CPMT 080308 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, a precise 0.8 mm corner radius and robust rhombic geometry for reliable milling performance; order directly via Metav Werkzeuge or consult our specialists for application advice. CPMT080308 GH330 Tungaloy indexable insert for milling The CPMT080308 GH330 indexable insert is engineered for versatile milling tasks within Tungaloy milling systems, offering a balanced mix of wear resistance and edge stability for face, shoulder, slot and high-feed operations. GH330 grade for wear resistance and edge stability Rhombic 08 form with 0.8 mm corner radius Cylindrical hole with 40°–60° one-sided countersink 11° clearance and 3.18 mm plate thickness Higher productivity through balanced cutting performance The GH330 cutting grade combines wear resistance and controlled toughness to extend service life while maintaining cutting-edge stability. This balance reduces unscheduled index changes and supports longer tool cycles, which improves overall process efficiency. The insert’s classification as a rhombic milling grade means the geometry is optimised for a range of operations — from face milling to contour work — where consistent chip formation and predictable flank wear are essential. Compatibility with Tungaloy milling bodies ensures correct seating and force transmission, preserving dimensional accuracy throughout production. Versatile geometry for adaptable machining strategies A rhombic 08 footprint with a 0.8 mm corner radius and 11° clearance provides dependable entry conditions and reduced cutting forces in many milling tasks. The single-sided chipbreaker is tuned to enhance chip control for common materials encountered in workshops and production lines, helping to avoid rework and surface damage. The insert’s cylindrical hole with a one-sided countersink (40°–60°) secures stable clamping and repeatable positioning on the cutter body, translating the insert geometry directly into process reliability and improved surface finish on the workpiece. Robust material and practical handling in systems Manufactured from carbide, the plate delivers the hardness required for industrial milling while the 3.18 mm plate thickness supports rigidity under moderate cutting loads. The insert is supplied with a central hole for positive clamping using standard screws and, when mounted in a compatible Tungaloy cutter, reproduces consistent cutting angles and chip evacuation paths. Clear specification of seat, geometry and cutter family is important: the insert is designed to function only where mechanical and geometric compatibility with the milling body is ensured, guaranteeing repeatable results and reduced setup time. Contact Metav Werkzeuge for specification support on the CPMT080308 GH330 insert and to confirm the optimal tool body pairing; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: 6802420 SKU: 6802420-Tungaloy Model series: Fräswendeschneidplatten Material: Hartmetall Core data Radius: 0.8 mm Plate thickness: 3.18 mm Clearance angle: 11° Main angle: 80° Size designation: 08 ISO code: 080308 Special features Shape: Rhombic Hole: Cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: One-sided chipbreaker Grade/coating: GH330 cutting grade Application: Milling System note: For Tungaloy milling systems; plate seat and geometry must match the cutter body FAQ What applications suit this insert best? The CPMT080308 GH330 indexable insert is suitable for face, shoulder, slot, high-feed and contour milling within the designated Tungaloy milling families. Is the insert compatible with all Tungaloy cutters? Compatibility requires matching the insert seat, geometry and cutter family; the CPMT080308 GH330 functions where the plate seat and geometry are technically aligned with the Tungaloy milling body. What material is the insert made from? The insert is made from carbide, chosen to deliver the hardness and rigidity required for industrial milling applications. How does the GH330 grade affect performance? The GH330 grade combines wear resistance and edge stability to provide longer tool life and predictable flank wear under varied cutting conditions. What does the hole and countersink design provide? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating on the cutter, improving positional accuracy and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080308 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, UX30 uncoated carbide and a secure, centre‑mounted fit to achieve stable chip formation and low cutting forces in milling operations; order the CPMT080308 UX30 indexable inserts directly via Metav Werkzeuge or contact the consultants for application advice. CPMT080308 UX30 indexable insert for milling (Tungaloy) — rhombic, 80° included angle The CPMT080308 UX30 is an indexable milling insert designed for face, shoulder, slot, high‑feed and contour milling within compatible Tungaloy milling systems, requiring a matching insert seat and body geometry. Rhombic CPMT insert for milling Sharp cutting edge for low cutting forces Uncoated carbide grade UX30 for good chip control Central hole with cylindrical bore and single countersink High‑performance cutting for reduced force and reliable chip control The UX30 grade is an uncoated carbide formulated for a sharp cutting edge, prioritising low cutting forces and consistent chip formation. This combination reduces load on the toolholder and spindle, which improves cycle stability in delicate or thin‑walled components. The 0.8 mm corner radius balances edge strength and surface finish, while the 11° relief angle minimises rubbing on the flank face and helps maintain a clean shear plane. When low cutting force and controlled chip evacuation are decisive, this insert offers a pragmatic technical advantage. Precise mounting and system compatibility for repeatable results Designed for integration into Tungaloy milling systems, the insert features a centre hole with a cylindrical bore and single‑sided countersink (40°–60°) for secure clamping. Correct matching of the insert seat, plate geometry and milling body is essential for repeatable positioning and torque transmission; mismatched components can impair accuracy or cause premature wear. The rhombic geometry provides two usable cutting corners per index, facilitating cost‑effective indexing and predictable regrind intervals when applicable. Application range and machining advantages in common milling tasks Typical uses include face milling, shoulder milling, slotting, high‑feed operations and contouring, depending on the chosen tool family. In these roles the insert’s design delivers stable chip formation and low cutting resistance, which can translate into longer tool life and fewer interruptions for chip clearance. For materials and applications where minimal cutting force and clean chips are prioritized, the uncoated grade performs particularly well, offering a pragmatic solution for mixed‑batch production and setups where tool changeovers must be efficient. Practical selection tips and handling recommendations Select the insert when the process requirement is dominated by low force cutting or when chip control is critical. As the grade is uncoated, it is suited to applications where coating benefits—such as thermal barrier or anti‑adhesion—are less important than achieving a sharp edge and consistent shear. Ensure correct clamping torque and check that the 80° included angle and 3.18 mm plate thickness match the tool body specification before operation. Regular inspection of the cutting edge and adherence to the tool‑system matching rules will support repeatable performance and safe machining. Contact Metav Werkzeuge for a tailored application review of the CPMT080308 UX30 insert and to confirm compatibility with the intended milling body — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802421 SKU: 6802421-Tungaloy Manufacturer SKU: TUN6802421 Model series: Milling indexable inserts Material: Carbide Facts Corner radius: 0.8 mm Insert size: 08 Plate thickness: 3.18 mm Included angle: 80° Relief angle: 11° Special features Grade: UX30 (uncoated) Geometry: Rhombic insert Chipbreaker: Single‑sided Hole style: Cylindrical bore with single countersink (40°–60°) Mounting: With hole Typical use: Milling (face, shoulder, slot, high‑feed, contour) Note: Insert seat, geometry and milling body must match FAQ What milling tasks is this insert suited to? The CPMT080308 UX30 insert is suitable for face milling, shoulder milling, slotting, high‑feed and contour milling depending on the chosen milling body and tool family. Which material characteristics make UX30 a good choice? The UX30 uncoated carbide grade provides a sharp cutting edge and promotes good chip formation, making it appropriate where low cutting forces and clean chips are priorities. How is the insert secured in the toolbody? The insert is secured via a centre hole with a cylindrical bore and a single‑sided countersink (40°–60°); correct seat geometry and clamping are required for repeatable, secure mounting. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge strength compared with very small radii and helps produce a consistent surface finish while still allowing acceptable cutting forces for finishing and semi‑finishing passes. Is this insert compatible with standard Tungaloy systems and what is the SKU? Yes, the insert is designed for Tungaloy milling systems when seat and geometry match; the item is listed as SKU 6802421‑Tungaloy (manufacturer SKU TUN6802421). Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090302 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 durability, ISO compatibility and a compact 0.2 mm corner radius for consistent turning results. Order the insert via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT090302 AH725 ISO turning insert — PVD-coated carbide for turning, by Tungaloy The CPMT090302 AH725 is an ISO rhombic turning insert designed for reliable external and internal turning; its compact geometry and universal grade make it suitable for mixed-material production where process security is critical. ISO rhombic insert CPMT090302 PVD-coated AH725 universal carbide grade 0.2 mm corner radius for accurate finish Cylindrical hole + single countersink 40°–60° Consistent cutting performance and reduced process risk The PVD-coated AH725 grade is formulated as a universal, fracture-resistant option for machining steel and rostfreier Stahl, providing stable chip formation and predictable wear characteristics. A PVD-coated carbide substrate reduces adhesive wear and extends edge life under variable conditions, which translates into fewer tool changes and more predictable batch times. The small 0.2 mm corner radius supports fine profiling and improved surface finish on light to medium cuts, while the 11° relief angle ensures reliable engagement and reduced rubbing. These technical choices prioritise reproducibility and economical productivity in component turning. Designed for fast system integration and secure clamping The insert follows ISO dimensions and is compatible with holders when matched by form, relief, tolerance class, fastening, size and thickness, which simplifies stocking and tool management. The cylindrical hole with a single countersink 40°–60° enables firm location and consistent clamping torque in standard indexable holders; the system approach—insert, holder, underlay/shim and fixing screw—reduces set-up time and minimises downtime during index changes. Clear adherence to ISO geometry helps maintain repeatable clamping and dimensional stability across multiple machines and operators. Versatile application range with a focus on process security Engineered for both external and internal turning, the single‑sided chipbreaker and AH725 composition provide a balance between edge robustness and general-purpose performance. This combination is particularly advantageous when workshops face varying workpiece materials or smaller tool assemblies that demand high process security. The insert’s rhombic form (09) and 3.18 mm thickness allow compact toolholders to deliver consistent cutting forces, while the universal grade supports long runs with fewer quality deviations. For operations seeking a dependable, multi‑purpose turning solution, this insert offers a pragmatic compromise between precision and tool life. For tailored application advice or to order the Tungaloy CPMT090302 AH725 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants are ready to assist with holder compatibility and cutting-data recommendations. Technical data Article number: 6865193 SKU: 6865193-Tungaloy Manufacturer SKU: TUN6865193 Model series: ISO turning inserts Designation: CPMT090302 AH725 Material: carbide Coating: PVD Grade: AH725 Shape: rhombic Size: 09 Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Wedge angle: 80° Hole: cylindrical hole with single countersink 40°–60° Chipbreaker: one-sided Application: turning Facts Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Size code: 09 Wedge angle: 80° Countersink range: 40°–60° Special features ISO‑standardised rhombic geometry for easy holder matching PVD coating for improved wear resistance Universal, fracture‑resistant grade for steel and rostfreier Stahl Suitable for external and internal turning Compact design for