Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
19.95mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Accurate dimensional checking with a workshop‑grade inspection pin: the combination of Ø19.95 mm nominal diameter, ±0.002 mm tolerance and a 50 mm usable length ensures reliable end‑measure verification and quick go/no‑go testing; order directly via Metav Werkzeuge or consult our technical team for specification support. Gauge pin M323.J95 — single inspection pin, Ø19.95 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.J95 is a single inspection pin for fast diameter verification and end‑measure control in workshop metrology and quality checks. Single Ø19.95 mm for precise diameter checks Workshop-grade special steel construction Tolerance ±0.002 mm high accuracy Delivered in protective transport case Precision where small deviations matter This inspection pin offers a nominal diameter of Ø19.95 mm with a declared accuracy of ±0.002 mm, making it suitable for tasks where tight dimensional tolerances determine part acceptance. The compact 50 mm length keeps the pin rigid under hand use and reduces bending influence during insertion, which translates into repeatable go/no‑go or comparative checks in production and incoming‑goods inspection. The accuracy statement provides a measurable basis for decision-making and reduces the need for repeated rework. Built for everyday workshop use Constructed from special steel in a workshop configuration, the pin resists common wear mechanisms while remaining affordable for routine use. The robust material choice balances hardness and toughness so that the pin maintains its profile through repeated insertions into bores and fixtures. At around 0.2 kg, the component feels substantial without being cumbersome, supporting quick handling during assembly checks and fixture setup. The straightforward geometry is ideal for rapid in‑process inspection tasks and for use with simple hand gauges or bench fixtures. Practical handling and storage benefits Supplied as a single test pin, the item is intended for quick deployment in inspection routines and fixture validation. A protective transport case is included to maintain the gauge surface during storage and movement between workstations, preserving calibration and surface finish. Identification by SKU M323.J95 and GTIN 4061905449741 supports inventory control and traceability in quality systems. The combination of straightforward form factor and workshop‑oriented finishing reduces downtime and simplifies staff training for routine measurement tasks. For workshop metrology reassurance, order the Metav IndustryLine M323.J95 inspection pin via Metav Werkzeuge or get tailored advice from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.J95 GTIN: 4061905449741 Manufacturer: Metav IndustryLine Facts Diameter: 19.95 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Material: special steel Workshop version Single inspection pin Application: end‑measure checks FAQ What is the declared accuracy of this inspection pin? The inspection pin is specified with an accuracy of ±0.002 mm, making it suitable for precise diameter verification in routine workshop checks. Can the pin be used for go/no‑go testing of bores? Yes, the single pin is suitable for go/no‑go and insertion checks; its Ø19.95 mm nominal diameter is intended for quick acceptance testing and end‑measure verification. How should the pin be stored to maintain its accuracy? The pin is supplied in a protective transport case; store it in that case when not in use to avoid surface damage and to preserve the measurement surface for reliable checks. Is the material suitable for repeated use in production environments? The pin is made from special steel in a workshop configuration, offering a balance of wear resistance and toughness appropriate for repeated insertions in production inspection routines. How is this item identified for inventory and traceability? Identification is provided by Article number M323.J95 and GTIN 4061905449741 to support inventory management and traceability within quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.96mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high reproducibility and robust workshop design: the gauge pin provides a stable 19.96 mm reference with an accuracy of ±0.002 mm, made from special steel for durable service; order directly via Metav Werkzeuge or ask the consultants for specification support. Gauge pin M323.J96 — Metav IndustryLine precision gauge pin (19.96 mm, 50 mm length) A gauge pin M323.J96 intended as a compact reference for end measurements and repeatable checks in workshop inspection and assembly environments. Workshop-grade design for robust use Diameter 19.96 mm for end‑measure checks Length 50 mm for stable handling Tolerance ±0.002 mm for tight fits Repeatable precision that speeds up inspection The fixed diameter and tight tolerance make this pin a reliable reference for repetitive checking and go/no‑go comparisons. With a stated accuracy of ±0.002 mm, the component supports narrow assembly tolerances and reduces the need for repeated adjustment cycles, which improves throughput in quality inspection. The result is faster decision-making on the shop floor and fewer ambiguous measurements during routine controls. Built for everyday workshop conditions Manufactured from special steel and configured as a workshop‑grade tool, the pin combines wear resistance with straightforward handling. The 50 mm length provides a secure grip while remaining compact for confined inspection points, and the solid construction minimises deformation under typical use. This durability translates into longer service intervals and predictable behaviour under repeated seating and withdrawal. Simple integration into inspection routines Presented as a single gauge pin with a clear SKU and traceability data, this item slots easily into existing fixture sets, inspection benches and reference kits. The compact format supports quick exchange between stations and reduces downtime during batch checks. As part of the Metav IndustryLine range, the component benefits from a consistent supply chain and documentation that supports procurement and inventory control. For personalised advice or to source the Metav IndustryLine gauge pin M323.J96, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request the SKU M323.J96 for fast processing Technical data SKU: M323.J96 GTIN: 4061905449758 Label: Prüfstift, einzeln, 19,96 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 19.96 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg Special features Material: Special steel Workshop version Single gauge pin Application: end measurements / reference checks FAQ What is this gauge pin used for? This gauge pin is used for end measurements and reference checking in inspection and assembly tasks; the Metav IndustryLine gauge pin M323.J96 serves as a compact, repeatable reference. What tolerance does the pin provide? The pin is specified with an accuracy of ±0.002 mm, making it suitable for tight‑tolerance checks and fine fit verification. Which material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and stability under repeated use. Is the product traceable for procurement? Yes, the item is supplied with SKU M323.J96 and GTIN 4061905449758 for straightforward ordering and inventory management. Is this a workshop version tool? Yes, the design is a workshop‑grade configuration intended for robust daily use in production and maintenance settings. How heavy is the gauge pin? The pin has a mass of approximately 0.2 kg, allowing for secure handling while remaining easy to manoeuvre. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.97mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, sub-micron repeatability and compact handling for reliable end-dimension checks; order the component directly via Metav Werkzeuge or consult the Metav team for application advice. M323.J97 gauging pin – 19.97 mm diameter, 50 mm length (Metav IndustryLine) The M323.J97 gauging pin is a workshop-grade measuring pin designed for precise end-dimension verification in compact inspection setups. Workshop execution for daily shop use Diameter controlled to 19.97 mm Accuracy ±0.002 mm tolerance Made from special steel for durability Engineered for repeatable end-dimension checks The M323.J97 is designed as a purpose-built gage pin for fast verification of end dimensions and fit gauges. With a nominal diameter of 19.97 mm and an overall length of 50 mm, the pin falls into the micro measurement class (suitable for 10–100 mm ranges), which is ideal where compact geometry and stiffness matter together. The declared accuracy of ±0.002 mm supports repeatable pass/fail decisions on production lines and in inspection benches, reducing rework and measurement uncertainty while maintaining throughput. Robust construction that suits workshop demands Manufactured from special steel, this single-piece measuring pin resists wear in repetitive contact applications and preserves critical dimensions over long service intervals. The workshop execution emphasises usability: ergonomic handling, low mass (around 0.20 kg) and a finish that simplifies seating into fixtures and bore gauges. The choice of material and machining tolerances was made to balance lifetime stability with cost-efficiency, enabling frequent in-process checks without excessive tool replacement. Integrates simply into inspection and assembly workflows The pin is suitable for routine end-dimension and plug checks, and can be used directly in go/no‑go fixtures, gauge assemblies or as a reference master for quick comparative inspections. Its compact form factor facilitates easy storage alongside standard gauge sets and a short handling cycle minimises measurement time per part. For workshops seeking to raise process control without complex instrumentation, this gage pin provides a pragmatic route to tighter assembly tolerances and fewer quality excursions. Contact Metav Werkzeuge for tailored advice on integrating the M323.J97 gauging pin into inspection fixtures or to secure workshop-ready units for immediate use. Technical Data Article number: M323.J97 GTIN: 4061905449765 Label: Prüfstift, einzeln, 19,97 mm Länge 50 mm Brand: Metav IndustryLine Material: Special steel Weight: 0.20 kg Facts Diameter: 19.97 mm Length: 50 mm Accuracy: ±0.002 mm Measurement range: 19.97 mm Special features Workshop execution Single-piece gage pin Category: Measuring pins (gage pins) Suitable for end-dimension verification Intended for manual and fixture-based inspection FAQ What nominal diameter and length does this gage pin have? The M323.J97 gage pin is specified with a nominal diameter of 19.97 mm and an overall length of 50 mm for end-dimension checks. What tolerance can be expected from this measuring pin? Tolerance is declared as ±0.002 mm, providing the precision required for tight-fit inspections and repeatable go/no‑go decisions. Which material is used and how does it affect durability? The pin is manufactured from special steel; this material selection improves wear resistance and dimensional stability during repetitive contact checks. Can this pin be used directly in fixture-based gauges? Yes. The compact geometry and controlled diameter make the component suitable for mounting in go/no‑go fixtures, plug gauges and comparative inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.98mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
