Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
1-2mm Ceramic Gauge Pin Set 101 Pieces 0.01mm Graduation Plastic Case - Metav IndustryLine
Take advantage of the combination of exceptional dimensional stability, long service life and precise 0.01 mm graduations for reliable go/no‑go checks in the workshop; order the ceramic gauge pin set directly via Metav Werkzeuge or ask our consultants if needed. Ceramic Gauge Pin Set, 101‑piece (1.00–2.00 mm, 0.01 mm increments) – Metav IndustryLine The ceramic gauge pin set is a workshop‑grade inspection kit that supplies antimagnetic, wear‑resistant pins for precise hole gauging, fixture verification and toolroom checking across fine mechanical and industrial applications. Zirconia ceramic, antimagnetic and wear‑resistant Hardness HV 1250 with < ±0.0015 mm accuracy 101‑piece set, 1.00–2.00 mm in 0.01 mm steps Workshop version with measuring pin holder and case Precision performance for consistent inspection results The ceramic gauge pin set delivers repeatable measurements where small diameters matter: the pins feature a hardness of HV 1250 and a declared dimensional accuracy of < ±0.0015 mm, which reduces the risk of false rejections and costly rework. Made from zirconia ceramic, the pins resist wear and maintain their nominal diameter over long service cycles, so calibrated adjustments and reference checks remain reliable even after frequent use. This results in a measurable reduction in inspection uncertainty and more consistent quality control. Practical handling that speeds up workshop routines A logically ordered 101‑piece range from 1.00 to 2.00 mm in 0.01 mm steps simplifies matching pin to hole without interpolation; the set is supplied in a compact plastic case with a measuring pin holder for secure handling and quick selection. The short, 50 mm pin length suits confined spaces and is easy to manipulate with tweezers or a holder when checking bores, gauges or mandrels. The workshop configuration supports efficient process checks during set‑up and in‑process inspection, helping to keep throughput high while maintaining precision. Material advantages and application scope The use of zirconia ceramic yields several practical benefits: the material is intrinsically non‑magnetic and chemically inert, so it will not transfer magnetism to sensitive parts or corrode during typical shop use. Its superior hardness and low coefficient of wear preserve diameters under repeated insertion cycles, which makes the set particularly suited to high‑repeatability tasks in toolmaking, precision assembly and maintenance operations. The compact diameter range targets fine‑mechanical work where sub‑millimetre accuracy and tactile feedback are essential. Choose the Metav IndustryLine ceramic gauge pin set for robust, high‑stability checking and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M318.591 Manufacturer: Metav IndustryLine Designation: Ceramic gauge pin set, 101‑piece Facts Measuring range: 1.00–2.00 mm Increment: 0.01 mm Pin length: 50 mm Hardness: HV 1250 Accuracy: < ±0.0015 mm Special features Material: zirconia ceramic, wear‑resistant, antimagnetic Delivery: measuring pin holder, plastic case Version: workshop execution FAQ What materials are the pins made from and why does it matter? The pins are manufactured from zirconia ceramic, which gives the set antimagnetic behaviour and high wear resistance; these properties help preserve diameter and maintain consistent inspection results. Which diameter steps are included in the set? The 101‑piece set covers 1.00–2.00 mm in 0.01 mm increments, providing fine gradation for precise hole gauging and stepwise checks. Is the set suitable for use in a production environment? Yes, the workshop version with a measuring pin holder and plastic case is designed for frequent use in production and toolroom settings where rapid, repeatable checks are required. How does the declared accuracy affect inspection routines? With an accuracy of < ±0.0015 mm, the pins support tight tolerance verification, reducing inspection uncertainty and supporting reliable go/no‑go decisions during quality control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.00 mm Brass Feeler Gauge Set Conical Tips Antimagnetic, Nickel-Plated Sheath - Metav IndustryLine
Take advantage of a compact, reliable gauge set that combines antimagnetic brass construction with a fine 0.05–1.00 mm measuring range for consistent gap control. The thirteen-blade format and 100 mm blade length make the set practical for assembly benches and maintenance tasks. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. M318.014 Brass Feeler Gauge Set – 13 blades, 0.05–1.00 mm (Metav IndustryLine) A M318.014 brass feeler gauge set designed for precise clearance and gap measurement in mechanical assembly, inspection and routine maintenance. Antimagnetic brass blades 13 precision blades 0.05–1.00 mm 100 mm blade length for easy handling Nickel-plated sheath for corrosion resistance Faster gap checks with measurable benefits The compact blade sequence delivers quick, repeatable results for everyday inspection tasks. With a measuring range of 0.05–1.00 mm across 13 blades, the set supports incremental selection of appropriate thicknesses without time-consuming trial-and-error. The nominal accuracy 0.012 mm provides a verifiable tolerance for typical workshop checks, enabling faster decision-making on fit and clearance. This reduces rework and speeds up assembly cycles while keeping measurement uncertainty low. Practical handling and durable construction for daily use The blades are made from brass, kept antimagnetic for use near sensitive components, and are housed in a nickel-plated sheath that resists corrosion in workshop environments. A blade length of 100 mm balances reach and stiffness, so the gauges remain easy to control during inside, outside and step checks. The set format simplifies storage and identification: each blade is marked by nominal thickness, supporting efficient selection and consistent use in production or maintenance routines. Quality assurance that supports the workshop Delivered as a calibrated set to factory standard, the gauges are manufactured for dependable repeatability under normal workshop conditions. The robust material choice and the antimagnetic property preserve performance when used close to electrical assemblies or magnetically sensitive parts. Complementary to the mechanical design, the set is suitable for quick verification of clearances in tooling, fixtures and assemblies where small tolerances matter, ensuring traceable and reproducible measurement outcomes. For purchasing information and application guidance contact Metav Werkzeuge for expert advice and local supply from Emmerich. Technical data Article number: M318.014 GTIN: 4054469127668 Manufacturer: Metav IndustryLine Set composition: 13 blades Facts Measuring range: 0.05–1.00 mm Blade length: 100 mm Blade width: 12.7 mm Accuracy / tolerance: 0.012 mm Pieces per set: 13 Tariff number: 90173000 Special features Material: brass; sheath nickel-plated Antimagnetic Delivered to factory standard Suitable for clearance and gap measurement in assembly and maintenance FAQ What measurement range does this feeler gauge set cover? The set covers a 0.05–1.00 mm range across thirteen discrete blades, allowing for fine selection of gap thicknesses during inspection and assembly with the Metav IndustryLine M318.014 feeler gauge set. Are the blades resistant to magnetic interference? Yes, the blades are antimagnetic, making the set suitable for work near magnetically sensitive components and assemblies. What material are the blades and sheath made from? The blades are manufactured from brass and are supplied with a nickel-plated sheath to improve corrosion resistance in workshop conditions. How long are the individual blades and how does that affect handling? Each blade is 100 mm long, offering a balance of reach and stiffness for controlled inside, outside and step measurements on typical workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.00mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, a compact 1.00 mm diameter and a robust 50 mm length for consistent end‑measurement controls in the workshop; order the part via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.100 — 1.00 mm, ±0.001 mm workshop version (Metav IndustryLine) Gauge pin M323.100 designed for precise end‑measure checks and go/no‑go fit verification in production and inspection environments. Precision ground at ±0.001 mm tolerance 1.00 mm diameter for tight gauge fits 50 mm hardened special‑steel shaft Supplied in protective transport case Reduce rework with micrometre‑level repeatability The gauge pin delivers ±0.001 mm dimensional accuracy, which helps to minimise rework and reject rates during final checks. Manufactured as a workshop version, the shaft is made from special steel and finished to stable running dimensions; this combination ensures consistent contact with bore surfaces and predictable fit behaviour. The compact diameter and high tolerance make this instrument suitable for tight‑fit gauges, small bores and precise end‑measure checks where small deviations can cascade into assembly issues. Robust construction for everyday inspection tasks A 50 mm shaft length paired with hardened material provides both handling comfort and the stiffness required for repeatable checks. The special‑steel composition resists everyday wear and keeps the measuring face stable over many cycles, so quality control procedures remain efficient. As a single, individually supplied test pin, it integrates easily into inspection trays, gauge sets or fixture assemblies without requiring additional adaptation. Practical delivery and traceability for the shop floor Delivery in a protective transport case preserves the finished surface and simplifies storage between uses, reducing the risk of transit damage. The product is identified as M323.100 and carries an ECLASS identifier for procurement and inventory systems, supporting traceable part management on the shop floor. Lightweight and compact, the pin is ready for immediate use in measurement routines and can be combined with existing gauge blocks or fixture tooling to extend inspection capability. For workshop precision and reliable end‑measurement, request the Metav IndustryLine gauge pin M323.100 from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical data Article number: M323.100 GTIN: 4061905055416 ECLASS: 21170231 Label: Gauge pin, single, 1.00 mm, ±0.001 mm, length 50 mm Measurements Diameter: 1.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Materials & features Material: special steel Workshop version Supplied in protective transport case Category: Gauge pins (messstifte) FAQ What tasks is this gauge pin intended for? The M323.100 gauge pin is intended for precise end‑measurement, bore verification and tight‑fit checks in production and inspection settings where ±0.001 mm accuracy matters. What material and finish does the pin have? This test pin is manufactured from special steel with a hardened, precision ground shaft to retain dimensional stability during repetitive use. Is a calibration certificate included with the part? The product data does not specify a calibration certificate; calibration status is not listed for the M323.100 in the provided information. Can the pin be stored and transported safely? Yes, the M323.100 is supplied in a protective transport case to preserve the measuring surface and simplify storage between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01-2.0mm Test Pin Set 101 Pc Step 0.01mm With Pin Holder In Case - Metav IndustryLine
