Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
19.47mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise end-measurement capability combined with robust, workshop-grade construction and a compact 50 mm length for ease of handling; the result is reliable dimensional checking and less rework. Order directly via Metav Werkzeuge or request advice from our consultants. Gauge pin (single) Ø 19.47 mm, 50 mm length — Metav IndustryLine A single gauge pin for precise end measurements in workshop inspection and fixture set-up, designed as a compact, robust check standard for dimensional verification Workshop-grade execution Diameter 19.47 mm for tight fits Length 50 mm, compact handling High accuracy ±0.002 mm Reproducible end measurements for workshop use The compact cylindrical design delivers reproducible end measurements for routine inspection tasks. With a nominal diameter of 19.47 mm and a verification tolerance of ±0.002 mm, the pin functions as a reliable reference for go/no‑go checking, bore verification and fixture set-up. This level of accuracy reduces the need for repeat measurements and lowers downstream rework, improving throughput in quality control routines. The geometry supports stable seating in gauges and fixtures, which helps to maintain consistent measurement conditions and traceable results. Durable construction that suits daily handling Manufactured from special steel, this workshop-grade component combines wear resistance with dimensional stability under typical shop conditions. The 50 mm length provides a concise working dimension that is easy to position in sockets or bores while remaining stiff enough for steady contact during probing. At a mass of approximately 0.2 kg, the item is simple to handle and to integrate into test assemblies or checking sets. The robust finish and material choice ensure long service life, so replacement intervals are extended and total cost of ownership is reduced. Easy integration into inspection workflows and inventory Designed for straightforward cataloguing and use in production and inspection environments, the pin is supplied as a single test standard with a clear article identity (SKU M323.J47, GTIN 4061905072086) to simplify stock-keeping and order processing. Its compact dimensions make storage and handling space-efficient while its defined nominal diameter facilitates compatibility with existing gauges and measuring jigs. The combination of workshop-grade robustness and defined tolerance improves the repeatability of checks, helping quality teams to document conformity and meet routine inspection targets. Contact Metav Werkzeuge for specification support or procurement guidance on this Metav IndustryLine gauge pin (SKU M323.J47) to ensure suitability for specific end-measurement tasks in the workshop Technical data SKU: M323.J47 GTIN: 4061905072086 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 19.47 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Workshop execution Designed for end measurements Single-piece gauge pin Application: dimensional checking and fixture set-up ECLASS: 21170231 FAQ What is the declared tolerance of this gauge pin? The Metav IndustryLine gauge pin (SKU M323.J47) is specified with a tolerance of ±0.002 mm, suitable for precise workshop checks. Which material is used for the pin? The component is manufactured from special steel, selected for dimensional stability and wear resistance in regular inspection use. Is the length suitable for tight-fixture applications? With a 50 mm length the pin offers compact handling and is well suited to tight fixturing and bore checks where short, stiff gauges are required. Can this pin be used for end-measurement on shafts and bores? Yes; the 19.47 mm nominal diameter and robust finish make it appropriate for end-measurement tasks on shafts, bores and similar dimensional verifications. How is the item identified for ordering and stock control? Identification is via SKU M323.J47 and GTIN 4061905072086, which supports traceable ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.48mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, robust special-steel construction and workshop-ready design for consistent end‑measure checks; the pin’s ±0.002 mm tolerance and Ø19.48 mm / 50 mm geometry support reliable go/no‑go assessments and fit verification. Order directly from Metav Werkzeuge for fast replenishment or request further application details from the technical team. Gauge pin M323.J48 — single precision end‑measure pin Ø19.48 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.J48 is a single precision inspection pin designed for workshop and quality‑control checks where a defined shaft diameter and short overall length are required for end‑measure and fit verification. Workshop version for robust use Ø 19.48 mm for precise fit Tolerance ±0.002 mm ensures repeatability 50 mm length for end‑measure applications High precision where fit and repeatability matter For dimensional checks that depend on a fixed shaft diameter, the gauge pin delivers measurable benefits: the recorded ±0.002 mm tolerance provides a repeatable reference for bore verification and plug‑gage applications, reducing uncertainty in assembly and inspection tasks. In practice, this level of precision aligns with tight workshop inspection demands and supports consistent pass/fail decisions during serial checks, helping to lower rework rates and increase throughput without complicating the inspection routine. Built for the workshop — durable material and handling advantages Constructed from special steel in a workshop execution, the pin is engineered to withstand everyday handling while preserving critical dimensions. The compact 50 mm length combined with the Ø19.48 mm shaft reduces bending moments during insertion and extraction, improving durability in repetitive use. Delivery in a protective transport box ensures the reference surface remains clean and undamaged during storage and transit, maintaining traceability and dimension integrity on the shop floor. Fits into quality workflows and stock systems Traceability is supported by the product identifiers and practical format: compact inventory items like this pin simplify inspection kit assembly and test‑station readiness. The combination of a clearly defined shaft diameter and laboratory‑grade tolerance makes this pin a reliable reference for final‑size checks and short‑run assembly controls. Suppliers and inspection planners benefit from predictable interchangeability between identical pins, enabling faster fixture set‑up and fewer adjustments during production runs. Choose the Metav IndustryLine gauge pin M323.J48 for robust workshop inspection standards and contact Metav Werkzeuge in Emmerich for rapid supply and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.J48 GTIN: 4061905072635 Manufacturer brand: Metav IndustryLine Numerical data Diameter: 19.48 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Materials & features Material: Special steel Version: Workshop execution Category: Gauge pin / Messstift Delivery: Protective transport box Story trigger: end‑measure FAQ What applications suit this gauge pin best? The M323.J48 gauge pin is suitable for bore and fit checks, short‑range end‑measure verifications and assembly go/no‑go assessments where a rigid reference shaft of Ø19.48 mm and 50 mm length is required. Is the material suitable for daily workshop use? Yes, the pin is made from special steel and supplied in a workshop execution, which provides enhanced resistance to handling and preserves dimensional stability under normal inspection conditions. How tight is the tolerance and what does it mean for inspection? The pin’s tolerance of ±0.002 mm defines a narrow acceptance band, enabling repeatable measurements and clear pass/fail criteria in quality‑control routines. Can the pin be used as a reference in fixture set‑ups? Due to its defined diameter and short length, the M323.J48 pin is appropriate as a locating or reference element for fixture set‑ups in short‑run production and inspection jigs. Is the product easy to store without loss of accuracy? Delivery in a protective transport box minimises contamination and handling damage, supporting storage without adverse effects on the critical measuring surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.49mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade reference pin that combines tight repeatability (±0.002 mm) with a precisely machined 19.49 mm diameter and a compact 50 mm length for reliable end‑dimension checks; order via Metav Werkzeuge or consult our advisors for dimensioning support. Gauge pin M323.J49 – 19.49 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 19.49 mm, 50 mm is a workshop‑grade reference pin designed for end‑dimension verification and fixture setting in production and inspection environments. Workshop‑grade accuracy ±0.002 mm Precisely ground 19.49 mm diameter Compact 50 mm length for tight fixtures Precision for final‑dimension control The compact reference pin delivers ±0.002 mm positional repeatability, making it suitable where end‑dimension verification must be unambiguous and reproducible. Machined to a nominal 19.49 mm diameter, the component functions as a go/no‑go reference in fixture alignment and final checks. This level of accuracy reduces inspection ambiguity and shortens cycle time in quality control processes, providing a measurable improvement in throughput for repetitive end‑dimension tasks. Robust construction optimised for the workshop Manufactured from special steel, the pin resists wear and maintains dimensional stability under frequent handling, so set‑up intervals are extended and replacement cycles reduced. The 50 mm shank is ground and finished to ensure consistent contact geometry, which improves seating in mandrels and jigs. The workshop execution of the design prioritises practical durability and straightforward integration into existing inspection kits without sacrificing dimensional integrity. Practical handling and application benefits As a single gauge pin, the unit is easy to store and deploy for quick checks, dowel alignment and fixture setting where a compact, high‑precision reference is needed. The combination of small mass and refined surface finish minimises impact on measurement repeatability when used manually. Where traceable labelling is required, the SKU and GTIN facilitate inventory and quality documentation for manufacturing lines and inspection reports. Choose Metav IndustryLine precision for dependable end‑dimension control — order the single 19.49 mm gauge pin via Metav Werkzeuge or contact our technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and supply from Emmerich Technical data SKU: M323.J49 GTIN: 4061905072642 Manufacturer: Metav IndustryLine Category: Gauge pins (Messstifte) Facts Diameter: 19.49 mm Length: 50 mm Tolerance / Repeatability: ±0.002 mm Weight: 0.2 kg Delivery: single item Special features Material: Special steel Workshop execution Application: end‑dimension checks, fixture setting Precise ground diameter for repeatable seating FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.J49 is specified with a repeatability of ±0.002 mm, which supports high‑precision end‑dimension checks and reliable fixture alignment. Is the pin suitable for frequent shop‑floor use? Yes. The workshop‑grade construction and special steel material make the single gauge pin appropriate for repeated handling and routine inspection tasks. Can this pin be used to set up jigs and fixtures? Absolutely. The 19.49 mm diameter and 50 mm length are deliberately compact for setting and aligning fixtures where tight positional references are required. How is the product