Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
7.74mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme measurement accuracy, compact workshop design and low weight to streamline end‑dimension inspections; order the test pin directly via Metav Werkzeuge or consult our advisors for specification support. M323.774 test pin — 7.74 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) M323.774 is a single workshop‑grade test pin intended for precise end‑dimension checks and repeatable reference measurements in production and quality control. Workshop version for industrial use High repeatability at ±0.001 mm tolerance Diameter precisely 7.74 mm Compact 50 mm length, low weight 0.023 kg Precision that stabilises production quality The M323.774 delivers an exceptional tolerance of ±0.001 mm, which places it in the high‑precision category for gauge pins. Such accuracy reduces measurement uncertainty during end‑dimension checks and supports consistent pass/fail decisions on the production line. The pin's nominal diameter of 7.74 mm provides a defined reference for plug‑gauge comparisons and alignment steps; using a stable reference like this shortens inspection cycles and lowers the risk of scrap or rework, offering a clear efficiency advantage in repetitive quality tasks. Robust workshop design for practical handling Designed as a workshop version, the pin is machined from special steel to ensure dimensional stability and durable contact surfaces under routine use. The 50 mm length and weight of 0.023 kg make the gauge easy to position by hand or in fixtures while keeping thermal mass low—advantages that reduce operator fatigue and minimise thermal drift during quick successive checks. The solid construction supports repeated seating in gauges and jigs without loss of roundness or concentricity, preserving measurement integrity over time. Integrates smoothly into inspection workflows As a single‑piece reference pin, this product simplifies integration with comparative inspection methods such as plug gauges, optical comparators and tactile probing routines. The defined tolerance and dimensions enable straightforward documentation in inspection plans and traceability records; labelling with GTIN and SKU facilitates inventory control. By providing a consistent physical standard, the pin helps to reduce calibration turnaround and speeds up process control decisions, contributing to measurable time savings across inspection stations. Procurement reliability and manufacturer backing Supplied as a single unit and included in the Metav IndustryLine range, the pin benefits from Metav's focus on dependable supply and quality control. The compact specification and unambiguous dimensional data make ordering and stock management straightforward for procurement teams. Metav's established distribution in Emmerich supports reliable delivery and an accessible quality filter for the European market, reinforcing operational continuity for workshops and small series production alike. For ordering and bespoke advice on the M323.774 from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for prompt technical guidance and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.774 GTIN: 4061905063534 Label: Test pin, single, 7.74 mm, ±0.001 mm, length 50 mm Facts Diameter: 7.74 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Material: special steel Workshop version Supplied as single unit FAQ What is the measurement tolerance of this test pin? The M323.774 test pin is manufactured to a tolerance of ±0.001 mm, providing high repeatability for end‑dimension inspections. Which material is used for the pin? This Metav IndustryLine test pin is made from special steel, selected for dimensional stability and durability under workshop conditions. How long is the test pin and how does that affect handling? With a length of 50 mm and low mass, the pin is easy to position manually or in a fixture while keeping thermal influence and operator fatigue to a minimum. Can the pin be used as a reference in plug‑gauge checks? Yes, the defined diameter of 7.74 mm and the tight tolerance make the pin suitable as a reference for plug‑gauge comparisons and related workshop checks. Is the M323.774 supplied individually or in sets? The M323.774 is supplied as a single unit for straightforward replacement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.75mm Gauge Pin, ±0.001mm Accuracy, Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of ultra‑fine dimensional control, robust workshop design and compact handling to ensure consistent end‑dimension verification. The single 7.75 mm gauge pin with ±0.001 mm tolerance and 50 mm length supports reproducible pass/fail checks and fixture references — order the pin directly via Metav Werkzeuge or consult our advisors for application advice. Gauge pin M323.775 — 7.75 mm, ±0.001 mm, 50 mm (Metav IndustryLine) Gauge pin M323.775 is a precision measurement pin designed for end‑dimension checks and fixture references in workshop and inspection environments. High precision ±0.001 mm Diameter 7.75 mm measurement pin 50 mm overall length Workshop version, robust steel Sub‑micron accuracy for repeatable end‑dimension checks The M323.775 is specified to ±0.001 mm, a tolerance that places it in the µm‑class of hand‑held inspection pins. Such a level of control makes the component suitable as a reference for final size verification and for comparing against plug gauges or bore masters. The compact 7.75 mm diameter, combined with a 50 mm usable length, delivers a stable contact area for end‑face and through‑hole checks while limiting bending moments — a clear technical advantage when consistency and repeatability are essential in quality control. Robust workshop design that eases handling and fixture use Built in a workshop version with special steel construction, the pin resists wear under routine inspection use and retains dimensional integrity in everyday production environments. Its single‑piece configuration is suited to mounting in quick‑change fixtures, test stands or hand gauges where a compact reference is required. The weight and 50 mm length strike a balance between tactile handling and rigidity, reducing user‑induced measurement scatter when used for fast go/no‑go checks or as an end‑stop reference in assembly operations. Clear role within inspection and process control workflows Incorporating this gauge pin into routine inspections tightens process feedback loops: the defined diameter and micron tolerance simplify acceptance criteria, and the small footprint allows multiple pins to be staged for serial testing. The product’s GTIN and SKU support traceability in inventory and quality records, facilitating consistent part identification in audits. For workshops seeking a compact, high‑precision reference for end‑dimension verification, the M323.775 serves as a reliable mechanical benchmark in downstream quality assurance. For tailored recommendations or fixture compatibility, contact Metav Werkzeuge for application guidance and purchase options — Metav Werkzeuge’s specialists will advise on the best inspection setup for specific end‑dimension requirements Technical Data SKU: M323.775 GTIN: 4061905060106 ECLASS: 21170231 Diameter: 7.75 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Material: Special steel Workshop execution Category: Gauge pins FAQ What is the intended use of this gauge pin? The M323.775 gauge pin is intended for end‑dimension verification, fixture referencing and go/no‑go checks where a precise 7.75 mm reference with ±0.001 mm tolerance is required. Can the pin be used as a benchmark in production fixtures? Yes. The workshop design and special steel construction make the pin suitable for mounting in fixtures and test stands as a mechanical benchmark for repeatable checks. How should the measurement pin be handled to maintain accuracy? Handle the measurement pin with clean hands or gloves, avoid impacts, and keep the contact faces free of debris; regular inspection against a master gauge will preserve the pin’s ±0.001 mm performance. Is the gauge pin suitable for optical or tactile comparator checks? The pin’s defined diameter and length make it appropriate as a reference artefact for both optical and tactile comparator assessments, supporting clear pass/fail criteria. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.76mm Gauge Pin, ±0.001mm Tolerance, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of micrometric accuracy and robust construction: a compact 7.76 mm gauge pin with ±0.001 mm tolerance and a 50 mm working length for reliable end‑dimension checks; order directly via Metav Werkzeuge or consult our technical advisers for application advice. M323.776 — Single gauge pin 7.76 mm, ±0.001 mm (Metav IndustryLine) A M323.776 single gauge pin designed for precise end‑dimension verification and workshop metrology applications, ideal where repeatable, traceable reference measurements are required High precision ±0.001 mm tolerance Solid special‑steel construction Supplied in protective transport case Accuracy that reduces rework and inspection time The compact inspection pin delivers ±0.001 mm accuracy over a 50 mm length, making it suitable for fine tolerance checks where repeatability matters. As a solid reference element, the pin minimises uncertainty during go/no‑go assessments and comparative measurements. The tight tolerance shortens checking cycles and reduces the likelihood of false rejects, supporting more efficient production control and fewer corrective actions on the shop floor. The result is measurable time savings and fewer interruptions to workflow. Built for frequent workshop use Manufactured from special steel, this precision pin resists wear while maintaining the required surface finish for accurate contact measurements. The workshop‑grade execution is tailored for everyday handling and storage conditions; a protective transport case is included to preserve dimensional integrity between uses. The compact geometry and modest mass facilitate rapid handling and alignment in fixtures, while the durable material allocation keeps the pin serviceable over many inspection cycles. Practical fit for metrology benches and fixtures Classified within the micro range for small‑part measurement, the pin is well suited to precision inspection tasks such as end‑dimension checks, plug gauges, and calibration references for small bores. Its compact diameter of 7.76 mm and single‑piece delivery format make it straightforward to integrate into jigs or bench setups. For operations that demand consistent reference standards, this precision pin provides a stable datum that simplifies measurement procedures and supports reliable quality documentation. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this precision gauge pin into inspection routines or to arrange supply and logistics directly through our specialist team Technical data Article number: M323.776 GTIN: 4061905060113 Product label: Prüfstift, einzeln, 7,76mm, +/- 0.001 mm Länge 50 mm Category: Gauge pin (single) Facts Diameter: 7.76 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Material: special steel Workshop version Supplied in protective transport case Single piece delivery FAQ What level of precision can be expected from this gauge pin? The gauge pin delivers a tolerance of ±0.001 mm, making it suitable for high‑precision end‑dimension checks and repeatable reference measurements. Is the pin suitable for regular workshop use? Yes. The workshop execution and special steel construction of the M323.776 ensure durability for frequent handling and inspection cycles. Can this pin be used as a reference in fixture setups? Yes. The compact 7.76 mm diameter and single‑piece format make the pin appropriate as a fixed datum or comparative reference in jigs and fixtures. How is the pin delivered to protect its dimensions? The product is supplied in a protective transport case to preserve surface condition and dimensional stability during storage and transport. Which industries or applications typically use this type of gauge pin? Typical uses include small‑part inspection, end‑dimension verification, plug gauge calibration, and precision assembly checks in machine building, toolmaking and quality control labs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.77mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
