Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
0-90mm Quick-Action Toggle Clamp, Screw Clamp Type, Zinc Plated, 8,000 N Thrust - Kukamet
Take advantage of the combination of a compact horizontal mounting, sturdy 8,000 N clamping force and a corrosion-resistant galvanized finish for reliable fixture work and faster set-up times. Order the Kukamet 831 quick-action lever clamp directly via Metav Werkzeuge or consult our specialists for integration advice. 831 Quick-Action Lever Clamp by Kukamet — 0–90 mm opening, 8,000 N clamping force The 831 is a robust quick-action lever clamp designed for horizontal mounting in assembly jigs, fixtures and workshop benches. Horizontal base for stable mounting Galvanized finish for corrosion resistance 0–90 mm adjustable opening 8,000 N clamping force for dependable hold Faster fixture set-up where repeatability matters The lever-action mechanism provides a quick-action workflow that reduces clamping time and increases throughput in repetitive tasks. The adjustable 0–90 mm opening allows flexible positioning of workpieces without extra adapters, while the specified 8,000 N rating indicates the maximum holding force available under normal operation. For practical terms: clamping force given in newtons describes the mechanical push the clamp can apply, ensuring a secure hold for many assembly and machining aid scenarios. This results in fewer re-clamps and improved consistency in small- to medium-batch production. Built for corrosive workshop environments and long service life Constructed with a galvanized finish, the clamp resists moisture and workshop contaminants, which reduces maintenance intervals and extends service life. At 1.61 kg, the unit is lightweight enough for easy handling during fixture assembly yet substantial enough to remain vibration-stable under load. The protective coating lowers the risk of surface corrosion on contact points and helps maintain reliable repeatability across shifts, so downtime for replacement or repair is minimised. Simple integration with horizontal fixtures and safe operation The horizontal foot design allows direct installation on fixture plates, machine tables or workbenches, providing a low-profile clamping solution where vertical clearance is limited. The combination of a screw-clamp style interface and lever action enables controlled closing and secure locking with visible mechanical engagement. This design supports precise positioning and reduces the likelihood of slippage, offering an operational advantage in quality-critical applications and improving operator confidence during clamping cycles. Contact Metav Werkzeuge for tailored fixture recommendations and to secure the Kukamet 831 for your production line from our Emmerich stock Technical Data SKU: 831-2 GTIN: 8680731505351 Brand: Kukamet eClass: 21020701 ETIM: EC011973 Facts Max clamping force: 8,000 N Opening range: 0–90 mm Weight: 1.61 kg Special features Material: galvanized Mounting: horizontal base Clamp type: screw-clamp style, lever-action Category: spanner FAQ What maximum clamping force does this clamp provide? The Kukamet 831 quick-action lever clamp delivers a maximum clamping force of 8,000 N, suitable for secure holding in many workshop and fixture applications. What is the adjustable opening range of the clamp? The 831 offers an adjustable opening of 0–90 mm, allowing flexible accommodation of varied workpiece thicknesses without additional adapters. How is the clamp mounted in a fixture? The clamp features a horizontal base for direct mounting to fixture plates or benches, providing a low-profile attachment for constrained workspaces. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the galvanised finish on the Kukamet lever clamp provides enhanced corrosion resistance, reducing maintenance and extending service life in demanding environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Push Rod Clamp, Vertical Foot, Zinc Plated, 35 mm Spindle M5x35, 970 N Holding Force - Kukamet
Take advantage of the combination of robust holding force, compact construction and corrosion‑resistant finish to keep fixtures accurate and production moving. Order the clamp directly via Metav Werkzeuge or ask the consultants for tailored delivery from the Emmerich warehouse. Schubstangenspanner 512 — Kukamet push‑rod clamp with vertical base and zinc‑plated finish The Schubstangenspanner 512 is a compact push‑rod clamp suited to fixtures and jigs where secure, repeatable holding is required Zinc-plated for corrosion resistance Vertical base for bench mounting Max holding force 970 N Lightweight 0.135 kg for compact fixtures Consistent clamping and dependable force for production The clamp provides a reliable holding force of 970 N and a maximum clamping force of 800 N, values that ensure repeatable results in batch production and manual assembly tasks. The integrated M5x35 pressure spindle allows fine adjustment of contact pressure, reducing set‑up time and the need for constant re‑adjustment. Because the unit is zinc‑plated, surface protection against corrosion is improved, which prolongs service life in mixed workshop environments and maintains clamping performance over time. Space‑saving mounting that simplifies fixture design A vertical base configuration enables direct bench or fixture mounting without complex adaptors, saving assembly height and simplifying layout. The compact form factor and a mass of 0.135 kg make the clamp easy to integrate into existing jigs where weight and footprint matter. For manufacturing cells that require frequent reconfiguration, the combination of small size and robust fixation contributes to faster changeovers and more efficient use of workbench space. Low‑maintenance construction for continuous operation The zinc‑plated finish reduces the need for intensive upkeep and keeps the contact surfaces protected under typical workshop conditions. The solid construction supports long service intervals and predictable performance, so downtime for repairs or replacements is minimised. Supplied through Metav Werkzeuge, the product benefits from a dependable logistics chain and quality control that supports consistent availability for both small businesses and larger industrial customers. Contact Metav Werkzeuge in Emmerich for a precise supply recommendation and to secure the Kukamet 512 push‑rod clamp for immediate dispatch — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: 512-1 GTIN: 8680731502657 Manufacturer: Kukamet Facts Max clamping force: 800 N Max holding force: 970 N Pressure spindle: M5x35 Weight: 0.135 kg eCl@ss: 21041716 ETIM: EC011973 Special features Push‑rod clamp design Vertical base mounting Zinc‑plated finish Compact, lightweight construction FAQ What materials is this clamp suitable for? The Kukamet 512 push‑rod clamp is designed as a general‑purpose clamping device for fixtures and jigs; its zinc‑plated finish makes it suitable for typical workshop materials and indoor environments. How is the clamp fixed to a workbench or fixture? Mounting is via the vertical base; the vertical base allows direct attachment to benches and fixture plates for a secure installation of the Kukamet 512 (SKU 512-1). Can the clamping pressure be adjusted? Yes, the clamp uses an M5x35 pressure spindle to fine‑tune the contact pressure, enabling accurate setting of the required clamping force for consistent results. Is the clamp corrosion resistant? The zinc‑plated surface provides corrosion protection appropriate for standard workshop use, helping to maintain performance and reduce maintenance needs. What holding and clamping forces can be expected in daily use? Typical performance figures are 970 N holding force and 800 N maximum clamping force, values that support repeatable clamping in assembly and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1,200 N Vertical Clamp With Safety Lock, Zinc Plated, M6x40 Spindle - Kukamet
Reliable, space-saving clamping with a galvanised body and an integrated safety lock ensures secure workholding and long service life; combine the compact vertical-foot mounting and clear performance figures for efficient jig design. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 212 — Kukamet vertical lever clamp with safety lock and galvanised finish The Vertical clamp 212 is a lever-operated vertical clamp designed for secure, repeatable clamping in confined jigs and workshop fixtures. Galvanised corrosion protection Integrated safety lock mechanism Max clamping force 1,200 N Lightweight 0.23 kg construction Secure, repeatable clamping to speed up production This lever-type vertical clamp delivers consistent, measurable holding performance that supports reliable cycle times on the shop floor. The 1,200 N maximum clamping force, combined with a 1,400 N holding capacity, provides a clear technical basis for fixture design and risk assessment; those figures enable predictable deformation limits and more accurate process control. Where repeatability matters, a clamp that specifies force values removes guesswork and reduces set-up time, improving throughput without compromising part quality. Robust materials and safety features for everyday use Constructed from galvanised steel, the device resists corrosion in humid or workshop environments and maintains functional surfaces for longer service life. The integrated safety lock prevents unintended release during machining operations, reducing the likelihood of workpiece movement and associated rework. The compact body (approx. 0.23 kg) suits dense fixture layouts and makes retrofitting straightforward; a lightweight clamp simplifies handling while preserving mechanical resilience for daily use. Practical installation and technical compatibility Mounting is by a vertical foot, permitting direct attachment to plates and jigs where a low profile is required. The supplied pressure spindle is M6×40, a common specification that fits standard clamping interfaces and allows straightforward replacement if necessary. As a lever-operated solution, the clamp integrates easily into manual and semi-automated fixtures, offering fast actuation and confident locking. Technical documentation (PDF) is available to verify dimensional fitment when planning installations. Contact Metav Werkzeuge to discuss how the Kukamet Vertical clamp 212 (SKU 212-2-L) can be integrated into existing fixtures and to request precise mounting guidance from our Emmerich-based technical team Technical data SKU: 212-2-L GTIN: 8680731501575 eClass: 21041717 ETIM: EC011973 Performance data Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6x40 Design & features Mounting: vertical foot Material: galvanised Safety lock integrated Lever-type vertical clamp FAQ What maximum clamping force does the clamp provide? The Kukamet vertical clamp 212 specifies a maximum clamping force of 1,200 N and a holding capacity of 1,400 N, values useful for fixture calculations. Is the safety lock mechanical or automatic? The safety lock on the Vertical clamp 212 is a mechanical locking feature that secures the lever in position to prevent unintended release during machining. What is the mounting arrangement for this clamp? Mounting is via a vertical foot, allowing the clamp to be bolted directly to fixture plates or bases for compact, low-profile installations. Which pressure spindle size is supplied with the clamp? The clamp is supplied with a pressure spindle sized M6×40, compatible with standard clamping interfaces. Is the clamp suitable for corrosive workshop environments? The body is galvanised, providing corrosion resistance appropriate for general workshop conditions and extending service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1.2kN Vertical Clamp With Horizontal Foot, Massive Holding Arm & Safety Lock - Kukamet