Take advantage of a compact 101-piece gauge pin set that combines fine gradation with workshop-ready organisation; the 1.01–2.00 mm range with 0.01 mm steps and a measured accuracy of ±0.004 mm ensures repeatable gauging. Order the set directly via Metav Werkzeuge or consult our experts for technical matching and delivery. Prüfstift-Satz M318.571 — 101-piece gauge pin set with holder, 0.01 mm gradation (Metav IndustryLine) Prüfstift-Satz M318.571 is a precision gauge pin set for checking bores, fits and small features in inspection and assembly tasks across toolmaking and quality control. 101-piece set for fine measurement Graduated at 0.01 mm for fine steps Measuring range 1.01–2.00 mm Supplied with pin holder and transport case Immediate precision for routine gauging This compact set delivers a tightly graded sequence of pins that fills the smallest gaps in workshop inspection. The 1.01–2.00 mm measuring range in 0.01 mm increments gives a practical span for fine bore checks and fit verification, while the documented ±0.004 mm accuracy provides a reliable basis for pass/fail decisions. The combination of fine graduation and verified accuracy reduces iterative testing and speeds up decision loops on the shop floor. Organised selection and ergonomic handling A purpose-built pin holder and the included transport case keep components accessible and protected during daily use. Clear organisation of the 101-piece assortment shortens set-up times and avoids searching for the right diameter, which translates into better throughput and fewer interruptions. The set’s balanced weight and compact footprint are intended for bench use and mobile inspection tasks in production and maintenance environments. Practical explanation of function and measurement benefit Gauge pins are used to determine bore size by inserting the largest pin that fits without forcing; the incremental 0.01 mm steps allow users to approximate true diameter rapidly. With an accuracy of ±0.004 mm, the set supports fine tolerancing where small deviations matter. For users less familiar with plug gauges, the graded pins act as a tactile reference: a snug fit signals conformity, a play or interference indicates the need for corrective action. Robust material and workshop suitability Manufactured from special steel and supplied as a complete set, the components are intended for regular workshop use; the materials and machining quality give consistent contact geometry over many cycles. Delivered in a transport case, the set remains ready for inspection rounds or for inclusion in a quality-control kit. The design suits toolrooms, small-series production and inspection benches where dependable, repeatable gauging removes uncertainty. For a reliable, ready-to-use gauge solution from Metav IndustryLine order the Prüfstift-Satz M318.571 via Metav Werkzeuge or contact our consultants for assistance with integration into existing inspection procedures and delivery options. Technical data Article number: M318.571 GTIN: 4054469168258 ECLASS: 21170231 Facts Measuring range: 1.01–2.00 mm Graduation: 0.01 mm Accuracy: ±0.004 mm Pieces in set: 101 Weight: 1.48 kg Pin length: 50 mm Special features Material: special steel Supplied with pin holder Delivered in transport case for safe transport Set for bore gauging and fit verification FAQ What sizes are covered by the set? The set covers a continuous range from 1.01–2.00 mm in 0.01 mm steps, allowing close matching to fine bore dimensions. Is the accuracy sufficient for workshop quality control? Yes. The Prüfstift-Satz M318.571 offers an accuracy of ±0.004 mm, which is appropriate for precision inspection and small-part verification in toolmaking and machining. Does the set include a holder and a case? Yes. The set is supplied with a pin holder and a transport case to keep the pins organised and protected during use and storage. What material are the pins made from? The pins are produced from special steel, chosen for dimensional stability and durability in repeated gauging operations. How is the set typically used in inspection? Pins are inserted into a bore until a snug fit is found; the largest pin that fits without forcing indicates the bore size to the nearest 0.01 mm increment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01mm Gauge Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
A compact, high‑precision solution for end‑measurements: the combination of ±0.001 mm tolerance, 1.01 mm diameter and a 50 mm length supports reproducible inspection results and reduces rework. Robust construction in special steel and workshop specification ensure long service life. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin, single, 1.01 mm ±0.001 mm, 50 mm — Metav IndustryLine workshop gauge The gauge pin, single, 1.01 mm ±0.001 mm, 50 mm is a micro‑range reference for end‑measurements and precision inspection in toolrooms, jigs and quality control benches. Diameter 1.01 mm with ±0.001 mm tolerance 50 mm length for deeper reference measurements Special steel for sustained dimensional stability Workshop design for everyday metrology use Reduce measurement uncertainty with micrometre precision Reliable production depends on measurable tolerances. The gauge pin offers a ±0.001 mm tolerance (1 µm), turning critical pass/fail checks into dependable decisions. This level of accuracy moves the tool from simple go/no‑go control to a reference that supports traceable checks and reduces the need for rework. The 1.01 mm nominal diameter is produced and inspected to tight limits, providing a stable datum for bore checking and calibration stands without frequent replacement. Built for regular workshop use and long service life Durability matters when inspection tools are handled every day. Constructed from special steel, the pin resists wear and preserves diameter stability across repeated insertions. The 50 mm length is practical for deeper reference measurements and for use in fixtures where short pins are insufficient. The workshop specification ensures a balance between toughness and finished surface quality, helping to maintain consistent contact conditions and minimise operator‑induced error. Micro‑range classification and practical application guidance This instrument sits in the micro range of measuring artefacts, ideal for fine mechanical parts, small bores and precision assemblies. Classified for extremely compact measurement tasks, it suits inspection of small components in watchmaking, precision moulded parts and fine engineering. When used as a reference gauge, the pin provides a reproducible datum; paired with calibrated comparators or micrometres, it streamlines quality control and supports documented inspection routines. The article number M323.101 identifies the exact specification for procurement and inventory. Request tailored application support or procurement through Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or info@metav-werkzeuge.com for the Metav IndustryLine M323.101 gauge pin Technical data Article number: M323.101 GTIN: 4061905055423 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.01 mm Length: 50 mm Tolerance/Accuracy: ±0.001 mm Weight: 0.003 kg Measurement range min/max: 1.01 mm / 1.01 mm Materials & special features Material: special steel Workshop version Single piece gauge pin Eclass: 21170231 Story trigger: endmasse FAQ What level of precision does this gauge pin provide? The gauge pin delivers a tolerance of ±0.001 mm, equating to a micrometre‑level reference suitable for fine inspection tasks and precision control. Can this pin be used for bore checking and deeper reference points? Yes, the 50 mm length is suitable for deeper bores and provides a stable datum for many inspection setups when using the Metav IndustryLine M323.101. What material is the pin made from and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to maintain consistent measurement performance over repeated use. Is this gauge pin intended for heavy industrial use or precision workshops? Classified in the micro‑range, the pin is optimised for precision workshops, toolrooms and inspection benches where small, highly accurate references are required. How is the exact article identified for ordering or stock control? Use article number M323.101 or GTIN 4061905055423 to specify the exact gauge pin version when ordering or checking inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01–2 mm Gauge Pin Set 100 Pieces, Step 0.01 mm, Special Steel, Supplied in Case - Metav IndustryLine
Benefit from a compact, high-resolution set that combines consistent 0.01 mm increments, special-steel durability and organised storage to streamline hole and fit inspections. Order the set directly via Metav Werkzeuge or request tailored advice from our consultants. Gauge Pin Set M318.551 – 1.01–2.00 mm, 0.01 mm increments (Metav IndustryLine) The Gauge Pin Set M318.551 offers finely stepped pins for precise fit checks and calibration tasks in small-bore metrology applications Precision steps of 0.01 mm Hardened special steel construction Supplied in protective transport case Ensure reproducible measurement with fine grading The set’s 0.01 mm pitch gives reliable intermediate sizes for systematic inspection and adjustment. Each pin increases diameter in uniform increments, which simplifies narrowing down the correct fit and reduces iteration time during setup. With an indicated accuracy of ±0.002 mm, the set supports tight tolerance workflows common in toolmaking and precision assembly; this level of repeatability helps to lower scrap rates and speeds up pass/fail decisions on the shop floor. The measured grading is therefore a direct contributor to process efficiency and quality assurance. Robust materials and practical handling Pins are manufactured from special steel, offering wear resistance and dimensional stability for repeated use. A standard pin length of 50 mm provides sufficient engagement for most bore checks while remaining convenient to handle. The set is delivered in a protective transport case, which keeps items organised and minimises handling damage during storage or movement between measuring benches. This combination of material choice and packaging translates into lower lifetime costs through extended service life and fewer replacements. Designed for applied metrology and quick checks Covering the 1.01–2.00 mm range with 100 pins, the set facilitates fine-grained verification tasks such as plug checks, gauge calibration aids and set-up validation for microcomponents. The compact diameter span suits small-bore inspection in watchmaking, medical device manufacture and precision electronics, where rapid identification of the correct size supports lean workflows. Using dedicated pins rather than temporary shims shortens machine downtime and provides a clear, verifiable standard for acceptance criteria. Proven partner quality for consistent supply As part of the Metav IndustryLine offering, this gauge set is intended for routine quality-control programmes that demand traceable, robust tooling. The organised assortment and clearly defined increments reduce human error in size selection and enable consistent documentation of measurement results. The product’s construction and packing emphasise operational reliability, making it a pragmatic choice where accuracy and workflow continuity are priorities. Contact Metav Werkzeuge for specification matching and arrange delivery of the M318.551 gauge pin set from Emmerich, or speak to our advisors for recommendations tailored to your inspection tasks Technical data Article number: M318.551 GTIN: 4054469129341 Manufacturer: Metav IndustryLine Customs tariff number: 90173000 Facts Diameter range: 1.01–2.00 mm Step/increment: 0.01 mm Accuracy: 0.002 mm Pin length: 50 mm Pieces per set: 100 Weight: 1.8 kg Special features Material: special steel Supplied in protective transport case for transport and storage Classification: Messstifte / Lehren (pin gauges / gauge pins) ECLASS: 21170231 FAQ What diameter range and increments does the set cover? The set covers diameters from 1.01 to 2.00 mm in 0.01 mm increments, allowing fine selection for small-bore inspections. How many pins are included and what is the pin length? The set contains 100 pins with a standard pin length of 50 mm, organised