Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
6.79mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, compact 6.79 mm diameter and robust special steel construction for repeatable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.679 — single 6.79 mm, ±0.001 mm accuracy (50 mm length) The Gauge pin M323.679 is a workshop‑grade inspection pin designed for precise end‑dimension verification in production and quality control. Workshop-grade inspection quality Diameter 6.79 mm with ±0.001 mm accuracy 50 mm special steel construction Protective transport case included Accuracy that keeps production moving The core advantage of this inspection pin is its ±0.001 mm tolerance, which supports high‑precision checks where small deviations can cause rework or reject rates to rise. With a nominal diameter of 6.79 mm, the pin provides a repeatable reference for end‑measurements and fits inspection fixtures with minimal play. Using such a fine tolerance as a control point reduces downstream adjustments, shortens cycle times for quality checks and contributes to consistent part interchangeability across batches. Designed for everyday workshop use Manufactured from special steel, the pin balances wear resistance and dimensional stability, making it suitable for frequent handling in a shop environment. At 50 mm length and approx. 0.018 kg mass, the component is easy to position and quick to handle during manual inspection sequences. The workshop execution focuses on practical durability: surfaces are finished to limit friction and the compact form factor minimises the risk of bending during routine use, supporting reliable measurements throughout multiple shifts. Integration into inspection routines and traceability The single‑piece inspection pin serves as a straightforward reference tool for end‑dimension verification, gaging stations and fixture validation. Its compact size enables fast insertion into bores or against shoulders, helping to accelerate go/no‑go checks without complex set‑up. The supplied protective case simplifies transport between workstations and preserves the measuring surface; together with clear article identifiers, the item can be integrated into inventory and traceability systems for audit‑ready quality procedures. Contact Metav Werkzeuge today for application advice and secure supply of the M323.679 inspection pin from the Metav IndustryLine portfolio Technical data Article number: M323.679 GTIN: 4061905062186 Weight: 0.018 kg Material: Special steel Facts Diameter: 6.79 mm Tolerance: ±0.001 mm Length: 50 mm Accuracy: ±0.001 Special features Workshop execution Protective transport case included Single gauge pin for end‑dimension checks FAQ What is the diameter tolerance of this gauge pin? The gauge pin M323.679 is specified with a tolerance of ±0.001 mm for the 6.79 mm diameter. Can this inspection pin be used for repeated shop‑floor checks? Yes, the workshop execution and special steel construction make the inspection pin suitable for frequent use in routine quality checks. Is the pin supplied ready for transport between workstations? A protective transport case is included to preserve the measuring surface during handling and transport. Which applications suit this type of pin best? The pin is intended for end‑dimension verification, go/no‑go referencing, fixture validation and spot checks in production environments. How is the product identified for ordering and inventory? Order and stock the item using article number M323.679 or GTIN 4061905062186 to ensure clear traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.7mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of ultra‑fine tolerances and a compact workshop design for reliable end‑size inspection. The combination of ±0.001 mm accuracy and a 6.70 mm diameter in a 50 mm length ensures repeatable checks and reduced rework; order directly via Metav Werkzeuge or consult our specialists for specification support. Gauge pin M323.670 — precision 6.70 mm, ±0.001 mm, 50 mm length — Metav IndustryLine Gauge pin M323.670 for accurate end‑size inspection and plug‑gauge applications in workshop and quality environments Precision tolerance ±0.001 mm Diameter 6.70 mm, special steel 50 mm overall length for end‑size checks Workshop version with transport case included Accuracy that stabilises quality control This inspection pin delivers precision where narrow tolerances matter: with a ±0.001 mm tolerance the pin is suitable for final dimensional checks and high‑repeatability comparisons. As a compact test element, the gauge pin is used to verify end dimensions and fits on mating parts, reducing rejects and downstream reworking. The tight tolerance is especially useful in small‑batch production and precision assembly where component interchangeability is critical. Robust workshop design for everyday handling Manufactured from special steel, the pin is built for frequent handling in a workshop environment. The 50 mm overall length provides sufficient support for end‑size measurement while remaining easy to seat in fixtures and gauges. Delivered in a protective transport case, the workshop version protects the precision surface in transit and storage, maintaining measurement integrity and service life even under regular use. Simple integration into inspection routines The smooth cylindrical form and defined 6.70 mm diameter make the pin compatible with common plug‑gauge fixtures, comparator stands and micrometer setups. Used as a reference or go/no‑go element, this inspection pin helps standardise checks across shifts and stations. Fewer adjustments and faster verification cycles translate into higher throughput and more consistent quality documentation. Reliable part of a comprehensive supply chain Sourcing from an established metrology range ensures traceability and availability for repeat orders. The compact weight and standard dimensions simplify inventory handling and replacement planning. Where end‑size checking forms part of a documented quality system, a calibrated reference or stable inspection pin like this supports auditability and process control without added complexity. For robust end‑size inspection, request the Metav IndustryLine gauge pin M323.670 from Metav Werkzeuge — contact our Emmerich team for delivery options and specification advice Technical data Article number: M323.670 GTIN: 4061905060243 Brand: Metav IndustryLine Category: Gauge pin / inspection pin Facts Diameter: 6.70 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.018 kg Special features Material: special steel Workshop version Delivered in transport case Intended use: end‑size inspection and plug‑gauge checks FAQ What is the tolerance of this gauge pin and for which checks is it suitable? The gauge pin M323.670 has a tolerance of ±0.001 mm and is intended for precise end‑size inspection and plug‑gauge verifications in workshop and quality control settings. Which material is used and how does it affect durability? The pin is made from special steel; this material offers robust wear resistance and dimensional stability for frequent handling and routine checks. Is the pin supplied with protective packaging? Yes, the workshop version is supplied in a transport case to protect the precision surface during transport and storage. Can the gauge pin be used in comparator fixtures or micrometer setups? The 6.70 mm diameter and 50 mm length are compatible with standard plug‑gauge fixtures and micrometer arrangements for reference and go/no‑go checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.81mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Benefit from workshop-grade accuracy with a 6.81 mm diameter and ±0.001 mm tolerance, combined with a 50 mm length that ensures stable seating in inspection fixtures; ideal for reducing rework and securing repeatable end‑dimension checks. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Gauge pin, single — 6.81 mm diameter, ±0.001 mm precision (Metav IndustryLine) A gauge pin designed for precise end‑dimension verification and routine inspection tasks in workshop and quality‑control environments. High precision ±0.001 mm Diameter 6.81 mm for end‑dimension checks Length 50 mm for stable mounting Made from special steel, workshop version Consistent accuracy that saves time and scrap The ±0.001 mm specification positions this gauge pin in the high‑precision segment for workshop inspection. Such a tolerance means the pin provides reliable pass/fail references for critical end dimensions, reducing ambiguity in go/no‑go assessments and helping to prevent costly rework. The measurement tolerance is a literal statement of deviation allowed from nominal size and underlines the component's suitability for demanding quality‑control routines in small‑part production. Robust design for everyday workshop use Constructed from special steel and specified as a workshop version, the pin balances wear resistance with practical handling. At 50 mm overall length the pin offers a secure seat in holders or fixtures without excessive overhang, improving repeatability during frequent measurements. The compact mass assists in rapid positioning while still delivering stable contact for accurate readings; the engineered material choice supports longevity in production settings where repeated insertion and withdrawal are standard. Practical integration into inspection workflows Designed for end‑dimension and final‑size verification, this precision pin integrates with bench fixtures, plug‑gauging setups and tactile inspection jigs. The simple cylindrical geometry makes it a straightforward reference in comparison tests and calibration checks of mating bores or form features. Using a standardised pin for routine checks helps standardise procedures across shifts and machines, improving process control and traceability in the workshop. For workshop‑grade gauging and application guidance from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and procurement support Technical data Article number: M323.681 GTIN: 4061905062209 Description: Gauge pin, single, 6.81 mm, ±0.001 mm, length 50 mm Category: Gauge pins / Messstifte ECLASS: 21170231 Facts Diameter: 6.81 mm Length: 50 mm Accuracy (tolerance): ±0.001 mm Weight: 0.018 kg Special features Material: Special steel Version: Workshop execution Story trigger: end dimension checks Pack: single piece delivery FAQ What is the intended use for this gauge pin? The pin is intended for precise end‑dimension verification and final size checks; the gauge pin M323.681 is suitable for routine inspection of mating bores and end‑mass measurements. How does the ±0.001 mm tolerance affect inspection decisions? A ±0.001 mm tolerance provides a tight acceptance band, enabling clear pass/fail decisions for critical fits and reducing uncertainty in quality control. Is the material suitable for repeated use in a production environment? Yes; the pin is made from special steel and supplied in a workshop execution to withstand frequent insertion and provide sustained dimensional stability. Can this pin be used in existing plug‑gauging fixtures? The cylindrical form and the 50 mm length make it compatible with typical plug‑gauging holders and bench fixtures used for end‑dimension checks. How should the pin be handled to maintain accuracy? Handle the pin with clean, dry hands or gloves, avoid impacts and store it in a protected place; regular visual inspection for wear will help preserve the specified ±0.001 mm performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.82mm Gauge Pin Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop-grade robustness and sub-micron accuracy: the Metav IndustryLine gauge pin combines 6.82 mm nominal diameter, ±0.001 mm tolerance and a 50 mm length to simplify end-dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.682 — single precision gauge pin, 6.82 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.682 