CPMT 090308 GT9530 Wendeplatten - Tungaloy
Benefit from a coated cermet GT9530 grade that delivers a high‑quality surface and extended tool life in stable turning operations; the 0.8 mm nose radius and ISO‑standard geometry support fine finishing and repeatable results. Order directly via Metav Werkzeuge or consult the specialists for application advice and availability. CPMT 090308 GT9530 turning indexable insert — Tungaloy, coated cermet, ISO rhombic The CPMT090308 GT9530 is an ISO‑standard rhombic turning insert intended for finishing and light universal turning of steel, offering a balance of surface quality and wear resistance. Coated cermet grade GT9530 ISO‑standard turning insert Single‑sided chipbreaker for stable cuts 0.8 mm nose radius for fine finishing Higher quality finish with coated cermet performance The insert uses a coated cermet grade engineered for improved surface quality and enhanced resistance to abrasive wear in steady cutting conditions. With a modest 0.8 mm radius, the geometry supports precise edge engagement that reduces vibration and produces consistent component faces. The combination of the cermet substrate and coating extends cutting intervals under stable setups, lowering machine downtime and contributing to a more efficient production flow. Secure clamping and ISO compatibility for predictable results Manufactured to the ISO standard for indexable turning plates, the rhombic form and hole design ensure straightforward mounting in compatible holders. The insert features a cylindrical hole with a single‑side countersink (40°–60°) and an 11° relief angle, factors that determine fit, clamping stability and cutting edge orientation. These standardised dimensions simplify tool selection and spare‑part logistics, ensuring repeatable positioning and consistent cutting angles across tool changes. Application focus: finishing and light universal turning of steel Designed primarily for turning operations on steel where a precision finish is required, the single‑sided chipbreaker steers chips reliably under stable cutting conditions and when feeds and depths are controlled. The grade is best suited to finishing to light roughing passes where surface integrity and longer tool life are priorities. For customers unsure about the optimal grade or chipbreaker choice for a specific setup, technical assistance is available to match insert geometry and grade to machine rigidity, clamping method and workpiece material. For application advice, availability or to secure genuine Tungaloy CPMT 090308 GT9530 inserts, contact Metav Werkzeuge for tailored recommendations and prompt handling Technical data Article number: 6998321 SKU: 6998321‑Tungaloy Manufacturer SKU: TUN6998321 Brand: Tungaloy Model series: ISO‑turning indexable inserts Application: Turning Shape: Rhombic (09) Facts Corner radius: 0.8 mm Thickness: 3.18 mm Insert size: 09 Relief angle: 11° Main angle: 80° Special features Coated cermet grade GT9530 Single‑sided chipbreaker Cylindrical hole + single‑side countersink (40°–60°) ISO compatibility for standard holders Suited for finishing and light universal turning of steel FAQ What materials is this insert intended for? The CPMT090308 GT9530 insert is optimised for steel machining, offering a cermet coating and chip control geared towards finishing and light universal turning applications. How does the chipbreaker affect performance? The single‑sided chipbreaker on the Tungaloy insert promotes controlled chip formation during stable cuts, which helps maintain surface quality and extends tool life under appropriate cutting parameters. Which holders are compatible with this ISO plate? Compatibility depends on holder form, mounting location, clearance angle and thickness; the ISO rhombic format and the cylindrical hole with countersink enable use in standard ISO holders that accept CPMT‑format plates. Is this insert suitable for roughing operations? This grade is designed primarily for finishing and light universal turning; for heavier roughing, a different chipbreaker or a more robust grade may be preferable. What determines the fit in clamping systems? Fit is dictated by plate form, free or relief angle, tolerance class, fixation method, size and thickness—factors that are standardised for ISO turning plates to ensure secure clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090308 GT9530 Wendeplatten - Tungaloy
Combining coated cermet durability and the ISO CPMT090308 form factor delivers consistent finishing performance and extended tool life in stable turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 090308 GT9530 — Tungaloy turning insert (ISO 090308) The CPMT 090308 GT9530 is an ISO‑standard rhombic turning insert designed for finishing and light universal turning of steel under stable machining conditions. Coated cermet GT9530 for wear resistance ISO CPMT090308 rhombic insert, 11° relief Excellent surface finish for steel finishing Compatible with standard holders, with hole Longer tool life through the GT9530 coating The coated cermet grade GT9530 combines a wear‑resistant coating with a fine, hard substrate to extend tool life during finishing operations. Cermet grades are engineered to resist abrasive wear while maintaining edge integrity, which results in fewer insert changes and more predictable process windows. In practice, this means reduced downtime and lower tooling costs per component when machining steel with stable setups. The coating improves resistance to built‑up edge and helps preserve the cutting edge at moderately elevated temperatures. Consistent surface quality with optimised geometry The rhombic geometry and small corner radius provide controlled engagement and a fine surface result. The insert features a 0.8 mm corner radius and an 11° relief angle with an 80° included angle; the plate thickness is 3.18 mm, giving a stable seating in the pocket and predictable chip formation. These dimensional choices favour finishing passes where minimal cutting forces and good surface integrity are essential. The single‑sided chipbreaker is configured for light to medium feeds, helping to produce consistent chip shapes and to protect the cutting edge during interrupted cuts. Seamless integration into ISO tool systems Compatibility with tooling systems is determined by shape, relief, tolerance class, clamping method, size and thickness. The ISO designation CPMT090308 ensures that the insert fits a wide range of standard holders and boring bars when the correct pocket and clamping set are used. This insert is supplied with a central hole configuration — a cylindrical hole plus a one‑side countersink (40°–60°) — that matches many common clamping screws and locators. For system assembly, pair the insert with the appropriate outer holder or boring bar, a suitable backing pad or clamping set, and the correct replacement screw. Select the right grade and chipbreaker for the job The GT9530 grade is intended as a wear‑resistant finishing to light universal grade for steel, delivering a superior surface finish and longer life under stable cutting conditions. For different workpiece materials or unstable setups, selecting an alternative chipbreaker or a more tolerant grade will optimise productivity. In stable setups, this insert enables predictable cycle times and fewer interruptions, supporting smooth production flows and repeatable part quality. Contact Metav Werkzeuge for specific machining recommendations on the Tungaloy GT9530 grade and to check current availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998315 SKU: 6998315-Tungaloy Manufacturer SKU: TUN6998315 Model series: ISO turning indexable inserts Grade: GT9530 (coated cermet) Material: cemented carbide Application: turning Shape: rhombic Hole: with hole; cylindrical hole + one‑side countersink (40°–60°) Core dimensions Size designation: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 80° Special features Single‑sided chipbreaker ISO CPMT090308 designation Coated cermet grade GT9530 Suitable for steel finishing Compatible with standard holders, clamping set and replacement screws FAQ What materials is this insert suitable for? The CPMT090308 GT9530 Tungaloy insert is a coated cermet grade designed primarily for steel finishing; it performs best under stable cutting conditions where good surface quality and extended tool life are required. What does the designation CPMT090308 indicate? CPMT090308 denotes the ISO form and size: a rhombic plate with the 09 size designation and the 0308 nose geometry, ensuring compatibility with ISO‑specified holders and pockets. How does the GT9530 grade affect machining performance? The GT9530 coating enhances wear resistance and edge life on finishing passes; as a cermet grade it reduces built‑up edge tendency and supports consistent surface finishes in steel turning. Which clamping configuration is required for this insert? The insert uses a central cylindrical hole with a single‑side countersink (40°–60°); it is intended to be secured with standard screws and clamping sets that match the ISO CPMT090308 pocket. Can this insert be used for roughing operations? The GT9530 grade is optimised for finishing to light universal turning; for heavy roughing an alternative grade with higher toughness is recommended to withstand larger cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-precision finishing, low cutting forces and ISO compatibility for consistent part quality and reduced cycle times; order the insert directly via Metav Werkzeuge or consult the team for application support. CPMT090308 NS9530 Tungaloy indexable turning insert — uncoated cermet, 0.8 mm corner radius A CPMT090308 NS9530 Tungaloy indexable insert designed for precision external and internal turning of steel, optimised for fine finishing and continuous cuts. Uncoated cermet grade NS9530 Sharp edge for superior surface finish 0.8 mm corner radius for fine turning ISO CPMT rhombic form, 11° clearance Superior finishing performance for steel components The NS9530 grade is an uncoated cermet designed specifically as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces. This combination reduces workpiece deformation and enables consistently high surface finish, particularly in continuous cuts and shallow depths of cut. For machining where visual quality and dimensional tolerance matter, this geometry and grade minimise the need for secondary finishing operations. Geometry and holder compatibility that simplify integration The rhombic CPMT form (ISO 090308) with an included angle of 80°, 0.8 mm corner radius and 11° clearance ensures reliable seating and predictable contact with the toolholder. The insert thickness of 3.18 mm and the cylindrical hole with a single-side countersink (40°–60°) provide standardised clamping interfaces; compatibility with a chosen holder depends on form, clearance angle, tolerance class, fixing method, size and thickness. These standard features make retrofitting into existing ISO tooling systems straightforward and maintainable. Process advantages and practical recommendations Using a finishing cermet like this indexable insert offers reduced cutting forces, improved edge stability and enhanced wear resistance under continuous finishing conditions. The single-sided chipbreaker supports controlled chip flow for fine feeds; select the chipbreaker and grade to match the workpiece material and machining stability. For small depths of cut and smooth passes, maintain steady feed and avoid abrupt entry angles to preserve edge life and part quality. For application guidance or material-specific recommendations, consult Metav Werkzeuge for tailored cutting data and selection advice. For precision finishing with Tungaloy’s NS9530 cermet inserts, contact Metav Werkzeuge for application support and supply enquiries at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998451 Manufacturer SKU: TUN6998451 SKU: 6998451-Tungaloy Model series: ISO turning inserts Designation: CPMT090308 NS9530 Manufacturer: Tungaloy Core specifications Size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Hole style: with hole — cylindrical hole + single-side countersink (40°–60°) Special features Material: cemented carbide (Hartmetall) Grade: NS9530 — uncoated cermet finishing grade Chipbreaker: single-sided Application: turning — external and internal finishing of steel ISO rhombic CPMT form, compatible with ISO holders as per form and dimensions FAQ What machining tasks is this insert best suited for? This insert is optimised for finishing operations on steel; the NS9530 uncoated cermet grade on the CPMT090308 geometry suits continuous cuts and small depths of cut for high surface quality. Can the CPMT090308 NS9530 be used for internal turning as well as external turning? Yes, the rhombic CPMT form and the 0.8 mm corner radius allow the insert to be used for both external and internal turning where the holder and turning bar accept ISO CPMT inserts. What are the key geometry features to check for holder compatibility? Verify form, clearance angle (11°), tolerance class, fixing method, size (09) and thickness (3.18 mm) to ensure the insert correctly fits the intended toolholder. How does the uncoated cermet grade affect tool life and surface finish? The uncoated NS9530 cermet provides a sharp cutting edge and low cutting forces, giving excellent surface finishes; tool life is optimised for finishing conditions and may be shorter under heavy interrupted cuts. Which SKU identifies this exact insert for ordering? The insert is listed as CPMT090308 NS9530 by Tungaloy with SKU 6998451-Tungaloy (manufacturer article number 6998451). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, a 0.8 mm corner radius and ISO conformity for reliable finishing operations; order the insert directly via Metav Werkzeuge or consult our specialists if clarification is required. CPMT090308 NS9530 Tungaloy — CPMT 090308 ISO turning insert for finishing, 0.8 mm corner radius CPMT090308 NS9530 Tungaloy is a rhombic indexable insert designed for precision external and internal turning in finishing applications on steel Cermet finishing grade NS9530 Sharp cutting edge for high surface finish 0.8 mm corner radius for fine profiles 11° clearance angle; ISO rhombic form Consistent finishing quality with a low-force cermet grade The uncoated cermet grade NS9530 is tailored for finishing operations on steel, offering a sharp cutting edge that reduces cutting forces and improves surface integrity. For continuous cuts and small depths of cut, this composition yields high surface finish and consistent part geometries, reducing the need for secondary smoothing processes. The combination of edge stability and a fine corner radius supports tight tolerances and repeatable results on batches where part appearance and dimensional accuracy are critical. Precision geometry that simplifies holder selection and set-up Built to ISO conventions, the rhombic plate form with a nominal size 09 integrates a defined clearance geometry — 11° free angle and an included angle of 80° — that ensures predictable engagement with matching toolholders. The 0.8 mm corner radius and 3.18 mm thickness deliver a robust seating and predictable strength at the cutting edge. The insert features a cylindrical hole with a one‑side countersink (40°–60°) to secure correct clamp seating and repeatable positioning; compatibility with a given holder is governed by form, clearance, tolerance class, fastening, size and thickness. Shop-floor efficiency and measurable process benefits Adopting this finishing insert can shorten cycle times by reducing downstream rework: the low cutting forces translate into diminished machine load and more stable cutting conditions, while the edge quality lessens the frequency of quality rejections. In practice, the grade's behaviour in finishing passes promotes consistent surface results, which supports throughput improvements and cost control across high-volume or precision-focused turning operations. These performance gains position the insert as a pragmatic component in process optimisation. Practical guidance for integration and tool-system planning When specifying the insert, select a one‑sided chipbreaker that matches the workpiece material and the machining stability available; the single-sided chipbreaker on this plate supports chip control in finishing cuts. The system concept comprises the ISO insert, the matching external holder or boring bar, a locating pad/clamping set and the appropriate clamp screws. For reliable operation, ensure the holder accepts a plate with a 3.18 mm thickness and the described hole/countersink arrangement. For questions on holder matching or chipbreaker choice, technical consultation is recommended to align insert, holder and process parameters. For application-specific advice and procurement of Tungaloy CPMT090308 NS9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability. Technical Data Article number: 6998460 SKU: 6998460-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CPMT090308 NS9530 Facts Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Thickness: 3.18 mm Size designation: 09 Hole style: cylindrical hole + one-side countersink (40°–60°) Special features Uncoated cermet grade NS9530 One-sided chipbreaker Rhombic plate form For external and internal turning (finishing) Compatibility via form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The CPMT090308 NS9530 is a finishing-grade cermet insert optimised for steel, providing low cutting forces and excellent surface finish in continuous finishing cuts. Is this insert coated? The NS9530 variant is an uncoated cermet, selected for its sharp edge and low cutting forces in fine finishing applications. Which machining tasks is it optimised for? This rhombic insert is designed for external and internal turning in finishing passes, particularly where small depths of cut and high surface quality are required. How is holder compatibility ensured? Compatibility depends on matching the insert form, free angle, tolerance class, fastening method, nominal size and thickness; the hole and countersink geometry also require a corresponding clamp arrangement. What are the main process advantages of the NS9530 grade? NS9530 offers a stable cutting edge for improved surface quality, reduced cutting forces and consistent results over repeated finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing capability, ISO compatibility and straightforward tool integration for efficient turning operations. Order the insert directly via Metav Werkzeuge or consult our technical team for selection support. CPMT090308 NS9530 Tungaloy indexable insert for turning — rhombic, 0.8 mm radius The CPMT090308 NS9530 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised as a finishing grade for steel with a sharp uncoated cutting edge. ISO‑standard rhombic shape Sharp edge for finishing operations Uncoated cermet grade NS9530 Cylindrical hole with countersink 40°–60° High‑quality finishing with low cutting forces The insert is specified as an uncoated cermet finishing grade (NS9530) and is engineered to deliver a high surface finish with low cutting forces. Cermet grades combine ceramic and metallic properties to provide a very sharp, wear‑resistant edge that produces less built‑up edge and finer surfaces compared with conventional carbides when used for light to moderate finishing passes. This makes the component particularly suited to continuous cuts and small depths of cut, where smoother surface outcomes reduce downstream grinding and polishing effort and therefore improve overall process efficiency. Consistent fit and simple integration into existing tool systems As an ISO‑standard insert in the CPMT form series, the component ensures reliable compatibility with matched holders and tool posts. Key geometry features — the rhombic shape, 11° clearance angle, 80° included angle, 0.8 mm corner radius and a 3.18 mm plate thickness — allow stable seating and repeatable positioning. The insert is supplied with a cylindrical hole and a single‑sided countersink (40°–60°) for secure fastening; these details reduce setup variability and help maintain consistent cutting geometry across index changes. The precise fit parameters mean fewer trials during tool changeover and lower downtime in production. Efficiency and stability for finishing cycles The single‑sided chipbreaker and the sharp cermet composition are tuned for productive finishing of steel, offering controlled chip formation and predictable cutting behaviour. This contributes to steady process performance during extended runs and supports a positive cost‑benefit through reduced rework and stable machining quality. Selecting the correct chipbreaker and grade for the specific steel alloy and cutting conditions helps to maximise productivity while preserving machine resources. For operations prioritising surface quality and minimal cutting forces, the insert represents a practical choice that aligns technical reliability with economic performance. For finishing tasks where surface quality and consistent performance matter, choose the Tungaloy CPMT090308 NS9530 — contact Metav Werkzeuge for tailored selection advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998458 SKU: 6998458-Tungaloy Manufacturer SKU: TUN6998458 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Core technical data Plate size: 09 Plate thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Special features Grade: NS9530 Cutting material: uncoated cermet Plate form: rhombic Hole: with cylindrical hole and one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning System composition: ISO insert + suitable holder, shim/clamp and replacement screws Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CPMT090308 NS9530 is formulated as a finishing grade for steel and is intended primarily for fine turning operations on steel components. Is the insert coated or uncoated? This Tungaloy indexable insert is an uncoated cermet grade (NS9530), chosen for its sharp cutting edge and ability to produce superior surface finishes. How is the insert fixed to the toolholder? The insert is supplied with a cylindrical hole and a single‑sided countersink (40°–60°); it is secured to a compatible ISO holder using the appropriate clamp or screw in accordance with the tool system specification. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius provides a balance between edge strength and surface finish; it reduces the tendency to chatter compared with a razor edge while still delivering a fine surface on finishing passes. Can this insert be used for internal turning? Yes, the ISO‑standard rhombic form and the NS9530 finishing grade allow the CPMT090308 to be used for both external and internal turning where the geometry and holder clearance are suitable. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090308 T505 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade T505 and ISO‑standard geometry for efficient, repeatable turning of cast iron components; compatibility with the toolholder is ensured by matching form, relief angle and plate thickness. Order through Metav Werkzeuge or consult our technical advisers for application support. CPMT 090308 T505 — CPMT090308 T505 Tungaloy indexable turning insert for Drehen CPMT090308 T505 Tungaloy is an ISO‑standard indexable turning insert designed for economical and reliable machining of cast iron in external and internal turning applications CVD‑coated carbide for cast iron ISO CPMT090308 geometry Single‑sided chipbreaker Cylindrical hole with countersink Higher material removal rates for cast iron with consistent tool life The CVD‑coated carbide grade T505 is tuned for the demands of cast iron machining: the coating improves thermal and abrasive resistance while the substrate maintains edge strength. This combination delivers stable chip formation and improved wear resistance, which translates into fewer insert changes and higher uptime on production runs. For shops seeking a balance between cost and productivity, the economic behaviour of this grade supports longer tool life without sacrificing surface quality. Secure mounting and standardised geometry for repeatable results ISO conformity of the CPMT090308 geometry ensures straightforward selection of compatible holders and simple replacement routines. Critical dimensions such as the 3.18 mm plate thickness, rhombic shape and the 11° relief angle influence seating, chip flow and cutting forces; matching these values with the clamp and tolerance class reduces vibration and improves repeatability. The insert’s cylindrical hole with a one‑sided countersink (40°–60°) gives a reliable clamping interface that supports consistent concentricity and repeatable positioning, especially important in batch production. Practical guidance on chip control and edge geometry for process stability The single‑sided chipbreaker is designed to support controlled chip breaking in stable setups; selecting this chipbreaker and the 0.8 mm corner radius helps achieve the desired balance between surface finish and tool strength. For interrupted cuts or unstable set‑ups, choose a more robust holder and consider a grade and chipbreaker combination matched to workpiece stability. The insert is intended for turning operations where chip evacuation and controlled cutting forces are priorities, enabling efficient machining with predictable results. For technical advice or to purchase the Tungaloy CPMT090308 T505 insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application support and supply coordination Technical data Article number: 6831841 Manufacturer SKU: TUN6831841 Model series: ISO‑Drehwendeschneidplatten Insert designation: CPMT090308 T505 Facts Corner radius: 0.8 mm Insert size: 09 Plate thickness: 3.18 mm Relief angle: 11° Main angle: 80° Special features Material: carbide Coating: CVD‑coated Shape: rhombic Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning FAQ What materials is this insert optimised for? The CPMT090308 T505 insert is optimised for cast iron applications; the T505 grade and CVD coating provide abrasion resistance suited to grey and nodular cast irons. How does the insert attach to a holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for positive clamping; matching the holder to the ISO geometry and tolerance class ensures secure seating and repeatable positioning. Is the chipbreaker suitable for interrupted cuts? The single‑sided chipbreaker on this insert provides controlled chip formation in stable cutting conditions; for aggressive interrupted cuts a different chipbreaker or a more robust setup is recommended. What benefits does the CVD coating deliver? The CVD‑coating increases thermal and abrasive resistance at the cutting edge, which improves tool life and helps maintain a consistent surface finish during extended production runs. Which dimensions are critical when selecting a compatible holder? Key dimensions include the insert shape and size (09), plate thickness (3.18 mm), relief angle (11°) and the hole and countersink geometry; these determine compatibility and clamping stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090308 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide durability and ISO compatibility for efficient cast‑iron turning; order directly via Metav Werkzeuge or consult our advisors for selection support. CPMT 090308 T5115 Tungaloy indexable insert for turning The