Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
2500 N Hold Force Vertical Clamp Waagerechter Foot, Stainless Steel - Kukamet
Take advantage of a robust combination of stainless-steel durability and proven clamping performance — the device delivers up to 2,000 N clamping force with a 2,500 N holding capacity, making it suitable for reliable fixture work in industrial and workshop environments. Order directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Vertical clamp 211 — stainless steel vertical clamp, 2,000 N clamping force Vertical clamp 211 is a compact stainless-steel fixture clamp for secure workholding, designed for horizontal-foot mounting and simple integration into jigs and benches. Stainless steel construction 2,000 N maximum clamping force 2,500 N maximum holding force Horizontal-foot mounting, M8x50 spindle Reliable clamping where repeatability matters The compact vertical fixture delivers consistent clamping through a M8x50 pressure spindle, providing controlled force transfer for repeatable setups. Constructed from stainless steel, the device resists corrosion and maintains accuracy in humid or oil-prone environments, reducing downtime for maintenance. The combination of 2,000 N clamping force and 2,500 N holding capacity supports medium-duty assembly and machining tasks, improving process stability and reducing the need for rework. Easy integration and stable mounting for jig systems Designed with a horizontal-foot mounting, the clamp offers straightforward attachment to flat plates, subplates or bench fixtures. Its low profile and compact form factor simplify layout planning and allow multiple clamps to be installed in tight patterns, increasing workpiece stability without adding bulk. The stainless construction and standard spindle thread mean the device integrates with common workshop tooling and can be replaced or upgraded without revising existing fixturing. Durability and practical benefits in everyday workshop use At a weight of approximately 0.415 kg, the clamping device balances robustness with manageable mass for fixture design. The corrosion-resistant finish and simple spindle mechanism minimise service intervals and keep total cost of ownership low. For operations that prioritise uptime, the clamp provides an efficient, maintenance-light solution: fewer interruptions, consistent contact pressure and dependable holding during light machining and assembly tasks. For reliable stainless-steel clamping choose the Kukamet 211 vertical clamp — contact Metav Werkzeuge for technical advice or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S211-3 GTIN: 8680731504019 Manufacturer: Kukamet Facts Weight: 0.415 kg Maximum clamping force: 2000 N Maximum holding force: 2500 N Special features Material: stainless steel Pressure spindle: M8x50 Mounting: horizontal-foot Category: clamp / fixture FAQ What clamping and holding forces does this clamp provide? The Kukamet Vertical clamp 211 (SKU S211-3) offers a maximum clamping force of 2,000 N and a maximum holding capacity of 2,500 N. Is the clamp suitable for corrosive workshop environments? Yes, the body is made from stainless steel, so the Vertical clamp 211 is resistant to corrosion and suited to conditions where moisture or cutting fluids are present. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot fitted to flat surfaces; the design allows secure attachment to bench plates and subplates for jig systems. What spindle specification does the device use? The clamp uses an M8x50 pressure spindle, providing adjustable contact pressure and compatibility with standard workshop replacement parts. Can the clamp be used in a multi-clamp fixture layout? Yes, the compact dimensions and horizontal-foot mounting make the device suitable for closely spaced clamp arrays to improve workpiece stability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Holding Force Horizontal Pneumatic Clamp 95° Angle, Zinc-Plated - Kukamet
Take advantage of a compact pneumatic toggle clamp that pairs 2000 N clamping force with a 2500 N holding capacity for reliable fixture security; the galvanised finish reduces corrosion and keeps maintenance low. Order directly via Metav Werkzeuge or consult the team for integration advice to maintain steady production flow. Pneumatic Toggle Clamp 611 — Kukamet | 2000 N clamping force, galvanised The Pneumatic Toggle Clamp 611 is a pneumatic clamping solution with a horizontal foot mounting, designed for medium-duty fixture and jig applications in production environments. 2000 N clamping force 2500 N holding force Galvanised corrosion resistance Horizontal foot mounting, 95° toggle Consistent, measurable clamping performance for production lines The clamp delivers a repeatable 2000 N clamping force and a 2500 N holding force, ensuring components remain secure during machining and assembly. The numerical specifications enable planners to calculate safety margins and fixture layouts precisely: clamping force refers to the active force applied to the workpiece, while holding force indicates the maximum static retention capacity. With a nominal mass of 0.86 kg, the unit imposes negligible load on moving fixture plates, supporting faster cycle times and predictable process control. Compact design that simplifies fixture integration A low-profile, horizontal foot mounting makes the unit suitable for confined jigs and automated workstations. The 95° toggle angle provides a clear open/closed position for straightforward control logic in pneumatic circuits. Because the clamp is a pneumatic toggle clamp, it integrates with standard compressed-air systems and can be mounted in arrays without significant spatial penalty, helping to reduce setup time and optimise floor space in busy production cells. Durable finish and low maintenance for industrial use The galvanised surface treatment improves resistance to humidity and coolant exposure, lowering the frequency of preventative maintenance. Materials and finish were selected to provide stable performance under repeated actuation, which supports a longer service life and fewer unplanned stops. In practice, this means reduced downtime and a smaller maintenance burden for workshop teams who require dependable clamping over many cycles. Clear applications and practical benefits for workshops Engineered for fixture, jig and assembly use, the clamp suits medium-duty metalworking and general workshop tasks where reliable holding is necessary without heavy structural mass. The pneumatic actuation removes manual effort from frequent clamping operations, contributing to ergonomic improvements and consistent part quality. When process engineers require a compact, quantifiable clamping solution that fits into existing pneumatic infrastructure, this clamp offers a balance of performance, corrosion resistance and straightforward mechanical integration. For technical advice, integration support or to order the Kukamet Pneumatic Toggle Clamp 611, contact Metav Werkzeuge for precise guidance and reliable supply from Emmerich. Technical data Article number: 611-3 GTIN: 8680731502909 Category: Spanner Manufacturer: Kukamet Core specifications Clamping force (max): 2000 N Holding force (max): 2500 N Angle: 95° Weight: 0.86 kg Special features Mounting: horizontal foot Material: galvanised Actuation type: pneumatic toggle clamp Arm: not applicable FAQ Which production tasks is this clamp best suited for? The clamp is suited for fixture, jig and assembly tasks where a measurable 2000 N clamping force and 2500 N holding force ensure stable part retention during machining and handling. How does the galvanised finish affect service life? Galvanised coating improves corrosion resistance and reduces maintenance intervals for the clamp, helping to preserve reliable operation in workshop environments. Can the clamp be integrated into existing pneumatic setups? Yes, as a pneumatic toggle clamp the unit connects to standard compressed-air systems and is designed for straightforward integration into automated workstations. What is the difference between clamping force and holding force? Clamping force denotes the active pressure applied to the workpiece (2000 N), while holding force is the maximum static retention capacity (2500 N); both values help in selecting appropriate fixturing for specific processes. Is the clamp suitable for tight fixture spaces? With a horizontal foot mounting and a compact mass of 0.86 kg, the clamp is intended for confined jigs and arrays where space optimisation is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Holding Force U-Base Toggle Clamp With Hook, Zinc Plated, 41mm Thread Length - Kukamet
Combine galvanised construction with a holding force of 2,500 N and a secure U-base to ensure reliable, repeatable fixture clamping; order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 413 — Hook latch clamp, galvanised, U-base (Kukamet) A Latch clamp 413 for secure fastening of jigs and fixtures, designed as a hook-type closure with a U-base for stable mounting. Galvanised steel construction Holding force 2,500 N U-base mounting for stable fit Integrated hook and 41 mm thread Heavy-duty performance where it matters The latch is engineered for demanding clamping tasks, offering a holding force of 2,500 N and a pressing force of 2,000 N, which together provide a clear performance advantage in repetitive assembly and fixturing applications. The lever-style mechanism translates operator motion into consistent clamping pressure, reducing setup variability. By specifying the force values, this closure clamp allows planners to match the component tolerances and fixture design to a defined load class, supporting predictable production processes and fewer reworks. Robust mounting and compact dimensions Designed for straightforward integration, the model features a U-base mounting style that ensures lateral stability on fixture plates and frames. The 41 mm thread length permits secure adjustment and fine alignment of the hook engagement, while the unit weight of 0.285 kg keeps the component lightweight without compromising rigidity. These measurable attributes translate into easier positioning in fixtures and predictable mechanical behaviour under load, simplifying both initial installation and later modifications to tooling layouts. Corrosion resistance and serviceability for long runs Constructed from galvanised steel, the closure resists surface corrosion in workshop environments, extending service life and reducing maintenance frequency. Galvanising provides a protective zinc layer that slows oxidation compared with untreated steel; where occasional lubrication or inspection is scheduled, the protective coating supports continued reliable operation. The hook-type design allows quick engagement and disengagement, maintaining production flow while keeping clamp service needs minimal and easy to plan. Practical applications and operational benefits Suitable for fixture building, transport lids, access panels and repeatable assembly operations, this hook latch clamp shortens cycle times by enabling fast, repeatable securing and release. Integration into jigs benefits from the clearly stated force ratings and compact footprint, which together reduce the need for oversized fixtures and enable closer component positioning. The combination of consistent clamping force and corrosion-resistant finish supports uptime and gives operators confidence in handling and repeatability during continuous production shifts. For ordering, specification checks or technical advice on the Kukamet hook latch clamp, contact Metav Werkzeuge for direct assistance and reliable supply from Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 413-3 GTIN: 8680731502589 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.285 kg Pressing force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Special features Material: galvanised steel Mounting: U-base (U-Fuß) With hook SKU: 413-3 FAQ What load capacities does this clamp provide? The Latch clamp 413 (Kukamet, SKU 413-3) provides a maximum holding force of 2,500 N and a pressing force of 2,000 N, specified for predictable fixture loading. Is this clamp suitable for outdoor or humid workshop conditions? The galvanised finish on the Kukamet latch clamp offers improved corrosion resistance, making it suitable for humid workshop environments though not a substitute for stainless steel in highly corrosive settings. How is the latch fastened to a fixture plate? The clamp uses a U-base mounting arrangement; the U-base allows stable attachment to fixture plates and frames and the 41 mm thread length permits fine adjustment of the hook engagement. What maintenance does the hook latch require? Routine visual inspection and light lubrication at pivot points are recommended for the Kukamet hook latch clamp to preserve smooth lever action and prolong the galvanised finish. Which applications are typical for this hook-type latch clamp? Typical uses include jigs and fixtures, transport closures, access panels and repeatable assembly tasks where fast, repeatable securing is required; the Latch clamp 413 is specified for such applications due to its force ratings and compact design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Horizontal Toggle Clamp With Hook, 41mm Thread Length, Zinc Plated - Kukamet