is a single precision measurement pin designed for reliable end-dimension checks in workshop inspection and bench measurement tasks. Single precision gauge pin 6.82 mm Tolerance ±0.001 mm for high accuracy 50 mm length with workshop design Precision that supports repeatable end measurements The workshop-grade pin is manufactured to a tolerance of ±0.001 mm, which places it in the high-precision segment of plug and gauge pins intended for critical end-dimension verification. With a nominal diameter of 6.82 mm, the pin provides a stable reference for pass/fail checks, go/no-go tests and comparative inspection tasks. The tight tolerance reduces measurement uncertainty and streamlines decision-making in quality control processes, delivering a quantifiable improvement in first-time acceptance rates. Robust construction for demanding inspection routines Made from special steel and executed as a workshop version, this pin is designed to withstand repeated handling and routine use on the shop floor. The 50 mm length offers sufficient reach for most bore and internal feature checks while maintaining easy handling and positioning. Low mass (approximately 0.018 kg) ensures comfortable manipulation during serial checking. The combination of resilient material and compact geometry supports high repeatability and predictable wear behaviour, which in turn preserves measurement stability over many cycles. Practical integration into quality workflows Marked and traceable identification simplifies stockkeeping and process documentation; the pin is supplied under article number M323.682 and can be integrated into existing gauging sets or fixture checks. For workshops and suppliers that require consistent end measurements, the pin serves as a reliable master for comparative checks and functional gauging. If a specific fit or set configuration is required, Metav IndustryLine options are compatible with standard inspection protocols and can be combined with complementary pins to cover adjacent diameters. Speak with Metav Werkzeuge in Emmerich for tailored advice or a quotation for the Metav IndustryLine gauge pin M323.682 to ensure the right-fit solution for tight tolerance end checks Technical data Article number: M323.682 GTIN: 4061905062216 Brand: Metav IndustryLine Data Diameter: 6.82 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.018 kg Special features Material: Special steel Workshop execution Single gauge pin Application: end-dimension checks Category: Gauge pins FAQ What is the primary use of this gauge pin? The gauge pin is intended for precise end-dimension checks and go/no-go style verification of bores and internal features in workshop and inspection settings. What does the tolerance ±0.001 mm mean in practice? A tolerance of ±0.001 mm signifies a very tight geometric control of the pin diameter, allowing consistent comparative measurements with minimal measurement uncertainty. Is the pin suitable for routine bore inspection? Yes, the 6.82 mm single gauge pin is suitable for routine bore and fit checks and can be used as a reference in serial inspection tasks. What material is the pin made from? The pin is made from special steel, specified for durability and consistent performance in workshop conditions. How is the product identified for traceability? The item is identified by article number M323.682 and GTIN 4061905062216 for clear traceability and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.83mm Gauge Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
The combination of ±0.001 mm accuracy, a 6.83 mm diameter and a compact 50 mm length ensures reliable end‑dimension checks in workshop environments; the robust special steel construction supports repeatable use and long service life. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 6.83 mm, ±0.001 mm — Metav IndustryLine (precision gauge pin, 50 mm length) Gauge pin, single, 6.83 mm, ±0.001 mm, length 50 mm for precise verification of end dimensions in fixtures and inspection setups Workshop version for robust daily use Diameter 6.83 mm with ±0.001 mm accuracy Length 50 mm in special steel Optimised for end‑dimension verification Accurate control for end‑dimension inspection The compact precision pin delivers a defined measuring datum for end‑dimension checks where tight tolerances matter. With a nominal diameter of 6.83 mm and a certified tolerance of ±0.001 mm, the pin is designed to provide repeatable positioning in go/no‑go assemblies and fixture controls. The fine tolerance reduces uncertainty when establishing reference points, so measurement chains remain reliable and downstream rework is minimised. This level of precision supports efficient quality control routines and aids in documenting compliance with production specifications. Built to withstand workshop handling Made from special steel and configured as a workshop version, the pin balances hardness and wear resistance for frequent use on the shop floor. At 50 mm overall length and a mass of 0.018 kg, the component is compact yet substantial enough to avoid unwanted flex during insertion and removal. The physical design simplifies handling in jigs and manual gauges, while the material choice helps maintain the defined diameter under typical contact conditions. The result is a durable tool for everyday inspection tasks that keeps maintenance effort low. Practical integration into inspection processes The gauge pin is ideal as a reference element in plug‑gauges, fixture checks and assembly verification. Marking and traceability are facilitated by the SKU M323.683 and GTIN 4061905062780, which support inventory control and documentation in regulated workflows. As a simple, single‑piece measuring element, it reduces setup complexity and pairs readily with datum plates or gauge blocks for quick comparative checks. The design focuses on functional clarity: a minimal interface that shortens measurement cycles and helps maintain throughput in production and QA stations. For tailored advice on integrating this Metav IndustryLine gauge pin into inspection routines, contact Metav Werkzeuge in Emmerich for application support and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.683 GTIN: 4061905062780 eClass: 21170231 Facts Diameter: 6.83 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.018 kg Special features Material: special steel Workshop version Story trigger: end dimensions Category: gauge pins FAQ What level of accuracy does the gauge pin provide? The gauge pin (Metav IndustryLine, SKU M323.683) is specified at ±0.001 mm, making it suitable for high‑precision end‑dimension verification. For which applications is this pin best suited? This single gauge pin is intended for end‑dimension checks in fixtures, plug‑gauge assemblies and quick inspection routines where a defined reference diameter is required. How does the material affect performance? Constructed from special steel, the pin combines wear resistance and dimensional stability to maintain the 6.83 mm datum during repeated use. Can the pin be used with gauge blocks and datum plates? Yes, the pin integrates easily with gauge blocks and datum plates to form a simple reference system for comparative measurements and fixture checks. How is traceability supported for production records? Identification via SKU M323.683 and GTIN 4061905062780 enables clear tracking in inventory and inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.84mm Gauge Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade construction, ±0.001 mm tolerance and a compact 6.84 mm diameter for reproducible end‑measure checks; supplied ready for secure transport in a protective case. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for any application guidance. Test pin M323.684 — gauge pin, 6.84 mm diameter with ±0.001 mm tolerance The Test pin M323.684 is a workshop-grade gauge pin designed for precise end‑dimension checks and fixture verification in machining and inspection environments. Workshop-grade design for robust use Diameter 6.84 mm with ±0.001 mm accuracy Supplied in protective transport case Precision that supports repeatable end‑measure checks The pin delivers a tolerance of ±0.001 mm (1 µm), providing a reliable reference for critical end‑measure inspections where even small deviations cause rework. With a nominal diameter of 6.84 mm and a 50 mm length, the component functions as a stable datum for fixture setting, plug checks and comparative gauging. Made from special steel, the pin maintains dimensional stability under normal workshop temperatures and handling, which reduces uncertainty during routine quality control. The tight tolerance shortens decision cycles on go/no‑go assessments and supports higher throughput by reducing the need for repeated measurements. Built for workshop use and protected in transit Designed as a workshop‑execution tool, the gauge pin resists common handling stresses while remaining easy to store and identify. The protective transport case supplied with the pin safeguards the reference surface and edge geometry during transport and prevents inadvertent knocks that would compromise accuracy. At just 0.018 kg, the pin is lightweight for convenient use within fixtures and jigs but substantial enough to register securely in mounted setups. This robustness reduces downtime caused by tool damage and keeps inspection routines flowing in busy production areas. Simple integration into inspection workflows and traceability Identification and stock management are straightforward thanks to the clear SKU and identifiers, enabling rapid replacement and inventory control. The compact geometry and standardised tolerance make the pin compatible with common fixture designs and precision mandrels used in workshop metrology. As a result, measurement processes gain consistency and inspectors can rely on a predictable reference when validating end dimensions or calibrating arrangements. The practical combination of special steel, compact dimensions and transport protection supports efficient quality assurance without complex handling procedures. For dependable end‑measure checks and fixture validation choose the Metav IndustryLine gauge pin M323.684 — contact Metav Werkzeuge in Emmerich for application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.684 GTIN: 4061905062797 Description: Test pin, single, 6.84 mm diameter, ±0.001 mm tolerance, 50 mm length Facts Diameter: 6.84 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.018 kg Special features Workshop‑grade design Material: special steel Supplied in a protective transport case Intended for end‑measure checks and fixture verification FAQ What accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.001 mm, making it suitable for high‑precision end‑measure checks and repeatable fixture validation. Is the pin suitable for use in fixtures and jigs? Yes, the workshop‑grade design of the M323.684 makes the pin well suited to fixture and jig applications where a compact, dimensionally stable reference is required. What material is the pin made from? The pin is manufactured from special steel, selected for dimensional stability and resistance to routine workshop handling. Does the product include protection for transport? The pin is supplied in a protective transport case to prevent damage during handling and transit. How is the item identified for inventory and reordering? The product is listed under SKU M323.684 and GTIN 4061905062797, which simplifies stock control and reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.85mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Finish - Metav IndustryLine
