Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
4.98mm Gauge Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Secure repeatable results with a 4.98 mm gauge pin that delivers ±0.001 mm accuracy and a practical 50 mm length in a robust workshop design; order the gauge pin directly via Metav Werkzeuge or consult our specialists if needed. Metav IndustryLine Gauge pin M323.498 — 4.98 mm, ±0.001 mm A gauge pin M323.498 engineered for precision end‑measure checks in micro‑range metrology and compact fixture inspection. Diameter 4.98 mm for tight fits Tolerance ±0.001 mm for high repeatability Length 50 mm suited to standard fixtures Workshop version in special steel, transport box Precision that secures your inspection results The core advantage of this gauge pin is its ±0.001 mm manufacturing tolerance, which translates directly into measurable certainty during inspection and assembly tasks. For metrology processes where a few micrometres determine pass or fail, the tight tolerance minimises ambiguity and supports reproducible quality checks. Described here as a micro‑range reference, the component is particularly valuable where small diameters require consistent plug‑fit verification. Robust workshop design for everyday handling Constructed from special steel and specified as a workshop version, the pin resists typical shop stresses while remaining straightforward to handle. A 50 mm overall length offers compatibility with common fixture depths without becoming cumbersome; the modest weight facilitates rapid changeover in inspection routines. Delivery in a protective transport box ensures the reference surface remains unmarred from dispatch to first use. Tailored for micro‑range metrology and end‑measure tasks With a diameter of 4.98 mm, this test plug sits within the micro classification for precision tools, making it suitable for fine‑mechanical work such as small housings, pins and precision jigs. The geometry lends itself to end‑measure checks and dimensional verification where space is limited but tolerance requirements are stringent. Using a dedicated gauge like this reduces setup time and clarifies go/no‑go decisions in production sampling. Practical benefits for quality workflows Beyond pure accuracy, the simple form factor of the pin supports quick insertion, repeatable seating and easy visual inspection for wear. As a single‑piece gauge, it integrates smoothly into check fixtures or control benches and complements digital measurement systems by providing a stable reference. The compact nature of the component makes it a convenient addition to calibration kits and on‑bench inspection sets. Choose Metav IndustryLine for consistent micro‑range accuracy — order the Metav IndustryLine gauge pin M323.498 through Metav Werkzeuge or request tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.498 GTIN: 4061905059711 ECLASS: 21170231 Product label: Gauge pin, single, 4.98 mm, ±0.001 mm, length 50 mm Facts Diameter: 4.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.01 kg Measuring range (max): 4.98 mm Special features Material: special steel Workshop version Supplied in a protective transport box Intended for micro‑range end‑measure applications FAQ What tolerance does this gauge pin offer? The gauge pin M323.498 is manufactured to a tolerance of ±0.001 mm, delivering high repeatability for precision checks. What material is used for the pin? This gauge pin is made from special steel, selected for durability in workshop environments. Which applications suit a 4.98 mm pin? Its 4.98 mm diameter and micro classification make it suitable for fine mechanics, small fixtures and end‑measure verification tasks. How is the item packaged for delivery? The gauge pin is supplied in a protective transport box to prevent damage during shipment. What are the SKU and GTIN for ordering? SKU M323.498, GTIN 4061905059711 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.99mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine sub‑micron accuracy with a robust special‑steel build and a compact 50 mm form factor for dependable end‑measurements. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge Pin M323.499 — 4.99 mm, ±0.001 mm (Metav IndustryLine) The Gauge Pin M323.499 is a precision workshop test pin intended for accurate end‑measurements and dimensional verification in machine shops and inspection benches. ±0.001 mm tolerance for high precision Special steel for durable wear resistance 50 mm length for compact inspection reach Reliable, repeatable accuracy for critical end measurements A tolerance of ±0.001 mm places this test pin in the category of high‑precision dimensional control suitable for fine inspection tasks. The nominal diameter 4.99 mm and tight allowance minimise measurement uncertainty when checking end‑masses or mating bores, reducing the risk of faulty assemblies. The stated accuracy refers to the manufacturing variation of the pin itself; when used with calibrated gauges and stable fixtures, the pin enables consistent, traceable checks that support quality‑control routines and help avoid costly rework. Durable construction built for workshop conditions Engineered as a workshop version, the pin is manufactured from special steel chosen for a balance of hardness and toughness. The compact 50 mm length and low mass (approx. 0.01 kg) make the component easy to handle and position in confined inspection set‑ups, while maintaining sufficient stiffness to avoid deflection during contact checks. This combination of material choice and geometry ensures long service life under repeated use and contributes to stable measurement results over many cycles. Practical identification and system integration Traceability and logistics are supported by clear identifiers: SKU M323.499 and GTIN 4061905059728, which simplify stock management and process documentation. The item is targeted at precise end‑measurement tasks and is suitable for integration into workshop inspection flows where compact test pins are required. For specific application scenarios or compatibility checks with existing fixtures, Metav’s technical advisors can provide further data and recommendations to align the component with production needs. Contact Metav Werkzeuge for tailored advice on specifying the Metav IndustryLine gauge pin M323.499 for inspection tasks or to discuss supply options — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M323.499 GTIN: 4061905059728 Manufacturer: Metav IndustryLine eClass: 21170231 Facts Length: 50 mm Diameter: 4.99 mm Tolerance: ±0.001 mm Weight: 0.01 kg Special features Material: special steel Workshop version (robust design) Application: end measurements Precision test pin for dimensional inspection FAQ What level of accuracy can be expected from this test pin? The Gauge Pin M323.499 delivers a manufacturing tolerance of ±0.001 mm, enabling high‑precision end‑measurements when used with appropriate fixtures and measurement equipment. Is the pin suitable for routine workshop inspection tasks? Yes. The workshop design and special‑steel construction make this test pin well suited to everyday dimensional checks and repetitive inspection activities. Does the product include a calibration certificate? No specific calibration is indicated for this item. If a calibrated delivery is required, specify calibration at the time of order so that Metav Werkzeuge can arrange the appropriate certificate. How is the part identified for inventory and traceability? Identification is provided via SKU M323.499 and GTIN 4061905059728 to facilitate stock control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.9mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
The combination of ±0.001 mm tolerance, a 4.90 mm diameter and a robust special steel finish ensures dependable end‑measure checks and long service life; order directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.490 — 4.90 mm diameter, ±0.001 mm tolerance, 50 mm length (Workshop version) A gauge pin designed for precise end‑measure and fit verification tasks in inspection benches and workshop environments, supplied as a single, workshop‑grade test pin. Workshop‑grade construction Diameter 4.90 mm ±0.001 mm Length 50 mm for end‑measure checks Supplied in protective transport case Precision that reduces rework and speeds inspection The small nominal diameter of 4.90 mm combined with an exacting ±0.001 mm tolerance provides highly reproducible results when checking bores, fits or end faces. Built from special steel, the pin maintains dimensional stability under typical workshop handling and resists wear during repeated use; this translates into fewer rejects, more reliable in‑process decisions and measurable time savings in quality control. The measurable accuracy supports traceable checks and integrates smoothly into standard inspection routines. Robust workshop design for daily use The workshop version brings practicality to precision: hardened surfaces and a compact 50 mm length make the test pin easy to handle while offering sufficient gripping length for repeatable measurement cycles. A single‑piece supply simplifies inventory and tool selection, and the protective transport case keeps the pin damage‑free between uses. The overall design balances durability with precise geometry, so calibration intervals are extended and downtime for replacements is reduced. Clear function for inspection and assembly processes As a dedicated end‑measure test pin, this item is suitable for rapid go/no‑go assessments, alignment checks and final inspection steps where narrow diameters must be verified. The defined tolerance window enables confident assembly decisions and supports statistical process control by providing consistent, verifiable reference points. Use in inspection benches, fixture checks or as a reference gauge in assembly processes underscores the rational benefit: faster quality throughput with lower uncertainty. For ordering and technical consultation on Metav IndustryLine precision tools contact Metav Werkzeuge in Emmerich: email info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on suitability and supply. Technical data Article number: M323.490 GTIN: 4061905058691 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 4,90mm, +/- 0.001 mm Länge 50 mm Core specifications Diameter: 4.90 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.01 kg Materials & features Material: Special steel Workshop version Single item supply Protective transport case FAQ What tolerance accuracy does the gauge pin offer? The gauge pin M323.490 is specified to ±0.001 mm, permitting very fine end‑measure checks for tight fits. Is the pin suitable for repeated workshop use? Yes, the workshop‑grade construction and special steel finish of this test pin are designed for repeated handling and inspection cycles. How is the item supplied for transport and storage? The test pin is supplied as a single item in a protective transport case to prevent damage during handling and storage. Can this pin be used for bore and fit verification? The 4.90 mm diameter and tight tolerance make this pin appropriate for bore checks, fit verification and end‑face assessments in assembly or inspection stages. Which brand produces this