Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
2000N Vertical Clamp With Safety Lock, M8x50 Spindle, 2500N Holding Force, Blackened - Kukamet
Take advantage of the combination of compact design, reliable holding force and an integrated safety lock to keep fixtures steady during machining. The robust clamping performance and simple vertical-foot mounting support efficient set-up and lower rework rates. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for tailored advice. Vertical clamp 212 — vertical base with safety lock, Kukamet Vertical clamp 212 is a compact clamp for secure vertical mounting and consistent clamping in workshop jigs and fixtures Safety lock for secure clamping Vertical foot for sturdy mounting 2,000 N clamping force Blackened finish for corrosion resistance Reliable clamping that keeps production moving The Vertical clamp 212 combines a high clamping capacity with a compact footprint to support repeatable fixturing. With a rated clamping force of 2,000 N and a holding force of 2,500 N, the device reduces movement under load and minimises rework. The integrated safety lock prevents unintentional release during handling, translating into fewer interruptions on the shop floor and improved throughput. Technical terms explained: clamping force refers to the axial force applied to secure a workpiece; holding force is the maximum retention under shear or side loads. Fast mounting and predictable alignment for efficient setup A vertical base design enables direct attachment to machine tables or fixture plates, shortening preparation time and improving repeatability. The clamp is fitted with an M8x50 spindle, which permits simple adjustment and fine control of clamping distance without specialised tools. The low mass (0.415 kg) and compact form factor make repositioning straightforward while maintaining stability. These attributes reduce setup time per operation, supporting lean workflows and faster changeovers in production environments. Durable finish and workshop-grade safety features Constructed with a blackened finish, the clamp offers enhanced surface protection against corrosion and everyday wear. The safety lock mechanism adds an operational safeguard for handling and intermittent operations where accidental release would be critical. Material choice and finishing extend service life and preserve performance, helping workshops avoid frequent replacements. Combined with the unit’s measurable forces and standardised spindle, this makes the clamp a dependable component for jigs, fixtures and general workshop clamping tasks. For reliable clamping solutions from Kukamet, contact Metav Werkzeuge to discuss suitability for specific fixtures or to request technical data tailored to individual applications. Technical data SKU: B212-3-L GTIN: 8680731507898 Manufacturer: Kukamet Material/finish: blackened Attachment: vertical foot Safety lock: yes Numbers Clamping force (max): 2,000 N Holding force (max): 2,500 N Weight: 0.415 kg Spindle: M8x50 eClass: 21041717 ETIM: EC011973 Special features Safety lock for secure operation Vertical base for direct mounting Blackened surface for corrosion resistance Compact, lightweight design Category: spanner FAQ How much clamping force does the clamp provide? The clamp delivers a maximum clamping force of 2,000 N and a holding force of 2,500 N, suitable for many general fixturing tasks with the Vertical clamp 212 (SKU B212-3-L). Can the clamp be mounted directly to a fixture plate? Yes; the vertical foot design allows direct mounting to machine tables and fixture plates for stable, low-profile installation. What spindle specification is used for adjustment? Adjustment is via an M8x50 spindle, providing fine control of clamping travel and straightforward replacement with standard hardware. Is the clamp suitable for wet or corrosive workshop environments? The blackened finish improves surface resistance to corrosion and daily wear, enhancing durability in standard workshop conditions. Does the clamp include a safety mechanism? The clamp is equipped with a safety lock to prevent unintended release during handling and intermittent operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Safety Lock, Stainless Steel, Horizontal Foot - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines stainless steel durability with a proven safety lock to secure workpieces reliably; order the unit directly via Metav Werkzeuge or consult their specialists for fixture compatibility. Kukamet Vertical Clamp 211 — stainless steel, safety lock Kukamet Vertical Clamp 211 is a vertical clamping device designed for stable, repeatable workholding in jigs and fixtures across light to medium industrial applications. Stainless steel construction for durability Safety lock for secure, vibration-resistant hold 2,500 N maximum holding force Horizontal-foot mounting for easy fixture integration Built for consistent, measurable production performance The vertical clamping solution is engineered to deliver precise, repeatable retention where process stability matters. With a holding force of 2,500 N and a clamping force of 2,000 N, the device ensures components remain immobile under machining or assembly loads, reducing rework and scrap. The M8x50 pressure spindle provides an adjustable contact point, allowing fine control of clamping pressure; this threaded spindle format is an industry-standard choice for toolroom and fixture setups, enabling maintenance and spindle replacement without special tools. The measurable force values contribute directly to production reliability and predictable cycle outcomes. Quick integration into existing fixtures and tooling Designed with a horizontal foot attachment, the clamp installs easily on standard plates and t-slots, shortening setup time and simplifying retrofits. The compact, low-profile body and low weight support space-efficient layouts and allow several units to be mounted closely for multi-point retention. The clamp’s lever-style action facilitates fast part loading and unclamping, improving throughput on repetitive tasks. Where throughput is a priority, the mechanical simplicity of the design translates into fewer failure modes and easier routine checks, supporting uninterrupted operation. Corrosion resistance and operational safety for everyday use Constructed from stainless steel, the clamp resists corrosion in workshop environments and requires minimal surface care, supporting long service life and consistent contact geometry. The integrated safety lock prevents accidental release under vibration or when subject to incidental impacts, enhancing operator confidence during handling and machine cycles. For applications that demand both durability and secure retention—such as light machining, assembly or inspection fixturing—this vertical clamping device provides a balanced combination of robustness and user-safe operation. For tailored advice on integrating the Kukamet Vertical Clamp 211 into specific fixtures or to confirm compatibility with existing tooling, contact Metav Werkzeuge in Emmerich — their specialists will help assess suitability and next steps Technical data SKU: S211-3-L GTIN: 8680731509137 Brand: Kukamet Model: 211 Facts Maximum holding force: 2,500 N Maximum clamping (pressure) force: 2,000 N Weight: 0.415 kg Pressure spindle: M8x50 Special features Material: stainless steel Mounting type: horizontal foot Safety lock included Lever clamp style for fast actuation FAQ What forces can the clamp withstand? The Kukamet Vertical Clamp 211 delivers a maximum holding force of 2,500 N and a clamping force of up to 2,000 N (SKU S211-3-L), suitable for light to medium duty fixtures. Is the clamp suitable for corrosive workshop environments? Yes, the clamp is made from stainless steel, which offers corrosion resistance and reduces the need for frequent surface maintenance. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot designed for attachment to standard plates or t-slot fixtures, enabling straightforward integration into existing setups. Can the pressure spindle be adjusted or replaced? The pressure spindle is specified as M8x50, a common threaded spindle size that allows adjustable clamping and straightforward replacement if required. Does the clamp include any safety features to prevent accidental release? The unit features an integrated safety lock, which secures the clamp in the closed position and reduces the risk of accidental opening under vibration or impact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp, 2500N Holding Force, Zinc Plated, Vertical Foot Mount - Kukamet
The compact galvanised design delivers dependable clamping with a high holding force and a robust pressing capacity, ensuring secure fixture clamping in light industrial and workshop environments. Order directly via Metav Werkzeuge or consult the technical team for suitability and rapid supply. Vertical clamp 212 by Kukamet — galvanised, 2.5 kN holding force The Vertical clamp 212 is a compact galvanised vertical-foot clamp designed for secure workpiece holding in bench fixtures and light industrial jigs. Galvanised finish for corrosion resistance 2.5 kN maximum holding force Vertical-foot mounting for bench fixtures Compact design, only 0.415 kg Secure, measurable clamping for repeatable setups The clamp provides a 2,500 N maximum holding force and a 2,000 N pressing force, values that translate into reliably fixed workpieces under machining and assembly loads. Stating forces in newtons gives a clear, comparable performance measure for fixture designers and production planners; higher nominal force reduces slippage risk and improves process repeatability. The mechanical spindle actuation allows predictable load application, supporting quality control routines and reducing cycle variation in repetitive tasks. Built for workshop environments with galvanised protection A galvanised finish protects the body against workshop humidity, coolant mist and general wear, extending service life without frequent refurbishment. The unit’s compact footprint and low mass (approx. 0.415 kg) make it suitable for dense fixture layouts and portable clamping stations where weight and space matter. Lightweight construction also simplifies handling during fixture assembly and transport while the corrosion-resistant surface keeps contact faces intact for consistent performance over time. Straightforward mounting and standard spindle for easy integration Equipped with a vertical-foot mounting arrangement, the clamp integrates directly into bench plates and base plates with vertical support. The spindle specification M8x50 provides a familiar standard thread for replacement or adjustment, and the design omits an external arm (not applicable) to keep the contact area compact. This configuration suits modular tooling systems and makes retrofitting into existing jigs quick, with minimal profile change to the work envelope and straightforward mechanical attachment. Practical supply and trusted partnership for production continuity Available through Metav’s distribution, the clamp benefits from a supplier network focused on consistent availability and industry-grade selection. Metav’s offering aims to make precision accessible across workshops and trade customers, combining a broad product range with a transparent logistics approach from Emmerich. For procurement and line-planning, the combination of measurable clamping values and durable finishing supports dependable integration into production fixtures and maintenance regimes. For additional technical clarification, the Metav team can be contacted by email or phone for specification matching and series planning. For reliable workshop clamping, request the Kukamet Vertical clamp 212 from Metav Werkzeuge for fast supply and expert advice from Emmerich, ensuring the correct fixture configuration for the intended application Technical data Article number: 212-3 GTIN: 8680731501582 Manufacturer: Kukamet Facts Weight: 0.415 kg Maximum holding force: 2,500 N Maximum pressing force: 2,000 N Spindle thread: M8x50 Mounting type: vertical foot Material: galvanised Special features Galvanised finish Compact, lightweight design Arm: not applicable Category: Spanner FAQ Is the clamp suitable for long-term use in humid workshop conditions? The galvanised finish on the Vertical clamp 212 provides corrosion resistance suitable for humid workshop conditions, helping to maintain clamping reliability over time. What mounting arrangement is required for installation? The unit uses a vertical-foot mounting suitable for bench plates and base plates; the M8x50 spindle is compatible with standard fixture attachment practices. Can the clamp deliver consistent clamping force for repetitive operations? Yes, the specified 2,500 N holding force and 2,000 N pressing force are defined to enable consistent clamping performance across repetitive cycles when installed correctly. Is an arm supplied with the clamp for offset clamping? No; the design denotes the arm as not applicable, so the clamp is intended for direct vertical clamping without an external lever arm. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Toggle Clamp 2500N Holding Force, Zinc Plated Angle Base - Kukamet