Benefit from a compact, galvanised latch clamp that combines a 2,500 N holding force with a low mass of 0.32 kg for reliable fixture retention and easy handling; order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch Clamp 421 — Horizontal base toggle latch with hook, galvanised, Kukamet The Latch Clamp 421 is a compact horizontal toggle clamp designed for secure fixturing in jigs and fixtures where a hooked closure and reliable holding force are required. Galvanised steel construction for corrosion resistance 2,500 N maximum holding force for secure retention Horizontal base mounting for easy fixture integration Hook closure with 41 mm thread length for adjustment Faster, more reliable clamping for production workflows The compact toggle design delivers consistent clamping action while keeping set-up times to a minimum. With a 2,000 N clamping force and a 2,500 N holding force, this latch provides a clear margin between applied pressure and the force required to resist release, enhancing safety and repeatability on production lines. The horizontal-foot mounting enables stable attachment to fixture plates, while the hook closure secures parts without additional locking elements. These characteristics combine to reduce the need for rework and support predictable cycle times in both small-batch and serial operations. Durable, low-maintenance construction that stands up to shop environments Manufactured from galvanised material, the clamp is protected against corrosion for prolonged service life in workshop and light industrial settings. The lightweight body at 0.32 kg eases handling during assembly or retrofitting of fixtures, yet the component maintains robust mechanical performance. The 41 mm thread length allows fine adjustment of the hook position for precise engagement, making the latch suitable for components with minor dimensional variations. Where longevity and low upkeep are priorities, this latch reduces replacement frequency and maintenance effort. Integrates simply into existing jigs and tooling with predictable behaviour The horizontal base and hooked closure simplify retrofitting into existing tooling arrangements: the mounting foot provides a secure reference, while the lever action ensures quick engagement and disengagement for repetitive tasks. The compact footprint supports dense tooling layouts without obstructing adjacent operations. As a general-purpose toggle latch, it is suitable for clamp-and-release workflows in assembly, fixture building and light manufacturing, offering consistent holding performance and simple mechanical adjustment for process optimisation. For dependable jigs and fixtures, choose the Kukamet Latch Clamp 421 — contact Metav Werkzeuge in Emmerich for purchasing and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 421-3 GTIN: 8680731502596 ECLASS: 21041718 ETIM: EC011973 Numbers / Core technical data Weight: 0.32 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Designs / Special features Material: galvanised steel Mounting: horizontal base Closure type: hook SKU: 421-3 With hook: yes FAQ What is the main advantage of this latch for fixture work? The latch offers a compact solution with a 2,500 N holding force, making the Kukamet latch clamp 421 suitable where secure, repeatable retention and quick operation are required. Can the clamp be adjusted to accommodate different part heights? Yes, adjustment is possible via the 41 mm thread length on the hook, allowing the latch to be fine-tuned for slight variations in component height. Is the material suitable for humid or workshop environments? The galvanised construction of the latch clamp 421 provides corrosion resistance, which improves durability in humid or general workshop conditions. How is the latch mounted to a fixture plate? The clamp uses a horizontal base mounting arrangement that provides a stable reference for attachment to fixture plates and jigs. What are the typical applications for this type of toggle latch? Common uses include jigs and fixtures for assembly, light manufacturing and repair benches where a hooked closure and quick, repeatable clamping are needed for process efficiency. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Pneumatic Clamp Horizontal Base, 90° Three-Point, Zinc-Plated, Max Hold 9000 N - Kukamet
Take advantage of a galvanised, heavy‑duty design with a pneumatic cylinder for fast, repeatable clamping and a compact 90° orientation that saves fixture space; order reliably via Metav Werkzeuge or consult their specialists for integration advice. Pneumatic toggle clamp 682 — Kukamet, horizontal foot, 2.5 kN cylinder Pneumatic toggle clamp 682 is a pneumatically actuated toggle clamp designed for fixtures and jigs where rapid, consistent clamping is required Pneumatic actuation, 2,500 N cylinder force Horizontal foot for secure fixture mounting Galvanised finish for corrosion resistance Maximum holding force 9,000 N Faster cycles through consistent pneumatic actuation The integrated pneumatic cylinder delivers a controlled actuation impulse with a rated 2,500 N actuation force, producing highly repeatable clamp strokes. This consistency reduces variation between cycles and supports faster machine throughput by replacing manual clamping steps with automated motion. The pneumatic drive is suitable for repeated cycling in production settings and simplifies process timing by providing a predictable clamp response. Secure retention combined with robust corrosion protection A substantial holding force of 9,000 N ensures components remain fixed under load, reducing rework and downtime due to part movement. The galvanised finish protects exposed steel surfaces from corrosion in standard workshop environments, extending service life and preserving clamp geometry for steady clamping accuracy. The compact 90° arrangement helps to position workpieces reliably while maintaining a small footprint on the fixture. Straightforward mounting and low-maintenance operation Fitted with a horizontal foot for direct fixture attachment, this clamp integrates easily into jigs and workholding plates without complex adapters. At approximately 5.59 kg, the unit offers a stable base while remaining manageable for installation or relocation within a production cell. Pneumatic actuation reduces operator exertion and wear on manual levers, contributing to low maintenance demands and consistent cycle performance over time. Contact Metav Werkzeuge for technical selection and dependable supply of Kukamet pneumatic toggle clamps; the Emmerich team will advise on integration, availability and suitable fixture arrangements. Technical Data Article number: 682-4 GTIN: 8680731505139 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Weight: 5.59 kg Cylinder force: 2,500 N Maximum holding force: 9,000 N Clamp angle: 90° Special features Material: galvanised With pneumatic cylinder Mounting: horizontal foot Category: Clamps FAQ What forces are specified for actuation and holding? The clamp provides an actuation (cylinder) force of 2,500 N and a maximum holding force of 9,000 N for the Kukamet pneumatic toggle clamp 682-4, indicating strong retention once engaged. How is the clamp mounted to a fixture? Mounting is by a horizontal foot configuration, allowing the unit to be bolted directly to jigs or workholding plates for a stable clamp interface. Does the finish protect against corrosion? The galvanised finish on the Kukamet unit offers enhanced corrosion resistance for workshop and industrial environments, helping to preserve function and service life. What pneumatic supply details are required? The clamp is pneumatically actuated; specific operating pressure and flow requirements depend on the application and should be taken from the product’s technical documentation for safe and efficient use. What routine maintenance is recommended? Regular inspection of pivot points and pneumatic fittings, plus periodic lubrication of moving joints, will help maintain clamping performance and prolong service intervals for the Kukamet pneumatic toggle clamp 682-4. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Pneumatic Push‑Rod Clamp Horizontal Foot, Zinc‑Plated Cast Body, 14 mm Piston - Kukamet
Take advantage of a compact, robust clamping unit with reliable pneumatic actuation and high holding capacity to keep production running smoothly. The combination of a zinc‑plated cast body, 2,500 N actuation thrust and 4,000 N holding force supports repeatable clamping in assembly and machining tasks. Order the unit directly via Metav Werkzeuge or ask the consultants for application advice. Kukamet 671 Pneumatic Push‑rod Clamp — pneumatic actuation, horizontal foot mounting The 671 pneumatic push‑rod clamp is a compact clamping device designed for secure, repeatable holding in assembly, fixture and workshop applications, fitted with a horizontal foot for straightforward installation. Pneumatic actuation, 2,500 N force 4,000 N holding force Zinc‑plated cast body Horizontal foot mounting Consistent clamping performance for series production A pneumatic clamping solution offers fast, repeatable strokes that reduce cycle times and increase throughput. The unit delivers 2,500 N of actuation thrust and a 4,000 N holding capacity, values that are relevant when stable part fixation is required during machining or assembly. The specified forces enable reliable restraint of workpieces while pneumatic control allows integration into automated sequences. This results in measurable productivity gains and fewer stoppages caused by loose or shifting parts. Compact installation with flexible mounting options Engineered for confined workspaces, the clamp’s horizontal foot facilitates direct mounting to machine tables, fixtures or jigs without complex adapters. At 1.25 kg, the compact mass minimises additional load on the fixture while maintaining structural rigidity. The small footprint combined with pneumatic actuation supports dense fixture layouts where several clamping units are used in parallel, improving workspace efficiency and simplifying fixture design. Durable construction for workshop environments Corrosion resistance is provided by the zinc‑plated cast body, which ensures long service life even under workshop conditions where coolant, chips and oils are present. The robust casing protects internal components and reduces maintenance intervals. The clamp is designed to withstand the mechanical demands of industrial use; as a result, downtime caused by component degradation is reduced and total cost of ownership is improved. Technical fit and simple integration The clamp uses a piston with a 14 mm diameter, a dimension that influences stroke stability and force transmission. Pneumatic control permits straightforward pressure adjustment and can be paired with the plant’s existing compressed‑air system. The unit is suitable for fixed fixtures and automated workstations where dependable actuation and mechanical holding are required. Where precision fixturing is needed, the described characteristics support predictable behaviour and easy commissioning. Contact Metav Werkzeuge for expert application advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 671-3-Q14 GTIN: 8680731503173 Manufacturer: Kukamet Facts Weight: 1.25 kg Piston diameter: 14 mm Actuation thrust: 2,500 N Holding force: 4,000 N eClass: 21041716 ETIM: EC011973 Special features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Clamping device / Spanner Suitable for integration into pneumatic systems FAQ What applications is this clamp suited for? The clamp is intended for assembly, fixture and light machining tasks; the Kukamet 671 pneumatic push‑rod clamp delivers fast actuation and reliable holding for repetitive production processes. How much force does the clamp produce and hold? Actuation thrust of the unit is 2,500 N and the maximum holding capacity is 4,000 N, values that ensure secure fixation in standard workshop applications. What are the installation requirements for the clamp? The horizontal foot design allows direct attachment to machine tables and fixtures; pneumatic supply and basic mounting hardware are required for commissioning. Is the body corrosion‑resistant? Yes, the clamp features a zinc‑plated cast body which provides enhanced resistance to workshop environments and reduces maintenance frequency. Which piston diameter is used and why does it matter? The piston diameter is 14 mm; this influences stroke stability and force transmission, helping to ensure consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp 12 mm Piston Diameter Horizontal Foot Zinc-Plated Cast Body, 3700 N Hold Force - Kukamet