CPMT090308 T5115 is an ISO‑standard rhombic indexable insert engineered for external and internal turning, optimised for cast‑iron applications. CVD-coated carbide grade T5115 ISO rhombic insert, size 09 Optimised for cast-iron turning 11° clearance angle and 0.8 mm radius Reliable wear resistance for productive turning The combination of CVD‑coated surface treatment and a high‑performance carbide substrate in grade T5115 delivers extended tool life and consistent cutting performance when machining cast‑iron. The coating reduces abrasive wear while the substrate maintains edge stability, so fewer insert changes are required during longer production runs. This translates into lower downtime and a more predictable cost per finished component, particularly in medium to high‑volume turning operations where repeatability matters. ISO geometry for fast, repeatable setup Designed to the ISO series of turning inserts, the rhombic form and size 09 ensure straightforward interchangeability with compatible toolholders. Key geometry values such as 3.18 mm plate thickness, an 11° clearance angle and a 0.8 mm corner radius are specified for reliable seating and consistent cutting engagement. The insert features a cylindrical hole with a single‑sided countersink (40°–60°), enabling secure fastening and repeatable clamping—factors that minimise setup time and reduce variability between tool changes. Controlled chip formation and improved surface quality This grade is supplied with a one‑sided chipbreaker tuned for cast‑iron applications to promote stable chip formation and reduce the risk of built‑up edge. Stable chips help maintain surface integrity and reduce manual chip handling, improving both workplace safety and finished part appearance. For less experienced users, the chipbreaker reduces sensitivity to small deviations in feed or rigidity, producing a reliable surface finish with fewer corrective passes. Practical application scope and selection guidance Suitable for both external and internal turning, this insert performs best where cast‑iron removal and consistent surface quality are priorities. The insert is supplied as part of a system comprising the ISO‑rated insert, a matching external holder or boring bar, and the appropriate underlay/clamp set with replacement screws. Selection should match the chipbreaker and grade to the workpiece, machining method and machine rigidity to achieve the best balance between tool life and productivity. Metav Werkzeuge’s technical team can advise on holder compatibility and the correct tolerance class for specific setups. For assured performance in cast‑iron turning with Tungaloy quality, contact Metav Werkzeuge for availability and tailored selection advice. Technical data Article number: 6864712 Manufacturer SKU: TUN6864712 SKU: 6864712-Tungaloy Label: CPMT090308 T5115 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: carbide WPL designation: CPMT090308 Grade/coating: T5115 / CVD-coated carbide Facts Corner radius: 0.8 mm Included angle: 80° Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 09 Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic plate form One-sided chipbreaker Universal grade for cast iron ISO-standardised insert Compatible with external holder or boring bar System components: underlay/clamp set and replacement screws Typical application: external and internal turning Schneidstofftyp: CVD-coated carbide (T5115) FAQ What materials is this insert best suited for? The CPMT090308 T5115 insert is a universal grade optimised for machining cast iron and provides a balance of wear resistance and edge stability for such materials. How does the CVD coating benefit tool life? A CVD‑coated carbide insert like the T5115 improves abrasive wear resistance and helps maintain edge integrity, extending the service life under typical turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert is intended for ISO‑compliant external holders or boring bars. What chip control can be expected with the included chipbreaker? The one‑sided chipbreaker is designed to promote stable chip formation and consistent surface finish when turning cast iron, reducing the likelihood of built‑up edge and erratic chips. Is this insert suitable for both external and internal turning operations? Yes, the geometry and mounting options make the insert suitable for both external and internal turning when paired with the appropriate holder and clamping accessories. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO-compatible geometry and effective chip control for consistent turning of stainless steels. Order the CPMT090308 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 090308 T6215 Turning insert — Tungaloy The CPMT090308 T6215 is an ISO-standard rhombic turning insert designed for reliable external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. ISO rhombic insert CPMT 090308 CVD-coated carbide grade T6215 Single-sided chipbreaker for stable chips With hole and single-side countersink Improved tool life and consistent surface results The CVD-coated carbide T6215 grade offers enhanced wear resistance and temperature tolerance, which translates into extended cutting edge life and fewer tool changes. For machining stainless steels, the coating reduces flank wear and helps maintain a consistent surface finish even during prolonged runs. CVD (chemical vapour deposition) layers form a hard outer film that protects the substrate carbide while preserving edge precision; this means fewer interruptions, lower tooling costs per component and stable process windows in series production. Predictable fit and secure clamping in ISO systems Designed to the ISO turning insert family, the rhombic geometry and standardised dimensions ensure predictable compatibility with matched holders. Key geometry features such as the 11° relief, 80° included angle and 3.18 mm plate thickness combine to give a rigid cutting edge and reliable seating in the clamping system. The insert’s hole—cylindrical with a single-side countersink (40°–60°)—provides secure fixing and repeatable positioning. These characteristics simplify holder selection and reduce setup variability in the machine shop. Chip control and process stability on the shop floor The single-sided chipbreaker is tuned for stable to lightly interrupted cuts, promoting controlled chip formation when turning stainless steels. Effective chip control reduces risk of surface damage and tool re-cutting, shortening cycle times and lowering scrap rates. The moderate corner radius (0.8 mm) balances edge strength with the ability to produce fine surface finishes. For varied workpiece conditions, pairing the insert’s chipbreaker and grade with a suitable holder and cutting parameters leads to measurable productivity gains and consistent component quality. Discuss Tungaloy's CVD-coated CPMT090308 insert with Metav Werkzeuge for tailored recommendations and rapid supply. Technical data Article number: 6876409 Manufacturer SKU: TUN6876409 SKU: 6876409-Tungaloy Model series: ISO turning inserts Designation: CPMT090308 Manufacturer: Tungaloy Dimensions & angles Corner radius: 0.8 mm Thickness: 3.18 mm Size designation: 09 Relief angle: 11° Included angle: 80° Hole: with hole; cylindrical hole + single-side countersink 40°–60° Materials & features Carbide, CVD-coated (grade T6215) Single-sided chipbreaker Rhombic insert form Intended application: Turning; suitable for stainless steels under stable to slightly interrupted cuts ISO-compatible design FAQ Which materials is this insert intended for? The CPMT090308 T6215 insert is optimised for machining stainless steels, offering wear resistance and thermal stability for stable turning operations. What does the CVD coating provide in practice? A CVD-coated surface on the insert reduces flank wear, improves heat resistance and helps maintain cutting-edge geometry, resulting in longer tool life and steadier surface quality for the CPMT090308 T6215. How does the insert ensure compatibility with holders? Compatibility is achieved through the ISO-standard geometry: the rhombic form, 11° relief, standard size designation and the specified thickness ensure predictable seating and clamping with matching external holders and boring bars. Can the insert handle interrupted cuts or heavy cuts? The single-sided chipbreaker is aimed at stable to slightly interrupted cuts; for heavy or highly interrupted machining, selection of a different chipbreaker or tool grade may be preferable. What are the manufacturer references for ordering? Manufacturer article number 6876409 and the manufacturer SKU TUN6876409 identify the CPMT090308 T6215 insert for procurement and ordering purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, 80° rhombic geometry and a 0.8 mm corner radius for reliable turning of stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 090308 T6215 – Turning insert, 80° rhombic, CVD-coated (Tungaloy) The CPMT 090308 T6215 is an ISO rhombic indexable insert designed for external and internal turning, providing wear-resistant cutting performance for stainless steels under stable to lightly interrupted conditions. CVD-coated cemented carbide grade T6215 80° rhombic geometry for sturdy cutting Single-sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Consistent tool life through advanced coating and grade selection The combination of a CVD-coated cemented carbide substrate and the T6215 grade provides improved wear resistance and predictable performance in serial production. The CVD coating reduces flank wear and helps maintain dimensional stability over longer cutting times, which leads to fewer tool changes and reduced downtime. For operations where process stability is key, this material pairing supports higher productivity and repeatable component quality while simplifying grade selection for turning applications. Secure clamping and robust geometry for heavy cuts Featuring an 80° rhombic geometry, the insert offers a balanced edge angle that supports stable cutting forces and good resistance to edge chipping. The form, combined with the 0.8 mm corner radius, increases the contact area at entry, improving edge strength for interrupted cuts and medium-depth passes. This geometry is particularly advantageous when paired with a correctly matched insert holder and clamping set, since compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Improved chip control and surface finish for stainless steels The insert’s single-sided chipbreaker is optimised for chip formation when machining corrosion-resistant alloys, helping to produce short, manageable chips and reducing the risk of surface damage. By selecting the right chipbreaker and machining parameters, the cutting edge maintains its profile longer and supports consistent surface integrity, which is essential when working with work-hardenable materials. The design supports finishing and semi-finishing passes where a predictable chip flow and stable cutting forces contribute directly to better part quality. System compatibility and practical workshop benefits As an ISO-standard turning plate, the insert integrates into a modular system consisting of a matching external holder or boring bar, a backing/clamp kit and replacement screws. The CPMT 090308 format with a cylindrical hole and one-sided countersink (40°–60°) simplifies secure fastening and repeatable positioning. Using widely recognised ISO designations makes tool inventory management easier and helps ensure replacement inserts fit known holders without adaptation. Application guidance and technical support For turning applications, select the chipbreaker and grade according to workpiece material, cutting depth and machine stability. The CVD-coated T6215 grade is particularly suited for turning stainless steels under stable conditions; for heavily interrupted cuts or extremely high temperatures, alternative grades or coolant strategies may be considered. If further technical data or cutting parameter recommendations are required, Metav Werkzeuge provides detailed advice and application support via the contacts below. For tailored technical advice or to order original Tungaloy CPMT 090308 T6215 turning inserts, contact Metav Werkzeuge for specification support and prompt supply Technical data Article number: 6876411 Manufacturer SKU: TUN6876411 SKU: 6876411-Tungaloy ISO designation: CPMT090308 Grade: T6215 Facts Corner radius: 0.8 mm Insert angle: 80° Clearance (rake) angle: 11° Thickness: 3.18 mm Insert size: 09 Special features Material: CVD-coated cemented carbide Insert form: rhombic Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink (40°–60°) Typical application: external and internal turning of stainless steels System components: insert, matching holder/boring bar, backing/clamp set, spare screws FAQ What materials is this insert best suited for? The CPMT 090308 T6215 insert is designed primarily for machining stainless steels; the CVD-coated cemented carbide and chipbreaker support wear resistance and controlled chips in such alloys. How does the 80° geometry affect cutting performance? An 80° rhombic geometry increases edge strength and supports stable cutting forces, which helps prevent chipping during interrupted cuts and provides reliable performance in turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CPMT 090308 fits holders made for the CPMT ISO family when those parameters match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215 and an 80° rhombic geometry for steady, productive turning of rostfreier Stahl; the robust insert ensures consistent chip control and reliable edge life. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and application-specific advice. CPMT 090308 T6215 — Tungaloy ISO turning insert for rostfreier Stahl, rhombic 80° CPMT 090308 T6215 is an ISO‑compliant turning insert optimised for external and internal turning, delivering wear resistance and stable cutting under steady to mildly interrupted conditions CVD-coated carbide grade T6215 80° rhombic geometry for stable cuts 0.8 mm corner radius for versatile finishing Single-sided chipbreaker with central hole Reliable performance where consistent surface finish matters The combination of a CVD-coated surface and the T6215 composition delivers measurable improvements in tool life when machining rostfreier Stahl. A CVD coating increases surface hardness and thermal resistance, which reduces flank wear during sustained operations; this translates directly into longer periods between index changes and more predictable production cycles. The carbide substrate provides the toughness required for light interruptions, ensuring that the cutting edge maintains form even in mixed batch production. As a result, cycle times can be stabilised and process planning becomes more economical. Precise geometry for controlled chip formation and surface quality The 80° rhombic shape, 0.8 mm corner radius and single-sided chipbreaker are designed to balance robustness and finish capability. The geometry supports secure cutting forces for turning applications while the chipbreaker manages swarf flow, reducing rework and handling time. A clearance angle of 11° contributes to steady cutting action and reduced rubbing, supporting improved surface integrity on turned components. This set of features benefits operations that require consistent dimensional accuracy and repeatable finishes. Simple integration into ISO toolholder systems Compatibility is ensured through standardised form, clearance angle, tolerance class, clamping method, size and thickness — all crucial for a secure fit within ISO toolholders. The insert’s rhombic form and central hole with a one‑sided countersink enable reliable clamping and repeatable positioning, minimising set‑up time and vibration risk. Specifying the correct insert variant reduces trial-and-error during tool selection and helps maintain process reliability across different machines and holders. Durability and application focus for efficient turning With a 3.18 mm plate thickness and a wear‑resistant grade tuned for rostfreier Stahl, the design focuses on productivity and predictable running behaviour. The material pairing and chip control reduce the likelihood of premature edge failure and support higher material removal rates where appropriate. For production environments seeking a balance of longevity and surface quality, this insert provides a cost‑effective solution by extending index life and lowering unscheduled tool interventions. For selection advice on the Tungaloy CPMT 090308 T6215 insert and to confirm holder compatibility, contact Metav Werkzeuge for technical consultation and availability at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists will advise on the optimum grade and chipbreaker for the specific rostfreier Stahl grade. Technical data Article number: 6876413 Manufacturer SKU: TUN6876413 Our SKU: 6876413-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T6215, CVD-coated Dimensions & core data Insert designation: CPMT090308 (ISO 090308) Insert size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Features & application notes Rhombic plate form, 80° cutting angle Single-sided chipbreaker Wear-resistant grade for rostfreier Stahl under stable to mildly interrupted conditions Compatibility determined by form, clearance, tolerance, clamping, size and thickness Intended use: Turning (external and internal) FAQ What materials is this insert suitable for? The CPMT 090308 T6215 insert is formulated for machining rostfreier Stahl and performs under stable to lightly interrupted cutting conditions. How does the T6215 grade improve tool life? The T6215 composition, combined with a CVD coating on the CPMT 090308 insert, increases thermal resistance and surface hardness, which reduces wear and extends the useful edge life in continuous turning operations. Which geometry and features support chip control? The rhombic 80° form with a single-sided chipbreaker and central hole provides secure clamping and consistent chip formation, improving swarf evacuation and surface finish when using the insert. Is the insert compatible with standard ISO holders? Yes; the CPMT 090308 insert follows ISO norms — compatibility depends on matching form, clearance angle, tolerance class, clamping method, size and thickness to the holder. What cutting data should be considered for rostfreier Stahl? Cutting speeds and feeds should be selected based on rostfreier Stahl grade and machine rigidity; the CPMT 090308 T6215 insert favours stable parameters that exploit its wear resistance and chip control for repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, breakage safety and full ISO compatibility for productive turning operations; order the CPMT090308 T9215 insert directly via Metav Werkzeuge or consult the technical team for application support. CPMT 090308 T9215 — ISO turning insert for turning, Tungaloy The CPMT090308 T9215 is an ISO rhombic turning insert engineered for medium steel machining, offering a one-sided chipbreaker and secure mounting for continuous to slightly interrupted cuts CVD-coated carbide grade T9215 Rhombic 09 insert, 80° lead angle 0.8 mm corner radius, 3.18 mm thickness One-sided chipbreaker with cylindrical hole and countersink Increased productivity through wear-resistant coating The combination of a CVD-coated surface and carbide substrate provides improved tool life and consistent cutting performance in medium steel applications. The T9215 grade is formulated to balance high wear resistance with sufficient toughness to reduce catastrophic edge failure, which translates into longer tool cycles and fewer insert changes on the machine. For process planners this means more predictable uptime and a reduced frequency of tool change interventions, improving overall shop-floor efficiency. Secure clamping and ISO-based compatibility for consistent results Designed as an ISO-normed insert, the geometry of this rhombic cutting edge ensures compatibility with standard holders when the form, 11° relief, tolerance class, fixing method, size and thickness are matched. The 80° lead angle and cylindrical hole + single-sided countersink (40°–60°) ensure a reliable seat and precise clamping torque when combined with the correct underlay, clamping set and screws. This mechanical certainty reduces vibration risk and supports repeatable part quality across production batches. Practical selection guidance for turning applications The one-sided chipbreaker is optimised for medium-stability setups and delivers controlled chip formation and evacuation, improving surface finish and reducing the likelihood of chip entanglement. Choose this insert when machining medium steel under continuous to slightly interrupted cuts, and pair with a suitable holder and feed/speed strategy to exploit the grade's productivity advantages. For complex or mixed-material programmes, technical consultation is advised to select matching chipbreaker shapes and cutting parameters. For tailored recommendations on the Tungaloy CPMT090308 T9215 and immediate availability, contact Metav Werkzeuge's technical sales team via info@metav-werkzeuge.com or call +49 2822 7131930 to secure the appropriate inserts for the specific turning application Technical Data Article number: 6774038 Manufacturer SKU: TUN6774038 Brand: Tungaloy Model series: ISO turning inserts Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Lead/approach angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features CVD-coated carbide grade T9215 One-sided chipbreaker Rhombic insert form Application: turning Typical use: medium steel machining System: matching holder/boring bar, clamping pad and screws Compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suited for? The CPMT090308 T9215 insert from Tungaloy is primarily specified for medium steel machining, offering wear resistance and toughness for continuous to slightly interrupted cuts. How is holder compatibility ensured for this insert? Compatibility depends on matching the insert form, 11° relief, tolerance class, fixing method, size (09) and thickness (3.18 mm); when these match the holder or boring bar, secure clamping and repeatable positioning are achieved. What advantage does the one-sided chipbreaker provide? A one-sided chipbreaker promotes controlled chip formation and evacuation in turning operations, improving surface finish and reducing the risk of chip-related interruptions during medium-stability cutting. How does the T9215 grade perform under production conditions? The T9215 CVD-coated carbide grade combines high wear resistance with breakage safety, making it suitable for productive runs where a balance between tool life and edge security is required. Which mounting details are important when fitting the insert? Note the cylindrical hole with single-sided countersink (40°–60°) and ensure correct clamping components and the specified screw set are used to maintain stable seating and cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and a precise 0.8 mm corner radius for stable chip control and consistent surface finishes; order the CPMT090308 T9215 turning insert directly via Metav Werkzeuge or request application advice from our consultants. CPMT 090308 T9215 turning insert — Tungaloy CPMT 090308 T9215 is a rhombic ISO indexable insert designed for productive external and internal turning of mid-range steels CVD-coated carbide for improved tool life One-sided chipbreaker for consistent chips Rhombic 09 shape, 80° included angle Cylindrical hole with countersink 40°–60° Maximised productivity for steel turning The insert is built around a CVD-coated carbide grade optimised for steady mid-range steel machining, delivering a balance of wear resistance and fracture toughness. This combination reduces unplanned tool changes and supports higher material removal rates under continuous or slightly interrupted cuts. The supplied geometry, including the 11° clearance angle, translates into stable cutting conditions and reproducible part quality even on longer production runs. Robust geometry for predictable surface quality With a 0.8 mm corner radius and an 80° included angle, the cutting edge offers a compromise between edge strength and the ability to maintain tight dimensional tolerances. The one-sided chipbreaker promotes uniform chip formation, simplifying chip handling and reducing the risk of workpiece damage. These features improve process reliability and help achieve consistent surface finish targets with fewer grinding or rework cycles. Practical mounting and compatibility guidance The insert follows ISO indexable insert conventions; compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening, size and thickness. The rhombic 09 form and 3.18 mm thickness suit standard ISO turning holders that accept a cylindrical central hole with a single-side countersink (40°–60°). Selecting the correct clamping and tightening sequence ensures optimal seat contact and repeatable positioning for index changes. Application-focused benefits and lifecycle considerations Designed as a first choice for mid-range steel operations, the grade supports continuous production with good flank wear resistance and robust chipping behaviour. The T9215 coating reduces crater wear and extends usable tool life, contributing to lower overall tooling costs per part. For shops seeking straightforward indexable solutions, the insert offers a clear path to productivity gains without the need for complex process adjustments. Contact Metav Werkzeuge for tailored application recommendations and to reserve CPMT 090308 T9215 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774025 Manufacturer SKU: TUN6774025 SKU: 6774025-Tungaloy Type designation: CPMT090308 Model series: ISO turning inserts Material: Carbide Numbers Corner radius: 0.8 mm Clearance angle: 11° Thickness: 3.18 mm Insert size: 09 Included angle: 80° Special features Coating/sort: T9215 (CVD-coated carbide) Chipbreaker: one-sided Hole: cylindrical with single-side countersink 40°–60° Shape: Rhombic Typical use: external and internal turning, mid-range steel machining FAQ What materials is this insert best suited for? The CPMT 090308 T9215 turning insert is optimised for mid-range steel machining, where the CVD-coated carbide provides a balance of wear resistance and fracture toughness. How does the chipbreaker affect performance? The one-sided chipbreaker on the insert promotes uniform chips and improves chip control, supporting continuous cutting and reducing the risk of chip-related surface damage. Which toolholders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; holders accepting a rhombic 09 insert with a cylindrical hole and single-side countersink will fit the CPMT 090308 design. What are the key geometry specs to consider for process setup? Important numbers are the 0.8 mm corner radius, 11° clearance angle and 3.18 mm plate thickness — these influence edge strength, cutting forces and clamping requirements for the insert (SKU 6774025-Tungaloy). Does the T9215 grade support interrupted cuts? The T9215 grade combines good wear resistance with fracture toughness and is suitable for continuous to slightly interrupted cuts in mid-range steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9225 grade with the ISO CPMT090308 geometry delivers reliable performance and extended tool life in medium to heavy steel turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching and holder