small‑scale toolholders System setup: insert, holder, underlay/shim and fixing screw FAQ What holders are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the CPMT090302 AH725 fits holders designed for 09-size ISO rhombic inserts with 3.18 mm thickness and a cylindrical hole with a single countersink (40°–60°). Which materials can be machined with this grade? The AH725 grade on the CPMT090302 insert is a universal, fracture‑resistant option intended for machining steel and rostfreier Stahl, making it suitable for mixed‑material workshops and changing workpiece conditions. What benefit does the PVD coating provide? The PVD coating on this carbide insert reduces adhesive wear, improves edge strength under variable cutting conditions and contributes to more consistent tool life for the Tungaloy turning insert. Is the insert suitable for internal turning? Yes, the insert is designed for both external and internal turning operations; the rhombic form and compact radius support precise profiling in confined tool geometries. How is the insert secured in the holder? The insert is located by the cylindrical hole and clamped using the single countersink (40°–60°) arrangement; a matching underlay/shim and fixing screw complete the standard ISO system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090302 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (GT9530), a fine 0.2 mm corner radius and the ISO rhombic 80° geometry to achieve consistent finishing and extended tool life under stable turning conditions. Order genuine Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for compatibility checks and application support. CPMT 090302 GT9530 Tungaloy turning insert – coated cermet, 80° rhombic CPMT 090302 GT9530 is an ISO rhombic indexable insert designed for precision turning and fine finishing in stable machining set-ups ISO rhombic 80° geometry for stable cutting Coated cermet grade GT9530 for fine finishing Cylindrical hole with 40°–60° countersink 3.18 mm thickness for secure clamping Delivering a consistent finish with a wear‑resistant grade The coated cermet GT9530 combines a hard, wear‑resistant cermet substrate with a tailored coating that supports longer tool life during finish turning. This specification is aimed at operations where a superior surface quality and repeatable results matter. The modest 0.2 mm corner radius helps maintain edge strength while producing fine surface textures; under stable set‑ups the result is fewer reworks and more consistent component quality. Reliable fit, clamping and geometry for production use Compatibility is determined by insert form, relief angle, tolerance class, fastening and size; the ISO rhombic shape and the specified 3.18 mm plate thickness ensure secure seating in standard holders. The cylindrical hole with a single‑sided countersink (40°–60°) provides reliable clamping and repeatable positioning when paired with the correct clamp set. Together these features reduce chatter risk and support predictable tool life in serial turning applications. Practical guidance for selection and application Choose the GT9530 grade and the single‑sided chipbreaker when finishing steel components under stable cutting conditions. The insert is intended primarily for external and internal turning where good surface finish and extended durability are priorities. For roughing or unstable set‑ups, consider more robust geometries or grades; for light finishing and precise tolerances the coated cermet insert provides an excellent balance between wear resistance and surface quality. Contact Metav Werkzeuge today to confirm holder compatibility and to order genuine Tungaloy CPMT 090302 GT9530 inserts; specialist advice and technical data are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998309 SKU: 6998309-Tungaloy Manufacturer SKU: TUN6998309 Model series: ISO-Drehwendeschneidplatten ISO designation: CPMT090302 Full article name: CPMT090302 GT9530 Tungaloy-Wendeplatte Facts Geometry angle: 80° Relief angle: 11° Corner radius: 0.2 mm Plate thickness: 3.18 mm Plate size: 09 Special features Coated cermet grade GT9530 Material: cemented carbide substrate with coating Single‑sided chipbreaker Rhombic plate form Cylindrical hole + one‑sided countersink (40°–60°) Intended application: turning (external and internal) Compatibility depends on form, relief angle, tolerance, fastening and size FAQ What materials is this insert best suited for? The CPMT 090302 GT9530 insert is optimised for steel finishing operations; the coated cermet grade is selected for its wear resistance and surface‑quality performance in stable turning conditions. How does the hole style affect clamping? The cylindrical hole with a single‑sided countersink (40°–60°) on the CPMT 090302 ensures secure clamping and precise seating in compatible holders, improving repeatability and tool life. Can this insert be used for roughing operations? The GT9530 grade is a wear‑resistant finishing to light universal grade; for heavy roughing, a more robust geometry or a different grade is recommended rather than the CPMT 090302. Which holder characteristics must be checked for compatibility? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; verify these parameters before mounting the CPMT 090302 in a holder. What is the manufacturer article number and SKU? The manufacturer article number is 6998309 and the SKU appears as 6998309‑Tungaloy (manufacturer SKU: TUN6998309). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090302 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet grade GT9530 for improved surface quality and the 0.2 mm corner radius for precise finishing. The rhombic ISO geometry with an 80° included angle delivers reliable compatibility with standard holders; order the CPMT090302 GT9530 insert directly via Metav Werkzeuge or consult our specialists for application matching. CPMT090302 GT9530 ISO turning insert (coated cermet) — Tungaloy A CPMT090302 ISO turning insert in coated cermet grade GT9530, designed for finishing to light-universal turning applications in steel; compatible with ISO holders where form, relief and thickness match Coated cermet grade GT9530 for long life Rhombic 09 shape with 80° included angle 0.2 mm corner radius for fine finishing Single-sided chipbreaker with central hole Consistent finishing and extended service life The insert’s GT9530 composition is a coated cermet that balances wear resistance and edge robustness, which enables prolonged cycles between indexings and reduced changeover time. Under stable machining conditions the grade supports fine surface results while maintaining a consistent cutting edge, so finishing passes become more predictable and less dependent on frequent tool changes. This translates into measurable productivity gains and lower per-part cost in batch production. Standardised geometry for simple holder selection Designed to ISO dimensions, the rhombic 09 form with an 80° included angle and an 11° relief angle ensures compatibility with a wide range of indexable turning holders. The insert’s centre hole with a cylindrical bore and a single-sided countersink (40°–60°) supports secure clamping and repeatable positioning. These standard features simplify tool assembly and reduce the time required for setup and inspection, especially when replacing inserts across multiple machines. Stable chip control for predictable machining Equipped with a single-sided chipbreaker, the geometry promotes controlled chip formation during external and internal operations, improving process stability and surface integrity. The 0.2 mm corner radius is tailored for light finishing to deliver a refined profile without compromising feed flexibility. With a plate thickness of 3.18 mm, the insert provides sufficient strength for steady cuts while remaining suitable for fine-geometry applications where vibration must be minimised. Contact Metav Werkzeuge for matching holders and to secure Tungaloy CPMT090302 GT9530 inserts for improved finishing performance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998307 Manufacturer SKU: TUN6998307 SKU: 6998307-Tungaloy Model series: ISO turning inserts Material: Coated cermet (GT9530) Application: Turning Facts ISO designation: CPMT090302 Size: 09 Shape: Rhombic Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Hole: central cylindrical hole with single-side countersink (40°–60°) Special features Single-sided chipbreaker Coated grade for finishing to light-universal cutting Suitable for external and internal turning Compatible with ISO-standard holders Stable chip formation under recommended conditions FAQ What materials are best suited for this insert? The CPMT090302 GT9530 insert is specified as a coated cermet grade suitable for machining steel in finishing to light-universal applications, offering good surface quality and extended tool life under stable cutting conditions. How does the insert attach to standard holders? Compatibility is achieved via the ISO geometry: the rhombic form, 11° relief angle, thickness and the central cylindrical hole with countersink match corresponding ISO holders and clamping sets to ensure repeatable seating and secure fixation. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius typically supports fine finishing passes, delivering improved surface integrity while allowing modest feed rates; it is especially effective where a smooth profile and minimal post-processing are required. Is the chipbreaker suitable for both external and internal turning? Yes, the single-sided chipbreaker is designed for controlled chip formation in both external and internal turning, helping to maintain process stability when operating under recommended conditions. How does the GT9530 grade compare in wear performance? GT9530 is a coated cermet grade optimised for wear resistance in finishing and light-universal tasks; it provides longer tool life than uncoated grades in stable setups and yields consistent edge integrity for high-quality surfaces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090302 NS9530 Wendeplatten - Tungaloy
The combination of ISO‑standard compatibility and the NS9530 uncoated cermet grade delivers a finishing insert that reduces cutting forces while improving surface quality; its rhombic geometry and 0.2 mm corner radius support precise, repeatable turning operations. Order the CPMT090302 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application guidance. CPMT 090302 NS9530 Tungaloy turning indexable insert — rhombic 09, 0.2 mm corner radius, 11° clearance CPMT090302 NS9530 Tungaloy‑Wendeplatte is an ISO‑standard indexable insert for turning, designed for finishing steel components with low cutting forces and a sharp cutting edge ISO‑standard rhombic insert Uncoated cermet NS9530 for finishing Sharp cutting edge for low cutting forces Cylindrical hole with single‑side countersink Achieve superior finishes on turned steel components The uncoated cermet grade NS9530 is formulated as a finishing class for steel, offering a sharp cutting edge that reduces plastic deformation at the cutting zone and promotes excellent surface finish. With a small, defined 0.2 mm corner radius and a plate thickness of 3.18 mm, this insert limits burr formation and supports consistent part tolerances during continuous cuts and small depth of cut operations. The material behaviour of cermet combines ceramic hardness with metallic toughness, which means improved edge stability when producing fine surfaces on shafts, housings and other turned parts. Reliable clamping and geometry for predictable process stability The rhombic 09 geometry and ISO form ensure straightforward compatibility with a wide range of external holders and boring bars; the cylindrical hole with a single‑side countersink (40°–60°) supports secure seating and repeatable indexing. The insert’s 11° clearance reduces rubbing on the flank face, lowering heat generation and helping to maintain dimensional accuracy. This geometry selection is particularly effective for finishing passes where tool rigidity, repeatable seating and minimal vibration are crucial to achieve consistent cycle‑to‑cycle results. Productivity gains through optimised edge preparation and chip control Equipped with a one‑sided chipbreaker and the fine edge properties of the cermet grade, this insert is tailored to minimise cutting forces and produce short, controllable chips in many steels. Reduced forces translate into less spindle load and more stable cutting conditions, enabling higher feed consistency and shorter finishing cycles. For process planners, the result is measurable: fewer rework steps and a higher first‑pass yield when turning components that demand tight surface and dimensional specifications. For demanding finishing work, choose the Tungaloy CPMT 090302 NS9530 insert and consult Metav Werkzeuge for technical matching and application notes — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: 6998443 SKU: 6998443-Tungaloy Manufacturer SKU: TUN6998443 Model series: ISO turning indexable inserts Material: carbide Facts Thickness: 3.18 mm Size: 09 Cutting edge radius: 0.2 mm Relief/clearance angle: 11° Included angle: 80° Manufacturer article number: 6998443 Special features ISO designation: CPMT090302 Grade: NS9530 (uncoated cermet, finishing) Chipbreaker: one‑sided Plate shape: rhombic Hole: with cylindrical hole + single‑side countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert best suited for? The CPMT090302 NS9530 insert is a finishing grade optimised for steel; the uncoated cermet NS9530 offers a sharp edge and low cutting forces for high‑quality turned surfaces. Can this insert be used for both external and internal turning? Yes, the ISO‑standard CPMT090302 geometry is suitable for external and internal turning when paired with a compatible external holder or boring bar and the correct clamping set. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm radius provides a defined cutting edge that reduces burrs and improves surface texture during finishing passes, supporting consistent part tolerances and reduced secondary operations. What role does the chipbreaker play in finishing operations? The one‑sided chipbreaker is designed to produce short, controllable chips, lowering cutting forces and heat generation which contributes to process stability and better surface quality. Is the insert compatible with standard ISO toolholders? The insert follows ISO geometry conventions (CPMT090302) and is compatible with holders that match its form, clearance angle, tolerance class, fastening and thickness; verification of holder compatibility is recommended before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090302 NS9530 Wendeplatten - Tungaloy
