Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1.16mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of ±0.001 mm repeatability combined with a 1.16 mm diameter and 50 mm length for precise end‑measure verification; rely on robust workshop construction and rapid part checks. Order the test pin directly via Metav Werkzeuge or consult our metrology advisers for application support. M323.116 Gauge pin — 1.16 mm, ±0.001 mm (Metav IndustryLine) The M323.116 gauge pin is a workshop‑grade precision inspection pin for end‑measure checks and tight‑tolerance verification in micro‑assembly and production inspection. Workshop‑grade construction Diameter 1.16 mm, ±0.001 mm Length 50 mm for deep access Special steel for dimensional stability Precision tailored for micro components Small components demand predictable results. With a declared tolerance of ±0.001 mm and a nominal diameter of 1.16 mm, this gauge pin delivers micrometre‑level certainty for end‑measure applications. The dimensional rating corresponds to the micro category of inspection tools, where compact form and low flex are essential. This accuracy reduces sorting time and lowers the risk of false rejects during go/no‑go checks, improving throughput in fine‑mechanical production and laboratory verification. Robust workshop build for repeatable checks Designed as a workshop edition, the pin is manufactured from special steel to maintain form under regular handling and to resist minor surface wear. The 50 mm length offers access into bores and recessed features while keeping the profile stiff enough for hand‑guided measurements. The simple single‑piece design supports repeatable seating against reference surfaces and can be used as a fixed gauge in fixtures or as a movable inspection probe during manual quality control routines. Easy integration into inspection workflows Traceable identification and a compact footprint make this pin straightforward to log into inspection plans and tool tables. Its small diameter and tight tolerance suit applications such as end‑measure verification of turned parts, pin gauges for assembly jigs, or as reference elements in tactile measuring fixtures. Metav’s extensive metrology range and technical documentation support consistent adoption across workshops and production lines, helping to democratise precision without compromising reliability. Contact Metav Werkzeuge for tailored advice on the M323.116 gauge pin and to discuss compatibility with existing inspection processes at the Emmerich site. Technical Data Article number: M323.116 GTIN: 4061905054372 Label: Test pin, single, 1.16 mm, ±0.001 mm, length 50 mm Dimensions & performance Diameter: 1.16 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Features & materials Material: special steel Version: workshop edition Intended use: end‑measure inspection Category: gauge pins FAQ What tolerance does the gauge pin offer? The M323.116 gauge pin is specified at ±0.001 mm, suitable for micrometre‑grade verification. What are the material and length of the pin? The M323.116 is made from special steel and measures 50 mm in length. Which applications suit this gauge pin? This pin is intended for end‑measure checks, tight‑tolerance inspections, assembly jigs and micro‑component verification. Is the item supplied singly or in a set? The product is supplied as a single gauge pin for flexible use in bespoke inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.17mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, sub‑micron accuracy and compact handling for reliable end‑measure checks; the compact 1.17 mm diameter pin with ±0.001 mm tolerance and 50 mm length supports consistent inspection routines. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.117 gauge pin — 1.17 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.117 is a single gauge pin designed for precise end‑measure and go/no‑go checks in workshop and production metrology. Tolerance ±0.001 mm Precision diameter 1.17 mm 50 mm length, workshop version Manufactured from special steel Repeatable accuracy for decisive inspection steps The compact gauge pin delivers a defined reference diameter of 1.17 mm with an accuracy of ±0.001 mm, making it suitable for final dimension verification and pin‑gage checks where small variances matter. The tight tolerance reduces uncertainty during comparative measurements and supports faster decision making on acceptance or rework. Emphasis on measurable performance ensures that inspection routines remain efficient and consistent across batches. Robust workshop design for everyday handling Constructed in special steel and issued as a workshop version, the pin resists everyday wear while retaining its measurement fidelity. The 50 mm shaft provides a practical balance between reach and rigidity for handheld insertion or fixture use, and the compact mass keeps handling straightforward during repetitive tasks. Supplied in a transport case to protect the pin in transit, the design minimises the risk of accidental damage before deployment. Traceability and straightforward integration into quality workflows Marked and catalogued for shop‑floor use, this type of precision pin fits into standard inspection sequences and gauge sets, aiding process documentation and lot tracking. The low mass and precise diameter simplify fixture design and allow stable positioning in gauges or comparator rigs, contributing to repeatable measurements and reproducible outcomes. The combination of defined geometry and workshop robustness makes the component a practical element in both routine quality checks and assembly verification. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for purchasing and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific inspection tasks. Technical data Product: Gauge pin, single SKU: M323.117 GTIN: 4061905054389 Facts Diameter: 1.17 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Workshop version Material: special steel Supplied in transport case (plastic or wooden) Suitable for end‑measure checks FAQ What dimensional accuracy can be expected from this gauge pin? The M323.117 gauge pin is specified at ±0.001 mm accuracy, providing sub‑micron repeatability suitable for precise end‑measure verification. Which applications are typical for a 1.17 mm gauge pin? Typical uses include final inspection of bores and pin gauges, comparator checks and assembly verification where a defined small diameter is required. Is the pin protected during delivery? Yes, the gauge pin is supplied protected in a transport case to prevent handling damage before it reaches the workshop. Can this gauge pin be used in a handheld comparator or fixed fixture? The 50 mm length and compact mass make the pin suitable for both handheld comparator work and secure mounting in small fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.18mm Precision Gauge Pin ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from sub‑micrometre repeatability, the slim 1.18 mm diameter and a robust 50 mm measuring length for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or contact our advisors for application guidance. Metav IndustryLine Gauge Pin M323.118 — 1.18 mm, ±0.001 mm The Gauge Pin M323.118 is a single precision test pin designed for accurate end‑measurements and reference checks in workshop inspection and fixture set‑ups. ±0.001 mm tolerance for sub‑micron accuracy Precision ground 1.18 mm diameter 50 mm effective measuring length Workshop‑grade special steel construction Stability through measured precision The core advantage of this test pin is its ±0.001 mm (1 µm) tolerance, which yields highly reproducible results when used as a reference or stop in inspection routines. Such a fine tolerance reduces measurement scatter and makes control charts more reliable; this is particularly relevant where tight end‑measurements determine part acceptance. The slim 1.18 mm diameter is precision‑ground to ensure concentricity and surface quality, so pin seating and repeatability are improved compared with rougher reference points. Robust design for everyday workshop use Constructed from special steel, the component combines wear resistance with dimensional stability under normal workshop conditions. At an effective 50 mm length the pin offers a balance between reach and rigidity, helping to avoid bending or fretting during insertion and removal. The workshop‑grade finish is optimised for handling and prevents accidental corrosion in standard environments, which extends service life and reduces the need for frequent replacements. Easy integration into inspection and assembly workflows Supplied as a single test pin, the item is suited to use as a gauge for end‑measurements, fixture datum pins, or as a reference for setting up mandrels and plug gauges. Integrating the pin into a measuring routine simplifies traceability: repeated contacts with a defined, precision‑ground surface reduce operator‑dependent variation and help shorten inspection cycles. The compact geometry also supports use in confined assemblies where a larger reference would be impractical. Secure the Metav IndustryLine gauge pin M323.118 with ±0.001 mm accuracy through Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and supply options Technical data Article number: M323.118 GTIN: 4061905054396 Label: Prüfstift, einzeln, 1,18mm, +/- 0.001 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 1.18 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Delivery form: single test pin Intended use: end‑measurements / reference pin Version: workshop execution FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.118 from Metav IndustryLine provides an accuracy of ±0.001 mm, making it suitable for sub‑micrometre reference tasks and tight inspection tolerances. Which applications is this test pin suitable for? This precision test pin is intended for end‑measurements, fixture datum points and reference checks in workshop inspection and assembly environments. What is the material and how does it affect wear? Manufactured from special steel, the pin is designed for improved wear resistance and dimensional stability in standard workshop conditions. Is this item supplied individually or in sets? The product is supplied as a single test pin (single delivery form) ideal for direct use in inspection benches or individual fixture integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.19mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of sub-micron accuracy, a compact Ø 1.19 mm profile and robust workshop design for reliable end‑measure checks and repeatable alignment. