Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
15.53mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise, repeatable dimensional checks with a compact inspection pin that combines workshop-grade robustness and tight manufacturing tolerance. The 15.53 mm diameter, 50 mm length gauge pin delivers ±0.002 mm repeatability in a special steel body; order directly via Metav Werkzeuge or contact our advisers for specification matching. M323.F53 gauge pin — precision inspection pin, 15.53 mm Ø, 50 mm length (Metav IndustryLine) The M323.F53 gauge pin is a single-piece inspection pin designed for reliable end-dimension verification in workshop measuring routines and quality control stations. Workshop-grade construction Diameter 15.53 mm precision Tolerance ±0.002 mm manufacturing Length 50 mm shank Dependable dimensional control for repetitive checks This inspection pin is manufactured to a tight ±0.002 mm tolerance, which provides a reliable reference for go/no-go checks and comparative measurements in routine inspection tasks. Made from special steel, the pin maintains its geometry under standard workshop use, reducing drift between checks and helping to ensure consistent results on repeated insertions. The compact format and single-piece supply suit fixture probing, bench inspection and auxiliary gauging where a defined reference diameter is required. Practical benefits for workshop and metrology use The robust workshop specification balances handling resilience with dimensional stability: the 50 mm length and 15.53 mm diameter make the gauge easy to seat in jigs or bores, while the modest mass supports safe, controlled manipulation on the bench. Traceable identification such as the product SKU is provided for inventory and document control. The construction supports efficient inspection workflows by reducing the need for frequent rework of simple reference tasks and by integrating smoothly into existing gauging routines. Integration into quality processes and procurement As a single-piece reference pin, this component serves as a quick-verification tool for batch checks, assembly control and end-dimension audits. The straightforward geometry simplifies fixture design and minimises operator training for repetitive dimensions. Choosing a Metav IndustryLine product supports dependable stock supply from Emmerich and aligns with the wider offer of precision tools that streamline procurement and reduce supplier complexity for workshops and small production lines. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M323.F53 gauge pin into inspection routines and to arrange delivery from Emmerich. Technical data SKU: M323.F53 GTIN: 4061905071546 Material: Special steel Diameter: 15.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Manufacturer: Metav IndustryLine eClass: 21170231 Facts Diameter: 15.53 mm Length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg Special features Single-piece supply Workshop edition Application: end-dimension inspection FAQ What is the intended use of this gauge pin? The M323.F53 gauge pin from Metav IndustryLine is intended as a precision reference for end-dimension verification, comparative checks and fixture probing in workshop and small-scale production environments. What tolerance and dimensions does the pin have? This inspection pin has a diameter of 15.53 mm, a length of 50 mm and a manufacturing tolerance of ±0.002 mm, making it suitable for tight go/no-go and reference measurements. Which material is used for the pin and how does it affect performance? The pin is made from special steel; this material provides stable geometry and wear resistance appropriate for repeated bench and fixture use as intended for workshop applications. How is the product identified for stock and documentation? The item is listed under SKU M323.F53 and GTIN 4061905071546, facilitating inventory control and procurement documentation for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.54mm Test Pin, Single, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of high repeatability and compact handling for efficient in-process checks; the combination of a 15.54 mm nominal diameter with ±0.002 mm tolerance and robust special steel construction supports reliable production control. Order the item directly via Metav Werkzeuge or ask the consultants for specification matching and batch supply. Gauge pin, single, 15.54 mm, length 50 mm – precision inspection pin for workshop metrology (Metav IndustryLine) A Gauge pin, single, 15.54 mm, length 50 mm designed for dimensional verification of bores and end dimensions in routine workshop inspection and jig set‑up. Workshop version for rugged use Diameter 15.54 mm exact fit Length 50 mm for compact checks Tolerance ±0.002 mm high precision Reliable precision for everyday inspection The pin delivers reproducible measurements thanks to its tight tolerance of ±0.002 mm, making it suitable for quality control tasks where small deviations can mean costly rework. As a hardened gauge pin, it provides a defined contact surface for go/no‑go checks, bore gauging and comparative inspection. The precise diameter and controlled manufacturing reduce measurement uncertainty and streamline pass/fail decisions, which supports faster throughput in production and inspection loops. Built for workshop durability and easy handling Manufactured from special steel, this workshop variant tolerates regular handling and fits toolboxes and inspection benches with ease. The 50 mm overall length and compact mass (approx. 0.1 kg) make the pin simple to position in tight assemblies and quick to swap between fixtures. The solid construction and workshop finish reduce the risk of surface damage during routine use, so downtime caused by damaged gauges is minimised and handling remains straightforward even in busy shop environments. Practical use cases and process benefits Ideal for spot checking bores, verifying end dimensions and supporting jig alignment, the pin integrates into both manual and semi‑automated inspection routines. The clear nominal size (15.54 mm) and the documented manufacturing tolerance allow planners to include the pin in inspection plans and work instructions, improving traceability. For purchasers seeking consistent supply and clear identification, the included SKU and GTIN enable efficient stock control and reorder processes across stores and workshops. Contact Metav Werkzeuge in Emmerich to confirm availability of the Metav IndustryLine gauge pin M323.F54 and to discuss batch orders or alternative diameters — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: M323.F54 GTIN: 4061905071553 Manufacturer: Metav IndustryLine Facts Diameter: 15.54 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single gauge pin Label: Prüfstift, einzeln, 15,54 mm Länge 50 mm FAQ What is the declared diameter and tolerance of the gauge pin? The gauge pin M323.F54 has a declared diameter of 15.54 mm with a tolerance of ±0.002 mm for dimensional inspection tasks. Is this pin suitable for regular workshop use? Yes. The Metav IndustryLine workshop execution and the special steel construction make the pin suitable for frequent handling and routine shop inspections. What are the physical dimensions of the pin? The pin measures 15.54 mm in diameter and 50 mm in length; the item weight is listed as approximately 0.1 kg. Can the pin be used for bore gauging and end‑dimension checks? The design and tolerance class of the gauge pin support bore gauging and end‑dimension verification as part of standard inspection procedures. Does the product listing include a calibration certificate? The product data does not state that a calibration certificate is included; if a certificate is required, please verify the delivery scope before ordering. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.55mm Gauge Pin, Workshop Version, 50mm Length, Special Steel ±0.002mm - Metav IndustryLine
Take advantage of the combination of ±0.002 mm measuring accuracy, 15.55 mm nominal diameter and robust special steel construction for reliable end‑dimension checks; order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin, single, 15.55 mm diameter, 50 mm length — Metav IndustryLine, workshop-grade measuring pin with ±0.002 mm accuracy The Test pin, single, 15.55 mm diameter, 50 mm length is a workshop‑grade measuring pin designed for precise end‑dimension checks and gauge assemblies in production and inspection environments Workshop‑grade construction Diameter exactly 15.55 mm for gauge fit Length 50 mm for fixture compatibility Accuracy ±0.002 mm repeatability Accuracy that keeps production within tolerance The measuring probe delivers a consistent ±0.002 mm tolerance, which noticeably reduces the need for rework and supports reliable quality control. With a nominal diameter of 15.55 mm, the probe is intended for end‑dimension verification where small deviations have direct cost implications. The tight tolerance and repeatable geometry mean fewer sample checks and faster decision‑making on the shop floor, improving throughput without compromising measurement integrity. This rational benefit is backed by the pin’s clear numeric specification and suitability for precision gauges. Durable workshop construction for everyday use Built in a workshop‑grade design and manufactured from special steel, the probe withstands the handling typical in production and maintenance routines. The 50 mm shank length provides comfortable engagement in fixtures and allows stable seating in gauge blocks and holders. This mechanical robustness ensures that the measuring pin keeps its geometry under normal workshop stresses, so the measurement chain remains trustworthy day after day. The straightforward construction also simplifies inventory management: a single, dependable probe replaces less precise items and supports consistent results. Easy integration into gauges and inspection workflows The component is delivered as a single measuring pin suitable for end‑of‑line checks, plug gauges and bespoke fixtures; traceability is supported by SKU and GTIN identifiers for procurement and stock control. Its precise diameter and repeatable form make it compatible with standard gauge housings and inspection jigs, enabling quick replacement and minimal downtime. For operations that require documented traceability, the clear product designation and manufacturer data simplify record keeping and ordering, facilitating a smooth link between inspection findings and corrective actions. Contact Metav Werkzeuge for tailored advice on specifying the Metav IndustryLine test pin M323.F55 for gauge and inspection applications, and receive support from our Emmerich‑based team Technical data SKU: M323.F55 GTIN: 4061905067235 Manufacturer: Metav IndustryLine Facts Diameter: 15.55 mm Length: 50 mm Accuracy (specified): ±0.002 mm Weight: 0.1 kg Material: Special steel Special features Workshop version Supplied as single test pin Intended for end‑dimension checks and gauge use FAQ What is the nominal diameter of the pin? The pin has a nominal diameter of 15.55 mm, specified for precise gauge fitting and end‑dimension verification. What tolerance can be expected from this test pin? The test pin is specified with an accuracy of ±0.002 mm, suitable for close‑tolerance inspection tasks in workshop environments. Is the pin suitable for use in gauge fixtures? Yes, the measuring pin is designed for integration into standard gauge housings and inspection jigs and is supplied as a single workshop‑grade probe (SKU M323.F55). What material is used in the pin? The pin is made from special steel, chosen for mechanical stability and wear resistance under normal workshop handling. How can this component support