Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
7.5-15mm Radius Gauge Set Concave And Convex Leaves, Werk Standard - Metav IndustryLine
Take advantage of precise profile verification, a practical 7.5–15.0 mm measurement range and robust carbon steel construction to speed up routine inspections. Order the set directly via Metav Werkzeuge or consult the team for application advice. Metav IndustryLine Radius gauge set M318.006 — 7.5–15.0 mm, concave & convex The Radius gauge set M318.006 is a compact verification aid for fast comparison of small radii on workpieces, jigs and finished edges in workshop and inspection environments. Concave and convex profiles for versatile checks Measurement range 7.5–15.0 mm Robust carbon steel construction Rapid tactile profile verification Fast, reliable profile checks for small radii The set supports immediate visual and tactile comparison to control edge radii without lengthy set-ups. By matching a workpiece to the appropriate concave or convex leaf, users achieve repeatable results for small radii from 7.5–15.0 mm, reducing inspection time and limiting rework. This method is particularly efficient where a simple go/no-go decision is required: the calibrated profile either seats cleanly or it does not. The compact design and rigid leaves ensure consistent contact and a dependable reference for quick quality checks. Built for routine workshop use with solid materials Manufactured from carbon steel, the leaves withstand frequent handling and contact with machined edges while maintaining profile integrity. The material choice balances durability and cost-effectiveness for everyday use in toolrooms and production inspection stations. Where a robust physical reference is needed for quick checks during set-up or final inspection, the sturdy construction delivers long service life and consistent precision under normal workshop conditions. Easy to integrate into existing inspection routines Delivered to a factory standard, the set is intended for straightforward inclusion in quality-control workflows. The collection of shaped leaves covers incrementally spaced radii for systematic sampling across a component’s edges and transitions. Used alongside calipers or optical checks, the gauges offer a fast first-pass assessment that saves time and resources. For specialised applications or integration into a formal inspection plan, Metav Werkzeuge provides further specification support and advice to align the tool with existing procedures. For ordering, specification queries or application guidance for the Metav IndustryLine radius gauge set, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for prompt expert assistance Technical data SKU: M318.006 GTIN: 4054469127613 ECLASS: 21170203 Standard: factory standard Facts Measurement range: 7.5–15.0 mm Range min: 7.5 mm Range max: 15.0 mm Tariff number: 90173000 Special features Profiles: concave and convex gauges Material: carbon steel Application: quick profile verification in workshop and inspection FAQ How is the set used to check radii on a component? The leaves are placed against the edge or profile; a correct match shows full contact. The radius gauge set M318.006 allows rapid go/no-go checks without complex set-up. What measurement range does the set cover? The collection spans a 7.5–15.0 mm range to inspect small radii typically found on machined parts, tool edges and formed components. What material are the gauges made from and what does that mean for use? Leaves are fabricated from carbon steel, offering robust contact performance for routine inspection tasks while providing long-term profile stability under normal workshop conditions. Is the set suitable for precision inspection in a quality department? The set serves as a fast comparative reference under the factory standard and is ideal for initial verification and process control; for traceable metrological records, complement the set with calibrated measuring equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.51mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the high metrological accuracy and robust workshop design to secure repeatable end measurements: a 7.51 mm diameter pin with ±0.001 mm tolerance and a 50 mm usable length for reliable reference checks. Order directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.751 — precision 7.51 mm plug gauge, ±0.001 mm tolerance A gauge pin M323.751 designed for precise end measurements and reference checks in workshop and inspection environments, combining micrometre-level accuracy with a compact 50 mm length. Workshop execution for daily industrial use Diameter 7.51 mm with ±0.001 mm tolerance 50 mm special steel pin Supplied in transport case for safe handling Precision that reduces measurement uncertainty The solid reference pin provides a ±0.001 mm tolerance (equivalent to 1 µm), enabling tight dimensional control in inspection and assembly operations. Such accuracy supports reproducible pass/fail decisions and reduces rework by establishing a reliable physical benchmark. The small form factor keeps thermal mass low, which assists dimensional stability during short measurement sequences, while the 7.51 mm diameter matches common nominal sizes used for end‑dimension verification. Robust design for everyday workshop handling Built as a workshop version, the pin is manufactured from special steel to withstand repeated handling and fixture contact without compromising the reference surface. The 50 mm usable length balances reach and rigidity, and the component’s low mass (0.022 kg) makes positioning and alignment straightforward during frequent checks. Supplied in a transport case, the pin arrives protected against transit damage and contamination, ensuring the reference surface remains ready for immediate use. Practical application and compatibility This single testing pin is suitable for end‑measurement tasks, plug checks and dimensional verification where a rigid, calibrated reference is required. The compact gauge is convenient for bench inspection, fixture validation and comparative checks against bore, shaft or mating components. The simple geometry eases cleaning and handling; when integrated into routine inspection workflows, the pin contributes to faster decision cycles and stable quality documentation. Contact Metav Werkzeuge today for tailored advice on the Metav IndustryLine gauge pin and to confirm suitability for specific inspection tasks in your workshop. Technical data Article number: M323.751 GTIN: 4061905059599 Manufacturer: Metav IndustryLine Description: Gauge pin, single, 7.51 mm, ±0.001 mm, length 50 mm Facts Diameter: 7.51 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Workshop execution Material: special steel Supplied in transport case Single testing pin for end measurements FAQ What level of precision does this gauge pin offer? The gauge pin provides a tolerance of ±0.001 mm, giving micrometre‑level accuracy suitable for tight inspection limits on the Metav IndustryLine plug gauge M323.751. For which tasks is this pin most suitable? This single reference pin is intended for end measurements, plug checks and dimensional verification where a rigid, calibrated reference is required. Is the pin supplied ready for immediate use? Yes, the Metav IndustryLine gauge pin is delivered as an individual pin in a protective transport case to preserve the reference surface for immediate use. What material is used for the pin? The testing pin is made from special steel, selected for wear resistance and stability in workshop environments. How compact is the gauge pin for handling and fixtures? With a usable length of 50 mm and a mass of 0.022 kg, the pin is compact and easy to position in fixtures and inspection jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.52mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of ±0.001 mm repeatability, a 7.52 mm nominal diameter and robust workshop construction for consistent end‑dimension checks; the pin is supplied in a protective transport case and can be ordered directly via Metav Werkzeuge or discussed with our consultants for integration into inspection routines. Gauge pin M323.752 – Single test pin, 7.52 mm diameter, ±0.001 mm The gauge pin M323.752 is a workshop‑grade precision test pin intended for end‑dimension verification, fixture set‑up and go/no‑go checks in production and quality control environments. ±0.001 mm tolerance 7.52 mm diameter precision Workshop‑grade special steel Delivered in transport case Precise, reproducible inspection without compromise A compact inspection tool designed for measurement tasks that demand micrometre‑level certainty. The gauge pin’s ±0.001 mm tolerance corresponds to a one‑micrometre repeatability band, making it suitable where narrow tolerances are enforced in final dimensions. The 7.52 mm nominal diameter and the specified 50 mm overall length provide a reliable datum for validating bores, plug gauges and assembly fits. By converting the raw dimensional specification into a stable reference, the test pin reduces measurement variability and supports faster decision‑making in the metrology chain. Built for daily workshop use with protected handling The workshop execution emphasises durability and ease of handling: manufactured from special steel, the pin balances wear resistance with dimensional stability under routine use. Delivery in a protective transport case prevents nicks and contamination during storage and transport, preserving the polished measuring surface and prolonging service life. The lightweight construction (approx. 0.022 kg) simplifies manual handling and inspection cycles while maintaining the rigidity needed for consistent contact geometry. Practical application in quality control and fixture set‑up This single test pin functions as a quick reference for end‑dimension checks, alignment tasks and assembly verification. In practice, the component serves as a simple gauge for verifying bore sizes, checking plug fits and establishing datum points on jigs and fixtures. The workshop specification makes it particularly suitable for on‑machine quick checks and incoming inspection stations where robust, repeatable references are required. Traceable identification via SKU supports inventory and quality documentation for production records. For supply, technical integration or bespoke batch requirements, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.752 GTIN: 4061905059605 Weight: 0.022 kg Material: Special steel Packaging: Transport case included Facts Nominal diameter: 7.52 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Special features Workshop execution Single test pin for end‑dimension checks Category: Gauge pins FAQ What is the intended use of this test pin? The gauge pin M323.752 is intended for end‑dimension verification, fixture alignment and quick go/no‑go checks in production and inspection workflows. How precise is the diameter of the pin? The nominal diameter is 7.52 mm with an accuracy of ±0.001 mm, providing micrometre‑level reproducibility for critical checks. Is the pin suitable for daily workshop handling? Yes, the workshop‑grade construction and special steel material make the pin robust for routine use; it is supplied in a transport case to protect the measuring surfaces. Can this pin be used for checking bore fits and plug gauges? The M323.752 is well suited to verifying bore sizes and plug fits, serving as a stable reference for assembly and incoming inspection tasks. How is the pin identified for inventory and traceability? Identification is via the article number M323.752 and GTIN 4061905059605, which can be recorded in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.53mm Test Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, micron