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single (M323.119) – Ø 1.19 mm, ±0.001 mm, 50 mm by Metav IndustryLine Gauge pin M323.119 is a precision reference pin for end‑measure inspections and fixture alignment in workshop environments High precision ±0.001 mm Diameter Ø 1.19 mm for fine gauges Length 50 mm for deep checks Workshop-grade special steel Measure with sub-micron certainty for critical end dimensions The pin delivers ±0.001 mm accuracy, a level that corresponds to a 1 µm tolerance and supports demanding end‑measure inspections where repeatability is essential. This accuracy reduces measurement uncertainty and helps maintain process stability during batch production or quality checks. As a compact reference element, the pin is suitable for precise diameter verification, profile checks and alignment tasks where a clearly defined contact point is required. The design emphasises measurable benefit: fewer ambiguous readings and faster pass/fail decisions on the shop floor. Robust construction and workshop readiness for everyday use Manufactured from special steel and specified as a workshop version, the pin balances hardness with corrosion resistance to withstand regular handling and insertion into gauges or jigs. Its 50 mm length provides sufficient reach for recessed features while the Ø 1.19 mm diameter keeps contact areas small and repeatable. Delivery in a transport box preserves the finish and protects the reference surface during storage and shipment, ensuring the component arrives ready for immediate use. Low mass supports careful handling and minimises impact forces during measurement. Practical applications that streamline inspection workflows Ideal for end‑measure checks, small‑bore verification and fixture set‑up, the pin serves as a compact reference for inspection benches and manual gauge systems. Using a stable reference pin simplifies comparative checks and reduces setup time when aligning fixturing or validating mating parts. The straightforward geometry makes integration into visual routines and dimensional records easy, supporting traceable inspection documentation where a defined reference diameter is required. The combination of fine diameter and high accuracy is particularly useful for microcomponents and precision assemblies. For workshop-ready precision from Metav IndustryLine (SKU M323.119), request this gauge pin via Metav Werkzeuge in Emmerich and consult our specialists for application-specific advice Technical Data SKU: M323.119 GTIN: 4061905054402 Weight: 0.003 kg Length: 50 mm Diameter: 1.19 mm Accuracy: ±0.001 mm Material: Special steel Feature: Workshop version Facts Tolerance class: 0.001 mm (1 µm) Mass: 0.003 kg Nominal diameter: 1.19 mm Nominal length: 50 mm Special features Delivery in transport box (plastic or wooden) Intended use: end‑measure checks and fixture alignment Design: single gauge pin for inspection and verification FAQ What material is the pin made from? The pin is made from special steel; the Metav IndustryLine gauge pin (SKU M323.119) is specified for workshop durability and resistance to routine handling. What accuracy can be expected from this gauge pin? Accuracy is stated as ±0.001 mm (1 µm), providing sub‑micron repeatability suitable for critical end‑measure checks with the Metav IndustryLine pin. Is the pin supplied ready for use or does it require preparation? The pin is supplied protected in a transport box and ready for immediate use in inspection tasks; the finish and tolerance are preserved for direct application. Which inspection tasks are best suited to this pin? Typical applications include end‑measure checks, small‑bore verification and fixture alignment where a defined reference diameter of 1.19 mm is required. Does the product include a certificate or calibration document? No ISO 17025 statement is provided in the product data; calibration documentation is not specified for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.2-6.5mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of the combination of clear pass/fail identification, compatibility with a wide range of measuring pins, and a compact, lightweight design to speed up shop‑floor inspection routines. Order the measuring pin holder directly via Metav Werkzeuge or ask our consultants if needed. Measuring Pin Holder M318.562 — for measuring pins 1.2–6.5 mm with 'Good'/'Reject' indication (Metav IndustryLine) The Measuring Pin Holder M318.562 is a compact gauge accessory designed to accept measuring pins from 1.2–6.5 mm, providing immediate visual Good and Reject marking for quick go/no‑go decisions in production inspection. Accepts measuring pins 1.2–6.5 mm Integrated Good / Reject marking Compact 125 mm length Lightweight 0.1 kg Faster decisions with visible pass/fail marking The holder's integrated Good and Reject indication removes ambiguity from routine checks, turning measurement results into immediate action. Fitted into assembly lines or test benches, the accessory reduces interpretation time for operators and supports a consistent inspection workflow. Its simple marking system complements digital or manual gauges, ensuring that a measured value results in an unambiguous status cue, which is especially valuable during volume production or end‑of‑line checks. Robust, compact design for repeatable handling Engineered as a compact fixture at 125 mm, the device is easy to position in jigs and portable test rigs while retaining the stability needed for repeatable checks. At 0.1 kg, it is light enough for handheld use yet rigid enough to hold pins securely during measurement. These attributes help maintain repeatability across frequent cycles, reducing rework and enabling faster cycle times without compromising measurement integrity. Universal compatibility and practical workshop benefits Designed to accept measuring pins from 1.2–6.5 mm, the holder fits a broad range of standard pin gauges used across metalworking and inspection tasks. The straightforward fixture concept minimises setup time and training effort: interchangeable pins can be seated quickly, and the visible status marking integrates into existing quality routines. Supplied as a ready‑to‑use gauge accessory from Metav IndustryLine, it supports efficient quality control where clear visual indication and simple handling matter most. Contact Metav Werkzeuge today to request a quotation for the M318.562 measuring pin holder or to discuss which pin sizes and marking configurations best suit current inspection needs at your facility. Technical data Article number: M318.562 GTIN: 4054469167138 Weight: 0.1 kg Length: 125 mm Tariff code: 90173000 Facts Category: Messstifte / Gauges Compatibility: measuring pins 1.2–6.5 mm Brand: Metav IndustryLine Label: Measuring pin holder with Good / Reject marking Special features Visual Good / Reject identification Compact, low‑weight construction Suitable for workshop and bench inspection Category path: Messstifte; Lehren FAQ What pin diameters does the holder accept? The holder is compatible with measuring pins from 1.2–6.5 mm, allowing flexible use with common pin gauge sets. Is the M318.562 suitable for use on test benches and jigs? Yes, the M318.562’s compact 125 mm length and lightweight build make it well suited for fixed jigs and portable test benches. Does the holder indicate pass and fail visually? The accessory includes clear Good and Reject marking to provide immediate visual pass/fail indication during inspection. Which brand manufactures this measuring pin holder? This holder is supplied under Metav IndustryLine and distributed by Metav Werkzeuge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.21mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine workshop-ready robustness with submicrometre accuracy: the compact 1.21 mm diameter and ±0.001 mm tolerance ensure reliable end-dimension verification in micromechanics and small-part inspection; order the pin via Metav Werkzeuge or consult our specialists for application advice. M323.121 Gauge Pin (single) — 1.21 mm, ±0.001 mm, 50 mm The M323.121 Gauge Pin (single) is an ultra-compact, workshop-grade precision pin for end-dimension checks and micromechanical inspection. Diameter 1.21 mm, high-precision fit Tolerance ±0.001 mm for repeatable checks Workshop‑grade special steel construction Supplied in a protective transport case Accuracy that reduces uncertainty and rework The main strength lies in the ±0.001 mm specification, which delivers a degree of repeatability suitable for demanding end‑dimension controls and plug‑gauge comparisons. A tolerance of this order minimises ambiguous readings and supports consistent go/no‑go decisions on the production line. By using a dedicated, small‑diameter pin the risk of misalignment is reduced, so inspection cycles become more predictable and non‑conforming parts are detected earlier. The compact geometry also lends itself to fine fixtures and measuring nests used in micromechanical assembly. Built for daily workshop use and secure transport Constructed from special steel and finished as a workshop‑grade item, this gauge pin balances wear resistance with practical handling. The 50 mm shaft length offers enough reach for most small‑part checks while remaining easy to manoeuvre by hand or in a fixture. Delivery includes a protective transport case, designed to protect the pin during storage and transit; the case is intended for transport protection rather than permanent workshop storage. These design choices reduce the likelihood of damage and preserve the calibrated condition of the pin between uses. Integrates smoothly into inspection routines Compact, lightweight and precise, the pin is suited to inline quality checks, bench inspection and validation of end dimensions on turned or milled components. The small mass and consistent geometry make it straightforward to use in automated test nests or alongside manual gauging operations. Traceability is supported by the clear article and identification data, helping to document which instrument was used for a given measurement. As a standard workshop tool, it complements broader Metav IndustryLine offerings and fits into procurement strategies that favour repeatable quality and dependable supply. For dependable micro‑gauging in workshop environments, request the M323.121 from Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for implementation guidance and order placement Technical Data Article number: M323.121 GTIN: 4061905054426 Brand: Metav IndustryLine Designation: Gauge pin, single 1.21 mm Facts Diameter: 1.21 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop version Material: Special steel Supplied in protective transport case Category: Gauge pins FAQ What measurement tasks is this pin intended for? The M323.121 gauge pin is designed for end‑dimension verification and precise go/no‑go checks on small mechanical parts where a 1.21 mm diameter reference is required. How tight is the manufacturing tolerance? Manufactured to a tolerance of ±0.001 mm, the pin provides submicrometre repeatability suitable for micromechanics and critical small‑part inspection. Is the pin supplied ready for use in a workshop environment? Yes, the workshop‑grade construction and the supplied protective transport case mean the pin arrives ready for routine use and safe handling in production or inspection areas. Can this pin be used in automated fixtures? The compact geometry and low mass make the pin suitable for use in automated test nests or mounted fixtures for high‑throughput checking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.22mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of sub‑micron repeatability and a compact 50 mm length for reliable end‑measurement tasks; the workshop‑grade construction in special steel ensures practical robustness while the supplied protective transport case keeps each pin safe. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.122 — single gauge pin, 1.22 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Gauge pin M323.122 is a single, workshop‑grade test pin designed for precise end measurements and fixture verification in compact inspection routines Single gauge pin, diameter 1.22 mm Tolerance ±0.001 mm for high precision 50 mm special steel length Supplied in protective transport case Sub‑micron accuracy for dependable inspection results The pin delivers an exceptional ±0.001 mm tolerance, which corresponds to one micrometre repeatability — a level of precision that supports tight inspection criteria and dimensional verification. Such accuracy reduces measurement uncertainty when comparing parts to master gauges or setting up plug checks, so deviations are detected early in the process. The fine diameter allows measurement and gauging of small bores and precision features where standard probes are too large. Durable workshop design and ergonomic handling Manufactured from special steel and specified as a workshop version, the pin balances wear resistance with everyday usability. The 50 mm length provides enough engagement for stable seating in fixtures while remaining compact for handheld checks or toolroom benches. The slim profile minimises interference inside tight geometries, and the overall design supports fast, repeatable checks without complex fixturing. Practical integration into quality workflows Intended for end‑measurement tasks and fixture validation, this single gauge pin fits into common metrology routines for component verification and jig set‑up. The item is supplied in a protective transport case to prevent damage in transit and storage. For bespoke testing plans or integration into existing gauge sets, the Metav IndustryLine M323.122 can be specified alongside complementary pins to form matched sets for serial inspection. For reliable micro‑measurement tools from Metav IndustryLine, contact Metav Werkzeuge GmbH for ordering and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.122 GTIN: 4061905054433 ECLASS: 21170231 Category: Messstifte (gauge pins) Facts Diameter: 1.22 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Supplied in a protective transport case (plastic or wooden) Intended for end measurements and fixture verification FAQ What level of precision does this pin provide? The M323.122 gauge pin offers a tolerance of ±0.001 mm, making it suitable for micro‑precision checks and fine dimensional comparisons in the workshop. Which materials is the pin suited for measuring or checking? As a gauge pin, the M323.122 is used for dimensional verification of machined components regardless of base material; it is a non‑cutting checking instrument rather than a tool for material removal. Is the pin delivered ready for use and protected during transport? Yes, the M323.122 from Metav IndustryLine is supplied in a protective transport case to prevent handling damage and to keep the measuring surface clean during storage and transport. Can the pin be combined with other gauges for serial inspection? The single gauge pin M323.122 can be matched with additional pins to create sets for serial inspection, enabling stepped checks, fixture alignment and comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.23mm Gauge Pin Length 50mm ±0.001mm, Workshop Finish - Metav IndustryLine
Take advantage of the combination of pinpoint accuracy and compact design to ensure repeatable end‑measure checks and reliable workshop use; order directly via Metav Werkzeuge or consult the Metav team for tailored metrology support. Gauge pin M323.123 — 1.23 mm diameter, ±0.001 mm accuracy A Gauge pin M323.123 designed for precise end‑measure checks and fixture verification in workshop metrology *±0.001 mm accuracy for repeatable checks *1.23 mm diameter in hardened special steel *50 mm length for access to recessed features *Workshop version for robust everyday use Accuracy that removes doubt from routine checks The core advantage of this gauge pin is its ±0.001 mm specification, which translates into dependable repeatability for small‑feature inspection and go/no‑go verifications. In practical terms, the extremely tight tolerance reduces measurement scatter and shortens decision cycles during quality control. The small diameter of 1.23 mm makes the pin suitable for verifying tiny bores, locating holes and acting as a reference in assembly fixtures, while the documented accuracy provides a quantifiable basis for process control and traceable measurement results. Designed for consistent handling and accessibility Manufactured from special steel, the pin combines surface hardness with dimensional stability so that routine contact with fixtures and gauges does not alter the reference geometry. At a 50 mm length the component reaches into deeper or recessed features without compromising rigidity, yet remains light at 0.003 kg for safe, one‑hand handling. The workshop variant is intended for everyday industrial use: it balances wear resistance with straightforward integration into pin holders, mandrels or bespoke jigs, helping to maintain cycle times and reduce setup variability. Practical integration into inspection and assembly workflows As a single precision measuring pin, the item functions as a reference element for end‑measure readings, alignment aids and comparative checks. The compact form factor suits fine mechanical environments where space is limited but accuracy cannot be traded off. Where traceability is required, the clear specification of diameter, length and tolerance supports inclusion in inspection plans and documentation. For teams implementing lean metrology routines, the pin offers a simple, low‑intervention means to stabilise repeated checks and to corroborate results from calipers or microscopes when verifying small features. Contact Metav Werkzeuge for expert advice on using the Metav IndustryLine gauge pin in your inspection setup and to arrange supply directly from Emmerich Technical Data Article number: M323.123 GTIN: 4061905054440 Brand: Metav IndustryLine Category: Messstifte Facts Diameter: 1.23 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Variant: workshop execution ECLASS: 21170231 Label: Prüfstift, einzeln, 1,23mm, +/- 0.001 mm Länge 50 mm FAQ What is the intended use of this gauge pin? The gauge pin M323.123 is intended for precise end‑measure checks, locating small bores and use as a reference element in fixtures. How precise is the measuring pin in practical terms? With a specified tolerance of ±0.001 mm, the M323.123 gauge pin provides repeatable dimensional references for high‑precision workshop inspections. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for hardness and dimensional stability so that the reference surface remains consistent under normal workshop usage. Can the pin be used with standard pin holders and mandrels? Yes, the single gauge pin is compatible with common holders and can be integrated into mandrels or bespoke jigs for alignment and verification tasks. How does the 50 mm length affect its application? The 50 mm length allows access to recessed or deeper features while maintaining sufficient rigidity for reliable measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.24 mm Gauge Pin, Single, ±0.001 mm, Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance and compact length for reliable plug‑gauge checks in routine workshop metrology. The highly repeatable diameter and workshop execution support efficient throughput and low rework rates. Order directly through Metav Werkzeuge or consult the Metav team for specification matching. Test pin, single, 1.24 mm (M323.124) — Gauge pin with ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) A Test pin, single, 1.24 mm, ±0.001 mm, 50 mm length designed for precise go/no‑go checks and end‑measurement tasks in workshop and inspection environments Ultra‑fine tolerance ±0.001 mm Diameter precisely 1.24 mm Length optimised at 50 mm Made from special steel Precision that reduces uncertainty on the shop floor The small diameter combined with a ±0.001 mm tolerance makes this gauge pin ideal where tight fit checks or end‑measurements decide acceptance. As a compact inspection tool, the pin delivers consistent contact geometry and repeatability in serial checking, reducing the need for time‑consuming rework. In practice, this precision translates into fewer false rejects and a clearer pass/fail decision for small bores and alignment points. Robust material and workshop specification for everyday use Manufactured from special steel and offered in a workshop execution, the pin balances surface hardness with corrosion resistance to withstand handling and repeated insertion cycles. The 50 mm working length gives sufficient engagement for most small‑part inspections while remaining easy to position by hand or in fixtures. The build supports stable results across multiple checks without exaggerated wear, making it a durable choice for routine quality control. Simple integration into inspection routines and fixtures Thanks to the compact 1.24 mm diameter and modest length, the gauge pin integrates easily with bespoke jigs, stack gauges and fixture bores. The compact form factor supports rapid manual checks and can be used as a reference in comparative setups. For documentation purposes the pin is identifiable by SKU M323.124 and is suitable for operators who require a practical, high‑precision gauge for everyday measurement tasks. For procurement of the Metav IndustryLine test pin with guaranteed ±0.001 mm accuracy, contact Metav Werkzeuge for order placement or technical advice Technical Data Article number: M323.124 GTIN: 4061905054457 Brand: Metav IndustryLine Weight: 0.003 kg Facts Diameter: 1.24 mm Length: 50 mm Tolerance: ±0.001 mm Special features Material: Special steel Version: Workshop execution Category: Gauge pin / test pin FAQ What tolerance can be expected from this test pin? The test pin M323.124 is specified to ±0.001 mm, providing ultra‑fine control for go/no‑go and end‑measurement tasks with high repeatability. Is the pin suitable for use in fixture and jig mounting? Yes, the gauge pin’s 1.24 mm diameter and 50 mm length make it suitable for integration into small fixtures and comparative jigs used in routine inspection. Which materials is this gauge pin compatible with for checking bores? The pin is intended as a reference element for dimensional checks and is material‑agnostic regarding the part being measured; the pin itself is made from special steel for durability. How is the item identified when ordering? Order by SKU M323.124 or GTIN 4061905054457 to ensure the correct Metav IndustryLine test pin with the stated tolerance and dimensions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.25mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
