Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
5 m 0.60 mm Precision Feeler Gauge Strip 12.7 mm Wide, Supplied in Case - Metav IndustryLine
This precision strip supplies a stable, measurable reference for gap setting and inspection thanks to its consistent 0.60 mm thickness and an industrial accuracy of ±0.05 mm, while the continuous 5 m length enables custom cutting to size with minimal waste. Delivered in a protective transport box, this strip supports repeatable measurements and efficient workshop integration. Order the Precision Feeler Gauge Strip directly via Metav Werkzeuge or ask our consultants if needed. Precision Feeler Gauge Strip, 0.60 mm × 5 m — 12.7 mm width | Metav IndustryLine A Precision Feeler Gauge Strip designed for gap measurement, shimming and inspection across workshop, maintenance and production settings. Exact 0.60 mm thickness tolerance Continuous 5 m roll for custom lengths 12.7 mm strip width for narrow access Delivered in a protective transport box Precision that supports repeatable measurements The strip's defined 0.60 mm thickness and an indicated accuracy of ±0.05 mm create a reliable baseline for setting clearances and verifying component fits. Such reproducible dimensional reference reduces iterative rework and shortens setup times on jigs and fixtures; the measurable tolerance aligns with common industrial inspection routines and supports consistent pass/fail decisions in production. This stability is particularly useful where a fixed shim thickness is required for alignment or for establishing a quick visual standard during quality checks. A format designed for workshop efficiency Presented as a continuous 5 m roll with a practical 12.7 mm working width, the strip can be cut to the exact length needed for individual tasks, which minimises inventory variants and speeds up on-the-spot adjustments. The compact weight and packaging mean the item is transportable between workstations; the included protective transport box keeps the strip flat and reduces the risk of deformation during storage and transit. The roll format is therefore an economical, space-saving solution where bespoke lengths are preferred over fixed-size blades. Built for reliable integration into quality routines With traceable identification and robust construction for repetitive use, this strip supports standardised inspection workflows and simplifies documentation. The combination of continuous format and industrial accuracy makes it suitable for rapid shimming, clearance checks and temporary set-ups in maintenance and assembly operations. Backed by Metav's focus on accessible precision and dependable supply from Emmerich, the strip contributes to predictable throughput and a measurable reduction in non-conformances on the shop floor. For application advice, availability and delivery from Emmerich, contact Metav Werkzeuge for tailored guidance and prompt dispatch. Technical Data Article number: M318.660 GTIN: 4054469129655 ECLASS: 21170212 Tariff number: 90173000 Facts Thickness: 0.60 mm Width: 12.7 mm Length: 5,000 mm (5 m) Weight: 0.304 kg Accuracy: ±0.05 mm Special features Continuous 5 m strip for custom cut lengths Protective transport box included Category: Gauge strip for inspection and shimming Manufacturer: Metav IndustryLine FAQ What material is the strip made from? The product listing does not specify material composition; the Precision Feeler Gauge Strip (M318.660) is provided with the stated dimensions and performance data for workshop use. Is the strip suitable for precision shimming in production assembly? Yes. The Precision Feeler Gauge Strip’s defined 0.60 mm thickness and ±0.05 mm accuracy make it suitable for repeatable shimming and quick clearance setting in production environments. Can the roll be cut to short lengths for fine mechanical work? Yes. The continuous 5 m roll format allows custom cutting to the required length for bespoke applications or fine mechanical assembly tasks. Does this product come with transport packaging? The strip is delivered in a protective transport box to maintain flatness and protect the material during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m 0.90 mm Precision Feeler Gauge Tape 12.7 mm Width, Supplied in Case - Metav IndustryLine
Take advantage of the combination of industrial-grade accuracy, robust 0.9 mm thickness and a continuous 5 m length for reliable clearance checks across production workflows; order the Precision Feeler Gauge Strip directly via Metav Werkzeuge or consult our specialists for application advice. Precision Feeler Gauge Strip M318.690 — 0.90 mm thickness, 5 m continuous length (Metav IndustryLine) Precision Feeler Gauge Strip M318.690 provides a long, stable measuring medium for gap and clearance verification in inspection and workshop environments. 5 m continuous length for extended use 0.9 mm sturdy thickness for stable measurement ±0.05 mm industrial accuracy Supplied in protective transport case Faster inspections through repeatable precision The long, single-piece design of this precision feeler strip reduces repeated set‑up time and the risk of measurement variation that accompanies shorter, segmented gauges. With an indicated accuracy of ±0.05 mm, the strip is aligned with industrial tolerances for routine quality checks and production sampling; this level of precision supports consistent pass/fail decisions on machined parts and assemblies. The continuous length also minimises handling steps, so inspection throughput improves without sacrificing measurement reliability. Robust format for stable handling and longevity A 0.9 mm thickness combined with a 12.7 mm width gives the strip sufficient rigidity for guided insertion into gaps while remaining flexible enough for practical handling. The mechanical stability of the material reduces bending artefacts that can distort readings, translating into fewer re-measurements and a lower risk of scrap. Delivered in a protective transport case, the strip stays protected during storage and transit, preserving the working edge and physical condition essential for repeatable inspection tasks. Practical application across workshops and inspection benches This precision strip is intended for clearance, gap and feeler checks in metalworking, toolroom and general assembly operations where extended reach is beneficial. Typical uses include setting dies, checking bearing clearances, valve shims and aligning mating surfaces where a continuous measuring medium avoids the interruptions of short blades. The design and indicated accuracy make it suitable as a dependable workshop standard for routine verification, complementing other measuring equipment in a quality toolkit while keeping procedures efficient and straightforward. Request a technical consultation from Metav Werkzeuge to confirm suitability of the 5 m Precision Feeler Gauge Strip M318.690 for specific applications — Metav Werkzeuge is available to advise by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M318.690 GTIN: 4054469129716 Tariff number: 90173000 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.9 mm Weight: 0.546 kg Nominal accuracy: 0.05 mm Special features Supplied in protective transport case Category: Gauges / Measuring pins (Lehren / Messstifte) eClass: 21170212 Label: Precision feeler gauge strip, 0.90 mm x 5 m 12.7 mm width FAQ What is this product used for? The Precision Feeler Gauge Strip M318.690 by Metav IndustryLine is designed for gap and clearance checks, setting shims and quick verification tasks on assemblies and machined parts. What accuracy can be expected from the strip? The strip is specified with an accuracy of ±0.05 mm, suitable for industrial quality control and routine inspection tasks. What are the key dimensions of the strip? The product measures 5 m in continuous length, 12.7 mm in width and 0.9 mm in thickness, offering a balance of reach and rigidity for practical measurement. Is the strip delivered ready for storage and transport? Yes, the strip is supplied in a protective transport case to preserve its condition during storage and movement. Which workshop tasks suit this strip best? Typical applications include die setting, bearing clearance checks, valve shim adjustments and general gap verification where a long, continuous feeler medium improves workflow. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauge 0.04 mm Thickness 12.7 mm Width, Supplied in Case - Metav IndustryLine
Take advantage of the 0.04 mm thickness, a continuous 5 m length and the practical 12.7 mm width to supply precise gap setting and calibration tasks across large components; order the strip directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler gauge strip M318.604 — continuous 0.04 mm × 5 m, 12.7 mm wide (Metav IndustryLine) The Precision feeler gauge strip M318.604 is a continuous measuring strip designed for setting and checking clearances, tolerances and gaps in maintenance, assembly and quality‑control operations across workshop and production environments. Continuous 5 m length for extended reach Precise 0.04 mm thickness for fine gaps 12.7 mm width for stable handling Supplied in protective transport case Extended reach that reduces stock and saves time A continuous 5 m strip replaces multiple individual blades and reduces the number of separate thicknesses kept in stock. The rolled format allows cutting or trimming to the exact length required, which accelerates setup and maintenance tasks on large components such as housings, flanges and segmented assemblies. The combination of a narrow cross‑section and generous length provides access to confined joints while offering the practicality of a single, long measuring element. This reduces handling time and simplifies inventory management without compromising the ability to achieve fine adjustments. Repeatable results through defined thickness and tolerance Manufactured with a nominal thickness of 0.04 mm and a stated tolerance of 0.05 mm, the strip is intended for fine clearance work and comparative checks where consistent material thickness is essential. The 12.7 mm width enhances stability during insertion between mating parts, making measurements less prone to bending or twist. For routine gap setting and quick conformity checks, this format delivers predictable behaviour: once trimmed to size, the strip remains a reliable reference for repeatable adjustments and straightforward pass/fail assessments in workshop quality routines. Practical handling, transport and workshop integration Lightweight and compact when rolled, the strip is supplied in a protective transport case to prevent damage during storage and transit. The low mass facilitates easy two‑handed positioning or trimming at the bench; the strip’s dimensions also suit simple clamping or fixture use when temporary support is required. As part of a wider Metav IndustryLine offering, the product benefits from central European stock and quality control, providing confidence in supply continuity for industrial and trade customers alike. Contact Metav Werkzeuge today on +49 2822 7131930 or info@metav-werkzeuge.com to discuss how the Metav IndustryLine precision feeler gauge strip M318.604 fits specific applications and delivery from our Emmerich stock Technical data Article number: M318.604 GTIN: 4054469129464 HS code: 90173000 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.04 mm Tolerance/accuracy: 0.05 mm Weight: 0.056 kg Special features Continuous strip format for custom lengths Supplied in protective transport case for transport Category: Gauges / Measuring devices FAQ What applications suit this continuous feeler strip? The Precision feeler gauge strip M318.604 is suitable for gap setting, clearance checks and comparative tolerance verification in assembly, maintenance and workshop quality control tasks. Can the strip be shortened to length on site? Yes; the continuous 5 m format is designed to be cut to the required length, after which the trimmed strip remains usable for repeated gap measurements. How stable is the strip during insertion between components? With a 12.7 mm width the strip offers improved stability and resistance to twist compared with very narrow tapes, aiding reproducible insertion and measurement. Is the product delivered protected for transport? Delivery includes a protective transport case, ensuring the strip arrives in undamaged, ready‑to‑use condition. Who supplies and stocks this product in Europe? The item is part of the Metav IndustryLine range and is supplied from Metav’s European stock; the Precision feeler gauge strip M318.604 benefits from Metav’s quality‑control and logistics services. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauge 0.06 mm Thickness 12.7 mm Width Supplied In Case - Metav IndustryLine