Take advantage of the robust combination of a massive holding arm, a safety lock and compact mounting to secure fixtures reliably in small production runs. The clamp delivers high holding performance with a 112 mm lever while remaining lightweight for simple positioning. Order the vertical clamp directly via Metav Werkzeuge or consult their advisors for application support. Vertical clamp 211 by Kukamet — 112 mm arm, safety lock The Vertical clamp 211 is a vertical lever clamp designed for secure workholding in jigging, assembly and light fixture applications across workshops and small-batch production environments. Massive holding arm with safety lock 112 mm operating arm length Horizontal mounting foot for stability 1,400 N maximum holding force Consistent clamping force for reliable fixing The clamp is engineered to provide repeatable holding capacity, making it suitable for fixtures where consistent pressure prevents part movement and rework. With a 1,400 N maximum holding force and a separate closing capacity of 1,200 N, the unit keeps clamped components stable under load, reducing process interruptions. The integrated safety lock prevents accidental release during handling or machining, which contributes directly to process reliability and operator confidence. The construction supports frequent operation in production jigs without complex adjustments, allowing a smoother workflow and fewer checks between cycles. Space-saving mounting and easy integration A horizontal mounting foot and compact geometry make the clamp straightforward to install on benches, fixture plates or brackets. The 112 mm lever arm provides sufficient reach for many standard holding tasks while the low mass—just 0.235 kg—keeps added inertia minimal when fitted to moving assemblies. The external finish is a blackened finish, offering basic surface protection and a professional appearance that integrates well with existing toolroom hardware. These design choices mean the device can be incorporated into new or existing tooling layouts with minimal redesign, saving engineering time and reducing machine downtime. Durable mechanism and practical operation A massive holding arm and robust lever mechanism deliver durable performance under frequent actuation. The clamp’s lever action allows rapid engagement and disengagement, which accelerates repeat operations on assembly lines or test stations. The blackened surface treatment and solid construction support long service intervals with straightforward maintenance; regular cleaning and occasional lubrication of pivot points suffice to retain smooth function. Where secure, quick clamping is required without complex hydraulic or pneumatic systems, this lever-type clamp combines simplicity with industrially relevant performance. Contact Metav Werkzeuge to discuss delivery options and application suitability for the Kukamet vertical clamp 211; request technical details or a tailored supply recommendation by phone or email Technical data Article number: B211-2-D-L-C2 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Arm length: 112 mm Maximum pressing force: 1,200 N Maximum holding force: 1,400 N Weight: 0.235 kg Special features Massive holding arm and safety lock Horizontal mounting foot Finish: blackened FAQ What is the maximum holding force of the clamp? The Kukamet vertical clamp 211 provides a maximum holding force of 1,400 N, suitable for secure positioning in jig and assembly operations. How is the clamp mounted to a fixture? Mounting is via the horizontal mounting foot supplied; the design allows direct attachment to fixture plates or bench surfaces for rigid installation. Which parts of the clamp improve safety during use? The integrated safety lock prevents unintentional opening, while the robust arm construction ensures stable clamping under repeated actuation. Is the clamp suitable for frequent industrial use? Yes. The lever mechanism and solid arm construction are intended for repetitive use in workshop and light production settings with routine maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Toggle Clamp Horizontal Base, Metal Handle, Zinc Plated, 23mm Thread Length - Kukamet
Take advantage of a compact, galvanised toggle clamp that combines a high holding force with a sturdy metal handle for reliable fixturing; order the part directly via Metav Werkzeuge or consult the Metav team for specification support. Verschlussspanner 361 – Horizontal-foot toggle clamp, galvanised (Kukamet) Verschlussspanner 361 is a durable closure clamp designed for repetitive locking and secure fixtures in workshop and light industrial applications. Horizontal-foot for firm mounting Galvanised finish for corrosion resistance Metal handle for durable operation Consistent clamping performance for repeatable processes Built for repeated use, this toggle clamp delivers measurable force values that support predictable results. With a maximum pressing force of 1000 N and a holding force of 1200 N, the device provides the technical basis for secure workholding during assembly or light machining. The horizontal base plate ensures stable mounting on jigs or fixtures, reducing slippage and aligning with common workshop setups. The mechanical action converts handle movement into firm clamping pressure, allowing quick engagement and disengagement while maintaining repeatability. Compact design that speeds up installation and handling The compact dimensions and low mass make the clamp simple to integrate into existing tooling without adding unnecessary bulk. A thread length of 23 mm permits straightforward adjustment and fine positioning of the clamping point, while the overall weight of 0.055 kg keeps the unit unobtrusive on fixtures. The built-in hook option enables flexible anchoring positions, and the horizontal-foot arrangement aligns with standard mounting holes, cutting installation time and enabling fast changeovers on production or test benches. Corrosion resistance and robust grip for long service life Plated with a galvanised finish, the clamp resists surface corrosion in standard workshop environments, extending service intervals and lowering replacement frequency. The metal handle increases wear resistance compared with plastic alternatives and ensures tactile stability when operating the lever. These material choices translate into long-term economy: less downtime for maintenance and fewer unexpected part failures. For tasks where a secure mechanical latch is key, the combination of finish and construction contributes directly to operational reliability. Suitable applications and straightforward selection This closure latch is suitable for general fixturing, assembly work and light clamping tasks on standard materials. The hardware’s clear numeric specifications make it simple to compare with other clamping elements when designing production tooling. The galvanised surface and metal handle make the component appropriate for workshop environments where occasional exposure and frequent handling occur. When selecting clamping elements, prioritise match between the required holding force and the stated 1200 N retention capability to ensure safe and effective fixation. Contact Metav Werkzeuge for a technical consultation or to request the detailed product sheet for the Kukamet toggle clamp 361; assistance is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 361-1 GTIN: 8682843521076 SKU: 361-1 ECLASS: 21041718 ETIM: EC011973 Facts Maximum pressing force: 1000 N Maximum holding force: 1200 N Thread length: 23 mm Weight: 0.055 kg Special features Material: galvanised Mounting: horizontal foot Handle: metal handle With hook: yes FAQ What is the main clamping force of this toggle clamp? The Kukamet Verschlussspanner 361 provides a maximum pressing force of 1000 N and a holding force of 1200 N, suitable for light industrial and workshop fixtures. Is the clamp suitable for outdoor or humid environments? The galvanised finish on the closure clamp increases corrosion resistance, making it appropriate for standard workshop conditions; extreme outdoor exposure may require additional protection. How is the unit mounted to a fixture? Mounting is via a horizontal foot plate designed for secure attachment to jigs and fixture plates; the horizontal-foot arrangement matches common mounting patterns. Does the clamp include an adjustable spindle? Yes, the clamp includes an adjustable threaded spindle with a thread length of 23 mm for fine positioning of the clamping point. Which materials is the clamp intended to hold? The clamp is intended for general fixturing and assembly tasks on common workshop materials; verify that the stated holding force meets the application’s requirements before selection. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1.5 kN Horizontal Toggle Clamp With Hook, Zinc-Plated, 1725 N Holding Force - Kukamet
Take advantage of a compact, corrosion‑resistant fastening that combines a horizontal-foot mounting with a zinc-plated finish and strong clamping force for reliable fixture performance; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Toggle Latch Clamp 363 — Horizontal-foot latch with zinc-plated finish (Kukamet) A Toggle Latch Clamp 363 designed for secure, repeatable fastening in jigs, fixtures and enclosure assemblies where quick locking and corrosion resistance are required Horizontal-foot mounting for stable attachment Zinc-plated finish resists corrosion Clamping force up to 1,500 N, holding 1,725 N Consistent clamping that keeps processes running The latch delivers a defined clamping force of 1,500 N, with a tested holding force of 1,725 N, ensuring reliable retention of components during machining and assembly. The lever mechanism converts operator input into a secure lock with little variation, which reduces repositioning and rejects. Where repeatability matters on production lines or in manual assembly cells, the horizontal-foot configuration provides a low-profile attachment that keeps fixtures stable and vibration-free, improving overall throughput and part quality. Corrosion protection and compact mounting for workshop use Finished in zinc-plated steel, the latch is optimised for environments where occasional humidity or shop contaminants occur. The compact construction and a mass of 0.05 kg make the device easy to integrate into existing jigs without overloading mounting points, and the included hook permits secure engagement with mating plates or loops. For maintenance teams and workshop planners, the result is a durable fastening that requires minimal intervention and preserves alignment over long production runs. Rapid operation with low upkeep for daily workflows The lever action supports fast open/close cycles, enabling quicker clamping and unclamping compared with threaded or bolted solutions; this saves time on repetitive tasks and reduces ergonomic strain. The mechanical design focuses on simple serviceability so replacements or adjustments can be completed without specialised tools. Supplied by a reputable industrial partner, the clamp suits applications from fixture production to lightweight enclosure closures where a dependable, repeatable lock is essential. For specification confirmation or to discuss fixture integration, contact Metav Werkzeuge — local supply with a European quality filter; email info@metav-werkzeuge.com or call +49 2822 7131930 to request technical advice or place an order Technical data SKU: 363-2 GTIN: 8680731504620 Article name: Toggle latch clamp 363 Manufacturer: Kukamet Numbers / Core technical data Max. clamping force: 1,500 N Max. holding force: 1,725 N Weight: 0.05 kg eClass: 21041718 ETIM: EC011973 Special features / Materials Material: zinc-plated steel Mounting: horizontal foot With hook: yes FAQ What mounting method does the clamp use? The Toggle Latch Clamp 363 mounts via a horizontal foot; the flat base is intended for stable attachment to jigs and fixture plates. What clamping performance can be expected? Rated clamping force is 1,500 N with a holding force up to 1,725 N for reliable retention under typical assembly loads. Is the surface protected against corrosion? Yes, the part is zinc-plated, providing corrosion resistance suitable for workshop and light industrial environments. Can the latch be used on compact or lightweight fixtures? Yes, at approximately 0.05 kg the latch is lightweight and designed for easy integration into small jigs and enclosures. Which SKU should be ordered for this latch? Order SKU 363-2 for the Toggle Latch Clamp 363 from Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1650 N Clamping Force Horizontal Base Toggle Clamp With Hook, Zinc Plated - Kukamet