gauge pin and how can it be ordered? This item is offered under Metav IndustryLine; ordering and technical enquiries can be placed through Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 mm Go/No‑Go Plug Gauge H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Take advantage of a hardened gauge steel construction combined with DIN 2245 geometry and an H7 fit for reliable pass/no‑go verification of 40.0 mm bores. Order directly via Metav Werkzeuge or consult our technical advisors for integration into production control. Limit plug gauge M314.040 — 40.0 mm, DIN 2245 · H7 · Metav IndustryLine Limit plug gauge M314.040 is a hardened gauge‑steel go/no‑go plug designed for quick, repeatable inspection of 40.0 mm bores to DIN 2245 with H7 tolerance. Hardened gauge steel construction DIN 2245 compliant geometry H7 tolerance for 40.0 mm bores Reliable tolerance checking that speeds inspection The M314.040 functions as a straightforward pass/no‑go verifier for cylindrical bores, enabling rapid acceptance or rejection of components directly on the shop floor. Manufactured to DIN 2245, the gauge ensures the correct basic profile for cylindrical bore checks; the H7 tolerance setting specifies the permissible size window for the part under test. By using a hardened gauge steel body, the tool maintains dimensional stability over repeated cycles, which reduces rework and keeps inspection throughput high. This combination of standardised geometry and robust material gives a clear, quantifiable basis for process control and traceability. Durable construction for repeatable results and low maintenance The hardened construction provides high wear resistance and consistent tactile feedback during checks, so the plug gauge retains its reference dimensions for longer service intervals. Repeatability benefits production control: fewer disagreements between operators and less reliance on time‑consuming measuring instruments for routine go/no‑go decisions. The compact, single‑piece design minimises handling variables and supports seamless integration into incoming inspection or in‑process check routines. Where faster decision making and reduced cycle time matter, this gauge offers an efficient balance of durability and operational simplicity. Practical use, storage and quality assurance in the workshop In practice, the plug gauge is used by inserting the “go” end into the bore to confirm the minimum acceptable diameter and checking the “no‑go” condition to verify the upper limit. The gauge is suited to production inspection, sample checks and fixture set‑up verification. For quality assurance records, the item can be included in traceable inspection plans and, if required, submitted for formal calibration to maintain documented accuracy. Metav’s service orientation and central European distribution ensure straightforward availability and a clear quality filter for replacement or calibration cycles, reinforcing confidence in routine measurement tasks. For purchasing advice or to discuss integration into existing inspection processes with Metav IndustryLine, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M314.040 GTIN: 4054469121673 Category: Gauges / Limit gauges Facts Diameter: 40.0 mm Tolerance class: H7 Tariff number: 90173000 ECLASS: 21170218 Special features Material: hardened gauge steel Standard: DIN 2245 Function: pass/no‑go plug gauge for bores Intended use: bore inspection and production control FAQ What tolerance window does this gauge check? The plug checks bores to the H7 tolerance band at a nominal 40.0 mm, as manufactured to DIN 2245 for consistent geometry. Is the gauge suitable for production line inspection? Yes; the M314.040 is designed for rapid pass/no‑go checks and is appropriate for in‑process and incoming inspection tasks. Can the gauge be calibrated and documented? Calibration can be performed and documented to support quality systems; the tool is compatible with standard calibration procedures for gauges. What is the material and why does it matter? The gauge is made from hardened gauge steel, which provides wear resistance and dimensional stability during repetitive checking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 mm Setting Ring, Hardened Gauge Steel, Form C, DIN 2250 / DIN 286 JS3 - Metav IndustryLine
Take advantage of the combination of hardened, lapped gauge steel, DIN‑rated tolerances and compact Form C geometry for consistent diameter setting and repeatable inspection results. Order the setting ring 40 mm directly via Metav Werkzeuge or ask our consultants if needed. Setting ring 40 mm – hardened gauge steel, DIN 2250 (Metav IndustryLine) The Setting ring 40 mm is a precision gauge for setting and checking diameters in toolrooms and inspection tasks, designed to the DIN 2250 and DIN 286 standards with JS 3 tolerance. Hardened gauge steel, lapped surface DIN 2250 & DIN 286, JS 3 tolerance Precise 40 mm diameter Compact Form C geometry Precision where setup errors are costly The compact ring serves as a reference diameter for adjusting mandrels, checking bore gauges and calibrating inspection fixtures, delivering a reliable mechanical standard for routine quality control. Made from hardened, lapped gauge steel, the component provides a true running surface and low local deformation under clamping. Conformity to DIN 2250 and DIN 286 in tolerance class JS 3 gives a clear, verifiable accuracy class that speeds decision‑making on the shop floor and reduces rework. Robust shape for repeatable measurement The Form C profile concentrates stiffness where it matters, permitting secure support in fixtures without introducing measurement artefacts. Its compact 40 mm diameter makes it easy to handle while retaining the cross‑sectional rigidity required for short‑range reference work. The lapped finish ensures consistent contact conditions for plug gauges and inside measuring instruments, improving repeatability and reducing scatter in consecutive measurements. Designed for the workshop and inspection bay As a routine calibration and setup tool, the ring integrates into daily workflows: it streamlines gauge setting, shortens machine changeover and provides a stable master for comparative checks. Backed by Metav IndustryLine’s quality screening and supply from Metav Werkzeuge, the product supports dependable procurement and traceable equipment lists for workshops and quality departments. The combination of standard conformity and robust manufacture provides both operational efficiency and long‑term reliability. For reliable diameter setting with a hardened, lapped gauge steel reference choose the Metav IndustryLine setting ring 40 mm and order via Metav Werkzeuge; enquiries welcome by e‑mail info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: M313.040 GTIN: 4054469120768 ECLASS: 21170104 Tariff code: 90173000 Core dimensions Diameter: 40 mm Materials & features Material: hardened and lapped gauge steel Standards: DIN 2250; DIN 286; JS 3 Special shape: Form C Category: Gauges / Setting rings FAQ What tolerance class does the ring meet? The setting ring complies with DIN 2250 and DIN 286 and is manufactured to tolerance class JS 3, providing a defined accuracy level for routine setting and checking tasks. Which material is used for the reference surface? The reference is produced from hardened, lapped gauge steel, offering a durable and low‑deformation contact surface suitable for frequent use. Can this ring be used for setting plug gauges and mandrels? Yes, the ring is intended as a reference for setting plug gauges, mandrels and for comparative checks in the workshop or inspection bay. What does Form C mean for handling and fixturing? Form C indicates a compact, stiff profile that improves fixture support and reduces measurement distortion when the ring is clamped or located against a datum. Is the product suitable for small‑component inspection in toolrooms? Its 40 mm diameter and stable geometry make it well suited for toolroom use and short‑range inspection tasks, where compact precision masters are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Setting Ring Hardened Gauge Steel Form C, DIN 2250 / DIN 286 JS4 - Metav IndustryLine
High-repeatability reference for internal-diameter setting: the combination of hardened, lapped gauge steel, Form C geometry and compliance with DIN 2250 / DIN 286, JS4 delivers a stable master for workshop and production control; order the ring directly via Metav Werkzeuge or consult our specialists for application advice. Setting ring 400 mm — ring gauge (Form C) by Metav IndustryLine The Setting ring 400 mm is a Form C ring gauge designed as a reference master for setting and checking internal-diameter instruments in production and inspection environments. Form C geometry for straightforward use and mounting Hardened and lapped gauge steel for long-term stability Conforms to DIN 2250 / DIN 286, JS4 tolerances Nominal diameter 400 mm for medium-large bores Accuracy and repeatability for process control The ring serves as a reliable reference standard when repeatable internal-diameter settings are required on the shop floor. Manufactured from hardened, lapped gauge steel, the component offers dimensional stability and wear resistance that preserve calibration over time. Compliance with DIN 2250 and DIN 286 and the JS4 tolerance class ensures interchangeability with other standards-based gauges and enables consistent measurement chains. The nominal 400 mm diameter, combined with the ring’s mass and geometry, reduces deflection during handling and contributes to reproducible results, supporting faster setup times and fewer reworks in serial production. Practical benefits in calibration and routine use The Form C design simplifies engagement with bore gauges, setting masters and internal micrometers, turning a complex alignment step into a controlled procedure. The lapped contact surfaces provide a low-friction reference zone, which reduces measurement scatter and prolongs service life relative to untreated rings. As a workshop master, the item functions both as a calibration artefact and as a daily-setting tool, lowering machine downtime by enabling rapid, verifiable adjustments. Traceable markings and the robust construction reduce the frequency of maintenance cycles, making the ring a pragmatic investment for quality assurance routines. Handling, traceability and supply assurance With a mass of 33.5 kg, the ring offers inherent stability; however, safe handling procedures and appropriate lifting aids are recommended for transport and installation. The piece is supplied as a precision metrology instrument: material and finish are optimised for dimensional endurance and minimal surface change over repeated use. Procurement through Metav IndustryLine connects the user to a European quality filter and logistics hub in Emmerich, where stock and distribution support are combined with sector knowledge. This means access to a broad range of measurement solutions and the reassurance of supplier continuity for production-critical tooling. Contact Metav Werkzeuge today for detailed advice on Metav IndustryLine setting rings and to arrange supply from our Emmerich quality hub Technical data Article number: M313.400 GTIN: 4054469167213 Weight: 33.5 kg Material: hardened and lapped gauge steel Diameter: 400 mm Facts Nominal diameter: 400 mm Mass: 33.5 kg Customs tariff number: 90173000 SKU: M313.400 Special features Form C geometry Conforms to DIN 2250 and DIN 286, JS4 Lapped contact surfaces for low wear Suitable as a workshop reference master FAQ What is the intended use of this ring gauge? The ring gauge is intended as a reference master for setting and checking internal-diameter instruments and for routine verification in workshop and production environments; the 400 mm nominal size suits medium-large bores. How does the material treatment affect performance? Hardened and lapped gauge steel provides high wear resistance and a stable surface finish, so the ring maintains dimensional integrity and extends the interval between rework and recalibration. What tolerances does the ring meet? The component is manufactured to DIN 2250 and DIN 286 with a JS4 tolerance class, ensuring compatibility with standardised measurement systems and predictable interchangeability. Is this ring suitable for regular shop-floor use? Yes; the robust construction and lapped contact surfaces are designed for daily use as a setting master, though appropriate handling and lifting aids are advised given the mass. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Ceramic Setting Ring 0.001mm Accuracy, Stainless Antimagnetic HV1250 - Metav IndustryLine