production quality control? The combination of precise diameter, repeatability and ±0.002 mm specification helps reduce sampling frequency and rework, supporting faster, more reliable quality decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.56mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high measuring reliability, compact form factor and workshop-ready durability for repeatable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge pin, single, 15.56 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single, 15.56 mm diameter, 50 mm length is a precision cylindrical pin engineered for end‑dimension verification and fixture reference in workshop and inspection environments. Workshop-grade construction Diameter 15.56 mm, length 50 mm Special steel for wear resistance Tolerance ±0.002 mm for fine checks Stable readings for consistent quality control The gauge pin delivers repeatable measurements thanks to its tight manufacturing tolerance of ±0.002 mm, which reduces ambiguity in pass/fail decisions during inspection. For routine end‑dimension checks and fixture references, the pinned diameter of 15.56 mm provides a defined datum that can be relied upon when setting up go/no‑go verifications or calibrating simple jigs. The short, compact length of 50 mm keeps the instrument easy to handle while preserving stiffness, limiting deflection and maintaining measurement integrity under normal workshop handling. Robust build tailored for workshop use Manufactured from special steel, this workshop version is designed for extended service in production environments where surface contact and repeated use are normal. The material choice supports resistance to wear and preserves the gauge geometry over time, helping to avoid gradual drift in size. The single‑piece design simplifies storage and reduces the number of interfaces that can introduce error. Supplied as an individual instrument, the pin integrates well into inspection sets and is suitable for routine control tasks where a durable, straightforward reference element is required. Practical application and inspection advantages This cylindrical reference element is ideal for end‑measure checks, plug gauges in fixture alignment and quick verification tasks on the shop floor. The compact design supports quick handling during machine setup or batch inspection, accelerating routine processes without sacrificing precision. Traceability and ease of identification are supported by the clear SKU and labelling, which facilitates stock keeping and reordering for maintenance of measurement routines. For bespoke inspection plans or fixture integration, technical advice is available from the supplier to ensure the pin meets the required inspection workflow. For workshop‑grade accuracy and dependable integration, request the Metav IndustryLine gauge pin (M323.F56) through Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and procurement guidance. Technical data Article number: M323.F56 GTIN: 4061905067242 Manufacturer: Metav IndustryLine Weight: 0.1 kg Numerical data Diameter: 15.56 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials and features Material: special steel Workshop version Delivered in a protective case Single gauge pin FAQ What measurement tolerance does the gauge pin have? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing fine verification capacity for end‑dimension checks. Which material is used for this gauge pin? This Metav IndustryLine gauge pin is made from special steel chosen for wear resistance and stable geometry. Is the product supplied individually or as a set? The item is supplied as a single gauge pin (SKU M323.F56) suitable for use as a stand‑alone reference or combined into inspection kits. Can this pin be used directly in fixture alignment? Yes, the cylindrical geometry and precise diameter of 15.56 mm make it suitable for fixture reference and quick alignment tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.57mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.002 mm repeatability, special steel construction and a compact 50 mm working length for reliable end‑measure verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch and tolerance options. Gauge pin, single, Ø 15.57 mm, length 50 mm — Workshop version by Metav IndustryLine The Gauge pin, single, Ø 15.57 mm, length 50 mm is a workshop‑grade test pin designed for precise end‑measure checks and alignment tasks in inspection and fixture work. Workshop‑grade finish Diameter 15.57 mm, length 50 mm Accuracy ±0.002 mm Delivered in a protective case Consistent dimensional control for production checks The compact test pin delivers consistently reproducible results thanks to its ±0.002 mm tolerance, which suits fine inspection work where small deviations matter. Manufactured from special steel, the component maintains form stability under regular handling and provides a reliable reference for go/no‑go and end‑measure verifications. Using a dedicated gauge pin reduces the need for iterative rework and shortens inspection cycles, helping to keep quality checks efficient and predictable. Robust workshop design for everyday use Built as a workshop‑version test pin with a 50 mm shank, the measuring pin balances rigidity and manageability during handling. The special steel construction offers resistance to wear and maintains the reference diameter over repeated insertions. Supplied in a protective case for secure transport, the pin is suited to busy inspection benches and mobile testing kits. The compact dimensions allow easy storage and quick access while preserving accuracy across shifts. Practical integration into inspection and jig setups The pin is intended for end‑mass and alignment purposes in fixtures and gauges, serving as a precise plug for bore or port checks. Its single‑pin form factor makes it straightforward to include in measured assemblies or as a reference element in comparative checks. Traceability is supported by the supplied article data; the SKU and GTIN are available in the technical details for procurement and inventory integration. The pin functions as a simple, low‑overhead tool that complements more complex metrology equipment and reduces setup time in routine inspection tasks. Secure consistent end‑measure control with this workshop‑grade gauge pin — contact Metav Werkzeuge (SKU M323.F57) for procurement or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F57 GTIN: 4061905067259 Product label: Gauge pin, single, Ø 15.57 mm, length 50 mm Facts Diameter: 15.57 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop version (werkstatt‑ausführung) Delivered in protective case Use case: end‑measure checks / alignment FAQ What diameter and length does this gauge pin have? The gauge pin is specified as Ø 15.57 mm with a working length of 50 mm (SKU M323.F57) and is intended for end‑measure and alignment checks. What level of accuracy can be expected from this test pin? The test pin offers an accuracy of ±0.002 mm, making it suitable for precise inspection tasks and repeatable reference checks. What material is used for the pin and how durable is it? Constructed from special steel, the pin is designed for workshop use and offers good resistance to wear and deformation under normal inspection conditions. Is the pin supplied ready for transport and storage? Yes — the item is delivered in a protective case to keep the pin secure during transport and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.58mm Gauge Pin, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of shop-floor robustness, 15.58 mm nominal diameter and a tight ±0.002 mm tolerance for reliable go/no-go checks; order the gauge pin directly via Metav Werkzeuge or consult the technical team for application advice. Gauge pin, single — 15.58 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single 15.58 mm, 50 mm is a workshop-grade check pin for quick bore verification and end-measure checks in production and inspection tasks. Workshop-grade construction Diameter 15.58 mm nominal Tolerance ±0.002 mm Length 50 mm for end-measure checks Rapid dimensional checks for routine inspection A compact tool for repetitive verification, this gauge pin delivers precision where speed and repeatability matter. The nominal 15.58 mm diameter and slim 50 mm length make it suited to rapid verification of bores and fits in assembly or inspection stages, reducing downtime by avoiding prolonged set-up. The workshop-grade design balances durability with straightforward handling, so routine go/no-go assessments can be completed with minimal auxiliary equipment. Engineered for repeatable accuracy Manufactured from special steel and finished to a ±0.002 mm tolerance, the pin provides a measurable improvement in confidence compared with generic checks. The quoted tolerance denotes close dimensional control during production; in practice this means fewer false calls and tighter control over assembly fit. For quality departments requiring compact, repeatable tools, this pin provides a robust reference for wear monitoring and first-off inspections. Practical form and handling benefits on the shop floor At 50 mm length and a mass around 0.1 kg, the tool is easy to store and handle while remaining stiff enough for reliable brief measurements. The single-pin format is intended for direct insertion checks or as part of a set of gauges for sequential testing of mating parts. Marking and SKU allow clear inventory management: M323.F58 ensures traceability and rapid identification during audits or batch checks. Choose the Metav IndustryLine gauge pin M323.F58 for dependable end-measure and bore checks — contact Metav Werkzeuge for procurement or technical clarification at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.F58 GTIN: 4061905067266 Manufacturer: Metav IndustryLine Facts Diameter: 15.58 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single gauge pin Intended for end-measure and bore verification FAQ What applications suit this gauge pin best? The gauge pin is designed for quick bore verification and end-measure checks in workshop and production environments; the 15.58 mm diameter and 50 mm length suit small to medium component inspection. Is the accuracy suitable for process control? With a declared tolerance of ±0.002 mm, the pin offers a level of precision appropriate for tight-fit inspections and routine quality checks in mechanical production. Which material is used for the pin and why does it matter? The pin is made from special steel; this material provides the stiffness and wear resistance needed for repeatable contact checks and robust shop-floor use. How is the product identified for inventory and traceability? Identification is provided via SKU M323.F58 and GTIN 4061905067266 for straightforward tracking in procurement and quality records. Can the pin be used as a reference for serial inspection? Yes, the pin serves as a compact reference tool for serial inspection and first-off checks, helping to detect drift or wear over production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.59mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade verification tool that combines 15.59 mm nominal diameter, 50 mm length and a tight ±0.002 mm tolerance for reliable end-measure checks; order the gauge pin directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin, single, 15.59 mm — workshop-grade, ±0.002 mm, Metav IndustryLine The gauge pin, single, 15.59 mm is a workshop-ready verification mandrel for precise bore, fit and end-measure checks in production and inspection environments Workshop-grade design Diameter 15.59 mm precision Length 50 mm for compact checks Tolerance ±0.002 mm repeatable Precision where it matters A