Taking advantage of 2,500 N clamping force and a zinc‑plated cast body, the unit offers dependable fixture performance and long service life; secure the Pushrod clamp directly via Metav Werkzeuge or contact their consultants for tailored advice. Pushrod clamp 536 by Kukamet — 2,500 N clamping force, zinc‑plated cast body The Pushrod clamp 536 is a compact rod clamping unit designed for horizontal mounting in workshop fixtures and jigs, combining compact mass with robust holding characteristics for repetitive production use. 2,500 N maximum clamping force 3,700 N holding capacity Zinc‑plated cast body for durability Horizontal foot for secure mounting Robust clamping for consistent production results The clamping unit delivers a clear technical advantage through its 2,500 N maximum clamping force paired with a 3,700 N holding capacity, ensuring stable fixation during machining and assembly operations. These values describe the active push force and the passive retention the device can provide; the higher holding capacity reduces the risk of workpiece shift under shock loads. The combination of force ratings supports short cycle times and predictable fixture behaviour, which can translate into fewer rejects and more consistent downstream processing. Compact construction that simplifies integration Engineered for easy installation, the clamp features a horizontal foot mounting style and a lightweight construction of 0.59 kg, helping to keep fixture mass low and maintain machine dynamics. The zinc‑plated cast body offers corrosion resistance and mechanical stiffness, reducing deformation under load and extending service intervals. A 12 mm piston diameter and an M8x50 pressure spindle enable fine adjustment of clamp travel and contact pressure, making the component suitable for precise positioning tasks without bulky ancillary parts. Designed for workshop and fixture applications As a dedicated clamping element for jigs and assembly fixtures, the rod clamp provides reliable repeatability and straightforward mechanical operation. The compact profile facilitates use in stacked or multi-point clamping arrangements where space is limited; only minimal additional hardware is required for secure attachment. The robust finish and cast construction support longevity in production environments, while the clear technical specs allow planning for lifecycle and maintenance routines based on measurable performance criteria. Contact Metav Werkzeuge today for expert guidance and to reserve the Pushrod clamp 536 (SKU 536-3-Q12) from stock in Emmerich for immediate fixture upgrades Technical data SKU: 536-3-Q12 GTIN: 8682843521250 eClass: 21041716 ETIM: EC011973 Measured values Maximum clamping force: 2,500 N Holding capacity: 3,700 N Piston diameter: 12 mm Weight: 0.59 kg Materials & features Zinc‑plated with cast body Horizontal foot mounting Pressure spindle: M8x50 Category: Clamps / Spanner FAQ What clamping and holding forces does the unit provide? The Pushrod clamp 536 offers a maximum clamping force of 2,500 N and a holding capacity of 3,700 N, values that support secure fixation in jigs and fixtures. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, allowing the rod clamp to be fastened to plate or fixture bases for stable lateral fixation. What material and finish does the product have? The unit features a zinc‑plated, cast body, giving corrosion resistance and structural rigidity suitable for workshop environments. Which adjustment elements are supplied? The clamp is equipped with a M8x50 pressure spindle and a 12 mm piston diameter, enabling controlled contact pressure and precise clamping travel. What is the item weight and how does that affect fixture design? The clamp weighs 0.59 kg, supporting low overall fixture mass and easier handling during assembly planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp 14 mm Piston, Zinc Coated Cast Body, 4000 N Hold Force - Kukamet
Benefit from a robust combination of zinc-plated cast construction, a high holding force of 4,000 N and a compact 0.61 kg mass for reliable, repeatable clamping in production fixtures. Order the pushrod clamp directly via Metav Werkzeuge or ask the consultants for application advice if needed. 532 pushrod clamp by Kukamet — zinc-plated cast body, 4,000 N holding force The 532 pushrod clamp is a compact clamping element designed for industrial fixturing and repetitive assembly tasks, offering a low-mass solution with a horizontal-foot mounting for stable integration. Zinc-plated cast body for industrial durability Holding force up to 4,000 N Compact weight, only 0.61 kg Horizontal-foot mounting for stable installation Consistent clamping for high-throughput processes The clamp delivers a clear separation between actuation and retention: a pressing force of up to 2,500 N provides reliable actuation while the holding force of 4,000 N secures the workpiece during machining or assembly. The device uses an M8x50 pressure spindle together with a 14 mm piston, which translates limited operator movement into steady clamping pressure. This mechanical ratio reduces cycle-time variability and supports repeatable positioning on automated jigs, improving process stability and lowering rejection rates. The design rationale is focused on long-term productivity gains through dependable mechanical performance. Integrates easily into fixtures and jigs A horizontal-foot mounting simplifies installation on plates and modular fixture systems, allowing the clamp to be fastened flush and aligned with existing tooling. At 0.61 kg, the unit is deliberately lightweight, which reduces added inertia on moving assemblies and supports compact fixture design. The compact footprint and standardised spindle thread make retrofitting straightforward in both manual and semi-automated lines. These attributes increase layout flexibility and help maintain short set-up times, which contributes to a smoother production flow and reduced machine downtime. Built to last with low maintenance needs Constructed from a zinc-plated finish and a cast body, the clamp resists corrosion and mechanical wear common in workshop environments. The robust materials and simple mechanical actuation ensure low maintenance frequency and straightforward service when required. The 14 mm piston diameter and the solid mounting arrangement contribute to long contact life, making the component suited to repetitive clamping cycles. This durability reduces the total cost of ownership by decreasing replacement intervals and preserving fixture accuracy over time. Contact Metav Werkzeuge to discuss the 532 pushrod clamp for your fixtures, request application advice and arrange assured delivery from Emmerich. Technical Data Article number: 532-3-Q14 Manufacturer: Kukamet GTIN: 8680731504453 ECLASS: 21041716 ETIM: EC011973 Facts Holding force: 4,000 N Max pressing force: 2,500 N Piston diameter: 14 mm Weight: 0.61 kg Pressure spindle: M8x50 Special features Material: zinc-plated with cast body Mounting: horizontal foot Design: lever clamp style FAQ What is the difference between holding force and pressing force? The holding force refers to the clamp’s ability to keep a workpiece secured (4,000 N), while the pressing force (2,500 N) indicates the actuation power delivered by the spindle; the 532 pushrod clamp uses the pressing action to achieve the higher holding result. Can this clamp be used in automated fixture systems? Yes, the combination of an M8x50 pressure spindle, compact mass and horizontal-foot mounting makes the 532 suitable for integration into semi-automated and automated jigs and fixtures. Which mounting method is required for installation? A horizontal-foot mounting is specified for stable fastening; the clamp is designed to be bolted directly to plates or fixture modules. How does the zinc-plated cast body help in workshop environments? The zinc-plated surface and cast construction protect against corrosion and wear, extending service life in industrial conditions. What are the essential dimensions to consider for layout planning? Key dimensions include the 14 mm piston diameter and the M8x50 pressure spindle thread; weight and mounting type should also be factored into fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp Horizontal Foot Zinc-Plated, 2640 N Holding Force - Kukamet
Take advantage of a compact, robust clamping solution that combines a galvanised finish, a 2,500 N maximum clamping capacity and a practical horizontal-foot design for stable fixture integration; order through Metav Werkzeuge or request tailored advice from our consultants for specification matching. Rod clamp 511 — horizontal-foot clamp, galvanised finish by Kukamet The Rod clamp 511 is a compact horizontal-foot clamping element designed for secure holding in assembly jigs and fixture setups where space and reliable repeatability matter most. Galvanised corrosion protection Max clamping force 2,500 N Horizontal foot for stable mounting Compact weight 0.49 kg Secure force and clear technical performance for reliable fixtures The 511 combines a defined maximum clamping force of 2,500 N with a holding force of 2,640 N, making it suited to repetitive operations where consistent pressure is required. The clamping element includes a pressure spindle sized M8 x 50, which allows fine adjustment of contact pressure and straightforward integration into existing jigs. The galvanised surface treatment resists corrosion in workshop environments and reduces the need for frequent replacement, while the modest mass (0.49 kg) keeps moving masses low and contributes to safer, predictable fixture dynamics. These measurable parameters provide a clear basis for fixture design decisions and support effective process planning. Fast integration and durable operation to keep production moving Fitted with a horizontal foot, the clamp mounts directly to flat surfaces for a low-profile installation that saves vertical space and preserves access to the workpiece. The geometry supports stable mounting and reduces vibration transfer during clamping cycles. The simple design avoids complicated maintenance: lubricate the moving parts periodically and check the spindle engagement; the galvanised finish reduces corrosion-related wear. Because adjustment is made via a standard spindle thread, replacement parts and adjustments follow conventional workshop practice, shortening downtime and simplifying stock keeping for spares. Practical applications and confidence in everyday use This clamp is engineered for assembly, welding jigs, small-batch fixtures and maintenance work where reliable holding and repeatable positioning are required. The robust construction ensures repeatability and a long service life, while the compact form factor allows use in confined fixture arrangements. Buyers benefit from the product’s transparent technical attributes when planning tooling layouts: quantified forces, standard spindle dimensions and a mounting style that is easy to model into CAD assemblies. If further data is required for integration, Metav’s technical team can assist with drawings and compatibility checks to support a smooth installation. Contact Metav Werkzeuge for a precise recommendation on the Kukamet rod clamp 511 or to request technical drawings and application advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 511-3 GTIN: 8680731502626 Manufacturer: Kukamet Core measurements Max clamping force: 2,500 N Holding force: 2,640 N Weight: 0.49 kg Pressure spindle: M8 x 50 mm eClass: 21041716 ETIM: EC011973 Features and materials Galvanised finish Horizontal foot mounting No special additional features indicated Category: Spanner FAQ What maximum clamping force does the clamp provide? The rod clamp 511 delivers a maximum clamping force of 2,500 N and a holding force of 2,640 N for secure fixture use. How is the clamp mounted to a fixture? Mounting is via the horizontal foot; the clamp 511 is designed for bolting to flat surfaces to provide a low-profile, stable attachment in jigs and fixtures. Which spindle is used for pressure adjustment? Adjustment is performed with the pressure spindle specified as M8 x 50, allowing precise contact pressure control and easy replacement with standard hardware. Is the surface treated against corrosion? Yes, the clamp is supplied with a galvanised finish that improves resistance to corrosion in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Holding / 2000N Clamping Vertical Clamp With Safety Lock, Stainless Steel - Kukamet