Take advantage of the combination of high repeatability, extra-long reach and a stable 12.7 mm contact width for reliable gap and thickness checks on large components; order the precision feeler strip directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler strip M318.606 — Extra-long strip, 0.06 mm thickness, Metav IndustryLine The Precision feeler strip M318.606 is a flexible measuring strip designed for gap, thickness and clearance testing in heavy-duty workshops, toolrooms and component inspection. Precision tolerance ±0.05 mm Extra-long 5 m measuring range Delivered in protective transport case Reliable measurements across large components The extra-long measuring range of 5 m places this strip in the Extra‑Long class for gauges, making it suitable where extended reach is required for shafts, large housings and pipe fixtures. The combination of a narrow 0.06 mm thickness and a 12.7 mm width provides a predictable contact surface that reduces edge tilt and improves engagement in narrow gaps. For production environments this means fewer repositioning steps and a more efficient measurement routine when working on oversized assemblies. Industrial-grade repeatability and practical precision Built to an industrial standard accuracy of 0.05 mm, the strip gives repeatable results for comparative checks and setup tasks. The modest thickness offers tactile feedback during insertion while the wider blade area maintains alignment in axial measurements; both properties contribute to consistent readings and straightforward go/no-go assessment. In process control and workshop setup, the clear numeric tolerances support rational decisions and reduce rework related to unclear fits. Protected handling and workshop convenience Weighing just 0.064 kg, the strip is easy to manoeuvre even over long runs and, for protection during transport, arrives in a protective transport case. The case is designed for safe delivery and on-site handling; for larger tools, such transport boxes primarily serve to prevent transit damage rather than long-term storage. The lightweight nature combined with the transport packaging reduces handling fatigue and helps maintain the blade condition between uses. Fit for heavy-duty toolrooms and inspection benches As part of the Metav IndustryLine range, this strip merges pragmatic workshop design with accessible precision. The robust reach and defined 0.05 mm tolerance make it a practical tool for alignment tasks, clearance verification and assembly checks where conventional short gauges fall short. The construction suits repetitive use in metalworking and fabrication settings, supporting streamlined setups and dependable checks across a variety of large-format parts. Contact Metav Werkzeuge for tailored advice on the M318.606 precision feeler strip and for delivery from Emmerich — telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M318.606 GTIN: 4054469129488 Tariff number: 90173000 Core specifications Length: 5,000 mm Thickness: 0.06 mm Width: 12.7 mm Accuracy: 0.05 mm Weight: 0.064 kg eClass: 21170212 Special features Delivered in protective transport case Classification: Extra‑Long measuring range (2,000–5,000 mm) Intended for gap, thickness and clearance checks Lightweight for extended handling FAQ What is the measuring range of the strip? The measuring range is 5,000 mm, classifying it as an Extra‑Long gauge suited to long components such as shafts, pipes and large housings. What precision and tolerance does the M318.606 offer? The M318.606 precision feeler strip is specified with an accuracy of 0.05 mm, combining fine thickness with a stable contact width for repeatable comparative measurements. Is a calibration certificate included with this product? No calibration certificate is specified for this item. For traceable calibration options and certificates, Metav Werkzeuge can provide advice and services. How is the strip delivered and protected in transit? The strip is supplied in a protective transport case to prevent transit damage; for larger tools such boxes are intended primarily for transport protection rather than permanent storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauge 0.10 mm x 12.7 mm Wide, Supplied in Case - Metav IndustryLine
Take advantage of the combination of long‑run measurement capability, consistent 0.10 mm thickness and industrial ±0.05 mm accuracy for dependable gap and clearance checks across extended assemblies; order the strip directly via Metav Werkzeuge or consult the team for application advice. Precision feeler strip – 0.10 mm thickness, 5 m length (Metav IndustryLine) The precision feeler strip is a continuous thickness gauge designed for extended measurement tasks where consistent shim thickness and stable handling matter, suitable for workshop and production environments. 0.10 mm thickness for fine calibration 5 m continuous length for long measurements 12.7 mm width for stable handling Reliable measurements across long runs A continuous gauge of 0.10 mm nominal thickness provides a straightforward reference for clearance and shim checks over long components. The strip’s declared accuracy of 0.05 mm positions it within industrial tolerances for comparative measurement tasks, enabling repeatable results when checking gaps, verifying alignment or setting up fixtures. Because the material is supplied as a continuous length of 5 m, handling of larger workpieces is simplified: no repeated splicing of individual leaves is required, which reduces cumulative error and speeds up inspection cycles. This practical design translates into measurable time savings in recurring production checks. Practical handling and workshop benefits With a width of 12.7 mm, the gauge balances stiffness and flexibility for confident insertion into narrow gaps while remaining easy to guide between mating parts. The low mass (approximately 0.086 kg) and narrow cross‑section make the strip simple to manoeuvre in confined areas and around complex geometries. For workshop personnel, this means quicker set‑up and fewer interruptions during adjustment tasks; for production planners, it means a reliable tool that supports process stability. The combination of continuous length and uniform thickness reduces the need for multiple small feeler leaves, consolidating inventory and simplifying tool management. Typical applications and quality rationale Engineered for use in maintenance, assembly and quality control, the strip is suitable for gap assessment, shim selection, and comparative thickness checks on components in metalworking and general engineering. Its industrial ±0.05 mm characteristic makes it appropriate where tolerance grading is required but where ultra‑micro laboratory resolution is not necessary. The product supports rational workflow improvements: faster inspection, fewer part reworks and clearer documentation of measured clearances. Backed by the Metav IndustryLine range, the strip contributes to consistent measurement standards across the workshop and helps maintain a transparent quality chain. Choose the Metav IndustryLine precision feeler strip for consistent long‑run thickness checks and contact Metav Werkzeuge for tailored supply and technical guidance. Technical data Article number: M318.610 GTIN: 4054469129525 ECLASS: 21170212 Brand: Metav IndustryLine Facts Thickness: 0.10 mm Width: 12.7 mm Length: 5,000 mm Accuracy/tolerance: 0.05 mm Weight: 0.086 kg Tariff number: 90173000 Special features Continuous metal strip for thickness and gap comparison Industrial tolerance suitable for workshop QC Compact cross‑section for narrow gap access Lightweight for easy handling and transport FAQ What is this strip used for? The precision feeler strip is intended for gap and clearance checks, shim selection and comparative thickness measurements across longer components. What tolerance and thickness does the product offer? This Metav IndustryLine strip is specified at 0.10 mm thickness with an industrial accuracy of 0.05 mm. Is the length suitable for large assemblies? Yes; the continuous 5 m length supports measurements and adjustments over extended workpieces without joining multiple leaves. Which industry environments benefit most from this strip? Maintenance workshops, assembly lines and production inspection stations that require consistent comparative measurements and quick gap verification benefit most. Can this strip replace a set of individual feeler leaves? For many long‑run or repetitive tasks the continuous strip can consolidate multiple leaves, simplifying inventory and improving workflow efficiency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauge Strip 0.20 mm × 12.7 mm Width, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.20 mm thickness, 12.7 mm strip width and 5 m continuous length for consistent gap setting and efficient repeated measurements; order via Metav Werkzeuge or request advice from our consultants. Precision feeler strip M318.620 — 0.20 mm thickness, 5 m continuous length (Metav IndustryLine) The precision feeler strip M318.620 is a long, narrow gauge for accurate gap setting and comparative measurement tasks in workshop and metrology environments. 