tightly specified verification pin ensures repeatable acceptance testing and process control. The M323.F59 gauge pin delivers a nominal diameter of 15.59 mm with a permitted deviation of ±0.002 mm, making it suitable for short-run inspection tasks and quality gates where dimensional certainty is required. Constructed from special steel, the pin retains geometry under normal workshop handling and provides a stable reference for go/no-go checks and fixture alignment. The pronounced tolerance figure indicates industrial-grade repeatability that supports faster decision-making on the shop floor. Built for usability in routine inspection Compact dimensions and considered mechanical design reduce handling time and make this item easy to integrate into existing workflows. With a 50 mm effective length and a mass of approximately 0.1 kg, the pin is convenient for handheld checks and bench jigs alike. The workshop-grade execution balances stiffness and manageability so that users achieve consistent contact without excessive bulk. Where quick comparative checks, benching or fixture set-up are frequent, this format lowers cycle time while maintaining measurement integrity. Practical integration into measurement processes The pin serves multiple practical roles in production control: quick bore verification, reference for gauge blocks or plug gauges, and as a locating element in assembly fixturing. Its compact form suits tight spaces and short axial runs; the robust material choice supports repeated insertion and light contact without premature wear. When used alongside calibrated instruments, the component contributes to traceable inspection steps and helps maintain a documented quality regime across repetitive tasks, supporting a cost-effective balance between speed and precision. For tailored inspection solutions or to purchase the M323.F59 gauge pin from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for detailed technical advice and reliable European supply. Technical Data SKU: M323.F59 GTIN: 4061905068201 Brand: Metav IndustryLine Facts Diameter: 15.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop design Single gauge pin for end measurements Suitable for bore and fit checks FAQ What tolerance does the gauge pin provide? The gauge pin offers a tolerance of ±0.002 mm, ensuring high repeatability for end-measure inspections with the M323.F59 from Metav IndustryLine. Which material is used for the pin? The pin is made from special steel, chosen for dimensional stability and wear resistance in typical workshop applications. What is the effective length for checks? The effective length is 50 mm, which is suited to compact checks, fixture set-up and confined bore verification. Can this pin be used for assembly fixturing and locating? Yes, the rigid format and nominal diameter make the pin suitable as a locating element in jigs and short-run fixture assemblies. Is the item suitable for quick go/no-go checks on the shop floor? Designed as a workshop-grade verification tool, the gauge pin is appropriate for rapid go/no-go and fit checks that require a reliable reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of ±0.002 mm tolerance and a stable 50 mm gauging length to secure reproducible hole checks and precise end measurements; order the pin gauge directly via Metav Werkzeuge or ask our consultants for application advice. Pin gauge M323.F50 — single plug gauge, Ø 15.50 mm, 50 mm length (Metav IndustryLine) A Pin gauge M323.F50 designed for workshop and inspection use, suitable for fast verification of bore diameters and end‑measurement tasks in metalworking environments Precision tolerance ±0.002 mm Diameter 15.50 mm nominal 50 mm hardened length for stability Workshop-grade special steel construction High precision for reproducible dimensional checks The M323.F50 delivers industrial-class accuracy with a specified deviation of ±0.002 mm, a level of precision that supports consistent mating and assembly in production and quality control. Such a close tolerance minimises rework by ensuring that measured bores meet design intent, which translates directly into fewer rejects and less downtime. The nominal 15.50 mm diameter is presented as a stable reference, simplifying go/no‑go comparisons and reducing interpretation time during batch inspections. Robust construction for everyday shop use Manufactured in special steel and labelled as a workshop version, this gauge is engineered for repeated handling and routine checks on the shop floor. The material selection emphasises wear resistance and dimensional stability under normal workshop conditions, so calibration intervals remain predictable. The compact mass and balanced dimensions support quick placement in fixtures and gauges without excessive operator fatigue, which is important when multiple checks are required across a production shift. Practical length and handling improve measurement reliability A 50 mm overall length provides sufficient contact area to reduce bending during insertion while keeping the gauge easy to manipulate by hand or with simple fixtures. The longer contact surface helps to average out minor surface irregularities, yielding more reliable end‑position readings for both through‑holes and blind bores. Where traceable reference points are needed in testing routines, this single plug gauge serves as a repeatable standard for process control and first‑article inspection. For dependable workshop gauging rely on the Metav IndustryLine M323.F50 — order through Metav Werkzeuge or contact our advisors at Metav Werkzeuge for tailored measurement recommendations and integration support Technical data Article number: M323.F50 GTIN: 4061905070846 Brand: Metav IndustryLine Diameter: 15.50 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Material: special steel Designation: workshop version Classification: eClass 21170231 SKU: M323.F50 FAQ What level of accuracy does this pin gauge provide? The M323.F50 offers an accuracy of ±0.002 mm, making it suitable for fine inspection tasks and precision assembly checks. For which tasks is the gauge intended? The plug gauge is intended for bore verification and end‑measurement in workshop and inspection settings, supporting quick go/no‑go assessments and dimensional control. What is the nominal diameter and length of the gauge? The nominal diameter is 15.50 mm with an overall length of 50 mm, optimised for stability during insertion and measurement. Is the M323.F50 suitable for repeated shop‑floor use? Yes, the workshop-grade construction in special steel is designed for routine checks and regular handling typical of production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5–25 mm Radius Gauge Set, Concave and Convex Blades, 15 Pieces - Metav IndustryLine
Take advantage of a compact 15-piece set that covers radii from 15.5–25.0 mm, offering quick visual and tactile comparison for small-workpiece inspection. The combination of concave and convex profiles with robust carbon steel construction ensures repeatable checks and long service life — order the set directly via Metav Werkzeuge or ask our consultants if needed. Radius gauges M318.007 — 15-piece set with concave and convex forms, 15.5–25.0 mm range (Metav IndustryLine) The Radius gauges M318.007 are a compact set of matching concave and convex gauges designed for quick radius verification in fine mechanical and workshop environments. Radius gauges 15.5–25.0 mm range Concave and convex forms included 15-piece matched set for fast checks Made from standard carbon steel Precise checks for small radii improve process reliability This compact set addresses the need for rapid verification of small radii in precision work. Covering 15.5–25.0 mm, the gauges sit within a micro range where handling and stiffness are critical; their measured increments allow operators to identify mismatches without time‑consuming setups. The matched set simplifies go/no‑go assessment and reduces measurement uncertainty by providing a physical reference that complements caliper or profile measurements. The result is fewer reworks and a smoother inspection workflow. Robust construction and clear profile geometry for repeatable results Manufactured from standard steel (carbon steel) and finished to a factory standard (Werksnorm), the set combines durability with defined profile edges. The inclusion of both concave and convex profiles allows direct mating against internal and external contours, enabling immediate visual confirmation of radius conformity. The sturdy material ensures that edge deformation during routine use is minimised, so the set remains a reliable reference tool across multiple shifts and job cycles. Practical advantages on the shop floor and in quality control Delivered as a cohesive 15-piece set, the gauges streamline daily checks and reduce the need for temporary workarounds. Each gauge is shaped for quick placement and interpretation, which speeds up setup for sample inspections and first-article checks. For workshops and small series production, this means less downtime and faster decision-making at the machine. If additional documentation or technical clarification is required for integration into existing inspection plans, Metav Werkzeuge can provide further specifications and guidance. Contact Metav Werkzeuge for a tailored recommendation and to arrange supply from our Emmerich stock — Metav Werkzeuge GmbH can advise on compatibility with existing inspection procedures and delivery options Technical data SKU: M318.007 GTIN: 4054469127620 Article description: Radius gauges set 15.5–25.0 mm, 15 pieces Facts Measuring range: 15.5–25.0 mm Sizes included: 15.5, 16.0, 16.5, 17.0, 17.5, 18.0, 18.5, 19.0, 19.5, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0 mm Pieces: 15 Special features Concave and convex gauges Material: standard steel (carbon steel) Factory standard: Werksnorm Tariff number: 90173000 ECLASS: 21170203 FAQ What sizes are contained in the set? The set contains gauges from 15.5 mm to 25.0 mm, listed individually as 15.5, 16.0, 16.5, 17.0, 17.5, 18.0, 18.5, 19.0, 19.5, 20.0, 21.0, 22.0, 23.0, 24.0 and 25.0 mm for incremental radius checks. Are both internal and external radii covered? Yes — the set includes concave and convex profiles to check internal and external radii directly against workpiece contours. What material are the gauges made from? The gauges are made from standard steel (carbon steel) and finished to the manufacturer’s factory standard (Werksnorm). Is the set delivered as a matched collection? The item is supplied as a 15-piece set for concise and organised handling during inspection tasks. Is this product suitable for fine mechanical or watchmaking work? With its compact measuring range and fine increments, the set is appropriate for precision tasks in small-part inspection and fine mechanical applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.61mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
