DCET 11T300 SH730 Wendeplatten - Tungaloy
Take advantage of reliable, repeatable turning performance thanks to the SH730 coated carbide grade and the ISO‑compatible rhombic geometry; the combination improves process stability and reduces tool change frequency. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. DCET 11T300 SH730 turning indexable insert by Tungaloy — rhombic 55° geometry, coated carbide grade for stable cutting DCET11T300 SH730 is an ISO‑standard rhombic indexable insert designed for general turning tasks, offering a robust cutting edge for variable engagement conditions and compatibility with standard external and internal turning holders ISO‑standard rhombic insert, 55° cutting angle SH730 coated carbide for stable cutting edges 3.97 mm nominal thickness for secure clamping Cylindrical hole with one‑sided countersink (40°–60°) Consistent metal removal with a tough coated carbide grade The SH730 grade is a coated carbide formulation developed for turning where edge stability under changing engagement is crucial. In practice, this means longer periods between index changes and fewer unplanned stoppages. The rhombic geometry with a 55° cutting angle provides a versatile compromise between strength and access, beneficial for external and internal operations where tool approach varies. Choosing a grade engineered for toughness helps maintain dimensional control when conditions fluctuate. Secure clamping and ISO compatibility reduce setup uncertainty Built to ISO dimensions and the 11T300 specification, the insert guarantees interchangeability with matching ISO toolholders; compatibility depends on form, 7° relief angle, tolerance class, fastening method, size and thickness. The 3.97 mm thickness and the central cylindrical hole with a one‑sided countersink (40°–60°) ensure reliable seating and repeatable clamping. Reliable clamping improves repeatability across batches and simplifies tool change procedures on production lines. Practical chip control and selection guidance for reliable results A single‑sided chipbreaker is integrated to support predictable chip formation when paired with the correct grade and cutting parameters. For small‑tool applications or changing cut depths, the combination of SH730 toughness and a dedicated chipformer helps avoid unstable chip behaviour. Select the chipbreaker style and cutting data that match the machined material and operation to gain the efficiency benefits of this insert. Application focus and process benefits for workshops Designed primarily for turning, the ISO‑compliant insert suits a variety of standard turning tasks where process stability and tool life are priorities. Use in setups that require quick indexable changes, accurate repositioning and consistent surface finish. The insert’s balance of cutting‑edge strength and ISO compatibility supports reduced machine downtime and predictable production throughput. For dependable turning performance with Tungaloy’s SH730 grade, contact Metav Werkzeuge for application advice and fast supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856748 Manufacturer SKU: TUN6856748 Merchant SKU: 6856748-Tungaloy Article name: DCET11T300 SH730 Tungaloy turning insert Brand: Tungaloy Facts Size: 11 mm Thickness: 3.97 mm Cutting angle: 55° Relief angle: 7° Special features Rhombic insert geometry Coated carbide grade SH730 One‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) ISO‑standard turning insert, 11T300 specification Application: turning (external and internal) FAQ What turning tasks suit this insert best? The DCET11T300 SH730 turning insert is intended for standard external and internal turning where a balanced combination of edge strength and accessibility is required, especially in operations with variable entry conditions. How does the SH730 grade affect tool life? The SH730 coated carbide provides enhanced edge stability under fluctuating cutting conditions, which supports longer periods between indexing and contributes to steadier tool life in routine turning applications. What ensures compatibility with existing holders? Compatibility is achieved through adherence to ISO dimensions and depends on insert form, 7° relief angle, tolerance class, fastening method, size and 3.97 mm thickness; selecting a holder matching these parameters ensures secure clamping. Which chip control features are included? This insert features a single‑sided chipbreaker designed to produce predictable chips when matched with appropriate cutting data and material selection. What is the SKU for ordering and identification? The merchant SKU for the DCET11T300 SH730 turning insert is 6856748-Tungaloy and the manufacturer SKU is TUN6856748. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T300 SH730 Wendeplatten - Tungaloy
Benefit from the combination of coated carbide SH730, precise 7° relief and rhombic 55° geometry for stable, repeatable turning results; ideal where edge stability and variable engagement are decisive. Order the DCET11T300 SH730 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCET11T300 SH730 DCET 11T300 turning insert — Tungaloy, rhombic 55° with 7° relief The DCET11T300 SH730 is an ISO rhombic turning insert designed for external and internal turning, offering a tough, edge-stable coated carbide grade suited to smaller tools and variable cutting conditions. Coated carbide grade SH730 Rhombic 55° geometry, 7° relief 11 mm size, 3.97 mm thickness Cylindrical hole with 40°–60° countersink Reliable cutting performance from a tough, coated carbide grade The insert combines a coated carbide SH730 substrate with an ISO rhombic geometry to deliver stable cutting where engagement can change during a pass. The SH730 grade is formulated for toughness and edge stability, which reduces chipping risks when using smaller holders or when intermittent cuts occur. By choosing a single-sided chipbreaker matched to the workpiece and machining strategy, the component assures consistent chip formation and improved tool life, helping to maintain throughput and reduce unscheduled tool changes. Precise geometry and clamping for consistent results Designed to ISO conventions, compatibility with the toolholder is defined by shape, relief angle, tolerance class, fastening and plate thickness. The combination of a rhombic 55° seating and 7° relief supports accurate approach angles while the cylindrical hole with a single-sided countersink (40°–60°) secures repeatable clamping. The insert’s 11 mm inscribed size and 3.97 mm thickness offer a compact profile that suits lighter overhangs and rigid set-ups; the standardised form simplifies replacement and toolroom inventory management. Practical machining advantages and selection guidance For turning tasks on a wide range of steels and alloyed materials, opt for the SH730 variety when a compromise of toughness and wear resistance is required. The rhombic shape provides access to both external and internal contours with stable cutting angles, while the single-sided chipbreaker promotes predictable chip flow. Select a holder that matches form and tolerance to exploit the insert’s properties; where vibration or interrupted cuts are frequent, the SH730 grade’s resilience lowers the likelihood of premature edge failure, supporting higher overall process reliability. For demanding turning applications choose the Tungaloy DCET11T300 SH730 insert for dependable edge stability — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856651 SKU: 