identified for inventory and traceability? Identification is facilitated by the SKU M323.J49 and GTIN 4061905072642, allowing straightforward tracking within quality documentation systems. What applications does this type of gauge pin cover? Typical uses include end‑dimension verification, dowel seating checks, fixture and jig alignment, and go/no‑go referencing where a precise, compact reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.4mm Gauge Pin, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of exacting tolerances, compact dimensions and robust special-steel construction for reliable end-measurement tasks; request the item directly via Metav Werkzeuge or contact our consultants for further specification advice. Gauge pin M323.J40 – 19.40 mm diameter, 50 mm length (Metav IndustryLine) A single workshop-grade gauge pin designed for precise end measurements and quality checks in production and inspection contexts. Workshop-grade special steel Diameter 19.40 mm ±0.002 50 mm overall length Traceable SKU M323.J40 Precision and repeatability for inspection tasks The gauge pin is crafted to provide consistent dimensional reference in inspection and setup operations. With a nominal diameter of 19.40 mm and a verified tolerance of ±0.002 mm, the component serves as a dependable master for end‑measurements and fit checks where tight limits matter. The compact 50 mm overall length balances handling and stability, allowing accurate seating in bores or against datum faces without excess overhang. This combination of diameter accuracy and short, rigid form reduces measurement uncertainty and supports reproducible results across batch checks. Practical workshop design that supports regular use Engineered in a workshop configuration, the pin uses special steel selected for dimensional stability under typical shop conditions. The robust material and ground finish make the pin suitable for frequent insertion checks and fixture set‑up without immediate wear-related drift. The modest weight and compact size aid handheld positioning and machine-mounted applications, while the plain, functional design keeps handling straightforward. The instrument is presented as a precise, no-frills reference piece for everyday metrology tasks, offering a durable solution where simple, fast verification is required. Traceability and workflow integration for quality control The gauge pin is prepared for direct integration into existing quality processes: it carries the internal identifier M323.J40 and the global GTIN for clear traceability. Such labelling simplifies inventory control and documentation within inspection plans and production records. Use as a reference gauge in go/no‑go checks, fixture alignment and end‑dimension verification complements existing measurement equipment and supports consistent quality decisions. The compact form factor and certified tolerance enable straightforward implementation in both manual and semi‑automated inspection routines. For workshop-ready precision from Metav IndustryLine, request the M323.J40 gauge pin via Metav Werkzeuge in Emmerich or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific applications Technical data Article number: M323.J40 GTIN: 4061905449932 Brand: Metav IndustryLine Label / description: Gauge pin, single, 19.4 mm diameter, length 50 mm Numbers / core technical data Diameter: 19.4 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.2 kg Material / special features Material: Special steel Workshop execution Category: Gauge pins (inspection pins) FAQ What accuracy can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, which defines its dimensional accuracy for end‑measurement tasks with the Metav IndustryLine inspection pin M323.J40. Is the pin suitable for repeated assembly checks and fixture set‑up? Yes, the workshop execution and special steel construction make the M323.J40 gauge pin suitable for frequent use in fixture alignment and go/no‑go verification. How is the product identified for traceability in quality systems? Identification is provided by the SKU M323.J40 and the GTIN 4061905449932, facilitating integration into inventory and inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.51mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
High-precision gauge pin with a tolerance of ±0.002 mm, Ø 19.51 mm and 50 mm length for repeatable end‑dimension checks; robust workshop version in special steel that supports reliable fixture alignment and inspection routines. Order the M323.J51 gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. M323.J51 gauge pin — Ø 19.51 mm, length 50 mm (Metav IndustryLine) M323.J51 gauge pin for end‑dimension verification and fixture positioning in workshop and production environments Precision tolerance ±0.002 mm Diameter 19.51 mm, length 50 mm Workshop-grade special steel construction Supplied as a single piece for inventory control Accuracy that shortens inspection times The M323.J51 functions as a high‑accuracy reference pin for end‑dimension checks and alignment tasks. With a verified tolerance of ±0.002 mm, the component provides a measurable basis for acceptance criteria and reduces the need for repeat measurements. Using a fixed‑diameter 19.51 mm pin simplifies go/no‑go assessments and helps to standardise inspection routines across shifts, which supports faster decision‑making and lower scrap rates. The tight tolerance is particularly beneficial where repeatability and interchangeability are essential in assembly and jigs. Robust design for everyday workshop use Built as a workshop version, this pin is manufactured from special steel chosen for wear resistance and dimensional stability under handling. The 50 mm length and compact form make it easy to seat in fixtures or test blocks while keeping operator handling straightforward. The component’s weight of 0.2 kg gives a reassuring feel without unnecessary bulk. The single‑piece supply format aids stockkeeping and ensures that each item is traceable within a production batch, supporting consistent measurement practice and longevity under regular use. Traceability and practical integration into inspection workflows The gauge pin is optimised for practical use: the clear designation and supplied SKU simplify ordering and inventory management, while the robust finish minimises contamination risk during repeated insertions. As a standardised reference, the pin supports process control strategies that reduce setup time and improve throughput. For specialised applications where a reference pin replaces time‑consuming measuring sequences, this component contributes directly to operational efficiency and reproducible assemblies. For technical queries regarding fitment into gauges or fixtures, Metav Werkzeuge can advise on compatible systems and layout considerations. Contact Metav Werkzeuge today for tailored application advice and to secure the M323.J51 gauge pin for precise end‑dimension control and fixture alignment Technical data Article number: M323.J51 GTIN: 4061905072666 Label: Prüfstift, einzeln, 19,51 mm Länge 50 mm Category: Gauge pin (Messstifte) Facts Diameter: 19.51 mm Length: 50 mm Weight: 0.2 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop version Supplied individually FAQ What is the primary application of this gauge pin? The M323.J51 gauge pin is intended for end‑dimension checks, fixture alignment and go/no‑go reference tasks in workshop and production settings. Is the tolerance suitable for precision assembly checks? Yes, the ±0.002 mm tolerance of the M323.J51 makes it suitable for high‑precision assembly checks where tight repeatability is required. What material is used and how does it affect durability? The pin is made from special steel, chosen for wear resistance and dimensional stability under repeated handling and insertion. Can this pin be used to set up jigs and fixtures? Yes, the M323.J51 is designed for fixture positioning and supports reliable alignment during setup and assembly operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.52mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining high repeatability and a hardened special‑steel construction makes this single gauge pin a dependable reference for end‑measure inspections; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, Ø 19.52 mm, length 50 mm — Metav IndustryLine Gauge pin, single, Ø 19.52 mm, length 50 mm is a compact inspection pin suited to precise end‑measure checks and reference measurements in workshop and production environments Precision tolerance ±0.002 mm Special steel construction Diameter Ø 19.52 mm, length 50 mm Workshop version for robust use Reliable reference for end‑measure inspection A robust inspection pin serves as a simple, low‑risk reference when verifying final dimensions. The supplied single pin is manufactured from special steel and produced to a tolerance of ±0.002 mm, which is expressed as the permitted variation in its diameter. In practical terms, this level of precision is suitable for fine mechanical checks and serial inspection tasks where a stable reference surface is required. The compact design and fixed 50 mm length make the pin easy to position in gauges, fixtures and manual test rigs, and the solid construction keeps handling errors minimal. Designed for workshop durability and repeatability This workshop‑grade pin is described as a workshop version, which indicates a focus on durability under frequent use. The choice of special steel improves resistance to wear while maintaining dimensional stability over repeated cycles. Because the part is a single, hardened reference element, it can be used in comparative checks, plug gauges or as a stop in assembly jigs. The construction aims to reduce surface deformation and preserve the roundness and straightness that are essential for repeatable measurements. Practical benefits during inspection and assembly Using a fixed‑dimension gauge pin simplifies go/no‑go assessments and shortens test sequences: the clear nominal Ø 19.52 mm and fixed length eliminate interpretation during quick checks. As a single reference element, the pin can be combined with micrometric instruments or comparator setups to document conformity of end‑masses and mating components. The straightforward geometry allows secure seating in fixtures and reduces set‑up time, delivering measurable gains in throughput for repetitive quality checks. Integration into quality processes The simple geometry and defined tolerance make the item suitable as a traceable reference in routine inspection protocols. Where dimensional conformity must be logged, the pin can function as a master reference against which production samples are compared; its precision supports reliable decision thresholds during acceptance testing. For users standardising inspection across several stations, the single pin reduces complexity and provides a consistent datum that is readily incorporated into quality documentation. Contact Metav Werkzeuge for tailored inspection advice and request the Metav IndustryLine gauge pin M323.J52 to support accurate end‑measure checks in your workflow Technical data Article number: M323.J52 GTIN: 4061905072673 Manufacturer: Metav IndustryLine Facts Diameter: 19.52 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Material: Special steel ECLASS: 21170231 Special features Single inspection/gauge pin Workshop version Application: end‑measure checks and reference measurements FAQ What is the nominal diameter of this gauge pin? The nominal diameter is 19.52 mm for the gauge pin (Metav IndustryLine, SKU M323.J52). How accurate is the inspection pin? The inspection pin is produced to a tolerance of ±0.002 mm, enabling high repeatability for end‑measure inspections. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and dimensional stability in workshop conditions. Can the pin be used as a master for plug gauge assemblies? Yes, the single gauge pin is suitable as a fixed reference or master element in plug gauge and fixture applications to check mating dimensions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.53mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high-precision tolerance (±0.002 mm), a 19.53 mm nominal diameter and the compact 50 mm length to ensure repeatable end measurements and fixture verification in the workshop; order the part directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.J53 — single gauge pin, 19.53 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.J53 is a single precision datum pin designed for end‑measurement and bore‑checking tasks in inspection, jigs and fixture alignment across general workshop use. Workshop version, robust construction Diameter 19.53 mm, tolerance ±0.002 mm 50 mm length, special steel Precision that stabilises inspection routines This datum pin delivers repeatable results by combining a nominal 19.53 mm diameter with a declared positional tolerance of ±0.002 mm, which corresponds to a deviation of just 2 µm. Such precision reduces measurement uncertainty in end‑of‑line checks and helps maintain tighter process control during setup inspections. The compact form factor supports quick placement in gauges and fixtures, while the hardened special steel construction provides wear resistance that keeps the effective diameter stable over many cycles, reducing recalibration frequency and downtime. Designed for workshop realities and fixture integration Engineered as a workshop variant, the pin resists knocks and handling common in production environments without compromising accuracy. The 50 mm overall length offers sufficient engagement for most bore and end‑face verifications while remaining manoeuvrable for manual probing and quick-change fixture systems. The robust finish simplifies compatibility with standard clamping or locating mounts and supports use as a reference element in assembly jigs, thereby streamlining the inspection workflow and improving throughput. Simple specification for confident procurement Specification is straightforward: nominal diameter 19.53 mm, length 50 mm, material special steel, and an accuracy of ±0.002 mm. This clarity aids purchasing and engineering decisions by matching the pin directly to tolerance requirements and fixture designs. As a single, individually supplied datum pin, it integrates easily into existing inspection sets and can be ordered as a spare or replacement component for maintenance kits, ensuring continuity in measurement capability across the shop floor. Contact Metav Werkzeuge for application guidance or to order the M323.J53 gauge pin directly from Emmerich: phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.J53 GTIN: 4061905072680 Label: Gauge pin, single, 19.53 mm, length 50 mm Facts Diameter: 19.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Material: special steel Workshop execution Category: gauge pins Application focus: end measurements / bore checking FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.J53 is specified to ±0.002 mm, providing a high level of dimensional certainty suitable for precision inspection and fixture reference work. Is the material suitable for repeated workshop use? Yes, the pin is made from special steel and produced as a workshop version, offering durability and wear resistance for repeated measurement cycles. Can this pin be used as a reference in jig and fixture assemblies? The compact 50 mm length and robust construction make the M323.J53 well suited for integration into jigs and fixtures as a datum or locating element. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.54mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade gauge pin that combines a precise 19.54 mm diameter, a tight tolerance of ±0.002 mm and robust special‑steel construction for consistent end‑measure checks; supplied in a protective transport case for safe handling—order the part directly via Metav Werkzeuge or consult their specialists for application advice. Test pin M323.J54 – Gauge pin, 19.54 mm diameter, 50 mm length (Metav IndustryLine) The Test pin M323.J54 is a single gauge pin designed for precise end‑measurement and fit verification in workshop and inspection environments, offering workshop‑grade robustness in a compact 50 mm length. Workshop-grade construction Diameter 19.54 mm for precise fits Tolerance ±0.002 mm for consistent measurement Supplied in protective transport case Reliable fit and repeatable measurements The compact design delivers a defined contact geometry that simplifies end‑measure tests and go/no‑go inspections. With a nominal diameter of 19.54 mm and a verified tolerance of ±0.002 mm, the pin provides a measurable baseline that reduces setup variation and rejects caused by dimensional uncertainty. This level of repeatability helps streamline quality checks and supports efficient production control by lowering the need for rework. Built for daily workshop use and handling Manufactured from special steel, the gauge pin balances wear resistance with dimensional stability across repeated use. The 50 mm length provides a practical engagement depth for many fixtures and workpieces while remaining easy to position. Supplied as a workshop‑execution item and delivered in a protective transport case, the component is protected during storage and transport, which preserves the critical measuring surface and extends service life. Seamless integration into inspection workflows Marked with the product code and traceable identifiers, the gauge pin suits routine fit checks, end‑measure verifications and fixture trials in metalworking shops and assembly lines. Its compact form factor makes it suitable for confined jigs where precise reference points are required. The M323.J54 is especially useful where stable, repeatable mechanical references are needed to validate mating parts or tooling registers. For dependable workshop measurement, specify the Metav IndustryLine M323.J54 through Metav Werkzeuge and secure consistent inspection performance from delivery to the shop floor Technical data Article number: M323.J54 GTIN: 4061905072697 Category: Gauge pins ECLASS: 21170231 Measured values Diameter: 19.54 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Materials and features Material: Special steel Workshop execution Supplied in protective transport case Suitable for end‑measure checks FAQ What is the stated dimensional tolerance of the gauge pin? The product is specified with a dimensional tolerance of ±0.002 mm for the 19.54 mm diameter. Which material is used for this gauge pin? The component is made from special steel, providing wear resistance and dimensional stability suited to workshop use. How is the test pin delivered and protected? Delivery includes a protective transport case, which preserves the measuring surfaces during storage and transport. Is this gauge pin intended for end‑measure checks or fixture testing? Yes, the component is designed specifically for end‑measure checks and fit verification in workshop and inspection setups, making it suitable for fixture testing and mating part validation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.55mm Gauge Pin, 50mm Length Workshop Version, Special Steel, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of precision with a diameter of 19.55 mm, robust special steel construction and a compact 50 mm length for reliable end‑measure checks and fixture verification; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.J55 — 19.55 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin 19.55 mm, 50 mm length is a single precision end‑measure pin for dimensional inspection, plug gauges and fit tests in machine shops and inspection benches. Precision diameter 19.55 mm 50 mm length for deeper fits Special steel construction Workshop‑grade execution Improved inspection accuracy and repeatability The compact design delivers consistent repeatability for routine dimensional checks. With a nominal diameter of 19.55 mm and a tight manufacturing tolerance of ±0.002 mm, this gauge pin enables clear go/no‑go decisions and reduces the need for rework. The controlled tolerance supports faster throughput in inspection sequences and simplifies the documentation of measurement outcomes, making this an efficient tool for shop‑floor quality assurance. Robust build for regular workshop use Made from special steel, the pin resists wear and maintains its geometry under frequent handling. The 50 mm length offers enough reach for many fixture and bore checks while remaining easy to position in jigs and test benches. The workshop‑grade execution balances durability and handling convenience, helping to extend service life and lower replacement intervals in a production environment. Easy integration into measurement workflows Marked with SKU M323.J55, this single gauge pin fits standard gauge sets and measuring fixtures; it is suitable for end‑measurement tasks and plug‑fit verification on assembled components. The straightforward specification simplifies procurement and traceability within inventory systems. Metav IndustryLine supports a broad offering of complementary gauges and accessories to build tailor‑made inspection setups, enhancing efficiency across small batch and serial production. Contact Metav Werkzeuge for technical compatibility checks on the Metav IndustryLine 19.55 mm gauge pin M323.J55 or to arrange supply from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.J55 GTIN: 4061905072703 Brand: Metav IndustryLine Material: Special steel Item label: Gauge pin, single, 19.55 mm Ø, 50 mm length Numbers / Core technical data Diameter: 19.55 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.2 kg Special features / Versions Workshop‑grade execution Single item supply Suitable for end‑measurement and plug‑fit checks Compact geometry for easy handling and fixture use FAQ What is the exact diameter and tolerance of this gauge pin? The gauge pin has a nominal diameter of 19.55 mm with a manufacturing tolerance of ±0.002 mm, specified for the Metav IndustryLine item M323.J55. Which material is used for the pin and what does that mean for wear? The pin is made from special steel; this provides improved resistance to wear and dimensional stability under regular inspection use. For which applications is this pin intended? This single gauge pin is intended for end‑measure checks, plug‑fit testing and fixture verification on machine‑made components where a 19.55 mm reference is required. How is the pin identified for ordering and inventory? The product is supplied as Metav IndustryLine SKU M323.J55 and can be ordered using the GTIN 4061905072703 for precise stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.56mm Gauge Pin, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, tight dimensional accuracy and practical transport packaging for reliable end-dimension checks in production and inspection environments. Order the single gauge pin directly via Metav Werkzeuge or request specialist advice from our consultants. Gauge pin M323.J56 – single test pin, Ø 19.56 mm, length 50 mm (Metav IndustryLine) The gauge pin M323.J56 is a single, hardened test pin designed for precise end-dimension verification and repeatable fit checks in workshop and inspection tasks. Single gauge pin, Ø 19.56 mm, length 50 mm Workshop version with hardened special steel Dimensional accuracy ±0.002 mm Delivered in protective transport case Accurate measurements that reduce rework The M323.J56 serves as a simple, reliable reference for end‑dimension and