Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
30 mm Limit Plug Gauge DIN 2245 H7 Hardened Gauge Steel - Metav IndustryLine
Take advantage of a hardened gauge-steel design combined with DIN‑specified tolerance control to secure fast, repeatable go/no‑go checks on bore diameters. The compact 30.0 mm limit plug gauge supports efficient production inspection and reduces rework. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M314.030 limit plug gauge — 30.0 mm, DIN 2245 H7 (Metav IndustryLine) The M314.030 limit plug gauge is a purpose‑built go/no‑go inspection master for checking internal diameters to DIN 2245, suited to workshop and production‑line quality control. Hardened gauge steel construction Dimensional accuracy to DIN 2245 H7 Compact, hand‑operated inspection gauge Ensure repeatable diameter checks on the shop floor The hardened gauge‑steel construction delivers dimensional stability and wear resistance, helping maintain measurement repeatability over many cycles. As a limit plug gauge to DIN 2245, the component provides a clear go/no‑go indication for internal bores at 30.0 mm, allowing quick decisions during process control. The simple mechanical check requires no power, which reduces setup time and enables immediate integration into in‑line inspection routines, minimising production interruptions while preserving throughput. Built for durability and low maintenance Thanks to hardened gauge steel and precise manufacturing to the H7 tolerance class, the instrument resists deformation and surface wear that can compromise results. This robustness translates into less frequent replacement and lower total cost of ownership for quality teams. The compact form supports one‑hand operation and easy handling at the point of measurement, while the gauge’s finish reduces snagging and facilitates straightforward cleaning between shifts. Practical benefits for quality assurance workflows A mechanical go/no‑go gauge provides an unambiguous pass/fail decision at the machine or assembly station, accelerating inspection throughput and reducing reliance on measurement interpretation. The tool acts as a rapid first‑line control to catch out‑of‑tolerance parts before they proceed to subsequent operations. Maintenance teams gain from the gauge’s predictable behaviour: when used according to routine inspection protocols, it assists in keeping process capability metrics stable and traceable. Conforms to recognised standards for traceability Manufactured to match DIN 2245 requirements, the gauge aligns with common European inspection standards used in machining and toolroom environments. Documentation and marking on the instrument support traceability within calibration and quality management systems, making it suitable for manufacturers that depend on consistent checking methods to uphold product integrity and regulatory compliance. For reliable production inspection, request the Metav IndustryLine M314.030 limit plug gauge through Metav Werkzeuge and benefit from expert guidance and secure delivery from Emmerich Technical data Article number: M314.030 GTIN: 4054469121598 eClass: 21170218 Tariff number: 90173000 Facts Diameter: 30.0 mm Tolerance class: H7 (DIN 2245) Special features Material: hardened gauge steel Standard: DIN 2245 Category: limit plug gauge / gauges FAQ What tolerance class does this gauge check to? The gauge is produced for the H7 tolerance class in accordance with DIN 2245, delivering an unambiguous go/no‑go check for 30.0 mm bores. Is the instrument suitable for continuous use in production? Yes. The hardened gauge‑steel construction of the M314.030 limit plug gauge is designed for repetitive checks on the shop floor and offers resistance to wear under normal inspection cycles. How is the gauge intended to be used in quality workflows? Use the go/no‑go plug to verify whether internal diameters meet the DIN 2245 H7 requirement; it is intended as a fast in‑process control to prevent out‑of‑tolerance parts from advancing. Does the gauge require calibration documentation? The product is manufactured for traceable inspection routines; calibration and documentation options should be discussed with Metav Werkzeuge to match the purchaser’s quality‑management needs. Which materials and applications are typical for this gauge? This limit plug gauge is commonly applied in metalworking and component manufacturing where internal bore checks are required, particularly for parts produced on lathes, boring machines or as part of assembly verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30-45mm Feeler Wedge Set 1.2mm Thickness 0.1mm Graduation Stainless Steel - Metav IndustryLine
Take advantage of the combination of clear 0.1 mm graduation, compact wedge ranges and robust construction for faster, reproducible gap checks in production and maintenance. Order the wedge gauge set directly via (Metav Werkzeuge) or ask our consultants if needed. Wedge gauge set M318.039 — stainless-steel gap measurement set, 0.1 mm graduation Wedge gauge set M318.039 for quick gap and clearance measurement in workshops, inspection bays and assembly lines. Stainless steel construction 0.1 mm graduation for reliable readings 1–15 / 15–30 / 30–45 mm wedge ranges 1.2 mm thickness for low-flex performance Achieve reliable gap readings with measurable efficiency The wedge set is designed to speed up routine clearance checks while keeping results reproducible. The 0.1 mm graduation provides a clear, industry-relevant resolution that reduces interpretation errors compared with coarser gauges; this delivers a measurable improvement in inspection throughput. The compact wedge geometry and measured thickness contribute to a low-flex design, so each insertion gives a stable reading and the measurement becomes less dependent on operator handling. For production control, this means fewer rechecks and a smoother workflow. Robust construction for everyday workshop use Constructed from stainless steel, the set resists corrosion and stays dimensionally stable during normal shop use, which supports longer service life and fewer replacements. The three wedge ranges cover small- to mid-sized clearances commonly encountered during assembly and maintenance, making the set a practical universal solution for bench technicians and quality inspectors. The sturdy build and visible graduation enable quick, repeatable checks on shafts, housings and mating parts without the need for instrument recalibration before every use. Practical benefits for inspection, assembly and maintenance The wedge design is particularly suitable when access is limited or when a tapered feeler is required to find minimum clearance points. The set reduces downtime by allowing immediate size estimation and verification, which is valuable during setup or when diagnosing running faults. Combined with routine measurement protocols, the gauge set supports consistent quality documentation and speeds up decision-making in the workshop. For traceable processes, the compact gauges integrate easily into tool kits and inspection trays. For sample availability and technical advice on the Metav IndustryLine wedge gauge set contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M318.039 GTIN: 4054469181417 ECLASS: 21170342 Facts Measuring range: 30–45 mm (largest wedge) Minimum range segment: 1–15 mm Thickness: 1.2 mm Graduation: 0.1 mm Weight: 0.1 kg Special features Analog wedge gauge set Three wedge ranges: 1–15 / 15–30 / 30–45 mm Visible graduation for easy reading Category: Gauges (Lehren) FAQ How accurate are the readings from this wedge gauge set? The wedge gauge set provides a 0.1 mm graduation; for routine gap checks this level of resolution gives reliable and repeatable indications suitable for workshop inspection and basic quality control. Is the material suitable for workshop environments? The set is supplied in stainless steel, which offers corrosion resistance and long-term dimensional stability under normal workshop conditions. Can the wedge set be used for assembly alignment tasks? Yes, the tapered geometry of the wedges allows quick estimation of minimum clearances and assists with alignment during assembly and maintenance work. What is the product designation and manufacturer? This is the Metav IndustryLine wedge gauge set, SKU M318.039, supplied by Metav IndustryLine and distributed by Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30-piece Surface Comparison Plates Set For Surface Texture Comparison - Metav IndustryLine
Take advantage of a compact, workshop-ready reference for surface quality assessment: the set combines a wide Ra range with process-specific examples to speed up inspection and decision-making. Order the set directly via Metav Werkzeuge or contact our consultants for application advice. Surface comparison plates — 30-piece reference set from Metav IndustryLine, covers Ra references for turning, milling and grinding Surface comparison plates provide a tangible way to compare and classify surface finishes across common machining processes, acting as fast visual and tactile references for production and quality checks. 30-piece set for standardised surface comparison Ra coverage from 500 to 0.05 µm For turning, milling, grinding and lapping checks Compact, workshop-ready reference plates Faster visual control of surface quality for routine production The set functions as a practical reference collection that translates numeric roughness values into visible and tactile examples. By comparing a workpiece directly with the plates, shop-floor staff can make quicker pass/fail decisions without immediate reliance on profilometers. The plates support basic process control and first-line inspections, reducing downtime caused by ambiguous surface assessments and improving throughput in small-batch and series production. Clear mapping between processes and roughness classes The plates cover process-oriented roughness classes, with Ra steps provided for turning, vertical/horizontal milling, plan and round grinding, and lapping. The set lists arithmetic roughness ranges (Ra) and equivalent amplitude values for the typical processes, which helps to interpret machine settings and tool condition. This direct mapping simplifies communication between setup, quality and production teams by linking machining parameters with expected surface outcomes. Practical benefits for workshop and quality departments The compact 30 plates fit into bench kits and inspection trolleys, enabling repeatable checks during setup and run-in phases. They are especially useful for incoming inspection, quick tool comparisons and operator training, where a standardised visual language for surface texture speeds decisions. Because the examples span coarse to very fine finishes, the collection supports a broad scope of parts—from turned housings to finely lapped faces—without excessive handling or instrument changeover. Durable reference, clear identification and easy integration Each plate is lightweight and marked for quick identification; the set is supplied as a complete reference pack for straightforward storage and retrieval. The plates are intended for comparative assessment and process alignment rather than as a substitute for traceable profilometer measurements. For buyers seeking a reliable supplier, Metav IndustryLine provides consistent availability and a broad portfolio of metrology aids that integrate with workshop quality systems. For a dependable workshop reference choose the Metav IndustryLine surface comparison plates and consult Metav Werkzeuge in Emmerich for application support and delivery options Technical Data Article number: M318.036 GTIN: 4054469127798 Manufacturer: Metav IndustryLine Weight: 0.35 kg Set contents: 30 plates Customs tariff number: 90173000 Facts Ra (turning, milling): 500 / 250 / 125 / 63 / 32 / 16 µm Ra (plan grinding): 63 / 32 / 16 / 8 / 4 / 2 µm Ra (round grinding): 63 / 32 / 16 / 8 µm Ra (lapping): 4 / 2 µm Ra (metric examples): 12.5 / 6.3 / 3.2 / 1.6 / 0.8 / 0.4 µm and finer ranges as listed Special features Designed for comparative visual and tactile surface assessment Suited to turning, vertical/horizontal milling, plan and round grinding, lapping Compact, workshop-ready set for bench or trolley use Serves as a communication tool between setup and quality teams FAQ What range of roughness do the plates cover? The Surface comparison plates from Metav IndustryLine cover a broad Ra range, from coarse values used in heavy machining down to fine finishes suitable for lapping, with the detailed Ra steps listed in the technical data. Can the plates replace a profilometer for certification? The Metav IndustryLine comparison plates are intended as visual and tactile references for routine checks; they do not replace traceable profilometer measurements when formal certification is required. Which machining processes are represented by the set? The set includes examples relevant to turning, vertical and horizontal milling, plan grinding, round grinding and plan lapping, enabling direct comparison across these common processes. How many plates are included and how are they supplied? The product is supplied as a complete set of 30 reference plates, designed for easy identification and workshop use. Is this product suitable for operator training? Yes, the plates are well suited to operator training and first-line inspection tasks, helping to establish a shared visual standard for surface quality across a team. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Precision Feeler Gauge Set 20-Piece 0.1–2.0 mm Conical Ends On Ring, Factory Standard - Metav IndustryLine