compatibility. CPMT 090308 T9225 turning insert (ISO CPMT090308) — CVD-coated carbide, 0.8 mm corner radius (Tungaloy) CPMT090308 T9225 is an ISO-format turning insert for general-purpose and heavy-duty steel turning, designed for use in compatible external and internal turning holders CVD-coated carbide grade T9225 Robust for medium to heavy steel turning Rhombic ISO geometry 09, 80° included angle 0.8 mm corner radius, single-sided chipbreaker Consistent cutting performance under varying engagement The combination of a CVD-coated carbide substrate and the T9225 grade provides a balance of hardness and toughness that suits interrupted cuts and changing engagement conditions. The coating supports elevated temperatures and abrasion resistance, while the base material supplies the toughness needed for heavier depths of cut. This leads to more stable cutting forces and reduced risk of premature edge failure, which in turn maintains component quality and reduces rework. Fast integration and predictable set-up through ISO conformity The ISO designation and the clear geometry codes enable quick selection and straightforward insertion into standard tooling systems. The ISO CPMT090308 form, the rhombic 09 size and the defined 11° relief angle mean that fitment and repeatability are improved, shortening set-up time and supporting consistent process windows. Compatibility is determined by form, relief angle, tolerance class, fixation, size and thickness, so technicians can verify holder match rapidly and resume production with confidence. Reliable chip control and durability for heavier cuts A single-sided chipbreaker matched to the plate geometry gives controlled chip evacuation in many steel grades, lowering the chance of chip entanglement and improving surface finish. The insert’s 0.8 mm corner radius and 3.18 mm thickness contribute to a robust edge that resists chipping under higher radial loads. For shops facing mixed lot sizes or variable stability, this insert helps sustain tool life and delivers repeatable results across batches. Practical application guidance and material scope Engineered primarily for turning, the insert is suitable for both external and internal operations when paired with an appropriate holder and clamping set. Select the chipbreaker and grade according to workpiece material, cutting strategy and machine rigidity. The geometry includes a cylindrical hole with one-sided countersink (40°–60°) for positive clamping; ensure the chosen holder corresponds to the ISO form and thickness for accurate seating and torque distribution. Contact Metav Werkzeuge for tailored advice and to arrange supply of the Tungaloy CPMT090308 T9225 turning insert; our technicians can confirm holder compatibility and application parameters — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: 6781023 SKU: 6781023-Tungaloy Manufacturer SKU: TUN6781023 Model series: ISO turning indexable inserts Product name: CPMT090308 T9225 Facts Corner radius: 0.8 mm Plate thickness: 3.18 mm Relief angle: 11° Included angle: 80° Plate size: 09 ISO designation: 090308 Special features Material: carbide Coating: CVD-coated Grade: T9225 (robust universal for medium to heavy steel) Plate form: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What workpiece materials is this insert suitable for? The CPMT090308 T9225 turning insert is formulated for steel machining and excels in medium to heavy steel turning; the T9225 grade offers toughness for interrupted cuts and variable engagements. How does the T9225 grade differ from super-hard finishing grades? T9225 is a robust universal grade prioritising toughness and wear resistance for heavier cuts, whereas finishing grades focus on maximum hardness and surface finish at lower cutting forces. Which holders are compatible with the CPMT090308 geometry? Compatible holders are those designed for ISO rhombic inserts size 09 with CPMT form and matching 11° relief, correct tolerance class and clamping features for a cylindrical hole with countersink. Is the insert suitable for interrupted cuts and unstable set-ups? Yes, the CVD-coated carbide substrate combined with the T9225 grade enhances resistance to impact and thermal fluctuation, making it appropriate for applications with occasional interruptions. What is the manufacturer article number and identification? The manufacturer article number is 6781023 and the product is listed as CPMT090308 T9225 (SKU: 6781023-Tungaloy) from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.8 mm corner radius for reliable edge strength, and straightforward compatibility with ISO toolholders; order the CPMT090308 T9225 indexable insert directly via Metav Werkzeuge or contact the technical team for application advice. CPMT 090308 T9225 indexable insert — ISO-standard turning insert by Tungaloy CPMT090308 T9225 is an ISO-standard rhombic indexable insert designed for medium to heavy steel turning in external and internal operations CVD-coated carbide grade T9225 Universal use for medium to heavy steel turning ISO rhombic insert with 11° relief angle Consistent cutting performance under variable conditions The CVD-coated carbide grade T9225 is formulated as a robust universal grade for the mid-to-heavy duty turning of steel, offering increased toughness where interrupted cuts or changing engagement conditions occur. As an ISO-standard indexable insert, this grade combines wear resistance with fracture resistance, so chip formation remains stable and tool life is extended. The combination of the single-sided chipbreaker and the geometry chosen reduces cutting forces and supports consistent surface finish without complex process tuning. Geometry and clamping for reliable toolholder compatibility The rhombic plate form with a cylindrical hole and one-sided countersink (40°–60°) ensures straightforward clamping in a wide range of ISO holders. Compatibility is determined by form, relief angle, tolerance class, attachment, size and thickness; the specified 11° relief angle and 3.18 mm thickness make this insert suitable for stable, repeatable positioning in standard external and internal turning holders. The corner radius 0.8 mm provides a balance between edge strength and achievable contour detail, reducing the risk of corner chipping in tougher cuts. Operational efficiency and typical applications As a purpose-made turning grade, the insert is intended for typical lathe operations where economy and process reliability matter. The T9225 grade performs well in fluctuating cutting conditions common in batch and job-shop production, enabling longer intervals between indexings and fewer tool changes. Its single-sided chip control assists in predictable swarf evacuation, lowering machine downtime and simplifying process planning for steel turning tasks — especially where a combination of surface quality and robustness is required. Contact Metav Werkzeuge for availability and tailored application advice — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Item number: 6781131 Manufacturer SKU: TUN6781131 Supplier SKU: 6781131-Tungaloy Designation: CPMT090308 T9225 Tungaloy indexable insert Core data Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Main angle: 80° Insert size: 09 Special features Rhombic plate form With hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker CVD-coated carbide, grade T9225 Application: turning (external and internal) ISO-standard indexable insert FAQ What materials is this insert suited for? The CPMT090308 T9225 indexable insert is specified for medium to heavy steel turning; the CVD-coated carbide grade T9225 provides toughness for interrupted cuts and variable engagement in steel machining. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, attachment method, size and thickness. The rhombic form, 11° relief angle and 3.18 mm thickness align with common ISO toolholder standards for turning. Does the insert support internal turning as well as external turning? Yes — the ISO rhombic geometry and the clamping hole with countersink enable use in holders intended for both external and internal turning operations. What purpose does the single-sided chipbreaker serve? The single-sided chipbreaker promotes consistent chip formation and evacuation in typical turning conditions, contributing to stable cutting performance and reduced risk of swarf-related interruptions. Are special clamping screws or adapters required? Standard clamping systems for ISO indexable turning inserts are compatible; the cylindrical hole and one-sided countersink (40°–60°) suit conventional insert fastening arrangements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 T9225 Wendeplatten - Tungaloy
Combining the CVD‑coated cemented carbide grade T9225, an 0.8 mm corner radius and an 11° relief angle delivers robust performance for medium to heavy steel turning and stable chip control under variable engagement; order the insert directly via Metav Werkzeuge or consult the technical team for tailored recommendations. CPMT 090308 T9225 — Turning ISO insert, CVD‑coated carbide (Tungaloy) The CPMT090308 T9225 is an ISO‑standard rhombic indexable insert for turning, engineered as a robust universal grade for external and internal machining where interrupted cuts or varying engagement demand extra toughness. ISO rhombic insert 09, 80° geometry CVD-coated carbide grade T9225 Single-sided chipbreaker for steel turning Cylindrical hole with 40°–60° countersink Enhanced wear resistance and predictable chip formation The combination of a CVD‑coated surface and cemented carbide substrate provides a reliable balance between hardness and toughness. The T9225 grade is formulated for productive turning of medium to heavy steel, so the insert sustains edge integrity under fluctuating loads and partially interrupted cuts. Stable chip formation reduces the risk of built‑up edge and contributes to consistent surface finish. As a result, machining cycles become more predictable and tool change frequency can be reduced, improving uptime in production environments. ISO compliance ensures repeatable clamping and fit Designed to ISO dimensions, the rhombic 09 geometry and 80° approach angle guarantee compatibility with common external holders and boring bars. The 11° relief angle and the standardised tolerance class ensure secure seating and repeatable positioning, while the cylindrical hole with single‑side countersink (40°–60°) enhances clamping stability in the tooling system. This standardisation supports quick insert replacement and maintains concentricity, which is particularly important when multiple assemblies must deliver identical parts batch after batch. Productivity gains through longer tool life and process stability Selecting a robust universal grade like T9225 helps to extend tool life under demanding feed and depth conditions, thereby lowering tool consumption and associated downtime. The single‑sided chipbreaker tailored for steel turning promotes controlled chip evacuation, enabling higher cutting speeds and more consistent cycle times. In practice, this means fewer interruptions for cleaning and a smoother flow through the production line — an economic advantage that becomes significant over many components. Geometry choices for surface finish and strength The 0.8 mm corner radius offers a practical compromise between strength and finish: large enough to withstand roughing forces yet small enough to achieve a good surface quality during finishing passes. For heavy cuts or highly interrupted work, pairing the insert with a more robust holder and an appropriate clamping set improves stability further. When choosing the chipbreaker and holder combination, attention to workpiece material and machining strategy will optimise both component accuracy and tool performance, making the system more forgiving under shop‑floor variability. For reliable medium‑to‑heavy steel turning with the proven Tungaloy quality, order the CPMT090308 T9225 indexable insert through Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and availability Technical data Article number: 6781090 SKU: 6781090-Tungaloy Manufacturer SKU: TUN6781090 Designation: CPMT090308 Model series: ISO turning indexable inserts Material: cemented carbide Grade: T9225 Application: Turning Facts Corner radius: 0.8 mm Relief angle: 11° Insert size: 09 Thickness: 3.18 mm Geometry angle: 80° Hole: with hole Special features CVD coating Single-sided chipbreaker Rhombic shape Cylindrical hole with single-sided countersink (40°–60°) Robust universal grade for medium to heavy steel ISO-compliant fit to holders FAQ What materials is this insert suited for? The CPMT090308 T9225 indexable insert from Tungaloy is optimised for medium to heavy steel machining and performs well under variable cutting conditions and interrupted cuts. How does the insert attach to holders and ensure repeatability? Compatibility is determined by form, relief angle, tolerance class and size; the ISO dimensions, cylindrical hole with countersink and standardised thickness enable secure clamping and repeatable seating in ISO‑compliant holders. Which cutting situations benefit most from the T9225 grade? The T9225 grade is intended for demanding turning operations where toughness and wear resistance are needed simultaneously — for example, roughing heavy cross‑sections, interrupted cuts or unstable engagement scenarios. How does the chipbreaker affect performance and finish? The single‑sided chipbreaker promotes controlled chip flow during steel turning, which helps to keep the cutting zone clear and supports consistent surface quality while reducing the likelihood of built‑up edge. What role does the 0.8 mm corner radius play in surface quality? A 0.8 mm corner radius provides increased edge strength for heavier passes while still allowing for acceptable surface finish in follow‑up finishing passes; choice of feed and depth of cut will determine final surface characteristics. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and ISO compatibility for consistent medium to heavy steel turning; the combination of a 0.8 mm corner radius and a 3.18 mm plate thickness delivers reliable edge strength and stable chip control. Order directly via Metav Werkzeuge or consult our technical team for application recommendations. CPMT 090308 T9225 Tungaloy – indexable turning insert, CVD-coated carbide, rhombic 09 The CPMT090308 T9225 Tungaloy indexable insert is designed for ISO-standard turning applications, offering a durable CVD-coated carbide grade for medium to heavy steel machining. CVD-coated carbide for durable performance Robust for medium to heavy steel turning Rhombic 09 form, 11° rake angle Cylindrical hole with single-sided countersink (40°–60°) Engineered for dependable performance in steel turning The insert uses the T9225 CVD-coated carbide grade to combine toughness with wear resistance, making it suited to medium to heavy steel turning where variable engagement or slightly interrupted cuts occur. The 0.8 mm corner radius enhances edge strength and reduces the likelihood of premature chipping, while the single-sided chipbreaker geometry promotes consistent chip formation. This results in fewer unplanned tool changes and a more predictable process, which supports higher uptime and efficient cycle planning. ISO compatibility and secure clamping for repeatable results Manufactured to ISO dimensions, the indexable insert ensures compatibility with appropriately specified toolholders. Compatibility depends on the insert form, 11° relief (rake) angle, tolerance class, size and thickness; correct matching guarantees stable seating and clamping. The cylindrical hole with single-sided countersink (40°–60°) provides precise axial location and reliable torque transfer to the holder, reducing micro-movements and enabling repeatable positioning for series production. Design choices that aid productivity and surface quality The rhombic 09 form and a plate thickness of 3.18 mm balance rigidity and accessibility for turning profiles. A well-chosen corner radius combined with the CVD coating reduces flank wear and helps maintain consistent surface finish over longer tool life. By selecting this insert grade for appropriate steel workpieces, machining programmes can be optimised for fewer interruptions and improved overall efficiency, supporting cost-effective production schedules. Practical guidance for selection and setup This ISO insert is primarily intended for turning applications on steel workpieces; choose the chipbreaker and grade to match the workpiece material and stability of the setup. The insert is supplied in the ISO-Drehwendeschneidplatten series and forms part of a system that includes a matching external holder or boring bar, shim/locking set and replacement screws. If uncertainty exists about holder compatibility or the best grade for a specific job, our technical advisers can clarify application parameters and help specify the correct assembly for reliable machining. For reliable mid-to-heavy steel turning using the T9225 grade, contact Metav Werkzeuge for swift supply and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781063 SKU: 6781063-Tungaloy Manufacturer SKU: TUN6781063 Material: carbide Designation: CPMT090308 T9225 Tungaloy indexable insert Facts Corner radius: 0.8 mm Plate thickness: 3.18 mm Size: 09 Rake angle: 11° Included angle: 80° Hole: cylindrical hole + single-sided countersink (40°–60°) Special features CVD-coated carbide (T9225) Rhombic plate form Single-sided chipbreaker ISO-standardised turning insert Suitable for medium to heavy steel turning FAQ What materials are best suited to this insert? The CPMT090308 T9225 Tungaloy indexable insert is intended primarily for steel workpieces and provides robust performance in medium to heavy steel turning operations. How does the hole and countersink design affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) on the CPMT090308 insert ensures accurate axial location and secure clamp engagement, improving repeatability when assembled in a compatible ISO holder. Which parameters determine holder compatibility? Compatibility is determined by the insert form, relief (rake) angle, tolerance class, fastening method, size and thickness; verifying these dimensions against the selected holder ensures correct seating for the CPMT090308 T9225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, reliable edge quality and straightforward holder compatibility for efficient non‑ferrous turning; order the insert via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. CPMT090308 TH10 CPMT indexable insert for turning by Tungaloy — 80° rhombic, 0.8 mm radius The CPMT090308 TH10 is an ISO‑standard indexable insert designed for turning operations, optimised for non‑ferrous materials and applications where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish Uncoated carbide for low cutting forces Sharp TH10 grade for non‑ferrous materials 80° rhombic geometry for versatile turning 0.8 mm corner radius for robust edge integrity Higher throughput with lower cutting forces The combination of a sharp TH10 grade and uncoated carbide substrate delivers a cutting edge that minimises built‑up edge and reduces cutting resistance when machining aluminium, copper alloys and other non‑ferrous materials. Reduced cutting forces translate directly into quieter operation, lower spindle load and the potential for increased feed rates while maintaining a clean surface finish. For production environments seeking measurable productivity gains, this cutting‑edge geometry provides a reliable efficiency improvement without complex process changes. Geometry engineered for precision and repeatability The 80° rhombic form with a 0.8 mm corner radius and 11° clearance offers a balance between edge strength and accessibility for external and internal turning. The standardised ISO shape ensures predictable cutting behaviour and repeatable results across holders and machines. The single‑sided chipbreaker is optimised for continuous chips typical of non‑ferrous machining, promoting stable chip control and reducing the risk of surface damage. Together, these features simplify process setup and support consistent dimensional accuracy. Easy system integration and secure fastening Compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness; the insert’s ISO designation CPMT090308 and a cylindrical hole with one‑sided countersink (40°–60°) facilitate secure clamping in a wide range of external holders and boring bars. The 3.18 mm thickness and standardised locating geometry make tool changes fast and predictable, reducing downtime during production swaps. Selecting a matched clamping kit and replacement screws ensures repeatable seating and optimal cutting performance. Practical handling and grade selection guidance The uncoated, universal TH10 grade is intended for applications where a sharp, clean edge is preferable to coated alternatives — typically short‑to‑medium runs in non‑ferrous materials or mixed shops requiring low cutting forces. The insert’s robustness supports stable machining even under variable feed conditions, while its ISO conformity assists in choosing the correct counterpart holder. For operations requiring extended tool life under higher thermal loads, a coated grade may be considered; for clean finishes and minimal cutting force, the supplied grade is appropriate. Contact Metav Werkzeuge to specify the CPMT090308 TH10 insert for precise non‑ferrous turning — email info@metav-werkzeuge.com or call +49 2822 7131930 for holder compatibility and supply details Technical data Article number: 6825711 SKU: 6825711-Tungaloy Manufacturer SKU: TUN6825711 Manufacturer article number: 6825711 Material: carbide Numbers / Core technical data Plate size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Main angle: 80° Designs / Special features ISO designation CPMT090308 Rhombic plate form Cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker Grade TH10 Uncoated carbide For turning applications FAQ What materials is this insert suited for? The CPMT090308 TH10 insert is optimised for non‑ferrous materials such as aluminium and copper alloys; the uncoated TH10 grade reduces built‑up edge and supports clean surface finishes. Can this insert be used in standard ISO holders? Yes. The ISO designation CPMT090308 and the standard hole and thickness enable use in compatible ISO‑type external holders and boring bars when the holder matches form, tolerance class and clamping style. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves edge strength and stability compared with finer radii, providing greater robustness during interrupted cuts while still offering good surface quality. Is the CPMT090308 suitable for finishing passes? The sharp uncoated cutting edge of the TH10 grade delivers excellent surface finish in finishing operations on non‑ferrous materials, provided cutting parameters are tuned to the workpiece and machine stiffness. What fastening does the insert require? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) and is secured using the matching screw and clamping kit specified for the chosen holder style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH6225 for reliable medium turning of stainless steel, combined with ISO compatibility and a balanced 0.2 mm corner radius for stable edge life; order directly via Metav Werkzeuge or contact our consultants for application advice. CPMT 09T302 AH6225 turning insert — rhombic ISO insert for turning, PVD-coated carbide, 11° relief, with hole — Tungaloy The CPMT09T302 AH6225 Tungaloy insert is an ISO-format rhombic turning insert designed for external and internal turning, optimised for stainless steel and medium cutting conditions. PVD-coated carbide grade AH6225 for robustness Specifically designed for stainless steel machining Rhombic ISO 09 geometry with 80° included angle 0.2 mm corner radius and 11° relief for balanced performance Consistent machining performance with a universal cutting grade The PVD-coated AH6225 grade delivers a reliable compromise between edge sharpness and wear resistance, which is particularly beneficial when machining stainless steel under varying conditions. The surface coating reduces built-up edge and improves thermal resistance, enabling sustained cutting at moderate feeds and speeds. By choosing this grade, shops gain repeatable tool life and fewer insert changes, improving throughput and reducing unplanned downtime. Geometry and chip control that support process stability The rhombic ISO 09 shape and one-sided chipbreaker are tailored to provide reliable chip formation and evacuation during both external and internal turning. The 80° included angle increases cutting edge strength in interrupted cuts, while the cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping in compatible holders. These features help maintain consistent surface finish and reduce the risk of vibration-related defects in the workpiece. ISO compatibility for straightforward system integration Produced to ISO standards for indexable turning, the insert integrates into common tool systems when matched for form, relief angle and tolerance class. The typical tool system comprises an appropriate external holder or boring bar, a shim/clamp set and replacement screws. This interoperability simplifies stocking and tooling decisions, allowing existing fixtures to be reused and reducing the need for special adapters. Balanced edge geometry for medium cutting and application guidance With a 0.2 mm corner radius, 11° relief and a 3.97 mm plate thickness, the insert balances cutting-edge sharpness with mechanical strength, making it suitable for medium-depth turning where a stable edge is required. Select the chipbreaker and clamping arrangement according to part rigidity and cutting parameters; the CPMT09T302 AH6225 insert performs best when matched to the workpiece stability and the chosen cutting data, helping to achieve predictable cycle times and surface quality. Contact Metav Werkzeuge for application-specific recommendations and availability of the Tungaloy CPMT09T302 AH6225 insert: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951211-Tungaloy Manufacturer SKU: TUN6951211 Manufacturer item number: 6951211 Label: CPMT09T302 AH6225 Tungaloy-Wendeplatte Core specifications Geometry size: 09 Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Plate thickness: 3.97 mm Special features Material: carbide Coating: PVD Grade: AH6225 Shape: rhombic Application: Drehen Chipformer: one-sided Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Model series: ISO-Drehwendeschneidplatten FAQ What material is this insert best suited for? The CPMT09T302 AH6225 insert is optimised for machining stainless steel, offering a universal performance profile for medium turning. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide provides enhanced edge stability and thermal resistance, which generally extends tool life in mixed or demanding stainless steel applications. Which holder types are compatible with this ISO insert? Compatibility depends on form, relief angle, tolerance class, clamping and thickness; the CPMT09T302 integrates with standard ISO-compatible external holders and boring bars when these parameters match. What benefits does the 0.2 mm corner radius offer? A 0.2 mm corner radius strikes a balance between edge strength and finish quality, reducing edge chipping while still permitting good surface integrity during medium cuts. Is the insert suitable for internal turning? Yes, the geometry and chip control characteristics make the insert suitable for both external and internal turning operations when the correct holder and setup are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 AH6225 Wendeplatten - Tungaloy