for easy retrieval and use. What material are the pins made from and how durable are they? Pins are made from special steel, chosen for wear resistance and dimensional stability under routine inspection loads. Is the set suitable for precision assembly and toolmaking? Yes, the fine grading and stated accuracy make the set well suited to precision assembly, toolmaking and micro-component inspection. How is the set supplied for transport and storage? The pins are supplied in a protective case designed for safe transport and organised storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.02mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of micro-scale accuracy (±0.001 mm) combined with a compact 1.02 mm diameter and a robust 50 mm special-steel body for repeatable end-face checks; order via Metav Werkzeuge or ask the consultants for application guidance. Gauge pin M323.102 — 1.02 mm, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.102 is a single precision test pin designed for micro-dimension verification and end-face inspection in workshop and quality-control environments. Precision tolerance ±0.001 mm Diameter 1.02 mm for tight fits 50 mm special-steel length for stability Delivered in a transport case Reliable micro-dimension verification A compact inspection tool that delivers consistent dimensional control for small bores and end surfaces. With a certified manufacturing tolerance of ±0.001 mm, this test pin supports tight acceptance criteria and reduces sorting effort during incoming inspection. The 1.02 mm nominal diameter and 50 mm shank length provide a practical contact length for many small-part assemblies, while the special-steel construction contributes to dimensional stability under typical workshop conditions. Designed for repeatable checks, the pin converts a measured specification into a verifiable, tangible standard. Workshop-ready protection and handling Engineered as a robust workshop version, the test pin is supplied as a single item and packaged for safe transport. The compact mass simplifies handling during routine inspection and bench work, and the supplied transport case protects the pin from damage and contamination between uses. The single-piece delivery reduces inventory complexity and allows direct integration into a measuring set-up or fixture, improving workflow efficiency in both small-batch production and maintenance tasks. Practical use and inspection workflow Ideal for precision assembly and quality-control sequences, the M323.102 facilitates fast go/no-go checks, alignment trials and end-dimension verification on microcomponents. Measurement personnel benefit from a straightforward reference that minimises interpretation and recalibration cycles; the pin is particularly suited to inspection benches where repeatability and clear pass/fail criteria are required. When traceable standards are needed, the compact gauge pin integrates easily into documented inspection routines and parts documentation for consistent results across shifts. For precision end-measurement tasks, choose the Metav IndustryLine gauge pin M323.102 and contact Metav Werkzeuge in Emmerich for procurement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.102 GTIN: 4061905055966 Category: Gauge pin (Messstifte) Brand: Metav IndustryLine Weight: 0.003 kg Material: Special steel Facts Diameter: 1.02 mm Tolerance: ±0.001 mm Length: 50 mm Mass (net): 0.003 kg Special features Workshop version Single-piece delivery Delivered in transport case Intended for end-dimension checks FAQ What accuracy does the gauge pin offer? The M323.102 gauge pin from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm, suitable for high-precision inspection tasks. What are the nominal diameter and length of the pin? The pin features a 1.02 mm diameter and a 50 mm overall length, giving a reliable contact length for small-bore and end-face checks. Is the product supplied ready for workshop use? Yes — the workshop-version test pin is supplied as a single item and is delivered in a transport case to protect the measuring surface during storage and transport. Which inspection tasks suit this test pin best? The gauge pin is intended for micro-dimension verification, end-dimension checks, alignment trials and pass/fail inspection of small components where a fixed, repeatable reference is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.03mm Test Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high repeatability and workshop-ready protection: the precise Ø 1.03 mm dimension combined with an ±0.001 mm tolerance ensures reliable end‑measurement results, while delivery in a protective transport case keeps the gauge safe during storage and transit. Order the pin directly via Metav Werkzeuge or consult the technical team for specification advice. Gauge pin M323.103 — Workshop gauge pin, Ø 1.03 mm, ±0.001 mm, 50 mm A gauge pin M323.103 designed for accurate end‑measurements and bore inspection in workshop and inspection environments Workshop version, robust finish Diameter 1.03 mm with ±0.001 mm accuracy Supplied in protective transport case Precision that reduces rework and speeds inspection This workshop gauge pin delivers an exceptionally tight nominal diameter of Ø 1.03 mm with a verified ±0.001 mm tolerance, making it suitable for acceptance testing and go/no‑go verification where small clearances are critical. The narrow tolerance reduces measurement uncertainty and supports repeatable sampling in quality routines, so batch inspection becomes faster and less prone to false rejects. Bold, measurable accuracy like this directly contributes to process stability and lower downstream rework. Built for repetitive use in busy inspection workflows Manufactured from special steel and specified as a workshop version, the pin stands up to routine handling and repeated insertion cycles without rapid wear. The compact 50 mm length provides a stable gripping area while keeping the measuring end accessible for small bores and fixtures. Delivered in a protective transport case, the item is protected during storage and transport, preserving its dimensional integrity between uses and reducing downtime for replacement. Practical advantages for quality control and fixtures As a single‑piece gauge, the pin is ideal for end‑measurement tasks in tooling set‑up, bore verification and end‑mass checks. The precise diameter and minimal tolerance enable confident conformity decisions at first glance, supporting faster throughput on the shop floor. The compact format simplifies handling in tight assemblies and makes the pin a reliable reference for maintenance checks and fixture validation without complex calibration procedures. Choose the Metav IndustryLine gauge pin for dependable ±0.001 mm inspection accuracy; contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for delivery, availability and specification guidance Technical data Article number: M323.103 GTIN: 4061905055973 Label: Gauge pin, single, 1.03 mm, ±0.001 mm, length 50 mm Facts Diameter: 1.03 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: special steel Version: workshop execution Delivery: protective transport case Category: gauge pins Supply: single pin FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.103 offers an accuracy of ±0.001 mm, suitable for precision end‑measurements and tight tolerance checks. Is the pin suitable for repeated use in a production environment? Yes, the workshop execution and special steel construction of the M323.103 are chosen to withstand routine handling and repeated insertion cycles. Can this pin be used for bore and hole verification? The diameter and tolerance of the M323.103 make it well suited for bore inspection, end‑mass checks and fixture validation in workshop inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.04mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Precision and compactness combine in this inspection pin: 1.04 mm diameter with ±0.001 mm tolerance and a 50 mm length provide reproducible micro‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Inspection pin M323.104 — Gauge pin, 1.04 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Inspection pin M323.104 is a workshop‑grade gauge pin for end‑dimension verification and fine mechanical inspection tasks, designed for micro‑component control and repeatable production checks. Workshop grade construction Diameter 1.04 mm, tolerance ±0.001 mm 50 mm length for confined measurements Supplied in protective transport case High-precision performance that lowers rework rates The M323.104 inspection pin delivers ±0.001 mm tolerance in a compact format, making it suitable where reproducible small‑scale measurements are critical. Manufactured from special steel, the pin resists wear and keeps gauge repeatability high; this reduces scrapped parts and lowers inspection time per component. The combination of fine tolerance and robust material translates into fewer measurement uncertainties and a smoother quality workflow. Micro-range design for delicate measuring tasks Classified in the Micro range, the pin’s 1.04 mm diameter and 50 mm length suit confined measuring points, such as bores, pin seats and fine mechanical assemblies. The slim profile allows access where standard gauges cannot reach, while maintaining handling stability for handheld inspection. Using a dedicated gauge pin for end‑dimension checks simplifies calibration chains and provides a clear reference when setting up inspection routines for small parts. Workshop‑ready handling and protected transport Built as a workshop version, the pin arrives supplied in a transport case, which protects the gauge during storage and transit — the case is intended for transport rather than long‑term archive storage. At roughly 0.003 kg the pin is easy to position without inducing bending, and the solid special steel construction balances rigidity with surface endurance. This practical configuration supports fast inspection cycles on the shop floor and helps maintain consistent measuring procedures across shifts. Choose the Metav IndustryLine inspection pin for dependable micro‑measurement control — contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M323.104 GTIN: 4061905055980 Facts Diameter: 1.04 mm Length: 50 mm Accuracy/tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop version (Werkstatt‑Ausführung) Supplied in transport case Category: Gauge pins / Inspection pins FAQ What accuracy can be expected from this inspection pin? The inspection pin M323.104 offers a tolerance of ±0.001 mm, providing high‑precision checks suitable for micro‑dimension control. Which materials is the pin made from? The M323.104 is manufactured from special steel, chosen for wear resistance and dimensional stability in repeated inspection use. Is this pin suitable for measuring very small bores and seats? Yes, with a 1.04 mm diameter and 50 mm length the gauge pin is intended for confined measuring points, particularly in micro‑component inspection. How is the pin delivered and handled on the shop floor? The inspection pin M323.104 is supplied in a protective transport case and designed as a workshop version for robust handling during routine inspections. What category does this instrument fall into for measurement planning? This gauge pin belongs to the Micro range, intended for ultra‑compact precision tasks in fine mechanical and watchmaking contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.05mm Test Pin Length 50mm ±0.001mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of ultimate dimensional accuracy, compact handling and workshop-ready design to streamline final inspections and reduce rework. The high-precision tolerance and compact length make this pin ideal for rapid go/no-go checks and repeatable bore verification. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Metav IndustryLine Gauge Pin M323.105 — 1.05 mm, ±0.001 mm, 50 mm The gauge pin M323.105 is a single precision verification pin for end‑measurements and bore checks in workshop and production environments. Precision ±0.001 mm tolerance Diameter 1.05 mm for fine bore checks Length 50 mm for stable insertion depth Workshop execution for robust daily use Reliable accuracy for final inspection and sorting A tolerance of ±0.001 mm positions this pin in the category of high‑precision verification tools, offering measurable improvements in decision confidence during final inspection. The nominal 1.05 mm diameter and 50 mm length create a stable contact zone that minimises play in small bores, which helps to reduce false rejects and rework. Made from special steel, the pin maintains dimensional integrity under routine handling; its low mass supports swift manual checks while preserving repeatability across multiple cycles. Built for everyday workshop handling and throughput Designed as a workshop execution item, the pin balances robustness with ease of use. The compact form factor supports quick insertion and withdrawal in production jigs and handheld checks, improving process throughput without sacrificing control. With a listed mass of 0.003 kg, handling is comfortable and fatigue is reduced during repetitive testing tasks. The single‑piece configuration suits bench auditing, assembly line spot checks and integration into go/no‑go fixtures, delivering practical benefits where time and reliability matter. Integrates simply into quality routines and documentation For quality managers and inspection technicians, the pin acts as a straightforward tool for end‑dimension verification and rapid functional gauging. Identification via SKU and GTIN streamlines inventory and traceability within existing systems, while the clear specification of ±0.001 mm helps define acceptance criteria in inspection plans. Use the pin for acceptance testing, inbound inspection of small components or routine spot checks to establish objective, repeatable results that support process stability and reduce downstream variance. Contact Metav Werkzeuge today to discuss supply options for the Metav IndustryLine gauge pin M323.105 and to obtain advice on integrating these pins into existing inspection procedures Technical data Article number: M323.105 GTIN: 4061905055997 Brand: Metav IndustryLine Category: Messstifte Numbers / core technical data Diameter: 1.05 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Material: Special steel Execution: Workshop version Application: End gauges and bore verification FAQ What tolerance does this gauge pin provide? The gauge pin M323.105 is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision verification tasks. Which material is used for the pin? This single pin is manufactured from special steel, chosen for dimensional stability and suitability for workshop use. For which tasks is the pin intended? The pin is intended for end‑measurement and bore checks, serving as a compact verification tool for go/no‑go checks and final inspection. How is the product identified for ordering and stock control? The product is listed as SKU M323.105 with GTIN 4061905055997 for straightforward ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.06mm Gauge Pin Length 50mm ±0.001mm Workshop Option - Metav IndustryLine
Take advantage of high repeatability and micrometre-level tolerance together with robust workshop design for dependable in‑fixture measurement. Order the test pin directly via Metav Werkzeuge or consult the specialists for integration advice. Test pin M323.106 — 1.06 mm diameter, ±0.001 mm tolerance A single test pin for precise locating and end‑size checks in fixtures and gauges, designed as a workshop version with a 50 mm shank for secure clamping and handling Diameter 1.06 mm ±0.001 mm Length 50 mm workshop version Made from special steel Delivered in a transport case Micrometre-grade accuracy for repeatable inspections The M323.106 delivers a diameter of 1.06 mm with a narrow tolerance of ±0.001 mm, providing the kind of dimensional certainty required for short‑run gauging and end‑size verification. Such a tight tolerance reduces measurement uncertainty and supports consistent pass/fail decisions on production lines. Using a hardened, stable pin core minimises wear and keeps contact geometry predictable, which in turn preserves repeatability in fixtures and plug checks. Robust workshop construction reduces downtime Built as a workshop version, this single test pin combines a hardened special steel shank with a practical 50 mm length for reliable clamping in common fixture blocks. The chosen material and heat treatment deliver resistance to surface damage and maintain roundness under cyclic contact, so maintenance intervals are extended and replacement frequency is reduced. The compact, single‑piece design simplifies installation in inspection rigs and reduces handling time during batch checks. Practical handling and storage for production environments The pin is supplied in a transport case, protecting the precise measuring face from knocks and contaminants during storage and transit. The 50 mm length offers ample engagement for most gauge blocks and fixture pockets while keeping the exposed portion short enough to limit bending or deflection during manual handling. Clear labelling and a stable case mean the pin can be stored alongside complementary gauges, keeping inspection tools organised and immediately available when quality checks are required. Designed for integration into inspection processes Ideal for inclusion in go/no‑go fixtures, punch gauges or as replacement locating pins, this component supports fast, reliable verification of small bores and end sizes. Its geometry is optimised for repeat contact and easy cleaning; the nominal diameter and tolerance match common inspection plans where micrometre precision is required. When fitted into a hardened pocket or bush, the pin helps maintain positional accuracy and contributes directly to traceable measurement results. For immediate procurement or technical integration support, contact Metav Werkzeuge in Emmerich — Metav IndustryLine stockists can advise on fixture compatibility and delivery options Technical data Article number: M323.106 GTIN: 4061905056000 Weight: 0.003 kg Material: Special steel Facts Diameter: 1.06 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Special features Workshop design Supplied in transport case (plastic or wooden) Single test pin for fixture and gauge use FAQ What is the intended use of this test pin? The test pin M323.106 is intended for precise locating and end‑size verification in gauges, fixtures and plug checks where a 1.06 mm diameter reference is required. How precise is the pin and how does that affect measurements? With a stated tolerance of ±0.001 mm, the pin provides micrometre‑level reference geometry that reduces measurement uncertainty and supports consistent pass/fail decisions in inspection processes. What material is the pin made from and why is that important? The pin is manufactured from special steel chosen for surface hardness and wear resistance, which helps preserve roundness and contact geometry during repeated use. Is the pin delivered ready for storage and transport? Yes, the pin is supplied in a transport case to protect the measuring face and maintain traceability and cleanliness during storage and transit. Can this pin be used in automated fixtures? The solid, compact geometry and tight tolerance make the pin suitable for integration into automated and manual fixtures alike, provided the fixture accepts the 50 mm shank length and 1.06 mm diameter Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.07mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 1.07 mm diameter and a 50 mm working length for reliable end‑measure checks in workshop environments; order the probe directly via Metav Werkzeuge or consult the technical team for application advice. Test pin M323.107 — workshop‑grade inspection pin, 1.07 mm diameter, ±0.001 mm The Test pin M323.107 serves as a compact, workshop‑grade cylindrical gauge for end‑measure verification, fixture alignment and repeatable positional checks in precision inspection tasks. Diameter 1.07 mm precision pin Tolerance ±0.001 mm Length 50 mm workshop grade Precision that reduces rework and inspection time The small‑diameter probe is designed for tasks that demand true microscopic accuracy; with a diameter of 1.07 mm and an accuracy of ±0.001 mm the component delivers measurement certainty that shortens decision cycles on the shop floor. The narrow gauge form factor minimises probing intrusion while enabling repeatable positional checks, so throughput improves without sacrificing quality. For process engineers and quality technicians, that precision translates directly into fewer rejected batches and less time spent on corrective actions. Robust construction for frequent use Manufactured from special steel, the pin is hardened and finished for abrasion resistance and dimensional stability under repeated contact. The 50 mm length offers comfortable handling and sufficient reach for most fixture and jig situations while keeping the probe stiff and easy to locate. In workshop environments where tools are subject to frequent handling, this robust construction supports consistent results over many cycles and reduces the need for frequent replacements. Integrates simply into inspection workflows The compact probe form is compatible with common pin‑holder systems and can be used for end‑stop verification, positional referencing and comparative checks across small bores and recesses. Its workshop grade specification means it is ready for integration into inspection fixtures without elaborate adaptation. Where traceability is required, the pin’s clear nominal and tolerance data aid documentation and quality records, supporting routine measurement protocols and audit trails. For workshop‑grade precision from Metav IndustryLine, request supply of the M323.107 via Metav Werkzeuge or consult the Metav technical advisers at info@metav-werkzeuge.com to confirm fitment and application suitability. Technical data Article number: M323.107 GTIN: 4061905056864 Manufacturer: Metav IndustryLine Facts Diameter: 1.07 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Label: Test pin, single FAQ What materials is the M323.107 suitable for measuring? The M323.107 is a measurement probe intended for positional and end‑measure checks and is material‑agnostic as a gauge; its special steel construction ensures durability when used against typical workshop materials. Is the accuracy of ±0.001 mm sufficient for small‑part inspection? Yes, the ±0.001 mm tolerance positions the probe for high‑precision checks on small parts where micron‑level repeatability is required for process control. Can the pin be used in existing fixture holders? The probe’s standard cylindrical form and 50 mm length make it compatible with common pin holders and fixture systems designed for small‑diameter gauges. How does the material affect long‑term dimensional stability? Made of special steel, the probe resists wear and maintains dimensional stability under repeated contact, which supports consistent measurement performance over many cycles. Is the M323.107 suitable for comparative or reference checks? Yes, the compact gauge is ideal for reference positioning and comparative inspections where a defined, repeatable contact point is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.08mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