High surface quality and reduced cutting forces result in consistent finishing performance; the ISO compatibility simplifies holder selection for a reliable turning process. Order the CPMT090302 NS9530 insert via Metav Werkzeuge or contact our consultants for application advice. CPMT 090302 NS9530 — Tungaloy turning indexable insert, uncoated cermet for fine finishing The CPMT090302 NS9530 is a rhombic ISO turning insert designed for finishing operations on steel, optimised for continuous cuts and small depths of cut. Sharp cutting edge for superior surface finish Uncoated cermet grade NS9530 for fine finishing ISO rhombic 09 shape with 80° cutting angle Compatible with ISO turning holders Precision finishing with low cutting forces The insert combines an uncoated cermet grade with a sharp cutting edge, delivering low cutting forces and excellent surface quality on steel. Cermet is a ceramic–metal composite that maintains edge sharpness longer than many carbides in finishing passes; this reduces vibration and improves part tolerances. For continuous feeding and small step-over values the result is a measurable improvement in surface roughness and reduced need for secondary operations, making it a cost-effective choice for high-volume finishing. Clear mounting parameters for reliable toolholding Compatibility with toolholders follows ISO principles: form, free angle, tolerance class, fastening, size and thickness determine fit. The insert’s 11° relief angle and 80° cutting angle are specified to match standard ISO holders for rhombic plates, while the cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating. Specifying these parameters avoids misfits and supports fast indexable changeovers, reducing machine downtime and increasing process security. Application guidance and operational benefits Designed for external and internal turning, this grade is particularly suited to continuous cuts and finishing passes on steel where surface integrity matters. The 0.2 mm corner radius balances edge strength with fine profile reproduction, and the 3.18 mm plate thickness contributes to operational stability under light to moderate cutting forces. The integrated single-sided chipbreaker assists chip control in predictable cutting regimes, reducing the risk of built-up edge and supporting consistent cycle times. For finishing tasks that demand consistent surface quality, rely on the Tungaloy NS9530 grade — contact Metav Werkzeuge for tailored cutting data and ordering assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6998445 SKU: 6998445-Tungaloy Manufacturer SKU: TUN6998445 Model series: ISO-Drehwendeschneidplatten Designation: CPMT090302 Numbers / Core technical data Corner radius: 0.2 mm Cutting angle: 80° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 09 Designs / Special features Material: carbide (substrate) Grade: NS9530 (uncoated cermet) Shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink 40°–60° Application: turning (external and internal); finishing on steel FAQ Which materials is this insert intended for? The CPMT090302 NS9530 is formulated as a finishing grade for steel, offering low cutting forces and a sharp edge suitable for high-quality surface results. Can the insert be used for internal turning operations? Yes, the rhombic geometry and secure hole clamping make the insert suitable for both external and internal turning when matched with the correct ISO holder. Is the grade coated or uncoated, and what are the benefits? This Tungaloy grade is an uncoated cermet; the advantage is a consistently sharp edge and improved surface finish in finishing applications where coating-related edge build-up is a concern. How should the toolholder be selected for reliable performance? Select a holder that matches the ISO form, 11° relief angle, tolerance class, fastening method, size and thickness; correct matching ensures repeatable seating and clamping stability. What role does the 0.2 mm corner radius play in finishing? A 0.2 mm radius provides a balance between edge strength and fine profile reproduction, improving surface integrity while limiting tool deflection in light finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH6225 Wendeplatten - Tungaloy
Taking advantage of a universal PVD‑coated carbide grade optimised for stainless steels and a compact ISO rhombic geometry ensures reliable medium‑duty turning with a sharp, stable cutting edge; order the CPMT090304 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT090304 AH6225 Tungaloy turning insert — ISO rhombic turning insert, PVD‑coated carbide A CPMT090304 AH6225 insert designed for ISO‑standard external and internal turning, offering a sharp and stable cutting edge for medium machining of stainless steels. ISO rhombic turning insert CPMT 090304 AH6225 PVD-coated carbide for stainless steels 11° relief angle with 0.4 mm corner radius Central hole with single-sided countersink Reliable cutting performance for medium turning The PVD‑coated carbide grade AH6225 delivers a balanced combination of edge sharpness and toughness, making it suitable for variable conditions encountered in stainless steel turning. The thin PVD layer improves wear resistance without sacrificing the initial sharpness needed for consistent chip formation; this results in longer effective tool life and fewer insert changes, which supports steady production and reduced downtime. Interchangeability and holder compatibility explained As an ISO‑standard insert, compatibility with a toolholder is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness. The rhombic geometry and ISO designation ensure straightforward replacement in holders that accept CPMT‑type inserts. The insert’s central hole with a cylindrical bore and single‑sided countersink (40°–60°) facilitates secure clamping and consistent seating in compatible holders, improving repeatability across tool changes. Geometry that balances surface finish and edge strength The 0.4 mm corner radius and 11° relief angle are chosen to balance surface quality and cutting edge robustness. A small corner radius assists in achieving finer surface finishes in medium cutting operations, while still providing sufficient edge support to withstand intermittent cutting forces. For applications where higher strength is required, this geometry ensures predictable chip formation when paired with the one‑sided chipbreaker. Practical application and system setup Typical uses include external and internal turning operations on stainless steels; select the chipbreaker and grade variant according to workpiece material, machining strategy and machine stability. The system usually comprises the ISO insert, a matched external holder or boring bar, an underlay/clamping kit and replacement screws. Choosing the correct holder form and tolerance class is essential to exploit the insert’s performance and to maintain process stability. Simple-to-understand technical benefits ISO standardisation means easy inventory management and interchangeability across machines. The PVD coating reduces friction and enhances wear resistance, the carbide substrate provides the core toughness, and the one‑sided chipbreaker helps control swarf in many turning scenarios. These combined features support efficient production, predictable tool life and repeatable part quality. Contact Metav Werkzeuge for tailored recommendations on holders and matching tooling for the Tungaloy AH6225 insert — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6829423 SKU: 6829423-Tungaloy Manufacturer article number: TUN6829423 Facts Corner radius: 0.4 mm Relief angle: 11° Thickness: 3.18 mm Size: 09 Included angle: 80° Special features ISO designation: CPMT090304 Grade/coating: AH6225, PVD‑coated carbide Plate shape: rhombic Chipbreaker: one‑sided Hole: cylindrical hole with single‑sided countersink (40°–60°) Application: turning Series: ISO turning inserts FAQ What materials is this insert suited for? The CPMT090304 AH6225 insert is a universal grade optimised for stainless steels and is intended primarily for medium turning tasks in such materials. Can this insert be used for both external and internal turning? Yes, the ISO‑standard CPMT geometry and the one‑sided chipbreaker make the insert suitable for both external and internal turning when paired with the correct holder. How is holder compatibility determined for this insert? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; these factors ensure correct seating and secure clamping in a compatible external holder or boring bar. What does the 0.4 mm corner radius mean for machining results? A 0.4 mm corner radius offers a compromise between surface finish and edge strength: it supports finer finishes in medium cutting while providing sufficient edge support against vibration and interrupted cuts. What is the purpose of the central hole and countersink? The central cylindrical hole with a single‑sided countersink (40°–60°) facilitates secure fastening and consistent repeatability in clamping, improving positional stability across insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade designed for stainless steel turning, a precise 0.4 mm corner radius and ISO compatibility to maintain consistent productivity on mixed-production runs; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. CPMT090304 AH6225 Tungaloy insert — PVD-coated carbide, 0.4 mm radius for turning The CPMT090304 AH6225 is an ISO-standard rhombic turning insert engineered for reliable external and internal turning of stainless steels under varying conditions. ISO-standard rhombic insert PVD-coated carbide grade AH6225 0.4 mm corner radius Designed for stainless steel turning Consistent edge stability for mixed stainless-steel work The PVD-coated carbide grade AH6225 delivers a balance of sharpness and robustness that suits medium cutting conditions; the coating improves wear resistance while the substrate maintains a stable cutting edge. This results in predictable tool life and reduced variability in batch production, translating to fewer tool changes and less downtime. The combination of substrate and coating supports both finish and semi-finishing operations on stainless steels, helping maintain dimensional accuracy and surface quality across workpieces. Precise geometry for predictable chip control and clamping With a 0.4 mm corner radius and a 11° clearance angle, the insert geometry is tailored to provide reliable cutting forces and chip formation in turning operations. The rhombic plate form and the cylindrical hole with single-sided countersink (40°–60°) ensure secure seating in compatible holders and accurate repeatability during index changes. Selecting the correct single-sided chipbreaker further refines chip form for the chosen feed and depth of cut, improving process stability and reducing the risk of built-up edge formation. System compatibility and simple selection for efficient workflow As an ISO-standard insert, this plate integrates into established toolholder systems; compatibility depends on form, clearance, tolerance class, fastening and plate dimensions. The plate thickness of 3.18 mm and the size designation 09 align with common outside holders and boring bars, allowing straightforward replacement without extensive adapter inventories. For workshops running mixed materials, choosing this grade simplifies tooling logistics while keeping cutting performance consistent across shifts. Choose the Tungaloy AH6225 grade for dependable stainless-steel turning and contact Metav Werkzeuge for tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6829382 Manufacturer SKU: TUN6829382 SKU: 6829382-Tungaloy Model series: ISO turning indexable inserts Facts Size designation: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° ISO code: 090304 Special features PVD-coated carbide grade AH6225 Rhombic plate shape Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Intended for stainless steel turning Suitable for external and internal turning ISO-standard indexable insert CPMT090304 FAQ What materials is this insert best suited for? The CPMT090304 AH6225 insert is optimised for stainless steels, providing a balance of edge sharpness and wear resistance for medium cutting conditions. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength for interrupted cuts and contributes to consistent surface finish; the CPMT090304 geometry supports stable cutting forces and predictable results. Is this insert compatible with standard ISO holders? Yes; the CPMT090304 is an ISO-standard rhombic insert and will fit holders designed for size 09 plates with a 3.18 mm thickness and the specified hole and countersink style. What role does the AH6225 grade play in tool life? The AH6225 PVD-coated carbide grade offers a compromise between wear resistance and edge sharpness, helping to extend tool life during variable stainless-steel turning while maintaining surface quality. Can the chipbreaker be adapted for finishing or roughing? The single-sided chipbreaker on this insert can be matched to the specific feed and depth of cut; choosing the appropriate breaker tailors chip formation for either finishing or more productive roughing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 carbide, robust corner geometry and ISO compatibility for reliable turning of rostfreier Stahl; order directly via Metav Werkzeuge or contact our consultants for application support. CPMT 090304 AH6235 Tungaloy indexable insert for turning — PVD-coated carbide, 11° clearance The CPMT090304 AH6235 is an ISO rhombic indexable insert intended for external and internal turning, optimised for rostfreier Stahl and interrupted cuts. PVD-coated carbide AH6235 Optimised for rostfreier Stahl Rhombic 09 format, 11° clearance Cylindrical hole with 40°–60° countersink Consistent chip control for demanding stainless applications The combination of the AH6235 PVD coating and a tougher carbide substrate delivers stable chip formation when machining rostfreier Stahl and materials prone to built-up edge. The single-sided chipbreaker geometry reduces the risk of unpredictable breakouts during interrupted cuts, so the process remains stable even under fluctuating cutting conditions. As a result, machining cycles show improved consistency and fewer interruptions, contributing to steady production rates. Precision geometry that protects the cutting edge and surface finish The rhombic 09 format with a 0.4 mm corner radius provides a balanced compromise between edge strength and surface quality. The 11° relief angle helps maintain a defined cutting edge engagement, while the insert thickness of 3.18 mm supports torsional stability in slender holders. Together, these geometric parameters reduce vibration and protect the cutting edge, allowing for repeatable dimensional accuracy and an improved workpiece surface without frequent tool changes. ISO compatibility for straightforward toolholder selection This insert conforms to ISO specifications for turning inserts, so compatibility with holders is governed by shape, relief angle, tolerance class, fastening, size and thickness. The centre cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and simple replacement with standard screws and clamping sets. For workshops aiming to streamline tool logistics, the standardised form factor simplifies spare-part management and reduces set-up time at the machine. Robust material and coating combination for extended tool life The tougher grade of the AH6235 series is selected specifically for applications with higher breakout risk and for cutting rostfreier Stahl; the PVD-coated carbide resists adhesion and thermal softening while maintaining edge integrity. This translates into longer effective tool life under disturbed cutting conditions and less frequent index changes, delivering measurable throughput improvements and reducing downtime in serial production. For dependable turning of rostfreier Stahl choose the Tungaloy CPMT090304 AH6235 PVD-coated insert — contact Metav Werkzeuge for expert advice and to secure suitable stocking and delivery at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6890167 Manufacturer SKU: TUN6890167 Supplier SKU: 6890167-Tungaloy Model series: ISO turning indexable inserts Designation: CPMT090304 AH6235 Core data Format: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Insert angle: 80° Special features Material: carbide (Hartmetall) Coating: PVD, grade AH6235 Shape: rhombic Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning; suitable for interrupted cuts and rostfreier Stahl Compatibility: ISO-normed insert for standard holders, clamping sets and screws FAQ What materials is this insert designed for? The CPMT090304 AH6235 insert is designed primarily for rostfreier Stahl and other applications with increased breakout risk, using its tougher PVD-coated carbide to maintain edge stability. How does the AH6235 grade improve performance? The AH6235 PVD coating on a tougher carbide substrate improves resistance to adhesion and sudden edge chipping, enabling more stable machining during interrupted cuts and better tool life. Is the CPMT090304 compatible with standard ISO holders? Yes. The CPMT090304 follows ISO dimensions; compatibility depends on shape, relief angle, tolerance class, fastening method, size and thickness of the holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH6235, a 0.4 mm nose radius and ISO compatibility for consistent turning performance; the tougher grade reduces chipping in interrupted cuts while the rhombic geometry ensures versatile engagement. Order the insert directly via Metav Werkzeuge or consult our specialists if application advice is required. CPMT 090304 AH6235 Tungaloy turning insert — PVD‑coated carbide, 0.4 mm radius CPMT090304 AH6235 is a rhombic indexable insert designed for precision turning in a wide range of industrial applications, particularly where interrupted cuts and stainless steel machining demand a tougher grade. PVD-coated carbide AH6235 for stainless steel machining Rhombic CPMT geometry 80° for versatile turning 0.4 mm nose radius for precision finishing Tough grade for demanding stainless steel and interrupted machining The PVD-coated carbide grade AH6235 has been developed for increased toughness, making it suitable for the elevated breakout risk associated with machining stainless steel and interrupted cuts. The deposit layer improves resistance to built-up edge while the substrate material maintains edge stability under variable cutting forces. This results in fewer unplanned tool changes and more predictable production cycles, which supports higher throughput and lower scrap rates. Geometry and dimensions that simplify holder selection and repeatability Designed to the ISO CPMT090304 specification, the insert features a rhombic form with an 80° approach angle and 11° clearance. The 0.4 mm corner radius and 3.18 mm thickness provide a balance between accuracy and robustness for both finishing and light roughing. Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so correct matching ensures secure clamping and repeatable results with minimal setup time. Practical chip control and system integration for shopfloor efficiency A one-sided chipbreaker and the centre cylindrical hole with a single-sided countersink (40°–60°) support consistent chip formation and evacuation in many turning scenarios. The insert is intended to be used as part of a system comprising the indexable insert, appropriate external holder or boring bar, shim/clamping set and spare screws, enabling quick replacement and reduced downtime. Improved chip control and the tougher grade together contribute to prolonged tool life and steadier surface finishes. For tailored cutting data, genuine Tungaloy inserts and fast delivery, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss application requirements and stock availability. Technical data Article number: 6890168 Manufacturer article number: 6890168 Manufacturer SKU: TUN6890168 SKU: 6890168-Tungaloy Designation: CPMT090304 AH6235 Manufacturer: Tungaloy Core data Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Approach angle: 80° Hole: with hole, cylindrical + one-sided countersink 40°–60° Features Material: carbide Coating: PVD Grade: AH6235 Shape: rhombic Chipbreaker: one-sided ISO designation: CPMT090304 Suitable for stainless steel and interrupted cuts System components: insert + holder + shim/clamping set + spare screws FAQ What materials is this insert optimised for? The CPMT090304 AH6235 insert is optimised for stainless steel and performs well in applications with interrupted cuts or elevated breakout risk. Which toolholders are compatible with this geometry? Compatibility is achieved with holders designed for the CPMT form; the holder must match the insert form, clearance angle, tolerance class, fastening type, size and thickness for secure clamping and repeatable results. What is the nose radius and how is it used? The corner radius is 0.4 mm, suitable for precision finishing and controlled light roughing where fine surface quality is required. How does the coating and grade affect performance? The PVD-coated AH6235 grade provides enhanced toughness and edge stability, reducing the likelihood of chipping and supporting consistent chip control in demanding workpieces. Can the insert be used for internal and external turning? Yes; the insert is suitable for both external and internal turning when paired with the correct external holder or boring bar and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH6235 and ISO conformity to improve productivity in rotable turning operations; the robust 0.4 mm corner radius and single-sided chipbreaker give reliable edge security in interrupted cuts. Order directly via Metav Werkzeuge or request technical consultation for application-specific recommendations. CPMT 090304 AH6235 ISO turning insert for stainless steel — Tungaloy CPMT 090304 AH6235 is an ISO-format indexable turning insert suited to external and internal turning, particularly for stainless steels and interrupted cuts. ISO rhombic insert CPMT 090304 PVD-coated carbide grade AH6235 Designed for stainless steel and interrupted cuts 0.4 mm corner radius, 11° relief angle Consistent cutting with a tougher PVD-coated grade The PVD-coated AH6235 carbide delivers a balance of toughness and wear resistance that is tailored for machining stainless steel and operations with interrupted cuts. The PVD coating improves adhesion and thermal stability at the cutting edge, reducing crater wear and extending usable life compared with uncoated grades. For process planners, this means fewer insert changes and more predictable tool life under variable cutting loads, which supports higher machine utilisation. Secure seating and repeatability for reliable setups Built to ISO dimensions, the CPMT 090304 format ensures compatibility with a wide range of external holders and boring bars; fit depends on form, relief angle and tolerance class. The rhombic geometry and cylindrical hole with single-sided countersink (40°–60°) provide precise location and repeatable clamping, while the 3.18 mm plate thickness and 11° relief angle contribute to stable cutting conditions. Clear standardisation of locating features reduces set-up time and minimises indexing errors in serial production. Edge strength and chip control that maintain surface quality A 0.4 mm corner radius enhances edge resistance to chipping and improves robustness during interrupted cuts, while the single-sided chipbreaker is designed to guide chips away from the component and the toolpath. The result is consistent surface finish and fewer workpiece rejections in short-chipping alloys. The combination of geometry and grade supports both finishing passes and light roughing where controlled chip flow and edge security are priorities, helping to increase throughput with stable results. Contact Metav Werkzeuge for application-specific advice and to place orders for this Tungaloy AH6235 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical support and availability. Technical Data Article number: 6890171 Manufacturer SKU: TUN6890171 Seller SKU: 6890171-Tungaloy Model series: ISO turning indexable inserts Core dimensions ISO designation: 090304 Insert size: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Features & materials Grade/coating: AH6235, PVD-coated carbide Shape: rhombic Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning; suitable for stainless steel and interrupted cuts FAQ What materials is this insert suitable for? The AH6235 PVD-coated carbide is formulated for stainless steel machining and performs well in interrupted cuts and situations with increased breakout risk. How does the insert locate in a holder? The rhombic CPMT 090304 format uses a cylindrical hole with a single-sided countersink; this provides precise seating and repeatable clamping in compatible ISO holders. What benefits does the 0.4 mm corner radius provide? A 0.4 mm radius increases edge strength and reduces the likelihood of chipping during interrupted cuts, improving process stability and surface quality. Is this insert suitable for internal and external turning? Yes, the ISO rhombic design and standard dimensions allow use in both external holders and suitable bore bars for internal turning operations. Which chip control features are included? The insert is equipped with a single-sided chipbreaker to promote controlled chip flow and prevent accumulation near the cutting zone. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH725 Wendeplatten - Tungaloy
