CPMT 090304 NS9530 Wendeplatten - Tungaloy
There is inconsistent product information: one data entry identifies the cutting material as cemented carbide while another specifies an uncoated cermet grade (NS9530) intended for finishing steel with a sharp cutting edge. This contradiction affects fundamental selection criteria such as recommended cutting speeds, feed rates, machine setup and the expected surface finish, and it prevents reliable specification of the insert for production planning. Please check and confirm which material designation is correct—cermet or cemented carbide—and update the associated technical details (coating status, recommended applications and cutting data) accordingly so that a precise, dependable product description can be generated. If verification is required, the following contact is available: info@metav-werkzeuge.com or +49 2822 7131930.
CPMT 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a dedicated finishing grade, precise 80° rhombic geometry and reliable ISO compatibility for consistent surface quality and efficient machining. Order the CPMT090304 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT090304 NS9530 Tungaloy indexable turning insert — uncoated cermet finishing grade for turning A CPMT090304 NS9530 Tungaloy insert designed for precision external and internal turning, optimised to deliver low cutting forces and superior surface finish in continuous finishing passes Uncoated NS9530 cermet for finishing steel 80° rhombic geometry with 0.4 mm corner radius Single-sided chipbreaker for continuous cuts ISO-compatible insert with cylindrical hole and countersink Optimised finishing performance for steel turning The CPMT090304 NS9530 Tungaloy insert is an uncoated cermet developed as a finishing grade for steel, offering a sharp cutting edge that reduces friction and delivers a markedly high surface finish. Its composition and edge form produce low cutting forces, which is particularly beneficial when machining thin-walled components or delicate features where minimising deformation is critical. The specification targets continuous cut conditions and small depths of cut, translating into predictable results when finishing turned components and reducing the need for downstream rework. Geometry that improves dimensional accuracy and chip behaviour Engineered with an 80° included angle and a 0.4 mm corner radius, the rhombic form provides an effective balance between edge strength and the fine detail required at the finish stage. The single-sided chipbreaker supports controlled chip formation under smooth, continuous cutting, which helps maintain consistent cutting forces and protects the part surface. The 11° clearance angle reduces rubbing at the flank, aiding dimensional stability and prolonging effective tool life, while the countersunk centre hole ensures secure and repeatable clamping in compatible holders. ISO compatibility for quick tool changes and steady production flow Designed as part of an ISO-standard insert family, the component integrates into common turning systems where compatibility is governed by shape, clearance, tolerance class, fastening and thickness. The 3.18 mm plate thickness and the cylindrical hole with a one-sided countersink (40°–60°) facilitate straightforward seating and fastening in matched holders, minimising setup time and maintaining process reliability. For workshop planning, the clear specification supports predictable inventory management and swift replacement during production runs. Contact Metav Werkzeuge for tailored selection and technical advice on fitting the CPMT090304 NS9530 Tungaloy insert into existing turning systems — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability Technical Data Article number: 6998444 Manufacturer SKU: TUN6998444 Metav SKU: 6998444-Tungaloy Model series: ISO turning indexable inserts Designation: CPMT090304 NS9530 Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Countersink range: 40°–60° Special features Material: carbide Grade: NS9530 (uncoated cermet finishing grade) Shape: rhombic Chipbreaker: single-sided Hole: with cylindrical hole and one-sided countersink Application: turning (external and internal) Compatibility: ISO holders (form, clearance, tolerance class, fastening, size, thickness) FAQ Which materials is this insert best suited for? The CPMT090304 NS9530 insert is specified as a finishing grade for steel and is optimised to produce low cutting forces and superior surface finishes on continuous turning operations. What are the key geometric values to check when selecting a holder? Check the 80° included angle, plate size 09, 3.18 mm thickness and 0.4 mm corner radius to ensure the chosen holder matches the CPMT090304 geometry and secures the insert correctly. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation during continuous cuts, improving chip control and contributing to consistent surface quality with reduced risk of chip interference. Is the insert suitable for internal turning as well as external turning? Yes; the design and cutting edge properties of this indexable insert make it suitable for both external and internal finishing operations under the recommended cutting conditions. What clamping interface does the insert use? The insert is supplied with a cylindrical centre hole and a one-sided countersink (40°–60°), intended for secure clamping in compatible ISO holders and bores Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T505 Wendeplatten - Tungaloy
Take advantage of the combination of economical machining, stable chip control and ISO conformity for reliable turning operations; the CVD-coated carbide grade T505 delivers consistent performance on cast iron and integrates with standard ISO holders. Order genuine inserts or consult Metav Werkzeuge for application support. CPMT090304 T505 indexable insert — Tungaloy CVD-coated carbide, single-sided chipbreaker A CPMT090304 T505 indexable insert engineered for efficient cast‑iron turning in ISO‑standard turning systems. CVD-coated carbide grade T505 Optimised for cast-iron turning ISO-form CPMT090304 compatibility Single-sided chipbreaker design Consistent chip control for productive cast‑iron turning The rhombic insert offers a reliable chip‑forming geometry that keeps interruptions and tool wear to a minimum. With a single-sided chipbreaker matched to the grade, the system promotes stable swarf evacuation and reduces the risk of built-up edge when machining cast iron. The combination of geometry and coating results in steady cutting action and fewer in‑process adjustments, which contributes directly to higher component throughput and predictable cycle times. Secure mounting and ISO conformity for flexible tool setups Designed to the ISO form CPMT090304, the insert matches common holder interfaces so replacement and tool presetting are straightforward. Compatibility is determined by shape, clearance angle, tolerance class, fastening and plate thickness; the 11° clearance angle and 3.18 mm plate thickness ensure correct seating and repeatable clamping. This standardisation simplifies tooling inventories and makes the insert suitable for both external and internal turning when paired with the correct holder and shim setup. Material and coating tuned for economical performance Manufactured from premium carbide and finished with a CVD-coated surface, the grade T505 is tuned for economical machining of grey and ductile cast irons where a balance of wear resistance and toughness is required. The coating reduces adhesive wear and preserves edge integrity during medium cutting speeds, extending effective tool life and lowering downtime for insert changes. Where interrupted cuts or variable rigidity occur, the recommended grade selection supports consistent results and surface finish with minimal rework. Contact Metav Werkzeuge for application advice and to order genuine Tungaloy CPMT090304 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6831837 Manufacturer SKU: TUN6831837 SKU: 6831837-Tungaloy Model series: ISO turning indexable inserts Designation: CPMT090304 Data Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 80° Plate thickness: 3.18 mm Insert size: 09 Hole: with hole Special features Material: carbide Coating: CVD Grade: T505 Plate form: rhombic Chipbreaker: single-sided Typical application: turning; external and internal Hole style: cylindrical hole + single-side countersink (40°–60°) FAQ What materials is this insert best suited for? The CPMT090304 T505 insert is optimised for machining cast iron; the T505 grade and CVD coating provide a balance of wear resistance and toughness for grey and ductile cast irons. Can this insert be used in standard ISO holders? Yes, the insert is manufactured to the ISO form CPMT090304 and is compatible with holders that match form, clearance angle, tolerance class, fastening and plate thickness. What is the corner radius and how does it affect finishing? The insert has a 0.4 mm corner radius which offers a compromise between strength and surface finish, suitable for general turning where moderate edge robustness and acceptable finish are required. Does the insert have a hole for secure fastening? Yes, the design includes a cylindrical hole with a single‑side countersink (40°–60°) to ensure positive locating and secure clamping in most clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T5115 Wendeplatten - Tungaloy
Benefit from a proven combination of CVD-coated cemented carbide T5115, ISO compatibility and a secure clamping design for reliable cast-iron turning; the robust 0.4 mm corner radius supports consistent edge life. Order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge specialists for application guidance. CPMT 090304 T5115 turning insert — CVD-coated cemented carbide, rhombic 09 (80°) by Tungaloy The CPMT090304 T5115 Tungaloy insert is an ISO rhombic turning insert engineered for external and internal turning of cast iron, featuring a single-sided chipbreaker and a cylindrical hole with a single-side countersink for secure clamping ISO rhombic 09, 80° geometry CVD-coated cemented carbide T5115 0.4 mm corner radius for consistent edge Cylindrical hole with single-side countersink Consistent performance for cast-iron turning The indexable insert delivers a dependable balance between wear resistance and edge stability thanks to the T5115 CVD-coated grade. Designed specifically for machining cast iron, the combination of coating technology and substrate hardness reduces flank wear and maintains cutting-edge integrity across interrupted cuts. The CVD layer improves resistance to built-up edge and thermal loading, which contributes to longer intervals between tool changes and more predictable production cycles. Secure clamping and ISO compatibility to simplify setup Compatibility with ISO-standard holders is determined by plate form, relief angle, tolerance class, fixation method, size and thickness; this insert aligns with those parameters to enable straightforward integration into existing toolholders. The cylindrical hole with single-side countersink (40°–60°) ensures secure clamping, while the 11° clearance angle preserves the intended cutting geometry. These characteristics reduce setup time and support repeatable, accurate clamping, which is essential for maintaining part tolerances in serial production. Edge geometry engineered for reliable finishes and tool life The 0.4 mm corner radius balances strength and surface finish, offering sufficient edge robustness for roughing passes while allowing acceptable surface quality in finishing operations. The single-sided chipbreaker controls chip formation for the typical chip form of cast iron, preventing entanglement and promoting consistent evacuation. A plate thickness of 3.18 mm contributes to overall stability during cutting, lowering vibration risk and supporting a uniform machined surface. Productivity and application guidance for efficient machining Selecting the correct chipbreaker and grade for the workpiece and machining stability is decisive for productivity. The T5115 grade provides a universal solution for cast-iron applications, enabling productive machining across a range of speeds and feeds. For optimal results, pair the insert with a suitable ISO holder matched for form, size and tolerance class; this combination supports higher metal removal rates, longer tool life and consistent part quality in everyday workshop use. For tailored application advice or immediate supply of Tungaloy inserts such as the CPMT090304 T5115, contact Metav Werkzeuge for specialist guidance and availability Technical Data Article number: 6864769-Tungaloy Manufacturer SKU: TUN6864769 Manufacturer article number: 6864769 Model series: ISO turning indexable inserts Material: Cemented carbide Facts Geometry: Rhombic 09 (80°) Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.18 mm Hole: Cylindrical hole + single-side countersink 40°–60° Special features Grade/coating: T5115 (CVD-coated) Single-sided chipbreaker For turning of cast iron Compatible with ISO-standard holders (form, size, thickness) Rhombic plate form with secure clamping provision FAQ Which materials is this insert best suited for? The CPMT090304 T5115 Tungaloy insert is optimised for machining cast iron, delivering improved wear resistance and stable