6856651-Tungaloy Manufacturer SKU: TUN6856651 Manufacturer: Tungaloy Model series: ISO turning inserts Designation: DCET11T300 Key figures Geometry angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 Countersink angle: 40°–60° Special features Coated carbide (SH730) Rhombic insert Single-sided chipbreaker Cylindrical hole with one-sided countersink ISO-standardised turning insert For external and internal turning FAQ What is the primary application for this insert? The DCET11T300 SH730 is intended for turning operations, suitable for both external and internal turning tasks where edge stability under variable engagement is required. Which materials suit the SH730 grade best? SH730 is a tough, edge-stable coated carbide grade that performs well on a broad range of steels and alloyed materials, especially where smaller tool sizes or changing cut conditions occur. How does the insert fix to the holder? Clamping uses the cylindrical hole with a single-sided countersink (40°–60°); correct holder selection and matching tolerance class ensure repeatable, secure mounting. What advantages does the rhombic 55° shape provide? A rhombic 55° geometry allows versatile approach angles for external and internal contours, offering good access and stable cutting forces for varied turning tasks. Is this an ISO-compliant product and why does that matter? Yes — the insert follows ISO conventions, which simplifies compatibility with standard holders and eases toolroom logistics for replacement and inventory control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of proven edge stability, ISO compatibility and straightforward mounting for consistent turning results; the robust SH725 coating and compact geometry support productive machining with small tools. Order the insert directly via Metav Werkzeuge or request tailored advice from our consultants. DCET 11T301 SH725 indexable insert for turning by Tungaloy — 55° rhombic, 7° clearance DCET11T301 SH725 is an ISO‑design turning indexable insert engineered for general external and internal turning where small‑tool performance and edge stability under variable engagement are required. SH725 coated carbide for edge stability 55° rhombic geometry for versatile turning 7° clearance for reliable cutting contact Cylindrical hole with single‑side countersink High‑performance turning with a durable coated grade The insert combines a coated carbide substrate with the SH725 grade to deliver a balance of toughness and wear resistance that suits interrupted cuts and varying engagement conditions. The indexable insert construction allows fast seat changes and predictable repeatability, reducing downtime and improving process stability. With a 0.1 mm nose radius the insert supports fine finishing while the robust grade helps maintain a consistent cutting edge over longer tool life, which in turn lowers tool change frequency and contributes to overall productivity gains. Compatibility and mounting explained for reliable integration Compatibility with toolholders is governed by form, clearance, tolerance class, fastening method, size and thickness. The ISO designation 11T301 describes the insert geometry and pocket fit: a rhombic shape with a 55° approach angle offers good access on both external and internal contours. The insert is supplied with hole and a cylindrical hole with single‑side countersink (40°–60°) to suit standard clamp systems; ensure the seat and screw match the insert thickness of 3.97 mm and the 11 mm inscribed circle when selecting a holder. These clear, measurable parameters simplify integration into existing tool systems and help avoid mounting errors that can affect concentricity or run‑out. Practical selection and machining benefits for shop floor use A single‑side chipbreaker makes the insert particularly suitable for controlled chip formation in many turning scenarios, while the moderate 7° clearance angle reduces rubbing and promotes a stable cutting action. The geometry and grade are optimised for use with smaller tools or when cutting conditions change frequently, providing a good compromise between finishing capability and robustness. For users transitioning from a different grade or for specific materials, technical guidance is available to match the SH725 grade and chipbreaker to the workpiece material and machine dynamics, ensuring consistent surface quality and process reliability. Contact Metav Werkzeuge for personalised advice on selecting the right Tungaloy turning insert and to confirm current availability and delivery options Technical data Article number: 6737055 Dimensions & angles Size (inscribed circle): 11 mm Thickness: 3.97 mm Nose radius: 0.1 mm Approach angle: 55° Clearance angle: 7° Materials & features Material: coated carbide (cemented carbide) Grade: SH725 Shape: rhombic Hole: cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: single‑side Series: ISO turning indexable inserts Application: turning (external and internal) FAQ What materials is this insert suitable for? The SH725 grade is a tough, edge‑stable coated carbide intended for a broad range of steels and mixed applications; the DCET 11T301 insert performs well where variable engagements or interrupted cuts occur. How is the insert mounted in a holder? The insert uses a central hole with a cylindrical bore and a single‑side countersink (40°–60°); mounting requires a compatible seat, clamp kit and the correct screw to match the 3.97 mm thickness and ISO 11T301 geometry. Can this insert be used for internal turning? Yes; the 55° rhombic geometry and compact size make it suitable for both external and internal turning operations, provided the holder offers the necessary reach and clearance. What benefits does the SH725 coating offer compared with uncoated grades? The coated SH725 grade enhances edge life and wear resistance while maintaining sufficient toughness for small‑tool applications, which reduces frequent index changes and supports more stable production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
High edge stability from the SH725 coated carbide grade, combined with the rhombic 55° geometry and a 0.1 mm corner radius, delivers consistent turning performance and reduced rework. Order the DCET11T301 SH725 turning insert directly via Metav Werkzeuge or ask our consultants for compatibility and availability. DCET 11T301 SH725 DCET ISO turning insert for turning, 55° — Tungaloy The DCET11T301 SH725 is an ISO rhombic turning insert designed for external and internal turning, offering a 55° cutting geometry and engineered for stable edge performance. SH725 coated carbide grade Rhombic insert with 55° geometry 0.1 mm corner radius One-sided chipbreaker and countersunk hole Consistent cutting performance through a tough carbide grade The rhombic indexable insert combines a coated carbide composition with the SH725 grade to prioritise edge stability under varying engagement conditions. The result is fewer unexpected edge failures and a more predictable service life, which supports efficient batch processing and shorter set-up cycles. The 55° geometry reduces radial cutting forces for many external and internal turning tasks, while the small 0.1 mm corner radius allows for fine surface finishes when light finishing passes are required. Clear compatibility rules for rapid tool selection Compatibility with clamping systems is governed by form, free clearance angle, tolerance class, fastening, size and thickness; matching these parameters