Combining workshop-grade robustness, a 6.85 mm diameter and a tolerance of ±0.001 mm, this gauge pin provides a reliable reference for dimensional checks and fixture set-up. Order directly via Metav Werkzeuge or consult our specialists for application advice and immediate availability. M323.685 Gauge Pin — 6.85 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A gauge pin (M323.685) engineered for precise end-measurements and go/no-go references in workshop and inspection environments Tolerance ±0.001 mm Diameter 6.85 mm for precise fits 50 mm workshop-length special steel Supplied in protective transport case Built for repeatable, measurable confidence This gauge pin delivers high repeatability through its close tolerance of ±0.001 mm, making it a dependable reference for batch inspection and fixture verification. In practical terms, that level of precision reduces measurement scatter in go/no-go checks and shortens decision time on conformity — a rational gain for production-control and quality assurance processes. Where tight fits and minimal clearance are critical, the pin functions as a stable datum that supports consistent assembly and reduces rework. Robust design for everyday workshop use Manufactured in special steel with a 50 mm shaft length, the component is specified as a workshop version, designed to withstand regular handling and transfer between bench, jig and measuring station. The 6.85 mm diameter is aimed at precise bore checking and plug-fit verification; the compact weight supports quick, single-hand placement without disturbing the workpiece. Supplied in a protective transport case, the pin remains protected against knocks and contamination during storage or transit, preserving measurement integrity over time. Integrates easily into inspection routines The pin is practical for end-measurements, plug gauges and fixture setting where a stable reference is required. Lightweight and compact, it simplifies repetitive checks and short setup sequences, which contributes to faster throughput and lower per-part inspection cost. Traceable identifiers such as the M323.685 SKU and GTIN facilitate inventory control and documentation in quality systems, while the modest mass supports handheld use and rapid repositioning during multi-point verification. Contact Metav Werkzeuge in Emmerich for availability, advice on integration and prompt dispatch of workshop-grade gauge pins from Metav IndustryLine Technical data Article number: M323.685 GTIN: 4061905058325 Manufacturer: Metav IndustryLine Facts Diameter: 6.85 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.018 kg Special features Material: Special steel Version: Workshop design Supply condition: Supplied in transport case Category: Gauge pin / test pin FAQ What measurement tasks is this gauge pin suitable for? The gauge pin serves as a precision reference for end-measurements, bore checks, fixture setting and go/no-go verification; it is intended for quick, repeatable dimensional checks in workshop and inspection contexts. What material is the pin made from? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance appropriate to regular workshop handling. Does the M323.685 arrive with calibration? The M323.685 is specified to a tolerance of ±0.001 mm; calibration status is not stated in the product data so calibration certificates are not included by default. How is the pin delivered and protected? The pin is supplied in a protective transport case, which preserves the surface and geometry during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.86mm Test Pin Length 50 mm ±0.001 mm, Workshop Version - Metav IndustryLine
Take advantage of high repeatability, tight tolerance and a robust workshop design to secure reproducible end-dimension checks. The compact, 50 mm length and ±0.001 mm accuracy combine for stable handling and reliable pass/fail evaluation—order the gauge pin directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.686 — Precision test pin, 6.86 mm ±0.001 mm (Metav IndustryLine) M323.686 gauge pin is a single-piece precision test pin intended for end-dimension checks and inspection tasks in machine shops and quality control. High-precision ±0.001 mm tolerance Special steel with workshop finish 50 mm length for steady handling Delivered in a protective transport case Assured dimensional control for inspection and production The test pin delivers a ±0.001 mm tolerance on a 6.86 mm diameter, providing a measurable improvement in go/no-go evaluation and ending corrective rework cycles. As a hardened measuring pin, it functions as a fixed reference for bore and end-mass checks, enabling clear go/no-go decisions and rapid recording of conformity. The defined tolerance reduces uncertainty in inspection, supporting tighter process control and consistent production outputs. Durable construction that simplifies daily handling Manufactured from special steel and supplied in a workshop version, the pin resists wear on contact surfaces and maintains dimensional stability under routine use. The 50 mm length gives a favourable ratio of reach to rigidity, making single-handed handling straightforward while reducing the risk of bending during measurement. Supplied in a protective transport case, the component arrives ready for use and protected in transit, helping to preserve calibration and surface integrity. Practical applications and traceable measurement routines This precision pin suits metrology benches, fixture set-ups and end-of-line checks where repeatable reference dimensions are required. Its compact form is ideal for bench inspection and assembly jigs, while the robust finish supports everyday shop use. The low mass (approx. 0.018 kg) and compact geometry make the item easy to store and position within fixtures, contributing to fast, reproducible checking routines and less handling time between measurements. For consistent inspection outcomes, contact Metav Werkzeuge in Emmerich to request the Metav IndustryLine M323.686 gauge pin or to discuss technical suitability for specific bore or end-dimension applications. Technical Data Article number: M323.686 GTIN: 4061905058332 Manufacturer: Metav IndustryLine Facts Diameter: 6.86 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.018 kg Special features Material: special steel Workshop version (robust finish) Delivered in protective transport case Intended use: end-dimension checks / inspection FAQ What tolerance does this gauge pin offer? The M323.686 gauge pin provides a tolerance of ±0.001 mm, making it suitable for high-precision end-dimension checks in workshop environments. Which material is used for the test pin? The test pin is made from special steel and finished as a workshop version to improve wear resistance during routine inspection use. Is the pin suitable for fixture and jig set-ups? Yes; the 50 mm length and compact geometry of the M323.686 make it well suited for fixture mounting and repeatable positioning in assembly and inspection jigs. How is the gauge pin delivered to protect the measuring surface? The pin is supplied in a protective transport case to avoid damage in transit and to help maintain the measuring surface until use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.87mm Gauge Pin ±0.001mm Length 50mm Workshop Version Plastic Case - Metav IndustryLine
Taking advantage of a compact, workshop-ready design combined with ±0.001 mm accuracy and a 6.87 mm diameter delivers reproducible reference measurements for assembly and inspection tasks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.687 — 6.87 mm ±0.001 mm, 50 mm length (Metav IndustryLine) A precision Gauge pin M323.687 intended for dimensional checks and reference measurements in workshop and inspection environments High-precision diameter 6.87 mm ±0.001 mm Hardened special steel construction Length 50 mm for stable reference measurements Delivered in protective case for transport Reliable tolerance control for consistent inspection results The core advantage of this checking pin is its ±0.001 mm tolerance, which supports tight dimensional control in repetitive inspection processes. Such high accuracy reduces measurement uncertainty during go/no-go and reference checks, ensuring components conform to drawing tolerances. The small form factor and consistent diameter make the pin suitable as a reference gauge in fixture set-ups and bench inspections, where repeatability and traceable sizes matter. The precision specification is particularly beneficial when replacing worn pins in modular gauges or when confirming final bore sizes during assembly. Robust material and workshop design for everyday use Manufactured from special steel and offered as a workshop version, the pin balances wear resistance with practical handling. The material choice provides surface hardness and dimensional stability under regular use, while the compact 50 mm length keeps the tool rigid for short-span measurements. The workshop styling prioritises durability and straightforward insertion and extraction from bores or fixture housings. This combination lowers lifecycle costs by extending service intervals and reducing the need for frequent replacements. Practical application in quality control and assembly As a dedicated reference element, the pin performs well in batch inspection, fixture set-up and tolerance verification tasks. Use of a standardised diameter such as 6.87 mm simplifies inventory and reduces set-up time when swapping between similar gauges or modular fixtures. The component integrates readily into manual and semi-automated processes, serving as a tactile standard for quick pass/fail checks or for establishing datum points in small assemblies. Its compact dimensions make it suitable for confined measuring positions where larger gauges would be impractical. Protected delivery and handling facilitate safe storage Delivery in a protective case mitigates transport damage and preserves the pin’s calibre right up to point-of-use. The case supports organised storage, keeps reference surfaces free from contamination, and helps maintain the specified tolerance through reduced handling wear. For workshops that require simple logistical handling, the packaged format eases stock management and ensures that the tool is inspection-ready immediately upon retrieval from inventory. For precise reference elements from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability for production and inspection tasks or to request an exact-match replacement pin Technical Data Article number: M323.687 GTIN: 4061905058349 Weight: 0.018 kg Material: Special steel Core specifications Diameter: 6.87 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Special features Workshop version Delivered in protective case for transport Single-piece supply FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.687 is specified with an accuracy of ±0.001 mm, suitable for tight inspection tasks. Which material is used for the pin and what does it mean in practice? The pin is made from special steel, which offers enhanced wear resistance and dimensional stability for workshop and inspection use. Is the pin suitable for fixture set-ups and modular gauges? Yes, the 50 mm length and consistent 6.87 mm diameter make the checking pin well suited for fixture set-ups and modular gauge applications. How is the gauge pin supplied to ensure protection? The checking pin is supplied in a protective case to prevent damage during transport and storage, preserving the specified tolerance. Can this pin be used for repeated go/no-go checks in production? The M323.687 gauge pin is designed for repeated reference and go/no-go checks in production environments where tight tolerances are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.88mm Gauge Pin Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Taking advantage of the combination of ±0.001 mm tolerance and special steel construction delivers repeatable end-size verification and reliable in-process controls; the compact 6.88 mm pin with a 50 mm shank ensures secure handling in workshop environments. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.688 — single precision measuring pin, 6.88 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Gauge pin M323.688 is a single precision measuring pin designed for end-dimension checks and inspection tasks in workshop and quality‑control settings. Workshop design for robust use Diameter 6.88 mm for end-size measurement Tolerance ±0.001 mm for high precision Length 50 mm made from special steel Reliable accuracy for process control The compact measuring pin offers a tolerance of ±0.001 mm, enabling high-confidence pass/fail checks and dimensional spot checks during production. Such fine accuracy reduces rework and limits scrap rates by making deviations immediately detectable; the specification is suited to gauging tasks where micrometric differences determine component acceptance. By combining a defined diameter with a stable length, the pin provides a repeatable reference that supports both bench inspection and fixture-based verification processes. Emphasis on measurable outcomes and process stability makes this tool a practical choice for quality‑driven operations. Durable design that withstands workshop use Constructed from special steel and specified as a workshop execution, the measuring pin balances toughness with surface integrity. The robust material choice resists wear from repeated seating and extraction, preserving the 6.88 mm diameter and the 50 mm usable shank over many cycles. A solid single‑piece geometry reduces the risk of deformation under normal handling and ensures consistent contact with mating bores and faces. This durability minimises downtime for replacement and supports a steady inspection rhythm on the shop floor, where tools must deliver performance without frequent adjustment. Practical fit for quality inspection routines Integration of the pin into standard inspection jigs or portable gauging sets is straightforward owing to its defined dimensions and compact form. The gauge pin serves well for end‑dimension verification, go/no‑go seating checks and dimensional benchmarking during set‑up. Its small footprint and precise specification assist in creating clear inspection protocols: fixed limits, documented measurement steps and traceable results. As a measured tool for routine checks, it contributes to faster decision making in production and supports documented quality control pathways that reduce ambiguity in acceptance criteria. Contact Metav Werkzeuge in Emmerich to discuss suitability of the Metav IndustryLine gauge pins for specific inspection tasks or to arrange a procurement consultation; eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data Article number: M323.688 GTIN: 4061905058356 SKU: M323.688 Dimensions & tolerances Diameter: 6.88 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.018 kg Materials & features Material: special steel Workshop execution Accuracy class: ±0.001 mm FAQ What is the declared tolerance of this measuring pin? The Metav IndustryLine gauge pin M323.688 is specified with a tolerance of ±0.001 mm for precise end‑size verification. Which materials is the pin suitable for checking? The pin serves as a dimensional reference and is suitable for inspection of machined components across common workshop materials; the M323.688 itself is manufactured from special steel for wear resistance. How is the gauge pin typically used in inspection? The measuring pin is inserted as a reference into bores or used as an end‑stop to verify nominal diameters and seating; M323.688 is intended for quick pass/fail checks and repeatable bench measurements. Is this product part of a branded range suitable for industrial quality control? Yes — the M323.688 belongs to the Metav IndustryLine range, designed for practical workshop and quality‑control applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.89mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micron-level tolerance, compact nominal diameter and a robust workshop design for repeatable end-dimension checks; order via Metav Werkzeuge or request advice from our consultants. Test pin M323.689 — Gauge pin, 6.89 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) The Test pin M323.689 is a precision reference pin for end-dimension checks and fixture set-up in workshop inspection and assembly tasks. Micron accuracy ±0.001 mm Nominal diameter 6.89 mm 50 mm hardened length Workshop version, robust construction Accuracy that keeps production consistent A tolerance of ±0.001 mm on a 6.89 mm reference diameter delivers the level of precision required for critical end-measurements and tight-tolerance checks. Such fineness in tolerance reduces the need for rework and supports reproducible setups across shifts and machines. The high stability of the datum reduces measurement scatter, so inspections become a reliable pass/fail decision rather than a repeat exercise, improving throughput and process capability. Built for daily workshop handling The workshop configuration balances durability with handling convenience: the pin is manufactured from special steel and designed for robust use in routine inspection or as a fixed reference in jigs. With a 50 mm usable length and a low mass, handling is straightforward while maintaining stiffness where it matters. Delivered in a protective transport box, the item resists transit damage and arrives ready for safe storage or immediate use at the inspection bench. Simple integration into inspection workflows The test pin supports quick identification and inventory control through its clear article reference M323.689. As a compact reference gauge, it fits into established measuring sequences and tooling nests without adding complexity, shortening set‑up time and improving repeatability in dimensional checks. The combination of compact form and micron accuracy makes it suitable for batch spot checks, fixture alignment and small-batch quality control. For precision workshop measurement with the Metav IndustryLine test pin, contact Metav Werkzeuge in Emmerich for tailored advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.689 GTIN: 4061905058363 Manufacturer: Metav IndustryLine Facts Diameter: 6.89 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.018 kg Special features Workshop version Material: Special steel Delivered in transport box FAQ What is the dimensional tolerance of this test pin? The test pin is specified with a dimensional tolerance of ±0.001 mm, offering micron-level control for end-dimension checks. Which material is used for the pin? The pin is made from special steel, selected to provide the wear resistance and stiffness required for workshop use. Is this product suitable for fixture set-up and jig references? Yes, the compact design and ±0.001 mm tolerance make the item suitable as a reference gauge in fixtures and alignment tasks. How is the item supplied for transport and storage? The pin is supplied in a protective transport box to prevent damage during transit and to simplify safe storage in the workshop. How can the article be identified in inventory systems? The article reference M323.689 and its GTIN 4061905058363 allow straightforward recording and tracking in inventory systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.8mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of extremely fine ±0.001 mm tolerance, a compact 6.80 mm diameter and a short 50 mm length for reliable end‑measurement references in the workshop; order the gauge pin directly via Metav Werkzeuge or consult our specialists if required. Gauge pin, single, 6.80 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin, single, 6.80 mm is a compact precision pin for end‑measurements and fit checks in workshop and inspection contexts. Workshop version for robust use Diameter 6.80 mm with ±0.001 mm tolerance 50 mm overall length for compact components Special steel construction for lasting service Exceptional precision for micro components This precision pin delivers an outstanding ±0.001 mm tolerance on a 6.80 mm diameter, placing it in the Micro range of inspection tools. Such accuracy reduces uncertainty when verifying end dimensions and contributes to consistent process control. The fine tolerance is particularly valuable where small deviations cascade into assembly failure or rework; by using a stable, high‑resolution reference pin, inspection cycles become faster and measurement scatter is reduced, supporting reproducible quality checks in small‑part production. Robust workshop design and compact handling Constructed from special steel and finished for workshop conditions, the pin offers a compact 50 mm overall length that makes it easy to position in confined spaces and fixtures. The moderate mass (approx. 0.018 kg) and short form factor support steady manual handling and fast setup times on benches or in jigs. The workshop specification ensures the item withstands routine use without excessive maintenance, so inspection routines remain efficient and straightforward while preserving dimensional stability. Practical applications and measurable benefits Intended primarily for end measurements, the pin is suitable as a reference for bore checks, gauge setting and component fit verification where a precise plug dimension is required. Using a defined, single‑diameter reference reduces interpretation variance compared with improvised gauges, improving throughput and lowering scrap rates. The compact design integrates easily into existing metrology workflows and is a practical companion to micrometers and comparative gauges, enhancing overall reproducibility of critical checks. Choose the Metav IndustryLine gauge pin for uncompromising ±0.001 mm accuracy and request tailored advice from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific inspection tasks. Technical data Article number: M323.680 GTIN: 4061905062193 Brand: Metav IndustryLine Facts Diameter: 6.80 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.018 kg Special features Workshop specification Supplied individually Material: Special steel Intended use: End measurements FAQ What tolerance does the pin offer? The pin provides a tolerance of ±0.001 mm, suitable for high‑precision end measurements and tight fit verification. Is this pin suitable for bore checking and fit tests? Yes. The Metav IndustryLine gauge pin M323.680 is designed for end‑measurement tasks such as bore checking and component fit verification. What material is the pin made from? The pin is manufactured from special steel, chosen for dimensional stability and resistance to routine workshop wear. How compact is the pin for use in confined assemblies? With a 50 mm overall length and a 6.80 mm diameter, the pin is compact and well suited to confined fixtures and small components. Is the pin supplied individually or as part of a set? The item is supplied individually as a single gauge pin for standalone inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.90mm Gauge Pin Single ±0.001 mm Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial-grade ±0.001 mm accuracy, compact dimensions and robust workshop construction for reliable end‑measurement and repeatable inspection results. Order the item directly via Metav Werkzeuge or consult our advisors for application-specific guidance. M323.690 Test pin — precision gauge pin Ø 6.90 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) The M323.690 Test pin is a workshop‑grade precision gauge pin for end‑measurement and dimensional inspection tasks in mechanical workshops and quality control benches. High precision ±0.001 mm tolerance Diameter Ø 6.90 mm, length 50 mm Workshop-grade special steel construction Supplied in protective transport case Accuracy that minimises doubt in final inspection The core advantage of this gauge pin is its ±0.001 mm specification, which corresponds to a one‑micrometre tolerance and is suitable where sub‑millimetre consistency is required. Such precision supports tighter control limits and reduces the need for corrective rework by providing