Take advantage of the combination of robust galvanised corrosion protection, a compact horizontal mounting base, and proven clamping and holding forces for reliable fixture performance; order the locking clamp directly via Metav Werkzeuge or consult the Metav team for specification advice. Locking clamp 362 — horizontal-base toggle clamp, galvanised (Kukamet) A Locking clamp 362 designed for secure, repeatable clamping on jigs and fixtures, featuring a horizontal foot for stable mounting and an integrated hook for versatile applications. Galvanised corrosion protection Horizontal mounting base Clamping force 1,400 N Integrated hook, 25 mm thread length Proven clamping performance for production use The Locking clamp 362 delivers consistent results through a defined clamping force of 1,400 N and a higher holding force of 1,650 N, values that translate directly into secure workholding under dynamic load. These numerical ratings indicate the clamp’s capacity to resist displacement during machining or assembly; in practice this means fewer re-checks and improved cycle consistency. The galvanised finish contributes to long-term dimensional reliability by limiting corrosion on critical surfaces, while the compact mass of 0.14 kg keeps moving parts light and responsive. Space-saving design that speeds up set-up A horizontal-foot mounting arrangement enables easy installation on jigs, fixtures and assembly tables, where a low profile is essential. The integrated hook together with a 25 mm thread length provides adjustment range for variable material thicknesses without changing attachments, reducing downtime between jobs. The clamp’s lever action is optimised for rapid engagement and repeatability, supporting efficient batch processing and reducing manual repositioning. These characteristics make the component suitable for small-batch work as well as integration into automated production fixtures. Built for durability and dependable supply Constructed from galvanised steel and presented as a lever-style clamp, the device is intended to withstand everyday workshop stresses with minimal upkeep; periodic inspection and light lubrication of the pivot points are sufficient for prolonged service life. Supplied by Kukamet and distributed via Metav Werkzeuge, the part benefits from established logistics and quality oversight at the Emmerich location, offering reliable availability for workshops and production lines. For applications that demand consistent clamping and uncomplicated installation, this clamp provides a pragmatic balance of robustness and simplicity. Choose the Kukamet locking clamp 362 through Metav Werkzeuge for dependable clamping in jigs and fixtures — contact Metav Werkzeuge for tailored advice or detailed specifications at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 362-1 GTIN: 8680731505160 ECLASS: 21041718 ETIM: EC011973 Material: galvanised Core technical data Weight: 0.14 kg Clamping force: 1,400 N Holding force: 1,650 N Thread length: 25 mm Special features Horizontal foot mounting With hook Lever-style clamp (hebelspanner) Category: Spanner SKU: 362-1 Manufacturer: Kukamet FAQ What clamping force can be expected from this clamp? The clamp provides a clamping force of 1,400 N and a holding force of 1,650 N, suitable for secure workholding in many fixture and assembly applications. Is the clamp suitable for repeated industrial use? Yes, the galvanised finish and lever design make the clamp suitable for repeated cycles; light maintenance of pivot points is recommended to preserve performance. How is the clamp mounted and adjusted? Mounting is via a horizontal foot; adjustment is achieved using the integrated hook and the 25 mm thread for compensating material thickness. Which materials is the clamp compatible with? The clamp serves as a mechanical workholding device and can be used with fixtures that secure a wide range of materials; selection should match the required clamping pressure and fixture design. What are the dimensions and weight? The unit weighs 0.14 kg and features a 25 mm thread length; further dimensional details are available on request via Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1.66kg Vertical Clamp 118.5mm Arm, 4.5kN Closing Force, Massive Hold Arm, Zinc Plated - Kukamet
Take advantage of the combination of a galvanised finish, a solid holding arm and high clamping forces to secure workpieces reliably in production and workshop environments; order directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Vertical clamp 213 — Kukamet vertical lever clamp with galvanised finish and solid holding arm The Vertical clamp 213 is a vertical lever clamp designed for firm, repeatable workholding on jigs, fixtures and assembly benches in industrial and workshop settings Galvanised steel construction Solid holding arm for stable clamping Angle base for secure mounting Up to 5,000 N holding force Robust construction for dependable daily use Built for repetitive operation, this vertical clamp combines a galvanised surface treatment with a solid holding arm to resist corrosion and bending under load. The robust arm reduces deflection during clamping cycles, so the clamping position remains consistent. This stability is particularly beneficial for assembly and welding jigs where repeatability minimises rework. The unit's compact mass (approx. 1.66 kg) keeps fixture inertia low while maintaining mechanical strength for frequent operation. Precise clamping performance that supports process reliability Designed to deliver measurable clamping capacity, the device provides a max holding force of 5,000 N and a max pressing force of 4,500 N, which are suitable for a wide range of medium-duty clamping tasks. The arm length of 118.5 mm provides an extended lever for effective force transmission without requiring excessive handle travel. Where consistent clamp pressure is required, the mechanical design ensures forces are applied predictably, contributing to reduced variability in downstream machining, inspection or assembly steps. Simple mounting and long-term durability for production workflows Mounted via an angle base, the clamp can be fixed securely to plates or fixture rails, enabling quick integration into existing setups. The galvanised finish prolongs service life in workshop environments, and the straightforward mechanical construction allows for fast replacement or repositioning when layouts change. Weight and form factor make the clamp suitable for portable fixtures as well as fixed production jigs, offering a practical balance between robustness and adaptability. For secure, repeatable clamping from Kukamet choose the Vertical clamp 213 — contact Metav Werkzeuge for order placement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 213-5-D-C1 GTIN: 8680731502114 Model: 213 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Core technical data Weight: 1.66 kg Arm length: 118.5 mm Max holding force: 5,000 N Max pressing force: 4,500 N Special features Material: galvanised steel Mounting: angle base Solid holding arm Type: vertical lever/toggle clamp Category: Clamping technology — clamp FAQ What maximum holding force does the clamp provide? The clamp delivers a maximum holding force of 5,000 N, specified for the Vertical clamp 213 to ensure secure fixation of workpieces. Which materials is the clamp suitable for in workshop use? The galvanised steel construction is suitable for general workshop environments and fixtures; selection of contact pads or workpiece support should be matched to the work material to prevent marking. How is the clamp mounted to a fixture? Mounting is carried out via the angle base; the clamp can be bolted to plates or fixture rails for stable installation. What is the arm length and why does it matter? The arm length is 118.5 mm, which provides effective lever action for force transmission while keeping handle travel moderate for rapid operation. Is the clamp suitable for repetitive production cycles? Yes, the robust design and solid holding arm are intended for repetitive clamping in production and workshop workflows. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Pushrod Clamp Horizontal Foot Metal Handle, 700N Holding Force, Zinc Plated - Kukamet
Reliable clamping with a galvanised body and metal handle ensures durable, repeatable performance; the compact design and horizontal foot enable fast integration into assembly jigs. Take advantage of the combination of sturdy construction, clear force ratings and simple mounting for dependable small-part workholding. Order the push-rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 511 — lever clamp with galvanised finish and horizontal foot (Kukamet) The Push-rod clamp 511 is a compact lever clamp designed for secure temporary fixturing in workshop and light industrial assembly applications. Galvanised steel construction for corrosion resistance Metal handle for durable operation Horizontal foot mounting for fixed installation Holding force up to 700 N Durable construction that keeps fixtures reliable The galvanised steel body delivers long-term corrosion protection while the metal handle resists wear under frequent operation, reducing lifecycle costs and downtime. With a rated pressing capacity of 550 N and a measured holding capability beyond that, the design provides a reliable margin for repetitive clamping tasks. This combination of corrosion resistance and mechanical resilience means less maintenance and fewer replacement purchases for routine shop use. Consistent holding and straightforward mounting for repeatable results Engineered for predictable performance, the clamp offers a clear holding force rating of 700 N, making load planning and fixture design straightforward. The horizontal foot mounting allows a low-profile installation on jigs, plates or assembly benches, enabling quick alignment and secure fixation of components. Where process repeatability matters, this clamp contributes to consistent cycle times and reduced rework. Compact format to save space and speed up setups Weighing only 0.087 kg and equipped with an M4x25 pressure spindle, the unit fits into compact fixtures without adding bulk, simplifying layout in constrained work areas. The small footprint and lever action permit rapid engagement and release, improving operator efficiency during batch assembly or test cycles. As a practical workholding element, it supports a smoother workflow and easier integration into existing fixtures. For reliable lever clamping from Kukamet, order the Push-rod clamp 511 via Metav Werkzeuge in Emmerich — for technical guidance or procurement assistance contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 511-0-M SKU: 511-0-M GTIN: 8680731504941 ECLASS: 21041716 ETIM: EC011973 Facts Weight: 0.087 kg Pressing force: 550 N Holding force: 700 N Spindle thread: M4x25 Special features Material: galvanised (zinc-plated) steel Foot type: horizontal foot Handle: metal Category: clamp (lever/rod clamp) FAQ What is the maximum holding force of this clamp? The clamp offers a holding force of up to 700 N; the Push-rod clamp 511 from Kukamet is specified for reliable short-term fixturing at that rating. Which mounting orientation is required for installation? A horizontal foot is provided for fixed mounting; the horizontal foot design supports low-profile installation on plates and jigs. Is the clamp corrosion-resistant for workshop use? Yes, the body is galvanised (zinc-plated), giving the clamp improved resistance to rust in normal workshop environments. What spindle specification does the clamp use? The pressure spindle is M4x25, suitable for fine adjustment within the clamp’s operating range. Can this clamp be used for repetitive production cycles? The robust metal handle and galvanised construction make the clamp well suited to frequent operation and short-cycle production tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000N Horizontal Foot Clamp With Hook, Zinc Plated, 45mm Thread Length, 1500N Holding Force - Kukamet