accuracy (±0.001 mm) and a compact 50 mm length for consistent end‑dimension verification; order the gauge pin directly via Metav Werkzeuge or consult our product advisors for application support. Gauge pin M323.753 — gauge pin with 7.53 mm diameter, ±0.001 mm tolerance (50 mm length) Gauge pin M323.753 is a workshop‑grade inspection pin designed for precise end‑measure checks and routine dimensional verification in inspection benches and jigs. Workshop version, robust design Diameter 7.53 mm with ±0.001 mm tolerance 50 mm length for end‑dimension checks Made from special steel Supplied in a transport case Consistent dimensional control through micron accuracy The core benefit of this inspection pin is its ±0.001 mm accuracy, which establishes a reliable reference for end‑measurement routines and small‑part inspection. With a nominal diameter of 7.53 mm, the pin serves as a fixed gauge for go/no‑go checks and comparative measurements, reducing measurement uncertainty in repetitive tasks. The tight tolerance supports processes where high repeatability is essential, such as assembly checks and final inspection of turned or ground components, and helps to shorten inspection cycles by providing an immediately usable reference. Durable construction for workshop environments Produced in a workshop version and manufactured from special steel, the pin resists wear and preserves its form under regular handling. The 50 mm length provides an ergonomic balance between reach and rigidity so that the pin remains stable during insertion and extraction operations. The material choice and compact geometry contribute to high repeatability over many cycles, lowering the need for frequent replacements and ensuring stable measurement baselines in busy production settings. Practical handling, transport and application focus Delivery in a secure transport case protects the gauge during storage and shipment, ensuring the measuring face remains undamaged until use. At just 0.022 kg the pin is light to handle yet solid in feel, simplifying use in fixture set‑ups and handheld inspection tasks. Intended primarily for end‑dimension verification and final size checks (end masses), the pin supports quick comparative control routines in workshops and inspection areas where speed and traceability of results are required. For reliable end‑measurement and workshop‑grade verification with the Metav IndustryLine M323.753 gauge pin, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.753 GTIN: 4061905060441 Eclass: 21170231 Facts Diameter: 7.53 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Workshop version Material: special steel Supplied in transport case Suitable for end‑dimension verification FAQ What tolerance does the gauge pin offer? The gauge pin provides an accuracy of ±0.001 mm, suitable for fine workshop inspection tasks and repeatable end‑dimension checks. Which material is the inspection pin made from? The inspection pin is made from special steel, selected for wear resistance and stable dimensional behaviour during routine use. Is the gauge pin delivered ready for use and protected? Yes, the pin is supplied in a transport case to protect the measuring faces during storage and transport. What applications suit this diameter and length? The 7.53 mm diameter and 50 mm length are optimised for end‑measurement checks, fixture setup and small‑part inspection where compact, rigid references are required. Can the pin be used for production go/no‑go checks? The pin’s tight tolerance and robust construction make it suitable as a reference in go/no‑go and comparative production checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.54mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometric tolerance, robust special-steel construction, and compact 50 mm length for repeatable end-measure checks in workshop and production environments; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.754 — single workshop test pin, Ø 7.54 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.754 is a single, workshop-grade precision pin designed for end-measure verification and fit testing in mechanical production and inspection tasks. Workshop-grade execution Diameter 7.54 mm precision Tolerance ±0.001 mm Length 50 mm special steel Precise tolerances for consistent quality control The hallmark of this precision component is its tolerance of ±0.001 mm, equivalent to 1 µm, which makes the pin suitable where tight dimensional conformity is required. Such a narrow tolerance reduces uncertainty in pass/fail checks and supports reliable repeatability on gauges, fixtures and inspection benches. By choosing a test pin with this level of accuracy, measurement processes benefit from lower rework rates and clearer go/no‑go decisions, contributing directly to production efficiency and traceable quality control. Robust material and workshop-ready design Manufactured from special steel and issued as a workshop execution, the pin combines durability with the handling characteristics needed in everyday inspection routines. The 50 mm length provides sufficient engagement for end measurements without excess overhang, while the hardened steel resists wear from repeated insertion and contact. Supplied as a single item and protected for transport, the component is ready for immediate use in assembly jigs, plug gauges or as a reference mandrel in routine checks. Practical applications and integration into workflows This precision pin serves in end-measure verification, fit testing of bores and shafts, and as a reference element in assembly jigs where dimensional stability is critical. The compact geometry and high concentricity make it suitable for serial spot checks on production lines as well as for laboratory bench work when small parts require exact mating dimensions. For buyers seeking a reliable component from a recognised supplier, the Metav IndustryLine designation signals a combination of practical workshop suitability and industrial consistency. Request the Metav IndustryLine gauge pin via Metav Werkzeuge for dependable end-measure verification or consult our specialists in Emmerich for tailored recommendations and integration guidance Technical data Article number: M323.754 GTIN: 4061905060458 SKU: M323.754 Label: Prüfstift, einzeln, 7,54mm, +/- 0.001 mm Länge 50 mm Numbers Diameter: 7.54 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Material: special steel Workshop-grade execution Supplied single for end-measure tasks Application trigger: end measurements FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.754 is produced to a tolerance of ±0.001 mm, ensuring micrometric precision for end-measure checks. Which material is used for the pin? The test pin is made from special steel, chosen for wear resistance and dimensional stability under workshop conditions. What applications suit this test pin? Typical uses include end-measure verification, bore and shaft fit testing, and use as a reference mandrel in inspection and assembly fixtures with the Metav IndustryLine gauge pin M323.754. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.55mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Reliable workshop-grade performance paired with an ultra‑fine ±0.001 mm tolerance and a compact 7.55 mm diameter provides repeatable end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for precise selection and supply. M323.755 Gauge Pin (Metav IndustryLine) — 7.55 mm, ±0.001 mm, 50 mm length The M323.755 gauge pin is a workshop‑grade precision pin for end‑dimension verification, fixture referencing and tight‑tolerance assembly checks Workshop-grade tolerance ±0.001 mm 7.55 mm diameter for end-dimension checks 50 mm special-steel length for stable referencing Supplied individually for precision fits Measurement reliability for final inspections A compact reference element with an accuracy of ±0.001 mm reduces ambiguity in go/no‑go assessments and supports reproducible measurement results. The fine 7.55 mm nominal diameter is well suited to end‑dimension verification where small clearances and assembly fits determine acceptance. By providing a clearly defined reference feature, the pin simplifies decision thresholds in quality procedures and shortens inspection cycles without adding complex instrumentation. Durable form and handling benefits Manufactured in special steel and offered as a workshop‑grade component, the pin’s 50 mm length balances reach with rigidity so measurements remain stable across repeated use. Supplied individually, the element is straightforward to integrate into existing gauge sets, jigs or fixture components. The low mass facilitates easy manual positioning and minimises dynamic disturbance during placement, helping to keep repeatability high in routine bench checks. Where such a pin adds value in production This gauge pin is designed for tasks such as final acceptance checks, fixture set‑up and batch sampling where end dimensions are critical. Using a dedicated reference element streamlines manual and semi‑automated workflows by offering a fixed datum for mechanical referencing. The compact design makes storage and inventorying simple while enabling quick, comparable checks across production batches and maintenance intervals. For robust workshop measurement and tight end‑dimension control, request Metav IndustryLine's M323.755 through Metav Werkzeuge for expert selection and reliable supply from Emmerich. Technical data Article number: M323.755 GTIN: 4061905060465 Manufacturer: Metav IndustryLine Facts Diameter: 7.55 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg eClass: 21170231 Special features Material: Special steel Workshop execution Supplied individually Intended for end‑dimension verification FAQ What tolerance does the gauge pin offer? The M323.755 gauge pin is manufactured to a tolerance of ±0.001 mm, making it suitable for very fine end‑dimension inspections. Which material is used for this pin? The M323.755 is made from special steel, selected for dimensional stability and workshop use. What are the primary applications for this type of pin? This gauge pin is intended for final acceptance checks, fixture referencing and repeatable measurement tasks where end dimensions are decisive. Is the pin supplied as part of a set or individually? The product is supplied individually to allow selective inclusion in gauge sets or bespoke fixture builds. What are the physical dimensions of the pin? The M323.755 has a nominal diameter of 7.55 mm and a length of 50 mm Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.56mm Gauge Pin ±0.001 mm Length 50 mm Workshop Finish - Metav IndustryLine
