Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
7.02mm Gauge Pin Single, ±0.001mm Tolerance, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of extremely tight tolerances and workshop‑grade durability to ensure repeatable end‑measurements; the combination of ±0.001 mm accuracy and a 7.02 mm diameter provides reliable reference points for precision inspection. Order directly via Metav Werkzeuge or consult our product advisers for integration advice. Gauge pin M323.702 — precision inspection pin Ø 7.02 mm, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.702 is a single, workshop‑grade inspection pin designed for precise end‑measurements and fitting checks in production and quality control contexts. Diameter 7.02 mm ±0.001 mm tolerance Length 50 mm workshop‑grade construction Made from special steel for wear resistance Supplied individually, traceable by GTIN Repeatable accuracy that supports quality control A tolerance of ±0.001 mm establishes the pin as a reference standard for tight inspection tasks. The controlled diameter of 7.02 mm reduces measurement uncertainty when used as an end‑stop, plug gauge or positional reference in fixtures. Such precision lowers rework rates and helps maintain process capability; when a measurement instrument or jig is referenced to a stable plug, the resulting checks become more reproducible. The compact mass also minimises thermal influence during short handling times. Robust construction for everyday workshop use Constructed from special steel and finished for workshop conditions, this inspection pin balances surface hardness with resistance to abrasion. The 50 mm length gives sufficient engagement for most fixture and seating applications while remaining manageable in handheld or fixture‑mounted checks. The workshop‑grade specification indicates a focus on durability and repeatability under frequent handling, making it suitable for routine inspection tasks on the shop floor. Simple traceability and inventory integration Each item is identified by SKU M323.702 and GTIN 4061905060267, enabling straightforward stock control and traceability in purchasing and quality documentation. The single‑item packaging suits targeted replacements or the gradual build‑up of gauge sets. As an inspection accessory, the pin integrates neatly with existing measurement routines and jigs, allowing rapid substitution without recalibration of downstream tooling. Designed to fit practical inspection workflows As a compact, high‑precision inspection pin, this product functions as a reliable reference for sizing, go/no‑go checks and alignment tasks. Its specification makes it well suited to small‑batch production, maintenance work and assembly verification where tight tolerances are required but space is limited. The result is fewer stoppages, clearer pass/fail decisions and a smoother inspection process overall. For workshop‑grade precision with ±0.001 mm repeatability, contact Metav Werkzeuge to order the Metav IndustryLine gauge pin M323.702 or to discuss batch supply and integration options Technical data Article number: M323.702 GTIN: 4061905060267 Manufacturer: Metav IndustryLine Facts Diameter: 7.02 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Material: special steel Workshop‑grade execution Single item delivery Category: gauge pins FAQ What is the manufacturing tolerance of this inspection pin? The tolerance is ±0.001 mm, specified for the gauge pin M323.702 from Metav IndustryLine. Is the pin suitable for fixture alignment and go/no‑go checks? Yes; the 7.02 mm diameter and tight tolerance make it suitable as an alignment or reference pin in fixtures and go/no‑go checks. What material is used for the pin and how does that affect wear? The pin is made from special steel, selected to provide wear resistance and stable surface properties under regular workshop use. Can the pin be added to a stock system using a barcode or GTIN? Yes; the item carries GTIN 4061905060267 and SKU M323.702 for straightforward inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.03mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial-grade accuracy ±0.001 mm, a precise 7.03 mm diameter and robust special steel for dependable inspection results; order the pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.703 — Precision gauge pin, 7.03 mm ±0.001 mm, length 50 mm (Metav IndustryLine) A gauge pin M323.703 designed for accurate bore checks, end‑dimension verification and workshop inspection tasks where tight tolerances are mandatory. Diameter 7.03 mm ±0.001 mm Length 50 mm workshop version Machined from special steel Delivered in a transport box Precision that reduces inspection uncertainty The solid construction and the ±0.001 mm specification ensure high repeatability during Go/No‑Go and bore verification tasks. As a compact inspection element, the reference pin provides a measurable standard that supports quality control procedures and reduces rework by delivering clear, verifiable results. The tight tolerance is particularly valuable in high‑precision jigs and fixtures where small deviations lead to costly rejects. Durable workshop construction for reliable handling Manufactured in a workshop version and machined from special steel, the pin resists everyday wear while keeping handling straightforward for production environments. The 50 mm length combines usefulness for blind and through‑hole checks with easy manipulation on the bench. Supplied in a transport box, the component remains protected during storage and transit, lowering the risk of surface damage that can affect measurement integrity. Streamlined inspection and integration into quality workflows As a compact inspection element, the test pin is suitable for serial checks, incoming inspection and fixture validation, helping to shorten measurement cycles and support consistent tolerances across production runs. The precise diameter of 7.03 mm and the stable material properties assist in maintaining traceable measurement routines and in aligning workshop processes with industrial quality demands. For precision inspection tasks, request the Metav IndustryLine gauge pin M323.703 from Metav Werkzeuge—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for application support and supply from our Emmerich location Technical data Article number: M323.703 GTIN: 4061905060274 Label: Gauge pin, single, 7.03 mm, ±0.001 mm, length 50 mm Facts Diameter: 7.03 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Material: Special steel Workshop version Delivered in transport box Category: Gauge pins FAQ What tolerance does the gauge pin offer? The gauge pin M323.703 is specified to ±0.001 mm, suitable for high‑precision inspection tasks. Which materials is the pin made from? The inspection pin is machined from special steel, chosen for stability and workshop durability. Is the pin supplied protected for transport? Yes, the item is provided in a transport box to protect the surface and ensure measurement integrity on arrival. For which inspection tasks is this pin intended? The pin is intended for bore checks, end‑dimension verification and fixture validation in workshop and production environments. How is traceability ensured for this product? Product identification is available via SKU M323.703 and GTIN 4061905060274 for inventory and traceability processes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.04mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from industrial‑grade repeatability thanks to the ±0.001 mm tolerance and the compact 7.04 mm diameter in a 50 mm working length; these characteristics support precise end‑measurements and reliable go/no‑go checks. Order the gauge pin directly via Metav Werkzeuge or request technical advice from our consultants. Gauge pin M323.704 — Single precision gauge pin, 7.04 mm ±0.001 mm (Metav IndustryLine) Gauge pin M323.704 is a single precision gauge pin designed for end‑measurement, ring and bore gauging, and workshop inspection tasks in industrial metrology. *Precision tolerance ±0.001 mm *Diameter 7.04 mm for end‑measurements *Length 50 mm, workshop grade *Manufactured from special steel Accuracy that secures reproducible inspection results A guaranteed ±0.001 mm tolerance (1 µm) positions this gauge pin in the high‑precision segment of workshop measuring tools. Such a fine tolerance reduces measurement uncertainty when used as a reference in comparative checks or when shimming for calibration tasks. The 7.04 mm nominal diameter provides a stable contact surface for bore and ring measurements, and the geometry minimises wobble during insertion. Presented as a single reference pin, it is well suited for precision testing jigs and pin gauges where repeatability across multiple checks is essential. Durable workshop design for everyday use The pin is produced from special steel, providing a balance of hardness and toughness for frequent handling and light‑impact use in a production environment. A 50 mm length gives a useful contact area without compromising rigidity; this dimension keeps deflection low and supports consistent contact pressure during inspection. The workshop execution underlines a practical finish and handling form that integrates into bench setups and verification trays, enabling straightforward placement in fixtures or test plates for rapid checks on machined components. Practical integration into quality workflows With a compact format and precise specification, the pin functions effectively as a reference element in sampling plans, first‑article inspection and in‑process checks. The clear SKU (M323.704) and GTIN allow straightforward traceability in inventory systems, and the small mass facilitates quick handling during multi‑station inspections. When combined with calibrated master gauges and certified measurement routines, this reference pin supports documented quality assurance processes and helps maintain consistent acceptance criteria across production batches. Request a quotation or technical consultation for the Metav IndustryLine M323.704 from Metav Werkzeuge; please quote SKU M323.704 when contacting via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: M323.704 GTIN: 4061905060281 Material: special steel Nominal diameter: 7.04 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Product type: single gauge pin Feature: workshop execution Facts Nominal diameter (mm): 7.04 Length (mm): 50 Tolerance (mm): ±0.001 Weight (kg): 0.019 GTIN: 4061905060281 Special features Single precision gauge pin High repeatability for end‑measurements Suitable for bore and ring gauging Compact format for fixture integration Workshop‑grade finish FAQ What is the diameter and tolerance of this gauge pin? The gauge pin has a nominal diameter of 7.04 mm and a tolerance of ±0.001 mm; this specification applies to the M323.704 gauge pin from Metav IndustryLine. For which applications is the pin suitable? This reference pin is suitable for end‑measurements, bore and ring gauging, jigs and fixtures, and general workshop inspection tasks where high repeatability is required. What material is used for the pin and how does it affect durability? The pin is manufactured from special steel, chosen to provide a balance of hardness and toughness for everyday workshop handling and low‑wear contact. How can the M323.704 be referenced in a quality system? Use the SKU M323.704 and GTIN 4061905060281 to record the item in inventory and inspection documentation; the pin’s tight tolerance supports traceable comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.05mm Gauge Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine ±0.001 mm repeatability with a 7.05 mm diameter and a 50 mm usable length to secure reliable end‑measurements in workshop inspection; order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.705 — single test pin, 7.05 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.705 is a single test pin designed for precise end‑measurements and go/no‑go checks in workshop and production inspection environments. Workshop version, hardened special steel Diameter 7.05 mm with ±0.001 mm tolerance 50 mm usable length for end‑measurements Supplied in transport box for secure handling Accurate end‑measurement that reduces rework and uncertainty The solid test pin delivers a ±0.001 mm tolerance at 7.05 mm diameter, providing measurable improvement in acceptance testing and inline checks. Such tight tolerance is beneficial where dimensional conformity is critical, since the reduced measurement scatter translates into fewer rejects and less corrective machining. The defined length of 50 mm ensures consistent reference during end‑face and bore alignment checks, helping to maintain production flow and inspection throughput. Robust workshop construction for everyday use Built as a workshop version from special steel, the pin is engineered to withstand routine handling and repeated contact while maintaining dimensional integrity. The material choice offers a balance between wear resistance and manufacturing precision, ensuring long service life under normal workshop conditions. At approximately 0.019 kg, the component is easy to position and manoeuvre during serial inspection without compromising stability. Fits seamlessly into inspection routines and fixtures The test pin is suitable for end‑measurements, alignment gauges and comparative checks within production and quality control setups. As a precision reference tool, it supports fast pass/fail decisions and can be integrated into simple fixtures or bench jigs. Traceability is supported through the SKU and GTIN, enabling clear inventory control and documentation for audit processes. Metav’s role as a European precision partner further ensures dependable supply and product consistency for industrial users. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for procurement advice or a tailored delivery solution: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M323.705 GTIN: 4061905060298 Manufacturer: Metav IndustryLine Key measurements Diameter: 7.05 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Material: special steel Version: workshop execution Packaging: transport box Intended use: end‑measurements and inspection FAQ What is the declared dimensional tolerance of this test pin? The test pin is specified with a tolerance of ±0.001 mm, ensuring high‑precision end‑measurements for inspection tasks. Which materials is the pin made from and how does that affect wear? Made from special steel, the pin combines dimensional stability with resistance to routine wear expected in workshop environments. Is the pin suitable for go/no‑go checks and fixture use? Yes — the gauge pin is intended for end‑measurements, go/no‑go checks and integration into simple fixtures for production inspection. How long is the usable measuring length of the pin? The usable length is 50 mm, providing a stable reference for end‑face and alignment measurements. How is the item delivered for safe handling and transport? The gauge pin is supplied in a transport box to protect the component during delivery and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.06mm Precision Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of factory-grade accuracy and a fine ±0.001 mm tolerance combined with a compact 50 mm form factor to shorten inspection cycles and reduce rework. The precise 7.06 mm nominal diameter and workshop-oriented design make this pin a pragmatic choice for repeatable bore checks and end‑mass verification. Order directly via Metav Werkzeuge or consult their technical team for specification matching. Gauge pin M323.706 — 7.06 mm, ±0.001 mm tolerance The gauge pin M323.706 is a single precision plug gauge designed for dimensional inspection and end‑mass checks in workshop and quality environments. Precision tolerance ±0.001 mm Nominal diameter 7.06 mm 50 mm length for compact handling Workshop specification for everyday use Measure with confidence: micrometre-level reproducibility The core advantage of this plug gauge is its high reproducibility, achieved through a tight ±0.001 mm tolerance that reduces ambiguity during go/no‑go or fit checks. For routine bore inspection and gauging tasks, the small form factor and exact diameter simplify comparison against nominal values, cutting decision time at the inspection bench. The direct consequence is fewer false rejects and a clearer trace of conformance in production records. Robust handling for frequent shop use Constructed from special steel and offered in a workshop configuration, the pin is sized for regular handling without compromising dimensional stability. The 50 mm active length gives adequate engagement for most small to medium bores while remaining easy to control by hand or fixture; the low mass supports fast manipulation during batch checks. This balance of size and material yields a durable measuring aid suited to daily quality routines. Traceability and inventory integration for quality systems Identification and logistics are supported by the explicit SKU and GTIN, enabling seamless entry into inventory systems and quality documentation. The single‑piece design makes storage and labelling straightforward, assisting in lot control and audit trails. Using a clearly specified plug gauge like this one helps maintain statistically meaningful inspection results and supports corrective‑action workflows when deviations arise. For shop floors seeking repeatable plug‑gauge checks, contact Metav Werkzeuge to request delivery details or a technical quotation for the M323.706 gauge pin. Technical data SKU: M323.706 GTIN: 4061905060304 eClass: 21170231 Numbers Diameter: 7.06 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Version: Workshop specification Configuration: Single gauge pin Storytrigger: end‑mass measurement FAQ What tolerance does this plug gauge provide? The M323.706 plug gauge is manufactured to a precision tolerance of ±0.001 mm, suitable for high‑accuracy bore checks and tight fit verification. Which applications suit this gauge pin best? This single gauge pin is intended for end‑mass measurement, bore inspection and dimensional checks in workshop and small‑series quality control tasks. What material is the pin made from and how does that benefit daily use? Made from special steel, the pin offers dimensional stability and resistance to routine handling, making it appropriate for repetitive inspection work in production environments. How can the product be referenced in inventory and documentation? Use the SKU M323.706 and GTIN 4061905060304 for unambiguous identification in procurement lists, inventory systems and quality records. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.07mm Test Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of high repeatability and micrometre-level tolerance to secure consistent end‑measurement results; the compact 50 mm length and workshop specification make this pin easy to handle in fixture set‑up and inspection benches. Order the item through Metav Werkzeuge or consult the team for application support. Gauge pin M323.707 (single) – 7.07 mm, ±0.001 mm, 50 mm by Metav IndustryLine The Gauge pin M323.707 is a precision reference pin designed for end‑measurement and workshop gauging, ideal for dimensional verification and fixture set‑up in production and inspection environments Workshop‑grade construction Tolerance ±0.001 mm Diameter 7.07 mm, length 50 mm Precision that reduces rework and speeds setup A solid reference pin with a diameter of 7.07 mm and an accuracy of ±0.001 mm provides a reliable datum for repeat checks and quick verification of end‑masses. The extremely narrow tolerance translates directly into fewer assembly rejects and less trial‑and‑error during machine set‑up: a consistent reference surface means faster alignment and reduced cycle time. As a precision reference pin, it integrates into measurement routines where micrometre accuracy is required and where reproducibility matters for quality control. Robust workshop design for dependable handling Manufactured in special steel with a 50 mm overall length, the pin combines physical stiffness with a compact form factor that resists bending in everyday workshop use. The workshop specification addresses practical handling: it is short enough to be manoeuvred by hand but long enough to engage confidently with most bores and seats used in fixture checks. The durable finish and solid construction help maintain dimensional stability over repeated use, reducing the frequency of replacements and supporting continuous production. Simple integration into inspection workflows As a single gauge pin, this item functions as a standard reference for end‑measurement tasks, aiding in go/no‑go checks, reference setting and comparative inspections on benches and in jigs. The clear numeric designation and available SKU simplify inventory management and traceability in the inspection process. Its compact size and high precision enable straightforward measurement with common metrology tools, supporting both rapid shop‑floor checks and documented quality procedures. For precise end‑measurement requirements, request the Metav IndustryLine gauge pin M323.707 via Metav Werkzeuge or contact the Metav consultants for application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.707 GTIN: 4061905060311 Label: Prüfstift, einzeln, 7,07mm, +/- 0.001 mm Länge 50 mm Core specifications Diameter: 7.07 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.019 kg Design & features Material: Special steel Workshop version Single gauge pin FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.707 is specified with an accuracy of ±0.001 mm, making it suitable for applications that demand micrometre‑level repeatability. What material is used for the pin? The M323.707 gauge pin is made from special steel and supplied as a workshop‑grade reference pin intended for robust everyday use. Which measurement tasks is this pin intended for? This single gauge pin from Metav IndustryLine is intended for end‑measurement, fixture setting and comparative verification where a precise cylindrical datum is required. How should wear be monitored and when should the pin be replaced? Inspect the pin visually and measure against a master or calibrated standard; if deviation exceeds the listed ±0.001 mm tolerance, the M323.707 pin should be replaced to maintain measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.08mm Gauge Pin Single ±0.001mm 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precision 7.08 mm diameter and ±0.001 mm tolerance combined with compact 50 mm length for reliable end‑measure verification; order the gauging pin directly via Metav Werkzeuge or ask our consultants if needed. Gauging pin M323.708 — 7.08 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauging pin M323.708 is a single‑piece precision end‑measure tool for dimensional checks and final size verification in workshop and inspection environments Precision diameter 7.08 mm, tolerance ±0.001 50 mm length, special steel construction Workshop design for robust daily use Supplied individually for exact end measurements Reliable accuracy for end‑measure verification The compact gauge delivers a 7.08 mm diameter with a tight ±0.001 mm tolerance, making it suitable for applications where repeatable final measurements are essential. This degree of precision reduces uncertainty in pass/fail checks and supports quality assurance workflows by providing a clear, verifiable reference. The pin’s nominal dimension is ideal for end‑measure tasks such as bore gauging, go/no‑go checks and plug verification, where a stable