The precision 7.77 mm diameter and ultra‑tight ±0.001 mm tolerance, combined with the 50 mm length and workshop specification, make this gauge pin ideal for reliable end‑measure verification; order directly via Metav Werkzeuge or consult the technical team for application advice. M323.777 Gauge Pin — 7.77 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The M323.777 is a precision gauge pin designed for accurate end‑measure checks and inspection tasks in workshop and production environments. Diameter 7.77 mm with ±0.001 mm tolerance Length 50 mm in workshop version Manufactured from special steel Supplied individually for traceable inspection Consistent final‑dimension checks that reduce rework A straight, hardened inspection pin with a nominal diameter of 7.77 mm and an accuracy of ±0.001 mm provides a measurable improvement in repeatability for final‑dimension controls. The close tolerance reduces uncertainty during plug and end‑mass verification, so measurement variability is minimised and corrective loops in production are shortened. The solid geometry of the pin translates directly into reproducible seating in bores and fixtures, supporting rapid go/no‑go decisions without additional setup time. Robust workshop design for dependable handling Made from special steel and specified as a workshop version, this precision pin balances wear resistance with handling convenience for everyday inspection tasks. At a nominal mass of 0.023 kg, the item is easy to manoeuvre while retaining sufficient rigidity for precise seating. Supplied as an individual unit, the component is suitable for insertion into inspection nests, test jigs or as a reference element in assembly checks, delivering a pragmatic combination of durability and practicality for busy metrology stations. Seamless fit into standard inspection workflows Designed for end‑measure applications, the pin integrates with common measuring setups such as dial indicators, height gauges and comparator fixtures, enabling fast cross‑checks against master gauges or reference blocks. The controlled diameter and fine tolerance support precise datum definition for component inspection and tooling alignment, helping to maintain quality across batches. Using such a standardised inspection element streamlines documentation and reporting, contributing to traceable quality routines in manufacturing. Choose the Metav IndustryLine M323.777 gauge pin for workshop‑grade precision; contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.777 GTIN: 4061905060120 Brand: Metav IndustryLine Facts Diameter: 7.77 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.023 kg eClass: 21170231 Special features Material: Special steel Workshop version Supplied individually Precision end‑measure application FAQ What is the dimensional tolerance of this gauge pin? The M323.777 gauge pin is specified with a dimensional tolerance of ±0.001 mm, ensuring high‑precision end‑measure controls. Which material is used for the inspection pin? The inspection pin is manufactured from special steel, chosen for wear resistance and stable bore seating in workshop environments. Is the pin suitable for production spot checks? Yes, the M323.777 is intended for end‑measure verification and integrates smoothly into production inspection routines and test fixtures. How is the pin supplied? The product is supplied as an individual precision pin to support traceable use in inspection and metrology workflows. Can the pin be used with standard gauge blocks and fixtures? The pin’s controlled diameter and consistent length make it compatible with common gauge blocks, nests and comparator fixtures for routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.78mm Gauge Pin, Workshop Version, ±0.001mm Tolerance, 50mm Length - Metav IndustryLine
Combine workshop-grade robustness with ±0.001 mm accuracy and a compact 7.78 mm diameter for dependable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Gauge pin M323.778 — Single test pin, 7.78 mm, ±0.001 mm The Gauge pin M323.778 is a workshop‑grade precision test pin designed for accurate end‑dimension verification and fixture alignment in production and inspection environments. Workshop-grade precision test pin ±0.001 mm accuracy Diameter 7.78 mm for fine end‑dimension checks Length 50 mm for fixture and gauge use Supplied in a transport case for secure handling Reassuring accuracy for end‑dimension verification A compact gauge pin with a declared tolerance of ±0.001 mm, the component delivers high repeatability for critical end‑measurements. The stated accuracy corresponds to industrial micro‑tolerances and supports reliable pass/fail decisions at the inspection station. The use of special steel ensures dimensional stability and resistance to wear under normal workshop conditions, so the pin maintains consistent results through routine use. Compact geometry that fits fixtures and gauges With a nominal diameter of 7.78 mm and a usable length of 50 mm, the test pin is tailored for integration into gauges, alignment procedures and small jigs. The compact format reduces handling complexity while the low mass (approx. 0.023 kg) eases positioning in clamped setups. Supplied in a protective transport case, the pin arrives ready for safe storage and transit between bench and production line. Practical benefits for production control and traceability Used as a go/no‑go reference or as an end‑dimension master, the pin streamlines inspection steps and lowers the risk of downstream rework by identifying deviations early. The workshop‑grade build and uniform surface finish support consistent contact and reliable measurements when compared with calibrated masters. For manufacturers seeking an economical way to enforce dimensional limits, the test pin offers a tangible improvement in process control and part conformity. Contact Metav Werkzeuge for application support and to secure the M323.778 gauge pin directly from stock; specialists are available to advise on integration into existing gauges and inspection routines. Technical Data Article number: M323.778 GTIN: 4061905060915 Manufacturer: Metav IndustryLine Core specifications Diameter: 7.78 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Workshop‑grade execution Material: special steel Supplied in transport case Single test pin for end‑dimension checks FAQ What material is the pin made from and why is that important? The M323.778 gauge pin is made from special steel, chosen for its dimensional stability and wear resistance, which keeps the pin accurate for repeated end‑dimension checks. Is the accuracy of ±0.001 mm suitable for production inspection? Yes, the declared ±0.001 mm tolerance makes the M323.778 suitable for high‑precision workshop controls and fine tolerance checks in production environments. Can the pin be used in custom gauges or fixtures? The 7.78 mm diameter and 50 mm length allow the M323.778 test pin to be integrated into bespoke gauges, alignment tools and fixture setups where a compact, precise reference is required. How is the gauge pin delivered and stored? The M323.778 is supplied in a protective transport case to reduce handling damage during transit and storage and to help preserve its precision surface. What is the article number and who supplies it? The gauge pin is listed as article M323.778 and is part of the Metav IndustryLine range, supplied via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.79mm Gauge Pin ±0.001 mm, 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, 7.79 mm diameter and robust special steel construction for repeatable end‑measurement and assembly checks; delivered ready for transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or consult the specialists for integration into inspection routines. Gauge pin M323.779 — single precision gauge pin, 7.79 mm diameter, ±0.001 mm accuracy A gauge pin designed for precision end measurements and reference fitting in inspection benches, toolrooms and assembly jigs. High‑precision tolerance ±0.001 mm Diameter exactly 7.79 mm 50 mm overall length Delivered in transport case Consistent measurement where microns matter The manufacturing tolerance of ±0.001 mm delivers a level of dimensional reliability that reduces measurement uncertainty and matching errors during final inspection. A hardened, wear‑resistant special steel shaft ensures the pin maintains its geometry under repeated seating and withdrawal operations, so reference fits remain dependable. This precision component suits tasks where a consistent plug fit or go/no‑go reference is required, and its tight tolerance assists in maintaining process capability indices in quality control. Workshop‑ready design for fast handling and storage With an overall length of 50 mm and compact mass, the pin is easy to position manually or in automation end‑stations, shortening setup time and improving throughput. The workshop version specification focuses on robust handling rather than fragile lab formats, and the supplied transport case protects the surface finish during storage and movement. The attention to handling and packaging supports straightforward integration into inspection sets and gauge blocks without additional preparation. Integrating a reliable reference into inspection workflows A clear article identity (SKU: M323.779) and GTIN ensure traceability within stock and quality systems, simplifying inventory and audit trails. The gauge pin functions as a precise end‑measure reference or a plug for bore verification in jigs and fixtures, complementing micrometric instruments and calipers during final acceptance. Selecting components from a recognised metrology range helps standardise inspection outcomes across shifts and sites, supporting consistent production quality and reduced rework rates. Contact Metav Werkzeuge today to specify the Metav IndustryLine gauge pin M323.779 for precision end‑measure applications and to confirm delivery with protective transport packaging Technical data SKU: M323.779 GTIN: 4061905060922 Label: Prüfstift, einzeln, 7,79mm, +/- 0.001 mm Länge 50 mm Category: Messstifte (gauge pins) Manufacturer: Metav IndustryLine Core technical figures Diameter: 7.79 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.023 kg Special features and materials Material: special steel Workshop version Supplied as a single gauge pin Delivered in a plastic or wooden transport case FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.779 from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm. Which applications suit this size and tolerance? This 7.79 mm pin is intended for end measurements, reference fits and bore verification where micron‑level repeatability is required. Is the gauge pin supplied ready for storage and transport? Yes, the M323.779 is delivered in a protective transport case to preserve surface quality during handling and storage. What material is used and how does it affect wear? The pin is made from special steel, chosen for dimensional stability and resistance to wear under repeated seating operations. How is the product identified within stock systems? Identification is via SKU M323.779 and GTIN 4061905060922, facilitating inventory tracking and audit documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.7mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, sub-micron ±0.001 mm accuracy and a compact 50 mm length for reliable end-measurement checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin M323.770 — 7.70 mm, ±0.001 mm accuracy (Metav IndustryLine) A gauge pin M323.770 designed for precision end-measurement checks and validation tasks in workshop and production environments Workshop version for robust use Diameter 7.70 mm with ±0.001 mm tolerance 50 mm length for deeper inspection Supplied in protective transport case Repeatable precision for tight tolerances The cylindrical inspection pin delivers ±0.001 mm concentric accuracy on a 7.70 mm diameter, enabling repeatable checks where tight end measurements are required. Such tolerance is suitable for fine mechanical verification and quality gates in component inspection; the result is reliable pass/fail decisions and reduced rework. The combination of compact geometry and high dimensional stability supports precise contact with gauges, fixtures or measurement benches while keeping handling straightforward. Built for workshop handling and transport Manufactured in special steel and specified as a workshop version, the pin tolerates regular use in industrial environments without compromising geometry. Its 50 mm length allows access into deeper bores and features while remaining easy to manipulate by hand or in simple jigs. Delivery in a protective case ensures safe transport and prevents accidental damage to the measurement surface, so accuracy is preserved between uses and during storage. Efficient integration into inspection routines As a precision gauge pin, this item simplifies go/no‑go and reference measurements on end faces and bores and shortens inspection cycles through a compact, ready‑to‑use format. The clear specification and compact footprint make it suitable for use in small-series manufacturing, incoming inspection and assembly verifications. Stocking the Metav IndustryLine version can streamline procurement and reduce lead times thanks to central supply from Emmerich, backed by Metav’s quality filter for European distribution. For workshop-grade, sub-micron end-measurement requirements, contact Metav Werkzeuge to request the Metav IndustryLine M323.770 gauge pin and benefit from our local stock and expert advice. Technical Data Article number: M323.770 GTIN: 4061905062407 Weight: 0.023 kg Key measurements Diameter: 7.70 mm Length: 50 mm Tolerance: ±0.001 mm Materials & features Material: Special steel Workshop execution Supplied in protective transport case Single test pin FAQ What tasks is this precision pin intended for? The Metav IndustryLine gauge pin M323.770 is intended for end-measurement checks, bore verification and spot inspections where a high-accuracy cylindrical reference is required. Is the stated tolerance of ±0.001 mm realistic for workshop use? Yes — the specified ±0.001 mm tolerance reflects the pin's manufacturing class and is suitable for precise inspection tasks and tight tolerance comparisons in production environments. How is the pin protected during transport and storage? The item is supplied in a protective transport case as a workshop-grade pin, which preserves the measurement surface and prevents handling damage between uses. Can this pin be used in jigs and fixtures? The compact geometry and stable material make the pin suitable for incorporation into simple fixtures and reference setups for repeatable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.81mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop robustness, ultra‑fine tolerance and transport protection for reliable fit checks and repeatable end‑measurements; order directly via Metav Werkzeuge or request further technical advice from our consultants. Gauge pin M323.781 — 7.81 mm, ±0.001 mm, Metav IndustryLine Gauge pin M323.781 is a precision inspection pin for end‑measurements and fit verification in workshop metrology Diameter 7.81 mm, tolerance ±0.001 mm Length 50 mm workshop execution Made from special steel Delivered in protective transport case Precision that secures interchangeability The pin offers a diameter of 7.81 mm with a tolerance of ±0.001 mm, which corresponds to micrometric accuracy suitable for high‑precision fit checks and end‑measurements. Such fine tolerance reduces the risk of part rejection and rework by guaranteeing reproducible seating and clear go/no‑go assessment. The narrow deviation band makes the pin a reliable reference for quality control tasks where component interchangeability and tight clearances are critical. Robust design for regular workshop use Produced as a workshop execution, the inspection pin combines compact geometry with resilient special steel construction. The 50 mm length and low mass support straightforward handling during repeated measurements on the shop floor, while the chosen material improves resistance to wear in frequent contact applications. This robustness translates into longer service life and fewer interruptions for replacement, supporting continuous production processes. Ready for transport and mobile use The delivery includes a protective transport case, which keeps the pin secure during storage and on the move between workstations or service visits. The compact packaging prevents accidental damage and helps maintain the certified geometry. The component is identified as M323.781 for clear traceability within an inspection kit or inventory system, aiding documentation and part management across production sites. Practical applications and measurement practice Intended for plug‑type fit checks, end‑measurements and inspection routines, the pin is suitable for setting gauges, verifying bore sizes and confirming mating dimensions on assemblies. Its fine tolerance supports quality assurance tasks in precision engineering and small‑batch manufacturing. Used as a handheld inspection artefact, the pin offers a simple, low‑overhead method to validate critical diameters without complex fixtures, contributing to faster decision cycles on the shop floor. For workshop‑grade precision and purchasing support, contact Metav Werkzeuge for tailored advice and supply: Metav IndustryLine via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.781 GTIN: 4061905060946 Diameter: 7.81 mm Tolerance: ±0.001 mm Length: 50 mm Material: Special steel Weight: 0.023 kg Version: Workshop execution Facts High dimensional accuracy Low mass for easy handling Suitable for go/no‑go and fit verification Compact, transportable format Special features Protective transport case included Workshop execution for frequent use Clear traceability via SKU and GTIN FAQ What tolerance does this inspection pin offer? The inspection pin is manufactured to a tolerance of ±0.001 mm, providing micrometric accuracy for precise fit checks with the M323.781 gauge pin. Is the pin supplied ready for transport between workstations? Yes, the product is delivered in a protective transport case to preserve geometry and facilitate safe transfer on the shop floor. Which materials is the pin suitable for checking? The M323.781 pin is a dimensional reference for measuring bores and mating parts; material compatibility depends on the workpiece, as the pin itself is made of special steel and intended for contact measurement applications. Can this pin be used as a setting master for other gauges? The pin serves well as a portable setting reference for gauge blocks and plug gauge assemblies, offering a compact alternative for in‑process checks and quick calibration aids. How is the product identified for procurement and inventory? The item is listed under SKU M323.781 with GTIN 4061905060946 for unambiguous ordering and stock management. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.82mm Gauge Pin, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
The combination of 7.82 mm diameter, ±0.001 mm tolerance and robust special steel construction delivers consistent end‑dimension verification and repeatable fixture checks; order the gauge pin directly via Metav Werkzeuge or ask the consultants for tailored measurement advice. Gauge pin M323.782 — workshop-grade checking pin, 7.82 mm ±0.001 mm The Gauge pin M323.782 is a single-piece, workshop-grade checking pin designed for precise end‑dimension inspection and fixture alignment in industrial metrology. Workshop-grade checking pin Diameter 7.82 mm, tolerance ±0.001 mm Length 50 mm for fixture use Made from special steel Precise control for end-dimension inspection This checking pin offers ±0.001 mm tolerance on a 7.82 mm diameter, enabling confident pass/fail checks and high-resolution gauging where minimal clearance is critical. The small form factor is intended for end‑dimension verification and alignment tasks in jigs, fixtures and inspection benches. By specifying a tight tolerance and a defined length of 50 mm, the component reduces measurement uncertainty and simplifies go/no‑go decisions during assembly and final inspection, supporting faster cycle times and fewer reworks. Practical integration into workshop workflows Supplied as a single, workshop‑rated piece made of special steel, this checking pin is suited to rougher handling while maintaining dimensional stability. The 50 mm length provides adequate engagement for many clamping and fixture setups without compromising accessibility, and the compact mass assists in intuitive placement during repetitive checks. In practice, the gauge pin functions as a dependable reference for end‑measurements and alignment tasks, streamlining inspection routines and reducing the need for complex fixturing. Reliability, traceability and purchasing confidence Built for repeatable results, the component’s nominal values and declared ±0.001 mm accuracy support documented inspection procedures and quality records. Metav IndustryLine’s positioning as a precision partner emphasises consistent supply and an industrial quality filter for the European market, which benefits workshops and production lines requiring reliable metrology equipment. The robust material choice and workshop specification combine to offer both durability and measurement integrity, creating long‑term value in production and maintenance environments. For specific application advice or to request a quotation for the Metav IndustryLine gauge pin M323.782, contact Metav Werkzeuge in Emmerich for personalised technical guidance and supply options. Technical data Article number: M323.782 GTIN: 4061905060953 Label: Prüfstift, einzeln, 7,82mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 7.82 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.023 kg Measurement range: 7.82 mm Special features Material: Special steel Workshop version Single item supply Accuracy: ±0.001 mm FAQ What is the declared tolerance of this gauge pin? The declared tolerance is ±0.001 mm for the gauge pin M323.782 supplied by Metav IndustryLine. Which material is used for the checking pin? The checking pin is made from special steel, selected for dimensional stability and workshop durability. For which tasks is this pin intended? The pin is intended for end‑dimension inspection, fixture alignment and simple go/no‑go checks in jigs and assembly fixtures. Is the item supplied as a single piece or in sets? This product is supplied as a single item, described in the label as an individual checking pin. Does the product data include a calibration certificate? No calibration certificate is specified in the provided product data for this gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.83mm Gauge Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