High-precision, tapered blades and a compact ring-mounted design deliver fast, reliable gap checks for set-up and inspection tasks; the ±0.012 mm accuracy supports consistent measurement results. Order the set directly via Metav Werkzeuge or contact our consultants for specification advice and application support. Precision feeler gauges on ring, 300 mm — tapered blades, 0.10–2.00 mm (Metav IndustryLine) Precision feeler gauges on ring, 300 mm are designed for precise gap and clearance checks in workshop, toolroom and quality-inspection environments, facilitating access to narrow joints and ensuring repeatable set-up. Tapered blade tips for tight gaps Metric gauge range 0.10–2.00 mm Ring-mounted set for organised storage Accuracy approximately ±0.012 mm Accurate measurement for efficient setup and inspection The set combines a fine measurement range of 0.10–2.00 mm with a factory-controlled production standard to provide consistent results during machine set-up and maintenance. The blades feature a tapered form that eases insertion into narrow clearances and variable-width joints, reducing alignment rework. With an uncertainty around ±0.012 mm, this solution supports routine inspection and adjustment tasks where reproducible readings are essential; the limited range concentrates precision where it is most commonly required in small-assembly and toolmaking operations. Practical design that keeps workshops productive The ring-mounted arrangement offers compact, immediate access to the most commonly needed thicknesses while keeping blades secured and organised. The 300 mm format provides a stable handling length for reach and control without excess bulk, helping operators carry out repeated checks more quickly. The conical blade geometry improves tactile feedback when sliding between faces, which helps to avoid over-stressing delicate components. These characteristics together cut the time needed for iterative adjustments and increase throughput on set-up and inspection workflows. Traceability and workshop integration for quality assurance Manufactured to a clear factory standard, the set is suitable for integration into routine quality procedures and maintenance schedules. The assortment of fine increments supports precise shimming and clearance setting in applications from valve adjustment to jig and fixture alignment. When specification clarification is required, Metav IndustryLine product documentation and technical advisors are available to assist with compatibility and selection for specific processes, helping to align the tool set with existing measurement routines and quality protocols. For workshop-ready precision, request the Metav IndustryLine precision feeler gauge set via Metav Werkzeuge – our Emmerich team will advise on suitability for specific applications and help specify the right set-up for production needs. Technical Data SKU: M318.023.3 GTIN: 4054469164977 Manufacturer: Metav IndustryLine Category: Gauges; Measuring pins Facts Length: 300 mm Measurement range: 0.10–2.00 mm Accuracy: 0.012 mm Blade width: 12.7 mm Items per set: 20 Tariff number: 90173000 Special features Tapered (conical) blade tips Ring-mounted set for organised storage Factory standard production Thicknesses included: 0.10, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.30, 1.40, 1.50, 1.60, 1.70, 1.80, 1.90, 2.00 FAQ How precise are the gauges for routine inspection use? The set is produced under a factory standard and delivers an accuracy in the order of ±0.012 mm, suitable for consistent routine inspections and set-up tasks. What range of gaps can be measured with this set? The blades cover a 0.10–2.00 mm range in fine increments, enabling precise checks and shimming for small to medium clearances. Are the blades suitable for accessing narrow or angled joints? Yes, the tapered blade tips allow access to tight and angled gaps, improving insertion and tactile feedback during measurement. Is this set appropriate for workshop and toolroom environments? Designed for workshop use, the ring-mounted organisation and 300 mm handling length make the set practical for repeated adjustments and toolroom applications. Does the set come with manufacturer identification for traceability? The Metav IndustryLine set is identifiable by its SKU and GTIN and is produced to a factory standard, which supports traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Precision Ring Gauge Feeler Set Tapered Form 0.05–0.5 mm 8-Piece, Factory Standard - Metav IndustryLine
Take advantage of the combination of high repeatability, a broad thickness range and a practical retaining ring for organised storage; the tapered blades provide reliable gap setting across workshop and inspection tasks. Order the precision feeler gauge set directly via Metav Werkzeuge or ask our consultants if needed. Precision feeler gauge set on ring – tapered blades, 0.05–0.50 mm, 300 mm Precision feeler gauge set on ring for measuring and setting narrow gaps and clearances in mechanical assemblies and maintenance work Tapered blades for fine gap adjustment Thickness range 0.05–0.50 mm in eight steps 300 mm blade length for extended reach Set supplied on a robust retaining ring Consistent metrology for routine and critical tasks The set delivers repeatable thickness values across eight calibrated steps from 0.05–0.50 mm, supporting tasks that require fine adjustment rather than coarse approximation. Each blade is manufactured to a defined tolerance, producing a practical accuracy of ±0.012 mm, which is suitable for workshop inspections and service jobs where reliable gap settings are essential. The stepped thicknesses—0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40 and 0.50 mm—allow selection of the closest fit without iterative filing, reducing set‑up time and minimising process variation. Workshop-ready design that improves handling and access A 300 mm blade length gives this gauge set reach into deeper assemblies and reduces the need for temporary shims or improvised tools. The tapered (conical) blade profile eases insertion into narrow clearances and supports incremental fitting when aligning components. Housed on a sturdy retaining ring, the blades remain organised and immediately accessible; the complete set weighs approximately 0.07 kg, which keeps it portable for bench work or service rounds. Supplied to factory standard (Werksnorm), the set balances robustness with the practical handling demands of daily use. Practical applications and reliability in production environments This precision set is appropriate for setting valve clearances, checking bearing end‑float, aligning toolholders and fine adjustment work in jigs and fixtures. The extended blade length and tapered geometry make it particularly useful where access is restricted but measurement confidence is required. Delivered as a complete 8‑piece set, it integrates into quality control routines and maintenance kits, supporting faster fault diagnosis and more consistent assembly results. For specification queries or application matching, Metav Werkzeuge offers technical advice to align the gauge choice with process requirements. Choose the Metav IndustryLine tapered feeler gauge set for reliable gap control and contact Metav Werkzeuge for purchase guidance and application support. Technical data Article number: M318.022.3 GTIN: 4054469164649 Tariff number: 90173000 Set: 8 pieces Numbers / Core technical data Length: 300 mm Blade width: 12.7 mm Thicknesses: 0.05 / 0.10 / 0.15 / 0.20 / 0.25 / 0.30 / 0.40 / 0.50 mm Accuracy: ±0.012 mm Weight: 0.07 kg Designs / Special features Tapered (conical) blade profile Supplied on a robust retaining ring Factory standard: Werksnorm Precision feeler gauge set, 8‑piece FAQ What thicknesses are included in the set? The set contains blades of 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40 and 0.50 mm for incremental gap measurement. Is this set supplied as a complete kit? Yes, the precision feeler gauge set is delivered as an eight‑piece set on a retaining ring (SKU M318.022.3). What level of accuracy can be expected? Manufactured to factory standard, the blades provide an indicative accuracy of ±0.012 mm for reproducible gap settings. Where is this gauge set best applied? Ideal for valve clearance checks, bearing adjustments, alignment of tooling and other fine‑adjustment tasks in workshops and maintenance environments. Are the blades tapered for tight access? Yes, the conical blade profile facilitates insertion into narrow or recessed gaps and supports progressive adjustment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Setting Ring, Hardened Gauge Steel, Form C, DIN 2250/DIN 286 JS4 - Metav IndustryLine