High-precision fit verification with a 19.98 mm diameter and ±0.002 mm tolerance paired with robust special steel construction ensures repeatable inspection results; the 50 mm length suits standard end‑measure checks. Delivered in a protective transport case, the pin supports reliable workshop routines. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for integration into production. Gauge pin M323.J98 – 19.98 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.J98 is a precision test pin intended for end‑measure and fit verification in workshop metrology and component inspection. Workshop version, robust construction Diameter 19.98 mm with ±0.002 mm tolerance Length 50 mm for end‑measure checks Supplied in protective transport case Precision that reduces rework and rejects The measuring pin delivers a high level of dimensional certainty with a stated tolerance of ±0.002 mm, making it suitable for tight fit and clearance checks where small deviations cause functional issues. With a nominal diameter of 19.98 mm, the component functions as a reliable reference for go/no‑go assessments and pass/fail checks, shortening inspection time and reducing the incidence of downstream rework. This focus on measurable accuracy supports faster quality decisions on the shop floor. Built for everyday workshop handling Designed as a workshop version, the pin is manufactured from special steel to withstand frequent handling while maintaining surface integrity. At 50 mm length the geometry suits standard end‑measure and plug checks without excess overhang, and the supplied protective case ensures safe transport and storage between uses. Classified in the micro range of measuring tools, it offers an optimum balance of rigidity and compactness for precise measurements in confined setups. Practical integration into inspection processes As a compact test pin, the item slots into established inspection routines with minimal adaptation: it can be used for hole gauging, fit verification, and end‑dimension control on assembly benches or measuring fixtures. The straightforward geometry supports rapid visual and tactile checks, while the tight tolerance improves statistical confidence in small‑batch sampling. The result is a measurable reduction in inspection cycle time and clearer pass/fail criteria for production teams. Procurement and quality assurance rationale Sourcing this precision pin from a specialist supplier provides a pragmatic supply‑chain advantage: consistent availability, a transparent quality filter and a broad portfolio minimise procurement risk. The measuring pin aligns with a workshop focus on dependable, repeatable tools that integrate into existing quality workflows and support compliance with internal inspection standards. Investing in clearly specified reference parts delivers operational stability and helps maintain production throughput. Contact Metav Werkzeuge today to discuss application suitability for the M323.J98 gauge pin and to arrange supply tailored to inspection needs Technical data SKU: M323.J98 GTIN: 4061905449772 Article name: Gauge pin, single, 19.98 mm, length 50 mm Facts Diameter: 19.98 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg ECLASS: 21170231 Special features Material: Special steel Workshop version Supplied in protective transport case Category: Gauge pin Intended use: End‑measure and fit verification FAQ Is this pin suitable for go/no‑go or fit checks? Yes. The gauge pin M323.J98, with its 19.98 mm nominal diameter and ±0.002 mm tolerance, is designed for fit verification and routine go/no‑go assessments in workshop inspection. Which materials and parts is the pin intended to check? The pin serves as a dimensional reference for metal components and machined holes in typical workshop environments; it is intended for verification of clearances and end‑dimensions rather than for machining operations. How does the workshop version differ from lab instruments? The workshop version prioritises robust handling and practical geometry for frequent use; while it maintains tight dimensional control, it is optimised for shop‑floor resilience rather than extended laboratory traceability. Is storage or transport provided for the pin? Yes. The M323.J98 is supplied in a protective transport case to prevent surface damage and to keep the pin ready for immediate use in inspection routines. Can the pin be used as a reference for fixture setup? Yes. Its precise diameter and compact length make the pin suitable as a setup or alignment reference in fixtures and measuring jigs for repetitive dimension checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.99mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Combining workshop-grade robustness, a nominal diameter of 19.99 mm and a documented accuracy of ±0.002 mm, this single gauge pin supports fast go/no‑go checks and repeatable end‑measurement tasks; order the item directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.J99 — single gauge pin, 19.99 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.J99 for precise dimensional checks and simple go/no‑go verification in industrial and workshop inspection routines. Single gauge pin 19.99 mm nominal High repeatability ±0.002 mm 50 mm length, special steel Workshop execution for robust use Consistent metrology where it matters The M323.J99 is engineered for reliable, repeatable verification during production and inspection. Its nominal diameter of 19.99 mm together with an accuracy of ±0.002 mm reduces ambiguity in tolerance checks and shortens decision loops on the shop floor. Specified tolerances are given as objective criteria for acceptance testing, which streamlines quality control and minimises rework. The result is measurable process stability rather than guesswork. Durable design for everyday workshop use Manufactured in special steel and provided in a workshop configuration, this test pin withstands routine handling and fixture engagement while maintaining dimensional integrity. The 50 mm length offers sufficient engagement depth for end‑measure and reference tasks without excess overhang, improving handling and fixturing. Robust construction and a compact form factor support fast inspection cycles and contribute to longer service intervals. Practical integration into inspection workflows The single pin format is ideal for targeted pass/fail inspections, setting reference gauges and batch sampling where simple, unequivocal results are required. Marked repeatability and the compact footprint make it easy to fit into existing inspection jigs or portable kits. Traceable measurement practice is supported by clear specification data, enabling consistent sampling plans and documented inspection outcomes across shifts and sites. Contact Metav Werkzeuge GmbH for tailored advice on implementing the M323.J99 gauge pin in production or inspection; email info@metav-werkzeuge.com or call +49 2822 7131930 for sample availability and technical guidance. Technical Data Article number: M323.J99 GTIN: 4061905449789 Manufacturer: Metav IndustryLine Facts Nominal diameter: 19.99 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg Special features Workshop execution Material: Special steel ECLASS: 21170231 FAQ What inspection tasks is this gauge pin suited for? The M323.J99 gauge pin is designed for end‑measurement checks, go/no‑go verification and reference tasks in workshop and light industrial inspection routines. How precise is the M323.J99 during routine measurements? The gauge pin offers an accuracy of ±0.002 mm, which supports clear go/no‑go decisions and high repeatability in dimensional sampling. Can the pin be used in existing jigs and fixtures? Yes, the 50 mm length and single‑pin format of the M323.J99 make it straightforward to incorporate into existing inspection jigs and portable test sets. What material is the M323.J99 made from and how does that affect use? Constructed from special steel, the M323.J99 provides robust contact surfaces for repeat measurements and resists deformation under normal workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.9mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise ±0.002 mm tolerance, robust special steel construction and a workshop‑ready transport case for dependable end‑dimension verification; order the gauge pin directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge pin, single — Ø 19.9 mm · 50 mm length (Metav IndustryLine) The gauge pin, single, Ø 19.9 mm, 50 mm length is a workshop‑grade inspection pin designed for accurate end‑dimension checks and assembly verification in production and maintenance environments. Ø 19.9 mm precision fit Tolerance ±0.002 mm Special steel construction Workshop version with transport case Precision for repeatable end‑dimension checks The inspection pin is manufactured to a tight tolerance of ±0.002 mm, delivering measurement stability suitable for fine workshop controls and final part acceptance. With a nominal diameter of 19.9 mm and a measuring length of 50 mm, the pin provides a consistent reference for plug and end‑face checks; this is particularly valuable when validating seating dimensions or clearance fits during assembly. The combination of exact diameter and low runout reduces rework and speeds up go/no‑go decisions in quality processes, translating into measurable time savings on repetitive checks. Built to withstand workshop handling Produced in special steel and specified as a workshop version, the pin balances hardness with toughness so that routine handling and light knocks do not compromise geometry. Supplied as a single, ready‑to‑use unit and presented in a transport case for safe storage, the item supports mobile inspection rounds and bench‑based verification alike. The robust finish simplifies cleaning and prevents contamination on mating surfaces, while the compact design makes integration into measurement jigs straightforward — ideal for production lines where space and repeatability matter. Practical benefits: fast inspection, fewer rejects Using a dedicated gauge pin for end‑dimension control streamlines inspection workflows: the clear size reference eliminates interpretation, reduces operator influence and shortens cycle times. The pin’s workshop configuration supports frequent handling and rapid checks during set‑up and production. Where traceability is required, the supplied product data and clearly defined specification facilitate documentation of inspection results and process decisions, helping to maintain consistent quality across batches and operators. For workshop‑grade accuracy with a ±0.002 mm specification, request the Metav IndustryLine gauge pin via Metav Werkzeuge — contact our advisors at info@metav-werkzeuge.com or +49 2822 7131930 for order guidance or compatibility notes Technical data Article number: M323.J90 GTIN: 4061905072550 Label: Gauge pin, single, 19.9 mm Ø, 50 mm length Manufacturer: Metav IndustryLine Weight: 0.2 kg Facts Diameter: 19.9 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg ECLASS: 21170231 Special features Workshop version Material: special steel Delivered in transport case Single inspection pin Application: end‑dimension verification FAQ What inspections is this pin best suited to? The gauge pin is intended for end‑dimension checks and plug‑fit verifications; the 19.9 mm diameter and 50 mm length make it suitable for checking seating diameters and clearance fits in workshop and production settings. Is the material specified for heavy‑duty environments? Manufactured from special steel and produced as a workshop version, the pin resists routine handling and is appropriate for standard industrial environments where robustness and dimensional stability are needed. How precise is the measurement standard of the pin? The inspection pin is specified to a tolerance of ±0.002 mm, offering high repeatability for go/no‑go checks and acceptance testing. Is the pin supplied ready for use and easy to store? Yes, the single pin is supplied in a transport case for safe handling and storage, supporting mobile inspection tasks and secure bench storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
190mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS3 - Metav IndustryLine