fit verifications; with a diameter of 19.56 mm and a dimensional tolerance of ±0.002 mm, it supports consistent, repeatable checks that reduce scrap and rework. As a single‑piece test pin, it provides a straightforward measure for go/no‑go seating, bore checking and assembly trials. The high nominal accuracy gives confidence when verifying critical mating parts and end fits where deviations of a few micrometres matter. Built for workshop environments and frequent handling Manufactured from special steel and specified as a workshop version, this test pin tolerates the mechanical stresses of daily use while retaining dimensional integrity. The compact 50 mm length makes handling agile during inspection routines, and the robust surface resists premature wear. Supplied individually and protected in a transport case, the pin remains secure in transit and storage, limiting the risk of nicks that could affect measurement reliability. Practical integration into quality workflows As a plain single gauge pin, the item integrates seamlessly into existing inspection benches, fixture checks and assembly jigs without special adapters. The lightweight 0.2 kg mass eases handling and the simple geometry allows visual and tactile assessment alongside dimensional checks. For documentation and traceability, the article is identified by its SKU and GTIN, enabling clear inventory management and process control across production and inspection systems. Contact Metav Werkzeuge in Emmerich for availability or a technical consultation on the M323.J56 gauge pin — Metav Werkzeuge can advise on suitability for specific inspection tasks and ensure fast supply from the European stock in Emmerich, info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M323.J56 GTIN: 4061905449598 SKU: M323.J56 Facts Diameter: 19.56 mm Length: 50 mm Weight: 0.2 kg Accuracy: ±0.002 mm Special features Material: special steel Version: workshop execution Delivery: protective transport case included Item type: single gauge pin FAQ What materials is this gauge pin made from? The gauge pin M323.J56 is made from special steel, specified as a workshop execution to withstand regular inspection use. What tolerance can be expected from this test pin? Dimensional tolerance for the M323.J56 is ±0.002 mm, providing a high degree of repeatability for end‑dimension checks. Is the pin supplied individually or in a set? This product is supplied as a single gauge pin (single item), delivered in a protective transport case for safe handling and storage. Which applications are suitable for this gauge pin? The M323.J56 is suitable for end‑dimension verification, bore fit checks and assembly trials where a precise reference pin is required. How should the gauge pin be stored to preserve accuracy? Store the M323.J56 in its protective case, keep it clean and dry, and avoid impacts or nicks that could alter the measurement surface Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.57mm Test Pin Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of the combination of industrial accuracy, robust material and compact form factor for reliable fit and end‑measure checks; order or request supply details from Metav Werkzeuge for seamless integration into workshop quality control. Gauge pin, single, 19.57 mm — 50 mm length (Metav IndustryLine) The gauge pin, single, 19.57 mm is a workshop‑grade precision reference for end‑measure checks and fit testing in small to medium assemblies. High precision ±0.002 mm tolerance 50 mm length for consistent insertion depth Special steel for wear resistance Workshop version designed for regular use Precision that reduces rework and inspection time This compact reference pin delivers high repeatability in fit and clearance tests thanks to its tight ±0.002 mm tolerance. In practical terms, the reduced measurement scatter shortens inspection cycles and lowers the frequency of rework on mating components. For production and assembly environments where small deviations cause rejects, the reliable dimensional stability of this reference pin supports faster decision making and consistent part acceptance. Robust material and form for everyday workshop use Manufactured from special steel, the component resists surface wear and maintains geometric integrity under regular handling. The 50 mm overall length provides a stable insertion depth while the 19.57 mm diameter offers a precise mating datum for plug and bore checks. The workshop specification means the design tolerates frequent manual use and sustained contact with gauging fixtures, making it suitable for bench tests and quality control stations alike. Small‑format gauge for high‑precision tasks Classified in the micro range (10–100 mm), this reference pin combines compactness with professional‑grade accuracy, ideal for end‑measure verification and fit testing of housings, sleeves and small bores. The compact size reduces bending moment during insertion, preserving measurement integrity and improving operator handling. Where space is limited but tolerance requirements are strict, this precision pin provides an effective balance between reach and stiffness. Contact Metav Werkzeuge for procurement advice, availability and integration support for the Metav IndustryLine gauge pin M323.J57; our team in Emmerich advises on matching gauges to measurement tasks and supply across Europe Technical data SKU: M323.J57 GTIN: 4061905449604 Article: Gauge pin, single, 19.57 mm, length 50 mm EClass: 21170231 Dimensions & tolerances Diameter: 19.57 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Materials & features Material: Special steel Designation: Workshop version Category: Gauge pins (Messstifte) Application: End‑measure checks; fit testing FAQ What is the primary use of this gauge pin? The gauge pin M323.J57 is intended as a precision reference for end‑measure verification and fit testing in workshop and production quality control. How accurate is the gauge pin for go/no‑go checks? Accuracy is specified as ±0.002 mm, which makes the pin suitable for fine tolerance checks and reduces measurement uncertainty during inspection. Which materials is the pin suitable for testing against? The pin is made from special steel and is designed to be used as a reference when checking bores, sleeves and mating parts made from typical engineering materials. Is the M323.J57 intended for continuous use in a production environment? Yes, the workshop version is built for regular handling and repeated insertions typical in bench and production inspection tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.58mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high repeatability and robust workshop construction: the combination of a 19.58 mm calibrated diameter, ±0.002 mm accuracy and wear‑resistant special steel ensures reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Single gauge pin M323.J58 — 19.58 mm diameter, 50 mm length (Metav IndustryLine) The single gauge pin 19.58 mm, 50 mm length serves as a compact inspection pin for precise bore and end‑dimension verification in workshop metrology. Workshop-grade construction Diameter 19.58 mm, length 50 mm Accuracy ±0.002 mm Special steel for wear resistance Supplied in protective case Precision where it matters: reliable dimensional checks The compact inspection pin is designed for repeatable dimensional control in production and assembly tasks. With a certified diameter of 19.58 mm and an indicated accuracy of ±0.002 mm, the pin supports fine tolerance verification that reduces rework and streamlines quality control. The cylindrical geometry provides a clear reference for end‑measure and bore checks, converting a simple tactile procedure into a verifiable measurement step that integrates easily into existing inspection routines. Built for the workshop: handling, longevity and classification Classified in the micro measuring range (suitable for devices with maximum measuring spans between 10 and 100 mm), this inspection pin matches the requirements of precision workshop environments and small‑part manufacturing. The special steel composition combines hardness with surface stability to resist wear over repeated use, while a mass of 0.2 kg gives a stable feel in hand. The workshop‑oriented design balances durability with ease of handling, ensuring that routine checks remain efficient without sacrificing measurement integrity. Practical benefits in daily use: protection, traceability and compatibility Delivered as a single item in a protective case for safe transport and storage, the pin remains ready for immediate use at the workbench. The 50 mm usable length permits straightforward engagement in recessed bores or end‑face checks, and the nominal dimensions allow compatibility with standard inspection jigs and fixtures. Where documented accuracy is required, the fine tolerance mark of ±0.002 mm provides a reliable basis for pass/fail assessments and supports consistent process decisions across production batches. For workshop‑ready precision with Metav IndustryLine, contact Metav Werkzeuge for tailored advice and secure the M323.J58 gauge pin to strengthen quality checks on critical components. Technical data Article number: M323.J58 GTIN: 4061905449611 Manufacturer: Metav IndustryLine Label: Single gauge pin, 19.58 mm, length 50 mm Facts Diameter: 19.58 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg Special features Material: Special steel Version: Workshop execution Packaging: Protective case for transport Supplied as single piece FAQ What is the primary use of this gauge pin? The gauge pin M323.J58 is intended for precise bore and end‑dimension checks in workshop metrology and small‑part inspection. Is the material suitable for repeated use in production environments? Yes, the pin is made from special steel, chosen for wear resistance and stability under regular inspection cycles. How does the stated accuracy affect inspection decisions? An accuracy of ±0.002 mm provides a reliable basis for pass/fail checks and helps reduce uncertainty in dimensional control processes. Can the pin be used with standard inspection fixtures? The nominal diameter and 50 mm length make the pin compatible with common jigs and fixtures for bore and end‑measure verification. Is the item supplied ready for transport and storage? The gauge pin is supplied as a single piece in a protective case, facilitating safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.59mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm accuracy, a precise 19.59 mm diameter and a compact 50 mm length for reliable reference measurements; order the M323.J59 gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.J59 Gauge Pin — 19.59 mm diameter, 50 mm length (Metav IndustryLine) The M323.J59 gauge pin is a single, workshop-grade precision reference pin intended for end‑measure checks, fixture verification and go/no‑go testing in inspection routines. Workshop-grade execution Diameter 19.59 mm precision Length 50 mm stability Tolerance ±0.002 mm accuracy Reliable reference for end‑measure checks A compact, hardened reference pin offers a reproducible datum for routine inspection tasks. With a nominal diameter of 19.59 mm and a certified ±0.002 mm tolerance, this precision element reduces measurement uncertainty when used as a reference in comparator fixtures or pin gauges. The narrow dimensional tolerance translates into consistent pass/fail decisions on production lines and in quality control stations, improving throughput by lowering the rate of repeat measurements and rework. The core advantage is repeatability: a stable reference diameter means fewer deviations between operators and instruments, which is essential for maintaining statistical process control. Robust material and workshop readiness Manufactured from special steel, the pin combines wear resistance with dimensional stability under normal workshop conditions. The material choice ensures longevity in contact applications and maintains roundness and surface finish across extended inspection cycles. The 50 mm nominal length provides sufficient engagement for most test setups while keeping weight and handling simple. This balance of hardness and manageable mass makes the component suitable for fixture use and for integration into modular inspection plates where durable, compact references are required. Practical integration into inspection workflows As a single gauge element, the pin is straightforward to handle and store in toolbox systems or inspection kits. Its nominal size and tight tolerance support use as a master for micromachining checks, end‑measure verification and assembly jigs. Where instrument resolution and operator technique can influence results, a well characterised reference pin helps to isolate variables and validate the measurement chain. The compact design also makes it easy to replace within pinned fixtures without recalibrating the entire system, saving downtime and simplifying maintenance routines. For robust inspection references and pragmatic advice on fixture integration, contact Metav Werkzeuge to request the Metav IndustryLine M323.J59 gauge pin with 19.59 mm diameter and ±0.002 mm specification — Metav Werkzeuge’s team in Emmerich will support selection and delivery. Technical data Article number: M323.J59 GTIN: 4061905449628 Category: Gauge pins Facts Diameter: 19.