Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
20mm Push Rod Clamp Horizontal Foot 7.5kN Push 18.45kN Hold Zinc Plated Cast Body - Kukamet
Combine robust zinc-plated construction with a compact footprint and 7,500 N clamping force for dependable fixture performance; the high holding force (18,450 N) minimises movement under load. Order the Push-rod clamp 531 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 531 — horizontal-foot mount, 7,500 N clamping force (Kukamet) The Push-rod clamp 531 is a compact horizontal-foot clamp engineered for secure workholding in jigs, fixtures and general machining applications. Zinc-plated cast body for robust durability Max clamping force 7,500 N for secure fixation Holding force 18,450 N for static load resistance Horizontal-foot mounting for assembly flexibility Secure fixation that reduces rework and downtime A small fixture component can determine process reliability. The device delivers a 7,500 N clamping force through a 20 mm piston diameter, converting operator input into consistent clamp pressure; this means fewer parts shifting during machining and a reduced need for rework. The high holding force of 18,450 N refers to the static resistance against part displacement once clamped, providing measurable assurance for repeatable setups. Such quantifiable performance supports planning and risk reduction in production workflows. Flexible installation for varied fixture layouts The horizontal-foot configuration enables mounting on flat surfaces or frame elements where a vertical base would be impractical. The clamp’s pressure spindle M12x80 allows fine adjustment of contact position and preload, while the modest weight (1.835 kg) keeps the component manageable during assembly and reduces load on subframes. These attributes translate into faster fixture changes and more compact toolstations, supporting lean setup routines and optimised use of workbench real estate. Robust construction tailored to industrial environments Manufactured with a zinc-plated finish over a cast body, the clamp offers corrosion resistance and impact tolerance suitable for workshop conditions. The combination of materials and surface treatment provides longevity with minimal maintenance, so the fixture element remains reliable over repeated cycles. The sturdy build encourages predictable performance in demanding tasks such as milling, drilling and general clamping operations. Practical benefits for everyday workshop use Compact dimensions and a horizontal mounting style enable close-packed fixture designs and permit unobstructed tool access. The clamp’s mechanical simplicity ensures easy inspection and straightforward replacement of wear parts if ever necessary, lowering lifecycle costs. Clear numeric specifications aid integration into quality documentation and allow engineers to compare alternatives objectively, making the component a pragmatic choice for small-batch production and jigs alike. Contact Metav Werkzeuge today to discuss how Kukamet’s 531 push-rod clamp can streamline fixture setups — Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 531-5-Q20 GTIN: 8680731502848 Manufacturer: Kukamet Material: Zinc-plated with cast body Mounting: horizontal foot Facts Max clamping force: 7,500 N Holding force: 18,450 N Piston diameter: 20 mm Weight: 1.835 kg Pressure spindle: M12x80 Special features Zinc-plated finish Cast body construction Horizontal-foot mounting Pressure spindle M12x80 Category: push-rod clamp (fixture component) FAQ What materials is the clamp suitable for in fixture applications? The clamp is designed as a general fixture component and its zinc-plated cast body provides robust performance in typical machining environments; material-specific limits depend on the full fixture design rather than the clamp alone. How is adjustment achieved on the 531 clamp? Adjustment is by the pressure spindle M12x80, permitting precise positioning of the clamping contact and controlled preload for consistent clamp pressure. What is the difference between clamping force and holding force for this device? Clamping force (7,500 N) is the applied force during activation; holding force (18,450 N) denotes the static resistance against displacement once the part is secured by the clamp. Is the clamp suitable for tight fixture arrangements? Yes, the horizontal-foot mounting and compact mass make the clamp appropriate for close-packed fixtures and applications requiring unobstructed tool access. Which SKU should be ordered for this model? Order the item using SKU 531-5-Q20; this identifies the Kukamet push-rod clamp with the specifications listed above. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Push Rod Clamp With M12x80 Pressure Spindle, 7.5kN Thrust / 15kN Holding Force, Horizontal Foot - Kukamet
The galvanised construction, high clamping capacity and compact horizontal-foot mount provide reliable, repeatable fixture performance; order the Kukamet 521 push-rod clamp directly via Metav Werkzeuge or request application advice from their specialists. Kukamet 521 Push-rod Clamp — galvanised design with M12x80 pressure spindle The Kukamet 521 is a robust push-rod clamp designed for fixture and jig use in production and workshop environments, offering secure holding with a horizontal-foot mounting for easy installation. Galvanised finish for corrosion resistance Horizontal foot for secure mounting M12x80 pressure spindle integrated High clamping force: 7,500 N Secure clamping for repeatable production The clamp delivers a maximum clamping force of 7,500 N and a holding force of 15,000 N, providing the necessary pressure for reliable workpiece retention during machining and assembly. These figures indicate how much force the device can apply and resist respectively, which makes it suitable for medium-duty fixtures where consistent repeatability is required. The internal piston Ø 20 mm contributes to stable actuation and even force distribution, reducing micro-movements that can affect tolerances. Durable materials minimise downtime and maintenance Constructed with a galvanised finish, the unit resists surface corrosion in workshop atmospheres and light humid conditions, extending service intervals. The integrated M12x80 pressure spindle is replaceable and enables simple fine adjustment of clamping travel and contact pressure; this design reduces maintenance time and keeps fixtures in production longer. The combination of robust material choice and straightforward serviceability supports continuous operations without frequent part changes. Compact mount for flexible fixture layouts The horizontal-foot mounting allows the clamp to be mounted on flat bases or tooling plates where vertical clearance is limited, making it easier to design compact jigs. At approximately 1.425 kg, the device is light enough for modular tooling yet substantial enough to deliver stable clamping. The lever-style mechanism derived from classic lever clamp design ensures quick actuation and clear open/closed states, helping operators to work efficiently and with fewer handling steps. Practical advantages for workshop integration The clamp's geometry and connection options make it compatible with common fixture concepts: bolting via the horizontal foot and fine-tuning with the M12 spindle mean it can be integrated into existing tooling without bespoke adaptors. The galvanised surface and mechanical simplicity lower lifetime operating costs through reduced corrosion and fewer wear-sensitive parts. When incorporated into a standardised tooling set, the component supports faster set-up times and improved process reliability. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 521 into existing jigs and to obtain detailed application guidance from the Emmerich-based team Technical data Article number: 521-5-Q20 GTIN: 8680731502794 eCl@ss: 21041716 Designation: Push-rod clamp 521 Manufacturer: Kukamet Numeric data Maximum clamping force: 7,500 N Maximum holding force: 15,000 N Piston diameter: 20 mm Pressure spindle: M12x80 Weight: 1.425 kg ETIM: EC011973 Materials / Special features Finish: galvanised Fastening: horizontal foot Clamp type: push-rod / lever-style clamp UID: 521-5-Q20 Asset references: product image and catalogue PDF available FAQ What clamping and holding forces does this clamp offer? The Kukamet 521 push-rod clamp provides a maximum clamping force of 7,500 N and a holding force of 15,000 N, values suitable for medium-duty fixtures and repeatable production tasks. Can the clamp be mounted on flat tooling plates? Yes, the horizontal-foot fastening of the Kukamet 521 is designed for secure mounting on flat bases and tooling plates, enabling compact fixture layouts. Is the pressure spindle adjustable or replaceable? The unit features an M12x80 pressure spindle for fine adjustment of contact pressure and travel; replacement is straightforward if wear requires it. Which environments is the finish suitable for? The galvanised finish on this clamp offers resistance against surface corrosion in workshop environments and light humidity, supporting longer service life without special coatings. How heavy is the clamp and does that affect modular tooling? Weighing about 1.425 kg, the clamp balances portability with solidity, making it suitable for modular tooling where components must be both robust and easy to handle. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Pushrod Clamp Size 1 Small Angle Foot M4x20 Actuating Screw 1000N - AMF
Take advantage of the compact design and 1,000 N holding force together with a 20 mm stroke for reliable, repeatable clamping in confined fixtures; order the AMF push-rod clamp directly via Metav Werkzeuge or ask our consultants for application support. Push-rod clamp No. 6841, size 1, small angled foot (AMF) — compact clamping with 1,000 N holding force The Push-rod clamp No. 6841, size 1, small angled foot (AMF) is a compact clamping element for fixture and workholding tasks where space is restricted and reliable repeatability is required Holding force 1,000 N 20 mm stroke Small angled foot design M12x1.5 mounting thread Secure clamping in tight spaces for higher throughput The compact construction delivers a holding force of 1,000 N and a 20 mm stroke, making this clamp suitable for light to medium fixture tasks where secure retention is essential. The small angled foot reduces the required footprint on the workpiece and fixture plate, enabling effective clamping close to edges or in stacked tooling plates. By converting linear actuation into consistent lateral pressure, this unit supports faster part changeovers and reduced secondary handling, which contributes directly to improved cycle efficiency and less downtime. Simple mounting and predictable repeatability for production use Equipped with a M12x1.5 mounting thread and an M4 x 20 pressure screw, the design facilitates straightforward integration into existing fixtures. Adjustable travel and clear mechanical limits ensure repeatable positioning, while the specified M min./M max. dimensions allow precise alignment during setup. The straightforward mechanical principle requires no electronics or complex maintenance, so installation and routine checks remain fast and cost-effective. For workshop planners, the clamp’s compactness and standardised interfaces simplify stocking and reduce fixture complexity. Robust, low-complexity design supporting workshop reliability A pragmatic, low-complexity construction provides the benefit of consistent performance without elaborate servicing routines. The angled foot geometry offers stable contact and helps to distribute clamping loads evenly, reducing localised wear on the part and clamp. Where repeatability and dependability are priorities, this clamp offers a pragmatic balance between force and form factor. Combined with Metav’s supply chain reliability, the component is a practical choice for assembly jigs, machining fixtures and inspection setups that demand dependable clamping with minimal fuss. Contact Metav Werkzeuge for detailed mounting guidance or to request the AMF push-rod clamp No. 6841 for compact, repeatable clamping — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com; local stock and rapid dispatch from Emmerich ensures reliable delivery Technical Data Article number: 4000833516NW Type: 6841 Product: Push-rod clamp Manufacturer: AMF Packaging unit: 1 Max. clamping/holding force: 1,000 N Numbers / Core technical data Stroke (Hub): 20 mm A: 8 mm B min.: 24.5 mm B max.: 44.5 mm D: 4.5 mm E: 20 mm H: 15 mm H1: 60.5 mm K: 7 mm L1: 91 mm L2: 16 mm M min.: 16 mm M max.: 19.5 mm M2: M12x1.5 N: 30 mm P: 20 mm Designs / Special features Small angled foot Pressure screw M4 x 20 Size: 1 Compact fixture footprint Mechanical actuation, no electronics FAQ What is the maximum holding force of the clamp? The clamp provides a maximum holding force of 1,000 N for secure retention in fixture applications. Which thread is used for mounting the clamp in a fixture? Mounting is via an M12x1.5 thread as specified for the unit. Can the clamp be used where space is limited? Yes, the small angled foot and compact size make the clamp particularly suitable for tight or edge-adjacent clamping positions. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Vertical Clamp Automatic Clamping Height Adjustment, 1100N - BESSEY