Take advantage of the combination of ultra‑fine ±0.001 mm accuracy, zirconia ceramic material and HV 1250 hardness for reliable tool presetting and repeatable set‑ups; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic setting ring 40 mm 0.001 mm (53x14) — zirconia ceramic, ±0.001 mm accuracy (Metav IndustryLine) Ceramic setting ring 40 mm 0.001 mm (53x14) is a compact, workshop‑grade reference ring designed for precise set‑ups and repeatable measurement tasks across machining and metrology workflows. Zirconia ceramic, antimagnetic, stainless Accuracy ±0.001 mm for repeatable set‑ups Hardness HV 1250 for high wear resistance Workshop‑grade design for everyday use Reduce setup variability with micrometre‑grade accuracy A reference that delivers ±0.001 mm repeatability drastically reduces the uncertainty in tool presetting and gauge calibration. The fine tolerance equates to one thousandth of a millimetre, which in practical terms means more predictable first‑part quality and fewer iterative adjustments at the machine. The high HV 1250 hardness supports dimensional stability under contact loads, so the measurement reference remains consistent during routine handling. For production environments where cycle accuracy and short changeovers matter, this level of precision translates into measurable time savings and fewer failed parts. Material choice that keeps measurement stable over time Made from zirconia ceramic, the ring combines low thermal expansion with inherent wear‑resistance, producing a stable reference even under frequent use. The stainless and antimagnetic characteristics minimise corrosion and magnetic interference on the shop floor, so readings are not affected by local fields or surface degradation. As a workshop‑grade item, the component balances hardwearing performance with pragmatic handling — it resists surface damage better than many metals while remaining compact enough for quick placement during setup routines. Practical handling and integration into workshop routines The compact 40 mm diameter is well suited to tight tool‑preset areas and bench work where a small, reliable reference is preferred. Its geometry supports straightforward contact points for setting instruments and gauge interfaces, enabling reproducible positioning without complex fixturing. In everyday practice the ring streamlines the transition from measurement to machining: repeatable references mean fewer confirmation passes, and the durable ceramic surface reduces the need for frequent replacement. Traceability and part identification are simple as the item is sold as a defined workshop reference within the Metav IndustryLine range. For application guidance or to procure the Metav IndustryLine ceramic setting ring, contact Metav Werkzeuge in Emmerich — enquiries via info@metav-werkzeuge.com or +49 2822 7131930 are welcome for tailored advice and order support Technical data Article number: M313.K40 Name: Ceramic setting ring 40 mm 0.001 mm (53x14) Brand: Metav IndustryLine Facts Nominal diameter: 40 mm Accuracy: ±0.001 mm Hardness: HV 1250 Special features Material: zirconia ceramic Antimagnetic Stainless Wear‑resistant Workshop‑grade FAQ What level of precision can be expected from this setting ring? The Ceramic setting ring 40 mm 0.001 mm (53x14) provides a precision of ±0.001 mm, making it suitable for micrometre‑grade set‑ups and reference tasks. Why choose zirconia ceramic instead of metal for a setting reference? Zirconia ceramic offers low thermal expansion, high HV 1250 hardness and excellent wear resistance; the material properties of the Metav IndustryLine ring deliver stable dimensions and long service life compared with many metallic references. Is the ring suitable near magnetic fields or on magnetic workbenches? Yes — the ring is antimagnetic, so magnetic interference is not expected to affect contact measurements or cause handling issues. Can this item be used for routine tool presetting in a production environment? The workshop‑grade design and compact diameter make the ring practical for routine presetting and repeatable measurement tasks within machining and inspection workflows. How is the ring identified for ordering or stock control? The article is listed as M313.K40 and sold under the Metav IndustryLine brand as a ceramic setting ring with 40 mm nominal diameter and ±0.001 mm tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42 mm Go/No-Go Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
Precision and repeatability combined with robust workmanship: the hardened gauge-steel construction and adherence to DIN 2245 with H7 tolerance permit fast go/no-go acceptance checks while maintaining traceable conformity. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge 42.0 mm (DIN 2245 / H7) — Metav IndustryLine The Limit plug gauge 42.0 mm (H7) is a compact, shop‑ready go/no‑go cylindrical gauge designed for quick acceptance testing and routine size control in production and inspection environments. Hardened gauge steel construction DIN 2245 tolerance H7 Nominal diameter 42.0 mm Consistent size control for routine inspection This precision instrument supports fast verification of bore diameters by offering a clear go/no‑go decision at the point of measurement. Manufactured from hardened gauge steel, the gauge resists wear during repeated checks, which maintains the effective limit size over many cycles and reduces the need for frequent replacement. The adherence to DIN 2245 and the specified H7 class provides a recognised reference for conformity assessment and simplifies in‑process quality gates in machine shops and inspection benches. Built for repeatability and low effort handling A compact cylindrical design yields stable engagement in the bore and reduces wobble during manual checks, contributing to repeatable outcomes across operators. The instrument’s geometry and surface finish enable unmistakable tactile feedback on go/no‑go seating, turning a measurement decision into a fast, low‑skill operation. By removing ambiguity from acceptance testing, the gauge shortens inspection time and supports consistent throughput on the shop floor. Rapid integration into quality workflows As a traditional limit gauge, this item fits seamlessly into standard inspection routines and documentation. Its conformity with DIN 2245 facilitates direct use as an acceptance tool during final inspection or in‑process sampling, while the clear go/no‑go principle integrates easily with statistical process control points. The simple, binary result supports quick decision-making and reduces machine downtime caused by uncertain measurements. Durable materials and clear specification for procurement The use of gauge steel, hardened ensures long service life under normal usage, while the nominal size 42.0 mm and tolerance class H7 are stated explicitly for procurement and traceability. The compact specification aids stores and purchasing departments in stocking the correct reference item for routine checks, avoiding mismatches that lead to measurement disputes or production delays. The product’s SKU and standard reference support inventory management and documentation. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine limit plug gauge M314.042 into existing inspection routines and to confirm suitability for specific bore types Technical data Article number: M314.042 GTIN: 4054469121680 ECLASS: 21170218 Standard: DIN 2245 Facts Diameter: 42.0 mm Nominal tolerance: H7 Tariff number: 90173000 Special features Material: gauge steel, hardened Type: limit plug gauge (go/no‑go) Categories: Messstifte; Lehren FAQ What is this gauge intended for? The limit plug gauge is intended for quick acceptance checks of internal diameters; the Metav IndustryLine plug gauge M314.042 provides a go/no‑go indication for a 42.0 mm bore under DIN 2245/H7. How does the gauge indicate conformity? Conformity is shown by the go/no‑go principle: the go end should enter the bore if within tolerance and the no‑go end should not; the plug gauge M314.042 is produced to the H7 class for unambiguous acceptance checks. Is this instrument suitable for shop‑floor use? Yes; the hardened gauge‑steel construction and compact form make the gauge suitable for repetitive checks on the shop floor where rapid, repeatable assessment is required. Can this gauge be used for documentation in inspection reports? The gauge’s compliance with DIN 2245 and clear nominal/tolerance marking supports its use as a recorded reference in inspection documentation and process control charts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42 mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3 - Metav IndustryLine