reference diameter shortens inspection time and improves throughput. Robust construction that endures daily workshop use Manufactured from special steel, the pin combines dimensional stability with resistance to everyday handling typical in production environments. At a length of 50 mm, the geometry keeps deflection low while offering sufficient engagement for many standard bore depths. The single‑item supply format ensures a clean reference for selective measurements and prevents cross‑contamination between tools. Lightweight handling and compact size facilitate fast positioning in fixtures and reduce operator fatigue during repetitive inspection cycles. Seamless fit into quality control processes Designed as a practical end‑measure implement, this pin integrates into visual inspection, go/no‑go stations and gauge sets without modification. The clear specification and catalogue identifiers simplify inventorying and traceability: SKU M323.708 and GTIN are available for procurement and stock control. Using a dedicated precision pin shortens set‑up times and lowers the incidental variability that can arise from improvised measurement aids, thereby supporting consistent production outcomes and faster acceptance of parts. Choose the Metav IndustryLine gauging standard for reliable end measurements — order the M323.708 from Metav Werkzeuge or request expert advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M323.708 GTIN: 4061905060328 Eclass: 21170231 Weight: 0.019 kg Facts Diameter: 7.08 mm Length: 50 mm Tolerance: ±0.001 mm Special features Material: Special steel Workshop version Supplied as single item Application: end measurements FAQ What level of precision does this gauge pin provide? The Gauging pin M323.708 offers a diameter of 7.08 mm with a stated tolerance of ±0.001 mm, suitable for fine end‑measure verification and repeatable inspection tasks. Which materials is the pin intended for during checks? As a dimensional reference, the pin is used to verify bore and pin sizes across a variety of workpiece materials; the tool itself is made from special steel for durability. Is the length suitable for typical bore checks? With a 50 mm length, the pin provides sufficient engagement for many standard bores while maintaining low deflection and easy handling in workshop inspection routines. How is the product supplied and identified for inventory? The item is supplied individually and can be ordered under SKU M323.708; the GTIN 4061905060328 aids catalogue and stock management. Can this pin be used in go/no‑go gauge sets? Yes, the pin’s precise diameter and tolerance make it suitable as a reference element within go/no‑go assemblies or inspection fixtures where end‑measure accuracy is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.09mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Taking advantage of the pin’s ultra‑fine tolerance and robust workshop execution ensures reliable end‑measure checks and repeatable inspection routines; combine ±0.001 mm accuracy with a 7.09 mm diameter and 50 mm length for precise dimensional control and order via Metav Werkzeuge for dependable supply and advice. M323.709 — Precision Gauge Pin (7.09 mm, ±0.001 mm, 50 mm length) M323.709 is a single, high‑precision gauge pin designed for dimensional inspection and end‑measure applications in workshop and quality‑control environments. Diameter 7.09 mm with ±0.001 mm tolerance Length 50 mm for compact inspection tasks Specialised steel for wear resistance Workshop version for robust daily use Exceptional measurement certainty for critical diameters The inspection pin provides a consistently defined reference thanks to its ±0.001 mm manufacturing tolerance and closely controlled diameter of 7.09 mm. For inspection and end‑measure routines where even submicron deviations matter, this pin functions as a reliable mechanical reference for go/no‑go checks, slot and bore verification, and comparative gauging. Manufactured from specialised steel, the pin maintains dimensional stability under normal workshop conditions, reducing wear‑related drift and supporting reproducible results across multiple cycles. The compact 50 mm length gives a stable contact area while remaining manageable for handheld use or fixture mounting, making it suitable for frequent in‑process inspections where traceable dimensional control is required. Designed for workshop durability and practical handling Supplied in a workshop edition, the single test pin balances fine tolerance with day‑to‑day robustness. The chosen material and surface finish resist routine handling wear, so the component retains its calibrated form over extended service intervals. At approximately 0.019 kg, the pin is easy to position and manoeuvre in inspection setups, yet substantial enough to avoid accidental bending during normal use. Its design supports fast comparison checks and quick insertion into test fixtures or locating bores, which minimises set‑up time and keeps inspection flow efficient. The construction is optimised for repeatability, allowing technicians to perform standardised dimensional checks with confidence in the mechanical reference. Integration into quality processes and inventory systems This gauge pin is delivered as a single item with a distinct SKU and GTIN for clear traceability within stock and quality systems. The compact form factor and defined tolerance make it straightforward to incorporate the pin into existing inspection plans and measurement routines, supporting consistent documentation of acceptance criteria in batch testing. As a precision mechanical reference, it complements other metrology tools and can be used wherever a physical diameter master is required for rapid verification. The combination of traceable identification, stable material properties and workshop suitability helps reduce measurement uncertainty and supports an auditable quality approach for production and maintenance workflows. Specify the Metav IndustryLine M323.709 gauge pin for critical end‑measure tasks and contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for ordering and technical guidance Technical Data Article number: M323.709 GTIN: 4061905061028 Category: Messstifte Facts Diameter: 7.09 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Material: Specialised steel Workshop version Single test pin delivery SKU: M323.709 FAQ What accuracy does this gauge pin offer? The M323.709 gauge pin is manufactured to an accuracy of ±0.001 mm, making it suitable for high‑precision reference and inspection tasks. What are the primary applications for this test pin? Intended for dimensional checks and end‑measure verification, the pin is used in workshops and quality‑control stations where a defined diameter reference is required. What material is used for the pin and why? The pin is made from specialised steel, chosen for dimensional stability and wear resistance under routine inspection conditions. How is the item identified for inventory and traceability? The product is listed under SKU M323.709 and GTIN 4061905061028 for clear tracking in stock and quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.10mm Gauge Pin Single, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm repeatability, a 7.10 mm nominal diameter and a robust special steel construction for dependable end‑measure verification; order the measuring pin directly via Metav Werkzeuge or ask our consultants if needed. Measuring pin M323.710 — 7.10 mm, ±0.001 mm (Metav IndustryLine) The Measuring pin M323.710 is a workshop‑grade gauge designed for precise end‑measure checks and plug‑type inspection tasks in production and inspection environments 7.10 mm nominal diameter Tolerance ±0.001 mm accuracy 50 mm overall length Workshop‑grade special steel Precision that secures final inspection results The M323.710 is engineered to deliver submicron stability at a nominal diameter of 7.10 mm, with a stated tolerance of ±0.001 mm. This level of accuracy converts directly into fewer false rejects and more reliable acceptance decisions during end‑of‑line checks. A measuring pin of this calibre reduces uncertainty when assessing bores, fitments and mating components by providing a fixed reference that is easier to repeat than many hand‑held comparators. The combination of tight tolerance and a defined 50 mm length keeps the contact conditions consistent, which is particularly important when measuring to fixed gauges or within fixtures. Durable design for everyday workshop use Built as a workshop execution tool, this gauge uses special steel to balance wear resistance with dimensional stability. The material choice ensures sustained contact integrity under regular handling and repetitive use in production contexts. For practical workflows, the straightforward geometry of the inspection pin makes it suitable for quick plug checks, fixture set‑up and as a verification master for comparators. The compact weight and form factor allow rapid handling while maintaining the reference surface that supports reproducible results across multiple operators. Clear role in traceable inspection routines A measuring pin serves as a reference element rather than a micrometer replacement: it defines an end‑measure that can be used to verify bores, gauge seats and assembly fits quickly and repeatedly. The ±0.001 mm specification should be interpreted as a manufacturing tolerance that supports high‑precision checks; ensure measuring protocols account for thermal effects and handling. Using this inspection pin within a documented routine improves process control and reduces rework by catching deviations at the right point in production. For specialist requirements such as calibrated reference artefacts, consult Metav Werkzeuge about available services and traceability options Select the Metav IndustryLine measuring pin for dependable workshop inspection and contact Metav Werkzeuge for tailored advice or ordering at the Emmerich site Technical data Article number: M323.710 GTIN: 4061905061288 Manufacturer: Metav IndustryLine Facts Diameter nominal: 7.10 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.02 kg Special features Material: special steel Workshop execution Single gauge pin for end‑measure verification FAQ What size and accuracy does the gauge offer? The measuring pin has a nominal diameter of 7.10 mm and is manufactured to a tolerance of ±0.001 mm, making it suitable for fine end‑measure checks and plug‑type inspections. Which applications suit this inspection pin? Typical uses include bore verification, fixture set‑up, plug checks and quick acceptance testing where a fixed reference diameter is required; the design supports routine production and workshop tasks. Is the pin robust enough for daily workshop handling? Yes, the pin is specified as a workshop execution part and is made from special steel, providing a balance of wear resistance and dimensional stability for regular use. How does the specified tolerance affect measurement practice? A tolerance of ±0.001 mm indicates tight manufacturing control; to benefit fully, measurement procedures should control temperature and handling to avoid introducing additional uncertainty. Can this pin be used as a master for comparative gauges? The pin functions well as a reference for comparative testing and fixture verification; for formal calibration or traceable master requirements, please enquire about available verification services Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.11mm Gauge Pin, Single, ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra-fine tolerance, robust special-steel construction, and compact 50 mm length for reliable end‑measurement tasks; order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge Pin M323.711 — Precision inspection pin, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The