Take advantage of ±0.001 mm tolerance, compact 7.56 mm diameter and a 50 mm length for reliable end‑measurement and repeatable inspection routines; the robust special steel construction supports daily shop‑floor use. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.756 – precision test pin, 7.56 mm, ±0.001 mm Gauge pin M323.756 is a precision test pin for fine dimensional checks and end‑measurement tasks in metrology and quality control. Precision tolerance ±0.001 mm Diameter 7.56 mm, length 50 mm Made from special steel Workshop version, robust design Ensure consistent dimensional control on the shop floor A compact, accurately sized test pin like this one provides a straightforward way to verify bores, fixture seats and reference features. The ±0.001 mm tolerance reduces uncertainty in routine checks, which translates into fewer setup errors and less scrap during production. Because the pin presents a measured, stable reference diameter of 7.56 mm, laboratory and workshop staff gain a reliable datum for comparative measurements and quick go/no‑go checks. Built for repeatable use under workshop conditions Constructed in special steel, the pin is intended for frequent handling and inspection cycles. The 50 mm length offers enough engagement for many typical bore depths while remaining compact for easy positioning in gauges or fixtures. The workshop execution emphasises durability and practical handling, meaning the tool withstands the knocks and repeated insertions common in busy production environments without compromising dimensional integrity. Reduce inspection time and improve process capability Using a dedicated test pin with a defined tolerance simplifies inspection steps: measuring tasks can be standardised, documented and repeated with confidence. The precise diameter and close tolerance help to shorten decision time when assessing components, supporting faster quality gates and less downtime between operations. This rational gain in efficiency is particularly valuable where traceable dimensional control influences downstream assembly or machining accuracy. Integration into quality routines and documentation The single‑piece design suits use as a control master, a fixture reference or as an end‑measurement gauge for small diameters. Its clear specification—7.56 mm, 50 mm, ±0.001 mm—makes it straightforward to include in inspection protocols and technical documentation. For organisations that value reproducible results, adding this test pin to a set of reference tools helps maintain consistent measurement practices across shifts and operators. Discuss measurement integration and sourcing with Metav Werkzeuge to ensure the M323.756 fits the intended inspection workflow Technical data Article number: M323.756 GTIN: 4061905060472 Brand: Metav IndustryLine Core specifications Diameter: 7.56 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg Materials & features Material: Special steel Version: Workshop execution Intended use: End‑measurement / inspection FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.756 is specified with a tolerance of ±0.001 mm for precise dimensional checks. Which diameter and length does the test pin provide? The test pin offers a nominal diameter of 7.56 mm and a length of 50 mm for common bore and fixture measurements. Is the pin suitable for daily workshop use? Yes, the workshop execution and special steel construction make the M323.756 suitable for frequent inspection cycles and routine handling. How is the gauge pin typically used in quality control? It is used as a reference for end‑measurement, quick go/no‑go checks and to document dimensional conformity in inspection protocols. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.57mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precision, extremely tight tolerance ±0.001 mm and a durable special steel finish for reliable end-measurement references and repeatable fixture inspection. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Inspection pin M323.757 – 7.57 mm Ø, ±0.001 mm tolerance, workshop-grade The inspection pin M323.757 is a single, workshop-grade probe pin designed for use as a dimensional reference or gauge element in fixtures and verification rigs Workshop-grade construction for robust use Diameter 7.57 mm with ±0.001 mm accuracy Length 50 mm for deep reference points Supplied in a transport case for safe handling High-precision reference that reduces rework and inspection time The pin offers a diameter of 7.57 mm with an exceptional tolerance of ±0.001 mm, making it suitable where narrow dimensional windows determine part acceptance. Such a tight tolerance means the element functions as a dependable datum or reference in repeat gauging and fixture checks, reducing variability introduced by worn or imprecise pins. By using a fixed, hardened probe element with verified geometry, measurement cycles become more predictable and non-conforming parts can be identified earlier, supporting faster corrective action and less downstream rework. The engineered accuracy translates directly into time and cost savings in quality control processes. Durable workshop design for everyday industrial use Manufactured in special steel and issued as a workshop-grade component, this probe pin tolerates frequent handling and the mechanical stresses typical of production environments. The 50 mm length provides access to recessed features while maintaining sufficient stiffness for contact stability; the balance between reach and rigidity reduces deflection during probing. Supplied in a protective transport case, the element is kept secure in transit and storage, prolonging service life and preserving the calibrated geometry. The robust finish eases maintenance intervals and ensures the pin remains a reliable part of the inspection toolkit over multiple production runs. Practical integration into gauges, fixtures and measurement benches As a single probe element, the component readily integrates into existing gauge sets, sliding jigs or fixed fixtures where a precise dimensional reference is required. The compact mass and consistent diameter make it suitable as a replacement pin or a standardised datum across multiple stations, improving interchangeability and simplifying inventory. Its geometry is ideal for end-measurement tasks and fits common locating holes and bushings used in bench fixtures. The clear specification of diameter, length and tolerance facilitates comparison against bespoke requirements and helps maintenance planners choose the correct spare without ambiguity. Contact Metav Werkzeuge in Emmerich to specify quantities, confirm compatibility with existing gauges or request tailored batch production for workshop use – Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; info@metav-werkzeuge.com; +49 2822 7131930 Technical data Article number: M323.757 GTIN: 4061905060489 Manufacturer: Metav IndustryLine Facts Diameter: 7.57 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Workshop-grade execution Material: Special steel Single probe pin for dimensional reference Supplied in transport case Category: Gauge pins FAQ What is the measurement tolerance of this gauge pin? The inspection pin is specified with a tolerance of ±0.001 mm, suitable for high-precision reference tasks. Is the pin suitable for use in production fixtures and jigs? Yes, the workshop-grade design and special steel construction make the pin appropriate for repeated use in production fixtures and gauge assemblies. What is the usable length and access capability of the pin? The pin has a length of 50 mm, offering reach into recessed features while maintaining stiffness for stable contact. Can this element be used as a replacement pin across multiple stations? The defined diameter of 7.57 mm and tight tolerance support interchangeability as a standard reference element in multi-station setups. Does the product include protective packaging for transport? The probe pin is supplied in a transport case to protect the geometry and surface finish during transit and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.58mm Gauge Pin, Workshop Version, ±0.001 mm, Length 50 mm - Metav IndustryLine
Take advantage of the combination of sub‑micron repeatability, durable special steel construction and a compact 50 mm length to streamline inspection and reduce rework. Order the gauge pin directly via Metav Werkzeuge or request expert advice from the Metav team for application support and procurement. Gauge pin M323.758 — Precision gauge pin 7.58 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.758 is a single precision pin intended for accurate diameter and end‑dimension checks in workshop and inspection environments Workshop execution for robust handling Diameter 7.58 mm with ±0.001 mm tolerance Special steel for high wear resistance Compact length 50 mm for standard fixtures Accuracy that reduces rework and inspection uncertainty The primary advantage of this precision pin is its measurement certainty: a nominal diameter of 7.58 mm held to ±0.001 mm (1 µm) minimises ambiguity when verifying bores or end measures. Such a tight tolerance translates directly into fewer downstream adjustments and lower scrap rates, because inspection decisions are based on a clearly defined reference. In production environments where small deviations trigger costly rework, this level of control supports faster batch release and consistent part quality. Built for daily workshop use and repeatable handling Presented in a workshop version, the pin combines practical dimensions with a resilient construction. The special steel body gives improved resistance to wear compared with standard steels, sustaining dimensional stability under frequent use. With a length of 50 mm and a mass of 0.022 kg, the pin is easy to position in fixtures and handheld checks without undue flexing, so handling is quick and repeatable — an efficiency gain in routine quality tasks. Integrating into inspection routines and fixtures This precision pin is suitable as a reference mandrel for final dimension checks, plug‑type inspections and manual gauging tasks. Traceability is supported through the product identifiers M323.758 and GTIN 4061905060496, which simplify inventory and quality record keeping. Using a dedicated reference pin like this reduces measurement chain complexity: calibrated reference diameters cut the need for repeated comparative checks and make documentation of conformity more straightforward. Reliable sourcing and practical benefits for industry Sourcing from a partner with a strict quality filter ensures consistent supply and documented provenance. The Metav IndustryLine execution reflects a focus on workshop suitability and dependable repeatability, helping maintenance and inspection staff to standardise checks across shifts. Where production throughput depends on rapid, unambiguous verification of bore sizes or end measurements, a high‑precision reference pin supports both operational pace and auditability. Contact Metav Werkzeuge for purchasing and specification support on the Metav IndustryLine gauge pin M323.758 with ±0.001 mm tolerance — technical consultants are available via info@metav-werkzeuge.com or by phone to discuss fitment and batch requirements. Technical data Article number: M323.758 GTIN: 4061905060496 Manufacturer: Metav IndustryLine Facts Diameter: 7.58 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Workshop execution Material: special steel Category: gauge pins FAQ What is the exact tolerance of the gauge pin? The Metav IndustryLine gauge pin M323.758 is specified to ±0.001 mm, providing 1 µm positional certainty for precise diameter checks. For which tasks is this precision pin intended? This precision pin is designed for final diameter verification, plug‑type inspections and end‑dimension checks in workshop and inspection settings. Which material is used for the pin? The pin is manufactured from special steel, chosen for improved wear resistance during repetitive gauging operations. How is traceability handled for this component? Traceability is supported via the product code M323.758 and GTIN 4061905060496, facilitating inventory control and quality records. Is this pin suitable for automated fixtures? Yes — the compact geometry and stable tolerance make the pin usable as a reference element in standard fixtures and manual or semi‑automated inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.59mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a 7.59 mm nominal diameter and a compact 50 mm length to ensure reproducible end‑dimension checks and faster go/no‑go decisions on the shop floor; order directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin M323.759 – Metav IndustryLine, 7.59 mm, ±0.001 mm, 50 mm length A precision single gauge pin M323.759 designed for reliable end‑dimension inspection and plug‑checking in