Take advantage of a compact, galvanised vertical clamp offering 2,000 N clamping force and a high holding capacity of 2,500 N; robust performance and an angle‑foot mounting support reliable fixture integration — order the unit directly via Metav Werkzeuge or consult the advisors for application guidance. Vertical clamp 213 — Kukamet, 2,000 N clamping force, galvanised The Vertical clamp 213 is a compact toggle clamp designed for secure vertical workholding in jigs and fixtures across light to medium industrial applications. Vertical clamping force 2,000 N Holding force up to 2,500 N Galvanised for corrosion resistance Angle‑foot mounting for easy fixing Consistent clamping for reliable throughput The 213 delivers a defined clamping force of 2,000 N and a maximum holding force of 2,500 N, which translates into reproducible workholding and fewer process interruptions. Consistency in clamp force reduces rework and inspection effort in serial production, supporting a smoother machining or assembly cycle. Measurements and forces are stated as technical parameters to allow straightforward integration into process planning. Durable finish and precise contact elements A galvanised surface provides basic corrosion protection for workshop environments while keeping maintenance requirements low. The pressure spindle is specified as M8 x 50, enabling standardised replacement parts and predictable contact geometry. With a mass of 0.47 kg, the unit combines low weight with mechanical robustness, making it suitable for mobile fixtures and quick-change jigs where balance and handling matter. Space‑efficient mounting that simplifies assembly The angle base fixing offers straightforward attachment to plates and fixture frames without complex adapters. The compact footprint of the clamp minimises interference with surrounding tooling and allows close‑packed arrangements on fixture plates. Where machine access is limited, the slim profile supports easier positioning and repeatable alignment during set‑up. Designed for repeatability and low upkeep This toggle‑style clamp is intended for repeated engagement in production and assembly tasks, offering secure vertical workholding with minimal adjustment. Routine inspection focuses on the spindle and fastening points; no specialised servicing is required beyond standard workshop care. The simple design and galvanised finish make it a pragmatic choice for economic fixtures and small series production. Contact Metav Werkzeuge for availability and technical comparison of the Kukamet vertical clamp 213; Metav’s specialists in Emmerich provide application advice and secure delivery — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 213-3 GTIN: 8680731501940 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Core specifications Clamping force (max): 2,000 N Holding force (max): 2,500 N Pressure spindle: M8 x 50 Weight: 0.47 kg Design and features Mounting: angle base Material: galvanised steel Special feature: none Designation: Vertical clamp 213 FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 2,000 N; the specified holding capacity is 2,500 N, as listed for the Kukamet vertical clamp 213. How is the clamp mounted to a fixture? Mounting is realised via an angle base, allowing direct attachment to fixture plates or frames without special adapters for the 213. Is the surface treated against corrosion? Yes, the unit is galvanised, offering basic corrosion resistance suitable for standard workshop environments. What are the key replacement or wear parts? The pressure spindle specified as M8 x 50 is the primary contact element; routine checks of the spindle and fastening points ensure continued performance of the vertical toggle clamp 213. Is the clamp suitable for compact assemblies and mobile fixtures? With a weight of 0.47 kg and a compact footprint, the clamp is designed for easy handling and integration into tight fixture arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Clamping Arm Clamp Swivel Height Adjustable 28x11mm Rail Section - BESSEY
Take advantage of a robust clamping solution that combines a 200 mm clamping height with an adjustable outreach of 123–140 mm for stable, repeatable setups; order the BESSEY gripping-arm clamp directly via Metav Werkzeuge or consult our specialists for application advice. BESSEY gripping-arm clamp — clamping height 200 mm, adjustable outreach BESSEY gripping-arm clamp for flexible clamping on compatible rails, suitable for assembly and workshop fixtures Clamping height 200 mm Adjustable outreach 123–140 mm Rail cross-section 28 x 11 mm Swivelling and height-adjustable design Stable clamping for repeatable production steps The clamping height of 200 mm and the adjustable outreach of 123–140 mm deliver a reliable working envelope for a wide range of fixtures. This configuration produces a consistent clamping force across the stroke, which helps to reduce rework and downtime during repetitive tasks. The precise height range supports accurate alignment of parts at different stages of preparation or assembly, while the adjustable reach permits positioning of the clamping arm without compromising accessibility. Such predictability in process performance is particularly valuable when short setup times and high repeatability are required. Adaptable mounting and ergonomic operation Compatibility with a rail cross-section of 28 x 11 mm ensures straightforward integration into standard profile systems and modular workstations. The swivelling function combined with height-adjustable capability allows the clamping arm to be oriented and set to the optimal working position, improving operator ergonomics and part access. The design reduces the need for awkward handling and supports faster cycle times, since the arm can be repositioned quickly without tools. For workshops that change fixtures frequently, this flexibility minimises fixture rework and increases throughput. Efficient handling that supports shop-floor safety Fast, secure engagement is integral to the clamp’s concept: the gripping-arm design secures components with predictable clamping geometry, enabling safe machining or assembly operations. The ability to set the outreach and height precisely contributes to a repeatable set-up, reducing the likelihood of slippage or misalignment during processing. Reduced handling and clearer part orientation also lower the chance of incidental contact, supporting safer routines at the bench or on jigs. Overall, the device focuses on operational efficiency while maintaining a conservative approach to workplace safety. Proven brand quality delivered with Metav reliability Sourced from BESSEY, the product benefits from a reputation for practical clamping solutions; when supplied by Metav Werkzeuge it comes with the assurance of a vetted European distribution point. Metav’s Emmerich location acts as a quality filter for customers across industry and trade, and the company’s experience—reflected in a large customer base and a broad catalogue—supports reliable supply and expert consultation. For procurement teams seeking to reduce supplier complexity, the combination of a recognised clamp manufacturer and Metav’s distribution network simplifies logistics and supports long-term availability. Contact Metav Werkzeuge to specify the right BESSEY gripping-arm clamp for the application and arrange supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss requirements and delivery options Technical Data Article number: 4123745010NW Label: Greifarmspanner Spann-H.200mm A.123 -140mm Schienenquerschnitt 28x11mm BESSEY Brand: BESSEY Product type: gripping-arm clamp Packaging unit: 1 Facts Clamping height: 200 mm Outreach: 123–140 mm Rail cross-section: 28 x 11 mm Special features Swivelling function Height-adjustable design Adjustable outreach FAQ Is the clamp compatible with standard 28 x 11 mm rails? Yes. The clamp is designed for mounting on rails with a 28 x 11 mm cross-section, which enables secure attachment and straightforward integration into modular fixtures with that profile. What clamping height does the BESSEY gripping-arm clamp provide? The BESSEY gripping-arm clamp offers a clamping height of 200 mm, suitable for a variety of assembly and workshop tasks that require higher clearance. Can the outreach be adjusted while the clamp is in position? The outreach is adjustable across the 123–140 mm range and the unit’s swivelling and height-adjustable features allow repositioning to suit the workpiece without extensive disassembly. For which workshop applications is this clamp particularly suitable? The clamp is well suited to fixture assembly, jigs, and repetitive holding tasks where predictable positioning and quick reconfiguration are priorities, especially when integrated into 28 x 11 mm rail systems. How does the clamp support repeatable setups? By combining a fixed 200 mm clamping height with an adjustable outreach and a swivelling, height-adjustable mount, the clamp enables repeatable part orientation and consistent clamping geometry across production cycles. Manufacturer: BESSEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Closure Clamp With Extended Special Arm, 20kN Push / 25kN Hold Zinc-Plated, Vertical Foot - Kukamet
Take advantage of the combination of galvanised construction, an extended 200 mm special arm and a maximum 25 kN holding force for reliable fixture clamping in production environments. Order the clamp directly via Metav Werkzeuge or contact our consultants for technical advice. Verschlussspanner 333 — Vertical-foot lever clamp with 200 mm extended arm (Kukamet) The Verschlussspanner 333 is a vertical-foot lever clamp engineered for secure, high-force clamping in jigs, fixtures and assembly operations. Galvanised steel construction for durability 200 mm extended special arm for increased reach Vertical-foot mounting for robust fixture integration 25 kN maximum holding force for reliable retention Consistent high-force performance for secure fixtures The primary benefit of this lever clamp is its high mechanical output: a maximum clamping force of 20,000 N and a holding force of 25,000 N. These values translate into secure retention for parts during welding, assembly or inspection, reducing rework and increasing throughput. The mechanical design converts operator input into predictable clamping pressure, which is crucial where repeatability is required. The solid force figures are especially relevant for industrial workshops and small-batch production where consistent part positioning prevents rejects and saves operating time. Durable, corrosion-resistant design with extended reach Constructed from galvanised steel, the clamp resists corrosion in workshop environments and maintains surface integrity under frequent use. The extended 200 mm special arm provides additional reach and clearance, making it easier to clamp larger or awkwardly positioned parts without compromising accessibility. At a weight of 1.45 kg, the component balances robustness with manageable mass for mounting in benches or fixtures. The galvanised finish also simplifies maintenance by reducing the need for immediate refinishing in damp or exposed conditions. Flexible mounting and practical application in production Designed for vertical-foot mounting, the clamp integrates into tooling plates and fixture bases with straightforward fastening. The 200 mm thread length offers flexibility for fine adjustment and secure anchoring through a range of plate thicknesses, while the integrated hook increases functionality for certain closure applications. Typical uses include jigs for machining, assembly stations and holding points in measuring fixtures. The clamp’s standardised interface supports quick replacement within existing setups, supporting lean maintenance practices and minimising downtime. For robust, corrosion-resistant clamping from Kukamet, contact Metav Werkzeuge for product availability and application guidance — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the Verschlussspanner 333 and its suitability for specific fixtures Technical data Article number: 333-5-L-M16 GTIN/EAN: 8680731500219 SKU: 333-5-L-M16 Facts Weight: 1.45 kg Arm length: 200 mm Thread length: 200 mm Maximum clamping force: 20,000 N Maximum holding force: 25,000 N Special features Material: galvanised steel Mounting: vertical foot With hook Extended special arm Category: Spanner eClass: 21041718 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Verschlussspanner 333 delivers a maximum clamping force of 20,000 N and a maximum holding force of 25,000 N, giving predictable retention for industrial fixtures. Is the clamp suitable for use in humid or workshop environments? Yes. The galvanised steel construction of the Kukamet Verschlussspanner 333 provides corrosion resistance appropriate for typical workshop and production conditions. How is the clamp mounted and adjusted in a fixture? Mounting is via a vertical foot arrangement; the clamp features a 200 mm thread length for secure anchoring and fine adjustment in tooling plates. Which industries or tasks is this lever clamp suited to? The clamp is intended for jig and fixture applications in assembly, machining, welding and inspection where a robust, repeatable closure is required. What is the ordering code for this model? Order as SKU 333-5-L-M16; GTIN/EAN 8680731500219 identifies this specific version. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Closure Clamp With Vertical Base, Extended Arm, 10000N Thrust, Zinc-Plated - Kukamet