A compact, workshop-grade gauge pin offering ±0.001 mm repeatability and a precise Ø 7.83 mm diameter in a 50 mm length; the robust special-steel construction supports frequent go/no-go checks and small-bore inspections. Order directly via Metav Werkzeuge or consult the Metav team for technical advice and rapid supply. Test pin M323.783 — gauge pin, Ø 7.83 mm, ±0.001 mm The Test pin M323.783 is a workshop-grade precision gauge pin intended for small-bore inspection, end-measurements and plug-gauging tasks in production and maintenance environments. Workshop-grade precision ±0.001 mm Diameter 7.83 mm, length 50 mm Special-steel construction for wear resistance Reproducible inspection where micrometre precision matters High-precision tolerance is the defining feature: ±0.001 mm accuracy ensures measurements are stable across repeated checks and reduces uncertainty in incoming inspection or in-process control. The tight tolerance is significantly finer than common workshop gauges and supports reliable go/no-go assessments, enabling faster decision-making on acceptance or rework. This technical certainty translates into fewer false rejects and a more consistent quality flow in small-part production. Robust construction tailored to workshop routines Designed as a workshop-grade tool, the pin is manufactured from special steel chosen for dimensional stability and everyday durability. The solid construction eases handling and resists wear during repetitive insertion into bores or fixtures, preserving the measuring edge and extending service life. Compact mass and balanced weight offer steady placement in jigs and test fixtures, so inspections remain repeatable even under frequent use. Easy identification and seamless integration into inspection flows With a Ø 7.83 mm diameter and 50 mm length, the pin provides the reach required for many small-bore checks while remaining manageable in handheld and fixture-based operations. Identification is straightforward for procurement and inventory: SKU M323.783 and GTIN 4061905060960 are available for catalogue and ordering systems. The single-item supply suits targeted replacements within inspection sets and helps maintain traceability in quality records. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine M323.783 test pin into inspection routines or to request a quotation from our metrology specialists Technical data SKU: M323.783 GTIN: 4061905060960 Material: Special steel Tolerance: ±0.001 mm Diameter: 7.83 mm Length: 50 mm Weight: 0.023 kg Facts Diameter: 7.83 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Workshop-grade design Single-item supply Special-steel construction Category: Gauge pins (Messstifte) SKU for ordering: M323.783 FAQ What tolerance does this gauge pin provide? The M323.783 test pin is specified to ±0.001 mm, making it suitable for high-precision plug-gauging and critical small-bore inspections. Which applications suit this pin best? Typical uses include small-bore inspection, end-measurements, plug-gauging and fixture checks where tight dimensional control is required. What material is the pin made from? The pin is manufactured from special steel, selected for dimensional stability and wear resistance during frequent use. How is the part identified for ordering? Use SKU M323.783 or GTIN 4061905060960 when ordering or entering the item into inventory systems. Is this pin a workshop or laboratory product? The design is workshop-grade, optimised for robustness in production and maintenance environments while maintaining high precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.84mm Precision Plug Gauge ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade accuracy and a compact form factor: the pin’s 7.84 mm diameter with a ±0.001 mm tolerance and a 50 mm overall length provides reliable end‑dimension verification for fixtures and bore checks. Supplied in a protective transport case and made from special steel, this precise test pin supports stable inspection routines and helps reduce rework. Order via Metav Werkzeuge or contact the consultants for availability. Gauge pin M323.784 — 7.84 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.784 is a single, workshop‑grade inspection pin intended for end‑dimension and bore verification in precision metrology and production environments. Workshop-grade precision component Diameter 7.84 mm, tolerance ±0.001 mm Length 50 mm for end‑dimension checks Supplied in protective transport case Improve first-pass yield with micrometre-level repeatability A tolerance of ±0.001 mm (one micrometre) shifts inspection from routine checking to precision control, reducing uncertainty at critical interfaces. The tight tolerance supports efficient in‑process verification and shortens corrective loops, which in turn lowers scrap and rework rates. Because the tolerance is expressed as a direct manufacturing specification, the benefit is immediate: consistent pass/fail decisions and confidence when setting up or approving mating parts. Durable construction for everyday workshop use Constructed from special steel, the gauge pin withstands repeated handling and contact with typical workshop fixtures. The material choice balances wear resistance with dimensional stability, so the pin retains its accuracy over many cycles. Supplied as a workshop version, it is intended for regular inspection tasks rather than delicate laboratory-only work; the robustness translates into fewer replacements and predictable performance on the shop floor. Compact format for precise end‑dimension checks With a 7.84 mm diameter and a 50 mm overall length, the pin fits tight bores and narrow access paths while providing sufficient engagement for stable measurements. Its compact form makes it particularly suitable for plug checks, alignment of tooling, and verification of end measures where larger gauges would be unwieldy. The straightforward geometry ensures accurate seating and repeatable contact during manual or fixture‑aided inspection. Practical delivery and handling that support workflows The pin is supplied in a protective transport case to reduce transit damage and simplify storage. Lightweight at 0.023 kg, it is easy to integrate into inspection kits and benches. Marked and traceable labelling facilitates inventory control and quick identification during batch inspections. These practical features smooth daily processes and support a predictable quality routine without adding administrative overhead. For workshop measurement tasks that demand micrometre accuracy, contact Metav Werkzeuge to request availability and delivery details for the Metav IndustryLine gauge pin M323.784. Technical data Article number: M323.784 GTIN: 4061905060977 Label: Prüfstift, einzeln, 7,84mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.84 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Material: Spezial-Stahl Workshop version Supplied in protective case FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.784 delivers an accuracy of ±0.001 mm, meaning measurement decisions can be taken with micrometre‑level confidence. Is the pin suitable for repeated use in a production environment? Yes, the Metav IndustryLine gauge pin M323.784 is a workshop‑grade tool made from special steel, designed for frequent handling and routine inspection tasks. Can this pin be used for bore verification and alignment checks? The 7.84 mm diameter and 50 mm length make this pin suitable for bore verification, plug checks and basic alignment of tooling during setup. How is the product delivered and stored? Delivery includes a protective transport case to reduce risk of damage and to simplify storage of the gauge pin M323.784. What does the label on the product indicate about its purpose? The label describes a single inspection pin for end‑dimension checks; the specification focuses on its diameter, tolerance and length for precision applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.85mm Test Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of high-precision tolerance, compact geometry and robust workshop execution for reliable end‑measurements under routine production conditions; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.785 – single precision pin Ø 7.85 mm ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin designed as a workshop‑grade measuring element for end‑measurement and go/no‑go checks in inspection and assembly processes. Workshop version, robust execution Diameter 7.85 mm, tolerance ±0.001 mm Length 50 mm for compact measurement setups Supplied in a transport box for safe handling Precise control where micrometres are impractical The core benefit of this measuring element is repeatable precision: with a tolerance of ±0.001 mm, the pin provides a defined reference for end‑measurement and fit checks where micrometre access is limited. The compact geometry and low mass support quick positioning and rapid verification in production sequences, ensuring component acceptance criteria are confirmed without time‑consuming set‑ups. This makes the item especially valuable for batch testing and final inspection steps where speed and certainty are required. Consistent results through stable material properties Manufactured from special steel, the pin maintains dimensional stability under typical workshop conditions and resists premature wear during repeated contact checks. The material choice supports sustained contact quality across many cycles, which reduces measurement drift and the need for frequent replacement. The combination of material and machining precision translates into fewer rejects and a more predictable quality flow for parts that rely on accurate end dimensions. Practical handling and workplace integration At 50 mm overall length the pin fits easily into standard inspection fixtures and handheld gauges while occupying minimal bench space. The compact format simplifies storage and handling when several sizes are in rotation. Delivery in a protective transport box safeguards the reference surface during transit and storage, preserving metrological integrity until the first use. The single‑piece design supports straightforward use in assembly jigs and bench fixtures without additional adapters. Suited applications and process advantages This precision pin is intended for short‑run checks, alignment tasks and go/no‑go assessments across machining, tooling and quality assurance workflows. Using a defined gauge element like this reduces ambiguity in pass/fail decisions and shortens inspection time per part, which improves throughput. The robust workshop specification balances accuracy with durability, making it a pragmatic choice where reliable end‑measurements are required on the shop floor. For ordering and tailored application advice contact Metav Werkzeuge — Metav IndustryLine specialists are available to recommend the right measuring element for specific inspection tasks and production environments. Technical data Article number: M323.785 GTIN: 4061905061127 Brand: Metav IndustryLine Facts Diameter: 7.85 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Single gauge pin for end‑measurement Material: special steel Workshop execution for robust use Supplied in transport box (plastic or wood) FAQ Is this pin suitable for end‑measurement of shafts and bores? The gauge pin M323.785 is designed for end‑measurement and fit checks; its Ø 7.85 mm geometry and ±0.001 mm tolerance make it appropriate for verifying shaft ends and bore gauges in routine inspections. How durable is the measuring surface during repeated use? Made from special steel, the pin resists wear under normal workshop use; the construction supports consistent contact quality over many cycles when handled and stored correctly. Can the pin be used in assembly fixtures or jigs? Yes, the compact 50 mm length and single‑piece format allow easy integration into assembly fixtures and jigs for alignment and go/no‑go assessments. Is calibration included with the delivery? This item is supplied as a precision workshop gauge without an ISO 17025 calibration certificate; handling in the protective transport box helps maintain its reference condition until verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.86mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