CPMT 09T302 AH6225 Tungaloy-Wendeplatte – Drehen Die CPMT09T302 AH6225 Tungaloy-Wendeplatte ist eine ISO-genormte Wendeschneidplatte für präzises Außen- und Innendrehen, speziell ausgelegt auf rostfreien Stahl und wechselnde Bearbeitungsbedingungen. PVD-beschichtetes Hartmetall für lange Standzeit Optimierte Schneidkante für rostfreien Stahl Rhombische Form 09, 80° Hauptwinkel Mit zylindrischem Loch und einseitiger Senkung Einseitiger Spanbrecher, Eckenradius 0,2 mm Langlebigkeit durch modernden Schneidstoff Die Wendeschneidplatte nutzt PVD-beschichtetes Hartmetall in der Sorte AH6225, was eine Kombination aus scharfer Schneidkante und stabiler Kante ergibt. Dieser Schneidstoff erlaubt konstante Schnittkräfte bei mittleren Schnitttiefen und sorgt für gleichmäßige Werkzeugstandzeiten bei der Bearbeitung von rostfreiem Stahl. Durch die Beschichtung verbessert sich die Verschleißfestigkeit, sodass Rüstzyklen und Werkzeugwechsel reduziert werden. Geometrie für sichere Spannlage und Wiederholgenauigkeit Die rhombische Form 09 mit einem Hauptwinkel von 80° und einem Frei winkel von 11° gewährleistet stabile Spanabfuhr und gute Zugänglichkeit an Außen- und Innendrehungen. Der Eckenradius 0,2 mm trägt zu definierten Schnittkanten bei, während die Plattendicke von 3,97 mm und das zylindrische Loch mit einseitiger Senkung für sichere und wiederholgenaue Befestigung sorgen. Die Kompatibilität zum Halter wird durch Form, Frei winkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Anwendungsspektrum und Anwendernutzen Für Serienfertigung und werkstattnahe Bearbeitung bietet diese Wendeschneidplatte klare Vorteile: die Sorte AH6225 ist für rostfreien Stahl optimiert, der einseitige Spanbrecher unterstützt kontrollierte Spanbildung, und die ISO-Norm gewährleistet einfache Austauschbarkeit zwischen gängigen Haltersystemen. Anwender profitieren von vorhersehbarer Oberflächengüte, reduzierten Stillstandszeiten und einfacher Sortenzuordnung bei wechselnden Werkstoffen. Die CPMT09T302 AH6225 von Tungaloy empfiehlt sich für produktive Zerspanung rostfreier Stähle; technische Rückfragen oder Bestellwünsche bitte per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6947675 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CPMT09T302 Fakten Eckenradius: 0,2 mm Hauptwinkel: 80° Frei winkel: 11° Plattendicke: 3,97 mm Plattengröße: 09 Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6225 (universell für rostfreien Stahl) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Einsatz: Drehen Modellserie: ISO-Drehwendeschneidplatten Kompatibilitätshinweis: Kompatibilität zum Halter durch Form, Frei winkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen FAQ Für welche Werkstoffe ist diese Wendeschneidplatte vorgesehen? Die CPMT09T302 AH6225 Tungaloy-Wendeplatte ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt, kann aber bei entsprechender Wahl des Spanbrechers und der Schnittdaten auch in angrenzenden Werkstoffklassen eingesetzt werden. Welchen Eckenradius hat die Platte und welche Bedeutung hat das? Die Platte hat einen Eckenradius von 0,2 mm; dieser feine Radius ermöglicht präzise Konturen und eine scharfe Schneidkante, was die Oberflächengüte bei mittleren Schnittbedingungen verbessert. Welche Vorteile bringt die Sorte AH6225 in der Praxis? Die Sorte AH6225 bietet eine scharfe, zugleich stabile Schneidkante und damit konstante Standzeiten bei wechselnden Bearbeitungsbedingungen, besonders vorteilhaft beim Drehen von rostfreiem Stahl. Ist die CPMT09T302 mit Standardhaltern kompatibel? Ja, die CPMT09T302 entspricht ISO-Normen; die Kompatibilität hängt jedoch von Form, Frei winkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab, sodass passende Halter ausgewählt werden sollten. Wie unterstützt das PVD-Coating die Bearbeitung? Das PVD-Coating verbessert die Härte und Verschleißfestigkeit der Schneidkante, reduziert Abrieb und verlängert damit die Zeit zwischen Werkzeugwechseln, was die Produktivität erhöht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMT 09T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, PVD-coated carbide grade and ISO‑standard geometry for stable, productive turning of stainless steels; order directly via Metav Werkzeuge or consult our advisors for selection support. CPMT 09T302 AH6225 Tungaloy Turning Insert — PVD‑coated carbide, 80° rhombic for turning A CPMT09T302 AH6225 ISO turning insert engineered for external and internal turning of stainless steels, offering a sharp yet stable cutting edge for mid‑range machining. PVD-coated carbide AH6225 grade Optimised for stainless steels Rhombic 80° geometry 0.2 mm corner radius Cylindrical hole with countersink 40°–60° Consistent cutting performance under changing conditions The PVD‑coated AH6225 grade combines a hard coating with a wear‑resistant carbide substrate to deliver extended tool life and repeatable results. Designed as a universal grade for stainless steels, the geometry supports a sharp cutting edge without sacrificing edge stability, which reduces the tendency for built‑up edge and improves process security. This balance makes the insert suitable for varied batch sizes and mixed production runs where tool reliability matters most. Secure clamping and straightforward ISO compatibility Compatibility with tool holders is defined by form, relief angle, tolerance class, fastening method, size and thickness; the insert conforms to ISO standards to ease holder selection. The central cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and correct seating in matched carriers, while the relief angle of 11° contributes to consistent cutting action. With a plate thickness of 3.97 mm, the insert integrates into common cutting systems for straightforward assembly and reliable repeatability. Geometry tuned for surface quality and predictable forces The rhombic shape at 80° and a 0.2 mm corner radius deliver a balance between form strength and finishing capability. A small radius reduces cutting forces for finer surface finishes, while the robust geometry resists chipping during interrupted cuts or variable cutting conditions. Understanding how corner radius affects cutting load allows process planners to optimise feeds and depths of cut for required surface tolerance without unnecessary trial and error. System readiness and recommended turning applications The insert is part of a system comprising an ISO turning insert, a compatible external holder or boring bar, underlay/clamp set and replacement screws. The single‑side chipbreaker is intended to support chip control in typical turning operations; choose chipbreaker and approach depending on workpiece stability and machining strategy. This CPMT09T302 AH6225 insert is primarily for turning—external and internal—where a combination of a sharp cutting edge and edge robustness is required for productive machining of stainless steels. Choose the Tungaloy AH6225 PVD‑coated grade for reliable stainless steel turning — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951179 Manufacturer SKU: TUN6951179 Metav SKU: 6951179-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Geometry angle: 80° Relief angle: 11° Corner radius: 0.2 mm Plate thickness: 3.97 mm Size: 09 Special features Coating: PVD Grade: AH6225 Material: carbide Application: Turning (external and internal) Chipbreaker: one‑sided Hole style: cylindrical hole + one‑sided countersink (40°–60°) Plate form: rhombic Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness System components: matching outer holder or boring bar, underlay/clamp set and spare screws FAQ Is this insert suitable for stainless steels? Yes. The CPMT09T302 AH6225 insert is formulated as a universal grade for stainless steels, offering a sharp, stable edge for mid‑range machining. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; use holders designed for ISO rhombic 80° inserts to fit this CPMT09T302 insert. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius reduces cutting forces compared with larger radii, aiding improved surface finish while maintaining sufficient edge strength for typical turning tasks. How does the hole and countersink affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure seating and stable clamping in matched tool carriers, which improves repeatability and reduces vibration. For which operations is the one‑sided chipbreaker intended? The one‑sided chipbreaker is intended for general external and internal turning where chip control and predictable chip formation are required under varying cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 AH725 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade optimised for process security and the universal performance of the AH725 sort; the insert’s 0.2 mm nose radius and rhombic geometry deliver consistent edge life and reliable part finish. Order directly via Metav Werkzeuge or consult the technical team for suitability and holder compatibility. CPMT 09T302 AH725 indexable insert for Turning by Tungaloy — PVD‑coated carbide, 0.2 mm radius The CPMT09T302 AH725 insert is an ISO‑standard rhombic indexable insert designed for external and internal turning applications, offering a balanced combination of wear resistance and process stability. ISO‑standard rhombic insert PVD‑coated carbide AH725 Universal for steel and stainless steels Cylindrical hole with 40°–60° countersink Consistent cutting performance and part quality The rhombic indexable insert with a 0.2 mm nose radius provides a controlled cutting edge for precise diameter tolerance and surface finish. The PVD‑coated AH725 grade combines a wear‑resistant substrate with a hard, thin coating to reduce flank wear and improve tool life during intermittent cuts. For workshop planners and production engineers, this means fewer insert changes and a more predictable component finish when machining steels and stainless steels. The coating also supports higher cutting speeds while maintaining dimensional stability. Designed for secure clamping and straightforward holder matching Compatibility with toolholders is determined by geometry, clearance, tolerance class, fastening, size and thickness. The rhombic form and the cylindrical hole with single‑side countersink (40°–60°) enable secure locating and repeatable seating in standard ISO holders. The 11° clearance angle and 3.97 mm thickness make the insert suitable for a wide range of external and internal turning tool assemblies. Specifying the correct holder form and tightening torque ensures repeatable performance and reduces the risk of insert movement under load. Process reliability across changing materials and small tools The AH725 grade is formulated as a universal, fracture‑resistant option for mixed material runs and smaller tool set‑ups where process security is paramount. The single‑sided chipbreaker controls chip formation in varied cutting conditions, lowering the likelihood of workpiece damage and simplifying chip management. For operations that alternate between alloyed steels and stainless steels, the insert’s balanced substrate and coating performance maintain edge strength and support consistent productivity across batch changes. For precise selection advice or compatibility checks for turning tasks, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — consultants can advise on holder match and application‑specific settings Technical Data Article number: 6865194 Manufacturer SKU: TUN6865194 SKU: 6865194-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Nose radius: 0.2 mm Clearance angle: 11° Approach/cutting angle: 80° Thickness: 3.97 mm Size: 09 Countersink angle: 40°–60° Special features PVD‑coated carbide AH725 Rhombic insert form One‑sided chipbreaker Cylindrical hole + single‑side countersink Suitable for turning; universal for steel and stainless steels ISO‑standard; holder compatibility depends on form, clearance, tolerance, fastening, size and thickness FAQ What applications suit this type of insert? The CPMT09T302 AH725 insert is designed for external and internal turning where consistent edge life and process security are required; it is commonly used for general turning tasks on steel and stainless steels. Which materials can be machined with this grade? The AH725 grade performs well on a broad range of steels and stainless steels, offering fracture resistance and stable chip control for mixed‑material production. How does the hole and countersink affect mounting? The cylindrical hole with a single‑side countersink (40°–60°) ensures repeatable seating in compatible ISO holders and supports secure clamping for the insert 6865194-Tungaloy. Is the insert suitable for high‑speed turning? The PVD coating and the carbide substrate provide improved wear resistance that supports higher cutting speeds compared with uncoated grades, while the chipbreaker maintains effective chip control. How to ensure correct holder compatibility? Compatibility depends on the holder’s form, the insert’s clearance angle, tolerance class, fastening type, size and thickness; confirm these parameters against the ISO holder specification before assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T302 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade (AH725), a precise 0.2 mm corner radius and ISO conformity for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application recommendations. CPMT 09T302 AH725 — CPMT09T302 AH725 indexable insert for turning (Tungaloy) CPMT09T302 AH725 is an