Benefit from a hardened, lapped gauge steel construction and conformity to DIN 2250 / DIN 286 (JS 3) for reproducible settings; order the setting ring directly via Metav Werkzeuge or consult our specialists for matching gauges and inspection equipment. M313.042 Setting Ring (Ø 42 mm) – Form C, Hardened Gauge Steel | Metav IndustryLine M313.042 is a purpose-built setting ring for precision gauging and inspection tasks, designed to serve as a reliable master for measuring instruments and calibration workflows. Form C design for robust centring Hardened, lapped gauge steel finish Complies with DIN 2250 and DIN 286, JS 3 Nominal diameter Ø 42 mm Consistent calibration performance through standard conformity The ring is manufactured from hardened and lapped gauge steel, a choice that delivers both mechanical stability and a low-wear measuring face. Compliance with DIN 2250 and DIN 286 and the specified JS 3 tolerance class means the component functions as a dependable master for setting comparators, plug gauges and other inspection equipment. The standardised tolerance ensures interchangeability with other calibrated masters and supports traceable measurement routines in production and quality control. Robust geometry that aids repeatable measurement The Form C profile provides reliable centring and handling during routine use; combined with the lapped finish, this minimises local contact distortion and reduces the risk of measurement drift over time. The ring’s Ø 42 mm nominal diameter makes it suitable as a setting standard for instruments that require a mid-range reference size. The compact, symmetric design simplifies use in both bench metrology and shop-floor inspection, translating the material and finish choices into long-term dimensional stability. Practical application and procurement confidence Built for use in gauging, inspection and calibration tasks, this ring gauge is a practical master for workshops, toolrooms and small calibration labs where a durable reference standard is required. Supplied under the Metav IndustryLine brand, the product benefits from Metav’s supply chain and quality assurance approach—making high-precision measuring aids more accessible to industry. For buyers seeking dependable masters without sacrificing availability, the construction and conformity of this ring support efficient measurement workflows and reduced rework. Contact Metav Werkzeuge in Emmerich for tailored advice or to secure the Metav IndustryLine setting ring directly from our specialists (+49 2822 7131930) Technical Data Article number: M313.042 GTIN: 4054469120775 eClass: 21170104 Tariff number: 90173000 Brand: Metav IndustryLine Core technical figures Nominal diameter: 42 mm Tolerance class: JS 3 Standards: DIN 2250; DIN 286 Design & special features Material: gauge steel, hardened and lapped Form: Form C Application: setting / inspection ring gauge Finish: lapped measuring face FAQ What tolerance class does this setting ring meet? The M313.042 setting ring meets the JS 3 tolerance class in accordance with DIN 2250 and DIN 286, ensuring close manufacturing tolerances suitable for calibration tasks. Is the ring suitable as a master for caliper or comparator settings? Yes, the Metav IndustryLine M313.042 ring gauge is intended as a master reference for setting comparators, calipers and other measuring instruments thanks to its hardened, lapped measuring face. What material and surface finish are used on the ring? The ring is made from gauge steel, delivered hardened and lapped to provide wear resistance and a stable contact surface for reproducible measurements. Which applications are typical for this ring gauge? Typical uses include workshop inspection, setting of measuring instruments, and quality control where a mid-range reference diameter is required; the Ø 42 mm size is common for many calibration routines. How is traceability ensured for this product? Traceability is supported by standard conformity (DIN 2250 / DIN 286) and the product identifiers (GTIN and article number) supplied with the ring, facilitating documentation in calibration and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
44mm Limit Go Gauge, H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, DIN 2245 conformity and a precision 44.00 mm H7 diameter for reliable bore verification in production and inspection. Order the limit plug gauge directly via Metav Werkzeuge or request advice from our consultants for specification checks and rapid supply. Limit plug gauge M314.044 — 44.00 mm H7, DIN 2245 The limit plug gauge M314.044 is a hardened, precision plug for verifying bore diameters to H7 tolerance in production, quality control and toolroom environments. Hardened gauge steel construction Conforms to DIN 2245 with H7 tolerance Precision ground diameter 44.00 mm Traceable GTIN and SKU information Consistent measurement reliability for production control The plug is manufactured from hardened gauge steel, delivering wear resistance and long service life under frequent use. Its 44.00 mm H7 specification is processed by precision grinding to provide a reproducible reference for internal diameter checks, reducing the risk of false rejects and rework. By offering a stable, calibrated checking surface, the tool supports systematic quality routines and shortens inspection cycles, making dimensional control more efficient across batch production. Designed to meet standardised inspection workflows Manufactured to DIN 2245, the gauge fits standard acceptance criteria and integrates directly with common inspection procedures. The item is supplied with traceable identification via GTIN and SKU M314.044, enabling inventory control and audit documentation. The robust finish and tight tolerance control ensure the plug remains a dependable physical standard for incoming part checks, in‑process inspection and final acceptance tasks where compliance with specified fits is mandatory. Practical handling and fit verification explained As a limit plug gauge, the device checks whether a bore falls within the permitted H7 tolerance band: the gauge confirms the lower or upper limit depending on the design variant. The compact shape and straight profile make it quick to insert and remove, enabling fast verification without complex fixturing. For workshops upgrading their inspection routines, this gauge functions as a simple, tactile decision tool that complements measurement equipment such as telescoping gauges or internal micrometres and streamlines the go/no‑go assessment inherent to batch release processes. For traceable, workshop-ready limit gauges from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and assured delivery from stock. Technical data Article number: M314.044 GTIN: 4054469121697 SKU: M314.044 Norm: DIN 2245 Facts Diameter: 44.00 mm Tolerance class: H7 Tariff number: 90173000 Special features Material: gauge steel, hardened Application: bore diameter verification Brand: Metav IndustryLine FAQ What is the intended use of this gauge? The limit plug gauge M314.044 is intended for checking internal bore diameters against the H7 tolerance as part of production inspection and quality control. Is the gauge compliant with recognised standards? Yes, the gauge is manufactured to meet DIN 2245, ensuring compatibility with established inspection procedures. What material is used for the plug? The plug is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated use. How is the gauge identified for traceability? Identification is provided via GTIN 4054469121697 and SKU M314.044, supporting inventory and audit traceability. Which inspection tasks does this gauge complement? The plug is suitable for incoming inspection, in‑process checks and final acceptance where a tactile, standardised verification of bore size is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
44mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of a compact, standards‑matched gauge that combines hardened, lapped gauge steel with DIN conformity for repeatable set‑ups and reliable inspection masters. Order the component directly via Metav Werkzeuge or consult the team for application advice. Setting ring 44 mm — hardened gauge steel, DIN 2250 (Metav IndustryLine) The setting ring 44 mm provides a precision reference for calibration and dimensional verification in workshops and inspection labs, optimised for axial and cylindrical checks. Hardened, lapped gauge steel Conforms to DIN 2250 and DIN 286 Tolerance class JS 3 Form C for axial calibration Precision that reduces setup time and uncertainty As a compact reference, the setting ring 44 mm delivers a stable datum when aligning spindles, fixtures or bench instruments. The combination of hardened gauge steel and a lapped finish minimises surface variation, which in turn reduces measurement scatter and the need for repeated adjustments. For production environments where fixture changeovers are frequent, this leads to faster machine set‑ups and more consistent first‑piece acceptance rates, helping to keep throughput predictable. Standards compliance that supports traceable results Built to DIN 2250 and DIN 286 with tolerance JS 3, the ring gauge serves as a documented reference within a quality management system. The declared tolerance class indicates a narrow dimensional window, making the component suitable as a gauge master for routine checks and calibration benches. Compliance with these norms simplifies inclusion in inspection plans and supports traceability when logging measurement results for audits or process control. Durable geometry and practical workshop handling Form C geometry eases axial insertion and removal while maintaining a repeatable measurement face geometry; the lapped surface preserves form over many cycles and resists minor handling wear. The rugged construction suits everyday use in toolrooms and measuring departments where a compact, stable master is required for checking pin gauges, go/no‑go assemblies or for transferring size to production tooling. Integration into calibration routines is straightforward and supports a pragmatic approach to quality assurance. Choose the Metav IndustryLine setting ring 44 mm as a durable calibration master; contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to request availability or technical clarification Technical data Article number / SKU: M313.044 GTIN: 4054469120782 eClass: 21170104 Tariff number: 90173000 Facts Diameter: 44 mm Tolerance: JS 3 Standards: DIN 2250; DIN 286 Special features Material: gauge steel, hardened and lapped Form: C Category: Lehren / gauge rings FAQ What is the intended use of this setting ring? The setting ring 44 mm (Metav IndustryLine, SKU M313.044) is designed as a precision reference for calibration, fixture set‑up and dimensional checks on cylindrical components. Which standards does the ring meet? This ring gauge conforms to DIN 2250 and DIN 286; its tolerance is specified as JS 3, which supports inclusion in calibrated inspection routines. What material is used and how does it affect durability? Manufactured from hardened, lapped gauge steel, the ring offers a wear‑resistant measurement face that maintains form and reduces repeat‑measurement variability. Can this gauge be used as a master for routine checks? Yes — the design and tolerance class make it suitable as a workshop master for routine go/no‑go verifications and fixture alignment. Is the geometry suitable for axial and cylindrical checks? Form C geometry supports axial calibration and straightforward insertion, making the gauge practical for both axial and cylindrical measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Limit Go/No-Go Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
Conflicting product data detected: the item is indicated both as good and as rejected, so a reliable product description cannot be generated. This discrepancy in the product's status creates uncertainty, making it difficult to provide an accurate and trustworthy description. To resolve this issue, it is essential to clarify whether the item meets the required standards or has been deemed unsuitable. Without a clear determination, the conflicting data prevents the creation of a consistent and reliable product overview. Ensuring accurate and consistent product information is crucial for maintaining trust and transparency in the description process.