High‑precision test pin performance with ±0.001 mm repeatability and a compact 1.25 mm probe diameter delivers reliable end‑measurement checks; combined with a robust special steel shaft and protective transport case, it supports consistent gauge and inspection workflows. Order the test pin directly via Metav Werkzeuge or consult our technicians for integration advice. Test pin M323.125 – 1.25 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) A Test pin M323.125 designed for precise end‑measure verification and gauge applications, supplied in workshop specification with a 50 mm shaft length. ±0.001 mm high repeatability 1.25 mm probe diameter 50 mm hardened special steel shaft Workshop finish with transport case Consistent measurement where micrometre precision matters The gauge offers ±0.001 mm repeatability on a slender 1.25 mm probe, which makes it suited to fine end‑measure checks and tight‑tolerance fixtures. Manufactured to tight tolerances, the probe minimises runout and measurement uncertainty during repetitive checks. This level of precision supports rational measurement regimes, reducing rework and ensuring components meet specified end dimensions with measurable confidence. The compact probe geometry also simplifies access to small bores and features while maintaining stability. Robust workshop design for frequent handling Constructed from special steel and finished for workshop use, the probe combines corrosion resistance with the mechanical strength required for repeated seating and withdrawal in gauge setups. The 50 mm shaft balances accessibility with stiffness, while the low mass (0.003 kg) reduces inertia during rapid inspection cycles. Delivery in a protective transport case preserves dimensional integrity during storage and transit, limiting the risk of damage and supporting longer service life under everyday production conditions. Practical deployment across inspection and tooling tasks This single‑piece gauge serves as a reliable reference in closing measurements, fixture set‑up and plug gauge routines. The small diameter probe integrates easily into comparator stands and fixture plates, and its workshop specification simplifies mounting in test rigs. Supplied as an individual probe, the item is ideal for replacing worn pins or extending an existing gauge set without altering established inspection procedures. The M323.125 therefore supports efficient, repeatable workflows in toolrooms and inspection stations. Choose the Metav IndustryLine M323.125 for dependable end‑measure checks and contact Metav Werkzeuge GmbH in Emmerich for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.125 GTIN: 4061905054464 Label: Test pin, single, 1.25 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 1.25 mm Shaft length: 50 mm Accuracy / repeatability: ±0.001 mm Weight: 0.003 kg ECLASS: 21170231 Special features Material: Special steel Workshop specification Supplied single, without additional pieces Delivered in transport case for protection Intended for end‑measure and gauge applications FAQ What accuracy can be expected from this probe? The probe delivers ±0.001 mm repeatability as specified for the M323.125 test pin from Metav IndustryLine. Is the probe suitable for use in fixture plates and comparator stands? Yes, the 50 mm shaft and 1.25 mm diameter make it compatible with standard fixture and comparator mounting arrangements. Does the delivery include a protective container? The test pin is supplied in a transport case to protect the probe during handling and storage. Which materials is the shaft made from? The shaft is manufactured from special steel, chosen for strength and workshop durability. Can this item replace worn pins in an existing gauge set? The single‑piece design of the M323.125 makes it suitable for replacing individual worn pins without requiring changes to existing gauge assemblies. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.26mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
The combination of ±0.001 mm tolerance, a 1.26 mm diameter and a 50 mm length delivers repeatable end‑measure checks with minimal setup time; benefit from reduced inspection uncertainty and consistent fit Gauging. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application support. M323.126 Gauge Pin — 1.26 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.126 Gauge Pin is a single precision test pin for fine plug and end‑measure verification in workshop environments Diameter 1.26 mm for fine features Tolerance ±0.001 mm for high precision Length 50 mm, workshop design Special steel construction for durability Ensured measurement certainty for small bores and fits The pin provides a ±0.001 mm tolerance that supports critical go/no‑go checks and dimensional verification in assembly and inspection routines. With a 1.26 mm nominal diameter, this test pin is designed for fine bore gauging where repeatability matters; the tight tolerance reduces measurement scatter and helps to avoid false rejects in quality control. The compact form factor also shortens handling time during batch inspections, contributing to a more efficient workflow. Durable workshop construction that resists wear Made from special steel and finished for workshop use, the pin resists surface damage that could otherwise change the functional diameter over repeated cycles. The 50 mm length gives sufficient engagement depth for many plug checks while remaining rigid during handling, thereby limiting deflection and preserving dimensional integrity. These material and dimensional decisions translate into longer service life and lower replacement frequency compared with softer or shorter alternatives. Practical integration into quality processes The gauge pin is intended for direct use in inspection benches, plug‑gauge assemblies and manual gauging processes where small, precise diameters are required. Its straightforward geometry simplifies calibration and routine verification. Traceability is supported by the product data and GTIN for inventory control, enabling clear documentation in quality records and easier part tracking in regulated manufacturing environments. For specific application advice or to confirm suitability for a particular tolerance chain, contact Metav Werkzeuge for technical guidance and procurement assistance Technical data Article number: M323.126 GTIN: 4061905055201 Category: Messstifte Numbers / Core technical data Diameter: 1.26 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Accuracy designation: ±0.001 Materials / Special features Material: Special steel Version: Workshop design ECLASS: 21170231 Single piece delivery FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.001 mm, ensuring high repeatability for fine bore checks. Is the pin suitable for repeated plug‑gauge cycles in a production line? Yes, the special steel construction and workshop design of the pin support frequent use and help maintain dimensional stability over repeated cycles. How deep should the pin engage when checking a bore? Engagement depth depends on the inspection requirement, but the 50 mm overall length offers adequate penetration for most plug and end‑measure verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.27mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability and workshop-ready robustness provided by a compact 1.27 mm diameter and a tight ±0.001 mm tolerance together with a corrosion‑resistant special‑steel construction for dependable end‑measurements; order directly via Metav Werkzeuge or contact the consultants for application advice and stock status. Gauge pin M323.127 — single precision test pin, 1.27 mm, ±0.001 mm The Gauge pin M323.127 is a single, workshop‑grade test pin designed for precise end‑measurements and checking of small bores and features in inspection and production environments. Precision ±0.001 mm tolerance Diameter 1.27 mm, length 50 mm Made from special steel workshop grade Supplied in protective transport case Accuracy that supports repeatable inspection results The compact inspection pin delivers a ±0.001 mm manufacturing tolerance, which translates into reliable pass/fail decisions when used as a reference element in gauging jigs or manual checks. This level of precision places the pin in the realm of fine workshop metrology where micrometric reproducibility is required; deviations at this order are traced to material contact or fixture behaviour rather than the probe itself. The small 1.27 mm diameter and 50 mm length allow use in confined bores and assembly fixtures while maintaining stable seating and contact geometry. By specifying the tolerance in absolute terms, the component enables predictable interchangeability in serial quality checks and shortens corrective loops in production. Designed for practical workshop integration Built as a workshop execution, the test pin combines a hardwearing special‑steel body with a form factor that fits standard inspection racks and handheld fixtures. Handling is simplified by the balanced 50 mm length and a total mass of approximately 0.003 kg, which reduces inertia during manual transfer and positioning. Supplied in a protective transport case, the item is ready for safe storage and movement between bench, lab and machine shop without additional packaging steps. The robust construction minimises fretting and wear at contact points, so that maintenance intervals are extended and inspection throughput remains steady. Consistency, traceability and procurement convenience Traceability is supported by clear identifiers: SKU M323.127 and GTIN 4061905055218 allow inventory control and procurement integration. The special‑steel composition ensures dimensional stability under typical workshop conditions; hardened surfaces resist rapid abrasion, preserving the ±0.001 mm rating over repeated cycles. For purchasing and supply reliability, Metav IndustryLine places the emphasis on dependable stock and predictable lead times, backed by a European quality filter that vets incoming parts for conformity. This combination of dimensional accuracy, durable material selection and logistical transparency reduces downtime and contributes to consistent product quality. Contact Metav Werkzeuge in Emmerich for technical matching, availability and supply of the M323.127 gauge pin: info@metav-werkzeuge.com — Tel. +49 2822 7131930 Technical Data Article number: M323.127 GTIN: 4061905055218 Label: Prüfstift, einzeln, 1,27mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.27 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop execution Protective transport case included Material: special steel SKU: M323.127 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.127 is manufactured to a ±0.001 mm tolerance, enabling high‑precision end‑measurements and consistent repeatability in inspection tasks. Which dimensions define the pin for fixture planning? The pin has a diameter of 1.27 mm and a length of 50 mm, information that can be used directly for fixture layout and bore engagement calculations. Is the pin ready for workshop use on delivery? Yes, the M323.127 arrives as a workshop‑grade test pin and is supplied in a protective transport case suitable for safe storage and movement between bench, lab and shop floor. How is the product identified for ordering and stock control? Order and inventory references include SKU M323.127 and GTIN 4061905055218, which facilitate procurement and catalogue matching. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.28mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of micron-level accuracy (±0.001 mm) combined with a 1.28 mm diameter and a compact 50 mm length for dependable fit verification and repeatable checking in workshop environments; order the gauge pin directly via Metav Werkzeuge or ask our consultants for application support. Gauge pin M323.128 — Single workshop-grade gauge pin, 1.28 mm, ±0.001 mm The gauge pin M323.128 is a workshop-grade single gauge pin intended for precise end‑measurements and fit checks in inspection and assembly routines. Workshop-grade execution Tolerance ±0.001 mm for micron accuracy Compact 50 mm length for tight installations Manufactured from special steel for durability Micron accuracy where it matters The primary advantage of this gauge pin is its ±0.001 mm tolerance, which corresponds to one micrometre and allows reliable discrimination between barely differing fits. Such a fine tolerance makes the pin suitable for acceptance checks, go/no-go validations and serial inspection tasks where repeatability reduces rework and scrap. The high resolution supports quality control across production runs and provides a verifiable reference for measuring instruments or comparators. Robust construction for everyday workshop use Produced in special steel and specified as a workshop-grade component, the pin combines resistance to wear with practical handling characteristics. Its 50 mm length offers sufficient reach for many end‑measure and assembly checks while remaining short enough to avoid bending under normal handling. The light mass contributes to comfortable, safe handling during repetitive checks and reduces operator fatigue during batch verifications. Practical integration into inspection workflows Designed as a single pin for direct fit inspection, the component simplifies checks on bores, pins and assembly seats by offering a standardised reference gauge. The 1.28 mm diameter is useful for precision dowel checks and mating part verifications; its use streamlines decision-making in production and inspection stages by delivering quick, unambiguous results. When combined with documented measurement procedures, the pin helps sustain process stability and traceability across production cycles. Contact Metav Werkzeuge today for procurement and technical advice on Metav IndustryLine gauge pins — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.128 GTIN: 4061905055225 Brand: Metav IndustryLine Facts Diameter: 1.28 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop-grade execution Single gauge pin for end measurements Intended for fit checks and inspection FAQ What tolerance does the gauge pin offer and what does that mean for inspections? The gauge pin M323.128 has a tolerance of ±0.001 mm, which allows micron‑level discrimination during acceptance checks and fit inspections, improving repeatability in serial measurements. Is the gauge pin suitable for use on precision dowel checks and small bores? Yes, the 1.28 mm diameter of the M323.128 makes it suitable for dowel verifications and small bore fit checks where tight dimensional control is required. What material is used and how does it affect durability? The pin is made from special steel, chosen for wear resistance and stability in workshop environments, which supports sustained accuracy over repeated use. Can the pin be used as a reference for serial inspection processes? The M323.128 gauge pin is designed for quick go/no‑go checks and standardised fit verification, making it a practical reference tool in serial inspection workflows. What is the intended application area for this pin? This single gauge pin is intended for end‑measurements, fit checks and assembly verification tasks in workshops and small‑batch production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.29mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the extremely fine tolerance of ±0.001 mm, the compact 1.29 mm diameter and the 50 mm shaft to secure repeatable gauging and end‑measure inspections in a busy workshop environment. Order the test pin directly via Metav Werkzeuge or consult the team for integration advice. Test pin M323.129 — Inspection pin, 1.29 mm diameter, ±0.001 mm (Metav IndustryLine) The Test pin M323.129 is a workshop‑grade inspection pin designed for precise end‑measure checks, tight‑tolerance gauging and fixture‑based probing in mechanical workshops and quality control benches. Workshop-grade inspection pin Diameter 1.29 mm for fine gauges Tolerance ±0.001 mm for high accuracy Length 50 mm, special steel construction Consistent high precision for reproducible measurements The slender probe is engineered for repeatability in routine inspection tasks: with a stated tolerance of ±0.001 mm, the pin suits high‑precision checks where micrometre differences are critical. The small 1.29 mm diameter minimises contact area and is ideal for narrow bores, pin gauges and end‑measure references, while the 50 mm shaft length provides adequate reach without compromising stiffness. The special steel construction contributes to reliable surface behaviour under repeated contact, reducing measurement scatter and supporting consistent quality control results. Easy to integrate into fixtures and gauge systems The compact geometry and workshop specification make the pin straightforward to incorporate into bespoke fixtures, plug gauges and comparator setups. The 50 mm length is a practical compromise between reach and rigidity, enabling its use in modular test rigs and handheld comparators alike. Using a dedicated inspection pin of this calibre reduces rework and speeds up inspection cycles, a rational benefit for production lines and measuring stations that require fast, verifiable decisions. Robust handling and clear identification for workshop use Designed as a workshop version, the pin tolerates frequent handling and standard workshop conditions while maintaining dimensional stability. With a low mass of 0.003 kg and a clear manufacturer SKU for traceability, the component is easy to store, pick and deploy during batch inspections. The included GTIN aids inventory management and reduces sourcing errors; the clear specification and material declaration support procurement and long‑term replacement planning with minimal downtime. For reliable supply and technical guidance on the M323.129 inspection pin from Metav IndustryLine, contact Metav Werkzeuge in Emmerich — the team can advise on fixture compatibility and ordering options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.129 GTIN: 4061905055645 Manufacturer: Metav IndustryLine EClass: 21170231 Data Diameter: 1.29 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Version: workshop execution Category: test pins FAQ What applications suit this inspection pin best? The M323.129 inspection pin by Metav IndustryLine is intended for end‑measure checks, gauge inserts and precise probing in mechanical workshops and quality control benches. Is the pin supplied with a calibration certificate? The M323.129 test pin is supplied as a workshop‑grade component; it is not delivered with a calibration certificate unless stated otherwise in the product label. Can this probe be used inside narrow bores and fixtures? Yes — the 1.29 mm diameter and 50 mm shaft length make the pin suitable for narrow bores and integration into bespoke fixtures or plug gauge assemblies. How is the component identified for reordering and inventory? Identification is via SKU M323.129 and GTIN 4061905055645, which support straightforward reordering and stock tracking for the inspection pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.2mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
The combination of a 1.20 mm diameter, ±0.001 mm tolerance and a robust 50 mm length ensures highly reproducible end‑measure checks in routine workshop use. Order the M323.120 directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.120 — single precision gauging pin, 1.20 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Test pin M323.120 is a single, precision‑ground gauging pin designed for reliable end‑measure verification and workshop gauging tasks, combining fine dimensional control with a compact 50 mm form. Precision tolerance ±0.001 mm Diameter 1.20 mm, length 50 mm Special steel construction for durability Workshop version for routine gauging Repeatable precision for end‑measure verification The M323.120 serves where consistent dimensional checks are essential: its ±0.001 mm declared accuracy provides a clear quantitative basis for pass/fail decisions in small‑bore inspections and end‑measure controls. Because the pin is manufactured from special steel and finished for high concentricity, measuring uncertainty from the gauge itself is minimised, which helps to reduce rework and scrap rates. In practical terms, this means faster quality decisions during batch checks and more predictable outcomes for downstream processes. Durable construction and handling suited to busy workshops A compact 50 mm length combined with a 1.20 mm diameter yields a form factor that is easy to position while remaining stiff under normal gauging loads. The core material, listed as special steel, offers durability and wear resistance for repetitive insertion checks; the nominal mass of 0.003 kg reflects the small, machined geometry. The workshop specification emphasises a balance between handling robustness and measurement fidelity, so the pin is appropriate for regular use in fixture setups and comparative gauges without unnecessary fragility. Practical integration into quality routines and documentation Designed as a single, ready‑to‑use gauging element, this test pin fits directly into go/no‑go fixtures, measuring jigs and pin gauges for end‑measure tasks. The clearly stated dimensional data — 1.20 mm diameter, ±0.001 mm tolerance, 50 mm length — supports straightforward inclusion into inspection plans and measurement protocols. Metav IndustryLine’s positioning as a precision partner means the M323.120 is offered within a broader supply and documentation ecosystem that helps standardise workshop processes and maintain traceable component records. Contact Metav Werkzeuge to discuss how the M323.120 can be specified for existing fixtures or measurement procedures and to obtain the full product details Technical data Article number: M323.120 GTIN: 4061905054419 Brand: Metav IndustryLine Label: Test pin, single, 1.20 mm, ±0.001 mm, length 50 mm Special feature: Workshop version Core specifications Diameter: 1.20 mm Tolerance / accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Material: Special steel eCl@ss: 21170231 Design & functional features Single gauging pin (sold individually) Precision ground finish Suited for end‑measure checks and fixture use Compact, stiff geometry for reliable insertion FAQ What level of accuracy does the pin provide? The pin is specified with a tolerance of ±0.001 mm, making it suitable for very fine end‑measure verifications where micrometre‑level precision is required. What are the pin's exact dimensions? The gauging pin has a diameter of 1.20 mm and a length of 50 mm, matching the dimensional data for the M323.120. What material is used for the pin? The component is manufactured from special steel, selected for durability and stable dimensional behaviour in workshop environments. Is the pin supplied individually or as a set? This item is offered as a single gauging pin and is intended for installation in fixtures or use as a standalone check pin. How should the pin be handled to preserve accuracy? Handle by the shank without forcing sideways loads; store in a clean, dry environment to avoid contamination and prevent surface wear that could affect measurement fidelity. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.31mm Test Pin Single ±0.001mm Accuracy 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop durability, sub‑micron repeatability and compact handling for reliable end‑measure inspection. Order the test pin directly via Metav Werkzeuge or ask our consultants for application advice. M323.131 Test Pin — Single precision gauge pin 1.31 mm, ±0.001 mm (Metav IndustryLine) The M323.131 is a single test pin designed for precise end‑measure and gauge checks in workshop and inspection environments. Single test pin 1.31 mm diameter, high precision Tolerance ±0.001 mm for tight inspection tasks Length 50 mm suitable for through and blind checks Repeatable sub‑micron performance for critical inspections The component is manufactured for repeatable measurement where tight limits matter; the nominal diameter of 1.31 mm is held to a ±0.001 mm tolerance, ensuring that dimensional checks produce consistent, verifiable results. The tight tolerance makes the pin suitable for comparative gauging, pin‑and‑plug fit tests and end‑measure controls in small‑component production. Clear numerical stability reduces process variation and supports routine quality documentation. Workshop‑grade construction for robust handling Machined from special steel, the pin offers a balance between surface hardness and machinability that keeps wear low in repetitive use. At a length of 50 mm, the shank gives sufficient reach for through‑hole and blind‑depth checks while remaining easy to handle during repetitive inspection cycles. The workshop version specification prioritises practical durability and lowers the risk of deformation under typical handling conditions. Integrates simply into inspection routines and fixtures The compact form factor and precise diameter make the element straightforward to fit into standard test fixtures, gauge blocks and comparator setups. Marked as a workshop test item from Metav IndustryLine, the product (SKU M323.131) is intended for direct incorporation into established measurement sequences, supporting traceable checks and routine end‑of‑line verification. Packaging is provided for secure transport, easing storage and handling between production and quality control stations. For reliable gauge pins from Metav IndustryLine, order the M323.131 through Metav Werkzeuge in Emmerich or contact our advisors at info@metav-werkzeuge.com / +49 2822 7131930 for tailored application guidance Technical Data Article number: M323.131 GTIN: 4061905055669 Material: Special steel Diameter: 1.31 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Packaging: transport box Facts Category: Gauge pin / test pin Version: Workshop execution Use case: End‑measure and gauge checks SKU: M323.131 Special features High repeatability for small‑part inspection Compact, easy‑to‑mount geometry Delivered secured for transport and storage FAQ What tolerance can be expected from this test pin? The M323.131 test pin is specified with a tolerance of ±0.001 mm, allowing sub‑micron repeatability for tight inspection tasks. Which material is the pin made from and how does that affect wear? The pin is produced from special steel, chosen to balance hardness and wear resistance for prolonged workshop use. Is the length of 50 mm suitable for blind‑hole checks? Yes; the 50 mm length provides adequate reach for many blind‑hole and through‑hole verifications while remaining manageable in fixtures. Can the pin be used directly in gauge block comparisons and fixtures? The diameter and form factor of the M323.131 make it suitable for integration into standard fixtures and gauge block comparison setups. How is the product delivered and protected in transit? The item is supplied secured in a transport box to protect the pin during shipment and handling Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.32mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of high repeatability and ultraprecise tolerance control with a compact, workshop-grade measuring pin. Combining ±0.001 mm positional accuracy and a slender 1.32 mm diameter in a 50 mm length ensures reliable end‑measure checks and fast fixture verification—order the probe via Metav Werkzeuge or consult our specialists for application advice. M323.132 Test pin (single) — Ø 1.32 mm, ±0.001 mm, 50 mm — Metav IndustryLine The M323.132 is a single precision test pin designed for fine dimensional checks, end‑measure verification and fixture testing in workshop and toolroom environments. Workshop execution for everyday robustness Diameter 1.32 mm for fine detail checks Tolerance ±0.001 mm for sub‑micron repeatability Length 50 mm suited to fixture and gauge use Consistent precision for production control Manufactured from special steel, the measuring pin delivers a ±0.001 mm positional accuracy that supports high‑precision inspection tasks and reduces downstream rework. The slim 1.32 mm nominal diameter minimises intrusion into tight features while the 50 mm overall length provides enough reach for most gauge blocks, jigs and reference fixtures. In practice, this combination reduces readjustment cycles during set‑up and shortens control loops, meaning fewer stoppages and more predictable throughput. The compact mass also limits inertial effects during manual probe placement, preserving measurement repeatability. Practical benefits in workshop and toolroom use Built as a workshop version, the probe balances wear resistance with practical handling for routine checks and assembly control. The choice of special steel enhances surface stability under frequent use and resists minor impacts common at the bench. For technicians and quality engineers the pin functions effectively as a precision reference for end‑face checks or as a locating element in small fixtures; the geometry supports both axial alignment and repeatable contact position. Where fast comparative measurements are needed, the pin simplifies go/no‑go assessments and speeds up batch inspection. Integration and traceability for quality procedures Traceable identification and robust construction assist documentation within inspection plans and quality records. The pin’s nominal values and measured tolerance make it straightforward to reference in process control charts and inspection protocols. Lightweight construction minimises handling fatigue during repetitive checks and supports consistent touch force when used with mechanical holders. For customers requiring further data or compatibility information, Metav Werkzeuge offers technical consultation to align the probe with existing gauges or fixture systems, ensuring the test pin integrates cleanly into documented workflows. Order the Metav IndustryLine M323.132 test pin from Metav Werkzeuge for precision end‑measure verification and process reliability; for specification matching or application guidance contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.132 GTIN: 4061905055676 Material: Special steel Length: 50 mm Diameter: 1.32 mm Tolerance: ±0.001 mm Weight: 0.003 kg Facts Diameter: 1.32 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg GTIN: 4061905055676 Special features Workshop execution Single test pin Special steel construction SKU: M323.132 FAQ What inspection tasks is this test pin suited for? The M323.132 test pin from Metav IndustryLine is suited to end‑measure checks, fixture alignment and small‑feature verification where a 1.32 mm locating element and ±0.001 mm tolerance are required. Is the material corrosion resistant for workshop use? The measuring pin is made of special steel, selected for surface stability and wear resistance in a workshop environment; corrosion behaviour depends on local conditions and maintenance routines. Can the pin be used as a locating dowel in jigs? Yes, the probe functions reliably as a locating element in jigs and fixtures thanks to its precise diameter and stable length (50 mm), which support reproducible positioning and quick comparative checks. How is the M323.132 identified for inventory and traceability? Identification is via the SKU M323.132 and GTIN 4061905055676, enabling direct reference in inspection records and procurement systems. What benefits does the workshop execution provide? The workshop execution prioritises durability and practical handling for routine use, offering a balance between hardness and serviceability for frequent measuring tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.33mm Test Pin, Single, ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
Compact workshop test pin combining sub‑micron tolerance and robust special‑steel construction for consistent end‑gauge and inspection use; ideal where repeatable, small‑diameter checks are required. Order directly via Metav Werkzeuge or consult our specialists for technical alignment. Test pin M323.133 — precision 1.33 mm, ±0.001 mm | Metav IndustryLine A Test pin M323.133 engineered for workshop use, offering a 1.33 mm diameter and a length of 50 mm for precise end‑gauge and component inspection. Test pin M323.133 by Metav IndustryLine Diameter 1.33 mm with ±0.001 mm tolerance 50 mm length for end‑gauge tasks Made from special steel, workshop version Reduce rejects with measurable sub‑micron precision The M323.133 test pin delivers a tolerance of ±0.001 mm, a level of accuracy that significantly narrows the uncertainty band in go/no‑go and end‑gauge checks. Such fine specification is particularly effective when verifying bores, alignment pins or mating features where small deviations translate into assembly issues. By converting a dimensional check into a reproducible, numerical pass/fail result, this pin supports faster decision‑making on the shop floor and reduces downtime caused by unnecessary rework. The compact geometry and strict dimensional control make it suitable as a reference for comparative gauging and verification routines. Compact design for confined and precision applications A small diameter combined with a 50 mm usable length allows access to confined features without compromising handling or stability. The slim profile is useful when probing tight bores, locating tiny dowel seats or checking spacing in micro‑mechanical assemblies. The pin’s form factor balances reach and rigidity to minimise bending under light application forces, thereby improving measurement repeatability. For workshop environments that demand both dexterity and accuracy, this design eases handling while maintaining the geometric fidelity necessary for reliable inspections. Robust material choice for repeated workshop use Constructed from special steel, the test pin is intended for regular use in industrial settings where durability matters. The material selection provides resistance to wear and preserves the critical measuring diameter over many cycles, reducing the frequency of replacement and ensuring consistent results. For routine inspection tasks and production checks, the combination of a hardened contact surface and a corrosion‑resistant finish supports longevity and protects the calibrated condition of the gauge. Practical fit into quality assurance workflows Designed for straightforward integration into existing inspection routines, the pin serves as a compact reference element for incoming inspection, in‑process checks and final acceptance. Its clear numerical specification and robust construction enable the transfer of measurement tasks from specialised labs to the workshop while keeping traceability and repeatability intact. When used alongside standard gauging jigs or comparators, the pin gives a fast, objective check that complements digital measurement systems and manual comparators alike. Contact Metav Werkzeuge to check compatibility of the M323.133 test pin with existing gauging setups or to request delivery from our Emmerich quality hub: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.133 GTIN: 4061905055683 Brand: Metav IndustryLine Category: Measuring pins Facts Diameter: 1.33 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Suitable for end‑gauge and inspection tasks ECLASS: 21170231 FAQ What applications is this test pin suitable for? The M323.133 test pin from Metav IndustryLine is suitable for end‑gauge checks, bore verification and small‑feature inspections where a 1.33 mm reference is required. How precise is the measurement capability of the pin? The test pin offers a tolerance of ±0.001 mm, providing sub‑micron repeatability for fine inspection tasks with consistent pass/fail assessment. Which material is used and why does it matter? Manufactured from special steel, the pin resists wear under repeated use and preserves the critical diameter for reliable inspection cycles. Can the pin be used in a production environment? Yes — the workshop design of this Metav IndustryLine test pin makes it robust for regular shop‑floor inspections and integration with gauging fixtures. What is the article number for ordering or referencing? Refer to the article number M323.133 and GTIN 4061905055683 when ordering or specifying the test pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.34mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied In Case - Metav IndustryLine
