Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1 mm Gauge Ball Pair Hardened Chrome Steel Accuracy 0.003 mm, Diameter Tolerance 0.00008 mm - Metav IndustryLine
Combine hardened chrome steel construction with a certified 0.003 mm measurement accuracy and a tight diameter tolerance of 0.00008 mm for reliable reference and repeatable inspection results; order the gauge ball pair directly via Metav Werkzeuge or ask our consultants if needed. Gauge ball pair M318.411 – hardened chrome steel, 0.003 mm accuracy The gauge ball pair is a compact reference set designed for high-precision measurement and alignment tasks in inspection and toolmaking. Hardened chrome-steel body Diameter accuracy 0.003 mm Diameter tolerance 0.00008 mm Stable reference for repeatable measurement results Built from hardened chrome steel, these miniature 1 mm spheres act as a stable reference for comparative measurements and fixture checks. The combination of fine surface finish and controlled geometry reduces measurement scatter, so results remain reproducible across repeated cycles. With a diameter accuracy of 0.003 mm and a machining tolerance of 0.00008 mm, the set provides a reliable benchmark for calibrating microscopes, comparators and precision measuring fixtures, supporting efficient quality control workflows and shorter inspection cycles. Robust wear resistance and surface integrity The manufacturing process yields a surface roughness of Ra 0.00001 mm and a hardness above >HRC 62, which together prolong service life under regular contact and minimise wear-induced measurement drift. The compact spheres are lightweight at 0.05 kg per set yet exceptionally resistant to deformation; this ensures that the reference geometry remains stable even under repeated handling. The result is fewer replacements, lower downtime and consistent measurement quality for production and laboratory environments. Practical pair format for alignment and comparison Supplied as a pair, the spheres enable comparative checks, contact-probe verification and simple go/no-go set-ups without elaborate fixtures. Their small form factor integrates easily into existing jigs and measuring stations, and the matched pair geometry simplifies symmetry and runout assessments. Intended as precision gauges in the “Lehren” category, these spheres are particularly suitable where compact, high-accuracy reference elements are required for fixture alignment, optical calibration or instrument verification. For advice on integrating the Metav IndustryLine gauge ball pair into existing inspection procedures or to request a tailored supply from Metav Werkzeuge in Emmerich, please contact our technical consultants for specification support and delivery arrangements. Technical data Article number: M318.411 GTIN: 4054469183992 Material: hardened chrome steel Diameter: 1 mm Set contents: 2 pieces Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness (Ra): 0.00001 mm Hardness: >HRC 62 Weight: 0.05 kg Facts Diameter nominal: 1 mm Accuracy (per sphere): 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness Ra: 0.00001 mm Hardness: >HRC 62 Pieces per set: 2 Net weight: 0.05 kg Special features Hardened chrome-steel construction Precision-ground geometry Very low surface roughness Supplied as matched pair Category: Gauges (Lehren) Brand: Metav IndustryLine FAQ What is the nominal diameter of the spheres? The spheres have a nominal diameter of 1 mm as stated for the gauge ball pair M318.411 from Metav IndustryLine. How precise are the gauge balls for reference work? The gauge ball pair provides a stated accuracy of 0.003 mm with a diameter tolerance of 0.00008 mm, suitable for high-precision comparative measurements. Are these spheres suitable for toolroom and lab use? Yes, the hardened chrome-steel construction and a surface roughness of Ra 0.00001 mm make the set appropriate for both toolroom inspections and laboratory reference tasks. How many pieces are included and what is the weight? The supply consists of a matched set of two spheres and the combined net weight is 0.05 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Limit Gauge Pin Go/No-Go Wear Measurement, Hardened Steel, DIN 7162 - Filetta
Benefit from a combination of hardened steel durability and conformity to DIN 7162, with a built‑in wear allowance on the go side that extends service life and maintains repeatable pass/fail decisions; order the limit gauge pin directly via Metav Werkzeuge or consult our specialists for application support. Limit gauge pin – hardened steel, DIN 7162 (Filetta) A limit gauge pin designed for rapid go/no‑go inspection in production and quality control, made to the DIN 7162 standard for consistent interchangeability and long‑term shop‑floor reliability Hardened steel construction Conforms to DIN 7162 Wear allowance on go side Faster pass/fail checks mean fewer production interruptions A compact, standards‑based gauge pin streamlines routine inspection by delivering clear go/no‑go decisions in one motion. The hardened construction reduces micro‑deformation under repeated contact, so checks stay reliable over thousands of cycles. For workshop managers this translates into shorter inspection times and fewer ambiguous measurements, supporting a predictable production flow and faster throughput. Durable design reduces inspection-related rework Built from hardened steel and specified to DIN tolerances, the pin resists wear that would otherwise necessitate early replacement. The incorporated wear allowance on the good (go) side compensates for gradual material loss, extending usable life and postponing recalibration or swap‑outs. Reduced tool turnover lowers maintenance interruptions and helps sustain inspection capacity on busy lines. Standards compliance supports traceability and interchangeability Conformance to DIN 7162 ensures that the pin mates with established limit gauge systems and that measured parts are judged against commonly accepted tolerances. The clear, repeatable geometry of the pin facilitates consistent judgement across operators and shifts, aiding quality documentation and supplier communication. Using standardised gauges simplifies audits and aligns measurement practice with industry expectations Speak to Metav Werkzeuge for application advice or to arrange supply of the Filetta limit gauge pin MS911.158 — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for tailored recommendations Technical data Article number: MS911.158 Product name: Limit gauge pin Material: Hardened steel Standard: DIN 7162 Facts Mass / size designation: 1 SKU: MS911.158 Special features Wear allowance on go side Intended use: Go/no‑go inspection FAQ What is the primary application of this gauge pin? The Filetta limit gauge pin MS911.158 is intended for rapid go/no‑go checks in production and inspection environments, providing a clear pass or fail indicator for bore and pin checks. How does the wear allowance help in daily use? The wear allowance on the go side of the limit gauge pin compensates for gradual surface wear, prolonging the service life and maintaining reliable go/no‑go judgements over extended use. Is the pin compliant with recognised standards? Yes, the limit gauge pin MS911.158 is manufactured to DIN 7162, ensuring compatibility with standard limit gauge practices and facilitating exchangeability between tools. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1 mm Limit Plug Gauge, Wear Allowance On Master Side, Hardened Steel DIN 7162 - Filetta
The combination of hardened steel construction, conformity to DIN 7162 and the built‑in wear allowance on the good side ensures repeatable pass/fail checks and a long service life; order the limit gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Limit gauge pin MS911.200 by Filetta — hardened steel, DIN 7162 The Limit gauge pin MS911.200 is a hardened‑steel limit gauge designed for rapid go/no‑go checks and routine dimensional control in production and inspection environments. Hardened steel construction to DIN 7162 Wear allowance on the good side Precision ground for repeatable checks Compact gauge pin for workshop inspection Reliable pass/fail control for fast inspection The MS911.200 serves as a robust, low‑complexity tool for immediate acceptance decisions on shafts, bores and fitments. Crafted from hardened steel, the gauge gives a clear binary signal—either the pin fits (go) or it does not (no‑go)—so measurement time is reduced and throughput is increased. Conformity to DIN 7162 provides a recognised reference for interchangeability and auditability, while the documented wear allowance on the good side compensates for gradual surface wear without compromising the threshold for rejection. This combination supports consistent quality control across repetitive production tasks. Durable design that reduces maintenance and uncertainty Surface hardening and precision grinding deliver stable contact geometry and precision that endures under frequent use. The hardened material resists abrasion, limiting size drift and extending intervals between replacements. Because the pin is designed with a measured wear allowance, inspection regimes can be planned rather than reacted to—maintenance cycles become predictable, and machine downtime is reduced. The result is fewer interruptions to production and a lower total cost of inspection over the component life cycle. Practical integration into inspection routines Compact and straightforward to handle, this limit gauge pin suits bench inspection, assembly stations and spot checks on the shop floor. Its geometry allows quick visual and tactile confirmation of conformity, supporting lean inspection workflows and minimising operator training. As a plain‑language measuring aid, the gauge complements digital systems by providing immediate, unambiguous results where rapid decisions are required. For customers seeking a balanced mix of durability and ease of use, this solution bridges laboratory accuracy and workshop practicality. For reliable, DIN‑compliant limit gauges from Filetta, contact Metav Werkzeuge for stock availability and tailored advice — Metav's specialists can recommend the correct gauge size and inspection routine for the application Technical data Article number: MS911.200 Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on the good side Facts Size: 1 SKU: MS911.200 Special features Hardened steel Wear allowance on the good side Precision ground Limit gauge / go‑no‑go function Category: gauges, gauge pins FAQ What material is the MS911.200 made from? The MS911.200 limit gauge pin is manufactured from hardened steel to provide wear resistance and stable contact geometry. To which standard does this gauge conform? This gauge complies with DIN 7162, ensuring a recognised reference for dimensional limits and interchangeability. What does "wear allowance on the good side" mean? The wear allowance indicates that the 'go' side has been dimensioned to permit a measured amount of surface wear before the part reaches the rejection threshold, extending useful life while retaining inspection integrity. For which checks is this limit gauge pin suitable? The pin is intended for go/no‑go acceptance checks on bores, shafts and mating features during production, assembly and incoming inspection. Is the MS911.200 suitable for workshop use or only for lab inspection? Its compact, robust design makes the MS911.200 suitable for both workshop inspection and routine production checks, offering quick, unambiguous pass/fail results. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1 mm Precision Feeler Gauge Set 13 Blades 100mm Tapered, Special Steel, Factory Standard - Metav IndustryLine