avoids incorrect assembly. The rhombic shape with a cylindrical hole and single-side countersink (40°–60°) ensures secure clamping in ISO-standard holders, while the plate thickness of 3.97 mm adds rigidity for steady cutting. The insert is supplied as part of a system that typically includes a suitable external holder or boring bar, a backing pad/clamp kit and replacement screws for quick installation. Practical chip control and workshop advantages A one-sided chipbreaker simplifies chip formation for many turning operations, improving evacuation and reducing the risk of built-up edge. The moderate plate size (11 mm) and the balanced geometry make this insert particularly effective in smaller tooling assemblies or where entry conditions change frequently. Fewer tool changes and stable cutting edges support higher uptime and more consistent part quality, making the insert a pragmatic choice for production and prototype work where predictability matters. For reliable high-performance turning with the SH725-coated carbide insert from Tungaloy, contact Metav Werkzeuge for technical advice or to check stock and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6737079 SKU: 6737079-Tungaloy Manufacturer SKU: TUN6737079 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Geometry angle: 55° Free clearance angle: 7° Corner radius: 0.1 mm Plate size: 11 mm Plate thickness: 3.97 mm Hole style: with hole Countersink: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide (Hartmetall) Grade: SH725 (coated carbide) Shape: rhombic Chipbreaker: one-sided Application: turning (external and internal) System components: ISO insert, matching external holder or boring bar, backing pad/clamp kit, replacement screws FAQ Is this insert suitable for external and internal turning? Yes. The DCET11T301 SH725 insert is specified for both external and internal turning tasks, using its 55° rhombic geometry to balance accessibility and cutting stability. What are the benefits of the SH725 grade? The SH725 grade on the DCET11T301 offers a tough, edge-stable performance intended for variable engagement conditions, which supports longer useful life and fewer unexpected edge failures. How is compatibility with a toolholder checked? Compatibility is determined by form, free clearance angle, tolerance class, fastening method, size and thickness; these parameters should be matched to the holder before mounting the insert. Why does the corner radius matter? A 0.1 mm corner radius reduces peak cutting forces during finishing passes and contributes to better surface quality while still allowing precise dimensional control. Does the insert include a hole and what is the countersink specification? Yes. The insert is supplied with a cylindrical hole and a one-sided countersink designed to 40°–60°, enabling reliable clamping in ISO-compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Combining ISO-standard geometry with a tough, coated carbide SH725 grade, this insert delivers stable cutting edges and consistent chip control for turning operations. With a 55° rhombic form and a 0.1 mm corner radius it is especially suited to small tools and variable engagement conditions; order directly via Metav Werkzeuge or consult our specialists for application guidance. DCET 11T301 SH725 ISO turning indexable insert — Tungaloy, coated carbide, 55° The DCET11T301 SH725 is an ISO-standard indexable insert engineered for external and internal turning, offering a rhombic 55° geometry and a tough coated carbide grade for dependable edge stability. Coated carbide grade SH725 ISO 11T301 form, 55° approach angle 0.1 mm corner radius Single-sided chipbreaker Cylindrical hole with 40°–60° countersink Productive turning through controlled geometry The combination of a 55° rhombic geometry and a 0.1 mm corner radius creates a reliable cutting edge that balances strength and finish. This geometry reduces vibration on small-diameter tooling while maintaining accessibility in confined profiles, so a single insert can serve multiple turning tasks. The coated carbide construction of the SH725 grade provides improved resistance to edge chipping and reliable performance under fluctuating engagement conditions, translating into fewer indexings and steadier cycle times. Compatibility engineered for ISO holder systems Compatibility with standard holders is determined by shape, clearance angle, tolerance class, clamping method, size and thickness. The insert’s 7° clearance angle and 3.97 mm thickness match common ISO holders for secure seating and repeatable positioning. Because the system conforms to established ISO dimensions, the insert integrates easily into existing toolholders and boring bars; adapting tool selection to holder form and tightening specifications ensures repeatable tool life and process stability. Coating and chip control designed for real-world turning The SH725 coating and substrate combination was selected for a tough, edge-stable performance that favours interrupted cuts and changing cutting conditions. The single-sided chipbreaker improves chip formation on a wide material range when the correct grade and breaker are selected, reducing manual chip handling and machine downtime. Where surface quality and tool life matter, choosing a grade with robust edge stability like SH725 supports longer uninterrupted runs and consistent part quality. Practical choice and application guidance For external and internal turning applications, this insert suits both roughing and finishing when the geometry and grade match the workpiece and process parameters. The cylindrical hole with a 40°–60° countersink ensures secure clamping and positional accuracy within the holder assembly. When in doubt about matching chipbreaker and grade to a specific workpiece, selecting a slightly tougher grade and verifying cutting data on test pieces reduces risk and improves initial outcomes. For reliable edge stability from Tungaloy’s SH725 grade, order the DCET11T301 via Metav Werkzeuge or contact our specialists at Metav Werkzeuge for tailored application advice (info@metav-werkzeuge.com, +49 2822 7131930) Technical data Article number: 6737084 SKU: 6737084-Tungaloy Manufacturer SKU: TUN6737084 Numbers / Core technical data Size: 11 Thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Approach angle: 55° Designs / Special features Rhombic insert form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Coated carbide, grade SH725 ISO turning indexable insert suitable for external and internal turning FAQ What materials can this insert machine effectively? The DCET11T301 SH725 insert is designed as a general-purpose turning grade; the SH725 coated carbide performs well across a broad range of steels and mixed materials where a tough, edge-stable grade is required. How does the 0.1 mm corner radius affect finish and strength? A 0.1 mm corner radius on the DCET11T301 increases edge strength compared with a sharper radius, improving resistance to chipping while still supporting acceptable surface finish in finishing passes. Is this insert compatible with existing ISO toolholders? Yes. The ISO 11T301 form and specified thickness, clearance angle and hole style ensure compatibility with standard ISO toolholders when the corresponding tolerance class and clamping hardware are used. Can the single-sided chipbreaker handle interrupted cuts? The single-sided chipbreaker on the DCET11T301 SH725 is suited to variable engagement and interrupted cuts; pairing