Compact precision and robust workshop design combine here to ensure repeatable end‑measure checks: the 1.34 mm diameter with a tight ±0.001 mm tolerance and a 50 mm shaft minimise measurement variance and speed up pass/fail decisions. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.134 — precision gauge pin, 1.34 mm, ±0.001 mm (Metav IndustryLine) A precision gauge pin intended for reliable end‑measure and limit checks in workshop environments, presented as a single, hardened measuring pin. Workshop-grade construction for robust daily use Diameter 1.34 mm with ±0.001 mm tolerance 50 mm length for deep-feature checks Special steel for wear resistance Faster inspection through measurable precision A narrow tolerance reduces uncertainty and accelerates routine checks: the ±0.001 mm specification allows this pin to serve as a dependable reference for go/no‑go assessments and dimensional verification. Because the diameter is set at 1.34 mm, insertion fits and seating behaviour are highly reproducible; deviations that matter for production control are immediately apparent. This degree of precision supports a reduction in rework by enabling clear, objective pass‑fail decisions and shorter inspection loops. Built to last in daily workshop use Constructed in a workshop-grade format and machined from special steel, the shaft offers resistance to abrasion and deformation under repeated seating. The 50 mm overall length balances access to recessed features with a stiffness that limits bending during measurement, which preserves dimensional integrity over time. Where frequent handling and repeated insertions are expected, the combination of material choice and compact geometry delivers lower lifecycle costs through extended service intervals. Simple integration into common metrology tasks Designed as a single probe for end measurement, the gauge pin M323.134 is suitable as a calibrated reference in inspection benches and jigs, or as a quick‑check tool in first article inspection. The compact form factor supports compatibility with a wide range of fixtures and extension tools, while the clear numeric specification ensures traceability in documentation. With its defined tolerance and standard dimensions, the pin can be incorporated into routine quality control procedures to improve repeatability and simplify reporting. Contact Metav Werkzeuge today to discuss Metav IndustryLine gauge pins or to request technical matching for specific inspection tasks; deliveries are managed from our Emmerich location for reliable supply across Europe. Technical data Article number: M323.134 GTIN: 4061905056383 Manufacturer: Metav IndustryLine Facts Diameter: 1.34 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Accuracy class: ±0.001 Special features Workshop execution Material: special steel Single measuring pin for end‑measure applications Category: gauge pin (messstifte) Story trigger: end‑measure FAQ What is the diameter tolerance of the gauge pin? The gauge pin M323.134 is manufactured to a ±0.001 mm diameter tolerance for high‑precision reference measurements. Which material is used for the shaft? The shaft is made from special steel, chosen to provide durability and resistance against wear during repeated use. For which applications is this pin intended? It is intended for end‑measure checks, go/no‑go reference tasks and quick dimensional verification in workshop inspection routines. How is traceability provided for this pin? The product is listed with GTIN 4061905056383 and is supplied with the documented nominal and tolerance values for inclusion in inspection records. What length is available and why is it useful? A 50 mm length offers sufficient reach for recessed features while maintaining stiffness to reduce measurement error. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.35mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine ±0.001 mm tolerance, a compact 1.35 mm diameter and a 50 mm working length for repeatable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin M323.135 – 1.35 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.135 is a single‑piece precision test pin designed for fine inspection tasks and end‑measurement verification in workshop environments High precision tolerance ±0.001 mm Diameter 1.35 mm for fine inspection 50 mm working length Workshop‑grade special steel construction Accuracy that reduces inspection uncertainty The core benefit of this pin is its ±0.001 mm specification, which supports repeatable dimensional checks in quality control processes. With a nominal diameter of 1.35 mm, the pin is suited to narrow bores and tight fits where micrometre‑level certainty matters. The narrow tolerance reduces ambiguity in go/no‑go assessments and enables faster decision making on the shop floor, lowering rework rates and improving first‑pass yield. Robust, workshop‑ready construction for everyday use Built as a workshop version, the pin combines compact geometry with resilient special steel for reliable handling in routine inspection tasks. The 50 mm length gives a useful reach without sacrificing stiffness, keeping deflection minimal during insertion. Lightweight at 0.003 kg, the component is easy to position in jigs and fixtures while offering the mechanical integrity required for repeated contact in busy production runs. Designed for precise end‑measurement verification Intended for end‑measurement applications, this test pin acts as a reference probe for gauging assemblies, fixture alignment and comparative checks. Supplied as a single item, the component integrates with standard inspection setups and can serve as a replacement pin in sets or bespoke gauges. The simple geometry means measurement uncertainty is governed by diameter tolerance and handling technique, so consistent test procedures maximise the benefit of the specified accuracy. Traceability, identification and procurement made straightforward Identification via GTIN 4061905056390 and SKU M323.135 ensures straightforward inventory control and traceability through procurement and inspection records. The compact dimensions and workshop focus make this pin a practical choice where space, speed and precision intersect—for example, detailed end‑of‑line checks, sample testing or integration into maintenance toolkits. Reliability in delivery is underpinned by Metav IndustryLine’s quality filter at the Emmerich site. Contact Metav Werkzeuge today for tailored advice or to request the Metav IndustryLine gauge pin M323.135 for reliable end‑measurement verification — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.135 GTIN: 4061905056390 Description: Test pin, single item, 1.35 mm, ±0.001 mm, 50 mm length Facts Diameter: 1.35 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Accuracy: ±0.001 Special features Material: Special steel Workshop execution Application: end‑measurement Item type: Gauge pin Category: Gauge pins FAQ How precise is the gauge pin? The gauge pin M323.135 has a tolerance of ±0.001 mm, providing micrometre‑level precision suitable for tight tolerance inspections in workshop and inspection settings. What material is used for this test pin? The M323.135 is manufactured from special steel chosen for wear resistance and dimensional stability under typical workshop conditions. For which applications is this pin most suitable? This test pin is intended for end‑measurement verification, narrow bore checks and use in jigs or fixture assemblies where a small‑diameter, high‑precision reference is required. Is the item supplied individually or in a set? The product is supplied as a single gauge pin (single item) and is suitable as a spare or for integration into bespoke inspection tools. How is the product identified for procurement and traceability? Identification is provided via GTIN 4061905056390 and SKU M323.135 to support purchasing, inventory and inspection traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.36mm Gauge Pin ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of exact roundness and repeatable length control combined with workshop-ready durability for consistent go/no-go checks in serial production. Benefit from the ultra-fine ±0.001 mm tolerance and the compact 1.36 mm diameter to ensure precise end‑measurements; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. M323.136 Gauge pin (single) — 1.36 mm, ±0.001 mm, 50 mm length — Metav IndustryLine The M323.136 gauge pin is a single test pin designed for precision end‑measurement and fit checking in workshop and inspection environments Workshop version for robust handling Diameter 1.36 mm for precise fits Tolerance ±0.001 mm high accuracy Length 50 mm for deep measurements Accuracy that reduces rework and speeds inspection A ±0.001 mm tolerance delivers measurable benefits for quality control and final inspection: fewer false rejects and faster acceptance decisions. The very small 1.36 mm diameter and calibrated length provide a reliable reference for plug and bore checks, while the tight roundness and dimensional stability support automated and manual gauging routines. This level of precision is particularly useful where tight fits and clearance checks determine assembly success, allowing process engineers to quantify tolerances rather than estimate them. Built for everyday workshop use with dependable material properties Manufactured from special steel, the pin balances surface hardness and resistance to wear with ease of handling. The workshop execution emphasises robustness for repeated insertion and removal in jigs, fixtures and test benches. A 50 mm overall length gives sufficient reach for deeper bores and stepped components while remaining compact enough for handheld inspection. The combination of material choice and construction reduces deformation risk during routine use, supporting reproducible results across shifts. Clear identification and traceability for production lines Items are supplied with the visible product code M323.136 and manufacturer identification to simplify storekeeping and traceability. The included GTIN 4061905056406 supports inventory workflows and ensures correct part selection for assembly or inspection stations. Stable labelling and a compact form factor reduce picking errors and speed up tool changes on the shop floor, which in turn shortens process downtime and improves throughput. Practical application: where this test pin adds value The single gauge pin is suitable for final inspection, quick gauge blocks checks, sliding‑fit verification and small‑bore roundness spot checks. Its high precision makes it suitable for both prototype evaluation and low‑volume production where dimensional certainty is required. When incorporated into a routine inspection sequence, the pin helps standardise go/no‑go checks and supports consistent documentation of acceptance criteria. For precision applications that demand reproducible sub-micron control, contact Metav Werkzeuge regarding the Metav IndustryLine M323.136 gauge pin to discuss suitability for specific fixtures and to arrange supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.136 GTIN: 4061905056406 Label: Prüfstift, einzeln, 1,36mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.36 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop version Supplied in protective transport case FAQ Is the gauge pin suitable for serial go/no-go checking? The M323.136 gauge pin from Metav IndustryLine is designed for serial go/no-go and fit verification tasks thanks to its ±0.001 mm tolerance and stable length. What materials is the pin compatible with for inspection tasks? The gauge pin itself is constructed from special steel and is used as a reference artefact; appropriate handling prevents damage when used with soft or abrasive workpieces. How is the M323.136 delivered and identified for stock control? The product is supplied with clear labelling and GTIN 4061905056406 to support inventory systems and avoid mix-ups on the shop floor. Can this pin be used for deep bore checks? With a 50 mm length, the pin is intended for deeper bore access than standard short pins and suits many fixtures that require extended reach. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.37mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