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Material: Special steel Single gauge pin, workshop version eClass: 21170231 SKU: M323.J59 FAQ What applications is this gauge pin suited for? This gauge pin from Metav IndustryLine is intended for end‑measure checks, fixture verification and go/no‑go testing where a 19.59 mm reference is required. How accurate is the M323.J59 gauge pin? The M323.J59 gauge pin is manufactured to a tolerance of ±0.002 mm, providing a high‑precision reference for reproducible inspection results. What material is used and how does it affect durability? Made from special steel, the pin offers good wear resistance and dimensional stability suitable for frequent contact in workshop and inspection environments. Can the pin be used in assembly jigs and fixtures? Yes, the 50 mm length and compact form factor make the pin suitable for integration into pinned fixtures and modular inspection plates. Is the product supplied as a single item or in sets? The item is supplied as a single gauge pin under the SKU M323.J59 for flexible use in bespoke inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.5mm Test Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability (±0.002 mm), a compact 50 mm length and workshop-grade construction to speed up end‑dimension checks and reduce rework. Order the component directly via Metav Werkzeuge or contact our consultants for specification support. Test Pin M323.J50 — Gauge Pin Ø 19.5 mm, 50 mm Length (Metav IndustryLine) The Test Pin M323.J50 is a workshop‑grade gauge pin designed for precise end‑dimension verification and fixture alignment in production and inspection environments. Workshop-grade construction Nominal Ø 19.50 mm Length 50 mm for compact set-ups Dimensional tolerance ±0.002 mm Precision that shortens inspection cycles The gauge pin delivers industrial-grade accuracy (±0.002 mm), which translates into reproducible end‑dimension checks and fewer measurement iterations. With a nominal diameter of 19.50 mm, the component is suited to fine adjustment tasks where repeatability matters; the stated tolerance indicates the maximum permissible deviation during routine verification. Using a dedicated gauge pin with defined limits reduces ambiguous fits and helps keep downstream assembly and machining processes within specification, improving throughput and lowering the risk of scrap. Robust construction for everyday workshop use Manufactured from special steel and specified as a workshop‑grade item, the pin offers resistance to wear in frequent handling and insertion cycles. The 50 mm length provides a compact profile that remains stiff in handheld use and fits common fixtures and test benches without overhang. The modest mass (0.2 kg) and solid feel aid stable positioning during alignment tasks. The material choice and execution ensure the pin holds its dimensional integrity under standard shop conditions, making it a reliable tool for routine inspection tasks and fixture set‑up. Integrates easily into measurement routines and tooling As a single‑piece gauge pin, this item is intended for fast insertion checks, reference probing and end‑dimension gauging in jigs and gauges. The simple geometry facilitates quick comparison against bores and mating parts; paired with Go/No‑Go assemblies or comparator setups it supports efficient pass/fail decisions. The compact design also eases storage and transport between workstations. For production environments where consistent checking is required, the pin helps standardise procedures and shorten decision loops, enabling teams to maintain quality without adding complexity. For dependable inspection tooling, specify the Metav IndustryLine Test Pin (M323.J50) — contact Metav Werkzeuge in Emmerich for technical advice and swift supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.J50 GTIN: 4061905072659 Category: Messstifte Facts Diameter: 19.5 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Workshop execution Material: Special steel Single item delivery Nominal measuring diameter specified FAQ What is the nominal diameter and tolerance of this test pin? The Test Pin M323.J50 has a nominal diameter of 19.50 mm and a dimensional tolerance of ±0.002 mm. Is the item supplied as a single piece or in sets? The Metav IndustryLine product M323.J50 is supplied as a single test pin for individual use in inspection and fixture applications. What material is the test pin made from? The gauge pin is made from special steel, specified for workshop durability and dimensional stability. For which tasks is this gauge pin most suitable? This 50 mm gauge pin is intended for end‑dimension verification, fixture alignment and quick insertion checks in production and inspection contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.61mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from workshop‑grade robustness and tight dimensional control — the pin's 19.61 mm nominal diameter and ±0.002 mm tolerance support repeatable end‑measure checks while the special steel construction ensures long service life; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 19.61 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 19.61 mm, length 50 mm is a workshop‑grade test pin for precise end‑dimension verification and fit inspections in assembly and quality control environments Workshop-grade special steel construction Diameter precisely 19.61 mm Measurement accuracy ±0.002 mm Supplied in protective transport case Precision that reduces rejects and rework Designed for repeatable end‑measure checks, this single test pin provides a defined nominal diameter of 19.61 mm with a verified tolerance of ±0.002 mm. Such close control permits reliable fit and clearance assessments where micrometre‑level deviations affect assembly performance. The compact, rigid profile and 50 mm length reduce positional variation during insertion, thereby lowering the likelihood of false rejects and helping streamline inspection throughput. Built to withstand workshop use The workshop version construction uses special steel for mechanical durability and dimensional stability under repeated use. Surfaces are finished to preserve geometry over many cycles; this supports consistent gauge behaviour and predictable wear characteristics. Delivery in a protective case preserves the pin's measuring surface during transport and storage, preventing handling damage that would otherwise compromise inspection accuracy. Simple integration into inspection routines Marked for traceability and compact to handle, the item integrates easily into standard quality procedures and bench setups. As an individual test pin intended for end‑measure tasks, it reduces set‑up time for go/no‑go checks and simplifies documentation of inspection results thanks to clear identifiers. The modest mass aids handling while maintaining the stiffness necessary for reproducible measurements across repeated cycles. For personalised advice or to secure the M323.J61 gauge pin with workshop‑grade special steel and ±0.002 mm tolerance, contact Metav Werkzeuge for fast dispatch from Emmerich and expert application guidance Technical data SKU: M323.J61 GTIN: 4061905449550 Material: Special steel Diameter: 19.61 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg eClass: 21170231 Facts Diameter 19.61 mm Tolerance ±0.002 mm Length 50 mm Weight 0.2 kg GTIN 4061905449550 Special features Workshop version Supplied in protective transport case Single test pin for end‑measure checks Individual delivery FAQ What tolerance does this gauge pin provide? The M323.J61 gauge pin has a nominal diameter of 19.61 mm and a tolerance of ±0.002 mm, making it suitable for high‑precision fit and clearance checks. Is this pin intended for end‑measure inspections? Yes. The pin is designed specifically for end‑dimension verification and repeatable fit testing in workshop and assembly contexts. What material is the pin made from? The test pin is manufactured from special steel, selected for its wear resistance and dimensional stability in workshop applications. How is the pin supplied and protected? The pin is supplied as a single unit and delivered in a protective transport case to prevent surface damage during handling and transport. Is the item suitable for regular workshop use? Yes. The workshop‑grade construction and finish are intended for repeated insertions and routine inspection use, supporting long‑term dimensional reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.62mm Gauge Pin Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of a workshop‑grade gauge that pairs high repeatability with compact dimensions and robust handling; the 19.62 mm nominal diameter and ±0.002 mm accuracy deliver dependable end‑measure checks, while delivery in a transport case protects the tool in daily use. Order the test pin directly via Metav Werkzeuge or ask the consultants for application support. Test pin M323.J62 — gauge pin, 19.62 mm nominal diameter, 50 mm length (Metav IndustryLine) The test pin M323.J62 is a workshop‑grade gauge designed for reliable end‑measure verification and fit checks in metalworking and inspection routines. Workshop-grade design for shop-floor use Nominal diameter 19.62 mm for end‑measure checks High accuracy ±0.002 mm 50 mm overall length for insertion and reach Precision that stabilises production flow The core benefit of this gauge pin is dimensional certainty: with a nominal diameter of 19.62 mm and a stated tolerance of ±0.002 mm, the pin provides tight reproducibility for end‑measure and assembly checks. In practical terms, this level of precision reduces guesswork during set‑up and inspection, so evidence‑based decisions about rework or acceptance can be taken faster. The accuracy figure references the manufacturing tolerance of the part itself; when combined with standard measuring fixtures, it supports consistent pass/fail evaluation and reduces measurement scatter across repeated checks. Designed for everyday workshop use Built as a workshop‑grade item, the measuring pin balances wear resistance and handling convenience. The body is made from special steel, chosen for its dimensional stability and resistance to surface damage under regular use; this helps keep the gauge within tolerance over many cycles. The 50 mm overall length gives sufficient reach for most end‑measure and fit tasks while keeping the part compact for jig insertion and toolboxes. Delivery in a case for transport protects the surface finish during storage and transit, ensuring the pinned diameter remains unmarked and ready for immediate use on the shop floor. Integrates with inspection routines and reduces downtime As a single, dedicated gauge pin, this tool speeds up routine checks and complements fixed gauging systems or manual inspection benches. The compact mass (approx. 