Reliable clamping with a compact footprint and a secure safety lock supports consistent production flow; stainless steel construction and robust holding capability from 2,500 N ensure long-term stability. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 — Kukamet vertical clamp with safety lock, stainless steel Vertical clamp 212 combines corrosion-resistant construction and a safety latch for reliable workholding in jigs, fixtures and repetitive workshop tasks. Stainless steel construction Safety lock for secure clamping Max holding force 2,500 N Vertical-foot mounting Reliable force for repeatable clamping cycles The clamp delivers a clearly defined 2,000 N clamping force with a 2,500 N holding capacity, ensuring consistent performance across repeated cycles. Such predictable figures reduce setup variability and help maintain process quality on production lines. The lever-style actuation provides quick engagement and release, which shortens cycle times and improves throughput for repetitive tasks. The mechanical design focuses on efficiency and measurable results, supporting rational purchasing decisions for process stability. Corrosion resistance for workshop and light industrial use Constructed from stainless steel, this workholding device resists moisture and workshop contaminants, extending service life and reducing maintenance frequency. A corrosion-resistant body means less downtime for part replacement and a lower total cost of ownership over time. The material choice also suits applications where cleanliness is important or where components are exposed to oil and cutting fluids. The robust finish supports dependable function in demanding environments. Space-saving mounting with precise pressure control The vertical foot mount keeps the footprint small and simplifies integration into existing fixtures and tooling plates. The integrated M8x50 pressure spindle allows fine adjustment of contact pressure and reach, enabling accurate alignment and secure grip without additional adapters. At just 0.415 kg, the unit is light enough for compact assemblies yet rigid enough to maintain clamping accuracy. These attributes make the clamp suitable for confined setups where space economy and reliable contact are priorities. Built-in safety and straightforward compatibility A mechanical safety lock secures the clamping position once engaged, preventing accidental release during handling or vibration. The design is lever-operated and does not include a swing arm, which simplifies fitting into custom fixtures. Classification codes such as ECLASS 21041717 and ETIM EC011973 facilitate procurement and cataloguing in industry systems. The combination of safety features and standardised identifiers supports compliance and easier parts management on the shop floor. For precise delivery information, technical clarification or to request a tailored quotation for the Kukamet vertical clamp 212 (SKU S212-3-L), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S212-3-L GTIN: 8680731509236 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.415 kg Max clamping force: 2,000 N Max holding force: 2,500 N Pressure spindle: M8x50 Special features Material: stainless steel Mounting: vertical foot Safety lock included No arm (not applicable) Lever-type clamp FAQ Is the clamp suitable for corrosive environments? Yes. The Kukamet vertical clamp 212 is made from stainless steel, offering corrosion resistance suitable for workshop and light industrial settings (SKU S212-3-L). What are the clamping and holding forces? The device provides a clamping force of 2,000 N and a holding force of 2,500 N, values that support secure workholding in repetitive operations. How is the clamp mounted and adjusted? Mounting is via a vertical foot; adjustment is possible with the M8x50 pressure spindle supplied with the clamp. Does the clamp include a safety feature to prevent accidental release? Yes. A mechanical safety lock secures the clamp in its engaged position to reduce the risk of unintended opening. Can this clamp be used with a swing arm or is it fixed? This model is designed with a vertical-foot mounting and does not include a swing arm; it is intended for fixed installations and fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Holding Force 2000N Clamping Force Vertical Clamp With Safety Lock, Galvanised - Kukamet
Reliable production benefits from the combination of galvanised construction, a safety lock and a 2.5 kN holding capacity, ensuring consistent clamping performance and low maintenance. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants for application advice and stock availability. Kukamet 212 Vertical Clamp — Safety Lock, 2.5 kN Holding Force The 212 vertical clamp is a compact lever clamp for upright mounting, engineered to secure components in fixtures and jigs for general workshop and production use. Safety lock for secure clamping Vertical base for upright mounting Galvanised steel construction Holding force 2.5 kN, clamping force 2.0 kN Consistent clamping power that speeds up workflows The vertical lever device delivers predictable results through a clear separation of functions: a 2.0 kN clamping force for workpiece engagement and a 2.5 kN holding force for retention. The built-in safety lock prevents accidental release during processing, reducing stoppages and rework. The adjustable spindle (M8x50) allows fine correction of clamp travel, ensuring repeatable positioning without complex setup. This combination supports higher throughput and reduces cycle-time variability in repetitive tasks. Durable, low-maintenance construction for long service life Constructed from galvanised steel, the clamp resists corrosion and maintains surface integrity in workshop environments. The lightweight body (approx. 0.415 kg) minimises added mass on fixtures while preserving structural stability, making it suitable for modular jigs and transportable setups. Galvanisation extends service intervals and lowers total cost of ownership, since routine maintenance is limited to occasional lubrication and inspection of the locking mechanism. Simple integration into fixtures and machines The clamp’s vertical base is designed for upright mounting on tooling plates and frames, saving horizontal space and aligning the clamping force with gravity for secure hold-down. The M8x50 contact spindle provides a standard interface for many fixtures; it can be exchanged or adjusted to suit varying workpiece heights. The compact footprint and standardised connections make this lever clamp an effective solution for automated assembly stations as well as manual workbenches. Operator safety and process reliability combined A mechanical interlock with visible engagement ensures the clamp remains locked under load, improving safety for operators and downstream processes. The straightforward mechanism reduces potential failure modes compared with more complex pneumatic systems, and the galvanised finish protects moving parts against early wear. For manufacturers seeking dependable manual or semi-automatic clamping, this lever clamp delivers a balance of safety, repeatability and easy inspection. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 212 vertical clamp into production fixtures or for immediate supply from our Emmerich warehouse Technical data Article number: 212-3-L GTIN: 8680731501650 Manufacturer: Kukamet SKU: 212-3-L Facts Weight: 0.415 kg Holding force: 2500 N (2.5 kN) Clamping force: 2000 N (2.0 kN) Contact spindle: M8x50 ECLASS: 21041717 ETIM: EC011973 Special features Material: galvanised steel Mounting: vertical base (upright foot) Safety lock: yes Application: lever clamp for fixtures and jigs FAQ How much clamping and holding force does the clamp provide? The Kukamet 212 vertical clamp offers a clamping force of 2.0 kN and a holding force of 2.5 kN, suitable for light to medium-duty fixture applications. Is the spindle adjustable or replaceable? Yes, the contact spindle is M8x50, allowing adjustment for workpiece height and replacement with compatible M8 parts. Can this clamp be used in corrosive workshop environments? The galvanised steel construction of the 212 provides enhanced corrosion resistance for standard workshop conditions and reduces the need for frequent surface maintenance. What mounting method is required for installation? The clamp is designed for upright mounting on a vertical base; the vertical foot simplifies integration into plates and frames used in fixtures. Does the clamp include a safety feature to prevent accidental release? The device is fitted with a safety lock that secures the lever in the clamped position to prevent unintended opening during machining or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Horizontal Clamp With Hook, 41mm Thread Length, Black Oxide Finish - Kukamet
Take advantage of the combination of secure holding force, a compact horizontal mounting, and a corrosion-resistant finish for reliable part retention and fast cycle times. Order the toggle latch clamp directly via Metav Werkzeuge or ask our consultants for application support. Toggle latch clamp 411 by Kukamet — horizontal base, hook-equipped, blackened finish Toggle latch clamp 411 is a lever-operated closure clamp designed for stable fixture mounting and dependable retention in production and assembly applications. Horizontal base for stable mounting Holding force up to 2,500 N Closing force 2,000 N Blackened finish resists corrosion Precise, measurable clamping for repeatable processes The Toggle latch clamp 411 delivers defined mechanical performance that supports reproducible set-ups on jigs and fixtures. With a holding force of up to 2,500 N and a closing force of 2,000 N, the device ensures workpieces remain secure during machining, assembly or transport operations. The clearly specified forces allow planners to calculate safety margins and fixture designs with confidence, reducing rework and downtime through predictable behaviour. Compact mounting that speeds up integration Fitted with a horizontal base, the clamp offers a compact footprint that simplifies installation on flat fixture plates and rails. The integrated hook ensures quick engagement and a positive lock without complex alignment steps. This design shortens setup times and lowers cycle variability, which improves overall throughput. The low mass (0.325 kg) contributes to reduced load on moving fixtures while maintaining robust performance. Durable finish and material choice for workshop environments The blackened finish provides an economical layer of surface protection that helps resist corrosion in standard workshop atmospheres and keeps the clamp looking uniform over repeated use. Combined with its solid lever mechanism, the latch is engineered for regular operation with low maintenance requirements. The result is a pragmatic, long-lived clamping solution that supports continuous production without unnecessary complexity. Contact Metav Werkzeuge for tailored technical advice on Kukamet toggle latch clamps and reliable supply; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B411-3 GTIN: 8680731508611 ECLASS: 21041718 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 0.325 kg Closing force: 2,000 N Holding force: 2,500 N Thread length: 41 mm Special features Horizontal base mounting Hook-equipped latch Blackened finish Category: Clamps / Toggle latch FAQ What load capacities can be expected from this clamp? The Kukamet toggle latch clamp 411 offers a closing force of 2,000 N and a holding force up to 2,500 N, values intended for planning secure retention in fixtures and transport applications. How is the clamp mounted to a fixture plate? Mounting uses the horizontal base, allowing the clamp to be fastened directly to flat plates or rails; the compact base supports simple integration into existing jig layouts. Is the finish suitable for industrial workshops? The blackened finish provides corrosion resistance appropriate for typical workshop conditions and helps maintain consistent surface appearance over repeated use. Does the clamp include a hook or striker? Yes, the model is delivered with an integrated hook for immediate engagement and positive locking during operation. Which applications suit this latch clamp best? The device is suited to assembly, small-series production and transport securing where a compact, repeatable clamping action with defined forces is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pneumatic Pushrod Clamp 14mm Piston, 3200N Holding Force, Zinc-Plated - Kukamet