a stable, measurable reference for bore checks, end‑measurements and comparative gauging. For routine quality assurance, the fine tolerance helps to detect minute deviations that would otherwise pass unnoticed with coarser references, improving process reliability and part conformity. Robust design made for everyday shop use Constructed in special steel and delivered in a protective transport case, the pin combines dimensional stability with practical handling. At 50 mm length and Ø 6.90 mm, the geometry is compact and easy to position in fixtures or measuring stands; the light weight aids fast handling during repetitive checks. The workshop‑grade finish resists typical wear from contact measurements and keeps the reference geometry consistent over many cycles, which translates directly into longer service intervals and lower replacement frequency for inspection tools. Seamless integration into metrology workflows As a single‑piece gauge pin, the item is intended for straightforward application in end‑measurement, plug checks or as a reference for go/no‑go assemblies. The simple geometry minimises setup time and adapts to standard inspection jigs, allowing measurement technicians to maintain throughput without complex fixtures. The compact form factor also supports mobile inspection tasks on the shop floor, where a quick, repeatable reference improves decision speed. The clear specification and supplied protective case improve traceability and storage, supporting orderly calibration and inventory routines — the M323.690 fits naturally into established metrology procedures. Secure the Metav IndustryLine M323.690 from Metav Werkzeuge to standardise inspection routines — contact the Emmerich team for application advice and delivery details Technical data Article number: M323.690 GTIN: 4061905058370 Label: Test pin, single, 6.90 mm, ±0.001 mm, length 50 mm SKU: M323.690 Weight: 0.019 kg Material: Special steel Diameter: 6.90 mm Length: 50 mm Accuracy: ±0.001 mm Category: Gauge pins Facts Diameter: 6.90 mm Length: 50 mm Weight: 0.019 kg Tolerance: ±0.001 mm GTIN present: 4061905058370 Special features Workshop execution Supplied in protective transport case Suitable for end‑measurement and bore reference Compact, easy to handle FAQ What tolerance can be expected from this gauge pin? The M323.690 gauge pin is specified with a tolerance of ±0.001 mm, offering a one‑micrometre band for high‑precision reference checks. Which material is used for the pin? The pin is made from special steel in a workshop‑grade finish to withstand routine contact measurements and maintain dimensional stability. How is the product delivered for transport and storage? The gauge pin is supplied in a protective transport case, ensuring secure handling and safe storage between uses. Is the pin suitable for end‑measurement and plug checks? Yes, the geometry and tolerance of the M323.690 make it well suited to end‑measurement, plug checks and short‑range bore references in workshop inspection routines. Can the M323.690 be included in routine calibration cycles? The compact and well‑specified nature of this gauge pin allows it to be integrated into regular calibration and inventory procedures to preserve measurement traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.91mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micrometre repeatability, a precise 6.91 mm diameter and a compact 50 mm length to streamline dimensional checks in the workshop; order the gauge pin directly via Metav Werkzeuge or contact our consultants for further advice. Gauge pin M323.691 — gauge pin with 6.91 mm diameter and ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.691 is a single, high‑precision inspection pin designed for end‑measurement and verification tasks in workshop metrology. Diameter 6.91 mm, tolerance ±0.001 mm Length 50 mm for compact measuring setups Workshop‑grade design for robust daily use Made from high‑grade special steel Ensure production accuracy with sub‑micrometre repeatability A measuring element with a tolerance of ±0.001 mm provides the kind of repeatable result required where tight fits and narrow clearances determine assembly quality. The small diameter of 6.91 mm and the 50 mm length mean the component is easy to position in fixturing and measuring jigs, reducing setup time and cumulative error. The form stability of a precision gauge pin converts dimensional capability into traceable results, supporting consistent in‑process verification and quality assurance workflows. Workshop durability and material choice that supports reliability Constructed from special steel, this inspection pin balances hardness with corrosion resistance appropriate for everyday use in a workshop environment. The workshop version specification indicates components and finishing chosen to withstand handling, while still preserving measuring faces necessary for accurate readings. The material choice limits wear during repeated insertion and extraction cycles, so calibration intervals are extended and maintenance effort is reduced, which benefits throughput and uptime in small to medium‑sized production settings. Practical use: where the measuring pin improves process control As a single inspection element, the measuring pin is intended for plug and end‑face checks, go/no‑go verification in gauge blocks or nest fixtures, and spot checks during assembly. The compact geometry permits access to confined bores and recesses where larger gauges are impractical. When combined with systematic measurement routines, the pin helps to reduce scrap and rework by catching deviations at early stages; its simple form also makes it straightforward to clean, store and integrate into existing control plans without special adapters. For precision checks in the workshop, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin M323.691 and ensure reliable delivery from Emmerich — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: M323.691 GTIN: 4061905059308 Manufacturer: Metav IndustryLine Core data Diameter: 6.91 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Delivery form: single inspection pin Intended use: end‑measurement and dimensional verification Designation: workshop version FAQ What measuring tasks is this pin suitable for? The gauge pin M323.691 is designed for end‑measurement, plug checks and spot dimensional verification in workshop metrology, especially where a compact 50 mm length and 6.91 mm diameter are required. How precise is the inspection pin and what does the tolerance mean? The inspection pin carries a tolerance of ±0.001 mm, which represents the manufacturing and calibration allowance; this level of precision supports tight‑fit checks and repeatable go/no‑go assessments. What material is used and how does that affect longevity? Made from special steel, the M323.691 offers a balance of hardness and corrosion resistance that prolongs service life under routine handling and reduces wear on the measuring faces. Is the pin intended for heavy industrial use or workshop inspection? The specification as a workshop‑grade inspection pin indicates it is optimised for daily workshop and production‑line use rather than extreme heavy‑duty applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.92mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Ensure repeatable, shop-floor inspection with a compact gauge that combines micron-level accuracy and workshop durability: 6.92 mm nominal diameter, ±0.001 mm tolerance and 50 mm active length, supplied in a protective transport case. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.692 gauge pin — 6.92 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A precision M323.692 gauge pin designed for dimensional inspection and end-measure checks in metrology and quality‑control applications Workshop version for robust daily use Nominal diameter 6.92 mm with ±0.001 mm tolerance 50 mm hardened special-steel shaft Supplied in transport case for safe handling Precision that secures production tolerances A compact inspection pin with a 6.92 mm nominal diameter and ±0.001 mm tolerance delivers repeatable results where tight fits and end measurements matter. The declared deviation of ±0.001 mm (1 µm) positions this tool in the fine‑accuracy segment used for final checks, alignment gauges and verification fixtures. The close tolerance reduces measurement uncertainty during pass/fail inspections and supports consistent go/no‑go decision making on the shop floor, shortening cycle time by limiting rework. Built for the workshop: durability and handling benefits Produced in special steel and specified as a workshop version, the pin withstands regular handling and sliding contact in inspection routines. The 50 mm active length offers a practical balance between reach and stiffness for manual checks and fixture use, while the low mass supports quick positioning. Supplied in a protective transport case, the pin remains protected in transit and storage, preserving surface quality and dimensional integrity between uses — a benefit for repair shops and production lines alike. Practical integration into inspection workflows The compact design suits bench inspection, fixture integration and sample checks of mating parts. The straightforward geometry simplifies insertion into bores or sockets for end‑measure verification, enabling rapid comparative checks without complex set‑ups. Traceable ordering and identification via SKU make replenishment and inventory control efficient; the robust construction helps maintain consistent measurement behaviour across repetitive cycles, improving throughput and quality assurance. For secure end‑measure verification with Metav IndustryLine accuracy, contact Metav Werkzeuge to order the M323.692 gauge pin or to request application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.692 GTIN: 4061905059315 Label: Prüfstift, einzeln, 6,92mm, +/- 0.001 mm Länge 50 mm Numbers / Core technical data Diameter: 6.92 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Design / Special features Material: special steel Workshop version Supplied in transport case Category: gauge pin / inspection pin SKU: M323.692 FAQ What tolerance can be expected from this gauge pin? The Metav IndustryLine M323.692 gauge pin is manufactured to a tolerance of ±0.001 mm, enabling micron‑level end‑measure checks for tight fitments. What is the nominal diameter and length of the inspection pin? The inspection pin has a nominal diameter of 6.92 mm and an active length of 50 mm, suitable for bore and end‑face verification. Which material is used for the pin and what does that mean in practice? The pin is made from special steel; this provides wear resistance and surface stability in routine workshop inspection tasks, supporting long service life under regular handling. How is the product delivered to ensure protection? The gauge pin is supplied in a protective transport case to prevent damage during storage and transit and to keep the measuring surface in good condition. Can the M323.692 gauge pin be integrated into fixtures or jigs? Yes, the compact geometry and workshop design allow straightforward integration into inspection fixtures and jigs for repeatable dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.93mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from a combination of ±0.001 mm accuracy, a compact Ø 6.93 mm gauge, and a robust 50 mm length that supports reproducible end‑measurements in workshop environments; order the test pin directly via Metav Werkzeuge or ask our consultants if technical advice is required. M323.693 Test pin – 6.93 mm, ±0.001 mm | Metav IndustryLine workshop version The M323.693 Test pin is a precision end‑gauge designed for workshop inspection and dimensional control of mating and end faces. High precision: ±0.001 mm tolerance Gauge diameter Ø 6.93 mm for end measurements Workshop version with 50 mm overall