This workshop-grade gauge pin combines sub-micron repeatability, a compact 1.37 mm diameter and ±0.001 mm tolerance with a robust 50 mm length for reliable end‑measure checks; supplied in a protective transport case and produced from special steel. Order directly via Metav Werkzeuge or contact our consultants for application advice and availability. Gauge pin M323.137 — Workshop test pin, 1.37 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.137 is a single, workshop‑grade test pin intended for precise end‑measure verification and small‑bore checking in routine metrology and inspection tasks. Workshop version for daily shop use Diameter 1.37 mm with ±0.001 mm tolerance Length 50 mm for end‑measure checks Delivered in protective transport case Repeatable, measurable accuracy for everyday inspection A compact test pin with a 1.37 mm diameter and ±0.001 mm tolerance provides a measurable basis for repeatable fit and end‑measure assessments. The tight tolerance reduces uncertainty in pass/fail checks and helps to prevent costly rework by ensuring immediate detection of deviations. Manufactured in a workshop execution, this pin is intended for frequent handling and fast inspection cycles; the special steel construction supports dimensional stability during routine use. Designed for tough shop environments and safe handling The workshop design emphasises robustness without compromising precision. At 50 mm length and a low mass of 0.003 kg, the pin is easy to position and manoeuvre in restricted setups, while the protective transport case minimises the risk of nicks and contamination during storage and transport. The compact format suits bench inspection procedures and keeps handling straightforward in both manual and semi‑automated verification stations. Simple integration into inspection processes and traceability As a single gauge pin, the item is suitable for end‑measure verification, fixture set‑up and small‑bore checks within larger gauging routines. Clear identifiers such as GTIN and SKU permit simple inventory management and traceability for quality records. The precise dimensions make the pin suitable as a workshop reference component for routine checks and quick comparative measurements, supporting a consistent quality workflow. Request supply or technical advice from Metav Werkzeuge—contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical details Article number: M323.137 GTIN: 4061905056413 Manufacturer: Metav IndustryLine SKU: M323.137 Core specifications Diameter: 1.37 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Classification: Workshop execution Features / Materials Material: Special steel Application: End‑measure verification / small‑bore checks Delivery: Protective transport case ECLASS: 21170231 FAQ What tolerance does the pin offer? The gauge pin M323.137 is specified with a tolerance of ±0.001 mm, providing high repeatability for workshop verification. Which material is used for this test pin? The pin is made from special steel, selected for dimensional stability and suitability for routine shop handling. Is the pin delivered ready for use and protected? Yes, the item is supplied in a protective transport case to reduce the risk of damage during storage and transport. What inspection tasks is this pin suited to? This single test pin is intended for end‑measure verification, small‑bore checks and quick fixture set‑ups in workshop inspection routines. How can the pin be identified for inventory and traceability? Identification is via GTIN 4061905056413 and article number M323.137 for clear traceability in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.38mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of highly repeatable inspection results through a combination of extreme dimensional accuracy, compact form and durable special steel construction; the result is fewer rejects and faster inspection cycles. Order the M323.138 gauge pin directly via Metav Werkzeuge or consult our team for specification matching. M323.138 gauge pin — 1.38 mm, ±0.001 mm (Metav IndustryLine) A M323.138 gauge pin designed for precision end-measure checks and fine-fit verification in metrology and workshop inspection environments High-precision tolerance ±0.001 mm Diameter 1.38 mm for fine fits Length 50 mm for deeper checks Special steel workshop version Reliable precision for fine-fitting measurements This compact inspection element delivers micrometric accuracy where small clearances matter. With a declared tolerance of ±0.001 mm, the pin reduces uncertainty in go/no-go and fit verification tasks, allowing consistent decisions during quality control. The small 1.38 mm diameter is optimised for narrow bores and precision holes; the slim profile helps to access confined features without influencing the assembly or mating surfaces, which improves overall repeatability of checks. Durable construction that supports frequent use Manufactured from special steel and offered in a workshop grade configuration, the gauge pin balances surface integrity with day-to-day robustness. The 50 mm length provides enough engagement for many inspection scenarios while remaining easy to handle and less prone to bending than overly long probes. These material and geometric choices mean lower wear over repeated cycles and a longer interval between replacements, supporting efficient inspection routines and steady production throughput. Practical fit for inspection workflows Supplied as a single element for individual use in inspection benches or pin sets, the pin suits both manual and fixture-based checks. The 50 mm shank allows safe handling and deeper insertion into housings and recesses without needing special adapters. Traceability is supported by the SKU and GTIN on product documentation; identification and inventory management in central stores or quality labs is straightforward, making integration into existing inspection kits seamless. Choose the Metav IndustryLine M323.138 gauge pin for repeatable fine-fit control and request delivery from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.138 GTIN: 4061905056420 SKU: M323.138 Brand: Metav IndustryLine Facts Diameter: 1.38 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Supply form: single gauge pin Workshop execution FAQ What is the declared tolerance of this gauge pin? The M323.138 gauge pin is specified with a dimensional tolerance of ±0.001 mm, suitable for fine-fit verifications. For which inspection tasks is this pin suitable? This gauge pin from Metav IndustryLine is intended for precise end-measure checks, narrow-bore diameter verification and fine-fit assessments in workshop and metrology environments. How is the product supplied and identified? The item is delivered as a single gauge pin; identification is available via SKU M323.138 and GTIN 4061905056420 for inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.39mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance and durable special steel in a compact 50 mm length for repeatable inspection results; order the M323.139 directly via Metav Werkzeuge or consult the technical team for application support. Gauge pin M323.139 (single) – 1.39 mm, ±0.001 mm, 50 mm length by Metav IndustryLine The Gauge pin M323.139 is a workshop‑grade precision test pin designed for dimensional verification and end‑position checks in routine inspection and assembly environments. Workshop‑grade construction Diameter 1.39 mm, tolerance ±0.001 mm 50 mm hardened special steel shaft Supplied in protective case Consistent precision for routine inspection This single gauge pin delivers a repeatable measurement with a stated accuracy of ±0.001 mm, making it suitable for fine tolerance checks and verification tasks where small deviations matter. The tight tolerance reduces uncertainty in go/no‑go checks and fits verification, enabling faster decision‑making on production lines and in quality control benches. As a hardened inspection pin, it provides a stable reference for plug measurements and helps maintain traceable results across repeated cycles. Built to endure workshop conditions Manufactured in special steel and presented in a workshop‑grade execution, the tool withstands regular handling while retaining dimensional stability. The 50 mm shaft length and slender 1.39 mm diameter are optimised for confined bore inspections and plug checks in assemblies. Supplied in a protective case, the pin is protected during transport and storage, reducing the risk of nicks that would compromise measurement integrity. The compact, single‑piece design supports straightforward use in fixtures and manual inspection rigs. Practical use and integration into inspection routines Ideal for bench checks, fixture set‑ups and final inspection, the pin functions as a straightforward reference for bore gauging and pass/fail assessments. The compact geometry and high-precision specification simplify integration with existing inspection jigs and optical comparators; the gauge pin can be used where a precise cylindrical reference is required. Traceability is supported by the supplied labelling and the product’s unique SKU, which aids inventory control and process documentation in quality management systems. For reliable workshop inspections choose the Metav IndustryLine M323.139 gauge pin and contact Metav Werkzeuge in Emmerich for technical advice and prompt delivery to your facility: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.139 GTIN: 4061905056437 Label: Prüfstift, einzeln, 1,39mm, +/- 0.001 mm Länge 50 mm Category: Messstifte Facts Diameter: 1.39 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Workshop version Supplied in protective case Single piece gauge pin FAQ What is the intended use of this gauge pin? The M323.139 gauge pin is intended for precision plug checks, bore verification and end‑position inspection in workshop and production environments. How tight is the tolerance and what does it mean for inspections? With a tolerance of ±0.001 mm the gauge pin offers very fine repeatability; this level of accuracy supports precise go/no‑go assessments and reduces uncertainty in pass/fail decisions. Is the pin supplied ready for use and protected for transport? The gauge pin is supplied as a single, workshop‑grade item and comes in a protective case to prevent damage during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com