45mm Setting Ring Form C Hardened Gauge Steel DIN 2250, JS 3 - Metav IndustryLine
Take advantage of a hardened, lapped gauge finished to DIN 2250 with JS 3 tolerance for reproducible reference measurements; the Form C profile and compact 45 mm diameter ensure reliable setup and calibration in inspection and workshop workflows. Order the setting ring directly via Metav Werkzeuge or contact our consultants for application advice. Setting ring 45 mm — hardened, lapped gauge (Form C) by Metav IndustryLine The Setting ring 45 mm is a precision gauge ring designed for reference checks and setting tasks in inspection, assembly and workshop environments, offering a compact diameter with a standard Form C profile for straightforward seating and alignment. Hardened, lapped gauge steel Conforms to DIN 2250 and DIN 286 JS 3 Form C profile for standard reference fits SKU M313.045, GTIN 4054469120799 Reliable reference measurements with repeatable results A compact precision ring such as this provides a stable datum for setting instruments and verifying gauges. Manufactured from hardened, lapped gauge steel, the component resists wear and preserves contact geometry over many cycles, which reduces recalibration frequency and downtime. Compliance with DIN 2250 and DIN 286 and the JS 3 tolerance class offers a clear benchmark for traceable dimensional checks, helping maintain consistent quality across batches and shifts. Built for workshop integration and easy handling The small 45 mm diameter and Form C profile make the gauge easy to seat in common holders and fixtures, simplifying repetitive setup tasks. Its compact form supports quick manual handling during incoming inspection or final assembly checks, while the robust finishing minimises the impact of incidental knocks or grit in a production environment. This balance of stiffness and compactness is particularly useful where space is limited but measurement reliability remains critical. Practical benefits for quality assurance workflows Using a standardised reference ring streamlines procedures: the measurable compliance to recognised norms translates directly into fewer disputes over acceptance criteria and clearer documentation for audits. The ring functions as a stable master for comparator checks, functional gauge setting and routine verification, reducing operator uncertainty and supporting faster decision cycles on the shop floor. Why Metav IndustryLine gauges are chosen for industry use Metav IndustryLine supplies tools with an emphasis on consistent quality and accessible distribution; the compact gauge here matches that philosophy by offering standard-compliant performance without complex integration. The concise specification and traceable identifiers support purchasing and inventory processes, while the durable finishing ensures long service life under normal workshop use. For application advice or to order this Metav IndustryLine setting ring, contact Metav Werkzeuge for personalised consultation and fast delivery to your workbench. Technical data Article number: M313.045 GTIN: 4054469120799 Eclass: 21170104 Core data Diameter: 45 mm Standard: DIN 2250, DIN 286 Tolerance class: JS 3 Special features Material: gauge steel, hardened and lapped Profile: Form C Category: Gauges / Setting ring FAQ What tolerance class does the setting ring meet? The setting ring meets JS 3 tolerance and is manufactured according to DIN 2250 and DIN 286, providing a standardised reference for workshop measurements. Is the ring suitable as a master for gauge setting? Yes, as a hardened and lapped gauge it is intended for use as a reference master for gauge setting and comparator checks in routine inspection tasks. Which material is used for the ring? The ring is made from hardened, lapped gauge steel, chosen for wear resistance and long-term stability under normal shop-floor conditions. Can the ring be identified in inventory systems? Yes, the product is listed under SKU M313.045 and GTIN 4054469120799 for straightforward procurement and stock management. Which profile is provided and why does it matter? The ring has a Form C profile, which ensures a standard seating geometry compatible with common fixtures and holders, improving repeatability during setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Go/No-Go Plug Gauge H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Take advantage of DIN 2245 conformity and a hardened gauge‑steel construction for consistent go/no‑go checks; the 46.0 mm H7 tolerance ensures reliable bore verification. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge M314.046 (46.0 mm H7, DIN 2245) A Limit plug gauge M314.046 designed for quick Go/No‑Go verification of cylindrical bores in workshop and inspection environments DIN 2245 compliant precision gauge Hardened gauge steel for wear resistance H7 tolerance for standard bore inspection Compact design for quick gauge checks Repeatable Go/No‑Go inspection for production control The plug serves as a clear, objective reference for bore acceptance based on industry standards. Built to DIN 2245, the gauge provides a defined H7 limit that simplifies pass/fail decisions on the shop floor and in quality control stations. Using a dedicated limit gauge accelerates inspection cycles, reduces interpretation variance and supports traceable quality checks without the need for complex measurement devices. Durable construction that reduces downtime Manufactured from hardened gauge steel, the mandrel resists wear from frequent seating and repetitive checks, which prolongs service life and preserves dimensional integrity. The robust material choice minimises maintenance intervals and replacement costs while maintaining the gauge geometry required for reproducible contact. This results in fewer inspection failures caused by worn tools and improves overall process reliability. Practical fit for workshops and inspection benches The compact form factor and clearly defined tolerance class make the gauge suitable for inline checks and bench inspection alike. Its simple Go/No‑Go function requires minimal operator training and integrates easily into existing inspection routines, supporting faster throughput and fewer measurement bottlenecks. Documentation and standard compliance help with audit trails and support consistent production quality. Built for industry routines and traceability Delivered under the Metav IndustryLine label, the component supports standardised inspection processes in metalworking and mechanical workshops. Key attributes such as the 46.0 mm nominal size and H7 tolerance align with common engineering specifications, enabling straightforward substitution into jigs, fixtures and measurement plans. The clear specification aids calibration planning and equipment lists within quality management systems. Contact Metav Werkzeuge for tailored advice and to arrange supply of the Metav IndustryLine limit plug gauge M314.046 for your inspection workflow Technical data Article number: M314.046 GTIN: 4054469121710 Standard: DIN 2245 Facts Diameter: 46.0 mm Tolerance class: H7 eClass: 21170218 Tariff number: 90173000 Special features Material: gauge steel, hardened Category path: Messstifte; Lehren FAQ What is the intended use of this plug gauge? The limit plug gauge is intended for Go/No‑Go verification of cylindrical bores; the M314.046 from Metav IndustryLine provides a clear pass/fail check for standard H7 bores. Is the gauge suitable for frequent workshop use? Yes, the hardened gauge‑steel construction of the Metav IndustryLine plug gauge M314.046 is designed for repeated seating and routine shop inspections. Does the gauge comply with any standard? The tool conforms to DIN 2245, ensuring its dimensions and tolerance class match recognised engineering specifications for plug gauges. How is traceability provided for the gauge? Identification via the article number M314.046 and GTIN supports traceability in inventory and quality records; the specified standard (DIN 2245) assists with documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of DIN‑standard tolerancing (JS 3) combined with hardened, lapped gauge steel for a reliable reference in workshop and inspection tasks; order directly via Metav Werkzeuge or contact the consultants for specification support. Setting ring 46 mm – Gauge ring, DIN 2250, hardened & lapped (Metav IndustryLine) The Setting ring 46 mm (M313.046) is a Form C gauge ring designed for setting and verifying internal diameters to DIN 2250 standards in industrial measuring and inspection environments. DIN 2250 compliant, JS 3 tolerance Hardened and lapped gauge steel Form C geometry for consistent seating 46 mm nominal diameter Precise, standardised tolerancing that simplifies inspection The ring is produced to DIN 2250 and DIN 286 specifications with a JS 3 tolerance class, providing a predictable engineering fit close to the nominal value. This standardised tolerance reduces decision time in quality control and supports repeatable go/no‑go assessments. For inspection departments and shop‑floor calibration tasks, the standard conformity translates directly into fewer measurement disputes and faster approvals, as the tolerance class specifies the permissible deviation range for the 46 mm nominal diameter. Durable reference material for long service life Manufactured from hardened, lapped gauge steel, the ring offers excellent wear resistance and a stable reference surface that resists deformation under normal handling. The lapping process produces a fine contact finish, reducing surface irregularities that can introduce variation. As a result, the gauge retains its dimensional integrity over extended use, lowering the frequency of replacement and ensuring that setting tools and measurement instruments remain aligned to a consistent standard. Operator‑friendly profile for reliable seating and setting The Form C profile provides a consistent contact geometry that eases placement on shafts or in fixtures and helps achieve repeatable seating during checks. This design reduces operator influence on measurement outcomes and supports efficient set‑up of plug gauges, comparator fixtures or test benches. In practical terms, the geometry simplifies handling during repetitive tasks, contributing to faster cycle times in both calibration and production control workflows. Traceable identification and workshop integration The ring is supplied under the Metav IndustryLine label with traceable identification for inventory and process documentation. The compact diameter and robust construction make it suitable for both dedicated inspection benches and mobile tool kits used across multiple workstations. Combined with Metav’s supply chain reliability and product range, the gauge ring serves as a cost‑effective element in a broader metrology strategy that emphasises reproducibility and logistical ease. Contact Metav Werkzeuge today for ordering and expert advice on the Metav IndustryLine setting ring M313.046 and to ensure the right gauge strategy for your measurement chain Technical data Article number: M313.046 GTIN: 4054469120805 Manufacturer: Metav IndustryLine Facts Diameter: 46 mm Tolerance class: JS 3 eClass: 21170104 TARIC / Harmonised code: 90173000 Special features Material: gauge steel, hardened and lapped Standards: DIN 2250, DIN 286 Design: Form C profile Besonderheit: Form C FAQ What is the intended use of this setting ring? The setting ring is intended as a reference gauge for setting and verifying internal diameters in inspection and workshop environments; the Metav IndustryLine setting ring M313.046 is designed to support rapid, repeatable diameter checks. Which standards does the ring comply with? This ring is manufactured to comply with DIN 2250 and DIN 286, with a JS 3 tolerance class specified for close conformity to the nominal diameter. What material and surface finish does the gauge have? The ring is made from hardened, lapped gauge steel, providing a wear‑resistant and finely finished contact surface suitable for repeated use. Is the 46 mm gauge suitable for shop‑floor and laboratory use? Yes; the design and material make it appropriate for both routine shop‑floor checks and controlled inspection benches where a robust reference gauge is required. How is the product identified for inventory and traceability? The gauge is supplied with the manufacturer designation Metav IndustryLine and the article number M313.046 for clear traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47mm Limit Go Gauge, H7, Hardened Gauge Steel, DIN 2245 - Metav IndustryLine