A compact precision solution for end‑dimension checks: the 7.86 mm test pin combines a tight ±0.001 mm tolerance with a 50 mm gauge length and robust special steel construction for reliable, repeatable measurements in workshop environments. Order directly via Metav Werkzeuge or consult Metav’s specialists for technical matching and fast supply. Gauge pin M323.786 — 7.86 mm, ±0.001 mm tolerance (Metav IndustryLine) Gauge pin M323.786 for end‑dimension verification and fixture inspection in production and workshop metrology Nominal diameter 7.86 mm Tolerance ±0.001 mm Length 50 mm for fixture and end‑measure checks Workshop design, robust construction Consistent results for end‑dimension verification The gauge pin delivers a 7.86 mm nominal diameter with an outstanding ±0.001 mm tolerance, enabling precise verification of end dimensions and fit gauges. Such a narrow tolerance significantly reduces uncertainty in pass/fail checks and dimensional audits; the tight specification is ideal for final measurement steps where minute deviations matter. Built from special steel, the pin resists wear and maintains form over repeated insertions, which helps preserve measurement integrity across production runs. Designed for practical workshop use This single test pin is supplied as a compact, usable instrument for everyday inspection work. The 50 mm length offers sufficient reach for common fixture and bore checks while remaining straightforward to handle and position. The workshop version construction balances robustness and ease of use, minimising the need for frequent replacements and supporting efficient inspection routines on the shop floor. The modest mass ensures safe, controlled handling during manual measurements. Integration into quality workflows The pin’s specification supports rapid incorporation into standard measurement procedures and gauges. As a single‑piece precision pin, it suits end‑of‑line checks, go/no‑go fixtures and dimensional verification during assembly. Clear numerical data—diameter, tolerance and length—enables uncomplicated documentation in quality protocols and simple cross‑referencing with inspection plans. Protective packaging on delivery preserves the surface finish and dimensional fidelity until first use. Contact Metav Werkzeuge to secure the Metav IndustryLine M323.786 for reliable end‑dimension checks or ask our consultants for assistance in matching inspection equipment to production needs; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.786 GTIN: 4061905062063 Material: Special steel Nominal diameter: 7.86 mm Tolerance: ±0.001 mm Length: 50 mm Facts Weight: 0.023 kg Single unit delivery Category: Gauge pin / Test pin Special features Workshop version construction Delivered in a protective plastic or wooden case Intended for end‑dimension checks SKU: M323.786 FAQ What is the nominal diameter of the pin? The nominal diameter of the Metav IndustryLine gauge pin M323.786 is 7.86 mm. What tolerance does this test pin provide? The M323.786 gauge pin is specified with a tolerance of ±0.001 mm for high‑precision end checks. How long is the pin and what does that mean for use? The pin length is 50 mm, which provides practical reach for fixture and bore verification while remaining easy to handle in workshop inspections. What material is the pin made from? The M323.786 is manufactured from special steel designed for wear resistance and stable dimensional performance. Is the pin suitable for final dimensional inspection? Yes; the combination of 7.86 mm nominal diameter, ±0.001 mm tolerance and robust construction makes the M323.786 suitable for end‑dimension verification and routine pass/fail checks. How is the pin delivered to protect measurement accuracy? The M323.786 is supplied as a single test pin and is delivered in protective packaging to preserve the surface and dimensions until use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.87mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm accuracy, robust special steel construction and a compact 50 mm length for reliable end-dimension checks; order the pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.787 gauge pin — 7.87 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.787 gauge pin is a single inspection pin designed for precise end‑dimension verification and gauging tasks in workshop and inspection environments. Workshop version for robust daily use Tolerance ±0.001 mm for sub-micron control Solid special-steel construction Precision where repeatability matters Engineered for tight tolerance control, this gauge pin delivers a certified dimensional accuracy of ±0.001 mm, making it suitable for high‑precision end‑measure checks and fine inspection tasks. The nominal diameter of 7.87 mm and the compact 50 mm length combine to offer a stable reference for plug and bore gauging. By using a single, hardened measuring surface the design minimises elastic deformation during insertion, which improves reproducibility and lowers the risk of erroneous readings in serial inspection routines. Durable design for everyday workshop use Built as a workshop version, the pin uses special steel selected for wear resistance and dimensional stability under repeated handling. The robust material choice supports longevity in production environments and reduces the need for frequent replacement. Delivered individually in a transport case, the component is protected during storage and transit, which maintains the integrity of the measuring face and saves on rework. The compact format also supports efficient handling in assembly benches and inspection stations where space is at a premium. Simple integration and traceable use The single‑piece pin format simplifies set‑up for go/no‑go checks and fixture calibration, while the clear SKU M323.787 helps with stock control and traceability in quality records. Designed for end‑measure applications, the gauge pin integrates easily into pneumatic or manual inspection routines and pairs well with common clamping and fixture systems. For customers seeking guidance on suitable workflows or compatibility with existing tooling, Metav IndustryLine can provide technical clarification and product matching to support operational decisions. Contact Metav Werkzeuge for tailored technical advice and to secure the M323.787 gauge pin for your inspection tasks — Metav Werkzeuge GmbH, Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.787 GTIN: 4061905062070 Manufacturer: Metav IndustryLine Facts Diameter: 7.87 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Workshop version for daily use Material: special steel Supplied individually Delivered in a transport case Application: end-dimension checks FAQ How accurate is the M323.787 gauge pin? The M323.787 gauge pin is specified with a tolerance of ±0.001 mm, providing sub‑micron accuracy suitable for precise end‑measure inspections. What material is used for this inspection pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop environments. Is the pin supplied ready for immediate use? The gauge pin is supplied as a single unit in a transport case to protect the measuring face; calibration details are available where specified in the product data. What is the intended application for this pin? Designed for end‑dimension and plug/bore checks, the pin is intended for workshop and inspection tasks requiring precise reference diameters. How should the M323.787 be stored to keep accuracy? Store the pin in its supplied transport case and avoid contact with abrasive surfaces; this preserves the measuring face and helps maintain the specified tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.88mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Combine ±0.001 mm tolerance with a 7.88 mm nominal diameter and a 50 mm length to ensure dependable fit checks and repeatable verification in production. Benefit from a workshop‑grade solid construction and protected transport packaging; order the gauge pin directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin M323.788 — workshop‑grade test pin, 7.88 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.788 is a workshop‑grade precision test pin for end‑measurement and verification tasks in inspection fixtures, jigs and assembly checks. Workshop‑grade precision test pin Nominal diameter 7.88 mm Tolerance ±0.001 mm Supplied in protective transport case High precision that reduces inspection uncertainty A tolerance of ±0.001 mm positions this gauge pin in the category of high‑precision control tools for routine inspection tasks. The very tight tolerance translates into reliable go/no‑go assessments and repeatable reference points during assembly checks, reducing the risk of scrap and rework. Where dimensional conformity directly affects downstream processing, the use of a predefined reference pin ensures faster decisions on part acceptance and contributes to overall process stability. Robust, workshop‑suitable materials and compact dimensions Constructed from special steel and finished for immediate use in production environments, the component combines toughness with dimensional stability. With a nominal diameter of 7.88 mm and a length of 50 mm, the design balances accessibility in fixtures with sufficient contact area for accurate seating. The compact mass supports simple handling in repetitive checks while resisting the wear patterns typical of workshop operations, thereby extending service intervals and maintaining calibration intervals for longer. Practical handling and straightforward integration into inspection workflows Supplied as a single‑piece test pin, the item is intended for end‑measurement and verification duties in jigs, gauges and checking fixtures. The protective transport case keeps the surface condition intact during storage and transit, preserving the published tolerance. For manufacturers and toolmakers who require quick verification steps at the bench or in the fixture, this gauge pin provides an efficient, low‑complexity solution that dovetails with standard inspection routines without added setup time. Contact Metav Werkzeuge in Emmerich for application guidance and to arrange prompt supply of the M323.788 gauge pin — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.788 GTIN: 4061905062087 Weight: 0.023 kg Brand: Metav IndustryLine Data Diameter: 7.88 mm Length: 50 mm Tolerance: ±0.001 mm Special features Material: special steel Workshop execution Supplied in protective transport case Intended use: end‑measurement and inspection tasks FAQ What is the specified tolerance of the M323.788 gauge pin? The M323.788 gauge pin is manufactured to a tolerance of ±0.001 mm, making it suitable for high‑precision inspection and fit checks. Which material is used for this test pin? This test pin is made from special steel and finished for robust, workshop‑grade use. For which inspection tasks is this pin intended? The gauge pin is designed for end‑measurement, verification in inspection fixtures and jigs, and quick fit assessments during assembly. How is the product packaged for transport? The product is supplied in a protective transport case to preserve the surface condition and maintain measurement integrity during handling. Can this pin be used for repeated go/no‑go seating checks? Yes — the nominal diameter of 7.88 mm combined with the ±0.001 mm tolerance makes it suitable for repeated seating and fit checks where dimensional consistency is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.89mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial‑grade precision (±0.001 mm), robust special‑steel construction and compact 50 mm length for reliable end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.789 — precision inspection pin, Ø 7.89 mm, ±0.001 mm (Metav IndustryLine) Test pin M323.789 serves as a single, high‑precision inspection pin for end‑measure verification and reference gauging in workshop and inspection environments. Precision tolerance ±0.001 mm Diameter Ø 7.89 mm for end‑measure fits 50 mm hardened special‑steel shaft Workshop version with transport case High precision for reference measurements that must be reproducible The inspection pin delivers a tight tolerance of ±0.001 mm, making it suitable where repeatable end‑measure checks are required. As a compact, single‑piece gauge, it offers a defined contact geometry that reduces measurement ambiguity when used as a reference or plug for small bores and locating features. The combination of Ø 7.89 mm diameter and a 50 mm shaft length gives a stable probe point while keeping handling and fixture integration straightforward. This level of precision supports consistent pass/fail decisions during quality control. Robust workshop design for everyday handling and fixture use Made from special steel and finished for workshop duty, the probe resists wear during frequent insertion and extraction from jigs or bores. Its light overall mass (approx. 