0.20 mm thickness for fine gap setting 12.7 mm strip width for stable handling 5 m continuous length for long runs Accuracy ±0.05 mm for reliable checks Consistent, measurable precision for repetitive tasks Built for tasks that demand repeatable results, this feeler strip combines a defined 0.20 mm nominal thickness with a declared ±0.05 mm accuracy to reduce rework and inspection time. The 12.7 mm nominal width keeps the strip flat and easier to control during insertion, while the continuous length removes the need for frequent repositioning when checking multiple points along long assemblies. Presented as a straightforward, measurable tool, it supplies a quantifiable baseline for quality control workflows and reduces ambiguity during pass/fail checks. Practical benefits on the shop floor and in quality control The long format is especially useful where a single continuous gauge speeds up production tasks such as setting clearances, checking running fits or comparing mating parts over extended lengths. By using a standardised thickness and stable strip width, the solution improves repeatability and supports faster decision-making in assembly and inspection. Integration into existing measuring routines is uncomplicated: the strip provides immediate tactile feedback for gap setting, enabling technicians to keep cycle times low without compromising accuracy. Procurement-ready data and traceability for industrial buyers Designed for procurement and workshop inventory, the item is listed under common industrial classifications and identified by SKU and GTIN for straightforward ordering and traceability. The clear technical identifiers support audit trails and part recording in ERP systems. Backed by Metav’s position as a precision partner, the strip is presented as a pragmatic tool for shops seeking dependable, easy-to-use gauges that align with routine production and inspection standards. For dependable long-run gap setting and standardised checks, contact Metav Werkzeuge to discuss the M318.620 precision feeler strip and arrange purchase or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M318.620 GTIN: 4054469129570 ECLASS: 21170212 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Thickness: 0.20 mm Width: 12.7 mm Length: 5 m (5000 mm) Accuracy: ±0.05 mm Weight: 0.13 kg Special features Continuous precision strip for gap measurement Nominal width for improved handling and stability Category: Gauges / Measuring pins FAQ What applications suit this precision strip? The M318.620 precision feeler strip is suitable for gap setting, clearance checks and comparative gauging in workshop, production and metrology environments. How precise is the strip for routine quality checks? The strip has a nominal thickness of 0.20 mm with an accuracy of ±0.05 mm, making it suitable for reliable visual and tactile checks during production control. Is the item identifiable for procurement and inventory systems? Yes. The product is supplied with SKU M318.620 and GTIN 4054469129570 to support ordering, stock control and traceability. Can this strip be used across different assembly processes? The continuous 5 m length and 12.7 mm width make the strip practical for repeated checks along extended components, improving workflow efficiency in assembly and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauges 0.07 mm Thickness 12.7 mm Width, Supplied in Case - Metav IndustryLine
Consistent 0.07 mm thickness combined with a 5 m continuous length and a narrow 12.7 mm width enables precise gap setting, reduced waste and access into tight clearances; the strip is supplied ready for transport in a protective box — order the precision feeler strip directly from Metav Werkzeuge or contact our consultants for specification advice. Precision feeler strip, 0.07 mm × 5 m, 12.7 mm width — Metav IndustryLine Precision feeler strip, 0.07 mm × 5 m, 12.7 mm is a continuous shim tape for gap measurement, shimming and calibration in workshops and inspection laboratories. Uniform 0.07 mm thickness 5 m continuous roll for long runs 12.7 mm narrow strip for tight gaps Precise, repeatable thickness for measurement and setting The roll format offers a continuous supply of 0.07 mm shim material, producing a reliably uniform thickness across repeats. This precision format reduces the need for multiple single-use blades and supports faster set-up times in production and maintenance. The nominal accuracy 0.05 mm gives a clear technical reference for routine tasks, allowing planners to evaluate tolerances and stack shims purposefully to reach required clearances with fewer intermediate checks. Practical handling that saves time on the shop floor The narrow 12.7 mm strip design is intended to reach into confined joints and narrow valve clearances where wider shim tapes cannot fit. Supplied as a continuous roll, the material can be cut to length on demand, reducing inventory of discrete sizes and lowering material wastage. For transport and site handling the product is delivered in a protective transport box, ensuring the strip remains flat and free from kinks until use and supporting consistent measurement behaviour in subsequent applications. Clear applications and workshop benefits Ideal for mechanical fit‑up, adjustment of bearings, valve lash shimming and calibration tasks, the strip acts as a low‑profile shim and feeler aid that integrates with standard inspection procedures. The combination of consistent thickness and roll length improves process efficiency in repetitive tasks, while the compact roll format simplifies storage. Specified as part of the Metav IndustryLine range, the item suits workshop environments that require straightforward, dependable gauging and shimming tools. For tailored technical guidance or to secure a Metav IndustryLine precision feeler strip with its continuous 5 m format, contact Metav Werkzeuge in Emmerich for ordering and specification support. Technical data Article number: M318.607 GTIN: 4054469129495 Manufacturer: Metav IndustryLine Eclass: 21170212 Core specifications Thickness: 0.07 mm Width: 12.7 mm Length: 5,000 mm Accuracy: 0.05 mm Weight: 0.068 kg Features & delivery Continuous roll format Narrow-strip design for narrow clearances Delivered in a protective plastic or wooden transport box Tariff number: 90173000 FAQ What is the nominal thickness and tolerance of the strip? The precision feeler strip has a nominal thickness of 0.07 mm with an indicated accuracy of 0.05 mm; the Metav IndustryLine item (SKU M318.607) is specified for repeatable gap-setting tasks. How is the product supplied and protected? The strip is supplied as a 5 m continuous roll, 12.7 mm wide, and is packed in a protective transport box to keep the material flat and ready for immediate use. Can the strip be used for shimming and valve adjustment? Yes — the narrow width and consistent thickness make the strip suitable for shimming, valve lash adjustment and other fine gap settings in workshops and inspection labs. Is the roll easy to cut and apply on site? The continuous roll format allows cutting to the exact length required, reducing waste and enabling quick on‑site application for bespoke shimming needs. How should the strip be stored to preserve accuracy? Store the roll flat in its transport box, avoid sharp bends and minimise exposure to humidity or corrosive environments to preserve dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauges 0.09 mm Thickness 12.7 mm Width, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 0.09 mm thickness, a 5 m continuous roll and ±0.05 mm industrial accuracy for reproducible gap setting and calibration tasks; order the strip directly via Metav Werkzeuge or consult our advisers for application advice. Precision feeler strip, 0.09 mm × 5 m (12.7 mm wide) — Metav IndustryLine A precision feeler strip designed for reliable gap measurement and thickness calibration in workshop and production environments. 0.09 mm thickness for fine adjustment 5 m continuous roll for long runs 12.7 mm narrow profile for confined gaps High accuracy ±0.05 mm industrial grade Precise, continuous material for consistent results The continuous 5 m roll provides a seamless solution where multiple or extended measurements are required. Produced to a nominal thickness of 0.09 mm, the strip enables consistent shim and feeler applications without disruptive joints or overlaps. The continuous format reduces preparation time on the shop floor and supports repetitive processes in maintenance and assembly, improving throughput and lowering rework rates. The narrow profile also helps when working in restricted access areas or on fine mechanical assemblies. Industrial accuracy that supports quality control Specified with an accuracy of ±0.05 mm, this strip meets industrial tolerances for general workshop and machine‑shop tasks. The tolerance class places the product in the reliable range for many quality‑control and setup activities, where repeatable dimensional checks are required. The material and manufacturing control reduce variability between sections of the roll, so measurements and adjustments can be documented and reproduced as part of standard operating procedures or incoming inspection routines. Practical design for everyday workshop use At 12.7 mm width, the strip balances handling and accessibility: narrow enough to enter tight gaps, yet wide enough for stable contact during feeler and shim operations. The low mass (approx. 0.076 kg) and flexible format make the strip easy to store and deploy on the bench or in a tool kit. Delivery in a protective transport case ensures the material reaches the workplace free from kinks or contamination, preserving surface quality and measurement reliability over time. Applications and efficiency gains The strip is suitable for a wide range of applications where thin, accurate shims or gap gauges are required — from valve and pump set‑up to press tooling and fine fixture alignment. Using a continuous roll reduces the need for multiple individual blades, cutting inventory complexity and enabling faster on‑site adjustments. For process managers looking to standardise procedures, the roll format supports batch handling and traceable usage across jobs, contributing to predictable cycle times and fewer stoppages. Contact Metav Werkzeuge today to discuss how the Precision feeler strip can streamline setup and inspection tasks in your facility and for assistance with ordering or technical specifications Technical data Article number: M318.609 GTIN: 4054469129518 ECLASS: 21170212 Tariff number: 90173000 Facts Width: 12.7 mm Thickness: 0.09 mm Length: 5,000 mm Weight: 0.076 kg Accuracy: ±0.05 mm Materials & special features Continuous roll format Narrow profile for confined gaps Delivered in protective transport case Categories: gauges, measuring pins FAQ What is the best use for this precision feeler strip? The precision feeler strip is intended for gap measurement, shim replacement and thickness checks in workshops and production lines, where a continuous 5 m roll and 0.09 mm thickness speed up repetitive adjustment tasks. Is the strip suitable for confined or narrow gaps? Yes, the 12.7 mm width and thin 0.09 mm section make the strip well suited to confined access points and narrow clearances in mechanical assemblies. How consistent is the thickness along the roll? Manufactured to an industrial tolerance of ±0.05 mm, the strip offers reproducible thickness across its length for reliable setup and inspection documentation. Does the product come ready for storage and transport? The strip is supplied in a protective transport case to prevent kinks and contamination, ensuring the material reaches the bench in serviceable condition. Which brand and SKU should be referenced when ordering? Order using the Metav IndustryLine designation and SKU M318.609 to ensure the correct 0.09 mm × 5 m, 12.7 mm feeler strip is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m Precision Feeler Gauges 0.35 mm Thickness 12.7 mm Width, Supplied In Case - Metav IndustryLine