Take advantage of the combination of precise gap coverage, a compact workshop-friendly format and robust special-steel construction to ensure reliable clearance and setting tasks. Order the set directly via Metav Werkzeuge or contact the consultants for application advice. Metav IndustryLine Precision Feeler Gauge Set M318.013 – 13-blade, 0.05–1.00 mm, 100 mm The Metav IndustryLine Precision Feeler Gauge Set M318.013 is a compact inspection tool for checking and setting narrow gaps and clearances in machine maintenance and toolmaking. 13 hardened blades, 0.05–1.00 mm Blades 100 mm long for stable handling Made from high-grade special steel Compact set for precise gap measurement Precision where it matters The M318.013 offers a continuous range from 0.05–1.00 mm across 13 blades, enabling accurate selection of clearance values without the need for multiple measuring tools. The set is produced to factory standard, providing predictable tolerances and a reproducible thickness sequence; this rational design reduces setup time in measurement and adjustment tasks and supports reliable process results on machines and gauges. Durable construction for everyday workshop use Blades are formed from special steel and sized at 100 mm to give a stable contact area that resists bending during repeated use. The compact assembly keeps the tools organised and protects individual leaves, while the lightweight nature (approx. 0.07 kg) makes handling straightforward on the bench. The resulting combination of material choice and geometry offers long service life and consistent feel when measuring or setting shims and clearances. Practical layout and typical applications The set covers the full blade series (0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 / 0.60 / 0.70 / 0.80 / 0.90 / 1.00 mm), allowing exact selection or combination of leaves for intermediate thicknesses. Technicians benefit from quick identification of the required thickness for valve clearances, spark-plug gaps, bearing play or fine adjustment of fixtures. The clear sequence of blades supports repeatable work steps and simplifies documentation of measured clearances. For tailored advice on integrating the Metav IndustryLine precision feeler gauge set M318.013 into workshop routines, contact Metav Werkzeuge for application support and delivery from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M318.013 GTIN: 4054469127651 Manufacturer: Metav IndustryLine SKU: M318.013 Data Measuring range: 0.05–1.00 mm Blade length: 100 mm Number of blades: 13 Weight: 0.07 kg Accuracy: 0.012 mm Special features Material: Special steel Standard: Factory standard Set: 13 blades, assorted thicknesses Application: Gap and clearance measurement, shim and valve setting FAQ What thicknesses are included in the set? The set includes blades covering 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 / 0.60 / 0.70 / 0.80 / 0.90 / 1.00 mm and can be combined for intermediate values. Is the gauge suitable for engine valve clearance work? Yes, the feeler gauge set M318.013 is designed for precise clearance checks and is suitable for typical valve and ignition-gap adjustments in workshop maintenance. What material are the blades made from? Blades are manufactured from special steel, chosen for dimensional stability and wear resistance in repetitive measurement tasks. How is the set delivered and organised? The product is supplied as a compact set of 13 blades with sequential thicknesses, assembled for convenient handling and safe storage. Can the set be used for precision fixture and jig adjustments? The continuous range of thicknesses and the stable 100 mm blade length make this set appropriate for setting and verifying small clearances in fixtures and jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set 13 Blades 150mm Tapered Ends With Ring - Metav IndustryLine
Take advantage of precise gap setting and consistent repeatability thanks to the combination of a 0.05–1.00 mm measurement span and a 150 mm blade length; the tapered profile and locking ring ensure access to narrow joints and tidy storage in daily workshop use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Precision Feeler Gauge Set — 13 Blades, 0.05–1.00 mm, 150 mm A precision feeler gauge set supplied on a locking ring, engineered for gap, clearance and shim measurement across 13 tapered blades from 0.05 to 1.00 mm. 13 precision blades 0.05–1.00 mm range 150 mm blade length for reach and stability Tapered blade profile for fine access Locking ring for organised storage Reliable accuracy for routine and critical checks The set delivers consistent dimensional checking with a declared measurement tolerance of 0.012 mm, making it suitable for fine adjustment tasks and quality-control sampling. By combining a compact range of metrological increments with a stable 150 mm blade, the set reduces rework and speeds up set-up procedures on machines and assemblies. The numerical spacing of the blades covers standard increments from 0.05 mm upwards, which simplifies selection and eliminates guesswork when setting clearances on bearings, valves or mating surfaces. Access and handling designed for practical workshops Each blade features a tapered profile, enabling measurement in confined gaps where straight blades struggle to reach; the taper also improves tactile feedback during insertion and removal. Mounted on a locking ring, the blades remain organised and are quick to deploy, which supports efficient work flow in busy production or maintenance environments. The 150 mm length gives a balance between reach and stiffness, so measurements remain repeatable without excessive flex or handling complexity. Durability and everyday usability that supports quality assurance Constructed as a 13-piece set with clearly marked thicknesses from 0.05 mm to 1.00 mm, the kit is tailored for regular shop-floor use. The compact weight (approximately 0.10 kg) and flat blade geometry minimise storage space while enabling a confident feel during measurement. Supplied to a factory standard (Werksnorm), the set is aimed at technicians and inspection staff who require a robust, easy-to-read tool for gap setting, shim selection and clearance verification. For trustworthy precision from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for ordering and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M318.013.1 GTIN: 4054469164656 Tariff code: 90173000 Numerical data Blade length: 150 mm Blade width: 12.7 mm Measurement range: 0.05–1.00 mm Accuracy / tolerance: 0.012 mm Weight: 0.10 kg Pieces per set: 13 Design & features Tapered blade profile (konische Form) Locking ring included Blade thicknesses: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 / 0.60 / 0.70 / 0.80 / 0.90 / 1.00 mm Supplied to Werksnorm FAQ What measurements does this feeler gauge set cover? The Precision feeler gauge set M318.013.1 covers thicknesses from 0.05 mm up to 1.00 mm across 13 individual blades, suitable for fine gap and clearance checks. Is the set appropriate for workshop use on mechanical assemblies? Yes. The 150 mm blade length and tapered geometry of the blades make the set well-suited to workshop tasks such as bearing clearance, valve lash and shim selection. How precise are the measurements with this gauge set? The set is supplied with a declared measurement tolerance of 0.012 mm, providing reliable repeatability for routine inspection and adjustment tasks. Does the set include a storage or organisation feature? The blades are supplied on a locking ring for tidy storage and quick selection, supporting efficient handling during repetitive measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set 13 Leaves, Tapered, Ring Mounted, 1000 mm Length - Metav IndustryLine
Take advantage of the combination of a 13-blade, tapered design, extended 1,000 mm reach and fine nominal accuracy of ±0.012 mm for reliable gap and thickness checks; order the set directly via Metav Werkzeuge or consult the team for application advice. Precision feeler gauge set M318.013.5 — 13-blade tapered, 1,000 mm The Precision feeler gauge set M318.013.5 is a long-reach, ring-mounted tool designed for precise thickness and gap measurement in inspection, assembly and tool setting applications Tapered blade geometry for narrow gaps 13-blade set on secure retaining ring Thickness range 0.05–1.00 mm 1,000 mm blade length for extended reach Repeatable precision for inspection and setup The set is built for consistent measurement in workshop and inspection environments. With a nominal accuracy of ±0.012 mm, the gauges support reproducible thickness assessment across a broad range of thin gaps; the 0.05–1.00 mm blade range covers fine to medium clearances commonly encountered in precision engineering. The ring-mounted format keeps blades organised and prevents loss, while the tapered geometry permits access to confined joints that straight blades cannot reach. This combination reduces measuring time and improves process stability during setup and routine checks. Practical handling that speeds up workflow Ergonomics and handling are central to the set’s design: the blades sit on a robust retaining ring for rapid selection, and the long blade length offers reach without repeatedly repositioning the operator or component. The tapered profile helps guide the blade into contact so measurements are taken with minimal disturbance to the part. As a result, gauging becomes faster and less error-prone, supporting faster production cycles and more efficient quality control—an operational benefit that directly improves machine set-up and inspection throughput. Kit composition and quality assurance The set comprises 13 blades ranging from 0.05 mm up to 1.00 mm, supplied together as a single organised kit to simplify inventory and tool management. The blades conform to the supplier’s factory standard (Werksnorm) and the long overall blade length of 1,000 mm is expressly intended for applications requiring extended reach or inspection across elongated joints. The conical blade form increases versatility for unconventional gap profiles while the compact assembly minimises storage footprint in the toolroom. For tailored advice or to order the Metav IndustryLine precision feeler gauge set M318.013.5, contact Metav Werkzeuge in Emmerich—phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: M318.013.5 GTIN: 4054469162713 eClass: 21170212 Tariff code: 90173000 Brand: Metav IndustryLine Facts Length: 1,000 mm Nominal accuracy: 0.012 mm Weight: 0.64 kg Measurement range: 0.05–1.00 mm Pieces per set: 13 Special features Tapered (conical) blade form Mounted on retaining ring Delivered as organised set Conforms to supplier factory standard (Werksnorm) FAQ What measurement range does this feeler gauge set cover? The Metav IndustryLine feeler gauge set M318.013.5 covers a thickness range from 0.05 mm to 1.00 mm, providing fine gradations for precise gap checks. Is the blade length suitable for long joints or deep recesses? Yes, the 1,000 mm blade length of the M318.013.5 offers extended reach for elongated joints and hard-to-reach inspection points. How is the set supplied and organised? The gauges are supplied as a single organised set on a retaining ring, with 13 blades arranged by thickness for quick selection and secure storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set 20 Leaves Stainless Steel Nickel-Plated Case - Metav IndustryLine
Benefit from a compact 20‑blade stainless steel set with a measuring range of 0.05–1.00 mm and factory standard accuracy for dependable gap verification; order directly via Metav Werkzeuge or consult our specialists for application support. Precision Feeler Gauge Set M318.028 – 20 blades, INOX stainless steel (Metav IndustryLine) The Precision Feeler Gauge Set M318.028 is a compact 20‑blade gauge for precise clearance, gap and shim measurements in workshop and inspection environments. 