Benefit from the combination of hardened, lapped gauge steel, tight JS4 tolerance and a robust Form C profile for consistent internal diameter control. Order the ring directly via Metav Werkzeuge or consult the team for specification advice and delivery options. Setting ring 300 mm — hardened gauge steel (Metav IndustryLine) The Setting ring 300 mm — hardened gauge steel is a precision ring gauge designed for internal diameter verification and master‑gauge applications in metrology laboratories and workshop inspection. Hardened, lapped gauge steel surface Certified to DIN 2250 / DIN 286 Form C profile for internal checks Robust 20.8 kg construction Reduce rejects with traceable dimensional control The hardened and lapped surface guarantees stable contact conditions and minimal surface deformation, which directly improves repeatability in comparative measurements. Conformity with DIN 2250 and DIN 286 in JS4 tolerance provides a clear reference level for inspection processes and calibration chains. Using a purpose‑made ring gauge minimises subjective variation from hand tools, so production control becomes more reliable and measurable. Built for repeatable, heavy‑duty inspection tasks A substantial mass and the choice of gauge steel ensure thermal and mechanical stability during routine use; the weight contributes to consistent seating in fixtures and prevents light displacement when performing comparative checks. The Form C profile is tailored for internal diameter verification, offering a clear seating surface for cutters, mandrels and internal micrometers. This construction lowers the need for frequent rechecks and extends intervals between maintenance cycles. Easy integration into quality workflows The ring is suitable as a master reference for incoming inspection, process control and tool setting. Marked identification and the included article data support inventory and traceability within laboratory information systems; the unit functions well alongside calipers, internal micrometers and comparator setups. For procurement and repeat ordering the clear SKU and GTIN simplify stocking and document control in regulated environments. For procurement and technical clarification on this Metav IndustryLine setting ring, contact Metav Werkzeuge to confirm suitability for specific measurement routines and to arrange supply details. Technical data Article number: M313.300 GTIN: 4054469167183 ECLASS: 21170104 Tariff code: 90173000 Facts Diameter: 300 mm Weight: 20.8 kg Special features Material: hardened and lapped gauge steel Standards: DIN 2250; DIN 286; JS4 tolerance Form: C profile Category: setting ring / ring gauge Application: internal diameter verification, master gauge FAQ What is the main use of this setting ring? The setting ring is intended for internal diameter verification and serves as a master gauge in comparative and inspection tasks; the Metav IndustryLine ring (SKU M313.300) is suited to workshop and metrology lab routines. Which standards and tolerances does the ring meet? The ring complies with DIN 2250 and DIN 286 and is manufactured to JS4 tolerance, making it appropriate where standardised dimensional references are required. Is the material suitable for long‑term workshop use? Yes; the hardened and lapped gauge steel provides wear resistance and stable seating, supporting repeated comparative checks over prolonged use. Can this ring be used with internal micrometers or mandrels? The Form C profile and precision finish make the ring compatible with internal micrometers, mandrels and comparator systems for routine calibration and control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Ceramic End Gauge DIN 861, Hardness HV1250, Stainless Antimagnetic - Metav IndustryLine
Benefit from the combination of zirconia ceramic construction, DIN EN ISO 3650 accuracy and an exceptionally high HV 1250 hardness for a reliable, wear‑resistant length standard; order via Metav Werkzeuge or consult our specialists for application advice. Ceramic end measure 300 mm DIN 861 — Zirconia end measure, 300 mm (Metav IndustryLine) The Ceramic end measure 300 mm DIN 861 is a high‑hardness, anti‑magnetic length standard designed for workshop and laboratory reference measurements in metalworking and quality control. Zirconia ceramic, wear‑resistant Accuracy to DIN EN ISO 3650 Hardness HV 1250, twice steel Cross‑section 35 x 9 mm Reproducible length standard for workshop and lab The zirconia construction delivers exceptional wear resistance and dimensional stability, which makes this gauge ideal where repeatable results are essential. With a 300 mm nominal length and a compact 35 x 9 mm cross‑section, the instrument combines reach with a slim profile that is easy to position. The material hardness of HV 1250—around twice that of typical hardened steels—reduces surface damage during handling and prolongs the service life of the reference. Traceable accuracy aligned with recognised standards Calibrated measurement standards must be unambiguous. This end measure complies with DIN EN ISO 3650, providing a clear basis for traceability and documentation in incoming inspection and routine checks. The standardised accuracy reduces decision latency in production control and supports consistent pass/fail outcomes, which in turn helps maintain process stability and reduces rework rates across production batches. Practical benefits for quality workflows Anti‑magnetic properties and corrosion resistance mean the gauge performs reliably in workshop environments where ferrous debris and humidity could otherwise compromise results. As a length standard, it serves well for master checks, gauge block comparisons and fixture verification. The robust material and slim cross‑section simplify handling and mounting in confined spaces, while its wear properties lower lifetime maintenance needs, supporting cost‑efficient quality routines. For an application review or to ensure the Metav IndustryLine ceramic end measure suits your inspection plan, contact Metav Werkzeuge in Emmerich for detailed technical guidance and purchasing support. Technical Data Article number: M324.300 Designation: Ceramic end measure 300 mm DIN 861 Manufacturer: Metav IndustryLine Facts Nominal size: 300 mm Cross‑section: 35 x 9 mm Hardness: HV 1250 Special features Material: zirconia ceramic Compliance: DIN EN ISO 3650 Properties: stainless, antimagnetic, wear‑resistant FAQ What level of accuracy does this end measure provide? The ceramic end measure meets the requirements of DIN EN ISO 3650, offering the traceable accuracy expected for a 300 mm reference standard. Is the material suitable for heavy workshop use? Yes. The zirconia ceramic construction of the Metav IndustryLine 300 mm end measure combines high hardness (HV 1250) with wear resistance and anti‑magnetic behaviour, making it robust for regular workshop checks. Can this gauge be used for comparator checks against gauge blocks? It is suitable for master and comparator work; the dimensional stability and compliance with DIN EN ISO 3650 make it appropriate for establishing reference lengths and verifying small assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Gauge Ball Pair Hardened Chrome Steel 0.003mm Accuracy, 0.00008mm Diameter Tolerance - Metav IndustryLine
The matched pair of precision spheres combines repeatable accuracy, robust construction and compact handling to simplify reference measurements and calibration tasks in production and metrology environments. Benefit from the 0.003 mm nominal accuracy and hardened chrome steel construction for long service life; order the pair directly via Metav Werkzeuge or consult our specialists for application advice. Pair of gauge balls M318.456 — 30 mm diameter, 0.003 mm accuracy (Metav IndustryLine) Pair of gauge balls M318.456 are precision reference spheres intended for calibration, comparative checks and dimensional set‑ups in metrology and workshop environments. Hardened chrome steel construction Precision 0.003 mm accuracy Matched pair for reference measurements Compact 30 mm diameter spheres Reliable reference for dimensional control The matched spheres serve as a compact, traceable reference for comparative and contact measurements where spherical standards are required. With a specified accuracy of 0.003 mm and a diameter of 30 mm, the set provides a stable basis for verifying probe performance, checking gauge positions and establishing repeatable datum points. The stated tolerance on diameter of 0.00008 mm underlines the manufacturing precision; this tight geometrical conformity reduces measurement uncertainty and simplifies the calculation of correction values in routine quality checks. Durable construction that supports reproducible results Manufactured from hardened chrome steel, the spheres combine surface hardness (>HRC 62) with an ultra‑fine finish. The very low surface roughness of 0.00001 ensures minimal contact distortion and reduces wear on both the standard and the contacting stylus, which preserves dimensional stability over time. The matched production process results in a pair of spheres whose mutual deviations are controlled, offering reliable comparative measurements and long‑term reproducibility in shop floor and laboratory use. Practical application and workshop advantages Small, robust and supplied as a set of two, these precision spheres suit tasks such as probe calibration, setting up V‑block references, comparative checks on coordinate measuring machines and use as spherical end standards for tactile inspection. The compact 30 mm format keeps handling straightforward while providing a large enough surface for repeatable probing. Metav IndustryLine’s local presence in Emmerich combines broad stock availability with a quality filter for the European market, supporting a consistent supply chain for calibration standards and workshop essentials. For dependable reference spheres from Metav IndustryLine, request the matched gauge‑ball set through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and delivery options. Technical data Article number: M318.456 SKU: M318.456 Category: Lehren / Gauges Facts Diameter: 30 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness: 0.00001 Hardness: >HRC 62 Weight: 1.3 kg Pieces per set: 2 Special features Material: hardened chrome steel Matched pair for comparative measurements Compact, workshop‑friendly size Suitable for probe calibration and reference checks FAQ What material are the spheres made from? The pair of gauge balls are manufactured from hardened chrome steel as indicated in the technical data, providing wear resistance and stable geometry. Are these spheres supplied as a set and how many pieces are included? Yes — the product is supplied as a matched set consisting of two pieces (set of two) for comparative and reference use. What level of accuracy and tolerance can be expected from these reference spheres? The reference spheres are specified with an accuracy of 0.003 mm and a diameter tolerance of 0.00008 mm, suitable for routine metrology and calibration tasks. Can the spheres be used for probe calibration on a CMM? The matched pair and fine surface finish make these spheres suitable as tactile reference standards for probe verification and related CMM checks. Who supplies and is responsible for this product? Metav IndustryLine supplies the gauge balls; Metav Werkzeuge manages availability and distribution in Europe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Setting Ring Form C Hardened Gage Steel DIN 2250, JS3 - Metav IndustryLine
Benefit from the combination of hardened, lapped gauge steel, conformity to DIN 2250 / DIN 286 (JS 3) and the compact 30 mm nominal diameter for reliable gauge setting and repeatable measurements. Order the setting ring directly via Metav Werkzeuge or contact our consultants for application advice. Setting ring 30 mm (Form C) — hardened gauge steel, DIN 2250 The Setting ring 30 mm is a precision setting gauge for dimensional verification and the calibration of internal measuring devices in workshops and metrology labs. Hardened and lapped gauge steel Conforms to DIN 2250 / DIN 286, JS 3 Precision 30 mm nominal diameter Robust Form C geometry for workshop use Stable compliance with recognised standards for fewer rejects The ring is manufactured to DIN 2250 and DIN 286 requirements and to tolerance class JS 3, providing a measurable baseline that reduces setup uncertainty. With a nominal diameter of 30 mm, the gauge offers a standard reference that supports reproducible setting procedures and quick go/no-go checks. This normative compliance means inspection results are comparable across shifts and suppliers, lowering the risk of costly rework and increasing production uptime. Durable construction that keeps calibration longer Made from hardened, lapped gauge steel, the component resists wear from routine use and maintains its form under repetitive contact. The lapped finish ensures smooth seating and true contact with mating parts, which benefits both short-term accuracy and long-term stability. For maintenance planning, the robust design reduces the frequency of requalification, so inspection resources are used more efficiently while preserving measurement confidence. Practical geometry for everyday metrology tasks The Form C configuration provides a compact, easy-to-handle profile suited to bench work and machine-side