Take advantage of a galvanised finish, a 200 mm extended special arm and high clamping/holding forces for reliable, repeatable fixture work. Order the clamp directly via Metav Werkzeuge or consult the Metav team for technical advice and fast delivery. Toggle clamp 333 – Vertical‑foot locking clamp with 200 mm extended arm (Kukamet) A Toggle clamp 333 is a vertical‑foot locking clamp engineered for secure holding in industrial fixtures and jigs, combining a galvanised finish with an integrated hook for rapid fastening. Galvanised steel for corrosion resistance 200 mm extended special arm Vertical foot for secure mounting 10,000 N clamping, 12,000 N holding force Durable construction that reduces downtime The clamp is built from galvanised steel and designed for heavy workshop use, offering corrosion resistance where repeated cycles and mixed environments are encountered. At approximately 0.95 kg, the unit stays compact without compromising stability, so it integrates easily into fixtures and portable jigs. The galvanised surface reduces maintenance intervals and protects moving parts from premature wear, which helps to keep production lines running with fewer interruptions. High clamping and holding forces for secure processes With a maximum clamping force of 10,000 N and a holding capacity of 12,000 N, this locking device delivers the retention needed for demanding assembly and machining operations. The 200 mm thread length allows for reliable adjustment and precise positioning of the clamping arm, ensuring consistent pressure across repeated cycles. These measurable values translate into improved process reliability and lower reject rates when parts must remain immobile under cutting, welding or assembly loads. Quick integration and ergonomic fixture design The vertical‑foot mounting ensures firm attachment to workbenches or fixture plates while the 200 mm extended special arm provides the clearance necessary for larger or awkwardly shaped workpieces. An integrated hook supports rapid engagement and simple part handling, speeding up changeovers. The compact footprint and straightforward mounting concept make this clamp suitable for bespoke jigs, modular fixtures and production lines where space and cycle time are critical. The product is supplied under SKU 333-4-L-M10 and fits standard workshop mounting patterns. For robust clamping performance and rapid supply of the Kukamet 333 toggle clamp, contact Metav Werkzeuge in Emmerich for stock information and expert technical guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 333-4-L-M10 GTIN: 8682843520987 ECLASS: 21041718 ETIM: EC011973 Core specifications Clamping force max: 10,000 N Holding force max: 12,000 N Arm length: 200 mm Thread length: 200 mm Weight: 0.95 kg Special features Material: Galvanised Mounting: Vertical foot With hook: Yes Special arm: Extended special arm Category: Spanner FAQ How much clamping power does the clamp provide? The Kukamet 333 toggle clamp provides a clamping force of 10,000 N and a holding force of 12,000 N, giving strong retention for industrial fixturing tasks. What mounting arrangement does this clamp use? The clamp is designed with a vertical foot mounting that allows secure fastening to bench tops and fixture plates while keeping the clamp stable under load. Is the finish suitable for humid or mixed environments? Yes, the galvanised surface offers corrosion resistance suitable for workshops where moisture or variable conditions are present. What advantages does the extended arm bring? The 200 mm extended special arm increases reach and clearance, simplifying clamping of larger or irregular workpieces and improving accessibility during setup. Which model reference should be used when ordering or specifying? Refer to Kukamet model 333 or SKU 333-4-L-M10 when ordering or specifying the clamp for fixtures and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Horizontal Clamp 90° Three-Point Massive Holding Arm Safety Lock, 3.5kN Clamp Force - Kukamet
Robust clamping with a massive support arm, 200 mm reach and a secure safety latch ensures reliable fixture performance; combined with a clamping capacity of 3,500 N and a holding force of 3,650 N, this configuration supports repeatable setups and efficient production. Order the 111 horizontal lever clamp directly via Metav Werkzeuge or consult their specialists for application advice. 111 Horizontal lever clamp by Kukamet — 200 mm arm, safety latch 111 is a horizontal lever clamp engineered for secure 90° fixture clamping in jigs and workholding applications, combining a compact footprint with a heavy-duty support arm and mechanical safety lock Massive support arm with safety latch 200 mm arm for extended reach Horizontal base for secure fixture mounting Holding force up to 3,650 N Durable hold for repetitive production tasks The clamp delivers a consistent holding force that suits repetitive clamping cycles in assembly and machining jigs. The combination of a sturdy support arm and a mechanical safety latch reduces the risk of accidental release, translating into reliable repeatability on production lines and in fixture construction. The robust construction and compact geometry permit installation where space is limited while maintaining the force levels required for secure workholding. Practical mounting and material finish for workshop use Designed with a horizontal base for straightforward mounting, the device integrates easily into existing fixture plates and tooling frames. The blackened finish offers basic corrosion resistance and a low-reflective surface that is advantageous in machining environments. The compact mass of the unit and the 200 mm reach balance rigidity and accessibility, enabling secure clamping without excessive bulk on the workbench or fixture assembly. Safety and mechanical advantages for process stability A positive mechanical safety latch prevents unintended opening during vibration or incidental contact, improving operational safety and reducing downtime from repositioning. The lever-style actuation yields fast engagement and visible locked status, supporting efficient setup changes and minimising the time spent on manual securing. These features contribute to a stable production flow and reduced cycle variability in repetitive tasks. Specified performance for accurate expectations With measured values for clamping and holding force, the clamp provides objective data to match application requirements. The clear specification of 3,500 N clamping force and 3,650 N holding force allows planners and engineers to verify suitability for specific workpieces and processes. The 90° clamping angle and the 200 mm arm length offer defined geometric parameters for fixture design and CAD integration. For secure and reliable fixture clamping with Kukamet’s robust 200 mm arm and safety latch, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical data Article number: B111-4-D-L-C3 Manufacturer: Kukamet Category: Clamp Facts Arm length: 200 mm Weight: 0.73 kg Max clamping force: 3,500 N Max holding force: 3,650 N Angle: 90° Special features Fastening: horizontal base Finish: blackened Massive support arm Safety latch SKU: B111-4-D-L-C3 FAQ What clamping and holding forces does the clamp provide? The Kukamet 111 horizontal lever clamp specifies a clamping force of 3,500 N and a holding force of 3,650 N, values intended for secure fixture retention in repetitive operations. How is the clamp mounted in a fixture? Mounting is by a horizontal base, allowing the clamp to be bolted to fixture plates or tooling frames for stable integration into jigs and assemblies. Is the arm length suitable for larger workpieces? The 200 mm arm gives extended reach for many fixture layouts while keeping the overall footprint compact; the lever design supports rapid engagement and release. Which safety features prevent accidental release? A dedicated safety latch secures the lever in the closed position, reducing the risk of unintended opening under vibration or incidental impact. What surface finish does the clamp have? The component is supplied with a blackened finish, providing basic corrosion resistance and a non-reflective surface suited to workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Horizontal Clamp With Massive Holding Arm, 90° Pivot, 3.65kN Holding Force - Kukamet
Take advantage of the combination of robust clamping force, a 200 mm heavy-duty arm and a compact, low-weight design for reliable fixture performance. Order the horizontal toggle clamp directly via Metav Werkzeuge or contact our consultants for integration advice. Horizontal toggle clamp 111 — 200 mm arm, 3.65 kN holding force (Kukamet) The horizontal toggle clamp 111 secures workpieces at a 90° clamp angle for jigs, fixtures and assembly applications where quick, repeatable clamping is required. Massive 200 mm holding arm Holding force 3.65 kN Horizontal foot for plate mounting Blackened finish for corrosion resistance Secure clamping with measurable performance The 111 is engineered as a toggle clamp that converts lever movement into consistent clamping pressure, delivering a holding force of 3.65 kN and a closing force of 3.50 kN. This distinction means the device provides persistent retention once engaged while the actuation requires lower input force, improving operator ergonomics and reducing cycle time. The 200 mm arm offers extended reach for deeper fixtures, enabling stable contact on larger components without compromising repeatability. The compact weight of 0.847 kg keeps the fixture assembly light while retaining industrial robustness. Easy mounting and fixture integration Designed with a horizontal foot, the clamp mounts flush to fixture plates or baseboards for straightforward integration into production jigs. The 90° toggle position gives a clear, fixed clamping orientation that simplifies locating and aligning workpieces, reducing setup time. The horizontal configuration is especially suitable for assembly benches and welding fixtures where lateral access is preferable. The clamp’s form factor supports modular layouts and allows the clamping point to be positioned precisely, translating directly into improved process reliability. Durable finish and low maintenance for long service life A blackened finish protects the mechanism against mild corrosion and wears well in workshop environments, while the massive holding arm is designed to resist bending under repeated load. The toggle mechanism is simple by design, minimising failure points and easing routine inspections; lubrication intervals are extended thanks to the robust construction. Because the clamp is mechanically straightforward, spare parts and replacements can be managed economically, supporting continuous operation and lowering total cost of ownership. Contact Metav Werkzeuge to discuss how the Kukamet horizontal toggle clamp 111 fits specific fixtures and to secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B111-4-D-C3 GTIN: 8680731507058 Manufacturer: Kukamet Model: 111 Facts Arm length: 200 mm Clamping force (closing): 3,500 N Holding force: 3,650 N Weight: 0.847 kg Clamp angle: 90° Special features Massive holding arm Horizontal foot mounting Blackened finish (Schwarz brüniert) Compact, low-weight design Category: Clamps FAQ How is the clamp mounted to a fixture? The horizontal toggle clamp 111 (Kukamet) is mounted via its horizontal foot, allowing secure plate installation with through-bolts or countersunk screws depending on the fixture design. What forces can be expected in operation? Rated values are a closing force of 3,500 N and a holding force of 3,650 N; these figures for the Kukamet 111 describe actuation demand versus sustained retention once engaged. Is the clamp suitable for frequent cycling in production? Yes, the 111’s simple toggle mechanism and massive holding arm are designed for repetitive use and require only routine inspection and occasional lubrication. Can the clamp reach into recessed fixtures? The 200 mm arm provides extended reach compared with shorter toggles, making the clamp suitable for deeper or slightly recessed clamping points in jigs and assembly fixtures. Where can replacement parts or technical drawings be obtained? Spare parts and technical details for the Kukamet horizontal toggle clamp 111 (SKU B111-4-D-C3) can be requested via Metav Werkzeuge for planning and maintenance purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Machine Table Clamp 100mm Reach 19.5x9.5mm Rail Slot - BESSEY