the insert with appropriate cutting data enhances chip control and tool life. Which parameters should be checked when fitting the insert to a holder? Verify holder form, clearance angle (7°), size (11), thickness (3.97 mm), clamping method and tolerance class to ensure the DCET11T301 seats correctly and repeats position after indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Combining the SH725 coated carbide grade with a 0.1 mm corner radius and ISO‑rhombic geometry delivers reliable edge stability and consistent chip control for turning operations; these characteristics suit both external and internal machining tasks. Order the DCET11T301 SH725 insert directly via Metav Werkzeuge or ask our consultants if needed. DCET 11T301 SH725 Turning indexable insert by Tungaloy The DCET11T301 SH725 is an ISO‑standard rhombic turning insert designed for versatile external and internal turning, offering a tough coated‑carbide grade for stable cutting under variable entry conditions. ISO rhombic insert, 11 mm size SH725 coated carbide grade 0.1 mm corner radius 7° clearance angle Cylindrical hole with countersink Stable cutting performance for varied turning tasks The combination of the SH725 coating and the carbide substrate provides a balance of toughness and wear resistance that supports reliable cutting under mixed engagement conditions. This grade is formulated for edge stability, particularly useful when small inserts or varying cut depths are required. The ISO conformity of the geometry ensures predictable behaviour in standard holders; matching by form, clearance and tolerance class helps to maintain repeatable cutting results and reduces the risk of unexpected tool behaviour. Geometry that improves chip control and surface finish The rhombic plate form with a one‑sided chipbreaker is optimised to direct chips away from the cutting edge and the workpiece, improving process security and reducing manual intervention. The 0.1 mm corner radius and the 55° included angle deliver a compromise between edge strength and dimensional control, supporting fine finishing passes as well as light interruption cuts. The cylindrical hole with a single‑side countersink (40°–60°) enables secure clamping and consistent positioning in compatible clamping systems. Practical benefits for productivity and tool life By choosing this insert, production benefits include longer stable cutting intervals and fewer insert changes, which contributes to higher machine uptime and lower cycle‑time variability. The 7° clearance angle reduces rubbing on the flank face and helps to maintain the specified surface quality across repeated passes. Selecting the appropriate chipbreaker and grade for the workpiece material will further extend tool life and improve cost efficiency per component. Integration and selection guidance for workshop use The insert is part of an ISO‑based system: the overall setup requires a matching outer holder or boring bar, an underlay/clamping set and the correct fastening screws. Compatibility depends on plate form, clearance angle, tolerance class, attachment method, size and plate thickness (3.97 mm). For operations that combine external and internal work, the combination of SH725 toughness and the rhombic geometry simplifies selection and reduces tool inventory complexity while maintaining machining reliability. Contact Metav Werkzeuge today for tailored advice on using the DCET11T301 SH725 turning insert in specific turning applications and to discuss compatible holders or clamping sets Technical data Article number: 6737054 SKU: 6737054-Tungaloy Manufacturer SKU: TUN6737054 Model series: ISO‑Drehwendeschneidplatten Data Corner radius: 0.1 mm Included angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 Special features SH725 coating Carbide substrate Rhombic plate form One‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) ISO designation: DCET11T301 Application: Turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is the insert suitable for? The DCET11T301 SH725 insert is a coated carbide grade intended for a broad range of turning tasks; select the chipbreaker and grade to match specific workpiece materials for optimal results. How is the insert fixed in a holder? The DCET11T301 features a cylindrical hole with a single‑side countersink and is clamped into compatible ISO holders that match the plate form, thickness and tolerance class. What advantages does the SH725 grade offer? SH725 provides good edge stability and toughness for varying engagement conditions, offering consistent cutting performance especially with smaller tools or variable cuts. Can the insert be used for internal and external turning? Yes, the geometry and grade are suitable for both external and internal turning when used with appropriate holders and cutting parameters. Is the DCET11T301 compliant with ISO standards? The insert is ISO‑designated and intended for use in holders and systems conforming to ISO specifications for turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coating for improved edge stability, precise ISO compatibility and a compact rhombic form designed for productive turning operations; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. DCET 11T301 SH725 ISO turning insert — DCET series for Drehen by Tungaloy DCET11T301 SH725 Tungaloy-Wendeplatte is an ISO rhombic turning insert designed for external and internal turning applications where small tools or varying engagement conditions demand a tough, edge-stable grade SH725 coated carbide for edge stability ISO rhombic plate, 11 mm size 7° clearance angle for reliable cutting Cylindrical hole with 40°–60° countersink Optimised cutting performance for variable turning conditions The SH725 grade is a coated carbide developed for a balance of toughness and wear resistance, making it suitable for turning operations where interrupted cuts or changing engagement depths occur. As an indexable rhombic plate, the geometry provides a dependable seating in many ISO holders while the modest corner radius (0.1 mm) supports fine-detail work and reduces cutting forces. This combination helps to keep cycle times short and tool changes predictable, so production runs maintain consistent output even under fluctuating machining conditions. Secure compatibility and straightforward clamping across ISO systems Compatibility with clamping systems is determined by plate form, 7° clearance angle, tolerance class, fixation, size and thickness; the DCET11T301 follows ISO conventions to simplify selection of a matching holder or boring bar. The cylindrical hole with a 40°–60° countersink gives reliable axial and radial location in standard clamps and allows secure torque transmission with common clamp screws. For workshops standardising tooling, the ISO conformity reduces setup time and makes stock management more efficient, while clear dimensional data enables CNC programmers and toolroom staff to plan cut strategies precisely. Longer, more consistent tool life and improved surface quality The combination of the rhombic plate geometry, one-sided chipbreaker, and the coated carbide substrate is aimed at producing stable chips and a consistent cutting edge life. The plate thickness of 3.97 mm and a plate size of 11 mm provide sufficient bulk for repeated indexing while keeping the insert compact for restricted tool envelopes. Users will notice steadier surface finishes on workpieces and fewer unplanned insert changes, which contributes