Take advantage of a compact, mechanically robust clamp that combines pneumatic actuation with a high holding force, ensuring repeatable clamping cycles and stable fixture performance on the shop floor. Order the clamp via Metav Werkzeuge or consult their specialists for integration advice. Pneumatic Push‑rod Clamp 621 – Kukamet | 2.5 kN thrust, horizontal foot The Pneumatic Push‑rod Clamp 621 is a compact pneumatic clamp designed for industrial jigs and fixtures where consistent linear thrust and secure holding are required. Robust galvanised construction Maximum thrust 2,500 N Holding force up to 3,200 N Consistent linear force for automated clamping The 621 delivers a dependable thrust of 2,500 N and a holding force of 3,200 N, values that support repeatable clamping in short-cycle production and machining setups. Pneumatic actuation converts compressed-air pressure into a straight push motion via a piston Ø 14 mm, providing precise linear displacement with minimal mechanical backlash. For procurement and process planning, these figures translate into predictable clamp behaviour during pick-and-place operations, transfer systems and stationary fixtures, reducing rejects caused by inconsistent clamping. Space-saving mounting and corrosion resistance Thanks to the horizontal foot mounting the unit installs neatly on fixture plates or machine beds without extending the assembly height. The galvanised finish offers basic corrosion protection suitable for industrial environments, while the clamp’s compact mass of 1.31 kg keeps added inertia low on moving sub‑assemblies. Together, these attributes enable denser fixture layouts and easier retrofitting of existing tooling, improving floor-space efficiency and simplifying mechanical integration. Low-maintenance reliability for continuous use Engineered for industrial use, the clamp’s simple pneumatic mechanism limits wear points and facilitates straightforward maintenance routines. The galvanised components reduce the frequency of surface corrosion checks, and the linear push‑rod concept avoids complex linkages, lowering lifecycle service effort. In practice, this means fewer unscheduled stops and a clearer maintenance schedule, supporting higher equipment availability and predictable production throughput. Identification and procurement made practical The clamp is listed under SKU 621-3-Q14 and GTIN 8680731502954, with classification codes ECLASS 21041716 and ETIM EC011973, which helps in ERP ordering and parts management. The technical numbers — 2,500 N thrust, 3,200 N holding force, piston Ø 14 mm, and weight 1.31 kg — allow engineers and buyers to verify compatibility with pneumatic supply, valve sizing and fixture load requirements before procurement. The clear identification streamlines spare-parts logistics and supports traceable purchasing for long-term asset management. For reliable, repeatable clamping solutions based on Kukamet technology, contact Metav Werkzeuge to discuss the Pneumatic Push‑rod Clamp 621 and suitability for specific fixtures or automated cells. Technical data Article number: 621-3-Q14 GTIN: 8680731502954 Manufacturer: Kukamet ECLASS: 21041716 ETIM: EC011973 Facts Maximum thrust: 2,500 N Maximum holding force: 3,200 N Piston diameter: 14 mm Weight: 1.31 kg Special features Galvanised finish Horizontal foot mounting Compact design for fixture integration FAQ What clamping force does the Pneumatic Push‑rod Clamp 621 provide? The Pneumatic Push‑rod Clamp 621 offers a maximum thrust of 2,500 N and a holding force of 3,200 N suitable for many industrial fixture applications. What mounting style does the clamp use and how does it save space? The clamp features a horizontal foot mounting that enables low-profile attachment to plates and machine beds, optimising fixture density and reducing overall assembly height. Which material resists corrosion on this clamp? The clamp is finished galvanised, providing basic corrosion resistance appropriate for general industrial environments. What are the key procurement identifiers for this clamp? Relevant identifiers include SKU 621-3-Q14, GTIN 8680731502954, ECLASS 21041716 and ETIM EC011973 to assist in ERP systems and spare-parts management. Is the clamp suitable for automated production cycles? Yes, the pneumatic linear actuation and compact design make the clamp well suited to repeated, short-cycle clamping in automated cells and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pneumatic Pushrod Clamp Horizontal Base, 14mm Piston Dia, 3200N Hold Force, Zinc Plated - Kukamet
Take advantage of the combination of high clamping and holding forces, compact construction and corrosion-resistant zinc plating for reliable fixture performance. Order the Pneumatic push-rod clamp 662 directly via Metav Werkzeuge or contact the advisors for application-specific guidance. Pneumatic push-rod clamp 662 — 2.5 kN clamping force, zinc-plated A 662 pneumatic push-rod clamp designed for secure, repeatable workholding in industrial fixturing and assembly applications 2.5 kN pneumatic clamping force 3.2 kN holding force for secure fixturing Zinc-plated corrosion-resistant finish Faster, more consistent clamping for productive workflows The pneumatic push-rod clamp delivers a clamping force of 2,500 N combined with a holding force of 3,200 N, ensuring consistent contact pressure during machining and assembly. The compact actuator, driven by a 14 mm piston, provides fast response times and repeatable strokes for short-cycle production. This results in reduced setup time, fewer rejected parts and more predictable process capability. The zinc-plated surface adds an element of corrosion resistance that helps maintain clamp performance over repetitive cycles, reducing the frequency of component replacement and downtime. Reliable construction that supports continuous operation Constructed with a sturdy mounting arrangement and an integrated horizontal foot, the clamp provides a low-profile footprint that is simple to fit into existing fixtures. With a net weight of approximately 1.026 kg, the component balances robustness and ease of handling during installation. The combination of compact dimensions and proven actuator technology supports long-term stability under industrial loads, making the clamp well suited to repetitive operations where secure workholding is essential. If additional technical details are required for integration, Metav’s technical consultants can be consulted for specification matching. Easy integration into clamping systems and diverse applications The design prioritises straightforward mounting and dependable force transmission, enabling secure fixturing for a variety of materials and operations. The clamp’s horizontal mounting and compact piston allow integration in machining, assembly and testing jigs where space is limited but reliable restraint is critical. Clear, measurable performance values—2,500 N clamping and 3,200 N holding—support objective selection during planning and help justify fixture choices within production engineering specifications. The robust finish and compact mass make the component suitable for series production environments that demand durability and repeatable results. For secure, high-force pneumatic clamping choose the Kukamet 662 via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and order handling Technical data Article number: 662-3-Q14 GTIN: 8682843521694 Manufacturer: Kukamet Material: Zinc-plated Mounting: Horizontal foot Core specifications Clamping force: 2,500 N Holding force: 3,200 N Piston diameter: 14 mm Weight: 1.026 kg eClass: 21041716 ETIM: EC011973 Additional features Category: Clamps SKU: 662-3-Q14 Asset: product image and catalogue sheet available FAQ What clamping and holding forces does the clamp provide? The Kukamet pneumatic push-rod clamp 662 provides a clamping force of 2,500 N and a holding force of 3,200 N. Which piston diameter is used in this actuator? The actuator uses a 14 mm piston; this compact diameter enables quick actuation and repeatable strokes in confined fixtures. Is the clamp suitable for corrosive workshop environments? The clamp has a zinc-plated finish for enhanced corrosion resistance, suitable for standard workshop conditions and environments where surface protection is beneficial. How is the clamp mounted in a fixture? The clamp features a horizontal foot for secure mounting; the low-profile arrangement supports integration into machining and assembly jigs. Which SKU should be referenced when ordering or enquiring? Reference SKU 662-3-Q14 when ordering or requesting technical details for the Kukamet pneumatic push-rod clamp Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pneumatic Push‑Rod Clamping Cylinder 14mm Piston, 4000N Hold Force, Zinc Plated Cast Body - Kukamet
The compact design and robust construction deliver reliable, repeatable clamping with 2,500 N clamping force and a galvanised cast body, ensuring long service life in production fixtures; order the pneumatic push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic push-rod clamp 641 by Kukamet — 2,500 N clamping force, horizontal foot mounting Pneumatic push-rod clamp 641 is a compact industrial clamp for fast, repeatable clamping in jigs and fixtures, suited to automated and semi-automated production environments. 2,500 N clamping force 4,000 N holding capacity Galvanised cast body Horizontal foot mounting Reliable force and predictable performance for series production Engineered for consistent operation, this clamp provides 2,500 N clamping force with a 4,000 N holding capacity, allowing stable fixture retention during machining and assembly. The combination of a piston Ø 14 mm and a compact actuator stroke translates into fast cycle times and reduced fixture downtime. The device’s specification emphasises measurable performance: cycle consistency reduces part rework and contributes directly to higher throughput. Where process reproducibility is a priority, the mechanical design supports integration into pneumatic circuits, making the unit suitable for both manual and automated clamping stations. Engineers benefit from clear, numeric performance data when designing clamping layouts. Durable construction for workshop and light industrial use A galvanised cast body provides corrosion resistance and structural stiffness, while the total weight of 1.55 kg keeps the component compact for space-constrained fixtures. The surface finish protects the housing in humid or industrial environments, and the cast construction resists deformation under repeated load. This durability minimises maintenance intervals and supports predictable life-cycle costs. When compared with lighter-sheet designs, the solid cast body reduces the risk of bend or misalignment under lateral loads, preserving tool contact geometry and part quality over extended production runs. Practical mounting and low-maintenance operation Fitted with a horizontal foot mounting, the clamp is straightforward to attach to plates and fixtures, enabling standardised placement and easy replacement in modular tooling systems. Pneumatic operation keeps moving parts simple and serviceable; routine maintenance is limited to standard pneumatic checks and occasional lubrication where specified. The clamp’s straightforward mechanics reduce the need for specialised service skills, which is advantageous for shops seeking dependable performance with minimal downtime. For complex installations or bespoke fixture concepts, Metav Werkzeuge’s technical advisors can provide integration advice and parts matching. For ordering, integration advice or to discuss Kukamet clamp variants, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com — request the 641 series via Metav Werkzeuge for dependable supply and expert guidance. Technical Data Article number: 641-3-Q14 SKU: 641-3-Q14 GTIN: 8680731503043 Manufacturer: Kukamet Facts Clamping force (max): 2,500 N Holding capacity (max): 4,000 N Piston diameter: 14 mm Weight: 1.55 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: galvanised with cast body Mounting: horizontal foot Category: clamps Asset: catalogue PDF and image available FAQ What clamping and holding forces does this clamp provide? The pneumatic push-rod clamp 641 from Kukamet offers a maximum clamping force of 2,500 N and a holding capacity of 4,000 N, giving a clear performance envelope for fixture design. Is the clamp suitable for automated production lines? Yes, the 641 is designed for integration into pneumatic circuits and automated fixtures; its repeatable actuation suits cyclical production and indexed stations. What materials and environments is the clamp designed for? The clamp features a galvanised cast body, making it appropriate for workshop and light industrial environments where corrosion resistance and structural rigidity are required. How is the clamp mounted in a fixture? The unit uses a horizontal foot mounting, allowing secure attachment to base plates and modular fixture systems; the mounting type simplifies replacement and standardisation. What routine maintenance is required? Maintenance is limited to standard pneumatic system checks and recommended lubrication points; the solid construction reduces the frequency of mechanical service. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Push Rod Clamp 14mm Piston Dia, Horizontal Foot, Zinc-Plated Cast Body, 4000N Holding Force - Kukamet