The combination of hardened, lapped gauge steel, a DIN 2250 / DIN 286 JS3 tolerance band and a substantial mass ensures consistent seating and reliable diameter references in production and inspection tasks; ideal where reproducibility is required. Order the setting ring directly via Metav Werkzeuge or ask the consultants for specification support if required. Setting ring 190 mm — M313.190 (Form C) by Metav IndustryLine A setting ring 190 mm designed for diameter verification and gauge calibration, conforming to DIN 2250 and DIN 286 with JS3 tolerance for workshop and inspection applications. Hardened, lapped gauge steel DIN 2250 / DIN 286, JS3 tolerance Form C geometry for precision seating 190 mm external diameter, stable mass Reproducible measurements through standardised tolerances The M313.190 setting ring is manufactured to DIN 2250 and DIN 286 standards with a JS3 tolerance, which translates into tightly controlled dimensional deviation across production batches. For quality control this means a defined reference for pass/fail checks and set-ups: the standardised tolerance reduces ambiguity when comparing workpieces or setting tools. The use of recognised standards also simplifies documentation and audit trails in regulated production environments, supporting reproducible results and fewer rejected parts. Stable, wear‑resistant construction that reduces measurement uncertainty Made from hardened, lapped gauge steel, the ring offers a wear-resistant contact surface and a finely finished bore that preserves accuracy over extended use. The lapping process produces a smooth, true internal surface, lowering friction and minimising contact deformation during gauging. Combined with the ring’s mass and form‑optimised geometry (Form C), handling influence and micro‑movement during measurement are reduced, so readings remain consistent even in a busy workshop environment. Practical integration into inspection and set‑up workflows The ring gauge serves as a reliable reference for go/no‑go checks, comparator set‑ups and diameter setting on tooling and fixtures. Its 190 mm external dimension and robust construction make it suitable for bench use or for incorporation into gauge blocks and fixture assemblies where a stable seating surface is required. The clear, standardised specification reduces interpretation effort for engineers and inspectors, enabling faster decision‑making and fewer iterative adjustments on the shop floor. Contact Metav Werkzeuge today for technical clarification or to confirm suitability for specific inspection tasks and workshop layouts — Metav Werkzeuge can supply the M313.190 setting ring from stock and advise on integration into existing quality systems. Technical Data Article number: M313.190 GTIN: 4054469121253 Description: Setting ring 190 mm, DIN 2250 from hardened, lapped gauge steel Facts Diameter: 190 mm Weight: 7.8 kg eClass: 21170104 TARIC / CN code: 90173000 Special features Material: hardened and lapped gauge steel Norms / Tolerances: DIN 2250 and DIN 286, JS 3 Form: Form C geometry FAQ What tolerance class does the ring comply with? The ring complies with DIN 2250 and DIN 286 and is produced to JS3 tolerance as stated in the product specification. What material and surface finish are used? The ring is manufactured from hardened, lapped gauge steel, giving a wear‑resistant and finely finished internal surface suitable for repeated gauging operations. Is the ring suitable for fixture and comparator set‑ups? Yes. The mass and Form C geometry of the ring make it well suited for stable seating in fixture applications and comparator set‑ups where a reliable diameter reference is required. Does the product data include a calibration certificate? The provided product data does not specify a calibration certificate. If a traceable calibration or specific certificate is required, please consult Metav Werkzeuge for options. What is the article number for ordering and documentation? The article number for reference is M313.190, GTIN 4054469121253. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
195mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Take advantage of a robust combination of DIN 2250 / DIN 286 conformity, hardened and lapped gauge steel and a stable 195 mm nominal diameter for reliable ring‑gauge checks and reference setups; order the setting ring directly via Metav Werkzeuge or request advice from our consultants. Setting ring 195 mm (DIN 2250) — hardened gauge steel, Form C — Metav IndustryLine The Setting ring 195 mm is a precision reference gauge for internal diameter verification and calibration tasks in workshops and inspection zones, made to DIN 2250 with a Form C geometry. DIN 2250 / DIN 286 JS 3 tolerance class Hardened and lapped gauge steel Form C geometry for ring gauges Nominal diameter 195 mm for stable reference High‑precision reference that keeps production consistent A solid ring‑gauge designed for repeatable internal diameter verification, the device serves as a stable reference for quality control. The use of hardened and lapped gauge steel ensures a wear‑resistant measuring face and long service life, while the DIN 2250 specification and JS 3 tolerance class provide a clear benchmark for conformity assessments. These characteristics reduce uncertainty in go/no‑go checks and support traceable inspection routines, improving throughput by lowering rework rates and inspection variability. Robust design for practical workshop use Engineered with Form C geometry, the component offers a dependable seating form for ring‑gauge applications where axial stability matters. The substantial mass (approx. 9.15 kg) and the 195 mm diameter combine to deliver good thermal inertia and mechanical stability during handling and short measurement cycles. The lapped finish minimises friction during insertion of mating parts, reducing the risk of scoring and preserving surface integrity—important where repeat checks are frequent and repeatability is critical. Clear standards and simplified integration into QC processes Conformity to DIN 2250 and DIN 286 communicates measurable acceptance criteria and eases integration into existing calibration schedules. Supplied as a fixed standard component, the item supports both manual verification and use as a master reference for comparators and plug‑gauge systems. The unit is particularly suited to medium‑duty inspection benches and workshop quality control stations where a robust, standards‑based reference improves confidence in dimensional decisions. Request technical specifications or place an order for the Metav IndustryLine setting ring via Metav Werkzeuge in Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M313.195 GTIN: 4054469121260 Nominal diameter: 195 mm Weight: 9.15 kg Material: hardened and lapped gauge steel Standard: DIN 2250; DIN 286; JS 3 Special form: Form C eClass: 21170104 Customs tariff number: 90173000 Facts Nominal diameter 195 mm Mass approx. 9.15 kg GTIN 4054469121260 Special features Hardened and lapped gauge steel Form C geometry Conformity with DIN 2250 and DIN 286 (JS 3) Category: Gauge / Setting ring FAQ What is the intended use of the setting ring? The setting ring is intended as a precision internal diameter reference for inspection and calibration tasks; the Metav IndustryLine setting ring (M313.195) is specified to DIN 2250 for ring‑gauge applications. What tolerance class does the ring conform to? The ring conforms to DIN 2250 and DIN 286 with tolerance class JS 3, providing a defined acceptance window for internal diameter checks. Which material is used and why is it important? Manufactured from hardened and lapped gauge steel, the surface resists wear and maintains a stable reference face, which is essential for repeatable measurements and longevity of the master. Is the geometry suitable for standard ring‑gauge holders? The Form C geometry is a common ring‑gauge form and is compatible with typical seating and holding fixtures used in workshop and inspection setups. How should the setting ring be stored to preserve accuracy? Store the ring in a dry, temperature‑stable environment and protect the lapped surfaces from impact and contamination; handling with clean gloves is recommended to avoid pressing oils onto the reference faces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Limit Go Gauge Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of the combination of hardened steel construction, DIN 7162 compliance and an integrated wear allowance on the good side for reliable, repeatable gauging in production and inspection. Order the Filetta limit gauge pin directly via Metav Werkzeuge or ask our consultants if additional technical clarification is required. Filetta Grenzlehrdorne MS911.223 – limit gauge pin, hardened steel, DIN 7162 a Filetta limit gauge pin designed for dimensional control and go/no-go gauging in workshops and inspection stations Hardened steel construction Conforms to DIN 7162 19 mm nominal diameter Wear allowance on the good side Precision and durability for routine gauging The MS911.223 is manufactured from hardened steel, a choice that secures dimensional stability and high wear resistance during frequent insertion and comparison checks. Compliance with DIN 7162 ensures the component meets recognised geometric and tolerance specifications for limit gauges, while the built‑in wear allowance on the good side prolongs service life by compensating for gradual surface loss. Together these attributes reduce replacement frequency and maintain repeatable pass/fail decisions on the production line. Designed for efficient production quality control This type of limit gauge pin is optimised for fast go/no‑go checks and routine inspection tasks where clear binary results speed up decision‑making. The compact form and standardised diameter facilitate interchange with common fixtures and gauge holders; in practice this supports lean inspection workflows and minimises downtime. Where rapid throughput and consistent judging of fit are required, the simple, robust design translates directly into measurable operational efficiency. Clear specification and dependable sourcing for procurement Specification is straightforward: nominal 19 mm diameter, hardened steel material and adherence to DIN 7162, referenced under SKU MS911.223 for ordering and inventory. For buyers seeking traceability and repeatable procurement, these concise data points simplify purchasing and ensure the gauge integrates seamlessly with existing control plans. Metav’s distribution and quality filtering further support reliable delivery into workshops and inspection rooms across Europe. For DIN 7162-compliant gauging, request the Filetta MS911.223 via Metav Werkzeuge or contact our technical advisers at info@metav-werkzeuge.com / +49 2822 7131930 to confirm fitment and application specifics. Technical Data Article number: MS911.223 Material: hardened steel Standard: DIN 7162 Nominal diameter: 19 mm Facts Product type: limit gauge pin Manufacturer: Filetta Application: dimensional control / go/no-go checks Special features Wear allowance on the good side Robust, compact design Suitable for fixture and holder systems FAQ What is the primary use of this limit gauge pin? The Filetta limit gauge pin MS911.223 is intended for quick go/no‑go checks and dimensional control of mating bores and components in production and inspection environments. Which material is used and how durable is it? Manufactured from hardened steel, the Filetta MS911.223 offers enhanced wear resistance and dimensional stability for repeated gauging operations. What does the wear allowance on the good side mean? The wear allowance on the good side allows the Filetta limit gauge pin to tolerate small surface losses over time while preserving the GO condition, extending the serviceable life of the gauge. Does this gauge meet any standards? Yes, the Filetta limit gauge pin MS911.223 is produced in accordance with DIN 7162, ensuring compatibility with recognised gauging practices and tolerancing. How should this item be referenced when ordering? Use SKU MS911.223 and the description Filetta limit gauge pin, 19 mm, hardened steel, DIN 7162 for accurate ordering and inventory tracking. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