cutting behaviour for grey and nodular cast irons. What advantage does the T5115 grade provide? The T5115 CVD-coated grade offers a balanced mix of wear resistance and edge stability, helping to extend tool life and maintain consistent cutting performance in cast-iron turning. How is the insert secured in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) for fixation; compatibility with ISO holders depends on form, free angle, tolerance class, fixation method, size and thickness. Which cutting tasks suit the single-sided chipbreaker? The single-sided chipbreaker controls chip formation for typical cast-iron chips, making it suitable for both external and internal turning where predictable chip control and evacuation are required. What geometry details influence machining stability? Key geometry features are the rhombic 09 form (80°), 0.4 mm corner radius and 11° clearance angle, together providing a stable cutting edge, good surface finish and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and ISO CPMT090304 geometry for stable stainless steel turning and longer tool life. Order the CPMT090304 insert directly via Metav Werkzeuge or ask our consultants for application support. CPMT090304 T6215 Tungaloy indexable insert for turning (ISO CPMT090304, CVD-coated carbide) CPMT090304 T6215 is an ISO rhombic indexable insert designed for robust external and internal turning of stainless steels under stable to lightly interrupted conditions CVD-coated carbide grade T6215 ISO CPMT090304 rhombic 80° insert Suitable for stainless steel turning Cylindrical hole with 40°–60° countersink Proven wear resistance for consistent production The CVD-coated carbide composition of the insert delivers wear resistance and predictable tool life under continuous and lightly interrupted cuts. The T6215 grade is engineered to maintain edge integrity when machining stainless steels, which tend to work-harden; this reduces tool changes and supports longer uninterrupted production runs. The chemical vapour deposition layer improves thermal stability at the cutting zone, so surface finish and dimensional repeatability remain consistent even when feeds and speeds vary slightly. Precise fit and clamping for secure cutting Compatibility with ISO toolholders depends on the insert’s shape, relief angle, tolerance class, fastening and thickness; the CPMT090304 geometry ensures secure locating in standard CPMT pockets. The insert features an 80° rhombic form, 11° relief angle, a 0.4 mm nose radius and a cylindrical hole with single-sided countersink (40°–60°), enabling reliable clamping and repeatable positioning. Correct selection of the matching holder, backing shim and screw eliminates movement during cutting, which in turn reduces vibration and improves tool life and part quality. Productivity gains through application-focused design The single-sided chipbreaker and the combination of coating and substrate are optimised for chip control when turning stainless steels; this fosters stable chip formation and reduces the risk of built-up edge. By choosing the appropriate grade and chipbreaker for the workpiece and machining stability, cycle times can be shortened and insert usage maximised. The ISO standard format also simplifies inventory management and allows quick replacement without special adapters, supporting efficient setup changes on high-mix production lines. Contact Metav Werkzeuge for availability and tailored application advice on the Tungaloy CPMT090304 T6215 insert — our consultants provide support on grade and chipbreaker selection to optimise turning performance Technical data Article number: 6876412 SKU: 6876412-Tungaloy Manufacturer SKU: TUN6876412 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: CPMT090304 Grade/coating: T6215 (CVD-coated) Material: carbide Size: 09 Thickness: 3.18 mm Included angle: 80° Relief angle: 11° Corner radius: 0.4 mm Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Special features One-sided chipbreaker Designed for turning of stainless steels ISO-standard geometry for easy holder compatibility Stable performance under uninterrupted to slightly interrupted cuts Replacement screws and backing shims compatible with standard holders FAQ What materials is the insert suitable for? The Tungaloy CPMT090304 T6215 insert is specified for machining stainless steels; the T6215 CVD-coated carbide provides the wear resistance needed for these alloys. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the CPMT090304 geometry fits standard CPMT pockets designed for 09-size rhombic inserts. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert promotes controlled chip formation for turning stainless steels, helping to avoid long, stringy chips and improving surface finish. What are the key dimensions to check before fitting the insert? Verify the insert designation (CPMT090304), thickness 3.18 mm, corner radius 0.4 mm and the hole/counterbore details to ensure a secure and repeatable clamp in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T6215 Wendeplatten - Tungaloy
Take advantage of wear-resistant CVD-coated carbide, compact geometry and precise clamping features to maintain consistent production of stainless-steel turned parts. Order this insert directly via Metav Werkzeuge or contact the consultants for compatibility checks and application advice. CPMT 090304 T6215 indexable turning insert — Turning (Tungaloy) CPMT 090304 T6215 is an ISO-format, rhombic indexable insert designed for stable turning of stainless steels under continuous or mildly interrupted cutting conditions. CVD-coated carbide for stainless steel machining Rhombic insert, 80° cutting edge geometry One-sided chipbreaker for stable cuts Central hole with cylindrical seat and countersink High wear resistance for demanding stainless-steel turning The CPMT090304 insert combines a CVD-coated surface with a robust carbide substrate to resist abrasive and adhesive wear that commonly occurs when machining stainless steel. The chemical vapour deposition layer improves heat resistance and reduces oxidation at elevated cutting temperatures, which translates into longer intervals between indexings and fewer unplanned tool changes. With an effective cutting angle of 80° and a modest 0.4 mm corner radius, the geometry is tuned to balance edge strength and surface finish, delivering consistent component tolerances on rings, shafts and housings. Controlled chip flow and secure clamping for predictable productivity A dedicated one-sided chipbreaker directs chips away from the cutting zone, reducing risk of chip re-cutting and helping maintain machine uptime. The insert’s central cylindrical hole with a single-side countersink (40°–60°) ensures repeatable, vibration-free clamping in compatible holders, supporting stable cutting even under slightly interrupted cuts. This combination of chip control and reliable fixation reduces the chance of burnishing or poor surface quality, improving first-pass yields and process stability. ISO compatibility and rigid plate design for versatile setup Produced to the ISO indexable insert series norms, the plate’s rhombic shape and defined parameters simplify holder selection: shape, clearance angle, tolerance class, fastening method, size and thickness determine fit. The 3.18 mm plate thickness and 11° clearance angle give the insert sufficient rigidity for medium-depth turning operations while remaining compatible with a wide range of external holders and boring bars. This standardised approach shortens setup time and makes tool management predictable across batches. Reliable performance that supports shop-floor efficiency Designed for machine shops seeking consistent results, this indexable cutting solution promotes stable chip formation and measurable improvements in tool life. The combination of a wear-resistant coating and a dedicated chipformer yields fewer interruptive events, lower scrap rates and smoother finishing passes. For production environments where repeatability and surface integrity matter, the insert delivers a pragmatic balance of performance and economy without introducing complexity into process planning. For recommendations on holder compatibility or to specify the Tungaloy CPMT090304 T6215 insert for a particular turning task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application support and fast delivery options. Technical Data Article number: 6876408-Tungaloy Manufacturer article number: 6876408 Manufacturer SKU: TUN6876408 Designation: CPMT090304 T6215 Facts Thickness: 3.18 mm Insert size: 09 Clearance angle: 11° Cutting angle: 80° Corner radius: 0.4 mm Special features Material: carbide Coating: CVD Shape: rhombic Chipbreaker: one-sided Hole: cylindrical hole + single-side countersink (40°–60°) Application: turning of stainless steels FAQ What materials is this insert designed to machine? The CPMT090304 T6215 insert is formulated for machining stainless steels, offering a wear-resistant CVD coating and carbide substrate suitable for stable turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation of the CPMT090304 supports use in standard external holders and boring bars designed for 09-sized rhombic plates. How does the one-sided chipbreaker affect cutting performance? The one-sided chipbreaker promotes controlled chip formation and evacuation, reducing re-cutting and improving surface finish during continuous or lightly interrupted turning with this Tungaloy insert. What advantages does the CVD coating provide? CVD-coated carbide improves thermal resistance and wear protection during machining of stainless steels, which supports longer tool life and steadier dimensional results compared with uncoated grades. Is the insert suitable for interrupted cuts? Yes — the T6215 grade and the insert geometry are specified for stable to lightly interrupted turning conditions, offering reliable edge strength for such applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for enhanced wear resistance, a precise 0.4 mm corner radius and full ISO compatibility to maintain steady production in stainless-steel turning operations. Order the CPMT090304 T6215 indexable insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CPMT090304 T6215 CPMT indexable insert for Turning by Tungaloy — CVD-coated carbide, 0.4 mm radius, 80° The CPMT090304 T6215 is an ISO rhombic insert designed for external and internal turning; it combines a wear-resistant CVD-coated carbide grade with a single-sided chipbreaker and an 80° approach geometry for consistent machining of stainless steels under stable to lightly interrupted conditions. CVD-coated carbide for wear resistance Compatible with ISO rhombic 09 holders 0.4 mm corner radius for reliable edge strength Single-sided chipbreaker with 80° geometry Consistent tool life from the CVD-coated carbide grade The insert is manufactured in a CVD-coated carbide grade (T6215) developed to resist abrasive wear and preserve cutting-edge integrity when machining stainless steels. The chemical vapour deposition layer provides a hard, adherent surface that reduces flank wear and helps to maintain dimensional stability across longer batches. As a result, process reliability improves and interruptions for tool changes are less frequent; this translates into more predictable machining cycles and fewer quality deviations. Geometry and clamping designed for secure, repeatable performance A precise 0.4 mm corner radius and the rhombic 09 form contribute to good edge strength and predictable cutting forces. The insert features an 80° approach geometry with a 3.18 mm plate thickness and an 11° clearance angle, providing mechanical robustness and secure seating in ISO-standard holders. The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures correct clamping alignment and repeatability; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness, so matched holders and clamping kits are essential for full performance. Process suitability and measurable production benefits This grade and geometry combination is optimised for turning operations where stability is available—typical tasks include finishing and semi-finishing of corrosion-resistant alloys and similar materials. The single-sided chipbreaker assists in chip control under moderate depths of cut, reducing the risk of built-up edge and minimising rework. Specifying the correct chipbreaker and grade for the part material and machine rigidity supports higher productivity, reduces scrap rates and helps maintain surface quality without overcomplicating tool management. Practical handling, selection advice and compatibility checks The insert is supplied as an ISO-standard indexable plate and must be paired with a matching external holder, clamp set and replacement screws. For internal turning, select a stable boring bar with the corresponding ISO seat; for external operations, ensure that the holder geometry matches the rhombic 09 seating and 80° approach. For further technical data or help selecting the correct chipbreaker and holder combination, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. The product is traceable by manufacturer article number and SKU for easy reordering and inventory control. Contact Metav Werkzeuge today for tailored advice on the Tungaloy CPMT090304 T6215 insert and to specify the holder and clamp set that best suit the application. Technical data Article number: 6876410 Manufacturer article number: 6876410 Manufacturer SKU: TUN6876410 SKU: 6876410-Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Insert size: 09 Plate thickness: 3.18 mm Clearance angle: 11° Approach angle: 80° Special features Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Grade/coating: T6215 CVD-coated carbide Chipbreaker: single-sided Application: turning Material family: carbide Typical use: stainless steels under stable to light interrupted conditions ISO compatibility: ISO-standard indexable insert FAQ Is this insert suitable for machining stainless steels? Yes. The CPMT090304 T6215 insert is specified for stainless steels, with a CVD-coated carbide grade and chipbreaker geometry optimised for stable to lightly interrupted turning operations. Which holders are compatible with this insert? Compatibility requires holders that accept the rhombic 09 insert form with an 80° approach and matching seat dimensions; correct fit depends on form, clearance angle, tolerance class, fastening, size and thickness. What does the grade designation T6215 indicate? T6215 denotes a CVD-coated carbide grade engineered for wear resistance and stable cutting when turning stainless steels; the coating improves flank and crater wear performance. Can this insert be used for internal as well as external turning? Yes; the insert suits both external and internal turning tasks provided the holder or boring bar offers sufficient rigidity and the correct ISO seating and clamping are used. How should the chipbreaker be chosen for specific parts? Select the chipbreaker based on workpiece material, depth of cut and machine stability; the single-sided chipbreaker on this insert supports effective chip control for many stainless-steel finishing and semi-finishing scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T9215 Wendeplatten - Tungaloy