workshop environments. High precision ±0.001 mm tolerance Diameter 7.59 mm nominal Length 50 mm for end‑dimension checks Workshop version in special steel Reliable inspection that reduces rework and scrap The tight ±0.001 mm tolerance of this test pin provides a measurable improvement in inspection certainty compared with coarse gauges. By using a hard, dimensionally stable measuring pin with a defined 7.59 mm nominal diameter and 50 mm usable length, quality checks become repeatable and less prone to operator variation. This results in fewer false rejects, reduced rework and a clearer statistical picture of process capability. The numerical specification is suitable for fine mechanical end‑dimension control where small deviations can cause assembly issues. Durable material and workshop fit for everyday use Constructed from special steel, the pin delivers wear resistance and surface stability under repeated contact. The compact 50 mm shank is optimised for confined fixturing and quick plug‑in checks, while the workshop execution ensures robust handling in standard production environments. The material choice balances hardness with machinability so that the gauge retains its accuracy over many cycles; where appropriate, compatibility with cleaning fluids and light protective storage will extend service life. Practical application and integration in inspection routines As a single‑item gauge pin, this measuring pin is intended for direct plug‑checks, end‑dimension verification and reference seating in jigs. Its nominal size and tight tolerance make it ideal as a master reference when calibrating assembly fixtures or when verifying bore sizes during first‑article inspections. The simple geometry minimises alignment effort and accelerates throughput in batch checks. For traceable workflows, integrate this pin within established inspection plans and log measured deviations to support process improvements. Choose the Metav IndustryLine gauge pin M323.759 for consistent end‑dimension verification — contact Metav Werkzeuge in Emmerich for ordering or technical consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.759 GTIN: 4061905061059 Manufacturer: Metav IndustryLine Facts Diameter: 7.59 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Material: special steel Version: workshop execution Category: gauge pin (Messstifte) Typical use: end‑dimension checks / plug checking FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑dimension inspection and plug‑type checks, providing a quick go/no‑go reference for bores and seating features. How tight is the accuracy and what does it mean in practice? With an accuracy of ±0.001 mm, the pin gives high‑precision confirmation of nominal size, suitable for fine mechanical inspection where micrometre‑level control is required. Is the pin suitable for repeated shop floor use? Yes, the special steel construction and workshop execution are chosen for durable, repeated contact in production environments. Can this pin be used as a master reference in fixtures? The 50 mm length and stable diameter make it suitable as a master seating reference in fixturing and first‑article checks. How should the gauge pin be handled to maintain accuracy? Handle with care, keep contact faces clean and store in a protective location when not in use to retain dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.5mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop‑ready robustness and laboratory‑level accuracy: the precision pin combines a 7.50 mm nominal diameter with an ultra‑tight ±0.001 mm tolerance and a 50 mm usable length to ensure repeatable end‑measure verification. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Gauge pin M323.750 — 7.50 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.750 for precision end‑measurements, designed as a workshop‑grade tool for fixture checks and dimensional verification. Workshop-grade gauge pin 7.50 mm diameter High precision ±0.001 mm tolerance Hardened special steel for durability Length 50 mm for fixture verification Consistent inspection through micro‑tight tolerance A tolerance of ±0.001 mm delivers measurably improved repeatability compared with typical workshop pins, reducing uncertainty in go/no‑go checks and end‑measure verification. This level of precision shortens corrective loops in production and supports faster decision‑making during quality control. The fine tolerance is particularly effective where small deviations have disproportionate effects on assembly fit or functional performance. Durable construction for daily workshop use Constructed from special steel and finished for a workshop‑grade service life, the pin resists wear from repeated seating and probing. The robust material choice minimises surface damage and prolongs nominal service intervals, which in turn lowers total cost of ownership through fewer replacements. The compact design also tolerates routine handling without compromising measuring integrity. Compact dimensions that simplify set‑up and checking With a nominal 7.50 mm diameter and a 50 mm length, this precision pin is sized to support end‑measure tasks, alignment checks and fixture validation without adding unnecessary bulk. The modest weight and slim profile allow easy positioning in small bores or assemblies, helping to reduce set‑up time and enabling quicker, more reliable measurements on the shop floor. Practical benefits for production and inspection workflows As a single‑piece gauge for end dimensions, the component improves throughput by streamlining pass/fail assessments and reducing the need for secondary verification. Clear identification and a compact footprint make it suitable for inclusion in inspection kits or as a reference element on test benches, supporting consistent quality in batch production and one‑off checks alike. For procurement or to discuss how the Metav IndustryLine gauge pin M323.750 can be integrated into existing inspection procedures, contact Metav Werkzeuge and speak with our consultants for a tailored recommendation. Technical data Article number: M323.750 GTIN: 4061905059582 Manufacturer: Metav IndustryLine Dimensions & accuracy Nominal diameter: 7.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg Materials & features Material: special steel Design: workshop execution Category: gauge pins Application: end‑measure verification FAQ What is the manufacturing tolerance of this pin? The gauge pin M323.750 is manufactured to a tolerance of ±0.001 mm, suitable for fine end‑measurements and high‑repeatability checks. Which material is the pin made from? This Metav IndustryLine pin is made from special steel, specified for durability in everyday workshop inspection tasks. What are the pin's main dimensions? The pin has a nominal diameter of 7.50 mm and a usable length of 50 mm, weight approximately 0.022 kg. How is the pin typically used in the workshop? The precision pin is intended for end‑measure verification, fixture checks and alignment tasks where a compact, stable reference is required. Is this pin suitable for inclusion in inspection kits? Yes, the compact size and tight tolerance make the M323.750 well suited for inspection kits and reference benches in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.61mm Gauge Pin Precision ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of industrial‑grade precision, a slim 7.61 mm diameter and a solid 50 mm length for reproducible end‑dimension checks in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult the sales team for application advice. Precision gauge pin M323.761 — 7.61 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A Precision gauge pin M323.761 for accurate end‑dimension verification and fixture set‑up in workshop and small‑series inspection tasks. High accuracy ±0.001 mm 7.61 mm diameter for end‑dimension checks 50 mm overall length for secure handling Workshop version with transport case Reduce rework through measured certainty The Precision gauge pin M323.761 provides a tight ±0.001 mm tolerance that supports reliable go/no‑go and reference checks at the machine or bench. The declared accuracy allows quality technicians and fitters to make clear pass/fail decisions, reducing repeat machining and scrap. In practical terms, the marked tolerance stabilises assembly checks and makes first‑article inspection faster, because fewer secondary measurements are required when a defined standard pin is used as the reference. Robust geometry for daily workshop handling Constructed from special steel and finished in a workshop version, the pin balances wear resistance with manageable mass for routine use. The 50 mm overall length gives a comfortable grip and resilient clamping into fixtures without compromising straightness over the working span. A compact mass of 0.022 kg contributes to low inertia during handling while the supplied transport case protects the measuring face during storage and transfer, so the tool stays ready for immediate use and keeps service intervals low. Integrates with inspection and assembly workflows As a single‑piece reference for end‑dimension checks, this pin streamlines bench routines and fixture set‑ups within production control. The 7.61 mm diameter matches specific bore and shaft checks, supporting quick verification of assembly fits and enabling tighter process control when used alongside callipers or dial gauges. Documented dimensioning and repeatable use help to reduce measurement variability and accelerate in‑process decisions, supporting a steadier production flow and fewer quality escalations. For precise end‑dimension control with Metav IndustryLine quality, order the M323.761 gauge pin from Metav Werkzeuge in Emmerich or request tailored advice from their consultants. Technical data Article number: M323.761 GTIN: 4061905061523 Brand: Metav IndustryLine Measurements Diameter: 7.61 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Mass: 0.022 kg Materials & features Material: Special steel Workshop version Transport case included Category: Gauge pins FAQ What nominal diameter does the gauge pin have? The gauge pin has a nominal diameter of 7.61 mm, specified for the Precision gauge pin M323.761 from Metav IndustryLine. What tolerance is guaranteed on the pin? The declared tolerance is ±0.001 mm for the Metav IndustryLine precision gauge pin M323.761, suitable for tight end‑dimension checks. Which material is the pin made from? The pin is manufactured from special steel, chosen for durability in workshop environments and consistent measurement faces. Is a transport case supplied with the product? Yes, the M323.761 is supplied in a transport case to protect the measuring faces during storage and transport. What are typical applications for this gauge pin? Typical uses include end‑dimension verification, fixture set‑up and go/no‑go checks in small‑series production and workshop inspection tasks with the Metav IndustryLine gauge pin M323.761. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.62mm Gauge Pin Single ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Precise 7.62 mm diameter, 50 mm length and ±0.001 mm tolerance combine to deliver sub‑micron inspection capability and consistent pass/fail decisions; reliable wear resistance from the special steel construction supports repeated use in workshop environments. Order or request application advice directly via Metav Werkzeuge for seamless integration into workshop metrology Gauge Pin M323.762 — 7.62 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.762 engineered for high‑accuracy end‑measurement, reference checking and fixture validation in workshop and production inspection tasks Diameter 7.62 mm, tolerance ±0.001 mm Length 50 mm for compact inspection setups Special steel construction for durable service Workshop version designed for everyday use Accuracy that shortens inspection cycles The core benefit of this inspection pin is its ±0.001 mm tolerance, which corresponds to 1 µm resolution at the component interface. Such fine tolerance reduces the need for repeat measurements and enables clearer go/no‑go decisions during quality checks, improving throughput without sacrificing traceability. Where laboratory comparators are unavailable, a high‑precision pin like this functions as a repeatable reference that streamlines in‑process inspection, lowering the time spent on manual verification while maintaining documented measurement quality Built to withstand workshop handling Constructed from special steel, the pin offers robust surface integrity under frequent use while remaining easy to handle thanks to its low mass. The workshop specification indicates suitability for everyday metrology tasks on the shop floor, where tools must resist knocks and hold form. The modest weight supports quick manual placement in gauges or fixtures and reduces operator fatigue during repetitive checks, helping maintain consistent measuring technique across long shifts Compact dimensions for versatile integration With a nominal diameter of 7.62 mm and a 50 mm length, the inspection pin suits a wide range of fixture bores, plug gauges and test rigs. The geometry makes it a practical reference for end‑measurements, alignment tasks and setting operations in both small‑batch production and maintenance contexts. Because the form factor is compact, the pin is straightforward to store and swap between stations, supporting flexible inspection layouts without major fixture adaptations Reliability and practical benefits for the workshop The item’s specification and workshop design provide clear operational advantages: high repeatability from the tight tolerance, material durability for longer service intervals, and a size that matches common metrology fixtures. These characteristics contribute to fewer measurement-induced rejects and a steadier production flow, aligning with Metav’s focus on making precision accessible across diverse industrial settings For precision checks that demand 1 µm accuracy, contact Metav Werkzeuge for tailored advice and purchasing guidance on the Metav IndustryLine gauge pin M323.762 Technical data Article number: M323.762 GTIN: 4061905061530 Manufacturer: Metav IndustryLine Facts Nominal diameter: 7.62 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins / inspection pins FAQ What inspection tasks is this gauge pin suited for? The Metav IndustryLine gauge pin M323.762 is designed for end‑measurements, reference checking and fixture validation where a ±0.001 mm tolerance is required Can the pin be used in production fixtures and plug gauges? Yes, the 7.62 mm diameter and 50 mm length make the pin compatible with common production fixtures and plug gauges for alignment and go/no‑go assessments How repeatable are measurements made with this inspection pin? Repeatability is supported by the tight ±0.001 mm tolerance of the M323.762, giving consistent reference dimensions for routine checks Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.63mm Test Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
A compact inspection solution that combines ultra-fine accuracy with a durable workshop finish: the gauge pin delivers ±0.001 mm tolerance on a 7.63 mm diameter and a 50 mm length, ensuring reliable end‑measurement checks and reduced rework. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.763 — single inspection pin, 7.63 mm, ±0.001 mm The Gauge pin M323.763 is a single precision inspection pin intended for accurate end‑measurement and plug checks in workshop and assembly environments. Tolerance ±0.001 mm Diameter 7.63 mm Length 50 mm Workshop version with transport case Reduce rejects with verifiable high precision Accuracy is the primary value of this inspection pin: with a tolerance of ±0.001 mm on a 7.63 mm diameter, the component enables fine end‑measurement tasks where fit and runout matter. Such precision translates into fewer assembly mismatches and less rework, improving throughput and lowering scrap rates. The pin is engineered for dimensional stability; its finished diameter is suited for plug checks, end‑face verification and reference measurements in quality control processes. Built for workshop durability and repeatable checks Manufactured from special steel, the probe offers a balance of wear resistance and stable dimensions under regular shop use. The 50 mm length gives enough engagement for most fixture and bore verifications while remaining easy to manoeuvre in confined setups. The workshop version finish provides practical robustness without compromising measurement integrity, and the single‑piece supply supports straightforward replacement or supplementation within an inspection set. Practical handling, traceability and supply confidence Delivered as a single piece in a transport case, the pin is protected in transit and ready for immediate use at the bench; the case also simplifies storage between shifts. The compact format makes it ideal for end‑measurement routines and spot checks on production lines. Backed by Metav’s European logistics and product selection, the item supports predictable replenishment and a clear supply chain for small but critical measurement tools, offering both operational reassurance and an accessible route to precision. Contact Metav Werkzeuge for tailored advice and secure the M323.763 gauge pin as a reliable tool for precise end‑measurement checks. Technical data Article number: M323.763 GTIN: 4061905061547 Weight: 0.022 kg Material: special steel Diameter: 7.63 mm Length: 50 mm Tolerance: ±0.001 mm Facts Single piece delivery SKU: M323.763 Category: Gauge pin / inspection pin Story trigger: end measurements Special features Workshop version finish Delivered in transport case (plastic or wooden case for transport) Suitable for plug checks and end‑face verification FAQ What inspections is this gauge pin suitable for? The gauge pin is intended for end‑measurement and plug checks; the 7.63 mm diameter and ±0.001 mm tolerance make it suitable for precise fit and bore verifications. Is the material corrosion‑resistant? The pin is made from special steel designed for workshop use; for increased corrosion resistance, additional protective care or coatings should be considered depending on the environment. Can this pin be used as a reference in fixture set‑ups? Yes, the combination of a stable 50 mm length and tight tolerance supports repeatable reference points in fixture and assembly checks. How is the pin supplied and protected? The item is supplied as a single piece and delivered in a transport case to protect the probe during shipment and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.64mm Gauge Pin ±0.001 mm, 50mm Length, Workshop Grade, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of high measuring fidelity and workshop-ready robustness: the 7.64 mm gauge pin combines a tight ±0.001 mm tolerance with a 50 mm shank for stable seating and repeatable checks. Supplied in a transport box and finished in special steel, this single measuring pin supports reliable end‑dimension verification. Order the component directly via Metav Werkzeuge or consult the Metav team for specification matching. Gauge pin M323.764 — Single test pin, Ø 7.64 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.764 is a single, workshop‑grade measuring pin designed for precise hole and plug verification in inspection jigs and production controls. Workshop‑grade special steel construction Diameter 7.64 mm with ±0.001 mm tolerance Length 50 mm for stable insertion and support Consistent measurement accuracy for routine inspections The primary advantage of this measuring pin is its tight tolerance (±0.001 mm), which delivers high repeatability for go/no‑go and reference checks. A precisely ground diameter of 7.64 mm minimises measurement uncertainty when used with ring gauges, bore checks or fixture locating bores. The reduced variation in diameter supports faster decision cycles on the shop floor and a lower scrap rate in serial production. Durable build suited to workshop environments Manufactured from special steel and offered in a workshop version, the pin withstands everyday handling and contact with assembly tooling. The 50 mm stainless‑feeling shank ensures secure seating in gauges and fixtures, while a compact mass (approx. 0.022 kg) keeps handling and storage straightforward. The robust finish reduces fretting and abrasion in repetitive use, extending the effective service life of the measuring element. Practical handling and application guidance As a single measuring element, the device is intended for direct comparison and positioning tasks where a solid reference is required. The 50 mm length gives sufficient support for aligned insertion without excessive overhang, reducing bending errors during measurement. For serial checks, the pin functions well as a stop, plug check, or reference dowel in assembly aids and test benches where a defined end dimension is essential. Delivery and traceability aligned with workshop logistics The pin is supplied ready for immediate use and is delivered in a transport box to protect the ground surface during transit and storage. The compact packaging simplifies transport between workshop stations and helps preserve dimensional integrity prior to installation in gauges or fixtures. A clear part identifier facilitates inventory control and traceability in quality records. Integration into inspection routines and equipment This measuring element complements standard inspection toolsets and pairs easily with ring gauges, bench fixtures and coordinate measurement preparations. When integrated into regular inspection routines it supports consistent verification of bore sizes and fits, reducing set‑up time and helping to maintain production throughput. The simple geometry allows quick visual checks and straightforward substitution within established tool lists. For specification advice or to discuss matching the M323.764 gauge pin to existing fixtures, contact Metav Werkzeuge in Emmerich for ordering and technical consultation Technical data Article number: M323.764 GTIN: 4061905061554 Manufacturer: Metav IndustryLine Facts Diameter: 7.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Material: special steel Workshop version Supplied in transport box Single measuring pin for reference and plug checks FAQ What inspection tasks is this measuring pin suited for? This measuring pin is suited for plug and bore verification, fixture locating and end‑dimension checks; the M323.764 measuring pin offers a precise reference for routine shop‑floor inspections. How precise is the diameter of the pin? The diameter is finished to a tolerance of ±0.001 mm, ensuring minimal deviation during repeated insertions and reliable comparison results with ring gauges and bores. Is the pin delivered ready for use or does it require calibration? The M323.764 is supplied as a finished measuring element; calibration status is indicated by accompanying documentation where applicable and can be arranged according to specific inspection protocols. Can this pin be used in automated checking fixtures? Yes, the compact geometry and tight tolerance make the pin suitable for mechanical fixtures and semi‑automated setups where a stable reference is required. What material is the pin made from and how does that affect wear? Manufactured from special steel, the pin balances hardness and wear resistance for extended service under workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.65mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, special steel construction and compact 50 mm length for reliable end‑measure inspection in small‑part production. The precise 7.65 mm diameter and workshop‑grade finish support repeatable checks and reduce rework. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.765 — Single test pin, 7.65 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.765 is a single, workshop‑grade test pin designed for high‑precision end‑measure checks and small‑part inspection in micro‑range metrology. ±0.001 mm tolerance for micromeasurements Diameter 7.65 mm, length 50 mm Workshop version, robust finish Delivered in protective transport case Precision that fits micro‑workshop tasks The supplied test pin delivers a tight ±0.001 mm tolerance, which places it in the high‑precision category suitable for micro‑range tasks. This level of accuracy supports reproducible go/no‑go and end‑measure checks for components where every micrometre counts. The item's compact geometry and defined length make it ideal for checking bores, pins and mating features in jigs and fixtures; the measurable benefit is a reduction in part rejection and rework by providing a dependable reference for size conformity. Robustness and handling tailored to the workshop Constructed from special steel, the pin is finished for workshop use and designed to withstand routine handling while preserving measurement integrity. The 50 mm length combined with a mass of 0.022 kg gives a tactile, stable feel during manual checks and helps avoid inadvertent tilting when inserted into fixtures. Delivery in a protective transport case preserves the surface and dimensional condition during storage and transport, so traceability and repeatability are maintained across inspection cycles without additional preparation. Simple integration into quality workflows The gauge pin supports straightforward placement into existing inspection routines and fixtures; marking and procurement are simplified by the included identifiers (SKU: M323.765, GTIN: 4061905061561). As a workshop‑grade single test pin, it is suited for repetitive end‑of‑line checks and small‑batch sampling where compact tools with tight tolerances are required. The Micro‑range classification (measuring range up to 100 mm) clarifies its intended role: precise checks on small components, jigs and assembly aids where measurement certainty contributes directly to process stability and lower scrap rates. For precision checks requiring ±0.001 mm accuracy, contact Metav Werkzeuge for a supply enquiry or technical advice; the Emmerich quality filter ensures dependable delivery and expert guidance Technical data Article number: M323.765 GTIN: 4061905061561 Brand: Metav IndustryLine Category: Gauge pins Measurements Diameter: 7.65 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg Features Material: Special steel Workshop version Protective transport case for delivery Single test pin SKU: M323.765 FAQ What accuracy does this gauge pin provide? The gauge pin M323.765 provides a tolerance of ±0.001 mm, suitable for high‑precision micro‑range inspections. Is the pin supplied ready for transport and storage? Yes, the pin is delivered in a protective transport case to preserve surface condition and dimensional integrity during handling. Which applications are appropriate for this test pin? The pin is intended for micro‑range inspection tasks such as end‑measure checks, bore verification and small‑part conformity testing in workshop and production environments. How can the product be identified for ordering? Reference the SKU M323.765 or GTIN 4061905061561 when placing a supply enquiry or checking stock availability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.66mm Gauge Pin, Single, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from a compact inspection tool that combines ±0.001 mm tolerance, a precisely ground 7.66 mm diameter and a 50 mm length to secure repeatable end‑measure verification and assembly checks; order directly via Metav Werkzeuge or contact their consultants for application advice. Gauge pin, 7.66 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin 7.66 mm is a workshop‑grade, high‑precision end‑measure pin designed for dimensional checks and assembly verification in production and inspection environments. Workshop‑grade precision ±0,001 mm Diameter 7.66 mm with ground finish 50 mm length for compact fixture checks Special steel construction for long service life High‑precision control for end‑measure checks A small, stable measuring element with a ±0.001 mm tolerance provides a measurable advantage where tight clearances matter. The compact design supports quick insertion into bores and fixtures, enabling consistent pass/fail decisions during incoming inspection or inline quality control. By converting geometric fit into a repeatable physical check, the pin reduces ambiguity in go/no‑go assessments and shortens decision time at the workbench. The combination of close tolerance and robust finishing means fewer re‑measurements and improved production throughput. Durable construction that stays accurate Manufactured from special steel and delivered as an individual workshop‑grade unit, the pin is prepared for continuous handling and frequent use. The ground surface finish minimises wear and maintains nominal diameter over many cycles, supporting long‑term repeatability in measurement routines. For inspection tasks where component life and abrasion resistance matter, this material choice offers a balance between toughness and machinability; periodic visual inspection of the measuring face is recommended to preserve metrological integrity. Practical dimensions for workshop and fixture use With a nominal diameter of 7.66 mm and a 50 mm overall length, the pin is easy to manoeuvre in tight assemblies and fits common gauge setups without requiring specialised holders. Its compact size simplifies storage and handling on the shop floor while providing sufficient engagement length for reliable positional checks. The modest mass also reduces the risk of accidental seating errors during manual operation, contributing to faster cycle times in repetitive inspection tasks. Clear function, straightforward supply Supplied as a single, workshop‑oriented inspection pin, the item is intended for direct integration into existing quality processes and fixture sets. Its role as an end‑measure verification tool is straightforward: establish a known physical standard for bore, shaft or alignment checks and document conformity efficiently. Traceability information such as article identifiers is included in the technical data to support inventory and quality record‑keeping. Secure consistent end‑measure accuracy with Metav IndustryLine gauge pins—contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.766 GTIN: 4061905061578 Manufacturer: Metav IndustryLine Facts Nominal diameter: 7.66 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg ECLASS: 21170231 Special features Material: special steel Workshop version Supplied as single pin Label/usage: end‑measure checks FAQ What tolerance does the gauge pin offer? The gauge pin from Metav IndustryLine (M323.766) is specified with a tolerance of ±0.001 mm, suitable for fine dimensional verification. Which applications suit this inspection pin? Typical uses include bore and shaft verification, assembly fit checks and fixture validation where a compact, high‑precision pin supports quick go/no‑go decisions. What material is used and how durable is it? The pin is made from special steel with a ground finish to enhance wear resistance and preserve nominal diameter under frequent use. Is the pin supplied as a single item or in sets? This product is supplied individually as a workshop‑grade inspection pin intended for direct integration into existing measurement or assembly routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.67mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
A workshop-grade precision gauge pin with a 7.67 mm diameter and an ultra‑tight ±0.001 mm tolerance, finished in special steel and sized at 50 mm for compact inspection tasks; supplied in a protective transport box for safe handling. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin M323.767 — 7.67 mm, ±0.001 mm (Metav IndustryLine) The Gauge Pin M323.767 is a compact, workshop‑grade test pin designed for precision end‑measure checks, go/no‑go verification and calibration transfer work in industrial inspection and assembly settings. Workshop-grade precision test pin Diameter 7.67 mm ±0.001 mm tolerance Length 50 mm for installation checks Supplied in protective transport box Precision where micron tolerance matters The test pin offers a guaranteed ±0.001 mm tolerance (1 µm), making it suitable for measurements and fit checks where repeatability and small clearances are critical. The tight tolerance reduces uncertainty in go/no‑go procedures and direct bore checks, so measurement cycles become more efficient and reliable. By using a single, certified diameter pin rather than approximate gauges, inspection steps are shortened and decision thresholds are clearer, which supports faster process control in serial production or maintenance tasks. Robust construction for everyday workshop use Manufactured from special steel, the pin is engineered for wear resistance and dimensional stability under normal workshop conditions. The 50 mm nominal length gives sufficient engagement for many bore and assembly checks while remaining easy to handle and manoeuvre in confined spaces. The workshop version build balances precision with practicality: it withstands frequent use, is simple to store in tool trays and is compatible with typical fixture checks and manual measuring routines. Practical integration into inspection and assembly workflows As a single‑diameter gauge pin, this component is ideal for setting up measuring instruments, verifying bore sizes and transferring reference dimensions between fixtures. The compact format and the included protective transport box support organised tool management and reduce the risk of damage during storage or transport. For production lines that require fast, repeatable checks, the pin simplifies gauging steps and contributes to consistent throughput. Reliability and supply chain benefits from Metav Branded under Metav IndustryLine, the pin benefits from Metav’s focus on democratising precision — combining dependable quality control with efficient European distribution. Metav’s longstanding market presence and broad product range help ensure continuity of supply and straightforward replacement when additional diameters or spares are required, supporting sustained measurement reliability across workshops and small industrial operations. For workshop accuracy and reliable inspection results, request the Metav IndustryLine gauge pin M323.767 through Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering support. Technical data Article number: M323.767 GTIN: 4061905062377 Manufacturer: Metav IndustryLine Facts Diameter: 7.67 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.022 kg Special features Material: special steel Workshop version construction Supplied in protective transport box Single, individual test pin for end‑measure checks FAQ What is the exact tolerance of this gauge pin? The gauge pin M323.767 is specified with a tolerance of ±0.001 mm, enabling micrometre‑level checks and precise go/no‑go verification. What material is the pin made from? This Metav IndustryLine test pin is made from special steel, chosen for dimensional stability and resistance to wear in workshop environments. What measurements is the pin suitable for? Use the pin for bore diameter checks, assembly fit verification, transfer measurements and setting of