The combination of high repeatability (±0.002 mm), special steel construction and a compact 50 mm length ensures reliable end‑measure checks and consistent plug fits. Order the gauge pin directly via Metav Werkzeuge or ask the consultants if clarification is required. Gauge pin M323.F61 — single test pin, Ø 15.61 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.F61 designed for precise end‑measure verification and reference fits in inspection and assembly workflows Workshop version for robust use Accuracy ±0.002 mm for repeatable checks Special steel construction for wear resistance Protective transport case included Precision engineered for end‑measure checks The test pin is manufactured to an exact nominal diameter of 15.61 mm, with a specified accuracy of ±0.002 mm, delivering the dimensional certainty required in quality control and fit verification. Its compact geometry and tight tolerance reduce measurement variation when used as a reference or during assembly trials. Made from special steel, the pin resists deformation under normal handling and provides a stable contact surface that preserves gauge integrity over many cycles. This combination of material choice and dimensional control supports efficient inspection routines and shortens decision loops in production. Workshop‑ready handling and long‑term durability Built as a workshop version, the pin copes with routine use on the shop floor while remaining easy to handle. The overall length of 50 mm and a mass of approximately 0.1 kg give a convenient balance between stability and manoeuvrability for bench or fixture work. A protective transport case is supplied to reduce the risk of impact or contamination during storage and transit, helping to maintain surface quality and measurement reliability. These features mean the component is ready for immediate integration into tooling sets, inspection kits or assembly gauges without elaborate preparation. Traceability and integration into quality systems Identification and supply information are provided to support inventory and traceability: M323.F61 is listed with its GTIN, enabling straightforward recording within tracking or ERP systems. The pin is supplied as a single item and is categorised under precision gauge pins for end measurements. Its compact size and defined tolerance make it suitable as a reference for go/no‑go tests, stack‑up checks or for use inside jigs where a defined nominal diameter is required. Metav’s product documentation supports fast incorporation into inspection plans and component lists. For reliable end‑measure checks with a workshop‑grade gauge pin from Metav IndustryLine, contact Metav Werkzeuge for procurement and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F61 GTIN: 4061905068225 Label: Gauge pin, single, 15.61 mm, length 50 mm Core specifications Diameter: 15.61 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop version Protective transport case included Material: Special steel Category: Messstifte (gauge pins) FAQ What nominal diameter does this gauge pin have? The gauge pin M323.F61 has a nominal diameter of 15.61 mm, specified for precise end‑measure applications. What tolerance can be expected from the pin during inspection? The M323.F61 is produced to an accuracy of ±0.002 mm, which supports repeatable pass/fail checks and close‑fit measurements. Is the pin supplied ready for shop‑floor use and transport? Yes, the component is a workshop version supplied in a protective transport case to preserve surface condition and dimensional integrity. Which material is used for this gauge pin and how does it affect wear? The pin is made from special steel; this material selection enhances wear resistance and maintains sensible service life under regular handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.62mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy, a robust special‑steel construction and secure transport packaging for dependable inspection routines; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 15.62 mm, 50 mm length (Metav IndustryLine) The gauge pin, single, Ø 15.62 mm, 50 mm length is a workshop‑grade test pin designed for precise clearance and fit checks in production and inspection tasks. Precision ground to ±0.002 mm tolerance Diameter Ø 15.62 mm, length 50 mm Special‑steel construction, workshop version Supplied in protective transport box Consistent dimensional reliability for inspection and setup The M323.F62 gauge pin is manufactured to a ±0.002 mm dimensional tolerance, providing a reliable reference for plug, bore and clearance checks in workshop environments. Ground finishing and controlled manufacturing processes reduce profile deviation and surface defects, which supports repeatable results during assembly trials or go/no‑go testing. As a single, individual test pin, it is suitable for spot checks and for establishing reference fits where batch gauge sets are not required. The Ø 15.62 mm diameter combined with a 50 mm shank length gives a compact but stable feel when inserted into bores or used as a reference mandrel. Durable workshop construction that reduces handling risk Constructed from special steel and offered as a workshop version, this test pin resists the knocks and handling typical in production areas while preserving the functional surface finish. The chosen material balances wear resistance with cost efficiency for routine use; the modest mass and 50 mm length allow easy handling and positioning inside fixtures without compromising stability. Delivery in a protective transport box ensures the measuring surface remains clean and undamaged during storage and transit, reducing downtime for rework or repolishing and maintaining measurement confidence. Practical integration into quality workflows The single gauge pin is easy to incorporate into existing inspection routines and is compatible with standard measuring fixtures and plug gauges. Its compact dimensions make it useful for batch sampling, first‑article inspection and setting operations at assembly stations. Traceability is supported by the product identifiers, and the unit is suitable where a single, high‑precision reference is required rather than a full set. With Metav’s focus on accessible precision, the pin supports pragmatic quality assurance without excessive overhead. For workshop‑grade verification relying on Metav IndustryLine quality, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.F62 GTIN: 4061905068232 Label: Prüfstift, einzeln, 15,62 mm Länge 50 mm Category: Gauge pins (Messstifte) Facts Diameter: 15.62 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop execution Supplied individually Delivered in protective transport box FAQ What is the stated dimensional tolerance of this test pin? The test pin M323.F62 (gauge pin, single) is made to a tolerance of ±0.002 mm, enabling high‑precision reference checks. Is this gauge pin suitable for routine workshop use? Yes, the workshop version is engineered from special steel and supplied in a protective transport box, making it well suited to regular inspection and assembly tasks. Can this pin be used as a substitute for a full gauge set? The single gauge pin is intended for spot checks and setup work; it provides a precise reference where a full set is unnecessary or where individual diameters are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.63mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combine workshop-ready robustness with a tight ±0.002 mm tolerance and a precise Ø 15.63 mm diameter for consistent end‑measure checks; order via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin, single – Ø 15.63 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.F63 for precise end‑measure inspection and fixture verification in industrial metrology. Ø 15.63 mm nominal diameter, engineered accuracy Tolerance ±0.002 mm for consistent measurements 50 mm length, compact workshop version Special steel construction for sustained use Repeatable accuracy for end‑measure checks This inspection pin delivers reliable repeatability thanks to a manufacturing deviation of ±0.002 mm, which keeps tolerance stacks predictable in fixture and gauge work. A nominal diameter of 15.63 mm provides a defined end‑measure datum that is easy to reference in assembly and inspection routines. Where traceable control of mating fits is required, the tight tolerance reduces rework and supports faster pass/fail decisions; the technical specification is presented in clear numerical terms so integration into existing quality processes is straightforward. Robust, workshop-ready design that reduces interruptions Built as a workshop version, the pin combines a compact 50 mm length with a specialised steel alloy to resist wear during repeated seating and handling. The modest mass and balanced geometry allow secure seating in fixtures and minimise flex during use. The construction is intended for routine metrology tasks in production and maintenance environments, offering durability without excessive bulk. Clear, measurable attributes make it simple to plan storage, handling and replacement intervals within a scheduled inspection cycle. Smooth integration into inspection routines and documentation Designed for standard metrology environments, the pin supports quick incorporation into gauge blocks, fixture checks and terminal inspections. Its single‑piece supply simplifies inventory control, and the product identifiers facilitate documentation and traceability in QA records. Compatibility with common inspection jigs is achieved by the standardised diameter and length; where a formal specification sheet or batch information is required, Metav provides comprehensive data to support calibration and quality protocols. The measured design helps lower inspection time per component, improving throughput without compromising accuracy. For workshop‑grade precision and reliable end‑measure control, request the Metav IndustryLine M323.F63 gauge pin via Metav Werkzeuge — contact our Emmerich office for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.F63 GTIN: 4061905068249 Product: Test pin, single, Ø 15.63 mm, length 50 mm Brand: Metav IndustryLine Core measurements Diameter: 15.63 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Single piece supply Category: Gauge pins FAQ What diameter and tolerance does the pin have? The M323.F63 gauge pin has a nominal diameter of 15.63 mm with a declared manufacturing tolerance of ±0.002 mm. Which material is used for this inspection pin? The pin is manufactured from a special steel formulation chosen for wear resistance and dimensional stability in routine workshop use. For which inspection tasks is this pin suited? The gauge pin is intended for end‑measure checks, fixture verification and integration into gauge assemblies where a precise datum of Ø 15.63 mm and a 50 mm length are required. Is the item supplied as a single piece or in sets? Delivery is as a single piece (SKU M323.F63), simplifying replacement and inventory tracking. How can the product be identified for ordering and documentation? Use the SKU M323.F63 or GTIN 4061905068249 when ordering or recording the gauge pin in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.64mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Benefit from workshop-grade construction, ±0.002 mm tolerance and compact dimensions for reproducible end-measure checks; order the inspection pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, single, 15.64 mm diameter, 50 mm length — Inspection pin by Metav IndustryLine, ±0.002 mm tolerance Gauge pin, single, 15.64 mm diameter, 50 mm length is a workshop-grade inspection pin intended for precise end-measure checks, fixture set-up and repeatability testing in small-part metrology. Workshop-grade construction for daily use Diameter tolerance ±0.002 mm for reliable fits Solid special-steel body, hardened for wear resistance Consistent dimensional control for small components Small assemblies and precision fittings demand repeatable reference points. The ±0.002 mm tolerance on this inspection pin provides a stable datum for clearance checks and alignment tasks, reducing rework caused by fit variation. Classified in the Micro measuring range, the component’s Ø 15.64 mm and 50 mm length make it ideal where compact, stiff measuring elements are required — for example in fine mechanical subassemblies or small jig fixtures. The tight diameter tolerance minimises cumulative error when used as a reference