Benefit from a versatile, PVD-coated carbide grade and a precise 0.4 mm nose radius that together deliver stable chip control and high process security for turning operations; order directly via Metav Werkzeuge or consult the team for application advice. CPMT090304 AH725 Tungaloy – ISO rhombic turning insert for turning (Drehen) The CPMT090304 AH725 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering a universal, breakage-resistant PVD-coated carbide grade suited to varying workpiece materials and demanding process conditions. ISO rhombic insert CPMT090304 PVD-coated AH725 carbide grade For external and internal turning of Stahl and rostfreier Stahl Single-sided chipbreaker, with central hole Reliable machining performance and process security The combination of a PVD-coated AH725 carbide grade with a 0.4 mm nose radius supports repeatable cutting performance and extended edge life in a wide range of turning tasks. The coating improves wear resistance while the substrate provides toughness; this balance reduces flank wear and minimises unexpected edge failures. For operations where consistent output and reduced rework are priorities, the insert’s design leads to improved uptime and predictable tool-change intervals. Versatility across materials with controlled chip formation Designed as a universal, out‑break‑resistant grade, the insert handles mixed production runs involving Stahl and rostfreier Stahl without frequent tool swaps. The one-sided chipbreaker promotes defined chip geometry for stable evacuation in both external and internal turning. Explained simply: the chipbreaker guides chips away from the cutting zone, lowering heat concentration and supporting safer, more efficient cycles on conventional and CNC lathes. Practical compatibility and straightforward tool integration The insert conforms to ISO geometry so compatibility with appropriate holders is determined by form, relief angle, tolerance class, fastening, size and thickness. The rhombic form and central hole with a single-side countersink (40°–60°) enable secure clamping, while the 11° relief angle and 80° corner angle suit a wide variety of toolholders. This makes toolset planning simpler and reduces inventory complexity for production shops seeking modular, mix‑and‑match tooling solutions. Shop-floor benefits that matter to production By choosing an insert tailored for process security and a broad material spectrum, shops benefit from fewer interruptions, improved surface finish consistency and reduced overall tooling costs per part. The insert’s construction and chip control contribute to safer machining and more predictable cycle times. For facilities aiming to standardise on robust, universally applicable inserts, this option supports higher productivity and streamlined tool management. Contact Metav Werkzeuge for technical consultation and availability of the CPMT090304 AH725 Tungaloy insert; phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific turning applications Technical data SKU: 6865366-Tungaloy Manufacturer SKU: TUN6865366 Manufacturer article number: 6865366 Model series: ISO-Drehwendeschneidplatten Application: Drehen Facts ISO code: 090304 Insert designation: CPMT090304 Nose radius: 0.4 mm Relief angle: 11° Corner angle: 80° Thickness: 3.18 mm Size: 09 Special features Grade: AH725 (PVD-coated carbide) Material: carbide Chipbreaker: one-sided Hole style: cylindrical hole with single-side countersink (40°–60°) Shape: rhombic Suitable for: Stahl and rostfreier Stahl Typical use: external and internal turning Compatibility: ISO holder dependent on form, relief angle, tolerance class, fastening, size, thickness FAQ Is this insert suitable for machining stainless materials? The CPMT090304 AH725 insert is suitable for rostfreier Stahl; the AH725 grade provides a balance of toughness and wear resistance recommended for mixed Stahl and rostfreier Stahl production. What advantages does the AH725 grade offer? AH725 is a PVD‑coated carbide grade designed for universal, breakage‑resistant performance, giving good edge stability and consistent results across varying turning tasks. Can the insert be used for both external and internal turning? Yes, the rhombic CPMT090304 geometry and one-sided chipbreaker make the insert appropriate for both external and internal turning operations when matched with the correct holder. How does the central hole and countersink affect clamping? The cylindrical hole with a single-side countersink (40°–60°) enables secure mechanical fastening and correct seat positioning in compatible ISO toolholders, enhancing repeatability. Which toolholder factors must be checked for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; matching these with the CPMT090304 specification ensures correct seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH725 carbide grade, ISO‑standard CPMT geometry and a fine 0.4 mm corner radius to secure consistent turning results across varied steels and rostfreier Stahl; order the insert via Metav Werkzeuge or consult our specialists for application advice. CPMT 090304 AH725 indexable turning insert — PVD‑coated carbide, 0.4 mm radius (Tungaloy) The CPMT 090304 AH725 is an ISO‑standard indexable insert engineered for external and internal turning operations, offering a universal, fracture‑resistant grade suitable for mixed‑material production where process stability is prioritised. ISO‑standard CPMT geometry PVD‑coated AH725 carbide grade 0.4 mm corner radius for fine profiles 11° clearance angle for secure cutting Rhombic 09 form with central hole Consistent performance for mixed‑material turning The PVD‑coated carbide AH725 provides a balance between toughness and wear resistance that is beneficial when machining both steel and rostfreier Stahl. The coating enhances surface hardness and reduces adhesion, which translates into longer edge life and fewer unexpected tool changes. For shops processing batches with varying workpiece materials, this grade reduces the need for frequent insert swaps, supporting a more continuous production flow and predictable cycle times. The combination of substrate and coating is explained here so that non‑specialists understand: PVD (Physical Vapour Deposition) forms a thin, wear‑resistant layer on the carbide that limits flank wear and helps maintain dimensional accuracy over multiple parts. Fast indexability and secure clamping for uptime gains Designed to ISO dimensions, the insert matches standard CPMT holders and clamping systems when form, relief angle, tolerance class, fixing method, size and thickness align. The 0.4 mm corner radius and 11° clearance angle are optimised for medium‑finishing passes, producing a reliable surface finish while limiting cutting forces. The central hole with a cylindrical seat and one‑sided countersink (40°–60°) ensures repeatable seating and fast index changes, which reduces machine downtime. Compatibility with standard toolholders also simplifies tool management and inventory, helping maintenance and production planners keep tool cupboards lean. Improved chip control and process security during turning The insert’s single‑sided chipbreaker is tuned for controlled chip formation in turning tasks, supporting continuous chips on long parts and predictable breakage in interrupted cuts. Controlled chip flow lowers the risk of rework and tool interference, especially when working with long or thin components. The AH725 grade is pitched as a universal, anti‑chip‑break grade that emphasises process security, making it especially useful in batch production or mixed‑material runs where consistent performance is critical rather than maximising single‑cut metal removal rates. For reliable, application‑oriented tooling based on Tungaloy’s AH725 grade, contact Metav Werkzeuge to discuss suitability for specific turning tasks or to request the CPMT 090304 AH725 indexable insert via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6856705 Manufacturer SKU: TUN6856705 Manufacturer item number: 6856705 Facts Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Size: 09 ISO designation: 090304 Special features ISO‑standard indexable turning insert Grade: AH725 (PVD‑coated) Substrate: carbide Shape: rhombic Form: CPMT090304 With central hole Cylindrical hole + one‑sided countersink (40°–60°) Single‑sided chipbreaker Application: Turning Compatibility: ISO holders (form, relief, tolerance, fixing, size, thickness) FAQ What materials is this insert suited for? The CPMT 090304 AH725 insert is designed mainly for steel and rostfreier Stahl applications; the AH725 grade provides universal, fracture‑resistant performance for mixed material runs. How does the AH725 grade affect tool life? AH725’s PVD coating and carbide substrate combine to reduce flank wear and improve edge stability, extending the effective life of the CPMT 090304 insert under typical turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on matching the ISO CPMT form, relief/freiwinkel (11°), tolerance class, fixing method, size (09) and plate thickness (3.18 mm); the insert fits standard CPMT holders that meet these parameters. What chip control can be expected from the single‑sided chipbreaker? The single‑sided chipbreaker on this insert promotes controlled chip formation for turning, improving process security and reducing the likelihood of problematic chip behaviour on long parts. Is this insert suitable for internal as well as external turning? Yes, the CPMT 090304 AH725 is specified for both external and internal turning tasks when the holder and machining setup are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090304 AH725 Wendeplatten - Tungaloy
Combine the universality of the AH725 grade with a PVD‑coated carbide substrate and ISO‑standard rhombic geometry to secure stable chip formation and reliable turning results. Order the CPMT090304 AH725 Tungaloy insert directly via Metav Werkzeuge or contact our consultants for tailored machining advice. CPMT090304 AH725 – CPMT turning insert (ISO) by Tungaloy CPMT090304 AH725 is an ISO‑standard rhombic insert for external and internal turning, providing an 11° clearance and a single‑sided chipbreaker for dependable performance on steel and stainless steels Universal AH725 grade for steel and stainless steels PVD-coated carbide for stable edge life Rhombic ISO insert, 11° clearance, 0.4 mm radius Central hole with cylindrical seat and countersink Reliable edge life and consistent chip control for mixed workshops The PVD-coated AH725 grade combines a wear‑resistant coating with a tough carbide substrate to deliver a balance between tool life and fracture resistance. The result is stable chip formation across a broad range of steels and stainless steels, which reduces the risk of unexpected insert failure in mixed‑material production. For small‑diameter tools or applications with high demands on process security, this combination helps maintain cutting edge integrity and consistent component quality. The coating also improves resistance to built‑up edge and oxidation at elevated cutting temperatures. Seamless integration into ISO toolholder systems for fast changeovers Designed as an ISO‑standard rhombic insert, the geometry and mounting features ensure straightforward compatibility with matching external holders and boring bars. Key locating parameters—form, clearance angle, tolerance class, fastening method, size and thickness—determine holder fit; the CPMT090304 uses an 11° clearance and a 0.4 mm corner radius to suit a variety of finishing and medium‑cut turning tasks. The central cylindrical hole with a one‑sided countersink provides positive seating and repeatable clamping, simplifying insert indexing and reducing setup time in multi‑station operations. Improved productivity and surface finish with focused application choice When the correct chipbreaker and grade are selected to match the workpiece and cutting conditions, this insert contributes to higher productivity and better surface quality. The single‑sided chipbreaker is optimised for controlled swarf flow in common turning operations, which can lower the need for secondary finishing. Selecting the AH725 grade for intermittent or mixed‑material work supports lengthened intervals between insert changes, thereby decreasing machine downtime and total cutting cost per part. For complex requirements, Metav Werkzeuge can advise on the ideal chipbreaker and cutting parameters to maximise output. For personalised selection advice, holder compatibility checks or ordering assistance for the CPMT090304 AH725 Tungaloy turning insert, contact Metav Werkzeuge — our technical team is ready to support process optimisation and tool matching. Technical data Article number: 6856774 Manufacturer SKU: TUN6856774 SKU: 6856774-Tungaloy Brand: Tungaloy Designation: CPMT090304 AH725 Numbers / Core technical data Insert size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Designs / Special