Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
7.27mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Precise end‑measurement capability is delivered by the single test pin through its 7.27 mm diameter, ±0.001 mm tolerance and 50 mm length, ensuring stable contact and repeatable readings. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test Pin M323.727 — single workshop test pin, Ø 7.27 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A Test Pin M323.727 designed for precise end‑measurements and routine gauge applications in workshop and quality control environments High-precision ±0.001 mm tolerance Diameter 7.27 mm for end measurements 50 mm length for stable contact Workshop version with robust finish Accuracy that stabilises inspection results The core advantage of this measuring pin is its ±0.001 mm specification, which corresponds to a one‑micrometre resolution and sets a clear expectation for high repeatability in comparative checks. Built for end‑measurement tasks, the pin’s nominal 7.27 mm diameter and 50 mm length reduce angular play at the contact point and help maintain consistent seating in holders and gauges. For production contexts where small deviations cascade into scrap or rework, this level of tolerance supports reliable go/no‑go decisions and shortens inspection loops by reducing measurement noise. Robust construction for everyday workshop use Manufactured from special steel, the component is offered in a workshop version that balances wear resistance with manageable handling. The low mass (approx. 0.02 kg) aids quick manual positioning and reduces inertia when used in semi‑automatic test fixtures. The material choice and finish extend service intervals under normal workshop stress while preserving datum integrity during repeated contacts. This design approach minimises unplanned downtime and supports predictable maintenance cycles for gauge sets. Practical integration into quality workflows As a single test pin the item is readily integrated into bench fixtures, plug gauges and comparative measurement rigs; its form factor suits both handheld checks and fixture‑mounted routines. Traceable identification (SKU M323.727) simplifies stock keeping and documentation in quality records. When combined with appropriate fixture design, the pin helps deliver reproducible reference points for alignment tasks and end‑face checks, improving process control without requiring complex measuring equipment. Reliable supplier backing and usability benefits Sourcing through a specialist supplier brings practical advantages: rapid availability from a central European quality hub and clear product data for procurement and planning. The compact geometry and workshop‑oriented specification make the component a pragmatic choice for toolrooms, maintenance departments and small series inspection—where accuracy, durability and ease of handling must coexist. Contact Metav Werkzeuge for tailored advice on using the M323.727 test pin in fixture design or inspection plans and benefit from expert guidance direct from Emmerich. Technical Data Article number: M323.727 GTIN: 4061905059223 Manufacturer: Metav IndustryLine Facts Diameter: 7.27 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.02 kg Special features Workshop version Material: special steel Single test pin for end measurements Category: Messstifte FAQ What level of accuracy can be expected from this test pin? The M323.727 test pin is specified to ±0.001 mm, providing micrometre‑level repeatability suitable for fine inspection and comparative gauging tasks. Is the pin suitable for mounting in gauge fixtures? Yes. The 50 mm length and 7.27 mm diameter of the test pin make it appropriate for fixture mounting and bench gauge integration in workshop environments. Which material is used and how does it affect wear resistance? The pin is made from special steel, selected to offer a balance of surface hardness and resistance to routine workshop wear while maintaining dimensional stability. Can this pin be used for both handheld checks and automated fixtures? The low mass and robust finish allow use in handheld comparative checks as well as in simple automated or semi‑automatic fixtures where stable contact and repeatability are required. How is the product identified for ordering and traceability? Order and stock references use the SKU M323.727 and GTIN 4061905059223, which support procurement, inventory control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.28mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise diameter control and workshop-ready robustness for reliable end‑measurement checks; the combination of 7.28 mm nominal diameter, ±0.001 mm tolerance and a 50 mm length supports reproducible results in quality control — order directly via Metav Werkzeuge or consult our specialists for application advice. M323.728 gauge pin (7.28 mm, ±0.001 mm) — Metav IndustryLine The M323.728 gauge pin is a single inspection pin designed for high-precision end‑measurements and go/no‑go checks in workshop and production metrology. Diameter 7.28 mm with ±0.001 mm accuracy Length 50 mm workshop execution Made from special steel for durability Supplied in a protective transport case Consistent measurement precision that reduces rework The M323.728 is engineered for repeatable dimensional checks where tight tolerances matter. With a nominal diameter of 7.28 mm and an accuracy of ±0.001 mm, the pin provides a reliable reference for plug checks, fixture validation and assembly controls. The small form factor and stiff geometry ensure minimal elastic deformation during handling; this stability translates into fewer measurement variations and therefore less rework and scrap in downstream processes. Bold, simple inspection calls or routine spot checks become decisive quality gates with this reference element. Built for the workshop: robustness meets handling comfort Designed as a workshop execution part, the gauge pin combines pragmatic durability with straightforward handling. The special steel construction offers resistance against wear during repeated use while preserving the critical running surface. Supplied in a protective transport case, the pin remains clean and protected between uses, which lowers the risk of surface damage that would otherwise affect measurement integrity. The sensible length of 50 mm provides a comfortable grip and controlled insertion depth for manual inspection tasks on benches and fixtures. Practical applications and compatibility in production environments This inspection pin suits a wide range of metrology tasks such as end‑measurements, reference checks in jigs and fixtures, and validation of bore concentricity where a precise cylindrical master is required. As a single, traceable reference element with a documented nominal size and tight tolerance, it integrates easily into manual inspection routines and complements more complex gauging assemblies. Its compact design makes it especially useful for confined inspection points and for verifying mating parts during assembly. Simple care and long service life Maintenance for this class of inspection pin is straightforward: keep the working surface clean, inspect visually for scoring, and store in the supplied case to avoid contamination. The special steel material and workshop specification deliberately favour longevity under regular use, reducing the need for frequent replacements. When combined with a stable handling routine and protected storage, the pin sustains reliable dimensional performance over extended service periods. For workshop-ready precision and immediate availability, contact Metav Werkzeuge in Emmerich to request the M323.728 gauge pin with protective case or to discuss suitability for specific inspection tasks by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M323.728 GTIN: 4061905060137 Label: Prüfstift, einzeln, 7,28mm, +/- 0.001 mm Länge 50 mm Core data Diameter: 7.28 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Special features Material: special steel Workshop execution Supplied in protective transport case Category: gauge pins (Messstifte) FAQ What is the nominal diameter and tolerance of this gauge pin? The M323.728 gauge pin has a nominal diameter of 7.28 mm and a tight tolerance of ±0.001 mm, making it suitable for precise end‑measurement checks. How is the gauge pin supplied for safe storage and transport? The inspection pin is supplied in a protective transport case to prevent surface damage and contamination between uses. Which material is used for the inspection pin and why does it matter? The pin is made from special steel; this material provides wear resistance and dimensional stability under repeated workshop use. Can the pin be used in fixture and jig inspection tasks? Yes, the M323.728 is designed for fixture validation, plug checks and general reference measurements in production settings. Is this a single‑piece inspection element or part of a set? This item is supplied as a single gauge pin (single inspection element) intended for standalone reference measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.29mm Gauge Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Taking advantage of high repeatability and an exceptional ±0.001 mm tolerance, this workshop‑grade gauge pin delivers reliable end‑dimension checks and fast gauge setting; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.729 — Precision 7.29 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.729 is a single, workshop‑grade precision reference pin for end‑dimension checks, fixture setting and quality control in metallurgical and toolmaking environments Workshop-grade precision pin Diameter 7.29 mm ±0.001 mm Length 50 mm for fixture checks Made from special steel Accurate reference for tight tolerances This gauge pin provides industrial‑grade accuracy with a tolerance of ±0.001 mm, making it suitable for tasks where reproducibility is critical. Such a tolerance level reduces measurement scatter and supports consistent pass/fail decisions in inspection routines. The small form factor and controlled geometry ensure low runout and minimal contact variation, so the pin functions effectively as a reference element for bore gauges, plug gauges and alignment tools. The result is fewer re‑works and clearer quality records thanks to a stable dimensional benchmark. Built for workshop rigour and handling ease Manufactured in special steel and specified as a workshop‑grade item, the pin combines toughness with dimensional stability under regular use. The 50 mm length offers sufficient engagement for most fixture and gauge settings while keeping the component easy to handle and store. Surface finish and material selection reduce the risk of wear during repeated insertions, which helps preserve the stated tolerance over many cycles. Where quick changeovers or manual handling are common, this design balances durability with the precision expected in production environments. Streamlines inspection and traceability workflows Supplied as a single, clearly identified part (SKU M323.729) with a global trade item number, the pin eases inventory management and traceability in quality systems. Its use as a dedicated end‑dimension master or go/no‑go reference shortens verification routines: insert, check, record. For manufacturers aiming to tighten control loops or reduce inspection bottlenecks, the pin supports a rational, repeatable approach to dimensional assurance. Integration into existing gauge sets or fixture arrays is straightforward, enabling faster machine set‑ups and fewer stops on the production line. For precise end‑dimension checks choose the Metav IndustryLine M323.729 — contact Metav Werkzeuge for ordering and expert application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.729 GTIN: 4061905060144 