checks. Its form factor simplifies positioning in confined setups and supports rapid verification of internal diameters or the calibration of internal setting devices. Because the gauge is a purpose-built setting ring, it integrates seamlessly into standard inspection workflows and helps to accelerate first-article inspections and in-process checks. Integration into quality systems and workshop routines As a precision gauge, the component supports traceable measurement processes and fits into established calibration cycles. Use of this setting ring in quality control routines improves the reproducibility of instrument adjustment and aids documentation for audits. The straightforward construction and adherence to established standards make it an efficient choice for repair shops, production metrology and toolroom setups that demand consistent dimensional references. Contact Metav Werkzeuge today to discuss ordering the Metav IndustryLine setting ring or to request application guidance: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: M313.030 GTIN: 4054469120683 ECLASS: 21170104 Manufacturer: Metav IndustryLine Facts Nominal diameter: 30 mm Customs tariff number: 90173000 Standards: DIN 2250; DIN 286; JS 3 Special features Material: gauge steel, hardened and lapped Form: Form C Category: Gauges / Setting rings Application: Dimensional verification and gauge setting FAQ What is the intended use of the setting ring? The setting ring is intended for dimensional verification and the calibration of internal measuring devices; the Metav IndustryLine setting ring M313.030 serves as a traceable reference for workshop and metrology checks. Which standards and tolerance class apply to this ring? The ring complies with DIN 2250 and DIN 286 and is manufactured to tolerance class JS 3, ensuring reproducible results for setup and inspection tasks. What material is the gauge made from and why does it matter? The gauge is made from hardened, lapped gauge steel, which provides wear resistance and stable contact surfaces for reliable measurement over time. How does the Form C geometry affect handling? Form C gives a compact profile that is easy to position in confined spaces and practical for machine-side checks, improving handling during routine inspections. Can the setting ring be used in production and laboratory environments? Yes, the Metav IndustryLine setting ring M313.030 is suitable for both workshop production control and metrology lab reference use thanks to its normative conformity and robust construction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30–45mm Gap Gauge Wedge 1.2mm Thickness, 0.1mm Graduation Stainless Steel - Metav IndustryLine
Take advantage of a compact, reliable solution for gap measurement: the combination of a stainless steel blade, a 1–45 mm measurement range and a fine 0.1 mm graduation ensures consistent presetting and quick inspection in everyday workshop tasks. Order the M318.042 wedge gauge directly via Metav Werkzeuge or ask our consultants if needed. M318.042 Wedge Gauge (30–45 mm) — Stainless Steel, 0.1 mm Graduation (Metav IndustryLine) The M318.042 wedge gauge is a stainless steel measuring wedge developed for fast and dependable gap measurement and presetting tasks in metalworking, toolmaking and inspection. Stainless steel construction Measurement range 1–45 mm 0.1 mm graduation accuracy 1.2 mm thickness blade Accurate, repeatable gap measurement for efficient workflows The compact wedge gauge is designed to translate a simple measurement routine into reproducible results: with a measurement range of 1–45 mm and a readable 0.1 mm graduation, the tool supports quick checks and presetting operations that reduce set-up times and machine idle periods. The analogue scale and the slim blade geometry permit controlled insertion into narrow gaps, turning subjective feel into objective, comparable data — a straightforward way to improve throughput without introducing complex electronics. Durable construction that withstands daily workshop use Made from a corrosion-resistant material as stated in the product label, the measuring wedge resists wear from repeated contact and sliding. The 1.2 mm thick blade balances flexibility and stiffness so that bending during use is minimised while maintaining access to confined spaces. The durable build reduces replacement frequency and supports continuous operation in production and maintenance environments, ensuring a low total cost of ownership and steady performance over time. Simple handling and clear results for quality assurance Operation is intentionally direct: the analogue blade and marked graduation enable fast visual checks and uncomplicated documentation during routine inspections. The slim profile facilitates measurements for both assembly and inspection tasks where rapid verification is more valuable than absolute micrometre-level resolution. Where traceable, high-frequency checks are required, this gauge provides a reliable baseline for go/no-go decisions and complements more sophisticated measuring equipment in a quality-control workflow. Choose the Metav IndustryLine M318.042 wedge gauge for robust, workshop-ready gap measurement — contact Metav Werkzeuge in Emmerich for procurement advice or to discuss suitable measuring strategies for specific applications Technical Data Article number: M318.042 GTIN: 4054469181424 Manufacturer: Metav IndustryLine Facts Measurement range: 1–45 mm Minimum range: 1 mm Maximum range: 45 mm Blade thickness: 1.2 mm Reading/graduation: 0.1 mm Weight: 0.1 kg Special features Stainless steel as stated in product label Analogue operation Intended for gap measurement and presetting Category: Gauges (Lehren) FAQ What measurement range does the wedge gauge cover? The M318.042 wedge gauge covers a range from 1 mm to 45 mm, suitable for small to medium gap checks and presetting tasks. How fine is the graduation on this gauge? The wedge is marked with a 0.1 mm graduation, enabling clear analogue readings for routine inspection and setting operations. Is the blade corrosion-resistant? The product label specifies stainless steel construction, giving the blade good resistance to corrosion and regular workshop wear. Can this gauge be used for precision laboratory measurements? The wedge gauge is designed for dependable workshop and shopfloor use; it provides reproducible checks and presetting accuracy but is not a substitute for metrology-grade instruments when micrometre-level traceability is required. What makes this gauge suitable for everyday workshop use? The compact form, slim 1.2 mm blade and simple analogue scale make the tool easy to insert into narrow gaps and quick to read, supporting efficient presetting and inspection tasks in production and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31 mm Limit Go/No-Go Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
For precise pass/fail inspection of 31.00 mm bores, rely on the hardened gauge-steel construction and DIN 2245 H7 tolerance to keep production flow smooth; order the limit plug gauge directly via Metav Werkzeuge or consult our technical advisors for application guidance. Limit plug gauge M314.031 — 31.00 mm H7, DIN 2245 (Metav IndustryLine) The Limit plug gauge M314.031 is a hardened gauge-steel go/no-go plug designed for quick verification of metric bores to DIN 2245 with an H7 tolerance, suitable for production and incoming inspection tasks. 31.00 mm nominal diameter H7 Conforms to DIN 2245 tolerance standard Hardened gauge-steel for repeatable checks Reliable in-line inspection that reduces rejects The limit plug functions as a fast, unequivocal gauge for go/no-go assessment, enabling timely decisions on part acceptance. With a 31.00 mm nominal diameter and H7 tolerance, the tool supports standardised quality checks and helps to reduce downstream rework by catching out-of-tolerance bores at the first control stage. This contributes directly to improved throughput and lower scrap rates. Robust construction for consistent measurements Manufactured from hardened gauge steel, the gauge offers mechanical stability and wear resistance that preserve the calibrated fit over repeated cycles. The go/no-go design eliminates subjective judgement in pass/fail calls, which is particularly valuable on assembly lines and in high-volume inspection where consistency is essential for process reliability. Standards compliance and traceable specification Conformance to DIN 2245 ensures the gauge matches established geometry and tolerance conventions for plug gauges, making it compatible with typical metrology procedures and quality documentation. The clear designation of H7 tolerance provides a verifiable basis for conformity assessment and helps integrate the check into existing inspection plans or control charts. Practical use and handling benefits The compact limit plug simplifies handling during routine checks and can be used at the bench or inline without special fixtures. Its straightforward go/no-go indication speeds up sampling routines and supports lean-quality workflows, providing operators with quick, objective results that promote confidence in outgoing parts and reduce inspection time per component. Contact Metav Werkzeuge for specification advice and ordering of the Metav IndustryLine limit plug gauge M314.031 to ensure the correct gauge configuration for production needs Technical Data Article number: M314.031 GTIN: 4054469146775 Standard: DIN 2245 Material: gauge steel, hardened Core dimensions Nominal diameter: 31.0 mm Tolerance: H7 Tariff number: 90173000 ECLASS: 21170218 Special features Limit plug gauge (go/no-go function) Categories: Messstifte; Lehren Manufacturer: Metav IndustryLine FAQ What is the primary use of this plug gauge? The limit plug gauge M314.031 is used for rapid go/no-go inspection of bores with a nominal size of 31.00 mm to verify conformity with DIN 2245 and H7 tolerance. Which standard and tolerance does it check? This gauge is manufactured to DIN 2245 and configured to the H7 tolerance class for metric bores. What material is the gauge made from and why does it matter? The tool is made from hardened gauge steel, which ensures wear resistance and dimensional stability for repeatable checks over time. Is the gauge suitable for production-line sampling? Yes, the go/no-go characteristic of this limit plug gauge makes it well suited for quick production sampling and in-line inspection routines. Can the gauge be used with other nominal sizes? The device is specific to a 31.00 mm nominal bore; for other sizes, corresponding limit plug gauges should be selected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 mm Limit Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