Take advantage of the combination of 4,000 N holding force, a zinc‑plated cast body and a compact 0.61 kg mass for dependable clamping in jigs and fixtures; order the 536 push‑rod clamp directly via Metav Werkzeuge or consult our specialists for integration advice. 536 Push‑rod Clamp »536-3-Q14« – Horizontal base, 4,000 N holding force (Kukamet) The 536 push‑rod clamp delivers compact, high‑force clamping for production fixtures and workshop jigs, mounted via a horizontal base for stable positioning. 4,000 N maximum holding force 2,500 N maximum pressing force Zinc‑plated cast body for corrosion resistance Horizontal base mounting for stable installation M8×50 pressure spindle included Consistent high clamping performance for production use The clamp offers a maximum holding force of 4,000 N and a maximum pressing force of 2,500 N, making it suitable for repetitive fixture operations where precision retention is essential. These figures denote the device’s capability to maintain component position under load and to apply a reliable press action during assembly or machining. The combination of measurable force ratings and a defined piston diameter of 14 mm supports process planning and simplifies cycle time calculations, helping engineers specify the right clamp for medium‑duty applications without over‑engineering fixtures. Space‑saving design that eases fixture layout Weighing only 0.61 kg, the clamp brings high force density to confined clamp stations and multi‑point fixture arrays. The compact footprint afforded by the horizontal base means fewer clashes with adjacent tooling and easier routing of jig components. For fixture designers, the reduced mass lowers inertial loads during automated handling, while the clear mechanical design aids repeatable placement and quick retrofitting into existing plates. The clamp’s geometry supports tight packing of multiple clamps where several datum points are required. Durable construction and straightforward mounting Constructed with a zinc‑plated cast body, the unit resists corrosion in workshop environments while retaining the rigidity required for secure clamping. The horizontal base mounting simplifies installation on plates or beam fixtures and is compatible with standard shop drilling patterns. An included M8×50 pressure spindle allows fine adjustment of the contact point and clash compensation on uneven workpieces. All mechanical connections are designed for industrial use, enabling predictable life cycles and reduced maintenance intervals compared with lightweight alternatives. Practical applications and safe operation guidance This clamp is intended for jigs, assembly fixtures and light machining fixtures where repeatable holding is required. Typical uses include positioning small components for drilling, tapping and inspection without loss of datum. Safe operation is supported by the defined force values and fixed mounting; nevertheless, correct fixture design and regular inspection of the spindle and mountings are recommended to maintain performance and avoid unintended loosening. The robust construction also makes the clamp suitable for serial production environments where tool reliability reduces downtime. Contact Metav Werkzeuge today to specify the Kukamet 536 push‑rod clamp for fixture projects; the Emmerich team will advise on integration and supply the SKU 536-3-Q14 directly Technical data SKU: 536-3-Q14 GTIN: 8682843521267 Manufacturer: Kukamet Numeric data Weight: 0.61 kg Maximum holding force: 4,000 N Maximum pressing force: 2,500 N Piston diameter: 14 mm Materials & features Zinc‑plated with cast body Horizontal base mounting Pressure spindle M8×50 ECLASS: 21041716 ETIM: EC011973 FAQ What maximum holding and pressing forces does the clamp provide? The Kukamet 536 push‑rod clamp provides a maximum holding force of 4,000 N and a maximum pressing force of 2,500 N, suitable for medium‑duty fixture tasks. How is the clamp mounted in a fixture? Mounting is via the horizontal base; the clamp is secured to fixture plates or beams, enabling stable installation for jigs and assembly fixtures. What materials and surface finish does the clamp have? The clamp features a zinc‑plated cast body, combining rigidity with corrosion resistance for workshop environments. Is an adjustable spindle included and what size is it? Yes; the unit includes an M8×50 pressure spindle to allow precise contact adjustment and compensation for workpiece variances. Which applications are most suitable for this clamp? Best suited for jigs, assembly fixtures and light machining fixtures where repeatable holding and compact installation are required; the clamp’s defined force ratings support predictable fixture performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Push Rod Clamp Vertical Base, Zinc Plated, Holding Force 2640N - Kukamet
Take advantage of a compact, galvanised clamp that delivers reliable holding with a 2,500 N rated clamping force and a 2,640 N holding force, keeping components secure in repetitive production. Order the Kukamet 512 push‑rod clamp directly via Metav Werkzeuge or consult our specialists for fixture integration and supply solutions. Kukamet 512 Push‑rod Clamp — galvanised, 2.5 kN clamping force A robust 512 push‑rod clamp engineered for fixture workholding, offering vertical‑foot mounting for stable installation in jigs and assembly fixtures. Galvanised finish for corrosion resistance Clamping force up to 2,500 N Holding force rated 2,640 N Vertical-foot mounting with M8x50 spindle Secure holding for repetitive production cycles The galvanised construction provides long‑term corrosion protection while the nominal clamping force of 2,500 N ensures workpieces remain immobile during machining or assembly. This robustness reduces rework and scrap by keeping tolerances stable throughout series production. The combination of a strong applied force and a rated holding force of 2,640 N creates a safety margin that is relevant where vibration or intermittent loads occur, supporting consistent process quality and fewer stoppages. Simple integration into existing fixtures Mounting is straightforward thanks to the vertical-foot design and the M8x50 spindle, which facilitates secure attachment to fixture plates and jigs. The compact geometry allows the clamp to be positioned close to the workpiece without obstructing tools or operators, promoting efficient setup. Where quick interchangeability and repeatable positioning are required, the clamp’s form factor streamlines retrofit into modular systems and reduces setup times at the start of each production run. Low mass, high durability for daily workshop use At 0.49 kg, the unit imposes minimal additional load on moving fixtures and contributes little to cycle inertia, while the zinc plating withstands workshop environments. Mechanical simplicity means fewer wear parts and straightforward preventative maintenance: periodic inspection and lubrication preserve clamping performance. The galvanised finish plus solid mechanical design make this solution suited to profiled jigs, light assembly lines and repetitive clamping tasks where uptime matters. Fit for diverse metalworking and assembly tasks Designed for general clamping technology applications, the clamp performs well in small‑batch manufacturing, prototyping and production testing. Its specification supports use with steel and aluminium components in milling, drilling and fitting operations. The robust specification and compact dimensions place it as a pragmatic choice for workshops seeking a reliable lever‑style clamping element that balances performance with ease of handling and integration. Discuss mounting options and availability with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and dependable supply from Emmerich Technical data Article number: 512-3 GTIN: 8680731502671 Manufacturer: Kukamet Facts Weight: 0.49 kg Clamping force (max): 2,500 N Holding force (max): 2,640 N Spindle: M8x50 Special features Material: galvanised steel Mounting: vertical foot Type: push‑rod / lever clamp Category: Spanner eClass: 21041716 ETIM: EC011973 FAQ What is the main application of the 512 push‑rod clamp? The 512 push‑rod clamp is intended for fixture and workholding tasks in assembly and machining, delivering secure clamping where repeatability is required. How is the 512 push‑rod clamp mounted to a jig plate? Mounting uses the vertical‑foot arrangement and the M8x50 spindle; the design suits direct bolting to fixture plates or dedicated mounting pads. Does the galvanised finish protect against workshop corrosion? Yes, the galvanised surface on the 512 push‑rod clamp provides enhanced resistance to rust and common workshop contaminants. What is the difference between clamping force and holding force for this clamp? Clamping force (2,500 N) is the applied force when engaging the clamp; holding force (2,640 N) indicates the rated residual capacity to resist separation under load. Is the 512 push‑rod clamp suitable for light‑weight fixtures? Yes, with a weight of 0.49 kg the clamp integrates well into lightweight fixtures and modular tooling without adding significant mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Push Rod Clamp, Vertical Base, M8x50 Spindle, 2640N Holding Force, Blackened - Kukamet
Combine compact design, robust holding force and a durable finish for consistent fixture performance; order the Kukamet push-rod clamp B512-3 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet push-rod clamp B512-3 — vertical-base clamp with M8x50 pressure spindle A push-rod clamp B512-3 designed for secure, repeatable workpiece clamping in jigs and small production fixtures, featuring a vertical base and an M8x50 pressure spindle Compact design, only 0.49 kg Max holding force 2,640 N M8x50 pressure spindle Vertical-base mounting for stability Consistent clamping power that supports production flow The compact clamping element delivers a clearly defined holding force that reduces slippage in routine operations. With a rated holding force of 2,640 N and a maximum pressure force of 2,500 N, the device is suited to fixture tasks where repeatability and secure retention are required. The specified forces provide a measurable basis for fixture design and risk assessment; they enable planners to match clamping performance to workpiece mass and machining loads. The integrated pressure spindle (M8x50) allows precise adjustment of contact pressure, making the clamp suitable for both light milling tasks and assembly jigs where consistent contact is essential. Space-saving construction for compact jigs and easy integration At 0.49 kg, the unit is deliberately light to minimise added mass on tooling plates and movable fixtures. The vertical-base mounting concentrates the clamping footprint, which simplifies layout in dense assemblies and conveyor-mounted stations. The M8 thread size and spindle length permit straightforward fastening and fine height adjustment without additional shimming. The compact geometry helps integrators keep cycle times low while maintaining fixture rigidity; where space and repeatability matter, the design supports efficient cell layouts and quicker changeovers. Hard-wearing finish and simple upkeep for workshop use A black oxide finish provides corrosion resistance and a low-reflectivity surface that reduces visible wear in daily handling. The component is engineered for robust, low-maintenance service in workshop and light industrial environments. The characteristic lever-style action delivers rapid clamping and release, supporting high-frequency operation with minimal setup time. The Kukamet push-rod clamp B512-3 is suitable for jigs, assembly fixtures and repeatable holding tasks where dependable performance and easy maintenance are priorities. For reliable, compact clamping solutions request the Kukamet push-rod clamp B512-3 from Metav Werkzeuge — contact our specialists in Emmerich for technical advice or a suitability check via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B512-3 GTIN: 8680731508710 ECLASS: 21041716 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 0.49 kg Holding force: 2,640 N Max pressure force: 2,500 N Pressure spindle: M8x50 Design and features Material: black oxide finish Mounting: vertical base Category: clamp Type: push-rod clamp FAQ What clamping forces does the clamp provide? The Kukamet push-rod clamp B512-3 offers a holding force of 2,640 N and a maximum pressure force of 2,500 N, values intended to guide fixture design and ensure secure retention under typical workshop loads. How is the clamp mounted in a fixture? Mounting is via a vertical base, which concentrates the footprint and simplifies integration into jigs and tooling plates; the M8x50 pressure spindle allows secure fastening and fine height adjustment. What is the surface finish and its benefit? The item is supplied with a black oxide finish, offering corrosion resistance and a discreet, hard-wearing surface that reduces visible wear and eases routine maintenance. For which applications is this clamp suitable? The clamp is suited to jigs, assembly fixtures and light production work where repeatable holding and fast actuation are required; its compact form factor supports dense fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pushrod Clamp Horizontal Foot, Black Oxide Finish, M8x50 Spindle - Kukamet
