reliable end‑size verification; order directly via Metav Werkzeuge or consult the Metav team if further advice is required. Gauge pin, single, 15.17 mm, length 50 mm — workshop single gauge pin with ±0.002 mm accuracy (Metav IndustryLine) Gauge pin, single, 15.17 mm, length 50 mm designed for precise end‑measure checks and compact fixture access in inspection and assembly tasks. Workshop version for robust daily use Diameter 15.17 mm for precise end-size checks Length 50 mm for compact fixture access Special steel with ±0.002 mm tolerance Precision for repeatable end‑size checks A workshop‑grade plug designed for consistent measurement results: the pin provides a nominal diameter of 15.17 mm with a verified run tolerance of ±0.002 mm, making it suitable for fine verification jobs where dimensional fidelity matters. The special steel body offers stable geometry and wear resistance under frequent seating and release, reducing the need for constant replacement. The narrow diameter range places this tool in the micro range (10–100 mm) category, where short measuring lengths and high stiffness support repeatable positioning in fixtures and jigs. For quality control, the combination of tight tolerance and resistant material translates into fewer false rejects and faster inspection cycles. Compact length and workshop durability for tight spaces With a 50 mm overall length the pin reaches into confined bores and assembly points without excess overhang, allowing ergonomic handling on the shop floor and secure seating in manual or semi‑automatic checks. The workshop version specification means the design balances robustness and machinability: chamfers and a polished cylindrical surface ease insertion and reduce marking on mating parts. This compact format is particularly advantageous when access is limited or when multiple sequential measurements must be taken on small components; operators benefit from quicker handling and reduced setup time, which supports efficient throughput in repetitive inspection tasks. Simple integration into inspection workflows The single‑piece design is intended for straightforward use as a comparative or reference pin in end‑measure routines, datum checks and go/no‑go fixtures. Its dimensional stability supports traceable in‑process checks and aligns with common metrology practices for plug gauges and master pins. The component’s modest mass and compactness simplify storage and handling in instrument sets, and the specified ±0.002 mm tolerance aids in classifying this item for tasks that demand high repeatability rather than laboratory‑grade submicron measurement. For procurement and stock planning, the unitary form factor makes it easy to replace individual pins without changing full sets. For purchase options or technical clarification regarding this Metav IndustryLine gauge pin, contact Metav Werkzeuge for precise advice and local delivery from Emmerich. Technical data Article number: M323.F17 GTIN: 4061905069925 Label: Prüfstift, einzeln, 15,17 mm Länge 50 mm Dimensions & core values Diameter: 15.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features & materials Material: special steel Version: workshop execution Category: micro range (10–100 mm) FAQ What accuracy can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, which supports high repeatability for workshop inspection tasks. Is the pin suitable for use in tight bores and compact fixtures? Yes, the 50 mm length and compact diameter are designed for access in confined assembly areas and fixture applications. What material is the pin made from and why does it matter? The pin is made from special steel; this material provides wear resistance and dimensional stability for frequent seating operations. Is a calibration certificate supplied with this item? The product data does not specify a supplied calibration certificate for this gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.18mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise, workshop-hardened design combined with tight manufacturing tolerances to secure reproducible inspection results; order the test pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.F18 gauge pin — single test pin, 15.18 mm Ø, 50 mm length (Metav IndustryLine) The M323.F18 gauge pin is a single, workshop-grade test pin for dimensional reference and end‑measure verification in inspection and fixture applications. Workshop-grade construction for everyday use Diameter 15.18 mm with ±0.002 mm tolerance Length 50 mm for insertion and reference tasks Made from special steel for wear resistance Consistent fits and measurable repeatability A precision gauge pin serves as the physical reference in many inspection and assembly tasks; this workshop variant delivers a 15.18 mm diameter with a manufacturing tolerance of ±0.002 mm, ensuring repeatability across repeated checks. Such tight tolerances reduce uncertainty in go/no‑go and reference measurements, which in turn helps to avoid unnecessary rework and streamlines quality control. The controlled diameter and finish make the pin suitable for locating, calibrating, and verifying bores and fits where a reliable reference dimension is required. Durable workshop design that tolerates regular handling Built as a workshop‑grade tool, the pin combines a practical 50 mm length with a robust surface and special steel construction to withstand frequent insertion and extraction. The chosen material and heat treatment focus on wear resistance, prolonging service life under typical bench‑top use. The compact geometry eases handling during fixture set‑up and allows straightforward storage alongside other inspection aids, while maintaining the dimensional integrity expected from a dedicated test pin. Easy integration into inspection and fixture workflows This single test pin is designed