in successive operations, supporting predictable production flow. Robust workshop design that endures daily use Built for shop-floor conditions, the pin is made from special steel with a focus on wear resistance and surface integrity. The workshop-grade finish stands up to repeated contact in go/no-go checks and alignment routines, ensuring long service life and stable contact geometry. A compact mass and balanced shape aid handheld positioning and reduce the chance of marking delicate components during inspection. Routine tactile checks and bench use remain straightforward thanks to the pin’s manageable profile and durable material selection. Integration into inspection and assembly workflows As a single inspection pin, this component functions well as a reference mandrel for fixtures, a locating element in gauging assemblies, or an end-stop for controlled positioning. When integrated into a dimensional control routine, its consistent diameter assists in verifying bore sizes, plug fits and alignment jigs quickly and reliably. The robust steel construction supports light clamping forces without plastically deforming, so repeatability between checks is maintained over time — a practical benefit for small-batch production and maintenance tasks. Practical handling and identification The item is supplied as a single inspection pin with clearly traceable identifiers for inventory and process control. Its compact format simplifies storage and handling in busy workshops where space and organisation matter. Marking and labelling are compatible with standard shop-floor tagging systems, which helps to maintain traceability across inspection steps and to document the use of calibrated references during quality checks. Reliability backed by experienced distribution Sourcing precision tools from a trusted partner reduces procurement risk. Metav’s distribution combines broad product availability with technical competence, supporting selection, documentation and reliable supply. The inspection pin’s stable geometry and material choice complement a pragmatic approach to metrology: effective, understandable tools that are easy to integrate into existing quality procedures and that provide measurable benefits in repeatability and reduced set-up time. For tailored advice or to secure this Metav IndustryLine gauge pin for precision workshop tasks, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: M323.F64 GTIN: 4061905068256 SKU: M323.F64 Weight: 0.1 kg Facts Diameter: 15.64 mm Length: 50 mm Tolerance: ±0.002 mm Material mass: 0.1 kg Special features Material: Special steel Workshop version Single inspection pin Classification: Micro measuring range (10–100 mm) FAQ What is the intended use for this inspection pin? The inspection pin is intended for end-measure checks, fixture alignment and plug-type gauging in small-part metrology, where a compact, stiff reference is required. What tolerance and repeatability can be expected? The gauge pin is specified with a tolerance of ±0.002 mm, delivering a reliable reference diameter for repeatable fits and alignment checks. Which materials is the pin suitable for contacting? Constructed from special steel, the pin is suitable for use against typical workshop metals and components where hard contact is acceptable; care is advised with soft or highly finished surfaces to avoid marking. Is this item suitable for fixture locating and smaller bores? Yes — with its Ø 15.64 mm diameter and 50 mm length, the pin serves well as a locating element in fixtures and for verifying smaller bores within the micro measuring range. How is the item identified for inventory and traceability? The product is supplied as a single inspection pin with the SKU M323.F64 and GTIN 4061905068256 for straightforward traceability in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.65mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Optimise inspection and setting processes by using a precisely machined gauge pin with a tight ±0.002 mm tolerance and robust special steel construction; the compact 15.65 mm diameter and 50 mm length support repeatable end‑measurement tasks. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.F65 — single inspection pin, 15.65 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin M323.F65 is a workshop‑grade inspection pin designed for accurate end measurements and setting operations in production, toolmaking and quality control applications. ±0.002 mm inspection tolerance Special steel for consistent durability 15.65 mm diameter, 50 mm length Workshop-grade single pin Precise inspection where repeatability matters Manufactured for dimensional control, this gauge pin delivers a verified positional precision of ±0.002 mm, which reduces measurement uncertainty during routine checks and setup processes. The combination of a controlled diameter of 15.65 mm and a working length of 50 mm provides a compact reference that is easy to handle while maintaining the stiffness needed for repeatable end‑measurement tasks. For workshop and small series production, such accuracy shortens inspection times and supports quicker process decisions, translating into measurable efficiency gains on the shop floor. Robust construction for everyday workshop use Built from special steel, the single‑piece design resists wear from frequent seating and unseating in gauges and jigs. The workshop configuration focuses on practicality: straightforward geometry for reliable seating, a manageable weight of 0.1 kg for safe handling, and a finish that maintains form under normal workshop conditions. These attributes make the component suitable as a reference pin for setting fixtures and verifying bore sizes, where durability and stable contact geometry are essential for maintaining control limits. Practical applications and quality assurance benefits This inspection pin suits end‑mass checks, gauge setting and reference measurements in machining, assembly and check‑fixtures. The compact dimensions and high tolerance make the component especially useful for tooling shops and maintenance departments that require a stable datum without the bulk of larger measuring aids. By integrating such a pin into a standard inspection routine, traceability of setup and a reduction in setup variation can be achieved, supporting consistent part quality across runs. Contact Metav Werkzeuge to discuss the M323.F65 gauge pin for precise end‑measurement workflows or to request detailed specification sheets from Metav IndustryLine Technical data Article number: M323.F65 GTIN: 4061905068263 Label: Gauge pin, single, 15.65 mm Ø, 50 mm length Facts Diameter: 15.65 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm ECLASS: 21170231 Special features Material: Special steel Workshop version Single-piece inspection pin Intended for end-measurements FAQ What tolerance does the pin offer? The M323.F65 gauge pin is specified to ±0.002 mm, providing high repeatability for inspection and setting tasks. Which measurements is this pin intended for? This inspection pin is intended for end‑measurements, gauge setting and reference checks in machining and tooling environments. What are the exact dimensions of the pin? The pin has a diameter of 15.65 mm and an overall length of 50 mm as supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.66mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of ±0.002 mm repeatability and robust special steel construction for reliable end‑dimension checks; the compact design and 50 mm length simplify fixture set‑up and inspection routines. Order the part directly via Metav Werkzeuge or consult the team for suitability and stock information. Test pin, single — Ø 15.66 mm, 50 mm length (Metav IndustryLine) The Test pin, single, 15.66 mm diameter, 50 mm length is a workshop‑grade inspection pin for precise end‑dimension verification and fixture alignment in mechanical workshops. Workshop‑grade construction Diameter 15.66 mm for end‑dimension checks Dimensional accuracy ±0.002 mm Delivered in protective case Consistent precision that reduces rework The compact inspection pin delivers an accuracy of ±0.002 mm, making it suitable where repeatable end‑dimension verification is essential. With a nominal diameter of 15.66 mm and a shaft length of 50 mm, this component provides a stable datum for pass/fail checks and gauging routines. Classified in the Micro range for calipers and pins (max. range 10–100 mm), it bridges fine measurement tasks and routine workshop inspection without the handling issues of larger gauges. Designed for workshop use and longevity Manufactured from special steel, the workshop version is finished to withstand regular handling and resist wear under standard workshop conditions. The compact mass and short shaft length reduce bending and enable quick placement in fixtures and nests. Delivered in a protective case, the pin arrives ready for secure storage and transport, preserving collar and diameter integrity between uses. Easy to fit into inspection workflows As a dedicated inspection pin, the component integrates into plug‑gage tests, go/no‑go fixtures and final assembly checks. Traceable identification via SKU M323.F66 and GTIN are suitable for stock keeping and process documentation. The pin’s restrained geometry helps technicians achieve fast, repeatable positioning during batch checks, contributing directly to throughput and reduced rework time. Metav support and quality assurance Sourced from Metav IndustryLine and supplied through Metav Werkzeuge, the product benefits from a European quality filter and reliable logistics. Metav’s offering aims to democratise precision by combining specialist metrology know‑how with broad availability and consistent quality control—attributes that help workshops scale inspection without compromise. For workshop metrology requiring compact, high‑repeatability inspection hardware, choose the Metav IndustryLine test pin (M323.F66) and contact Metav Werkzeuge for availability and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.F66 GTIN: 4061905069130 Category: Messstifte (inspection pins) ECLASS: 21170231 Facts Diameter: 15.66 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg SKU: M323.F66 Special features Material: special steel Workshop configuration Delivered in protective case Compact design for fixture use FAQ What is the intended use for this inspection pin? The inspection pin is designed for end‑dimension verification, fixture alignment and plug‑gage checks in workshop metrology; the M323.F66 is intended as a compact, repeatable datum for pass/fail routines. How precise is the pin and how does that affect measurements? With a stated accuracy of ±0.002 mm, the pin provides tight repeatability that reduces measurement uncertainty and helps prevent rework in production checks. Is the pin supplied ready for storage and transport? Yes, the pin is supplied in a protective case to preserve the diameter and surface finish during storage and transport. Which product identifiers should be used for ordering or stock control? Use SKU M323.F66 or GTIN 4061905069130 for ordering and inventory management; these identifiers align with Metav IndustryLine documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.67mm Gauge Pin Workshop Version 50mm Length - Metav IndustryLine