inspection fixtures where a 7.67 mm reference is required. How is the pin delivered? The single pin M323.767 is supplied in a protective transport box to minimise handling damage and to keep the gauge ready for use. Can the pin be used as a calibration standard? The pin is intended for inspection and gauging tasks; for formal calibration standards or traceable certificates, please consult Metav Werkzeuge for available calibration services and options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.68mm Gauge Pin, Workshop Version, ±0.001mm, Length 50mm - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy and durable construction to streamline bore inspection and reduce rework. The exceptional ±0.001 mm tolerance on a 7.68 mm diameter pin and its compact 50 mm length make this an efficient reference for repeatable checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single – 7.68 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The gauge pin, single, 7.68 mm is a precision inspection pin for end‑measurement and go/no‑go checks in workshop environments. Diameter 7.68 mm with ±0.001 mm tolerance Length 50 mm for compact inspection setups Made from special steel for long‑term stability Workshop version for routine metrology tasks Accurate control that prevents costly rework The core benefit of this precision pin is its repeatability: with a tolerance of ±0.001 mm, it provides a reliable reference for bore and hole verification, reducing scrap and rework in production. Used as a master datum for quick go/no‑go or reference checks, the component enables faster decision making on the shop floor while supporting consistent quality control. The tight tolerance supports fine inspection tasks where conventional gauges would introduce uncertainty. Durable construction for daily workshop use Constructed from special steel, the pin resists deformation under normal handling and maintains geometric integrity across repeated cycles. The 50 mm length balances reach and handling comfort, allowing the pin to be used in confined fixturing or handed inspection stations without compromising stiffness. This robustness translates into fewer replacements and lower downtime, which is particularly valuable for medium‑volume manufacturing and maintenance routines. Practical integration in inspection processes Designed as a single gauge pin, this item fits into established inspection jigs and plug gauge sets, simplifying inventory while providing a clearly defined measurement standard. The compact form factor and the 7.68 mm diameter make it suitable for end‑mass checks and fast verification steps in assembly or incoming goods inspection. For traceable procurement and system compatibility, specify the gauge pin by its article number M323.768 and the Metav IndustryLine designation when ordering to ensure correct part selection. For consistent, repeatable checks specify the Metav IndustryLine gauge pin M323.768 through Metav Werkzeuge — contact our Emmerich team for tailored advice and prompt supply Technical Data Article number: M323.768 GTIN: 4061905062384 Manufacturer: Metav IndustryLine Category: Messstifte Core technical data Diameter: 7.68 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.022 kg Material: Special steel Special features Workshop execution (Werkstatt‑Ausführung) Single gauge pin for end measurements Label: Gauge pin, single, 7.68 mm, ±0.001 mm, length 50 mm FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.768 is specified with a tolerance of ±0.001 mm, offering high repeatability for fine inspection tasks. Which materials is the pin suitable for checking? This pin is a dimensional reference intended for measuring and checking bores and holes; material compatibility depends on the part under inspection rather than the pin itself. Is the item suitable for routine shop‑floor inspection? Yes, the workshop version is designed for regular metrology use and offers a balance of durability and handling for everyday checks. How should the pin be referenced when ordering replacement parts? Order using article number M323.768 and the Metav IndustryLine designation to ensure the correct gauge pin is supplied. Can this pin be integrated into existing gauge sets or jigs? The compact 50 mm length and standard diameter make the pin straightforward to incorporate into typical inspection jigs and plug gauge arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.69mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade precision and a ±0.001 mm tolerance to ensure reproducible end‑measure checks and minimise rework. The compact 50 mm length and special steel construction deliver reliable handling and long service life in inspection routines. Order directly through Metav Werkzeuge or contact our consultants for specification support and delivery details. Gauge pin M323.769 — precision test pin, 7.69 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.769 is a workshop‑grade precision test pin designed for accurate end‑measure verification and pin‑gauge applications in production and inspection environments. Workshop‑grade precision, ±0.001 mm tolerance Diameter exactly 7.69 mm, length 50 mm Hardened special steel construction Delivered in a protective transport case Consistent accuracy for end‑measure control The core benefit of a tightly controlled tolerance is repeatable measurement: a diameter tolerance of ±0.001 mm minimises fit ambiguity and reduces the need for corrective machining. In practice, this precision shortens inspection cycles and lowers scrap rates when used as a reference pin in go/no‑go jigs or for checking bore sizes. The compact 50 mm length offers agile handling while still providing sufficient engagement for reliable verification in assembly and quality control tasks. Durable construction that stands up to workshop use Built from special steel and finished for workshop conditions, the pin is manufactured to maintain dimensional stability under repeated use. Hardened surfaces resist wear that commonly alters functional diameters over time, so the initial calibration remains meaningful over longer intervals. The robust material choice translates into fewer replacements and a predictable service life, making the test pin a cost‑effective precision tool in production settings. Practical handling and integration into inspection routines The small, single‑piece design ensures straightforward storage and fast deployment in fixture operations or manual inspection benches. Supplied in a protective transport case, the component arrives ready for safe storage and transport between production and metrology areas. As a compact reference element for end‑measure tasks, it integrates easily into pin sets or bespoke checking fixtures and supports reliable, fast decision making on the shop floor. For specification advice, availability or to request a delivery from Metav Werkzeuge for the Metav IndustryLine gauge pins, contact our team at Metav Werkzeuge for prompt assistance and supply coordination. Technical data Article number: M323.769 GTIN: 4061905062391 SKU: M323.769 Material: Special steel Weight: 0.022 kg Measurements & accuracy Diameter: 7.69 mm Length: 50 mm Tolerance: ±0.001 mm Features & versions Workshop version Protective transport case included Hardened construction Application: end‑measure checks FAQ What is the primary application of this gauge pin? The gauge pin M323.769 is intended for end‑measure verification and pin‑gauge tasks, serving as a precise reference for bore checks and go/no‑go inspection fixtures. Is the measurement tolerance suitable for high‑precision gauges? Yes, the ±0.001 mm tolerance places this test pin in the high‑precision category for workshop inspection, delivering reproducible fits for tight tolerance assemblies. What material is used and how does it affect durability? Constructed from special steel, the pin offers enhanced wear resistance and dimensional stability under repeated use, which prolongs calibration intervals and reduces replacement frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.6mm Test Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Precision test pin with sub‑micron accuracy and robust workshop design — ideal for repeatable end‑dimension checks; order directly via Metav Werkzeuge or consult the specialists for integration into inspection fixtures. Test Pin M323.760 — 7.60 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) The Test Pin M323.760 is a single precision gauge pin intended for end‑dimension inspection and Go/No‑Go checks in metrology and workshop quality control. Submicron accuracy ±0.001 mm Diameter 7.60 mm ground to tolerance 50 mm working length for fixture use Workshop‑grade special steel construction Consistent, measurable precision for inspection tasks The inspection pin delivers ±0.001 mm accuracy on a nominal 7.60 mm diameter, making it suitable where small deviations affect assembly and fit. As a hardened, ground gauge element, it provides a reliable reference for comparative checks and end‑dimension verification. The tight tolerance reduces rework and inspection time by enabling fast, repeatable measurements that integrate smoothly into existing quality procedures. Durable construction optimised for workshop handling Manufactured from special steel, the pin combines wear resistance with dimensional stability over repeated cycles. The 50 mm length offers a practical working reach for fixture mounting and probe contact without excessive overhang, while the workshop‑oriented design resists typical handling stresses. Together these properties extend service life and lower total cost of ownership by reducing the need for frequent replacements. Practical integration into standard inspection workflows As a single test pin, the component is suited to manual gauging, fixture back‑ups and sample checks on production lines. The compact form facilitates fast insertion into dedicated gauges and simple interchangeability in modular fixtures. With an industry‑recognised GTIN and a clear article number, stock control and traceability are straightforward for purchasing and inventory systems, supporting consistent supply from Metav IndustryLine. For sub‑micron end‑dimension checks, request the Metav IndustryLine Test Pin M323.760 through Metav Werkzeuge — Metav Werkzeuge can advise on fixture compatibility and supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance. Technical Data Article number: M323.760 GTIN: 4061905061516 Brand: Metav IndustryLine Category: Gauge pin (test pin) Dimensions & Weights Diameter: 7.60 mm Length: 50 mm Weight: 0.022 kg Measurement range: 7.6 mm Materials & Features Material: Special steel Accuracy: ±0.001 mm Version: Workshop execution ECLASS: 21170231 FAQ What tolerance does this inspection pin offer? The inspection pin provides a tolerance of ±0.001 mm on the nominal 7.60 mm diameter, giving sub‑micron repeatability for end‑dimension checks with the Test Pin M323.760. Which applications suit this gauge pin? This gauge pin is intended for end‑dimension inspection, Go/No‑Go checks, fixture use and quick comparative measurements in workshop and production metrology. Is the material suitable for frequent contact with hardened components? The pin is made from special steel and is designed for workshop use, offering good wear resistance under repeated contact typical in gauging operations. Can the pin be used in modular fixtures or custom gauges? Yes — the 50 mm working length and ground diameter make the pin straightforward to integrate into modular fixtures, back‑ups and simple Go/No‑Go arrangements. How is traceability supported for stock management? The article number M323.760 and GTIN 4061905061516 enable clear identification for ordering and inventory control of this gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.71mm Test Pin 50mm Length ±0.001 mm, Workshop Version - Metav IndustryLine