length Supplied in protective transport case Precision where it matters For tasks that demand repeatable, traceable results, the ±0.001 mm tolerance places this gauge pin in the high‑precision category used for fine inspection and final acceptance checks. The very small tolerance reduces uncertainty when comparing mating components or setting up go/no‑go fixtures; the result is fewer reworks and tighter control of assembly runs. In practical terms, this level of accuracy helps maintain interchangeability in production where end‑dimensions are critical, and the rigid dimensions minimise measurement scatter during routine checks. Compact form for efficient workshop workflows The slender Ø 6.93 mm profile combined with a 50 mm overall length gives a compact handling advantage in confined measuring jigs and probing pockets. The workshop version is manufactured for frequent use: it fits tight spaces and is easy to seat in gauge blocks, fixture pockets or adapter plates. Supplied in a protective transport case, the pin can be carried between inspection points without risk of damage, which supports fast, reliable spot checks on the shop floor and reduces downtime during quality control rounds. Robust material and application focus Made from special steel, the pin emphasises dimensional stability and surface resilience under repetitive seating. Intended as an end‑measurement gauge for final sizes and reference checks, the component is suited to precision inspection routines, verification benches and fixture set‑ups. The single‑piece design and clear identification (SKU M323.693, GTIN 4061905059322) simplify inventory management and traceability in calibrated tool cabinets, while the workshop orientation indicates a balance of durability and handling convenience for everyday industrial use. Contact Metav Werkzeuge for tailored technical advice and to order the M323.693 test pin directly via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.693 GTIN: 4061905059322 Brand: Metav IndustryLine Facts Diameter: 6.93 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Workshop version (robust handling) Supplied in protective transport case Intended for end‑measurements and fixture use Single test pin, individual item FAQ What measurement tasks is this pin suited for? The M323.693 test pin from Metav IndustryLine is designed for precise end‑measurements, fixture set‑up and reference gauging in workshop inspection routines. What tolerance and repeatability does the pin provide? The pin offers a tolerance of ±0.001 mm, providing the repeatability required for tight dimensional verification and interchangeability checks. What material is the pin manufactured from? The M323.693 is made from special steel to ensure dimensional stability and durability under repeated use. Is the pin supplied ready for transport and workshop use? Yes, the test pin is supplied in a protective transport case suitable for workshop handling and safe transfer between inspection stations. Can the pin be integrated into fixtures and gauge assemblies? The compact Ø 6.93 mm diameter and 50 mm length make the pin suitable for use in gauge fixtures, adapter plates and probing pockets for routine quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.94mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm repeatability, a compact 6.94 mm diameter and a robust 50 mm length for consistent end‑measurement checks; supplied ready for safe transport. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for technical clarification. Gauge pin M323.694 — 6.94 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.694 is a single precision gauge pin for workshop inspection and end‑measurement tasks, designed for repeatable go/no‑go verification and fixture checking Workshop-grade execution High accuracy ±0.001 mm Diameter 6.94 mm, length 50 mm Supplied in protective transport box Precision that secures repeatable inspection results High measurement fidelity is the primary requirement for end‑of‑line checks and fixture verification. With a tolerance of ±0.001 mm, this gauge pin provides a quantifiable reference that reduces measurement uncertainty in routine inspection tasks. Such fine tolerance is suited to applications where small deviations affect assembly fit or functional clearance; the tight specification enables reliable pass/fail decisions and supports systematic quality control procedures. The compact diameter of 6.94 mm also makes it practical for confined bores and pins where standard sizes are unsuitable. Built for workshop conditions and safe handling Manufactured in special steel and delivered in a protective transport box, the component is oriented towards workshop use where tools are moved between benches and measuring stations. The 50 mm overall length gives sufficient engagement for many end‑measurement scenarios while keeping the component easy to handle and store. The workshop execution prioritises mechanical robustness and consistent geometry, allowing the pin to be used as a physical reference in jigs, benches and inspection fixtures without complex handling procedures. Practical integration into inspection workflows Traceability and clear identification are important for systematic quality processes; the gauge pin is listed under SKU M323.694 and carries a GTIN for inventory control. The single‑piece design simplifies tooling changes and minimises setup time in repetitive measurement cycles. For production environments that favour compact, high‑accuracy references, this gauge pin offers a straightforward way to validate bore sizes, dowel fits and end‑measurements within established inspection routines. Metav’s Emmerich quality filter underpins the supply chain, ensuring consistent delivery for small batches and replenishment orders Contact Metav Werkzeuge for a tailored quotation or technical consultation on the Metav IndustryLine gauge pin M323.694 (6.94 mm, ±0.001 mm); shipments are handled from Emmerich and technical queries are welcome at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.694 GTIN: 4061905059339 Material: Special steel Weight: 0.019 kg Diameter: 6.94 mm Length: 50 mm Tolerance: ±0.001 mm Facts Diameter: 6.94 mm Length: 50 mm Weight: 0.019 kg Tolerance: ±0.001 mm Special features Workshop execution Single precision gauge pin Delivered in a protective transport box Intended for end‑measurement and inspection tasks FAQ What accuracy does the gauge pin offer? The gauge pin M323.694 is specified to ±0.001 mm, making it suitable for high‑precision inspection and go/no‑go checks. Which material is used for this gauge pin? The gauge pin is manufactured from special steel, selected for stable mechanical properties appropriate to workshop inspection work. Is the gauge pin suitable for fixture checks and dowel verification? Yes; the form and tolerance of the M323.694 support fixture checking, dowel fits and other end‑measurement verifications in production and inspection routines. Does the product include protective packaging for transport? The component is supplied in a protective transport box to ensure safe handling and delivery to the workshop. How is the item identified for stock and procurement? Identification for ordering and inventory is via SKU M323.694 and GTIN 4061905059339, facilitating traceability in procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.95mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of tight diameter tolerance (6.95 mm ±0.001 mm), a 50 mm compact length and workshop-grade material for consistent end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application matching. Gauge pin, single, 6.95 mm ±0.001 mm (M323.695) — Workshop version A single gauge pin designed for precise end‑measurement and inspection tasks in workshop and inspection environments. Precision diameter 6.95 mm ±0.001 mm Compact 50 mm length for confined checks Workshop-grade special steel construction Single-piece pin for straightforward handling Reliable tolerance for repeatable inspection results The defining characteristic of this gauge pin is the diameter control of 6.95 mm with an accuracy of ±0.001 mm, which makes it suitable for high‑precision end measurements. Such tight tolerance reduces uncertainty when checking bore ends or mating features and supports consistent pass/fail decisions in quality control. The stated accuracy aligns the tool with applications that demand sub‑micrometre repeatability; the compact form factor keeps the measurement process efficient without sacrificing control. Designed for practical workshop use and durability Constructed from special steel in a workshop version, the pin balances hardness and toughness to withstand routine handling and frequent insertion into bores. The single‑piece design eliminates moving parts, simplifying maintenance and reducing wear‑related drift. At a mass of 0.019 kg and a length of 50 mm, the pin is easy to position and manoeuvre during manual checks, making it a pragmatic choice for inspection benches, jig verification and small‑batch production controls. How the gauge pin fits into inspection workflows This plug‑style gauge integrates seamlessly into established inspection routines for end measurements and dimensional verification. Use the pin as a reference mandrel for checking end sizes and concentricity during incoming inspection or final acceptance. Because the tool is compact and precise, it works well alongside hand gauges and bench metrology instruments, providing a deterministic physical reference that complements optical and electronic measuring systems. Practical advantages that support quality management A compact, high‑accuracy pin like this reduces rework by making dimensional discrepancies visible early in the process. The robust material choice and workshop configuration ensure longevity under normal shop conditions, which lowers total cost of ownership when compared with more delicate gauges. The product’s clear numerical specification — diameter, length and tolerance — supplies an objective basis for purchase and inclusion in inspection plans or control plans. Choose the Metav IndustryLine gauge pin M323.695 from Metav Werkzeuge in Emmerich for dependable end‑measurement checks and specification conformity in the workshop environment Technical data Article number: M323.695 GTIN: 4061905059346 Manufacturer: Metav IndustryLine Facts Diameter: 6.95 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.019 kg Special features Workshop version Material: special steel Intended for end measurement (endmasse) FAQ What is the exact diameter and tolerance of the gauge pin? The gauge pin has a diameter of 6.95 mm with a tolerance of ±0.001 mm, specified for precise end‑measurement checks. What material is the pin made from and how does that affect use? The pin is made from special steel; this provides a balance of hardness and durability suitable for routine workshop inspection tasks. Which applications is this pin intended for? Designed for end measurement and compact inspection duties, the pin is suitable for bore checks, mating feature verification and bench inspection routines. Is this a single‑piece or multi‑component gauge? This is a single gauge pin (single‑piece design), intended for straightforward handling and reduced maintenance complexity. What is the product SKU for ordering or documentation? The SKU for ordering and catalogue reference is M323.695 (Metav IndustryLine). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.96mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy, compact form and workshop-ready protection for reliable spot checks and fixture setting. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.696 – Single test pin, 6.96 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measurement and inspection tasks in workshop environments, supplied as a single, transport‑protected test pin. High precision ±0.001 mm tolerance Diameter ground to 6.96 mm for tight fits 50 mm length for compact measurement setups Workshop version with transport case included Precision that meets tight tolerance requirements The M323.696 gauge pin is manufactured to an accuracy of ±0.001 mm, enabling repeatable end‑measurement checks where micro‑clearances matter. A ground diameter of 6.96 mm and a compact length of 50 mm reduce geometric variation in fixtures and allow quick verification of bore sizes and plug fits. The finely controlled tolerance supports efficient quality decisions in inspection loops and minimises rework cycles by providing a clear, objective check against nominal dimensions. Workshop-ready design for routine inspection tasks Produced as a workshop version, this single test pin streamlines everyday measurement tasks on the shop floor. Its compact form and low mass (0.019 kg) make handling straightforward during quick-pass checks or when used in measurement jigs and simple comparators. The supply in a protective transport case keeps the pin secure between uses and reduces the risk of handling damage, which helps to maintain measurement integrity across repeat operations. Material choice for consistent contact performance Constructed from special steel, the pin offers the surface stability expected of precision gauge tools while remaining suitable for repeated contact with mating parts. The material selection focuses on maintaining geometric stability and wear resistance typical for test pins, which supports reproducible readings and long service life under normal workshop conditions. Regular inspection and correct storage in the provided case further extend the serviceable lifetime. Practical integration into quality workflows With a clear SKU and traceable identification, the test pin integrates readily into inventory and inspection systems. Its compact dimensions make it suitable for use in fixture set‑up, plug checking and comparative reference measurements. Where traceability is required, the product identifiers allow easy documentation within quality records to support audit trails and process control. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for application advice or delivery details — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and logistics. Technical data Article number: M323.696 GTIN: 4061905059353 Manufacturer: Metav IndustryLine Facts Diameter: 6.96 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg eClass: 21170231 Special features Material: Special steel Workshop version Supplied in transport case FAQ What is the declared tolerance for this gauge pin? The declared tolerance for the gauge pin M323.696 is ±0.001 mm, suitable for very fine dimensional checks. Which material is used for the test pin? The test pin is made from special steel, chosen to provide the surface stability and wear performance expected of precision gauge pins. Is the pin supplied with protective packaging? Yes, the pin is supplied in a transport case as part of the workshop‑grade delivery to protect the tool during storage and transport. What are the typical applications for this pin? Typical uses include end‑measurements, plug checks, fixture set‑up and quick verification of bore diameters in workshop inspection routines. How is the product identified for inventory or quality records? The product is identified by SKU M323.696 and GTIN 4061905059353, which can be recorded in inventory and inspection systems for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.97mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high-precision measurement, compact handling and robust workshop design to keep final-dimension checks fast and reproducible; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.697 — single precision pin, 6.97 mm diameter, ±0.001 mm Gauge pin M323.697 is a single precision pin for end-measure checks and dimensional verification in workshop environments Diameter 6.97 mm, ±0.001 mm tolerance Length 50 mm for depth and end-measure checks Special steel construction for durable performance Workshop version delivered in a transport case Stabilise quality control with micrometre-level accuracy The gauge pin M323.697 delivers a defined contact diameter of 6.97 mm with an exceptionally tight tolerance of ±0.001 mm, providing a reliable reference for final-dimension inspections and end-mass verification. This level of accuracy supports faster decision-making in production by making pass/fail assessments straightforward and traceable. The compact 50 mm length keeps handling easy while allowing access into confined features, so measurement cycles become more efficient without sacrificing repeatability. The result is reduced rework and a measurable improvement in first-pass yield. Streamline inspection workflows in the workshop Designed as a workshop version, the precision pin fits naturally into daily inspection routines—whether used as a standalone reference, in fixture checks, or as part of a pin set for comparative gauging. Delivered in a transport case, the pin stays protected between shifts and during transit, reducing the risk of damage that would compromise dimensional integrity. The clear, certified diameter and tolerance simplify documentation and auditor checks, enabling quicker in-process approvals and better coordination between production and quality teams. Robust material and compact handling for long service life Manufactured from special steel, the pin balances surface hardness and dimensional stability to withstand repeated contact checks typical of industrial use. Its light weight supports rapid placement and removal during sequential inspections, while the precise ground geometry ensures consistent seating in corresponding bores or reference faces. Combined with Metav’s distribution and quality control, this precision component contributes to dependable measurement routines across a wide range of machining and assembly tasks, offering confidence where exact end measures matter most. Contact Metav Werkzeuge for technical guidance on the M323.697 gauge pin or to request stock and shipping information: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich — info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: M323.697 GTIN: 4061905059360 Material: Special steel Facts Diameter: 6.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Workshop execution Delivered in a transport case Single gauge pin, individual item FAQ What nominal diameter and tolerance does the gauge pin have? The gauge pin M323.697 has a nominal diameter of 6.97 mm with a tolerance of ±0.001 mm for high-precision reference use. Is the pin suitable for end-measure checks and small-bore verification? Yes, the single precision pin M323.697 is intended for end-measure checks and verification of small bores or reference faces in workshop inspection routines. What material is used and how does it affect durability? The pin is made from special steel; this material provides dimensional stability and wear resistance appropriate for repeated contact measurements. How is the pin supplied for transport and storage? The M323.697 gauge pin is supplied as a single item in a protective transport case suitable for workshop handling and transit. Can the pin be integrated into existing fixture checks? The compact dimensions and precision tolerance of this pin make it suitable for incorporation into fixture and go/no-go checks where a defined reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.98mm Gauge Pin, Single, ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, compact length and durable construction for consistent end‑measurement results; order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.698 — 6.98 mm diameter, ±0.001 mm tolerance, 50 mm length The gauge pin M323.698 is a single hardened test pin designed for precision end‑measurement and go/no‑go checks in workshop and inspection environments. Workshop version for durable use Diameter 6.98 mm, tight tolerance Tolerance ±0.001 mm precision Special steel construction for wear resistance Precision that secures process results A compact, single‑piece test pin offers repeatable measurement performance where tolerances are critical. With a nominal diameter of 6.98 mm and a declared variation of ±0.001 mm, the pin is intended for high‑accuracy end‑measurement and alignment tasks in production control. The narrow tolerance reduces false rejections and supports faster decision cycles on the shop floor; traceable dimensional stability is therefore promoted throughout batch inspections. Technical users will appreciate that such accuracy minimises rework and contributes directly to improved yield. Robust workshop design for frequent handling Constructed from special steel and supplied in a workshop‑oriented finish, the pin tolerates everyday handling without rapid wear. The 50 mm overall length provides a balance between accessibility and stiffness, enabling reliable insertion into bores and against faces without excessive deflection. The hardened surface reduces the need for frequent replacement and extends tool life under repetitive contact conditions. Material choice and heat treatment ensure the component retains its geometry even in routine usage, supporting long service intervals. Practical applications and measurement contexts The test pin is suitable for end‑measurement, setting fixtures, checking bore fits and validating assembly positions in metalworking and toolmaking. Its compact format makes it appropriate for manual gauging stations as well as integration into jig and fixture audits. The combination of tight tolerance and workshop durability is particularly relevant for finishing operations and small‑batch quality checks, where reliable datum points are essential for repeatable setups and consistent part interchangeability. Traceability, identification and procurement Identification is simplified by the clear marking and stock references that accompany the component: SKU M323.698 and the global trade item number enable straightforward inventory control and procurement. The product is classified under gauge pins and is provided with weight and dimensional data for system entry. For buyers and quality engineers, the specification supports quick verification against inspection plans and facilitates ordering through established supply chains. Contact Metav Werkzeuge for tailored technical advice or to request immediate supply from Emmerich; request the gauge pin M323.698 for precision end‑measurements and fixture calibration. Technical data Article number: M323.698 GTIN: 4061905059377 Category: Gauge pins Label: Single gauge pin, 6.98 mm, ±0.001 mm, 50 mm Facts Diameter: 6.