Take advantage of the combination of ±0.002 mm manufacturing tolerance, special steel construction and a compact 50 mm length for dependable end‑dimension verification in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.F67 — single precision gauge pin, Ø 15.67 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.F67 is a single inspection pin designed for end‑dimension checks and setting tasks in metalworking and fixture preparation Precision tolerance ±0.002 mm Diameter Ø 15.67 mm Length 50 mm Workshop‑grade construction Reliable verification of end dimensions for production lines The compact inspection pin provides repeatable checks of bore diameters and plug fits, reducing inspection time and scrap rates. With a diameter of 15.67 mm and a verified tolerance of ±0.002 mm, this inspection tool supports consistent go/no‑go assessment and fine adjustment of fixtures. The high dimensional fidelity translates into measurable process stability, helping to avoid rework and speed up quality control routines. Robust, workshop‑grade construction for everyday use Made from special steel, the pin is engineered for resistance against wear in routine shop use while remaining easy to handle. The 50 mm length and modest weight (0.1 kg) balance stiffness and manoeuvrability, enabling straightforward manual placement and stable seating in bores. The workshop execution ensures the component withstands repeated insertion cycles typical of setting and inspection tasks, contributing to long service life and sustained measurement performance. Simple integration into inspection and setup workflows As a single‑piece gauge pin, it slips directly into existing checking procedures and jigs, offering fast confirmation of end dimensions and assisting with set‑ups where precise locating is required. The item is part of a metric gauge pin family that complements bench gauges and plug‑gauge sets, supporting both quick on‑the‑fly checks and more formalised inspection steps. Clear identification with SKU M323.F67 aids inventory control and traceability in the workshop. Contact Metav Werkzeuge for tailored advice on the M323.F67 inspection pin and to arrange supply via our Emmerich fulfilment centre Technical Data SKU: M323.F67 GTIN: 4061905069147 eClass: 21170231 Category: Messstifte Label: Prüfstift, einzeln, 15,67 mm Länge 50 mm Facts Diameter: 15.67 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Application: end‑dimension checks (endmasse) Category: gauge pin / inspection pin FAQ What materials is this inspection pin made from? The inspection pin is made from special steel; the M323.F67 by Metav IndustryLine is intended for robust workshop use where wear resistance is important. Is the M323.F67 suitable for routine bore checks in a production environment? Yes, the gauge pin M323.F67 (SKU M323.F67) is designed for repetitive bore and plug checking and offers a tolerance of ±0.002 mm, making it suitable for routine inspection tasks. Can this pin be used for fixture setting and tool alignment? The single gauge pin is well suited to fixture setting and alignment duties; its 15.67 mm diameter and 50 mm length provide a stable locating reference during set‑up operations. How should the pin be stored to retain accuracy? Store the pin in a clean, dry environment and protect it from impacts; the workshop execution and special steel construction increase durability but correct storage preserves dimensional integrity. Does the product include traceability identifiers? The product is listed with GTIN 4061905069147 and identifiable via SKU M323.F67 for stock and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.68mm Gauge Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise end‑measurement capability and robust workshop construction to ensure repeatable inspection results; the combination of ±0.002 mm accuracy and a 15.68 mm diameter delivers tight control for component checks. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.F68 — single inspection pin, Ø 15.68 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F68 is a single inspection pin designed for precise diameter verification and end‑measure checks in workshop metrology. Diameter 15.68 mm precision fit Length 50 mm workshop version Tolerance ±0.002 mm for fine accuracy Made from special steel for robustness Accurate end‑measurements with minimal uncertainty A tight tolerance of ±0.002 mm ensures that inspection routines produce reproducible outcomes even when small deviations matter. The nominal 15.68 mm diameter gives a defined reference surface for plug‑style checks and end‑measure controls, reducing ambiguity in go/no‑go decisions. By using a solid measurement reference instead of approximate gauges, overall process capability improves; the specification emphasises repeatability and a measurable limit for decision making rather than subjective estimation. Durable workshop construction for consistent daily use The workshop specification and choice of special steel provide wear resistance and dimensional stability under routine handling. At 50 mm overall length the pin balances accessibility and rigidity, so measurements remain stable without excessive cantilevering. The compact mass (approximately 0.1 kg) simplifies handling while maintaining a solid feel in fixtures and testers. Such construction minimises surface damage and preserves the reference diameter across many cycles, supporting longer service intervals and predictable maintenance planning. Fits inspection workflows and supports traceable inventory control As a single pin for end‑measure applications, this inspection pin integrates simply into measuring benches, fixture checks and assembly control points. The plain geometry allows quick verification with comparators or micrometer setups and is suitable for repetitive sampling tests during production runs. Metav’s distribution ensures consistent availability and clear product identification for procurement and stock management, facilitating traceable ordering and faster replenishment of essential inspection tools. For reliable batch control and practical procurement, contact Metav Werkzeuge to specify the M323.F68 gauge pin and obtain personalised advice at info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data Article number: M323.F68 GTIN: 4061905069154 Facts Nominal diameter: 15.68 mm Length: 50 mm Tolerance / variation: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single inspection pin for end measurements Category: gauge pins FAQ What level of accuracy can be expected from this inspection pin? The inspection pin M323.F68 is specified with a variation of ±0.002 mm, providing fine accuracy suitable for tight end‑measure checks and repeatable workshop inspections. Which applications suit a 15.68 mm gauge pin? This diameter is intended for end‑measure verification, plug‑type checks and component diameter confirmations where a fixed reference is required during quality control. Is the pin suitable for fixture and bench use in daily production? Yes, the workshop‑specification construction and robust special steel make the pin appropriate for repetitive fixture and bench applications in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.69mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the high reproducibility offered by the 15.69 mm gauge pin combined with ±0.002 mm dimensional control and robust special‑steel construction for reliable end‑measure checks in production. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin (single) Ø 15.69 mm — 50 mm length, Metav IndustryLine A gauge pin (single) Ø 15.69 mm designed for workshop inspection and end‑measure controls in mechanical engineering and tooling environments. Precision fit Ø 15.69 mm, tolerance ±0.002 mm 50 mm hardened test pin for inspection tasks Made from special steel for wear resistance Workshop version supplied in transport case Reliable dimensional control that reduces rework The gauge pin delivers consistent results through a nominal diameter of Ø 15.69 mm and a verified variation of ±0.002 mm, which translates into repeatable positioning for go/no‑go checks and fixture set‑up. Such tight tolerances cut down on measurement scatter and downstream rework, so quality control cycles become more efficient. Where parts are batch‑inspected or used as reference end‑stops, this level of precision ensures process stability and fewer rejected assemblies. Compact size for fine mechanical and tooling use With a length of 50 mm and a compact diameter, this test pin sits in the micro-range suitable for fine mechanical work and small‑component tooling. Pins in this size class combine reach with stiffness, making them appropriate for small jigs, gauge blocks and fixture pins where space is limited but accuracy is essential. The geometry supports axial alignment and quick insertion into locating holes, enabling faster inspection routines without compromising measurement integrity. Durable materials and workshop‑ready packaging Manufactured from special steel, the component is engineered for wear resistance in everyday workshop conditions. The workshop version specification means surface treatment and hardness are selected to withstand repeated insertion and contact with mating parts. Delivery in a transport case protects the pin during storage and logistics, preserving the calibrated geometry and preventing incidental damage between uses. Integrates cleanly into inspection workflows Designed as a straightforward reference element, the pin is compatible with common metrology tools and fixtures, supporting rapid manual checks and semi‑automated inspection stations. Using this hardened test pin as a fixed reference reduces set‑up time for comparative measurements and eases the transfer of nominal dimensions across stations. The compact mass and low handling weight support single‑operator use while maintaining positional stability during measurement. For workshop‑grade end‑measure needs, choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored advice and immediate procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F69 GTIN: 4061905069161 Label: Prüfstift, einzeln, 15,69 mm Länge 50 mm Facts Diameter: 15.69 mm Length: 50 mm Weight: 0.1 kg Dimensional variation: ±0.002 mm Special features Material: special steel Workshop execution Supplied in transport case for protection Category: Gauge pin / test pin FAQ What tolerance can be expected from this gauge pin? The gauge pin provides a dimensional variation of ±0.002 mm, giving high repeatability for inspection and fixture use. Which materials is the pin suitable to work with in locating and checking operations? The test pin is made from special steel and is suited as a hardened reference for locating holes and mating parts across common workshop materials. Is the pin delivered ready for use or does it require additional finishing? The item is supplied as a workshop version and arrives ready for inspection tasks; it is protected in a transport case to preserve geometry. Can this pin be used in precision fixtures for small components? Yes, the compact dimensions and tight tolerance make it suitable for fine mechanical fixtures and end‑measure controls. What identifiers and ordering information are available for this product? Ordering details include article number M323.F69 and GTIN 4061905069161 for clear procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.6mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Robust special steel construction together with ±0.002 mm dimensional accuracy and a protective transport case provide dependable end‑dimension checks and fixture alignment. Order this test pin directly via Metav Werkzeuge or consult our specialists for specification support and fast dispatch. Test pin M323.F60 — Workshop test pin, Ø 15.6 mm, 50 mm length The test pin M323.F60 is a single workshop test pin intended for precise end‑dimension inspection and secure locating within inspection fixtures and gauges Workshop‑grade special steel construction Diameter 15.6 mm for precise fits Length 50 mm for fixture compatibility Dimensional accuracy ±0.002 mm Engineered for consistent dimensional control The M323.F60 delivers high repeatability where small deviations can cascade into costly rework. With a diameter of 15.6 mm and dimensional accuracy of ±0.002 mm, the component is suitable for close‑tolerance locating and go/no‑go checks in jigs and inspection benches. The stated tolerance refers to the maximum deviation from the nominal diameter under normal measurement and handling; this level of precision supports reliable pass/fail decisions and reduces the need for secondary measuring operations. Robust finish and hardness from the special steel minimise wear and maintain the functional fit across repeated cycles. Practical workshop compatibility and handling Designed as a workshop execution, this single test pin simplifies integration into existing fixtures and test plates. The 50 mm length offers sufficient engagement for many locating tasks without adding excessive overhang, aiding stable clamping and repeatable contact. Supplied in a dedicated transport case, the pin arrives protected against knocks and contamination—beneficial for storage and safe transport between workstations. The compact mass (approx. 