for straightforward use in checking bores, aligning gauges and as a reference element in jigs and fixtures. Its simple geometry supports fast, repeatable reference checks, while the standardised diameter fits common gauge blocks and locating sleeves. For operations that demand consistent physical references without complex setup, the pin brings efficiency: fewer adjustment steps, quicker verification cycles and clearer pass/fail decisions — all contributing to faster throughput on the production floor. Choose the Metav IndustryLine workshop gauge pin for consistent dimensional control and contact Metav Werkzeuge in Emmerich for tailored procurement advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.F18 GTIN: 4061905069932 Material: Special steel Weight: 0.1 kg Diameter: 15.18 mm Length: 50 mm Tolerance: ±0.002 mm Facts Length: 50 mm Diameter: 15.18 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Workshop execution Single test pin (individual) Category: Messstifte SKU (shop): M323.F18 FAQ What is the nominal diameter and tolerance of the test pin? The M323.F18 gauge pin is manufactured to a nominal diameter of 15.18 mm with a tolerance of ±0.002 mm, suitable for precise reference and fit checks. How long is the pin and what applications suit this length? With a 50 mm length, the pin is ideal for insertion checks, fixture locating and short‑reach reference measurements in workshop and inspection routines. Which material is used and how does it affect durability? Constructed from special steel, the pin offers enhanced wear resistance and stable dimensions under regular handling, improving service life in day‑to‑day inspection tasks. Is the pin suitable for use in go/no‑go or alignment fixtures? Yes, the straightforward geometry and tight tolerance make the pin appropriate as a reference element in go/no‑go checks, alignment operations and as a locating aid in fixtures. Can this pin be used with standard locating sleeves and gauge blocks? The standardised 15.18 mm diameter is compatible with commonly used locating sleeves and gauge accessories, facilitating quick integration into existing inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.19mm Test Pin, Single, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
A compact, workshop-grade test pin in special steel with a nominal diameter of 15.19 mm and a length of 50 mm, offering a tight tolerance of ±0.002 mm for reproducible end‑measure checks; order directly via Metav Werkzeuge or consult their product specialists for integration into inspection routines. Test pin M323.F19 – precision gauge pin, Ø 15.19 mm, 50 mm length (Metav IndustryLine) A Test pin, single, 15.19 mm, 50 mm designed for reliable end‑measure checking and gauge-setting tasks in workshop inspection and production environments Workshop-grade design Ø 15.19 mm nominal gauge High repeatability ±0.002 mm High-precision control for reliable inspection results The M323.F19 is engineered for repeatable dimensional checks where traceability and tight tolerances matter. With a certified manufacturing tolerance of ±0.002 mm, the pin provides a measurable and consistent reference for end‑measure comparisons and go/no‑go evaluations. The fine tolerance reduces uncertainty in acceptance testing, which in turn improves process yields and limits rework. As a single, fixed-diameter reference, it simplifies comparative checks against gauges, fixtures and mating parts. Robust workshop usability and ergonomic handling Supplied as a single test pin in a compact format, this workshop version combines functional length with ease of handling: the 50 mm shaft reaches recessed seats while remaining stiff enough for quick manual placement. Constructed from special steel, the pin resists routine wear and supports repeated use in inspection benches and assembly jigs. The compact mass and balanced geometry make positioning straightforward during rapid quality checks, helping maintain throughput without compromising measurement integrity. Industrial sourcing with dependable service continuity Sourcing this precision component through Metav leverages a supply chain geared to industrial needs: consistent stock management and a focused quality filter at the Emmerich location help to secure ongoing availability for production and service teams. The compact gauge format is particularly suitable for repetitive end‑of‑line checks, small-batch inspection and fixture calibration, providing a simple yet effective tool to raise inspection confidence across machining and assembly operations. Discuss integration of the M323.F19 with Metav Werkzeuge — request specification support or quantity availability directly from Metav Werkzeuge at info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: M323.F19 GTIN: 4061905070297 Manufacturer: Metav IndustryLine Facts Diameter: 15.19 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Supply form: single test pin Intended use: end‑measure checking / gauge setting Design: workshop execution FAQ What tolerance does this test pin offer? The test pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end‑measure checks. What material is used for the pin? The M323.F19 is made from special steel, chosen for durability and wear resistance in routine inspection tasks. Which inspection tasks suit this gauge? The pin is intended for end‑measure checking, gauge setting, plug‑in comparisons and simple go/no‑go evaluations in workshop and production environments. Is the pin supplied as a single item or in sets? This article is supplied as a single test pin, described as a single unit for flexible use in fixtures and checks. Can the pin reach recessed seats or bores? With a shaft length of 50 mm, the pin is suitable for reaching many recessed seats and shallow bore features commonly inspected on workshop