20‑blade set for precise steps INOX stainless steel blades for corrosion resistance Measuring range 0.05–1.00 mm in fine increments Nickel‑plated sheath for durable everyday handling Repeatable measurement performance for inspection routines The set is engineered to deliver repeatable gap measurement, combining a broad span of fine increments with robust blade material. With a measuring range of 0.05–1.00 mm, the kit covers typical shim and clearance checks without swapping tools, reducing cycle time during routine inspections. The declared accuracy of 0.012 mm underlines suitability for workshop quality control and maintenance checks, providing a verifiable baseline for acceptance criteria and process documentation. The factory standard (Werksnorm) ensures consistent manufacture and traceable expectations for everyday metrology tasks. Compact set design that improves handling and storage A compact organiser holds 20 blades, each 100 mm in length and 12.7 mm wide, allowing quick selection and combination. The nickel‑plated sheath protects the blades in transit and on the bench while maintaining a low profile for toolboxes and inspection kits. Blades are presented in graduated thicknesses to simplify build‑up methods: several thin blades can be combined to reach a non‑standard thickness without sacrificing accuracy. This arrangement supports faster set‑up during engine, valve or bearing gap adjustments and reduces the likelihood of rework. Practical applications across workshops and assembly lines This feeler gauge set is suited to mechanical workshops, maintenance bays and production quality control where rapid, reliable clearance measurement is required. Typical uses include valve lash setting, bearing clearance checks and shim selection in assembly work. The INOX stainless steel construction resists corrosion from oils and workshop humidity, maintaining dimensional stability so results remain comparable over time — a rational investment that helps avoid production stops and quality deviations. Metav IndustryLine quality and service advantage Offered under the Metav IndustryLine range, the set benefits from the supplier’s emphasis on accessible precision. Metav’s inventory and quality filter in Emmerich support reliable supply and consistent part specification, backed by an extensive product range for measurement tasks. The compact set design, measured tolerances and durable finish combine to deliver dependable daily performance, aligning with professional expectations for reproducibility and traceability in inspection records. For precise gap and clearance checks with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for ordering or specialist advice: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: M318.028 GTIN: 4054469127774 Tariff number: 90173000 Facts Measuring range: 0.05–1.00 mm Number of blades: 20 Blade length: 100 mm Blade width: 12.7 mm Accuracy: 0.012 mm Special features Material: INOX stainless steel Sheath: nickel‑plated Delivery: set of blades (20 pieces) Standard: factory standard (Werksnorm) FAQ What material are the blades made from? The blades in the Precision Feeler Gauge Set M318.028 are manufactured from INOX stainless steel, offering corrosion resistance suitable for workshop environments. How many thickness steps are included and what is the measuring range? The set contains 20 individual blades covering a measuring range of 0.05–1.00 mm, allowing fine incremental checks and combined thicknesses for bespoke fits. Is the set suitable for engine valve clearance measurements? Yes, the 0.05–1.00 mm range and the robust construction of the Metav IndustryLine feeler gauge set make it well suited for valve lash and similar clearance tasks in engines and machinery. How is the set delivered and how are the blades protected? The Precision Feeler Gauge Set M318.028 is supplied as a compact set of 20 blades housed in a nickel‑plated sheath that protects the blades during transport and storage. What production standard applies to these gauges? Manufacture follows a factory standard (Werksnorm), providing consistent dimensional control for routine inspection and maintenance work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set 20-Piece Tapered Tips Ring Mount 500 mm Length - Metav IndustryLine
Combine long, tapered 500 mm blades with a fine 0.05–1.00 mm thickness range to speed up gap setting and verification; the ring-mounted 20-piece set keeps blades organised for repeated use. Order the set directly via Metav Werkzeuge or contact our consultants for application advice. Precision feeler gauges M318.020.4 — 20-piece set with tapered 500 mm blades (Metav IndustryLine) The Precision feeler gauges M318.020.4 are intended for precise gap measurement, shim selection and inspection tasks in precision engineering, maintenance and assembly applications. 20 blades, 0.05–1.00 mm range 500 mm tapered blades for extended reach Ring-mounted set for organised storage High repeatability, ±0.012 mm accuracy Long, tapered blades for access and repeatable gap control The set's 500 mm tapered blades provide access to deep or confined gaps where standard-length feeler blades cannot reach, enabling measurements on assemblies, fixtures and housings without disassembly. The conical form reduces insertion resistance and allows progressive feel when selecting the correct shim thickness. Using long, narrow blades cuts handling time during set-up and reduces the need for secondary probes, improving process efficiency on repeated tasks. Fine thickness gradation for precise adjustment and calibration With a 0.05–1.00 mm thickness range arranged across 20 blades, the set covers fine steps for micro-adjustment and alignment tasks. The specified reproducibility of approximately ±0.012 mm offers consistent results for routine inspection and go/no-go checks. The blades' 12.7 mm working width helps stabilise contact while remaining thin enough for narrow clearances, which simplifies selection of the optimal shim without sacrificing tactile feedback or control. Organised design that suits workshop and service environments Mounted on a ring, the blades are kept together and protected, promoting orderly storage and quick selection during shift work or field service calls. The complete 20-piece set is lightweight (approx. 0.55 kg) and compact for transport to machine tools or test stations. Supplied to a manufacturer's standard (Werksnorm), the set is intended for repetitive use in production and maintenance contexts where speed and clarity of measurement reduce rework and downtime. Practical benefits for engineering, maintenance and quality control Specifically designed for metrology and mechanical workshops, this feeler gauge set shortens set-up times and improves first-pass assembly accuracy. The combination of long reach, fine thickness increments and a sorted ring format contributes to fewer measurement iterations and better traceability of adjustment settings. For organisations aiming to raise throughput while keeping tolerance control tight, the set is a pragmatic tool that brings measurable operational benefits. Contact Metav Werkzeuge to discuss how the Metav IndustryLine 20-piece precision feeler gauge set can be integrated into production or maintenance routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M318.020.4 GTIN: 4054469162720 Manufacturer: Metav IndustryLine Numbers Thickness range: 0.05–1.00 mm Number of blades: 20 Blade length: 500 mm Working width: 12.7 mm Weight: 0.55 kg Reproducibility / accuracy: ±0.012 mm Customs tariff code: 90173000 Special features Conical / tapered blade geometry Ring-mounted for organised storage Supplied as a complete set Manufactured to Werksnorm FAQ What applications suit these long feeler blades? The precision feeler gauges M318.020.4 are suitable for gap setting, shim selection and inspection in precision engineering, maintenance and assembly where extended reach and fine thickness control are required. How fine are the thickness increments in the set? The M318.020.4 set covers thicknesses from 0.05 mm to 1.00 mm across 20 blades, enabling precise stepwise adjustment and fine tuning during alignment tasks. Is the set easy to store and transport? Yes, the blades are ring-mounted to keep the set organised; the complete set is lightweight (approx. 0.55 kg) and intended for workshop or field use. What repeatability or accuracy can be expected? The set provides reproducible measurements with an approximate repeatability of ±0.012 mm, suitable for routine inspection and adjustment work. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set 20pcs Conical Tips 200mm With Ring, Factory Standard - Metav IndustryLine
Take advantage of a compact, high‑precision set that covers 0.05–1.00 mm with long 200 mm blades and tapered tips for access to narrow gaps; the combination of measurable accuracy and robust handling speeds up setup and inspection tasks. Order directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler gauges on ring — long blades for precise gap setting and inspection Precision feeler gauges on ring designed for clearance measurement, assembly inspection and adjustment work where thin, consistently sized blades and a controlled profile are required Thickness range 0.05–1.00 mm 200 mm blade length Tapered blades for narrow gaps Reliable measurement where reproducibility matters The 20‑piece set provides a continuous thickness range from 0.05–1.00 mm, enabling precise incremental selection for shimming, valve setting and clearance checks. With an indicated accuracy of ±0.012 mm, these blades support repeatable results in routine quality control and setup tasks, reducing rework and downtime. The long 200 mm blades give both reach and stability, so measurements on deeper seats or recessed joints are simpler and less prone to bending errors. Practical handling and workplace efficiency A compact ring‑bound format keeps all blades organised and accessible, while the tapered profile helps enter tight joints without damaging surfaces. The set’s low overall weight and balanced blade geometry improve one‑handed handling during assembly operations, so operators can work faster without sacrificing control. The clear incremental markings on each blade allow quick identification, supporting efficient workflow and traceable inspection routines. Built for workshop use and traceability Manufactured to Werksnorm and supplied as a complete set, these feeler blades combine a practical tool design with the consistency required in professional environments. The ring ensures secure storage and fast selection, while the range of standard thicknesses supports a wide spectrum of mechanical tasks. When standardisation and reliable bench tools matter, this set is a straightforward choice that complements existing inspection toolkits. Contact Metav Werkzeuge today for specification matching or application guidance — Metav Werkzeuge in Emmerich provides product expertise and direct supply for industry and trade. Technical Data Article number: M318.020.2 GTIN: 4054469164694 SKU: M318.020.2 Facts Thickness range: 0.05–1.00 mm Blade length: 200 mm Pieces per set: 20 Accuracy: ±0.012 mm Weight: 0.22 kg Tariff number: 90173000 Special features Tapered blade shape Ring mounting for secure storage Supplied as a set FAQ What thicknesses are included in the set? The set contains blades covering a continuous range from 0.05 mm up to 1.00 mm in standard increments, allowing precise selection for various clearance and shim tasks. Is the accuracy suitable for workshop inspection? Yes, with an indicated accuracy of ±0.012 mm, the set is suitable for workshop quality control, assembly checks and repeatable setting procedures using the Precision feeler gauges on ring. How are the blades stored and identified? Blades are fixed on a retention ring for organised storage and quick selection; each blade is marked with its nominal thickness for fast identification during routine work. Which standard applies to this product? The product is manufactured to Werksnorm, ensuring consistent dimensions and suitability for industrial use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set 32-Piece, Tapered Blades 100 mm Length, Special Steel, Factory Standard - Metav IndustryLine
Benefit from a compact 100 mm set that covers a fine thickness spectrum of 0.03–1.00 mm in 32 precise steps; the combination of a broad metric range, 0.012 mm nominal accuracy and robust special steel construction supports repeatable gap and clearance measurements. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler gauges set M318.010 — 32 blades, 0.03–1.00 mm (Metav IndustryLine) The Precision feeler gauges set is designed for accurate clearance and gap measurement in assembly, inspection and maintenance tasks, featuring compact 100 mm blades and a comprehensive metric thickness range. 