0.1 kg) keeps handling straightforward and supports rapid changeover during inspection routines. Clear traceability and straightforward use in inspection workflows Traceability and identification are kept simple: the item is listed under SKU M323.F60 with GTIN 4061905068218, supporting inventory and procurement processes. For metrology procedures, the ±0.002 mm specification gives a clear acceptance band for quality records, enabling concise pass/fail criteria in documentation. Where a robust locating element is required rather than a flexible probe, this solid pin performs reliably as a reference contact or end‑stop in assembly and measuring fixtures, making it a pragmatic choice for production and workshop inspection tasks. For reliable end‑dimension checks with the M323.F60, contact Metav Werkzeuge for technical advice and prompt dispatch from Emmerich Technical data Article number: M323.F60 GTIN: 4061905068218 Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Label: Test pin, single, 15.6 mm length 50 mm Facts Diameter: 15.6 mm Length: 50 mm Dimensional accuracy: ±0.002 mm Mass: 0.1 kg Special features Workshop execution Supplied in a transport case for protection during transit Single test pin for locating and end‑dimension checks Category: Test pins FAQ What is the diameter and length of the pin? The pin has a diameter of 15.6 mm and a length of 50 mm; it is supplied as the single item M323.F60 for workshop use. What level of precision does the pin offer? The M323.F60 is specified with a dimensional accuracy of ±0.002 mm, suitable for close‑tolerance locating and inspection tasks. What material is the test pin made from? The test pin is manufactured from special steel, selected for wear resistance and stable mechanical properties in workshop environments. Is the test pin supplied ready for transport and storage? Yes, the M323.F60 is supplied in a protective transport case, which reduces the risk of handling damage and contamination during transit. How is the product identified for ordering and inventory? The item is listed under SKU M323.F60 with GTIN 4061905068218, facilitating procurement and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.71mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of high mechanical accuracy (±0.002 mm), a special‑steel construction and a compact 50 mm length that supports reliable end‑measure checks in workshop environments. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed Gauge pin M323.F71 — Precision gauge pin, 15.71 mm diameter, 50 mm length Gauge pin M323.F71 is a single precision gauge pin designed for end‑measure inspection and tight tolerance checks in workshop and production settings Workshop version for robust handling Diameter 15.71 mm, toler. ±0.002 mm Length 50 mm for compact setups Delivered in a transport case Accurate tolerances for repeatable inspection results The M323.F71 is crafted to provide consistent measurement accuracy with a stated tolerance of ±0.002 mm, making it suitable for fine inspection work where repeatability matters. The tight tolerance reduces uncertainty during end‑measure checks and supports quality control activities by delivering verifiable results. Used as a reference pin on gauges and fixtures, this test pin minimises fit variation and shortens setup times, which directly contributes to process efficiency and fewer production reworks. Designed for everyday workshop use and secure handling Produced in a workshop‑grade specification, the pin combines a 50 mm length with a 15.71 mm diameter to create a compact, easy‑to‑position component for small to medium assemblies. The special‑steel material provides durability under repeated contact and resists deformation during handling. Supplied in a sturdy transport case, the pin stays protected during storage and transit, preserving its dimensional integrity between uses and prolonging service life. Micro‑category precision and practical application With a measuring diameter of 15.71 mm, the pin falls into the micro measurement category (max 10–100 mm), offering the best compromise between stiffness and accessibility for detailed end‑measure tasks. This class is ideal for components such as small housings, bores and mating parts in assemblies where space is limited but precision is essential. The compact form factor and low mass also simplify manual positioning on inspection benches and in jigging systems, supporting faster inspection cycles and reliable pass/fail decisions. Contact Metav Werkzeuge for tailored advice on the suitability of the M323.F71 gauge pin for specific inspection routines, and to arrange procurement through our Emmerich team Technical data Article number: M323.F71 GTIN: 4061905069185 Manufacturer: Metav IndustryLine Facts Diameter: 15.71 mm Length: 50 mm Tolerance/accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Delivered in a transport case Category: Micro (measurement range 10–100 mm) FAQ What applications is this gauge pin intended for? The M323.F71 gauge pin is intended for end‑measure checks, bore gauging and fixture references where a 15.71 mm nominal diameter and ±0.002 mm tolerance are required. Is the pin suitable for repeated workshop use? Yes, the workshop version of this gauge pin, manufactured from special steel and supplied in a transport case, is designed for robust, repeated use in production environments. Does the product come with calibration? This listing does not state a specific calibration certificate; the M323.F71 is supplied ready for measurement tasks. For traceable calibration options, please consult Metav Werkzeuge. How does the micro category affect usability? Being in the micro category (measurement range 10–100 mm) means the pin balances stiffness and accessibility for fine components, making it well suited to small bores, housings and precision jigs. What is the article number for ordering and reference? Order and reference the product using article number M323.F71 (GTIN 4061905069185) when contacting Metav Werkzeuge or placing procurement requests. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.72mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
A compact workshop-grade inspection pin offering high repeatability and robust handling; the combination of a special steel body, ±0.002 mm tolerance and a protective transport case supports consistent end-size verification and reduces rework. Order the inspection pin directly via Metav Werkzeuge or request technical advice from our consultants. Inspection Pin M323.F72 — Ø 15.72 mm, 50 mm length — Metav IndustryLine The Inspection Pin M323.F72 is a workshop-grade measurement pin designed for end-dimension checks, gauge fixtures and repeatable reference points in precision production environments. Workshop version for robust use Diameter 15.72 mm for precise fit Tolerance ±0.002 mm for high accuracy Supplied in protective case for transport Reliable end-size checks with workshop durability The M323.F72 inspection pin is engineered for repeatable end-size verification, delivering a tight tolerance of ±0.002 mm that satisfies demanding inspection tasks. Its compact geometry and short overall length reduce the influence of bending and handling variation, which translates into fewer false rejects and a more stable quality process. This technical reliability supports a measurable improvement in throughput where dimensional conformity is critical. Compact dimensions, big compatibility benefits With a diameter of Ø 15.72 mm and a length of 50 mm, this pin belongs to the Micro class (10–100 mm) of measuring elements. That class is prized for providing maximum precision in a limited envelope, making it ideal for fixtures, plug gauges and end-face references where space and stiffness matter. The compact size enables integration into gauge assemblies and tooling stations without sacrificing rigidity or positional certainty. Built for everyday workshop use Manufactured from special steel and specified as a workshop version, the pin is suited to regular handling and the practical demands of production environments. The protective transport case supplied with delivery preserves surface condition during storage and transit, helping to maintain the calibrated condition of the measuring face. The construction emphasises robustness and long-term stability, which reduces maintenance intervals and supports consistent measurement results. Practical handling and process advantages Precision at this scale directly affects assembly quality and scrap rates: using a dedicated inspection pin with ±0.002 mm repeatability simplifies pass/fail checks and speeds up fixture set-up. The straightforward geometry enables quick visual alignment and easy cleaning, while the modest weight supports single-operator handling. Where multiple reference points are required, identical pins provide consistent datum locations and reduce cumulative tolerance issues in serial production. For reliable end-dimension control choose the Metav IndustryLine M323.F72 inspection pin—contact Metav Werkzeuge in Emmerich for purchasing and technical guidance to integrate this workshop-grade pin into production. Technical Data Article number: M323.F72 GTIN: 4061905069895 ECLASS: 21170231 Label: Inspection pin, single, Ø 15.72 mm, length 50 mm Manufacturer: Metav IndustryLine Dimensions & Accuracy Diameter: 15.72 mm Length: 50 mm Measuring range: 15.72 mm Tolerance / Repeatability: ±0.002 mm Weight: 0.1 kg Design & Features Material: Special steel Workshop version Supplied in protective case (for transport) Single inspection pin for end-size checks Story trigger: end-size measurements FAQ What is the primary application for this inspection pin? The M323.F72 inspection pin from Metav IndustryLine is intended for end-dimension checks, fixture references and gauge assemblies where a compact, repeatable reference is required. How precise is the inspection pin and what does that mean in practice? The pin is specified with a repeatability of ±0.002 mm, which supports high-precision checks and reduces variability in pass/fail inspections during production. Is the inspection pin delivered ready for use and protected? The M323.F72 is supplied as a single unit in a protective transport case to preserve the measuring face and surface condition during storage and movement. What material is used and is it suitable for workshop environments? Constructed from special steel and offered in a workshop version, the pin is designed for regular handling and the practical demands of production use. Can this pin be used as a datum or gauge pin in fixtures? Yes — the