components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.1mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a workshop-grade test pin that combines dimensional reliability, robust material and compact handling for precise end‑measurement tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — Ø 15.1 mm, length 50 mm (Metav IndustryLine) The gauge pin, single, Ø 15.1 mm, length 50 mm serves as a precision end‑measurement pin for inspection, fixture setting and routine workshop checks. Workshop version for robust daily use Diameter Ø 15.1 mm, length 50 mm Dimensional accuracy ±0.002 mm Supplied in transport box for protection Consistent accuracy that reduces rework The gauge pin delivers a measured tolerance of ±0.002 mm, a level of precision that supports reliable go/no‑go checks and repeatable seating in inspection fixtures. Such tight dimensional control minimises the need for rework and accelerates decision processes on the shop floor, turning measurement data into actionable quality outcomes. The specified tolerance is suitable for fine workshop inspection where clear pass/fail criteria are required and contributes to stable process control. Built for the workshop: robust material and compact handling Made from special steel, the test pin combines wear resistance with low distortion under typical workshop use. The compact 50 mm length and Ø 15.1 mm diameter provide a stiff, easy‑to‑position gauge that is comfortable to handle and quick to install in jigs or bench fixtures. Delivered in a transport box, the component remains protected during storage and transit, which supports long‑term dimensional stability and reduces handling damage in busy production environments. Traceability and workflow fit for production Traceability is supported by the visible SKU and GTIN, enabling straightforward inventory management and documentation in inspection plans. The robust geometry and workshop specification make the pin suitable for end‑measurement, fixture setting and repetitive inspection cycles in small‑ to medium‑series production. Compatibility with standard fixture bores and positioning pins simplifies integration into existing quality workflows and aids rapid inspection throughput. For workshop‑grade inspection tools and reliable supply from Emmerich, contact Metav Werkzeuge to request the Metav IndustryLine gauge pin and to discuss delivery and stock availability. Technical data SKU: M323.F10 GTIN: 4061905068423 Material: Special steel Diameter: 15.1 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Data Diameter: 15.1 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Workshop version Supplied in transport box End‑measurement application Traceable via GTIN and SKU FAQ What tolerance can be expected from this test pin? The gauge pin M323.F10 is specified with a dimensional tolerance of ±0.002 mm, suitable for precise workshop inspection and repeatable fixture positioning. Which material is used for the pin? The M323.F10 is manufactured from special steel, offering wear resistance and dimensional stability for routine measurement tasks. Is the pin delivered protected for transport? Yes, the M323.F10 is supplied in a transport box to protect the pin during shipping and storage. What applications are suitable for this single gauge pin? The M323.F10 single gauge pin is intended for end‑measurement, fixture setting, go/no‑go checks and repetitive inspection cycles in workshop and quality‑control environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.21mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combine high dimensional accuracy and workshop-ready durability for reliable end‑dimension checks; the gauge pin delivers repeatable results thanks to a tolerance of ±0.002 mm and a compact 50 mm length. Order the test pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single Ø 15.21 mm, length 50 mm (Metav IndustryLine) Gauge pin, single Ø 15.21 mm, length 50 mm for precise end‑dimension inspection and routine go/no‑go checks in production and maintenance environments. Workshop version for robust daily use High dimensional accuracy ±0.002 mm Compact 50 mm length for easy handling Consistent results for end-dimension inspection The pin is manufactured to a nominal diameter of 15.21 mm with a stated displacement accuracy of ±0.002 mm, which supports reproducible end‑dimension checks in quality control and assembly processes. This level of precision minimises ambiguity in go/no‑go evaluations and reduces rework: a clear numerical tolerance replaces subjective judgement. The compact design and small mass also reduce the influence of operator handling on short measurement cycles. Built for workshop environments and routine use Produced in special steel, the component is specified as a workshop version, giving it robust mechanical resistance for frequent handling and use on the shop floor. The 50 mm overall length combines sufficient engagement for end‑face and bore checks with compact storage and straightforward insertion into fixtures. Where occasional cleaning and light corrosion protection are applied, the material specification supports long service intervals under normal workshop conditions. Traceability and stock handling made straightforward Logistics and inventory control are supported by clear identification: Article number M323.F21 and GTIN 4061905070310 enable traceable procurement and fast replenishment. The item weight (0.1 kg) and compact dimensions simplify kitting for inspection sets, while single‑item supply fits both bespoke measurement stations and replacement needs. These attributes streamline integration into existing quality workflows and stock systems. Practical use cases and handling recommendations The single pin is particularly suited to end‑dimension verification of small components, quick go/no‑go checks