32 blades in fine, metric increments Thickness range 0.03–1.00 mm 100 mm blade length for stable handling Made from special steel for durability Measure a wide variety of gaps with fewer tool changes The set covers a continuous metric spectrum from 0.03–1.00 mm, split into 32 graduated blades that permit stepwise selection of the required thickness. This fine granularity reduces the need for stacking multiple shims or repeatedly adjusting instruments, translating into shorter set-up and inspection times. The declared 0.012 mm figure indicates the production tolerance that supports consistent comparison measurements; combined with the comprehensive blade selection, this yields a pragmatic balance between measurement resolution and operational speed for workshop quality control. Compact dimensions that improve handling and inspection throughput Each blade is 100 mm long and the complete set is lightweight, which enhances manoeuvrability in confined spaces and on components with limited accessibility. The relatively short blade length contributes to torsional stability during insertion into narrow gaps, helping to avoid misleading deflection and to maintain repeatable readings. Supplied as a complete set of 32 blades, the kit promotes efficient workflow: fewer interruptions, faster inspection loops and a more systematic approach to clearance assessment across batches or assemblies. Durable construction and clear workshop classification Manufactured from special steel, the blades are intended for repeated use in industrial environments where mechanical wear is a concern. The set is delivered under factory standard (Werksnorm), ensuring consistent finishing and thickness labelling across the blades for straightforward selection during inspection rounds. As a metric, workshop-grade set, it is well suited to mechanical assembly, toolroom checks and general maintenance tasks where a reliable, compact feeler kit reduces uncertainty and supports traceable measurement routines. For reliable gap assessment with the backing of Metav IndustryLine, contact Metav Werkzeuge for tailored advice and ordering information — Metav’s technical team in Emmerich can help specify the right set for the application. Technical data Article number: M318.010 GTIN: 4054469164748 Manufacturer: Metav IndustryLine Material: Special steel Facts Measurement range: 0.03–1.00 mm Individual blade thicknesses: metric increments across 32 values Blade length: 100 mm Pieces per set: 32 Nominal accuracy / production tolerance: 0.012 mm Weight: 0.02 kg Tariff number: 90173000 Special features Delivered as a set Factory standard (Werksnorm) finishing Compact 100 mm blades for stable handling Intended for clearance and gap measurement FAQ What range of thicknesses is covered by the set? The set covers a continuous range from 0.03 mm up to 1.00 mm in 32 distinct metric blade thicknesses, enabling fine incremental selections for clearance measurement. Can these blades be used for both internal and external gap checks? Yes, the blades are suitable for standard clearance and gap checks in assemblies and maintenance tasks where feeler gauges are the appropriate tool. What material are the blades made from and what does that mean for durability? Blades are made from special steel, offering mechanical robustness for repeated use in workshop environments and a consistent edge finish for reliable insertion and extraction. Is the M318.010 set suitable for precision toolroom work? The M318.010 set is aimed at workshop and inspection applications that require a fine selection of metric thicknesses; its blade granularity supports routine precision tasks and comparative measurements. How is the set supplied and what documentation is included? The kit is supplied as a 32-piece set with labelled blades and factory standard finishing; full technical details are listed above in the technical data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set Tapered Ends Ring Holder 20-Piece, 300 mm Length - Metav IndustryLine
Take advantage of the combination of conical blade geometry, a 300 mm blade length and precise leaf tolerances for reliable gap and clearance checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler gauges (ring-mounted) — 0.05–1.00 mm, 300 mm, Metav IndustryLine The Precision feeler gauges (ring-mounted) provide a practical solution for measuring small clearances and shim thicknesses in workshops and inspection stations, combining long blades with a tapered tip for easy insertion into tight joints. Precision-ground blades 0.05–1.00 mm 300 mm blade length for deep access Conical tip for easy insertion Ring-mounted for tidy storage Consistent, measurable clearance control for production These feeler leaves are designed for repeatable gap measurement where reproducibility matters. Each blade is machined to fixed thicknesses from 0.05 to 1.00 mm, offering a fine gradation of increments that supports precise setting and verification tasks. The indicated accuracy of ±0.012 mm describes the manufacturing tolerance of the blades and provides a reliable baseline for inspection routines; for traceable certification refer to the technical data. By using calibrated, precision leaves rather than estimations, measurement uncertainty is reduced and process stability improves, which contributes directly to quality assurance and shorter setup times on the shop floor. Long blades and conical geometry for difficult access The extended 300 mm blade length permits access to deep grooves, valve seats and assemblies where standard short leaves cannot reach. The conical tip eases insertion into narrow gaps and progressively engages the contact faces, reducing the risk of damage to delicate parts and improving tactile feedback during measurement. For maintenance and assembly tasks this geometry speeds up the measurement sequence and minimises fumbling, enabling technicians to work more efficiently while preserving component surfaces. Practical workshop handling and organised storage Delivered in a compact, ring-mounted format, the set keeps leaves aligned and immediately accessible while preventing loss of individual blades. The robust construction and moderate mass make the instrument comfortable to handle at the bench or in mobile inspection kits. Finished to a factory standard (Werksnorm), the set suits routine process checks in mechanical workshops, toolrooms and assembly lines where quick, reliable clearance checks are required. For applications demanding traceable calibration or special tolerances, Metav Werkzeuge can advise on supplementary services or tailored solutions. For dependable gap verification and practical workshop use, contact Metav Werkzeuge in Emmerich for specialist advice or to arrange procurement through our consultants at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M318.020.3 GTIN: 4054469164700 Brand: Metav IndustryLine Standard: Werksnorm Length: 300 mm Measurement range: 0.05–1.00 mm Blade width: 12.7 mm Weight: 0.35 kg Facts Accuracy: ±0.012 mm Blade thicknesses: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.35 / 0.40 / 0.45 / 0.50 / 0.55 / 0.60 / 0.65 / 0.70 / 0.75 / 0.80 / 0.85 / 0.90 / 0.95 / 1.00 mm Pieces per set: 20 Special features Conical tip for improved insertion Ring-mounted for organised storage Precision-ground blades Suitable for workshop and inspection use FAQ What measurement range do the blades cover? The blades cover thicknesses from 0.05 to 1.00 mm, provided in fine incremental steps for precise clearance checks with the Metav IndustryLine feeler gauge set. Can these leaves be used for precision assembly and setting tasks? Yes, the long 300 mm blades and a conical tip are intended for assembly and setting tasks that require access to deep joints and consistent thickness verification. How accurate are the blades and what does the stated accuracy mean? The blades are manufactured with an indicated tolerance of ±0.012 mm, which refers to the production tolerance of each leaf and ensures repeatability for routine inspection work. Is the set supplied in a case and how is it stored? The leaves are supplied ring-mounted to keep them organised and readily available; the ring format is designed for convenient workshop storage rather than a transit case. What standard is the manufacturing quality based on? Production follows the stated Werksnorm (factory standard); for traceable certifications or customised calibration services please consult Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set Tapered, 20-Piece 150 mm Length, Ring Mount - Metav IndustryLine
Take advantage of precise gap control and clear blade grading to speed up inspection tasks; the tapered geometry and ring mounting ensure fast selection and reliable insertion into narrow clearances. Order the set directly via Metav Werkzeuge or consult our advisors for batch requirements. Precision feeler gauges M318.020.1 — 20-piece tapered blades, 0.05–1.00 mm (Metav IndustryLine) The Precision feeler gauges M318.020.1 are a ring-mounted set of tapered blades designed for precise gap and clearance measurement in inspection benches and workshop settings. Precision set: 20 tapered feeler blades Range 0.05–1.00 mm in fine increments Ring-mounted for organised storage and quick access Factory standard accuracy of ±0.012 mm Precision where tight tolerances matter This set delivers a clear, graded sequence of blades that simplifies small-gap measurement. The 0.05–1.00 mm range, supplied in fine thickness steps, lets operators select the closest match without resorting to estimation. The blades’ tapered form facilitates insertion into narrow clearances, improving tactile feedback and reducing the risk of overstressing a gap. With a documented accuracy of 0.012 mm, the set supports repeatable checks on assemblies and helps to reduce rework by catching deviations early in the production process. The result is faster inspection cycles and fewer costly adjustments downstream. Faster measurements, fewer handling errors Organisation is an overlooked productivity factor. The ring-mounted format keeps all blades accessible and correctly ordered, so measurement time is reduced and the chance of misplacing gauges is minimised. Blades are sized and labelled for quick identification, enabling technicians to work steadily on series inspections. The construction suits bench-based quality control and fit-up tasks where rapid, reliable verification is required. This pragmatic design supports lean workflows: quicker selection, immediate verification and consistent results across shifts. Built for repeatability and ergonomic use The long 150 mm blade length offers comfortable handling and better control when probing between closely fitted parts. The tapered blades reduce the required insertion force and increase the sensitivity of feel, allowing finer judgement of contact without excessive pressure. Such handling characteristics lower user-induced variation, improving measurement repeatability. The set’s adherence to factory standard (Werksnorm) assures consistent manufacturing tolerances, so each blade behaves predictably in service. Practical benefits for workshop and inspection Beyond raw accuracy, the set provides clear practical advantages: a graduated selection that covers common small-gap needs, easy storage on a retaining ring, and straightforward visual grading for documentation. The compact layout is suitable for toolrooms, maintenance shops and assembly lines where space is at a premium but measurement quality cannot be compromised. For quality managers, the set represents an affordable way to raise the baseline of gap control without complex instrumentation. Choose the tapered 20-blade ring set from Metav IndustryLine for dependable small-gap measurement and contact Metav Werkzeuge in Emmerich for supply details or to discuss batch requirements — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M318.020.1 GTIN: 4054469164687 Customs tariff number: 90173000 Key measurements Measurement range: 0.05–1.00 mm Minimum thickness: 0.05 mm Maximum thickness: 1.00 mm Accuracy: 0.012 mm Blade length: 150 mm Pieces per set: 20 Special features Tapered (conical) blade geometry Ring-mounted set for organised storage Delivered to factory standard (Werksnorm) Blade thicknesses in fine graded steps FAQ What applications suit this feeler gauge set? This precision feeler gauge set is suited to gap and clearance checks in workshops, maintenance, assembly and inspection tasks where small tolerances must be verified quickly. How fine are the individual blade steps? The set covers thicknesses from 0.05 mm to 1.00 mm in graded increments, providing fine resolution for close-fitting parts and precise feel work. Is the set supplied with an accredited calibration certificate? The M318.020.1 set is manufactured to factory standard (Werksnorm). No ISO 17025 calibration certificate is included with this delivery. How does the tapered blade shape help in measurement? The tapered blades allow easier insertion into tight gaps and improved tactile feedback, reducing overpressure and improving the repeatability of fit and clearance checks. Can the ring-mounted set be expanded or reconfigured? The ring-mounted layout is intended for the supplied 20 blades; individual blade replacement or custom configurations can be discussed with Metav Werkzeuge for special orders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set, 13 Blades, Tapered, Ring Mounted, 200 mm Long - Metav IndustryLine