Take advantage of a compact, dependable clamping solution that combines automatic clamping height adjustment, a horizontal base foot for stable mounting and a reliable 1,100 N clamping force — ideal for speeding up light assembly and repeatable workholding. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Senkrechtspanner STC-VH Gr.20 – Vertical clamp with horizontal base foot and automatic height adjustment (BESSEY) The Senkrechtspanner STC-VH Gr.20 is a vertical clamp with a horizontal foot, designed for precise, repeatable workholding in light-duty assembly and workshop environments. Automatic clamping height adjustment Max. clamping force 1,100 N Clamping height H1 129 mm Horizontal base foot for stable mounting Consistent hold and measurable performance for efficient production The compact vertical clamp delivers repeatable clamping through its automatic clamping height adjustment, which eliminates manual readjustment between different workpieces and reduces setup time. With a rated 1,100 N of clamping force and an H1 clamping height of 129 mm, the unit provides a verifiable performance envelope that supports predictable cycle times. Described in clear numerical terms, these values let planners and workshop managers compare the clamp directly with alternative workholding solutions and therefore make an evidence-based selection for small-batch production or fixture work. Stable mounting and compact footprint for tight workspaces Featuring a horizontal base foot, the clamping unit mounts securely to benches and fixtures while keeping the vertical profile compact. At only 0.22 kg in mass and specified as size 20, the design minimises added load on jigs and simplifies handling during fixture changes. The low weight and small footprint are especially beneficial where multiple clamps are required on a single jig, enabling closer spacing without loss of stability. This combination supports efficient use of bench space and helps maintain ergonomic access for operators during assembly or inspection tasks. Straightforward operation that reduces setup complexity The automatic height regulation reduces operator steps: no manual shim stacking or repeated measurement is needed to obtain consistent clamping points. For workshops and small production lines, this translates into faster cycle preparation and fewer sources of variation. The device’s simple mechanical principle makes maintenance straightforward and predictable, lowering downtime risks and keeping throughput steady. Where accuracy and speed are priorities, the simplified workflow contributes directly to measurable productivity gains. Durable design and trusted brand background for reliable service life Built under the BESSEY designation and intended for general workshop use, the clamp emphasises durability and dependable function over time. The vertical clamping mechanism is engineered to withstand repetitive use common in assembly, prototyping and light fixture applications. Its robust clamping force and compact design provide peace of mind concerning safety and consistency, while supporting operators who need a reliable fixture element that performs without frequent adjustment. Contact Metav Werkzeuge today for tailored advice on integrating the BESSEY vertical clamp into existing fixtures or to arrange supply directly from Emmerich. Technical data Article number: 4000831136NW Type: STC-VH Label: Senkrechtspanner STC-VH Gr.20 waagrechter Fuß BESSEY Manufacturer: BESSEY Facts Weight: 0.22 kg Clamping height H1: 129 mm Max. clamping force: 1,100 N Packaging unit: 1 Special features Automatic clamping height adjustment Horizontal base foot Size 20 Product type: Vertical clamp (Senkrechtspanner) FAQ What maximum clamping force does the clamp provide? The Senkrechtspanner STC-VH Gr.20 provides a maximum clamping force of 1,100 N, suitable for light to medium holding tasks in assembly and fixture work. Which clamping height is available for this model? The clamp has a specified clamping height H1 of 129 mm, enabling consistent positioning across repeated workpieces. Is the clamp suitable for tight fixture layouts? Yes, the compact design and horizontal base foot make the unit appropriate for close spacing in jigs and benches, while its low mass of 0.22 kg minimises added load. How does the automatic height adjustment benefit production? Automatic height regulation reduces manual setup steps and repeat measurements, improving throughput and reducing variability in clamping position for repetitive workflows. Which brand manufactures this vertical clamp? This vertical clamp is supplied under the BESSEY designation and is intended for workshop and light assembly applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
213mm Vertical Clamp With Safety Lock, Zinc Coated, 2,000N Thrust / 2,500N Hold - Kukamet
Take advantage of a robust, galvanised construction combined with an integrated safety lock and a compact, lightweight design to secure fixtures reliably in confined setups; order the 213 vertical clamp directly via Metav Werkzeuge or contact our consultants for application advice. 213 vertical clamp — Vertical toggle clamp with safety lock and galvanised finish The 213 vertical clamp is a vertical toggle clamp designed for securing workpieces on jigs and fixtures, fitted with an angle base for fixed mounting in industrial and workshop applications. Galvanised finish for corrosion resistance Built-in safety lock for secure clamping 2,500 N maximum holding force Secure clamping for confined workstations The 213 vertical clamp delivers dependable holding performance where space is limited. With a maximum holding force of 2,500 N, the clamp provides stable retention for assembly and welding fixtures, reducing the need for repeated repositioning. The galvanised construction offers corrosion resistance, which extends service life in humid or workshop environments and keeps maintenance needs low. The compact form and low mass (0.47 kg) ease handling during fixture set-up and reduce fixture load without compromising stability. Fast, durable mounting and repeatable positioning Fitted with an angle base, the clamp mounts quickly to plates or brackets, enabling straightforward integration into existing jigs. The pressure spindle is sized M8x50, allowing secure contact adjustment and predictable clamping stroke. These tangible, machine‑oriented features translate into faster fixture assembly and consistent part repeatability, meaning shorter cycle times and fewer rejects on repetitive operations. The galvanised finish and robust mechanism support regular industrial use and long-term reliability. Safe operation and clear functional advantages Operation is enhanced by the safety lock, which prevents accidental release during machining or handling and thereby protects tooling and workpieces. The vertical toggle mechanism provides direct downward force with minimal lever travel, simplifying clamp actuation and improving operator ergonomics. Taken together, the design decisions reduce process interruptions and offer measurable gains in throughput and workplace safety, making this clamp suitable for production workbenches and dedicated fixture systems. For reliable vertical clamping with proven holding force, contact Metav Werkzeuge for tailored advice and secure supply from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data SKU: 213-3-L GTIN: 8680731502015 Manufacturer: Kukamet Core data Weight: 0.47 kg Maximum holding force: 2,500 N Maximum pressing force: 2,000 N Pressure spindle: M8x50 ECLASS: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: angle base Integrated safety lock Category: vertical toggle clamp Story trigger: lever clamp FAQ What applications suit this clamp best? The 213 vertical clamp is appropriate for jigs, assembly fixtures and welding tables where a vertical clamping action and strong retention (2,500 N) are required. How is the clamp mounted to a fixture? Mounting is via the angle base; the 213 installs directly to plates or brackets and is compatible with an M8x50 pressure spindle for contact setup. Does the clamp include a safety mechanism? Yes, the 213 vertical clamp features an integrated safety lock to prevent unintended release during machining or handling. What material is the clamp made from and how does that affect use? The clamp is made from galvanised steel, which provides corrosion resistance and reduces maintenance in workshop environments. Is the holding force sufficient for heavy-duty tasks? With a maximum holding force of 2,500 N, the 213 is suitable for many production and fixture tasks requiring reliable retention. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
215mm Extension Lever Metal For Clamping Levers, 20.5mm Wide x 10mm Thick - Kukamet
Taking advantage of the metal construction and the 215 mm length provides extended reach and increased leverage for lever-clamping tasks; the lightweight design at 0.307 kg keeps handling straightforward and reduces operator fatigue. Order the extension lever directly via Metav Werkzeuge or ask our consultants for compatibility advice. Extension lever 220 — Metal extension arm, 215 mm (Kukamet) A 220 extension lever engineered to extend reach and improve leverage for lever clamps in workshop and industrial clamping applications Robust metal construction 215 mm length for extra reach Lightweight at 0.307 kg Compatible with lever clamps Greater leverage with a compact profile The compact extension lever delivers measurable mechanical advantage where additional reach is required. By extending the lever arm to 215 mm, the component increases torque transmission from existing clamp handles without altering the clamp body, enabling firmer engagement with the same manual input. This characteristic reduces operator effort and helps maintain consistent clamping force across repetitive cycles, supporting reliable production throughput and fewer rework steps. The design is particularly beneficial in confined set-ups where space for the clamp handle is limited but more reach is necessary. Built for workshop reliability and simple maintenance Constructed from metal, the lever is designed for routine industrial use and occasional impact. The solid material choice supports long-term wear resistance and contributes to predictable behaviour under load. At 0.307 kg, the component remains easy to handle during assembly and adjustment while still offering the mass needed for stable operation. The robust construction minimises the need for frequent replacement, reducing downtime and maintenance interruptions in a production environment. Easy integration with existing clamping systems The extension arm is intended for straightforward retrofitting to lever-type clamps and spanners. Clear mechanical interfaces allow for rapid installation, meaning line-side changeovers or jig adjustments can be completed with minimal tooling. The part is identified as SKU 220-6-06-C1, which simplifies ordering and parts management. Compatibility with standard lever clamp assemblies ensures that integration does not require bespoke adapters, keeping installation time and associated costs low. Practical choice for daily workshop use Precision in everyday clamping starts with appropriate tooling: the lever extension supports repeatable set-ups and safer handling by increasing clearance between the operator and the workpiece. Its construction and dimensions make it suitable for a range of general workshop and light industrial applications where enhanced reach and consistent clamp actuation are required. For buyers seeking dependable components from an established supply chain, the product benefits from Metav’s European distribution, which acts as a quality filter and ensures accessible stock and reliable fulfilment. For enhanced reach in lever-clamping applications, request the Kukamet extension lever (220) from Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for availability and expert advice. Technical data SKU: 220-6-06-C1 GTIN: 4061905076831 ECLASS: 21170613 Facts Height: 215 mm Width: 20.5 mm Thickness: 10 mm Weight: 0.307 kg Materials & features Material: Metal Category: Spanner Manufacturer: Kukamet Asset: 220-2-06-main.jpg FAQ How does the extension lever 220 increase clamping leverage? The extension lever 220 increases lever arm length to 215 mm, raising torque for existing lever clamps and allowing firmer clamp engagement with the same manual input. Is the extension arm suitable for heavy industrial use? The part is made from metal and designed for workshop and light industrial environments; it offers robust behaviour under routine loads but is not specified as a heavy-duty machine element. Which SKU should be ordered to replace or add this accessory? Order SKU 220-6-06-C1 for the Kukamet extension lever 220 to ensure correct fit and traceability. Can the lever be fitted to different clamp brands? The extension is compatible with standard lever clamps and spanners; its design allows retrofit to common clamp assemblies without bespoke adapters. What are the exact dimensions to check for fitment? Key dimensions are height 215 mm, width 20.5 mm and thickness 10 mm; use these values to verify mechanical clearance and mounting geometry. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
217mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 90° Angle - Kukamet
Benefit from robust clamping with a 217 mm reach, a 5,000 N holding force and a secure safety lock to maintain consistent workpiece position in production. Order the (Kukamet 113 horizontal toggle clamp) directly via (Metav Werkzeuge) or ask our consultants if needed. Kukamet 113 Horizontal Toggle Clamp — 217 mm arm, 5,000 N holding force Kukamet 113 horizontal toggle clamp designed for demanding workshop and light industrial clamping tasks where repeatable, safe fixation is essential. Massive holding arm for secure clamping Safety locking mechanism prevents opening 217 mm arm for wide reach Angle base for stable mounting Reliable holding capacity for consistent production The clamp offers a combination of high holding force and compact design that supports steady machining and assembly processes. With a 5,000 N holding force and a 4,500 N clamping force, the unit secures medium to heavy workpieces without frequent readjustment, reducing cycle time and rework. Its measured mass and geometry contribute to repeatable results on jigs and fixtures, making the device suitable for general workshop tasks and small-batch industrial production where stability and speed matter. Built for safety and long service life A massive holding arm and an integrated safety lock deliver both mechanical strength and operational confidence. The locking mechanism prevents unintentional release under vibration or sudden loads, which reduces scrap and improves operator safety. The component carries a black blued finish that offers basic corrosion resistance and a professional appearance while maintaining serviceability. The clamp strikes a balance between robustness and straightforward maintenance for everyday use. Flexible mounting and practical handling The right-angle angle base provides a stable mounting footprint and straightforward integration into fixtures, pallets or bench plates. The 217 mm arm extends reach without compromising leverage, enabling secure clamping of larger parts or assemblies. At a weight of 1.84 kg the unit remains easy to position during set-up yet substantial enough to resist deflection under load. Suitable for fabrication, welding jigs and assembly stations, the clamp supports efficient workflows and enhanced process control. For durable, safety-focused clamping opt for the Kukamet 113 and contact Metav Werkzeuge for ordering and installation advice — info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: B113-5-D-L-C3 SKU: B113-5-D-L-C3 ETIM: EC011973 eClass: 21041719 Facts Arm length: 217 mm Weight: 1.84 kg Clamping force (max): 4,500 N Holding force (max): 5,000 N Angle: 90° Special features Material / finish: black blued finish Mounting type: angle base Massive holding arm Safety locking mechanism Suitable for lever clamp applications FAQ What is the maximum holding force of this clamp? The Kukamet 113 horizontal toggle clamp provides a maximum holding force of 5,000 N, suitable for a range of workshop and light industrial tasks. Can the clamp be mounted on custom fixtures? Yes, the clamp’s angle base allows straightforward mounting on fixtures, pallets or bench plates for bespoke jigs and workholding solutions. What finish does the clamp have and how does it affect durability? The unit features a black blued finish, which provides basic corrosion resistance and a durable surface for everyday workshop environments. Is this clamp suitable for repetitive production use? The combination of massive holding arm, safety lock and robust forces makes this clamp well suited to repetitive clamping in assembly and machining operations. Which applications are best suited to this type of clamp? Typical uses include welding jigs, assembly stations and general fabrication where secure, repeatable holding and quick operation are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
218.5mm Vertical Clamp With Angle Base, Massive Holding Arm, 4.5kN Thrust, 5kN Hold - Kukamet
Combine robust clamping performance with a compact footprint: the 213 Vertical Clamp delivers a massive holding arm, up to 5,000 N static holding force and a 218.5 mm reach for secure fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 213 Vertical Clamp – Vertical lever clamp with 5,000 N holding force and 218.5 mm arm (Kukamet) The 213 Vertical Clamp is a vertical lever clamp designed for secure fixturing in workshop and light industrial applications, featuring a solid holding arm and a right‑angle mounting base for fixed installation Robust solid holding arm for heavy loads Up to 5,000 N static holding force 218.5 mm reach for deeper fixtures Right-angle base for fixed mounting Consistent, measurable clamping for repeatable processes The clamp provides clearly defined mechanical performance: a holding force of 5,000 N and a closing force of 4,500 N, values that translate directly into reliable workholding during machining and assembly. These figures indicate the permissible static and actuation loads, allowing planners to calculate fixture safety margins and cycle security. The solid holding arm reduces deformation under load, so clamping remains consistent across repetitive operations. Small footprint, flexible installation for workshop integration With a reach of 218.5 mm and a right‑angle mounting base, this clamp integrates into compact fixture layouts while keeping the working envelope accessible. The right‑angle base permits secure bolting to machine tables or fixture plates without additional adapters. At approximately 1.836 kg, the unit balances heft for stability with manageable handling during assembly of jigs and fixtures. Durable finish and simple lever action for low maintenance A black oxide finish provides surface protection and reduces glare in a workshop environment, while the lever‑type actuation offers rapid clamp/unclamp cycles for high throughput. The combination of a massive holding arm and solid mechanical construction reduces wear on moving parts, supporting longer service intervals and predictable maintenance planning. Where quick, repeatable clamping is required, the lever mechanism preserves cycle time without sacrificing grip. Designed for reliable workshop performance Engineered as a vertical acting clamp, the device suits general clamping tasks in metalworking and workshop contexts where repeatability and clear force ratings matter. The compact design and robust components support use in fixtures, assembly stations and prototyping benches, providing a pragmatic solution for production and repair environments that prioritise measurable results over guesswork. Select the Kukamet 213 Vertical Clamp for reliable, repeatable clamping — contact Metav Werkzeuge for application-specific advice or to arrange purchase via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B213-5-D-C3 GTIN: 8680731508086 Manufacturer: Kukamet Core specifications Arm length: 218.5 mm Holding force: 5,000 N Closing force: 4,500 N Weight: 1.836 kg eClass: 21041717 ETIM: EC011973 Special features Mounting type: Right-angle base Finish: Black oxide Massive holding arm Lever clamp (vertical actuation) Category: Clamping devices FAQ What maximum holding force does the clamp provide? The 213 Vertical Clamp offers a maximum static holding force of 5,000 N and a closing (actuation) force of 4,500 N for predictable workholding. How is the clamp mounted? Mounting is via a right‑angle base enabling secure bolting to fixture plates and machine tables. What is the effective reach of the clamping arm? The clamping arm extends 218.5 mm, providing clearance for deeper or recessed workpieces. What is the unit weight and how does that affect fixture design? Weight is approximately 1.836 kg; the mass supports fixture stability while remaining manageable for assembly. What finish and construction features support durability? A black oxide finish and a solid, massive holding arm provide surface protection and reduced deformation under load. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
218.5mm Vertical Clamp With Angle Foot, Massive Holding Arm, 4.5kN Thrust 5kN Holding Force, Galvanised - Kukamet
Take advantage of a robust clamping solution with a massive holding arm, galvanised corrosion protection and a 5,000 N maximum holding force for secure fixture set-ups; order directly via Metav Werkzeuge or consult our specialists for application advice. 213 vertical clamp by Kukamet — massive holding arm, 5,000 N holding force The 213 vertical clamp is a compact vertical clamping device designed for workshop jigs and fixture tables, offering a long reach and reliable repeatability for small- to medium-scale production tasks. Massive holding arm for stable clamping 218.5 mm arm reach for deep applications Galvanised steel construction for corrosion resistance 5,000 N maximum holding force Secure clamping for repeatable production quality The clamp is engineered for consistent, repeatable holding: the 5,000 N maximum holding force and a separate 4,500 N pressing capacity ensure workpieces remain stable during machining and assembly. The heavy-duty arm provides mechanical advantage for lever-actuated locking, reducing the chance of part movement under cutting forces. For operators transitioning from manual setups, the device’s straightforward function reduces setup time and contributes to predictable cycle times on the shop floor. The combination of defined clamping forces and rigid construction supports quality control and reduces rework. Flexible installation and clear specifications for fixture design Mounting is via an angle foot, enabling secure attachment to t-slotted tables, plates or custom subplates; the 218.5 mm arm length extends reach into deeper jigs while keeping the overall footprint compact. The nominal mass of 1.836 kg balances robustness with ease of handling during fixture assembly. Numeric values such as arm reach and rated forces are provided to aid CAD layout and strength calculations during fixture design, allowing planners to position clamps with adequate spacing to avoid deformation or interference in multi-clamp assemblies. Durable finish and low-maintenance operation for workshop conditions A galvanised surface finish protects components from corrosion in industrial environments and minimises surface wear during repetitive use. The heavy holding arm is designed for mechanical resilience, reducing sensitivity to knocks and frequent actuation. Maintenance is primarily visual inspection and light lubrication at pivot points; this straightforward care routine keeps downtime low and supports long service life, making the clamp a practical choice for maintenance shops, toolrooms and small production lines. For reliable delivery from our Emmerich stock and application support for Kukamet clamping solutions — contact Metav Werkzeuge for tailored advice on integrating the robust 213 vertical clamp into existing fixture systems: phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 213-5-D-C3 GTIN: 8680731502138 Brand: Kukamet Material finish: Galvanised Category: Clamping Facts Arm length: 218.5 mm Holding force max: 5,000 N Pressing force max: 4,500 N Weight: 1.836 kg SKU: 213-5-D-C3 Special features Mounting: Angle foot Massive holding arm Compact vertical clamp design Suitable for workshop and jig fixtures FAQ What clamping force can be expected from this clamp? The Kukamet 213 vertical clamp offers a maximum holding force of 5,000 N with a separate pressing capacity rated to 4,500 N for secure fixture retention. How is the clamp mounted to a fixture plate? Mounting is via the angle foot configuration, allowing the clamp to be bolted to t-slot tables, base plates or bespoke subplates for stable installation. Is the surface finish suitable for industrial environments? Yes, the galvanised finish on the 213 vertical clamp provides corrosion resistance suited to typical workshop and production environments. What is the reach of the clamping arm and how does that affect layout planning? The arm reach is 218.5 mm, which should be considered when spacing multiple clamps to avoid interference and to ensure even distribution of clamping forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