Take advantage of the robust combination of 2,500 N clamping force, a compact 0.49 kg body and a horizontal foot mount for fast, reliable fixture clamping; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. Push‑rod clamp 511 — Kukamet push‑rod clamp with 2,500 N clamping force A compact Push‑rod clamp 511 designed for horizontal mounting in jigs, fixtures and production tooling where repeatable, high‑force clamping is required. Push‑rod clamp 2,500 N clamping force Holding force up to 2,640 N Horizontal foot mounting Blackened finish, lightweight 0.49 kg Engineered for consistent clamping performance The Push‑rod clamp 511 delivers a rated clamping force of 2,500 N and a maximum holding force of 2,640 N, values that translate into secure workholding while machining or assembling. These figures are expressed as objective, comparable data to assist selection for specific applications: the rated clamping force indicates the usable actuator output under normal operation, while the holding force shows the maximum static resistance once engaged. This technical clarity supports efficient planning of fixture layouts and process parameters, reducing rework and downtime. Compact design that simplifies fixture integration A low mass of 0.49 kg and a horizontal foot base allow the clamp to be installed in confined spaces and on slim fixture plates without compromising stability. The unit’s compact profile minimises interference with tool paths and eases retrofitting into existing jigs. The horizontal mounting arrangement is suitable for lateral actuation and supports standard fixture geometries, enabling straightforward mechanical integration and predictable motion paths for automated cells. Robust finish and material choices for long service life Finished in a blackened surface treatment, the clamp offers improved resistance to wear and light corrosion in workshop environments while maintaining tight manufacturing tolerances. The simple mechanical design, with an M8x50 spindle interface for pressing or adjustment, reduces service complexity and facilitates quick replacements of consumable items. The combination of a rugged finish and a compact construction yields an economical component that consistently supports repetitive clamping cycles in small to medium production runs. Where this clamp adds value in production Ideal for fixture builders, maintenance workshops and small‑batch production, the clamp is suited to applications that require reliable push‑rod actuation, such as assembly fixtures, inspection jigs and light machining setups. The clear specification of force, mass and mounting orientation assists engineers and technicians in calculating clamping loads and ensuring safe, repeatable operation. The clamp’s straightforward mechanical function supports simple maintenance routines and predictable in‑service behaviour, contributing to smoother production flow. For secure fixture clamping from a trusted partner, request the Kukamet Push‑rod clamp 511 through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical Data SKU: B511-3 GTIN: 8680731503876 Article number: 511 Manufacturer: Kukamet eClass: 21041716 ETIM: EC011973 Facts Clamping force (max): 2,500 N Holding force (max): 2,640 N Weight: 0.49 kg Spindle thread: M8x50 Special features Mounting: horizontal foot Surface: blackened finish Design: push‑rod / lever‑type actuation Material finish: blackened (brünierter) FAQ What clamping force can be expected from this clamp? The Push‑rod clamp 511 provides a clamping force of 2,500 N and a holding force up to 2,640 N as stated in the technical specification. Is the clamp suitable for tight fixture spaces? Yes. The clamp’s compact mass of 0.49 kg and horizontal foot mounting make it suitable for integration into confined fixture plates and tight assemblies. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot interface; the clamp is designed to be fastened to fixture plates in a lateral orientation to suit common jig geometries. What surface protection does the clamp have? The unit is supplied with a blackened finish, providing enhanced wear resistance and basic corrosion protection for workshop environments. Can this clamp be used in automated production cells? The Push‑rod clamp 511 is designed for repetitive actuation and is appropriate for automated fixtures where mechanical push‑rod clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Pushrod Clamp M8x50 Horizontal Foot, Zinc Plated Cast Body 14mm Piston, 4000N Holding Force - Kukamet
The combination of a zinc‑plated cast body, a compact horizontal mounting foot and robust force ratings (2,500 N pressing, 4,000 N holding) ensures dependable clamping with low setup effort; order the push‑rod clamp directly via Metav Werkzeuge or request advice from our consultants if further specification is required. Push‑rod clamp 531 (Kukamet) — horizontal foot, 2.5 kN pressing force The Push‑rod clamp 531 is a compact horizontal‑foot clamp for workshop and industrial fixturing, designed to provide repeatable pressing and holding performance in assembly, welding and general clamping tasks. Horizontal mounting foot for stable fixing Holds up to 4,000 N for secure clamping Pressing force 2,500 N for reliable actuation Zinc‑plated cast body for corrosion resistance Stable fixture that saves space and simplifies integration The compact design with a horizontal mounting foot and a total mass of only 0.645 kg delivers a high strength‑to‑size ratio that eases integration into existing jigs and fixtures. The zinc‑plated cast body combines rigidity with corrosion protection, reducing the need for frequent replacements and ensuring constant clamping geometry. This results in predictable repeatability and fewer set‑up interruptions during batch runs. Reliable actuation and holding for consistent processing With a maximum pressing force of 2,500 N (2.5 kN) and a maximum holding force of 4,000 N (4.0 kN), the clamp provides a clear force window for secure part retention. The 14 mm piston diameter enables efficient force transmission while limiting lateral play, which contributes to consistent contact pressure across cycles. Those force figures translate into dependable performance for operations that require firm, repeatable clamping without over‑engineering the fixture. Durable, low‑maintenance components for workshop use Equipped with a M8x50 pressure spindle, the unit uses a common, serviceable threaded component that is easy to replace should wear occur. The corrosion‑protected cast housing minimises surface degradation in workshop environments and reduces maintenance intervals. At the same time, the clamp’s modest weight and footprint make handling and retrofitting tasks straightforward, supporting quicker changeovers and improved process uptime. For procurement or technical clarification regarding the Kukamet push‑rod clamp 531, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to check stock and compatibility with specific fixtures Technical Data Article number: 531-3-Q14 GTIN: 8680731502817 eClass: 21041716 ETIM: EC011973 Facts Pressing force (max): 2,500 N Holding force (max): 4,000 N Piston diameter: 14 mm Weight: 0.645 kg Special features Material: zinc‑plated with cast body Mounting: horizontal foot Pressure spindle: M8x50 Category: Spanner FAQ What maximum pressing force does the clamp provide? The push‑rod clamp 531 delivers a maximum pressing force of 2,500 N (2.5 kN), suitable for secure actuation in typical workshop and light industrial fixtures. Can the clamp hold parts reliably during machining operations? Yes, the unit’s maximum holding force of 4,000 N (4.0 kN) and rigid cast body provide stable retention for many assembly and light machining tasks, contributing to repeatable results. What mounting method is required for this clamp? The clamp is designed for a horizontal mounting foot, providing stable fixation on flat fixture plates or tooling boards. Which spindle specification is used and is it replaceable? The clamp uses an M8x50 pressure spindle, a standard threaded component that can be replaced or adjusted as part of routine maintenance. Who manufactures this clamp and where can more product details be obtained? Kukamet produces the model; for availability, technical drawings or integration advice contact Metav Werkzeuge as listed below. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N Three-Point Vertical Clamp 2000N Thrust, Blackened Finish - Kukamet
Take advantage of the combination of 2,000 N clamping force, 2,500 N holding force and a compact 0.415 kg design for dependable, space-saving fixturing; order the Vertikalspanner 212 directly via Metav Werkzeuge or ask our consultants if needed Kukamet Vertikalspanner 212 — Vertical clamp with 2,000 N clamping force The Vertikalspanner 212 is a vertical lever clamp designed for secure workpiece holding in fixtures and jigs across light industrial and workshop settings Vertical foot mounting for stable installation Clamping force up to 2,000 N Holding force up to 2,500 N Compact blackened design, 0.415 kg Consistent clamping where production demands repeatability The vertical holding device delivers a reliable clamping force that supports repeatable processes on the shop floor. With a maximum clamping force of 2,000 N and a peak holding force of 2,500 N, the component secures parts during machining, assembly or inspection operations, reducing rework and downtime. The mechanism is a classic lever clamp design, engineered to convert operator action into a stable, repeatable hold. For engineers specifying fixtures, the pronounced force ratings make it straightforward to calculate safety margins and cycle stability without over‑engineering the mounting system. Compact mounting and straightforward mechanical integration A small footprint and the vertical foot fastening make the unit suitable for tight fixture layouts where height is the critical axis. The integrated M8x50 pressure spindle allows fine adjustment of contact pressure and compensates for slight part height variations, while the overall mass of 0.415 kg keeps the clamping assembly lightweight. The blackened finish offers surface protection and a low-reflective appearance that blends into machine beds and jigs. These attributes mean the clamp can be fitted into existing setups with minimal modification, shortening retrofitting time and lowering integration costs. Durable operation for everyday workshop use Constructed with a protective surface and a straightforward mechanical design, the clamp is intended for regular cycle use in workshops and small-batch production. The robust holding characteristics paired with a compact, corrosion-resistant finish result in a tool that supports both manual and semi-automated processes. The simple geometry and standardised spindle thread allow for easy replacement of wear parts and predictable behaviour over long series runs. For procurement, the combination of mechanical reliability and simple maintenance represents an efficient balance between performance and cost of ownership For ordering or technical advice on the Kukamet Vertikalspanner 212, contact Metav Werkzeuge for fast, expert support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B212-3 GTIN: 8680731507881 Model: 212 Manufacturer: Kukamet Core specifications Clamping force max: 2,000 N Holding force max: 2,500 N Weight: 0.415 kg Pressure spindle: M8x50 Features and applications Mounting type: vertical foot Finish: blackened Category: Clamping device Intended use: vertical clamping in fixtures and jigs FAQ What maximum clamping and holding forces can be expected from this clamp? The Kukamet Vertikalspanner 212 offers a maximum clamping force of 2,000 N and a holding force of 2,500 N, suitable for light industrial fixturing. How is the clamp mounted to a fixture? Mounting is by a vertical foot arrangement; the clamp is designed to be fastened upright for secure, space-efficient installation. Which spindle size is fitted for contact adjustment? The unit is supplied with a pressure spindle sized M8x50 for fine contact adjustment. Is the surface treated for workshop environments? Yes, the clamp has a blackened finish that provides surface protection and a subdued appearance appropriate for machine beds and fixtures. What is the weight of the clamping device? The device weighs 0.415 kg, offering a compact and lightweight option for fixture integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500N U‑Foot Toggle Clamp With Hook, Stainless Steel, 2000N Thrust 41mm Thread Length - Kukamet