Material: Special steel Diameter: 7.29 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Designation: Single gauge pin Version: Workshop execution Core measurements Diameter: 7.29 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.02 kg Features & applications Workshop‑grade execution Special steel material Suitable for end‑dimension checks and fixture setting Single item supply SKU for traceability M323.729 FAQ What accuracy can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.001 mm, so the M323.729 serves as a high‑precision reference for tight inspection limits. Which materials is the pin suitable for when used as a reference in inspection? As a reference component, the pin is material‑independent; the special steel construction ensures dimensional stability across typical workshop environments. Can this pin be used for gauge setting and fixture alignment? Yes, the 50 mm length and stable geometry make the M323.729 suitable for gauge setting, fixture alignment and end‑dimension verification tasks. How is the item identified for inventory and quality records? The part is listed under SKU M323.729 with GTIN 4061905060144, supporting clear traceability in quality systems. Is the pin intended for single or multiple insertions in production use? Designed as a workshop‑grade reference, the pin withstands repeated insertions; proper handling and storage will preserve the specified tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.2mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of high metrological reliability and compact handling: a precision gauge pin with ±0.001 mm tolerance and a 7.20 mm diameter that secures repeatable end‑size checks in inspection routines. Order the part directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin M323.720 — 7.20 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.720 is a single precision test pin designed for end‑size verification and dimensional checks in workshop and inspection environments. High-precision ±0.001 mm tolerance Diameter 7.20 mm, accurate fit for bore checks 50 mm compact length for end‑size control Workshop execution, robust design Precision that secures measurement certainty The compact test pin offers a ±0.001 mm tolerance (equivalent to 1 µm), which places it in the category of high‑precision reference artefacts for fine inspection tasks. With a 7.20 mm nominal diameter and a 50 mm overall length, the component functions as an unambiguous dimensional reference during pass/fail checks and plug inspections. Manufactured from special steel, the pin provides a stable datum for repeatability; the tight nominal tolerance reduces sorting error and supports reliable in‑process quality control. Ready for routine verification in the workshop Designed as a workshop execution item, the pin balances robustness with easy handling. Its low mass and compact dimensions enable quick insertion for go/no‑go procedures, while the special steel composition offers durability under frequent use. The single‑piece supply format is ideal where individual end‑size probes are required for selective checks or replacement within an existing gauge set. This format minimises downtime during maintenance of inspection rigs and supports straightforward inventory management for calibration cycles. Improves throughput in inspection workflows Integrating this precision pin into inspection workflows streamlines decision making: a clear dimensional reference accelerates go/no‑go decisions and reduces subjective gauging. The pin’s consistent geometry enhances repeatability across operators and measuring stations, thereby lowering scrap risk and rework rates. In metrology benches or assembly jigs, the artefact serves as a direct comparator to other measuring instruments, enabling efficient cross‑checks and traceable documentation of end‑size conditions. Contact Metav Werkzeuge for availability of the Metav IndustryLine M323.720 and advice on matching tolerance chains for production control; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.720 GTIN: 4061905059155 Manufacturer: Metav IndustryLine Facts Diameter: 7.20 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.02 kg Special features Workshop execution Material: Special steel Application: End‑size control Single precision test pin FAQ What tolerance does this gauge pin offer? The pin features a tolerance of ±0.001 mm, which corresponds to 1 µm and is suitable for high‑precision end‑size verification. Is the item supplied as a single pin or in sets? The M323.720 is supplied as a single test pin (SKU M323.720) for flexible integration into existing gauge assemblies. What is the base material of the test pin? This Metav IndustryLine gauge pin is manufactured from special steel, providing durability for routine workshop inspection. Is a calibration certificate included by default? A calibration certificate is not included by default; calibration status is specified separately when required. Which applications suit this precision pin? Typical uses include bore end‑size checks, go/no‑go verification, dimensional reference in inspection jigs and routine quality control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.31mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
High-precision end-measure checks are ensured by the combination of ±0.001 mm tolerance and a 7.31 mm diameter, while the robust workshop design and a 50 mm length support repeatable handling and quick inspection cycles. Order the M323.731 directly via Metav Werkzeuge or ask our consultants if needed. M323.731 Gauge pin — 7.31 mm, ±0.001 mm (Metav IndustryLine) The M323.731 is a single gauge pin for precise end-measure verification, designed for workshop inspection and dimensional control tasks. Workshop design for robust daily use Diameter 7.31 mm with ±0.001 mm accuracy 50 mm length in special steel Supplied as a single inspection pin High-precision tolerance for reliable pass/fail checks The gauge pin delivers a narrow ±0.001 mm tolerance that supports trustworthy go/no-go and reference measurements in quality control. Such a fine tolerance reduces ambiguity in acceptance decisions and helps to decrease rework by ensuring that bores and end measures are assessed against a stable reference. The 7.31 mm diameter and 50 mm length are optimised for handheld verification and fixture checks, giving a compact yet definite standard for dimensional comparison. Robust workshop execution that endures regular handling Built as a workshop version from special steel, this inspection pin withstands frequent use in production or maintenance environments. The compact mass and solid construction maintain straightness and resist deformation during routine handling, which preserves measurement certainty over many cycles. Delivered as an individual inspection pin, it is suitable for insertion into test assemblies or for use as a reference in manual gauge setups. Integrates easily into inspection routines and traceability Marked with SKU M323.731 and GTIN 4061905060168, the pin is ready for inventory tracking and process documentation. Its specification supports consistent dimensional sampling across batches, aiding statistical process control and batch acceptance. As a precise end-measure tool, it facilitates quicker decisions at the measuring bench and can be used alongside micrometres or calipers to confirm critical dimensions without adding complex setup time. Contact Metav Werkzeuge for procurement and technical advice on integrating the M323.731 into inspection routines; Metav’s specialists in Emmerich will assist with specifications and availability. Technical data Article number: M323.731 GTIN: 4061905060168 Material: Special steel Weight: 0.021 kg Facts Diameter: 7.31 mm Length: 50 mm Tolerance: ±0.001 mm Special features Workshop execution Supplied as a single inspection pin Intended for end-measure verification FAQ What precision does the gauge pin offer and where is it used? The M323.731 gauge pin provides a tolerance of ±0.001 mm, making it suitable for precise end-measure verification and go/no-go checks in workshop and inspection environments. What material is the pin made from and how does that help? Manufactured from special steel, the inspection pin offers mechanical stability and durability for frequent use, helping to maintain straightness and dimensional integrity during handling. Is the item supplied individually or as part of a set? This product is supplied as a single inspection pin, intended for individual use in measurement tasks or as a designated reference in quality procedures. Can the pin be used for routine production checks and traceability? Yes, the M323.731 is identified by SKU and GTIN, enabling straightforward inventory control and incorporation into documented inspection workflows for consistent batch verification. How should the pin be stored to retain accuracy? Store the inspection pin clean and dry, ideally in a corrosion‑free environment; avoid impacts and abrasive contact to preserve the fine ±0.001 mm tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.32mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine ±0.001 mm repeatability, a 7.32 mm diameter and a robust 50 mm length to ensure reliable end‑measure checks in production and inspection. Benefit from workshop‑grade durability and transport protection in a case; order the gauge pin directly through Metav Werkzeuge or consult the team for procurement advice. Gauge Pin M323.732 — Precision gauge pin, Ø 7.32 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The Gauge Pin M323.732 is a workshop‑grade reference pin for end‑measure verification and assembly checks in inspection, jigs and fixture setups. Workshop-grade precision pin ±0.001 mm Special steel construction for durability Diameter 7.32 mm, length 50 mm Supplied in transport case High‑precision measurement for reproducible inspection results Engineered for measurable repeatability, this reference pin delivers ±0.001 mm tolerance, enabling fine end‑measure validation where tight limits determine part acceptability. The compact diameter of 7.32 mm and a 50 mm length create a stable contact geometry that reduces measurement uncertainty during bench checks and plug‑gauge comparisons. Such quantifiable accuracy supports faster decision making on the shop floor and reduces scrap caused by marginal fits. Robust workshop design that survives everyday use Constructed from special steel, the pin combines surface hardness with corrosion resistance for extended service life in a production environment. The workshop execution focuses on practical handling: modest mass and a short overall length make the component easy to position within fixtures, while the supplied transport case protects the reference surface during storage and transit. This combination of durability and portability preserves calibration integrity between uses. Practical benefits across inspection, assembly and jigs Ideal for end‑dimension checks, control gauges and alignment tasks, the pin functions as a reliable datum in both small‑batch inspection and serial production sampling. Using a defined reference such as this pin improves process control by delivering a stable master against which micrometric deviations can be traced. Metav IndustryLine’s workshop range emphasises consistent availability and straightforward replacement when tools are used intensively. For procurement or to discuss specification matching for Metav IndustryLine reference pins—including the M323.732—contact Metav Werkzeuge for a tailored supply recommendation and delivery options. Technical Data SKU: M323.732 GTIN: 4061905060175 Weight: 0.021 kg Material: Special steel Diameter: 7.32 mm Length: 50 mm Tolerance: ±0.001 mm Category: Gauge pin / Messstifte Facts Precision tolerance ±0.001 mm Compact length 50 mm Small mass 