Take advantage of the conical blade geometry and the 0.05–1.00 mm range across 13 finely graduated blades for dependable gap setting and inspection. The 200 mm blade length and ring mounting combine to reduce handling error and keep the set organised; order directly via Metav Werkzeuge or consult our specialists for application advice. Precision Feeler Gauge Set with Ring — 13 Blades, 0.05–1.00 mm · 200 mm (Metav IndustryLine) The Precision Feeler Gauge Set with Ring is a workshop-grade blade set for measuring and setting clearances in assemblies, tooling and inspection tasks where fine incremental control is required Conical blade geometry for precise contact 13-blade set, 0.05–1.00 mm range 200 mm blade length for stable handling Ring-mounted, compact and organised Consistent clearance control for repeatable assemblies The blade selection, spanning 0.05–1.00 mm in fine steps, enables controlled adjustments where small gaps determine function or wear life. Each of the 13 blades is ground to provide a defined thickness, reducing subjective feel during inspection; this supports faster setup and fewer scrapped parts. With a nominal accuracy 0.012 mm, the set is suited to fine mechanical adjustments, contact measurements and final clearance checks in jigs, housings and mating components. The clear graduation of thickness values simplifies documentation and process control in routine quality workflows. Design that improves handling and measurement stability A longer blade length of 200 mm gives improved support and less flex compared with very short feeler strips, making it easier to probe into recesses while retaining dimensional stability. The conical profile at the blade tips facilitates entry into narrow gaps and helps centre the blade for a deterministic contact point, which minimises measurement scatter. The blades are arranged on a ring-mounted carrier that keeps individual leaves secure and readily accessible; the organisation reduces time spent searching for specific sizes and lowers the risk of loss in busy shop environments. Practical integration into inspection and maintenance routines Delivered as a complete set of thirteen leaves, this tool suite is intended for repetitive shop tasks such as valve shim setting, clearance checks on bearings and coupling alignment. The compact, organised format supports lean workshop practice and straightforward inventory control. Build quality and the factory standard (Werksnorm) of manufacture ensure suitability for transfer to toolrooms and maintenance benches where traceable, repeatable checks are part of daily operation. The set’s modest mass and robust construction allow uncomplicated handling during prolonged use. Choose the Metav IndustryLine Precision Feeler Gauge Set with Ring for dependable gap setting and organised storage — contact Metav Werkzeuge for stock status and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: M318.013.2 GTIN: 4054469164663 Manufacturer brand: Metav IndustryLine Numbers / Core Technical Data Blade length: 200 mm Thickness range: 0.05–1.00 mm Number of blades per set: 13 Width: 12.7 mm Mass: 0.13 kg Nominal accuracy: 0.012 mm Designs / Special Features Conical blade profile Ring-mounted set Supplied as a set (13 leaves) Factory standard: Werksnorm FAQ What thickness increments are included in the set? The set comprises thirteen individual blades covering thicknesses from 0.05 mm up to 1.00 mm, graduated to allow fine incremental selection. Is this feeler gauge set suitable for maintenance on gearboxes and engines? Yes, the 0.05–1.00 mm range and the 200 mm blade length make the Metav IndustryLine feeler gauge set suitable for valve clearance, gearbox play checks and similar maintenance tasks. How is the set supplied and organised? The blades are delivered mounted on a ring for safe storage and easy selection; the package is a complete 13-piece set ready for workshop use. What standard governs the manufacturing of this gauge set? The set is produced to a factory standard (Werksnorm) and designed for consistent, repeatable use in industrial and maintenance environments. Can the blades be identified quickly during work? Yes, the clearly graduated thicknesses and ring-mounted arrangement allow rapid identification and retrieval of the required blade. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1 mm Precision Feeler Gauge Set, 20-Piece Tapered Blades 100mm, Special Steel, Werk Standard - Metav IndustryLine
Taking advantage of precise thickness steps, robust special steel blades and a compact 100 mm length, this set supports reliable gap setting and inspection work; order the set directly via Metav Werkzeuge or request tailored advice from our consultants. Precision feeler gauge set M318.020 — 20-piece set, 0.05–1.00 mm blades, 100 mm length (Metav IndustryLine) The Precision feeler gauge set offers repeatable thickness measurement and adjustment for mechanical assembly, valve setup and fine-tuning tasks across workshops and production environments. 20-piece precision blade set Thickness range 0.05–1.00 mm 100 mm blade length for reach Special steel for wear resistance Accurate thickness control for repeatable results This blade set delivers high repeatability through clearly graduated thickness steps from 0.05–1.00 mm, allowing fine adjustments without guesswork. The set is supplied in a coordinated sequence of blades for incremental measurement and shimming tasks; the listed accuracy of ±0.012 mm characterises the manufacturing tolerance of the blades and provides a reliable reference for routine inspection. By replacing estimation with measured values, production variability is reduced and set-up times are shortened, which supports consistent process quality. Robust design and everyday usability in the workshop Constructed from special steel, each blade is engineered to resist wear and maintain edge geometry under regular use. The 100 mm blade length balances reach with control, permitting access to confined joints while remaining easy to handle. The compact, organised format of the set keeps blades aligned for fast selection, and the overall lightweight design (approx. 0.1 kg) makes it simple to carry between workstations. This pragmatic combination of material and form supports dependable measurements across repetitive tasks, increasing operator confidence in day-to-day operations. Clear specification and traceable factory standard The set is manufactured to the declared factory standard, with the thicknesses presented in an ordered progression for quick identification and selection. Labels and the supplied sequence reduce selection errors during setup work, while the compact 100 mm blades suit valve, bearing and shim checks where space is limited. As a purpose-built measurement aid, the kit complements torque and calibration routines and integrates smoothly into routine inspection workflows, offering an efficient, low-complexity means to verify and adjust clearances. Choose Metav IndustryLine reliability — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M318.020 SKU: M318.020 GTIN: 4054469127712 Facts Blade length: 100 mm Thickness range: 0.05–1.00 mm Pieces per set: 20 Weight: 0.1 kg Declared accuracy: ±0.012 mm Standard: Factory standard Tariff number: 90173000 Materials & features Material: Special steel Set composition: 20 individual blades in graduated thicknesses Typical applications: gap measurement, shimming, valve and bearing adjustment Form factor: compact 100 mm blades for confined areas FAQ What thickness steps are included in the set? The set contains 20 individually graduated blades covering the range from 0.05 mm up to 1.00 mm in small increments, enabling precise step selection for shimming and gap checks with the Precision feeler gauge set M318.020. Is this gauge set suitable for valve clearance adjustment? Yes, the 100 mm blade length and fine thickness increments make the set well suited to valve clearance and other engine or mechanical adjustments where precise, repeatable thickness values are required. How durable are the blades under regular workshop use? Blades are made from special steel and designed for wear resistance; with normal handling and correct storage the set provides sustained dimensional stability for routine inspection tasks. Can the set be used for inspection tasks in production environments? The organised sequence, clear thickness graduation and the declared ±0.012 mm tolerance make this kit appropriate as a shop-floor inspection aid and for repeatable setup operations in production. Does the set include a certification or calibration document? The described product is manufactured to a factory standard; specific calibration certificates are not indicated in the product data and are not included by default. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" 12 TPI UNF Go Thread Ring Gauge Right-Hand ANSI/ASME B1.1 2A - Metav IndustryLine
Take advantage of a purpose-built GO thread ring gauge for UNF 1" x 12 that combines conformity to ANSI B1.1, hardened gauge steel construction and a precise 2A tolerance class to secure repeatable thread verification in production and inspection. Order the gauge directly via Metav Werkzeuge or consult the Metav team for technical clarification. GO thread ring gauge UNF 1" x 12 — GO, 2A (Metav IndustryLine) A GO thread ring gauge UNF 1" x 12 for fast verification of external UNF threads to ANSI B1.1 standards, designed for workshop and laboratory quality control ANSI B1.1 / B1.2 compliant gauge Hardened gauge steel construction Tolerance class 2A for GO verification Right-hand thread configuration Reliable verification for external UNF threads The M315.960.F GO thread ring gauge is engineered for straightforward acceptance testing of external threads: conformity to ANSI B1.1/B1.2 and a defined 2A tolerance class ensure that every pass/fail decision rests on established standards. Built as a GO gauge, it confirms that the external thread does not exceed maximum material limits, reducing false rejections and speeding up throughput. This decision-focused approach supports consistent quality control in both workshop and production environments while keeping inspection easy to interpret for operators and inspectors. Robust construction for long-term use Made from hardened gauge steel, the ring is specified for durability and dimensional stability under regular handling. The material choice minimises wear at the thread flanks, so the gauge preserves its reference geometry over many cycles; this supports lower lifecycle costs and reduced recalibration frequency. With a nominal mass of 0.6 kg and a thread pitch 12, the design balances handling comfort and sufficient mass for stable seating during inspection, which is particularly relevant where repetitive checks are required. Practical integration into measurement routines As a dedicated inspection tool for UNF threads, this ring gauge fits directly into established quality routines: it is intended for use on finished parts to confirm thread acceptability prior to assembly or shipment. The clear GO-only function streamlines decision-making and shortens inspection time compared with multi-function gauges, improving line efficiency. Traceability is supported by the visible GTIN 4054469180434 and the manufacturer SKU M315.960.F, enabling simple recording in quality logs and inventory systems. Confidence backed by the Metav supply chain Supplied under the Metav IndustryLine, the gauge benefits from Metav’s role as a quality filter for the European market: consistent stock, transparent order processing and a wide product range for complementary inspection tooling. This provenance provides a reliable procurement route for workshops and inspection labs that require steady availability and documented product specification. The combination of standard conformity, hardened material and clear marking supports both operational reliability and purchasing confidence. Choose the Metav IndustryLine GO thread ring gauge for dependable thread verification and contact Metav Werkzeuge in Emmerich for procurement guidance or technical questions. Technical data Article number: M315.960.F GTIN: 4054469180434 Mass: 0.6 kg Material: gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Thread: UNF 1" x 12 Tolerance class: 2A Right-hand thread Tariff number: 90173000 Facts Pitch: 12 Category: Gauges (inspection) Weight: 0.6 kg Special features GO-only ring gauge Hardened construction for wear resistance Conforms to ANSI B1.1 / B1.2 Marked with GTIN and SKU for traceability FAQ What is the intended use of this GO ring gauge? The GO ring gauge is intended for verification of external UNF threads; the M315.960.F confirms that manufactured threads meet the maximum material limits defined by ANSI B1.1. Which standards does the gauge comply with? Compliance with ANSI/ASME B1.1/B1.2 is specified for the UNF 1" x 12 ring gauge, ensuring measurements align with widely recognised thread standards. What material and durability features does the gauge have? The gauge is manufactured from hardened gauge steel, offering wear resistance for repeated use and stable reference geometry over time. How is the gauge identified for inventory and traceability? The product is marked with SKU M315.960.F and GTIN 4054469180434, supporting straightforward logging in quality systems and stock management. Is this a GO or NOGO gauge? This item is a GO gauge for UNF external threads; it confirms acceptance when the tested part fits within the gauge limits. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNC 8 Tpi Thread No-Go Ring Gauge, Hardened Gauge Steel, ANSI/ASME B1.1 2A - Metav IndustryLine