Take advantage of the combination of durable, zinc-plated construction and reliable clamping performance to improve fixture security and cycle consistency on the shop floor. Order the clamp directly via Metav Werkzeuge or consult the Metav team for integration advice. Toggle clamp 351 — horizontal-foot toggle clamp with zinc-plated finish (Kukamet) The Toggle clamp 351 is a horizontal-foot toggle clamp designed for secure workpiece retention in production jigs and workshop fixtures, offering a balanced combination of compact size and industrial clamping force. Horizontal-foot mounting for stable fixation Zinc-plated surface for corrosion protection Clamping force up to 1,000 N Holding force up to 1,500 N with hook Secure clamping that supports production reliability The clamp delivers consistent clamping force thanks to a lever mechanism engineered for repeatable action. With a rated clamping force of 1,000 N and a holding force of 1,500 N, the device separates the active securing action from the static retention capacity, which helps prevent slippage under dynamic loads. The mechanical arrangement reduces variability across cycles, making the clamp suitable for assembly jigs and repetitive machining tasks where reproducible positioning is required. The robust kinematics mean fewer interruptions for readjustment and therefore a smoother production flow. Corrosion resistance and workshop suitability Constructed from zinc-plated steel, the clamp resists surface oxidation that commonly affects plain-steel fixtures in humid or workshop environments. The protective finish extends service life and reduces maintenance frequency, which benefits workshops aiming to keep tool downtime low. Despite its protective coating, the component remains compact and lightweight (approx. 0.135 kg), allowing easy integration into existing fixtures without significantly increasing moving mass. The inclusion of a hook enhances retention options for threaded adjustments and adaptable fixturing setups. Integration, adjustment and practical dimensions Designed for horizontal-foot mounting, the clamp installs on flat bases for straightforward alignment with fixture plates. The thread length of 45 mm facilitates secure engagement with adjustable spindle assemblies and standard fixtures. Its compact footprint supports dense fixture layouts in space-constrained jigs while providing the leverage needed for reliable closure. Where precision repeatability matters, the clamp’s simple mechanics enable quick visual inspection of engagement state, supporting fast-cycle operations and reducing secondary checks. Choose Kukamet's zinc-plated toggle clamp for reliable, compact fixturing — contact Metav Werkzeuge in Emmerich for procurement and integration assistance: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 351-1 GTIN: 8680731502442 SKU: 351-1 Name: Toggle clamp 351 Facts Weight: 0.135 kg Clamping force: 1,000 N Holding force: 1,500 N Thread length: 45 mm eCl@ss: 21041718 ETIM: EC011973 Special features Material: zinc-plated Mounting: horizontal foot Includes hook No special extras noted FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 1,000 N, with a holding capacity rated at 1,500 N for secure retention. Is the surface treatment suitable for workshop environments? Yes, the clamp features a zinc-plated finish that offers corrosion resistance suitable for general workshop and industrial settings. How is the clamp mounted? The device is designed for horizontal-foot mounting, enabling stable attachment to flat fixture plates and jig bases. Does the clamp include adjustable features for different workpiece heights? The product includes a hook and a thread length of 45 mm, allowing for spindle adjustments and adaptable engagement with various workpiece profiles. Which SKU should be referenced when ordering or specifying this clamp? Refer to SKU 351-1 or GTIN 8680731502442 for accurate specification and ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000N Toggle Clamp Horizontal Base Zinc-Plated With Hook, Holding Force 1500N - Kukamet
Reliable quick-action latch clamp with 1,000 N clamping force and 1,500 N holding capacity, finished in galvanised steel and supplied with a hook and horizontal-foot mount for secure fixture fixing. Order the Kukamet latch clamp 321 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet latch clamp 321 — horizontal-foot toggle latch with hook, galvanised finish The Kukamet latch clamp 321 is a compact horizontal-foot toggle latch clamp designed to secure panels, jigs and light assembly fixtures where repeatable fastening and quick release are required. Galvanised corrosion protection Horizontal-foot mounting Max clamping force 1,000 N Hook latch with 1,500 N holding force Faster setup, dependable clamping for small-series and jigs A quick-action latch that delivers repeatable results reduces setup time on frequent changeovers. The mechanism provides a 1,000 N clamping action combined with a 1,500 N holding capacity, which translates into secure retention for small workpieces and fixture plates. The toggle design converts lever movement into consistent pressure, helping maintain process reliability and minimize rework. This compact fastening solution supports efficient production flow in light assembly and maintenance tasks. Durable finish and low-maintenance operation for workshop use The body is galvanised, giving robust resistance against rust in everyday workshop conditions and prolonging service life with minimal care. At 0.115 kg, the component is lightweight yet sturdy, reducing additional load on fixtures and enabling straightforward retrofitting. The corrosion-resistant surface and simple mechanical design mean only occasional inspection is necessary, lowering lifecycle upkeep while ensuring consistent performance in standard industrial environments. Practical integration and adjustable engagement for versatile fixtures Mounting on a horizontal foot ensures stable attachment to benches and plates, while the 45 mm thread length allows fine adjustment of engagement and tension during installation. The integrated hook latch provides positive capture and quick release for panels and covers. Compatibility with common fixture layouts and the compact footprint of the clamp make it suitable for both production fixtures and service jigs, offering a balance of secure holding and fast accessibility. For secure, low-maintenance fixture fastening choose the Kukamet latch clamp 321 — contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 321-1 GTIN: 8680731505634 Brand: Kukamet Facts Max clamping force: 1,000 N Max holding force: 1,500 N Weight: 0.115 kg Thread length: 45 mm Special features Material: galvanised Mounting: horizontal foot Hook latch included ETIM: EC011973 ECLASS: 21041718 FAQ What clamping and holding forces does this latch provide? The Kukamet latch clamp 321 offers a clamping force of 1,000 N and a holding capacity of 1,500 N, suitable for securing light fixtures and panels. Is the finish suitable for humid workshop environments? Yes, the galvanised finish on the Kukamet latch clamp 321 provides corrosion resistance for typical workshop and light industrial use. How is the clamp mounted and adjusted? The clamp mounts via a horizontal foot and includes a 45 mm threaded engagement for tension adjustment during installation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000N Vertical Foot Toggle Clamp With Hook, Zinc Plated, 45mm Thread Length - Kukamet
Take advantage of a compact, corrosion-resistant toggle clamp that combines dependable holding and pressing force with easy fixture integration; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Kukamet 332 vertical toggle clamp — galvanised vertical-base latch clamp with hook and 1,500 N holding force A Kukamet 332 vertical toggle clamp designed for reliable latching and repeatable clamping in jigs, fixtures and assembly stations. Galvanised steel corrosion protection Vertical base for panel mounting Holding force up to 1,500 N Compact 95 g lightweight design Consistent clamping performance for production use The vertical toggle clamp delivers precise, repeatable retention by combining a pressing force of 1,000 N with a holding force up to 1,500 N, providing the mechanical security required in short-cycle assembly and fixturing applications. The galvanised finish ensures resistance to corrosion in workshop environments, while the integrated hook secures latching under vibration. As a mechanical latch, the device avoids electronic actuation, offering predictable behaviour and minimal maintenance compared with powered systems. This makes the clamp suitable where dependable mechanical locking and simple manual operation are priorities. Small footprint and straightforward machine integration With a compact 95 g mass and a thread length of 45 mm, the clamp fits tight fixture layouts and allows fine adjustment of the contact point via the threaded spindle. The vertical base configuration provides a stable mounting surface for panels or frames and simplifies alignment in stacked or gantry-mounted assemblies. The narrow profile reduces interference with tooling and improves access for operators, enabling fixtures to be designed with higher part density and shorter cycle times. The galvanised surface maintains functionality in mixed-material production areas without requiring special coatings. Robust construction for safe, long-term use Manufactured from galvanised steel and equipped with a locking hook, the clamp offers consistent performance and secure latching throughout repeated cycles. The simple mechanical design minimises wear points and supports straightforward inspection and replacement of consumable parts if required. For buyers seeking reliable components from a traceable European supply chain, the Kukamet clamp is offered via Metav Werkzeuge, whose quality-filtering and logistics in Emmerich aim to ensure rapid availability and predictable delivery. Technical documentation and the mounting footprint are provided to support safe integration into fixtures and to aid in conformity checks. Contact Metav Werkzeuge today to discuss the Kukamet 332 vertical toggle clamp and its suitability for specific fixturing needs; technical advice and prompt supply are available from Metav Werkzeuge in Emmerich. Technical data SKU: 332-1 GTIN: 8682843520970 EClass: 21041718 ETIM: EC011973 Facts Weight: 0.095 kg Pressing force: 1,000 N Holding force: 1,500 N Thread length: 45 mm Special features Galvanised finish Vertical base (senkrechter Fuß) With hook Category: Spanner Manufacturer: Kukamet FAQ What materials is this clamp suitable for? The Kukamet vertical toggle clamp 332 is constructed from galvanised steel and is intended for general-purpose use in fixtures where metal and mixed-material handling occur. How is the clamp mounted? Mounting uses the vertical base for panel or plate attachment; the threaded spindle (45 mm) allows fine adjustment of the contact point on the workpiece. What forces can be expected from the clamp? The toggle clamp provides a pressing force of approximately 1,000 N and a holding force up to 1,500 N for secure latching in manual and automated fixtures. Is the clamp corrosion-resistant? Yes, the galvanised finish provides corrosion protection suitable for standard workshop conditions and reduces the need for additional surface treatment. Which SKU should be ordered for this model? Order the Kukamet 332 under SKU 332-1; referencing the SKU helps ensure the correct vertical-base latch clamp is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000 N Combination Clamp Horizontal Base Zinc-Plated, 0.405 kg - Kukamet