0.021 kg Diameter 7.32 mm Workshop execution Special features Special steel construction Supplied in transport case for transport protection Intended use: end‑measure checks and reference gauging Story trigger: end‑dimension verification FAQ What accuracy can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.001 mm, providing the fine repeatability required for end‑measure verification and tight tolerance checks. Is the M323.732 suitable for fixture and jig use? Yes. The M323.732 from Metav IndustryLine is designed as a workshop‑grade reference pin and is well suited for fixtures, jigs and alignment operations thanks to its stable geometry and durable material. How is the pin delivered and protected during transport? The pin is supplied in a protective transport case to preserve the reference surface and minimise handling damage during transit and storage. What material is used and how does that affect wear resistance? Manufactured from special steel, the pin combines surface hardness and resistance to everyday workshop conditions, which helps maintain dimensional integrity over repeated use. Can this gauge pin be used for calibration masters or traceable standards? The gauge pin serves as a practical workshop reference for end‑dimension checks; for formal traceable masters and certificates, please consult Metav Werkzeuge for appropriate calibration options and documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.33mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Benefit from the combination of high-precision ±0.001 mm tolerance, robust special steel construction and transport-safe boxed delivery for consistent inspection results; order the gauge pin directly via Metav Werkzeuge or consult the advisors if specialised data is required. M323.733 Gauge pin — 7.33 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The M323.733 gauge pin is a workshop-grade inspection pin designed for end‑measure verification and dimensional testing in precision metrology Workshop version for robust use Dimensional tolerance ±0.001 mm Precision diameter 7.33 mm Delivered in protective transport case Repeatable accuracy for critical measurements The gauge pin delivers a guaranteed ±0.001 mm dimensional tolerance, tailored for tasks where small deviations have immediate consequences for assembly or quality control. With a 7.33 mm shaft diameter and a measuring philosophy grounded in repeatability, the pin simplifies go/no‑go checks and reference measurements. The fine tolerance reduces rework and rejects by enabling concise pass/fail decisions at fixture points or inspection benches, turning a series of manual checks into dependable verification steps. The dimensional specification supports traceable measurement outcomes that are straightforward to document for quality records. Built for daily workshop demands Manufactured in special steel and presented as a workshop‑grade item, the pin resists the wear common to high‑frequency use and maintains geometric stability. At a nominal length of 50 mm, the component is balanced for handling while providing sufficient engagement for end‑measure tasks and gauge applications. The compact, solid construction minimises flex and surface deformation, keeping contact geometry true across repeated cycles. The rugged design prioritises low maintenance and predictable service life, which is essential for production environments where tool downtime directly affects throughput. Supply reliability and process integration Delivered in a protective transport case, the pin arrives ready for safe storage and immediate use, reducing handling damage and contamination risk during transit. The product is traceable via its SKU and GTIN and is suitable for integration into existing inspection routines as a reference artefact or fixture gauge. Documentation supplied with the item supports inventory control and quality audits. Backed by a supplier that emphasises practical availability and consistent stock, the component helps maintain uninterrupted inspection capability on the shop floor while simplifying procurement and replacement planning. For workshop-ready precision and dependable availability, request the M323.733 gauge pin from Metav Werkzeuge or contact the technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 to discuss suitability for specific inspection tasks Technical data Article number: M323.733 GTIN: 4061905060182 Weight: 0.021 kg Label: Prüfstift, einzeln, 7,33mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.33 mm Length: 50 mm Tolerance: ±0.001 mm Category: Messstifte Special features Material: Special steel Version: Workshop‑grade execution Packaging: Delivered in protective transport case Story trigger: endmasse FAQ What tolerance does this gauge pin provide? The M323.733 gauge pin is specified with a tolerance of ±0.001 mm, ensuring high repeatability for critical inspection points. Which material is used for the pin? The pin is made from special steel, chosen for its wear resistance and dimensional stability in workshop environments. Is the item supplied ready for safe storage and transport? Yes, the product is shipped in a protective transport case to reduce handling damage and contamination risk during transit. What length and diameter can be expected from this test pin? The inspection pin measures 50 mm in length with a precision diameter of 7.33 mm. How is the product referenced for ordering and traceability? Ordering and traceability are facilitated by the SKU M323.733 and GTIN 4061905060182, which appear on product documentation Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.34mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Choose the combination of ±0.001 mm accuracy, a 7.34 mm nominal diameter and a 50 mm working length for consistent end‑measure checks; the workshop‑grade construction in special steel and delivery in a protective transport case make the pin a dependable tool for routine inspection — order the Test pin M323.734 directly via Metav Werkzeuge or ask our consultants if needed. Test pin M323.734 — Workshop gauge pin, Ø 7.34 mm, ±0.001 mm (Metav IndustryLine) A Test pin M323.734 designed for precise end‑measure and fit checks in workshop inspection jigs and fixture setups. Diameter 7.34 mm with ±0.001 mm tolerance Length 50 mm for standard inspection setups Workshop‑grade finish for daily use Made from special steel for stability Supplied in protective transport case Precision that supports reliable inspection The single gauge pin delivers a ±0.001 mm tolerance on a 7.34 mm nominal diameter over a 50 mm length, offering measurable improvement in locating and fit verifications. Such fineness of tolerance reduces measurement uncertainty in repetitive checks and is particularly useful where small deviations affect assembly quality. The pin functions as a reference dowel for end‑stop and bore verification, providing repeatable seating and consistent contact geometry for comparative measurements. Robust design for workshop environments Built as a workshop‑grade test pin from special steel, the component balances surface hardness and dimensional stability to withstand regular handling and insertion cycles. The compact mass (approx. 0.021 kg) and plain geometry simplify cleaning and visual inspection after use; the supplied protective transport case prevents nicks and contamination during storage and transit. This durability makes the pin suitable for frequent shop‑floor inspections without compromising the nominal diameter or the tight tolerance band. Practical integration into quality workflows The gauge pin acts as a straightforward measuring artefact within quality control routines: ideal for end‑measure validation, go/no‑go assembly trials, and as a reference in fixture set‑up. Its simple geometry allows direct comparison against bore gauges, micrometers or comparator arrangements, supporting faster inspection cycles and clearer pass/fail decisions. When used consistently as a reference element, the pin contributes to process stability and helps document repeatability across shifts and operators. For professional procurement or technical advice about the Metav IndustryLine Test pin M323.734, contact Metav Werkzeuge for supply and specification support from Emmerich. Technical data Article number: M323.734 GTIN: 4061905060199 Material: special steel Weight: 0.021 kg Diameter: 7.34 mm Tolerance: ±0.001 mm Length: 50 mm Facts Measurement range min: 7.34 mm Measurement range max: 7.34 mm Accuracy: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Workshop version Supplied in protective transport case Single test pin Category: Gauge pin (Messstifte) Manufacturer brand: Metav IndustryLine FAQ What tolerance does this gauge pin offer? The Test pin M323.734 from Metav IndustryLine offers a tolerance of ±0.001 mm on a nominal diameter of 7.34 mm. Is this pin suitable for workshop use? Yes — the product is a workshop‑grade test pin made from special steel and is supplied in a protective transport case for everyday handling and transport. Can the pin be used for end‑measure and fit checks? The gauge pin M323.734 is intended for end‑measure, fit and locating checks and is suitable for use with fixture setups and simple go/no‑go trials. Is a calibration certificate supplied with the pin? The product data does not state that a calibration certificate is included; the delivery comprises the single gauge pin as described. Is this item supplied as a single pin or as a set? This entry describes a single test pin (single item), article number M323.734 from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.35mm Test Pin Single, ±0.001 mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometre‑level repeatability, robust workshop design and compact 50 mm length for reliable end‑gauge and inspection work; order directly via Metav Werkzeuge or consult our specialists for application matching. M323.735 test pin (gauge pin) — 7.35 mm, ±0.001 mm, 50 mm length The M323.735 is a single precision test pin designed for high‑accuracy dimensional checks and end‑gauge applications in workshop and inspection environments. High‑precision ±0.001 mm tolerance Solid 7.35 mm nominal diameter Robust workshop execution Compact 50 mm length for tight fixtures Micrometre precision for reproducible checks The inspection pin delivers a tolerance of ±0.001 mm, which places it in the sub‑micrometre performance class for routine high‑precision checks. This level of accuracy ensures repeatable fits when verifying bore diameters, setting gauges or comparing reference plugs. Explained simply: the stated deviation limits the maximum dimensional error to one thousandth of a millimetre, which is suitable for demanding measurement tasks where interchangeability and process reliability are essential. Built to withstand workshop use while preserving accuracy Manufactured from special steel, the pin combines dimensional stability with a practical workshop design. The 50 mm length and solid construction make the component easy to handle on benches and in fixtures, while the compact format reduces flex during inspection. Supplied as a single test pin with a nominal 7.35 mm diameter, the item is intended for integration into routine quality checks and for use as a reference member in measurement setups where compact, rugged gauges are required. Integrates simply into inspection and setup routines As a gauge component, the pin is well suited to tasks such as end‑measure validation, bore verification and fixture alignment. Its compact form factor allows insertion into tight bores and jigs, supporting quick go/no‑go assessments and comparative measurements on the shop floor. The precision specified supports predictable outcomes in serial checks and small‑series production, reducing the time spent on rework and aiding stable process control. For application advice or to obtain the Metav IndustryLine M323.735 for micrometre‑critical inspection tasks, contact Metav Werkzeuge in Emmerich to match the pin to specific measurement needs. Technical data Article number: M323.735 GTIN: 4061905060984 Label: Test pin, single, 7.35 mm, ±0.001 mm, 50 mm length Facts Diameter: 7.35 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.021 kg eClass: 21170231 Special features Material: Special steel Workshop execution Single test pin delivery Category: Gauge pin (Messstifte) FAQ What nominal diameter does the pin have? The pin is manufactured to a nominal diameter of 7.35 mm (M323.735), suitable for precision bore and fit checks. What accuracy is specified for this test pin? The M323.735 is specified with a tolerance of ±0.001 mm, enabling sub‑micrometre repeatability for inspection work. Which applications are suitable for this gauge pin? The pin is intended for end‑gauge verification, bore inspections, fixture set‑up and routine dimensional checks where compact, high‑precision reference members are required. What material is used and does it suit workshop use? Made from special steel, the pin combines dimensional stability with a workshop‑grade design for dependable handling in inspection environments. How is the test pin supplied and what is its length? The product is supplied as a single test pin with a 50 mm overall length and a nominal diameter of 7.35 mm. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.36mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of sub-micron repeatability, compact form and robust workshop construction for dependable end-measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.736 — single gauge pin, Ø 7.36 mm, ±0.001 mm (Metav IndustryLine) The M323.736 gauge pin serves as a workshop-grade, single gauge pin for precise end-measure verification and fit checks in inspection and assembly environments. High-precision ±0.001 mm tolerance Diameter 7.36 mm for end-measure tasks Length 50 mm for deeper bore verification Workshop version for robust daily use Precision that supports repeatable inspection results High-resolution dimensional control is essential in inspection routines. The gauge pin delivers a tolerance of ±0.001 mm, enabling reliable end-measure verification and close-pass/fail assessments. Manufactured for measurement tasks, the pin's nominal diameter of 7.36 mm and rigid 50 mm shank minimise deformation during insertion, which reduces measurement scatter and supports reproducible outcomes in serial quality checks. This level of accuracy is especially relevant where small clearances determine assembly quality. Robust design tailored to workshop conditions A tough construction using special steel ensures durability under regular handling and contact with metalworking environments. The workshop specification provides a balance between wear resistance and dimensional stability, so the pin stands up to repeated use without rapid loss of form. The compact geometry and solid material also aid in tactile feedback during manual gauging, making the tool suitable for both bench inspection and inline quality control processes. Practical handling and inspection benefits At 50 mm overall length, the pin reaches into deeper bores while remaining easy to position by hand or in simple fixtures. The single-pin format streamlines end-measure checks where individual reference gauges are preferred over set kits, supporting quick go/no-go assessments and straightforward part verification. The combination of nominal diameter and tight tolerance reduces the need for secondary measurement steps when checking fit, saving time across repetitive inspection cycles. Integration into quality workflows Designed for routine use in inspection bays and assembly benches, the pin complements standard gauge sets and measuring programmes. Its precise specification facilitates traceable results when logged in quality documentation, and the clear nominal and tolerance values simplify pass/fail criteria in inspection plans. The product supports quality-focused teams seeking consistent dimensional control without complex measuring setups. For workshop-grade end-measure checks, request the Metav IndustryLine gauge pin M323.736 via Metav Werkzeuge for delivery and application guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: M323.736 GTIN: 4061905060991 Material: Special steel Nominal diameter: 7.36 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.021 kg Facts Diameter (nominal) 7.36 mm Length 50 mm Accuracy ±0.001 mm Weight 0.021 kg Single-piece supply Special features Workshop execution Application: end-measure verification Category: gauge pin / inspection pin Story trigger: end measures FAQ What level of precision can be expected from this gauge pin? The M323.736 gauge pin is specified at ±0.001 mm accuracy, making it suitable for high-precision end-measure checks and tight-fit assessments. Which material is used for the pin and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability to ensure consistent performance in workshop environments. Is this pin suitable for measuring deeper bores? With a 50 mm length, the gauge pin reaches into deeper bores and supports reliable fit checks where standard short pins would not suffice. Can the pin be used for go/no-go checks or only for direct measurement? The single-pin format is well suited to both direct dimensional verification and simple go/no-go assessments when used alongside calibrated references. How should the pin be stored to maintain accuracy? Store the pin in a protected, dry environment and avoid knocks or abrasive contact; the workshop-grade finish supports durability but careful storage preserves the ±0.001 mm specification. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.37mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine tolerance and robust workshop design for consistent end‑dimension verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application support. Gauge pin M323.737 — precision inspection pin, 7.37 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.737 is a precision inspection pin intended for end‑dimension checks and verification tasks in metrology and workshop environments. Workshop version for everyday inspection Diameter 7.37 mm with ±0.001 mm accuracy Length 50 mm for standard end‑dimension checks Made from special steel for wear resistance Consistent results where tolerances matter The gauge pin delivers an exceptional dimensional stability thanks to its tight manufacturing tolerance of ±0.001 mm. Such precision reduces uncertainty during go/no‑go assessments and supports reliable fit checks on mating parts. In practice, the fine tolerance is suited to applications where end‑dimensions determine assembly success or functional clearance; the narrow variance helps to lower rejection rates and shortens inspection cycles without increasing measurement complexity. Built for workshop use and repeated handling Designed as a workshop configuration, the pin is produced from special steel that balances surface hardness and resistance to wear. The 50 mm length provides a stable reference for end‑dimension verification while remaining easy to handle during rapid checks. The compact format and hardened material ensure that the reference surface retains form across many inspection cycles, so throughput can be increased without compromising the reference quality of the measuring tool. Easy incorporation into standard inspection routines This inspection pin is optimised for quick integration into quality control workflows and routine gauging sets. Its nominal 7.37 mm diameter matches common end‑dimension checks for turned and milled parts, enabling straightforward substitution into existing plug gauge arrays or comparator fixtures. The clear numerical specification and robust construction support traceable processes and allow technicians to focus on repeatability and throughput rather than frequent replacement. For tailored advice on using Metav IndustryLine inspection pins or to arrange delivery from Metav Werkzeuge's Emmerich stock, contact Metav Werkzeuge for precise application guidance and dependable supply. Technical data Article number: M323.737 GTIN: 4061905061134 ECLASS: 21170231 Label: Prüfstift, einzeln, 7,37mm, +/- 0.001 mm Länge 50 mm Core measurements Diameter: 7.37 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.021 kg Special features Workshop version Material: Special steel Single inspection pin for end‑dimension checks Intended for end‑dimension verification FAQ What is the declared measurement tolerance of the gauge pin? The gauge pin M323.737 is specified with a tolerance of ±0.001 mm, providing a tight reference for critical end‑dimension checks. What diameter and length does the pin have? The inspection pin has a nominal diameter of 7.37 mm and a length of 50 mm, suitable for a broad range of plug‑type verification tasks. Which material is used for this inspection pin? This single gauge pin is made from special steel, selected to offer a balance of hardness and wear resistance for workshop conditions. Is the product suitable for regular workshop verification tasks? Yes — the item is a workshop‑grade inspection pin designed for repeated handling and routine end‑dimension verification in production and repair environments. How can the M323.737 be integrated into existing inspection equipment? The pin’s standardised diameter and length allow straightforward use in plug gauge arrays, comparator fixtures or as a handheld reference during inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.38mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of ultra‑fine 1 µm tolerance, robust special steel construction and a compact 50 mm working length for consistent final‑dimension checks; order the item directly via Metav Werkzeuge or consult our specialists for suitability in specific inspection tasks Gage pin M323.738 — 7.38 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) The Gage pin M323.738 is a single precision test pin for final inspection and verification of bores, gauges and fixture alignment in workshop environments Workshop version for everyday inspection Diameter 7.38 mm with ±0.001 mm tolerance Length 50 mm for compact reach Made from special steel for durability Reduce rejects with repeatable 1 µm accuracy A tolerance of ±0.001 mm corresponds to 1 µm, a level of precision that turns routine checks into reliable evidence for dimensional conformity. The test pin is manufactured to tight limits so that reference checks, go/no‑go evaluations and comparative measurements become repeatable steps in an inspection routine. This degree of accuracy reduces rework and supports quality assurance processes by giving a stable benchmark for pass/fail decisions. Durable design made for workshop handling The workshop‑oriented construction uses special steel to balance wear resistance and machinability, providing a long service life under frequent handling. At 50 mm overall length the pin offers a compact reach suited to small‑bore checks and fixture alignment while remaining easy to handle. The single‑item supply simplifies inventory for specific replacement needs and supports immediate use in bench jigs or pin gauges without additional preparation. Fits into standard inspection workflows with clear identification Supplied as a single precision test pin, the component integrates with established checking procedures for final dimensions and end‑mass verification. The product carries GTIN 4061905061141 for traceability and stock management. Because the specification concentrates on a single diameter of 7.38 mm and a sub‑micrometre tolerance, it is particularly useful where precise mating fits or reference pins are required rather than broad‑range gauge sets. Contact Metav Werkzeuge today for application advice or to secure Metav IndustryLine gage pins with 1 µm tolerance — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: M323.738 GTIN: 4061905061141 Category: Gage pin Manufacturer: Metav IndustryLine Measured values Diameter: 7.38 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Workshop version Material: special steel Single item supply ECLASS: 21170231 FAQ What is the exact tolerance of this gage pin? The gage pin M323.738 is specified with a tolerance of ±0.001 mm, equivalent to 1 µm. Which material is used for the test pin? The Metav IndustryLine gage pin is made from special steel to ensure durability under regular workshop use. Is the pin supplied as a set or individually? This item is supplied as a single precision test pin; it is intended for individual replacement or specific application use. For which inspection tasks is this pin suitable? The pin is designed for final inspection tasks such as bore verification, gauge checks and fixture alignment where a 7.38 mm reference and 1 µm accuracy are required. How should the gage pin be stored to maintain accuracy? Store the pin in a dry, clean environment and protect it from impacts; avoid prolonged exposure to corrosive agents to preserve the dimensional stability of the special steel. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.39mm Test Pin ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