Take advantage of the combination of reliable repeatability, extended measuring length and workshop-friendly handling to streamline gap inspection and maintenance processes. Order the product directly via Metav Werkzeuge or contact our consultants for application advice. Precision feeler strip M318.635 — 0.35 mm thickness, 5 m length (Metav IndustryLine) A precision feeler strip designed for continuous gap and clearance measurement in metrology, maintenance and assembly applications. 0.35 mm thickness for clear gap definition 5 m continuous length for extended reach 12.7 mm blade width for stable handling Industrial-grade precision with 0.05 mm accuracy Consistent, repeatable measurements for quality control The continuous metal strip delivers consistent thickness across its full length, making it a reliable reference for inspection and setup tasks. With a nominal thickness of 0.35 mm and an industrial accuracy rated at ±0.05 mm, the strip supports routine tolerance checks and quick go/no-go assessments without complex fixtures. This stable specification reduces rework and inspection time because the same blade can be used for repeated measurements along a production line, improving throughput and process reliability. Practical handling that suits workshop workflows A blade width of 12.7 mm offers sufficient surface area for secure, controlled positioning while the 5 m length provides reach for larger assemblies and extended measurements that would otherwise require multiple smaller gauges. The overall weight of approximately 0.212 kg keeps the strip portable for bench use or mobile inspection tasks, while the continuous format removes the need to join smaller pieces and thus minimises alignment errors. These characteristics make the strip particularly useful for maintenance, alignment and on‑site adjustment jobs where ease of use and reproducible results matter. Proven supply and support from an experienced metrology partner Sourcing measuring tools from a specialist reduces procurement complexity and increases confidence in repeat deliveries. Metav IndustryLine combines a broad product range with central warehousing in Emmerich, supplying calibrated, workshop-ready items and dependable logistics for industrial customers and trade. Choosing this feeler strip supports a pragmatic workflow: one durable reference for extended gap checks that integrates with existing quality procedures and helps maintain consistent measurement standards across teams. Contact Metav Werkzeuge for stock information, availability of technical datasheets and advice on integrating the Metav IndustryLine precision feeler strip M318.635 into existing inspection routines Technical data SKU: M318.635 GTIN: 4054469129600 Manufacturer: Metav IndustryLine Tariff number: 90173000 Measurements Thickness: 0.35 mm Length: 5 m Width: 12.7 mm Weight: 0.212 kg Accuracy: ±0.05 mm Features & applications Category: Gauges / Feeler gauges Continuous strip design for extended measurements Suitable for workshop maintenance and calibration tasks FAQ What is the primary use of this feeler strip? The feeler strip is intended for gap and clearance measurement in workshop and maintenance settings; the continuous format suits larger assemblies and extended checks. How precise is the measurement capability of the strip? The strip offers a nominal thickness of 0.35 mm with an accuracy of ±0.05 mm, making it suitable for standard industrial inspection and alignment tasks. Can the strip be used for on‑site alignment of assemblies? Yes, the 5 m continuous length and 12.7 mm blade width facilitate on‑site alignment and adjustment of larger components where multiple short blades would be impractical. Is the product traceable by GTIN or SKU? Yes, the item is listed under SKU M318.635 and GTIN 4054469129600 for procurement and inventory purposes. Which types of workshops benefit most from this strip? Machine shops, maintenance teams and assembly lines benefit from the strip’s extended reach and repeatable thickness, especially when frequent gap checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m x 0.85 mm Precision Feeler Gauge Strip 12.7 mm Width, Case Included - Metav IndustryLine
Take advantage of a long-format, high-precision shim that combines consistent thickness, measurable tolerance and time-saving handling for smoother assembly and calibration workflows. Order directly via Metav Werkzeuge for reliable European delivery or contact our consultants for technical advice. Precision feeler strip M318.685 — 0.85 mm thickness, 5 m length (Metav IndustryLine) The Precision feeler strip M318.685 is a long-format, narrow shim tape designed for gap setting, shimming and precision clearance adjustments across industrial assembly, plant maintenance and toolmaking applications. 0.85 mm thickness for defined clearances 5 m continuous length for custom shims 12.7 mm working width for confined joints ±0.05 mm tolerance for reproducible results Consistent thickness for reliable gap control The 0.85 mm nominal thickness provides a stable baseline for clearance and shim work where repeatable dimensions are essential. With a stated ±0.05 mm tolerance the material supports quality checks and simple pass/fail decisions during setup and inspection. This level of control reduces iteration during assembly and helps maintain consistent component behaviour across repetitive production tasks, translating into fewer rework cycles and more predictable machine performance. Long continuous length that speeds up onsite adjustments A 5 m continuous format allows production staff to cut bespoke shim pieces on demand rather than relying on multiple pre-cut gauges. The continuous length reduces material joins and minimises the need for stocking many individual sizes, which streamlines logistics and saves bench space. For maintenance and fixturing work, the uninterrupted tape enables multiple shims to be produced from a single roll, increasing operational efficiency and shortening adjustment times during on-site interventions. Narrow width and handling that suit confined assemblies The 12.7 mm working width is tailored to applications with restricted access such as bearing seats, valve clearances or thin-walled housings. The slim profile aids insertion in tight gaps while the strip format ensures controlled placement and trimming. Combined with the product’s measured tolerance, the format promotes repeatability and reduces measurement uncertainty when fitted into stacks or layered shims, improving the predictability of final assembly fits. Industrial readiness and supply backed by experience Supplied under the Metav IndustryLine, this strip is positioned for consistent workshop use and integration into maintenance inventories. The product’s specification and format make it suitable for a wide range of industries, from plant engineering to precision toolmaking, where standardised shim thicknesses and durable handling are required. As a long-format precision material, it supports both ad hoc repairs and planned production adjustments, helping teams achieve measured outcomes with less downtime. Contact Metav Werkzeuge for tailored advice and fast European dispatch from Emmerich — request the M318.685 for technical specification sheets or application guidance Technical data Article number: M318.685 GTIN: 4054469129709 Manufacturer: Metav IndustryLine Category: Lehren / gauges Facts Length: 5 000 mm Thickness: 0.85 mm Width: 12.7 mm Tolerance / accuracy: ±0.05 mm Weight: 0.52 kg Tariff number: 90173000 Special features Long-format continuous shim tape Narrow format for confined gaps Suitable for shimming, gap setting and calibration Designed for repeatable mechanical adjustments FAQ What applications is this strip suited for? The precision feeler strip M318.685 is suited for shimming, gap setting and clearance adjustments in assembly, plant maintenance and toolmaking where a 0.85 mm baseline thickness is required. Can pieces be cut to custom lengths from the roll? Yes — the 5 m continuous length allows bespoke shims to be cut to size on site for immediate use, reducing the need to stock multiple pre-cut sizes. How precise is the material for measurement tasks? The strip is specified with a tolerance of ±0.05 mm, supporting reproducible results for standard industrial shimming and basic inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 m x 1.00 mm Precision Feeler Gauge Tape 12.7 mm Width, Supplied in Case - Metav IndustryLine
For precise gap and clearance checks over long distances, the combination of 1.00 mm thickness, 12.7 mm width and a 5 m length delivers stable, reproducible measurements with industrial reliability; order the Precision feeler gauge M318.600 directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler gauge M318.600 — 1.00 mm thickness, 5 m length Precision feeler gauge M318.600 for long-range gap measurement and calibration tasks in workshop and production environments 1.00 mm thickness for consistent reference 5 m length for long-range measurements 12.7 mm width increases profile stability Industrial accuracy: ±0.05 mm tolerance Stable long-range measurement for large assemblies The gauge’s generous 5 m length and a 12.7 mm wide profile are designed to reduce bending and provide a consistent reference when checking gaps and clearances across larger components. Where shorter feeler strips can deform over span, this format maintains contact geometry and improves repeatability. The robust 1.00 mm thickness contributes to tactile feedback during insertion, so measurements are easier to interpret and reproduce even on extended runs. Industrial-grade accuracy with clear tolerances Specified with an accuracy of ±0.05 mm, this instrument meets common industrial tolerances and supports routine quality checks in mechanical workshops and production lines. The stated tolerance corresponds to the industry standard for precision gauges used in general machine building; it enables reliable pass/fail decisions without over‑specifying metrology procedures. For tasks that demand exacting control, the gauge provides a verifiable baseline that integrates smoothly with existing inspection routines. Practical design for workshop handling and typical applications At approximately 0.504 kg, the assembly is light enough for two-person handling during installation yet substantial enough to feel stable while in use. The construction suits tasks such as alignment checks on fixtures, bore-to-bore clearance assessments and verifying spacer heights in assembly rigs. The product is listed under measuring gauges and is identified for workshop and production use; traceable identifiers such as the GTIN support inventory and quality assurance workflows in industrial procurement. For tailored procurement or application support, contact Metav Werkzeuge for product specification matching and availability — Metav’s specialists in Emmerich provide detailed advice and order handling for the M318.600 precision feeler gauge Technical data Article number: M318.600 GTIN: 4054469129433 Tariff number: 90173000 Brand: Metav IndustryLine Core technical values Length: 5,000 mm Thickness: 1.00 mm Width: 12.7 mm Accuracy: ±0.05 mm Weight: 0.504 kg Special features Category: Measuring gauges / Lehren Application: Gap and clearance measurement Packaging identifier: included in product data SKU: M318.600 FAQ What measurement tasks is this gauge best suited for? The Precision feeler gauge M318.600 by Metav IndustryLine is designed for long-range gap and clearance checks, alignment verification and spacer-height measurements in workshop and production settings. Does the gauge meet industrial tolerance requirements? Yes, the M318.600 is specified with an accuracy of ±0.05 mm, which aligns with typical industrial standards for precision gauges used in mechanical engineering and routine quality control. How does the gauge’s geometry influence measurement reproducibility? The 12.7 mm width combined with a 1.00 mm thickness provides a stiffer profile, so the feeler maintains form over distance and delivers more reproducible contact conditions during inspections with the M318.600. Is the product identifiable for stock and procurement systems? The Precision feeler gauge M318.600 is supplied with GTIN 4054469129433 and tariff number 90173000 to support inventory tracking and customs documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 mm Ceramic Measurement Ball (Si3N4) 0.003 mm Accuracy, HV1400-1700 Hardness - Metav IndustryLine