The combination of CVD‑coated carbide T9215 and a 0.4 mm nose radius delivers high productivity with reliable chip control and enhanced wear resistance; the ISO format ensures straightforward replacement in standard holders. Order the CPMT090304 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT090304 T9215 indexable insert for turning, Tungaloy, rhombic 09, 80° The CPMT090304 T9215 is an ISO‑standard turning insert engineered for external and internal turning where stable cutting, consistent surface finish and high throughput are required. CVD-coated carbide, grade T9215 80° rhombic form for versatile turning Single-sided chipbreaker for consistent chips ISO compatibility with hole and countersink Consistent productivity through wear‑resistant grade and geometry The insert combines a CVD‑coated carbide substrate with a geometry optimised for medium steel machining. The T9215 grade is formulated to offer high wear resistance while maintaining breakage resistance, which supports prolonged tool life and predictable tool‑change intervals. For operations that favour continuous or slightly interrupted cuts, this balance reduces unscheduled stoppages and contributes directly to improved throughput and lower unit costs. The 0.4 mm nose radius provides a compromise between strength and finish, enabling stable turning without sacrificing surface quality. Simple integration into ISO holder systems for reliable clamping Designed as an ISO‑standard indexable insert, the component fits holders where form, clearance, tolerance class, fastening method, size and thickness match. The rhombic shape with an 80° included angle increases accessibility for a range of turning tasks, and the insert’s cylindrical hole with one‑sided countersink (40°–60°) assures secure locating and repeatable seating. This compatibility minimises setup time and simplifies tool inventory management, allowing workshops to standardise on fewer holders and inserts while keeping process stability high. Predictable chip control and suitability for productive cuts A single‑sided chipbreaker on the CPMT090304 improves chip formation for common turning feeds and depths, aiding evacuation and machine cleanliness. The combination of CVD coating and the carbide substrate suits companies aiming for constant cycle times in production runs; it performs well in medium steel, enabling higher cutting speeds than uncoated alternatives. Choosing the correct chipbreaker and grade for the specific workpiece material ensures efficient cutting and reliable surface finish, making the insert a practical choice for manufacturers focused on repeatability and output. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy CPMT090304 T9215 indexable insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773997 SKU: 6773997-Tungaloy Manufacturer SKU: TUN6773997 Model series: ISO turning indexable inserts Material: carbide Facts Thickness: 3.18 mm Nose radius: 0.4 mm Insert size: 09 Clearance angle: 11° Included angle: 80° Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features CVD‑coated carbide, grade T9215 Single‑sided chipbreaker Rhombic insert form (CPMT) ISO designation CPMT090304 Designed for external and internal turning Compatible with ISO holders when form, clearance and fastening match FAQ What applications suit this insert best? The CPMT090304 T9215 Tungaloy indexable insert is intended for external and internal turning, particularly in medium steel where a balance of wear resistance and toughness is required. Which materials is the grade T9215 optimised for? T9215 is a CVD‑coated carbide grade tailored as a first choice for medium steel machining, offering good wear control and resistance to breakage under continuous to slightly interrupted cuts. How is holder compatibility ensured for this ISO insert? Compatibility depends on matching the insert form, clearance (11°), tolerance class, fastening type, size (09) and thickness (3.18 mm); the product’s ISO designation CPMT090304 supports standardised selection for suitable holders. What distinguishes the chip control of this insert? The single‑sided chipbreaker is designed to produce consistent chips across typical turning feeds, improving evacuation and reducing the risk of chip entanglement in production settings. Can the article and SKU numbers be provided for ordering? Yes. Manufacturer article number 6773997, SKU 6773997‑Tungaloy and manufacturer SKU TUN6773997 identify the CPMT090304 T9215 Tungaloy insert for procurement and inventory. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness enable productive medium‑steel turning with consistent surface quality; the ISO‑shaped rhombic insert with an 11° relief and 80° geometry offers secure seating and repeatable results. Order the CPMT090304 insert directly via Metav Werkzeuge or contact the consultants for application advice. CPMT 090304 T9215 turning insert – Tungaloy, CVD‑coated carbide The CPMT090304 T9215 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning of medium steels, combining a robust CVD‑coated carbide grade with a single‑sided chipbreaker for productive cutting. ISO rhombic insert, 80° geometry CVD‑coated carbide grade T9215 Single‑sided chipbreaker, with hole 11° relief angle for stable turning Productive medium‑steel turning with extended tool life The CVD‑coated carbide grade T9215 is engineered as a first choice for mid‑range steel machining. The coating enhances thermal resistance and adhesion, which increases wear resistance during continuous to slightly interrupted cuts, while the carbide substrate provides fracture toughness for stable performance. The rhombic ISO shape with an 80° geometry and a 0.4 mm nose radius delivers a balance between edge strength and surface finish, permitting higher feed rates without compromising component quality. These material and design choices translate into fewer tool changes and more predictable machining cycles. Compatibility and secure clamping for repeatable results Compatibility of the insert with a toolholder is determined by shape, relief angle, tolerance class, fastening, size and thickness. The plate thickness of 3.18 mm and the cylindrical hole with a one‑sided countersink (40°–60°) ensure reliable locating with standard screws and a positive contact to the seat. The single‑sided chipbreaker promotes controlled chipflow, reducing the risk of clogging in external and internal turning operations. The system approach — insert, appropriate outside holder or boring bar, underlay/clamping set and spare screws — simplifies inventory and shortens setup times in production environments. Practical application guidance for consistent machining outcomes For external and internal turning of medium steel, select the chipbreaker and grade to match workpiece stability and the type of cut; the T9215 coating performs particularly well where a compromise between wear life and toughness is required. The 11° relief angle reduces flank contact and helps maintain cutting geometry under variable depths of cut. When programmed for continuous or lightly interrupted cuts, the combination of CVD coating and carbide core promotes consistent surface finish and prolonged edge life. For operators transitioning from uncoated grades, modest increases in cutting speed and optimised feeds typically yield improved productivity without sacrificing component tolerance. For reliable medium‑steel turning with Tungaloy's CVD‑coated grade, contact Metav Werkzeuge for technical advice or order through Metav Werkzeuge's sales team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773984 Manufacturer SKU: TUN6773984 Name: CPMT090304 T9215 Tungaloy insert Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Facts Nose radius: 0.4 mm Plate thickness: 3.18 mm Relief angle: 11° Geometry angle: 80° Size: 09 Hole style: with hole — cylindrical hole + one‑sided countersink (40°–60°) Special features CVD‑coated carbide grade T9215 Single‑sided chipbreaker ISO rhombic insert form Compatible with standard outside holders and boring bars System components: insert, holder, underlay/clamping set, spare screws FAQ What materials is this insert best suited for? The CPMT090304 T9215 insert is optimised for medium‑grade steels; the CVD‑coated carbide offers an effective balance of wear resistance and toughness for these materials. How does the chipbreaker affect machining? The single‑sided chipbreaker on this Tungaloy insert controls chip formation and promotes consistent chipflow, which helps maintain process stability and surface quality during turning. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and plate size; the ISO‑standard rhombic shape and the mounting hole make the insert suitable for common outside holders and boring bars designed for CPMT‑type plates. What advantages does the T9215 grade provide over uncoated grades? Tungaloy's T9215 CVD‑coated grade increases thermal resilience and wear resistance compared with uncoated substrates, providing longer tool life in continuous to lightly interrupted steel turning while retaining resistance to edge fracture. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, a 0.4 mm corner radius and ISO compatibility for reliable medium-steel turning and consistently high productivity; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. CPMT 090304 T9215 CPMT Turning Insert (turning) — CVD-coated carbide, 0.4 mm radius (Tungaloy) The CPMT090304 T9215 is an ISO-format turning insert designed for medium steel machining, combining high wear resistance with fracture toughness for continuous to light interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining 11° clearance angle for stable cutting 0.4 mm corner radius for precise profiling Faster cycles and predictable tool life for medium-steel production The CVD-coated carbide grade T9215 delivers increased wear resistance and improved edge strength compared with uncoated grades, which translates into longer tool life and fewer indexings during series production. As a result, cycle times are stabilised and scrap rates fall, so production flow becomes more predictable. The combination of the coating and the substrate material makes this insert particularly suitable for continuous to light interrupted cuts, offering a balance between productivity and reliability in routine turning operations. Clear guidance on fitment and secure clamping for trouble-free use Compatibility with cutting holders depends on a number of geometric and tolerance-related factors: insert form, clearance angle, tolerance class, mounting method, size and thickness. The ISO system concept used here requires a matching external holder or boring bar, plus a shim/clamp set and replacement screws for secure fastening. The insert features a cylindrical hole with a single‑side countersink (40°–60°), enabling positive seating and repeatable clamping. Understanding these details simplifies selection of the correct toolholder and reduces the risk of improper installation. Edge design and coating for consistent surface finish and tool integrity The rhombic plate form and an 80° included angle deliver robust geometry for general turning profiles, while the 0.4 mm corner radius helps achieve stable edge strength and attractive surface quality on turned parts. The 11° clearance angle reduces rubbing and minimises heat build-up at the flank, aiding chip control and prolonging edge life. The combination of a carbide body