directly to higher overall process reliability and lower incidental downtime. Contact Metav Werkzeuge for tailored advice on selecting the correct Tungaloy turning insert and to secure fast delivery and application support Technical data Article number: 6737085 Manufacturer SKU: TUN6737085 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 0.1 mm Plate size: 11 mm Plate thickness: 3.97 mm Clearance angle: 7° Included angle / shape: 55° rhombic Special features Grade/coating: SH725 Substrate type: coated carbide Chipbreaker: one-sided Hole: with cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Plate form: rhombic ISO designation: 11T301 Typical system build: ISO plate, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The DCET11T301 SH725 insert is a coated carbide grade designed for a broad range of turning tasks; it excels where toughness and edge stability are required and is typically chosen for steels and mixed materials under variable engagement. How does the hole and countersink affect clamping? The cylindrical hole with a 40°–60° countersink ensures secure axial and radial location in standard ISO holders, improving repeatability and making clamping reliable across common tool systems. Is the corner radius suitable for fine finishing? With a corner radius of 0.1 mm, the insert supports fine-detail turning and reduced cutting forces, making it suitable for finishing passes and operations requiring tight profile control. Can this insert be used in small-tool setups? Yes, the combination of the compact 11 mm plate size, 3.97 mm thickness and the tough SH725 grade makes the insert particularly appropriate for smaller tools and variable engagement scenarios where stability is essential. What benefit does the one-sided chipbreaker provide? The one-sided chipbreaker helps to control chip formation and evacuation at typical turning feeds, contributing to consistent surface quality and longer tool life under intermittent or continuous cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant coated grade, precise geometry and dependable chip control for consistent turning performance. Order the DCET11T301 SH725 directly via Metav Werkzeuge or ask our consultants if needed. DCET 11T301 SH725 — Tungaloy indexable turning insert for turning, coated cemented carbide, 7° clearance DCET11T301 SH725 is an ISO-format indexable insert engineered for external and internal turning, offering a compact 0.1 mm nose radius and a single-sided chipbreaker for reliable chip control. Coated cemented carbide grade SH725 7° clearance for versatile turning Rhombic 55° geometry with 0.1 mm radius Cylindrical hole with 40°–60° countersink High productivity with a tough cutting grade The combination of the SH725 grade and a coated cemented carbide substrate delivers a balance of toughness and wear resistance that supports steady metal removal rates. This composition is particularly suited to smaller tool assemblies or operations with fluctuating engagement, since the material resists chipping while maintaining a stable cutting edge. The result is reduced interruptions, fewer indexings and better overall throughput for batch and serial turning tasks. Simple integration into ISO tooling systems As an ISO-format insert, compatibility is governed by the insert’s geometry, clearance angle, tolerance class, fastening method, overall size and thickness. Matching those parameters to the toolholder ensures correct seating and repeatable clamping. Using standardised dimensions simplifies inventory management and makes it straightforward to replace worn inserts without requalification of the holder, which supports predictable tool change routines and shorter machine downtime. Geometry that improves finish and process reliability The rhombic geometry with a 55° included angle and a 0.1 mm nose radius delivers a balance between profile definition and cutting-edge strength. The small radius is ideal for fine finishing and tight dimensional control on turned features, while the single-sided chipbreaker promotes controlled chip formation under variable conditions. The insert’s 3.97 mm thickness and the cylindrical hole with a 40°–60° countersink ensure secure clamping and stable performance at higher cutting parameters, contributing to consistent surface quality and repeatable component tolerances. Practical selection advice for machining success Choose the chipbreaker and grade to match the workpiece material and the rigidity of the setup: a more positive geometry aids finishing, while a tougher grade suits interrupted cuts and heavier feeds. For general turning applications, the listed grade and chipbreaker combination offers a versatile starting point; adjust cutting data and tool overhang in line with machine and fixture stability. For specific material classes or process optimisation, consult the technical data and consider a short trial to determine the ideal combination for surface finish and tool life. For consistent, high-quality turning with the SH725 grade, contact Metav Werkzeuge to specify the DCET11T301 SH725 for your tool system — technical advice and ordering are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6737083 SKU: 6737083-Tungaloy Manufacturer SKU: TUN6737083 Series: ISO indexable turning inserts Facts Included angle: 55° Clearance angle: 7° Nose radius: 0.1 mm Thickness: 3.97 mm Size: 11 mm Special features Grade/coating: SH725 Material: coated cemented carbide Shape: rhombic Chipbreaker: single-sided Hole: with cylindrical hole and one-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert intended for? The DCET11T301 SH725 insert is produced in a coated cemented carbide grade SH725 designed to perform across a broad range of materials; selection of the chipbreaker and cutting data should match the specific workpiece material. How does the 0.1 mm nose radius affect finish and strength? A 0.1 mm nose radius delivers fine surface finish and tight dimensional control, though it is less robust than larger radii; it is ideal for finishing and small-profile features when the setup is sufficiently rigid. Is this insert compatible with standard ISO toolholders? Yes — the insert follows ISO indexing and will fit holders that match the insert’s geometry, clearance angle, size and fastening arrangement, ensuring secure clamping when those parameters are met. What role does the single-sided chipbreaker play in machining? The single-sided chipbreaker promotes predictable chip formation and evacuation, reducing the risk of chip entanglement and improving process stability during both external and internal turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide durability, precise 55° geometry, and secure clamping for consistent turning results; order genuine Tungaloy indexable inserts via Metav Werkzeuge or consult our specialists for application advice. DCET 11T301 SH725 DCET Turning Insert for Turning — Tungaloy DCET11T301 SH725 is a rhombic ISO turning insert designed for external and internal turning with a tough, edge-stable coated carbide grade ISO-standard rhombic 55° form Coated carbide grade SH725 for edge stability 0.1 mm corner radius for fine finishing Cylindrical hole with countersink for secure clamping Consistent compatibility for reliable toolset integration The insert follows ISO norms so that compatibility with a holder is determined by form, relief angle, tolerance class, clamping, size and thickness. This standardised approach reduces setup time and makes