Benefit from workshop-grade durability combined with ±0.001 mm repeatability and a compact 50 mm length for reliable end-point checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.771 — 7.71 mm, ±0.001 mm, Metav IndustryLine workshop version A gauge pin designed for precise end measurements and fit verification in workshop and quality-control routines. Workshop version for daily use Tolerance ±0.001 mm Special-steel construction 50 mm length for deep checks Consistent precision that protects production tolerances High-accuracy measurement reduces rework and secures process capability; the ±0.001 mm tolerance of this pin minimises uncertainty when verifying bores or mating parts. With a nominal diameter of 7.71 mm, the pin serves typical small-diameter checks where dimensional certainty is critical. The compact form factor supports repeatable seating in fixtures and gauge blocks, ensuring each verification step produces comparable results and supporting manufacturing decisions based on measurable facts rather than estimates. Robust design for workshop environments Built as a workshop version, the pin combines a dense special steel alloy with a surface finish suited to regular use, providing long service life under repetitive seating and withdrawal. The 50 mm overall length permits insertion beyond chamfers and into moderate-depth bores, while the modest mass keeps handling straightforward during inspection routines. Supplied for practical transport and storage, the design prioritises durability and day-to-day reliability over delicate laboratory styling. Integrates simply into existing metrology workflows The pin supports fast go/no-go checks as well as comparative measurement setups when combined with pin blocks or micrometric stands. Traceability and order accuracy are simplified by the clear product identifiers: SKU M323.771 and GTIN 4061905062902, which help with inventory and documentation. Handling recommendations and routine care—wiping contact faces clean and avoiding knocks—preserve measurement integrity; this approach keeps inspection throughput high while maintaining the exactness required for component acceptance. Choose the Metav IndustryLine gauge pin M323.771 for dependable ±0.001 mm performance and contact Metav Werkzeuge in Emmerich for ordering or tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.771 GTIN: 4061905062902 Brand: Metav IndustryLine Category: Gauge pin Facts Diameter: 7.71 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.023 kg Special features Workshop version Material: Special steel Supplied in transport box Intended for end measurements and fit verification FAQ What accuracy does the gauge pin offer? The Metav IndustryLine gauge pin M323.771 provides a tolerance of ±0.001 mm, making it suitable for tight acceptance criteria and fine fit checks. What material is the pin made from? This test pin is manufactured from a special steel grade chosen for wear resistance and dimensional stability in workshop conditions. Can the pin be used for deep-bore checks? With an overall length of 50 mm, the pin is suitable for moderate-depth bore and seat verifications without compromising handling. How is the product identified for ordering and inventory? Order and inventory identification is via SKU M323.771 and GTIN 4061905062902, which assist in procurement and traceability. Is the gauge pin appropriate for daily workshop use? Yes, the workshop-oriented construction and material selection make the pin well suited for routine inspection cycles and repetitive seating. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.72mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Precision and durability in compact form: the 7.72 mm gauge pin provides ±0.001 mm tolerance and a 50 mm length for reliable end measurements; order directly via Metav Werkzeuge or consult our specialists for confirmation of suitability. Gauge Pin M323.772 — single precision pin, 7.72 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Gauge Pin M323.772 is a workshop‑grade single precision pin designed for exact end‑measurement and pin‑gauging tasks in small‑part metrology. 7.72 mm nominal diameter Tolerance ±0.001 mm (1 µm precision) Length 50 mm for end measurements Workshop‑grade special steel construction Precision tailored to end measurements This compact precision pin is manufactured for tasks where repeatability and a minimal measurement uncertainty are decisive. With a stated tolerance of ±0.001 mm (equivalent to 1 µm), the pin is suited to final size checks, plug‑gauging and comparative verification of mating bores. Its nominal 7.72 mm diameter and smooth working surface reduce measurement scatter and support consistent process decisions in quality control. The design targets micro‑component inspection in toolrooms and production cells where small deviations have a direct impact on assembly fit. Robust construction for workshop environments Built from special steel in a workshop‑grade finish, the pin balances surface integrity with handling resilience. A length of 50 mm offers an effective engagement for through‑checks and shallow bores while retaining stiffness to limit bending under manual use. The compact mass supports quick interchange and low thermal inertia during short inspection cycles. This combination of material and geometry reduces the need for repeat measurements and contributes to smoother throughput in repetitive inspection tasks. Simple integration into inspection routines The gauge pin complements existing metrology assets and is straightforward to incorporate into go/no‑go checks or comparator setups. Its compact format makes storage and retrieval efficient in busy inspection benches; the pin is ideal for end measurements and final acceptance sampling where fast, reliable decisions are required. Documentation such as GTIN and SKU allow traceable inventory management and simple referencing in work instructions or inspection plans, supporting auditability and consistent measurement practice. Contact Metav Werkzeuge for tailored advice or to request a quotation for the M323.772 gauge pin, specifying measurement requirements and traceability preferences Technical data Article number: M323.772 GTIN: 4061905062919 Manufacturer: Metav IndustryLine Facts Diameter: 7.72 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.023 kg eClass: 21170231 Special features Workshop execution Single gauge pin Material: special steel Intended use: end measurements FAQ What level of precision can be expected from this gauge pin? The Gauge Pin M323.772 (Metav IndustryLine, SKU M323.772) is specified at ±0.001 mm, offering 1 µm nominal precision suitable for high‑accuracy end measurements. Is the pin suitable for routine plug‑gauging of bores? Yes, the 7.72 mm nominal diameter and 50 mm length make the pin suitable for plug‑gauging and comparative checks of small bores in workshop inspection processes. What material is used and how does it affect handling? The pin is made from special steel, which provides a balance of surface hardness and handling robustness appropriate for frequent manual use in production environments. Can this pin be referenced in inspection documentation? Yes, the Gauge Pin M323.772 includes GTIN and SKU information for direct reference in inspection plans and inventory systems to support traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.73mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 7.73 mm diameter, ±0.001 mm tolerance and a compact 50 mm length for reliable end‑dimension checks in the workshop. Order the precision gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.773 — 7.73 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The gauge pin M323.773 is a workshop-grade test pin intended for precise inspection of end dimensions and tight fits in production and assembly environments. Precision diameter 7.73 mm for exact fits Tolerance ±0.001 mm for micrometre accuracy 50 mm length, workshop execution Special steel construction with transport case Ensure critical fits with reliable sub‑micron accuracy The main benefit of this test pin is its high dimensional accuracy: with a tolerance of ±0.001 mm, the pin delivers micrometre‑level control for final checks and assembly verification. Such precision reduces the risk of rejected parts and rework by ensuring that bores and mating components meet their design limits. The compact geometry and defined length make the component suitable for repeatable checks on benches, in fixtures or as a reference within measuring rigs. Robust build for routine workshop use Manufactured from special steel, the pin is produced as a workshop execution, combining durability with the handling characteristics required for daily use. The solid construction supports stable seating in gauges and fixtures while the low weight (approx. 0.023 kg) keeps handling straightforward. Delivery in a plastic or wooden transport case protects the gauge during storage and transit, preserving the measuring face and dimensional integrity between uses. Practical applications across inspection and assembly tasks Typical applications include end‑dimension verification, go/no‑go seating checks, and use as a reference pin for aligning small assemblies. In tight‑tolerance production runs the pin provides a fast, objective way to confirm hole diameters and mating fits without complex setup. Because it is supplied as a single item with a clearly defined length of 50 mm, integration into existing inspection routines or jigs is simple and predictable. Traceability and identification for procurement and inventory The item is identified as M323.773 and is intended for batch procurement where consistent tool specification matters. Clear labelling and packaging help maintain traceability in stores and on the shop floor; the compact size makes it a straightforward addition to a precision tooling kit. Using standard identifiers supports ordering and stock management while ensuring the same dimensional reference is used across production stations. Discuss application requirements with Metav Werkzeuge to secure the correct precision pins for final dimension control — our Emmerich team advises on fit, packaging and delivery options to match workshop processes. Technical Data Article number: M323.773 GTIN: 4061905063527 Label: Prüfstift, einzeln, 7,73mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 7.73 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.023 kg eClass: 21170231 Special features Material: Special steel Workshop execution Delivered in plastic or wooden transport case Supplied as a single test pin (single item) FAQ What applications is this gauge pin suitable for? The gauge pin M323.773 is designed for end‑dimension checks, go/no‑go seating and alignment tasks in production and assembly environments where a 7.73 mm reference and ±0.001 mm tolerance are required. Is the pin supplied with a calibration certificate? No specific calibration certificate is stated for this item; the description identifies it as a workshop execution test pin without an included calibration record. What material is used for the pin and how does that affect use? The pin is made from special steel, offering robust handling and resistance to routine workshop wear; this material choice supports repeatable seating in fixtures and stable dimensional performance. Can this pin be used in measuring fixtures and gauges? Yes — the compact 50 mm length and precise diameter make it suitable for integration in measuring rigs, bench checks and fixture verification where a fixed reference is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com