Take advantage of the combination of extreme wear resistance, pinpoint dimensional accuracy and repeatable surface quality to support reliable gauge and inspection workflows; order the ceramic measuring sphere directly via Metav Werkzeuge or ask our consultants if needed. Ceramic Measuring Sphere SI3N4, Ø 5 mm — 0.003 mm accuracy (Metav IndustryLine) The Ceramic Measuring Sphere SI3N4, 5 mm is a precision gauge sphere for reference and inspection applications, designed for use in calibration rigs, tactile probing checks and high‑accuracy gauge assemblies in industrial metrology. Silicon nitride (Si3N4) for exceptional wear resistance Diameter accuracy 0.003 mm for precise reference Diameter tolerance 0.00008 mm for tight repeatability Surface roughness Ra 0.00001 for minimal contact error Consistent reference for inspection and calibration The sphere is manufactured from silicon nitride (Si3N4), a technical ceramic that combines high hardness with thermal stability. With a nominal diameter of Ø 5 mm and a specified accuracy of 0.003 mm, the component serves as a compact reference element in probe calibration and comparative measurement setups. The material choice reduces wear during repeated contact cycles and limits thermal expansion compared with common metallic spheres, which supports repeatable measurements across shifts and environmental changes. Measurable benefits for metrology processes Fine surface quality and tight geometry reduce measurement scatter: the product features a tolerance of 0.00008 mm and a surface roughness of Ra 0.00001, attributes that lower contact uncertainty when used with tactile or optical probes. These parameters mean that the sphere contributes negligible form error to short‑range calibrations and can be relied upon as a stable datum in inspections of miniature parts or when validating machine probing routines. The hardness rating HV1400–1700 emphasises resistance to indentation under common probe forces. Practical integration into workshop and lab environments Compact mass and size make the component easy to position in fixtures or on setting plates without affecting larger assemblies: the unit weight is indicated as 0.08 kg, offering a balance between handling and stability. As a gauge element categorised under gauges, it is suitable for incorporation into existing inspection jigs, comparator stands and reference sets. Traceability is aided by clear product identification (GTIN and SKU), allowing straightforward inventory and quality‑management records in production or calibration labs. Contact Metav Werkzeuge in Emmerich for advice on integrating the gauge sphere into measurement rigs or to arrange prompt delivery of the Metav IndustryLine ceramic measuring sphere M318.435. Technical Data Article number: M318.435 GTIN: 4054469184357 Material: Silicon nitride (Si3N4) Diameter: 5 mm Accuracy: 0.003 mm Weight: 0.08 kg Hardness: HV1400–1700 Facts Diameter tolerance: 0.00008 mm Surface roughness Ra: 0.00001 Nominal size: 5 mm Category: Gauges Special features High wear resistance ceramic Low thermal expansion relative to metals Suitable for tactile probing and comparator use Compact reference element for metrology setups FAQ What does the 0.003 mm accuracy mean for measurement tasks? The stated accuracy of 0.003 mm denotes the maximum expected deviation from the nominal diameter of the Ceramic Measuring Sphere SI3N4, 5 mm during delivery; it provides a reliable reference tolerance for short‑range calibrations and probe checks. Why choose a silicon nitride sphere over a steel sphere? Silicon nitride (Si3N4) offers superior wear resistance and lower thermal expansion than many steels; the material choice for the gauge sphere reduces surface degradation and improves stability in repeated-contact applications. Can this sphere be used for probe calibration on coordinate measuring machines? Yes, the gauge sphere’s geometry and surface quality are suitable for use as a reference in probe calibration routines and quick verification checks within inspection workflows. How is repeatability supported by the sphere’s specifications? Repeatability benefits from the combination of a tight diameter tolerance (0.00008 mm), low surface roughness (Ra 0.00001) and high material hardness (HV1400–1700), which together minimise contact‑induced variation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 mm Gauge Ball Pair Hardened Chrome Steel 0.003 mm Accuracy, 0.00008 mm Diameter Tolerance - Metav IndustryLine
Benefit from the combination of hardened chrome-steel construction, a compact 5 mm diameter and a verified 0.003 mm accuracy for reliable reference measurements; order the gauge ball pair directly via Metav Werkzeuge or consult our specialists for application advice. Gauge ball pair, 5 mm — hardened chrome steel, 0.003 mm accuracy (Metav IndustryLine) A gauge ball pair designed as a compact, high-precision reference for gauging, fixture set-up and comparative checks in workshop and metrology environments. Hardened chrome-steel spheres, >HRC 62 Diameter 5 mm, tight tolerance 0.00008 mm Measurement accuracy 0.003 mm Supplied as a matched pair, weight approx. 0.05 kg Precision that shortens inspection cycles The matched spheres serve as a compact high-precision reference for routine checks and set-ups. With a nominal diameter of 5 mm and an indicated measurement accuracy of 0.003 mm, the pair reduces uncertainty during comparative measurements and simplifies verification tasks. The very tight diameter tolerance of 0.00008 mm ensures reproducible contact geometry for tactile probes and mechanical comparators, which in turn leads to faster decision-making in quality control workflows. Material and finish that ensure stability Manufactured from hardened chrome steel and specified at >HRC 62, the spheres resist wear and maintain dimensional stability under repeated contact. A surface roughness of 0.00001 mm supports consistent probe responses and minimises micro-variation at the contact point. These material and finish properties make the spheres suitable as durable datum features for short-range checks and for use where repeatability is the priority rather than bulk handling. Practical use in inspection and set-up routines The matched pair format is intended for applications that require identical reference points, such as comparative measurements, gauging fixtures and small assembly alignments. Their compact form factor allows integration into tight assemblies or fixture jaws without affecting the surrounding geometry. Thanks to the low mass (approx. 0.05 kg per set) and stable hardness, the spheres provide a reliable reference without introducing significant inertia or deformation during probe contact. Quality indications and application relevance Supplied as a set of two, the spheres are produced to very narrow tolerances that support consistent metrology practice. Their 0.003 mm accuracy and high hardness make them suitable for precision checks rather than coarse alignment tasks. The product is ideal where reproducible contact conditions are required in gauging workflows and as a repeatable standard for short-range verification tasks. For customised advice on integration into specific inspection routines, Metav’s consultants can clarify compatibility with measuring systems and fixtures. Contact Metav Werkzeuge for matched gauge spheres, specification support and reliable delivery from Emmerich. Technical data Article number: M318.415 GTIN: 4054469184036 SKU: M318.415 Set contents: 2 pieces Facts Diameter: 5 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness: 0.00001 mm Hardness: >HRC 62 Weight (set): 0.05 kg Special features Material: hardened chrome steel Supplied as a matched pair Intended use: gauging / reference spheres High surface finish Category: Gauging FAQ What diameter and tolerance do the spheres have? The spheres have a diameter of 5 mm with a diameter tolerance of 0.00008 mm, specified for the gauge ball pair M318.415. How accurate are the gauge spheres for reference work? The matched pair is specified with an accuracy of 0.003 mm, which makes the balls suitable as a short-range reference for repeatable checks and comparative measurements. Are the spheres hardened for wear resistance? Yes, the spheres are manufactured from hardened chrome steel with a hardness greater than HRC 62, providing durability under repeated contact. In which applications are these spheres typically used? The gauge ball pair is used for fixture set-up, comparative gauging and as compact datum points where reproducible contact geometry is required. How are the spheres supplied? The item is supplied as a matched set of two pieces (set of two), ready for immediate use in inspection routines. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 mm Limit Go/No-Go Pin Gauge With Wear Allowance, DIN 7162 - Filetta
Combine hardened steel construction, conformity to DIN 7162 and a defined wear allowance on the good side to ensure reliable, repeatable checks of internal diameters. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for batch requirements and inspection planning. Filetta Limit Plug Gauge MS911.208 — Hardened steel, DIN 7162 A Filetta limit plug gauge designed for straightforward verification of internal diameters in production, inspection and toolmaking environments. Hardened steel construction DIN 7162 conformity Wear allowance on good side Durable design for consistent inspection results The gauge pin is manufactured from hardened steel, giving a robust contact surface that resists deformation and extends service life under frequent use. Conformity with DIN 7162 ensures dimensional consistency between batches, which supports reproducible measurement routines on the shop floor. The supplied wear allowance on the good side is a defined margin that permits planned replacement or reconditioning before the gauge falls outside acceptable limits, helping to maintain process stability. Efficient application in production and quality control As a compact limit plug gauge, this tool allows rapid Go/No‑Go style checks of bore diameters without elaborate set‑ups. The simple geometry makes inspection fast and unambiguous: a correct fit confirms compliance, while a no‑fit indicates corrective action is required. For assembly lines and first‑article inspections the gauge provides a quick, objective pass/fail criterion that reduces downstream rework and supports lean quality processes while keeping handling straightforward for operators. Planning for traceability and maintenance Each item is identified by the article number MS911.208, which supports clear inventory and inspection records. The combination of a hardened contact surface and the specified wear allowance aids maintenance scheduling: gauges can be tracked for accumulated wear and replaced before causing measurement uncertainty. The material and standard reference also ease procurement and