Take advantage of robust clamping performance with a 200 mm clamping height and a 100 mm throat, combined with a compact rail profile for stable machine-table integration; order the BESSEY clamp directly via Metav Werkzeuge or consult our specialists for fitment advice. BESSEY machine table clamp – 200 mm clamping height, 100 mm throat BESSEY machine table clamp designed for reliable workholding on machine tables and milling fixtures, offering a tall clamping range and narrow rail profile for compact installations. Clamping height 200 mm Throat depth 100 mm Rail cross-section 19.5 x 9.5 mm Industrial BESSEY construction High clamping range for versatile setups The BESSEY machine table clamp provides a clamping height of 200 mm, enabling secure fixation of components with significant profile height while maintaining easy access for tooling. This tall clamping capacity translates into fewer secondary operations and reduced setup time, which supports a steady production flow. The specification for throat depth of 100 mm allows firm holding closer to the workpiece centre, improving stability during machining and helping to maintain precise repeatability across batches. Compact rail profile for stable, space-saving mounting A narrow rail cross-section of 19.5 x 9.5 mm ensures the clamp integrates neatly into existing T-slot or machine table rails without occupying excessive space. The slim profile is advantageous where table real estate is limited, yet the design retains necessary stiffness for secure clamping. The combination of compact form and high clamping reach provides a practical balance between accessibility and rigidity, supporting accurate machining with minimal interference from the clamping hardware. Durable build and workshop-friendly operation Built to industrial expectations, this clamp emphasises robust construction and straightforward handling for daily workshop use. The engineered geometry concentrates clamping forces where required, reducing slippage and wear. For procurement and maintenance planning, the unit is supplied as a single pack, simplifying inventory control. Metav’s position as a precision partner further contributes to supply reliability, with stock and logistics aimed at keeping operations moving without compromise. Contact Metav Werkzeuge to confirm compatibility with existing fixtures and arrange prompt supply directly from Emmerich. Technical data Article number: 4123740020NW Brand: BESSEY Type: Machine table clamp Label: Maschinentischspanner Spann-H.200mm A.100mm Schienen-Q.19,5x9,5mm BESSEY Packaging unit: 1 Facts Clamping height: 200 mm Throat depth / reach: 100 mm Rail cross-section: 19.5 x 9.5 mm Special features Industrial-grade design Suitable for machine table mounting Compact rail profile for space-saving installation FAQ Is this clamp suitable for standard T-slot machine tables? The clamp is designed for machine table mounting and the BESSEY machine table clamp with its 19.5 x 9.5 mm rail profile can be integrated into many table systems; check slot compatibility to ensure a secure fit. How much clamping height does the unit offer? Clamping height is 200 mm, allowing the clamp to secure taller workplaces and fixtures while maintaining access for tooling operations. What is the throat depth and why does it matter? The throat depth is 100 mm; a deeper throat places the clamping force nearer the centre of the workpiece, increasing stability during machining. Does the package include additional mounting hardware? The product is supplied as a single unit (packaging unit: 1); any additional mounting adapters should be verified against the machine table specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Machine Table Clamp 120mm Throat, 28x11mm Rail Section - BESSEY
Combining a 200 mm clamping height, a 120 mm reach and a 28 x 11 mm rail cross-section, the BESSEY machine table clamp delivers reliable, repeatable workholding for machining tables; order directly via Metav Werkzeuge or consult the specialists for specification support. BESSEY Machine table clamp — 200 mm clamping height BESSEY Machine table clamp for secure vertical clamping on machine tables, designed for precise and stable workholding in industrial workshops 200 mm clamping height for tall setups 120 mm reach for deep workholding 28 x 11 mm compatible rail cross-section Industry-grade construction by BESSEY Stable holding for precise machining operations The combination of a 200 mm clamping height and a 120 mm reach provides a pronounced advantage when securing taller workpieces or fixtures. A greater clamping height allows the clamp to engage above bulky components without compromising accessibility, while the extended reach reduces the need for additional adapters. This results in consistent positioning and reduced setup time on the shop floor, improving throughput in milling, drilling and light assembly tasks. Clear rail compatibility reduces mounting uncertainty The specified 28 x 11 mm rail cross-section indicates the exact mounting profile required for secure attachment to standard machine table rails. Knowing this dimension removes guesswork when adapting jigs or t-slotted tables and ensures a mechanically stable interface. The explicit rail specification supports fast integration into existing fixtures and helps maintain repeatable alignment across production runs. Designed for industrial workflows and dependable duty Built by a recognised brand, the clamp emphasises robust mechanical performance and practical handling for daily workshop use. The straightforward geometry enables straightforward clamping actions and reliable locking of components, aiding quick changeovers and minimizing idle time. The result is a clamp that supports a smoother production flow and contributes to measurable efficiency gains in small to medium series work. For specification advice or to secure a BESSEY machine table clamp with 200 mm clamping height, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4123740040NW Label: Maschinentischspanner Spann-H.200mm A.120mm Schienenquerschnitt 28x11mm BESSEY Manufacturer: BESSEY Product type: Maschinentischspanner Packaging unit: 1 Core measurements Clamping height: 200 mm Reach / projection: 120 mm Rail cross-section: 28 x 11 mm UID / SKU: 4123740040NW Features and attributes Suitable for machine table mounting Industrial-grade construction Precise rail compatibility 28 x 11 mm Single-unit packaging FAQ What is the maximum clamping height of this clamp? The clamp offers a clamping height of 200 mm, allowing safe engagement above taller workpieces. Which rail profile is required for mounting? Mounting requires a rail with a 28 x 11 mm cross-section, ensuring a secure fit and repeatable alignment. What is the reach or projection of the clamp? The projection is 120 mm, suitable for securing parts positioned away from the rail face. Is this clamp intended for industrial use on machine tables? Yes, the BESSEY machine table clamp is designed for workshop and industrial machine table applications where stable workholding is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Three-Point Horizontal Clamp 3,650N Holding Force, 3,500N Clamping Force, 90° Massive Arm, Zinc-Plated - Kukamet
Benefit from a robust, galvanised design combined with a 3,650 N holding force and a secure safety lock that keeps production flowing with fewer interruptions; compact dimensions and a 200 mm arm support versatile fixturing. Order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 by Kukamet — galvanised lever clamp with safety lock and 3,650 N holding force The Horizontal clamp 112 is a lever-operated horizontal clamp designed for reliable workpiece fixation in jigs, fixtures and assembly stations where robust, repeatable clamping is required Galvanised finish for corrosion protection Massive holding arm with safety lock 3,650 N maximum holding force 200 mm arm for extended reach Dependable construction that minimises downtime The galvanised construction and massive holding arm deliver a durable solution for repetitive clamping tasks in industrial environments. Built to withstand workshop conditions, the clamp offers a consistent 3,650 N holding capacity while the rated pressing capacity of 3,500 N defines safe operating limits. The integrated safety lock reduces the risk of unintentional release during handling and assembly, contributing to steady cycle times and fewer rejects. This combination supports reliable production processes and lowers the frequency of replacements. Faster set-up and clear operational benefits As a lever-operated horizontal device, this clamp shortens set-up times and permits swift repositioning of parts. The 200 mm arm provides extended reach for slightly larger workpieces, while a compact mass of 0.73 kg keeps the unit lightweight for modular fixtures and tool carriers. Distinctions between holding force and pressing force are important: holding force indicates the maximum static retention capability, whereas pressing force denotes the usable clamp actuation force—both are balanced here to ensure effective clamping without overstressing components. The result is improved throughput with predictable, measurable performance. Simple integration and low-maintenance operation Designed for vertical foot mounting, the clamp installs cleanly into assembly tables or welded fixture plates, maintaining alignment at a 90° angle for standard horizontal clamping tasks. The galvanised surface reduces corrosion and the need for frequent upkeep, while the robust mechanics mean fewer interventions over time. A clear safety mechanism and straightforward lever action promote safe handling in shift work and automated stations. Durable materials and conservative ratings extend service life and reduce waste from premature replacements, supporting both operational efficiency and responsible resource use. For tailored clamping solutions from Kukamet, contact Metav Werkzeuge for technical consultation or to place an order — info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: 112-4-D-L-C3 GTIN: 8680731500622 Brand: Kukamet Weight: 0.73 kg Core specifications Max holding force: 3,650 N Max pressing force: 3,500 N Arm length: 200 mm Clamp angle: 90° Features and design Galvanised material Vertical foot mounting Massive holding arm Safety locking mechanism FAQ What is the maximum holding force of the clamp? The maximum holding force of the Horizontal clamp 112 is 3,650 N, providing secure retention for most fixture applications. What mounting method is required? The clamp uses a vertical foot mounting arrangement, allowing installation on fixture plates and assembly tables at a 90° angle. Is the surface protected against corrosion? Yes, the unit has a galvanised finish that provides corrosion resistance and lowers maintenance requirements. What are the arm length and weight of the device? The clamp features a 200 mm arm and weighs 0.73 kg, making it suitable for modular fixtures and adjustable set-ups. Does the clamp include a safety mechanism? A mechanical safety lock is integrated into the lever clamp to prevent accidental release during use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp Three-Point, 3,000 N Closing Force, Massive Holding Arm - Kukamet