Benefit from the compact design, galvanised corrosion resistance and a reliable 1,000 N clamping force for secure bench work; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kombispanner 712 — horizontal-foot combination clamp, galvanised, lever operation (Kukamet) A robust combination clamp designed for workshop and light industrial bench mounting, the Kombispanner 712 combines a compact build with dependable holding power for a wide range of clamping tasks. Compact combination clamp for workshop use Galvanised finish for corrosion protection 1,000 N clamping and holding force Horizontal-foot mounting for bench installation Secure clamping where consistency matters The clamp delivers a defined clamping force of 1,000 N, providing repeatable pressure for jigs, fixtures and assembly tasks. The measured holding force ensures components remain stationary during machining or inspection, reducing rework and downtime. Where process stability is essential, the lever-style actuator gives quick engagement and clear tactile feedback, turning manual clamping into a predictable, efficient step within production sequences. Built for durable, space-saving integration With a galvanised finish and a horizontal foot for bench mounting, this clamp resists workshop environments while occupying minimal space. The lightweight construction (approx. 0.405 kg) enables easy retrofitting into existing fixtures or portable test rigs without heavy modification. The lever mechanism is designed for rapid operation, supporting frequent clamp/unclamp cycles while keeping setup times short and shop-floor ergonomics straightforward. Practical advantages for purchasing and implementation Sourcing through Metav brings operational benefits beyond the component itself: centralised availability from Emmerich, a broad product range and a documented track record in precision supplies support predictable procurement and stock management. For technical questions or to verify suitability with specific fixtures and materials, Metav’s advisory team can supply application guidance and additional specifications by email or phone. Contact Metav Werkzeuge today to secure the Kukamet Kombispanner 712 and ensure reliable, repeatable clamping in your workshop — advice and order support available from Metav Werkzeuge. Technical data Article number: 712-1 GTIN: 8680731504293 Brand: Kukamet Facts Weight: 0.405 kg Maximum clamping force: 1,000 N Maximum holding force: 1,000 N eClass: 21041716 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Operation: lever clamp style Category: clamp FAQ What maximum clamping force does this clamp provide? The Kombispanner 712 (Kukamet clamp, SKU 712-1) offers a maximum clamping force of 1,000 N and an equivalent holding force for secure fixation. Is the clamp suitable for bench mounting? Yes, the unit features a horizontal foot for bench or fixture mounting, designed to integrate with workbenches and jig plates. What finish protects the clamp against corrosion? The clamp is supplied with a galvanised finish, improving resistance to workshop humidity and general corrosion. Can the clamp be used for frequent clamp/unclamp cycles? The lever clamp operation is suited to repetitive manual use; the design supports rapid engagement while maintaining consistent clamping pressure. Who supplies the clamp and where can technical advice be obtained? The clamp is supplied by Kukamet and distributed via Metav Werkzeuge; for technical queries, Metav Werkzeuge can be contacted for application advice. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000 N Combination Clamp Horizontal Foot, Zinc Plated, 0.4 kg - Kukamet
A compact galvanised combination lever clamp that provides up to 1,000 N clamping and holding force and mounts via a horizontal foot for secure, repeatable fixturing. Order the Kombispanner 711 directly via Metav Werkzeuge or ask our consultants for detailed specification support. Kombispanner 711 — galvanised combination lever clamp with horizontal-foot mount (Kukamet) The Kombispanner 711 is a robust, compact combination lever clamp designed for light- to medium-duty workshop fixtures and production jigs, offering fast setup and reliable holding performance. Galvanised finish for corrosion resistance 1,000 N clamping/holding force Horizontal-foot mount for bench fitting Lightweight at 0.4 kg for easy handling Secure clamping that reduces setup time The combination lever clamp delivers dependable holding power with a rated 1,000 N clamping and holding capacity, enabling secure fixation of small workpieces during machining, assembly or inspection tasks. The galvanised finish provides corrosion resistance, keeping contact surfaces stable over repeated cycles and reducing the need for frequent replacement. Designed for repetitive use, this clamp shortens fixture build time and lowers the risk of movement during processing, contributing directly to improved process stability and fewer scrapped parts. Flexible mounting and straightforward operation The horizontal-foot mounting arrangement allows bench or fixture-plate attachment with simple fastening, making the clamp suitable for modular jig systems and bench fixtures. With a weight of 0.4 kg, the component is easy to position and handle during setup yet substantial enough to remain vibration-resistant in typical workshop environments. The device separates clamping action from holding action: clamping force refers to the pressure applied during engagement, while holding force indicates the residual resistance against displacement once the clamp is engaged. This distinction helps in selecting the correct fixture strategy and in calculating safety margins for delicate components. Low maintenance and dependable supply for professional use Galvanised steel construction ensures long service life with minimal upkeep, requiring only occasional inspection and lubrication at pivot points. The simple lever mechanism is engineered for repeatability and can be integrated into manual or semi-automated workflows. Backed by Metav’s quality filter and European distribution from Emmerich, this clamp benefits from reliable stock management and consistent product quality—factors that support uninterrupted production. Metav’s experience and broad product range further simplify procurement and spare-part planning for industrial and trade customers. For personalised advice on integrating the galvanised Kukamet combination lever clamp into existing fixtures, contact Metav Werkzeuge for expert procurement and technical consultation. Technical Data Article number: 711-1 GTIN: 8680731504286 Facts Clamping force (max): 1,000 N Holding force (max): 1,000 N Weight: 0.4 kg eCl@ss: 21041716 ETIM: EC011973 Special features Material: Galvanised steel Mounting: Horizontal foot Type: Combination lever clamp FAQ What clamping force can be expected from this clamp? The Kombispanner 711 provides a maximum clamping and holding force of 1,000 N, suitable for light- to medium-duty fixtures. Is the clamp suitable for bench mounting? Yes, the horizontal-foot mount is designed for secure bench or fixture-plate attachment and is compatible with standard workshop fastening methods. What material is the clamp made from and how durable is it? The clamp is made from galvanised steel; the coating increases corrosion resistance and extends service life under normal workshop conditions. Can the clamp be used in modular jig systems? The compact design and horizontal-foot fixing make it well suited for integration into modular jig systems and repeatable production setups. What is the article number and brand of this clamp? This product is the Kukamet combination lever clamp, article number 711-1, marketed as the Kombispanner 711. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000 N Pneumatic Clamp Horizontal Foot, Zinc Plated - Kukamet
Compact, galvanised construction combined with a 1,000 N clamping and holding force ensures dependable, repeatable performance in medium-duty fixture applications; order the Kukamet 691 directly via Metav Werkzeuge or consult their specialists for integration advice. Pneumatic clamp 691 by Kukamet — 1,000 N clamping force, galvanised 691 is a pneumatic clamp engineered for horizontal mounting and consistent holding in assembly and jig applications. Galvanised steel construction 1,000 N clamping and holding force Horizontal base for bench mounting Lightweight 0.641 kg for easy integration Consistent force for repetitive production The pneumatic clamp delivers a 1,000 N clamping and holding force that supports repeatable fixtures and short cycle times. Pneumatically actuated motion replaces manual lever operation, which reduces operator variability and speeds up set-up. The measured holding force and actuation principle translate into fewer rejected parts and less rework, improving overall line efficiency. For production planners, the emphasis is on reliable performance under repeated cycles rather than on ad-hoc clamping. Space-saving design that eases fixture integration With a horizontal base and a compact mass of 0.641 kg, the unit integrates into existing jigs with minimal alteration. The low profile of the mounting foot is suited to bench-mounted fixtures and allows close placement of multiple clamps for distributed clamping strategies. The galvanised finish keeps the surface resilient in workshop environments, while the compact envelope reduces the footprint on tooling plates, enabling more flexible layout designs in workholding systems. Durable finish and straightforward specification for procurement A galvanised surface treatment provides corrosion resistance suitable for general industrial atmospheres. The simple specification—actuation type: pneumatic; mounting: horizontal base; material: galvanised steel—facilitates quick comparison during procurement and supports traceable component lists. Identifiers such as SKU 691-1 and GTIN 8680731504965 enable direct ordering and inventory management, reducing administrative overhead for purchasing and workshop stores. Contact Metav Werkzeuge today for application guidance or to secure the Kukamet 691 with 1,000 N clamping capacity for your fixtures Technical data Article number: 691-1 GTIN: 8680731504965 Brand: Kukamet Facts Clamping force: 1,000 N Holding force: 1,000 N Weight: 0.641 kg eClass: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal base Category: Clamps / Spanner SKU: 691-1 FAQ What clamping force does the pneumatic clamp provide? The pneumatic clamp delivers a clamping and holding force of 1,000 N, suitable for medium-duty jigs and assembly fixtures with the Kukamet 691 specification. Is the clamp protected against corrosion? Yes, the unit features a galvanised finish that provides general corrosion resistance appropriate for workshop conditions. How is the clamp mounted in a fixture? The clamp uses a horizontal base for bench or plate mounting, enabling straightforward integration into existing tooling layouts. What identifiers are available for ordering and stock control? The product is listed as SKU 691-1 with GTIN 8680731504965 for procurement and inventory systems. Can the clamp be used for automated production cells? The pneumatic actuation and consistent holding force make the clamp suitable for repetitive automated or semi-automated operations where 1,000 N is sufficient. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000 N Toggle Clamp Horizontal Base Zinc Plated With Hook - Kukamet