23 g) reduces the risk of disturbing delicate set‑ups, while the hardened shaft maintains roundness and repeatability over many cycles. Delivered in a transport case for protected storage and transit, the article is configured for reliable use at the bench or in fixture stacks, shortening downtime and simplifying handling during routine inspection rounds. Practical applications and procurement confidence Ideal for end‑measure and reference tasks, the gauge pin integrates with plug‑gauge checks, alignment fixtures and depth or step references in assembly operations. The compact geometry suits confined spaces where a defined contact tip is required, while the industrial finish eases cleaning and maintenance. Backed by Metav’s quality approach and broad product range, the component supports standardisation across workshop tool cabinets and inspection benches, helping to reduce supplier overhead and improve part‑to‑part comparability. Contact Metav Werkzeuge in Emmerich for procurement and technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 — our team will advise on suitable gauges and delivery options Technical data Article number: M323.789 GTIN: 4061905062094 Brand: Metav IndustryLine Label: Test pin, single, 7.89 mm, ±0.001 mm, length 50 mm Measurements Diameter: 7.89 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Material: special steel Workshop design Supplied in transport case Single inspection/test pin Intended for end‑measure and reference checks FAQ What accuracy can be expected from this inspection pin? The test pin M323.789 provides a declared accuracy of ±0.001 mm, suitable for high‑precision reference and end‑measure checks in inspection routines. Is the pin suitable for frequent use in jigs and fixtures? Yes, the special‑steel construction and hardened shaft of this Metav IndustryLine test pin are designed for repeated insertion and fixture handling without rapid wear. Can the pin be used to check bore diameters directly? The Ø 7.89 mm diameter and defined contact geometry make the pin appropriate as a reference for small‑bore verification and alignment tasks. What form of delivery is provided for safe storage and transport? The item is supplied in a protective transport case to prevent damage during storage and transit and to keep the gauge ready for immediate use. Which applications suit this type of inspection pin? Typical uses include plug‑gauge references, end‑measure checks, alignment in assemblies and positional referencing in fixture set‑ups; the compact 50 mm length supports confined space work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.8mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
High‑precision end‑dimension verification is delivered via the combination of an ultra‑fine ±0.001 mm tolerance and a stable 50 mm length, ensuring reproducible gauging results for routine quality checks. Order the gauge directly via Metav Werkzeuge or consult our specialists for specification matching. Test Pin M323.780 – Workshop test pin, 7.80 mm diameter, ±0.001 mm (Metav IndustryLine) A Test Pin M323.780 engineered for precise end‑dimension verification and repeatable gauging tasks in metrology and workshop quality control Ultra‑fine tolerance ±0.001 mm Diameter 7.80 mm for end‑dimension checks Durable special‑steel workshop design Delivered in protective transport box Reliable accuracy for routine quality control The test pin offers an exceptional tolerance of ±0.001 mm, which translates into measurable improvements in process reliability and fewer false rejects during batch inspection. This level of precision is typically required for final dimension checks where even micrometres matter; the fine tolerance reduces uncertainty in pass/fail decisions and supports tight quality specifications. The gauge pin functions as a stable reference for go/no‑go checks and comparative measurements, making it suitable for repeatable in‑line or bench inspections. Robust workshop design for frequent handling Manufactured in special steel and presented in a workshop‑grade version, the pin withstands repeated use in industrial environments while preserving dimensional integrity. The compact 50 mm length and low mass optimise handling and reduce inertia during quick checks; the listed weight of 0.023 kg aids ease of placement in fixtures and holders. Delivery in a protective transport box guards the working surfaces against nicks and contamination during storage and transit, helping to maintain the pin’s repeatability over time. Practical integration and time‑saving benefits As a single‑piece test pin, this item simplifies inventory and fixture layouts where specific end‑dimension masters are required. The 7.80 mm diameter is immediately usable as a reference for end‑dimension verification, alignment of small bores or as a datum in assembly checks. Traceability information such as GTIN and SKU supports record keeping for quality systems and enables straightforward replacement planning. The compact form factor also minimises set‑up time, so routine checks can be executed quickly without complex fixturing. Discuss specification requirements with Metav Werkzeuge in Emmerich or request further technical documentation via info@metav-werkzeuge.com Technical data Article number: M323.780 GTIN: 4061905060939 Category: Messstifte Label: Test pin, single, 7.80 mm, ±0.001 mm, length 50 mm Numbers Diameter: 7.80 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg Special features Material: special steel Workshop version (robust design) Delivered in protective transport box for shipment Single‑piece supply for end‑dimension verification FAQ What tolerance does the test pin provide? The Test Pin M323.780 (Metav IndustryLine test pin) is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks and tight quality criteria. Which material is used for this gauge pin? The pin is made from special steel; this material choice offers a balance of hardness and resistance to wear appropriate for workshop gauging applications. Is the pin supplied individually or as a set? The product is supplied as a single test pin; packaging includes a protective transport box to prevent damage during storage and transport. For which tasks is this pin best suited? Typical uses include end‑dimension verification, small bore alignment, datum establishment in fixtures, and quick go/no‑go checks where a stable, repeatable reference is required. How should the pin be stored to maintain accuracy? Store the pin in its protective box, keep it free from coolant and corrosion, and avoid impacts or surface contamination that could affect dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.91mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a precise 7.91 mm diameter and robust 50 mm length for reproducible end measurements; order the M323.791 directly via Metav Werkzeuge or consult the team for application advice. M323.791 gauge pin — precision 7.91 mm, tolerance ±0.001 mm (Metav IndustryLine) M323.791 gauge pin is a single, high-precision gauging element designed for use in workshop inspection and end-measure verifications, ideal where tight diametral tolerances must be maintained. High-precision 7.91 mm diameter ±0.001 mm Robust 50 mm length in special steel Supplied in transport case for safe delivery Accuracy that secures production tolerances The M323.791 delivers ±0.001 mm nominal tolerance on a 7.91 mm diameter, a level of precision that supports critical go/no-go checks and fine inspection tasks. Such a narrow tolerance reduces uncertainty in pass/fail decisions and improves repeatability across shift changes or between operators. The specification positions this item among high-precision gauging tools, making it suitable as a reference pin for end-measure assessments in component inspection, where dimensional conformity directly affects assembly quality and functional performance. Durable construction for regular workshop use Built in a workshop design and manufactured from special steel, this gauging pin combines hardness with dimensional stability over routine handling. The 50 mm length gives a practical contact surface while maintaining rigidity; combined with a low mass of 0.024 kg, it is easy to handle and less prone to deflection during placement. Supplied individually and protected in a transport case, the component is prepared for storage and safe transit between measuring stations without exposing the measuring face to damage. Practical integration into quality workflows The pin is supplied with a clear catalogue identity (SKU M323.791) and machine-readable GTIN, aiding inventory control and traceability within inspection plans. As a precision plug gauge, it suits end-measure tasks in dimensional inspection routines and can be integrated into existing fixtures or manual gauges. The design reduces the need for repeated adjustments and supports faster decision-making in quality control, helping to maintain process throughput without compromising measurement certainty. For an assessment of suitability in specific inspection setups or to arrange procurement of the M323.791 gauge pin from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and delivery options. Technical data Article number: M323.791 GTIN: 4061905062117 Manufacturer: Metav IndustryLine Category: Messstifte Facts Diameter: 7.91 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Measurement range max: 7.91 mm Special features Material: special steel Workshop execution Supplied individually Delivered in transport case for transport FAQ What level of accuracy does this gauging pin offer? The M323.791 gauge pin is specified to ±0.001 mm, making it suitable for high-precision end-measure checks within fine-tolerance inspection workflows. Which materials is the pin suitable for inspecting? As a gauge pin, the M323.791 is intended to verify dimensions on finished parts regardless of substrate; the special steel construction ensures long-term dimensional stability when used as a reference element in quality control. How is the component delivered and protected? The pin is supplied individually and comes protected in a transport case to prevent damage to the measuring faces during transit and storage. Can the M323.791 be used in fixture-based inspection systems? Yes, the geometry and rigidity of the M323.791 suit integration into manual or fixture-based inspection setups where a reliable plug gauge is required for end-measure verification. Is the product documented for inventory and traceability? The M323.791 is provided with a GTIN (4061905062117) and clear article identification to support stock management and traceability within inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.92mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