225mm Three-Point Closure Clamping Spindle With Extended Arm, 15kN Thrust / 17kN Holding, Galvanised - Kukamet
Take advantage of a high‑force, corrosion‑resistant clamp that combines secure vertical mounting and extended reach for demanding fixtures; the combination of a 225 mm special arm, 15,000 N pressing force and a durable zinc finish ensures reliable cycle‑to‑cycle performance in production. Order the toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Toggle clamp 333 (333-4-L-M12-C1) — Vertical‑base lever clamp with extended special arm The Toggle clamp 333 is a vertical‑base latch clamp designed for fixture and jig applications where deep or offset clamping is required, offering high pressing and holding forces for secure workholding. Vertical base for secure vertical mounting Extended 225 mm special arm for deep clamping Zinc‑plated finish for corrosion resistance 15 kN pressing force, 17 kN holding capacity Secure, high‑force workholding for stable production Designed for demanding clamping tasks, this lever clamp delivers a rated 15,000 N pressing force and a 17,000 N holding capacity, providing measurable stability for repetitive operations. The stated forces translate into less fixture slippage and fewer rejected parts, improving throughput and reducing rework. The mechanical locking action limits creep under load, so the clamp maintains position without continuous operator input — a practical way to raise process reliability in small series and larger production runs. Reach and mounting flexibility for complex jigs The extended 225 mm special arm and a thread length of 250 mm give additional reach and fine adjustment capability for awkward or deep fixtures. Mounted on a vertical base, the clamp suits upright or panel fixtures where access is restricted from above. The integrated hook allows rapid engagement with mating components, simplifying cycle set‑up and change‑over. For bespoke fixtures, the combination of arm length and thread adjustability enables precise pressure distribution across irregular workpieces. Durable finish and low‑maintenance operation A zinc‑plated surface treatment provides good corrosion resistance in workshop environments, reducing the frequency of surface maintenance and preserving appearance and function over time. At a mass of 1.07 kg, the device balances robustness with easy handling during assembly into jigs or production cells. The simple lever mechanism minimises service points; routine inspection and light lubrication are generally sufficient to sustain reliable performance, supporting long service life and dependable uptime. Choose the Kukamet toggle clamp for robust, high‑reach clamping in production — available from Metav Werkzeuge with technical advice from our Emmerich team. Technical data Article number: 333-4-L-M12-C1 GTIN: 8682843520994 SKU: 333-4-L-M12-C1 Manufacturer: Kukamet Facts Pressing force max: 15,000 N Holding force max: 17,000 N Arm length: 225 mm Thread length: 250 mm Weight: 1.07 kg ECLASS: 21041718 ETIM: EC011973 Special features Material: zinc‑plated Mounting type: vertical base With hook Extended special arm Category: clamp / toggle clamp FAQ What is the maximum clamping force of this clamp? The clamp provides a pressing force of 15,000 N and a holding capacity of 17,000 N, suitable for high‑force fixture applications. Can the clamp be mounted on vertical fixtures? Yes, the vertical base is specifically designed for secure vertical mounting in jigs and panels. How much reach does the clamp offer for recessed workpieces? The extended arm measures 225 mm and the thread length is 250 mm, giving significant reach and fine adjustment for deep or offset workpieces. Is the clamp suitable for workshop environments with occasional moisture? The zinc‑plated finish offers corrosion resistance appropriate for typical workshop conditions; periodic inspection and light lubrication will extend service life. What is the SKU for ordering and spare part references? Ordering and reference information is under SKU 333-4-L-M12-C1 for this Kukamet toggle clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2270N Three-Point Push Rod Clamp With Spring, Galvanised 2200N Thrust Capacity - Kukamet
Take advantage of the combination of high clamping force, compact design and zinc‑plated corrosion resistance for reliable fixture holding in production and assembly. Order the clamp directly via Metav Werkzeuge or contact their consultants for integration advice. 511 Push‑rod clamp with horizontal base and spring action — Kukamet The 511 push‑rod clamp is a compact clamping element designed for secure horizontal mounting in fixtures and jigs, offering rapid spring‑assisted engagement for repeatable workholding. *Horizontal base for stable mounting *Spring‑loaded action for quick clamping *Max clamping force 2,200 N *Zinc‑plated corrosion resistance Consistent holding for faster, safer setups The spring‑loaded mechanism delivers immediate clamp engagement, reducing cycle times in repetitive operations while maintaining a reliable holding force. With a maximum clamping force of 2,200 N and a holding force of 2,270 N, this compact device ensures workpieces remain stable during machining, assembly or inspection, improving throughput and reducing rework. The combination of fast action and strong retention supports efficient production sequences where repeatability is essential. Compact mounting that saves fixture space Featuring a horizontal base, the clamp integrates easily into existing jigs and tooling plates without adding excessive bulk. The low mass of 1.03 kg and compact footprint make this clamp suitable for confined tooling arrangements and lightweight fixtures. The zinc‑plated finish provides corrosion resistance, extending service life in workshop environments and reducing the frequency of maintenance interventions, which supports continuous operation in demanding production schedules. Clear specifications for straightforward integration Key technical attributes such as zinc‑plated material, horizontal mounting and a built‑in spring simplify selection and installation. The clamp’s robust construction offers predictable performance under cyclic loading, while the defined 2,200 N clamping capacity and measured 2,270 N holding force allow planners to calculate safety margins and fixture requirements with confidence. Where documentation is required, the model is listed under SKU 511-6-Y and GTIN 8680731506112 for procurement and inventory control. For tailored advice on using the Kukamet 511 push‑rod clamp in specific fixtures or for purchasing through Metav Werkzeuge, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — their specialists will advise on technical fit and delivery. Technical data SKU: 511-6-Y GTIN: 8680731506112 Manufacturer: Kukamet Weight: 1.03 kg Material: zinc‑plated Mounting: horizontal base Clamping force max: 2,200 N Holding force max: 2,270 N Special feature: with spring eClass: 21041716 ETIM: EC011973 Facts Category: clamp (spanner) Product type: push‑rod clamp Model designation: 511 SKU reference: 511-6-Y Special features Spring‑assisted engagement Zinc‑plated finish for corrosion protection Compact footprint for tight fixtures Suitable for repetitive production and assembly tasks FAQ What maximum clamping force does this clamp provide? The clamp delivers a maximum clamping force of 2,200 N, with a holding force rated at 2,270 N, suitable for typical fixture and assembly applications. Is the clamp suitable for horizontal mounting in fixtures? Yes. The design includes a horizontal base intended for secure attachment to fixture plates and jigs. What material and surface treatment does the device have? The component is zinc‑plated, offering improved corrosion resistance for workshop environments. How heavy is the clamp and how does that affect fixture design? Weighing 1.03 kg, the clamp is compact and lightweight, simplifying integration into smaller or portable fixtures without significantly increasing mass. Can the clamp be used in high‑cycle automated processes? The spring‑assisted action and robust holding figures make the clamp well suited to repetitive cycles; designers should verify compatibility with actuation timing and fixture dynamics. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Three-Point Vertical Clamp With Massive Holding Arm, 5,000 N Holding Force - Kukamet
Benefit from a compact, production-ready clamp offering a massive holding arm, a 230 mm reach and up to 5,000 N holding force for dependable workpiece retention; the horizontal foot provides secure fixture mounting. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 — Kukamet vertical clamp with 230 mm arm and 5,000 N holding force The Vertical clamp 211 is a heavy-duty vertical clamping device with a 230 mm arm and a horizontal foot, designed for secure fixture mounting in workshops and production lines. Vertical clamp »211« by Kukamet 230 mm heavy-duty holding arm Up to 5,000 N clamping force Horizontal foot for secure mounting Reliable clamping power for repetitive production The clamp delivers consistent holding through a clear specification of forces: 5,000 N holding force and 4,500 N pressing force, which translate into stable fixation during machining and assembly operations. This performance reduces rework and rejects by keeping components immobile under load. The combination of force ratings and a 230 mm arm makes the device suitable for medium‑duty jigs where repeatable results and cycle stability are required. Engineers benefit from predictable behaviour under load, enabling process planning with measurable parameters. Easy integration and compact fixture footprint Designed for simple installation, the clamp uses a horizontal foot that secures directly to fixture plates or machine tables, keeping the clamping axis vertical while saving horizontal space. With a mass of 1.567 kg, the component is light enough for modular fixtures yet sturdy in use. The mounting arrangement supports straightforward positioning in standard tooling setups and integration into automated sequences, so line planners can add secure vertical clamping without extensive redesign of existing fixtures. Robust materials and low-maintenance operation Finished in a blackened finish for surface protection, the clamp is built around a massive holding arm that minimises flex and wear in repetitive cycles. The surface treatment reduces corrosion risk in workshop environments and eases cleaning, supporting long-term dimensional stability. The mechanical design focuses on reliability and serviceability: expect minimal upkeep and sustained performance in continuous production runs. Sourcing through an experienced partner ensures steady supply and consistent quality control for workshop inventories. Contact Metav Werkzeuge for expert guidance on the Kukamet vertical clamp 211 — secure supply and precise advice direct from Emmerich, e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B211-5-D-C3 GTIN: 8680731507799 eClass: 21041717 ETIM: EC011973 Facts Arm length: 230 mm Holding force: 5,000 N Pressing force: 4,500 N Weight: 1.567 kg Special features Finish: blackened Mounting: horizontal foot Massive holding arm Category: Clamps Brand: Kukamet FAQ Is this clamp suitable for automated production jigs? The Vertical clamp 211 is designed for fixture integration and, with its horizontal foot and defined force ratings, is suitable for many automated production jigs where vertical clamping is required. What materials is the clamp intended to work with? The clamp provides secure mechanical holding for a wide range of workpieces; specific material suitability depends on the application, but the massive holding arm and force ratings make it appropriate for common workshop metals and assemblies. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot, which fastens to a fixture or machine table using standard fasteners; the arrangement gives a compact footprint and stable clamping axis. What surface protection does the clamp have? The unit is supplied with a blackened finish that offers basic corrosion resistance and reduces surface reflections, aiding longevity in a workshop environment. Can the clamp be used in manual fixtures as well as machine tables? Yes, the clamp’s weight and mounting style allow use in manual jigs and on machine tables; its 230 mm arm and force specification support versatile applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Three-Point Vertical Clamp, Massive Holding Arm, 5,000 N Hold Force, 4,500 N Clamp Force - Kukamet