Take advantage of a compact, corrosion‑resistant latch clamp that combines a high holding force of 1,500 N with a practical horizontal‑foot mounting and a built‑in hook for secure, repeatable fixturing — available through Metav Werkzeuge or via consultation with our advisors. Latch clamp 331 – horizontal‑foot closure clamp, galvanised (Kukamet) The Latch clamp 331 is a compact closure clamp with a horizontal‑foot base, designed for secure workholding in production jigs, fixtures and general workshop assembly. Horizontal-foot mounting base Galvanised corrosion-resistant finish Holding force 1,500 N Lightweight: 95 g for easy handling Secure clamping capacity for repeatable production The 331 delivers a defined clamping force of 1,000 N and a holding force of 1,500 N, providing measurable stability for repetitive assembly tasks. These values indicate the clamp’s capacity to keep components fixed under load, reducing vibration and the risk of movement during machining or assembly. The thread length 45 mm allows straightforward adjustment of the contact point, so set‑up time is reduced and tolerances can be maintained across batches. This measurable performance supports process reliability and lower scrap rates in small‑ to medium‑scale production. Space‑saving design and corrosion resistance A shallow horizontal‑foot mounting profile permits the clamp to be integrated into tight fixtures and confined workspaces without compromising accessibility. The body is galvanised, offering basic protection against corrosion where indoor shop use or occasional damp conditions occur. The integrated hook facilitates rapid engagement and release, while a mass of 95 g keeps the assembly lightweight for manual positioning or modular fixture construction. These features combine to simplify installation and improve ergonomics when building or modifying jigs. Fits into an efficient supply chain with clear identification The item is listed under SKU 331-1 and carries a GTIN for traceability in procurement and inventory systems. As a compact closure clamp from Kukamet, it is suitable for standard jigging and fixture applications where consistent repeatability is required. Procuring the clamp via Metav Werkzeuge aligns with a supply approach that values accessibility and dependable fulfilment — a practical choice for workshops that require straightforward, verifiable tooling from a single source. Request product specification advice from Metav Werkzeuge to confirm suitability of the Kukamet latch clamp 331 for specific fixtures — contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 331-1 GTIN: 8680731502411 eCl@ss: 21041718 ETIM: EC011973 Facts Weight: 0.095 kg Holding force: 1,500 N Clamping/pressing force: 1,000 N Thread length: 45 mm Special features Material: galvanised Mounting: horizontal foot With hook: yes Manufacturer: Kukamet FAQ How much holding force does the clamp provide? The latch clamp 331 provides a holding force of 1,500 N and a clamping force of 1,000 N, giving secure retention for typical jigging and assembly tasks. What mounting does the clamp require? Mounting is via a horizontal‑foot base suitable for attachment to flat fixture plates or bench surfaces. Is the clamp corrosion resistant? The clamp is galvanised, offering protection against corrosion for workshop environments and occasional exposure to moisture. What are the weight and adjustment details? The clamp weighs approximately 95 g and features a 45 mm thread length for adjustable contact positioning. How is the product identified for ordering and inventory? The item is listed as SKU 331-1 and has GTIN 8680731502411 for procurement and stock management purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1000 N Toggle Clamp Vertical Foot Zinc Plated With Hook, 1500 N Holding Force - Kukamet
Combining zinc-plated durability, a vertical-foot mounting for stable fixtures and clearly specified clamping and holding capacities ensures dependable temporary fastening in workshop and production settings; order the unit via Metav Werkzeuge or consult our specialists for configuration advice. 312 latch clamp — vertical-foot toggle clamp, zinc-plated (Kukamet) The 312 latch clamp is a compact toggle-style closure clamp with a vertical foot and hooked end, intended for secure temporary fastening in jigs, fixtures and general workshop applications. Zinc-plated corrosion protection Vertical-foot mounting for stability Max clamping force 1,000 N Hooked design with 1,500 N holding Secure force where it matters The latch provides defined mechanical performance with a clamping force of 1,000 N and a holding force of 1,500 N, values that make it suitable for repeatable fixture tasks and light production use. Specified forces convey predictability in setup and release cycles, reducing rework and downtime. The mechanical toggle action converts operator input into stable clamping pressure, enabling faster part changeover and consistent results in assembly or inspection stations. The design benefits processes that require quick engagement without complex adjustment. Compact footprint for fast integration A vertical foot mounting and a hooked end mean the clamp installs where space is limited and access is vertical rather than lateral. The compact mass (approx. 0.135 kg) and thread length 45 mm allow straightforward attachment to plates or tooling blocks; the short thread provides secure adjustment without excess protrusion. The light weight and reduced profile help keep moving masses low, which is advantageous for fixtures on manipulators or portable jigs. Integration is simplified: the clamp can be positioned, adjusted and locked with standard workshop hardware. Durable finish and straightforward handling Finished in zinc-plated steel for basic corrosion resistance, the clamp resists surface wear in typical workshop environments and requires minimal maintenance. The hooked closure offers reliable engagement with a mating latch or receiver, while the toggle mechanism ensures positive locking under vibration. A robust surface finish and simple mechanical parts make servicing and replacement predictable and cost-effective. For manufacturing contexts seeking reliable, low-complexity clamping, this clamp delivers practical longevity and ease of use. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 312 latch clamp into production fixtures and to arrange prompt supply from our Emmerich centre — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 312-1 GTIN: 8680731502329 Brand: Kukamet EClass: 21041718 ETIM: EC011973 Facts Clamping force: 1,000 N Holding force: 1,500 N Thread length: 45 mm Weight: 0.135 kg Special features Material: zinc-plated Mounting: vertical foot Hooked end for latch engagement Category: clamps FAQ What is the maximum clamping force of the 312 latch clamp? The 312 latch clamp from Kukamet provides a clamping force of 1,000 N and a holding force of 1,500 N (SKU 312-1). Can the clamp be mounted on vertical plates? Yes, the clamp features a vertical-foot mounting that is intended for vertical-plate installation and compact fixture layouts. What material and surface finish does the clamp have? The closure clamp is made from zinc-plated steel, offering basic corrosion resistance suitable for standard workshop conditions. Is the 312 latch clamp suitable for portable jigs? Its compact mass (approx. 0.135 kg) and short thread length (45 mm) make the clamp well suited to portable jigs and light fixtures. How does the hooked end affect function? The hooked end provides positive engagement with a receiver or strike plate, ensuring secure retention when the toggle is closed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
10000 N Druckkraft, waagerechter Fuß Verschlussspanner 341, Gewindelänge 95 mm, Haken, Schwarz brüniert mit Gusskörper - Kukamet
Nutzen Sie die Kombination aus robuster Konstruktion, hoher Druckkraft und einfacher Montage für zuverlässige Spannlösungen in Werkstatt und Produktion. Bestellen Sie den Verschlussspanner direkt über Metav oder fragen Sie unsere Beratung an, wenn technische Details zu Ihrer Anwendung geklärt werden sollen. Verschlussspanner von Kukamet Der Verschlussspanner ist ein kompakter Hebelspanner für präzise Spannaufgaben in Werkstatt und Fertigung, geeignet für wiederholte Montage- und Fixierarbeiten. Kompakte Bauform mit waagerechtem Fuß Druckkraft bis 10.000 N Haltekraft bis 12.000 N Gewindelänge 95 mm Mit Haken für zusätzliche Sicherung Robuste Konstruktion für dauerhaften Einsatz und Belastbarkeit Der Spanner überzeugt durch einen Gusskörper, der in Kombination mit der Schwarz brünierten Oberfläche korrosionsbeständig und verschleißarm arbeitet. Diese Materialwahl sorgt für lange Lebensdauer und reduziert Stillstandszeiten in der Werkstatt. Ein robustes Gehäuse schützt bewegliche Teile, sodass wiederholte Betätigungen auch unter rauen Bedingungen sicher möglich sind. Klare Leistungswerte für planbare Spannkräfte Mit einer maximalen Druckkraft von 10.000 N und einer Haltekraft von 12.000 N bietet der Spanner definierte Kennwerte, die die Auswahl für Spannaufgaben erleichtern. Diese Zahlen ermöglichen eine zuverlässige Berechnung von Belastung und Sicherheit bei Vorrichtungen und Montagearbeiten. Anwender profitieren von der Planbarkeit und können Spannprozesse effizienter auslegen. Schnelle Montage durch durchdachte Befestigungsdetails Die Befestigungsart mit waagerechtem Fuß und die Gewindelänge von 95 mm erlauben eine flexible Integration in Vorrichtungsplatten und Spannvorrichtungen. Dank der Bauform lässt sich der Spanner zügig positionieren und festschrauben, wodurch Rüstzeiten reduziert werden. Der integrierte Haken bietet zusätzliche Sicherung bei beweglichen Bauteilen und erhöht die Betriebssicherheit. Vielseitiger Einsatz und passende Zielgruppe Als kompakter Hebelspanner richtet sich das Produkt an Industrie, Handwerk und Fachhandel, die stabile und schnell montierbare Spannlösungen benötigen. Mit einem Gewicht von 1,05 kg ist der Spanner ausreichend robust und dennoch handlich für Mobilität auf der Werkbank. Die Kombination aus Materialien und Kennwerten macht ihn zur praktischen Wahl für Serienmontage und Einzelbearbeitung. Metav empfiehlt den Verschlussspanner von Kukamet für Anwender, die Wert auf definierte Spannkräfte und schnelle Montage legen; bei Fragen erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 341-3 Marke: Kukamet Bezeichnung: Verschlussspanner 341 Daten Druckkraft maximal: 10000 N Haltekraft maximal: 12000 N Gewindelänge: 95 mm Gewicht: 1,05 kg Besonderheiten Befestigungsart: waagerechter Fuß Material: Schwarz brüniert mit Gusskörper Mit Haken: Ja Storytrigger: hebelspanner ECLASS: 21041718 (Industrieklasse) ETIM: EC011973 (Klassifikation) FAQ Wie hoch ist die maximale Druckkraft des Spanners? Die maximale Druckkraft beträgt 10.000 N; der Verschlussspanner von Kukamet (SKU 341-3) ist damit für viele Spannaufgaben in Werkstatt und Montage ausgelegt. Ist der Spanner für mobile Einsätze geeignet? Ja, mit einem Gewicht von 1,05 kg ist der Spanner handlich genug für den flexiblen Einsatz auf der Werkbank und in Vorrichtungen. Welche Befestigungsoptionen bietet der Spanner? Der Spanner verfügt über einen waagerechten Fuß mit einer Gewindelänge von 95 mm, was eine einfache Integration in Spannplatten und Vorrichtungen ermöglicht.