High repeatability and a compact profile make inspection tasks faster and more reliable; the high ±0.001 mm tolerance and 1.08 mm diameter give precise end‑measure results while the 50 mm length reaches confined bores. Order the Test pin directly via Metav Werkzeuge or ask our consultants if needed Metav IndustryLine Test pin M323.108 — 1.08 mm, ±0.001 mm, 50 mm Test pin M323.108 for precision end‑measure checks and fine‑bore inspections in workshop environments ±0.001 mm tolerance for high precision Diameter 1.08 mm for fine inspection 50 mm length for confined bores Workshop‑grade special steel construction Precision that reduces rework and saves inspection time The Metav IndustryLine Test pin M323.108 is designed for metrology tasks where small deviations matter: the nominal 1.08 mm diameter combined with a ±0.001 mm tolerance supports highly repeatable measurements and tighter control of production tolerances. By using a gauge pin with such low variance, supply‑chain checks and final inspections deliver fewer false rejects, which improves throughput and reduces scrap. The compact geometry offers straightforward positioning in typical inspection jigs and receptacles, ensuring the measurement process stays efficient without complicated fixtures. Robust workshop construction for reliable handling Manufactured from special steel and offered in a workshop execution, the pin pairs durability with fine‑dimensional stability. The 50 mm length provides sufficient reach for many end‑measure applications while keeping the pin stiff and easy to handle, reducing bending risk during insertion. The robust material choice resists wear in standard inspection use, so calibration intervals remain predictable and tool life increases. This construction supports consistent contact between pin and workpiece, which is essential for trustworthy readings and dependable quality control processes. Integrates into inspection routines and improves traceability As a single test pin, the component suits serial quality checks, post‑machining verifications and gauge comparison tasks where a compact reference element is required. The clear specification of ±0.001 mm tolerance and nominal diameter simplifies documentation and traceability within quality systems, making it easier to justify measurement outcomes in production records. For workshop managers and metrology technicians, the combination of precise specifications and robust materials streamlines the choice of reference elements and contributes to a measurable improvement in first‑pass yield. Contact Metav Werkzeuge for application advice and to secure the Metav IndustryLine Test pin M323.108 for your precision inspection tasks Technical data Article number: M323.108 GTIN: 4061905056871 Brand: Metav IndustryLine Core data Diameter: 1.08 mm Tolerance / accuracy: ±0.001 mm Length: 50 mm Weight: 0.003 kg Materials & features Special steel Workshop execution Single test pin FAQ What tolerance does this test pin provide? The Metav IndustryLine Test pin M323.108 is specified with a tolerance of ±0.001 mm, suitable for high‑precision inspection tasks. What is the nominal diameter and length of the pin? The pin has a nominal diameter of 1.08 mm and a length of 50 mm, dimensions given for integration into standard gauge setups. From which material is the pin made? This test pin is manufactured from special steel, offering durability for routine workshop inspection. Is the item supplied individually or in a set? The product is supplied as a single test pin, described as an individual item for single‑point reference use. What identifiers should be used when ordering or documenting the pin? Use SKU M323.108 and GTIN 4061905056871 when ordering or recording the test pin in quality documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.09mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of extreme dimensional control and compact handling for reliable in‑process checks; the 1.09 mm diameter and ±0.001 mm tolerance provide repeatable go/no‑go verification—order directly via Metav Werkzeuge or contact our consultants for integration advice. Metav IndustryLine Single gauge pin 1.09 mm – ±0.001 mm tolerance, 50 mm length The single gauge pin 1.09 mm is a workshop‑grade precision test pin for fast end‑dimension checks and fit verification in small bores and component assemblies. Workshop‑grade design for daily use High precision ±0.001 mm tolerance Diameter 1.09 mm in special steel Compact 50 mm length for easy handling Secure fit control with micrometre accuracy A finely manufactured gauge pin with a ±0.001 mm tolerance gives shops a reliable benchmark for small‑bore inspections and fit checks. The extremely tight tolerance translates into fewer assembly surprises and reduced rework because measurement uncertainty is minimised; this level of precision supports efficient acceptance testing and shortens decision cycles on the shop floor. The small diameter is ideal for confirming end dimensions and verifying plug fits where even minor deviations matter. Robust construction for everyday workshop use Built in a workshop‑grade configuration from special steel, the pin balances wear resistance with convenient handling. Its 50 mm length provides adequate engagement for through‑checks and short bores while keeping the tool manoeuvrable in confined set‑ups. Low mass supports safe, repeatable measurements and reduces operator strain during frequent checks—practical for production lines and maintenance benches alike. Simple integration into quality routines The compact geometry and consistent diametric control make the gauge pin straightforward to include in existing inspection sequences or fixture checks. Clear numeric specification reduces interpretation time in documentation and enables traceable records when combined with usual inspection practices. For traceability and inventory, the item is listed under SKU M323.109 and carries a GTIN for procurement and stock management. Contact Metav Werkzeuge for availability, sample requests or to discuss how the Metav IndustryLine M323.109 can be incorporated into current inspection routines Technical data SKU: M323.109 GTIN: 4061905056888 Material: Special steel Diameter: 1.09 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Numeric data Diameter: 1.09 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg EClass: 21170231 Special features Workshop version Category: Gauge pins Precision grade for end‑dimension checks Story trigger: end dimensions FAQ What applications is this gauge pin suited for? The gauge pin is intended for small‑bore checks, plug fit verification and end‑dimension inspection in metalworking and precision assembly; the Metav IndustryLine gauge pin M323.109 is particularly useful where micrometre‑level control is required. How precise is the diameter of the pin? The diameter is specified at 1.09 mm with a tolerance of ±0.001 mm, giving consistent reference dimensions for tight‑tolerance inspections. What materials can this pin be used with? The pin is manufactured from special steel, suitable for use in contact checks against common machining materials; it is designed as a durable reference, not as a cutting tool. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.1/2" Thread Plug Gauge UNC 6 TPI ANSI B1.1 2B - Metav IndustryLine
Take advantage of a precision inspection tool that combines hardened gauge steel construction, compliance with ANSI/ASME B1.1 and a clear 2B tolerance for reliable internal thread verification; order the item directly via Metav Werkzeuge or consult our advisers for technical matching to production requirements. Thread plug gauge UNC 1½" x 6 TPI — Thread plug gauge, ANSI/ASME B1.1, 2B (Metav IndustryLine) The Thread plug gauge UNC 1½" x 6 TPI, 2B is a purpose-made inspection gauge for rapid verification of internal UNC threads in production and incoming inspection environments. Hardened gauge steel construction Conforms to ANSI/ASME B1.1 threads Tolerance class 2B for internal threads 1½" UNC with 6 TPI pitch Rapid, standard-compliant checks that reduce rework Designed for fast go/no-go inspection, this gauge supports immediate acceptance decisions on UNC internal threads. With conformity to ANSI/ASME B1.1, inspections follow established thread geometry standards so measurement uncertainty is reduced and documentation requirements are straightforward. The clear pass/fail nature of the tool shortens inspection time, improving throughput while safeguarding component compatibility. Durable materials for long service life Constructed from hardened gauge steel, the gauge resists wear in repetitive use and preserves its functional dimensions over many cycles. This material choice gives stable contact surfaces and predictable behaviour under normal workshop handling. The resulting durability lowers replacement frequency and supports consistent checking procedures across batches, which is beneficial for production environments requiring repeatable quality control. Precise tolerance interpretation for internal threads Tolerance class 2B identifies the acceptance range for internal threads and aligns with common engineering practice for UNC fastenings. Using this gauge provides an unambiguous statement about whether an internal thread meets the defined tolerance band, avoiding subjective judgments. The 1½" UNC size with 6 TPI is suitable for large assemblies where thread fit and mechanical integrity are critical, ensuring reliable assembly performance. Integrating the gauge into inspection routines Implementation is straightforward: use the gauge as a go/no-go reference during incoming inspections, in-process checks or final quality control. The compact, single-piece design makes handling simple and fast, and the weight and balance facilitate stable seating in the thread. Regular visual inspection and scheduled interchange with calibrated masters will maintain confidence in inspection outcomes and support traceable quality records. Contact Metav Werkzeuge GmbH in Emmerich for availability, technical matching and ordering of Metav IndustryLine gauges including the M315.935 Technical Data Article number: M315.935 GTIN: 4054469179902 Weight: 0.8 kg Material: gauge steel, hardened Standard: ANSI/ASME B1.1/B1.2 Tolerance class: 2B Pitch: 6 TPI Size: 1 1/2" Customs tariff number: 90173000 Facts Size (inch): 1½" Thread pitch: 6 TPI Tolerance: 2B Weight (kg): 0.8 Special features Conforms to ANSI/ASME B1.1/B1.2 Application: verification of internal UNC threads Product category: thread plug gauge / gauges Manufacturer: Metav IndustryLine FAQ How is the gauge used for go/no-go inspection? The gauge is applied by seating the plug into the internal thread: the go end must engage fully for acceptance while the no-go end must not enter beyond its limit; the M315.935 from Metav IndustryLine serves as a quick verification tool for UNC internal threads. What does tolerance class 2B mean for internal threads? Tolerance class 2B specifies the internal thread fit and allowable form variations for standard UNC threads; the 2B designation used with this gauge ensures compatibility with corresponding external threads manufactured to the matching class. Is this gauge compliant with recognised thread standards? Yes — the gauge conforms to ANSI/ASME B1.1, ensuring dimensional compatibility with industry-standard UNC thread profiles and making it suitable for regulated production environments. What material and durability can be expected? Made from hardened gauge steel, the gauge is engineered for wear resistance and long-term dimensional stability under routine inspection cycles, supporting sustained accuracy for batch checks. For which applications is this plug gauge suitable? The gauge is intended for production and incoming inspection of larger UNC threaded components, assemblies and fixtures where a 1½" UNC, 6 TPI specification and reliable internal-thread verification are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.1/2" UNEF Thread Go/No-Go Ring Right-Hand 18 TPI ANSI B1.1/B1.2, Hardened Gauge Steel - Metav IndustryLine