it easier to replace inserts without extensive readjustment. The clear specification of the insert geometry supports predictable process planning and simplifies tool management in production environments. In practice, standardisation contributes to reduced downtime and improved process repeatability. Robust grade designed for varying engagement and small tools The SH725 grade is a coated carbide blend developed for toughness and edge stability, especially where smaller tools or fluctuating cutting conditions are encountered. A tougher grade resists chipping at interrupted cuts and tolerates minor instabilities in tool holding, which translates into fewer unscheduled tool changes and steadier surface quality. Selecting a grade like SH725 is a rational choice for mixed-series production where reliability and extended tool life are priorities. Geometry that balances strength and surface quality The rhombic insert geometry with a 55° lead angle and 0.1 mm corner radius is optimised to provide a balance between cutting-edge strength and the ability to achieve fine surface finishes. The single-sided chipbreaker design promotes controlled chip formation; choosing the appropriate breaker for the workpiece material and cutting mode is essential to maintain thermal stability and avoid built-up edge. The insert thickness of 3.97 mm and the central hole with a cylindrical bore plus one-sided countersink ensure secure clamping and axial stability during operation. Practical system considerations and selection guidance As part of a complete turning system — insert, corresponding external holder or boring bar, shim/underplate, clamping set and replacement screws — this indexable part is intended for straightforward integration. For external and internal turning, match the chipbreaker and grade to the workpiece, machining strategy and fixture rigidity to obtain the best economy-per-cut. If there is any uncertainty when specifying the insert or holder, technical advice is available to support material-appropriate choices and machining parameter recommendations. For tailored advice on using Tungaloy SH725 inserts or to secure genuine components through Metav Werkzeuge, please contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our team will assist with selection and delivery. Technical data Article number: 6737081 Manufacturer SKU: TUN6737081 SKU: 6737081-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade: SH725 (coated carbide) Core measurements Size: 11 mm Thickness: 3.97 mm Relief angle: 7° Lead angle: 55° Corner radius: 0.1 mm Design and features Rhombic plate form With hole: cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker Application: turning Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What holder features are required for this insert? The DCET11T301 SH725 Tungaloy turning insert requires a holder matching the rhombic form, 7° relief angle, correct tolerance class and the 11 mm plate size for secure clamping. Is this insert suitable for finishing operations? Yes — with a 0.1 mm corner radius and the SH725 grade, the insert supports fine finishing where a small radius and good edge stability are required. Which materials is the SH725 grade intended for? The SH725 coated carbide grade is specified for turning tasks where toughness and edge stability are needed; select the chipbreaker and cutting data according to the workpiece material and process requirements. How is secure clamping achieved with this insert? Secure clamping is provided by the central cylindrical hole and the one-sided countersink (40°–60°), together with a matching clamp, shim and screw in the recommended holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, precise 0.1 mm nose radius, and a robust single‑side chipbreaker for consistent machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. DCET11T301 SH725 DCET indexable turning insert for turning — Tungaloy The DCET11T301 is an ISO‑standard indexable turning insert designed for external and internal turning operations, offering a tough, edge‑stable grade for variable engagement conditions. ISO rhombic insert, 55° included angle Coated carbide grade SH725 for edge stability Single‑side chipbreaker for controlled chips 0.1 mm nose radius; thickness 3.97 mm Stable cutting performance where engagement varies The DCET11T301 insert, supplied in coated carbide SH725, is engineered to deliver reliable edge life in changing cut conditions. The SH725 grade combines toughness with edge stability, making it especially suitable for smaller toolholders and interrupted or variable engagements. The result is fewer insert changes, reduced downtime and a more predictable production rhythm. The single‑side chipbreaker supports consistent chip formation, reducing the risk of built‑up edge and improving surface finish during turning. Geometry and holder compatibility that reduce setup risk A rhombic shape with a 55° included angle and a 7° relief angle yields a geometry that is compatible with a wide range of ISO holders when form, relief angle, tolerance class, fastening, size and thickness are matched. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure mounting and repeatable positioning. By aligning insert geometry to the holder specifications, fixture reliability increases and unexpected vibration or misalignment is minimised, supporting better tool life and part accuracy. Precision finish and process benefits on the shop floor With a 0.1 mm nose radius and a thickness of 3.97 mm, the insert enables fine contouring and stable cutting forces for improved surface quality. The compact 11 size allows integration into slim holders where space is limited, while the coated carbide substrate provides thermal stability at elevated cutting speeds. These technical attributes translate into practical advantages: reduced scrap rates, fewer rework cycles and a smoother transition between batches when machining steels and similar materials in turning operations. Grade and coating explained for practical selection The SH725 coating and substrate combination is selected for its capacity to withstand varying cutting conditions without premature edge breakdown. For operators or planners less familiar with grade designations: coated carbide means a hard substrate with a protective and performance‑enhancing top layer that improves wear resistance and helps maintain cutting edge integrity. When choosing inserts for particular workpieces, pair this grade with a chipbreaker and holder suited to the workpiece material and the intended depth of cut to achieve the best balance between productivity and tool life. For reliable turning performance with Tungaloy's SH725 grade, contact Metav Werkzeuge for tailored application advice and rapid dispatch — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737082 SKU: 6737082-Tungaloy Manufacturer item no: TUN6737082 Brand: Tungaloy Model series: ISO turning indexable inserts Material: Coated carbide Grade/coating: SH725 Core specifications Inscribed size: 11 Thickness: 3.97 mm Nose radius: 0.1 mm Included angle: 55° Relief angle: 7° Hole style: cylindrical hole + one‑side countersink (40°–60°) Special features Rhombic plate form Single‑side chipbreaker ISO‑standard geometry for holder compatibility Suitable for external and internal turning Designed for variable engagement and small holders FAQ What materials is this insert suitable for? The DCET11T301 SH725 Tungaloy turning insert is specified as a coated carbide grade