19mm Limit Plug Gauge H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Take advantage of a compact inspection tool that combines DIN 2245 conformity, a precise H7 fit and hardened gauge steel robustness for consistent bore verification; order the limit plug gauge directly via Metav Werkzeuge or contact the consultants for application advice. Limit plug gauge M314.019 — 19.0 mm H7, DIN 2245 (Metav IndustryLine) A limit plug gauge intended for rapid checking of bore diameters to H7 tolerance in production and incoming inspection. 19.0 mm nominal diameter H7 tolerance Conforms to DIN 2245 standard Hardened gauge steel for long service life Compact 0.2 kg for straightforward handling Reliable bore verification for repeatable quality The limit plug gauge provides a deterministic check of bore conformity by offering a single, standardised reference for acceptance testing. Specified to DIN 2245 and manufactured to a 19.0 mm nominal size with an H7 tolerance, it removes ambiguity from manual measurement routines and speeds go/no-go decisions on the shop floor. This predictable verification reduces rework and supports consistent process control, making it suitable for production, quality assurance and spot checks where rapid pass/fail assessment is required. Durable construction that keeps inspection costs down Manufactured from hardened gauge steel, the mandrel resists wear and preserves dimensional integrity across repeated use. The modest mass of 0.2 kg supports easy handling during high-volume inspection loops and reduces operator fatigue, while the material choice maintains surface quality to prolong service intervals. Conformity with DIN 2245 ensures interchangeability with other standard gauges; the result is a robust tool that sustains measurement certainty and lowers total cost of ownership through extended lifetime and fewer replacements. Traceable, shop-ready design for efficient workflows Marked with SKU M314.019 and GTIN registration, the plug gauge integrates into traceability systems and inventory workflows without extra documentation effort. The compact form factor speeds handling at control stations and supports quick tooling changes between batches. Used as a limit or reference mandrel in production, it complements calibrated instrumentation by providing a simple, repeatable check that teams can apply directly at the machine or in the inspection bay, contributing to faster decisions and fewer downstream quality incidents. Request a tailored recommendation from Metav Werkzeuge for integrating Metav IndustryLine limit plug gauges into existing inspection routines, or arrange procurement directly via Metav Werkzeuge in Emmerich for immediate delivery Technical data Article number: M314.019 GTIN: 4054469121482 Manufacturer: Metav IndustryLine Material: hardened gauge steel Standard: DIN 2245 Nominal diameter: 19.0 mm Tolerance class: H7 Weight: 0.2 kg EClass: 21170218 Tariff code: 90173000 Facts Diameter: 19.0 mm Mass: 0.2 kg SKU: M314.019 GTIN: 4054469121482 EClass: 21170218 Tariff number: 90173000 Special features Limit plug gauge for bore inspection Conforms to DIN 2245 dimensional requirements Hardened gauge steel construction Compact, ergonomic handling for shop use Suitable for production and incoming inspection Traceable via GTIN and SKU FAQ What nominal size and tolerance does the gauge check? The limit plug gauge checks a nominal bore of 19.0 mm to the H7 tolerance; the specification follows DIN 2245 for dimensional conformity. Is the material suitable for long-term inspection use? Yes, the M314.019 is made from hardened gauge steel, chosen to resist wear and maintain dimensional stability over extended inspection cycles. How is the gauge identified for inventory and traceability? The tool is identified by SKU M314.019 and GTIN 4054469121482, enabling straightforward tracking in procurement and quality systems. Where is the product intended to be used within the production flow? The plug gauge is intended for rapid go/no-go checks at machine-side control stations, final inspection benches and incoming material checks to support fast acceptance decisions. Does the gauge comply with recognised standards? The M314.019 meets the dimensional requirements of DIN 2245, providing a standardised reference for bore verification Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19–20mm Gauge Pin Set 101 pcs 0.01mm Graduations With Probe Holder In Case - Metav IndustryLine
Take advantage of high precision (±0.004 mm), a comprehensive 101‑piece range and robust storage in a protective case — order the kit directly via Metav Werkzeuge or contact our consultants for application advice. Test pin set M318.589 — 101‑piece, 19–20 mm range, 0.01 mm gradation (Metav IndustryLine) The Test pin set M318.589 is a compact precision kit designed for narrow‑tolerance checks and reference gauges in inspection and toolmaking environments. 101-piece test pin set, 19–20 mm range 0.01 mm increments for fine gradation High stability from special steel construction Supplied with holder and protective case Precise measuring increments that support reproducible inspection results The set provides 0.01 mm gradation across the 19–20 mm range, enabling finely stepped inspection sequences and setup routines. With an indicated measurement accuracy of ±0.004 mm, the kit supports tight tolerances in workshop and inspection tasks where reproducibility matters. The numbered, stepped pins reduce adjustment time during iterative checks and are particularly useful for establishing reference points on fixtures, gauges and measurement rigs. The combination of fine gradation and documented accuracy helps to reduce rework and shortens throughput time on quality‑critical components. Compact, high‑stability construction for routine workshop use Built from special steel and supplied with a dedicated holder, the pins are dimensionally stable and easy to handle during repetitive tasks. The collection is classified in the Mikro category (measurement range within 10–100 mm), so it is optimised for fine mechanical work, small assemblies and precision tool rooms. Organisation is simplified by the supplied protective case, which keeps every element organised and ready for transfer between bench and inspection area. The overall kit weight reflects a complete, workshop‑grade set that resists deformation and offers long service life under normal use. Practical applications and efficiency gains for production and inspection This kit excels in set‑up, go/no‑go checking, gauge blocks supplement and comparative inspection. The 101 pins permit incremental checks without repeated machining or multiple gauge changes, supporting faster machine set‑up and shorter inspection cycles. For small‑part production, toolmaking and quality control, the pin set replaces time‑consuming makeshift techniques and provides a reproducible basis for decisions. The holder speeds interchange and reduces handling error; the protective case keeps calibration intervals regular by protecting the pins during storage and transport. Contact Metav Werkzeuge for tailored application advice and to request the Metav IndustryLine Test pin set M318.589 from our Emmerich facility Technical Data Article number: M318.589 GTIN: 4054469156262 Manufacturer: Metav IndustryLine Facts Weight: 15.5 kg Pin length: 50 mm Measurement range: 19.0–20.0 mm Increment/step: 0.01 mm Indicated accuracy: 0.004 mm Pieces per set: 101 Special features Material: special steel With test pin holder Supplied in protective case (plastic or wooden) ECLASS: 21170231 Tariff number: 90173000 FAQ What measurement range does the set cover? The Metav IndustryLine Test pin set M318.589 covers a 19.0–20.0 mm range with 0.01 mm increments for fine adjustment. How accurate are the pins for inspection tasks? The kit is specified with an indicated accuracy of ±0.004 mm, making it suitable for tight tolerance checks and repeatable inspection routines. Is a holder included with the set? Yes — the set is supplied with a dedicated test pin holder to simplify handling and interchange during measurement and set‑up activities. How is the set supplied for transport and storage? The pins are supplied organised in a protective case (plastic or wooden), which keeps components secure and minimises risk of damage during transport or bench storage. What are the typical applications for this type of pin set? Typical uses include fixture set‑up, go/no‑go validation, comparative inspection and fine setting tasks in toolmaking and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1mm Brass Feeler Gauge Set 13-Blade Conical, Antimagnetic - Metav IndustryLine
Compact set combining anti‑magnetic brass blades, a secure brass case and a fine thickness range for reliable workshop checks — ideal for maintenance and inspection routines. Order the set directly via Metav Werkzeuge or consult their specialists for application advice. Brass Feeler Gauge Set M318.017 — 13 blades, 0.05–1.00 mm, brass case A Brass Feeler Gauge Set M318.017 designed for precise gap measurement and rapid thickness checks across inspection, maintenance and assembly tasks. Antimagnetic brass blades Thickness range 0.05–1.00 mm 13 precision blades in brass case Compact 100 mm blade length Consistent thickness checks that reduce rework and downtime The set covers a thickness range of 0.05–1.00 mm, offering fine gradations for repeatable gap and clearance checks. With a reported accuracy of 0.012 mm, the blades enable fast, trustworthy decisions during routine inspections and assembly verification. Using calibrated reference gauges like these reduces the likelihood of rework, improving throughput and supporting lean workshop practices. Brass construction for non‑magnetic environments and gentle contact Manufactured from brass, the blades and shell combine corrosion resistance with low surface aggressiveness, making them suitable where magnetic influence must be avoided. The antimagnetic characteristic prevents magnetic distortion when measuring sensitive components, such as parts near magnetically susceptible sensors or hardened workpieces. A consistent blade length of 100 mm provides comfortable handling and controlled feel during insertion into narrow gaps. Organised set design that speeds up inspection workflows Thirteen individually indexed blades are housed in a brass case, keeping each thickness accessible and protected from contamination. The compact format supports quick selection and return of gauges, which reduces search time and keeps the workplace tidy. Supplied to factory standard (Werksnorm), the set is designed for everyday use in maintenance, quality control and general workshop tasks where simple, reliable measurement is required. For procurement or technical clarification about the Brass Feeler Gauge Set M318.017, please contact Metav Werkzeuge for local supply and application guidance: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.017 GTIN: 4054469127699 Category: Lehren / Measuring gauges Numbers / Core technical data Thickness range: 0.05–1.00 mm Blade length: 100 mm Blade width: 12.7 mm Accuracy: 0.012 mm Number of blades: 13 Pieces per set: 13 Special features / Versions Material: brass Case material: brass Special feature: antimagnetic Standard: Werksnorm Included thicknesses: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 / 0.60 / 0.70 / 0.80 / 0.90 / 1.00 mm FAQ Are the blades suitable for use near electronic components? Yes. The blades and shell are made of brass and are specified as antimagnetic, so the Brass Feeler Gauge Set M318.017 is appropriate for measurements near magnetically sensitive electronics and sensors. What accuracy can be expected from this feeler gauge set? The set is specified with an accuracy of 0.012 mm, providing reliable thickness references for routine workshop inspections and basic quality checks. Is the set delivered as a complete kit? The set is supplied complete with 13 blades in a brass case, organised for immediate use in maintenance and inspection tasks. Can these gauges be used for precision calibration work? These gauges are designed for workshop measurement and routine inspection. For laboratory calibration tasks, instruments with laboratory calibration certificates and tighter tolerances are recommended. What standard does the set meet? The gauges are supplied to the manufacturer's factory standard (Werksnorm), giving clear expectations for workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1mm Brass Feeler Gauge Set 20 Leaves Tapered Nickel-Plated Sheath Antimagnetic - Metav IndustryLine