Take advantage of a compact, robust clamping solution that combines a massive 200 mm holding arm, a proven safety locking mechanism and high clamping performance for reliable fixture processes; order the clamp directly via Metav Werkzeuge or contact our consultants for specification support. Vertical clamp 211 — Vertical toggle clamp with 200 mm arm and 3,000 N clamping force (Kukamet) Vertical clamp 211 is a compact fixture clamp for production and workshop jigs, engineered for repeatable vertical clamping tasks with a horizontal foot mounting arrangement Massive 200 mm holding arm Safety locking mechanism Clamping force 3,000 N Compact weight 0.89 kg Robust design that keeps fixtures steady The clamp features a massive holding arm that provides mechanical stability for repeated cycles, making it suitable for assembly jigs and small-batch production. With its blackened finish, the component resists surface wear while presenting a low-glare appearance on the shop floor. The solid construction translates into consistent contact pressure and reduced setup variability, which benefits processes that demand repeatability rather than cosmetic perfection. The combination of sturdy materials and straightforward geometry supports quick, secure positioning in modular fixture systems. Consistent clamping and secure locking for safe workflows Engineered for reliable force transmission, the device delivers up to 3,000 N clamping force and a 3,300 N holding force, values that enable secure retention of workpieces during machining, brazing or inspection operations. The integrated safety locking prevents unintentional release during handling, reducing the risk of workpiece displacement. This mechanical safeguard simplifies compliance with shop-floor safety practices while maintaining cycle speed — a rational benefit for operations where throughput and operator safety must align. Simple installation and space-conscious mounting Fitted with a horizontal foot mount, the clamp integrates directly into base plates and fixture blocks without complex adapters. The 200 mm arm reach allows for versatile placement relative to the workpiece, while the low weight of 0.89 kg keeps the overall fixture mass minimal. For system integrators and workshop managers, these attributes reduce fixture redesign time and simplify inventory, enabling faster line changes and fewer bespoke parts. The clamp’s geometry also aids accessibility, so tool paths and inspection probes are less likely to be obstructed. Practical advantage for everyday workshop use As a vertical toggle clamp, the unit is aimed at users who require robust performance in a compact footprint. The clear mechanical function — fast actuation, secure hold, and a visible locked state — supports operator confidence and reduces handling errors. The product’s straightforward mechanics mean maintenance is limited to routine checks and lubrication, contributing to low total cost of ownership in a pragmatic, long-term perspective. Specification transparency and reliable supply from Metav help ensure the clamp can be sourced and replaced with minimal disruption. Discuss fixture requirements with Metav Werkzeuge for the Kukamet Vertical clamp 211 (SKU B211-4-D-L-C3): call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and order support Technical Data Article number: B211-4-D-L-C3 EClass: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 200 mm Clamping force max: 3,000 N Holding force max: 3,300 N Weight: 0.89 kg Special features Horizontal foot mount Massive holding arm Safety locking mechanism Blackened finish Vertical toggle clamp FAQ What clamping forces does the Vertical clamp 211 provide? The Kukamet Vertical clamp 211 offers a clamping force up to 3,000 N and a holding force of 3,300 N for secure workpiece retention. Is the clamp suitable for integration into modular fixtures? Yes, the horizontal foot mounting and 200 mm arm length make the Vertical clamp 211 well suited for modular fixture plates and jig assemblies. What surface finish and durability features does the clamp have? The clamp is supplied with a blackened finish that reduces surface glare and improves resistance to everyday wear on the shop floor. How heavy is the unit and does it affect fixture dynamics? Weighing 0.89 kg, the vertical toggle clamp minimises added mass while providing the mechanical stability required for repeatable clamping. Does the product include a locking feature to prevent accidental release? The Kukamet Vertical clamp 211 is fitted with a safety locking mechanism that secures the clamped position during handling and processing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With 3,000N Thrust, Massive Holding Arm & Safety Lock, Black Oxide Finish - Kukamet
Rely on the combination of high holding force and a massive holding arm to secure workpieces reliably in repetitive clamping operations; the compact 200 mm arm and vertical foot make the clamp easy to integrate into fixtures. Order directly via Metav Werkzeuge or consult our advisors for a tailored recommendation. Vertical clamp 212 by Kukamet — 200 mm arm, 3,300 N holding force The Vertical clamp 212 is a compact vertical-action clamp designed for secure holding in fixture and workshop applications where repeatable clamping and space-saving mounting are required. Massive holding arm with safety lock 200 mm arm for extended reach Holding force up to 3,300 N Vertical foot mounting for secure fixing Secure, repeatable clamping for production use The 212 is engineered to deliver dependable, repeatable clamping through a combination of robust mechanics and a positive locking mechanism. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device provides a stable grip for short-cycle operations and fixture work. The massive holding arm and integrated safety lock reduce the risk of accidental release, which improves process reliability and operator safety. Technical details such as force ratings are stated to help planners assess suitability for specific clamping loads. Compact integration and durable surface treatment A lengthened 200 mm arm offers greater reach without adding significant bulk, allowing the clamp to be positioned where access is limited. The unit is finished in a blackened finish, which provides a hard-wearing surface that resists light wear and gives a consistent appearance across toolroom equipment. Designed for vertical foot mounting, this clamp is suited to fixed fixtures and modular tooling plates, supporting clean, space-saving integration into benches and jigs. Its low mass keeps additional load on the fixture to a minimum while maintaining rigidity. Practical handling, maintenance and application notes Operation follows classic lever-clamp principles, giving fast actuation and clear open/closed positions; the safety lock ensures the arm remains secure during machining or handling. The compact design and modest weight make the clamp suitable for a variety of applications, from small assembly jigs to larger fixture arrays. Routine maintenance is limited to simple lubrication and inspection of the locking mechanism; this minimises downtime and supports consistent performance. Where exact alignment is required, the clamp’s geometry supports straightforward datum referencing in fixtures. For reliable, workshop-ready clamping from Kukamet, contact Metav Werkzeuge for technical guidance and fast supply from Emmerich. Technical data Article number: B212-4-D-L-C3 Manufacturer: Kukamet Model: 212 Product type: Vertical clamp Facts Arm length: 200 mm Weight: 0.785 kg Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Special features Mounting: vertical foot Massive holding arm Safety lock incorporated Finish: blackened finish Story trigger: lever clamp design FAQ What clamping forces does the vertical clamp provide? The Vertical clamp 212 from Kukamet offers a maximum holding force of 3,300 N and a pressing force of 3,000 N (SKU B212-4-D-L-C3), values intended for evaluating load capacity in fixture design. Is the clamp suitable for installation on custom fixtures? Yes, the clamp’s vertical foot mounting and 200 mm arm length make the unit suitable for integration into custom jigs and tooling plates where vertical clamping is required. How does the safety lock work and why is it useful? The safety lock secures the massive holding arm in its closed position, preventing accidental release during handling or machining; this feature enhances operational safety and repeatability for Kukamet vertical clamps. What surface treatment does the clamp have and what are the benefits? The clamp is supplied with a blackened finish, which offers a durable, low-reflective surface that helps resist minor wear and provides a uniform toolroom appearance. What maintenance is required to keep the clamp operating reliably? Maintenance is limited to periodic lubrication of moving parts and inspection of the locking mechanism; these simple steps preserve function and reduce the likelihood of unscheduled downtime. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Horizontal Base, 3 000N Thrust, 3 300N Hold, Massive Arm & Safety Lock - Kukamet
Take advantage of a robust galvanised construction, a 200 mm holding arm and a dependable safety locking mechanism to secure workpieces with up to 3,300 N holding force; order the vertical clamp directly via Metav Werkzeuge or consult our advisors for application advice. Vertical clamp 211 — Kukamet vertical clamp with 200 mm arm and safety lock Vertical clamp 211 is a compact lever-operated vertical clamp designed for fast, repeatable positioning and secure workpiece retention in workshop and light industrial environments. Galvanised steel construction 200 mm holding arm for extended reach Safety locking mechanism for secure clamping Up to 3,300 N holding force Engineered for dependable, repeatable clamping The clamp is built from galvanised steel, providing corrosion resistance and long service life in workshop settings. The 200 mm arm increases reach without sacrificing rigidity, enabling consistent clamping across a range of component sizes. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device delivers measurable clamping performance; these values indicate the force available to hold a workpiece and the peak force the mechanism can apply during clamping. The compact mass of 0.89 kg keeps the system light enough for fixture assemblies while contributing to swift manual operation. Versatile mounting and clear application benefits Fitted with a horizontal foot, the clamp can be mounted to benches, jigs or fixture plates where a vertical clamping action is required. The lever-style operation provides immediate engagement, reducing cycle times compared with multi-component clamping systems. The galvanised finish eases integration into mixed-material environments, while the solid holding arm and simple mounting make the component suitable for production fixtures, repair benches and small-series assembly. The straightforward design minimises maintenance needs and keeps downtime to a minimum, supporting continuous workflows. Safety and usability that reduce process risk A dedicated safety locking mechanism prevents unintentional release, improving operator safety and protecting sensitive parts during machining or handling. The massive holding arm and secure lock together reduce the likelihood of slippage under load, which is particularly valuable when working with irregular or heavy components. The clamp’s manual actuation means no additional power source is required; this reduces complexity and avoids hidden operating costs. For teams seeking reliable, low-maintenance clamping, the device provides a predictable and safe solution. Discuss application-specific needs with Metav Werkzeuge or request procurement support for the Kukamet vertical clamp 211 — available from our Emmerich distribution with expert advice and reliable delivery Technical data SKU: 211-4-D-L-C3 GTIN: 8680731501360 Brand: Kukamet Weight: 0.89 kg Facts Arm length: 200 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety locking mechanism FAQ What materials can this clamp be used with? The Vertical clamp 211 from Kukamet is suitable for a wide range of workshop materials; the galvanised steel body and robust arm make it appropriate for common metals and fabricated parts in general clamping tasks. How does the holding force differ from the pressing force? The stated holding force (3,300 N) describes the clamp’s capacity to retain a workpiece under load, while the pressing force (3,000 N) indicates the maximum force applied during the clamping action on the Vertical clamp 211. Can the clamp be mounted in different fixture arrangements? Yes. The clamp features a horizontal foot for straightforward mounting to tables, fixture plates or jigs, enabling flexible placement in assembly and machining setups. Is the clamp suitable for frequent manual operation? The lever-operated design and low mass make the unit well suited to manual, repetitive use; the solid arm and safety lock support durability in repeated clamping cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Horizontal Base, Massive Support Arm, 3 000N Thrust / 3 300N Hold - Kukamet