Precise NO‑GO control for 1 in × 8 tpi UNC external threads and hardened gauge steel construction ensure repeatable inspection and compliance with ANSI/ASME B1.1. Use the gauge to prevent oversize threads and reduce rework. Order the thread ring gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread ring gauge NO‑GO, 1 in × 8 UNC, 2A (Metav IndustryLine) The thread ring gauge NO‑GO, 1 in × 8 UNC 2A verifies that external threads remain within maximum material limits and supports routine inspection tasks in production and workshop environments under ANSI/ASME B1.1. Hardened gauge steel construction ANSI/ASME B1.1 thread standard 2A tolerance class for external threads NO‑GO control for 1 in × 8 tpi UNC threads Consistent, standards‑compliant thread inspection This ring gauge is designed for straightforward, repeatable checks of external UNC threads. The NO‑GO function confirms that a threaded part does not exceed the maximum material condition; if the gauge does not enter, the thread is acceptable. Built to ANSI/ASME B1.1/B1.2 requirements with a 2A tolerance class, the tool provides a clear go/no‑go decision that speeds up quality control and reduces subjective judgement. Using a dedicated ring gauge simplifies inspection routines and shortens cycle times on the shop floor while maintaining traceable conformity. Robust material and handling for everyday workshop use Manufactured from hardened gauge steel, this ring gauge resists wear and keeps dimensions stable over repeated use, which lowers long‑term inspection costs. The compact, hand‑friendly form enables quick checks during assembly and at incoming inspection stations. Its mass and finish provide the rigidity required to avoid false readings caused by deformation, ensuring each measurement remains reliable. The solid construction supports longevity in demanding environments, reducing the frequency of replacements and the associated downtime. NO‑GO control as an efficiency and risk‑reduction measure Employing a NO‑GO thread ring significantly lowers the risk of assembly failure by flagging oversize external threads before parts reach fitting or final assembly. This preventative approach delivers measurable savings: fewer rejected assemblies, reduced rework and faster throughput. The gauge is an uncomplicated, compliance‑focused instrument that complements dimensional checks and statistical process control, giving teams a practical way to enforce tolerances without adding complexity to inspection workflows. For sourcing and expert advice on the Metav IndustryLine NO‑GO thread ring gauge, contact Metav Werkzeuge GmbH—Metav’s team can confirm suitability for specific assemblies and ensure rapid supply to your workshop; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.990 GTIN: 4054469181066 Article: Thread ring gauge NO‑GO, 1 in × 8 UNC, 2A Facts Diameter: 1 in Pitch: 8 tpi Tolerance class: 2A Weight: 0.6 kg Special features Material: hardened gauge steel Standard: ANSI/ASME B1.1 / B1.2 Type: NO‑GO ring gauge Application: external thread inspection Category: Gauges (thread inspection) FAQ What does a NO‑GO ring gauge check? A NO‑GO ring gauge verifies that an external thread does not exceed the maximum material condition; the thread ring gauge NO‑GO, 1 in × 8 UNC 2A must not enter an acceptable thread. Is this gauge compliant with industry standards? Yes, the ring gauge conforms to ANSI/ASME B1.1/B1.2 and is manufactured to meet the specified 2A tolerance for external UNC threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability for consistent inspections over many cycles. Can this gauge be used for production and incoming inspection? The instrument is suitable for both production checks and incoming inspection; the clear go/no‑go condition supports rapid decision making on the shop floor. Which thread size and pitch does this gauge check? This ring gauge is specified for 1 in diameter with 8 tpi (UNC) threads, matching the data stamped on the product. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNC GO Thread Ring Gauge 1×8 TPI ANSI B1.1 2A, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of highly repeatable thread checking, ANSI/ASME conformity and robust hardened gauge steel for reliable inspection cycles; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge UNC GO, 1 in. x 8 TPI (2A) — Go gauge by Metav IndustryLine The Thread ring gauge UNC GO, 1 in. x 8 TPI (2A) is a dedicated Go gauge for quick verification of UNC external threads to ANSI/ASME B1.1 tolerances. Go gauge for UNC 1 in. x 8 TPI Hardened gauge steel construction Made to ANSI/ASME B1.1/B1.2 standards Compact, workshop-ready inspection tool Ensuring repeatable, standards-based thread verification A purpose-built Go ring provides a fast, objective check that an external thread falls within the allowable form limits. Manufactured from hardened gauge steel, this ring is dimensionally stable and resists wear, which preserves inspection repeatability over many cycles. Conformance to ANSI/ASME B1.1/B1.2 ensures the gauge interfaces with common UNC 2A external-thread classes, so the inspection result integrates directly into established QA workflows and documentation practices. Robust design that reduces downtime and handling errors The solid construction of the ring minimises the risk of distortion during handling and inspection, making measurements consistent even under frequent use. The 1 in. x 8 TPI geometry is stamped into the ring and matched to the 2A tolerance class, enabling rapid Go/no‑go decisions without time‑consuming adjustments. Where throughput and operator efficiency matter, a dedicated Go gauge streamlines process control and reduces the likelihood of false rejections, supporting smoother production runs and lower rework rates. Practical integration into inspection routines and traceability As a Go-only ring, this gauge is intended for acceptance checks rather than profile measurement: if the thread fully accepts the Go ring, the external thread meets the intended maximum material condition. The compact form and clear identification (including the SKU and GTIN in technical records) make it straightforward to include the gauge in statistical process control and inspection logs. Marked conformity to recognised standards simplifies audit trails and ensures inspection records are comparable across suppliers and sites. Built for workshop use and long service life Components manufactured from hardened gauge steel are optimised for longevity while retaining the dimensional accuracy necessary for Go checking. The ring’s weight and balanced geometry facilitate controlled handling, helping to avoid accidental over‑engagement or cross‑threading during checks. For operations that require rapid, reliable acceptance testing of UNC external threads, this gauge provides a durable, low‑maintenance solution that keeps inspection simple and effective. For a reliable thread inspection workflow, contact Metav Werkzeuge to discuss Metav IndustryLine gauges and to arrange supply or technical advice tailored to specific production requirements. Technical data Article number: M315.960 GTIN: 4054469180410 Description: Thread ring gauge UNC GO, 1 in. x 8 TPI, 2A Material: Hardened gauge steel Facts Size: 1 in. Pitch: 8 TPI Tolerance class: 2A Weight: 0.6 kg Standard: ANSI/ASME B1.1/B1.2 Special features Go-only ring for external thread acceptance Workshop-ready, durable construction Clearly marked identification for traceability FAQ What is the intended use of this Go ring gauge? The Thread ring gauge UNC GO, 1 in. x 8 TPI (2A) is intended for rapid acceptance checks of external UNC threads to confirm they meet the maximum material condition specified by ANSI/ASME B1.1. Which materials is the gauge suitable for inspecting? The gauge checks thread form regardless of the substrate; it is manufactured from hardened gauge steel to withstand repeated engagement with external threads on components made from common engineering materials. Does the gauge conform to a recognised standard? Yes, the ring is produced to match the dimensions and tolerances of ANSI/ASME B1.1/B1.2 for UNC threads and is designated as a 2A Go gauge for 1 in. x 8 TPI threads. How should the gauge be used in a production environment? Use the gauge as a Go-only acceptance check: the external thread should fully engage the Go ring without forced entry. Record the result in inspection logs; the ring’s marked identification supports traceability in quality documentation. What identification is available for inventory and record-keeping? The product is listed under SKU M315.960 with GTIN 4054469180410, enabling straightforward inventory management and audit traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNC Thread Plug Gauge 1-8 TPI ANSI B1.1 2B, Hardened Gauge Steel - Metav IndustryLine
Take advantage of the combination of standards compliance, hardened gauge steel and precise 2B tolerance for reliable in‑process inspection. Order the gauge directly via Metav Werkzeuge or request technical advice from our consultants. Thread plug gauge UNC 1" x 8 – ANSI/ASME B1.1, tolerance 2B (Metav IndustryLine) The Thread plug gauge UNC 1" x 8 is a precision inspection tool for checking internal Unified threads to the ANSI/ASME B1.1 standard, suitable for workshop and production quality control. Thread size 1" x 8 UNC, 8 tpi Conforms to ANSI/ASME B1.1 standard Hardened gauge steel for wear resistance Tolerance class 2B for internal thread checks Consistent conformity for production inspection The thread plug gauge verifies internal thread form quickly and reliably, supporting the familiar go/no‑go workflow used in routine inspections. Built to the ANSI/ASME B1.1 specification, the gauge confirms basic parameters such as major diameter and pitch, with the 1" x 8 designation indicating the nominal size and 8 threads per inch (8 tpi). This makes the tool an efficient choice for incoming inspection, process control and final checks where reproducible pass/fail decisions are required. Durable construction reduces downtime and rework Manufactured from hardened gauge steel, the device offers high wear resistance, which translates into longer service life and more consistent check dimensions over time. The robust material and heat treatment reduce the frequency of replacement and help maintain repeatability in production environments. Using a gauge with stable surface hardness minimises uncertainty and supports predictable tooling cycles, improving overall process efficiency. Clear tolerancing for unambiguous results Tolerance class 2B denotes the internal thread tolerance band under the Unified Thread Standard and is commonly used for general‑purpose, fit‑controlled components. In practice, a 2B classification provides an established balance between manufacturability and assembly fit, making it suitable for components where reliable thread engagement is required without the need for extreme tightness. The plug gauge simplifies conformity assessment by relating directly to these accepted engineering limits. Seamless integration into quality workflows The gauge is designed for straightforward incorporation into workshop procedures: it is compact, quick to use and lends itself to frequent checks at the machine or inspection bench. Traceability is supported through clear identification (SKU and GTIN in the technical data), which helps when documenting inspection records. For production teams seeking predictable throughput and fewer stoppages, the gauge offers a practical, standards‑based inspection method that complements statistical process control routines. Contact Metav Werkzeuge today for delivery and technical advice on this Metav IndustryLine thread plug gauge — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.930 GTIN: 4054469179773 Mass: 0.45 kg Material: Gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Facts Thread size: 1" x 8 Thread pitch: 8 threads per inch (8 tpi) Tolerance class: 2B Special features Designed for internal thread inspection Wear‑resistant hardened finish Category: Gauges / Plug gauge FAQ What is the primary use of this plug gauge? The plug gauge is intended for rapid verification of internal UNC threads to ANSI/ASME B1.1; it supports simple go/no‑go checks during incoming inspection and in‑process quality control. Which thread size and pitch does the gauge check? This Metav IndustryLine gauge checks a 1" x 8 UNC thread, corresponding to 8 threads per inch (8 tpi). What does tolerance class 2B mean for practical checks? Tolerance class 2B defines the acceptable internal thread tolerance band under the Unified Thread Standard and indicates a common, general‑purpose internal thread fit suitable for most assemblies. Is the gauge suitable for production use and repeated checks? Yes. Made from hardened gauge steel, the gauge is designed for repeated use with enhanced wear resistance to provide consistent pass/fail decisions in production environments. How is the gauge identified for traceability? Identification for documentation is provided via the article number M315.930 and the GTIN 4054469179773, which should be recorded alongside inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNEF Go Thread Ring 1 x 20 TPI Right-Hand, ANSI B1.1/B1.2, Hardened Gauge Steel - Metav IndustryLine