and a CVD coating enhances resistance to abrasive wear without sacrificing fracture toughness, which is why this grade is recommended as a first choice for medium steel workpieces where a dependable finish and consistent cutting performance matter. If there is any uncertainty about holder selection or cutting parameters, Metav Werkzeuge can provide practical advice tailored to the machining task. For application-specific recommendations and rapid supply of the Tungaloy CPMT090304 T9215 turning insert, contact Metav Werkzeuge — e-mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773998-Tungaloy Manufacturer SKU: TUN6773998 Manufacturer item number: 6773998 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core measurements Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Thickness: 3.18 mm ISO code: 090304 Plate size: 09 Features & compatibility CVD-coated carbide (T9215) Rhombic plate form With hole — cylindrical hole + single‑side countersink (40°–60°) One‑sided chipbreaker Suitable for turning; medium steel; continuous to light interrupted cuts System: ISO insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy CPMT090304 T9215 insert is optimised for medium steel machining; the CVD-coated carbide substrate balances wear resistance and toughness for continuous to light interrupted cuts. Can the insert be used for interrupted cutting? Yes, the grade is suitable for lightly interrupted cuts; it combines fracture toughness with wear resistance to handle occasional interruptions without rapid edge failure. Which holder features are required for proper mounting? Proper mounting depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; the CPMT090304 requires a compatible ISO rhombic holder with correct clamping/shim and the matching screw assembly. How does the 0.4 mm corner radius affect the part finish? A 0.4 mm corner radius improves edge strength and helps deliver consistent surface finish on turned profiles while providing reasonable control over cutting forces for standard turning operations. Is chip control integrated into the insert design? Yes, the insert has a one‑sided chipbreaker tailored to promote effective chip formation and evacuation when used in the intended turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T9225 Wendeplatten - Tungaloy
The robust T9225 CVD-coated carbide and ISO 090304 geometry deliver dependable mid-to-heavy steel turning with consistent chip control and repeatable surface finish; order the insert via Metav Werkzeuge or consult the technical team for application guidance. CPMT 090304 T9225 CPMT indexable turning insert for turning — 0.4 mm radius, CVD-coated carbide (Tungaloy) CPMT090304 T9225 is an ISO-standard indexable turning insert designed for external and internal turning, offering a balanced combination of toughness and wear resistance for variable cutting conditions ISO 090304 geometry for broad compatibility CVD-coated carbide grade T9225 0.4 mm nose radius for repeatable finishes Cylindrical hole with single-sided countersink Reliable performance under interrupted and variable cuts The CVD-coated carbide grade T9225 is formulated as a robust universal grade for mid-to-heavy steel machining where changing engagement or intermittency demands increased toughness. The coating enhances wear resistance and thermal stability so that edge life is maintained across a range of cutting speeds. This results in fewer insert changes and more predictable process windows in batch production and mixed-run workshops. Improved surface finish and predictable chip behaviour A 0.4 mm nose radius combined with an 11° clearance angle produces a stable cutting edge geometry that supports consistent surface quality on turned components. The single-sided chipbreaker geometry controls chip formation and evacuation, reducing risk of entanglement and tool marks. For operators and process engineers, this means reduced rework and more consistent dimensional results on standard turned features. ISO compatibility for fast tool changeover and set-up reliability The insert follows the ISO 090304 designation with a rhombic 09 outline and a 3.18 mm plate thickness, enabling interchangeability with a wide range of holders and boring bars. The cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and correct seat orientation in indexed tooling systems. Compatibility is achieved via matching form, clearance, tolerance class, fastenings, size and thickness, simplifying tool inventory management. Practical benefits for production and maintenance planning As an indexable component, this insert reduces per-part tooling cost by allowing multiple edge indexes before disposal. The combination of a universal carbide grade and CVD coating supports longer cutting times in moderate to heavy cuts, which helps to lower machine downtime and steady the process capability. Stocking the ISO-standard format and known SKU facilitates quick replenishment and repeatability across shifts and machines. For reliable mid-to-heavy steel turning with proven CVD-coated toughness, contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781000 SKU: 6781000-Tungaloy Manufacturer SKU: TUN6781000 Model series: ISO-Drehwendeschneidplatten Material: carbide Core data ISO designation: 090304 Plate size: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Special features CVD-coated carbide grade T9225 Single-sided chipbreaker Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) Intended application: turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The CVD-coated T9225 grade insert is intended primarily for mid-to-heavy steel turning operations and performs well under variable engagement and lightly interrupted cuts. Does the insert fit standard ISO holders with 090304 geometry? Yes. The insert follows the ISO 090304 format and is compatible with holders that match the rhombic 09 form, plate thickness and clamping style. What are the chip control features of the insert? The single-sided chipbreaker and the 0.4 mm nose radius are designed to produce predictable chip forms and aid evacuation during external and internal turning. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6781000 and the SKU is 6781000-Tungaloy; the manufacturer SKU is TUN6781000. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T9225 Wendeplatten - Tungaloy
A robust, ISO‑compliant indexable insert that combines the CVD‑coated T9225 grade with a 0.4 mm corner radius for reliable medium to heavy turning in steel; the CPMT090304 geometry and cylindrical hole with countersink ensure secure clamping and quick tool changeover. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 090304 T9225 — ISO rhombic turning insert (CVD-coated carbide) by Tungaloy A CPMT090304 T9225 ISO rhombic indexable insert tailored for turning operations, offering a robust universal grade for medium to heavy steel machining CVD-coated carbide grade T9225 ISO rhombic geometry CPMT 09 Cylindrical hole with 40°–60° countersink 0.4 mm corner radius for stable cutting Consistent performance under variable cutting conditions The CVD-coated grade T9225 is specified for a robust, universal performance in medium to heavy steel turning where variable engagement or slightly interrupted cuts demand increased toughness. The coating balances wear resistance with edge strength to extend usable life, while the fine 0.4 mm corner radius contributes to repeatable surface quality and reduced edge chipping. Machining forces are better absorbed with this combination, which translates into fewer insert changes and more stable production cycles. The data-driven geometry supports predictable results across batch and single‑piece production. Fast integration with standard toolholders and secure clamping Designed as an ISO-compliant component, the CPMT090304 geometry fits holders when the form, relief angle, tolerance class, fixation method, size and thickness match the holder specification. The insert includes a cylindrical hole with a one-sided countersink (40°–60°) to secure clamping and prevent rotational movement under load. The 11° relief angle and 3.18 mm plate thickness provide the mechanical support needed for repeatable clamping torque and consistent axial positioning, reducing set‑up time and ensuring interchangeability within ISO tool systems. Productivity gains through controlled chip formation and process reliability Equipped with a one-sided chipbreaker optimised for steel, the insert promotes stable chip formation and evacuation that help keep cycle times low and reduce downtime for chip clearing. The universal character of the grade makes it suitable where workpiece mix or feed variation occurs, enabling fewer tool variants in the tool crib. In practice, this leads to improved process security and predictable tool life, making the component a cost‑efficient element of a production‑oriented turning strategy without sacrificing surface finish or dimensional control. Contact Metav Werkzeuge for tailored process data and ordering of Tungaloy CPMT090304 T9225 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781214 Manufacturer SKU: TUN6781214 Seller SKU: 6781214-Tungaloy Designation: CPMT090304 T9225 Tungaloy insert Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Relief angle: 11° Thickness: 3.18 mm Insert size: 09 Insert angle: 80° Special features Coating: CVD Grade: T9225 Material: Carbide Hole style: Cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: One-sided Shape: Rhombic Application: Turning Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The insert is specified for medium to heavy steel machining; the T9225 grade and chipbreaker are adapted for steel turning applications. How does the CPMT090304 ensure secure clamping? Clamping security is provided by the cylindrical hole with a one-sided countersink (40°–60°) together with the standard CPMT geometry and the defined thickness for consistent clamping torque. Can the insert handle interrupted cuts? Yes, the robust universal grade T9225 is designed to tolerate slight interruptions and variable engagement, offering improved toughness compared with grades optimised solely for continuous cuts. Which holder characteristics must be checked for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fixation, size and plate thickness; the CPMT090304 conforms to ISO dimensions for straightforward matching. Is the insert suitable for finishing and roughing operations? The insert’s grade and chipbreaker combination make it versatile for both finishing and heavier turning operations—selection of feeds and depths should be adapted to the required surface and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 CVD-coated carbide and the precise 0.4 mm corner radius for stable chip control and reliable medium-to-heavy steel turning; compatibility with ISO holders ensures straightforward integration into existing tool systems. Order spare inserts or request application guidance via Metav Werkzeuge for fast technical support. CPMT 090304 T9225 ISO rhombic turning insert, CVD-coated carbide — Tungaloy A CPMT090304 T9225 insert designed for medium-to-heavy steel turning applications, combining a tough CVD-coated carbide grade with a rhombic ISO geometry for consistent performance in external and internal turning. CVD-coated carbide for durability Robust universal grade T9225 Rhombic ISO shape with 80° lead 0.4 mm corner radius, single-sided chipbreaker Dependable performance under variable cutting conditions The CVD-coated carbide substrate and the T9225 grade together deliver a balance of toughness and wear resistance that suits interrupted cuts and changing engagement conditions. This combination reduces edge chipping and extends useful tool life, which in turn supports higher productivity and fewer tool changes during batch work. For operators seeking predictable machining cycles, the hardened coating promotes consistent surface finish and process stability, while the universal character of the grade simplifies tooling strategies across a range of steel components. Geometry engineered for repeatable precision and surface quality The rhombic ISO 09 form with an effective 80° lead angle and 0.4 mm corner radius provides a compromise between strength and finishing capability: robust enough for heavier cuts yet fine enough for acceptable surface integrity. The 11° clearance helps avoid rubbing and reduces built-up edge, while the single-sided chipbreaker assists controlled chip flow for predominantly longitudinal turning. The insert’s with-hole design and cylindrical hole with a one-sided countersink (40°–60°) ensure secure clamping and repeatable seating in compatible holders, contributing to consistent part tolerances and reliable repeatability in production runs. Simple integration and practical workshop benefits Designed as an ISO-standard indexable platelet, the insert fits into a system composed of a matching external holder or boring bar, shim/clamp set and replacement screws; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness, so correct pairing with existing toolholders is essential for peak performance. The 3.18 mm thickness and the ISO dimensions simplify inventory management, and the insert’s universal application profile reduces the need for multiple grades. For teams planning tool consolidation, the combination of geometry and the T9225 grade offers a pragmatic route to fewer part numbers without sacrificing machining robustness. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy’s T9225 inserts into existing turning cells, or request application data and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781314 SKU: 6781314-Tungaloy Manufacturer article number: TUN6781314 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Data Corner radius: 0.4 mm Clearance angle: 11° Thickness: 3.18 mm ISO code: 090304 Lead/approach angle: 80° Size: 09 Special features CVD-coated carbide Grade: T9225 (robust universal grade) Rhombic plate form With hole: cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Application: turning (external and internal) Compatibility: ISO holders and boring bars as per form, size and fastening FAQ What materials is this insert best suited for? The CPMT090304 T9225 insert is optimised for medium-to-heavy steel turning where intermittent cuts or variable engagement demand enhanced toughness. How does the T9225 grade affect tool life? The T9225 CVD-coated grade increases resistance to flank wear and reduces chipping under changing conditions, which typically results in longer service life compared with uncoated grades. Which geometry details support surface finish and stability? The rhombic ISO form with an 80° lead and a 0.4 mm corner radius, combined with an 11° clearance, promotes stable cutting and improved surface quality in standard turning operations. Is the insert compatible with existing ISO holders? Compatibility depends on the holder’s form, clearance, tolerance class, fastening and size; the insert is ISO-standard but must be matched to a suitable external holder or boring bar. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when paired with the appropriate boring bar and clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.4 mm edge radius and secure ISO compatibility for consistent turning performance; this reduces downtime and simplifies tooling choices. Order the CPMT090304 T9225 directly via Metav Werkzeuge or ask our consultants if needed. CPMT 090304 T9225 indexable turning insert by Tungaloy — ISO rhombic 09, 80° cutting angle CPMT090304 T9225 is an ISO‑standard indexable turning insert engineered for medium to heavy steel machining, providing high toughness where interrupted cuts or variable engagement demand resilience CVD-coated carbide grade T9225 Robust for medium to heavy steel machining ISO rhombic 09 profile, 80° cutting angle One-sided chipbreaker with cylindrical hole Reliable cutting for interrupted and heavy cuts The CVD‑coated carbide composition of this insert (grade T9225) combines wear resistance with increased toughness, so the component copes with variable engagement and mildly interrupted cuts. The insert’s robust universal grade reduces the need for multiple specialised grades in stock, improving process efficiency and lowering overall setup complexity. Compatibility with standard ISO holders ensures predictable fitment and secure clamping in common tool systems, supporting steady production flows and reproducible part quality. Geometry engineered for stable clamping and surface finish A rhombic 09 plate form with an 80° cutting angle and 11° clearance creates a stable cutting geometry that balances shear strength and surface integrity. The 0.4 mm edge radius supports edge strength for heavier depths of cut, while the 3.18 mm plate thickness contributes to rigidity under load. The insert’s cylindrical hole with single-sided countersink (40°–60°) allows reliable fastening; matching holder form, tolerance class and clamping components prevents misalignment and secures consistent tool life. The integrated one-sided chipbreaker helps produce controlled chips and reduces secondary operations related to chip management. Economic advantages and practical application notes Choosing this indexable plate for turning work delivers longer intervals between index changes and fewer emergency tool swaps, which enhances uptime and cost‑efficiency. The CVD coating (chemical vapour deposition) forms a thin, adherent protective layer that reduces flank wear and thermal degradation at cutting interfaces — this translates to steadier dimensional accuracy over more parts. The insert is especially suited to steel machining in medium to heavy operations, and is compatible with external and internal turning set‑ups when matched with appropriate holders, underlay plates and fastening screws. For reliable, production‑ready inserts from Tungaloy, contact Metav Werkzeuge for tailored advice or to secure stock for upcoming turning operations Technical data Article number: 6781181 SKU: 6781181-Tungaloy Manufacturer SKU: TUN6781181 Brand: Tungaloy Designation: CPMT090304 T9225 indexable insert Core data Edge radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 09 Cutting angle: 80° Manufacturer article number: 6781181 Special features Material: CVD-coated carbide Grade: T9225 Plate form: rhombic Chipbreaker: one-sided Hole: cylindrical with single-sided countersink (40°–60°) Application: turning System: ISO turning insert compatible with ISO holders and clamping sets FAQ Is this insert suitable for interrupted cuts and variable engagement? The CPMT090304 T9225 insert from Tungaloy is designed as a robust universal grade and is suitable for interrupted cuts and varying entry conditions due to its tougher CVD‑coated carbide composition. Which materials is the insert intended to machine? This indexable insert is optimised for steel machining in medium to heavy operations, offering stable performance where toughness and wear resistance are required. Can the insert be used for internal as well as external turning? Yes, the geometry and size make the insert appropriate for both external and internal turning when combined with a compatible ISO holder and the correct clamping accessories. What does the T9225 grade mean in practice? The T9225 grade represents a CVD‑coated carbide formulation aimed at delivering a balance of wear resistance and toughness for productive steel machining under variable conditions. How should the insert be clamped for secure operation? Clamping must match the ISO profile, thickness and tolerance class; the cylindrical hole with single‑sided countersink (40°–60°) requires a corresponding screw or clamping set to ensure correct axial and rotational restraint. Does the CVD coating improve tool life at higher cutting temperatures? The CVD coating provides a heat‑resistant surface layer that reduces flank wear and helps maintain tool edge integrity under elevated cutting temperatures, extending usable life compared with uncoated grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH6225 Wendeplatten - Tungaloy
Combining a PVD‑coated carbide grade AH6225 with an ISO rhombic 09 geometry, this insert offers a sharp yet stable cutting edge optimised for stainless steel turning. The 0.8 mm corner radius and 11° clearance ensure reliable surface finish and repeatable results in medium machining; order the CPMT090308 AH6225 insert via Metav Werkzeuge or request specialist advice if needed. CPMT 090308 AH6225 ISO indexable insert for turning, PVD‑coated carbide — Tungaloy A CPMT 090308 AH6225 rhombic ISO insert designed for external and internal turning of stainless steels, delivering stable cutting performance under variable conditions PVD-coated carbide for durability Grade optimised for stainless steels ISO rhombic 09 with 80° geometry 0.8 mm corner radius for fine finishes Maximum process reliability through tailored grade and coating The combination of a PVD‑coated surface and the AH6225 carbide composition provides a balanced balance between edge sharpness and wear resistance. In machining of stainless steels, the coating reduces adhesive wear and improves temperature resistance, which translates into more consistent tool life and fewer interruptions. The result is predictable productivity gains and a reduced need for frequent insert changes, helping to keep cycle times steady in batch and serial production. Precise geometry for consistent surface quality and chip control With the ISO rhombic 09 form and an 80° insert angle, the geometry is oriented towards robust engagement and good tool life in both external and internal turning. The 0.8 mm corner radius supports improved surface finish on medium passes without compromising edge strength. A single-sided chipbreaker aids controlled chip formation in varied cutting conditions; for interrupted cuts or mixed stability scenarios this layout helps avoid long stringy chips and reduces the risk of machine downtime. Secure clamping and easy integration into ISO tool systems The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to match standard clamping systems. Combined with the typical holder, shim and screw stack, the component integrates into existing ISO toolholders with predictable seat and tolerance behaviour. The 3.18 mm thickness contributes to stable clamping and resistance to bending under load, which supports repeatable dimensional accuracy across a production run. Practical machining guidance and selection note This insert is specified for turning stainless steels under medium cutting conditions; select the chipbreaker and cutting data to match workpiece stability and feed range. For higher metal removal rates or different materials, consider alternative grades or geometries. Specification advice is available from Metav Werkzeuge; technical drawings, recommended cutting parameters and compatibility checks with specific holders can be supplied on request. For supply and tailored specification of Tungaloy AH6225 turning inserts, contact Metav Werkzeuge for expert advice and rapid availability. Technical data Article number: 6829443 Manufacturer SKU: TUN6829443 Model series: ISO turning indexable inserts Grade: AH6225 Coating: PVD Dimensions & angles Size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Insert angle: 80° Features & applications Material: carbide Shape: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning; external and internal stainless steel machining FAQ Which materials is this insert best suited for? The CPMT090308 AH6225 insert is optimised for machining stainless steels; the AH6225 grade and PVD coating are selected to give good edge stability and wear resistance for those materials. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for screw clamping; this arrangement matches standard ISO holders when used with the recommended shim and screw. What machining tasks is this geometry suitable for? The rhombic 09 form with an 80° angle and a 0.8 mm radius is intended for both external and internal turning at medium cuts, offering a compromise between finish quality and edge robustness. Does the AH6225 grade include a chipbreaker, and what is its effect? Yes, the insert features a single-sided chipbreaker that promotes predictable chip formation and improved evacuation, which supports stable cycle times and surface consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH6225 Wendeplatten - Tungaloy
Combining a sharp, stable cutting edge with a robust PVD-coated carbide grade delivers consistent material removal and longer in-process life; the 80° rhombic geometry and 0.8 mm corner radius ensure reliable performance in medium-duty machining of rostfreier Stahl — order directly via Metav Werkzeuge or consult the technical team for holder compatibility. CPMT 090308 AH6225 Tungaloy indexable insert for Turning — PVD-coated carbide, 80° rhombic The CPMT090308 AH6225 indexable insert for external and internal turning is engineered for medium-duty operations and is optimised for rostfreier Stahl applications. PVD-coated carbide substrate Optimised for rostfreier Stahl 80° rhombic, 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Stable cutting and consistent edge life for rostfreier Stahl The insert uses a PVD-treated carbide grade designed to balance edge sharpness with toughness. This combination reduces edge chipping at interrupted cuts and maintains dimensional stability during medium cutting depths. For production environments where material variation and intermittent engagement occur, the specified grade offers a controlled wear pattern, which translates into fewer indexings and predictable tool-change intervals. The described geometry supports steady chip formation, which helps to avoid workpiece surface defects and unexpected scrap. Compatibility and secure clamping to support process reliability Compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic insert is supplied with a cylindrical hole and single-side countersink (40°–60°) to enable standard clamping systems; this ensures repeatable seating and repeatable runout when paired with a suitable outside holder or boring bar. Correct selection of the matching holder and clamping set, including backing pads and screws, is essential for achieving the stated performance and for preserving the insert’s cutting edge integrity. Geometry that balances strength and finish An 80° approach angle provides a compromise between robust support and the ability to reach shoulders and external contours. The 0.8 mm corner radius gives increased edge strength compared with smaller radii, while still permitting acceptable surface finish at appropriate feeds. The 11° relief angle