Combining ±0.001 mm dimensional accuracy with a 7.39 mm nominal diameter and robust special steel construction, this gauge pin delivers reliably repeatable end measurements for workshop inspection tasks. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single 7.39 mm — ±0.001 mm accuracy · 50 mm length (Metav IndustryLine) The Gauge pin, single 7.39 mm is a compact precision pin for end‑measurement and functional gauging in workshop and inspection environments. ±0.001 mm dimensional accuracy 50 mm precision‑ground length Special steel construction Delivered in transport case Reliable accuracy that lowers rework rates A high‑precision measuring element with ±0.001 mm tolerance, this gauge pin is designed for tasks where small deviations affect assembly and part performance. The nominal 7.39 mm diameter is ground to tight tolerances so that checks on seats, bores and end faces yield repeatable results. In practice, improved repeatability reduces downstream rework and inspection time because measurement spread is minimised, supporting faster decision‑making on the shop floor. Built for everyday workshop use Supplied as a workshop version, the pin combines precision with practical durability. The body is manufactured from special steel, providing wear resistance under regular use, while a precision‑ground 50 mm length offers a comfortable reach for most small component checks. Delivery in a protective transport case preserves the ground surfaces during storage and transit, ensuring the pin remains ready for accurate use when required. Practical benefits for inspection and production control This gauge pin excels in end‑measurement, positional checking and functional gauging workflows, forming a simple, low‑risk verification step in quality control. By integrating a high‑accuracy pin into routine inspection procedures, the risk of accepting out‑of‑tolerance parts is reduced and inspection throughput can be increased without sacrificing confidence. The compact geometry also makes the pin suitable for tight fixturing situations common in precision engineering. Easy handling and clear specification for procurement With a net mass of approximately 21 g, the pin is lightweight and easy to position by hand or in small fixtures. The concise specification — diameter, length and tolerance — simplifies documentation and procurement, allowing fast replacement and consistent inventory control. For buyers seeking traceability or special calibration, Metav Werkzeuge can advise on available options and supply chains that match production requirements. For reliable supply of Metav IndustryLine precision gauge pins and tailored advice on suitability or calibration, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and application support. Technical Data Article number: M323.739 GTIN: 4061905061158 Label: Prüfstift, einzeln, 7,39mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.39 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.021 kg Special features Material: Special steel Workshop version Delivered in transport case FAQ What tolerance is guaranteed for this gauge pin? The gauge pin is manufactured and specified with a tolerance of ±0.001 mm, ensuring very fine dimensional control for small‑scale inspection tasks such as end measurements. Is this pin suitable for functional gauging in a production environment? Yes, the workshop version and robust special steel construction make this pin appropriate for routine functional checks and go/no‑go verification within production and inspection routines. Does the pin come with protective packaging for transport? The pin is supplied in a protective transport case to preserve the ground surfaces and reduce the risk of handling damage during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.3mm Test Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of ±0.001 mm repeatability, robust special steel construction and a compact 50 mm length for dependable final-dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored inspection support. Gauge pin M323.730 – 7.30 mm ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.730 is a workshop-grade precision pin intended for final-dimension verification and end-measure checks in production and inspection environments. Workshop-grade construction for daily use Diameter 7.30 mm with ±0.001 mm accuracy 50 mm pin length for stable handling Special steel for long-term dimensional stability Precision that reduces rework and speeds inspection The gauge pin delivers ±0.001 mm nominal deviation, making it suitable where tight dimensional control is essential. This level of accuracy minimises scrap and rework by providing a reliable reference for end measurements and comparative checks. The 7.30 mm diameter is ground to a controlled tolerance, enabling consistent fit and repeatable contact conditions when used with pin gauges, plug templates or inspection jigs. Where routine verification is part of a quality workflow, this precision reduces decision uncertainty and shortens the time required to confirm conformance. Robust design for workshop conditions Manufactured from special steel, the pin balances wear resistance with stable dimensional behaviour under typical workshop handling. The 50 mm length provides sufficient engagement for direct measurement or fixturing while remaining easy to handle and position. The workshop-grade specification indicates mechanical resilience for frequent use and makes the component a practical choice for bench checks, incoming inspection and assembly fixtures. By combining a compact form factor with a high-precision finish, the pin supports reliable measurement cycles without adding complexity to existing processes. Practical integration into inspection routines Engineered for straightforward use in production control, the pin functions as a fixed reference in comparative checks and as a tactile standard for setting gauges or aligning fixtures. The light weight and compact dimensions permit rapid placement and removal, which keeps inspection throughput high. Compatibility with standard metrology accessories is implicit in the design, allowing technicians to establish quick go/no-go criteria or to validate measuring equipment with minimal setup. The result is a pragmatic solution that supports consistent part verification while keeping inspection steps efficient. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.730 can be integrated into inspection plans; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.730 GTIN: 4061905060151 Manufacturer: Metav IndustryLine Facts Diameter: 7.30 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.021 kg Special features Material: Special steel Single test pin delivery Workshop version Intended for end-dimension verification FAQ What tolerance does the gauge pin offer? The gauge pin M323.730 provides a nominal tolerance of ±0.001 mm for tight dimensional control in inspection tasks. What are the physical dimensions and weight of the pin? The pin has a diameter of 7.30 mm, a length of 50 mm and a weight of 0.021 kg. Which material is used for this test pin? This Metav IndustryLine pin is made from special steel designed for dimensional stability and workshop use. Is the pin suitable for routine production checks? Yes, the M323.730 gauge pin is specified as a workshop-grade item and is intended for repeatable end-measure verification and comparative checks within production and inspection workflows. Can the pin be used with standard metrology fixtures and gauges? The pin’s ground diameter and compact form factor make it compatible with common fixtures, plug templates and pin gauge arrangements for quick verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.41mm Gauge Pin, Workshop Version, ±0.001mm Accuracy, 50mm Length, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, a 7.41 mm nominal diameter and a robust 50 mm length for repeatable end‑measure verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.741 gauge pin — workshop version, 7.41 mm, ±0.001 mm The M323.741 is a single precision gauge pin for workshop inspection and end‑measure verification, designed for robust handling and accurate pass/fail checks. Workshop version for robust use Diameter 7.41 mm with ±0.001 mm tolerance 50 mm overall length for depth checks Supplied in protective transport box Accuracy that reduces rework and inspection time The gauge pin delivers a ±0.001 mm tolerance on a 7.41 mm diameter, providing a reliable reference for go/no‑go checks and dimensional verification. This level of accuracy lowers the risk of undetected deviations in small bores or mating parts, which translates into fewer rejects and less rework. As a hardened measuring element made from Spezial‑Stahl, the pin maintains its form under regular use, ensuring repeatable results and a consistent reference across inspection cycles. Built for practical workshop use and simple handling Engineered as a workshop version, the precision pin combines a compact profile with a 50 mm overall length that is suitable for depth and through‑hole checks without sacrificing rigidity. The supply in a protective transport box preserves the calibrated surface during storage and transit, aiding traceability and preventing accidental damage. The single‑piece design simplifies fixture use and quick interchange in checks where fast throughput and reliable handling matter. Integration into quality routines with immediate benefits The pin is ideal for standardised end‑measure verification and quick dimensional control steps in small‑batch production or maintenance tasks. By providing an objective reference, this precision element supports streamlined decision making on the shop floor and clear documentation of measurement results. The robust construction and clear specification promote confidence in inspection outcomes and help sustain an efficient quality workflow across machine, toolroom or assembly station environments. For tailored advice or to secure the M323.741 gauge pin for immediate dispatch, contact Metav Werkzeuge to discuss application details and delivery options. Technical data Article number: M323.741 GTIN: 4061905061172 Brand: Metav IndustryLine Core technical data Nominal diameter: 7.41 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Workshop execution Supplied in protective transport box Single test pin for end‑measure verification Material: Spezial‑Stahl FAQ What applications suit this gauge pin best? The gauge pin is intended for precise end‑measure verification and quick go/no‑go checks in workshop inspection, particularly where a 7.41 mm reference and ±0.001 mm accuracy are required; the M323.741 performs well for small bore and mating part control. Is the M323.741 suitable for repeated shop‑floor use? Yes, the workshop design and Spezial‑Stahl construction make the M323.741 resilient for regular use; the supplied protective transport box preserves the measuring surface between inspections. Can this pin be used as a master for setting gauges? The pin’s tight tolerance and stable material properties allow the M323.741 to serve as a reference master for setting or checking small gauges and fixtures in routine quality processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.42mm Gauge Pin ±0.001 mm 50mm Length Workshop Finish - Metav IndustryLine