Gauge Pin M323.711 is a single inspection pin designed for precise end‑measurement and plug‑gauging in production and quality‑control environments. Tight tolerance ±0.001 mm Special steel core for wear resistance 50 mm overall length for deep checks Suitable for end‑measurement and gauging Precision that reduces rework and speeds inspection The core advantage of this inspection pin is its ±0.001 mm specified tolerance, which positions it within the category of high‑precision metrology tools. Such a fine tolerance supports reliable pass/fail gauging and repeatable dimensional checks in serial inspection routines, reducing uncertainty in production decisions. The tight specification also helps to detect minute deviations early in the process, which in turn decreases scrap rates and saves machining time. Where traceable references are required, the pin’s nominal diameter of 7.11 mm is identified clearly for catalogue and control‑plan integration. Robust construction for repeatable measurements Manufactured from special steel, the gauge pin combines hardness and surface integrity to deliver consistent contact conditions over extended use. The 50 mm overall length provides access into recesses and deeper bores while maintaining a compact form that minimises lateral deflection. The geometry and material choice are oriented toward wear resistance and dimensional stability, so calibration intervals can be predictable and measurement drift is reduced. With a mass of approximately 0.02 kg, handling is straightforward in routine inspection jigs and small sorting fixtures without adding handling complexity. Integration into quality workflows and compatibility This inspection pin is intended for straightforward incorporation into plug‑gauge fixtures, go/no‑go assemblies and end‑measurement checks where a defined reference diameter is required. The single‑piece format simplifies inventory control and enables focused replacement strategies when wear is observed. The combination of defined diameter, tight tolerance and compact length makes it suitable for component verification in precision engineering, small‑part manufacture and toolroom inspection. For customers seeking specification matching or batch supply, technical advice is available to align the gauge pin with existing inspection protocols and traceability documentation. Contact Metav Werkzeuge for a quotation and specification review — Metav IndustryLine M323.711 is available from our Emmerich stock and our consultants can advise on integration into existing inspection routines Technical Data Article number: M323.711 GTIN: 4061905061295 Manufacturer: Metav IndustryLine Facts Diameter: 7.11 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.02 kg Special features Material: Special steel Version: Workshop execution Intended use: End measurement (inspection pin) FAQ What is the nominal diameter and tolerance of this inspection pin? The inspection pin has a nominal diameter of 7.11 mm with a tolerance of ±0.001 mm, specified for the Metav IndustryLine M323.711 inspection pin. Is the M323.711 suitable for repeated plug‑gauge use in production? Yes, the M323.711 is designed as a robust workshop version with special‑steel construction to provide wear resistance suitable for repeated plug‑gauge and end‑measurement applications. Can this pin be used for bore verification and depth checks? The 50 mm overall length makes the pin suitable for short‑depth bore verification and recessed checks where a compact, stable reference is required. How often should the pin be inspected or replaced? Inspection frequency depends on application and use; however, the special‑steel construction of the Metav IndustryLine pin supports predictable wear patterns, facilitating scheduled checks within routine maintenance intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.12mm Gauge Pin ±0.001mm Length 50mm Workshop Version Plastic Case - Metav IndustryLine
Take advantage of micrometre-level precision (±0.001 mm) combined with a compact 7.12 mm diameter and a 50 mm working length to speed up routine inspection tasks while keeping measurement uncertainty low. Benefit from a robust, workshop-grade design and order the gauge pin directly via Metav Werkzeuge or ask our consultants if specialist advice is required. Gauge pin M323.712 — Precision single gauge pin, 7.12 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.712 is a single, workshop‑grade inspection pin designed for highly accurate end‑measurements and repeat checks in production and quality control. Precision diameter 7.12 mm ±0.001 mm 50 mm length in special steel Single-pin supply for targeted checks Workshop-grade construction for robustness Micrometre-level stability for fast inspection The M323.712 delivers ±0.001 mm nominal tolerance, which corresponds to one micrometre accuracy and supports reliable classification of mating bores and reference features on production runs. Such fine tolerance reduces rework frequency and shortens inspection throughput because each measurement contributes meaningful, traceable data rather than a wide uncertainty band. The result is a measurable gain in process confidence when the pin is used as a go/no‑go reference or as part of an inspection fixture. Compact geometry that fits tight fixtures A 7.12 mm diameter combined with a 50 mm working length provides a balance between access and rigidity: the short, stiff shank resists bending under light contact, while the length is sufficient for many end‑measurement tasks and bench fixtures. These dimensions make the component suitable where space is limited but reliable contact is essential, such as pin gauges in assembly jigs or quick‑check sockets on the shop floor. Material selection focused on longevity Manufactured from special steel, the pin offers improved wear resistance compared with standard steels and maintains dimensional stability during repetitive contact checks. The chosen alloy and heat treatment increase the service life of the inspection element, lowering lifetime cost per measurement. Where frequent insertions and withdrawals occur, the material choice reduces surface degradation and preserves the published tolerance for longer. Built for workshop conditions and handling The workshop execution emphasises durability: a straightforward single‑pin supply facilitates quick replacement and targeted checks without bulk packaging. The robust finish and compact form support routine handling at the inspection bench, while the single‑item delivery suits calibration laboratories and production teams that require individual reference pins rather than full sets. Integration into inspection workflows The pin is compatible with standard gauge block sets, pin matrices and bench jigs used for end‑measurement and final inspection. Its repeatability helps to standardise quick verification steps in incoming inspection or final acceptance, supporting faster decision cycles on lot conformity. Using defined gauge pins streamlines measurement routines and reduces subjective judgement during manual checks. Procurement clarity and dependable supply Sourcing through Metav IndustryLine ensures consistent product specification and a clear supply path for replacement items. Metav’s role as a precision partner means that the M323.712 is accompanied by comprehensive product information and reliable logistics, supporting uninterrupted inspection processes across workshops and small production lines. Choose the Metav IndustryLine M323.712 gauge pin for micrometre‑grade end measurements — contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.712 GTIN: 4061905061301 Brand: Metav IndustryLine Category: Gauge pins Core measurements Diameter: 7.12 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.02 kg Special features Workshop execution Single gauge pin supply Material: special steel Intended for end-measurement (endmasse) FAQ What level of precision does this gauge pin offer? The M323.712 gauge pin provides a nominal tolerance of ±0.001 mm, suitable for micrometre‑level repeatability in inspection tasks. Is the pin suitable for use in fixture and jig systems? Yes, the compact 7.12 mm diameter and 50 mm length make the pin well suited to fixture integration, bench jigs and pin matrices for end‑measurement. What material is used and why does it matter? The pin is made of special steel, selected to improve wear resistance and maintain dimensional stability under frequent contact. Can this pin serve as a reference in go/no‑go checks? The M323.712 is designed for targeted checks and can be used as a reference element in go/no‑go or quick‑check procedures where micrometre accuracy is required. Is the product supplied individually or as a set? This item is supplied as a single gauge pin, allowing precise replacement or targeted procurement for inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.13mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact length and robust workshop design for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for application support. Gauge pin, single, 7.13 mm ±0.001 mm – Workshop version (Metav IndustryLine) The gauge pin, single, 7.13 mm ±0.001 mm, length 50 mm is a precision reference pin designed for end‑dimension checks, fixture setting and gauge adjustment in workshop metrology. Workshop version for robust daily use Diameter 7.13 mm with ±0.001 mm tolerance 50 mm length, hardened special steel Delivered in transport case for safe handling Accurate reference for tight tolerance tasks A compact reference pin with a nominal diameter of 7.13 mm and a declared tolerance of ±0.001 mm provides the repeatability required for fine end‑dimension verification. The small mass and short length yield minimal thermal drift and reduced handling error, so machining tolerances and assembly fits can be verified swiftly. As a hardened, single gauge pin the component serves as a stable datum for pin gauges, plug gauge sets or toolsetting operations, helping to reduce rework and inspection time. Practical benefits in everyday workshop metrology Built as a workshop version, this pin combines hardwearing construction with straightforward handling: the 50 mm shank length balances reach and rigidity for common fixture and gauge‑setting tasks. Delivered in a secure transport case, the item is protected from knocks and contamination during storage and transit. This makes the pin suitable for production floors where resilience and immediate availability of a calibrated reference help maintain flow in quality control processes. Materials, handling and measured outcomes Manufactured from special steel and finished to tight dimensional standards, the pin offers consistent surface integrity for contact measurements. Lightweight construction (approx. 0.02 kg) simplifies manual placement during comparative tests or when used as a reference for setting go/no‑go instruments. Using a precisely manufactured gauge pin reduces measurement uncertainty and supports more efficient decision‑making in inspection routines and during first‑article checks. Contact Metav Werkzeuge for stock information and tailored advice on integrating this gauge pin (M323.713) into workshop metrology Technical Data Article number: M323.713 GTIN: 4061905061318 Label: Prüfstift, einzeln, 7,13mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.13 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Special features Material: Special steel Version: Workshop execution Delivery: Transport case for safe handling Intended use: end‑dimension checks / reference pin FAQ What is the exact diameter and tolerance of the pin? The pin is manufactured to a nominal diameter of 7.13 mm with a tolerance of ±0.001 mm, making it suitable as a precision reference in workshop metrology. Is this gauge pin appropriate for routine fixture setting? Yes, the workshop execution and 50 mm length make this pin well suited to routine fixture and gauge‑setting tasks where a compact, durable reference is required. What material is used and how does it affect performance? The pin is made of special steel, offering wear resistance and dimensional stability for repeated contact measurements and long service life. How is the item delivered and protected in transit? The gauge pin is supplied in a transport case to protect the surface from damage and contamination during storage and handling. Can the pin be used as a reference for pin gauge sets or toolsetting? Yes, the pin’s precise diameter and small form factor allow it to function as a reference for pin gauge comparisons and for toolsetting operations on the shop floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.14mm Gauge Pin Length 50mm ±0.001mm Workshop Finish - Metav IndustryLine