0.2 kg) facilitates quick handling and position changes during batch checks, shortening cycle time without compromising on measurement quality. Metav IndustryLine sourcing ensures consistent stocking and traceability, which supports predictable procurement and replacement planning. For workshops that prioritise throughput and repeatable quality, this precision pin helps avoid disruptive guesswork and keeps inspection steps lean and auditable. Contact Metav Werkzeuge for availability, packing options and practical advice on fitting the Metav IndustryLine test pin M323.J62 into existing inspection processes Technical Data Article number: M323.J62 GTIN: 4061905449567 Manufacturer: Metav IndustryLine Category: Gauge pins Facts Nominal diameter: 19.62 mm Length: 50 mm Weight: 0.2 kg Accuracy: ±0.002 mm eCl@ss: 21170231 Special features Material: Special steel Workshop execution Delivered in a plastic or wooden case for transport Single test pin for end‑measure and fit checks FAQ What tolerance can be expected from the gauge pin? The Metav IndustryLine test pin M323.J62 is manufactured to a tolerance of ±0.002 mm, providing tight reproducibility for end‑measure and fit verification. Is the pin suitable for routine shop‑floor use? Yes, the workshop‑grade design and special steel construction make the gauge pin well suited to regular inspection tasks and handling in a production environment. How is the pin delivered to protect the measuring surface? The test pin is supplied in a transport case (plastic or wooden where applicable) to prevent damage to the diameter and surface finish during storage and transit. Can the pin be used for assembly fit checks as well as end‑measure testing? Yes, the pin’s 50 mm overall length and precise diameter make it suitable for both end‑measure checks and straightforward fit verification in assemblies. What identification is available for traceability? The product is supplied as Metav IndustryLine item M323.J62 with GTIN 4061905449567 for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.63mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version, Case - Metav IndustryLine
Combining workshop-grade construction with a 19.63 mm diameter and a tight ±0.002 mm tolerance, this gauge pin provides dependable end‑size verification and repeatable results for day‑to‑day inspection tasks. Order the pin directly via Metav Werkzeuge or consult our specialists for application support. Gauge pin M323.J63 — Gauge pin for end‑size verification, 19.63 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.J63 is a precision reference pin designed for reliable end‑size checks and routine inspection work in workshops and small production lines. Its workshop specification and compact format make it suitable for repeatable dimensional control where stable, high‑accuracy reference points are required. Precision tolerance ±0.002 mm Diameter 19.63 mm, length 50 mm Workshop version delivered in protective case Consistent end‑size verification for production control A compact test pin with a ±0.002 mm tolerance delivers measurable improvement in repeatability when used as an end‑size reference. The tight runout specification reduces measurement scatter during repeated fits, which means fewer false rejects and more reliable process control. Built to be a stable datum, the pin supports quick comparative checks and pass/fail gauges, turning a single reference into a robust quality gate. Durable design that reduces downtime Manufactured from special steel, the component combines surface hardness with dimensional stability to withstand frequent seating and removal. The 50 mm length gives adequate engagement for handheld and jig-mounted checks while remaining easy to handle. Supplied in a protective case, the pin is protected during transport and storage, lowering the risk of nicks or contamination that can compromise accuracy and require rework. Integration into the workshop workflow Marked with a clear SKU and traceable identification, this gauge pin fits seamlessly into inspection routines, fixture setups and master‑plug arrays. Its straightforward geometry simplifies gauging tasks and supports fast decision cycles on the shop floor. If uncertainty remains about a specific application, Metav’s technical advisors can provide guidance on how this reference pin can be integrated into an existing measuring procedure or gauge set. For tailored advice or to obtain the Metav IndustryLine gauge pin M323.J63 directly, contact Metav Werkzeuge for expert assistance and order processing Technical Data SKU: M323.J63 GTIN: 4061905449574 Material: Special steel Weight: 0.2 kg Length: 50 mm Diameter: 19.63 mm Tolerance: ±0.002 mm Category: Gauge pins Facts Diameter: 19.63 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Workshop version Delivered in protective case Intended use: end‑size verification FAQ What tolerance does the gauge pin offer? The gauge pin M323.J63 is specified to a tolerance of ±0.002 mm, suitable for tight end‑size verification and repeatable workshop checks. Which material is the pin made from? The component is made from special steel, chosen for wear resistance and dimensional stability under regular use. Is the pin supplied ready for storage and transport? Yes, the gauge pin is supplied in a protective case to prevent damage during transport and storage. Can the pin be used in jig and fixture applications? The M323.J63 gauge pin is suitable for incorporation into simple fixtures and master gauge arrays for comparative measurement tasks. How does the pin help with process reliability? With its precision tolerance and stable geometry, the pin reduces measurement variability and supports consistent pass/fail decisions on the production line. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.64mm Gauge Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
This workshop‑grade gauge pin combines high dimensional accuracy (±0.002 mm) with a compact 50 mm length and a nominal diameter of 19.64 mm to secure repeatable end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for matched sets and application advice. Gauge pin, single — 19.64 mm nominal, 50 mm length (Metav IndustryLine) A gauge pin for precise end‑measurement and inspection tasks in workshops and quality control stations, supplied as a single unit in a protective transport box. Workshop‑grade construction, robust finish Exact diameter 19.64 mm with ±0.002 mm tolerance 50 mm length for bore and end‑dimension checks Made from special steel for wear resistance Repeatable accuracy for end‑dimension control The gauge pin is engineered for consistent, reproducible measurements in inspection and assembly workflows. With a nominal diameter of 19.64 mm and a verified dimensional tolerance of ±0.002 mm, the pin is suitable for tasks where tight limits on end dimensions are required. The compact design reduces the potential for flex or misalignment during insertion, which improves measurement reliability and speeds up routine checks — a clear efficiency gain for production and incoming inspection processes. Built for everyday workshop handling Designed as a workshop version, the unit offers robust handling characteristics while keeping handling simple. The 50 mm length provides sufficient reach for most bore and recess checks without adding unnecessary bulk, and the use of special steel gives improved wear resistance under repeated contact conditions. These material and design choices result in a tool that sustains accuracy over many cycles, lowering the need for frequent replacement and supporting uninterrupted production. Practical integration into metrology routines Supplied as a single gauge pin, the component suits a range of inspection tasks from final dimension checks to layout control. The compact geometry makes it easy to store and to use in fixture‑based inspections. When grouped into matched sets, similar pins establish a rapid go/no‑go workflow; alternatively, the single unit is ideal for spot checks and verification of end measurements. Traceability is supported by the printed GTIN and the clear identification on the part for inventory and quality records. Discuss custom sets and application recommendations with Metav Werkzeuge — our Emmerich team advises on matching pins, fit tolerances and inspection workflows to help integrate this gauge pin into the existing quality process. Technical data Article number: M323.J64 GTIN: 4061905449581 Category: Messstifte Material: Special steel Nominal diameter: 19.64 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Packaging: Delivered in protective transport box Facts Diameter: 19.64 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg GTIN: 4061905449581 Special features Workshop version Single unit (individual pin) Material: Special steel for wear resistance Delivery in protective box for transport FAQ What is the main application for this gauge pin? The gauge pin M323.J64 is intended for end‑dimension checks, bore verification and spot inspection tasks in workshop and inspection environments. Is the pin suitable for repeated use in production inspections? Yes, the special steel construction of the Metav IndustryLine gauge pin provides wear resistance compatible with frequent use in production inspection cycles. Does the gauge pin come ready for delivery in protective packaging? The pin is supplied as a single unit and is delivered in a protective transport box to safeguard the gauge during handling and transit. Can the pin be used as part of a matched set for go/no‑go checks? The single gauge pin can be ordered alongside other sizes to form matched sets; Metav IndustryLine offers advice for assembling sets that meet specific inspection tolerances. What identification is provided for traceability? The M323.J64 unit includes GTIN 4061905449581 for inventory and traceability within quality documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.65mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Combine workshop‑grade robustness with a 19.65 mm precision diameter and a tight ±0.002 mm tolerance to ensure reproducible end‑dimension checks; the inspection pin arrives in a protective case and can be ordered directly via Metav Werkzeuge or discussed with our consultants. Test pin, single — diameter 19.65 mm, length 50 mm — Metav IndustryLine The Test pin, single, diameter 19.65 mm, length 50 mm is a workshop‑grade inspection pin designed for reliable end‑dimension verification in fixtures, gauges and assembly checks. Workshop‑grade construction Precision diameter 19.65 mm Tight tolerance ±0.002 mm Supplied in protective case Reliable verification for end‑dimension control The inspection pin provides consistent dimensional reference for end‑measurements in repetitive testing and fixture validation. With a nominal diameter of 19.65 mm and a verified tolerance of ±0.002 mm, the probe delivers the kind of repeatability required when small deviations affect assembly fit or function. That level of accuracy reduces rework and speeds up acceptance decisions during