Reliable control of bore tolerances is achieved through a hardened gauge steel body and compliance with DIN 2245 in an H7 fit; these characteristics ensure reproducible go/no-go checks and long service life. Purchase or request specification advice directly via Metav Werkzeuge for safe integration into production and inspection routines. Limit plug gauge M314.032 — Ø 32.0 mm, DIN 2245 H7 (Metav IndustryLine) A limit plug gauge designed for fast go/no-go inspection of bores to DIN 2245, intended for shop‑floor and inspection‑bench use. DIN 2245 H7 tolerance guaranteed Hardened gauge steel construction Designed for fast go/no-go inspection Precision that keeps production moving The M314.032 limit plug gauge is manufactured to the DIN 2245 specification and machined for an H7 fit, delivering a clear pass/fail decision during routine checks. The go/no-go principle reduces interpretation error: a compliant gauge provides immediate confirmation of bore conformity without additional measurement steps, which speeds up process control and reduces throughput delays. Where repeatability and a defined inspection routine are essential, this solid‑body gauge offers a pragmatic solution that integrates easily into production inspection plans. Built for repeated use in industrial environments Constructed from hardened gauge steel, the unit resists wear and maintains dimensional stability after many cycles of insertion and removal. The material choice minimises surface deformation and preserves the gauge form, ensuring consistent contact geometry over time. For quality departments that perform frequent checks, the robust construction lowers replacement frequency and contributes to steady inspection results, supporting an efficient maintenance budget and predictable tool lifecycle. Practical integration into inspection workflows Marking and identification are clear for traceability in goods‑in and inspection logs; the gauge’s Ø 32.0 mm designation aligns with standard bore registers and fits directly into established test procedures. The simple pass/fail outcome complements statistical process control (SPC) sampling and reduces operator training time compared with continuous measuring instruments. For shops standardising inspection kits, the compact form factor of this limit gauge supports easy storage and swift retrieval during batch checks. For reliable DIN‑compliant gauges select the Metav IndustryLine range via Metav Werkzeuge — contact Metav Werkzeuge for tailored specification advice and assistance with integrating the gauge into existing inspection procedures Technical data Article number: M314.032 GTIN: 4054469121604 Norm: DIN 2245 Material: gauge steel, hardened Core specifications Diameter: 32 mm eClass: 21170218 Customs tariff number: 90173000 Special features Tolerance class: H7 Category: measuring pins; gauges Label description: limit plug gauge, 32.0 mm, DIN 2245/H7 FAQ What tolerance and standard does the gauge check? The M314.032 limit plug gauge checks bores to DIN 2245 with an H7 tolerance, providing a clear go/no‑go result. Is the gauge suitable for frequent production checks? Yes, the gauge’s hardened gauge steel construction is intended for repeated shop‑floor use and sustained dimensional stability in routine inspections. Can this gauge be used in automatic test fixtures? The M314.032 limit plug gauge is suitable for manual and fixture‑based checks where a fixed go/no‑go element is required; integration depends on fixture design and locating methods. Is a calibration certificate supplied with the gauge? A calibration certificate is not specified in the product data for this limit plug gauge; additional documentation can be requested from Metav Werkzeuge if required for quality records. What applications are typical for this type of gauge? Common uses include incoming inspection of machined bores, in‑process checks on production lines, and final inspection of assemblies where a 32 mm H7 fit is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Benefit from a hardened, lapped gauge-steel reference that meets DIN 2250 and DIN 286 JS 3 tolerances for consistent set-up and inspection. The compact 32 mm diameter and Form C profile deliver repeatable seating and interchangeability in gauge routines — order the setting ring directly via Metav Werkzeuge or ask our consultants if needed. Setting ring 32 mm — hardened, lapped gauge ring (DIN 2250) | Metav IndustryLine A Setting ring 32 mm intended as a stable reference for micrometer calibration, bench inspection and tool-setting in metrology and workshop environments Hardened, lapped gauge steel Conforms to DIN 2250 and DIN 286 JS 3 Form C profile for standard seating Suitable as a calibration reference Stable reference with industrial conformity The ring is manufactured from hardened and lapped gauge steel, providing a wear‑resistant contact surface that preserves dimensional integrity over many measurement cycles. Compliance with DIN 2250 ensures that the ring serves as a recognised reference for internal calibration tasks; traceability within an inspection routine is supported by adherence to the standard, which simplifies documentation in quality processes. The result is predictable performance and fewer rechecks during process control. Predictable seating and interchangeability in inspection routines The Form C profile and JS 3 tolerance class define the seating geometry and permissible deviation, which in practice means repeatable positioning in fixtures and comparators. For workshops and quality departments this translates to faster set‑ups and consistent readings when the ring is used as a master or reference gauge. The standardised form reduces variation between mating parts and helps maintain a stable production flow. Low maintenance for long-term repeatability The lapped finish minimises surface irregularities and reduces abrasive wear during contact with measuring anvils or setting plugs. Because the surface is processed to minimise friction and micro‑asperities, the component requires only routine cleaning and correct storage to maintain accuracy. This durability lowers downtime and supports predictable service intervals in calibration schedules. Practical uses across metrology and workshop tasks The ring is suitable for micrometer setting, size verification of plug gauges and as a bench standard for comparative checks in both manufacturing and inspection labs. Its compact 32 mm diameter and standard profile make it straightforward to integrate into existing gauge sets and test rigs. When used as a setting reference, the part supports both rapid set‑up and precise follow‑up checks, helping to keep quality assurance efficient and measurable. For precision gauge standards from Metav IndustryLine contact Metav Werkzeuge in Emmerich for personalised advice and reliable supply: info@metav-werkzeuge.com │ +49 2822 7131930 Technical Data Article number: M313.032 GTIN: 4054469120690 EClass: 21170104 Facts Diameter: 32 mm Material: Gauge steel, hardened and lapped Tariff number: 90173000 Special features Form C profile Standards: DIN 2250; DIN 286, JS 3 Suitable as a calibration reference FAQ What is the primary use of this setting ring? The setting ring is a 32 mm reference used for micrometer calibration, plug gauge verification and bench comparison in metrology and workshop inspection. Which standards does the ring comply with? Manufactured to meet DIN 2250 and DIN 286 in JS 3 tolerance class, the ring provides a standardised reference for calibration and inspection tasks. What material and surface finish are used? The ring is made from hardened, lapped gauge steel, offering a wear‑resistant, low‑friction contact surface for repeatable measurements. Is the ring suitable for integration into existing gauge sets? Yes, the Form C profile and standard diameter make the part readily compatible with common fixtures, comparators and setting procedures in workshop and laboratory environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
325mm Setting Ring Hardened Gauge Steel Form C, DIN 2250/DIN 286 JS4 - Metav IndustryLine
Take advantage of the combination of hardened and lapped gauge steel, conformity to DIN 2250 / DIN 286 JS4 and a stable Form C geometry for repeatable reference measurements; order directly via Metav Werkzeuge or consult our specialists for application support. Setting ring 325 mm — hardened gauge-steel ring gauge (Form C) by Metav IndustryLine Setting ring 325 mm is a precision ring gauge intended as a stable master for workshop and production inspection, offering a robust reference for fixture setting and go/no-go verification in mechanical engineering. Hardened and lapped gauge steel Conforms to DIN 2250 / DIN 286 JS4 Form C geometry for secure seating 325 mm diameter for medium-format components Repeatable reference for process control and inspection The Setting ring 325 mm is manufactured from hardened and lapped gauge steel, providing a wear-resistant surface that maintains dimensional stability under frequent use. Conformity to DIN 2250 and DIN 286 JS4 ensures the ring functions as a certified reference within defined tolerance bands, which supports traceable in‑process checks and stable quality control routines. Using a standardised reference reduces rework and increases process confidence. Robust construction for handling and fixturing With a nominal diameter of 325 mm and a mass of 28.8 kg, this ring offers the stiffness required for secure seating and reliable measurement transfer during fixture set-up. The Form C geometry provides consistent contact conditions for mating components, improving repeatability when used as a datum in jigs or test benches. Its solid construction minimises deformation under handling, making it suitable for regular workshop use where repeatable alignment is essential. Practical integration into inspection workflows Designed as a workplace master, the ring gauge supports quick go/no-go checks and reference verifications without complex procedures. The lapped finish simplifies tactile assessment and prolongs service life, while the adherence to recognised standards helps in documenting conformity during audits. For operators seeking dependable reference artefacts, this gauge streamlines routine checks and contributes to a resilient measurement chain in production environments. Contact Metav Werkzeuge today to request specification support for the Metav IndustryLine setting ring and to discuss matching gauges for a complete reference set — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M313.325 GTIN: 4054469167190 Manufacturer: Metav IndustryLine Eclass: 21170104 Core data Diameter: 325 mm Weight: 28.8 kg Tariff number: 90173000 Material & features Material: hardened and lapped gauge steel Tolerance: DIN 2250; DIN 286, JS4 Form: C FAQ What is the intended use of this ring gauge? The setting ring is intended as a stable workshop reference for fixture setting, go/no-go verification and routine dimensional checks in mechanical engineering; the Metav IndustryLine ring gauge M313.325 is optimised for medium-format components. Which standards does the gauge comply with? The gauge conforms to DIN 2250 and DIN 286, JS4, providing defined tolerance classes suitable for production inspection and documentation. How durable is the surface finish under frequent use? The hardened and lapped surface is designed for wear resistance and long service life; regular visual inspection and proper handling will preserve measurement reliability. Is this ring suitable for use as a datum in jigs and fixtures? Yes — the Form C geometry and robust construction of the setting ring make it well suited as a datum for fixturing and repeatable seating in test benches. What handling should be observed given the weight? At approximately 28.8 kg, safe handling procedures should be used; secure transport and stable placement during measurement are recommended to avoid impact and preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33 mm Setting Ring, Hardened Gauge Steel Form C, DIN 2250 / DIN 286 JS3 - Metav IndustryLine