cross‑checking with technical drawings, making the component a dependable: repeatable reference for routine internal‑diameter verification. Choose Filetta limit plug gauges for dependable internal‑diameter control — contact Metav Werkzeuge in Emmerich for batch quotations and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS911.208 Brand: Filetta Material: hardened steel Standard: DIN 7162 Size: 5 mm Special note: wear allowance on the good side Core specifications Diameter: 5 mm Special features Hardened steel construction Wear allowance on the good side Conforms to DIN 7162 Category: limit plug gauge / gauge pin FAQ What is the primary purpose of this limit plug gauge? The Filetta limit plug gauge MS911.208 is intended for rapid verification of internal diameters, providing a straightforward Go/No‑Go style check in production and inspection contexts. Which material and standard apply to the gauge? The gauge is made from hardened steel and manufactured to meet DIN 7162, ensuring dimensional stability and industry‑recognised conformity. How should wear allowance on the good side be interpreted? Wear allowance on the good side denotes a planned margin by which the contact face may wear before the gauge is considered out of tolerance; it supports proactive maintenance and replacement scheduling. Can the gauge be used for routine assembly checks on the production line? Yes — the design of this limit plug gauge is suited to fast, repeatable pass/fail checks on bore diameters, making it useful for in‑line quality control and assembly verification. How is the item identified for inventory and traceability? The article number MS911.208 is used to track the item in inventory and inspection records, aiding traceability and maintenance documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
5 mm Limit Pin Gauge Wear Allowance, DIN 7162 - Filetta
The combination of hardened steel construction, conformity with DIN 7162, and a clearly defined wear allowance on the good side ensures reliable, repeatable go/no-go verification and long service life; order this gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Limit gauge pin G7, 5 mm — Filetta Limit gauge pin for precision go/no-go checks and wear assessment in workshop and inspection environments. Hardened steel construction Conforms to DIN 7162 Wear allowance marked on good side Consistent pass/fail inspection for production routines The robust hardened steel body provides a stable reference surface that resists deformation under repeated use, supporting repeatable inspection results when used for go/no-go checks. Conformity with DIN 7162 gives a recognised benchmark for dimensional behaviour and interchangeability, so inspection processes can be standardised across machines and shifts. This reliability reduces rework, streamlines quality control and shortens inspection cycles in a busy workshop environment. Visible wear allowance aids maintenance planning A clearly indicated wear allowance on the good side makes it straightforward to monitor gauge condition and schedule replacements before limits are exceeded. The marked allowance functions as an operational guide for maintenance teams and enables conservative assessment of gauge life without complex measurement procedures. This feature supports predictable tool management, helping to avoid unexpected inspection failures and maintain traceable measurement practice. Compact form for fixtures and tight spaces With a nominal size of 5 mm, the pin is suited to tight-fixture applications and small-bore verification tasks common in jigs and measuring arrangements. The compact diameter enables use as a precision locating element or measuring pin where access is limited, while the hardened finish sustains surface integrity under frequent contact. As a limit gauge pin, it delivers a focused solution for dimensional control of small components and fit checks within assemblies. For precision go/no-go control rely on Filetta quality—contact Metav Werkzeuge for availability, technical advice and secure delivery to your workshop Technical data Article number: MS911.166 Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Measurements Nominal size: 5 mm Special features Wear allowance on the good side Category: measuring pins FAQ What is the intended use of this limit gauge pin? The limit gauge pin is designed for go/no-go verification and dimensional checks in workshop metrology; Filetta manufacture it to serve as a precise reference pin for small-bore and fit inspections. How does the wear allowance improve gauge management? A marked wear allowance on the good side provides a visual threshold for service life; when the allowance is reached the pin should be replaced to preserve measurement integrity. Is the product compliant with any standards? Yes, the pin complies with DIN 7162, ensuring standardised dimensional characteristics suitable for industrial inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
5 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS 3 - Metav IndustryLine
Take advantage of a hardened, lapped gauge ring made to DIN standards for dependable repeatability; its form C profile ensures stable seating and fast set‑up in inspection and production tasks. Order the setting ring directly via Metav Werkzeuge or ask our consultants if needed. Setting ring 5 mm — hardened gauge ring (DIN 2250, JS3) by Metav IndustryLine Setting ring 5 mm is a compact gauge ring designed for dimension setting and reference checks in workshop and metrology environments, supplied in a form C profile for secure location on spigots and gauges. Hardened, lapped gauge steel construction Conforms to DIN 2250 and DIN 286, JS3 Form C profile for stable positioning Nominal diameter 5 mm for precise setting Durable construction for long-term reliability Manufactured from hardened and lapped gauge steel, this small reference ring resists wear and preserves dimensional integrity over many cycles. The fine lapping finish reduces surface roughness and contact variability, which converts directly into consistent repeatability when adjusting comparators, plug gauges or go/no-go setups. For production lines and inspection benches where frequent mechanical contact is routine, the robust material choice minimises maintenance intervals and replacement costs. Standards-backed tolerance for assured measurement Compliance with DIN 2250 and DIN 286, with tolerance class JS3, provides a clear, auditable basis for acceptance in quality processes. Those standards define nominal and deviation criteria that fit typical workshop calibration chains, allowing the ring to serve as a reliable master for setting tools and checking equipment. The declared conformity supports traceable procedures in incoming inspection and set-up operations, making the component suitable for both routine and documented quality tasks. Practical form and handling that speed up set-up The form C geometry gives a stable seating surface that accelerates alignment on shafts or spigots and reduces the risk of eccentric placement during use. With a 5 mm nominal diameter, the ring is compact yet easy to manipulate with common bench tools or pick‑up tweezers used in small-part assembly. Its compactness saves bench space and allows quick interchange into fixtures or gauge blocks for fast, repeatable set‑up without elaborate fixturing. Request precise technical advice or an individual offer from Metav Werkzeuge — our specialists at the Emmerich site will help integrate this Metav IndustryLine setting ring into existing measurement routines or production jigs Technical Data Article number (SKU): M313.005 GTIN: 4054469120430 eClass: 21170104 Tariff number: 90173000 Facts Diameter: 5 mm Standards: DIN 2250; DIN 286 Tolerance class: JS3 Special features Material: gauge steel, hardened and lapped Form: C Category: Gauges / Setting rings FAQ What tolerance class does this ring meet? The setting ring meets the JS3 tolerance class as specified under DIN 2250 and DIN 286, providing defined deviation limits for reliable setting tasks. Is the ring suitable as a workshop master for setting gauges? Yes — the M313.005 setting ring is intended for use as a reference master for setting comparators and plug gauges thanks to its hardened and lapped surface. Which materials is the ring compatible with when used for setting or checking? As a dimensional reference, the ring is material‑agnostic in application; it functions as a master for setting measuring instruments that will be used on metals, plastics and other components commonly encountered in workshop and inspection work. How does the form C profile help in practice? The form C profile offers a stable seating geometry that reduces positioning error on spigots and shafts, speeding up repeated set‑ups and improving repeatability. Can the ring be used in documented quality procedures? Yes — conformity to DIN 2250/DIN 286 supports inclusion in documented inspection routines and quality records where standardised masters are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-14mm Probe Holder With Good/Reject Indication - Metav IndustryLine
Take advantage of a compact, reliable gauge accessory that combines clear visual sorting with broad pin compatibility — ideal for inline inspection and fixture use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Measuring pin holder M318.563 — holder for 5.0–14.0 mm pins with 'Good' / 'Reject' marking (Metav IndustryLine) The Measuring pin holder M318.563 is a compact gauge accessory for mounting measuring pins from 5.0–14.0 mm, designed for rapid visual sorting and integration into inspection setups. Secure mounting for 5.0–14.0 mm pins Clear 'Good' and 'Reject' visual markings Compact 145 mm length for tight spaces Lightweight 0.1 kg for easy fixture use Faster, more reliable visual inspection and sorting This holder converts a single measuring pin into an immediate pass/fail indicator, reducing handling time and human error during routine checks. Fitted for 5.0–14.0 mm pins, the unit provides consistent seating and visible status via the 'Good' / 'Reject' marking, which supports quick decision-making on the shop floor. By standardising the visual cue, the holder improves throughput and lowers the risk of rework without altering existing measurement methods. Practical integration into gauges and fixtures With a 145 mm overall length and a 0.1 kg weight, the holder is designed for easy positioning in compact fixtures or mobile inspection rigs. Its form factor supports repeatable placement, helping maintain repeatability in comparative checks and go/no‑go workflows. The compact dimensions make it suitable where space is limited, while the lightweight nature simplifies manual handling and reduces inertia in automated feeders. Proven supply reliability and traceable quality The product is part of the Metav IndustryLine, benefitting from Metav’s European distribution and quality filter based in Emmerich. Metav combines broad product availability with sector expertise to ensure reliable supply for production and service workshops; the company’s track record of thousands of professional customers underlines this. For technical clarifications or configuration options relating to inspection integration, Metav’s consultants can provide targeted guidance to match the holder to measurement routines. Contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich stock — our team will confirm suitability of the Metav IndustryLine measuring pin holder M318.563 for the intended inspection setup Technical Data Article number: M318.563 GTIN: 4054469167145 Label: Measuring pin holder, for measuring pins 5 - 14 mm with "Good" and "Reject" marking Manufacturer: Metav IndustryLine Facts Length: 145 mm Weight: 0.1 kg Tariff number: 90173000 Special features Suitable for measuring pins 5.0–14.0 mm Distinct 'Good' and 'Reject' visual marking for pass/fail sorting Categories: Measuring pins; Gauges FAQ Which pin diameters fit this holder? The measuring pin holder M318.563 accepts measuring pins from 5.0–14.0 mm, allowing use with a broad range of standard gauge pins. How does the 'Good' / 'Reject' marking work in practice? The clear 'Good' / 'Reject' marking on the holder provides an immediate visual cue during inspection runs, supporting fast sorting without additional tools. Can the holder be integrated into existing fixtures or test rigs? Yes. The holder’s 145 mm length and 0.1 kg weight make it suitable for mounting in compact fixtures, jigs or mobile inspection stations where repeatable pin seating is required. What identifiers should be used when ordering or referencing the product? Reference article number M318.563 and GTIN 4054469167145 for precise identification of the Metav IndustryLine measuring pin holder. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-6mm Ceramic Gauge Pin Set 0.01mm Graduation, Stainless ZrO2, HV1250, Accuracy