Combine precise gap coverage with an antimagnetic construction and a nickel-plated sheath for reliable, repeatable measurements; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Brass feeler gauge set M318.015 — 20 blades, 0.05–1.00 mm Brass feeler gauge set for gap measurement and setting tasks in maintenance and workshop environments 20 calibrated blades 0.05–1.00 mm range Brass blades with nickel-plated sheath Antimagnetic design for stable readings Compact 100 mm length for workshop use Precise gap control for setup and service The 20 blades covering 0.05–1.00 mm provide a graded, continuous thickness range that simplifies clearance checks and valve setting. Each leaf is stamped with its nominal thickness and manufactured to a nominal tolerance of ±0.012 mm, which supports consistent results during repetitive tasks. The graded increments allow quick combination of leaves for intermediate values, reducing adjustment loops and accelerating machine set‑up—benefits that translate directly into lower downtime and more predictable process control. Durable construction that stays accurate in the workshop Constructed from brass with a nickel-plated sheath, the set balances corrosion resistance with tactile handling. The antimagnetic property prevents slight magnetic attraction from skewing leaf placement when working near ferrous surfaces, so readings remain dependable. At a working length of 100 mm and a compact format, the set is easy to position in tight spaces yet long enough for stable hand guidance. The overall robustness and low mass (approx. 0.12 kg) make the set suited to everyday workshop use without excessive wear. Practical benefits for quality and efficiency Designed as a complete blade set, this tool reduces the need for frequent measurement rework: the clear labeling and compact organiser speed selection and return to the tool tray. The combination of material choice and finish reduces sticking and eases insertion between mating parts, while the antimagnetic characteristic ensures minimal interference during precise checks. As a result, production checks, maintenance routines and assembly inspections become faster and more reproducible—supporting better first‑time quality in machining and repair operations with proven Metav IndustryLine reliability. Choose the Metav IndustryLine brass feeler gauge set M318.015 for consistent gap measurement; contact Metav Werkzeuge in Emmerich for tailored technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M318.015 GTIN: 4054469127675 Category: Lehren / Messstifte Facts Range: 0.05–1.00 mm Blades: 20 Blade length: 100 mm Width: 12.7 mm Weight: 0.12 kg Accuracy: 0.012 mm Special features Material: brass, sheath nickel-plated Antimagnetic design Delivery: set of blades Standard: Werksnorm FAQ What thickness range is covered by the blades? The set covers 0.05–1.00 mm, provided in 20 incremental blades for fine gradation and combination. Are the blades resistant to corrosion? Yes, the blades are made from brass and supplied with a nickel-plated sheath to improve surface durability. Is the set suitable near magnetic components? The antimagnetic design prevents magnetic interference, ensuring stable placement and reliable readings. How is repeatability ensured for routine checks? Consistent stamping of nominal thickness and a nominal tolerance of ±0.012 mm help reproduce measurements across repeated operations. Which brand and article number identify this tool? This tool is the Metav IndustryLine feeler gauge set, article number M318.015. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1mm Precision Feeler Gauge Set 13 Blades Stainless Steel Nickelled Case, Tolerance 0.012mm - Metav IndustryLine
Take advantage of the combination of corrosion‑resistant stainless steel construction, a finely graded 0.05–1.00 mm thickness range and a compact 13‑blade layout for reliable gap setting and repeatable measurements; order the set directly via Metav Werkzeuge or ask our consultants for specification support. Precision Feeler Gauge Set INOX — 13‑blade, 0.05–1.00 mm (Metav IndustryLine) The Precision Feeler Gauge Set INOX is a compact stainless‑steel gauge set designed for ultra‑fine gap measurement and adjustment in workshop, maintenance and metrology environments. Stainless steel blades for corrosion resistance 13 precision blades for fine incremental control Thickness range 0.05–1.00 mm in measured steps Nickel‑plated sheath for compact storage Precise increments for consistent gap setting This feeler gauge set delivers a systematic sequence of blade thicknesses from 0.05–1.00 mm, allowing controlled and repeatable gap adjustment where tolerances are tight. The blades are manufactured from stainless steel, which reduces corrosion and preserves blade geometry during repeated use. With an indicated accuracy of 0.012 mm, the set supports precise assembly tasks and routine quality checks, helping to reduce rework and improve first‑pass yield in production settings. Robust materials and ergonomic organisation Each of the 13 blades is housed in a nickel‑plated sheath that keeps the set compact and prevents blade damage during transport or storage. The blades measure approximately 100 mm in length, offering a useful working span for switchgear, valve seats and small assemblies while remaining easy to handle. The combination of corrosion‑resistant material and organised storage delivers lower lifetime cost through extended serviceability and straightforward handling on the shop floor. Practical advantages for workshops and inspection stations Designed to follow factory standard measurement practice (Werksnorm), the set is suitable for maintenance, calibration benches and assembly jigs where micro‑clearances are frequent. The clear gradation of blade thicknesses simplifies selection and reduces adjustment time, supporting efficient machine set‑up and quicker inspection cycles. As a compact precision accessory, it integrates well with other metrology tools and fits the needs of toolrooms, service engineers and quality technicians. For procurement or technical enquiries about the Metav IndustryLine feeler gauge set, contact Metav Werkzeuge for personalised advice and secure delivery to your workshop. Technical data Article number: M318.027 GTIN: 4054469127767 Customs tariff code: 90173000 Facts Measuring range: 0.05–1.00 mm Blade length: 100 mm Number of blades: 13 Individual thickness steps: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 / 0.60 / 0.70 / 0.80 / 0.90 / 1.00 Accuracy: 0.012 mm Weight: 0.07 kg Special features Material: stainless steel blades Sheath: nickel‑plated Supplied as a set Conforms to factory standard (Werksnorm) FAQ What measurement range does this feeler gauge cover? The Precision Feeler Gauge Set INOX covers 0.05–1.00 mm, with 13 defined blade thicknesses for step‑wise adjustment. Are the blades corrosion resistant? Yes — the blades are made from stainless steel and the set is supplied with a nickel‑plated sheath to protect the blades and simplify storage. Is a calibration certificate included? The set is supplied to factory standard (Werksnorm); no ISO 17025 certificate is specified for this article. What applications suit this gauge set? The set is well suited to fine mechanical work such as valve clearance setting, spark‑gap adjustment, small‑component assembly and routine inspection where small gap measurement is required. How long are the blades and how many are in the set? Each blade is approximately 100 mm long and the set contains 13 blades covering incremental thicknesses from 0.05 to 1.00 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1°–45° Angle Gauge Set 20 Leaves Factory Standard - Metav IndustryLine
The compact set combines rapid angle verification with workshop‑grade durability: a 20‑leaf angle gauge set covering 1°–45° in common increments, ideal for routine inspection and machine setup. Benefit from space‑saving storage and quick selection to maintain steady production flow. Order the (angle gauge set M318.009) directly via (Metav Werkzeuge) or ask our consultants if needed Angle gauge set M318.009 — 20 leaves, 1°–45° workshop standard A 20‑leaf angle gauge set designed for fast, repeatable checks of oblique and angular components across workshop and toolroom environments. Precision leaves from 1° to 45° Supplied as a 20‑leaf set Compact, lightweight design Fast, repeatable angle checks that fit the workflow The set is configured for quick comparative measurement: 20 leaves cover the range 1°–45° so that common pitch and taper angles are immediately available. Each leaf acts as a stable reference for go/no‑go verification or as an adjunct to a vernier or digital gauge during setup. The compact format reduces handling time and streamlines routine inspections, supporting higher throughput and fewer setup interruptions. The light construction aids handling during frequent checks without adding significant weight to tool trolleys. Workshop standard quality for reliable everyday use Manufactured to workshop standard (Werksnorm), the leaves are intended for robust day‑to‑day application rather than laboratory calibration. The set format ensures that a consistent series of angles is at hand for alignment, sieve‑fit checks and quick functional trials. The compact footprint and low mass (0.13 kg for the set) mean the kit is easy to carry between machines or to keep in a drawer for immediate access. For production environments where speed and reproducibility are priorities, the combination of rapid selection and stable reference geometry reduces rework and machine idle time. Practical applications and handling guidance The leaf set is primarily for visual and tactile verification: pair individual leaves with surface plates, edges and fixtures for instant comparative checks. Use the whole set for stepwise angle matching or select single leaves for spot checks during assembly and maintenance. Storage in a dedicated holder or compartment preserves edge integrity and simplifies retrieval. For traceable calibration or laboratory work, consider calibrated angle blocks; this set is supplied for reliable workshop use and efficient process support. For project‑specific advice or to secure the angle gauge set M318.009 from Metav Werkzeuge, contact Metav Werkzeuge for selection guidance and supply coordination. Technical data Article number: M318.009 GTIN: 4054469127637 Tariff code: 90173000 Facts Measuring range: 1°–45° Number of leaves: 20 Weight: 0.13 kg Special features Workshop standard (Werksnorm) Supplied as a set Compact, lightweight design FAQ Which angles are included in the set? The set includes 20 leaves covering angles from 1° up to 45° in common workshop increments for fast selection during inspection and setup with the angle gauge set M318.009. Is the set supplied as individual leaves or preassembled? The product is supplied as a complete 20‑leaf set, intended for immediate use in the workshop as a ready inventory of reference angles. Can the leaves be used as a calibration reference? The leaves are made to workshop standard (Werksnorm) for routine checks; for traceable calibration certificates or laboratory reference standards, calibrated artefacts should be used. What are the typical uses for this set? Typical applications include quick angle verification, machine setup, go/no‑go checks of jigs and fixtures, and rapid comparative alignment in maintenance and assembly tasks. How should the set be stored to preserve accuracy? Store the leaves in a protective holder or drawer, avoid knocks and contamination, and inspect edges before precision comparison to maintain consistent results with the angle gauge set M318.009. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–10 mm Gauge Pin Set With Holder, 0.1 mm Steps, 91 Pieces, Case - Metav IndustryLine