Take advantage of precise end‑size control with a 7.14 mm gauge pin that delivers ±0.001 mm tolerance and consistent seating thanks to its 50 mm length; combine precision, robust workshop design and straightforward handling for reliable inspection results. Order the part via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.714 — Test pin, 7.14 mm dia ±0.001 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.714 for repeatable end‑size inspection and fixture checks in workshop and production environments High precision ±0.001 mm tolerance Diameter 7.14 mm for accurate end‑size checks 50 mm length for consistent positioning Workshop design, robust special‑steel construction Consistent end‑size verification for production control A compact inspection element that supports fast, quantifiable checks on finished components. The ±0.001 mm tolerance provides a clear rational advantage where tight end‑size criteria govern acceptance; the controlled diameter of 7.14 mm reduces interpretation errors during go/no‑go testing and pass/fail checks. Used as a reference pin in gauge assemblies, this inspection tool shortens cycle time in quality control and helps maintain reproducible results across shifts. Robust workshop construction that suits everyday use Built in a workshop specification and manufactured from special steel, the pin balances stiffness with handling convenience. The 50 mm length gives a secure seating depth for fixtures and jigs, improving repeatability when locating parts for measurement or assembly. At 0.02 kg the component is easy to manipulate for manual inspection routines yet substantial enough to resist minor knocks, supporting dependable performance in standard machine‑shop environments. Integration into inspection workflows and measurement assurance Designed for direct incorporation into gauges, foolproof checking stations and manual inspection benches, the M323.714 enables efficient process control with minimal setup. Traceable dimensional certainty and clearly defined tolerances support rational decision‑making in production and incoming inspection. The compact form factor and workshop focus reduce handling time and contribute to lower scrap rates, making the tool an economical choice where precision and throughput matter. For reliable end‑size checks choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored advice and rapid supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixtures and inspection processes Technical Data SKU: M323.714 GTIN: 4061905061325 Article label: Prüfstift, einzeln, 7,14mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.14 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.02 kg Special features Material: Special steel Workshop design Intended use: end‑size inspection and gauge fixtures FAQ What tolerance does the gauge pin provide? The gauge pin M323.714 is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑size checks. Which material is the test pin made from? The pin is manufactured from special steel, selected for robustness and dimensional stability in workshop environments. Can the pin be used in go/no‑go fixtures and gauge blocks? Yes, the M323.714 is designed for direct integration into gauge assemblies, fixtures and manual inspection routines for reliable pass/fail testing. What length and diameter aid positioning in fixtures? With a length of 50 mm and a diameter of 7.14 mm, the pin offers consistent seating and straightforward locating in measurement fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.15mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact inspection solution that combines ±0.001 mm tolerance, a precise 7.15 mm nominal diameter and a practical 50 mm length for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.715 — precision inspection pin, 7.15 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.715 is a single workshop‑grade inspection pin designed for accurate end‑measurement and plug checks in quality control and inspection processes. 7.15 mm nominal diameter Tolerance ±0.001 mm high precision 50 mm overall length, workshop version Made from special steel for wear resistance Precision that brings measurable certainty A cylindrical inspection pin with a 7.15 mm nominal diameter and an accuracy of ±0.001 mm delivers repeatable verification for tight‑tolerance fits. The very low deviation—equivalent to 1 micron—means the component under test can be judged with professional certainty. For metrology tasks where bore or hole validation defines production acceptability, this compact inspection pin provides a clear pass/fail basis without complex setups. The special steel construction combines surface hardness and dimensional stability, reducing wear and preserving the calibration state over many cycles. Compact design, simple handling, reliable results At 50 mm overall length and weighing approximately 0.02 kg, the pin is easy to position and manoeuvre in workshop and bench environments. The single‑piece format suits quick manual checks and fitted gauging, while the workshop specification ensures the part withstands routine handling. The straightforward geometry eliminates interpretation: a snug fit confirms conformity; excessive play indicates rework or rejection. Where traceability is required, the plain form factor makes labelling and storage simple, and the minimal mass reduces the risk of damage during inspection sequences. Integration into quality workflows and inspection routines The gauge pin supports established inspection routines and complements plug‑gauge sets and callipers used in the same process chain. As a measurement reference, the pin is suitable for end‑measurement tasks and quick dimensional checks during incoming inspection or in‑process control. The robust special steel material and the defined tolerance make it a dependable component for repeat checks and comparative gauging. For documented quality regimes, include the pin's serial or SKU reference in records to maintain a clear audit trail for measured parts. Contact Metav Werkzeuge for application guidance or to request the Metav IndustryLine gauge pin M323.715 for precision checks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.715 GTIN: 4061905058196 Label: Prüfstift, einzeln, 7,15mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.15 mm Length: 50 mm Weight: 0.02 kg Accuracy: ±0.001 mm Special features Material: Special steel Workshop version Single inspection pin Suitable for end‑measurement and plug checks FAQ What level of precision does this inspection pin offer? The gauge pin delivers a precision of ±0.001 mm, making the M323.715 suitable for micron‑level end‑measurement checks. Which materials is the pin intended to inspect? The inspection pin itself is made from special steel and is used to verify bores and holes in a wide range of components where a 7.15 mm reference is required. Is the gauge pin suitable for routine workshop use? Yes, the workshop specification and robust material make the M323.715 appropriate for regular inspection cycles and bench checks. How should the pin be used in a quality workflow? Use the pin for direct plug checks, end‑measurement and quick dimensional validation; record the SKU M323.715 in inspection logs to ensure traceability. Can this pin replace more complex gauging tools? For simple go/no‑go and fit assessments at the 7.15 mm diameter, the pin offers a compact alternative to more elaborate gauges and speeds up routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.16mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
The compact combination of 7.16 mm diameter, ±0.001 mm tolerance and a 50 mm overall length delivers reproducible end‑measurement checks with minimal setup time; ideal for routine inspection tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Gauge pin M323.716 — 7.16 mm, ±0.001 mm, workshop version (Metav IndustryLine) A gauge pin M323.716 designed for precise end‑measure verification and rapid go/no‑go control in workshop and inspection environments. Workshop version, robust design Diameter 7.16 mm with ±0.001 mm accuracy 50 mm overall length for deep checks Made from special steel for durability Consistent diameter control for reproducible inspection results A high‑precision feel is at the core of this tool: the ±0.001 mm tolerance guarantees that diameter checks and reference measurements are repeatable across production runs. Used as a hard reference for bores, seats or alignment checks, the hardened pin geometry minimises measurement uncertainty and supports quick accept/reject decisions on the shop floor. The combination of a true cylindrical form and tight tolerance reduces rework by ensuring that measured deviations are process‑related rather than artefacts of the gauge. Durable workshop construction that withstands everyday use Built as a workshop version, the pin is machined from special steel to resist wear from frequent insertion and removal. The 50 mm overall length enables access to deeper features while maintaining the stiffness required for accurate contact. The compact mass and balanced geometry make handling straightforward during repetitive checks, while the material choice sustains dimensional stability under normal workshop stresses, thereby extending service life and protecting calibration intervals. Streamlined inspection routines and faster quality decisions Integrating this single gauge pin into routine checks accelerates inspection throughput and simplifies documentation. As a standardised reference component, it reduces setup time for manual comparisons and fits easily into bench kits or gauge sets. Using standardised pins for end‑measure verification helps to harmonise procedures across teams, lowering variation in measurement technique and supporting faster, evidence‑based decisions about batch conformity and corrective actions. For workshop‑grade measurement reliability, request the Metav IndustryLine gauge pin M323.716 from Metav Werkzeuge and consult our team for integration into existing inspection routines. Technical data Article number: M323.716 GTIN: 4061905058202 Label: Gauge pin, single, 7.16 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 7.16 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Special features Workshop version Single piece supply Material: Special steel Robust cylindrical geometry FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.716 (Metav IndustryLine) is manufactured to a tolerance of ±0.001 mm, providing high‑precision diameter control for inspection tasks. Which material is used for the pin? This Metav IndustryLine gauge pin is made from special steel, chosen for dimensional stability and durability under repetitive workshop use. Is the pin supplied individually or as a set? The item is supplied as a single gauge pin; the product is described and delivered individually under SKU M323.716. What is the overall length and how does that affect applications? The pin has a 50 mm overall length, enabling access to deeper bores and seats while maintaining sufficient stiffness for accurate end‑measure checks. Can this pin be used for go/no‑go checks on bores? Yes, the 7.16 mm diameter and ±0.001 mm tolerance make the pin suitable as a reference for go/no‑go and end‑measurement verifications in workshop inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.17mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance and robust workshop design to secure repeatable end‑measure checks; the 7.17 mm diameter and ±0.001 mm tolerance ensure reference accuracy while the 50 mm length gives stable handling. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for delivery and technical details. Gauge pin M323.717 — 7.17 mm, ±0.001 mm (Metav IndustryLine) A gauge pin M323.717 for precise end‑measure verification and reference seating in workshop inspection and assembly tasks. High tolerance ±0.001 mm Diameter 7.17 mm precision 50 mm length for stable handling Workshop version with protective case Precision that reduces rework and rejects The pin is manufactured to a tight tolerance of ±0.001 mm, which translates into measurable improvements in inspection reliability and fewer false rejects on production lines. With a nominal diameter of 7.17 mm, the component functions as a dimensional reference for bore and seating checks, enabling quick verification of end‑masses and fitted parts. The combination of narrow tolerance and consistent geometry supports traceable inspection routines and better process control in small‑part assembly. Robust workshop design for everyday use Built as a workshop version, the pin is intended to withstand frequent handling while preserving metrological integrity. The body is made from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. At 50 mm overall length the pin provides a comfortable grip and enough engagement depth for stable measurements without excessive overhang. Delivery in a protective case reduces transit damage and keeps the reference surface clean between uses, increasing service life and lowering replacement frequency. Practical integration into quality workflows This compact gauge pin serves as a practical reference for end‑measure inspections, seating tests and fixture set‑up. Its geometry and tolerance make it suitable as a reference pin in go/no‑go checks, alignment aids in jigs, and quick pass/fail assessments on the shop floor. As a precision component for small‑scale checks, it complements digital calipers and micrometres by offering a fixed‑diameter datum that simplifies repeatability across operators and shifts. For workshop supplies, delivery from Emmerich and tailored advice on using Metav IndustryLine gauge pins, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.717 GTIN: 4061905058219 Weight: 0.02 kg Material: Special steel Version: Workshop Core specifications Diameter: 7.17 mm Length: 50 mm Tolerance: ±0.001 mm Special features Protective case for transport Category: Gauge pin / test pin Suitable for end‑measure and seating checks FAQ What tolerance does this gauge pin offer? The gauge pin M323.717 is manufactured to a tolerance of ±0.001 mm for high‑precision reference measurements. What material is the pin made from? This test pin is made from special steel, selected for dimensional stability and wear resistance under workshop conditions. Is this pin suitable for fixture and jig set‑up? Yes, the workshop version of the gauge pin is designed for stable handling and can be used as a reference in fixtures and jigs; the 50 mm length provides practical engagement depth. How is the pin delivered? The item is supplied in a protective case intended for transport to keep the reference surfaces clean and protected. Can this pin be used for end‑measure checks on small bores? The 7.17 mm diameter and tight tolerance make the pin well suited to end‑measure checks and seating verification on small bores and assembled parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.18mm Gauge Pin Single, Workshop Grade, Length 50mm, ±0.001mm Accuracy - Metav IndustryLine
Take advantage of the combination of ultra-fine tolerance, robust workshop execution and compact dimensions for reliable end-measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.718 Gauge Pin — 7.18 mm, ±0.001 mm (Metav IndustryLine) The M323.718 is a precision gauge pin for end measurements and go/no-go checks in workshop and inspection routines, supplied in a transport case and designed for repeatable reference measurements. High-precision tolerance ±0.001 mm Diameter 7.18 mm for exact end fits Length 50 mm for deep reference points Workshop-grade execution with transport case Precision where small tolerances decide This compact gauge pin is engineered for high precision applications where deviations are measured in micrometres. With a nominal diameter of 7.18 mm and a tolerance of ±0.001 mm, the component provides a stable reference for final inspection, fit checks and dimensional verification. Manufactured from special steel, the pin resists routine wear and maintains repeatability across measurement cycles, which reduces rework and supports consistent quality control in small-batch and series production environments. Built for workshop use and safe handling The robust workshop execution and a 50 mm length make this instrument straightforward to integrate into bench inspection jigs and depth-restricted assemblies. Supplied in a transport case, the pin is protected during storage and transit, lowering the risk of handling damage that would compromise accuracy. Low mass eases handling while preserving stiffness, so measurement drift from bending is minimised and inspection throughput remains efficient for repetitive checks. Simple integration into inspection procedures As an end-measure reference, the pin supports quick go/no-go gauging, mandrel checks and comparative measurements when combined with indicators or bench fixtures. Traceable identification by SKU and GTIN facilitates stock and calibration management; the product is identified for procurement and inventory processes to support quality-document workflows. The compact geometry is particularly useful where small bore checking or end-face alignment is required, delivering a tangible improvement in inspection reliability and process control. Contact Metav Werkzeuge today to discuss application suitability or request a tailored quotation for the M323.718 gauge pin and related metrology accessories. Technical data Article number: M323.718 GTIN: 4061905059131 Label: Prüfstift, einzeln, 7,18mm, +/- 0.001 mm Länge 50 mm Weight: 0.02 kg Material: Special steel Facts Nominal diameter: 7.18 mm Tolerance: ±0.001 mm Length: 50 mm Category: Gauge pin Special features Workshop-grade execution Supplied in transport case for transport protection Designed for end-measure and fit checks Compact, low-mass design for easy handling FAQ What level of accuracy can be expected from this gauge pin? The M323.718 gauge pin is specified with an accuracy of ±0.001 mm, making it suitable for high-precision fit and end-measure checks. Is the M323.718 suitable for deep bores or recessed fits? Yes, the 50 mm length provides reach for deeper reference points and recessed checks while maintaining dimensional stability. What material is the pin made from and how does it affect wear? The pin is manufactured from special steel, chosen to balance hardness and resistance to routine workshop wear for consistent repeatability. Can the pin be used for go/no-go gauging applications? The diameter and tolerance of the M323.718 make it appropriate as a reference mandrel or limit reference in simple go/no-go and comparative gauging routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.19mm Gauge Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high micrometric accuracy and robust workshop design to keep inspection routines reliable and efficient; the ±0.001 mm tolerance and special steel construction support repeatable checks with minimal rework. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.719 – single test pin, 7.19 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.719 is a single, precision test pin for end‑measure verification and go/no‑go checks in workshop and inspection environments. Workshop version for heavy use High tolerance of ±0.001 mm Ground special steel for wear resistance 50 mm length for secure engagement Delivered in a transport case Consistent micrometric accuracy for production checks A tolerance of ±0.001 mm places this test pin in the high‑precision segment, making it suitable for critical dimensional checks where short‑term variation must be avoided. The nominal diameter 7.19 mm and the tight tolerance ensure minimal measurement uncertainty when used as a reference in comparative checks or as a plug for feature validation. This degree of accuracy reduces the need for repeated measurements, lowers scrap rates and shortens inspection cycles — a clear efficiency gain for inspection benches and small series production. Robust construction reduces rework and downtime Manufactured from special steel and offered in a workshop version, the pin is designed to withstand frequent handling and the mechanical stresses typical on the shop floor. The hardened, ground surface gives long service life and maintains dimensional stability over repeated insertions, which reduces replacement frequency and maintenance effort. The compact 50 mm length provides secure engagement in bores and features without excess overhang, promoting repeatable contact conditions and stable measurement results. Compact handling and protected transport for daily use With a low mass and a dedicated transport case, the test pin is simple to store and easy to carry between workstations or measuring machines. The protective case minimises the risk of nicks or contamination during transport, keeping the measuring surface intact and preserving the corrected fit within the stated tolerance. The combination of compact form and protective packaging supports fast setup and safe storage, helping to keep inspection throughput steady on busy production floors. Fits seamlessly into inspection and verification processes Designed for end‑measure checks and functional gauging tasks, the pin integrates well with fixtures, bench gauges and handheld comparator setups. Using a dedicated precision pin as a reference shortens the verification loop and clarifies go/no‑go decisions at first sight, supporting faster process control. The workshop construction and tight tolerance make this solution particularly suited to small‑batch production, toolroom checks and quality control where repeatability and clarity of result are decisive. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M323.719 gauge pin can streamline inspection routines and ensure repeatable measurement results on the shop floor Technical data SKU: M323.719 GTIN: 4061905059148 Category: Gauge pin (Messstifte) Manufacturer: Metav IndustryLine Dimensions & tolerance Diameter: 7.19 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.02 kg Materials & features Material: Special steel Version: Workshop execution Packaging: Transport case (plastic/wooden) Intended use: End‑measure / inspection pin FAQ What is the exact tolerance of this test pin? The test pin is manufactured to a tolerance of ±0.001 mm, providing high‑precision dimensional conformity for verification and plug‑type gauging. Can the pin be used for serial go/no‑go checks? Yes, the gauge pin is suitable for repeated go/no‑go and end‑measure inspections thanks to its ground special steel surface and workshop design. Is the product supplied individually or as a set? This item is supplied as a single test pin; the SKU for ordering is M323.719 and it is part of the Metav IndustryLine range. How does the 50 mm length affect use? A 50 mm length offers secure engagement for many bore and feature checks while keeping the exposed portion short enough to limit bending and maintain repeatability. What applications suit this pin best? Typical uses include end‑measure verification, plug gauging and toolroom checks where a compact, high‑accuracy reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.21mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial robustness, ±0.001 mm accuracy and compact handling for reliable end‑size inspection; order the item directly via Metav Werkzeuge or contact our advisors for technical clarification. Gauge pin M323.721 — single precision gauge pin, ø 7.21 mm, tolerance ±0.001 mm (Metav IndustryLine) The gauge pin M323.721 is a single, precision test pin designed for end‑size verification and assembly checks in workshop and production environments. Workshop version for daily use Diameter 7.21 mm for end‑size checks Tolerance ±0.001 mm for high precision Length 50 mm for stable insertion depth Precision that stabilises production quality The gauge pin is manufactured to a tight tolerance of ±0.001 mm, ensuring consistent pass/fail decisions when checking end dimensions. Such fine repeatability reduces rework and scrap by making dimensional checks decisive rather than suggestive. With a nominal diameter of 7.21 mm and a calibrated profile, the component is suitable for use as a reference pin in go/no‑go fixtures and bench checks. The small mass (0.02 kg) and compact geometry cut cycle time for manual checks while keeping handling safe and straightforward. Robust design for everyday workshop demands Built as a workshop version, the pin combines a hard, wear‑resistant special steel body with geometry optimised for repeated insertion. The 50 mm length gives enough engagement to avoid wobble while maintaining accessibility in confined assemblies. The material choice provides a balance between surface hardness and machinability, yielding long service life under regular use. This robust construction supports reliable measurements over time, reducing the need for frequent replacement and supporting continuous production flows. Integrates smoothly into quality workflows Use the pin for final dimensional verification, fixture validation and as a reference in assembly jigs where a defined end measurement is required. The clear specification (ø 7.21 mm, ±0.001 mm, 50 mm) simplifies documentation and traceability when incorporated into inspection protocols. For workshops aiming to formalise quality control steps, the pin is an efficient tool for transferring tolerances from drawings into practical checks. Its precise dimensioning helps to avoid ambiguous assessments and to document conformity with internal tolerance plans. For availability, batch information or to discuss how the Metav IndustryLine gauge pin fits specific inspection tasks, please contact Metav Werkzeuge by email or phone for personalised advice and fast fulfilment. Technical data Article number: M323.721 SKU: M323.721 GTIN: 4061905059162 Brand: Metav IndustryLine Core technical data Diameter: 7.21 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.02 kg ECLASS: 21170231 Special features Material: special steel Workshop design Application: end‑size inspection / test pin Story trigger: end‑size FAQ What measurements is this pin intended for? The gauge pin M323.721 is intended for end‑size verification and plug‑type checks where a defined diameter of 7.21 mm with ±0.001 mm tolerance is required. How precise is the M323.721 in routine checks? The M323.721 delivers a declared accuracy of ±0.001 mm, making it suited to precise go/no‑go and reference applications in workshop and production settings. What material is used and how durable is it? Constructed from special steel and specified as a workshop version, the gauge pin from Metav IndustryLine provides wear resistance appropriate for frequent use. Can the pin be used in fixture and jig applications? Yes — the pin’s 50 mm engagement length and precise diameter make it suitable for integration into fixtures, assembly jigs and bench inspection routines. Is the item suitable for traceable inspection documentation? The clear specification and the product identity (M323.721, Metav IndustryLine) support traceability when the pin is recorded in inspection logs and quality procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.22mm Go/No‑Go Gauge Pin ±0.001mm Length 50mm, Workshop Grade - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, robust special steel construction and compact 50 mm length for reproducible end‑dimension checks; order the test pin directly via Metav Werkzeuge or consult our advisors if clarification is required. Test pin M323.722 — single precision pin Ø 7.22 mm, ±0.001 mm The Test pin M323.722 is a single workshop‑grade precision reference pin designed for reliable end‑dimension inspection and gauging tasks in small‑part production. Precision tolerance ±0.001 mm Diameter Ø 7.22 mm 50 mm reference length Workshop version, robust construction Accuracy that reduces rejects and rework A tight tolerance of ±0.001 mm places this reference pin in the high‑precision segment for shop‑floor checks. When used as a calibre or reference element in inspection routines, the consistently narrow error band reduces measurement uncertainty and the frequency of expensive rework. The measurable benefit is improved first‑pass yield and predictable interchangeability of mating parts, which supports throughput targets in small‑batch and precision assemblies. Compact form factor for micro‑scale inspection With a diameter of Ø 7.22 mm and a 50 mm overall length, this item is classified in the micro class (measurement range up to 100 mm), making it particularly suitable for fine mechanical work, watchmaking components and small housings. The compact geometry keeps leverage and bending moments low, so the pin remains stable during manual or fixture‑based checks. The modest mass aids careful positioning and repeatable seating against reference surfaces. Workshop robustness and material choice Manufactured from special steel, the pin combines surface stability with resistance to everyday workshop stresses. The workshop‑grade finish is intended for repeated handling and insertion into gauges, while retaining dimensional integrity. Delivered as a single piece, the component is ideal where a dedicated reference pin is needed for serial inspection or to serve as a master in simple gauge assemblies. Practical integration into inspection workflows SKU M323.722 fits into existing gauging and end‑dimension verifications without elaborate adaptation. The compact shape allows use in pinned jigs, plug gauges and manual comparators. Traceable identification (GTIN available) simplifies stock management and documentation. For operations seeking to standardise small‑part checks, the pin offers a straightforward, low‑overhead solution that strengthens process control and measurement repeatability. Request a technical quote or stock check from Metav Werkzeuge — mention SKU M323.722 to benefit from Metav's quality filter and pragmatic delivery from Emmerich Technical data SKU: M323.722 GTIN: 4061905059179 Material: Special steel Type: Single test pin Category: Test pins Facts Diameter: 7.22 mm Length: 50 mm Accuracy / Tolerance: ±0.001 mm Weight: 0.02 kg Measurement range: 7.22 mm Special features Workshop version (Werkstatt‑Ausführung) Single piece delivery Designed for end‑dimension checks Classified as Micro (measurement range ≤ 100 mm) GTIN and SKU for traceability FAQ What tolerance does the test pin provide? The item is specified with an accuracy of ±0.001 mm, making it suitable for high‑precision end‑dimension checks and gauge masters. Is this pin suitable for micro mechanical parts? Yes. Classified in the micro category (measurement range up to 100 mm), the pin’s Ø 7.22 mm diameter and 50 mm length are well suited to small‑part and watchmaking inspections. What material is used for the pin? The pin is made from special steel, selected for dimensional stability and durability in workshop handling. How is the product delivered and identified? The product is supplied as a single test pin. Reference details: SKU M323.722, GTIN 4061905059179. Can this pin be integrated into existing gauges and jigs? Yes. The compact geometry and workshop design allow straightforward use in plug gauges, pinned fixtures and manual comparators for reproducible checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.23mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra-fine tolerance, robust workshop construction and compact length for reliable end‑measure control; order the precision test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.723 Precision Test Pin (Ø 7.23 mm, ±0.001 mm) — Metav IndustryLine M323.723 Precision Test Pin offers high-precision dimensional checks for fixtures, gauges and end‑measure inspection in workshop environments. High-precision Ø 7.23 mm, ±0.001 mm 50 mm length for fixture compatibility Special steel, workshop-grade construction Supplied in protective transport case Consistent measurement certainty for inspection tasks The core advantage of this inspection pin is its ±0.001 mm tolerance, which provides a level of repeatability suitable for demanding workshop controls and fine mechanical verification. With a nominal diameter of Ø 7.23 mm, the component fits common bore gauges and alignment fixtures, enabling straightforward comparative measurements. This dimensional stability reduces rework and inspection uncertainty, supporting faster decision-making in production and quality control. Durable design for everyday workshop use Manufactured from special steel, the test pin is engineered for resilience under regular handling and contact with gauge assemblies. The 50 mm length gives sufficient engagement depth while remaining compact for easy positioning in cramped setups. The workshop-grade finish resists wear in routine use and the low mass assists quick handling on inspection benches. Delivery in a protective case prevents transport damage and keeps the pin ready for immediate use at the workstation. Practical integration into inspection workflows This single test pin is intended for end‑measure and plug‑gage comparisons, where reliable single-diameter reference pieces are required. The compact geometry suits use in gauge blocks, fixture checks and manual comparison rigs, improving throughput by simplifying set-up times. Documentation and traceability are supported by the clear SKU and GTIN labelling, which aids stock management and order repetition. For customers seeking consistent workshop performance, the pin combines ease of use with precise engineering. Contact Metav Werkzeuge to specify the M323.723 precision test pin and arrange supply directly from Emmerich for reliable, workshop-ready measurement equipment Technical data SKU: M323.723 GTIN: 4061905059186 Label: Test pin, single, 7.23 mm, ±0.001 mm, length 50 mm Facts Diameter: 7.23 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Special features Material: special steel Version: workshop execution Delivery: supplied in protective transport case FAQ What tolerance does the test pin offer? The M323.723 precision test pin is manufactured to a tolerance of ±0.001 mm, suitable for high‑accuracy workshop inspection tasks. Which material is used for this inspection pin? The pin is made from special steel, providing wear resistance and stable dimensional behaviour in routine use. Is the pin suitable for fixture and gauge checks? Yes; the 7.23 mm nominal diameter and 50 mm length make it appropriate for bore gauges, fixture alignment and end‑measure comparisons. How is the product