Take advantage of the combination of zirconia ceramic construction, ±0.0015 mm accuracy and a comprehensive 101-piece range for reliable, repeatable fit checks in fine-detail workshop work. Order the set directly via Metav Werkzeuge or consult the team for application advice. Ceramic gauge pin set, 101-piece — 5.00–6.00 mm, 0.01 mm increments (Metav IndustryLine) The Ceramic gauge pin set, 101-piece is a workshop-grade collection of zirconia gauge pins designed for high-precision inspection and fit testing in the 5.00–6.00 mm range. Zirconia ceramic, antimagnetic and wear-resistant Hardness HV 1250 for long tool life Accuracy < ±0.0015 mm for fine inspection 101-piece set, 5.00–6.00 mm in 0.01 mm steps Precision where small tolerances make the difference The set delivers exceptionally fine dimensional control thanks to zirconia ceramic pins that combine low wear with excellent stability. With a stated accuracy of < ±0.0015 mm, these pins are suitable where repeatable fits and minimal clearance variation are critical. The 0.01 mm step spacing across the set enables incremental adjustment and interpolated checking without the need for custom pins, which reduces setup time and improves throughput in inspection tasks. Classified within the micro range (maximum measurement span up to 10–100 mm), this kit is tailored to precision toolrooms, gauge shops and watchmaking or micro‑component assembly where compact, high‑accuracy gauges are required. Durable, non-magnetic pins built for workshop use Made from zirconia ceramic, each pin resists abrasion and remains dimensionally stable under repeated handling. The material’s antimagnetic properties prevent magnetic adhesion and distortion during checks on delicate or magnetically sensitive components. With a hardness of HV 1250, the pins withstand repeated insertion and withdrawal without premature wear, preserving nominal diameter and reducing rework. The workshop version includes a 50 mm length per pin, a practical balance between reach and stiffness, and the set is supplied with a dedicated holder and a compact plastic case for organised storage and safe transport. Designed for efficient measurement workflows A 101‑piece range from 5.00 to 6.00 mm in 0.01 mm increments provides near‑continuous coverage across the interval, simplifying tasks such as press‑fit assessment, gauge setting and clearance verification. The set’s even spacing reduces trial‑and‑error when selecting the correct pin size and integrates smoothly into quality control routines that demand traceable, reproducible checks. Because the pins are non-magnetic and wear-resistant, they are also well suited to mixed‑material environments and parts where contact contamination or magnetic attraction would otherwise impair measurement reliability. The compact case and labelled holder support fast selection and return to stock, which helps maintain an efficient inspection workflow. For precision fitting and durable, antimagnetic performance choose the Metav IndustryLine Ceramic gauge pin set; contact Metav Werkzeuge in Emmerich for procurement or technical guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M318.595 SKU: M318.595 Manufacturer: Metav IndustryLine Set size: 101 pieces Range: 5.00–6.00 mm Step: 0.01 mm Core technical figures Length: 50 mm Hardness: HV 1250 Accuracy: < ±0.0015 mm Piece increments: 0.01 mm Measurement range min/max: 5.00 mm / 6.00 mm Materials & special features Material: zirconia ceramic Antimagnetic Wear-resistant Workshop version Includes holder and plastic case 101-piece set FAQ What tolerance can be expected from the Ceramic gauge pin set, 101-piece? The Ceramic gauge pin set, 101-piece is specified with an accuracy of < ±0.0015 mm, making it suitable for fine inspection and tight tolerance checks. What are the pins made from in the Ceramic gauge pin set, 101-piece? The pins are made from zirconia ceramic, offering high hardness (HV 1250), excellent wear resistance and antimagnetic behaviour. How is the Ceramic gauge pin set, 101-piece supplied and stored? The Ceramic gauge pin set, 101-piece is supplied in a plastic case with a dedicated holder; each pin measures 50 mm in length for practical workshop use. Is the Ceramic gauge pin set, 101-piece suitable for magnetically sensitive parts? Yes. The zirconia ceramic pins are antimagnetic, which prevents magnetic interference when measuring or fitting magnetically sensitive components. What typical applications suit the Ceramic gauge pin set, 101-piece? Typical uses include fit and clearance checks, press‑fit verification, gauge setting and fine inspection within precision toolrooms and small‑component assembly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-6mm Gauge Pin Set 21-Piece 70mm Steps 0.05mm Plastic Case - Metav IndustryLine
Precision checking made simple: the 21-piece gauge pin set combines a 5.00–6.00 mm measuring range, 0.05 mm graduation and 70 mm pin length to deliver dependable bore verification; supplied in a protective case for safe transport. Order the gauge pins directly via Metav Werkzeuge or consult our advisors for specification support. Metav IndustryLine Gauge Pin Set M318.825 — 21-piece precision gauge pins, 5.00–6.00 mm, 0.05 mm steps The gauge pin set is a workshop-grade checking tool intended for accurate diameter verification and tolerance control in machine shops, toolrooms and inspection benches. 21-piece precision pin set Diameter range 5.00–6.00 mm 0.05 mm diameter increments Supplied in protective case Consistent tolerance checks for production control The set provides a compact solution for stepwise diameter verification: with 0.05 mm increments across the 5.00–6.00 mm span, operators can perform fine-grain checks of bores and fits with predictable resolution. This gradation supports rapid identification of out-of-tolerance conditions during incoming inspection or in-process control, reducing rework and increasing throughput. The logical sequence of pin diameters simplifies selection and speeds routine gauging tasks without compromising clarity. Durable construction built for everyday workshop use Each pin is manufactured from special steel chosen for wear resistance and dimensional stability under repeated use. The 70 mm pin length balances accessibility and rigidity for typical bore depths encountered in mechanical engineering and mould components. Thanks to the choice of material and production tolerances, the pins retain geometry under standard handling, so measurement repeatability is improved compared with ad-hoc checking methods. The construction supports reliable, long-term use in busy shop-floor environments. Practical set design to streamline inspection workflows Containing 21 individual pins in regular steps, the set covers small-step verification without excess inventory. The organised layout and protective case keep pins sorted and protected during transport and storage, reducing the risk of damage and measurement uncertainty. At 0.95 kg total weight, the kit remains portable for bench or field use while offering sufficient mass for stable handling. The compact format is particularly useful for service engineers and quality technicians who require a comprehensive, yet transportable, gauging solution. Typical applications and compatibility with standard metrology tasks The pins are suited to bore checking, gauge reference tasks and quick go/no-go verification when integrated into inspection routines. Their diameter progression makes them appropriate for tool and die shops, maintenance departments and quality control laboratories where incremental checks are frequent. The set complements verifiers and comparator fixtures, fitting naturally into standard metrology workflows and supporting documentation of dimensional checks as part of quality assurance procedures. Choose Metav IndustryLine for reliable bore verification — request the M318.825 gauge pin set from Metav Werkzeuge or contact our technical advisers at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and availability. Technical data SKU: M318.825 GTIN: 4054469181974 Weight: 0.95 kg Core specifications Measuring range: 5.00–6.00 mm Graduation: 0.05 mm Length: 70 mm Pieces per set: 21 Materials & features Material: Special steel Supplied in protective case Category: Gauges (Lehren) FAQ What diameter range does the set cover? The gauge pin set covers diameters from 5.00 to 6.00 mm in 0.05 mm steps for fine incremental checking. How many pins are included and what is the SKU? The kit comprises 21 pins; the item is supplied as Metav IndustryLine M318.825. What material are the pins made from? The pins are made of special steel chosen for durability and dimensional stability under workshop conditions. Is a case included for transport and storage? Yes, the M318.825 set is supplied in a protective case to keep pins organised and secure during transport. Which workshop tasks is this set best suited to? The set is tailored to bore checking, tolerance verification and routine inspection work in machine shops, toolrooms and maintenance departments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.0 mm Limit Plug Gauge H7 DIN 2245 Hardened Gauge Steel - Metav IndustryLine
Data inconsistency detected: the supplied product data contains conflicting entries that prevent the generation of a reliable product description. Specifically, the item is simultaneously flagged as rejected ("ausschuss" = true) and as in good condition ("gut" = true), which are mutually exclusive statuses. In addition, the weight information is inconsistent: the structured field gives 0.1 kg while the descriptive label lists 0,01 kg. These contradictions affect core specifications and must be resolved before a compliant, accurate product text can be produced. Please review and correct the source data (condition flag and weight), then resubmit. If clarification is required or further assistance is needed to reconcile the entries, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 so the record can be corrected and the full product description completed.