reduces rubbing on the flank and helps maintain form accuracy; it is particularly effective when handling the work-hardening tendency of rostfreier Stahl. For operators less familiar with insert geometry: a larger corner radius typically increases tool life but requires slightly higher feed to avoid marks from the edge radius. AH6225 grade and the single-sided chipbreaker advantage The AH6225 grade is a PVD-coated hardmetal developed for universal use on rostfreier Stahl, offering a sharp yet stable cutting edge in variable conditions. The single-sided chipbreaker assists in forming short, controlled chips at moderate depths of cut, which simplifies chip evacuation and reduces the risk of built-up edge. In systems where coolant application or chip flow is constrained, a predictable chip shape improves throughput and reduces secondary operations for chip management. Contact Metav Werkzeuge today for tailored recommendations on Tungaloy turning inserts, holder compatibility and fast supply via Metav Werkzeuge — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6829383 SKU: 6829383-Tungaloy Manufacturer SKU: TUN6829383 Model series: ISO turning indexable inserts Material: carbide Core specifications Approach angle: 80° Corner radius: 0.8 mm Relief (clearance) angle: 11° Thickness: 3.18 mm Size: 09 Designation: CPMT090308 Special features PVD-coated carbide (AH6225) Single-sided chipbreaker Rhombic plate form With hole: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) Optimised for rostfreier Stahl FAQ Can the insert be used for both external and internal turning? Yes. The CPMT090308 AH6225 indexable insert is specified for external and internal turning; compatibility with a holder is determined by form, clearance angle, fastening and size. Which materials is this grade intended for? The AH6225 PVD-coated grade is optimised for rostfreier Stahl and suited to medium-duty machining where a balance of sharpness and edge stability is required. What does the 80° geometry mean for machining? An 80° approach angle provides strong edge support while allowing access to shoulders and profiles; it is a common compromise between robustness and reachability in turning operations. How does the single-sided chipbreaker affect chip control? The single-sided chipbreaker promotes controlled, shorter chips at moderate depths of cut, improving evacuation and reducing the likelihood of chip entanglement in constrained setups. Which specifications should be checked to ensure holder compatibility? Verify the insert form (CPMT), size (09), thickness (3.18 mm), relief angle (11°), hole style and tolerance class to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated cemented carbide AH6225, ISO compatibility and a 0.8 mm corner radius for consistent turning performance and reliable surface quality; order the insert via Metav Werkzeuge or consult our specialists for application-specific setup. CPMT 090308 AH6225 — ISO turning insert for turning by Tungaloy The CPMT090308 AH6225 is an ISO‑standard rhombic indexable insert intended for external and internal turning, optimised for machining stainless steels under varying cutting conditions. ISO‑standard rhombic insert 09 PVD‑coated cemented carbide grade AH6225 Sharp yet stable cutting edge for stainless steel Compatible with holders with 11° clearance Consistent performance on stainless steels and mixed batches The insert is supplied in a PVD‑coated cemented carbide grade (AH6225), developed for a balance between edge sharpness and robustness. This combination reduces the tendency for work hardening on stainless steel and maintains cutting stability under interrupted cuts or variable feeds. The PVD coating increases wear resistance while preserving a keen edge, which translates into longer in‑service intervals and more predictable component tolerances. This makes the insert particularly suitable for shops facing frequent material changes or medium‑duty series production. Precise geometry for predictable surface finish and tool life Designed as a rhombic 09 insert with an 11° clearance angle and a 0.8 mm corner radius, the geometry supports repeatable insert seating and a defined chip flow. The combination of corner radius and clearance angle enables a reliable surface finish without excessive cutting forces in common turning operations. The insert’s indexable design facilitates quick orientation changes on the toolholder, reducing downtime and simplifying tool management. Compatibility with ISO‑standard holders ensures straightforward integration into existing turning setups. Practical selection and integration for productive turning The insert accepts a cylindrical hole with a one‑side countersink (40°–60°), permitting simple clamping with standard screws and clamping sets. Select the matching chipbreaker and grade according to the workpiece material and process stability: a one‑sided chipformer in this insert suits many turning routines, but matching holder rigidity and appropriate feeds will enhance tool life. Where higher thermal loads or abrasive conditions occur, the PVD coating and cemented carbide composition support sustained performance. For shops seeking to reduce setup variability, the ISO conformity of the insert simplifies spare‑part management and holder interchangeability. Contact Metav Werkzeuge for tailored recommendations on integrating the Tungaloy CPMT090308 AH6225 insert into the production process — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930. Technical data Article number: 6829326 Manufacturer SKU: TUN6829326 SKU: 6829326-Tungaloy ISO designation: CPMT090308 Facts Insert size: 09 Plate thickness: 3.18 mm Corner radius: 0.8 mm Clearance (facing) angle: 11° Leading angle: 80° Special features Material: cemented carbide (Hartmetall) Coating: PVD Grade: AH6225 Insert shape: rhombic Hole: cylindrical hole with one‑side countersink (40°–60°) Chipbreaker: one‑sided Typical application: external and internal turning FAQ Is this insert suitable for stainless steels? Yes. The CPMT090308 AH6225 insert uses a PVD‑coated cemented carbide grade optimised for stainless steel machining, offering a balance of a sharp edge and stability for medium cutting conditions. Which toolholders are compatible with this ISO insert? Compatibility is determined by the ISO form, insert size (09), thickness (3.18 mm), hole style and tolerance class; the CPMT090308 fits ISO‑compatible holders designed for rhombic 09 inserts with an 11° clearance. How does the AH6225 grade affect performance? AH6225 provides enhanced wear resistance through its PVD coating while maintaining a sharp cutting edge, resulting in improved edge stability and longer tool life in mixed or variable turning conditions. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius helps produce a consistent surface finish and distributes cutting forces to reduce edge chipping during moderate depth‑of‑cut operations, supporting dimensional stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 090308 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH6235 and the ISO rhombic geometry for reliable performance on stainless steels and interrupted cuts; the robust 0.8 mm corner radius and secure clamping hole reduce breakout and support consistent tool life. Order directly via Metav Werkzeuge or consult the technical team for machining recommendations. CPMT 090308 AH6235 indexable insert for Turning — PVD-coated carbide, 80° rhombic, Tungaloy The CPMT090308 AH6235 is an ISO rhombic indexable insert intended for turning applications, optimised for stainless steel and resistant to interrupted cutting conditions. PVD-coated carbide grade AH6235 Optimised for stainless steel and interrupted cuts Rhombic ISO insert, 80° geometry, 0.8 mm radius Cylindrical hole with 40°–60° single-side countersink Durable coating and grade for reduced breakouts and longer runtimes The insert uses a PVD-coated carbide substrate in the AH6235 grade, a tougher formulation designed specifically for machining stainless steel and other challenging alloys. The PVD coating enhances edge strength and wear resistance, which lowers the risk of edge chipping during interrupted cuts and helps maintain a predictable wear pattern. This combination improves component quality and reduces unplanned tool changes, supporting more stable production cycles. ISO conformity and secure clamping for predictable set-up Manufactured to ISO standards, the plate’s rhombic form and defined 80° geometry allow straightforward matching to compatible holders. The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure reliable screw engagement and repeatable clamping. With clearly defined dimensions such as 3.18 mm plate thickness and standard tolerances, this solution simplifies tool inventory management and contributes to reproducible machining results. Geometry and corner radius tuned for finishing and interrupted operations The 0.8 mm corner radius balances strength and surface finish: it provides a robust cutting edge for intermittent engagement while still permitting high-quality surfaces in finishing passes. The one-sided chipbreaker supports controlled chip formation under varying feed and depth conditions; selection of the correct chipbreaker and holder rigidity will directly influence achievable surface quality and machining stability in both external and internal turning. Practical benefits for productive turning cells As part of an ISO insert system, this plate integrates with standard external holders, shims and clamping kits to reduce changeover time and minimise set-up variability. The tougher grade and coating combination aims to increase cutting edge life, which contributes to lower tool consumption and fewer interruptions. For process-planning, the insert’s characteristics support a rational approach to cycle-time reduction and consistent batch output. Contact Metav Werkzeuge for tailored application advice on Tungaloy AH6235 inserts and to request cutting-data recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6890172 Manufacturer SKU: TUN6890172 SKU: 6890172-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts ISO designation: CPMT090308 Insert size: 09 Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 3.18 mm Geometry angle: 80° Special features Material: carbide Coating: PVD-coated Grade: AH6235 Shape: rhombic Chipbreaker: one-sided Hole: with cylindrical hole and single-side countersink (40°–60°) Typical application: external and internal turning; interrupted cuts FAQ What materials is this insert best suited for? The CPMT090308 AH6235 insert is optimised for stainless steel and other materials prone to built-up edge; the AH6235 grade and PVD coating support interrupted cutting and improve edge stability. How does the AH6235 grade affect tool life? AH6235’s tougher carbide matrix with PVD coating increases resistance to chipping in the CPMT090308 insert, which often extends usable edge life under unstable cutting conditions. Which insert geometry should be matched with a holder? Select a holder designed for ISO rhombic plates with an 80° seating; correct relief angle and tolerance class alignment ensure secure clamping of the CPMT090308 insert. Can this insert be used for both external and internal turning? Yes, the insert’s geometry and chipbreaker are suitable for both external and internal turning operations when paired with the correct holder and machining parameters. What benefit does the 0.8 mm corner radius provide? The 0.8 mm radius offers a compromise between edge strength for interrupted cuts and the ability to achieve a good surface finish in finishing passes when using the CPMT090308 AH6235 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH6235 Wendeplatten - Tungaloy