Take advantage of a robust inspection tool that combines ANSI conformity, hardened gauge steel construction and a clear No‑Go limiting function to reduce rework and speed up batch acceptance. The compact No‑Go ring protects production against out‑of‑tolerance threads and supports rapid pass/fail decisions on the shop floor; order directly via Metav Werkzeuge or consult the Metav team for specification matching. Gewinde‑Lehrring UNEF NOGO, 1.1/2 x 18 ANSI B1.1 / 2A — Thread ring gauge, UNEF No‑Go, Metav IndustryLine Gewinde‑Lehrring UNEF NOGO, 1.1/2 x 18 ANSI B1.1 / 2A is a workshop inspection gauge for rapid verification of external threads, designed for production and incoming inspection of parts with fine UNEF threads. UNEF No‑Go ring, 1 1/2" x 18 ANSI B1.1/B1.2 compliant tolerance Hardened gauge steel construction Right‑hand thread, tolerance class 2A Fast, unambiguous thread assessment to reduce downtime A dedicated thread ring gauge with a No‑Go function provides immediate, binary results for threaded components: either the thread is acceptable or it must be reworked. The No‑Go characteristic simplifies operator decisions, minimising subjective judgement and speeding throughput on the production line. Built in hardened gauge steel, the ring resists wear during repeated checks so calibration intervals are extended and measurement integrity is preserved. For shops handling standard fittings and components, this form of gauging is the most efficient way to prevent out‑of‑tolerance parts reaching assembly. Designed for repeatability and shop‑floor resilience This inspection ring is manufactured to the ANSI B1.1/B1.2 thread form and specified tolerance class 2A, ensuring compatibility with American UNEF screw threads. The defined 1 1/2" x 18 size and right‑hand thread are clearly marked to avoid mix‑ups during inspection routines. Its compact footprint and a mass around 0.7 kg make it easy to use at incoming goods or final inspection benches. Because gauging relies on mechanical limits rather than electronics, the method remains robust under industrial conditions and is ideal where simple, reproducible checks are required at high cadence. Integration into quality processes and supplier control Adopting a calibrated No‑Go ring as part of a quality plan supports traceability and supplier assurance. When a part fails the No‑Go check it signals a clear non‑conformance that can be tracked back to process parameters or supplier batches, reducing subjective rejection rates and enabling targeted corrective actions. The combination of standard conformity and durable materials makes this gauge suitable for repetitive usage in inspection rooms and production lines, reinforcing documented acceptance criteria and helping to maintain consistent assembly quality. For secure and standard‑compliant thread inspection choose the Metav IndustryLine No‑Go ring and contact Metav Werkzeuge GmbH in Emmerich for application advice or to request the matching inspection equipment and documentation. Technical Data Article number: M315.995.EF GTIN: 4054469181196 Mass: 1 1/2" Weight: 0.7 kg Material: Lehrenstahl, hardened Standard: ANSI/ASME B1.1/B1.2 Pitch: 18 Tolerance class: 2A Label: Gewinde‑Lehrring UNEF NOGO, 1.1/2 x 18 ANSI B1.1 / 2A SKU: M315.995.EF Facts Thread form: UNEF Hand: Right‑hand thread Function: No‑Go (NOGO) inspection ring Application area: Threaded parts inspection, incoming goods, in‑process control Special features Hardened gauge steel construction Suited for shop‑floor repetitive checks Clear identification to avoid mix‑ups Compact format for bench or portable inspection FAQ What is the primary use of this No‑Go ring gauge? The Gewinde‑Lehrring UNEF NOGO, 1.1/2 x 18 ANSI B1.1 / 2A is intended for quick pass/fail verification of external UNEF threads, used in incoming inspection and production control to detect out‑of‑tolerance threads. Does the gauge comply with industry standards? Yes. The ring is manufactured to ANSI B1.1/B1.2 specifications and produced to tolerance class 2A, ensuring its suitability for standard UNEF thread checks. What material is the inspection ring made from? This No‑Go ring is made from hardened gauge steel, selected for wear resistance and long service life under frequent use. Can this gauge be used for left‑hand threads? No; this particular ring is a right‑hand thread tool. Left‑hand variants must be specified separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.1/2" x 12 UNF Nogo Thread Ring Gauge, Right-Hand, ANSI/ASME B1.1/B1.2, Hardened Gauge Steel - Metav IndustryLine
Take advantage of precise, standards‑compliant thread control together with robust, hardened construction for dependable pass/fail checks on the shop floor; order directly via Metav Werkzeuge or consult our team for application advice. Thread ring gauge UNF NOGO, 1½" x 12, ANSI B1.1 / 2A — No‑Go ring gauge, Metav IndustryLine The Thread ring gauge UNF NOGO, 1½" x 12, ANSI B1.1 / 2A is a precision No‑Go ring designed for rapid verification of external UNF threads in production and inspection environments Hardened gauge steel construction ANSI B1.1 / B1.2 standard compliant No‑Go ring for quick rejection 1½" UNF 12 tpi, right‑hand thread, 2A tolerance Fast, reliable thread rejection on the shop floor A No‑Go ring serves a single decisive purpose: to confirm that an external thread does not exceed its upper limits. The hardened construction and strict adherence to ANSI B1.1 ensure repeatable behaviour under frequent use, enabling a quick go/no‑go decision at any inspection station. Using a dedicated No‑Go ring reduces measurement time compared with full gauging or thread micrometres, which improves throughput while limiting the risk of shipping out-of-spec components. Built for accuracy and long service life Manufactured from hardened gauge steel, the ring is specified to the 2A external thread tolerance and the UNF form. The 12 tpi pitch is matched precisely to the nominal size 1½" UNF 12 tpi, and the ring is produced to ANSI/ASME B1.1/B1.2 requirements to guarantee compatibility with standard thread forms. The robust material choice and controlled hardening deliver wear resistance and dimensional stability, preserving measurement integrity over long production runs. The part’s compact mass (approx. 0.7 kg) makes it easy to handle and position without excessive fixture requirements. Practical inspection workflow and handling A No‑Go ring is used as part of a straightforward rejection test: when the ring fully enters the thread, the part fails inspection. That simple rule, combined with a clearly marked right‑hand thread, streamlines training and reduces operator uncertainty. For routine quality control, keep the gauge clean, store it in a protective case, and log usage intervals to maintain traceability. Integrating such a ring into regular sampling plans or final checks helps avoid downstream assembly issues and supports efficient corrective action when rejects occur. Contact Metav Werkzeuge for procurement advice or to confirm suitability for specific production or inspection tasks — our specialists in Emmerich will assist with technical details and supply logistics. Technical data Article number (SKU): M315.995.F GTIN: 4054469181202 Brand: Metav IndustryLine Type: No‑Go thread ring gauge Facts Size: 1½" Thread: UNF Thread pitch: 12 tpi Tolerance class: 2A Weight: 0.7 kg Standard: ANSI/ASME B1.1/B1.2 Special features Material: gauge steel, hardened Thread direction: right‑hand Application: external thread inspection Category: Gauges / Thread gauges FAQ How is a No‑Go ring used in a production check? A No‑Go ring gauge is pushed onto the external thread; if the ring fully engages, the part fails. The Thread ring gauge UNF NOGO, 1½" x 12, ANSI B1.1 / 2A is intended specifically for this rejection test on 1½" UNF parts. What does tolerance class 2A indicate for this ring? Tolerance class 2A denotes the external thread tolerance band for standard UNC/UNF threads per ANSI; the gauge is manufactured to match that external class for reliable pass/fail assessment. Is the gauge hardened and suitable for frequent use? Yes — the ring is made from hardened gauge steel, offering wear resistance appropriate for regular shop‑floor inspection. Can this ring be used for left‑hand threads? No — this item is a right‑hand thread No‑Go ring and must not be used for left‑hand thread checks. Does the gauge comply with recognised standards? The ring is produced to ANSI/ASME B1.1/B1.2, ensuring compatibility with standard UNF thread geometry and industry inspection practices. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.1/4" x 12 UNF Thread Ring Gauge GO, Right-Hand, ANSI/ASME B1.1 2A - Metav IndustryLine
Take advantage of the combination of reliable ANSI/ASME conformity, hardened construction and straightforward go/no‑go inspection for faster quality control. Order this gauge directly via Metav Werkzeuge or consult our specialists for application advice. UNF GO Thread Ring Gauge 1 1/4" x 12 (ANSI/ASME B1.1, 2A) — Metav IndustryLine A UNF GO Thread Ring Gauge 1 1/4" x 12 (2A) designed for rapid verification of external UNF threads to ANSI/ASME tolerances in production and inspection environments GO ring gauge for UNF 1¼" x 12 threads Manufactured to ANSI/ASME B1.1/B1.2 standards Material: hardened gauge steel for durability Right-hand thread, tolerance class 2A Fast, standards-based thread verification for production lines The gauge enables immediate go/no‑go assessment of external UNF threads, providing a clear pass/fail decision without interpretation. Built to ANSI/ASME B1.1/B1.2 the tool ensures thread interchangeability across suppliers and assemblies, reducing the risk of mismatched fittings. Used as a frontline inspection tool, the GO ring removes ambiguity from routine checks and supports consistent output in batch production. Durable build that keeps inspection cycles short Constructed from hardened gauge steel, this ring is made for repeated use in workshop environments where wear resistance matters. The robust material and finished thread profile maintain dimensional stability, lowering the need for frequent replacement and keeping downtime to a minimum. The compact mass (approx. 0.7 kg) and right‑hand configuration simplify handling and storage while offering long service life under normal shop conditions. Clear technical fit: UNF threads and 12 tpi explained Designed for UNF 1 1/4" x 12 threads, the gauge checks the external thread against a 12 tpi standard pitch and tolerance class 2A, which is the customary fit for external fasteners requiring controlled clearance. The GO ring confirms whether an external thread falls within the permissible form and dimensions; a successful GO test indicates conformity to the specified limits without measuring every parameter, saving time during routine inspection. Practical integration into quality workflows As a simple and reliable inspection instrument, the GO ring is suited to in‑line sampling, receiving inspection and first‑off checks. Its adherence to recognised standards provides traceable confidence in acceptance decisions and supports documentation practices in quality systems. Supply via Metav IndustryLine benefits from a European quality filter and dependable logistics, helping workshops and small manufacturers maintain steady access to essential gauges. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine GO ring gauge into your inspection procedures and to secure stock for your workshop Technical data Article number: M315.962.F GTIN: 4054469180496 Weight: 0.7 kg Material: Gauge steel, hardened Facts Thread: UNF 1 1/4" x 12 Pitch: 12 tpi Tolerance class: 2A Standard: ANSI/ASME B1.1/B1.2 Special features Right-hand thread Category: Gauges / Thread ring gauge Manufacturer: Metav IndustryLine FAQ What standard does this gauge conform to? The gauge is manufactured to ANSI/ASME B1.1/B1.2, ensuring compatibility with UNF thread form and dimensional requirements for the specified series. Which thread size and pitch are covered by this ring? This GO ring is for UNF 1 1/4" x 12 external threads, checking the standard 12 tpi pitch and external thread form to tolerance class 2A. How does a GO ring gauge indicate acceptance? A successful pass with the GO ring confirms the external thread meets the permitted form and dimensions for the specified limits; the tool gives a direct go/no‑go decision without full dimensional measurement. What material is the ring made from and why is it important? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability to provide consistent inspection results over many cycles. Can this gauge be used for production sampling and receiving inspection? Yes, the GO ring from Metav IndustryLine is intended for shop‑floor sampling, incoming goods checks and routine first‑off inspections where fast, standards‑based decisions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.10mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of ultra-fine tolerance and compact length for reliable in-process checks; the combination of ±0.001 mm accuracy, 1.10 mm diameter and workshop-grade construction supports consistent quality control. Order through Metav Werkzeuge or request application advice from our consultants. Gauge pin M323.110 — 1.10 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.110 gauge pin is a single test pin for high-precision end-measure inspections in workshop and production environments Workshop version for everyday use Diameter 1.10 mm with ±0.001 mm tolerance Length 50 mm for easy access in assemblies Supplied in a protective case Accuracy that secures production tolerances A compact test pin with a 1.10 mm diameter and ±0.001 mm tolerance delivers measurable improvement in pass/fail decisions during incoming inspection and process control. The extremely small permitted deviation reduces measurement uncertainty and supports tighter statistical process control, meaning fewer false rejects and clearer conformity assessments. The high specification is particularly advantageous for fine mechanical assemblies where minute deviations directly affect function and fit. Built for workshop handling and repeatability Constructed from special steel and specified as a workshop version, this single pin combines robustness with dimensional stability. The 50 mm length provides sufficient reach into recesses while remaining simple to handle and store. Supplied in a protective case, the pin is kept secure during transport and storage, which helps maintain surface integrity and accuracy between uses. These attributes reduce downtime and extend service life in everyday inspection routines. Practical integration into inspection routines The M323.110 slot-in format suits bench testers, pin gauges and simple go/no-go setups; traceability is supported by the SKU M323.110 and GTIN 4061905056895 for inventory and quality records. As a single test pin, it is ideal for targeted dimensional checks or as a replacement item in existing sets, enabling quick restoration of inspection capability without requalifying entire gauge stacks. For bespoke inspection concepts or advice on incorporating this pin into automated checks, technical guidance is available. Contact Metav Werkzeuge for tailored advice on integrating the M323.110 gauge pin into inspection procedures or to arrange supply from stock at Metav Werkzeuge Technical data Article number: M323.110 GTIN: 4061905056895 Weight: 0.003 kg Material: Special steel Length: 50 mm Facts Diameter: 1.10 mm Tolerance: ±0.001 mm Measuring range: 1.1 mm Special features Workshop execution Single test pin Supplied in protective case FAQ What level of accuracy does this pin offer? The M323.110 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, suitable for fine end-measure inspections and precise fit checks. Is the pin supplied ready for immediate use in the workshop? Yes, the workshop version is delivered as a single test pin in a protective case; the M323.110 is ready to be used in standard inspection setups. What material is the pin made from and why does that matter? The pin is made of special steel, chosen to provide dimensional stability and resistance to wear in regular workshop use; this helps maintain accuracy over repeated inspections. Can this pin replace a damaged element in a gauge set? The single-item format and standardised diameter make the M323.110 suitable as a direct replacement for compatible pin gauge sets and targeted repairs. How is the product identified for inventory and quality records? Identification is via SKU M323.110 and GTIN 4061905056895, which support traceability and stock management for inspection equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.11mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish, Special Steel, Supplied in Case - Metav IndustryLine
As a compact precision tool for end‑dimension inspection, this gage pin combines ±0.001 mm tolerance with a 1.11 mm diameter and a 50 mm length, delivering repeatable control in workshop metrology; order the part directly via Metav Werkzeuge or consult the Metav advisors for application advice. Gage pin M323.111 — 1.11 mm diameter, ±0.001 mm, 50 mm length The Gage pin M323.111 is a single precision control pin for end‑measurements and plug gauges, designed for workshop use and quick inspection of small bores and features Workshop version for industrial use Diameter 1.11 mm with ±0.001 mm accuracy Length 50 mm for end‑dimension checks Delivered in transport box Consistent accuracy for process control A tolerance of ±0.001 mm establishes this control pin as a rational choice where measurement certainty influences production yield. The narrow diameter of 1.11 mm is manufactured to tight form and size limits, so repeatable fits and go/no‑go checks can be relied upon during routine inspections. The geometry is optimised to minimise deformation under handling; the result is reduced measurement scatter and fewer downstream reworks. Where statistical control of small bores is required, this precision pin provides a verifiable measurement datum that can be used to validate fixtures and gauges. Robust design tailored to workshop workflows Constructed from special steel, the pin combines surface hardness and resistance to wear with the handling properties needed in a production environment. The 50 mm length gives sufficient engagement for many small‑bore checks while remaining easy to position by hand or with simple holders. Supplied as a single unit in a transport box, the product is protected during storage and transit and arrives ready for immediate use in the metrology bench or inspection trolley. The workshop execution balances durability with practical handling to keep inspection cycles efficient. Simple integration into inspection regimes The item suits manual and semi‑automated checking routines and can serve as a reference pin for plug gauge sets or fixture verification. Marked traceability elements make it straightforward to log the SKU and GTIN in quality records and inspection plans. Because the component is a dedicated control pin, it reduces complexity compared with adjustable or multi‑part gauges and supports short cycle time checks without calibration overhead in many shop‑floor scenarios. For procurement or technical matching, contact Metav Werkzeuge for expert guidance and rapid delivery from Emmerich; Metav’s metrology specialists will advise on suitability and complementary gauge hardware. Technical data SKU: M323.111 GTIN: 4061905056901 Label: Gage pin, single, 1.11 mm, ±0.001 mm, length 50 mm Facts Diameter: 1.11 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Material: Special steel Workshop execution Supplied single, in transport box (plastic/wood) Intended for end‑dimension and plug checks FAQ What measurement tolerance does the gage pin offer? The gage pin M323.111 is manufactured to a tolerance of ±0.001 mm, suitable for tight control of small bores and precision end‑measurements. Can the pin be used as a reference in plug gauge sets? Yes, the control pin is intended for plug/checking applications and can serve as a fixed reference within inspection fixtures or gauge sets. Is the pin supplied ready for use and protected for transport? The pin is supplied as a single unit and is delivered in a transport box to protect the surface finish and geometry during storage and shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.12mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of a combination of ultra-fine accuracy and robust workshop construction for consistent inspection and jig alignment. The ±0.001 mm specification and special steel construction make precise end‑measure checks reliable; order the part directly via Metav Werkzeuge or ask our consultants for application advice. M323.112 Gauge pin – 1.12 mm, ±0.001 mm, 50 mm (Metav IndustryLine) M323.112 gauge pin for precision inspection and fixture alignment in workshop metrology Workshop-grade special steel Tolerance ±0.001 mm (1 µm) accuracy Diameter 1.12 mm, length 50 mm Single-piece supply for inspection tasks Engineered for repeatable measurement results The M323.112 is a compact gauge pin engineered to deliver repeatable dimensional checks where micrometre-level control matters. With a declared tolerance of ±0.001 mm (1 µm) the pin supports tight quality control limits commonly required in components with fine bores or precision fitments. The specification means that bore verification or plug‑gauge substitution yields traceable, measurable outcomes rather than subjective assessment, which reduces scrap rates and accelerates inspection throughput. Durability and handling designed for daily workshop use Constructed from special steel and finished for reliable seating, this inspection pin combines wear resistance with straightforward handling. The 50 mm shank offers sufficient engagement for most small-bore checks while remaining short enough to avoid deflection during insertion. The workshop-grade build resists deformation during routine use, so calibration intervals are extended and the tool retains functional accuracy under frequent handling — a practical benefit for production environments and jigs where tools undergo repeated cycles. Clear benefits for quality control and fixture setup For applications such as end‑measure verification, alignment of fixtures and gauging in assembly, the pin provides a compact, measurable datum that integrates with manual and semi-automated processes. The compact 1.12 mm diameter and tight tolerance allow it to serve as a reference in precision assemblies, reducing setup times and improving first‑pass yield. Where measurement consistency is required, the pin’s specification supports objective decision-making in incoming inspection and during final checks. Choose the Metav IndustryLine M323.112 for consistent 1 µm checks — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply from our European quality hub. Technical Data Article number: M323.112 GTIN: 4061905056918 Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.003 kg Facts Diameter: 1.12 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Special features Workshop version Single-piece supply Category: Gauge pin (inspection pin) FAQ What tolerance is specified for this gauge pin? The M323.112 gauge pin is specified with a tolerance of ±0.001 mm (1 µm), suitable for high-precision bore and fit checks. What material is the pin made from? This inspection pin is manufactured from special steel, providing wear resistance appropriate for routine workshop use. For which tasks is this pin intended? The pin is intended for end‑measure verification, fixture alignment and precision bore checks in workshop metrology. How is the item supplied? The article is supplied as a single-piece gauge pin (SKU M323.112) for flexible integration into inspection kits. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.13mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of a highly precise workshop test pin with a ±0.001 mm tolerance and a compact 1.13 mm diameter for reliable end‑measure checks; the hard‑working construction and defined 50 mm length support repeatable inspection routines. Order the gauge pin M323.113 directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.113 – workshop test pin, 1.13 mm, ±0.001 mm tolerance A compact gauge pin designed for fine bore verification and end‑measure checks in workshop environments, combining tight dimensional control with robust everyday handling. High precision ±0.001 mm tolerance Diameter 1.13 mm for fine bore checks 50 mm special-steel length Workshop version for robust daily use Repeatable precision for end‑measure verification The compact test pin delivers ±0.001 mm positional certainty, making it suitable for tasks where small deviations affect assembly fit or functional clearance. This level of tolerance translates to measurable savings: fewer rejected parts, reduced rework and a clearer go/no‑go decision during incoming inspection or final checks. The slim 1.13 mm diameter and calibrated geometry provide a stable reference for bore checks and plug‑gauge substitutes, while the fixed 50 mm length ensures consistent contact depth when used with gauge blocks, templates or simple fixtures. The combination of fine resolution and defined geometry supports reliable statistical process control in small‑part production. Built for workshop use: material and handling benefits Manufactured in special steel, the pin is specified for workshop conditions where handling and routine use demand dimensional stability and wear resistance. The workshop version designation indicates a product balanced between precision and robustness: it withstands daily handling and insertion cycles yet retains the measured form that inspection depends on. The compact mass also simplifies manual manipulation and decreases the risk of impact damage during inspection runs. Where traceable measurement references are needed within production, the pin serves as a pragmatic tool for spot checks, bench testing and assembly verification without requiring elaborate setup. Practical application and installation in inspection routines The single‑piece delivery supports targeted checks or replenishing mixed gauge sets; its modest weight (approx. 0.003 kg) and defined geometry make it easy to position in small bores and hard‑to‑reach cavities. The test pin integrates readily with length stops, mandrels and simple jigs, and its 1.13 mm diameter is suitable for precision fits in instrumentation, micro‑mechanics and connector manufacturing. For repeatable results, use a consistent insertion technique and a clean contact surface; when combined with calibrated reference blocks or micrometric fixtures, the pin becomes part of a cost‑effective quality control chain that emphasises measurable outcomes over complex processes. Choose the Metav IndustryLine gauge pin M323.113 for precise end‑measure tasks and contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich. Technical data Article number: M323.113 GTIN: 4061905056925 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 1.13 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.003 kg Special features Workshop execution Single piece delivery Category: Gauge pin Suitable for fine bore and end‑measure verification FAQ What is the intended use of this test pin? The gauge pin M323.113 is intended for fine bore checks and end‑measure verification in workshop and small‑part inspection tasks. Is the material suitable for repeated inspection cycles? Yes, the test pin is made from special steel and the workshop version is designed for robust daily use while maintaining dimensional stability. Can the pin be integrated with existing jigs and fixtures? Integration is straightforward: the 1.13 mm diameter and 50 mm length fit common mandrels, stops and micro‑fixtures used in precision inspection. What accuracy can be expected during routine checks? Routine inspections using the gauge pin M323.113 benefit from the stated ±0.001 mm tolerance, supporting consistent go/no‑go decisions and reduced rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.14mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of micrometre-level repeatability and a compact, workshop-ready design for dependable in-process checking; the 1.14 mm diameter and ±0.001 mm tolerance ensure reproducible results in small-diameter inspection tasks. Order the single test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.114 single test pin — 1.14 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) M323.114 single test pin serves as a high-precision gauging element for dimensional checks and end-measure references in workshop and production inspection. Workshop-grade precision, ±0.001 mm accuracy Diameter 1.14 mm in ground special steel 50 mm hardened length for reliable seating Supplied as a single gauge pin, ready for use Traceable one-micron accuracy for small-diameter checks The compact pin delivers ±0.001 mm positional certainty, corresponding to a one-micron band of tolerance, which is crucial when assessing fit and clearances in precision assemblies. Such fine accuracy reduces double-check cycles and speeds up go/no-go decisions during quality control processes. The documented tolerance and repeatability help laboratories and production lines to maintain consistent inspection thresholds and to align measurement results with internal quality plans. Robust material and finish for repeatable contact performance Manufactured from special steel with a precision ground shaft, the pin resists wear and preserves form at the contact surface, ensuring consistent seating in gauges, fixtures or bores. The 50 mm length provides sufficient engagement for many small-component checks while remaining easy to handle. The material choice balances hardness and machinability so that maintenance intervals are extended without sacrificing surface integrity at the measuring point. Seamless use in inspection routines and fixturing The single test pin is suitable for insertion into customer fixtures, bench gauges or optical setups as a stable reference element. Its compact diameter makes it ideal for small bores and end-measure applications where conventional pins may not fit. The straightforward geometry supports rapid repeat measurements and reduces operator influence on the result when combined with standardised handling and fixturing practices. Practical benefits for workshop and production environments As a workshop-grade component, the pin simplifies dimensional checks on turned or ground parts, enabling rapid verification during setup and serial production. The concise specification of 1.14 mm diameter and the micrometre tolerance aid procurement and inventory decisions by providing a clear technical reference for purchasing compatible gauging hardware and adapters. For precision gauging requirements, contact Metav Werkzeuge in Emmerich to discuss the M323.114 single test pin and ensure the correct specification and integration into existing inspection workflows. Technical data SKU: M323.114 GTIN: 4061905057236 Manufacturer: Metav IndustryLine Core specifications Diameter: 1.14 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.003 kg Features and materials Material: special steel Supply form: single test pin Version: workshop execution FAQ What is the nominal diameter and how precise is it? The nominal diameter is 1.14 mm and the pin is specified with an accuracy of ±0.001 mm for the M323.114 single test pin supplied by Metav IndustryLine. For which applications is this pin intended? It is intended for small-bore gauging, end-measure tasks and fixture references where micrometre-level repeatability is required in workshop and production environments. Can the pin be used in a fixture or holder? Yes, the compact geometry and 50 mm length make the pin suitable for use in bespoke fixtures, bench gauges and holder systems as a repeatable reference element. What material is the pin made from and why does that matter? The pin is made from special steel, chosen to provide a balance of hardness and wear resistance so the contact surface remains stable over repeated measurements. Is the M323.114 suitable for optical measurement alignment? Yes, its accurate diameter and consistent surface finish make it a practical mechanical reference for optical setups where precise centring and repeatable seating are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.15mm Gauge Pin, ±0.001mm Precision, 50mm Length, Workshop Version in Case - Metav IndustryLine
Combine the ±0.001 mm accuracy with a compact 1.15 mm diameter and 50 mm length to ensure repeatable end‑dimension checks; robust special steel construction and workshop‑grade design support daily inspection routines. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.115 — single test pin, 1.15 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin M323.115 is a workshop‑grade single test pin designed for precise end‑dimension verification and tight‑tolerance inspection in assembly and quality control environments Workshop-grade precision component Diameter 1.15 mm for fine measurements Tolerance ±0.001 mm high accuracy Reliable micrometre‑class accuracy for critical checks The compact inspection pin delivers a certified mechanical tolerance of ±0.001 mm, making it suitable for tasks that require micrometre‑level certainty. Its 1.15 mm diameter is optimised for probing small bores and end faces where repeatability is essential; the pin’s narrow profile enables safe insertion into fine holes without disturbing adjacent features. This level of accuracy reduces rework and shortens inspection cycles, supporting lean quality processes in small‑part production. Durable workshop design that eases handling and storage Manufactured from special steel and finished as a workshop execution, the pin combines a robust feel with a low mass (approx. 0.003 kg) for precise manual positioning. The 50 mm length provides adequate reach for most end‑dimension measurements while remaining easy to handle on the bench. Delivery in a protective transport case ensures secure storage and minimises the risk of damage during handling or transit, preserving the metrological integrity between uses. Seamless integration into verification and assembly workflows As a single inspection pin, the component is ideal for end‑dimension controls, feeler checks and incorporation into fixturebased verification routines. The clear GTIN: 4061905054037 and manufacturer backing from Metav IndustryLine facilitate traceability and procurement for production plants and inspection labs. Use in combination with gauge blocks or master pins supports fast comparative checks and helps standardise acceptance criteria across shifts and sites. Secure measurement certainty with the Metav IndustryLine gauge pin M323.115 — contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich. Technical data Article number: M323.115 GTIN: 4061905054037 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 1,15mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 1.15 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.003 kg Special features Material: special steel Workshop execution Delivered in protective transport case for shipment Single test pin for end‑dimension verification FAQ What is the guaranteed tolerance of this inspection pin? The inspection pin is specified with an accuracy of ±0.001 mm, ensuring micrometre‑class repeatability for critical dimensional checks with the Metav IndustryLine gauge pin M323.115. Which material is the pin made from and why does that matter? The pin is made from special steel, chosen for dimensional stability and robustness in workshop use; this material supports repeated handling without rapid wear while maintaining measurement integrity. Is the gauge pin supplied ready for safe transport and storage? Yes, the M323.115 is supplied in a protective transport case to prevent damage during shipment and storage, preserving its precise dimensions for immediate use. Can this test pin be used for small‑bore inspection and fixture checks? The 1.15 mm diameter and 50 mm length make the pin suitable for probing small bores and integrating into fixture‑based verification routines; consult Metav Werkzeuge for fixture compatibility and handling recommendations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com