ISO-standard indexable insert designed for external and internal turning, offering a universal, process-secure grade for steel and stainless steels. PVD-coated cemented carbide AH725 Universal grade for steel and stainless steels Rhombic form with 0.2 mm corner radius Cylindrical hole with single-sided countersink Consistent performance across mixed materials The CPMT09T302 insert is specified for turning and uses the AH725 PVD-coated cemented carbide grade to deliver reliable results when machining mixed batches. The coating and substrate combination promote stable chip formation and resistance to edge breakage, which translates into fewer interruptions and more predictable cycle times. For operations with varying workpiece materials and smaller tool geometries, this universal grade reduces the need for frequent insert changes while maintaining surface quality on both steel and stainless steels. Geometry and clamping that reduce vibration and improve repeatability A well-chosen insert geometry directly affects tool stability. The rhombic form with an 80° cutting angle and 11° clearance provides secure engagement and good visibility of the cutting edge, while the 0.2 mm corner radius supports controlled finishing passes. The insert is supplied with hole and a cylindrical hole plus one‑sided countersink (40°–60°) to ensure consistent locating and clamping in standard ISO-compatible holders. These design aspects minimise micro-movements at the cutting edge and support repeatable part tolerances. Productivity benefits through optimised chip control and material breadth A single-sided chipbreaker matched to the AH725 grade promotes predictable chip flow and reduces the risk of built-up edge during interrupted cuts. The combination of chip control and the cemented carbide substrate enables higher process reliability, particularly on medium-duty turning tasks where tool life and surface integrity are priorities. Conformance to ISO-standard dimensions ensures quick replacement in existing tool systems and simplifies tool management on the shop floor, contributing to overall productivity gains and lower process variability. For application-specific advice on Tungaloy AH725 inserts or to arrange supply through Metav Werkzeuge, please contact our consultants at Metav Werkzeuge for machining recommendations and compatibility checks. Technical data Article number: 6863530 Manufacturer SKU: TUN6863530 Metav SKU: 6863530-Tungaloy Model series: ISO turning inserts Material: cemented carbide Facts Thickness: 3.97 mm Size designation: 09 Corner radius: 0.2 mm Clearance angle: 11° Cutting/wedge angle: 80° Special features ISO designation: 09T302 Grade/coating: AH725 (PVD-coated) Insert form: rhombic Chipbreaker: single-sided Mounting: cylindrical hole + one-sided countersink (40°–60°) Application: turning FAQ What materials is this insert suitable for? The CPMT09T302 AH725 insert is designed as a universal grade for steel and stainless steels, offering stable chip formation and reduced edge breakage when used with appropriate cutting parameters. Which grade and coating does the insert use? This indexable insert is supplied in the AH725 grade with a PVD-coated cemented carbide substrate to balance wear resistance and toughness for mixed-material turning. How does the insert mount to standard holders? The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure locating and clamping in ISO-compatible turning holders. What edge preparation is provided for finishing passes? The insert’s 0.2 mm corner radius is suitable for improved surface finish on finishing passes while maintaining edge strength for general turning tasks. Is the insert compliant with ISO dimensions? Yes. The insert follows ISO-standard dimensions under designation 09T302, allowing direct replacement in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a wear-resistant PVD-coated carbide grade and a compact rhombic geometry to secure consistent turning performance and predictable tool life; order directly via Metav Werkzeuge or contact the consultants for application advice. CPMT09T302 AH8005 indexable turning insert by Tungaloy — PVD-coated carbide, 0.2 mm radius A CPMT09T302 AH8005 PVD-coated carbide indexable insert designed for ISO-standard turning, optimised for stable machining of heat-resistant alloys and other hard materials. *PVD-coated carbide grade AH8005 *ISO rhombic insert, size 09, thickness 3.97 mm *11° relief angle with 0.2 mm corner radius *Cylindrical hole with single-side countersink 40°–60° *Designed for heat-resistant alloys and hard materials Precision and compatibility that supports predictable production The insert is an ISO-standard rhombic indexable cutter element engineered for consistent seating and repeatable clamping in suitable holders. The combination of a defined 11° relief angle and the rhombic geometry ensures stable cutting conditions, reducing vibration and promoting consistent chip formation. Compatibility with holders is determined by form, clearance angle, tolerance class, attachment method, size and thickness, which together guarantee correct fitment and safe clamping under production loads. These clear specifications simplify tool selection and reduce setup uncertainty on the shop floor. Material performance and wear resistance for demanding alloys Manufactured from PVD-coated carbide in grade AH8005, the insert is optimised for machining heat-resistant alloys and other hard materials under stable cutting conditions. The PVD coating improves edge resistance to adhesion and thermal wear, extending tool life where temperatures at the cutting edge are elevated. In practical terms, this means fewer indexings per workpiece batch and more predictable process windows, contributing to reduced cycle-time variability and better overall tool-cost control in serial production. Geometry and mounting details that aid handling and repeatability The insert features a 0.2 mm corner radius, a 3.97 mm thickness and an ISO size designation of 09, balancing edge strength with achievable surface finish. A cylindrical hole with a single-sided countersink (40°–60°) provides secure mechanical location and easy clamping with standard screws and clamp sets. The single-sided chipbreaker is tailored to generate reliable chip forms when the grade and cutting parameters match the workpiece material and rigidity of the setup. Clear geometry and standard hole style reduce fitting errors and simplify inventory management of spares. Practical benefits for workshop efficiency and process security Using a well-specified insert such as this reduces process variation by combining a stable edge geometry with a wear-resistant substrate, which supports longer uninterrupted runs and reduced rework. Where surface integrity and dimensional consistency are priorities, the balanced edge configuration and PVD surface treatment contribute to improved repeatability. Specifying the correct chipbreaker and grade for the material and machining mode results in efficient swarf control and fewer interruptions to material handling. Contact Metav Werkzeuge for application-specific recommendations and to request the Tungaloy CPMT09T302 AH8005 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical advice Technical data Article number: 6775782 Manufacturer SKU: TUN6775782 SKU: 6775782-Tungaloy Model series: ISO turning indexable inserts Core data Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Insert size: 09 Thickness: 3.97 mm Special features PVD-coated carbide grade AH8005 Rhombic insert geometry Single-sided chipbreaker With hole: cylindrical hole + single-side countersink (40°–60°) Application: Turning ISO-standard indexable insert FAQ What materials is this insert suitable for? The CPMT09T302 AH8005 insert is designed for machining heat-resistant alloys and other hard materials when used under stable cutting conditions; the PVD-coated carbide grade AH8005 improves wear resistance in such applications. Which holders and fastening should be used with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening and size; the CPMT09T302 uses a cylindrical hole with a single-sided countersink (40°–60°) and requires a matching ISO holder, clamp set and screw for correct clamping. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert promotes controlled chip formation when the grade and machining parameters are matched to the workpiece and setup rigidity, aiding swarf handling and reducing cycle interruptions. Can this insert achieve good surface finish on hard alloys? With the 0.2 mm corner radius and correct cutting parameters, the insert can produce consistent surface quality on hard materials; the PVD coating helps maintain edge integrity to support repeatable finishes. Is the CPMT09T302 AH8005 suitable for high-temperature cutting conditions? Yes, the PVD-coated carbide composition of the AH8005 grade is selected for improved resistance to thermal wear, making it suitable for elevated cutting temperatures typical of heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 AH8015 Wendeplatten - Tungaloy
Combine the PVD‑coated carbide AH8015 with a secure rhombic geometry and a 0.2 mm corner radius for consistent chip control and extended tool life — order or request application advice directly via Metav Werkzeuge or consult our specialists for machining recommendations. CPMT 09T302 AH8015 — Turning indexable insert (Tungaloy) The CPMT 09T302 AH8015 is an ISO‑standard indexable turning insert designed for external and internal turning of heat‑resistant alloys and general machining tasks. PVD-coated carbide grade AH8015 Rhombic insert, 80° cutting geometry Single-sided chipbreaker with hole and countersink 0.2 mm corner radius, 3.97 mm thickness Balanced grade for heat‑resistant alloys and longer tool life The AH8015 grade is a PVD‑coated carbide specifically formulated as a first choice for machining heat‑resistant alloys. Its composition provides a deliberate compromise between wear resistance and edge stability, which translates into longer service intervals and predictable tool change cycles. For production environments where consistent surface finish and repeatable tool life are essential, this insert offers measurable economy: the coating reduces adhesion and thermal degradation, while the substrate maintains a stable cutting edge under intermittent heat loads. ISO geometry and secure clamping for repeatable results Designed to ISO dimensions, the insert’s rhombic shape and 80° cutting geometry ensure wide applicability with standard turning toolholders. Compatibility to a holder is determined by form, 11° clearance angle, tolerance class, fixing method, size and thickness; the CPMT series complies with those conventions to enable straightforward replacement and set‑up. The 3.97 mm thickness and 0.2 mm corner radius support robust seating and reduced vibration, while the insert’s hole—cylindrical with a one‑sided countersink (40°–60°)—facilitates reliable clamping and reproducible positioning in the pocket, promoting repeatable cutting performance. Practical benefits for productivity and process safety With a single‑sided chipbreaker and a grade tailored for demanding alloys, the insert supports controlled chip formation and evacuation in many turning operations. Selection of chipbreaker style and grade should be matched to the workpiece material, machining method and machine stability to achieve optimal results; for tough, heat‑resistant materials, AH8015 provides a balanced approach. The indexable design allows fast insert changes, reducing downtime and increasing throughput, while the measured geometry contributes to process safety and consistent part quality in series production and toolroom applications. For machining applications that demand a balance of edge strength and wear resistance, contact Metav Werkzeuge for tailored advice on using the Tungaloy CPMT 09T302 AH8015 insert (SKU 6951181-Tungaloy) — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6951181 SKU: 6951181-Tungaloy Manufacturer SKU: TUN6951181 Model series: ISO turning indexable inserts Application: Turning Material: Carbide Grade/coating: AH8015 (PVD-coated) Core data Size: 09 ISO designation: 09T302 Thickness: 3.97 mm Clearance angle: 11° Cutting angle: 80° Corner radius: 0.2 mm Hole: with hole (cylindrical + one-sided countersink 40°–60°) Special features Rhombic insert shape Single-sided chipbreaker PVD-coated carbide grade AH8015 ISO-standard geometry for holder compatibility FAQ Which materials is this insert best suited for? The AH8015 grade is optimised for machining heat‑resistant alloys; the CPMT 09T302 insert is indicated as a first choice for general machining of these materials and offers balanced wear resistance and edge stability. How is holder compatibility ensured for this insert? Compatibility is determined by insert form, 11° clearance angle, tolerance class, fixing, size and thickness; the ISO‑standard geometry of the CPMT series enables straightforward matching with standard turning holders. What chip control can be expected from this geometry? The single‑sided chipbreaker combined with the insert grade provides controlled chip formation for many turning operations, improving evacuation and reducing risk of entanglement. What are the key dimensional specifications to check before ordering? Check the ISO designation (09T302), size (09), thickness (3.97 mm), corner radius (0.2 mm) and the hole/countersink style to ensure correct fit in the chosen toolholder. Is the insert coated and how does the coating help? The CPMT 09T302 is a PVD‑coated carbide in grade AH8015; the coating reduces adhesion and thermal wear, contributing to improved tool life and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com