Precision, conformity and durability converge in this hardened gauge‑steel thread ring: compliant with ANSI/ASME B1.1/B1.2, finished to tolerance class 2A, and designed for reliable go/no‑go verification of 1 in × 20 tpi threads. Order the thread ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. UNEF Thread Ring Gauge GO, 1 in × 20 tpi — Metav IndustryLine (Hardened Gauge Steel, ANSI/ASME B1.1) A precision UNEF GO thread ring gauge for go/no‑go verification of 1 in × 20 tpi right‑hand threads in production and incoming inspection. UNEF 1 in × 20 tpi GO thread gauge ANSI/ASME B1.1/B1.2 compliant Hardened gauge‑steel construction Certified conformity for dependable inspection results Certified to ANSI/ASME B1.1/B1.2 and finished to tolerance class 2A, this ring gauge provides a rational basis for acceptance or rejection decisions on threaded parts. The GO gauge confirms that external threads meet the required upper limits for form and size, enabling rapid pass/fail checks on production lines or at goods‑in inspection. By using an industry‑matched standard and a clearly defined tolerance band, measurement uncertainty is limited and documentation requirements for quality systems are simplified. Robust material and geometry for repeatable performance Manufactured from hardened gauge steel, the design prioritises wear resistance and dimensional stability so that calibration intervals are extended and replacement cycles are reduced. The compact design and precise thread form maintain contact over the full flank to ensure consistent engagement during repeat checks. This durability translates into fewer production interruptions and lower lifetime cost of ownership compared with unguided verification methods. Practical benefits in workshop and production workflows Intended for routine thread verification, the gauge suits both workshop test benches and shop‑floor quality stations. The right‑hand UNEF form and a 20 tpi pitch match common imperial threads found in legacy and current assemblies, making the gauge a versatile tool for maintenance, assembly and incoming inspection tasks. Integration into standard operating procedures supports traceable quality control and reduces rework by identifying non‑conforming threads before assembly. For technical guidance or to reserve the Metav IndustryLine UNEF GO ring gauge (M315.960.EF) from our Emmerich stock, contact Metav Werkzeuge for tailored advice by phone or email Technical data Article number: M315.960.EF GTIN: 4054469180427 Label: UNEF Thread Ring Gauge GO, 1 in × 20 ANSI B1.1 / 2A Numerical data Size: 1 in × 20 tpi Pitch: 20 tpi Weight: 0.6 kg Tolerance class: 2A Standard: ANSI/ASME B1.1/B1.2 Special features Material: hardened gauge steel Thread form: UNEF Thread direction: right‑hand thread Application: go/no‑go verification of external threads Category: gauges FAQ What does the GO designation mean for a thread ring gauge? The GO designation indicates that the ring gauge verifies whether an external thread meets the maximum material limits; the UNEF Thread Ring Gauge GO, 1 in × 20 tpi (M315.960.EF) permits parts that fit to be accepted. Which standard and tolerance class does this gauge follow? This ring gauge is produced to ANSI/ASME B1.1/B1.2 and finished to tolerance class 2A, matching common engineering requirements for unified external threads. Can this gauge be used on right‑hand threads only? Yes, the product is specified as a right‑hand thread and is intended for verification of standard right‑hand UNEF external threads. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for high wear resistance and dimensional stability so measurement performance remains reliable over many inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNEF NOGO Thread Ring 1×20 TPI Right-Hand, ANSI B1.1/B1.2 Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel construction and ANSI/ASME B1.1 conformity for reliable thread verification. The combination of standard compliance, a NOGO inspection function and robust material ensures repeatable acceptance testing and fewer downstream defects — order the ring gauge directly via Metav Werkzeuge or consult the specialists for application advice. Thread ring gauge UNEF NOGO, 1" x 20, ANSI B1.1 / 2A by Metav IndustryLine The Thread ring gauge UNEF NOGO, 1" x 20 is a hardened inspection gauge designed to verify external UNEF 1" × 20 right‑hand threads to ANSI/ASME B1.1 tolerances, intended for routine production and incoming inspection. Hardened gauge steel construction Conforms to ANSI/ASME B1.1 standard NOGO ring for 1" x 20 UNEF threads Tolerance class 2A inspection Proven compliance with industry standards for consistent quality The NOGO ring is manufactured to meet ANSI/ASME B1.1 requirements and the 2A tolerance class, providing unequivocal pass/fail assessment during thread inspection. Using a dedicated NOGO gauge removes subjective judgement from the final acceptance step: a properly manufactured external thread will not enter the NOGO ring, which directly translates into fewer non‑conforming parts proceeding through assembly. This standardised approach reduces rework and supports traceable quality control across serial production. Robust materials for long service life on the shop floor Machined from hardened gauge steel, the ring resists wear and preserves the inspection profile over extended use, delivering repeatable measurements across production batches. The material choice and heat treatment ensure dimensional stability despite frequent handling, while the compact 1" size keeps the tool convenient for bench inspection and portable quality stations. The right‑hand thread orientation matches common external fastener use, avoiding confusion during quick checks. Designed to speed up inspection workflows A NOGO ring offers an efficient binary inspection step that integrates easily into incoming goods checks and final inspections. Where gauges are used as a control gate, cycle times shorten and operator training is simplified: operators learn a single go/no‑go criterion instead of interpreting wear‑affected measurement charts. The result is a measurable reduction in inspection time per part and improved throughput without compromising safety or conformity. Practical deployment across production and maintenance Suitable for machine shops, tool rooms and quality departments, this ring gauge supports routine checks on threaded shafts, studs and turned components. The robust construction permits use near production lines and in maintenance stores where quick verification is required before assembly or welding operations. As a dedicated inspection tool, it complements dimensional equipment by providing a fast functional screen for threaded parts. Advice and supply tailored to industrial requirements Metav IndustryLine supplies the ring ready for shop use; complementing services and consultancy are available from the Metav Werkzeuge team to ensure correct implementation in inspection plans. Technical experts can advise on gauge handling, storage and replacement intervals to maintain measurement integrity and to align the tool with existing quality procedures. For assistance with selection, procurement or integration of the UNEF NOGO ring, contact Metav Werkzeuge in Emmerich for specialist advice and supply: +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M315.990.EF GTIN: 4054469181073 Manufacturer: Metav IndustryLine Article name: Gewinde-Lehrring UNEF NOGO, 1 x 20 ANSI B1.1 / 2A Facts Nominal size: 1" Thread pitch: 20 Weight: 0.6 kg Tolerance class: 2A Special features Material: hardened gauge steel Standard: ANSI/ASME B1.1/B1.2 Thread direction: right‑hand thread Eclass: 21170214 Customs tariff number: 90173000 FAQ What does the NOGO designation mean for inspection? The NOGO designation indicates the ring is for no‑go verification: an external thread that enters the NOGO gauge fails the inspection, ensuring only parts within the acceptance envelope are passed. Which standard does this ring follow and why is it important? This ring is manufactured to ANSI/ASME B1.1 and B1.2 guidelines; adherence to these standards ensures compatibility with other standardised components and provides a uniform acceptance criterion across production. Is the material suitable for frequent use in a production environment? Yes, the ring is made from hardened gauge steel, chosen to resist wear and retain the inspection profile under repeated shop‑floor use. Can this gauge be used for left‑hand threads? This specific item is configured as a right‑hand thread NOGO ring; left‑hand variants are a different configuration and must be ordered separately. How is identification handled for ordering and inventory? The SKU for this item is M315.990.EF and the GTIN is 4054469181073, which can be used for procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNEF Thread Go/No-Go Plug Gauge 1×20 TPI Right-Hand, ANSI B1.1/B1.2, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a standards‑compliant thread inspection tool that combines hardened gauge steel, precise UNEF 1" x 20 geometry and a defined 2B tolerance class for dependable in‑process checks; order directly from Metav Werkzeuge or contact our consultants for application advice. Thread Plug Gauge UNEF 1" x 20 (ANSI/ASME B1.1) – 2B, hardened gauge steel (Metav IndustryLine) A Thread Plug Gauge UNEF 1" x 20 2B designed for reliable internal thread verification to ANSI/ASME B1.1 tolerances in workshop and production environments Hardened gauge steel construction Complies with ANSI/ASME B1.1/B1.2 standards UNEF 1" x 20, right‑hand thread, 2B tolerance Precision device for internal thread inspection Ensure conformity with accepted thread standards for faster quality decisions The plug gauge provides a straightforward method to confirm internal thread conformity against ANSI/ASME B1.1/B1.2, eliminating lengthy measurement routines. By checking the UNEF 1" x 20 form against the 2B tolerance class, the device enables rapid go/no‑go decisions and reduces the risk of downstream assembly failures. The clear specification of pitch (20 threads per inch) and tolerance class supports traceable quality documentation and faster batch release, which translates into measurable time savings on repetitive inspections. Durable construction for reproducible results and low life‑cycle cost Manufactured from hardened gauge steel, the gauge resists wear and maintains form accuracy over many inspection cycles. The right‑hand thread geometry is machined to repeatable dimensions, so results remain consistent shift after shift. Robust material choice and professional finishing reduce recalibration frequency and help to keep process interruptions to a minimum; the compact mass of approximately 0.45 kg facilitates safe handling and quick placement in inspection fixtures or tool cabinets. Simple integration into workshop quality routines and ordering processes The plug gauge functions as a direct acceptance tool in production, suitable for bench inspection or as part of a first‑article control routine. Identification via SKU M315.930.EF and GTIN 4054469179780 eases stock management and purchasing workflows. As a precision gauge from Metav IndustryLine, it supports quality systems by providing a tangibleised standard for internal threads; compatibility with common inspection jigs and quick visual acceptance means operators can focus on throughput while maintaining precision. Speak to Metav Werkzeuge in Emmerich to confirm suitability of this Metav IndustryLine thread plug gauge for the intended application and to arrange supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M315.930.EF GTIN: 4054469179780 Manufacturer: Metav IndustryLine Core specifications Size: 1" Thread pitch: 20 TPI Tolerance class: 2B Weight: 0.45 kg Standards: ANSI/ASME B1.1/B1.2 Special features Right‑hand thread Hardened gauge steel Application: internal thread inspection Category: gauges / plug gauge FAQ What thread form does this gauge check? This plug gauge inspects UNEF 1" x 20 internal threads to confirm form and fit. Which tolerance class is represented by the device? The gauge is manufactured to 2B tolerance, suitable for standard internal thread acceptance. Is the gauge suitable for production use on pneumatic assembly lines? Yes, the robust