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Version: Workshop execution Accuracy class: ±0.001 mm SKU: M323.698 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.698 is specified with a tolerance of ±0.001 mm, intended for high‑precision end‑measurement tasks. Which material is used for the pin and how does it affect wear? Manufactured from special steel, the pin combines hardness with dimensional stability to reduce wear during frequent contact. Is the pin suitable for fixture setting and bore verification? Yes, the single gauge pin is designed for fixture calibration, bore checks and end‑measurement applications in workshop and inspection settings. How is the component identified for inventory and procurement? The item is listed under SKU M323.698 and GTIN 4061905059377, allowing direct entry into purchasing and stock systems. Can the pin be used in automated gauging stations? The dimensional stability and compact form factor make this pin suitable for manual and certain automated gauging setups where a solid datum is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.99mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme fit precision, robust special‑steel construction and compact 50 mm length for reliable end‑measure checks; order the (gauge pin, single, 6.99 mm ±0.001 mm) directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge pin, single — 6.99 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A precision gauge pin for end‑measure applications, designed as a workshop version for fast, repeatable checking of bore and shaft fits. Workshop version for industrial use Diameter 6.99 mm, high fit precision Tolerance ±0.001 mm Length 50 mm, compact handling Consistent, measurable precision for end‑measure checks The compact precision pin is made for repeatable fit testing where tight tolerances matter. Manufactured in a workshop design, the pin provides a controlled reference for end measurements and go/no‑go checks. With a stated tolerance of ±0.001 mm (1 µm) the component reduces uncertainty in assembly checks and inspection loops, enabling operators to document conformance to drawing limits quickly. This level of precision supports quality assurance processes and shortens decision cycles on acceptance or rework. Robust material and form for everyday industrial use A straight, ground shank in special steel ensures dimensional stability and resistance to wear in routine use. The choice of material combines toughness with the capacity for a fine surface finish, which stabilises contact behaviour during insertion and withdrawal. The compact 50 mm length and standard diameter make the pin easy to handle and store while delivering the surface integrity required for consistent fits. This design reduces the risk of false rejects caused by surface defects or deformation. Traceability and suitability for measurement workflows This precision pin is supplied as a single unit with identifying data suitable for inventory and inspection records. The item is well suited for integration into shop‑floor inspection benches and portable control sets where quick verification of bore or shaft dimensions is required. The clear specification — 6.99 mm diameter with ±0.001 mm tolerance — makes it straightforward to reference in work instructions and inspection reports, supporting transparent measurement processes and audit trails. Practical handling and benefits in the workshop Compact geometry and ergonomic handling mean fewer alignment errors during routine checks. The short length minimises lever action and bending under manual use, translating into more reproducible insertion and withdrawal operations. This improves throughput on repetitive tasks and lowers cumulative measurement uncertainty in production runs. The workshop specification balances durability and precision, offering reliable performance for maintenance, fixture setup and incoming inspection tasks. Contact Metav Werkzeuge for personalised advice on integrating this Metav IndustryLine gauge pin into existing inspection routines and to confirm available stock and delivery options Technical Data Article number: M323.699 GTIN: 4061905059384 SKU: M323.699 Facts Diameter: 6.99 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Material: Special steel Version: Workshop design Delivery: Single gauge pin Accuracy class: ±0.001 mm FAQ What is this gauge pin used for? This gauge pin is intended for end‑measure checks, verifying bore and shaft fits using a 6.99 mm reference pin from Metav IndustryLine (SKU M323.699). How tight is the tolerance and what does it mean in practice? The pin has a tolerance of ±0.001 mm, which equals 1 µm; in practice this enables very fine go/no‑go verification and consistent fit testing in production and inspection routines. Is the material suitable for repeated workshop use? Yes, the pin is made of special steel in a workshop design; the material and finish are chosen for durability and stable contact behaviour during repeated checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60 mm Limit Plug Gauge H7 DIN 2245 Hardened Gauge Steel, 1.3 kg - Metav IndustryLine
The combination of DIN 2245 conformity, hardened gauge steel and a precise H7 tolerance minimises inspection time and reduces the risk of false rejects in serial checking. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge M314.060 — 60.0 mm H7, DIN 2245 (Metav IndustryLine) The limit plug gauge M314.060 is a cylindrical inspection gauge for checking nominal bore diameters to H7 tolerance in production and incoming inspection. DIN 2245 standard, H7 tolerance Hardened gauge steel construction Precision diameter 60.0 mm Ideal for go/no-go checking Faster, measurable assurance for routine bore inspection A dedicated limit plug gauge provides an immediate go/no-go result that speeds up repetitive checks and simplifies operator decisions. Conforming to DIN 2245 and manufactured to the H7 fit, this gauge offers a clear, binary check that eliminates ambiguous readings and supports consistent process control. The direct checking method reduces measurement time compared with transfer measuring equipment and helps maintain a steady production throughput while ensuring that parts meet the specified tolerance band. Durable construction for long service life and repeatability Made from hardened gauge steel, the mandrel is engineered for wear resistance and dimensional stability. The material choice preserves the critical diameter under frequent use, so calibration intervals can be planned with confidence and downtime is minimised. The robust finish and solid construction deliver repeatable tactile feedback during go/no-go checks, which improves operator reliability and lowers the long‑term cost of ownership through fewer replacements and less rework. Practical fit for quality systems and workshop routines Designed for straightforward integration into standard inspection routines, the gauge is suited to shopfloor and quality-laboratory contexts where quick acceptance sampling is essential. The compact, single-diameter format supports rapid visual and tactile testing, allowing non-specialist staff to perform first-line checks without complex instrumentation. Results from these routine inspections can be documented in quality records to demonstrate compliance with internal process controls and supplier acceptance procedures, strengthening traceability within the inspection chain. For tailored advice or to secure immediate delivery of the limit plug gauge M314.060, contact Metav Werkzeuge for specification support and supply coordination: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M314.060 GTIN: 4054469121789 Standard: DIN 2245 Fit: H7 Material: hardened gauge steel Tariff code: 90173000 Core figures Diameter: 60.0 mm ECLASS: 21170218 Special features Hardened gauge steel construction DIN 2245 compliant H7 tolerance for nominal bore checking Category: Measuring pins; Gauges FAQ What does the H7 indication mean for inspection? The H7 designation defines the tolerance class for the nominal bore; the limit plug gauge M314.060 is manufactured to that class so it verifies whether a bore meets the specified upper and lower limits. Is the gauge suitable for production-line sampling? Yes, the M314.060 limit plug gauge is intended for rapid go/no-go checks in production and incoming inspection, providing quick pass/fail feedback without the need for precision measuring devices. How should the gauge be stored to maintain accuracy? Store the gauge in a dry, vibration‑free environment and use a protective sleeve or case when not in use; regular visual checks for wear are recommended to ensure continued dimensional reliability. Can this gauge replace a full metrology setup for final inspection? The limit plug gauge M314.060 is designed for functional acceptance testing and routine checks; it complements but does not replace full metrology equipment where detailed dimensional reports or traceable measurement histories are required. What materials is the gauge made from and why does that matter? The gauge is produced from hardened gauge steel, which provides high wear resistance and dimensional stability under repeated use—key attributes for maintaining consistent inspection results. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS3 - Metav IndustryLine
Take advantage of a hardened, lapped gauge in 60 mm nominal size with DIN 2250 conformity for reproducible reference checks; the robust Form C geometry and JS 3 tolerance provide consistent interchangeability in production control. Order the gauge directly via Metav Werkzeuge or consult Metav IndustryLine specialists for application advice. Gauge ring 60 mm (Form C) – hardened gauge steel, DIN 2250 — Metav IndustryLine The Gauge ring 60 mm serves as a precision reference for functional go/no-go checks and calibration tasks in workshop and inspection environments. Form C design for reliable seating 60 mm nominal diameter, DIN 2250 compliance Hardened and lapped gauge steel finish Tolerance JS 3 for consistent interchangeability Consistent reference for repetitive checking The ring acts as a stable master for simple, repeatable checks during batch inspection or setup tasks. Thanks to the JS 3 tolerance class and the 60 mm nominal dimension, the component provides a predictable limit reference for interchangeability checks and assembly controls. This leads to fewer measurement-related stops on the production line and a clearer pass/fail decision for operators performing functional or limit gauging. Durable finish and geometry for workshop use Manufactured from gauge steel that is hardened and lapped, the ring resists wear while retaining a precise seat with mating parts. The Form C profile ensures consistent contact and axial stability during insertion, reducing the influence of handling on the measurement result. The combination of hardening and lapping minimises surface damage and preserves the reference surface for prolonged service life under regular use. Standards-based design to simplify quality routines Compliance with DIN 2250 and DIN 286 integrates the component seamlessly into documented quality systems and inspection plans. The standardised design reduces the need for individual tolerance interpretation and supports traceable record-keeping for audits. For production engineers, this means straightforward specification in work instructions and fewer non-conformities related to ambiguous gauges. Practical identification and application details The part is supplied as a standardised gauge for functional checks and bench verification; it is identified on delivery with the manufacturer reference M313.060 and the GTIN for traceability. The compact 60 mm diameter and robust form factor make the ring suitable for bench-mounted checks, toolroom use and rapid go/no-go verification in assembly processes. The design focuses on one clear benefit per task: reliable, repeatable reference performance for everyday inspection routines. For precision-critical applications, request Metav IndustryLine items through Metav Werkzeuge — technical consultants can clarify suitability for specific checks and provide delivery details and calibration documentation. Technical data Article number: M313.060 GTIN: 4054469120874 Tariff code: 90173000 Data Nominal diameter: 60 mm Tolerance class: JS 3 Standards: DIN 2250, DIN 286 Special features Material: hardened and lapped gauge steel Design: Form C Identification: M313.060 FAQ What tolerance class does the ring meet? The ring meets JS 3 tolerance class, providing a standardised limit for interchangeability and assembly checks. Is the gauge ready for use on delivery? The Gauge ring 60 mm from Metav IndustryLine is supplied as a finished reference ring and is ready for functional go/no-go checks. Which standards apply to this gauge? Design and dimensions correspond to DIN 2250 and DIN 286, enabling straightforward integration into quality documentation. What material and surface treatment are used? Manufactured from gauge steel, the ring is hardened and lapped to ensure wear resistance and a stable seating surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com