Benefit from a compact combination of a solid 200 mm holding arm, galvanised corrosion protection and a high clamping capacity for dependable fixture work; the result is faster set-up times and consistent production results. Order the vertical clamp 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 — galvanised vertical toggle clamp with 200 mm arm (Kukamet) Vertical clamp 211 is a compact vertical toggle clamp designed for fixture and jig applications where a horizontal base and a sturdy holding arm ensure repeatable, secure workholding. Solid 200 mm holding arm Galvanised corrosion protection Horizontal base for stable mounting Holding force up to 3,300 N Faster, more reliable clamping for repetitive tasks The robust design of this clamp reduces setup time and minimises rework. The solid holding arm provides a stable contact area that maintains position under load, while the horizontal base enables straightforward, secure mounting to jigs and fixtures. With a 200 mm arm and a total weight of 0.924 kg, the unit balances reach and manoeuvrability, making it suitable for assembly benches and production fixtures alike. The construction supports repeatable clamping actions, which improves throughput and reduces the need for frequent adjustments. High clamping and pressing capacity for demanding operations Engineered for consistent force delivery, the clamp offers a pressing force of 3,000 N and a holding force of 3,300 N, providing a clear performance advantage for medium-duty applications. These figures indicate the clamp’s ability to resist both shear and tensile forces during processing, so components remain stable during manual and semi-automated operations. The galvanised finish adds a layer of protection against corrosion, extending service life in humid or workshop environments and ensuring dependable mechanical behaviour over many cycles. Simple integration and durable materials reduce lifetime costs Constructed from galvanised steel, the clamp integrates easily into existing fixtures and tooling layouts. The horizontal mounting arrangement simplifies positioning on plates and bases, while the compact footprint keeps work areas accessible. Because the component is built for durability rather than frequent replacement, maintenance intervals lengthen and commissioning is quicker, supporting a favourable cost-benefit ratio in production settings. The combination of a robust arm and corrosion-resistant finish translates into less downtime and a steady contribution to operational efficiency. Request advice from Metav Werkzeuge to match the 211 vertical clamp to specific fixtures or production needs — our consultants can confirm compatibility and delivery options. Technical data SKU: 211-4-D-C3 GTIN: 8680731501339 Brand: Kukamet Model: 211 Facts Weight: 0.924 kg Arm length: 200 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Special features Material: galvanised steel Mounting: horizontal base Solid holding arm Compact vertical toggle clamp design FAQ What is the primary application of this clamp? The 211 vertical clamp is intended for fixture and jig work where stable, repeatable vertical clamping is required; the galvanised construction suits workshop environments. Can the clamp withstand humid or workshop conditions? Yes, the galvanised finish on the 211 provides corrosion protection that extends service life in typical workshop and production settings. What forces can be expected during operation? The clamp delivers a pressing force of 3,000 N and a holding force of 3,300 N, offering reliable resistance to movement during assembly and processing. Is the clamp suitable for retrofit into existing fixtures? The horizontal base and compact footprint of the 211 simplify integration into existing jigs and assembly plates; Metav Werkzeuge can advise on mounting requirements. Which SKU should be referenced when ordering or enquiring? Please refer to SKU 211-4-D-C3 and GTIN 8680731501339 when discussing this vertical clamp with distributors or Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Holding Arm And Safety Lock, Zinc Plated, 3,000N Thrust / 3,300N Hold - Kukamet
Take advantage of a compact, galvanised vertical clamp with a 200 mm arm and a secure safety lock to keep workpieces steady under high loads; its high holding capacity supports reliable cycle times and reduced rework. Order or request technical guidance directly via Metav Werkzeuge for a seamless integration into existing fixtures. Vertical clamp 212 — galvanised, 200 mm arm and safety lock (Kukamet) A robust Vertical clamp 212 for vertical mounting, designed to secure workpieces in production and workshop fixtures with a compact footprint and high holding capacity Galvanised steel construction 200 mm robust holding arm Safety locking mechanism Holding force up to 3,300 N Secure clamping for consistent production quality The Vertical clamp 212 provides a predictable hold that reduces part movement and rework. A 200 mm arm delivers reach while the combination of a controlled clamping action and a 3,300 N holding force ensures components remain stable during machining, assembly or inspection. The specified 3,000 N clamping force is designed to generate sufficient pressure for most fixture applications without excessive overloading, which supports repeatable processing and consistent output quality. Space-saving vertical mounting for easy integration Engineered for vertical mounting on fixtures, the clamp uses a vertical foot mounting arrangement that occupies little horizontal space and can be aligned in rows along tooling plates. Its compact mass (approx. 0.785 kg) and straightforward geometry allow quick placement in modular fixture systems, helping to streamline setup times. The galvanised finish offers straightforward corrosion resistance, making the clamp suitable for general workshop environments and mixed-material production lines. Robust construction that minimises downtime Made from galvanised steel with a massive holding arm and a mechanical safety lock, this clamp is built to withstand regular cycle use. The safety locking mechanism prevents accidental release under load, improving operator safety and process reliability. The durable finish and simple mechanism reduce maintenance intervals and spare-part needs, supporting long-term availability and lower total cost of ownership for shops and light industrial applications. For secure vertical clamping with proven holding power choose the Kukamet solution and contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 212-4-D-L-C3 GTIN: 8680731501742 Material: galvanised steel Mounting: vertical foot Special features: massive holding arm; safety locking mechanism Facts Arm length: 200 mm Weight: 0.785 kg Max clamping force: 3,000 N Max holding force: 3,300 N eClass: 21041717 ETIM: EC011973 Special features Galvanised finish Massive holding arm Safety locking mechanism Lever clamp application (lever clamp design) FAQ What clamping capacity does this clamp provide? The clamp delivers a maximum clamping force of 3,000 N and a holding capacity of up to 3,300 N, suitable for many fixture and assembly tasks where secure retention is required. Can the clamp be mounted on standard tooling plates? Yes, the vertical foot mounting is compatible with typical fixture plates and allows compact alignment within modular tooling arrangements. Is the finish suitable for workshop environments? The galvanised finish provides basic corrosion resistance for general workshop use and reduces the need for frequent surface maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Holding Arm, 3.3kN Hold Force, 3kN Press Force - Kukamet
Take advantage of the robust 200 mm reach and up to 3,000 N clamping force for dependable workholding in small-series production and workshop settings; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 212 by Kukamet — sturdy vertical workholding with 200 mm arm and 3,000 N force A Vertical clamp 212 designed for upright installation where secure, repeatable clamping is required in machining, assembly and general fixture setups. Massive holding arm for stable clamping 200 mm reach for versatile positioning Up to 3,000 N clamping force Blackened finish for corrosion resistance Stable clamping for repeatable results The clamp combines a massive holding arm with a high-rated clamping force (3,000 N) to deliver consistent workpiece retention on jigging and machining operations. The specified holding force (3,300 N) refers to the maximum static retention capability that reduces micro-movement during machining, which in turn helps to maintain machining tolerances and reduce rework. This mechanical robustness translates into fewer stoppages and more predictable cycle times in production environments, making the device suitable where repeatability and process stability are priorities. Flexible mounting and precise positioning Equipped with a 200 mm arm, the device provides extended reach for fixtures that require clearance or off-centre clamping. The vertical foot mounting allows upright installation on tooling plates, benches or dedicated fixtures and supports compact footprint planning in workstations. At approximately 0.938 kg, the clamp balances structural strength with ease of handling during assembly into jigs. The blackened finish offers an additional protective layer against corrosion, extending service life in mixed workshop conditions while maintaining a modest aesthetic that integrates into industrial setups. Low-maintenance design built for workshops Designed for straightforward integration, the clamp’s plain mechanical construction reduces maintenance overhead compared with more complex hydraulic or pneumatic clamps. The massive arm construction minimises wear to pivot points and contact surfaces under normal operating loads, contributing to longer intervals between service events. For toolrooms and small production lines seeking robust, economical workholding, this solution offers a reliable option that supports steady throughput without necessitating specialised maintenance regimes. For reliable workholding solutions from Kukamet, contact Metav Werkzeuge for technical advice or to request the Vertical clamp 212 (SKU B212-4-D-C3) via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B212-4-D-C3 GTIN: 8682843522356 eClass: 21041717 ETIM: EC011973 Facts Arm length: 200 mm Weight: 0.938 kg Clamping force (max): 3,000 N Holding force (max): 3,300 N Versions / Special features Material/finish: blackened finish Mounting: vertical foot Design: massive holding arm Category: spanner / clamp Designation: Vertical clamp 212 FAQ What clamping force can be expected from this device? The Vertical clamp 212 delivers a maximum clamping force of 3,000 N with a holding capacity up to 3,300 N, providing secure retention for typical workshop applications. Is the clamp suitable for upright installation on a fixture plate? Yes, the device is supplied for vertical foot mounting, making the clamp suitable for installation on fixture plates, benches or dedicated uprights. How does the 200 mm arm affect application use? The 200 mm reach increases flexibility for off-centre clamping and allows clearance for tools and spindles, aiding in fixture layout and workpiece accessibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Holding Arm, 3.3kN Holding Force, Zinc-Plated - Kukamet