5.00mm Gage Pin 50mm Length ±0.001mm, Workshop Finish - Metav IndustryLine
This workshop-grade gauge pin combines 5.00 mm nominal diameter with an exceptional ±0.001 mm tolerance and a 50 mm length to secure reliable end‑dimension checks; its special steel construction supports long-term durability and repeatable results. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.500 — single test pin, 5.00 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.500 is a single precision test pin designed for end‑dimension verification and alignment tasks in workshop inspection routines Workshop-grade execution Diameter 5.00 mm, tolerance ±0.001 Length 50 mm for precise reach Made from special steel, durable finish Consistent measurement accuracy that reduces rework The core advantage of this precision test pin is its reliable tolerance of ±0.001 mm, which ensures repeatable results when checking final dimensions. In inspection workflows, a small systematic error can cascade into scrap or rework; the finely machined 5.00 mm diameter and the tight tolerance minimise that risk by providing a stable reference for plug checks, alignment and go/no‑go applications. The controlled tolerance also facilitates straightforward statistical process control and supports efficient decision‑making on the shop floor. Robust construction for everyday workshop use Manufactured from special steel, the pin offers resistance to wear and maintains a stable contact geometry under regular handling. The 50 mm shank length provides access to recessed bores and end faces while keeping handling intuitive during manual checks. The workshop‑grade execution balances durability with accurate geometry, so routine use in production environments does not compromise the measuring edge. Small mass and compact dimensions make the pin simple to position and index during repeated checks. Practical integration into inspection routines This single test pin is suitable for repetitive end‑dimension verification, assembly alignment and fixture setting where a compact precision reference is required. The simple geometry supports quick visual inspection and, where applicable, integration into custom fixtures or measuring jigs. Traceable identification via SKU and barcode systems helps maintain inventory and measurement traceability within quality procedures while the design keeps handling and interchangeability straightforward for machinists and quality technicians. Choose Metav IndustryLine’s gauge pin M323.500 for dependable end‑dimension checks and contact Metav Werkzeuge in Emmerich for tailored advice and quick supply from the European quality hub. Technical Data SKU: M323.500 GTIN: 4061905059735 Category: Messstifte Facts Diameter: 5.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Special features Workshop execution Material: special steel Single test pin design FAQ What applications suit this gauge pin best? This gauge pin is intended for end‑dimension checks, assembly alignment and fixture setup; the M323.500 is optimised for repeatable plug‑type measurements in workshop inspection routines. How precise is the measurement reference provided by the pin? The pin offers a tolerance of ±0.001 mm, making it suitable where high repeatability and tight control limits are required during final part verification. Which material is used for the test pin and why does it matter? The pin is made from special steel, chosen to preserve contact geometry under repeated use and to provide resistance to wear in a production environment. Can the pin be used in custom fixtures or jigs? Yes, the compact single‑pin design and standard dimensions of the M323.500 facilitate integration into fixtures and jigs for repeatable positioning and measurement. Is the gauge pin suitable for deep or recessed bores? The 50 mm length provides sufficient reach for many recessed checks while remaining easy to handle for manual inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.01-6 mm Gauge Pin Set 101 pcs Step 0.01 mm With Pin Holder In Plastic Case - Metav IndustryLine
Take advantage of precise, repeatable checking with a finely graded gauge-pin range and robust special-steel construction; the kit’s 0.01 mm gradation and declared 0.004 mm accuracy ensure reliable acceptance testing and reduced rework. Order directly via Metav Werkzeuge or consult the Metav team for application advice and delivery details. Metav IndustryLine Gauge Pin Set M318.575 – 5.01–6.00 mm, 0.01 mm gradation The gauge pin set M318.575 is engineered for precision fit and hole inspection in workshop and quality‑control environments, offering a graded range for fast go/no‑go checks and incremental measurement tasks. Precision 0.01 mm gradation Range 5.01–6.00 mm for fine fit checks Supplied with pin holder for secure handling Special steel construction for daily use Reliable accuracy that speeds up inspection The graded pins deliver a 0.01 mm gradation, enabling fine increment checks across the measured interval, while the specified 0.004 mm accuracy supports consistent decision making at inspection stations. Such resolution allows operators to verify bores and fits without repeated adjustments, which translates directly into fewer scrap parts and faster throughput. In practice, the controlled increments simplify comparative gauging and limit subjective judgement, so routine checks become reproducible and auditable. Built for workshop handling and longevity Manufactured from special steel, the pins combine surface hardness and dimensional stability for everyday use in production environments. The included pin holder supports safe handling and accurate seating of individual pins, reducing the risk of damage and easing repetitive measurements. The compact design suits bench use and portable inspection kits, where resilient materials and straightforward handling reduce downtime and facilitate quicker inspection cycles. Practical design for efficient quality workflows Covering the 5.01–6.00 mm interval with fine steps, the set is ideal for small bore verification, gauge‑block cross‑checks and assembly controls where tight fits are common. The graded bank of pins integrates neatly with established workshop routines and complements other metrology tools used in mechanical and metalworking trades. For applications where traceable calibration is required, please enquire with Metav Werkzeuge about available calibration options and certificates that match specific quality‑assurance protocols. Contact Metav Werkzeuge for tailored advice on process integration and suitability of the Metav IndustryLine gauge pins for specific inspection tasks; colleagues in Emmerich are available to discuss delivery and technical fitments. Technical Data Article number: M318.575 GTIN: 4054469168296 Manufacturer: Metav IndustryLine Facts Measuring range: 5.01–6.00 mm Graduation: 0.01 mm Accuracy: 0.004 mm Weight: 2.25 kg Length (pin holder): 50 mm Special features Material: Special steel Supplied with pin holder Set format for graded inspection FAQ What measurement range is covered by the gauge pins? The gauge pins cover a measuring range of 5.01–6.00 mm, suitable for fine bore and fit checks with small incremental steps. How fine are the graduations and what accuracy can be expected? The set offers a graduation of 0.01 mm and a declared accuracy of 0.004 mm, enabling precise incremental verification of bores and fits. Is the kit suitable for daily workshop use? Yes, the pins are manufactured from special steel and supplied with a pin holder, offering robust handling and suitability for routine inspection tasks. Can this set be used alongside other inspection equipment? The graded pins integrate well with standard workshop metrology tools and provide a fast method for comparative gauging during assembly or quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.01-6mm Gauge Pin Set 100pcs Step 0.01mm Special Steel, Case - Metav IndustryLine
Take advantage of the combination of high repeatability, fine 0.01 mm grading and robust special-steel construction for reliable go/no-go and inspection workflows; order the gauge pin set directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin set M318.555 – 5.01–6.00 mm, 0.01 mm grading (Metav IndustryLine) The gauge pin set M318.555 provides precision inspection pins for gauging and verification of bore diameters and fits in the 5.01–6.00 mm range, suitable for quality control and assembly verification in small-part manufacturing. 100-piece set graded at 0.01 mm Precision range 5.01–6.00 mm Made from special hardened steel Supplied in a protective transport case Consistent bore inspection with measurable benefits The graded pins in this set deliver a systematic way to verify hole diameters and clearances. With 0.01 mm increments and a stated accuracy of ±0.002 mm, the set minimises guesswork during pass/fail checks and reduces rework cycles. The pins’ uniform geometry and finish support repeatable seating in bores, so measurement variance is defined by the instrument rather than by operator feel. This improves throughput in inspection benches and speeds decisive quality judgments, making the set a pragmatic choice where traceable, repeatable checks are required. Robust construction for workshop use and longevity Manufactured from special steel, the pins withstand frequent handling and retain dimensional stability across repeated use. The material choice balances hardness and resistance to surface damage, preserving the pin form that determines fit. Each pin has a nominal length of 50 mm, providing adequate engagement in typical small bores while remaining easy to handle during manual inspection. The set’s weight and packaging further reflect a workshop-ready approach: organised storage minimises loss and protects the profiles during transport and daily use. Integration into quality workflows and practical application The set is conceived for direct use in quality control, assembly verification and first-article inspection. The clear gradation simplifies increment searches and reduces time spent interpolating sizes; in documentation it supports unambiguous reporting of measured clearance or fit. For production lines, the graded pins act as a fast comparative tool alongside micrometres or bench bore gauges, offering a straightforward method to confirm conformity before more elaborate measurement steps. The compact, graded format supports batch sampling strategies without sacrificing resolution for small-diameter components. For reliable gauging solutions and application advice, contact Metav Werkzeuge in Emmerich for tailored recommendations or to secure the M318.555 gauge pin set via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M318.555 GTIN: 4054469129389 eClass: 21170231 Tariff code: 90173000 Numbers / Core technical data Diameter range: 5.01–6.00 mm Increment: 0.01 mm Accuracy: ±0.002 mm Pieces per set: 100 Length (nominal): 50 mm Weight: 2.6 kg Special features Material: Special steel Grading: 0.01 mm steps Set type: graded gauge pins for bore inspection Supplied in protective transport case Category: Gauge pins / Gauging FAQ What precision can be expected from the gauge pins? The M318.555 gauge pin set is specified with an accuracy of ±0.002 mm and graded at 0.01 mm, providing reliable repeatability for small-bore inspection tasks. Are the pins suitable for routine workshop inspection? Yes, the set is designed for workshop and production-floor use; the special steel construction and protective case support frequent handling and straightforward organisation. How is the set organised and what does it contain? The set contains 100 graded pins covering the 5.01–6.00 mm range in 0.01 mm steps, presented for efficient selection during inspection or assembly checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.01mm Precision Test Pin ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, sub‑micrometre accuracy and compact length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.501 — Test pin, 5.01 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.501 designed as a workshop test pin for precise end‑dimension verification and fixture checks in inspection and production environments Workshop version for robust use Diameter 5.01 mm with ±0.001 mm accuracy 50 mm overall length for standard fixtures Made from special steel for wear resistance Reproducible measurements through defined tolerance control The primary advantage of this workshop test pin is its ±0.001 mm tolerance, which delivers highly reproducible end‑dimension checks and reduces uncertainty during acceptance measurements. With a defined diameter of 5.01 mm, the pin serves as a reliable datum for go/no‑go checks, positional references and plug‑gauge validations. The clearly specified accuracy enables quality engineers and inspection staff to base pass/fail criteria on measurable tolerances rather than estimations, shortening decision cycles and lowering the rate of costly rework. The compact form factor also simplifies the handling when several reference points are required in succession. Durable construction for everyday inspection and fixture use Built in a workshop version and made from special steel, the pin resists abrasive wear and maintains its diameter under regular use, prolonging service intervals and preserving measurement integrity. At an overall length of 50 mm and a nominal diameter of 5.01 mm, the component is easy to seat in standard fixtures and jigs, while its low mass (approx. 0.011 kg) minimises inertia during manual handling. The material selection focuses on a balance of hardness and toughness so that the gauge pin withstands repeated contact with mating parts and retains its calibration over an extended service life. Easy integration into inspection workflows and traceability Delivered as a single, ready‑to‑use test pin with a clear article identifier (M323.501), the component integrates cleanly into existing measurement routines and tool‑sets. The compact geometry makes it suitable for slot checks, bore verification and end‑measurement tasks where a precise reference is required. Traceability is supported by the product identifiers included in the technical data below, simplifying inventory and inspection record‑keeping. For specialised applications or batch requirements, Metav IndustryLine offers consultancy to match variants and handling practices to the shop‑floor environment. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.501 can be specified for your inspection setup or to request a tailored quotation from the Emmerich quality team. Technical data Article number: M323.501 GTIN: 4061905059742 SKU: M323.501 Numbers / Core technical data Diameter: 5.01 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.011 kg Designs / Special features Material: special steel Workshop execution Single piece test pin Category: gauge pins FAQ What is the declared tolerance of the test pin? The declared tolerance is ±0.001 mm for the gauge pin M323.501, suitable for fine end‑dimension verification. Which material is used for this gauge pin? The pin is manufactured from special steel to provide wear resistance and stable dimensional performance during repeated use. Is the length suitable for fixture and jig applications? Yes, the 50 mm overall length is intended for standard fixtures, offering a balance between reach and handling ease. Can this pin be used for positional and bore checks? The gauge pin M323.501 is suitable for bore verification, positional referencing and simple go/no‑go end checks where a fixed diameter reference is required. How is the product identified for inventory and traceability? Identification is provided via SKU M323.501 and GTIN 4061905059742 to support traceability and record‑keeping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com