Robust hardened, lapped gauge steel, DIN‑compliant tolerance and a compact 33 mm diameter make this setting ring an economical, durable reference for workshop inspection and tool setting; order the part directly via Metav Werkzeuge or consult our specialists for application advice Setting ring 33 mm (M313.033) — Ring gauge, Form C, hardened and lapped, Metav IndustryLine The Setting ring 33 mm is a Form C ring gauge intended as a traceable reference for dimensional inspection, instrument setting and routine quality checks in metrology and workshop environments 33 mm diameter, Form C Hardened and lapped gauge steel DIN 2250 / DIN 286 compliant Tolerance grade JS 3 Consistent reference for inspection and process control A compact 33 mm ring gauge supplies a stable, repeatable reference that supports fast in‑process checks and instrument setting. The conformity to DIN 2250 and DIN 286 with tolerance JS 3 ensures that measurements made against this ring are traceable to recognised national standards, reducing ambiguity in pass/fail decisions. Using a standardised reference speeds calibration routines and lowers the rate of rework, thereby improving production throughput and measurement reliability. Hardened, lapped construction for long service life Manufactured from hardened gauge steel and finished by lapping, this ring gauge delivers a wear‑resistant measuring surface with a fine contact finish. The hardening process increases resistance to abrasion and deformation, while the lapped surface minimises micro‑asperities that can cause repeatability errors. The result is a durable reference standard that maintains dimensional stability under frequent use, translating into fewer replacements and a lower total cost of ownership. Practical advantages in the workshop and quality lab The Form C geometry provides a compact profile that is easy to seat and align during measurement tasks, making the gauge practical for rapid checks and for setting calipers or micrometers. As a purpose‑made ring gauge, it integrates naturally into inspection jigs and test benches and streamlines standard operating procedures. Clear standards compliance and robust material choice combine to deliver reproducible results and dependable documentation for quality control workflows. Contact Metav Werkzeuge GmbH in Emmerich for availability, technical details and ordering: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M313.033 GTIN: 4054469120706 eClass: 21170104 Tariff code: 90173000 Facts Diameter: 33 mm Tolerance: JS 3 Form: C Special features Material: gauge steel, hardened and lapped Standards: DIN 2250 and DIN 286 Category: gauges / measuring instruments Brand: Metav IndustryLine FAQ What is the intended use of this ring gauge? The setting ring 33 mm (ring gauge, M313.033) is designed as a reference for dimensional inspection, instrument setting and routine quality checks in workshops and inspection labs. Which standards does the gauge meet? The ring gauge conforms to DIN 2250 and DIN 286 and is supplied to tolerance grade JS 3 for consistent, standardised inspections. How does the hardened and lapped finish benefit measurement? Hardened, lapped surfaces on the setting ring minimise wear and provide a fine contact surface that improves repeatability and long‑term dimensional stability during frequent checks. Can this gauge be used for setting calipers and micrometers? Yes. The Form C design and the precise 33 mm diameter make the gauge suitable for setting and verifying measuring instruments as part of routine calibration and setup tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33/49/92 HD Shore D Comparison Plates Set, Three-Piece, ±2 HD Tolerance, Supplied in Case - Metav IndustryLine
Benefit from a reliable set of Shore D reference plates offering hardness points of 33, 49 and 92 HD with a tolerance of ±2 HD, delivered in a protective transport case for safe handling — order the set directly via Metav Werkzeuge or consult our advisors for application guidance. Shore D comparison plate set M208.362 — Metav IndustryLine reference plates with defined hardness points and transport case The Shore D comparison plate set provides stable reference surfaces for verification of Shore D hardness testers, designed for routine checks in workshops and inspection environments. Reference plates for Shore D testers Hardness points 33 / 49 / 92 HD Tolerance up to ±2 HD Supplied in transport case Reliable benchmark for routine hardness checks The set functions as a concise, shop-floor benchmark to detect instrument drift and to verify measurement consistency. Each reference surface is specified at 33/49/92 HD and manufactured to a tolerance of ±2 HD, so readings can be compared quickly against stable reference points. Using defined hardness points simplifies daily acceptance checks and shortens the time needed to decide whether an instrument requires service or adjustment, supporting efficient quality control and reduced rework. Compact, workshop-ready design with secure transport With compact dimensions of 50 x 50 x 8 mm and a low mass, the plates are easy to handle and store. The three-piece set arrives in a protective transport case, minimising the risk of damage during storage or transfer between workstations. The small footprint and robust packaging make the set suitable for mobile inspections and shop-floor routines where space is limited but reliable references are required. The practical design keeps reference surfaces accessible and intact, preserving repeatability over time. Practical integration into inspection and QC routines These comparison plates provide clear, repeatable reference points that fit into existing hardness-testing procedures for elastomers and polymers measured on Shore D scales. Regular use of the set helps maintain measurement traceability within the workshop and supports decision-making in incoming inspection or final checks. The set is offered by Metav IndustryLine and is identified as M208.362, making it straightforward to order replacement or additional sets and to document which reference standard was used during an inspection. For assured reference checks and shop-floor compatibility, request the Metav IndustryLine Shore D comparison plate set M208.362 via Metav Werkzeuge or contact our advisors at info@metav-werkzeuge.com / +49 2822 7131930 for application-specific guidance Technical data Article number: M208.362 SKU: M208.362 Manufacturer: Metav IndustryLine Pieces per set: 3 Weight: 0.1 kg Facts Dimensions: 50 x 50 x 8 mm Hardness values: 33 HD, 49 HD, 92 HD Tolerance: ±2 HD Set weight: 0.1 kg Special features Suitable for Shore D hardness testers Transport case included (plastic or wooden) Three reference plates for comparative checks Intended for routine verification and shop use FAQ Which hardness points are included in the set? The set contains reference plates specified at 33 HD, 49 HD and 92 HD, intended as fixed comparison points for Shore D measurements. What tolerance applies to the reference plates? Each plate is manufactured to a tolerance of ±2 HD, providing defined limits for quick verification of instrument readings. Can the plates be used on the shop floor and for mobile inspections? Yes, the compact 50 x 50 x 8 mm plates and included transport case make the set suitable for workshop use and for carrying between inspection sites. How many plates are supplied and how are they delivered? The delivery comprises a three-piece set supplied in a protective transport case to safeguard the reference surfaces in transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Limit Go/No-Go Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
Take advantage of the combination of DIN 2245 conformity, hardened gauge steel construction and a precise H7 nominal diameter for fast, reproducible pass/fail inspection in production and control rooms. Order the Limit plug gauge M314.033 directly via Metav Werkzeuge or ask our consultants if application advice is required. Limit plug gauge M314.033 – 33.0 mm H7, DIN 2245 (Metav IndustryLine) The Limit plug gauge M314.033 is a hardened gauge-steel plug designed for fast go/no-go testing of 33.0 mm H7 bores in production and inspection environments DIN 2245-compliant H7 tolerance Hardened gauge steel construction 33.00 mm nominal diameter Suitable for rapid go/no-go inspection Speed and reliability to reduce inspection time The gauge is manufactured to DIN 2245, providing a clear, industry-recognised basis for acceptance checks. As a dedicated limit plug gauge, it offers binary pass/fail results that remove ambiguity from routine inspections, which shortens cycle times and reduces downstream rework. The straightforward check procedure helps maintain steady output rates and supports consistent quality control without complex measuring protocols. Durable construction for repeated use Made from hardened gauge steel, the tool resists wear during repeated insertion and removal cycles, so tolerances remain stable over long production runs. The robust material choice translates into extended service life and fewer replacements, which benefits maintenance planning and total cost of ownership. The gauge's finish and heat treatment are chosen to preserve the reference dimensions under normal workshop conditions. Practical benefits for the workshop and inspection bench A simple plug gauge eliminates the need for elaborate setups when a quick verification is required. Using a limit plug like this one speeds throughput on assembly lines and in inspection stations by enabling rapid decisions on acceptance. The clear H7 designation and the DIN conformity ease documentation and audit trails, providing measurable evidence for in-process quality control and reducing administrative friction. Selection and handling guidance for consistent results Choose the nominal diameter and tolerance class that match the drawing specification to ensure meaningful checks; in this case the 33.0 mm H7 designation corresponds to the intended bore tolerance. To preserve performance, handle the gauge with care, store it in a dry protected location, and avoid impacts that could deform the reference surface. Regular visual inspection for nicks or corrosion will help detect wear early and maintain reliable go/no-go verification. Select Metav IndustryLine’s Limit plug gauge M314.033 for dependable H7 acceptance testing; contact Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or +49 2822 7131930 for application guidance and order support Technical data Article number: M314.033 GTIN: 4054469121611 eClass: 21170218 Standard: DIN 2245 Numbers / Core technical data Nominal diameter: 33.0 mm Tolerance class: H7 Customs tariff number: 90173000 Special features / Construction Material: gauge steel, hardened Designed as a limit plug gauge for go/no-go inspection Category: gauges / plug gauges Brand: Metav IndustryLine FAQ What is a limit plug gauge used for? A limit plug gauge is used for quick pass/fail verification of bore diameters; the Limit plug gauge M314.033 checks whether a 33.0 mm H7 bore meets the acceptance criteria. Does this gauge comply with recognised standards? Yes, the gauge is manufactured to the DIN 2245 specification, ensuring it meets common workshop and production standards for limit gauges. How is the pass/fail decision achieved with this gauge? Acceptance is binary: if the plug enters the bore smoothly it indicates the hole is within the H7 limit; if it does not fit, the bore is out of tolerance. Can the gauge be used on different materials and surface finishes? The gauge itself is made from hardened gauge steel and is suitable for testing bores in typical industrial components; surface finish and lubrication can affect fit and should be considered during inspection. What care does the gauge require to maintain accuracy? Store the tool in a dry, protected place and inspect visually for damage; avoid impacts and contamination to preserve the reference dimension and wear resistance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
34 mm Limit Plug Gauge H7 DIN 2245 Hardened Gauge Steel - Metav IndustryLine
The product data cannot be processed because of contradictory entries: the item is recorded simultaneously as rejected and as fit for use, and the weight information is inconsistent across the record. A reliable, production-ready description cannot be generated while these discrepancies remain, as inventing or assuming details would risk providing incorrect technical guidance. Please review and correct the source data—particularly the item's quality status and the weight measurements—and then submit the record again. If help is needed to resolve the inconsistencies, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Please quote the SKU M314.034 and GTIN 4054469121628 when requesting support. Once the data are consistent, a complete British English product description will be produced.