The sturdy design and galvanised finish deliver reliable clamping with up to 3,300 N holding force and a maximum pressing force of 3,000 N, making this vertical clamp ideal for repeatable fixture work. Benefit from a 200 mm arm and a massive clamping arm that improve rigidity and reduce setup time; order the clamp directly via Metav Werkzeuge or contact our advisers for application advice. Vertical clamp 212 — Kukamet vertical clamp with 200 mm arm and galvanised finish Vertical clamp 212 is a compact, high-force vertical clamping device intended for fixtures, jigs and general workshop use 200 mm arm length Massive clamping arm for rigidity Up to 3,300 N holding force Galvanised finish for corrosion resistance Secure, high‑force clamping for stable setups The 200 mm arm combined with a massive clamping arm ensures consistent contact pressure across the workpiece, providing secure positioning during machining or assembly. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device reduces the risk of component movement under load, which helps to lower rework rates and improves process reliability. The compact footprint supports efficient use of bench or fixture space while maintaining robust performance. Durable construction that resists workshop wear Constructed in a galvanised finish, the clamp is protected against surface corrosion commonly encountered in busy workshop environments. The vertical foot mounting provides a stable base for integration into stations and jigs, and the unit’s modest mass of 0.938 kg keeps the assembly lightweight without compromising stiffness. This combination of durability and low maintenance supports continuous operation and extends service intervals. Fast, ergonomic operation for everyday use Designed with a lever‑style actuation concept, the clamp offers intuitive manual handling that speeds repetitive clamping tasks. The lever approach delivers fast engagement and clear tactile feedback for secure locking, which improves throughput on repetitive fixtures and simplifies operator training. The straightforward mechanical design also minimises adjustment complexity, enabling quick setup changes and shorter downtime between jobs. Practical integration into fixtures and production jigs The vertical clamping device suits a wide range of workshop and production environments where fixed, reliable clamping is required. Its compact measurements and standard mounting make it straightforward to fit into bespoke fixtures or retrofit onto existing plates. The galvanised surface and robust arm design provide predictable behaviour under repeated cycles, supporting stable processes and consistent part quality. Choose the Kukamet vertical clamp 212 for robust, repeatable clamping — order via Metav Werkzeuge in Emmerich or call +49 2822 7131930 for tailored application guidance Technical data SKU: 212-4-D-C3 GTIN: 8680731501711 eClass: 21041717 ETIM: EC011973 Facts Arm length: 200 mm Weight: 0.938 kg Maximum holding force: 3,300 N Maximum pressing force: 3,000 N Special features Galvanised material Vertical foot mounting Massive clamping arm Category: Clamp / Spanner FAQ What is the maximum holding force of this clamp? The vertical clamp 212 offers a maximum holding force of 3,300 N, suitable for demanding fixture tasks. Can the clamp be mounted on a fixture plate? Yes, the 212 is designed for vertical foot mounting and integrates readily into fixture plates and jigs. Is the surface protected against corrosion? The unit features a galvanised finish that provides enhanced resistance to surface corrosion in workshop environments. What benefits does the massive clamping arm provide? The massive clamping arm increases rigidity and improves repeatability, helping to maintain secure contact under load. Which model and SKU should be referenced when ordering? Please reference the Kukamet vertical clamp 212, SKU 212-4-D-C3, when placing orders or enquiring about specifications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Support Arm, 3,000N Thrust / 3,300N Holding Force - Kukamet
Take advantage of the combination of a massive holding arm, precise 3,300 N holding force and a compact 200 mm reach for reliable clamping in production and workshop setups. Order the clamp directly via Metav Werkzeuge or consult the team for application advice. Vertical clamp 211 – Vertical clamp with 200 mm arm and 3.3 kN holding force (Kukamet) the Vertical clamp 211 is a compact vertical clamping device designed for secure workholding in machinery, jigs and general workshop fixtures, combining a robust arm with a horizontal mounting foot for stable attachment. Massive holding arm for higher rigidity 3,300 N holding force for secure clamping 200 mm arm reach for extended grip Horizontal foot for straightforward installation Consistent clamping performance for machining operations The solid design delivers reliable clamping behaviour even under intermittent loads. With a rated holding force of 3,300 N and a maximum pressing force of 3,000 N, the device provides the physical capacity required for many light to medium machining and assembly tasks. The difference between holding and pressing force is deliberate: the higher holding value indicates the maximum static retention capacity, while the pressing figure refers to the actuation load — both values together ensure predictable performance in repetitive operations. This mechanical certainty supports fewer re-clamps and therefore steadier cycle times on the shop floor. Quick integration into existing fixtures and jigs A horizontal foot simplifies mounting onto plates and tooling blocks, reducing setup time and alignment work. The 200 mm arm extends the clamping reach without compromising stiffness thanks to the massive holding arm construction, which reduces flex during tightening. Engineers benefit from straightforward mechanical integration: the clamp can be fixed in a familiar orientation, requiring only basic mounting preparation and standard fasteners to achieve a secure hold. Durable finish and compact footprint for long service life Finished in a blackened coating, the clamp resists superficial wear and presents a low-maintenance surface that conceals minor abrasions from everyday handling. At under 1 kg in mass, the component brings robustness without significant added weight, allowing use in mobile jigs and fixtures. The compact footprint supports denser tooling layouts and helps conserve space on fixture plates, contributing to a tidier, more efficient production environment. Suitable applications and practical benefits The device is ideal for production jigs, assembly stations and CNC fixtures where a vertical clamping action is required. Its specification supports quick-change setups and repetitive production runs: the combination of stiff arm geometry and rated forces reduces the risk of part movement during drilling, milling or light presswork. The clamp’s form factor also facilitates incorporation into both manual and semi-automated processes, helping to standardise workholding across small workshops and larger workstations alike. For procurement or technical matching of the Kukamet vertical clamp 211, contact Metav Werkzeuge for precise delivery options and application guidance — Metav Werkzeuge provides expert advice and direct supply from Emmerich. Technical Data SKU: B211-4-D-C3 GTIN: 8680731507751 Manufacturer: Kukamet Facts Arm length: 200 mm Weight: 0.924 kg Holding force: 3,300 N Maximum pressing force: 3,000 N eCl@ss: 21041717 ETIM: EC011973 Special features Mounting: horizontal foot Massive holding arm Finish: blackened Category: Spanner FAQ What is the primary clamping capacity of the Vertical clamp 211? The Vertical clamp 211 provides a holding force of 3,300 N and a maximum pressing force of 3,000 N, suited to light and medium production tasks. How is the clamp mounted to a fixture or plate? The clamp is mounted via a horizontal foot, allowing straightforward attachment to fixture plates and tooling blocks. What is the functional reach of the arm? The clamp features a 200 mm arm, combining extended reach with a robust arm design for reduced flex. Is the surface treatment suitable for industrial environments? Yes, the blackened finish offers basic surface protection against wear and is suitable for workshop conditions. Can the clamp be used in mobile jigs or portable setups? At approximately 0.924 kg and with a compact footprint, the clamp is practical for mobile jigs and portable fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Horizontal Clamp Automatic Clamp Height Adjustment, 1,100 N - BESSEY
A compact solution combining automatic clamping height adjustment with a 1,100 N clamping force ensures fast, repeatable horizontal fixation and reduced setup time; order the BESSEY STC-HH20 directly via Metav Werkzeuge or consult the technical team for application support. BESSEY STC-HH20 Horizontal Clamp (Size 20) — Automatic Height Adjustment, 1,100 N The BESSEY STC-HH20 Horizontal Clamp offers robust horizontal clamping on a dedicated base plate, optimised for repeatability and short cycle times in workshop and production environments Automatic clamping height adjustment Max. clamping force 1,100 N Size 20 with 167 mm jaw length Adjustable spindle range 26–31.75 mm Consistent clamping that cuts cycle time The combination of automatic clamping height adjustment and a rated 1,100 N clamping force delivers dependable holding power with minimal operator intervention. Automatic height compensation reduces the need for manual readjustment when part thickness varies, so set-up errors and rework are lowered and fixture throughput is improved. Efficiency gains arise from fewer handling steps and from the clamp's ability to maintain consistent pressure across repetitive cycles, which is especially beneficial in medium-volume production and jigs where repeatability matters. Compact dimensions for flexible fixture design Designed as a horizontal base-plate clamp, the unit features a jaw length of 167 mm (L1) and an adjustable spindle range of 26–31.75 mm (M), enabling secure positioning across a variety of workpiece profiles. Additional measured points — A 10 mm, B 45 mm, C 13 mm, E 20 mm, H1 25 mm, I 10 mm, N 42 mm, P 45 mm — support precise planning when integrating the clamp into existing tooling. The modest footprint and clearly defined dimensions make the device straightforward to implement on modular tooling boards and bespoke fixtures, allowing engineers to predict spatial requirements and ensure reliable clearance for adjacent operations. Built for workshop reliability and straightforward integration Manufactured by BESSEY, this horizontal clamp is intended for frequent use in both trade workshops and light industrial settings where dependable clamping and rapid turnaround are required. The mechanism is engineered for low maintenance and long service life; routine checks and lubrication prolong operational performance. Its horizontal base-plate format facilitates mounting in standard fixture layouts and supports modular assembly processes. As a component in an optimised workholding strategy, the clamp contributes to reduced cycle variation and improved downstream quality outcomes. Contact Metav Werkzeuge to discuss deployment of the BESSEY STC-HH20 for specific fixtures, request a quotation or obtain detailed technical drawings — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000831133NW Type: STC-HH Product: Horizontal clamp Brand: BESSEY Execution: automatic clamping height adjustment Packaging unit: 1 Facts Max. clamping force: 1,100 N L1 (jaw length): 167 mm M (adjustable spindle range): 26–31.75 mm A: 10 mm B: 45 mm C: 13 mm E: 20 mm H1: 25 mm I: 10 mm N: 42 mm P: 45 mm Special features Automatic clamping height adjustment Horizontal base plate version Size: 20 FAQ What is the maximum clamping force of the clamp? The clamp provides a maximum clamping force of 1,100 N, as specified for the BESSEY STC-HH20. Which dimensions are relevant for fixture design? Key dimensions for fixture planning include the jaw length L1 = 167 mm and the adjustable spindle range M = 26–31.75 mm; further dimensional data (A, B, C, E, H1, I, N, P) are available in the technical data. Is the height adjustment automatic or manual? The STC-HH20 features automatic clamping height adjustment, enabling compensation for varying part heights without manual re-setting. Can the clamp be mounted on a modular fixture plate? Yes, the horizontal base-plate design of the STC-HH20 is compatible with standard modular fixture arrangements and can be integrated into existing workholding systems. Which brand manufactures this horizontal clamp and what is the article number? This horizontal clamp is manufactured by BESSEY and is listed under article number 4000831133NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Horizontal Clamp Variable Open Holding Arm Angle Base M6 x 40 Pressure Screw, Max 2000 N - AMF