High repeatability combined with a tight tolerance of ±0.001 mm reduces inspection variability; the 7.92 mm diameter and 50 mm length provide a stable reference for end‑measure checks. Order the test pin directly via Metav Werkzeuge or consult our specialists for application guidance. Test pin M323.792 — single precision gauge pin, Ø 7.92 mm, ±0.001 mm (Metav IndustryLine) A Test pin M323.792 designed for high‑precision end‑measure verification and go/no‑go assessment in workshop metrology. Workshop-grade special steel construction Diameter accuracy ±0.001 mm for tight fits 50 mm length for reliable end‑measure checks Reduce rejects with micron-level repeatability The gauge pin delivers sub-micron stability, with a specified tolerance of ±0.001 mm, which translates to reproducible pass/fail decisions during final inspection. This level of precision minimises sorting and rework, as a consistent reference diameter helps to quickly verify mating bores and seating fits. The narrow tolerance also supports high-quality assembly processes, where small deviations can lead to expensive downstream faults. Durable design for everyday workshop use Built in a workshop grade finish from special steel, the pin resists accelerated wear while retaining dimensional integrity over many cycles. Surface quality and material selection ensure low fretting and predictable contact behaviour when used with hardened or standard components. The robust construction reduces the need for frequent replacement, supporting steady inspection throughput and lower total cost of ownership in production environments. Easy integration into inspection workflows The single gauge pin format is compatible with bench blocks, setting fixtures and hand‑held checks, providing a simple physical reference for calipers or micrometres. Marked with its SKU and GTIN for traceable inventory handling, the pin fits seamlessly into documented quality routines and batch checks. Traceability to a unique article number simplifies record keeping and supports audits where a clear link between tool and measurement outcome is required. Typical applications and handling notes Ideal for final dimensional checks, plug verification and end‑measure controls in mechanical workshops and small series production. The 50 mm length provides sufficient engagement for stable seating while remaining easy to handle. Where repeatable contact and a defined datum are needed, the gauge pin performs reliably as a compact inspection tool that complements existing metrology equipment without complex setup. Request technical advice or place an order with Metav Werkzeuge for swift supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.792 GTIN: 4061905062124 Manufacturer SKU: M323.792 Dimensions & tolerances Diameter: 7.92 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Features & materials Material: Special steel Single test pin, workshop execution Eclass: 21170231 Accuracy specification: ±0.001 FAQ What tolerance does the gauge pin provide? The M323.792 gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for very tight fit checks and high‑precision end‑measure verifications. Which materials is the pin intended for? Made from special steel, the pin is intended as a durable inspection reference for general workshop applications and is compatible with typical machined metals used in assemblies. How should the gauge pin be used in an inspection routine? Use the pin as a physical reference for plug checks, go/no‑go seating tests or to verify bore diameters with complementary fixtures; the compact format supports rapid routine inspection. Is the article traceable in inventory systems? Yes, the product is supplied with a unique article number (M323.792) and GTIN (4061905062124) to support inventory control and audit documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.93mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Taking advantage of high-precision tolerance (±0.001 mm) together with a 7.93 mm diameter and 50 mm length, this workshop-grade gauge pin ensures repeatable end-measure checks and straightforward handling; supplied in a protective case and made from special steel, it supports reliable on‑bench inspection and fixture setup. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if additional data is required. Gauge Pin M323.793 — 7.93 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge Pin M323.793 is a single, workshop-grade measuring pin for precise end‑measure checks and bore verification in production and inspection environments High-precision tolerance ±0.001 mm Diameter 7.93 mm, length 50 mm Workshop version with protective case Precision where reproducibility reduces rework The workshop-grade pin delivers a tolerance of ±0.001 mm, providing the sort of repeatability that reduces inspection uncertainty and minimises rework. Manufactured from special steel, the cylindrical form and defined length guarantee stable contact geometry for bore and end‑measure controls. With a compact mass of 0.024 kg, the pin is easy to handle during rapid check routines without compromising stability. These characteristics make the component particularly suitable for dimensional checks in small‑batch production or toolroom verification, where small deviations can quickly affect assembly quality. Practical benefits for workshop inspection and set-up Designed as a single, robust measuring element, the pin supports quick go/no‑go type checks and precise fixture alignment. The clearly defined 7.93 mm diameter and 50 mm overall length provide a consistent reference for setting gauges, aligning components and verifying end measures. Supplied in a protective case, the item is kept safe during transport and storage, preserving the finished surface and dimensional integrity. The compact format and straightforward geometry make integration into existing inspection routines uncomplicated and time‑efficient. Application focus: where this tool adds value Used for bore verification, plug checks and end‑measure comparisons, this gauge pin is ideal for workshops and inspection benches that require a reliable physical reference. The combination of a tight tolerance and workshop robustness supports faster quality decisions and fewer measurement-related stoppages. In production chains where rapid confirmation of critical diameters is needed, the pin functions as a dependable mechanical standard for both manual checks and integration into fixture-based inspection workflows. For dependable, workshop-ready bore and end‑measure control choose the Metav IndustryLine gauge pin M323.793 — contact Metav Werkzeuge in Emmerich for stock status and tailored delivery options Technical data Article number: M323.793 GTIN: 4061905062698 Brand: Metav IndustryLine Core measurements Diameter: 7.93 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Special features Material: special steel Workshop execution Supplied in protective case for transport and storage Suitable for end‑measure checks and bore verification FAQ What degree of accuracy does the pin offer? The gauge pin M323.793 provides a tolerance of ±0.001 mm, making it suitable for fine end‑measure and bore checks in workshop and inspection settings. Can this pin be used to set up fixtures and gauges? Yes, the 7.93 mm diameter and 50 mm length make the pin appropriate as a reference for fixture alignment and gauge setup in production and toolroom environments. What material is the pin made from and why does that matter? The pin is manufactured from special steel, chosen for dimensional stability and resistance to wear, which helps maintain measurement integrity over repeated use. Is the pin protected in transit? The item is supplied in a protective case, designed to preserve the surface finish and prevent transport damage so the pin arrives ready for immediate use. Is this product intended for workshop use or laboratory calibration? Designed as a workshop version, the pin is optimised for robust, routine inspection and setup tasks; it serves as a reliable mechanical reference rather than a primary laboratory standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.94mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
A precision reference for inspection tasks: the gauge pin with 7.94 mm diameter and ±0.001 mm tolerance delivers repeatable measurements and stable seating for go/no‑go checks; the 50 mm length and hardened special steel construction ensure low deflection and handling convenience, and the pin is supplied in a protective transport case. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.794 — 7.94 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.794 designed for high‑precision reference and inspection in metrology and workshop quality control 7.94 mm diameter, ±0.001 mm tolerance Hardened special steel for stability 50 mm length for secure handling Supplied in a protective transport case Reliable reference for repeatable inspections A precise gauge pin is the simplest way to produce a reliable reference when verifying bores, pins and end dimensions. With a nominal 7.94 mm diameter and a declared ±0.001 mm tolerance, this test pin provides repeatability suitable for fine inspection tasks and assembly checks. The tight tolerance reduces uncertainty in go/no‑go procedures and supports consistent decision making in quality control workflows, making it appropriate for workshop metrology and inspection benches where dimensional certainty is required. Durable construction that minimises measurement uncertainty Constructed from special steel and finished for a hard wearing surface, the pin’s 50 mm length offers a comfortable grip and stable seating for contact gauges and checking fixtures. The compact mass (approx. 0.024 kg) and robust material help to keep deflection low during manual handling, while the workshop version design emphasises practical resilience under regular use. Delivered in a protective case for transport, the item is protected against damage in transit and storage, preserving the integrity of the measuring surface. Easy to integrate into inspection routines and traceability The gauge pin labelled M323.794 is supplied with a clear product identity for simplified inventory and traceability; the item can be referenced alongside inspection procedures and measurement logs to document conformity. The compact design suits quick interchange between fixtures, and the stable diameter assists in aligning mating parts or verifying end masses. For customers seeking a straightforward, robust reference pin for production or maintenance checks, this solution from Metav IndustryLine supports efficient, repeatable measurement routines without complex setup. Contact Metav Werkzeuge for application guidance or ordering of the M323.794 gauge pin — Metav Werkzeuge’s specialists will advise on suitability and delivery from Emmerich to your workshop Technical data Article number: M323.794 Label: Prüfstift, einzeln, 7,94mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 7.94 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg GTIN: 4061905062704 Special features Material: Special steel Workshop version Supplied in protective transport case SKU: M323.794 FAQ What tolerance does the gauge pin offer? The gauge pin M323.794 is specified with a tolerance of ±0.001 mm, making it suitable for fine inspection and reference measurements in workshop metrology. What material and length does this test pin have? The pin is made from special steel and has a nominal length of 50 mm, providing a robust measuring element with convenient handling. Is the gauge pin supplied with a protective case? Yes, the M323.794 is supplied in a protective transport case to safeguard the measuring surface during transit and storage. Can this gauge pin be used for go/no‑go checks and fixture alignment? The M323.794 gauge pin is intended as a reference for go/no‑go checks and alignment tasks where a stable, precise diameter is required; the tight tolerance supports repeatable verification. Is a calibration certificate included with this pin? No specific calibration certificate is indicated for this gauge pin; the product data does not list an ISO 17025 calibration certificate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.95mm Gauge Pin Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