suitable for a broad range of steels and similar materials when the correct chipbreaker and cutting data are applied. Is the SH725 grade good for interrupted cuts? Yes, the SH725 grade is designed to be tough and edge‑stable, making it appropriate for interrupted cuts and varying engagement conditions in turning operations. How does the chipbreaker affect machining? The single‑side chipbreaker on this insert promotes controlled chip formation and evacuation, which can enhance surface finish and reduce the risk of built‑up edge during turning. Which holder features must be checked for compatibility? Compatibility depends on insert shape, 7° relief angle, tolerance class, fastening method, size and thickness; matching these parameters to the holder ensures secure seating and repeatable results. Can the insert be used for internal turning? Yes, the geometry and size of the insert permit use in internal turning applications, provided a suitable boring bar or holder is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Benefit from the DCET11T301’s combination of coated carbide SH730 toughness and a precise 0.1 mm corner radius for steady, repeatable turning results; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCET 11T301 SH730 indexable turning insert (Turning) — Tungaloy A DCET11T301 SH730 indexable turning insert designed for ISO‑compatible external and internal turning, offering stable edge performance for varying engagement conditions. ISO rhombic insert 11 mm Coated carbide grade SH730 0.1 mm corner radius Cylindrical hole + one‑side countersink Durable grade for reliable metal removal The insert is manufactured from coated carbide in the SH730 grade, a tough, wear‑resistant cutting material intended for turning where edge stability matters. This composition helps maintain a steady cutting edge under transient loads and small tool overhangs, reducing edge chipping and extending tool life. The single‑sided chipbreaker assists in controlled chip formation, improving surface finish and minimising the need for secondary operations. Precise geometry for consistent clamping and fit Compatibility with a toolholder depends on form, clearance angle, tolerance class, fixing method, size and thickness; the design of this ISO insert reflects those requirements. With an included angle of 55°, a clearance angle of 7° and a plate thickness of 3.97 mm, the geometry ensures secure seating in standard ISO holders and predictable cutting engagement. The cylindrical hole with a one‑side countersink (40°–60°) provides positive clamping and alignment for repeatable set‑ups. Small radius, big effect on finish and precision A 0.1 mm corner radius gives a balance between edge strength and the ability to produce fine surface finishes on both external and internal profiles. The 11 mm plate size and compact form suit smaller tool assemblies and changeable cutting conditions, where keeping stability and repeatability is essential. For shops aiming to maintain cycle times while improving first‑pass quality, this insert supports both productivity and process reliability. Practical advantages for workshop integration As an ISO‑standardised rhombic insert, it simplifies inventory and tooling choices while the SH730 coating supports applications across a range of steels and common turning tasks. The configuration — including the hole style and chipbreaker — reduces set‑up variability and aids rapid index changes. Where process consistency and part quality are priorities, this insert contributes to lower rework rates and predictable tool performance. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DCET11T301 SH730 indexable insert or to check current availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856621 Manufacturer SKU: TUN6856621 SKU: 6856621-Tungaloy Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Included angle: 55° Special features Material: carbide (coated) Grade/coating: SH730 Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Series: ISO indexable turning inserts Application: turning FAQ What materials is this insert suited for? The DCET11T301 SH730 Tungaloy indexable insert is optimised for general turning tasks and performs well on a broad range of steels and standard workshop materials where a tough, edge‑stable grade is advantageous. How does the SH730 grade affect performance? SH730 provides a balance of toughness and wear resistance; the SH730 coated carbide helps maintain cutting edge stability during intermittent cuts and variable engagement typical in small‑tool setups. Which toolholders are compatible with this insert? Compatibility is determined by insert form, 7° clearance, tolerance class, fixing method, size (11 mm) and thickness (3.97 mm); use ISO‑compatible holders that accept rhombic DCET‑style inserts. Can the insert be clamped securely? Yes. The DCET11T301 features a cylindrical hole with a one‑side countersink (40°–60°) to ensure positive clamping and repeatable indexing in standard clamping systems. Is the corner radius suitable for finishing work? The 0.1 mm corner radius is designed to balance edge strength and surface finish, making it suitable for operations requiring improved part finish without sacrificing durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of SH730 coated carbide toughness, ISO compatibility and a precise 0.1 mm corner radius for consistent turning performance; order through Metav Werkzeuge or request application advice from our consultants. DCET 11T301 SH730 turning insert by Tungaloy — rhombic, 55° cutting angle The DCET11T301 is an ISO‑standard rhombic indexable insert for turning, designed to deliver stable chip formation and reliable edge life in variable engagement conditions. SH730 coated carbide grade Rhombic shape with 55° cutting angle 0.1 mm corner radius for fine finishes Single‑sided chipbreaker with central hole Proven cutting performance for variable turning conditions The coated SH730 grade combines edge stability with controlled toughness, making the insert suitable for changing engagement depths and smaller tooling systems. The coated carbide substrate offers resistance to flank wear while maintaining a predictable wear pattern; this leads to longer intervals between indexings and reduced tool change downtime. The result is improved process stability and a measurable effect on productivity in mixed‑batch or short‑run environments. ISO compatibility and secure clamping for reliable setups As an ISO‑conforming indexable insert, the geometry and size ensure straightforward compatibility with standard DCET holders where form, clearance, tolerance class, fastening method, size and thickness match. The cylindrical hole with single‑side countersink (40°–60°) allows secure mounting and repeatable clamping, reducing vibration and improving repeatability. Consistent seating and the standardised interface simplify inventory management and reduce setup uncertainty. Geometry that supports surface quality and chip control The combination of a 55° cutting angle, rhombic profile and 0.1 mm corner radius produces a balance between cut aggressiveness and surface finish. The single‑sided chipbreaker is tuned for efficient chip control in a range of feeds and depths; selecting the appropriate chipbreaker and grade for the workpiece material directly influences finish and cycle times. For applications where a fine external finish is required, the small corner radius helps achieve the target without sacrificing edge