features Grade/coating: AH725, PVD coating Material: Carbide Shape: Rhombic Chipbreaker: Single-sided Hole style: Cylindrical hole with one-sided countersink (40°–60°) Application: Turning (external and internal) Model series: ISO indexable turning inserts (ISO‑standard) FAQ Is the insert suitable for stainless steel machining? The CPMT090304 AH725 insert is a PVD‑coated carbide cutting grade engineered for reliable performance on both steels and stainless steels, offering improved resistance to built‑up edge and consistent chip control under varying conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness; the ISO designation and rhombic geometry of the CPMT090304 AH725 enable use in matching ISO toolholders and boring bars that accept size 09, 3.18 mm thick inserts. Can this insert be used for internal turning or only external turning? The CPMT090304 AH725 is suitable for both external and internal turning operations; correct holder choice and appropriate chipbreaker selection ensure process stability for bore machining as well as external passes. What advantages does the AH725 grade provide in a production environment? AH725 delivers a universal, fracture‑resistant performance on a wide range of steels and stainless steels; it is particularly useful where materials change frequently or where small tools and high process security are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 wear resistance, the 0.4 mm corner radius for improved surface finish, and ISO compatibility for reliable turning processes; order the insert through Metav Werkzeuge or consult our technical team for application-specific advice. CPMT 090304 AH725 — ISO indexable turning insert, 0.4 mm radius by Tungaloy A CPMT090304 AH725 indexable insert engineered for ISO-compliant external and internal turning, offering a universal, outchip-resistant PVD-coated carbide grade optimised for steel and stainless steels ISO-compliant rhombic insert, 09 size PVD-coated AH725 grade for steels 0.4 mm corner radius for fine finishes Compatible with cylindrical hole clamping Increased process security for mixed-material turning The PVD-coated AH725 carbide grade delivers a balanced combination of toughness and wear resistance, making it suitable for a wide range of steels and stainless steels. This universality reduces the need for frequent insert changes when workpiece materials vary, improving uptime and consistent cycle times. The grade is designed to maintain stable chip formation and minimise unexpected edge breakouts, supporting predictable production results and lowered scrap rates. Geometry that improves surface quality and edge life With a 0.4 mm corner radius and an 11° relief angle, the rhombic geometry provides a compromise between cutting-edge strength and the ability to achieve fine surface finishes on finishing passes. The rhombic form and 3.18 mm thickness supply sufficient support for interrupted cuts while the modest corner radius helps avoid excessive tool engagement at low feeds, which benefits both dimensional accuracy and tool life. These geometric features translate directly into fewer rework cycles and more consistent part quality. System compatibility for straightforward tool changes The insert follows the ISO specification and features a cylindrical hole with a single-sided countersink (40°–60°), ensuring compatibility with common holders and clamping systems. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; selecting the correct holder and clamp reduces setup time and secures a repeatable clamping position. The insert’s design supports quick indexing and replacement, which helps to keep machines running and reduces non-productive time during tool changes. Practical advantages for turning operations and productivity Intended for both external and internal turning, the insert’s one-sided chipbreaker is matched to applications where controlled chip formation and process stability are priorities. For small tools or operations with varying materials, the AH725 grade offers a reliable balance of edge robustness and wear resistance, often extending the interval between tool changes. The result is a measurable improvement in machining throughput and a reduction in downtime related to tooling, contributing to overall cost-efficiency in component production. For application advice, technical data sheets or to request a tailored recommendation for the CPMT 090304 AH725 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and our consultants will provide expert support. Technical data Article number: 6864983-Tungaloy Manufacturer SKU: TUN6864983 Manufacturer item number: 6864983 Brand: Tungaloy Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° ISO designation: 090304 Special features Material: carbide Coating: PVD Grade: AH725 Plate form: rhombic Hole: with cylindrical hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning Model series: ISO turning inserts FAQ Is the CPMT090304 AH725 suitable for stainless steels? Yes. The CPMT090304 AH725 turning insert from Tungaloy (SKU 6864983-Tungaloy) is a PVD-coated carbide grade intended for both steel and stainless steels and is designed to provide stable chip formation in mixed-material production. Which geometry features help achieve a fine surface finish? The rhombic form of the CPMT090304 AH725, combined with a 0.4 mm corner radius and an 11° relief angle, supports improved surface quality while maintaining sufficient edge strength for finishing passes. What clamping systems are compatible with this insert? The CPMT090304 AH725 uses a cylindrical hole with a single-sided countersink (40°–60°), making it compatible with standard ISO insert clamping systems; exact holder compatibility depends on form, tolerance class and fastening method. Can the insert be used for both internal and external turning operations? Yes. The design and chipbreaker of the CPMT090304 AH725 turning insert are suitable for a variety of internal and external turning tasks, offering reliable edge performance across those applications. What are the practical benefits of the AH725 grade for production runs? The AH725 PVD-coated grade enhances process security through good resistance to chipping and broad material applicability, which helps extend tool life and reduce tool-change-related downtime when using the CPMT090304 AH725 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 AT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet cutting grade (AT9530) combined with a fine 0.4 mm nose radius for consistently high surface quality and predictable wear life; the insert’s ISO geometry and standard mounting hole ensure compatibility with common turning holders. Order directly via Metav Werkzeuge or consult our specialists for grade selection and cutter setup. CPMT090304 AT9530 Turning insert (CPMT 090304 AT9530) — Tungaloy, coated cermet, 11° clearance The CPMT090304 AT9530 is an ISO‑norm indexable turning insert in rhombic form, designed for finishing and light turning of steel with a focus on superior surface finish and uniform wear. Coated cermet grade AT9530 Optimised for finishing operations ISO rhombic 09 size, 11° clearance Cylindrical hole with single‑side countersink Achieving consistently superior surface finish and wear behaviour The insert’s core advantage is its AT9530 grade: a coated cermet designed for finishing and light turning of steel. The composition and coating combine a low built‑up edge tendency with even abrasive wear, which helps to maintain a fine and repeatable surface finish over longer tool life. With a fine 0.4 mm nose radius the geometry supports delicate profile detail and improved part aesthetics while limiting vibration when run at appropriate feeds and speeds. For operations where part appearance and dimensional stability are priorities, this cutting geometry reduces rework and inspection cycles through predictable performance. Secure seating and straightforward integration into ISO systems Built to ISO standards, the plate’s rhombic form and the mounting arrangement with a cylindrical hole plus single‑side countersink (40°–60°) make it compatible with a wide range of external holders and boring bars that accept 09 size rhombic inserts. The 11° clearance angle reduces rubbing on the flank face and helps preserve the cutting edge under light finishing feeds. When selecting a holder, match form, clearance, tolerance class, fastening method, size and thickness as these determine full compatibility. Correct clamping and the use of the specified washer/klemmsatz and screw torque lead to reliable repeatability and reduced index‑to‑index variance during production. Productivity benefits and choice guidance for finishing steel Choosing a coated cermet like AT9530 for finishing means a balance between high surface quality and tool life: cermets often outperform uncoated carbides in finish turning of steel by resisting built‑up edge and preserving edge form. The one‑sided chipbreaker facilitates predictable chip flow in finishing cuts while avoiding aggressive chip formation that can mar fine surfaces. For stable setups and light depths of cut the insert pays off through fewer tool changes and consistent workpiece quality. When uncertainty exists about grade selection, consult process engineers to match the AT9530 characteristics to the specific steel grade and machining parameters; small adjustments to feed and speed often unlock substantial improvements in finish and life. For tailored grade advice or to source Tungaloy CPMT090304 AT9530 inserts directly from Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt guidance and supply. Technical data Article number: 6773735 SKU: 6773735-Tungaloy Manufacturer SKU: TUN6773735 Facts Size: 09 Thickness: 3.18 mm Clearance angle: 11° Nose radius: 0.4 mm Included angle: 80° Special features Shape: Rhombic Grade/coating: AT9530, coated cermet Chipbreaker: One‑sided Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Application: Turning; ISO‑indexable turning insert Series: ISO turning indexable inserts FAQ Is this insert compatible with standard ISO turning holders? The CPMT090304 AT9530 indexable insert is manufactured to ISO geometry and will fit holders designed for rhombic 09 inserts when form, clearance and thickness are matched; refer to the holder’s specifications for compatible tolerance classes. For which operations is this grade recommended? The AT9530 coated cermet is intended for finishing and light turning of steel; the CPMT090304 insert provides improved surface finish and uniform wear in stable setups and reduced built‑up edge compared with some carbide options. What are the key mounting features to check before use? Ensure the holder accepts the rhombic 09 form, 3.18 mm plate thickness and the with‑hole fastening (cylindrical hole with single‑side countersink); correct clamping and the designated screw/underlay set preserve repeatability and tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear‑resistant GT9530 cermet grade, precise ISO geometry and reliable compatibility for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT090304 GT9530 Tungaloy insert — ISO rhombic turning insert, 0.4 mm radius The CPMT090304 GT9530 is an ISO rhombic turning insert designed for finishing and light universal turning of steel under stable machining conditions. Wear‑resistant GT9530 cermet grade ISO CPMT090304 rhombic form 0.4 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Precision geometry for consistent surface quality The rhombic, ISO‑conforming geometry of this indexable cutting insert ensures a controlled cutting edge and reliable engagement during external and internal turning. With an included angle of 80° and an 11° relief angle, the geometry is optimised to deliver a fine surface finish while reducing cutting forces in stable setups. The 0.4 mm corner radius supports low‑deflection cutting on medium feeds, which helps maintain dimensional accuracy and repeatability on serial parts. Coated cermet grade that extends tool life Equipped with the GT9530 coated cermet grade, the insert combines wear resistance with thermal stability for improved life in finishing operations on steel. The coating and substrate pairing promote stable chip formation and good surface integrity, meaning fewer indexings and reduced downtime. For operations where consistent part appearance and longer tool life are priorities, this grade offers a favourable cost‑to‑performance ratio under steady cutting conditions. Compatibility and system considerations explained Compatibility with toolholders is determined by the insert’s shape, relief angle, tolerance class, fastening method, size and thickness. The CPMT090304 form requires a matching rhombic holder and the standard clamping set (support pad and clamp) with appropriate screws. The insert has a cylindrical central hole with a single‑sided countersink (40°–60°) for secure fastening and accurate positioning, and a thickness of 3.18 mm, ensuring stable locating in most ISO holders. Application guidance and practical benefits This indexable insert is intended primarily for turning applications where a high‑quality finish and extended tool life are needed under stable machining conditions. It is best used as a finishing to light universal grade on steel, with the single‑sided chipbreaker assisting in