during assembly and as a reference for comparative inspection tasks. For reliable outcomes, ensure mating holes and fixtures are clean and that the pin is wiped and protected from corrosive agents after use. Routine visual inspection for wear, combined with periodic measured verification against calibrated standards, preserves measurement integrity over time. For repeatable end‑dimension control choose the Metav IndustryLine gauge pin M323.F21 and contact Metav Werkzeuge in Emmerich for supply and technical guidance (+49 2822 7131930, info@metav-werkzeuge.com). Technical Data Article number: M323.F21 GTIN: 4061905070310 Label: Test pin, single, Ø 15.21 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 15.21 mm Length: 50 mm Tolerance (displacement): ±0.002 mm Weight: 0.1 kg Nominal measuring range: 15.21 mm Special features Material: Special steel Workshop version (robust design) Supplied as a single pin Intended use: end‑dimension inspection / end masses FAQ What nominal diameter and tolerance does the pin have? The gauge pin M323.F21 has a nominal diameter of 15.21 mm and a displacement accuracy of ±0.002 mm. Which material is used and is the design suitable for the workshop? The test pin is made from special steel and is specified as a workshop version for robust daily use. How is the item identified for stock and traceability? Identification is via article number M323.F21 and GTIN 4061905070310 to support procurement and inventory systems. What typical applications are appropriate for this pin? Typical uses include end‑dimension checks, go/no‑go assessments and comparative inspection tasks on small components. How should the pin be cared for to maintain accuracy? Keep the pin clean, protect it from corrosive agents, and perform periodic verification against calibrated standards to maintain accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.22mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready construction, ±0.002 mm dimensional accuracy and a Ø 15.22 mm diameter for dependable reference measurements; order the single gauge pin via Metav Werkzeuge or contact our consultants for procurement and specification support. Gauge pin M323.F22, single gauge pin – Ø 15.22 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F22 is a workshop-grade reference pin for precision diameter checks and setup tasks in inspection, jigmaking and machine pre-setting. Ø 15.22 mm workshop reference pin 50 mm overall length Tolerance ±0.002 mm for fine checks Made from special steel, hardened finish Repeatable dimensional checks for process control A reference pin with ±0.002 mm tolerance provides stable, repeatable measurements that reduce rework and inspection uncertainty. The precise diameter control of Ø 15.22 mm makes this pin suitable as a master for gauging bores, verifying plug gauges and establishing go/no‑go checks in set-ups. Using a solid reference pin simplifies calibration routines and supports traceable QC documentation while avoiding interpretative measurement steps; measurable benefits include shorter inspection cycles and fewer stoppages on the shop floor. Robust workshop design built for everyday use This workshop variant is designed for frequent handling and insertion cycles: a 50 mm length offers enough engagement depth for stable seating without excess overhang, and the special steel construction with a hardened finish improves wear resistance and surface stability. The single-piece design minimises potential play and provides a consistent tactile feel during manual use. Such mechanical consistency protects mating parts from marking and delivers predictable contact behaviour when used with manual or pneumatic fixtures. Practical procurement and suitability notes The pin is supplied as an individual reference item, making it straightforward to integrate into existing toolsets or inspection kits. The listed accuracy class and compact dimensions make it appropriate for workshop-level inspection, jigs and fixtures where a robust, easy-to-handle master is required. Purchasing via the Metav IndustryLine gives access to a broad supply chain and documentation — useful when specifying replacements or maintaining a set of reference pins for production repeatability. For procurement and technical advice on the Metav IndustryLine gauge pin M323.F22, contact Metav Werkzeuge in Emmerich to request availability and delivery options. Technical data SKU: M323.F22 GTIN: 4061905070327 Article label: Prüfstift, einzeln, 15,22 mm Länge 50 mm eClass: 21170231 Facts Diameter: 15.22 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single gauge pin Image asset: m323a01-main.jpg FAQ What is the declared tolerance and how does it affect use? The declared tolerance of ±0.002 mm ensures the gauge pin serves as a precise reference for fine checks; the M323.F22 is therefore suitable where close‑tolerance verification is required. Can this pin be used in bore gauging and fixture set-up? Yes, the M323.F22 gauge pin is intended for bore checks and fixture set-up thanks to its Ø 15.22 mm diameter and 50 mm engagement length. What material is the pin made from and why does that matter? The pin is manufactured from special steel, which provides improved wear resistance and stable surface condition for repeated contact applications. Is the gauge pin supplied individually or in sets? This item is supplied as a single gauge pin; the single‑piece supply makes it easy to add to an inspection kit or replace an individual reference item. How does Metav IndustryLine support procurement and traceability? Metav IndustryLine provides clear identification (SKU M323.F22 and GTIN 4061905070327) and a predictable supply route, supporting consistent procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.23mm Test Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm tolerance, special steel construction and a compact 50 mm length for consistent end‑dimension checks; the workshop version is supplied ready for safe transport in a box. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test Pin, single, 15.23 mm diameter, 50 mm length – Workshop version by Metav IndustryLine The Test Pin, single, 15.23 mm diameter, 50 mm length is a compact reference gauge for precise end‑measurement and inspection tasks in workshop and production environments. Workshop version for daily use Diameter 15.23 mm, precision fit Accuracy ±0.002 mm Delivered in transport box Reduced rework through measurable precision The compact gauge pin offers an accuracy of ±0.002 mm, which translates into reproducible go/no‑go checks and minimised rework on batch parts. Manufactured from special steel, the pin keeps dimensional stability under regular handling and resists wear in serial inspection tasks. The combination of tight tolerance and a robust material reduces uncertainty in assembly gateways and in‑process inspections, enabling faster decisions on accept/reject without extensive secondary measurement. Durability and handling optimised for the workshop Designed as a workshop version, the pin benefits from a compact 50 mm length and a clearly defined 15.23 mm diameter that make it easy to position in fixtures and test benches. The slightly elevated mass yields steady placement during tactile measurement routines, while the solid material avoids quick deformation. Supplied in a transport box, the pin arrives protected and ready for storage or immediate use, simplifying logistics and reducing downtime between shifts. Simple integration into gauge sets and inspection workflows The format of this gauge pin allows straightforward inclusion in existing gauge sets and dimensional checks: the standard diameter and short length suit end‑dimension verification, fixture checks and comparative measurements with plug gauges or dial indicators. The clear numerical specification supports traceable documentation and fast procurement via the SKU and GTIN for controlled inventory management; repeatable use of the same reference reduces measurement scatter across operators. For ordering or technical clarification on the M323.F23 workshop test pin, contact Metav Werkzeuge to discuss application suitability or to request a quotation—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.F23 GTIN: 4061905070334 Category: Gauge pins Label: Test pin, single, 15.23 mm diameter, 50 mm length Besonderheit: Workshop version Facts Length: 50 mm Diameter: 15.23 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Delivered in transport box Intended use: end‑dimension checks Story trigger: end measurements FAQ What tolerance does the test pin offer? The test pin is specified with an accuracy of ±0.002 mm, providing high repeatability for end‑dimension inspections of small components. Which material is used for this gauge pin? This workshop version is made from special steel, chosen for dimensional stability and wear resistance during routine inspection cycles. How does the M323.F23 fit into existing inspection setups? The M323.F23 test pin, with its 15.23 mm diameter and 50 mm length, integrates easily into fixture checks, plug gauge comparisons and bench inspection routines where compact reference gauges are required. Is the product protected for transport and storage? Yes, the workshop test pin is supplied in a protective transport box to prevent damage in transit and to simplify storage between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.24mm Gauge Pin 50mm Length Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, tight ±0.002 mm accuracy and compact dimensions for reliable end‑measure checks; order the part directly via Metav Werkzeuge or consult the team for application advice. Gauge pin, single, 15.24 mm, 50 mm — Metav IndustryLine workshop version Gauge pin, single, 15.24 mm, 50 mm serves as a compact reference pin for end‑measure and gauge set applications in metalworking and toolrooms Workshop version for daily use Precision fit Ø 15.24 mm 50 mm length for gauge assemblies Special steel construction, robust Precision where repeatable measurement counts This compact gauge pin is manufactured for consistent end‑measure performance: a nominal diameter of 15.24 mm paired with a tight runout tolerance yields a verified displacement variation of ±0.002 mm, making it suitable for precision checking and alignment tasks. The 50 mm overall length provides a stable contact area without excess overhang, while the special steel construction gives the pin the stiffness required for repeatable results. At 0.1 kg the component is easy to handle during set‑up yet dense enough to resist minor deflection, translating technical specifications into reliable shop‑floor performance. Built for integration and everyday workshop use Delivered in a protective transport box, the unit is presented as a workshop‑grade item that slots directly into gauge sets, pin jigs or as an end‑measure reference in inspection routines. The workshop version specification emphasises durability under frequent handling and straightforward maintenance: the material choice and finish reduce surface wear and maintain a tight fit in bores and gauge sliders. The compact geometry simplifies exchange in modular fixtures and supports efficient calibration cycles, so the pin functions as a pragmatic element in continuous production control. Confidence from a specialist precision partner Sourcing this component from Metav IndustryLine connects practical measurement needs with a supplier network geared for industry: consistent stock, traceable article identification and straightforward logistics from Emmerich. The design focus prioritises measurable benefits—repeatability, compatibility and