The combination of high repeatability, a ±0.001 mm tolerance and a compact 50 mm length makes this test pin a reliable choice for end‑size inspection and plug‑fit verification; order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. M323.795 Test pin (gauge pin) — 7.95 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.795 Test pin is a single, workshop‑grade gauge pin designed for precise end‑size control and verification tasks in production and inspection environments Certified accuracy ±0.001 mm Diameter 7.95 mm for end‑size checks 50 mm length for secure seating Special steel workshop construction Reliability where tolerances matter This compact gauge pin delivers consistent metrology performance for critical end‑dimension checks. With a nominal diameter of 7.95 mm and a declaration of ±0.001 mm accuracy, the component supports high‑precision verification tasks that reduce scrap and rework. The small mass and robust geometry ensure stable seating in inspection fixtures; combined with a 50 mm shank length, the pin offers sufficient engagement for repeatable measurements. The precision specification is suitable for workshop and production environments where tight dimensional control is required. Practical use and measurable benefits Designed as a single test pin for direct use in gauges, bores and fixtures, this item simplifies inspection workflows by providing an immediately usable reference for end‑size control. The special steel construction provides dimensional stability during routine handling and resists minor surface wear under normal workshop conditions. Weight and form factor permit quick insertion and removal in checking sequences, accelerating throughput without sacrificing measurement integrity. Selection as a fixed reference in a gauging set reduces setup time and supports consistent quality decisions on the shop floor. Traceability, labelling and workshop suitability The gauge pin is supplied individually with a clear article identifier and GTIN for inventory and traceability purposes; the compact design supports storage in tool trays and calibration cabinets. The workshop‑grade build indicates a balance between ruggedness and precision, making it appropriate for regular inspection tasks. The product is identified as M323.795 for catalogue and stock control and is compatible with standard gauging practices used in end‑dimension verification and plug‑fit checks. For precise end‑size control choose Metav IndustryLine’s M323.795 test pin — contact Metav Werkzeuge for tailored advice and order processing at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M323.795 GTIN: 4061905062711 Weight: 0.024 kg Material: Special steel Length: 50 mm Diameter (nominal): 7.95 mm Tolerance: ±0.001 mm Facts Nominal diameter: 7.95 mm Length: 50 mm Mass: 0.024 kg Accuracy class: ±0.001 mm Special features Workshop execution Single test pin delivery Intended for end‑size checks and plug‑fit verification Compact form for fixture use FAQ Is the M323.795 suitable for inline inspection stations? The M323.795 test pin is suitable for inline inspection where a fixed reference gauge is required; its ±0.001 mm accuracy supports repeatable end‑size checks in production flows. What material is used and how does it affect wear? Manufactured from special steel, the pin balances hardness and toughness for workshop use; surface wear is minimised under normal handling and typical gauging cycles. Can this pin be used for plug‑fit verification of mating parts? Yes, the gauge pin’s 7.95 mm nominal diameter and 50 mm length make it appropriate for plug‑fit checks and verification of mating bore dimensions. How is the item identified for inventory and traceability? The product is listed as M323.795 and carries the GTIN 4061905062711 for catalogue management and traceability. What inspection tasks is this pin intended for? The pin is designed primarily for end‑size control, bore verification and use as a fixed reference in gauging setups where tight tolerances are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.96mm Gauge Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Benefit from workshop-ready precision with a ±0.001 mm tolerance, robust special steel construction and a compact 50 mm length for repeatable end‑measurements; order the gauge pin directly via Metav Werkzeuge or consult the Metav advisors for application advice. Gauge pin M323.796 — precision test pin, Ø 7.96 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.796 is a workshop‑grade precision test pin for end‑measurements and verification tasks, supplied ready for secure transport. Tolerance ±0.001 mm Diameter 7.96 mm for end measurements 50 mm length in special steel Workshop-grade and transport box included Precision that speeds up inspection and reduces rework The M323.796 is specified to ±0.001 mm, a tolerance that places it among high‑precision pins for repeatable plug and end‑measurements. Such fine tolerance means deviations are minimised during functional checks and go/no‑go trials, improving the reliability of batch inspections. By using a measuring reference with this accuracy the number of ambiguous readings is reduced, which in turn decreases the risk of costly rework and production hold‑ups. The clear numeric tolerance also aids documentation and quality traceability in manufacturing records. Built for workshop handling and resilient use Manufactured in a workshop‑grade design from special steel, this test pin balances stiffness and handling comfort in short‑length applications. The 50 mm length and a compact diameter of 7.96 mm make it well suited for end‑measurements, fixture setting and reference checks where accessibility and stability matter. The low mass supports easy positioning while the robust material improves wear resistance in regular use. Supplied in a dedicated transport box, the pin remains protected during storage and transfer between workstations, supporting longevity and consistent measurement results. Ready for metrology workflows and traceable documentation As a precision test pin intended for inspection routines, the component integrates into standard verification setups, gauging fixtures and fixture calibration operations. Traceability is supported via the product identifiers for inventory and records. For applications requiring formal calibration evidence, Metav can advise on suitable calibration paths and documentation to match internal quality systems. Metrological compatibility and a clear nominal tolerance make the pin a practical choice for quality control tasks in machining and small‑parts assembly. Contact Metav Werkzeuge today to discuss the M323.796 gauge pin from Metav IndustryLine and ensure the part fits the intended inspection process and documentation requirements Technical data Article number: M323.796 GTIN: 4061905062728 Label: Prüfstift, einzeln, 7,96mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.96 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.024 kg Special features Material: Special steel Workshop execution Supplied in transport box Category: Messstifte FAQ What tolerance does the test pin offer? The M323.796 test pin is specified at ±0.001 mm, suitable for high‑precision end‑measurements and repeatable inspection tasks. What is the intended use of this gauge pin? The pin serves as a precision reference for end‑measurements, fixture setting and go/no‑go style checks in workshop and inspection environments. Is the pin supplied ready for transport and storage? Yes, the gauge pin is supplied in a transport box to keep the part protected during transfer and storage. How can the product be identified in stock and documentation? Identification is possible via the article number M323.796 and GTIN 4061905062728 for inventory and traceability purposes. Can this pin be used in certified laboratory calibration? The M323.796 is a high‑precision workshop test pin; for use as a certified reference in an accredited laboratory, consult Metav regarding calibration options and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.97mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance, robust special steel construction and compact 50 mm length for reliable in‑fixture measurement. Benefit from a workshop‑grade gauge pin that supports precise end‑dimension checks and consistent repeatability — order the product directly via Metav Werkzeuge or consult the technical team for application advice. Test pin M323.797 — Gauge pin (7.97 mm) with ±0.001 mm accuracy Test pin M323.797 is a precision gauge pin designed for end‑dimension verification and fixture alignment in inspection and jigs. Workshop version for robust shop use Diameter 7.97 mm with ±0.001 mm accuracy Length 50 mm for fixture and gage use Precision where tolerances decide the outcome The gauge pin offers a diameter of 7.97 mm with a guaranteed ±0.001 mm deviation, making it suitable for high‑precision measurement tasks and fine tolerance checks. Its compact 50 mm length and low mass ensure minimal influence on delicate fixtures while the special steel construction maintains dimensional stability under repeated handling. This combination reduces rework and improves process reliability, particularly where parts are inspected against tight end‑dimension criteria. Robust design for everyday workshop use Built as a workshop version, the pin withstands frequent insertion and removal in gauges and alignment tools without sacrificing accuracy. The hardened steel body provides wear resistance and consistent contact geometry, which translates into repeatable measurements over many cycles. Where repeatability is critical, the stable material properties and precise machining minimise measurement drift and support predictable quality control outcomes. Easy integration into inspection routines As a standard gauge pin from Metav IndustryLine, this component integrates seamlessly into jigs, plug gauges and test assemblies. The compact form factor and exact diameter enable quick substitution in inspection fixtures and permit straightforward comparative checks during batch sampling. Traceable identification (SKU M323.797, GTIN 4061905062735) supports inventory control and documentation within metrology procedures, contributing to clear audit trails and consistent part verification. Contact Metav Werkzeuge to match this Metav IndustryLine gauge pin to specific fixtures or measurement routines and secure the right specification for production control. Technical Data Article number: M323.797 GTIN: 4061905062735 Brand: Metav IndustryLine Facts Diameter: 7.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.024 kg Special features Material: Special steel Version: Workshop execution Accuracy class: ±0.001 mm Category: Gauge pin / test pin eCl@ss: 21170231 FAQ What is the declared tolerance of this gauge pin? The declared tolerance of the Test pin M323.797 is ±0.001 mm, specified for precise end‑dimension and fixture checks. Which materials is the pin suitable for when used as a reference in gauges? The pin is made from special steel and is intended as a dimensional reference in gauges rather than for direct machining of workpiece materials. Can this pin be used in plug gauge kits and inspection jigs? Yes, the Metav IndustryLine gauge pin (SKU M323.797) is designed for integration into plug gauges, jigs and test assemblies for repeatable verification. How does the short length affect measurement stability? The 50 mm length minimises lever effects in compact fixtures and reduces handling influence, improving repeatability in end‑dimension checks. Is traceability provided for this component? The product identification (M323.797, GTIN 4061905062735) supports traceability within inspection documentation and inventory systems Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com