Take advantage of a complete 91-piece inspection range with 0.1 mm gradation and robust special steel construction for consistent workshop control; the set arrives in a secure transport case and can be ordered directly via Metav Werkzeuge or discussed with our consultants for tailored advice. Pin Gauge Set M318.525 — 1.0–10.0 mm range, 0.1 mm increments (Metav IndustryLine) The Pin Gauge Set M318.525 is a versatile precision set for rapid verification of bore diameters and go/no-go checks in production and inspection environments. 91-piece set, 1.0–10.0 mm, 0.1 mm steps Special steel for long-term wear resistance Includes pin holder for stable handling Delivered in transport case for secure storage Reliable coverage for routine inspection work The 91-piece composition, covering 1.0–10.0 mm in 0.1 mm steps, provides an immediately usable span for typical workshop and inspection tasks. Such stepwise coverage simplifies diameter checks and reduces the need for additional measuring tools, which shortens setup time and minimises machine downtime. The listed technical accuracy of ±0.004 mm offers a predictable tolerance band for pass/fail decisions; explained simply, this means that measurements taken with these pins will stay within a few micrometres of the nominal size, enabling confident go/no-go testing without elaborate measurement routines. Built to withstand workshop conditions and stay precise Constructed from special steel, the collection resists typical wear from repeated seating and removal, which preserves diameter fidelity over long service periods. The inclusion of a pin holder improves handling ergonomics and repeatability by stabilising each gauge during insertion, while the transport case protects the pins during storage and transit — an important factor when tools are moved between job sites or shifts. Together these design choices translate to lower lifecycle costs and fewer tool replacements for busy production teams. Practical application and measurable benefits for quality control This set is intended for fast verification of bores, slots and gauge holes in assembly, jigging and first-article inspection. The clear gradation in 0.1 mm increments facilitates quick selection of the nearest nominal size for a go/no-go decision, reducing the cognitive load on operators and accelerating inspection throughput. The set is also suitable for use as a workshop reference during machine set-up, alignment checks and routine maintenance tasks, where consistent tactile feedback and repeatability are more valuable than complex measurement reports. For dependable, workshop-ready precision choose the Metav IndustryLine Pin Gauge Set M318.525 — request a quotation or technical consultation from Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to ensure the set meets specific inspection requirements Technical Data Article number: M318.525 GTIN: 4054469129150 ECLASS: 21170231 Category: Messstifte Facts Pieces: 91 Measuring range: 1.0–10.0 mm Increment: 0.1 mm Accuracy: ±0.004 mm Weight: 2.6 kg Length: 50 mm Tariff number: 90173000 Special features Material: Special steel With pin holder Delivered in transport case for transport Set for bore verification and go/no-go checks Packaged as a complete workshop set FAQ What sizes are included and how fine are the steps? The Pin Gauge Set M318.525 contains 91 pins covering 1.0–10.0 mm with 0.1 mm increments, allowing close selection of nominal diameters during inspection. Is the set suitable for repeated production checks? Yes, the Metav IndustryLine set is made from special steel and designed for frequent use; the durable material and transport case help preserve dimensional accuracy across many cycles. How does the pin holder improve measurement reliability? The included pin holder stabilises each gauge during insertion, reducing angular deviation and ensuring a more repeatable seating, which improves the reliability of go/no-go assessments with the M318.525 set. Can this set replace micrometres for everyday checks? The gauge pins are intended for quick verification and go/no-go testing rather than precise dimensional reporting; they complement micrometres by offering fast pass/fail assessment and alignment checks. Is the accuracy declared adequate for workshop quality control? With an accuracy of ±0.004 mm stated, the set supports typical workshop and shop-floor inspection requirements where rapid, repeatable verification is required rather than laboratory-level metrology. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2 mm Gauge Pin Set 70 mm Step 0.01 mm, 101 Pieces In Plastic Case - Metav IndustryLine
Benefit from a 100-piece assortment that covers the 1.00–2.00 mm range in precise 0.01 mm steps, combined with a robust special‑steel construction and a compact 70 mm working length for reliable bore verification; order the gauge pin set directly via Metav Werkzeuge or consult our specialists for application advice. Pin Gauge Set M318.851 – 100-piece, 1.00–2.00 mm, 0.01 mm graduation (Metav IndustryLine) The Pin Gauge Set M318.851 is a compact inspection kit designed for accurate hole and bore gauging in production, maintenance and quality‑control environments. 100-piece set from 1.00 to 2.00 mm 0.01 mm graduation for fine increments 70 mm working length for deep bores Made from special steel for durability Accurate increments for faster inspection decisions A graduated pin set with 0.01 mm steps enables decisive go/no‑go checks where minute differences matter. The fine increments reduce interpolation and speed up tolerance assessment, so operators can document conformity or initiate corrective action with confidence. The 1.00–2.00 mm range is ideal for small‑bore components and precision fittings; selecting the correct pin size is straightforward and repeatable, which increases throughput in routine inspection tasks while reducing unnecessary rework. Durable materials and consistent handling for workshop use Constructed from special steel, the pins resist wear and maintain their diameter under frequent use, ensuring measurement stability over many inspection cycles. A 70 mm working length provides access into deeper bores without compromising control at the grip, making the set suitable for both bench and in‑machine checks. The material choice and dimensional stability together deliver long service life and minimise variability between successive measurements, supporting a dependable inspection routine that aligns with industrial quality demands. Practical organisation, traceability and calibration readiness The compact arrangement of the set keeps individual pins accessible and identifiable, which reduces handling time during repetitive checks. The set supports documentation of inspection results and simplifies traceability workflows in production and laboratory environments. Where formal verification is required, the set can be integrated into existing calibration schedules; clear identification (including SKU M318.851 and GTIN) eases record keeping for quality systems and batch traceability across the supply chain. For application-specific advice or to secure a set for your inspection bench, contact Metav Werkzeuge — our consultants will advise on suitability and supply options for Metav IndustryLine products. Technical data SKU: M318.851 GTIN: 4054469182032 Material: special steel Measurement range: 1.00–2.00 mm Graduation: 0.01 mm Working length: 70 mm Weight: 1.75 kg Facts Article type: pin gauge set Set composition: sequential pins within stated range Intended use: bore and hole gauging, go/no‑go checks Category: gauges / inspection tools Special features Compact organisation for fast selection Robust finish for workshop environments Suited to routine quality control tasks SKU reference for traceability: M318.851 FAQ Which sizes are included in the set? The set covers sizes from 1.00 mm to 2.00 mm in 0.01 mm increments, as supplied in the Pin Gauge Set M318.851. What material are the pins made from? The pins are manufactured from special steel, chosen for wear resistance and dimensional stability suitable for regular inspection use. How long are the pins and what applications suit that length? Each pin has a 70 mm working length, allowing access into deeper bores while maintaining control for bench‑level and machine‑side checks. Is the set suitable for production quality control? Yes—the sequential increments and durable construction make the set appropriate for routine production and maintenance inspections where repeatability is required. How is the set identified for traceability? Identification is facilitated by the SKU M318.851 and GTIN 4054469182032, which support documentation and integration into calibration schedules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–2mm Gauge Pin Set 70mm Length 0.05mm Steps in Plastic Case - Metav IndustryLine
Combine precise diameter grading, a 70 mm pin length and resilient special steel for reliable tolerance checks and repeatable inspection results. Order the gauge pin set directly via Metav Werkzeuge or consult our advisors if application-specific guidance is required. Gauge pin set M318.821 — Metav IndustryLine | 1.00–2.00 mm, 70 mm pins The Gauge pin set M318.821 is designed for precision tolerance checks and diameter verification in workshop and inspection environments. Precision pins 1.00–2.00 mm range 0.05 mm incremental steps 70 mm length for deeper bores Delivered in protective case Precision that speeds up inspection The M318.821 kit provides a compact series of 21 pins covering the 1.00–2.00 mm range in 0.05 mm steps, offering a fast, straightforward method for verifying hole diameters and calibration masters. Each gauge pin serves as a tactile reference for go/no-go checks and quick pass/fail decisions, reducing measuring time compared with repeated micrometre setups. The fine gradation supports controlled acceptance limits, improving throughput in routine quality checks without sacrificing precision. Robust build for reproducible results Manufactured from special steel, the pins combine dimensional stability with wear resistance suitable for workshop use. The consistent material and finishing help maintain repeatability across frequent contact measurements; pins resist minor abrasion and preserve diameter integrity over many cycles. The 70 mm length allows access to deeper bores and recessed features while maintaining stiffness for accurate seating. A protective case reduces handling damage and keeps the set organised for reliable day-to-day inspection. Practical kit for inspection workflows and small-batch production This gauge set integrates simply into inspection benches and portable tool kits. The graduated steps mean fewer instrument changes and a reduced setup burden when checking families of components. The compact arrangement supports fast selection and clear traceability during assembly or incoming inspection. As a workforce enabler, the set helps workshops and small-scale production lines to implement consistent measurement routines without complex calibration equipment, promoting efficient quality control. Discuss specific tolerance requirements with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability for your inspection tasks Technical data Article number: M318.821 GTIN: 4054469181936 SKU: M318.821 Facts Measurement range: 1.00–2.00 mm Increment: 0.05 mm Pin length: 70 mm Pieces per set: 21 Weight: 0.7 kg Special features Material: special steel Delivered in protective case Set type: gauge pin set Application: diameter verification, tolerance checks, inspection FAQ What sizes are included in the set? The set includes 21 pins spanning the range 1.00–2.00 mm in 0.05 mm increments for fine-grained diameter checks. Is the material specified for workshop durability? The pins are made from special steel, providing wear resistance and stability suitable for regular inspection use. Can the pins reach recessed bores and deeper features? Yes, the 70 mm pin length allows access to deeper bores while maintaining sufficient stiffness for accurate seating. Is a calibration certificate supplied with the kit? No calibration certificate is included by default; the M318.821 set is supplied as a ready inspection tool without a calibration document. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1–7mm Radius Gauge Set Concave And Convex 17-Piece, Hardened Carbon Steel Werksnorm - Metav IndustryLine