Take advantage of the combination of robust clamping force, a long 230 mm reach arm and a compact, workshop-ready design for secure, repeatable fixture work; order the clamp directly via Metav Werkzeuge or consult our experts for application advice. Vertical clamp 212 by Kukamet — vertical lever clamp with 230 mm arm and 5,000 N holding force The Vertical clamp 212 is a vertical lever clamp designed for jigs, fixtures and assembly stations where dependable, repeatable holding is required Vertical mounting foot for upright installation Massive holding arm for long-term rigidity 230 mm reach arm for extended clamping range Up to 5,000 N holding force for secure retention Black blued finish for workshop resilience Consistent clamping performance that keeps production moving The clamp delivers a combination of measurable clamping and holding values that support stable processing: a 4,500 N clamping force and a 5,000 N holding force ensure workpieces remain fixed during machining, assembly or inspection. Specified reach of 230 mm gives access to components with deeper profiles while the compact overall mass (approx. 1.552 kg) reduces inertial load on fixtures. These quantifiable characteristics allow planners to predict behaviour in production cells and to size clamping systems against process forces, improving throughput and reducing rework. Built for workshop conditions and long service life Constructed with a massive holding arm and a black blued surface, the device resists wear in daily use and maintains alignment over many cycles. The vertical mounting foot enables direct attachment to plates or tooling blocks, simplifying integration into existing fixtures. Robust mechanical design minimises deformation under load, which in turn supports repeatable positioning and consistent quality over time. Material and finish were chosen to balance durability with cost-effective procurement, supporting a long service life in machine shops and assembly areas. Quick integration and reliable repeatability for fixture systems The vertical mounting concept and lever actuation permit fast mechanical installation and straightforward actuation within assembly sequences. Repeatable clamping is achieved by the rigid arm and defined closure geometry, reducing setup time and eliminating the need for frequent re-adjustment. As a standardised component, the clamp facilitates modular fixture design and predictable maintenance intervals; replacement and retrofitting are simplified by the clear technical data and SKU-based ordering. Contact Metav Werkzeuge today to discuss how the Kukamet Vertical clamp 212 fits into existing fixtures or to arrange supply from our Emmerich distribution centre Technical data SKU: B212-5-D-C3 GTIN: 8682843522387 Manufacturer: Kukamet Weight: 1.552 kg Facts Arm: 230 mm Max clamping force: 4,500 N Max holding force: 5,000 N ECLASS: 21041717 ETIM: EC011973 Special features Massive holding arm Vertical mounting foot Black blued finish Category: Clamps FAQ What is the maximum holding force of the Vertical clamp 212? The Vertical clamp 212 provides a maximum holding force of 5,000 N for secure retention during machining and assembly operations. Can the clamp be mounted upright on tooling plates? Yes, the Vertical clamp 212 is supplied with a vertical mounting foot suitable for attachment to fixture plates and tooling blocks. What are the key dimensions for planning fixture layout? Important planning data for the Vertical clamp 212: arm length 230 mm and overall weight approximately 1.552 kg. Is the surface finish suitable for workshop use? The black blued finish on the Vertical clamp 212 offers enhanced resistance to daily workshop wear and helps reduce visible corrosion in normal conditions. Which SKU should be ordered for this clamp? Order using SKU B212-5-D-C3 for the Kukamet Vertical clamp 212 to ensure the correct version and specification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp 4500N Thrust, 5000N Holding Force, Galvanised, Massive Arm & Safety Lock - Kukamet
Benefit from a robust clamping solution that combines a massive holding arm, a secure safety lock and a zinc‑plated finish for reliable, low‑maintenance operation; order the unit via Metav Werkzeuge or consult the advisers for application-specific guidance. Vertical clamp 212 by Kukamet — 230 mm reach, safety lock Vertical clamp 212 delivers secure vertical workholding for fixtures, jigs and assembly stations. Massive holding arm and safety lock 230 mm reach for deep fixtures Up to 5,000 N holding force Zinc-plated for corrosion resistance Secure clamping that reduces rework and downtime The vertical clamp features a massive holding arm together with a positive safety lock, providing consistent retention during machining and assembly cycles. The unit’s actuation delivers a maximum clamping force of 4,500 N, while the rated holding force of 5,000 N indicates the clamp’s capacity to resist unintended part movement once locked. These values translate into fewer re‑clamps, reduced scrap and improved cycle reliability—advantages that support higher first‑pass yield in production and repeatable results in jigs and fixtures. Compact integration into vertical fixtures and tooling With a 230 mm arm reach and a vertical foot mounting, the clamp integrates easily into space‑constrained setups where vertical securing is needed. The compact mass (approximately 1.32 kg) simplifies handling during assembly of fixture plates and reduces added inertia on moving sub‑assemblies. The lever‑actuated design originating from the lever clamp family ensures rapid engagement and release, supporting shorter takt times on repetitive operations while maintaining secure positioning during downstream processes. Corrosion resistance and straightforward maintenance The zinc‑plated finish offers basic corrosion protection suited to standard shop environments, lowering the frequency of surface care and preserving functional tolerances. The simple mechanical layout and robust construction mean the unit is easy to inspect and service; routine checks of the locking mechanism and pivot points keep the clamp performing to specification. The durable design supports long service intervals, making the component a pragmatic choice for workshops seeking dependable clamping without complex maintenance regimes. Contact Metav Werkzeuge for a technical consultation on the Kukamet 212 vertical clamp (SKU 212-5-D-L-C3) or request application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 212-5-D-L-C3 GTIN: 8680731501827 Manufacturer: Kukamet Facts Arm length: 230 mm Weight: 1.32 kg Max. clamping force: 4,500 N Max. holding force: 5,000 N Material finish: zinc‑plated Mounting: vertical foot Special features Massive holding arm Safety locking mechanism Lever clamp design Suitable for fixtures and jigs FAQ What is the maximum holding force of this clamp? The Kukamet vertical clamp 212 provides a maximum holding force of 5,000 N, ensuring secure retention of workpieces once the safety lock is engaged. How long is the reach of the clamp arm? The clamp features a 230 mm arm, giving extended reach for deeper fixtures and allowing secure clamping in compact assemblies. Is the finish suitable for workshop environments? The unit is zinc‑plated, which offers corrosion resistance for standard workshop conditions and reduces routine surface maintenance. Can the clamp be mounted directly to fixture plates? Yes, the vertical foot mounting is intended for direct integration into fixture plates and jigs, facilitating stable vertical workholding. What distinguishes the safety lock feature? The safety lock prevents accidental release under load; combined with the massive holding arm, it maintains position during machining and handling operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp 4500N Thrust, Massive Arm With Safety Lock - Kukamet
Take advantage of the combination of robust construction, high holding performance and straightforward mounting for dependable clamping in fixtures and jigs; order the unit directly via Metav Werkzeuge or contact their consultants for application advice. Vertical clamp 211 by Kukamet — lever-operated vertical clamp with 230 mm arm and horizontal base The Vertical clamp 211 is a lever-operated vertical clamping device intended for secure holding in jigs, fixtures and assembly stations; it features a horizontal base for stable attachment and a solid holding arm with an integrated safety lock. 5,000 N maximum holding force 4,500 N clamping force 230 mm solid holding arm Horizontal base for stable mounting Reliable clamping performance for repeatable production The clamp achieves a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, providing a stable connection between workpiece and fixture. The distinction between holding and clamping force is important: clamping force refers to the applied pressure that secures a component, while holding force indicates the clamp’s resistance to external loads. This combination ensures consistent repeatability and reduces scrap rates in short-run and series production. Simple integration and compact reach reduce setup time A horizontal base simplifies mounting on plates and fixture beds, while the 230 mm arm extends reach into confined assemblies without adding bulk. The unit’s modest weight of 1.51 kg and compact footprint ease retrofitting into existing tooling. The blackened finish offers basic surface protection and an unobtrusive appearance for industrial environments, supporting fast integration and a tidy workstation layout. Built for safety and long service life The design combines a solid holding arm with a positive safety lock to prevent unintended release during machining or handling, which contributes to safer processes and lower downtime. The lever actuation offers a clear tactile position, making clamp status immediately recognisable; this reduces handling errors and helps maintain consistent cycle times over prolonged use. Versatile function for workshop and production fixtures As a lever-operated vertical clamp, the model suits manual assembly, welding and inspection jigs where a vertical clamping action is required. Its robust construction and compact reach make it appropriate for both repetitive production cells and bespoke workshop fixtures. The mechanical simplicity supports straightforward maintenance and predictable service intervals, helping to keep plant operations running smoothly. Contact Metav Werkzeuge for specialist advice or to secure the Kukamet Vertical clamp 211 for precise fixture applications; Metav Werkzeuge offers proximity from Emmerich and technical guidance for integration into production setups. Technical Data Article number: B211-5-D-L-C3 Manufacturer: Kukamet Data Arm length: 230 mm Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.51 kg Mounting: horizontal base Material/finish: blackened finish eClass: 21041717 ETIM: EC011973 Special features Solid holding arm Safety locking device Lever-operated vertical clamp Massive holding arm and safety locking SKU: B211-5-D-L-C3 FAQ What mounting type is required for this clamp? The clamp is supplied with a horizontal base for stable attachment; the horizontal base is intended for bolting to plate or fixture beds. How much force does the clamp provide? The unit delivers a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N, values specified for the Kukamet Vertical clamp 211 (SKU B211-5-D-L-C3). Does the clamp include a safety feature to prevent accidental release? Yes. The device incorporates a safety locking mechanism combined with a massive holding arm to reduce the risk of unintended opening during processes. Is the finish corrosion-resistant? The product has a blackened finish that offers basic surface protection suitable for typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp 5,000N Holding Force, 4,500N Closing Force, Galvanised, Horizontal Base, Massive Arm & Safety Lock - Kukamet