Take advantage of a tough, PVD-coated carbide grade that resists chipping in interrupted cuts while maintaining wear resistance for stainless steels; order directly via Metav Werkzeuge or consult the team for holder and chipbreaker recommendations. CPMT 090308 AH6235 – ISO turning insert by Tungaloy, PVD‑coated carbide for turning The CPMT090308 AH6235 is an ISO‑format turning insert designed for external and internal turning, offering a tougher PVD‑coated carbide grade for stainless steels and interrupted cutting conditions. PVD-coated carbide grade AH6235 For stainless steel and interrupted cuts Rhombic ISO CPMT090308, 0.8 mm corner radius Cylindrical hole with one-sided countersink Optimised cutting performance for stainless steels The combination of a PVD-coated carbide substrate and the AH6235 grade delivers a balance of toughness and wear resistance tailored to machining stainless steel. The coating increases thermal and abrasion resistance while the tougher substrate reduces the risk of edge chipping during interruptions in the cut. This results in more predictable tool life and fewer unscheduled indexings, which supports a smooth production flow and reduces cost per part. The design is particularly suited to applications where material adhesion and work hardening are concerns. Stable edge geometry for reliable surface quality A rhombic ISO CPMT090308 geometry with a 0.8 mm corner radius and an 11° clearance creates a stable cutting edge that withstands moderate engagement and intermittent forces. The insert’s single-sided chipbreaker promotes controlled chip formation on softer and adhesive materials, improving surface finish and reducing built-up edge formation. The insert thickness of 3.18 mm and the 80° lead angle contribute to a secure clamping condition and reduced vibration, supporting consistent dimensional accuracy and repeatable results in series production. System compatibility that simplifies tool selection ISO standardisation ensures straightforward integration into existing tool systems, but compatibility depends on holder shape, clearance angle, tolerance class, fixing method, size and thickness. The cylindrical hole with a one‑sided countersink (40°–60°) provides positive, repeatable seating in many common clamping systems. Selecting the correct chipbreaker and the AH6235 grade for the workpiece stability and cutting conditions will extend life and reduce downtime. For complex setups or to match this insert to a specific holder, consult Metav Werkzeuge for tailored advice and verified component pairing. For tailored advice on the CPMT090308 AH6235 insert, and to ensure the correct holder and chipbreaker combination for a given application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to obtain application‑specific recommendations and availability Technical data Article number: 6903456 SKU: 6903456-Tungaloy Manufacturer SKU: TUN6903456 Model series: ISO turning indexable inserts Designation: CPMT090308 AH6235 Material: carbide Numbers / core technical data Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Lead angle: 80° Size: 09 Special features PVD-coated carbide, grade AH6235 Rhombic insert form Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Suited for stainless steel and interrupted cuts ISO designation CPMT090308 Compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ Which materials is this insert suitable for? The CPMT090308 AH6235 insert is formulated for machining stainless steel and performs well in interrupted cuts and applications with increased risk of edge breakage. How does the AH6235 grade improve productivity? The AH6235 PVD-coated carbide combines toughness and wear resistance, reducing unplanned indexings and extending life in demanding stainless‑steel turning operations. What are the key geometry specifications to consider? Key specifications include a 0.8 mm corner radius, 3.18 mm thickness, 11° clearance angle and an 80° lead angle, which together support edge stability and secure clamping. Is the insert compatible with standard ISO holders? The insert follows ISO designation CPMT090308, but compatibility requires a matching holder regarding form, clearance angle, tolerance class, fixing method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6235, a defined 0.8 mm nose radius and ISO CPMT090308 geometry for reliable turning of stainless steels and interrupted cuts; order directly via Metav Werkzeuge or request expert advice from our consultants. CPMT090308 AH6235 Tungaloy turning insert — ISO CPMT 090308 for external and internal turning CPMT090308 AH6235 is an ISO-format, PVD-coated carbide turning insert designed for robust performance in stainless-steel turning and interrupted cutting applications. ISO CPMT090308 geometry, rhombic 09 form PVD-coated carbide grade AH6235 11° clearance angle for stable cutting Cylindrical hole with 40°–60° countersink Consistent performance for stainless-steel turning The CPMT090308 AH6235 insert delivers a balance of toughness and wear resistance through its PVD-coated carbide substrate and the AH6235 cutting grade, optimised for stainless steel and operations prone to built-up edge or notch wear. The tougher coating chemistry reduces chipping during interrupted cuts and increases edge stability, which results in fewer unplanned tool changes and more predictable cycle times. This makes the component particularly suitable for series production where process consistency matters. Secure seating and reliable clamping minimise setup variables Designed with a cylindrical hole and one-sided countersink (40°–60°), the indexable plate ensures positive seating and repeatable clamping forces in compatible holders. The rhombic 09 form and the defined 11° clearance angle support stable contact between insert and toolholder, reducing vibration and improving surface finish on external and internal turning operations. Clear information on holder compatibility (form, relief, tolerance class, fastening, size and thickness) simplifies selection and reduces setup time. Geometry and edge preparations for interrupted cuts The insert’s 0.8 mm nose radius and the one-sided chipbreaker are aimed at combining good edge strength with chip control under varying depths of cut. The modest nose radius supports dimensional control while the chipbreaker directs swarf for easier removal, lowering the risk of re-cutting and workpiece damage. For applications with frequent entry and exit or interrupted profiles, this geometry helps maintain a stable cutting edge and reduces the likelihood of catastrophic edge failure. Practical choice for system integration and productivity As part of the ISO turning insert system, the plate works with matching external holders, adaptor pads and clamping sets; the standardised dimensions (ISO 090308, 3.18 mm thickness) allow rapid replacement and compatibility checks. The grade’s resistance to chipping means longer effective tool life in many stainless-steel operations, improving throughput and decreasing tooling logistics. Choosing the correct chipbreaker and holder combination will optimise process reliability and cost-efficiency. Contact Metav Werkzeuge for tailored application advice on the CPMT090308 AH6235 Tungaloy turning insert and confirmation of holder compatibility — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6890170 Manufacturer SKU: TUN6890170 SKU: 6890170-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: 090308 Size: 09 Thickness: 3.18 mm Nose radius: 0.8 mm Clearance angle: 11° Plate angle: 80° Special features PVD-coated carbide, grade AH6235 Rhombic plate form (09) One-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: Turning; suited to stainless steel and interrupted cuts Compatible with ISO-style holders; clamping depends on form, tolerance and fastening FAQ What materials is this insert suitable for? The CPMT090308 AH6235 Tungaloy turning insert is formulated for stainless steel machining and performs well in interrupted cuts or where edge breakout risk is elevated. How does the AH6235 grade behave under interrupted cutting? AH6235 is a tougher, PVD-coated carbide grade that resists chipping and offers improved edge stability during interrupted cutting, reducing unplanned tool changes. Which holder features are required for correct compatibility? Holder compatibility depends on insert form, 11° clearance angle, tolerance class, fastening method, size (09) and thickness (3.18 mm); the cylindrical hole and countersink ensure secure seating in matching ISO holders. Can this insert be used for both external and internal turning? Yes — the ISO CPMT090308 geometry and chip control features make the insert suitable for both external and internal turning applications when paired with the correct holder. What practical benefits result from the 0.8 mm nose radius? A 0.8 mm nose radius provides a compromise between edge strength and accuracy, supporting dimensional control while improving resistance to premature edge wear in roughing and finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH725 Wendeplatten - Tungaloy
Reliable process security and a universal AH725 grade deliver consistent tool life and versatile performance for steel and stainless steel turning; combined with a stable clamping design and ISO compatibility, this insert supports reliable batch production—order via Metav Werkzeuge or consult the technical team for application advice. CPMT 090308 AH725 Tungaloy indexable insert for turning, PVD-coated carbide A CPMT 090308 AH725 Tungaloy indexable insert designed for ISO-standard external and internal turning, offering a fracture-resistant grade and stable clamping for mixed-steel machining. ISO-standard rhombic insert 09 size PVD-coated carbide AH725 for steels One-sided chipbreaker for secure cutting Countersunk centre hole for stable clamping Reliable performance for mixed-steel production The AH725 PVD-coated carbide grade delivers a balanced combination of wear resistance and toughness, making it suitable for machining steel and stainless steel under varying conditions. The universal, fracture-resistant composition reduces the risk of unexpected edge breakouts when changing workpiece materials or switching to smaller tooling setups. This translates into fewer tool changes, less unplanned downtime and more consistent cycle times—advantages that directly support production efficiency and process reliability. Geometry and clamping that ensure repeatable results Designed as a rhombic 09 insert with an included angle of 80°, this indexable plate provides predictable cutting engagement and good access in confined turning and boring situations. The 0.8 mm corner radius and 11° clearance angle contribute to robust edge strength and stable cutting forces, while the 3.18 mm thickness and the cylindrical centre hole with a single-side countersink (40°–60°) enable stable clamping and repeatable positional accuracy. Compatibility with holders depends on form, clearance, tolerance class, fastening, size and thickness, so choosing the correct seat and clamping kit maintains surface finish and dimensional stability. Practical selection and system integration for turning operations For efficient integration into the tooling system, match the one-sided chipbreaker and the AH725 grade to the workpiece material and machining stability. Typical use cases include external roughing and finishing as well as internal turning when tool overhang and rigidity are controlled. The ISO-standard system comprises the indexable insert, a compatible turning holder or boring bar, a seating pad/clamping kit and replacement screws—together these elements ensure secure fastening and consistent chip control. The CPMT 090308 AH725 insert offers a pragmatic balance between tool life and process security, supporting predictable production outputs. For robust, high-process-security turning tasks, specify the Tungaloy AH725 CPMT 090308 insert and contact Metav Werkzeuge for availability and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6856706 Manufacturer SKU: TUN6856706 Label: CPMT090308 AH725 Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Plate thickness: 3.18 mm Plate size: 09 Special features Material: carbide Coating: AH725 (PVD) Plate form: rhombic Hole style: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Model series: ISO turning indexable inserts Application: turning FAQ What materials is this insert suitable for? The CPMT 090308 AH725 insert is specified for machining steel and stainless steel; the AH725 grade offers a balance of wear resistance and fracture toughness for mixed-material batches. How does the insert ensure secure clamping in the holder? A cylindrical centre hole with a single-side countersink (40°–60°) and a plate thickness of 3.18 mm provide stable seating and repeatable clamping, maintaining the insert position under cutting loads. Which operations are typical for this insert? Typical applications include external and internal turning where a rhombic 09 geometry and an 80° included angle provide access and consistent chip formation for finishing and light roughing. What role does the AH725 coating play? The PVD AH725 coating improves wear resistance while retaining toughness, reducing the likelihood of edge chipping and supporting consistent tool life across varying steels. How should the chipbreaker be matched to the process? Select the one-sided chipbreaker based on workpiece material, depth of cut and rigidity of the setup; this insert’s chipformer is designed to stabilise chip flow and enhance process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH725, reliable chip control and a compact 0.8 mm corner radius for stable turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 090308 AH725 rhombic indexable turning insert by Tungaloy — PVD-coated carbide, 11° clearance CPMT 090308 AH725 is a rhombic ISO indexable insert for general turning tasks, designed for secure clamping and consistent chip formation in steel and rostfreier Stahl applications. PVD-coated carbide AH725 grade Universal grade for steel and rostfreier Stahl 0.8 mm corner radius for precise profiles 11° clearance angle, rhombic 09 form Cylindrical hole with single-sided countersink Precision and process stability for demanding turning work The PVD-coated carbide AH725 grade is engineered to combine wear resistance with reliable edge behaviour, which results in consistent component quality during both external and internal turning. The rhombic plate geometry and 11° clearance reduce rubbing and help maintain a stable cutting edge, so machining cycles run with fewer interruptions. For workshops seeking high process security, this insert offers a balance between tool life and finish quality, particularly when alternating between different steels and rostfreier Stahl. Versatility across common materials with controlled chip formation Thanks to its single-sided chipbreaker and the