Take advantage of a compact, precise inspection tool that covers radii from 1.0–7.0 mm and comes as a ready-to-use 17-piece set; the combination of clear nominal steps and robust steel construction speeds up quality checks and reduces rework. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Radius Gauges Set – 1.0–7.0 mm, 17-piece (Metav IndustryLine) A Radius Gauges Set for fast visual and tactile verification of small concave and convex profiles in machining, toolmaking and inspection tasks. Concave and convex gauges for radius checks Measuring range 1.0–7.0 mm in fine steps 17 gauges for rapid comparative inspection Standard steel construction for durability Rapid, reliable checks for small radii The set enables immediate comparison of a workpiece profile with a reference gauge, which is significantly faster than calculating radii from drawings or relying on tactile feel alone. With an effective range of 1.0–7.0 mm presented in fine, sequential increments, the kit reduces inspection time and supports consistent acceptance criteria on the shop floor. The compact profile of each blade keeps warping to a minimum, so repeatability is improved when verifying small fillets and corner radii. Practical assortment that matches workshop needs The collection contains incremental radii sized to cover common machining operations, supplying a 17-piece spread of nominal values for direct matching. This arrangement is useful for quick go/no-go decisions during set-up, final inspection and tool adjustment. Each gauge is suited to both concave and convex checks, helping craftsmen and inspectors confirm that forming, deburring or finishing operations produce the intended profile without resorting to complex measuring devices. Built for everyday use in production Constructed from standard steel, the gauges withstand routine handling and retain their geometry under normal workshop conditions. The simple, slim design allows rapid placement into tight features and makes the set well suited for bench checks, inspection tables and maintenance rounds. Because the gauges are straightforward to use, training time is minimal and inspection throughput is increased, delivering a tangible efficiency gain in repetitive measurement tasks. How these gauges support quality control Using dedicated profile references eliminates subjective assessment and documents conformity faster than ad hoc methods. When integrated into an in-process check routine, the set helps to identify deviations early and prevents scrap. The clear nominal steps and the dual concave/convex capability simplify communication between operators and quality personnel: a distinct advantage when multiple teams or shifts share inspection responsibilities. Contact Metav Werkzeuge today to discuss suitability for specific parts and to order the Metav IndustryLine radius gauges set (M318.005) — our Emmerich-based advisors will recommend the optimal inspection routine for the application. Technical Data Article number: M318.005 GTIN: 4054469127606 ECLASS: 21170203 Designation: Radius gauges set, 1.0–7.0 mm Facts Measuring range: 1.0–7.0 mm Individual radii: 1.0 / 1.25 / 1.50 / 1.75 / 2.00 / 2.25 / 2.50 / 2.75 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 / 7.0 mm Pieces per set: 17 Tariff code: 90173000 Special features Concave and convex gauges Material: standard steel Factory standard (Werksnorm) Intended for workshop inspection and toolmaking FAQ What sizes are included in the set? The set contains individual radii from 1.0 mm to 7.0 mm in the incremental steps listed under Facts, enabling direct comparison across common small-radius values. Can these gauges check both concave and convex profiles? Yes, the blades are designed for concave and convex verification so a single instrument can be used to assess internal fillets and external roundings. Is this a complete inspection set or an individual tool? This is a complete 17-piece radius gauges set supplied as a matched assortment for rapid inspection and go/no-go checks. What material are the gauges made from and how durable are they? The gauges are made from standard steel, offering robustness for routine workshop handling and stability for repeated comparative checks. Which applications suit these gauges best? The set is intended for machining, toolmaking, finishing and quality control tasks where fast, visual or tactile confirmation of small radii helps avoid rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Ceramic Measurement Ball (Si3N4), 0.003 mm Accuracy, HV1400-1700 Hardness - Metav IndustryLine
Take advantage of the combination of silicon nitride (Si3N4) construction, 0.003 mm measurement accuracy and an extremely tight diameter tolerance to secure reproducible reference points in precision gauging. Order the gauge ball directly via Metav Werkzeuge or consult the technical team at our Emmerich quality hub for specification matching. Ceramic gauge ball M318.432 — Si3N4, 2 mm, 0.003 mm accuracy (Metav IndustryLine) A ceramic gauge ball M318.432 designed as a stable, wear‑resistant reference element for precision gauges, laboratory fixtures and calibration equipment. Silicon nitride ceramic Si3N4, HV1400–1700 Diameter tolerance ±0.00008 mm Measurement accuracy 0.003 mm Surface roughness Ra 0.00001 Improved measurement reliability through material and tolerance The use of Si3N4 ceramic delivers a reference sphere with exceptionally low thermal expansion and high hardness, which preserves geometry under repeated contact. With a nominal diameter of 2 mm and a verified accuracy of 0.003 mm, this sphere provides a stable datum for comparative checks and gauge calibration. The combination of tight diameter tolerance and minimal surface roughness reduces uncertainty when used as a contact element in comparative or kinematic gauging setups, supporting more consistent measurement results and fewer re‑checks. Durability and surface integrity that lower lifecycle costs High hardness (rated HV1400–1700) and an ultra‑fine surface finish (Ra 0.00001) mean the reference surface resists wear and maintains sphericity over prolonged use. This durability translates into lower replacement frequency and predictable performance in routine calibration cycles. For inspection labs and production lines where repeatability matters, the ceramic composition offers corrosion resistance and dimensional stability that steel spheres cannot match at comparable sizes. Practical integration and handling for metrology workflows Compact and lightweight, the sphere fits into standard gauge sockets, kinematic mounts and probe tips used in small‑format gaging rigs. The precise geometric specification simplifies fixturing and minimises set‑up time when transferring references between test benches. The sphere is traceable via its SKU and GTIN, enabling clear documentation in inventory and quality records and supporting consistent process control across multiple workstations. For procurement or application advice on this Si3N4 gauge ball, contact Metav Werkzeuge at our Emmerich quality hub to discuss compatibility with existing gauges and calibration routines. Technical data Article number: M318.432 GTIN: 4054469184326 Label: Messkugel aus Keramik (SI3N4), 2 mm Genauigkeit 0,003 mm Core measurements Diameter: 2 mm Measurement accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness Ra: 0.00001 Hardness: HV1400–1700 Weight: 0.08 kg Special features Material: Ceramic (Si3N4) High wear resistance and low thermal expansion Application: Gauges and precision metrology Suitable as a reference element for small‑format fixtures FAQ What is the nominal diameter and its accuracy? The ceramic gauge ball M318.432 has a nominal diameter of 2 mm with a specified measurement accuracy of 0.003 mm. Which material is used and what are the benefits? Made from silicon nitride (Si3N4), the sphere offers high hardness, low thermal expansion and excellent wear resistance compared with standard steel reference balls. How tight is the diameter tolerance and why does it matter? The diameter tolerance is ±0.00008 mm, ensuring superior sphericity for repeatable contact points and reduced measurement uncertainty in precision gauging. Can this gauge ball be used in kinematic mounts and probe tips? Yes, the M318.432 is compact and compatible with standard small‑format kinematic mounts and probe interfaces used in gauge assemblies. Is the surface finish suitable for high‑precision applications? The sphere’s surface roughness (Ra 0.00001) supports stable contact conditions and helps maintain consistent readings across repeated measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Gauge Ball Pair, Hardened Chrome Steel 0.003 mm Accuracy, Pair - Metav IndustryLine
Take advantage of a compact, hardened chrome‑steel gauge ball pair with Ø 2.00 mm and 0.003 mm nominal accuracy to secure reproducible reference points in gauges and fixtures; its high hardness (> HRC 62) and fine surface finish support long service life and stable results. Order directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge Ball Pair M318.412 — Hardened chrome steel, Ø 2.00 mm, 0.003 mm accuracy (Metav IndustryLine) A gauge ball pair intended as a high‑precision spherical reference for calibration, gauge setting and metrology applications in workshops and inspection labs Hardened chrome steel construction Precise Ø 2.00 mm diameter Nominal accuracy 0.003 mm Hardness > HRC 62, ultra‑fine surface Reliable reference for precision measurement Spherical references are fundamental when establishing repeatable contact points in gauges and inspection fixtures. These gauge spheres deliver a stated accuracy of 0.003 mm, which identifies the maximum permissible deviation from the nominal diameter for reference usage. The Ø 2.00 mm size provides a compact contact area that is ideal for micro‑components and dense fixture arrays where clearance is limited. In practice, the tight diameter tolerance of 0.00008 mm helps minimise measurement uncertainty when aligning instruments or checking master gauges, translating directly into fewer reworks and higher throughput for quality control processes. Built for durability and repeatability Constructed from hardened chrome steel, the balls combine mechanical strength with a fine surface finish to resist wear and preserve geometry over many inspection cycles. The declared hardness > HRC 62 increases abrasion resistance under repeated contact and reduces the risk of plastic deformation that might otherwise alter the reference radius. A very low surface irregularity (surface roughness 0.00001) reduces contact friction and ensures consistent probe readings. Together these characteristics support repeatable measurements and extend the service interval of the reference elements used in jigs, plug gauges and measurement benches. Practical applications and system integration Designed as a precision accessory for gauge manufacturing and workshop metrology, the spheres are supplied as a set of two to support comparative checks, master‑to‑workpiece alignment and fixture calibration. Typical applications include setting comparator mandrels, creating reference points for coordinate measuring procedures and validating miniature contact probes. Their compact form factor makes them suitable for confined setups on fixtures and small assemblies where larger reference elements would impede accessibility. The product’s specification and material choice make it a robust option for industrial routine inspection tasks as well as laboratory reference use. For precise spherical references from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored procurement and application advice to match the M318.412 to specific inspection requirements. Technical data Article number: M318.412 GTIN: 4054469184005 Description: Gauge ball pair, hardened chrome steel Data Diameter: 2.00 mm Nominal accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness: 0.00001 Hardness: > HRC 62 Weight: 0.05 kg Special features Supplied as a set of two spheres Material: hardened chrome steel Very fine finish for low friction contact Suitable for precision gauge and fixture references FAQ Are these gauge balls suitable for calibration and master checks? The gauge ball pair M318.412 is specified for use as precision reference spheres in calibration and master checks; the 0.003 mm nominal accuracy and tight diameter tolerance support reproducible reference measurements. Is a calibration certificate included with delivery? No ISO 17025 calibration or specific certificate is stated for this item; the balls are manufactured to the quoted tolerances. If a traceable calibration certificate is required, request clarification prior to purchase. What advantages does the hardened chrome steel offer? Hardened chrome steel provides high wear resistance and dimensional stability; with hardness > HRC 62 and a fine surface finish, the spheres maintain geometry under repeated contact and deliver consistent probe responses. How should the spheres be used in an inspection setup? Use the supplied pair to establish repeatable contact points for gauge setting, comparator references or to validate probe performance on small fixtures; their Ø 2.00 mm size suits confined measurement areas. What does the tolerance of 0.00008 mm mean in practice? The diameter tolerance of 0.00008 mm defines the allowable deviation from the nominal diameter; in practice this limits the contribution of the sphere to overall measurement uncertainty when used as a reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Limit Gauge Pin Wear Measurement Side, Hardened Steel, DIN 7162 - Filetta