delivered for protection? The M323.723 arrives in a protective transport case to prevent damage during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.24mm Gauge Pin ±0.001 mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of ±0.001 mm repeatability, a 7.24 mm reference diameter and a compact 50 mm length to secure fast, reliable end‑measure checks in the workshop; order the pin directly via Metav Werkzeuge or consult the team for application advice. M323.724 gauge pin (single) — 7.24 mm ±0.001 mm, 50 mm length, Metav IndustryLine A M323.724 gauge pin designed as a workshop‑grade reference for end‑dimension verifications, providing a compact, high‑precision tool for quality control and inspection tasks. Workshop-ready single gauge pin Diameter 7.24 mm with ±0.001 mm accuracy 50 mm length in special steel Low mass 0.02 kg for precise seating High‑accuracy checks that reduce rework and downtime This single‑piece gauge pin delivers ±0.001 mm tolerance, making it suited for fine acceptance checks and fit verification where micrometre‑level accuracy is required. The combination of a defined 7.24 mm diameter and tight manufacturing tolerance supports repeatable go/no‑go assessments and final dimension confirmation. By using a stable, single‑diameter reference, measurement throughput is increased and the risk of false rejects is reduced, which keeps production flow efficient and quality documentation concise. Robust workshop design for everyday metrology tasks Manufactured from special steel and finished for consistent seating, the component’s 50 mm length and low mass (0.02 kg) ensure steady contact without excessive inertia. The workshop specification emphasises durability and simple handling under routine use conditions: the compact geometry eases positioning in fixtures and pockets, while the material selection sustains surface integrity during repeated use. The result is a reliable physical reference that minimises mechanical wear and retains dimensional stability over many inspection cycles. Practical integration into quality workflows As a single gauge element, this pin functions as a quick reference for end‑measures and dimensional checks in small batches, toolrooms and maintenance shops. The straightforward geometry avoids complex interpretation: a measured pass at the nominal 7.24 mm diameter confirms conformity, while the ±0.001 mm tolerance gives a clear, objective acceptance criterion for inspection records. Because the design is simple, training requirements are low and the component can be used alongside established measurement routines to boost inspection speed without sacrificing traceability. Who benefits from this precision reference Toolmakers, maintenance technicians and small quality departments gain most from a compact, high‑precision pin that fits manual and semi‑automatic verification steps. The Metav IndustryLine designation signals industrial availability and consistent supply from a European quality filter, making the item a sensible choice where reproducible results and practical workshop performance are priorities. Contact Metav Werkzeuge today to secure the M323.724 Metav IndustryLine gauge pin for precise end‑measure control or to request tailored advice by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data SKU: M323.724 GTIN: 4061905059193 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 7,24mm, +/- 0.001 mm Länge 50 mm Specifications Diameter: 7.24 mm Length: 50 mm Tolerance: ±0.001 mm Mass: 0.02 kg Material: Special steel Features Workshop execution Single gauge pin format Suitable for end‑measure checks Compact geometry for fixture use FAQ What is the dimensional tolerance of the gauge pin? The M323.724 gauge pin is manufactured to a tolerance of ±0.001 mm, providing micrometre‑level repeatability for reference checks. Which diameter and length does the pin have? This reference pin is 7.24 mm in diameter with a 50 mm overall length, designed for compact fixture use. What material is used for this gauge pin? The pin is made from special steel, chosen for surface stability and wear resistance under routine workshop use. Is this product suitable for routine workshop inspections? Yes, the workshop specification and compact format of the Metav IndustryLine pin make it suitable for routine end‑measure verifications and fit checks. Does a calibration certificate come with the item? No explicit calibration certificate is stated for this delivery; customers may request calibration services if a traceable certificate is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.25mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
High accuracy and robust workshop design combine to deliver dependable end‑measure checks: a 7.25 mm diameter with a tight ±0.001 mm tolerance and a 50 mm shaft length ensure consistent fit and repeatable results in gauging and fixture verification. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.725 — Precision test pin, 7.25 mm, ±0.001 mm (Metav IndustryLine) A test pin M323.725 tailored for high‑precision end‑measure checks and fixture validation in workshop applications Workshop version for robust use Diameter 7.25 mm ±0.001 mm Length 50 mm for standard fixtures Made from special steel Precise end‑dimensions for repeatable inspection The compact cylindrical design provides a 7.25 mm nominal diameter with an exceptionally tight ±0.001 mm tolerance, delivering measurable improvements in repeatability for small‑format gauging tasks. This level of precision minimises rework cycles and shortens inspection time by reducing uncertainty in fixture alignment. The dimensional stability of the shaft supports consistent contact conditions during successive checks, which is especially important when end‑measure accuracy determines downstream assembly quality. Durable construction for everyday workshop use Manufactured from special steel, the pin combines surface hardness and wear resistance for prolonged service life under frequent use in a workshop environment. The workshop version specification indicates an emphasis on robustness and practical handling rather than delicate laboratory finishing, making the component suitable for standard production and maintenance operations. The solid construction reduces the need for frequent replacement, supporting operational uptime and predictable inspection schedules. Easy integration into inspection and assembly processes With a 50 mm length and a standardised diameter, the pin integrates smoothly into existing gauge blocks, holders and fixture bores, simplifying retrofitting into established inspection routines. The simple geometry eases setup and alignment, allowing the pin to function as a reliable reference for end‑measure controls or comparative checks. Where traceable documentation is required, the product identifiers and material specification support record keeping in quality control procedures. Contact Metav Werkzeuge today for bespoke advice on integrating this Metav IndustryLine test pin into existing inspection routines and to confirm compatibility with specific fixtures Technical data SKU: M323.725 GTIN: 4061905059209 Manufacturer: Metav IndustryLine Facts Diameter: 7.25 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.02 kg Special features Material: Spezial‑Stahl Workshop version Category: Messstifte FAQ What accuracy does the test pin offer? The Metav IndustryLine test pin M323.725 provides an accuracy of ±0.001 mm, suitable for precise end‑measure checks and high‑repeatability applications. Is the pin suitable for use in standard fixture systems? Yes, the 50 mm shaft length and standardised 7.25 mm diameter make the pin compatible with common gauge holders and fixture bores used in workshop inspection. What material is the pin made from and what does that mean for wear resistance? The pin is made from special steel, which delivers improved wear resistance and durability under routine workshop use, extending service intervals. Can the pin be used for end‑measure verification on small components? The tight tolerance and compact geometry make the pin well suited for end‑measure verification on small parts and precision assemblies where minimal clearance is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.26mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micrometre accuracy, workshop‑ready robustness and straightforward handling for consistent end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored advice. M323.726 Gauge Pin — 7.26 mm inspection pin, ±0.001 mm, 50 mm length (Metav IndustryLine) M323.726 is a single, workshop‑grade inspection pin designed for precise end‑dimension checks on small components and assemblies *Workshop version for everyday use *Diameter 7.26 mm with ±0.001 mm accuracy *50 mm hardened test pin for end measurements *Made from special steel for wear resistance *Delivered in protective transport case Precision that reduces rework and rejects The inspection pin delivers ±0.001 mm geometric accuracy, which provides a clear rational advantage where tight end‑dimensions matter. This level of tolerance minimises measurement uncertainty during plug and seat checks and supports reproducible pass/fail decisions on small bores or mating faces. Because the shaft is manufactured to a fixed 7.26 mm nominal diameter and inspected for conformity, the result is stable gauging that shortens inspection time and reduces the risk of downstream rework. Durable workshop design for long service life Built as a workshop version, the pin combines hardening and a special steel composition to resist wear from repeated engagement. The robust finish preserves the critical diameter and ensures the prescribed tolerance remains within limits over many cycles. Delivered in a protective transport case, the item arrives ready for use and for secure storage between shifts, reducing accidental damage and preserving gauge integrity in a busy shop environment. Simple integration into inspection routines The compact geometry and 50 mm length make the test pin straightforward to use with existing fixtures, bench gauges and calipers for end‑dimension verifications. Traceable identification (GTIN and SKU) and consistent handling characteristics make it easy to incorporate the component into quality control plans and inspection logs. For workshop situations where repeatable end‑measurements are required, this inspection pin is an efficient, low‑complexity tool that complements optical or dimensional measuring equipment. For reliable end‑dimension gauging with Metav IndustryLine precision, contact Metav Werkzeuge in Emmerich for individual advice and prompt delivery — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: M323.726 GTIN: 4061905059216 Label: Prüfstift, einzeln, 7,26mm, +/- 0.001 mm Länge 50 mm Category: Gauge pin / inspection pin Facts Diameter: 7.26 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Special features Workshop version Material: special steel Delivered in protective transport case Accuracy class: sub‑micrometre inspection pin FAQ What applications suit this inspection pin best? This inspection pin is intended for end‑dimension checks, seat and bore verification and short‑range plug gauging in workshop and small‑series production environments; the M323.726 gauge pin from Metav IndustryLine is particularly suited to precise end‑measurements. Is the pin supplied ready for immediate use? Yes, the M323.726 is supplied in a protective transport case ready for inspection tasks; note that no additional on‑site demonstration is provided. Which material is the pin made from and why does that matter? The pin is made from a special steel selected for wear resistance and dimensional stability, which helps maintain the specified tolerance during repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com