Take advantage of the combination of DIN 2245 conformity and hardened gauge steel for reliable, repeatable bore checks; order the limit plug gauge directly via Metav Werkzeuge or consult their specialists for technical advice. Limit Plug Gauge M314.047 – 47.0 mm, DIN 2245 H7 (Metav IndustryLine) The Limit Plug Gauge M314.047 is a hardened gauge designed for rapid pass/fail verification of bore diameters in workshop and production environments, compliant with DIN 2245 and nominally sized for an H7 fit. Made from hardened gauge steel Conforms to DIN 2245 for standard inspection Precise 47.0 mm nominal diameter Fast, standards-compliant bore verification The instrument supports immediate, reliable assessment of hole acceptance by checking against the H7 tolerance band defined in DIN 2245. Intended as a limit plug gauge, it simplifies routine inspection to a binary result—pass or fail—thus reducing cycle time in quality control. This standardised approach minimises interpretation errors in shop-floor checks and aids consistent production decisions. Durability that keeps inspection costs down Constructed from hardened gauge steel, the gauge resists wear during repeated engagement with component bores, prolonging service life and maintaining measurement integrity. The robust material choice reduces the need for frequent replacements and ensures a stable datum for go/no‑go verification, which is particularly valuable in environments with high inspection throughput. Practical fit for workshop and inspection workflows Traceability and shop-floor integration are supported via the product identifiers supplied with the tool, enabling clear inventory and quality records. The gauge suits machine shops, toolrooms and inspection benches where dimensional conformity must be proven quickly and reproducibly. With industry-standard specification and durable construction, the gauge contributes to operational reliability and audit-ready measurement routines. For standards-driven bore checks, request the Metav IndustryLine limit plug gauge M314.047 from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for technical clarification and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M314.047 GTIN: 4054469121727 Norm: DIN 2245 Material: hardened gauge steel Nominal diameter: 47.0 mm Tolerance fit: H7 Tariff number: 90173000 Eclass: 21170218 Facts Nominal diameter: 47.0 mm Tolerance designation: H7 Standard: DIN 2245 GTIN for traceability: 4054469121727 Tariff code: 90173000 Special features Hardened gauge steel for wear resistance Designed for pass/fail bore inspection Category: gauges / gauge pins Suitable for workshop and production use FAQ What is the primary function of this gauge? The limit plug gauge M314.047 is used to perform quick go/no‑go checks on bore diameters, providing an immediate acceptance decision for H7 fits according to DIN 2245. Which materials and environments is the gauge designed for? Manufactured from hardened gauge steel, the Metav IndustryLine gauge is engineered for repeated use in typical workshop and production environments where wear resistance and dimensional stability are required. What does the H7 designation mean for inspection? H7 specifies the tolerance zone for the nominal bore size; the gauge checks whether a hole falls within that zone as defined by the DIN 2245 standard, enabling standardised acceptance criteria. Is this gauge traceable within an inspection system? Yes, the product is provided with a GTIN (4054469121727) and article number M314.047 to support inventory control and quality documentation. Which applications benefit most from this type of gauge? Applications include machine building, component manufacturing and toolroom inspections where rapid, repeatable verification of bore sizes to H7 is necessary. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
47mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS3 - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 2250 compliance and a compact 47 mm nominal diameter for a dependable master reference in small-part inspection and tool setting. Order the setting ring directly via Metav Werkzeuge or consult the specialists for matching gauges and traceability documentation. Setting ring 47 mm — hardened gauge steel, DIN 2250 (Metav IndustryLine) The Setting ring 47 mm is a compact, hardened reference ring for precise gauge and inspection work in workshops and quality labs Hardened, lapped gauge steel finish DIN 2250 / DIN 286 compliant, JS 3 tolerance 47 mm nominal diameter for ring-gauge use Solid construction, approx. 0.72 kg mass Absolute reference for quick gauge checks and tool set-up A compact ring gauge crafted from hardened gauge steel serves as a robust master reference for everyday inspection tasks and machine set-up. With a 47 mm nominal diameter and a lapped finish, this component offers stable contact geometry that reduces measurement scatter when compared with untreated surfaces. The use of standardised tolerances ensures repeatable comparison checks against plug gauges or bore standards, so process control routines become faster and more transparent. For production environments where small but critical diameters determine downstream quality, this ring provides a verifiable reference that supports consistent setup and reduced rework. Material choice and standard conformity for traceable results Constructed from hardened and lapped gauge steel, the ring complies with DIN 2250 and DIN 286 and is manufactured to JS 3 tolerance class. These specifications mean the component is intended to function as a calibrated reference rather than a loose inspection fitment: the combination of hardness and surface finishing resists wear and preserves the effective diameter over many cycles. The standards alignment simplifies documentation in quality systems and supports traceability of inspection results back to a recognised tolerance chain, which is essential for audit-ready measurement regimes. Form C geometry and handling advantages The Form C design provides a balanced contact profile for reliable seating in both hand inspection and fixture-mounted checks. At approximately 0.72 kg, the ring is heavy enough to remain stable during measurement yet compact for convenient handling and storage. The lapped internal surface reduces tipping and localised wear when used with contact probes or comparator anvils. For workshops that value ergonomic, repeatable procedures, the ring’s geometry shortens set-up time and reduces the influence of operator technique on short-range dimensional controls. Suitable applications and practical guidance This setting ring is intended for use as a master reference in calibration benches, incoming inspection, and machine tool set-up for small-diameter components. Typical applications include verifying broach bores, checking plug and ring gauge wear, and providing a quick reference during first-article inspection. For integration into a controlled process, record the ring’s identification (SKU M313.047) in the quality log and follow regular visual inspection and cleaning intervals to maintain accuracy. If the optimal match for a specific measuring routine is unclear, Metav’s specialists can advise on compatible gauges and documentation practices to ensure measurement reliability. For tailored advice on incorporating the Metav IndustryLine setting ring into a quality workflow, or to request a specification sheet, contact Metav Werkzeuge for precise product matching and delivery arrangements Technical data SKU: M313.047 GTIN: 4054469120812 ECLASS: 21170104 TARIC: 90173000 Facts Nominal diameter: 47 mm Mass: 0.72 kg Special features Material: hardened, lapped gauge steel Standards: DIN 2250; DIN 286; tolerance class JS 3 Design: Form C Category path: Gauges / Setting rings (Lehren) FAQ What tolerance class does the setting ring meet? The setting ring is manufactured to JS 3 tolerance and complies with DIN 2250 and DIN 286, providing a defined clearance class suitable for calibration and repeatable inspection routines. What material and surface quality are specified? Made from hardened, lapped gauge steel, the ring features a precision lapped finish that minimises wear and ensures stable contact geometry for comparative measurements. Is the 47 mm ring suitable as a master reference in production? Yes. The 47 mm nominal diameter and hardened construction make the component suitable as a master reference for small-diameter checks, quick set-up and routine comparator work. How should the ring be maintained to preserve accuracy? Keep the ring clean, dry and free from nicks; handle with care, avoid impacts, and store in a protective compartment when not in use. Regular visual checks after use will help preserve the lapped surface and dimensional integrity. Can the ring be used with probe-based comparators or manual gauge blocks? The ring’s lapped internal surface and Form C geometry are compatible with both tactile probe contacts and manual comparator setups; ensure contact fixtures are clean and matched to the ring’s diameter class. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
48 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, JS3 - Metav IndustryLine
Take advantage of precise mechanical reference, hardened and lapped gauge steel, and conformity to DIN standards for repeatable measurement checks; order directly via Metav Werkzeuge or contact our specialists for application advice. Setting ring M313.048 — 48 mm, Form C, hardened gauge steel (Metav IndustryLine) The Setting ring M313.048 is a precision ring gauge made to DIN 2250 in Form C, intended as a robust reference for diameter checks and setting tasks in workshop and inspection environments. Setting ring M313.048, Form C Diameter 48 mm, weight 0.6 kg Hardened and lapped gauge steel Tolerance JS 3 to DIN 2250 and DIN 286 Reliable reference for dimensional control A hardened ring gauge provides a stable master for routine checks and setting operations. The 48 mm diameter and JS 3 tolerance class mean the component serves as a tight reference for production or incoming inspection, helping to reduce measuring uncertainty. By offering a repeatable datum in a compact form, the ring simplifies adjustment of measuring instruments and fixtures and supports consistent quality control across production batches. Long-term stability through material and finish Manufactured from hardened and lapped gauge steel, the component resists wear and maintains form accuracy under typical workshop use. The lapped bore reduces surface roughness and ensures precise contact with shafts or pins, while the hardened substrate protects against deformation. Together these features extend service life and limit the need for frequent replacement, making the gauge a cost-effective element in any inspection toolkit. Standards compliance for traceable inspection Designed to the requirements of DIN 2250 and DIN 286, the ring gauge meets recognised German standards for gauging geometry and tolerancing. The conformity to these norms facilitates integration into existing quality systems and