34 mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Take advantage of a DIN 2250‑compliant reference ring made from hardened and lapped gauge steel for consistent, repeatable checks; the compact 34 mm diameter and Form C geometry ensure secure seating and reliable alignment during inspection. Order the M313.034 setting ring from Metav Werkzeuge or consult the Metav team for selection advice. M313.034 setting ring — 34 mm setting ring, hardened gauge steel (Metav IndustryLine) The M313.034 setting ring is a compact, standard‑compliant reference gauge designed for fast dimensional verification and calibration routines in workshop and inspection environments. *DIN 2250 compliant reference ring *Hardened and lapped gauge steel *Form C geometry for stable seating Consistent reference quality for everyday inspection The setting ring serves as a reference gauge for dimensional checks where repeatability matters. Manufactured to DIN 2250 and DIN 286, JS 3 tolerances, the component provides a defined nominal diameter of 34 mm, enabling quick go/no‑go verification and gauge block comparisons. The hardened and lapped gauge steel finish reduces surface wear and maintains diameter stability over repeated contact cycles, which lowers the need for frequent rework of inspection setups and supports faster throughput in quality control tasks. Stable geometry that reduces measurement uncertainty The Form C design delivers reliable seating and alignment on shafts or mandrels, limiting lateral play during measurement. This geometric choice improves contact consistency between the ring and the measured part, so measurers obtain more repeatable results with standard micrometres, plug gauges or calipers. By combining robust material treatment with precise form control, the gauge reduces variables that can inflate measurement uncertainty, supporting efficient decisions in production monitoring and incoming inspection. Integrates into precise, pragmatic workflows As a compact reference tool, the gauge ring is straightforward to integrate into bench inspection stations, gauge sets or master ring assortments. Its compliance with established standards simplifies documentation and audit processes, while the compact diameter and robust finish make it suitable for frequent handling. For procurement and workshop managers the clear standard conformity and durable construction translate into fewer replacements, reliable traceability and predictable inspection outcomes—qualities that help maintain steady production quality without undue overhead. For robust, standard‑compliant setting rings choose Metav IndustryLine — contact Metav Werkzeuge for product selection and supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M313.034 GTIN: 4054469120713 eCl@ss: 21170104 Facts Diameter: 34 mm Standards: DIN 2250; DIN 286, JS 3 Tariff code: 90173000 Special features Material: hardened and lapped gauge steel Geometry: Form C Application: reference gauge for dimensional verification FAQ What tolerance class does this setting ring meet? The M313.034 setting ring is manufactured to DIN 2250 and DIN 286 with a JS 3 tolerance grade as stated in the product specification. Can the ring be used for go/no‑go checks on shafts? Yes, the Form C geometry and hardened finish make the ring suitable as a plug‑type reference for go/no‑go and comparative shaft inspections using contact gauges. Is the material resistant to wear from frequent use? The M313.034 is produced from hardened and lapped gauge steel, which offers enhanced surface durability for repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35 mm Limit Go/No-Go Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
Take advantage of the combination of DIN 2245 conformity, hardened gauge steel and a precise H7 fit to secure repeatable in-process inspection. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. M314.035 Limit Plug Gauge – 35.0 mm (DIN 2245, H7) by Metav IndustryLine The M314.035 is a limit plug gauge designed to verify internal diameters to DIN 2245 with an H7 tolerance, suitable for workshop and production quality control. DIN 2245 standard, H7 tolerance Hardened gauge steel construction Precision ground 35.0 mm diameter Reliable inspection for production control A dedicated limit plug is the most direct way to confirm whether a bore meets a specified tolerance band. The M314.035 functions as a simple go/no‑go check: the H7 fit checks compliance to the stated hole tolerance in one quick step, reducing inspection time and avoiding lengthy measuring procedures. Because the gauge is manufactured to DIN 2245, it delivers a standardised verification method that integrates seamlessly into routine quality control and first‑off inspections, improving throughput and lowering the risk of downstream rejects. Robust construction for repeatable measurements Built from hardened gauge steel, the device is designed for long service life under frequent handling. The precision ground 35.0 mm shank resists wear and maintains dimensional integrity, which supports consistent pass/fail decisions over many cycles. The construction emphasises stability and resistance to surface damage; this translates into fewer replacements and a predictable inspection budget. For production environments where reproducibility is paramount, the mechanical simplicity of a limit plug offers a reliable complement to dimensional measuring instruments. Traceability and process documentation made straightforward The gauge provides an uncomplicated route to traceable checks within a production chain. Marking and SKU identification allow audits to reference the exact master used in inspections. Use of a standardised plug gauge shortens documentation time for quality records and helps demonstrate compliance during internal audits or customer inspections. When traceable certification or specific calibration status is required, Metav Werkzeuge can advise on the available options and accompanying documentation to meet process control needs. Contact Metav Werkzeuge for supply and technical guidance on the M314.035 limit plug gauge, supplied from our Emmerich hub and supported by our inspection specialists Technical Data Article number: M314.035 GTIN: 4054469121635 Manufacturer: Metav IndustryLine Facts Diameter: 35.0 mm Standard: DIN 2245 eClass: 21170218 Tariff number: 90173000 Special features Material: hardened gauge steel Tolerance: H7 Category: Limit plug gauge / Lehre FAQ What does the H7 tolerance indicate for this gauge? The H7 designation identifies the tolerance band against which the M314.035 limit plug gauge is set; it defines the acceptable bore size range so a quick go/no‑go verification can be performed. Is the M314.035 suitable for serial production checks? Yes, the robust, hardened‑steel construction and DIN 2245 conformity make the M314.035 well suited to repeated in‑process checks in serial production. How is the M314.035 identified for traceability? Identification is possible via the Article number M314.035 and GTIN 4054469121635; these references allow audits to document which master gauge was used during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
350mm Setting Ring Hardened Gauge Steel Form C, DIN 2250/DIN 286 JS4 - Metav IndustryLine
Take advantage of the combination of industrial conformity, durable construction and stable measurement behaviour for reliable calibration results; order the ring gauge directly via Metav Werkzeuge or contact our consultants for further specification advice. M313.350 Setting ring 350 mm — hardened gauge steel, Form C (Metav IndustryLine) The M313.350 setting ring is a precision ring gauge designed for calibration and verification tasks in inspection, gauge room and workshop applications, providing a stable reference at a nominal diameter of 350 mm. Hardened gauge steel, lapped finish Conforms to DIN 2250 / DIN 286, JS4 350 mm nominal diameter, Form C accuracy Precision and conformity for calibration tasks The setting ring is manufactured from hardened gauge steel with a lapped finish, producing a stable, wear‑resistant measuring surface that is suitable as a master for calibration and go/no‑go verification. Conformity to DIN 2250 and DIN 286 with tolerance class JS4 ensures that the ring can be used where documented traceability and repeatable comparison measurements are required. The nominal diameter of 350 mm is achieved and controlled during production to provide a reliable reference for ring gauges, mandrels and mating components, reducing uncertainty in routine inspection tasks. Built for repeatability and workshop durability Robust construction and surface finishing minimise surface wear and maintain form over repeated use, so reproducible results are delivered without frequent adjustment. The Form C profile is suitable for many standard calibration procedures and is dimensionally stable thanks to controlled hardening and precision lapping. The mass and section of the ring contribute to thermal and mechanical stability during measurement, which supports consistent readings when used in a controlled inspection environment. This design reduces the need for corrective interventions and simplifies routine quality checks. Seamless integration into inspection workflows The ring gauge is intended to be integrated into standard inspection workflows where documented conformity and clear identification are important. Identification data such as GTIN and article number enable straightforward inventory and quality‑management tracking, while compatibility with established calibration procedures supports accreditation paths. Use of this ring as a master reference streamlines comparative measurements and assists in maintaining instrument traceability across the workshop or laboratory, improving process control and audit readiness. For traceable calibration and dependable master references, specify the Metav IndustryLine M313.350 setting ring and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M313.350 GTIN: 4054469167206 ECLASS: 21170104 Tariff code: 90173000 Designation: Setting ring 350 mm, hardened gauge steel Facts Diameter: 350 mm Weight: 30.2 kg Nominal tolerance class: JS4 Special features Material: hardened and lapped gauge steel Form: Form C Standards: DIN 2250; DIN 286 Category: Gauges / Lehren FAQ What is the intended use of this 350 mm ring gauge? The M313.350 setting ring is intended as a precision reference for calibration, inspection and dimensional verification of mating parts and measuring instruments. Which standards and tolerance class apply to this gauge? This ring corresponds to DIN 2250 and DIN 286 and is manufactured to tolerance class JS4 for consistent conformity in inspection routines. Is the surface treatment suitable for long‑term use in a workshop? Yes, the hardened and lapped finish provides wear resistance and maintains form for extended use, making it suitable for routine workshop and calibration‑room tasks. How should the ring be handled to preserve accuracy? Handle the setting ring with care, store it in a clean, temperature‑stable environment and avoid impacts; regular calibration checks are recommended to verify continued conformity. Can this ring be used as a master for setting other gauges? Yes, the M313.350 is designed as a master reference for setting and verifying other gauges and inspection equipment within its dimensional range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS3 - Metav IndustryLine