Horizontalspanner 111 mit waagerechtem Fuß
Technische Übersicht: Hersteller: Kukamet Bezeichnung: Horizontalspanner Material: Edelstahl oder Verzinkt je nach Ausführung Abmessung Andruckspindel: M10x70 - M8x50 Befestigungsart: waagerechter Fuß Maximale druckkraft: 450 N - 4500 N Gewicht: 0,042 kg - 1,58 kg Haltekraft Max.: 520 N bis 5000 N Mit massivem Arm Mit Sicherheitsverriegelung Bestelle jetzt bequem online Horizontalspanner!
100mm Pneumatic Clamp Horizontal Base, 3,000 N Thrust, 95° Arm, Galvanised – Kukamet
The combination of a 100 mm heavy-duty arm, up to 3,300 N holding force and a zinc-plated, corrosion-resistant construction ensures consistent, repeatable clamping in production environments; order the clamp directly via Metav Werkzeuge or consult our technical advisers for application guidance. Pneumatic clamp 631 — Kukamet, 100 mm arm, zinc-plated The Pneumatic clamp 631 is a pneumatic clamping device engineered for robust fixture work and repetitive clamping tasks in industrial and workshop settings. 100 mm heavy-duty arm Horizontal base mounting Up to 3,300 N holding force Zinc-plated corrosion resistance Secure, repeatable clamping for continuous production The pneumatic design delivers a controlled actuation with a max. actuation force of 3,000 N and a holding force of 3,300 N, offering reliable retention for series production. This level of clamping stability reduces part movement during machining and assembly, decreasing scrap rates and increasing process reliability. The pneumatic actuation provides consistent stroke motion and repeatability, which is especially valuable where manual clamping would introduce variability. For users less familiar with pneumatic systems, the key point is that the actuator converts compressed air into a steady mechanical force that maintains workpiece position without continuous manual intervention, supporting higher throughput and predictable cycle times. Robust construction for long service intervals Built with a massive holding arm and finished in zinc-plated material, the clamp resists wear and corrosion in demanding shop-floor conditions. The heavy-duty arm reduces flex under load and helps maintain precise alignment over repeated cycles, lowering the frequency of adjustments and unscheduled maintenance. The corrosion-resistant surface treatment extends component life in humid or industrial atmospheres, while the sturdy design minimises the risk of deformation under sustained clamping loads. As a result, maintenance intervals are extended and total life-cycle cost is reduced compared with lighter-duty alternatives. Flexible mounting and practical reach for fixtures The clamp features a horizontal base for secure mounting and a lever geometry with a 95° operating angle, providing accessible clearance in tight jig assemblies. The 100 mm arm grants useful reach for a variety of part sizes and tooling arrangements, allowing integration into custom jigs, fixture plates and automated cells. The compact footprint and standard base make it straightforward to position the device where repeated access and unobstructed tool paths are required. The mechanical simplicity of the lever-style clamp supports straightforward retrofitting into existing fixtures without complex redesign. Dependable supply and industrial readiness Supplied by Kukamet and distributed via Metav Werkzeuge, the clamp is positioned for workshop and industrial environments where consistent availability and verified quality matter. Metav’s role as a quality filter for the European market, combined with a broad product range, supports reliable procurement and reduced supplier complexity. The device’s measurable parameters — arm length, actuation and holding forces and mounting type — provide a clear basis for specifying and verifying suitability for production tasks, aligning purchasing decisions with technical requirements and operational goals. Discuss application requirements with Metav Werkzeuge to ensure the Kukamet Pneumatic clamp 631 meets individual fixture demands and to receive tailored procurement advice from our technical consultants Technical Data Article number: 631-4-D-C1 Product name: Pneumatic clamp 631 Manufacturer: Kukamet Facts Arm length: 100 mm Actuation force max: 3,000 N Holding force max: 3,300 N Angle: 95° Special features Mounting: horizontal base Material: zinc-plated Massive holding arm Category: Clamping devices FAQ What clamping forces can be expected from the 631 clamp? The Kukamet Pneumatic clamp 631 provides a max. actuation force of 3,000 N and a holding force of up to 3,300 N, suitable for demanding fixture applications. How is the clamp mounted in a jig? The device uses a horizontal base mounting, allowing secure attachment to fixture plates and jig blocks for stable operation. Is the clamp suitable for harsh shop-floor conditions? Yes, the zinc-plated finish and robust arm design give the Pneumatic clamp 631 improved corrosion resistance and durability in industrial environments. What advantages does the 100 mm arm provide? The 100 mm arm offers extended reach and clearance in fixtures, enabling access to a wider range of part geometries without obstructing tooling. Who supplies and distributes this clamp in Europe? The clamp is manufactured by Kukamet and distributed via Metav Werkzeuge; the SKU is 631-4-D-C1 for order and specification purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Pneumatic Clamp Vertical Handle Massive Holding Arm 3,000 N Force 3,300 N Hold Zinc-Plated, 90° - Kukamet
Take advantage of the combination of robust holding force, a galvanised, maintenance-friendly design and a compact 100 mm arm for reliable, repeatable clamping in production. Order the unit directly via Metav Werkzeuge or consult our experts for specification support. Pneumatikspanner 651 — Pneumatic toggle clamp with vertical handle and solid holding arm (Kukamet) The Pneumatikspanner 651 is a pneumatic toggle clamp designed for secure, repeatable workpiece holding in production, assembly and fixture applications, featuring a vertical handle and a massive holding arm. Vertical handle for ergonomic actuation Massive holding arm for stable clamping Up to 3,300 N holding force Galvanised finish for corrosion resistance Reliable clamping that keeps processes moving The pneumatic toggle clamp delivers a clear, measurable benefit: repeatable clamping with a maximum holding force of 3,300 N and actuator pressure capability up to 3,000 N. This translates into consistent part positioning and reduced scrap rates on the production line. The closed clamping geometry and robust toggle mechanism ensure that clamping force is maintained throughout machining or assembly cycles, supporting faster cycle times and predictable throughput. Built to last — less maintenance, more uptime Constructed with a galvanised finish and a solid holding arm, the clamp resists corrosion and mechanical wear in workshop environments. The vertical handle and substantial arm profile reduce flex during operation, which lowers the frequency of adjustments and extends service intervals. As a result, fixture maintenance time is decreased and the overall equipment availability improves — a direct contribution to production reliability and lower long-term running costs. Compact mounting with flexible integration Designed for vertical-base installation, the unit features a vertical foot for straightforward attachment to jigs and fixtures. The 100 mm arm length and fixed 90° clamp orientation make the device suitable for tight work envelopes while still providing ample reach for typical assembly and holding tasks. The compact footprint and standard mounting arrangement simplify retrofitting into existing fixtures and support modular jig design. Pneumatic actuation for controlled, safe operation Pneumatic actuation provides smooth, controllable motion and predictable force output, separating pressure force from the resulting holding force so that process engineers can match supply pressure to application requirements. The toggle action gives positive mechanical locking at full stroke, improving safety in automated cells and reducing the risk of accidental release during machining. Where repeatability and operator safety matter, the clamp’s design supports both objectives without complex controls. Contact Metav Werkzeuge for tailored technical advice on the Kukamet Pneumatikspanner 651 and to arrange prompt supply from our Emmerich distribution centre Technical Data Article number: 651-4-H-D-C1 Product name: Pneumatikspanner 651 Category: Spanner SKU: 651-4-H-D-C1 Facts Arm length: 100 mm Holding force max: 3,300 N Pressure force max: 3,000 N Angle: 90° eClass: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Vertical handle and massive holding arm Massive arm construction Lever-style (toggle) clamp design FAQ What is the maximum holding force of the clamp? The Pneumatikspanner 651 provides a maximum holding force of 3,300 N, suitable for a wide range of fixturing and assembly tasks. How is the clamp mounted to a fixture? Mounting uses the clamp’s vertical foot design, allowing direct attachment to vertical plates or jig bases for stable installation and easy integration. Which materials is the clamp suitable for in production use? The clamp’s robust design and galvanised finish make it suitable for general industrial applications, including repeated use in metalworking and assembly environments. Does the clamp require special maintenance? Routine checks of pneumatic connections, a visual inspection of the solid holding arm and occasional lubrication of pivot points are recommended to maintain performance; the galvanised finish reduces corrosion-related upkeep. Can the clamp be used in automated cells? Yes — pneumatic actuation and the toggle locking action offer controlled movement and secure holding that integrate well with automated production and assembly systems; reference SKU 651-4-H-D-C1 for ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp Three-Point Heavy-Duty Holding Arm With Safety Lock, 1.5kN Thrust - Kukamet