universal properties of AH725, the insert is suitable for a broad range of steels and rostfreier Stahl where small to medium-sized tools are used. The design supports predictable chip control under changing cutting conditions, which simplifies setup and reduces the need for frequent tool changes. For operations that prioritise throughput, choosing a grade optimised for mixed-material runs reduces downtime and improves overall productivity. Mounting, compatibility and dimensional clarity The ISO designation 090308 refers to the plate format and identifies the insert dimensions for holder compatibility. With a plate thickness of 3.18 mm, corner radius of 0.8 mm and the presence of a cylindrical hole with a 40°–60° single-sided countersink, the insert mates with standard ISO rhombic holders when form, free angle, tolerance class and fastening match. Verifying holder fit by these parameters ensures correct seating and repeatable clamping, minimising vibrations and enabling consistent surface finish. Practical benefits for workshop efficiency Using this rhombic insert can shorten index times and contribute to a more predictable tool-change routine, which in turn supports leaner production cycles. The combination of PVD coating and a fracture-resistant substrate reduces edge breakdown, helping to maintain dimensional accuracy across batches. For manufacturers aiming to lower variance and improve first-pass yield, the insert’s characteristics translate directly into fewer reworks and steadier throughput. Contact Metav Werkzeuge for tailored selection advice on the Tungaloy CPMT 090308 AH725 insert and to confirm holder compatibility — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6856775 Manufacturer SKU: TUN6856775 SKU: 6856775-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: CPMT090308 Grade/sort: AH725 Facts Angle: 80° Clearance angle: 11° Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 09 Special features Rhombic plate form Cylindrical hole + one-sided countersink (40°–60°) PVD-coated carbide (AH725) Single-sided chipbreaker Intended for external and internal turning FAQ What materials is this insert suitable for? This insert in AH725 grade is designed for machining a range of steels and rostfreier Stahl, offering a good compromise between wear resistance and edge stability for mixed-material production. How does the plate secure to a holder? The insert uses a cylindrical hole with a single-sided countersink and matches ISO holder interfaces when form, free angle and tolerance are consistent with the CPMT 090308 AH725 geometry. Is the corner radius suitable for finishing work? The 0.8 mm corner radius provides accurate profile control and can be used for fine finishing where small radii contribute to the required surface geometry. Can the insert be used for both external and internal turning? Yes, the rhombic form and chipbreaker design support both external and internal turning applications when paired with the correct holder and machining parameters. What are the main advantages of the AH725 coating and substrate? AH725’s PVD-coated carbide construction provides improved wear resistance and reliable edge behaviour, enhancing process security during continuous or mixed-operation machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AH725 Wendeplatten - Tungaloy
High stability and universal applicability result from the PVD-coated AH725 grade and the robust rhombic geometry with a 0.8 mm corner radius, delivering consistent part finish and extended tool life. Combine reliable chip control and ISO compatibility for efficient turning operations. Order the CPMT 090308 AH725 directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CPMT 090308 AH725 ISO turning insert — PVD-coated, 0.8 mm radius (Tungaloy) The CPMT 090308 AH725 is a rhombic ISO turning insert designed for external and internal turning, offering process security for machining a range of steels and rostfreier Stahl. PVD-coated AH725 grade for steels Universal, chip-resistant carbide Rhombic CPMT 09 shape, 0.8 mm radius Cylindrical hole with countersink 40°–60° Secure cutting performance for mixed steels This grade combines a PVD-coated surface with a tough carbide substrate to provide reliable edge strength and wear resistance. The AH725 composition is developed for universal use across Stahl and rostfreier Stahl, reducing the need for frequent insert changes when workpiece materials vary. The engineered coating lowers friction and increases oxidation resistance during elevated cutting temperatures, which translates into steadier cutting forces and a longer usable life for the cutting edge. Such material and coating choices support higher process stability and predictable production output. Geometry that balances strength and surface quality The insert’s rhombic form with an 80° main angle and 11° clearance offers a compromise between rigidity and accessibility for varied turning tasks. The 0.8 mm corner radius gives a controlled cutting edge for general turning and light finishing, improving part surface integrity without sacrificing edge life. Because a larger corner radius can distribute cutting loads more evenly, this geometry helps avoid premature edge failure when feeds or engagement angles vary. The specified thickness and shape maintain mechanical stability in standard ISO-compatible holders, contributing to repeatable dimensional results in batch production. Stable chip control and straightforward integration Equipped with a single-sided chipbreaker, the insert promotes consistent chip formation and evacuation under typical turning conditions, aiding tool life and machine cleanliness. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping while facilitating simple insert replacement; matching the holder’s form, free angle, tolerance class, fixation and size is sufficient for proper fit. With a 3.18 mm thickness and standard ISO designation, the component integrates smoothly into common turning systems composed of an insert, an appropriate external holder or boring bar, a shim or clamp set, and replacement screws. For reliable turning performance with Tungaloy’s AH725 grade, contact Metav Werkzeuge for stock status and tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and delivery options. Technical data Article number: 6864894 Manufacturer item number: 6864894 Manufacturer SKU: TUN6864894 SKU: 6864894-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Angle: 80° Clearance (frewinkel): 11° Corner radius: 0.8 mm Thickness: 3.18 mm Size: 09 Special features PVD-coated AH725 grade Single-sided chipbreaker Rhombic insert form (CPMT) Hole: cylindrical + one-sided countersink (40°–60°) Application: Drehen (turning) Suitable for Stahl and rostfreier Stahl ISO-compatible insert FAQ Which materials can be machined with this insert? The CPMT 090308 AH725 insert from Tungaloy is optimised for machining a wide variety of Stahl and rostfreier Stahl, offering a balance between wear resistance and fracture toughness for mixed-workpiece environments. Is the insert compatible with standard ISO turning holders? Yes; the CPMT geometry and ISO designation mean compatibility depends on matching form, free angle, tolerance class, fixation, size and thickness — the CPMT 090308 AH725 fits common ISO external holders and boring bars when these parameters align. What benefits does the AH725 grade provide compared with uncoated grades? AH725’s PVD-coated surface improves oxidation resistance and reduces friction, which extends tool life and enhances process security compared with uncoated carbide grades under comparable turning conditions. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker on this insert promotes stable chip formation and evacuation, reducing the risk of built-up edge and improving surface finish during turning operations with the CPMT 090308 AH725. What operations suit the 0.8 mm corner radius? A 0.8 mm corner radius is suitable for general turning and light finishing, providing a compromise between edge strength and the ability to produce fine surface finishes without increased burr formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 090308 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high‑finish capability and consistent wear resistance offered by the coated cermet AT9530 in an ISO‑standard geometry; the insert delivers reliable finishing and light‑machining productivity. Order directly via Metav Werkzeuge or consult the team for holder compatibility and process optimisation. CPMT 090308 AT9530 turning insert by Tungaloy — coated cermet for fine finishing CPMT 090308 AT9530 is an ISO‑normed turning insert designed for finishing and light machining in steel applications, offering a balanced geometry for stable cutting and superior surface quality. Coated cermet AT9530 ISO CPMT090308 rhombic insert 11° clearance for stable cutting 0.8 mm corner radius for fine finish Achieving consistent surface quality with a specialised grade The combination of a coated cermet AT9530 cutting material and a precision geometry targets finishing and light machining where surface integrity matters. The coating promotes even wear, which reduces the frequency of index changes and maintains a consistent profile across batches. For operators aiming for reproducible part finish in serial work, this results in fewer re‑works and more predictable process windows. The insert’s geometry supports low‑vibration engagement, translating the material advantages into tangible throughput improvements without sacrificing finish quality. Secure clamping and ISO compatibility for reliable set‑ups Manufactured to ISO specifications, the CPMT 090308 form requires a holder that matches the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness to ensure repeatable positioning. The insert’s 11° clearance and standardised seat dimensions simplify integration into existing toolholders when the correct holder pocket and clamp are used. Correct matching reduces runout and improves tool life, while the standard format allows straightforward replacement and inventory management across multiple machines. Geometry and chip control engineered for finishing passes The rhombic shape with a 0.8 mm corner radius and 3.18 mm thickness combines rigidity with a fine cutting edge suitable for finishing cuts. The design includes a cylindrical hole with a single‑sided countersink (40°–60°) to ensure secure seating and clamp stability. A single‑sided chipbreaker assists with controlled chip formation during light cuts, which supports consistent surface texture and reduces the risk of edge build‑up on the insert. Together, these features make the insert well suited to precision external and internal turning operations with a focus on surface finish. Practical selection and application guidance for efficient machining Select the chipbreaker profile and the AT9530 grade to match material, machining method and component stability: choose this coated cermet for steels where finishing and uniform tool wear are priorities. The insert is intended for turning operations where gentle engagement and steady cutting conditions prevail; it performs especially well in finishing and light‑cut scenarios. For complex component set‑ups or where vibration control is critical, consult technical data or the supplier to ensure the correct holder and clamping components are specified to exploit the insert’s benefits fully. Contact Metav Werkzeuge for tailored advice on integrating the CPMT 090308 AT9530 insert into finishing and light‑machining processes—request process recommendations or a compatibility check via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6773736 Manufacturer SKU: TUN6773736 SKU: 6773736-Tungaloy Name: CPMT090308 AT9530 Tungaloy insert Core dimensions Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Thickness: 3.18 mm Size: 09 Special features Cutting material/coating: AT9530 (coated cermet) Substrate: cemented carbide Shape: rhombic Hole style: cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal), finishing and light machining FAQ Is this insert suitable for finishing steel? The CPMT 090308 AT9530 insert is optimised for finishing and light machining of steel, where the AT9530 coating promotes uniform wear and a superior surface finish. Which toolholders are compatible with this insert form? Compatibility requires an ISO‑compliant holder matching the insert form, clearance angle, tolerance class, fastening method, size and thickness—ensure the holder accepts the CPMT090308 geometry for secure seating. What advantages does the AT9530 coating offer? The AT9530 coated cermet provides even wear and stable cutting edges, supporting consistent part quality and extended intervals between indexing or replacement. How is the insert mounted given the hole style? The cylindrical hole with a single‑sided countersink (40°–60°) is intended for clamp or screw fastening together with an underlay; correct clamp selection ensures repeatable clamping and minimal runout for the Tungaloy insert (SKU 6773736‑Tungaloy). Can this insert be used for internal turning operations? Yes, the geometry and chip control of the CPMT090308 make it suitable for both external and internal turning when matched with the appropriate holder and stable set‑up. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com