documentation practices. As a standardised master, the gauge aids traceability in measurement procedures and supports consistent acceptance criteria between suppliers and customers. Practical handling and workshop use The Form C design balances accessibility and seating stability, allowing straightforward engagement with shafts and fixtures in a production environment. At 0.6 kg the part is easy to handle without sacrificing rigidity, and the compact size suits toolrooms and bench applications where space and repeatability matter. The ring is appropriate as a setting master for comparative measurement and for verifying external diameters within the stated tolerance class. For application-specific guidance or to request dimensional certificates and availability from our Emmerich warehouse, contact Metav Werkzeuge — our specialists will advise on the best configuration for precision set-up tasks. Technical data Article number: M313.048 GTIN: 4054469120829 Label: Einstellring 48 mm, DIN 2250, hardened gauge steel Core data Diameter: 48 mm Weight: 0.6 kg Tolerance: JS 3 eClass: 21170104 Tariff number: 90173000 Special features Material: hardened and lapped gauge steel Norms: DIN 2250; DIN 286 Form: Form C Particulars: robust reference master for setting and checking FAQ What is the intended use of this ring gauge? The ring gauge serves as a precision reference for diameter checks and for setting measuring instruments; the M313.048 is intended for workshop and inspection use where a stable master is required. Which standards does the gauge comply with? This setting ring conforms to DIN 2250 and DIN 286 and is manufactured to the JS 3 tolerance class specified for the product. What material and finish are used for the gauge? The ring is made from hardened, lapped gauge steel, offering wear resistance and a smooth contact surface. Is this part suitable for everyday shop-floor use? Yes — the combination of hardness, lapping and the Form C design provides durability and easy handling for regular setting and checking tasks. How does the tolerance class affect measurement? The JS 3 class defines the permissible deviation for the diameter; it offers a close fit suitable for tight production tolerances and reliable comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
48 Sizes Thread Go/No-Go Plug Gauge Set 0.5–6 mm Pitch Metric & 3–48 TPI, 60° Profile, 3pcs/Size, Plastic Case
Take advantage of precise thread verification, a comprehensive 48-piece range with three pins per size, and a compact transport case for organised inspection routines — order the Thread Gauge Pin Set directly via Metav Werkzeuge or consult our advisors for specification support. Thread Gauge Pin Set M318.510 — 48-piece set for metric and inch thread pitch verification The Thread Gauge Pin Set M318.510 is designed for efficient workshop and inspection use, enabling rapid verification of metric and U.S. inch thread pitches in production and quality‑control environments. 48-piece set across 16 sizes Metric and imperial thread pitch coverage Accuracy ±0.004 mm Supplied in transport case Faster, traceable checks for mixed-thread production The set delivers repeatable, measurable results for both metric and imperial threads, covering thread pitches from 0.5–6 mm (metric, 60°) and 3–48 TPI (U.S., 60°). With a stated accuracy of ±0.004 mm, the pins allow clear go/no‑go decisions during incoming inspection and process control, reducing rework and assembly faults. Using dedicated gauge pins instead of improvised probes simplifies documentation and makes visual and tactile checks faster without sacrificing reliability. Organised, workshop-ready kit that reduces downtime Packed as a complete 48-piece set with three pins per size, the collection is arranged for quick selection and replacement during routine checks. Each pin is approximately 70 mm long and the full set weighs 0.4 kg, making it highly portable for shop‑floor use or inspection benches. Delivery in a transport case protects the gauges during handling and keeps sizes organised, which shortens search times and supports consistent measurement practice across shifts. Built to industrial expectations and simple to integrate Manufactured to factory standard (Werksnorm), the set is suitable for use alongside precision calipers and other inspection tools when verifying thread form and pitch. The range of diameters supplied accommodates both fine and coarse threads commonly found in mechanical assemblies, fittings and maintenance tasks. As a ready‑to‑use set, it supports standardised inspection procedures and contributes to traceability in quality records, helping to demonstrate compliance during audits. For reliable, workshop-friendly thread inspection choose the Metav IndustryLine Thread Gauge Pin Set M318.510 — contact Metav Werkzeuge in Emmerich for procurement and technical advice. Technical Data Article number: M318.510 GTIN: 4054469129112 Set contents: 48 pieces (16 sizes) Pieces per size: 3 Total weight: 0.4 kg Core measurements Length: 70 mm Accuracy: ±0.004 mm Thread pitch range: 0.5–6 mm (metric, 60°) Thread pitch range: 3–48 TPI (U.S., 60°) Diameters (mm / inch): 0.4572/0.018”, 0.6096/0.024”, 0.7366/0.029”, 0.8128/0.032”, 1.0160/0.040”, 1.1430/0.045”, 1.3970/0.055”, 1.6002/0.063”, 1.8288/0.072”, 2.0574/0.081”, 2.3368/0.092”, 2.7432/0.108”, 3.0480/0.120”, 3.2258/0.127”, 3.6322/0.143”, 4.6990/0.185” Special features Delivery in transport case for secure handling Standard: Werksnorm Category: Gauge pins / Thread gauges Application: Thread pitch verification FAQ What sizes and quantities are included in the set? The Thread Gauge Pin Set M318.510 contains 48 pieces in 16 sizes, with three pins supplied per size for repeat checks and redundancy. Which thread pitches can be verified with these pins? The gauges in this set cover metric pitches from 0.5–6 mm (60°) and U.S. inch threads from 3–48 TPI (60°), suitable for both fine and coarse applications. What accuracy can be expected during inspection? The Thread Gauge Pin Set M318.510 is specified with an accuracy of ±0.004 mm, providing reliable decisions for workshop and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
48mm Limit Go/No-Go Plug Gauge H7 Hardened Gauge Steel DIN 2245 1.6kg - Metav IndustryLine
Product data inconsistency detected: the supplied record contains conflicting mass values that prevent the creation of a reliable, production-ready product description. The item label indicates a mass of 0.88 kg, whereas the dedicated weight field lists 1.6 kg. This discrepancy affects technical accuracy for a precision gauging tool and must be resolved before a full specification and marketing text can be produced. Please verify the correct mass and any related entries (for example gross weight, packaging weight or unit specification) with the original data source and update the record. Once the authoritative value and any other inconsistent fields have been clarified, a complete British English product description with correct technical data, benefits and compliant formatting will be prepared.
4mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Taking advantage of Ø 4.00 mm sizing with a tight ±0.001 mm tolerance and a compact 50 mm length delivers repeatable end‑measure checks with workshop robustness; order the gauge pin directly via Metav Werkzeuge or contact our specialists for application advice. Gauge pin M323.400 — single precision gauge pin, Ø 4.00 mm ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge pin M323.400 is a single precision reference pin designed for end‑measure verification and fit testing in workshop metrology. Single precision gauge pin Ø 4.00 mm ±0.001 Length 50 mm for reliable end‑measure checks Made from special steel, workshop version Supplied in a protective transport box Consistent tolerances for dependable inspection results The core advantage of this gauge pin lies in its ±0.001 mm tolerance, which supports highly reproducible limit measurements and tight fit checks in small‑component production. Where control of final diameters and end‑faces matters, the fine tolerance reduces uncertainty in pass/fail decisions and shortens inspection cycles. The compact diameter supports micro‑scale verification tasks while maintaining high precision and repeatability. Robust workshop design that endures daily use Built as a workshop version from special steel, the pin combines a compact form with durable construction suited to routine handling and fixture use. The balanced mass and short length reduce the influence of wobble or deformation during insertion, so measurements remain stable over multiple cycles. This robustness means the pin is practical for bench inspection, small jig checks, and quick comparative tests in production areas. Compact dimensions and practical storage for busy shops With a 50 mm overall length and Ø 4.00 mm diameter, the gauge pin is easy to position in confined fixtures and to pack with other metrology tools. Supplied in a protective transport box, the item is protected against transit damage and contamination until use, streamlining storage and transport. Its small weight also simplifies handling when several reference pins are needed for a set of go/no‑go checks. Typical applications and compatibility in inspection workflows The pin is intended as a reference for end‑measure checks, plug‑fit verification and assembly trials where precise small diameters are critical. In fixture construction and quality control stations it functions as a dimensional standard for matching holes, seats and mating parts. Identification details (SKU M323.400) allow simple integration into inventory and traceability systems for consistent process documentation. For secure supply from our European quality hub and tailored advice on the Metav IndustryLine gauge pin, contact Metav Werkzeuge—direct assistance is available via Emmerich for prompt delivery and technical consultation. Technical data Article number: M323.400 GTIN: 4061905057137 SKU: M323.400 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 4,00mm, +/- 0.001 mm Länge 50 mm Key measurements Diameter: 4.00 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.007 kg Measurement range min/max: 4 mm / 4 mm Special features Workshop version Material: special steel Supplied in transport box Story trigger: end‑measure reference FAQ What tolerance can be expected from this gauge pin? The gauge pin offers a tolerance of ±0.001 mm, giving highly repeatable results for end‑measure and fit checks with the Metav IndustryLine gauge pin M323.400. Is the pin supplied with calibration documentation? The delivery does not state ISO 17025 calibration; the gauge pin is supplied in a protective transport box but does not include an ISO 17025 certificate by default. Which material is used for the gauge pin? The gauge pin is manufactured from special steel, specified for the Metav IndustryLine single precision gauge pin to provide workshop‑grade durability. Can this pin be used for plug and seat verification in fixtures? Yes, the 4.00 mm diameter and precise tolerance make the pin suitable as a reference for plug‑fit and seat verification in fixture and assembly checks. How does the compact length affect measurements? The 50 mm length keeps the pin rigid and easy to handle, reducing measurement variability in short‑reach inspection tasks and making it suitable for confined fixture applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5 mm Test Pin Set 101 Pc, 0.01 mm Graduation, With Pin Holder, Special Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop-ready 101-piece gauge pin set that combines fine 0.01 mm graduations with a measured accuracy of ±0.004 mm, ensuring consistent bore checks and reduced rework. Order the gauge pin set directly via Metav Werkzeuge or contact our consultants for technical advice. Gauge pin set – 4.01–5.00 mm range, 0.01 mm graduation (Metav IndustryLine) The Gauge pin set is a precision inspection kit designed for small-bore verification and plug-gauge tasks in machine shops and precision assembly environments. 