controlled chip flow for standard depth‑of‑cut scenarios. Selecting the correct chipbreaker and insert grade for the workpiece material and rigidity of the setup will directly influence productivity and part quality. Simple system setup and maintenance advantages The system approach comprises the ISO insert, a compatible external holder or boring bar, a support pad/clamp set and replacement screws. Because insert interchange and indexing are fast, workshop throughput improves and non‑productive time is reduced. The standardised ISO format also simplifies tool inventory management and makes it easier to match inserts across different machines and toolholders. For stable finishing in steel applications, request the Tungaloy GT9530 CPMT090304 insert from Metav Werkzeuge or contact our advisors at Metav Werkzeuge for tailored holder recommendations and application support; eMail: info@metav-werkzeuge.com – Tel: +49 2822 7131930 Technical data Article number: 6998310 Manufacturer SKU: TUN6998310 SKU: 6998310-Tungaloy Material: carbide Model series: ISO‑Drehwendeschneidplatten Label: CPMT090304 GT9530 Tungaloy‑insert Dimensions & geometry Insert designation: CPMT090304 Size: 09 Corner radius: 0.4 mm Thickness: 3.18 mm Relief angle: 11° Included angle: 80° Features & compatibility Coating / grade: GT9530 (coated cermet) Cutting material: carbide substrate with cermet coating Chipbreaker: single‑sided Hole: with central cylindrical hole and one‑sided countersink (40°–60°) Plate form: rhombic Typical application: turning (external and internal) System components: ISO insert, matching holder, support pad/clamp and screws Compatibility criteria: form, relief, tolerance class, fastening, size and thickness determine holder match FAQ What materials is this insert best suited for? The CPMT090304 GT9530 insert is optimised for turning steel, offering finishing to light universal performance when stable machining conditions are maintained. How does the GT9530 grade improve performance? The GT9530 coated cermet combination provides enhanced wear resistance and stable chip formation, extending tool life in finishing applications with consistent results. Which holder features are required for correct mounting? A matching rhombic ISO holder with appropriate clamping geometry and a support pad/clamp set is required; the insert’s cylindrical hole with 40°–60° countersink secures correct positioning. Can this insert be used for roughing operations? The insert is designed primarily for finishing to light universal turning; for heavy roughing, a different geometry and grade engineered for high‑feed or heavy‑cut conditions is recommended. What is the corner radius and how does it affect surface finish? The insert has a 0.4 mm corner radius, which supports a finer surface finish and reduced edge stress at moderate feeds, improving part appearance and dimensional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 GT9530 Wendeplatten - Tungaloy
Benefit from the wear-resistant GT9530 coated cermet grade and precise ISO CPMT geometry for consistent finishing and extended tool life; order inserts directly via Metav Werkzeuge or request application guidance from our specialists. CPMT090304 GT9530 Tungaloy turning insert (coated cermet, 0.4 mm radius) The CPMT090304 GT9530 is an ISO‑standard rhombic turning insert for finishing and light universal turning of steel, engineered for stable setups and reliable surface quality. ISO CPMT 090304 geometry Coated cermet grade GT9530 0.4 mm corner radius for fine finishing Single-sided chipbreaker with 11° relief angle Consistent finishing through a wear-resistant grade The GT9530 coated cermet blend delivers a balance of surface quality and extended tool life, making it suitable for finishing and light universal turning of steel. The microstructure of the grade resists abrasive wear while preserving edge geometry, which reduces rework and helps maintain part tolerances. In practice, this means fewer insert changes in stable machining conditions and more consistent batch-to-batch results, supporting predictable process planning and reduced downtime. Efficiency and stability from ISO-standard geometry Adopting an ISO 090304 CPMT format ensures predictable fitment and repeatable clamping when paired with compatible holders. The rhombic insert form and the included 80° angle create a robust cutting edge for external and internal turning operations. Because compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, using an ISO‑standard insert simplifies tool inventory and reduces setup variation for production environments. Precise edge definition for fine surface finishes The 0.4 mm corner radius provides a compromise between edge strength and fine finishing capability; it supports lower cutting forces yet produces a good surface texture when feeds and speeds are optimised. Coupled with the single-sided chipbreaker, this geometry is aimed at stable cutting scenarios where control of chip formation contributes directly to repeatable surface finish and tool life, especially in finishing passes where dimensional accuracy is critical. Practical mounting and dimensional details that matter Key dimensions influence both mechanical stability and clamping: plate thickness 3.18 mm, the 11° relief (facing) angle and the insert’s included 80° geometry ensure correct seating and force transmission in the toolholder. The insert features a cylindrical hole with a one‑side countersink (40°–60°) to match standard clamping systems, enabling secure fixation and easy replacement without compromise to runout or concentricity. Application guidance and process optimisation This insert excels in external and internal turning where stable fixturing and consistent cutting conditions prevail. Select the GT9530 grade and the single‑side chipbreaker when the priority is surface quality and extended life rather than aggressive metal removal. For roughing operations or unstable setups, consider alternative grades or chipbreaker geometries designed for higher robustness and chip evacuation. For whom this insert is intended Production machinists, toolroom engineers and OEM workshops seeking predictable finishing performance in steel turning will find this insert beneficial. The combination of ISO compatibility, cermet wear characteristics and controlled chip formation supports workflows that demand both dimensional accuracy and long tool life, aiding efficiency in batch production and precision prototyping. Contact Metav Werkzeuge for availability, holder compatibility and application advice on the Tungaloy CPMT090304 GT9530 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998308 Manufacturer SKU: TUN6998308 Brand: Tungaloy Type designation: CPMT090304 Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Plate thickness: 3.18 mm Plate size: 09 Special features Material: carbide Grade/coating: GT9530 (coated cermet) Plate form: rhombic Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning FAQ What materials is this insert designed for? The CPMT090304 GT9530 insert is optimised for steel turning; the GT9530 coated cermet grade provides wear resistance and a good surface finish in stable cutting conditions. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; use holders specified for ISO CPMT 090304 geometry to ensure correct seating for the Tungaloy insert (SKU TUN6998308). How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius balances edge strength and finishing capability, supporting finer surface texture and reduced cutting forces during finishing passes with the GT9530 grade. Is the insert suitable for internal turning? Yes, the rhombic CPMT format and controlled chip formation make it suitable for internal turning where stable access and coolant conditions are available. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090304 GT9530 Wendeplatten - Tungaloy
Combine the GT9530 coated cermet grade with the precise 0.4 mm corner radius and ISO compatibility for reproducible finishing and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT090304 GT9530 — ISO turning indexable insert, coated cermet (Tungaloy) The CPMT090304 GT9530 is a rhombic ISO insert for turning, designed for finishing to light universal operations on steel where excellent surface quality and extended wear resistance are required Coated cermet grade GT9530 Rhombic ISO insert CPMT 090304 0.4 mm corner radius for fine finish Reliable surface finish with wear-resistant grade The combination of a coated cermet cutting material and a small 0.4 mm corner radius delivers consistent surface quality in stable turning setups. The GT9530 grade is formulated for high wear resistance during finishing and light general-purpose cuts in steel; this reduces the frequency of tool changes and helps maintain dimensional consistency across production runs. Where surface integrity is critical, the insert’s geometry and coating work together to lower flank wear and preserve the cutting edge for longer intervals, supporting steady cycle times and predictable component quality. Precise geometry for predictable tool mounting Designed to the ISO turning insert family, the rhombic shape with an 80° included angle and 11° relief ensures compatibility with standard external holders and boring bars. The ISO conformity means that form, relief angle, tolerance class, fastening method, size and thickness determine holder fit; this makes changeovers straightforward and reduces setup time on multi-shift lines. The insert’s cylindrical hole with single-sided countersink (40°–60°) enables secure clamping and stable seating, translating into reduced vibration and improved repeatability in precision turning operations. Chip control and process stability for productive turning A one-sided chipbreaker and the optimised GT9530 composition focus on controlled chip formation under stable cutting conditions, which enhances process reliability and operator safety. In practice, the chip control design supports consistent swarf evacuation and helps avoid re-cutting or surface defects during finishing passes. The 3.18 mm thickness and ISO size designation contribute to mechanical robustness, allowing the insert to withstand moderate cutting forces while preserving the fine edge required for high-quality finishes on steel components. Contact Metav Werkzeuge for availability of the Tungaloy CPMT090304 GT9530 insert and expert application guidance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6998320 Manufacturer SKU: TUN6998320 SKU: 6998320-Tungaloy Model series: ISO turning indexable inserts Brand: Tungaloy Facts Corner radius: 0.4 mm Thickness: 3.18 mm Size: 09 Included angle: 80° Relief angle: 11° Hole style: cylindrical hole with single-sided countersink (40°–60°) Special features Coated cermet grade GT9530 Rhombic insert geometry (CPMT) One-sided chipbreaker ISO-compliant turning insert Material: cemented carbide Application: turning, finishing to light universal cuts on steel Compatible with standard external holders and boring bars FAQ What materials is this insert best suited for? The GT9530-coated cermet is optimised for machining steel in finishing and light universal turning operations; the CPMT090304 insert performs best under stable cutting conditions where surface finish and longer tool life are priorities. Is the insert compatible with standard ISO holders? Yes. The CPMT090304 conforms to ISO turning-insert standards; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness, so it fits standard external holders and boring bars designed for CPMT geometry. How is the insert secured to the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping; this mounting style provides stable seating and supports repeatable positioning during tool changes. Can this insert be used for internal turning as well as external turning? The insert is suitable for both external and internal turning applications, provided the holder and setup meet the ISO specifications and the cutting conditions remain within the stable range recommended for finishing work. What is the article number and manufacturer SKU for ordering? The article number is 6998320 and the manufacturer SKU is TUN6998320 for the Tungaloy CPMT090304 GT9530 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant cermet grade and a secure ISO geometry for consistent finishing and extended tool life in stable turning setups; the coated GT9530 grade combines good surface quality with reliable performance. Order the CPMT090304 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT090304 GT9530 — ISO indexable turning insert by Tungaloy, rhombic 80° with 11° clearance The CPMT090304 GT9530 is an ISO rhombic indexable insert for external and internal turning, designed for finishing and light universal machining of steel. ISO rhombic 80° geometry Coated cermet grade GT9530 Single-sided chipbreaker Cylindrical hole with countersink 40°–60° Consistent, high-quality finishes on steel The coated cermet grade GT9530 is formulated for wear resistance and surface integrity during finishing and light universal operations on steel. Compared with uncoated grades, the substrate and coating combination reduces flank wear and supports longer intervals between index changes, which is particularly beneficial in stable, vibration-minimised setups. The resulting