hardened gauge steel construction and repeatable geometry make it appropriate for routine production checks. How can the item be ordered or referenced in stock systems? Order using SKU M315.930.EF or GTIN 4054469179780 for precise identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNF Thread Go/No-Go Ring Gauge 1×12 TPI Right-Hand ANSI B1.1/B1.2, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge steel construction and strict compliance with ANSI/ASME B1.1 to secure consistent thread inspection results; the NOGO function and 2A tolerance class ensure reliable rejection of out-of-spec external threads — order directly via Metav Werkzeuge or consult our specialists if clarification is required. Thread ring gauge UNF NOGO, 1 x 12 ANSI/ASME B1.1 / 2A — Metav IndustryLine thread gauge, 1" × 12 UNF, hardened gauge steel Thread ring gauge UNF NOGO, 1 x 12 ANSI/ASME B1.1 / 2A is a NOGO ring gauge for quick go/no-go verification of external 1" × 12 UNF threads, engineered for production and inspection use Hardened gauge steel for long service life Conforms to ANSI/ASME B1.1 thread standard NOGO ring for 1" x 12 UNF external threads Tolerance class 2A for reliable inspection Ensure thread conformity at every inspection A dedicated NOGO ring provides an unequivocal decision for external thread acceptance: parts that fail the NOGO check are outside allowable limits. Built to the ANSI/ASME B1.1 specification and sized for 1" × 12 UNF threads, this gauge carries a 2A tolerance class, which corresponds to the established external-thread fit system. The clear pass/fail principle speeds up sampling and reduces interpretation errors during inline or bench inspection, improving throughput without sacrificing traceability. Built for repeatable checks and low maintenance Constructed from hardened gauge steel, the gauge resists wear and preserves dimensional integrity over prolonged use. The right-hand thread configuration supports standard production orientations and simplifies handling on the shop floor. With a compact mass of 0.6 kg and a robust design, this ring gauge stands up to frequent use and contributes to fewer recalibrations and less downtime, delivering consistent measurement performance and lower life‑cycle costs. Integrates smoothly into standard quality workflows The ring gauge suits routine acceptance testing, first-article inspection and sampling plans in machine shops and quality departments. Its binary nature—accept or reject—means operators can make fast, objective decisions, reducing subjective interpretation and improving reproducibility across shifts. Supplied by Metav IndustryLine and tracked under SKU M315.990.F, the gauge supports compliant processes and clear documentation trails for audit purposes. Discuss inspection needs with Metav Werkzeuge — request technical advice or the Metav IndustryLine M315.990.F UNF NOGO ring gauge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930, and secure a reliable inspection tool for your production line Technical data Article number: M315.990.F GTIN: 4061905047800 Manufacturer: Metav IndustryLine Facts Size: 1" Pitch: 12 tpi Tolerance class: 2A Weight: 0.6 kg Standard: ANSI/ASME B1.1/B1.2 Special features Material: gauge steel, hardened Right-hand thread Function: NOGO ring gauge Category: Gauges / Thread gauges FAQ What is the purpose of a NOGO ring gauge? A NOGO ring gauge is used to reject external threads that exceed the maximum material condition; the Metav IndustryLine NOGO ring gauge prevents out‑of‑tolerance parts from progressing in production. Which thread standard does this ring gauge follow? The ring gauge is manufactured to ANSI/ASME B1.1/B1.2, ensuring compatibility with standard UNF thread specifications for 1" × 12 threads. What does tolerance class 2A mean for inspection? Tolerance class 2A denotes the external thread tolerance grade used for the gauge; it defines acceptable dimensional limits for the external thread being inspected. Is the material suitable for heavy shop use? Yes, the gauge is made from hardened gauge steel, which provides wear resistance and longevity for frequent use in production and inspection environments. How is the Metav IndustryLine M315.990.F identified in documentation? The gauge is listed under SKU M315.990.F and GTIN 4061905047800 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1" UNF Thread Plug Gauge 1x12 TPI ANSI B1.1 2B, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a gauge that combines strict ANSI compliance, hardened gauge steel construction and a precise tolerance class 2B fit for reliable production control; order or request advice directly from Metav Werkzeuge for seamless integration into inspection workflows. Thread plug gauge 1" x 12 UNF — ANSI/ASME B1.1 / 2B (Metav IndustryLine) A thread plug gauge 1" x 12 UNF designed for checking right-hand internal UNF threads to ANSI/ASME specifications in production and inspection environments Right-hand UNF thread, 1" x 12 tpi Hardened gauge steel for wear resistance Tolerance class 2B to ANSI/ASME B1.1 Suitable for production inspection Consistent conformity to ANSI standards for worry-free checks The gauge is manufactured to the ANSI/ASME B1.1/B1.2 thread form and supplied in a tolerance class 2B, ensuring that internal threads meet common US Unified National Fine (UNF) fit specifications. Using a dedicated thread plug gauge for go/no-go evaluation removes ambiguity from quick inspection routines and reduces downstream rework. The familiar 1" × 12 tpi geometry allows direct substitution into established inspection plans and holds up under frequent use thanks to the hardened construction. This combination of standard conformity and robust material reduces audit friction and supports traceable quality procedures. Built for repetitive use: durability and dimensional stability Constructed from hardened gauge steel, the tool resists wear and maintains dimensional integrity over repeated engagement cycles, which is essential when gauges are operated on the shop floor several times a shift. The right-hand thread orientation is standard for most UNF applications; the plug design provides a tactile pass/fail confirmation that is both fast and unambiguous. By specifying a gauge with a defined tolerance class 2B, inspection throughput improves because acceptance criteria are clear and repeatable, helping to lower scrap rates and improve process capability metrics in batch production. Practical integration into workshop and QA routines The plug gauge is optimised for use directly at the point of manufacture or within a control bench: it supports quick verifications after tapping operations and during incoming inspection of purchased components. As a compact metrology tool, it fits into existing gauge sets and racks and pairs well with complementary checks such as thread ring gauges or profilometry where required. The simple go/no-go principle that this type of gauge applies makes it an efficient first line of defence in quality assurance, enabling technicians to identify issues immediately and escalate for corrective action when necessary. Request a technical consultation or a supply recommendation from Metav Werkzeuge GmbH — Metav IndustryLine gauges are supported from our Emmerich hub and technical advice is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.930.F GTIN: 4054469179797 Weight: 0.45 kg Material: Gauge steel, hardened Thread: UNF 1" × 12 tpi, right-hand Tolerance class: 2B Standard: ANSI/ASME B1.1/B1.2 Tariff number: 90173000 Facts Diameter: 1" Pitch: 12 tpi Weight: 0.45 kg Tolerance class: 2B Special features Right-hand thread Hardened gauge steel for wear resistance Intended use: production and inspection Categories: Measuring pins, Gauges FAQ What thread form and size does this gauge check? The thread plug gauge 1" x 12 UNF (Metav IndustryLine, SKU M315.930.F) verifies internal UNF threads with 1" diameter and 12 threads per inch in accordance with ANSI/ASME B1.1 Which tolerance class is used and what does it mean? Tolerance class 2B denotes the standard internal thread tolerance for UNF fittings; the gauge confirms that internal threads fall within the accepted limits for assembly and fit Is this gauge suitable for shop-floor production checks? Yes — the hardened gauge steel construction and go/no-go plug format make the gauge suitable for repetitive production inspection and quick acceptance testing What standards does the gauge comply with? Compliance is to ANSI/ASME B1.1/B1.2, ensuring compatibility with common UNF thread specifications used in manufacturing and assembly Can the gauge be used alongside other thread inspection tools? The gauge integrates easily with existing inspection sets and complements ring gauges or more advanced dimensional checks when additional verification is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1-25mm Precision Gauge Ball Set 50 Pieces Hardened Steel HRC 60 ±2, Supplied in Case - Metav IndustryLine
Combining hardened steel construction, 0.0025 mm accuracy and a full 50‑piece size range delivers consistent reference measurements for inspection and fixture set‑up. Order the set directly via Metav Werkzeuge or consult their technical team for application support. Gauge Ball Set M318.511 — hardened steel, 1–25 mm, 50 pieces Gauge Ball Set M318.511 provides a complete collection of precision reference spheres for inspection, calibration and go/no‑go checks in workshops and quality labs. Hardened steel, 60 ±2 HRC 0.0025 mm accuracy for precise checks 50-piece set, sizes 1–25 mm, double each Compact, organised set for workshop use Consistent reference accuracy that speeds up inspection The set is designed for reliable dimensional checks and reference tasks where repeatability matters. With an indicated accuracy of 0.0025 mm, the spheres serve as stable reference points for comparative measurements, runout checks and tactile gauge inspections. The precision class reduces measurement scatter and helps to lower rework rates by ensuring a dependable baseline during incoming inspection and in‑process checks. Hardened construction for durable, long‑term use Manufactured from hardened steel and specified at 60 ±2 HRC, the spheres resist indenting and wear during regular use. This material choice preserves the spherical form and dimensional integrity even under repeated contact with fixtures and measuring instruments. The combination of wear resistance and balanced hardness makes the set suitable for routine shop use as well as for bench calibration tasks, extending the usable life of the reference set and protecting measurement investment. Practical set composition for everyday workflows Delivered as a 50‑piece set with two units per nominal size from 1 mm to 25 mm in 1 mm steps, the collection supports quick selection for both micro and small‑component applications. The paired sizing enables cross‑checks and immediate verification of measurement chains. At a total mass of 1.3 kg, the set is portable while remaining robust enough for stable handling; the organised layout helps to keep the spheres accessible and reduces time spent searching for the correct diameter during production or inspection routines. Contact Metav Werkzeuge today for application guidance and to secure the M318.511 gauge ball set with hardened, high‑precision spheres Technical data Article number: M318.511 GTIN: 4054469164366 Material: Steel, hardened Set contents: 50 pieces, two per size (1–25 mm) Facts Accuracy: 0.0025 mm Sizes: 1–25 mm Step size: 1 mm Pieces per set: 50 Weight: 1.3 kg Tariff number: 90173000 Special features Hardness: 60 ±2 HRC Two spheres per nominal size for verification ECLASS: 21170133 FAQ What accuracy can be expected from the gauge ball set? The gauge ball set M318.511 is specified with an accuracy of 0.0025 mm, suitable for fine inspection and comparative checks in workshop and laboratory environments. Which sizes are included in the set? The set contains 50 spheres covering sizes 1 mm to 25 mm in 1 mm increments, with two pieces supplied for each nominal diameter. What material are the spheres made from and how hard are they? The spheres are made from hardened steel and specified at 60 ±2 HRC, offering wear resistance for regular measurement tasks. Is the M318.511 suitable for calibration and reference use? Yes — the dimensional accuracy and hardened construction make the M318.511 gauge ball set appropriate as a reference for routine calibration checks, fixture set‑up and go/no‑go verifications. How portable is the complete set? With a total weight of approximately 1.3 kg, the set is compact and portable for use at different workstations while remaining substantial enough for stable handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com