Benefit from fast, measurable inspection and repeatable end‑measure control thanks to a high‑precision diameter of 7.42 mm, a minimal tolerance of ±0.001 mm and a compact 50 mm length; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.742 — Precision gauge pin, 7.42 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Gauge pin M323.742 is a workshop-grade cylindrical gauge pin intended for end‑measure verification, plug gauges and assembly checks in metrology and production inspection. Ultra-fine tolerance ±0.001 mm Exact diameter 7.42 mm 50 mm overall length Workshop-grade special-steel Reduce inspection time with measurable precision High repeatability shortens inspection loops: the ±0.001 mm tolerance delivers measurable certainty for end‑measure checks and small‑bore verifications. The slender cylindrical geometry permits quick pass/fail gauging and simple interchange in fixtures, reducing setup time and minimising throughput interruptions. Using a hardened, wear‑resistant construction means fewer replacements and steadier process capability over many cycles, which directly supports lean inspection routines and lower scrap rates. Reliable under workshop conditions Constructed from special steel, this single gauge pin is designed for robust handling and routine use on the shop floor. The moderate 50 mm overall length provides a balance between access and stiffness so that bending and measurement error are minimised during handling and insertion. Surface finish and material selection are chosen to resist galling and to preserve true diameter under repeated contact, which increases service life and maintains traceable measurement performance in daily quality checks. Simple integration into quality control workflows The cylindrical gauge pin is a compact tool for both manual and semi‑automated gauging applications. Its specification supports straightforward documentation and stockkeeping: the nominal diameter (7.42 mm) and the declared tolerance (±0.001 mm) allow direct comparison with drawing tolerances and gauge plans. For batch inspections or fixture validation, the pin acts as a definitive end measure, assisting in conforming to dimensional control plans and supporting consistent production decisions. Request the Metav IndustryLine M323.742 through Metav Werkzeuge for reliable end‑measure verification or contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.742 GTIN: 4061905061189 Manufacturer: Metav IndustryLine Facts Diameter: 7.42 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Material: special steel Single gauge pin, workshop version Intended use: end‑measure verification, plug gauging FAQ What is the declared accuracy of this gauge pin? The gauge pin is specified with a tolerance of ±0.001 mm, making it suitable for fine dimensional verification tasks. Can the pin be used for plug gauge checks or assembly alignment? Yes, the cylindrical geometry and tight diameter tolerance make it appropriate for plug gauging and alignment in fixtures and assemblies. Which material is used and how does it affect durability? The pin is made from special steel, selected for wear resistance and to maintain diameter stability during repeated use. How is the gauge pin documented for stock and traceability? Identification includes the article number M323.742 and GTIN 4061905061189, which supports clear stockkeeping and traceable measurement practice. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.43mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy, robust special‑steel construction and a compact 50 mm length for reliable end‑measure checking in workshop and inspection environments. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.743 — single gauge pin, Ø 7.43 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.743 designed for high‑precision end‑measure verification and plug‑gauge checks in workshop and production inspection settings. Diameter 7.43 mm, tolerance ±0.001 mm 50 mm overall length for compact fixtures Special steel construction for wear resistance Workshop execution for robust daily use Achieve consistent fits with µm‑level certainty The principal advantage of this gauge pin is its ±0.001 mm tolerance, which provides micrometre‑level repeatability for critical end‑measure checks. Such accuracy reduces uncertainty in go/no‑go decisions and minimises rework by delivering a clear, reproducible reference for bore and hole verifications. The tight tolerance is particularly valuable where assembly clearances are small and component interchangeability is mandatory, translating directly into fewer rejects and higher process confidence. Durable, compact design that suits inspection jigs Constructed from special steel, the pin balances hardness and toughness to withstand repeated contact in measurement jigs and fixtures. The 50 mm length and compact diameter make the pin simple to mount in test assemblies or to use as a reference plug in manual inspections. Its workshop execution ensures a finish and robustness aimed at everyday industrial handling, maintaining dimensional integrity under normal operating conditions while keeping handling straightforward for machinists and quality engineers. Integrates cleanly into measurement routines and documentation The gauge pin serves as a practical tool in routine inspection plans and first‑article checks, supporting traceable measurement workflows when combined with calibrated comparators or tactile probes. Clear product identification and a precise specification make it straightforward to record results in quality documentation and measurement logs. For customers seeking integration guidance or confirmation that this plug suits a particular assembly or fixture, Metav Werkzeuge offers technical advice from its Emmerich centre to support correct application and setup. Secure precision verification with the Metav IndustryLine gauge pin M323.743 — contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich. Technical data Article number: M323.743 GTIN: 4061905061196 Label: Gauge pin, single, Ø 7.43 mm, ±0.001 mm, length 50 mm Category: Gauge pins Facts Diameter: 7.43 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Material: Special steel Execution: Workshop version Application: End‑measure checks and plug‑gauge verification Intended use: Inspection, fixture reference FAQ What is the primary use of this gauge pin? The gauge pin M323.743 from Metav IndustryLine is intended for precise end‑measure verification and plug‑gauge checks where a 7.43 mm reference is required. Does the pin come with a calibration certificate? No ISO 17025 calibration is specified for this item; the pin is supplied to the stated manufacturing tolerance of ±0.001 mm. Which materials is the pin suitable for when used as a reference? Constructed from special steel, the pin is designed to act as a durable reference in inspection jigs and does not depend on the measured material for its function. Can this gauge pin be used in fixture assemblies and go/no‑go checks? Yes, the compact 50 mm length and precise diameter make the pin suitable for jigs, fixtures and manual go/no‑go verification procedures. How is the product identified for inventory and procurement? The gauge pin is listed as M323.743 (GTIN 4061905061196) for procurement and traceability in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.44mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Precision gauging with ±0.001 mm tolerance, a compact 7.44 mm diameter and a 50 mm length delivers repeatable end‑measurements for workshop inspection. Combined with a special steel construction and workshop‑grade design, this gauge pin supports reliable daily comparisons and fit checks. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application guidance. Gauge pin, single — 7.44 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin, single (7.44 mm) for precision end‑measurements and component inspection in workshop environments Workshop version for robust daily use Diameter precisely 7.44 mm, tolerance ±0.001 mm 50 mm length for versatile positioning Made from special steel for wear resistance Measurements that reduce uncertainty in inspection The gauge pin offers an extremely tight ±0.001 mm tolerance, equivalent to 1 µm, which makes it suitable for dimensional checks where sub‑micrometre differences matter. Classified in the micro range (measurement ranges up to 100 mm), this size class is optimised for fine mechanical parts and short‑span checks: the relatively short length and compact diameter minimise bending and handling error, ensuring that end‑measurements and plug fits are representative of the part rather than the measuring tool. Using such a high‑precision pin reduces false rejects and shortens decision cycles in quality control. Robust construction for everyday workshop use Manufactured from special steel, the pin is engineered for abrasion resistance and dimensional stability under repeated seating operations. The workshop version designation indicates a build that tolerates frequent handling and routine use in production areas while still maintaining tight tolerance. At 50 mm overall length the pin provides sufficient reach for many fixture configurations while remaining easy to position by hand or in gauge blocks, enabling faster comparison tasks and steadier contact during inspection. Practical integration into metrology and production workflows As a dedicated measurement accessory, the pin integrates into simple plug gauges, checking rigs and inspection benches to speed up go/no‑go assessments and end‑measurement verification. Its precise diameter supports consistent fits for mating bores, dowels and seating surfaces, lowering the risk of rework caused by dimensional uncertainty. For teams implementing lean inspection routines, the pin provides a compact, low‑effort way to maintain traceable checks and repeatable pass/fail decisions while fitting easily into existing sorting or control stations. For workshop‑ready gauge pins from Metav IndustryLine and tailored advice on integrating precision pins into inspection processes, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.744 GTIN: 4061905061202 Eclass: 21170231 Label: Prüfstift, einzeln, 7,44mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.44 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Material: Special steel Design: Workshop execution Application: End measurements / gauging Measurement class: Micro range (max 10–100 mm) Packaging: single item delivery FAQ What level of precision does this gauge pin provide? The gauge pin delivers a precision of ±0.001 mm (1 µm), making the M323.744 suitable for high‑accuracy end‑measurements and close‑tolerance fits. Is the pin suitable for use in production inspection stations? Yes, the workshop execution and robust special steel construction permit repeated use in production and inspection benches without compromising repeatability. Which measuring tasks is the pin best suited for? It is ideal for plug fits, bore checks and end‑measurements on small to medium components where micro‑range accuracy is required. Can the pin be used with existing gauging fixtures and blocks? The 50 mm length and standardised diameter make the pin compatible with many fixtures and gauge assemblies for quick integration. What materials is the pin intended to check or fit against? The pin is designed as a dimensional reference for mating bores and seats across typical workshop materials; suitability will depend on the mating component and inspection method. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.45mm Gauge Pin, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy, sturdy workshop design and simple integration into inspection routines for reliable end‑measure checks. Order the part directly via Metav Werkzeuge or request advice from their precision consultants. M323.745 gauge pin — precision 7.45 mm, ±0.001 mm, length 50 mm (Metav IndustryLine) A M323.745 gauge pin designed for high‑accuracy end‑measure inspection and everyday workshop metrology. Sub‑micron tolerance ±0.001 mm Diameter 7.45 mm for precise end fits Workshop‑grade special steel design Reduce rework with consistent, traceable fits The M323.745 delivers a ±0.001 mm tolerance that keeps dimensional variation to the micrometre level. This degree of precision ensures consistent plug and socket fits during inspection and assembly, reducing rejected parts and rework. Used as a reference in go/no‑go checks and end‑measure verification, the pin supports process stability and reproducible quality results across production batches, which in turn helps to lower overall manufacturing costs. Robust construction for routine shop use Manufactured from special steel, the pin combines dimensional stability with everyday durability typical of a workshop execution. At a length of 50 mm and a nominal diameter of 7.45 mm, the component is compact yet rigid, allowing straightforward handling and repeatable seating in fixtures. The modest mass also facilitates quick manual checks and minimises operator fatigue during frequent use, while the single‑piece design keeps alignment and contact geometry stable over many cycles. Easy to integrate into existing inspection setups Designed for end‑measure inspection and fixture verification, the pin works well in handheld gauges, fixture checks and as a reference in comparative testing. The specified tolerance of ±0.001 mm corresponds to one micrometre and is suited to fine mechanical and precision engineering contexts where tight clearances matter. For users less familiar with metrology jargon: this tolerance means the diameter deviates by no more than one thousandth of a millimetre, ensuring precise, reliable measurements when used as a reference or test mandrel. Practical handling, clear identification and application notes The component’s compact dimensions and workshop‑grade finish make it straightforward to store and route between benches and fixtures. Traceability is supported by the clear article identification and GTIN for inventory systems, easing procurement and stock control. When specifying the pin for gauges and end‑measure tools, consider mating clearances and fixture alignment to preserve the micrometre accuracy in your measurement chain. Contact Metav Werkzeuge in Emmerich for specification advice and supply of the M323.745 gauge pin. Technical data Article number: M323.745 GTIN: 4061905058578 ECLASS: 21170231 Category: Gauge pins Label: Precision gauge pin 7.45 mm ±0.001 mm, length 50 mm Facts Diameter: 7.45 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.021 kg Special features Material: special steel Workshop execution for routine use Designed for end‑measure inspection High dimensional stability for plug and fixture checks FAQ What is this part commonly used for? The M323.745 gauge pin is used for end‑measure inspection, fixture verification and plug‑fit checks where micrometre accuracy is required. What does a tolerance of ±0.001 mm mean in practice? A tolerance of ±0.001 mm equals one micrometre; the diameter of the pin varies by no more than this amount, providing very tight control for precision fits and calibration references. Which material is the pin made from? The pin is made from special steel, chosen to balance rigidity and routine workshop durability for repeated seating and inspection cycles. What are the exact dimensions of the pin? Nominal diameter 7.45 mm, length 50 mm, weight 0.021 kg; these dimensions make it suitable for compact fixtures and handheld checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.46mm Gauge Pin ±0.001mm, Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy and robust workshop design to streamline end‑dimension checks and fixture set‑up; order the pin directly via Metav Werkzeuge or consult their specialists for application advice. M323.746 gauge pin — 7.46 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The M323.746 is a workshop‑grade gauge pin designed for precise end‑dimension inspection and fixture alignment in precision engineering and toolroom environments. 7.46 mm diameter with ±0.001 mm tolerance 50 mm workshop length for fixture checks Special steel construction for long service life Precision pin suitable for end‑dimension inspection Precision that stabilises quality The core advantage of this gauge pin is its exceptional dimensional control: a diameter of 7.46 mm held to ±0.001 mm. Such a tight tolerance delivers high repeatability in pass/fail checks and comparative measurements, reducing scrap and rework in serial production. Used as a reference element in go/no‑go verification or as a datum for setting up fixtures, the inspection pin provides a measurable improvement in process reliability. The compact mass and precise geometry ensure minimal runout when seated, which translates into faster inspection cycles and more consistent quality documentation. Built for workshop robustness and handling Constructed from special steel and offered in a workshop execution, this pin balances wear resistance with practical handling. At approximately 0.021 kg, the pin is easy to manoeuvre when placing into gauges or bores, while the material choice reduces surface wear in repetitive use. The hardened surface and precise turning maintain the nominal diameter over time, which means fewer replacements and a lower total cost of ownership. For operators, this results in steady tactile feedback during fitting operations and confidence that the reference dimension remains stable under everyday workshop conditions. Applications that speed up inspection workflows This precision pin is aimed at end‑dimension checks, fixture set‑up and comparative inspection tasks where a fixed, exact diameter is required. In production lines it can be used to quickly verify bore diameters, align locating holes and confirm final assembly fits. As a simple, mechanically reliable element, the pin integrates well with bench micrometers, dial gauges and manual gauge fixtures to provide an immediate pass/fail signal without lengthy set‑up or calibration cycles. The result is a reduction in inspection time per part and a smoother flow from machining to quality assurance. For straightforward integration into inspection routines or to confirm suitability for a specific application, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M323.746 GTIN: 4061905059544 Brand: Metav IndustryLine Category: Messstifte Facts Diameter: 7.46 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Material: special steel Workshop execution Single inspection pin Application: end‑dimension checks, fixture alignment FAQ Is the M323.746 supplied with an ISO 17025 certificate? The M323.746 is supplied as a standard workshop gauge; an ISO 17025 accredited certificate is not indicated for this item. What is the primary use of this gauge pin? The gauge pin is intended for end‑dimension inspection and fixture alignment; the M323.746 serves as a reference element for verifying bore sizes and setting locators. What does a tolerance of ±0.001 mm mean in practice? A tolerance of ±0.001 mm indicates a very tight manufacturing allowance; this level of precision ensures minimal variation between pins and high repeatability when used for inspection or as a datum. How should the pin be maintained to preserve accuracy? Keep the pin clean and dry, avoid impact or unnecessary surface contact, and apply a light protective oil if long storage is required; store in a protective container when not in use. Can the pin be used with common workshop gauges and fixtures? Yes — the pin is suitable as a reference for manual comparators, micrometers and bench fixtures used in dimensional checks and set‑up procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.47mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint accuracy, robust workshop design and secure transport packaging for dependable end‑size inspection. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for specification support and rapid supply. Gauge pin M323.747 – Ø 7.47 mm, ±0.001 mm precision (Metav IndustryLine workshop version) A gauge pin M323.747 intended for precise end‑size inspection and positional checking in workshop and inspection environments. Workshop version, robust special steel Diameter 7.47 mm ±0.001 mm tolerance Length 50 mm for reliable end‑measurements Supplied in protective transport case Precision that secures repeatable production quality The Ø 7.47 mm pin is manufactured to a tight ±0.001 mm tolerance, which supports repeatable quality in dimensional inspection and assembly checks. Such a fine tolerance reduces uncertainty when validating nominal sizes or verifying fit relationships, enabling fewer scrapped parts and shorter cycle times in quality control. The numerical tolerance is especially relevant where end‑size verification and high‑precision gauge references are part of the acceptance criteria. Robust design made for everyday workshop use Created as a workshop version, the pin is produced from special steel and finished to retain geometry under regular handling. At 50 mm overall length the pin offers a compact, easy‑to‑manipulate form factor that integrates well with fixture set‑ups and manual inspection benches. Delivery in a protective transport case preserves the measuring surface during storage and transit, ensuring the pin arrives ready for immediate use and minimises downtime associated with replacement or recalibration. Practical applications and smooth inspection integration This test pin is suited to end‑size checks, plug gauges, alignment aids and reference stacking in inspection routines. In practice it simplifies go/no‑go assessments, assists in locating bores or seats and speeds up master‑gauge creation for serial inspection. The precise geometry and workshop‑grade build make the item a compact reference tool in both component sampling and process control, supporting clearer pass/fail decisions and helping maintain consistent assembly tolerances. Contact Metav Werkzeuge for technical selection and delivery options for the Metav IndustryLine gauge pin M323.747; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast dispatch Technical data Article number: M323.747 GTIN: 4061905059551 Weight: 0.021 kg Material: Special steel Length: 50 mm Facts Diameter: 7.47 mm Tolerance: ±0.001 mm Weight: 0.021 kg Type: Workshop version Special features Supplied in protective transport case Designed for end‑size checking and positional inspection Category: Gauge pins / Messstifte Robust workshop execution (Werkstatt‑Ausführung) FAQ What tolerance does the gauge pin offer? The gauge pin M323.747 (Metav IndustryLine) is manufactured to a tolerance of ±0.001 mm, suitable for high‑precision end‑size verification. Is the pin delivered ready for use or does it