handling ease—so that engineering teams and quality technicians gain dependable reference hardware without unnecessary complexity. Trust in proven shop solutions for routine inspection tasks and clear technical data that support procurement and quality documentation. Contact Metav Werkzeuge for tailored gauge solutions or request the M323.F24 from Metav IndustryLine at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration into existing gauge sets Technical data Article number: M323.F24 GTIN: 4061905070341 Brand: Metav IndustryLine Facts Diameter: 15.24 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Delivered in transport box Category: Gauge pins (Messstifte) FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, providing a tight tolerance suitable for precise end‑measure checks and alignment work with the Metav IndustryLine M323.F24. Is the pin suitable for daily workshop handling? Yes; the workshop version and special steel construction make the M323.F24 robust enough for regular use in toolrooms and inspection benches. How is the pin delivered to ensure safe transport? The pin is supplied in a protective transport box, which secures the component during shipment and handling. Can this gauge pin be used in modular gauge sets and jigs? The compact 50 mm length and precise 15.24 mm diameter are intended for straightforward integration into gauge assemblies, jigs and fixture systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.25 mm Test Pin Single 50 mm Length Workshop Finish - Metav IndustryLine
Benefit from the combination of robust special steel construction, a compact 15.25 mm diameter and tight ±0.002 mm tolerance for reliable end‑measurements in everyday workshop tasks. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification support. Gauge pin, single 15.25 mm — workshop test pin, 50 mm length (Metav IndustryLine) Gauge pin, single 15.25 mm is a compact workshop test pin designed for end‑measurements, plug gauge checks and set‑up work in inspection and machine adjustment tasks Workshop version for everyday use Diameter 15.25 mm, length 50 mm Tolerance ±0.002 mm for precise control Supplied in a protective transport case Precision where it counts for repeatable checks The compact probe is manufactured from special steel and finished to a tight ±0.002 mm runout specification, making it suitable for high‑accuracy dimensional checks and go/no‑go verification. Its small footprint supports quick insertion into gauges or fixtures and the short, rigid shank reduces bending and measurement error, which translates into fewer rejects and less rework on production runs. The engineering focus is on stable, repeatable measurements rather than decorative finishes, so inspection decisions can be taken on a sound technical basis. Built for daily workshop use and robust handling This workshop model combines a 50 mm working length with a 15.25 mm diameter to cover common inspection tasks while remaining easy to handle. The construction prioritises wear resistance and dimensional stability under routine use, and the delivery in a protective transport case ensures secure storage and safe transport between workstations. The compact design facilitates fast changeovers at assembly or inspection benches and integrates cleanly with existing plug‑gauge sets, reducing system complexity and downtime. Practical applications that speed up set‑up and inspection Designed for end‑measurements and plug‑gauge applications, the probe is ideal for checking bores, locating features and validating gauge fixtures during machine set‑up. The combination of precise diameter and short, rigid shank simplifies tactile feel checks and optical verification alike, enabling technicians to confirm fits quickly and with confidence. Fewer measurement ambiguities lead to smoother production flow and better alignment between machining and quality control processes. Supply reliability and the Metav quality filter Sourced from Metav IndustryLine and distributed through Metav Werkzeuge, the product benefits from a European quality filter that supports reliable delivery to the shop floor. Metav’s broad range and consistent stock handling are backed by decades of trade experience and a large customer base, providing peace of mind for purchasing managers who require dependable supplies for continuous operation. The workshop design and protective case together make this probe a practical, low‑risk addition to inspection kits in small and medium‑sized enterprises. For precise workshop measurements, order this Metav IndustryLine gauge pin via Metav Werkzeuge or contact our technical advisors in Emmerich for tailored specification advice Technical Data Article number: M323.F25 GTIN: 4061905067761 SKU: M323.F25 Facts Diameter: 15.25 mm Length: 50 mm Tolerance / runout: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Delivery: protective transport case Category: gauge pin FAQ Is this probe suitable for plug‑gauge checks? Yes. The gauge pin from Metav IndustryLine is intended for plug‑gauge and end‑measurement tasks and offers the dimensional stability required for these applications. What level of accuracy can be expected in routine use? The test pin is finished to a runout tolerance of ±0.002 mm, which supports tight dimensional control in inspection and set‑up processes. Does the product include a transport case? A protective transport case is supplied, ensuring safe storage and simple handling between workstations. Can this pin be used in production fixture checks? Yes. The robust workshop design and compact dimensions make it suitable for fixture validation and repeatable in‑process checks. Who supplies and distributes this gauge pin? The product is offered by Metav IndustryLine and distributed via Metav Werkzeuge, ensuring European supply and distribution standards. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.26mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial‑grade precision, robust special steel construction and a compact 50 mm length for reliable end‑measure checks and fixture setting. Order direct via Metav Werkzeuge or request advice from our consultants for seamless integration into inspection routines. Test pin M323.F26 — Test pin, Ø 15.26 mm, length 50 mm (Metav IndustryLine) A Test pin, Ø 15.26 mm, length 50 mm designed for end‑measure checks, fixture verification and repeatable metrology tasks in workshop and production environments. Workshop version for daily use Diameter 15.26 mm for end‑measure checks Length 50 mm with robust special steel Dimensional accuracy ±0.002 mm Consistent, measurable accuracy for routine inspection The Test pin M323.F26 provides repeatable measurement capability with a documented accuracy of ±0.002 mm, which reduces uncertainty during go/no‑go checks and fixture verification. This level of control shortens inspection cycles and supports consistent quality decisions on the shop floor. The tight tolerance is especially valuable when used as a reference in setting fixtures or when verifying mating geometries, where even small deviations may cause downstream rework. Durable construction and practical workshop design Manufactured from special steel, the probe combines wear resistance with a compact 50 mm shank that is easy to handle and mount. The workshop version specification ensures the component withstands routine use without frequent replacement, helping to keep downtime to a minimum. The nominal diameter of 15.26 mm is suitable for end‑measure applications and matches common fixture bores, allowing straightforward insertion and stable contact during measurement tasks. Integrates with existing gauges and fixture routines Designed as an individual test pin supplied for immediate use, this probe simplifies the setup of checking fixtures and end‑of‑line verifications. The robust geometry supports stable contact points for both static and manual inspection methods, improving repeatability across multiple operators. When incorporated into a calibrated inspection sequence, the pin contributes to traceable, comparable results and smoother process control in production and maintenance workflows. Choose Metav IndustryLine's M323.F26 for reliable end‑measure checks — contact Metav Werkzeuge GmbH in Emmerich for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.F26 GTIN: 4061905067778 Material: Special steel Diameter: 15.26 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Numbers / Core technical data Diameter 15.26 mm Length 50 mm Accuracy ±0.002 mm Weight 0.1 kg Special features / Versions Workshop execution Supplied individually Category: Test pins FAQ What tolerance can be expected from this test pin? The test pin M323.F26 is specified with a tolerance of ±0.002 mm, permitting high repeatability for end‑measure checks and fixture verification. Which material is the pin made from and why does it matter? The pin is manufactured from special steel, which provides wear resistance and stability under routine workshop use, ensuring longer service life and consistent contact surfaces. Is the pin suitable for use in fixture set‑up and gauge checks? Yes, the pin’s 15.26 mm diameter and 50 mm length are intended for end‑measure applications and align with common fixture bores for straightforward integration. How is the item supplied for use in a production environment? The component is supplied individually, ready to be used in inspection routines or installed in checking fixtures without additional preparation. Can this test pin be used for manual and semi‑automated inspections? The robust geometry of the pin supports both manual and semi‑automated inspection methods, helping to improve measurement repeatability across operators and equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.27mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability, robust workshop design and a tight tolerance of ±0.002 mm for reliable end‑measurement and fit checks; order directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single — Ø 15.27 mm, 50 mm length (Metav IndustryLine) The Gauge pin, single — Ø 15.27 mm, 50 mm length is a workshop‑grade measuring pin for precise fit and end‑size verification in production and inspection tasks. Workshop-grade construction Diameter 15.27 mm for precision fits Tight tolerance ±0.002 mm Single-piece supply, 50 mm length Engineered accuracy for repeatable measurements The pin delivers repeatable results by combining a defined diameter of 15.27 mm with a manufacturing tolerance of ±0.002 mm, making it suitable for quality control and go/no‑go checks where small deviations matter. As a hard, dimensionally stable measuring element, the pin supports consistent bore checks and plug‑gauge comparisons; the close tolerance reduces rework and supports traceable inspection routines. The clear numeric specification enables planners to calculate fit clearances and process capability without guesswork. Durable workshop design that endures daily use Built as a workshop version from special steel, the pin resists wear under frequent handling and insertion into mating parts. The 50 mm length gives enough engagement for secure positioning while remaining easy to manipulate on the bench. The material choice provides a balance between surface hardness and corrosion resistance suitable for routine shop environments, so the measuring pin sustains dimensional integrity over many cycles and reduces the need for frequent replacement. Easy handling and practical shop integration Supplied as a single measuring element, the pin integrates simply into inspection benches, fixture setups and assembly testing. Its compact form factor simplifies storage and