geometry and tight tolerance make it suitable as a reference or gauge pin in fixtures, jigs and plug-type gauges; the SKU is M323.F72 for ordering and specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.73mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the precise diameter and repeatable length for reliable end-measure checks; the combination of ±0.002 mm accuracy and a robust special steel construction supports consistent quality control. Order via Metav Werkzeuge or contact the consultants for specification support. Gauge pin M323.F73 — single inspection pin, Ø 15.73 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F73 is a workshop-grade inspection pin designed for end-measure checks and reference fits in metrology and production control environments. Workshop version, robust construction Diameter 15.73 mm with ±0.002 tolerance 50 mm length for end-measure references Special steel material for repeatable handling High-precision control for faster quality decisions The gauge pin delivers a measurable improvement in routine inspection tasks by combining a tight tolerance of ±0.002 mm with a defined diameter of 15.73 mm. Such dimensional certainty reduces interpretation during pass/fail checks and shortens inspection cycles, supporting a more efficient quality workflow. For operations that depend on repeatable end-measure references, the stable geometry of the pin minimises variation between operators and measuring points, translating directly into fewer rework loops and a lower rate of false rejects. Robust workshop design that stands up to daily use Manufactured from special steel, this inspection pin is specified for workshop environments where mechanical robustness and surface integrity matter. The 50 mm usable length gives a secure reference for axial positioning and end-face checks, while the compact mass aids quick handling during batch inspections. Delivery includes a protective transport case to prevent damage in transit and storage, preserving the pin’s calibration state and surface finish. The workshop version designation indicates a balance between precision and practical resilience for everyday metrology tasks. Practical application and integration in inspection routines As a dedicated end-measure reference, the pin is suitable for bore checks, reference seating, and use as a datum plug in fixture set-up. Integration into existing test rigs is straightforward thanks to the standardised diameter and length; the dimensional data facilitates fixture design and automated probing routines. By using a consistent reference component, traceability in inspection reports improves and the measurement chain becomes easier to validate. The controlled geometry and material choice support repeatable tactile and electronic checks, helping to meet internal quality plans and external audit requirements while offering operators a reliable measuring aid. For assured high-precision checks, request further details or place an order for the Metav IndustryLine gauge pin via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific inspection tasks Technical data SKU: M323.F73 GTIN: 4061905070136 Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 15.73 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features & applications Material: Special steel Workshop version Delivered in a protective transport case Category: Gauge pins Intended use: End-measure checks / reference fits FAQ What tolerance does the gauge pin provide? The gauge pin M323.F73 is specified with a tolerance of ±0.002 mm, making it suitable for high-precision end-measure checks in production environments. Is the pin supplied ready for inspection use? The M323.F73 is delivered ready for use and protected in a transport case; any formal calibration status will be provided if explicitly noted in the product labelling. Which applications is this inspection pin suitable for? Typical uses include bore checking, datum plug references, fixture set-up and end-measure verification where a stable, repeatable diameter and length are required. Can the gauge pin be used in automated testing setups? Yes, the standardised 15.73 mm diameter and 50 mm length make the pin compatible with many fixture and probe configurations for semi‑automated and automated inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.74mm Test Pin, Length 50mm, Workshop Version - Metav IndustryLine
Precision gauge pin in special steel with a tight ±0.002 mm tolerance and a 50 mm length ensures reliable end‑dimension checks and consistent fixture alignment; its workshop‑grade construction and protective transport case protect the pin during handling and storage. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for specification support. Gauge pin M323.F74 — workshop test pin, Ø 15.74 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F74 is a workshop‑grade reference pin designed for end‑dimension verification and precise alignment tasks in production and inspection environments. Gauge pin Ø 15.74 mm, length 50 mm Precision tolerance ±0.002 mm Workshop‑grade construction, robust handling Supplied in protective transport case Reduce rework with measurable accuracy A tight tolerance of ±0.002 mm gives clear, reproducible results for end‑dimension checks and small‑bore verification, reducing uncertainty in production control. Made from special steel, the pin keeps its geometry under mechanical stress and frequent use, which supports stable repeatability across inspection runs. The combination of a defined diameter and fixed length simplifies go/no‑go assessments and makes the component suitable as a reference tool in workholding and assembly tasks. Robust handling and safe transport for daily use The workshop‑oriented design balances durability with manageable weight, helping to avoid damage during routine handling. Delivered in a protective transport case, the pin is shielded from knocks and contamination between uses, preserving its surface finish and measurement quality. The solid construction and compact form factor make storage and retrieval straightforward on busy shop floors, supporting fast inspection cycles without added downtime. Integrates seamlessly into inspection routines Designed for practical metrology, the pin fits with common gauge sets and fixture systems and supports end‑dimension verification, alignment of bores and datum checks. The clear, stable geometry facilitates quick comparison measurements and machine set‑ups, improving throughput and quality assurance. For component checks, assembly control or bench inspection, the M323.F74 acts as a dependable reference that helps standardise measurement procedures and documentable outcomes. Contact Metav Werkzeuge in Emmerich for specification support and to request the Metav IndustryLine gauge pin M323.F74, supplied ready for workshop use Technical data SKU: M323.F74 GTIN: 4061905070143 Brand: Metav IndustryLine Item description: Single gauge pin Facts Length: 50 mm Diameter: 15.74 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop design Supplied in protective transport case Suitable for end‑dimension checks and alignment FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.F74 is manufactured with a tolerance of ±0.002 mm, providing high‑precision results for end‑dimension verification and fixture alignment. Which material is used for the pin and why does it matter? The pin is made of special steel, chosen for dimensional stability and wear resistance so the tool maintains geometry during repeated use and handling. Is the gauge pin supplied ready for workshop use? Yes, the Metav IndustryLine gauge pin M323.F74 is supplied in a protective transport case to prevent damage in transit and to keep it ready for immediate use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.75mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
High reproducibility thanks to ±0.002 mm tolerance and a 15.75 mm diameter; the robust special steel construction and compact 50 mm length support precise plug checks and fixture validation. Order directly via Metav Werkzeuge or request consultancy for application advice. Gauge pin, single 15.75 mm, 50 mm length — Precision test pin by Metav IndustryLine A gauge pin, single 15.75 mm, engineered for accurate plug and assembly checks in metrology and production control High precision ±0.002 mm tolerance Special steel for robust wear resistance Compact 50 mm length for tight fixtures Workshop-grade execution for daily use Consistent, measurable accuracy for inspection tasks The compact plug, supplied as a gauge pin, delivers repeatable results where tight dimensional control is required. With a stated tolerance of ±0.002 mm, the pin is intended for fine tolerance checks and end‑of‑line verification in production environments. The 15.75 mm diameter is suitable for standard bore checks and dimensional references; this small but precise element reduces uncertainty when validating fits and clearances. The clear numeric specification supports traceable measurement practices and integrates into existing quality workflows that demand quantitative evidence rather than subjective judgement. Durable design to withstand workshop routines Manufactured from special steel, the pin combines surface hardness and resistance to wear to retain its dimensional integrity over repeated cycles. The 50 mm length provides a balance between handling ease and engagement depth in fixtures, while the low mass (approx. 0.1 kg) aids quick positioning without compromising stability. The workshop‑grade finish and robust alloy selection minimise maintenance downtime and extend service life in high‑throughput inspection stations, thereby reducing cost per measurement through fewer replacements. Practical integration into quality control processes As a precision test element, the pin is suitable for plug checks, assembly alignment and fixture validation within manufacturing, toolmaking and inspection labs. The clear specification and industrial build enable straightforward incorporation into go/no‑go procedures, measuring jigs and automated test rigs. Traceability is supported by the product identification and numeric data, making the item easy to reference in inspection reports and procurement lists. For users seeking dependable, repeatable performance in compact form, this gauge pin offers an efficient technical solution. For tailored advice or to source Metav IndustryLine gauge pins for production use, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for personal consultation and order support. Technical data Article number: M323.F75 GTIN: 4061905070150 Brand: Metav IndustryLine Label: Gauge pin, single, 15.75 mm, length 50 mm Facts Diameter: 15.75 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Intended use: Plug checks and assembly verification Accuracy class: high‑precision inspection pin FAQ What dimensional tolerance can be expected from this gauge pin? The gauge pin is specified with a ±0.002 mm tolerance, making the Metav IndustryLine test pin (SKU M323.F75) suitable for high‑precision plug and assembly checks. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and long‑term dimensional stability during repetitive inspection cycles. Is the 50 mm length suitable for fixture and bore checks? Yes, the 50 mm length provides sufficient engagement depth for many fixture and bore verification tasks while remaining compact for tight access situations. How is the pin typically applied in production control? This precision test pin is used for plug checks, alignment validation and as a reference element in go/no‑go procedures; the clear numeric tolerance supports traceable measurement records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com