require preparation? The Metav IndustryLine gauge pin M323.747 is supplied in a protective transport case and arrives ready for immediate use in inspection and fixturing tasks. For which inspection tasks is this pin most suitable? This test pin is ideal for end‑size checks, locating bores and creating master references in manual inspection routines and assembly verification. What materials is the pin compatible with when used as a reference? Built from special steel and designed as a workshop version, the pin serves as a robust reference for dimensional checks across a wide range of component materials and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.48mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of precision to ±0.001 mm, a compact 7.48 mm diameter and a robust 50 mm length for reliable end-measurement checks; combine accuracy and workshop durability for consistent inspection results. Order directly via Metav Werkzeuge or consult our specialists for batch supply and application advice. Metav IndustryLine Gauge Pin M323.748 — 7.48 mm, ±0.001 mm, 50 mm length The gauge pin M323.748 is a single, workshop-grade test pin designed for precise end‑measurements and reference checks in production and inspection environments. Workshop-grade construction Diameter 7.48 mm, tolerance ±0.001 mm 50 mm length for end measurement Made from special steel High-precision measuring for consistent production control A compact, high-stability reference element delivers measurable benefits in everyday inspection routines. With a nominal diameter of 7.48 mm and a tolerance of ±0.001 mm, this test pin supports very tight Go/No‑Go and fit checks where reproducible results are essential. The fine tolerance reduces rework and inspection uncertainty, enabling faster decision-making on the shop floor and improving first-pass yield. Calibrated workflows and repeatable reference measures are easier to maintain when the reference tool itself provides such a narrow deviation band. Durable construction for frequent workshop use Made from special steel and offered in a workshop version, the pin is engineered for repeated contact with mating parts while retaining measurement integrity. The 50 mm solid length provides sufficient engagement for end measurements without excessive flex, and the compact geometry keeps handling straightforward during rapid checks. The combination of material choice and controlled geometry means the pin resists ordinary wear in standard inspection cycles and preserves the contact surfaces that determine measurement accuracy. Traceability and practical integration in quality systems Lightweight and traceable, the component carries a recognisable identifier for inventory and inspection records. The M323.748 single test pin is suitable as a dedicated reference in bench checks, fixture set-ups and short-run quality control. Its small mass supports easy placement in gauging fixtures and manual devices while the clear dimensional specification simplifies documentation and procurement. For supply planning or technical clarification, Metav Werkzeuge can provide order quantities, lead times and compatibility guidance — contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed advice. Choose Metav IndustryLine gauge pins from Metav Werkzeuge for dependable reference measurements and tailored supply solutions — contact our Emmerich team for batch orders and application support Technical data Article number: M323.748 GTIN: 4061905059568 Label: Prüfstift, einzeln, 7,48mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 7.48 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Material: special steel Version: workshop execution Application focus: end measurement Configuration: single test pin FAQ What inspection tasks is this pin best suited for? The gauge pin M323.748 is intended for precise end‑measurement checks, reference gauging and fit verification where a 7.48 mm nominal diameter with ±0.001 mm tolerance is required. Is the material suitable for frequent use in a production environment? Yes, the pin is made from special steel in a workshop‑grade execution, offering durability for routine inspection cycles without compromising the contact geometry. How is the component identified for traceability? Identification is via the article number M323.748 and GTIN 4061905059568, allowing easy recording in quality documentation and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.49mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade precision and a ±0.001 mm tolerance in a compact 50 mm form, supplied ready for safe transport in a protective box; order the pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge Pin M323.749 – 7.49 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge Pin M323.749 is a single, workshop-grade precision pin designed for end-dimension checks, fixture alignment and go/no‑go verification in production and inspection workflows. Workshop-grade design Tolerance ±0.001 mm 50 mm length for fixtures Reduce rejects with sub-micron repeatability High-precision inspection starts with stable reference elements. With a certified ±0.001 mm tolerance, this gauge pin provides a reliable datum for end-dimension checks and small-bore inspections, reducing measurement dispersion and rework. The tight tolerance shortens verification cycles and supports consistent quality outcomes across batches, which in turn improves production throughput and lowers scrap rates. Using a compact, single-pin format simplifies insertion into fixtures and measuring jigs while maintaining the exactness required for fine-tolerance assemblies. Built for workshop handling and durability The pin is manufactured from special steel, chosen for dimensional stability and wear resistance under regular handling. At 50 mm overall length and a nominal 7.49 mm diameter, the geometry is balanced for guided placement in gauges and test fixtures; the modest mass contributes to easy handling during repetitive checks. Delivered in a protective transport box, the component arrives ready for immediate use and secure storage during transfer, preserving its calibrated condition and surface quality between measurements. Traceable identification and straightforward integration Identification is made simple for inventory and process control: the item is registered as M323.749 and carries GTIN 4061905059575, enabling seamless labelling in ERP systems and traceability in inspection records. The single-pin format integrates directly into existing plug gauges, test nests and manual inspection setups without modification. As a Metav IndustryLine product, it benefits from the supplier’s focus on democratising precision and dependable European distribution, supporting continuity of supply for workshops and small series production alike. For reliable, workshop-ready dimensional control choose the Metav IndustryLine M323.749 — contact Metav Werkzeuge in Emmerich for ordering and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.749 GTIN: 4061905059575 Material: Special steel Accuracy: ±0.001 mm Length: 50 mm Diameter: 7.49 mm Weight: 0.021 kg Packaging: Transport box Facts Diameter: 7.49 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features Workshop version Single gauge pin Special steel construction Protective transport box Category: Gauge pins FAQ What tolerance can be expected for this gauge pin? The gauge pin M323.749 is specified to ±0.001 mm, providing high repeatability for end-dimension checks and precision fixtures. Is the pin suitable for repeated fixture use in a production environment? Yes, the M323.749 is a workshop-grade pin made from special steel, designed for regular handling and integration into gauges and test nests. How is the item delivered to protect its precision? The pin is supplied in a protective transport box to preserve surface condition and dimensional integrity during storage and shipment. Can this pin be used for alignment and go/no‑go checks? The single-pin format is appropriate for alignment tasks, go/no‑go verification and insertion into manual test fixtures as part of process control. How can the product be identified within procurement or inventory systems? Use SKU M323.749 and GTIN 4061905059575 for unambiguous identification and ERP integration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.4mm Test Pin, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of 7.40 mm nominal diameter, ±0.001 mm tolerance and a robust 50 mm length for consistent end‑measure checks in production and inspection. The workshop‑grade construction and delivery in a transport case ensure safe handling and immediate usability — order the gauge pin directly via Metav Werkzeuge or consult our specialists if required. Gauge pin M323.740 — single precision checking pin, 7.40 mm, ±0.001 mm (Metav IndustryLine) The Gauge pin M323.740 is a single, high‑accuracy checking pin designed for fit verification and end‑measure inspections in workshop and quality‑control environments. Workshop version for rugged use Diameter 7.40 mm with ±0.001 mm tolerance Length 50 mm for repeatable checks Delivered in a transport case Consistent dimensional control for series production The solid checking pin provides a dependable reference point for frequent plug and fit tests. With a 7.40 mm nominal diameter and a tight ±0.001 mm tolerance, the pin reduces uncertainty in go/no‑go assessments and assembly trials. This level of repeatability shortens inspection cycles and helps avoid downstream rework by establishing a clear, measurable datum for mating parts and gauges. Durable construction that withstands workshop use Manufactured from Spezial‑Stahl, the pin is finished to resist wear during regular handling and insertion. The 50 mm length offers comfortable engagement depth for standard fixtures while keeping the pin easy to position by hand or within test rigs. The workshop specification balances toughness and surface integrity so that dimensional stability is retained across numerous inspection cycles. Practical benefits for inspection and tooling workflows Delivered in a protective transport case, the pin is ready for relocation between bench, jig and portable verification stations without loss of calibration condition. Using a defined nominal pin instead of improvised probes simplifies documentation, shortens tool change times and supports systematic quality routines. The compact single‑pin format is space‑efficient and integrates smoothly into existing inspection kits and fixture setups. Contact Metav Werkzeuge today for sourcing and sample checks of the Metav IndustryLine gauge pins and to ensure the right inspection tools reach the workshop without delay Technical data Article number: M323.740 GTIN: 4061905061165 Brand: Metav IndustryLine Numbers / Core technical data Nominal diameter: 7.40 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.021 kg Special features / Versions Material: Spezial‑Stahl Version: Workshop execution Delivery: Transport case for safe handling Application: End‑measure and fit verification FAQ What is the nominal diameter and tolerance of the pin? The gauge pin M323.740 has a nominal diameter of 7.40 mm and a tolerance of ±0.001 mm suitable for precise fit checks. Which material is used for the checking pin? The checking pin is made from Spezial‑Stahl, chosen for wear resistance and dimensional stability in workshop environments. Is the pin suitable for repeated insertion and removal? Yes, the workshop execution of the M323.740 is designed for frequent handling and is supplied in a transport case to protect the surface finish. Can the pin be used as a reference for fixture set‑up? The M323.740 serves well as a reference datum for fixtures and assembly jigs thanks to its tight tolerance and consistent geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com