Take advantage of the combination of a heavy-duty holding arm, galvanised construction and up to 5,000 N holding force for secure, repeatable clamping in production and fixtures. Order the clamp directly via Metav Werkzeuge or consult the technical team for application advice. Vertical clamp 211» – Kukamet» — heavy-duty arm, 5,000 N holding force The Vertical clamp 211 is a compact vertical clamping device for jigs and fixtures, designed for secure bench or fixture mounting with a horizontal base. Heavy-duty holding arm with safety lock Horizontal base for secure fixture mounting Galvanised construction for corrosion resistance 5,000 N maximum holding force Secure, repeatable clamping for production use The robust construction combines a heavy-duty arm with an integrated safety lock, ensuring a positive mechanical hold under repeated cycles. Rated with a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, the device delivers the force levels required for demanding workshop and light industrial applications. The mechanical design reduces the need for frequent re-adjustment, contributing to a smoother production flow and fewer stoppages during setup. Durable mounting and compact installation benefits With a horizontal base for straightforward attachment to fixtures and benches, the clamp provides a compact footprint while retaining stability. The galvanised finish protects the mechanism from corrosion in workshop environments, extending service life and reducing maintenance intervals. Weighing 1.51 kg, the unit is easy to position within fixtures and jigs yet heavy enough to remain stable when in use. The combination of small size and robust materials supports a wide range of fixture designs without costly adaptations. Flexible application across jigs and fixtures Engineered as a lever-style clamping component, the model is suitable for fixturing tasks in assembly, welding, and machining jigs where vertical action and positive locking are required. The clamp’s design supports precise repeatability in fixture cycles, making it a practical choice for production tooling and repair benches alike. For complex integrations or bespoke fixture layouts, technical documentation and mounting recommendations are available to support specification and installation. The Vertical clamp 211 performs reliably as part of modular clamping systems and bench-mounted assemblies. Choose the Kukamet Vertical clamp 211 for dependable, repeatable clamping — contact Metav Werkzeuge in Emmerich for specification support and order coordination: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 211-5-D-L-C3 GTIN: 8680731501452 Manufacturer: Kukamet Facts Arm length: 230 mm Weight: 1.51 kg Max clamping force: 4,500 N Max holding force: 5,000 N eClass: 21041717 ETIM: EC011973 Special features Galvanised material Horizontal foot for mounting Massive holding arm and safety lock Lever clamp design Category: Spanner FAQ What is the maximum holding force of this clamp? The Vertical clamp 211 from Kukamet has a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N. Is the clamp suitable for bench mounting? Yes, the design includes a horizontal foot for secure bench or fixture mounting in jigs and assemblies. What material protects the clamp against corrosion? The clamp is manufactured in a galvanised finish to provide corrosion resistance in workshop environments. Which applications is this lever clamp intended for? The lever-style Vertical clamp 211 is intended for jigs, fixtures and bench-mounted assemblies in light industrial and workshop settings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp Three-Point Heavy-Duty Arm Safety Lock, 4.5kN Press Force - Kukamet
Take advantage of a robust 230 mm holding arm, a 5,000 N maximum hold force and an integrated safety lock to keep fixtures secure and repeatability high; order the clamp through Metav Werkzeuge or consult the technical advisors for application guidance. Vertikalspanner 212 – Vertical toggle clamp with 230 mm arm and 5,000 N holding force (Kukamet) The Vertikalspanner 212 is a vertical toggle clamp designed for secure workholding in welding, assembly and jig fixtures where consistent clamping and fast cycle times are required Robust 230 mm holding arm Up to 5,000 N holding force Integrated safety lock for secure workholding Blackened finish for industrial environments Secure, repeatable clamping that protects tolerances The clamp delivers a clear performance advantage through its 5,000 N holding force and a 4,500 N clamping force, which translate into reliable fixation of components during machining or assembly. These figures describe different functions: the clamping force is the downward force applied by the mechanism, while the holding force is the ultimate resistance to release under load. The result is fewer rejects and shorter set-up times, because workpieces remain stable within jigs and fixtures. For production environments that need consistent part positioning, the vertical toggle design ensures the clamping stroke is compact and repeatable. Robust construction that reduces maintenance and downtime A massive holding arm and a dedicated safety lock make the device suitable for repeated cycles in demanding applications. The solid construction, combined with a modest weight of 1.32 kg, balances durability with ease of handling during fixture assembly. The blackened surface treatment provides a hard-wearing exterior suited to industrial use. Together, these aspects reduce the likelihood of unexpected maintenance and extend service intervals, supporting continuous operation on the shop floor. Easy integration via vertical foot mounting The clamp is supplied with a vertical foot for straightforward mounting in fixtures, enabling simple alignment in vertical planes without complex adapters. The 230 mm arm length gives additional reach for larger assemblies while keeping the clamping action close to the workpiece, which is advantageous in tight jigs. The lever-style actuation allows quick manual engagement and release, making the unit a practical choice for repetitive process steps where speed and accessibility matter. Designed for fixtures, jigs and repetitive production tasks This lever clamp is especially useful in welding jigs, assembly benches and test fixtures where secure, repeatable holding is essential. Supplied under the Kukamet range and available via Metav Werkzeuge, the component is intended for industrial users who prioritise dependable mechanics over temporary solutions. The combination of measurable holding capacity, durable finish and a positive locking system supports safer, more predictable production workflows while aligning with quality-focused procurement strategies. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 212 into fixtures or request a technical datasheet from Metav Werkzeuge in Emmerich by email or phone Technical Data Article number: B212-5-D-L-C3 Designation: Vertikalspanner 212 Manufacturer: Kukamet Facts Arm length: 230 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Weight: 1.32 kg eClass: 21041717 ETIM: EC011973 Special features Material / surface: blackened finish Mounting: vertical foot Massive holding arm Safety lock Category: Spanner FAQ What maximum holding capacity does this clamp provide? The clamp provides a maximum 5,000 N holding force; the specification for the Vertikalspanner 212 indicates reliable resistance to load once engaged. Can the clamp be mounted directly in welded fixtures? Yes, the vertical foot mounting allows the Vertikalspanner 212 to be fastened directly to welded fixtures and jig plates for fixed production setups. Is the safety lock suitable for repetitive automated processes? The integrated safety lock on the Kukamet vertical toggle clamp secures the lever in position, reducing unintended release during repeated manual or semi-automated cycles. What benefits does the 230 mm arm length bring? The 230 mm arm offers extended reach for larger assemblies while keeping the clamp stroke compact, improving accessibility in complex jigs and reducing set-up time. Which environments is the clamp intended for? The device is aimed at industrial and workshop use where robust, repeatable clamping is required; the blackened finish supports durability under regular operational conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp Three-Point Massive Holding Arm, 4 500 N Thrust / 5 000 N Holding Force, Zinc Plated - Kukamet
Take advantage of the combination of a galvanised finish, a massive 230 mm holding arm and reliable clamping forces up to 4,500 N to keep fixtures steady during machining and assembly operations; order the 211 vertical clamp directly via Metav Werkzeuge or consult our advisors for application support. 211 vertical clamp — Kukamet vertical clamp with 230 mm arm and galvanised finish 211 vertical clamp is a heavy-duty vertical clamping device for secure workholding in workshop and production environments, suited to bench or fixture mounting with a horizontal foot. Galvanised finish for corrosion resistance Massive 230 mm holding arm for extended reach Horizontal foot for stable mounting Clamping force up to 4,500 N Robust construction for dependable fixturing The unit combines a galvanised finish with a massive holding arm to deliver long-term resistance to wear and corrosion while maintaining structural integrity. The robust arm extends 230 mm, enabling secure engagement of larger or awkwardly positioned workpieces without sacrificing stability. With a compact overall mass of 1.567 kg, the clamp balances solidity and ease of handling, allowing fast repositioning on assembly jigs while preserving a low footprint on the bench. This design reduces fixture adjustments and supports consistent results across repetitive operations. Measurable performance that supports process reliability Designed for repeatable clamping, the device provides a maximum clamping force of 4,500 N and a holding capability up to 5,000 N, metrics that translate into secure workholding under moderate to high load conditions. The horizontal foot simplifies installation on plate or fixture bases and helps maintain parallel alignment during actuation. These quantifiable figures enable engineering teams to plan fixture capacities and safety margins with confidence, improving cycle reliability and reducing scrap caused by shifting parts. Practical integration into workshop workflows The straightforward mechanical concept and standard mounting footprint make integration into existing setups fast and predictable. The 230 mm arm increases reach without complex subassemblies, while the horizontal foot supports rigid anchoring to tables, plates or custom fixtures. For production environments requiring dependable manual or automated clamping, this solution minimises downtime for setup and maintenance. Where technical advice is required for bespoke fixtures or batch applications, Metav Werkzeuge provides guidance and a wide product range to centralise procurement and streamline supply. Contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the 211 vertical clamp’s suitability for specific fixturing tasks or to request tailored mounting advice. Technical data SKU: 211-5-D-C3 GTIN: 8680731501421 Weight: 1.567 kg Material: galvanised Core specifications Arm length: 230 mm Mounting: horizontal foot Maximum clamping force: 4,500 N Maximum holding force: 5,000 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Category: Spanner Manufacturer: Kukamet FAQ What is the reach of the clamp arm? The clamp features a 230 mm arm, providing extended reach for larger fixtures and off-centre workpieces. What clamping and holding forces are specified? The 211 vertical clamp specifies a maximum clamping force of 4,500 N and a holding capability up to 5,000 N for reliable fixturing. How is the clamp mounted? Mounting is via a horizontal foot, allowing rigid attachment to tables, plates or custom fixture bases. What material and surface treatment does the clamp have? The component is galvanised for enhanced corrosion resistance and durable workshop use. What is the product SKU for ordering or reference? The product is listed under SKU 211-5-D-C3 and is supplied by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust, Zinc Plated - Kukamet