improvement in productivity is measurable as reduced rework and more consistent part tolerances, making this insert suitable where surface finish and repeatability matter. Secure geometry and ISO compatibility for reliable clamping The rhombic 80° form with an 11° clearance angle follows ISO conventions for turning inserts; compatibility with holders depends on form, clearance, tolerance class, fastening and thickness. The presence of a cylindrical hole with a single-sided countersink (40°–60°) ensures tactile, repeatable clamping and straightforward replacement of the indexable plate. Using correctly matched holders and torque settings minimises movement under cutting forces and preserves dimensional accuracy over longer production runs. Efficient chip control and application focus A single-sided chipbreaker on this plate promotes predictable chip flow during finishing cuts and light turning operations, reducing the risk of chip interference and tool nose damage. Cermet substrates tend to offer a smoother cutting edge and resist built-up edge formation, which explains the improved surface quality seen with this grade. Select this insert when process stability is achievable and when the priority is better surface finish and extended tool life rather than heavy roughing cuts. Integrating the insert into production for reduced downtime For the most efficient implementation, pair the plate with ISO-compatible external holders or boring bars and ensure the mounting stack (support, clamp set and replacement screws) matches the plate thickness of 3.18 mm and the hole style. Correct combination of holder stiffness and cutting parameters preserves the GT9530 advantages: consistent results, predictable wear and fewer tool exchanges. If process requirements change, consider alternative chipbreakers or grades matched to higher feed or interrupted cutting conditions. Contact Metav Werkzeuge for application advice and ordering of the CPMT090304 GT9530 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998314 SKU: 6998314-Tungaloy Manufacturer SKU: TUN6998314 Designation: CPMT090304 Facts Corner radius: 0.4 mm Included angle: 80° Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 09 Special features Substrate: coated cermet (GT9530) Plate form: rhombic, 80° included angle Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning; finishing to light universal machining of steel Model series: ISO indexable inserts FAQ What materials is this insert best suited for? The CPMT090304 GT9530 insert is optimised for machining steel, offering a wear-resistant coated cermet substrate that favours finishing and light universal turning operations. How does the GT9530 grade improve surface finish? The coated GT9530 cermet provides a stable cutting edge and reduced tendency for built-up edge, which helps to deliver improved surface quality compared with many uncoated grades. Which holders are compatible with this ISO plate? Compatibility is determined by the rhombic form, plate thickness (3.18 mm), clearance angle (11°), hole style and tolerance class; choose ISO-compatible external holders or boring bars that match these parameters. What advantage does the cylindrical hole with countersink provide? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure, repeatable clamping and simplifies replacement, contributing to consistent tool positioning and machining accuracy. Is this insert suitable for heavy roughing? This plate is designed for finishing to light universal duties; for heavy roughing, a more robust grade or geometry optimised for high material removal should be chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 NS9530 Wendeplatten - Tungaloy
Reliable finishing performance thanks to the uncoated cermet NS9530 and a sharp cutting edge that reduces cutting forces and improves surface quality; ideal for continuous cuts and small depths of cut. Order the insert directly via Metav Werkzeuge or consult the technical advisors for holder matching and process parameters. CPMT 090304 NS9530 indexable turning insert — Tungaloy The CPMT090304 NS9530 ISO-standard indexable insert is designed for external and internal turning, offering a finishing grade optimised for steel with a rhombic 09 form. Finishing grade NS9530 for steel Uncoated cermet for superior surface finish Sharp edge for low cutting forces Rhombic 09 with 0.4 mm corner radius Finish quality and process efficiency The insert is engineered as an ISO-standard finishing solution that reduces secondary operations by delivering a consistent surface finish. The uncoated cermet composition promotes reduced built-up edge and maintains a sharp cutting edge, which results in lower cutting forces and less heat generation during continuous cuts. This combination supports shorter cycle times and fewer grinding or polishing steps, contributing to measurable productivity gains on batch and single-part runs. Compatibility and secure clamping for reliable results Compatibility with holders is determined by form, relief angle, tolerance class, fastening style, size and thickness; the insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for secure mounting. The rhombic 09 geometry and the 11° clearance angle are optimised for standard external holders and boring bars, enabling stable clamping and repeatable positioning. Clear identification of holder type and clamping set ensures correct assembly and consistent cutting conditions. Chip control and application-specific advantages A single-sided chipbreaker tailored to finishing cuts improves chip formation under small depths of cut and continuous feed conditions. The modest 0.4 mm corner radius minimises cutting forces while preserving edge strength, making the insert particularly suitable where surface integrity is paramount. For customers requiring high-quality finishing on steel components, the combination of uncoated cermet and a precisely ground edge reduces the need for rework and helps achieve tighter surface-tolerance budgets. Practical notes for process planners and buyers The insert is part of a system comprising the ISO turning insert, a matching external holder or boring bar, a shim/clamping set and spare screws; correct pairing is essential for achieving the promised surface results. Given the finishing orientation of the grade, the insert is recommended for continuous cuts and small depths of cut rather than heavy roughing. Technical advisors can provide guidance on feed, speed and holder selection to align the component design with the insert’s strengths. For matching holders, application advice or availability of the Tungaloy CPMT 090304 NS9530 finishing insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998457 SKU: 6998457-Tungaloy Manufacturer SKU: TUN6998457 Model series: ISO turning indexable inserts WPL designation: CPMT090304 Manufacturer: Tungaloy Core numeric data Thickness: 3.18 mm Clearance angle: 11° Included angle: 80° Corner radius: 0.4 mm Size: 09 Special features Grade NS9530 — finishing for steel Uncoated cermet cutting material Single-sided chipbreaker Rhombic shape (09) Cylindrical hole with one-sided countersink (40°–60°) Typical application: external and internal turning System components: insert, holder/boring bar, shim/clamping set, spare screws Compatibility determined by form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The CPMT090304 NS9530 Tungaloy insert is a finishing grade developed for steel and is optimised for continuous cuts and small depths of cut. What is the cutting material and how does it help? The insert uses an uncoated cermet cutting material; this composition supports a sharp cutting edge and improved surface finish while reducing built-up edge during finishing operations. Which holders and mounting are required? Compatibility depends on holder form, relief angle, tolerance and fastening; the insert features a cylindrical hole with a one-sided countersink (40°–60°) for standard clamping sets and external holders. What are the key geometry parameters to consider? Important numeric parameters are 3.18 mm thickness, 11° clearance angle, 80° included angle and a 0.4 mm corner radius for the rhombic 09 geometry. Is this insert suitable for interrupted cuts or roughing? The NS9530 grade is specified as a finishing sort for steel and performs best in continuous cutting and small depths of cut; for heavy interrupted cuts or roughing, a different grade should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the cutting material is described both as an uncoated cermet and as cemented carbide; please verify the product specifications to ensure accuracy and avoid potential misunderstandings or errors in the selection process, as this discrepancy could lead to incorrect assumptions about the material's properties, performance, or suitability for specific applications, which might ultimately affect the quality, efficiency, or reliability of the intended operation, so it is crucial to double-check the provided information with the manufacturer or supplier to confirm the exact nature of the material and ensure that all relevant details are accurate, consistent, and aligned with the intended use case.
CPMT 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing-grade cermet, a 0.4 mm corner radius and ISO compatibility for reliable, high‑quality turning results. Order the insert directly via Metav Werkzeuge or consult the team for application advice. CPMT090304 NS9530 Tungaloy indexable insert — finishing for turning, uncoated cermet CPMT090304 NS9530 is an ISO‑standard rhombic indexable insert engineered for precision finishing in turning operations, offering a sharp cutting edge and consistent surface quality. Finishing grade NS9530 Uncoated cermet for sharp cutting edge ISO rhombic insert, 80° included angle Consistent surface quality for finishing operations The NS9530 grade is a finishing cermet developed to deliver superior surface integrity when machining steel. Its uncoated composition provides a very sharp cutting edge, which reduces cutting forces and minimises built‑up edge formation during continuous cutting. The result is a predictable surface finish and reduced need for secondary processes. For applications where small depths of cut and fine tolerances are the focus, this specification supports stable, repeatable performance. Geometry that supports process stability and flexibility With an 80° included angle and a 0.4 mm corner radius, the plate geometry balances strength and edge finesse. The 11° rake angle lowers shear forces, improving chip formation and reducing vibration in finishing passes. The rhombic plate shape and standard ISO sizing allow straightforward integration into common holders and boring bars; compatibility is governed by form, relief angle, tolerance class, fixing method, size and thickness, which together ensure correct seating and clamping in the toolholder. Material and chip control explained for practical use The cutting material is uncoated cermet, chosen for its ability to produce fine surface textures on steel while maintaining a sharp edge at lower cutting depths. A single‑sided chipbreaker is provided to support controlled chip formation in continuous cuts, limiting entanglement and heat concentration. For operators transitioning from coated grades, the cermet’s behaviour offers a clear advantage in finishing cycles where low cutting forces and excellent surface finish are priorities. Integration into a reliable system for efficient turning The insert is supplied in the ISO series format and functions as part of a system comprising a suitable external holder or boring bar, shim/clamping set and replacement screws. The plate includes a cylindrical hole with a single‑side countersink (40°–60°) for secure fastening and repeatable positioning. The 3.18 mm plate thickness and ISO dimensioning simplify logistics and tool inventory management, enabling faster set‑ups and fewer process interruptions. For precision finishing in turning, contact Metav Werkzeuge to source Tungaloy inserts and discuss the optimal grade and holder combination for specific steel applications — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998459 Manufacturer SKU: TUN6998459 SKU: 6998459-Tungaloy Model series: ISO‑turning indexable inserts Designation: CPMT090304 Facts Corner radius: 0.4 mm Included angle: 80° Rake angle: 11° Plate thickness: 3.18 mm Plate size: 09 Special features Grade: NS9530 Cutting material: uncoated cermet Application: finishing for steel, continuous cut, small depths of cut Chipbreaker: single‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Plate form: rhombic FAQ What material is the CPMT090304 NS9530 suited for? The CPMT090304 NS9530 insert is designed primarily for machining steel in finishing applications, offering a sharp edge and low cutting forces for excellent surface quality. Does this insert require a specific type of holder? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the ISO format ensures broad compatibility with standard external holders and boring bars. What advantages does the uncoated cermet grade NS9530 offer? NS9530 provides a very sharp cutting edge and reduced cutting forces, improving surface finish in continuous turning and making it suitable for small depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com