Reliable clamping with a variable open holding arm and angled base enables secure, repeatable workholding and rapid set-up; combined with automatic height compensation and a 2,000 N maximum clamping force this results in stable machining and less rework — order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. AMF Horizontal Clamp No. 6871, Size 20 — Angle Base, Variable Open Holding Arm The AMF Horizontal Clamp No. 6871, Size 20, Angle Base is a compact horizontal clamp for secure workholding in machining and assembly applications, featuring a variable open holding arm and an angled base for flexible mounting. Variable open holding arm for versatile use Angle base for flexible mounting options Automatic height compensation 20–35 mm Max. clamping force 2,000 N Secure and consistent workholding for production use This horizontal clamping solution offers repeatable clamping thanks to its robust kinematics and a specified maximum clamping force of 2,000 N, which ensures components remain stationary during machining or assembly. The design includes a variable open holding arm, enabling quick positioning of irregular or bulky parts without complex adjustment. Built-in adjustability reduces set-up time and helps maintain consistent cycle times on the shop floor. Rapid height adjustment reduces set-up complexity Featuring automatic height compensation (S = 20 mm) and a maximum compensating range of 35 mm, the device adapts to slight differences in workpiece height without manual shimming. This automatic compensation minimises the need for re-clamping and supports continuous operation across batches with variable stock thickness. The integrated pressure screw (M6 x 40) provides controlled actuation and reliable pressure application for repeatable results. Compact angle base for flexible fixture construction The angled base provides multiple mounting orientations, making it straightforward to integrate into custom fixtures or modular tooling plates. With a total length (L1) of 173 mm and defined interface dimensions such as B = 56 mm and E = 22 mm, the clamp fits tight assemblies while offering sufficient reach and clearance. The open holding arm configuration supports quick loading and unloading, improving throughput in assembly and inspection stations. Practical adjustment range and workshop durability Key adjustment values such as the clamping jaw range (C = 20–26 mm) and work height limits (HW min. -3 mm / HW max. 24 mm) make it simple to determine suitability for specific parts. The unit’s compact form and clearly defined interface dimensions facilitate predictable integration into existing tooling. With a packaging unit of 1, the product is delivered ready for installation in single-piece applications or as a spare part for maintenance. Contact Metav Werkzeuge today to discuss integration options for this AMF horizontal clamp and secure reliable, precision workholding for your production line Technical Data Article number: 4123572011NW Type: 6871 Product label: Waagrechtspanner Nr.6871 Gr.20 Winkelfuß AMF Facts Clamping force, max: 2,000 N Automatic height compensation S: 20 mm Max. height compensation: 35 mm C (clamping range): 20–26 mm B: 56 mm L1: 173 mm H: 68 mm H1: 94 mm H2: 113 mm D / D1: 5.6 mm A: 6 mm E: 22 mm F: 24 mm I: 10 mm K: 7.1 mm M: 25.4 mm N: 45 mm P: 38 mm HW min.: -3 mm HW max.: 24 mm Pressure screw: M6 x 40 Packaging unit: 1 Special features Variable execution; open holding arm; angled base Automatic height compensation Compact dimensions for tight fixtures Designed for machining and assembly workholding FAQ What is the maximum clamping force of this clamp? The clamp delivers a maximum clamping force of 2,000 N, which ensures secure fixation for typical machining and assembly tasks with the AMF Horizontal Clamp No. 6871, Size 20. How much height compensation is available? Automatic height compensation is 20 mm, with a maximum compensating range of 35 mm, allowing the clamp to accommodate small variations in workpiece height without manual shimming. Which clamping range does the device support? The clamping jaw range is 20–26 mm (C), suitable for many small to medium-sized components used in fixtures. Is the angled base suitable for modular fixture plates? Yes, the angle base permits flexible mounting orientations and straightforward integration into modular tooling plates or custom fixtures. What mounting and interface dimensions are specified for integration? Key interface dimensions include L1 = 173 mm, B = 56 mm, E = 22 mm, and hole diameters D / D1 = 5.6 mm, enabling predictable installation in existing setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Pneumatic Clamp With 95° Horizontal Foot, 750N Push / 1000N Hold, Zinc Coated Heavy Arm - Kukamet
Take advantage of the combination of robust galvanised construction, reliable 1,000 N holding force and compact horizontal-foot mounting for consistent clamping in production environments; order the Pneumatic clamp 611 directly via Metav Werkzeuge or consult our specialists for tailored advice. Pneumatic clamp 611 by Kukamet — compact pneumatic lever clamp with galvanised massive arm Pneumatic clamp 611 is a lever-style pneumatic clamp designed for repetitive fixture and workholding tasks in workshops and light industrial production. Robust massive holding arm Horizontal-foot mounting for secure fixation Galvanised for increased corrosion resistance Up to 1,000 N holding force Faster, repeatable clamping through pneumatic actuation The pneumatic actuation principle delivers consistent, high-speed clamping cycles that reduce setup time and improve throughput. A 20 mm piston with a maximum actuation force of 750 N provides the mechanical drive needed for rapid engagement while preserving repeatability over thousands of cycles. This pneumatic operation is particularly effective where manual lever clamping would introduce variability; the result is more reliable process control and fewer reworks. Durable design for daily industrial use Constructed with a massive holding arm and a galvanised finish, the clamp resists wear and corrosion in workshop conditions. The 44 mm arm length and a clamping angle of 95° ensure good reach and clearance for a wide range of jigs and fixtures, while the specified 1,000 N holding capacity secures parts during machining, assembly or inspection. The combination of solid mechanics and protective coating translates into longer service life and predictable performance. Simple installation and versatile applications The clamp is supplied with a horizontal foot for stable mounting to tables, plates or bespoke fixtures, allowing easy integration into existing setups. Its compact footprint and lever geometry make it suitable for woodworkers, metal workshops and fixture builders who require rapid locking and unlocking without complex adjustments. Routine maintenance is limited to periodic inspection of moving parts and air supply quality, ensuring low lifetime operating costs and minimal downtime. Request a technical consultation from Metav Werkzeuge for the Kukamet 611 pneumatic clamp — precise specifications, compatibility checks and ordering support are available directly from Metav Werkzeuge Technical data Article number: 611-1-Q20-D-C1 Brand: Kukamet Type: Pneumatic clamp 611 ECLASS: 21021004 ETIM: EC011973 Facts Arm length: 44 mm Clamping angle: 95° Maximum actuation force: 750 N Maximum holding force: 1,000 N Piston diameter: 20 mm Special features Massiver Haltearm (massive holding arm) Horizontal-foot mounting Galvanised material Category: Spanner FAQ What materials is the clamp suitable for? The Kukamet 611 pneumatic clamp is designed as a general-purpose workholding device; suitability depends on fixture design and process forces rather than the clamp alone. How much clamping force does the unit provide? The clamp provides a maximum holding force of 1,000 N and a maximum actuation force of 750 N, values intended to guide fixture and process design. How is the clamp mounted? The unit is fitted for horizontal-foot mounting, enabling secure attachment to plates or machine tables without additional adapters. What maintenance is required? Routine checks of the air supply quality, seals and pivot points are recommended; the galvanised finish reduces corrosion-related maintenance. Can the clamp be used in automated fixtures? Yes, the pneumatic actuation and compact lever geometry make the clamp suitable for semi-automated and automated fixtures where pneumatic control is available. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Pneumatic Push Rod Clamp Zinc Cast Body 7.5kN Thrust, 18.45kN Holding Force - Kukamet
Combine robust zinc-plated construction with a compact piston Ø 20 mm and a maximum thrust of 7,500 N for secure, repeatable clamping in production fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Pneumatic Push-Rod Clamp 672 — 7,500 N thrust, zinc-plated cast body Kukamet Pneumatic Push-Rod Clamp 672 is a pneumatic actuator for industrial fixtures, designed for rapid actuation and high holding capacity in manufacturing and assembly jigs Zinc-plated cast body for durable service life 7,500 N maximum thrust for secure clamping 18,450 N holding force for load retention Piston diameter 20 mm for compact installation Industrial construction for long service life The clamp combines a zinc-plated finish with a cast body to resist corrosion and mechanical wear in workshop and production environments. The solid housing reduces deformation under load, which contributes to consistent clamping behaviour over long production runs. Thanks to the robust design and a mass of 5.26 kg, the unit provides a stable base for repetitive cycles while maintaining positional accuracy in fixtures and tooling plates. Precise force control and secure retention With a maximum thrust of 7,500 N and a holding force rated at 18,450 N, the device ensures reliable part retention during machining, welding or assembly. The difference between actuation force and holding force is explained by the mechanical design of the push-rod and contact geometry; this results in secure clamping even under vibration or dynamic loads. The compact piston Ø 20 mm supports fast stroke response while keeping the actuator footprint minimal for space-constrained jigs. Easy integration and practical maintenance Configured for horizontal-foot mounting, the actuator fits typical fixture bases and can be fastened quickly to existing plates. The horizontal foot arrangement simplifies alignment and replacement in modular tooling. Routine upkeep is straightforward: the zinc plating reduces the need for frequent surface protection, and the cast construction minimises deformation-related service. Metav’s product documentation and technical advisors can assist with selection of mounting hardware and pneumatic supply parameters for efficient commissioning. Order the Kukamet Pneumatic Push-Rod Clamp 672 via Metav Werkzeuge for dependable fixture clamping, or request tailored application advice from our consultants. Technical Data Article number: 672-5-Q20 GTIN: 8680731505313 Manufacturer: Kukamet SKU: 672-5-Q20 Core measurements Maximum thrust: 7,500 N Holding force: 18,450 N Piston diameter: 20 mm Weight: 5.26 kg eClass: 21041716 ETIM: EC011973 Features and mounting Zinc-plated with cast body Horizontal foot mounting Category: Spanner Files: product image and catalogue PDF available FAQ What is the primary use of this pneumatic clamp? The Kukamet pneumatic push-rod clamp 672 is designed for securing components in industrial fixtures, jigs and production lines where reliable, repeatable clamping is required. How do the thrust and holding forces relate in practice? The specified 7,500 N thrust is the actuation force; the higher holding force of 18,450 N reflects the mechanical retention capability once clamped, ensuring parts remain secure under dynamic conditions. Can the clamp be mounted on standard tooling plates? Yes. The unit is supplied for horizontal-foot mounting, making it compatible with common tooling and fixture plates used in manufacturing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com