Take advantage of the combination of robust clamping power, a compact 68 mm arm and a secure safety lock for reliable fixture performance. Order the 241 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 241 Vertical Clamp — Horizontal-base toggle clamp with safety locking and 68 mm arm The 241 Vertical Clamp is a durable horizontal-base toggle clamp designed for secure workpiece retention in jigs, fixtures and assembly stations, delivering high holding capability in a compact format Horizontal base for stable mounting 68 mm heavy-duty holding arm Holding force 5,000 N for secure clamping Safety locking mechanism for process security Consistent clamping force for reliable production flow The vertical toggle unit offers a clear technical advantage through its high holding force of 5,000 N combined with a maximum pressing force of 1,500 N, which together ensure stable clamping without frequent readjustment. This consistent mechanical performance reduces cycle variability in repetitive assembly or welding operations and supports process reliability. The compact 68 mm arm keeps the fixture footprint small while transferring clamping energy efficiently, allowing shorter clamp travel and faster repositioning in automated or semi-automated setups Integration made straightforward for jig and fixture builders Mounting is effected via a horizontal base, which simplifies alignment on flat fixture plates and ensures predictable load paths under dynamic conditions. The clamp’s opening angle of 100° and modest weight (1.288 kg) make it suitable for retrofitting into existing tooling layouts where space and mass are constrained. Clear numeric specifications support quick engineering decisions and allow precise calculations for fixture stiffness and cycle kinematics, shortening design iterations and minimising downtime during changeover Built for safety and long service life A massive holding arm and a dedicated safety locking mechanism prevent accidental release during machining or handling operations, addressing occupational safety and minimizing scrap risk. The component is finished in a black blued finish, which offers basic corrosion resistance and an industrial appearance that integrates well with workshop hardware. Robust mechanical construction reduces maintenance intervals and supports a predictable lifetime under regular production loads, contributing to lower total cost of ownership over time Suitable applications and practical benefits This toggle-style clamp is primarily intended for general industrial clamping tasks in assembly, welding fixtures and test rigs where firm retention is essential. The combination of high holding force and compact geometry supports clamping of medium to heavy parts while maintaining easy access for operators and automation tooling. The design balances power and compactness, enabling firms to standardise on a single clamp type across multiple stations and thereby simplify spare parts management and inventory Contact Metav Werkzeuge in Emmerich for a tailored application review or to discuss the suitability of the 241 vertical clamp for specific fixture requirements — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 241-4-D-L-C1 GTIN: 8682843520635 Manufacturer: Kukamet Core technical data Max holding force: 5,000 N Max pressing force: 1,500 N Arm length: 68 mm Opening angle: 100° Weight: 1.288 kg Mounting: horizontal base SKU: 241-4-D-L-C1 Special features Massive holding arm Safety locking mechanism Black blued finish Category: Toggle clamp (vertical) eClass: 21041717 ETIM: EC011973 FAQ What clamping forces can be expected from this toggle clamp? The 241 vertical clamp provides a holding force of 5,000 N and a maximum pressing force of 1,500 N, values suitable for medium to heavy-duty fixture tasks Is the clamp suitable for retrofitting into existing fixtures? Yes, the horizontal base and compact 68 mm arm length make the clamp easy to integrate into existing jigs and fixture plates Does the clamp include a safety lock? The clamp features a dedicated safety locking mechanism, designed to prevent unintended release during handling or machining What finish does the clamp have and what does it mean for workshop use? The unit is supplied with a black blued finish, offering basic corrosion protection and a durable surface for industrial environments How can Metav Werkzeuge help specify this clamp for an application? Metav Werkzeuge can assist with application assessment and technical matching for the 241 vertical clamp (SKU 241-4-D-L-C1) to ensure the clamp meets the fixture and process requirements Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 2,500 N Closing Force, Vertical Base, Blackened Finish - Kukamet
Take advantage of a compact, high‑force clamping solution that combines 2,500 N holding power with a lightweight design and a vertical foot for secure fixture mounting. Order the clamp directly via Metav Werkzeuge or contact their consultants for application advice. Vertikalspanner 222 – Vertical clamp with 2,500 N clamping force (Kukamet) A Vertikalspanner 222 is a compact vertical toggle clamp for fixed fixturing and assembly tasks, optimised for repetitive positioning and stable holding in workshop environments 2,500 N clamping force for secure hold Vertical foot mounting for stable attachment Blackened finish for corrosion resistance 180° lever angle for versatile handling Reliable hold for repetitive production The 2,500 N rated clamping action delivers precise and repeatable force, making this vertical toggle clamp ideal where consistent fixture pressure is required. The mechanism converts lever travel into a controlled vertical clamp stroke, ensuring repeatable positioning and reduced cycle variation. Designed for use in production jigs and assembly stations, the device reduces setup time and supports uninterrupted workflow by maintaining component placement under load. Compact build with robust surface protection Manufactured with a blackened finish, the clamp resists surface wear and offers improved corrosion protection in everyday workshop conditions. The compact construction and 0.24 kg mass enable easy integration into existing fixtures without significant added weight. A vertical foot mounting provides a secure attachment point on flat surfaces or fixture plates, while the 180° lever articulation allows installation in confined spaces and flexible access during clamping operations. Practical advantages in handling and installation The lever‑actuated design is straightforward to install and operate, supporting quick locking and unlocking during assembly cycles. The simple mechanical concept reduces maintenance intervals and simplifies replacement of worn components. By choosing a mechanically reliable clamp, shops benefit from lower downtime and predictable process behaviour—an advantage for batch work and serial assembly where throughput and consistency matter. Suitable applications and integration notes Engineered for clamping tasks in small to medium production setups, the unit suits fixture plates, jigs and assembly benches where vertical holding is required. The low mass and compact footprint allow implementation in multi‑station fixtures without compromising accessibility. Compatibility with standard fixturing practices means the clamp can be integrated alongside other holding elements for combined functionality and improved process stability. For tailored advice on integrating the Kukamet Vertikalspanner 222 into a production setup, contact Metav Werkzeuge in Emmerich for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 222-2 GTIN: 8680731505917 Material: blackened finish Mounting: vertical foot Max. clamping force: 2,500 N Weight: 0.24 kg Angle: 180 eClass: 21041717 ETIM: EC011973 Facts Clamping force: 2,500 N Weight: 0.24 kg Angle: 180° GTIN: 8680731505917 SKU: 222-2 Special features Blackened (brüniert) finish Vertical foot mounting Lever‑type vertical clamp No additional special features listed Brand: Kukamet FAQ What is the maximum clamping force of the Vertikalspanner 222? The maximum clamping force is 2,500 N; the Kukamet Vertikalspanner 222 is specified for consistent vertical holding at that force. How is the clamp mounted? Mounting is via a vertical foot; the clamp is secured to flat fixture plates or benches using the foot as the primary attachment point. Is the surface treated for corrosion resistance? Yes—the unit has a blackened (brüniert) finish that offers improved surface protection under normal workshop conditions. Can the clamp be used in tight installation spaces? The compact form factor and 180° lever articulation make it suitable for installations with limited space where vertical clamping is required. What identifying information is available for ordering or inventory? Order or reference the item by SKU 222-2 or GTIN 8680731505917 for accurate identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 1.5 kN Closing Force, 5 kN Holding Force, Blackened Steel - Kukamet
Efficient, reliable workholding through a combination of 1,500 N clamping thrust and 5,000 N holding capacity, delivered in a compact vertical-foot design that simplifies fixture mounting; order the Kukamet vertical clamp directly via Metav Werkzeuge or consult our advisors for integration support. Vertikalspanner 224 — Vertical lever clamp with 1,500 N clamping force (Kukamet) The Vertikalspanner 224 is a vertical lever clamp engineered for secure fixturing and quick-action locking in production jigs and fixture plates Holding force up to 5,000 N Clamping force 1,500 N Vertical foot mounting for secure fixing 180° swivel lever, blackened finish Predictable clamping performance for consistent results The device provides clearly defined load values: 5,000 N holding force and 1,500 N clamping force, which allow planners to calculate retention and active engagement separately. The holding figure indicates the static retention capacity when the clamp is locked, while the clamping thrust is the force applied during actuation. This separation supports more accurate fixture design and reduces the risk of workpiece movement during machining, helping to maintain repeatable tolerances across batch runs. Compact mounting that saves space on the fixture plate A vertical foot mounting keeps the unit close to the base, enabling direct attachment to plates and blocks without bulky adapters. At 1.12 kg, the clamp balances low mass and serviceable robustness, making it suitable where compactness and predictable mass distribution matter. The blackened finish provides a uniform surface treatment that helps reduce glare in inspection areas, while the 180° lever travel offers flexible positioning to suit confined layouts and ergonomic loading. Fast, simple operation to accelerate set-up times The clamp follows a lever-actuated mechanism that converts manual input into a repeatable locking action; this lever clamp principle supports quick part changes and consistent engagement force. The quick-action characteristic of the mechanism shortens changeover intervals and simplifies operator workflows in assembly or short-run machining operations. Routine upkeep is straightforward: periodic light lubrication and visual checks at pivot points sustain reliable function and long service life. Designed for fixture integration and traceable procurement Produced by Kukamet, the unit listed under SKU 224-4 is intended for industrial and workshop fixtures where repeatability and a compact footprint are priorities. Traceability is assisted by GTIN 8680731504651, which supports stock control and procurement processes. As a medium-duty workholding element, the clamp complements modular fixturing systems and can be specified where reliable, repeatable clamping is required. Contact Metav Werkzeuge to discuss specification matching and procurement of the Kukamet vertical clamp 224-4 from our Emmerich stock for rapid integration into production fixtures Technical data SKU: 224-4 GTIN: 8680731504651 eClass: 21041717 ETIM: EC011973 Key figures Max clamping force: 1,500 N Max holding force: 5,000 N Angle: 180° Weight: 1.12 kg Features Vertical foot mounting Blackened finish Lever clamp design Category: Clamp FAQ What is the difference between the clamping and holding figures? The clamping figure refers to the active thrust during engagement (1,500 N), while the holding figure indicates static retention after locking (5,000 N) for the Kukamet Vertikalspanner 224-4. Can the clamp be mounted directly to a fixture plate? Yes — the vertical foot mounting is intended for direct attachment to plates or fixture blocks, allowing straightforward integration of the Kukamet vertical clamp 224-4. How much lever travel is available for positioning? The lever provides 180° travel, offering flexible positioning to accommodate part loading and access in confined arrangements. Is maintenance complicated for this clamp? Maintenance is minimal; the Vertikalspanner 224 benefits from light lubrication of pivot points and routine inspection to maintain reliable, repeatable operation. Which applications are typical for this clamp model? The clamp is suited to production jigs, assembly fixtures and medium-duty machining fixturing where compact, repeatable clamping is required; refer to SKU 224-4 for procurement and stock details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com