Benefit from corrosion-resistant construction, a reliable U‑foot mounting and high holding capability for secure fastening in demanding environments. Combine the stainless steel build with a positive-engagement hook and precise thread length for consistent clamping performance; order the latch directly via Metav Werkzeuge or consult our specialists for technical advice. Toggle Latch Clamp 413 — Kukamet, stainless steel with U‑foot mounting Toggle Latch Clamp 413 is a robust closure clamp designed for secure fastening in fixtures, transport boxes and industrial assemblies. Stainless steel construction U‑foot mounting for secure attachment Holding force up to 2,500 N Integrated hook for positive engagement Secure fastening for fixtures and transport The Toggle Latch Clamp 413 delivers dependable clamping where repeatable closure and high retention are required. The combination of a corrosion-resistant stainless steel body and an integrated hook creates a positive-engagement system that resists loosening under vibration. Installed with a U‑foot mounting, the clamp spreads load across a stable base, reducing point stresses on assemblies. For production lines or mobile containers, this latch provides a balance of strength and longevity that supports uninterrupted operation. Built to withstand industrial conditions The latch's material choice and mechanical layout prioritise long-term reliability. The use of stainless steel offers inherent corrosion resistance, reducing maintenance intervals and preserving appearance even in humid or outdoor settings. The mechanism is engineered to convert manual lever action into a high retention force while keeping wear low; the result is a clamping element that keeps fixtures closed securely without frequent adjustment. Where cleanliness and material compatibility matter, the metal finish also minimises contamination risk compared with plated alternatives. Measurable performance for specification sheets Key operational values simplify selection for engineers: a holding force of 2,500 N and a maximum pressing force of 2,000 N indicate the clamp’s capacity to resist shear and tensile loads under service. The thread length of 41 mm provides sufficient engagement for secure bolting into panels or brackets. The compact mass—0.285 kg—helps to keep overall assembly weight low while maintaining mechanical integrity. These quantifiable attributes make the latch straightforward to compare against other closure options and easy to include in procurement specifications. For corrosion-resistant clamping solutions from Kukamet, contact Metav Werkzeuge for availability, precise dimensions and supply logistics — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement through Metav Werkzeuge. Technical data Article number: S413-3 GTIN: 8680731509618 Manufacturer: Kukamet Material: Stainless steel Mounting: U-foot With hook: Yes Core data Weight: 0.285 kg Holding force: 2,500 N Pressing force: 2,000 N Thread length: 41 mm eCl@ss: 21041718 ETIM: EC011973 Special features Corrosion-resistant stainless steel construction U‑foot mounting for stable attachment Integrated hook for positive engagement SKU: S413-3 GTIN: 8680731509618 FAQ What materials is this latch suitable for? The Kukamet toggle latch is made from stainless steel and is suitable for use on metal panels and wooden or composite assemblies where a robust closure is required. How much holding force does the clamp provide? The clamp achieves a holding force of up to 2,500 N; the specification for the Toggle Latch Clamp 413 (SKU S413-3) clarifies its capacity for retention under load. What mounting method does the latch use? Mounting is via a U‑foot, which provides a stable base for bolting the latch to a panel or frame and spreads the load across the attachment area. Is the latch suitable for outdoor or humid environments? The stainless steel construction gives the 413 latch good corrosion resistance, making it appropriate for humid or outdoor applications where exposure is expected. What are the key dimensions relevant to installation? Relevant installation values include a thread length of 41 mm and a compact weight of 0.285 kg; these allow straightforward integration into most fixture designs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Horizontal Clamp With Hook, 2 000N Thrust, 2 500N Holding Force, Stainless Steel - Kukamet
Take advantage of the combination of stainless steel durability, high holding capability and compact, horizontal mounting for dependable fixture retention. Secure production processes with a robust latch that combines 2,000 N closing force and 2,500 N holding force—order the clamp directly via Metav Werkzeuge or consult the technical team for specification support. Toggle Latch Clamp 421 by Kukamet — stainless steel quick‑release latch with hook A Toggle Latch Clamp 421 designed for secure, repeatable fastening in jigs, fixtures and transport closures, featuring a horizontal base and integrated hook for rapid engagement. Stainless steel construction for corrosion resistance Holding force 2,500 N for secure retention Closing force 2,000 N for positive engagement Horizontal base with hook for easy integration Durable stainless construction for long service life The stainless steel body provides corrosion resistance and a hygienic surface that endures workshop environments and frequent handling. At approximately 0.32 kg, the latch combines a compact footprint with mechanical robustness, simplifying integration into confined fixtures without adding significant mass. The corrosion‑resistant finish reduces maintenance cycles and delivers predictable performance in repetitive production tasks. High clamping and holding forces that improve process reliability Engineered for demanding applications, the latch delivers a closing force of 2,000 N to engage assemblies quickly and a holding force of 2,500 N to maintain secure closure under load. The separate specification of closing and holding values clarifies operational limits and supports safe fixture design. An adjustable thread length of 41 mm allows fine tuning of the engagement travel, ensuring consistent clamp position and repeatable results across batches. Horizontal mounting and hook design for versatile use The horizontal base (waagerechter Fuß) and integrated hook enable straightforward attachment to panels, frames and transport lids; the lever action provides fast open/close cycles that save cycle time on assembly lines. The compact lever mechanism is suitable for fixtures, transport boxes and temporary closures where rapid, tool‑free operation is required. The latch is supplied with the model identifier S421-3 for easy reference in drawings and parts lists. Choose the Kukamet Toggle Latch Clamp 421 for secure, corrosion‑resistant fastening and contact Metav Werkzeuge in Emmerich for specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S421-3 GTIN: 8680731509625 Model: 421 Facts Weight: 0.32 kg Closing force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Mounting: horizontal base Special features Material: stainless steel With hook: yes eClass: 21041718 ETIM: EC011973 FAQ What applications suit this toggle latch? The Kukamet Toggle Latch Clamp 421 is suitable for jigs, fixtures, transport closures and assembly fixtures where quick, repeatable fastening is required. How do closing and holding forces differ for this clamp? The clamp specifies a closing force of 2,000 N for the engagement action and a holding force of 2,500 N for sustained retention; these values help in fixture design and safety calculations. Can the clamp be adjusted for different panel thicknesses? Yes, the adjustable thread length of 41 mm permits fine tuning of engagement depth to accommodate varying panel and lid gaps. Is the latch suitable for harsh or humid environments? Made from stainless steel, the latch offers corrosion resistance appropriate for many workshop and light industrial environments, providing longer service life and reduced maintenance. Which reference identifies this product in documentation? Use SKU S421-3 or GTIN 8680731509625 when specifying the Kukamet toggle latch in parts lists and procurement documents. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Vertical Clamp With Massive 167mm Arm, 2,000N Press Force, Galvanised - Kukamet
Benefit from a compact clamping solution that combines galvanised durability, a massive holding arm and dependable clamping and holding forces for consistent production results. Order the vertical toggle clamp directly via Metav Werkzeuge or consult our specialists if technical advice is required. Kukamet Vertical toggle clamp 212 — galvanised, massive holding arm, 2,000 N clamping force The Kukamet 212 is a vertical toggle clamp engineered for secure vertical workpiece clamping in machining and assembly environments Galvanised steel construction Massive holding arm for stability 2,000 N clamping force, 2,500 N holding force Vertical foot mounting for secure installation Robust clamping where vertical mounting is essential The 212 delivers reliable clamping force in a compact package. With a rated clamping force of 2,000 N and a maximum holding force of 2,500 N, the mechanism provides the mechanical advantage required for repetitive assembly and machining operations. The galvanised finish offers an additional layer of corrosion resistance compared with raw steel, reducing the need for frequent replacement and helping to maintain consistent performance over time. By combining a toggle mechanism with a massive holding arm, this clamp locks firmly in the closed position, giving repeatable results cycle after cycle. Compact footprint that supports heavy-duty tasks At just 0.447 kg and with an arm length of 167 mm, the unit balances reduced mass with structural robustness. The relatively low weight simplifies fixture design and minimises added load on movable assemblies, while the massive holding arm ensures local stiffness and reduces deflection under load. The small profile and vertical mounting method make the clamp suitable where space is at a premium but consistent clamping pressure is non-negotiable, enabling integration into jigs, fixtures and automated stations without major redesign. Easy mechanical integration for production environments The vertical foot mounting enables straightforward attachment to plates or bases, promoting stable installation and quick retrofitting of existing fixtures. Classification codes such as ECLASS 21041717 and ETIM EC011973 support technical procurement and ensure compatibility with standardised parts lists. The simple mechanical design limits maintenance to basic inspections and lubrication points, which helps to keep downtime low and ensures steady throughput in production workflows. Consistent operation, repeatability and safety The toggle clamp principle converts small handle movement into a high locking force, achieving positive locking and minimising creep under dynamic loads. Built from galvanised steel with a robust clamp arm, the device emphasises repeatability and operator safety: once engaged, the clamp resists accidental release until deliberately opened. For applications that require reliable, frequent clamping cycles—such as fixture-based machining or repetitive assembly—the construction supports long service life with predictable performance. Request a technical quote for the Kukamet 212 from Metav Werkzeuge or speak with our consultants for specification support and integration advice Technical data SKU: 212-3-D-C3 GTIN: 8680731501612 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Core specifications Arm length: 167 mm Clamping force (max): 2,000 N Holding force (max): 2,500 N Weight: 0.447 kg Design and features Material: galvanised steel Mounting: vertical foot Massive holding arm Toggle clamp design Model: 212 FAQ What mounting method does this clamp use? The clamp uses a vertical foot mounting; the Kukamet 212 is designed for secure vertical installation on plates and fixture bases. What are the clamping and holding forces? The device provides a maximum clamping force of 2,000 N and a maximum holding force of 2,500 N for reliable locking during processing. Is the finish suitable for workshop environments? The galvanised steel construction of the Kukamet 212 offers enhanced corrosion resistance compared with untreated steel, making it suitable for general workshop and production use. How large and heavy is the clamp? The clamp has an arm length of 167 mm and a weight of 0.447 kg, combining a compact footprint with structural rigidity. What mechanism ensures repeatable clamping? A mechanical toggle clamp design with a massive holding arm provides positive locking and repeatable clamping cycles for fixture-based operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com