reduces setup time during batch checks; the defined diameter and tight tolerance support automated and manual verification steps alike. For best results, combine with calibrated gauges or comparator equipment to document conformity within inspection reports and to maintain quality records across production runs. For consistent workshop measurement results, request the Metav IndustryLine gauge pin from Metav Werkzeuge GmbH — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering information Technical data Article number: M323.F27 GTIN: 4061905067785 Manufacturer: Metav IndustryLine Material: Special steel Diameter: 15.27 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Numbers / Core data Diameter: 15.27 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop‑grade execution Single piece supply Category: Messstifte Story trigger: end size checks FAQ What is the intended use of this gauge pin? The gauge pin is intended for end‑size verification and fit checks; the 15.27 mm diameter and ±0.002 mm tolerance make the pin suitable for precision inspection tasks. Which materials is the gauge pin suitable for measuring against? As a measuring element, the pin itself is made from special steel and is used to check holes and components made from a broad range of workshop materials during assembly and inspection. How should the pin be stored to maintain accuracy? Store the pin dry and protected from mechanical damage; keep it separate from abrasive items to preserve the specified diameter and the ±0.002 mm tolerance. Is the measuring pin delivered as a single item or in sets? This product is supplied as a single measuring pin in the stated diameter and length, intended for individual use or for grouping with other pins as required. Can the pin be used for go/no‑go testing in production? Yes, the pin’s defined diameter of 15.27 mm and its tight tolerance enable its use as a reference element in go/no‑go and assembly checks Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.28mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, tight tolerance and a compact 50 mm length for straightforward end‑measurement checks; order the part directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.F28 – 15.28 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F28 serves as a compact inspection pin for end‑measurement checks and fixture set‑up in workshop environments Workshop-grade design Diameter 15.28 mm precision Length 50 mm for fixture checks Tolerance ±0.002 mm Precise end‑measurement for reliable setup The M323.F28 is engineered for consistent end‑measurement in metalworking and assembly processes. With a nominal diameter of 15.28 mm and a stated tolerance of ±0.002 mm, this inspection pin provides a reproducible reference geometry for verifying hole sizes, checking fixture positioning and confirming mating fits. The compact 50 mm shaft makes it simple to insert and remove in tight jigs while still offering the stiffness required for repeatable results. Using a defined reference element reduces set‑up time and minimises downstream rejects by ensuring the same physical datum is used throughout a process run. Durable material and workshop suitability Manufactured from special steel, the element resists wear and maintains its gauge over repeated use, which lowers life‑cycle costs compared with untreated components. The workshop‑grade execution balances surface finish and hardness for longevity without requiring delicate handling typical of laboratory artefacts. For applications where quick visual or tactile verification is needed on the shop floor, the robust construction enables frequent use in production routines while preserving dimensional integrity. Integration into quality workflows As a single inspection pin, this component is ideal for inclusion in gauge sets, production fixtures or portable inspection kits. Traceability is straightforward thanks to the SKU and GTIN identifiers, facilitating inventory control and replacement planning. The compact format aids portability between workstations and supports lean quality control practices: one defined reference reduces ambiguity when multiple operators perform the same check. Trust in the result is bolstered by Metav’s position as a precision partner, offering a broad range of calibrated and workshop‑ready measuring elements for industrial users Contact Metav Werkzeuge in Emmerich for application guidance and to secure the Metav IndustryLine gauge pin M323.F28 for immediate integration into production workflows Technical data Article number: M323.F28 GTIN: 4061905067792 Category: Messstifte Facts Diameter: 15.28 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & special features Material: Special steel Workshop execution (robust design) Single inspection/gauge pin Intended for end‑measurement checks FAQ What accuracy can be expected from this inspection pin? The M323.F28 is specified with a tolerance of ±0.002 mm, making it suitable as a high‑precision reference for jig and fixture checks. For which applications is this gauge pin most suitable? This inspection pin is designed for end‑measurement checks, fixture set‑up and quick verification tasks in metalworking and assembly environments. Is the material suitable for frequent shop‑floor use? Yes, the M323.F28 is made from special steel and built in a workshop‑grade execution to withstand repeated handling and maintain dimensional stability. How can the part be identified for reordering? Order using SKU M323.F28 or GTIN 4061905067792 to ensure the identical gauge pin is supplied. What maintenance is recommended to preserve accuracy? Regular cleaning to remove debris and light corrosion protection are recommended to maintain the gauge's surface condition and dimensional reliability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com