Combining DIN-compliant accuracy, hardened, lapped gauge steel and a compact 35 mm diameter, this setting ring ensures reproducible reference points in production and inspection. Order the gauge ring directly via Metav Werkzeuge or consult our specialists if assistance is required. Gauge Ring 35 mm (DIN 2250) — Hardened Gauge Steel, Form C — Metav IndustryLine The Gauge Ring 35 mm is a compact setting ring designed for precision gauging and go/no-go tasks in machine shops and inspection benches. Diameter 35 mm precision gauge Hardened and lapped gauge steel construction Conforms to DIN 2250 and DIN 286, JS 3 Form C profile for reproducible setting Precision reference for routine setting and control The compact ring serves as a stable reference when setting fixtures, aligning shafts or checking bore dimensions. Manufactured from hardened, lapped gauge steel, the component provides a wear‑resistant contact surface that maintains dimensional integrity under repeated use. Conformity with DIN 2250 and DIN 286, JS 3 gives a verifiable standard basis for pass/fail gauging and supports traceable inspection routines in production environments. Practical benefits in the workshop and inspection room With a focused 35 mm diameter and Form C profile, the ring is optimised for reproducible positioning in jigs and devices where axial location matters. The modest footprint reduces handling time and simplifies integration into existing gauge sets or test fixtures, improving throughput. The lapped finish reduces friction and scoring on mating parts, which prolongs service life and lowers maintenance intervals — a clear efficiency gain for repetitive quality control tasks. Robustness and traceability for dependable results The material choice and finishing process result in a stable artefact that tolerates frequent contact without rapid degradation, supporting consistent measurement practice over time. Supplied under the Metav IndustryLine umbrella, the component benefits from the company’s procurement and quality‑filter processes in Emmerich, which stand for wide availability and documented reliability. For operations requiring certified traceability, Metav’s catalogue and advisors can outline calibration and documentation options that align with internal quality systems. For specification checks, procurement advice or to confirm compatibility with existing gauges, contact Metav Werkzeuge GmbH — Metav IndustryLine specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with ordering and technical details. Technical data Article number: M313.035 GTIN: 4054469120720 Brand: Metav IndustryLine Category: Gauges / Setting rings Facts Diameter: 35 mm eCl@ss: 21170104 Tariff code: 90173000 Form: C Special features Material: Hardened and lapped gauge steel Standards: DIN 2250 and DIN 286, JS 3 Application: Setting, reference and go/no-go gauging Label: Einstellring 35 mm, DIN 2250 FAQ What is the intended use of this gauge ring? The gauge ring is intended as a precision reference for setting fixtures, aligning spindles and performing go/no-go checks in workshop and inspection environments; the Metav IndustryLine Gauge Ring 35 mm fulfils these tasks with a hardened, lapped surface. Is the ring compliant with industry standards? Yes; the product conforms to DIN 2250 and DIN 286, JS 3, ensuring compatibility with standardised gauging procedures. What material is used and why does it matter? Constructed from hardened, lapped gauge steel, the ring offers high wear resistance and a smooth contact surface, which preserves dimensional accuracy during repeated use. Can this ring be integrated into existing gauge sets? The compact 35 mm diameter and Form C profile allow straightforward integration into gauge assemblies and fixture tooling where axial location and repeatability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
36 mm Limit Go/No-Go Plug Gauge H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Product data contains contradictory information (conflicting weight values: 0.6 kg vs 0.8 kg); please verify the source data and supply corrected specifications. It is essential to ensure accuracy in the provided details to avoid any confusion or errors in product listings, descriptions, or customer communications. Discrepancies in weight values can impact shipping calculations, pricing, and overall customer satisfaction. Kindly review the original source data thoroughly and confirm the correct weight value. Once verified, please update the specifications accordingly to maintain consistency and reliability in the product information. Accurate data is crucial for operational efficiency and customer trust.
36 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS 3 - Metav IndustryLine
Take advantage of precise reference standards and robust construction to secure reproducible setup and measurement routines. The combination of hardened, lapped gauge steel and DIN 2250 / JS 3 conformity ensures long service life and reliable interchangeability; order direct via Metav Werkzeuge or consult the technical team for application support. Setting ring 36 mm — Ring gauge, hardened and lapped | Metav IndustryLine The Setting ring 36 mm is a precision ring gauge designed as a reference master for setting and verifying external diameters in workshop and inspection environments. Hardened, lapped gauge steel DIN 2250 / DIN 286, tolerance JS 3 Form C geometry for stable seating GTIN traceable product identification Consistent reference for tool setup and inspection A ring gauge in hardened and lapped finish functions as a stable reference for adjusting measuring instruments and setting machine tools. The combination of DIN 2250 and JS 3 tolerance class provides a clear, standardised basis for interchangeability and conformity assessment, reducing uncertainty in go/no‑go decisions. By using a purpose‑made gauge ring, machining and inspection steps become more predictable: calibration intervals are easier to plan and in‑process checks gain repeatability. The measured diameter of 36 mm is produced to exacting specifications, allowing reliable comparison with micrometres and calipers during routine quality checks. Durable construction that minimises rework and downtime Manufactured from hardened and lapped gauge steel, the component resists wear and preserves the reference surface under repeated use. The lapped surface reduces friction and contact wear, which extends the usable lifetime and keeps dimensional drift low. This build quality translates into fewer unplanned adjustments and lower risk of rework, supporting efficient production flows. The Form C design ensures a stable seating condition on cylindrical parts, improving repeatability when setting mandrels, fixtures or comparators. Clear conformity and practical integration in the workshop Specification and traceability are designed for straightforward integration: the gauge adheres to DIN 2250 and DIN 286, and carries a unique GTIN and SKU for inventory control and procurement. For workshop managers and quality engineers, this means easier documentation and traceable records for measuring standards. The robust geometry suits regular handling and the part is intended as a tactile reference for external diameter checks; the ring performs equally well when used alongside precision calipers, micrometres or comparator stands. If additional technical data or certificates are required for in‑house quality systems, Metav Werkzeuge can supply further documentation and advice. For certified measuring standards from Metav IndustryLine and personalised ordering advice, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 to request the setting ring M313.036 and related measurement equipment Technical Data Article number: M313.036 GTIN: 4054469120737 Material: hardened and lapped gauge steel Diameter: 36 mm Norm: DIN 2250 / DIN 286, JS 3 Measurable data eClass: 21170104 Tariff number: 90173000 SKU: M313.036 Special features Form C Traceable GTIN and SKU Intended as a reference master for external diameters FAQ What is the intended use of this setting ring? The setting ring M313.036 from Metav IndustryLine is intended as a precision reference master for setting and verifying external diameters in workshop and inspection tasks. Which standards govern the tolerance of the gauge? Tolerance and dimensional specification conform to DIN 2250 and DIN 286 with a JS 3 tolerance class, as stated for the Metav IndustryLine setting ring. What material and surface finish does the gauge have? The gauge is made from hardened and lapped gauge steel, providing wear resistance and a low‑friction reference surface for repeated use. How can the setting ring be ordered or further information obtained? Order enquiries and requests for additional documentation can be directed to Metav Werkzeuge GmbH; reference the SKU M313.036 when contacting the supplier. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com