Take advantage of precise, repeatable inspection in a compact format: robust hardened steel construction and compliance with DIN 7162 ensure reliable go/no‑go assessment and long service life; order the limit plug gauge directly via Metav Werkzeuge or request detailed specification support from our consultants. Limit plug gauge G7 (MS911.160) – hardened steel, DIN 7162 — Filetta Limit plug gauge G7 (MS911.160) for quick verification of bore tolerances in routine inspection and incoming goods control Hardened steel construction for longevity DIN 7162 compliant inspection gauge Wear allowance on the good side for service life Precision gauge pin, 2 mm nominal size Repeatable inspection that reduces rework and inspection time The limit plug gauge offers a straightforward method for verifying bore tolerances without complex measurement setups. Manufactured from hardened steel, the gauge provides consistent contact geometry and wear resistance; this translates into repeatable pass/fail checks at points of inspection, reducing the time spent on detailed measuring instruments and lowering the risk of unnecessary rework. Compliance with DIN 7162 ensures that acceptance criteria are clear and comparable across suppliers, supporting efficient quality control in production and incoming goods. Durable design with a built‑in allowance for wear A defining characteristic is the wear allowance on the good side, which compensates for gradual material loss during repeated use and maintains the defined acceptance margin for longer. The hardened substrate keeps the contact faces stable, so the gauge preserves its functional geometry under regular workshop conditions. For inspection routines where robustness and predictable service intervals matter, this design reduces downtime and the frequency of replacements, providing a reliable tool for standardised checks. Practical integration into workshop and inspection routines Designed as a simple go/no‑go instrument, the gauge is ideal for rapid checks on components during assembly, jig setting and final inspection. The compact format and clear acceptance principle make it suitable for bench use and for operators with basic training in metrology. Combined with a documented standard such as DIN 7162, the tool supports traceable inspection protocols and straightforward documentation in quality records, assisting both production staff and quality engineers in maintaining batch conformity. Discuss specification details with Metav Werkzeuge or request a technical comparison from our Emmerich hub — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS911.160 Material: hardened steel Standard: DIN 7162 Nominal size: 2 mm Special feature: wear allowance on the good side Facts Product type: limit plug gauge Brand: Filetta SKU: MS911.160 Special features Robust contact faces Suitable for go/no‑go checks Purpose: bore tolerance verification Compact inspection tool for workshop use FAQ What is the primary use of this limit plug gauge? The limit plug gauge MS911.160 by Filetta is used for rapid go/no‑go verification of internal bore tolerances during incoming inspection and production control. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened steel; this gives stable contact geometry and wear resistance, maintaining reliable inspection performance over repeated use. How does the wear allowance affect inspection intervals? The integrated wear allowance on the good side increases the effective service life by compensating for minor material loss, so maintenance and replacement intervals can be extended while preserving acceptance criteria. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
2 mm Limit Gauge Plug Gauge Wear Allowance Marking, Hardened Steel DIN 7162 - Filetta
Take advantage of a robust combination of hardened steel construction, DIN 7162 conformity and a specified wear allowance on the good side to ensure stable go/no-go inspection results; order the gauge directly via Metav Werkzeuge or consult our advisors for application support. Limit plug gauge (go/no-go) – hardened steel, DIN 7162 | Filetta The limit plug gauge is a hardened steel go/no-go instrument designed for rapid inspection of bore diameters in mechanical production and quality control environments. Hardened steel construction Conforms to DIN 7162 standard Wear allowance on 'good' side Suitable for go/no-go bore checks Reliable inspection that stabilises quality control A compact plug gauge built from hardened steel, manufactured to DIN 7162, offers a straightforward and verifiable check of bore conformity. The compact design supports quick in-process inspection, enabling repetitive pass/fail assessments with minimal setup. By using a dedicated limit gauge rather than improvised measuring methods, production lines gain predictable throughput and a reduced risk of downstream rejects, translating into measurable time savings during routine quality checks. Design detail that extends service life and repeatability The integrated wear allowance on the 'good' side compensates for gradual material loss at the contact surfaces so the "Go" dimension remains within tolerance for longer service intervals. This allowance is a pragmatic engineering measure: it preserves the reference condition of the gauge under regular use and simplifies maintenance planning. In practice, the clear distinction between the Go and No‑Go ends accelerates operator decisions and reduces subjective judgement during inspections. Robust build for workshop and production use Constructed from hardened steel and intended as a repeatable limit reference, this plug gauge is suitable for workshop inspection benches and production stop‑checks alike. The straightforward go/no-go principle means checks are fast, training effort is low and measurement routines are easy to embed into quality plans. Supplied as a standard plug gauge by Filetta, the item is particularly suited to machine shops and inspection departments that prioritise durable, standard‑compliant instruments for daily use. For tailored advice and supply from Metav Werkzeuge, order the Filetta limit plug gauge MS911.202 or request application guidance by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data Article number: MS911.202 Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on 'good' side Nominal size: 2 mm Core data Nominal size: 2 mm Special features Go/no-go functionality for bore inspection Hardened steel for extended durability Conforms to DIN 7162 specification Category: plug gauge / limit gauge Brand: Filetta FAQ What is the primary use of this plug gauge? The limit plug gauge is used for rapid go/no-go checks of bore diameters to confirm whether components meet the specified tolerance. How does the wear allowance affect inspection intervals? The wear allowance on the 'good' side extends the usable life of the gauge by compensating for contact surface wear, delaying the point at which recalibration or replacement is required. Which materials is the gauge made from? The gauge is manufactured from hardened steel, selected to provide resistance to wear and stable reference dimensions under routine workshop use. Is the gauge suitable for production floor use? Yes. The go/no-go design and rugged construction make this plug gauge appropriate for frequent checks on the production floor and at inspection stations. What identifier should be quoted when ordering or requesting spare parts? Please quote the article number MS911.202 and the Filetta brand designation when placing orders or enquiring about replacements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
2 mm Precision Feeler Gauge Set Conical Tip 20-Piece 0.1–2.0mm, 200mm Length - Metav IndustryLine
Take advantage of the combination of high repeatability, wide measurement range and a compact ring storage for efficient workshop routines; ideal for maintenance and tool setting. Order the set directly via Metav Werkzeuge or ask our consultants for application advice and supply options. Precision Feeler Gauge Set M318.023.2 – 20-piece, 0.10–2.00 mm range, 200 mm blades (Metav IndustryLine) Precision Feeler Gauge Set M318.023.2 is a workshop-ready blade set for quick clearance checks and gap measurement in mechanical assembly, maintenance and jig set-up applications *20-piece set, 0.10–2.00 mm range *Conical profile for smoother blade insertion *200 mm blade length for deep access *Ring-mounted for compact workshop storage High-accuracy gap control that speeds up setups The gauge set delivers consistent readings across a broad range from 0.10–2.00 mm, enabling fast verification of clearances, valve shims, bearing play and similar tasks. With an indicated accuracy of 0.012 mm, the blades are sized and finished to reduce measurement variation; the conical profile eases entry into tight joints and mating faces, which reduces snagging and the risk of false readings. The overall effect is fewer trial adjustments and shorter machine downtime, a pragmatic gain for production and maintenance teams alike. Practical design for demanding workshop use Blades extend to a 200 mm working length, giving access into deeper housings and assemblies where short feeler blades struggle. Each blade sits on a ring-mounted carrier for orderly storage and rapid selection; the ring keeps the set together in tool trays and trolleys while allowing individual blades to be folded out smoothly. The construction prioritises repeatable handling and quick identification of thickness, which translates into fewer handling errors during pacey measurement work. Comprehensive blade selection to cover standard tasks The set comprises twenty discrete thicknesses, listed as 0.10 up to 2.00 mm, supplied in incremental steps suitable for fine adjustment and coarse clearance checks. This spacing balances measurement resolution with pragmatic coverage of typical workshop requirements, so one set replaces multiple specialised gauges. Supplied to factory standard (Werksnorm), the blades are intended for routine inspection, go/no‑go checks and setting operations in mechanical workshops and repair shops. Faster workflows and dependable stock management Organisation and traceability reduce friction: a compact ring set with clearly marked blade sizes means faster part changeover and fewer interruptions during adjustment routines. The 20-piece grouping and the printed sizing make inventory control straightforward for stores and toolrooms. For workshops scaling up quality control, the set provides a simple, durable tool that improves first‑time assembly accuracy and supports consistent workmanship across teams. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine Precision Feeler Gauge Set M318.023.2 can be integrated into your toolroom and to arrange supply or volume procurement Technical Data Article number: M318.023.2 GTIN: 4054469164960 Brand: Metav IndustryLine Norm: Werksnorm Facts Measurement range: 0.10–2.00 mm Minimum thickness: 0.10 mm Maximum thickness: 2.00 mm Pieces per set: 20 Blade length: 200 mm Accuracy: 0.012 mm Tariff number: 90173000 Special features Conical profile Ring-mounted set 20 distinct blade thicknesses Supplied as a set FAQ What measurement range does the set cover? The Precision Feeler Gauge Set M318.023.2 covers a range from 0.10 mm to 2.00 mm with twenty distinct blade thicknesses. How accurate are the blades for clearance checks? The blades are produced with an indicated accuracy of 0.012 mm, providing repeatable measurements suitable for workshop adjustments and maintenance tasks. Are the blades easy to use inside deep housings? Yes. The 200 mm blade length and the conical profile allow access into deeper assemblies and facilitate smoother insertion during gap measurement. Is the set suitable for everyday workshop use? The ring-mounted, 20-piece configuration from Metav IndustryLine is designed for frequent use, offering rapid selection, compact storage and a broad coverage of common clearances. Does the delivery include certification or calibration? The set is supplied to factory standard (Werksnorm); no specific calibration certificate is indicated for this item in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com