quality checks, making the component a practical choice for production environments where measurable process reliability is essential. Built to withstand workshop conditions Designed as a workshop‑grade item, the probe combines robustness with low handling weight (0.2 kg), allowing quick positioning in jigs and gauges without adding undue mass to the setup. The body is made from special steel, providing wear resistance under frequent contact and ensuring dimensional integrity over prolonged use. Supplied in a protective case, the pin is protected during storage and transport, which preserves its measuring surface and delivers better long‑term value for routine inspection tasks. Simple integration into inspection routines The compact geometry — 50 mm length and the standardised diameter — enables straightforward incorporation into existing test rigs, end‑of‑line checks and go/no‑go arrangements. The inspection element can act as a fixed reference or a replaceable probe in modular fixtures, reducing downtime for maintenance. Clear, numeric specifications aid planning: the probe’s tolerance and size are immediately usable for fixture design and tolerance analysis, supporting faster commissioning and consistent inspection outcomes. Suitable applications and practical benefits This inspection pin is appropriate for end‑dimension checks, locating features and repeatable gauge points in metalworking and component assembly. As a precision reference, it complements other metrology tools to close measurement loops: stable reference points make comparative tests more meaningful and accelerate decision‑making. The combination of precision and workshop durability therefore supports both daily production inspection and occasional higher‑precision checks without needing specialist handling. For dependable end‑dimension checks, order the Metav IndustryLine test pin via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com for application guidance and delivery details. Technical data Article number: M323.J65 GTIN: 4061905449642 SKU: M323.J65 Material: Special steel Weight: 0.2 kg Length: 50 mm Diameter: 19.65 mm Tolerance: ±0.002 mm Facts Diameter: 19.65 mm Length: 50 mm Weight: 0.2 kg Tolerance: ±0.002 mm Special features Workshop version Supplied in protective case Category: Test pins ECLASS: 21170231 Application: end‑dimension checks FAQ What is the intended use of this inspection pin? The inspection pin is designed for end‑dimension verification and locating tasks in fixtures and gauges; the Metav IndustryLine test pin M323.J65 serves as a precision reference point in production and inspection setups. How precise is the diameter of the pin? The pin has a nominal diameter of 19.65 mm with a tolerance of ±0.002 mm, making it suitable for tight tolerance checks and repeatable fixture applications. What material is the pin made from and how does that affect durability? Manufactured from special steel, the pin offers enhanced wear resistance and dimensional stability under frequent contact, supporting long service life in workshop conditions. Is the pin supplied ready for use and how is it packaged? The inspection pin is supplied in a protective case to preserve the measuring surface during storage and transport, facilitating ready‑use in inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.66mm Gauge Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Robust repeatability and compact dimensions make the Metav IndustryLine gauge pin an efficient choice for end‑size inspection; its ±0.002 mm tolerance together with a nominal 19.66 mm diameter and 50 mm length ensure reliable in‑process checks and simple fixture integration. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application support. Gauge pin M323.J66 — Precision inspection pin, Ø 19.66 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.J66 is a precision inspection pin designed for end‑size verification and go/no‑go checks in workshop and production environments, offering robust performance for routine measurement tasks. Workshop version for rugged daily use Nominal diameter 19.66 mm for end‑size checks 50 mm overall length for deep recess measurements Tolerance ±0.002 mm for high repeatability Reliable metrology for production control The compact inspection pin delivers a measured balance of stiffness and accessibility that supports repeatable quality checks on small to medium parts. With a declared tolerance of ±0.002 mm, the component provides the level of precision expected in final‑dimension verification, reducing the need for rework and lowering scrap rates. The specified 19.66 mm nominal diameter is intended for end‑size testing in assembly and finishing operations where clear go/no‑go decisions are required. Built for workshop durability and low maintenance Constructed from special steel, the pin is optimised for frequent handling and contact in demanding workshop settings. The workshop version designation indicates reinforced surface integrity and dimensional stability under routine use, which translates into longer service life and fewer replacements. Maintenance is straightforward due to the simple geometry; regular cleaning and visual inspection are normally sufficient to preserve measurement quality. Practical form factor that fits fixtures and jigs An overall length of 50 mm offers sufficient engagement for measurements in recessed bores and assemblies while remaining easy to mount in control fixtures. The compact dimensions support efficient handling and short setup times at inspection stations, enabling fast throughput during batch checks. Owing to its modest mass, the pin integrates well with manual gauges and automated fixtures where stable seating and repeatable contact are required. Traceability and integration into measurement routines The gauge pin is supplied as an individual item with a clear product identity for procurement and inventory control (SKU: M323.J66, GTIN: 4061905449659). Its simple specification facilitates incorporation into existing inspection protocols and fixture designs without additional adaptation, making it a practical choice for workshops and small production lines that require dependable end‑size validation. For reliable end‑size inspection and workshop use, choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge in Emmerich for tailored procurement advice or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.J66 GTIN: 4061905449659 SKU: M323.J66 ECLASS: 21170231 Facts Nominal diameter: 19.66 mm Overall length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Workshop version Material: special steel Single item delivery Category: gauge pins FAQ How precise is the gauge pin for routine checks? The gauge pin M323.J66 is specified with a tolerance of ±0.002 mm, making it suitable for high‑repeatability end‑size inspections in production and workshop settings. Can the pin be mounted in standard inspection fixtures? Yes. The M323.J66 inspection pin’s 50 mm length and compact geometry are compatible with common fixture designs for go/no‑go and end‑size verification. What material is the pin made from and what does this mean for wear? The pin is made from special steel; this material choice enhances wear resistance for workshop use and extends service life under frequent contact. Is the product supplied as a single item or in sets? The item is supplied individually under SKU M323.J66 and GTIN 4061905449659 for straightforward inventory and ordering. Which applications are typical for this gauge pin? Typical uses include end‑size inspection, go/no‑go testing and comparative checks on assembled parts where a 19.66 mm nominal diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.67mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, a precise 19.67 mm diameter and workshop-grade robustness for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants for matching sets and storage options. M323.J67 Gauge pin – 19.67 mm diameter, 50 mm length (Metav IndustryLine) The M323.J67 gauge pin is a workshop-grade measuring pin designed for fast and reliable end‑dimension controls in production and inspection tasks. Precision diameter 19.67 mm Tolerance ±0.002 mm for tight checks Special steel, workshop execution Supplied in protective transport case Repeatable checks for end‑dimension control A compact measuring solution, the M323.J67 delivers consistent performance where repeatability matters. With a nominal diameter of 19.67 mm and a verified tolerance of ±0.002 mm, the pin supports tight go/no‑go and reference measurements that reduce uncertain fits and costly rework. The special steel construction provides dimensional stability under routine handling and resists rapid wear, so the pin remains a reliable reference over many inspection cycles. Emphasising measurable performance, this tool is suitable for use in batch control, final inspection and assembly validation where clear, numerical criteria are required. Built for workshop use and safe handling Designed as a workshop‑grade instrument, the pin combines a practical 50 mm overall length with a low mass (0.2 kg) for easy placement and removal from fixtures. The format supports swift insertion into bores and reference holes while maintaining adequate contact area for stable measurement. Delivery in a protective transport case ensures safe storage and reduces the risk of accidental damage during transfer between production and QC benches. These handling advantages help maintain calibration intervals longer and simplify daily inspection routines without compromising accuracy. How this pin improves measurement routines Integrating this gauge pin into standard checks streamlines processes by supplying a definite reference for end‑dimension verification and assisted assembly checks. The robust geometry minimises wobble and provides predictable seating in mating features, improving repeatability and inspection throughput. Identifiable by GTIN: 4061905449666 and classification in the gauge‑pin category, the item fits into existing pin sets and fixtures and supports measured decision‑making in quality workflows. The combination of a precise diameter, narrow tolerance and practical packaging makes this pin a pragmatic choice for production environments prioritising measurable outcomes. Contact Metav Werkzeuge today to request the workshop‑grade M323.J67 gauge pin, discuss compatible sets and protective cases, or arrange tailored delivery from our Emmerich hub Technical data Article number: M323.J67 SKU: M323.J67 GTIN: 4061905449666 Manufacturer: Metav IndustryLine Facts Diameter: 19.67 mm Length: 50 mm Weight: 0.2 kg Tolerance / Accuracy: ±0.002 mm Special features Workshop execution Material: Special steel Supplied in protective transport case Category: Gauge pin FAQ What tolerance does the pin offer? The pin has a tolerance of ±0.002 mm, specified for the M323.J67 gauge pin from Metav IndustryLine. Which material is used for this measuring pin? The measuring pin is manufactured from special steel, chosen for dimensional stability and wear resistance. Is the pin supplied ready for transport and storage? Yes, the pin is supplied in a protective transport case to reduce the risk of damage during handling and transit. What are the core dimensions and identifiers? Nominal diameter 19.67 mm, length 50 mm, weight 0.2 kg; GTIN 4061905449666; SKU M323.J67. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.68mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial durability, ±0.002 mm accuracy and exact dimensional control to speed up inspection and reduce rework; order this gauge pin directly via Metav Werkzeuge or contact our consultants for advice. Gauge pin M323.J68 — precision test pin Ø 19.68 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.J68 is a single precision test pin designed for end‑measure checks, gauge setting and repeatable inspection tasks in workshop and inspection environments Workshop‑grade execution for robust daily use Diameter Ø 19.68 mm for exact end‑measure checks High accuracy ±0.002 mm for tight tolerances Supplied in protective transport box Precision for narrow tolerances The core benefit of this test pin is its ±0.002 mm accuracy, which supports reliable pass/fail decisions in close‑tolerance production and quality control. Such a tolerance band corresponds to very small geometric deviation and is suitable for measuring and setting limits on parts where even minor variance leads to functional issues. The stated accuracy reduces the need for repeat measurements and streamlines acceptance checks, while the clearly defined nominal diameter ensures predictable contact geometry for end‑measure comparisons. This focus on measurable precision makes the component a dependable element in a calibrated inspection routine. Durable, workshop‑ready construction Built in a workshop execution and made from special steel, the pin combines wear resistance with a handling form factor that eases frequent use. The 50 mm overall length provides sufficient gripping area for manual placement while keeping the effective measuring section stable; the Ø 19.68 mm nominal diameter matches standard end‑measure practices where precise cylindrical gauges are required. The robust material choice and execution minimise surface wear under repeated use, preserving the measuring diameter and prolonging useful life in a production environment. Seamless integration into inspection workflows As a straightforward, single‑piece test pin, this item integrates into gauge sets, fixture checks and machine setup procedures without additional adaptation. Clear identification aids logistics and traceability, supporting stock control and process documentation; the part is shipped as a single unit for straightforward usage. By providing stable reference geometry, the pin reduces setup times, lowers the risk of measurement error during fixture alignment and supports consistent quality decisions across shifts — a rational improvement to throughput and scrap reduction in everyday manufacturing. Practical handling, protection and supply confidence Delivery in a protective transport box ensures the measuring surface arrives undamaged and ready for immediate use, reducing initial inspection effort and handling risk. With a compact weight and workshop design, storage and routine handling are straightforward, while Metav IndustryLine distribution brings the advantages of a local European quality filter and dependable supply logistics. The overall package suits workshops and inspection benches that require a tough, precise reference pin for recurring end‑measure tasks. Contact Metav Werkzeuge to discuss suitability for specific fixtures or to reserve the Metav IndustryLine gauge pin for reliable inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.J68 GTIN: 4061905449673 Description: Gauge pin, single, Ø 19.68 mm, length 50 mm Facts Diameter: 19.68 mm Length: 50 mm Accuracy / Tolerance: ±0.002 mm Weight: 0.2 kg Special features Material: special steel Workshop execution Single piece supply Supplied in protective transport box FAQ What nominal diameter does the pin have? The pin has a nominal diameter of 19.68 mm, specified for precise end‑measure checks and gauge setting. How accurate is the gauge pin for inspection tasks? Accuracy is ±0.002 mm, making the pin suitable for tight‑tolerance verifications and repeatable control points in production. Is the pin delivered protected for transit? Yes, the gauge pin is supplied in a protective transport box to prevent handling and transit damage. Can this pin be used for fixture and gauge setting? The pin is intended for end‑measure checks and fits common fixture and gauge‑setting procedures as part of standard inspection workflows. How is the part identified for ordering and stock control? The item is listed as SKU M323.J68 and carries GTIN 4061905449673 for clear identification in ordering and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.69mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of a finely finished 19.69 mm diameter and a tight ±0.002 mm tolerance combined with a 50 mm overall length for reliable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or ask the consultants for application guidance. Gauge pin, single, 19.69 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 19.69 mm diameter, 50 mm length is a workshop‑grade end‑measurement gauge intended for quick dimensional checks of bores, jigs and plug fits in production and inspection routines. Precision diameter 19.69 mm ±0.002 50 mm overall length Made from special steel Workshop‑grade finish Fast, measurable accuracy for production control This gauge pin delivers a clear, measurable check on fit and bore size thanks to its 19.69 mm nominal diameter and ±0.002 mm specification. In routine quality control the ability to verify a critical feature with a single, hardened pin reduces cycle time and lowers the risk of downstream rework. The tight tolerance translates directly into reproducible go/no‑go assessments on the shop floor, increasing throughput without sacrificing measurement reliability. Practical handling and application benefit With a compact 50 mm length and workshop‑focused finish, the pin is suited to manual spot checks and fixture verification where a stable reference is required. The single gauge pin format simplifies logistics compared with full sets, making it ideal for targeted inspections and assembly stations. Lightweight handling and the balanced geometry allow quick insertion into bores and gauges, while the special steel material gives wear resistance for repetitive use. Traceability and industrial readiness The component is supplied as an individual inspection pin with clear identification (SKU M323.J69, GTIN 4061905449680), supporting simple inventory and traceability workflows. Purchase through Metav IndustryLine connects this item to a European quality filter and long‑standing distribution network, which supports consistent availability and pragmatic product selection for engineers and technicians. The combination of defined nominal size, tolerance and workshop execution makes this pin a practical tool for standardised end‑measurement tasks. For precise end‑measurement requirements, consult Metav Werkzeuge’s product specialists in Emmerich for tailored advice and ordering assistance. Technical data Article number: M323.J69 GTIN: 4061905449680 Material: Special steel Diameter: 19.69 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.2 kg Facts Mess range min: 19.69 mm Mess range max: 19.69 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Single gauge pin End‑measurement application FAQ What material is the gauge pin made from? The gauge pin (SKU M323.J69) is manufactured from special steel, selected for wear resistance and dimensional stability in workshop environments. What tolerance does the pin provide? The gauge pin offers a tolerance of ±0.002 mm, allowing tight assessment of bore fits and clearance checks. For which tasks is this gauge pin suitable? This single gauge pin is intended for end‑measurement checks, plug‑fit verification and quick bore inspections in production and assembly settings. Is the pin supplied as part of a set? The item is supplied as an individual gauge pin (single unit), not as a complete set; the SKU M323.J69 identifies the single‑piece configuration. How is the pin identified for inventory and traceability? Identification is provided via SKU M323.J69 and GTIN 4061905449680 to support inventory control and traceability procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.6mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise workshop measuring with a compact, workshop-grade gauge pin that combines high repeatability and robust handling; the ±0.002 mm tolerance and special steel construction ensure reliable end‑measure checks and fast set‑up of fixtures—order or request advice via Metav Werkzeuge for application support. Test pin M323.J60 — Gauge pin, Ø19.6 mm, 50 mm length (Metav IndustryLine) Test pin M323.J60 is a workshop‑grade gauge pin intended for accurate end‑measure inspections and fitting tasks in mechanical workshops and toolrooms. Workshop‑grade construction for daily use Diameter Ø19.6 mm, length 50 mm Tolerance ±0.002 mm for precise fits Supplied in transport box for safe handling Precision for everyday workshop checks The compact inspection pin is designed for repeatable, quick checks where tight clearances matter. Classified in the Micro class (10–100 mm) for measuring tools, this pin provides the stiffness and stability expected for fine mechanical work; the moderate length and compact diameter reduce bending and operator‑induced error. With a stated tolerance of ±0.002 mm, the pin supports demanding fit checks and plug‑gauge tasks commonly encountered in maintenance, jigs and short‑run quality control. Robust design for reliable handling Constructed from special steel and finished for workshop use, the pin balances wear resistance and machinability so that repeated insertions and contacts maintain form and function. The 50 mm overall length and Ø19.6 mm diameter give a compact centre of mass and straightforward handling, while the workshop‑grade specification signals a tool built to withstand daily use. Supplied in a transport box, the component remains protected during storage and transit, keeping the gauge pin ready for immediate use and reducing the risk of surface damage. Integration into inspection workflows for faster throughput As a single‑piece inspection aid, the pin simplifies fixture set‑up and rapid verification of mating parts, cutting down adjustment cycles and unplanned stops. The combination of high repeatability and rugged workshop execution means the pin can be integrated into pre‑assembly checks, in‑process inspections or jig set‑up routines without lengthy training. For purchasers seeking a dependable, easy‑to‑use gauge, this test pin complements broader measurement kits and supports a pragmatic approach to shop‑floor quality control. Contact Metav Werkzeuge for personalised advice on using the Metav IndustryLine test pin in production or for availability and delivery from Emmerich Technical data Article number: M323.J60 GTIN: 4061905449635 Eclass: 21170231 Facts Diameter: 19.6 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.2 kg Special features Material: Special steel Workshop version Delivered in transport box for transport Supplied as single test pin (individual unit) FAQ What is the main application for this gauge pin? The M323.J60 gauge pin is intended for end‑measure inspections, setting fixtures and quick fit checks in workshop and toolroom environments. How precise is the inspection pin for fit verification? The inspection pin offers a tolerance of ±0.002 mm, making it suitable for precise fit and clearance verification where tight tolerances are required. Is the pin protected during transport and storage? Yes, the pin is supplied in a transport box to protect the surface and preserve measurement quality during handling and transit. What material is used and how does this affect durability? Made from special steel, the pin provides a balance of surface hardness and wear resistance appropriate for repetitive workshop use. Can this gauge pin be used for setting up jigs and fixtures? The compact geometry and high repeatability make the pin well suited to fixture set‑up and short‑run inspection tasks on the shop floor. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com