101-piece gauge pin set Range 4.01–5.00 mm in 0.01 mm steps Hardened special steel pins Supplied with pin holder and protective case Reliable small-bore inspection for repeatable results This compact inspection kit delivers reliable repeatability for small-diameter bores by combining tight 0.01 mm increments with an instrument accuracy of ±0.004 mm. The fine stepping allows methodical narrowing-in during tolerance checks, which reduces the need for rework and streamlines quality control routines. The set is optimised for tasks where consistent results matter, such as pin fits, bushings and small hydraulic components, providing measurable time savings on batch inspections. Precision engineering and material benefits explained Pins are manufactured from special steel and heat-treated for wear resistance, offering a durable contact surface that maintains dimensional integrity under frequent use. The hardened finish reduces surface damage to mating parts and the holder's support minimises lateral play during measurement. For users less familiar with gauge terminology: the graduation indicates the step between adjacent pins, so a 0.01 mm increment means controlled, predictable adjustments when selecting the correct gauge for a tight tolerance. Practical workshop kit and handling advantages The kit includes a secure pin holder and is supplied in a protective case for safe transport and organised storage, keeping individual pins accessible and minimising handling errors. The compact format suits bench-top workflows and portable inspection routines, allowing fast selection and clear identification of pins. Designed for everyday use, the set supports a structured inspection process that increases throughput without compromising measurement quality. Applications and operational value Ideal for precision workshops, toolrooms and small-bore production lines, this set supports a wide range of verification tasks where micro-scale accuracy is required. Typical uses include gauging of bores in components, verification of dowel fits and measurement checks during assembly. The combination of close graduations and robust materials assures dependable performance in routine quality checks and small-series production. For specification confirmation or to arrange supply, contact Metav Werkzeuge for tailored ordering and advice on integrating this gauge pin solution into existing inspection workflows Technical data Article number: M318.574 GTIN: 4054469168289 Material: Special steel Accuracy: ±0.004 mm Graduation: 0.01 mm Core dimensions Measuring range: 4.01–5.00 mm Length: 50 mm Weight: 1.9 kg Tariff number: 90173000 Special features Supplied with pin holder Protective case for transport 101-piece set (labelled configuration) Hardened, wear-resistant finish FAQ What size range do the pins cover? The pins in this gauge pin set cover a range from 4.01 mm to 5.00 mm in 0.01 mm increments, suitable for small-bore inspection tasks. Is the set suitable for daily workshop use? Yes, the hardened special steel pins and the supplied pin holder make the set robust enough for daily verification and bench-top inspection routines. How precise are the measurements with this kit? Measurements can be made with an accuracy of approximately ±0.004 mm, allowing confident checks for fine tolerances. Does the set include storage for the pins? The kit is supplied in a protective case for safe transport and organised storage; a dedicated pin holder is also included for handling and measurement support. Can the set be used for hydraulic or pneumatic component inspection? Yes, the fine graduations and stable pin geometry are well suited to verifying bores and fits in small hydraulic and pneumatic components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4–5mm Gauge Pin Set, 21 Pieces, 70mm Length, 0.05mm Steps, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of a 0.05 mm graduation, a 4.00–5.00 mm diameter range and robust special-steel construction to standardise bore and fit checks with dependable repeatability; order or request application advice via Metav Werkzeuge for straightforward procurement and technical guidance. Metav IndustryLine Gauge pin set M318.824 — 4.00–5.00 mm, 0.05 mm graduation Gauge pin set by Metav IndustryLine for accurate fit, bore and plug measurements in inspection and production environments *0.05 mm graduation for fine tolerance checks *Diameter range 4.00–5.00 mm *70 mm pin length for deep bore access *Special-steel construction for durability Consistent measurement performance for routine inspection A compact set designed for precise incremental checks, the gauge pins provide a 0.05 mm step increment across the 4.00–5.00 mm range, permitting systematic narrowing of tolerances during setup and inspection. This fine gradation reduces trial‑and‑error, shortens cycle times and helps avoid costly rework by making deviation identification straightforward. The set is ideal where repeatable, small-step adjustments are required for gauging and standardisation tasks. Accessibility and durability where it matters With a 70 mm pin length, the pins reach into deeper bores and recesses with stability, enabling checks that shorter pins cannot accomplish. Constructed from special steel, the pins offer improved wear resistance for frequent use on production floors; this material choice balances surface hardness and resilience so that dimensional integrity remains stable through repeated measurements. The result is a toolset that supports a dependable inspection routine with minimal maintenance. Organised measurement for efficient workflows Supplied as a coherent set with clearly graded increments and compact handling characteristics, the collection of pins simplifies selection and comparison during quality checks. The 21 pins cover the stated diameter span in uniform steps, allowing technicians to work through fits and clearances without interrupting the process for additional tooling. Lightweight and straightforward to stow, the set promotes faster decision-making at the inspection bench while maintaining the precision expected in metalworking and assembly applications. For a reliable, production-ready gauge pin solution choose the Metav IndustryLine set — contact Metav Werkzeuge for tailored advice, availability details or a specification sheet at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M318.824 GTIN: 4054469181967 Manufacturer: Metav IndustryLine Facts Pin length: 70 mm Diameter range: 4.00–5.00 mm Graduation: 0.05 mm Pieces per set: 21 Weight: 0.85 kg Special features Material: Special steel Delivery form: Set Application: Bore, fit and plug measurement FAQ What tolerance increments are available in this set? The Metav IndustryLine gauge pin set is supplied in 0.05 mm increments across the 4.00–5.00 mm span, enabling fine adjustment and comparison during inspection. Can these pins be used for deep bore measurements? Yes. Each pin has a length of 70 mm, which facilitates checks inside deeper bores and recesses that shorter pins cannot reach. What material are the pins made from? The pins are manufactured from special steel, chosen to provide a balance of hardness and wear resistance suitable for frequent use in production environments. How is the set arranged for practical use? The pins are supplied as a coherent set covering the diameter range in uniform steps, which streamlines selection and sequential checking when verifying fits and clearances. What is the article number for reordering or reference? The set is listed under article number M318.824 and GTIN 4054469181967 for simple identification and reorder processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m 0.30 mm Precision Feeler Gauge Tape 12.7 mm Wide, Supplied in Case - Metav IndustryLine
Take advantage of a long continuous measuring strip with 0.30 mm thickness and a narrow 12.7 mm working width for reliable gap setting and clearance checks; combine this with industrial-grade repeatability to keep production tolerances tight. Order directly via Metav Werkzeuge or contact our consultants for specification support. Metav IndustryLine Precision Feeler Strip 0.30 mm × 5 m — 12.7 mm width Präzisions-Fühlerlehren, 0,30 mm x 5 m 12,7 mm Breite is a precision feeler strip designed for continuous gap and clearance measurement in workshops and precision engineering Precision 0.30 mm thickness Extended 5 m length for uninterrupted measuring Narrow 12.7 mm working width for tight gaps Accuracy ±0.05 mm for consistent repeatability Measure long runs without interrupting workflow The 5 m continuous strip format removes the need to piece together multiple shorter gauges when checking elongated components, saving setup time and reducing the risk of alignment errors. Built for repetitive use in assembly and inspection routines, the flexible strip keeps handling simple while offering a consistent reference thickness of 0.30 mm, so adjustments and clearances can be set and checked quickly. This format is especially practical where continuous or offset measurements are required across larger workpieces and jigs. Confident clearances through industrial-grade accuracy With a stated accuracy of ±0.05 mm, the feeler strip meets expectations for industrial metrology tasks that demand dependable tolerances. The narrow 12.7 mm width enables access to confined spaces and narrow gaps while maintaining surface contact for reliable readings. Explained simply: the lower the deviation figure, the smaller the measurement uncertainty — this strip provides the control needed for consistent fitment checks and quality-control sampling in production environments. Easy integration into workshop processes and inventory The strip is lightweight at 0.182 kg and compact to store, making it straightforward to include in tool sets, inspection benches or mobile measurement kits. Its continuous format supports repetitive processes and reduces downtime associated with changing gauges, which improves throughput. As part of an organised measuring routine, this tool contributes to faster, reproducible setting of parts and fixtures and complements digital or mechanical inspection equipment already in the workshop. For reliable gap setting with industrial consistency choose the Metav IndustryLine precision feeler strip—contact Metav Werkzeuge in Emmerich for detailed application advice and to discuss how this strip can be integrated into existing measurement workflows Technical Data Article number: M318.630 GTIN: 4054469129594 ECLASS: 21170212 Manufacturer: Metav IndustryLine Facts Length: 5 m (5000 mm) Thickness: 0.30 mm Width: 12.7 mm Accuracy: ±0.05 mm Weight: 0.182 kg Tariff number: 90173000 Special features Continuous feeler strip format Intended for gap and clearance measurement Compact and lightweight for workshop use Suitable for repetitive inspection tasks FAQ What thickness and width does the strip have? The Metav IndustryLine precision feeler strip has a thickness of 0.30 mm and a working width of 12.7 mm (SKU M318.630). Is the strip suitable for measuring long components? Yes, the continuous 5 m length is intended to enable uninterrupted measurements along elongated parts and assemblies. What measurement accuracy can be expected? The tool provides an accuracy of ±0.05 mm, suitable for standard industrial inspection and fitment checks. How is the strip best used in a production environment? Use the strip for repeated clearance and gap checks; its continuous format reduces changeover time and helps maintain consistent assembly tolerances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com