Take advantage of the 5,000 N holding force and 4,500 N pressing capability combined with a galvanised, heavy‑duty arm to secure components reliably during assembly and light machining; the compact 230 mm reach keeps the clamping solution space‑efficient. Order the clamp directly via Metav Werkzeuge or consult our specialists for tailored application advice. Kukamet 212 Vertical Clamp — Galvanised, 230 mm Arm The 212 vertical clamp offers a robust lever clamping solution for fixture plates, jigs and workshop benches where secure, repeatable retention is required Massive holding arm for stable clamping 230 mm arm length for extended reach 5,000 N maximum holding force Galvanised steel body resists corrosion Consistent clamping power for precision work The clamp delivers a maximum holding force of 5,000 N with a pressing capability up to 4,500 N, providing the secure contact pressure necessary for repeatable operations. High, well‑defined forces reduce part movement during finishing or assembly and therefore lower reject rates and rework. Engineers benefit from the straightforward conversion of force figures into setup parameters, enabling reliable process control when reproducing clamping settings across fixtures. The clear performance values support objective planning for cycle times and quality assurance. Compact mounting and rapid fixture integration A 230 mm arm and vertical foot mounting enable installation on upright fixture plates or bench uprights without excessive spatial demands. The design’s massive arm gives a positive mechanical advantage, so clamping is achieved with a simple lever action but substantial retention result. The unit’s moderate mass contributes to stable anchoring while keeping the overall fixture weight low. Integration into modular clamping systems or bespoke jigs is straightforward, making the clamp suitable for both small runs and repetitive assembly tasks. Built for workshop environments and low maintenance Constructed from galvanised steel, the clamp resists workshop humidity and incidental coolant exposure, increasing service life and reducing maintenance intervals. Surfaces treated against corrosion preserve contact geometry and reduce the need for frequent adjustment, which supports uptime in busy production areas. The robust mechanical construction and obvious service points simplify inspection routines and make the device a dependable component in a long‑term tooling strategy, helping maintain process stability over time. Typical applications and practical benefits The lever clamp is designed for tasks such as assembly, bench work, light machining and welding fixtures where a durable, repeatable hold is required. Its performance figures and compact footprint suit production benches, small machining centres and manual workstations. The combination of high retention and simple actuation speeds up setup and part changeover, delivering a measurable improvement in throughput and operator ergonomics without complex handling aids. For procurement or technical clarification regarding the Kukamet 212 vertical clamp, contact Metav Werkzeuge for application guidance and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 212-5-D-C3 SKU: 212-5-D-C3 GTIN: 8680731501797 Material: Galvanised Weight: 1.552 kg Facts Arm length: 230 mm Maximum holding force: 5,000 N Maximum pressing force: 4,500 N Category: Clamps Special features Massive holding arm Vertical foot mounting Galvanised finish Category path: Spanner FAQ What is the maximum holding force of this clamp? The Kukamet 212 vertical clamp provides a maximum holding force of 5,000 N suitable for reliable retention in assembly and light machining tasks. Can the clamp be mounted on upright fixture plates? Yes, the vertical foot mounting of the 212 clamp is designed for installation on upright plates and bench uprights for space‑efficient integration. Is the clamp suitable for use in humid workshop environments? The galvanised steel construction protects the clamp against corrosion, making the 212 suitable for workshop use with reduced maintenance needs. How long is the clamping arm and what does that mean for reach? The arm measures 230 mm, offering extended reach while maintaining a compact overall footprint for fixture layouts. Which applications benefit most from this lever clamp? Typical uses include jigs, assembly benches, welding fixtures and light machining where repeatable, high‑force retention is required; the 212 clamp is optimised for these scenarios. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230N Push Rod Clamp With Spring, Horizontal Foot, Zinc-Plated - Kukamet
Take advantage of a spring-assisted, zinc-plated clamp that combines reliable clamping force and compact design to keep fixtures stable during repetitive tasks; order the part directly via Metav Werkzeuge or consult our specialists for integration advice. 511 Push-rod Clamp by Kukamet — spring-loaded, zinc-plated, horizontal foot The 511 push-rod clamp is a spring-supported clamping device intended for fixture and jig applications, providing consistent workpiece retention when mounted via a horizontal foot. Spring-assisted actuation for reliable clamping Horizontal mounting foot for flush installation Zinc-plated for corrosion resistance Compact design, weight 0.142 kg Consistent clamping performance for repetitive tasks The spring-supported push-rod design delivers a controlled clamping action that is well suited to serial production and repetitive assembly. A maximum clamping force of 230 N and a maximum holding force of 280 N are specified, which ensures that the clamp maintains workpiece position under moderate loads. The difference between clamping and holding force is intentional: the actuation mechanism is spring-biased for repeatable engagement, while the higher holding figure indicates the device’s ability to resist displacement once engaged. This combination reduces the need for constant re-adjustment and supports stable cycle times in jigs and fixtures. Built for durable workshops and simple mounting Constructed with a zinc-plated finish, the unit provides basic corrosion protection for workshop environments where humidity or coolant splash is present. The horizontal foot allows for low-profile installation on plates or fixture bases, enabling clamps to be fitted flush with minimal protrusion. At 0.142 kg, the component is compact and lightweight, easing handling during assembly and reducing additional load on fixture plates. These attributes translate into straightforward integration into existing tooling layouts and predictable service life under normal workshop conditions. Practical value across inspection, assembly and machining jigs This push-rod clamp is suited to applications that demand dependable, repeatable retention without complex actuation systems. Typical uses include manual assembly stations, inspection fixtures and light machining jigs where quick engagement and automatic return are advantageous. The spring-assisted mechanism minimises operator effort during frequent clamping cycles, contributing to improved ergonomics and reduced cycle times. Specifying this clamp in dedicated fixtures supports operational reliability and helps standardise tooling across production cells, creating measurable gains in process consistency. For procurement or application guidance on the Kukamet 511 push-rod clamp, contact Metav Werkzeuge to arrange supply from our Emmerich warehouse and discuss suitability for specific fixtures and processes Technical Data Article number: 511-1-Y GTIN: 8680731506075 Brand: Kukamet Material: Zinc-plated Mounting: Horizontal foot Facts Clamping force max: 230 N Holding force max: 280 N Weight: 0.142 kg SKU: 511-1-Y Special features Spring-supported actuation Compact push-rod design Category: Clamps / Spanners Catalogue: 511-Y-katalogseite.pdf FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 230 N for the 511 push-rod clamp (Kukamet, SKU 511-1-Y), with a holding force specified at 280 N. How is the clamp mounted to a fixture? Mounting is achieved via a horizontal foot; the horizontal foot allows flush attachment to plates and fixture bases for low-profile installation. What corrosion protection does the device offer? The component is zinc-plated, providing basic corrosion resistance suitable for workshop environments. Is the clamp suitable for high-load machining operations? The 511 is intended for light to moderate clamping tasks in fixtures and jigs; its specified forces (230 N clamping, 280 N holding) reflect suitability for assembly and inspection applications rather than heavy-duty machining. Where can the product documentation be found? A catalogue page (511-Y-katalogseite.pdf) is available alongside product images and technical specifications for the 511 clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
233mm Push Rod Clamp Automatic Jaw Adjustment 2,500N - BESSEY
Take advantage of a compact, workshop-ready clamp that combines automatic span adjustment with a reliable 2,500 N maximum clamping force to speed up assembly and secure workpieces consistently; order the BESSEY solution directly via Metav Werkzeuge or ask the consultants for advice. BESSEY bar clamp, size 25 — automatic span adjustment, 2,500 N clamping force BESSEY bar clamp, size 25 for quick-span adjustments in workshop and assembly environments, designed for medium-duty holding tasks Automatic span adjustment 2,500 N maximum clamping force Overall length 233 mm Size 25 for medium-duty tasks Consistent clamping performance for assembly and repair The automatic span adjustment reduces set-up cycles by aligning the jaws to the workpiece instantly, while the specified 2,500 N rating denotes the maximum axial holding capacity under normal working conditions. For practical purposes, 2,500 N corresponds to a firm hold on glued joints, light fabrication and many repair tasks where stable pressure is required. This combination of fast adjustment and defined clamping force supports repeatable results and helps maintain production throughput in small workshops and repair bays. Compact footprint for tight working conditions Designed with an overall length of 233 mm, a width of 60 mm and a height of 46 mm, the clamp is intended for situations where accessibility is limited. The modest dimensions enable secure clamping in confined fixtures and on narrow workpieces without obstructing surrounding tooling. The compact format also simplifies storage and handling in crowded toolkits while retaining sufficient reach for standard medium-duty operations. Faster setup and dependable handling The automatic adjustment mechanism shortens setup time and reduces the number of manual operations needed during repetitive tasks, making the clamp a practical choice for batch work and frequent repositioning. Marked as Size 25, the tool targets medium-duty applications where rapid, reliable holding is more important than very large span capacity. Supplied as a single unit, the clamp integrates smoothly into routine workflows and is suitable for use at workbenches, in maintenance shops and on-site assemblies. Contact Metav Werkzeuge to discuss availability or to request tailored technical advice for integrating the BESSEY bar clamp, size 25, into current workflows. Technical data Article number: 4123716102NW Label: Schubstangenspanner Gr.25 BESSEY Manufacturer: BESSEY Product type: Bar clamp (Schubstangenspanner) Packaging unit: 1 Facts Overall length: 233 mm Width: 60 mm Height: 46 mm Maximum clamping force: 2,500 N Size designation: 25 Special features Automatic span adjustment Medium-duty application SKU / UID: 4123716102NW FAQ What does the automatic span adjustment do? The automatic span adjustment ensures the jaws align with the workpiece quickly, reducing set-up time and enabling consistent clamping pressure with the BESSEY bar clamp, size 25 (SKU 4123716102NW). What level of work is suitable for a 2,500 N clamping force? A maximum clamping force of 2,500 N is suitable for medium-duty workshop tasks such as assembly, gluing and light fabrication where a firm, repeatable hold is required. Can the clamp reach into narrow fixtures? Yes; with an overall length of 233 mm and a compact profile, the clamp is designed to access confined spaces and narrow workpieces typical in repair and maintenance settings. Is the clamp supplied ready for immediate use? The tool is supplied as a single unit (packaging unit 1) and is ready for installation into standard workshop routines for medium-duty clamping tasks. How is the size designation relevant to selection? The Size 25 marking indicates the clamp’s intended application class—appropriate for medium-duty operations where quick adjustment and reliable holding are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2500 N Hold Force 2000 N Pneumatic Horizontal Clamp 95° Angle Zinc-Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution that combines consistent pneumatic actuation with reliable holding performance to keep fixtures accurate and cycle times short. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. 631 Pneumatic Clamp — galvanised, 2,000 N clamping force The 631 is a pneumatic clamp for horizontal mounting, engineered for repeatable workholding in production fixtures and workshop jigs. Robust galvanised steel construction Max. clamping force 2,000 N Holding force up to 2,500 N Horizontal-foot mount, 95° angle Predictable clamping for tighter process control A pneumatic clamp delivers fast, repeatable actuation and the 631 is no exception. The specified 2,000 N clamping force, combined with a 2,500 N holding capacity, provides measurable security for parts during machining or assembly. Consistent force application reduces rework and scrap by avoiding variable manual tightening; the result is an improvement in throughput and a more predictable production flow. The compressed-air operation enables short cycle times and reliable repeatability in automated or semi-automated fixtures. Space-saving design with corrosion protection The unit’s galvanised finish ensures basic corrosion resistance for industrial environments where humidity or occasional coolant exposure is present. With a compact mass of 1.1 kg and a horizontal foot mounting arrangement, the clamp integrates into confined fixtures without adding unnecessary bulk. The 95° actuation angle helps position the clamping arm clear of the workpiece when released, simplifying loading and unloading. These design choices make the clamp suitable for tightly packed jigs where both footprint and corrosion resistance matter. Robust construction for workshop and production use Built for continuous use in repetitive operations, the clamp combines a durable surface treatment with sturdy mechanics for extended service life. The pneumatic actuation removes the variability of manual clamping, supporting quality assurance in batch production and short-cycle assembly. The product is identified as SKU 631-3 and pairs readily with standard pneumatic systems; integration is straightforward for engineers specifying fixture hardware. For buyers seeking dependable, low-maintenance clamping, this option supports streamlined assembly and machining processes. For reliable, repeatable clamping choose the Kukamet 631 via Metav Werkzeuge — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 631-3 GTIN: 8680731503012 Facts Clamping force: 2,000 N Holding force: 2,500 N Weight: 1.1 kg Actuation angle: 95° ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Category: pneumatic clamp Brand: Kukamet FAQ What maximum clamping force does this clamp provide? The Kukamet 631 pneumatic clamp provides a clamping force of 2,000 N and a holding capacity of 2,500 N for secure part fixation. How is the clamp mounted in a fixture? The clamp uses a horizontal foot mounting configuration, enabling low‑profile installation in jigs and fixtures. Is the surface treated against corrosion? The unit is galvanised, offering basic corrosion protection suitable for many workshop and production environments. What is the actuation angle of the clamping arm? The clamp operates with a 95° actuation angle, allowing the arm to clear the workpiece when released. Which SKU identifies this product? This item is supplied as SKU 631-3 and is intended for use in pneumatic clamping installations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Hold Force Vertical Clamp 2000 N Closing Force Stainless Steel - Kukamet
Take advantage of a compact, stainless steel design with up to 2,000 N clamping capacity and a high holding force for dependable fixturing; order the Vertikalspanner 212 directly via Metav Werkzeuge or consult our advisors for application support. Vertikalspanner 212 – Vertical clamp with M8x50 pressure spindle, stainless steel (Kukamet) The Vertikalspanner 212 is a compact vertical clamp designed for secure workpiece holding in milling and general workshop fixturing. Compact stainless-steel design Clamping force up to 2,000 N Holding force up to 2,500 N Faster, safer clamping for small-scale production The lightweight vertical clamping solution combines a robust stainless steel construction with a defined clamping force of 2,000 N, offering consistent grip during machining and handling. The specified clamping value refers to the axial force applied by the pressure spindle; this ensures predictable part stability under load. For production environments where repeatability matters, the reliable clamping parameter reduces set-up time and rejects due to slippage, improving process efficiency and throughput. Simple integration and quick set-up on fixtures Designed for vertical-base mounting, the device features an M8x50 pressure spindle that permits fine actuation and easy adjustment when securing a workpiece. The vertical base attachment enables installation on standard fixture plates and modular tooling systems without complex modifications. At approximately 0.415 kg, the clamp is light enough for reconfiguration yet rigid enough for precision tasks, making it suitable for machine tables, jigs and small batch fixtures where flexibility and uptime are priorities. Low maintenance and corrosion resistance for long service life Made from stainless steel, the clamp resists corrosion in humid or coolant-exposed environments, which reduces maintenance intervals and replacement cycles. The distinction between clamping force and holding force is important here: while the clamping force is the adjustable active pressure, the higher holding force indicates the maximum retained load under shear or pull conditions. This combination delivers operational confidence and lowers the risk of unexpected downtime, supporting a steady production flow and protecting operator investment in tooling. Choose the Kukamet Vertikalspanner 212 for dependable 2,000 N performance — contact Metav Werkzeuge for procurement and technical advice from Emmerich’s quality filter. Technical data SKU: S212-3 GTIN: 8680731509229 Material: stainless steel Weight: 0.415 kg Manufacturer: Kukamet Numbers Maximum clamping force: 2,000 N Maximum holding force: 2,500 N Pressure spindle: M8x50 ECLASS: 21041717 ETIM: EC011973 Special features Vertical base mounting Compact vertical clamp design Suitable for workshop and milling fixturing FAQ What is the maximum clamping force of this clamp? The Vertikalspanner 212 provides a maximum clamping force of 2,000 N, quoted as the axial pressure applied by the M8x50 spindle. Can the clamp withstand lateral loads while holding a workpiece? Yes; the specified holding force for the Vertikalspanner 212 is 2,500 N, indicating the maximum retained load under shear or pull conditions. Is the material suitable for use with coolants and humid environments? Constructed from stainless steel, the clamp is corrosion-resistant and well suited to coolant-exposed machining and workshop environments. How is the clamp mounted to a fixture plate? The unit uses a vertical base mounting arrangement, enabling secure attachment to standard fixture plates and modular tooling systems. What dimensions are relevant for integration in a jig or fixture? Key values for integration are the M8x50 pressure spindle, the compact form factor and the weight of 0.415 kg, which together inform clearance and load considerations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Hold Force Vertical Clamp 2000 N Thrust, M8x50 Thread, Angle Base - Kukamet
Take advantage of the combination of compact design, robust holding capacity and flexible mounting for reliable clamping in fixtures; order the product directly via Metav Werkzeuge or consult the specialists for application advice. Kukamet Vertikalspanner 213 — vertical clamp with M8x50 pressure spindle and angle-foot mounting The Kukamet Vertikalspanner 213 is a compact vertical clamp designed for secure, repeatable holding in jigs and fixture systems across light industrial and workshop environments Compact vertical clamp design Angle-foot mounting for flexible fixing M8x50 pressure spindle Holding force up to 2,500 N Consistent, repeatable clamping to speed production The clamp delivers repeatable holding through a simple, direct-action mechanism that reduces setup variation. With a clamping force of 2,000 N and a static holding capacity of 2,500 N, the unit provides a quantifiable foundation for routine machining and assembly tasks where stability matters. The clear numerical performance indicators allow process planners to integrate the clamp into existing fixtures with predictable results, reducing rework and downtime while supporting lean production practices. Space-saving mounting that adapts to many fixtures Thanks to the angle foot mounting, the device can be secured in constrained spaces and oriented for optimal access to the workpiece. The low mass of 0.47 kg and the compact footprint make the clamp suited to both manual jigs and automated stations where minimising bulk is important. The mounting type supports straightforward alignment and ensures the clamp sits solidly under load, making it an effective choice for small-batch production and maintenance work where flexibility is required. Durable finish and straightforward maintenance for workshop use Finished in a blackened finish that resists surface corrosion, the clamp is shaped for daily use in workshop conditions. The M8x50 pressure spindle is a standard, serviceable size that simplifies replacement and reduces spare-part complexity. Material and finish choices are engineered for robustness rather than cosmetic appeal, delivering a component that holds up across repetitive cycles and requires only routine inspection rather than specialised servicing. Contact Metav Werkzeuge for tailored mounting advice or to arrange supply directly from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B213-3 GTIN: 8680731507980 eClass: 21041717 ETIM: EC011973 Facts Weight: 0.47 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Special features Designation: Vertikalspanner 213 Mounting: Angle foot Pressure spindle: M8x50 Finish: Blackened finish FAQ How much clamping force does the vertical clamp provide? The Kukamet Vertikalspanner 213 offers a clamping force of up to 2,000 N with a holding capacity reaching 2,500 N, suitable for many light industrial applications. Is the spindle size standard for easy replacement? Yes, the M8x50 pressure spindle is a common size and can be replaced without special tools when used in the Vertikalspanner 213. Can the clamp be mounted in tight fixture arrangements? The angle-foot mounting allows the clamp to be secured in confined spaces and on angled surfaces, making it adaptable to compact fixtures. What finish does the clamp have and how does that affect durability? The unit has a blackened finish that offers surface protection against corrosion and is intended for routine workshop environments. Does the clamp suit both manual and automated jigs? The compact design and quantified holding figures make this vertical clamp appropriate for manual jigs and for integration into small automated stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com