life. Application scope and economic advantages in production Designed for external and internal turning operations, this insert brings predictable performance across varying process conditions. The tough SH730 grade supports stable chip formation and reduces the risk of premature chipping in interrupted cuts, translating into lower tooling costs per component. For workshops seeking dependable repeatability with compact toolholders, the indexable design aids fast replacement and minimal machine downtime, supporting leaner production flows. Contact Metav Werkzeuge for tailored advice on Tungaloy DCET inserts, stock availability and application recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6856620 SKU: 6856620-Tungaloy Manufacturer SKU: TUN6856620 Model designation: DCET11T301 Series: ISO turning indexable inserts Application: Turning Grade: SH730 Core dimensions Cutting angle: 55° Clearance angle: 7° Corner radius: 0.1 mm Thickness: 3.97 mm Size (inscribed circle): 11 mm Design & features Shape: Rhombic Hole: with hole — cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: single‑sided Material: carbide Coating/grade: SH730 ISO‑standard insert for external and internal turning FAQ What work does this insert suit best? The DCET11T301 SH730 Tungaloy insert is designed primarily for external and internal turning, offering stable chip formation and good edge life in variable engagement conditions. Is the insert compatible with standard DCET holders? Yes, the ISO designation and geometry ensure compatibility with DCET‑type holders when form, clearance, tolerance, fastening, size and thickness match. How does the SH730 grade affect tool life? The SH730 coated carbide grade provides toughness and edge stability, reducing the likelihood of chipping and often extending productive cutting life under variable conditions. What does the hole and countersink provide? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure, repeatable clamping and reduced vibration for more consistent machining results. Which chipbreaker should be selected for different materials? Chipbreaker selection depends on the workpiece material and cutting parameters; the single‑sided breaker on this insert supports controlled chips across a range of feeds and depths, but matching breaker geometry to material yields best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Take advantage of the SH730 coated carbide grade together with a 0.1 mm corner radius and 55° geometry for more stable cutting and finer surface finishes; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DCET 11T301 SH730 DCET turning insert by Tungaloy — coated carbide, 55° geometry DCET11T301 SH730 is a rhombic ISO turning insert designed for external and internal turning applications, offering a robust coated carbide grade for variable engagement and smaller-tool setups. Rhombic ISO insert, 55° lead angle SH730 coated carbide for tough conditions 0.1 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Engineered for consistent, productive turning The DCET11T301 SH730 insert combines a coated carbide substrate with a grade formulated for stable cutting edge behaviour, making it suited to turning where engagement and cutting depth vary. The 55° lead angle supports versatile approach angles while the 7° clearance reduces rubbing on the flank, improving tool life and process stability. Specified tolerances and the ISO geometry ensure predictable seating in compatible holders, so productivity and reproducibility are prioritised for batch and single-part production alike. Achieve precise finishes with controlled edge geometry A 0.1 mm corner radius delivers a balance between a sharp edge for finer surface quality and sufficient edge strength to avoid premature chipping. With a 3.97 mm thickness and an ISO rhombic form, the plate resists bending and is compatible with a wide range of standard external holders and boring bars. The single-sided chipbreaker is optimised for controlled chip flow in common turning operations, which helps maintain surface integrity and reduces downtime for chip management. Compatibility and predictable performance across conditions Compatibility with a holder is determined by form, clearance, tolerance class, fastening, size and thickness, so the insert is intended for straightforward integration into standard tool systems when those parameters match. The SH730 grade is tailored for situations where cutting conditions change or where smaller tooling is used, offering reliable performance and consistent results over repeated cycles. Selecting the appropriate chipbreaker and grade for the workpiece material will maximise tool life and process economy. For application guidance on the Tungaloy SH730 grade or to procure genuine DCET11T301 SH730 inserts through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options Technical data Article number: 6856653 SKU: 6856653-Tungaloy Manufacturer SKU: TUN6856653 Name: DCET11T301 SH730 Tungaloy turning insert Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.1 mm Lead angle: 55° Clearance angle: 7° Hole: cylindrical hole + one-side countersink (40°–60°) Special features Coating / grade: SH730 Material: carbide Plate form: rhombic Chipbreaker: one-sided Application: turning (external and internal) ISO series: ISO turning inserts Compatibility: depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCET11T301 SH730 insert is a coated carbide grade designed for variable cutting conditions; material suitability depends on the chosen chipbreaker and cutting data, and the SH730 grade is generally used where edge stability under changing engagement is required. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius on the DCET11T301 promotes improved surface quality while maintaining a robust edge, balancing finish and tool life in finishing and light-roughing passes. Can the insert be used in both external and internal turning? Yes, the rhombic ISO form and 55° geometry make the insert adaptable for both external and internal turning when a compatible holder and correct mounting are used. What should be checked for holder compatibility? Holder compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; verifying these dimensions ensures correct seating and secure clamping. Is the SH730 grade suitable for small tools and fluctuating engagement? The SH730 grade is specifically formulated for stable cutting-edge behaviour in applications with smaller tools or variable engagement, offering consistent performance under such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated cemented carbide SH730 for stable cutting performance, a 0.1 mm corner radius for fine finishing and the ISO‑standard rhombic form for broad holder compatibility; order the DCET11T301 directly via Metav Werkzeuge or consult the technical team for application advice. DCET 11T301 SH730 — Indexable insert for turning by Tungaloy The DCET11T301 SH730 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a tough, edge‑stable grade for variable engagement conditions. ISO‑standard rhombic insert for turning Coated cemented carbide grade SH730 0.1 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Precision performance for consistent turning results The ISO‑standard rhombic insert delivers repeatable geometry and predictable wear behaviour. Manufactured from coated cemented carbide, the SH730 grade is formulated for edge stability under fluctuating cut conditions, which benefits short tools and operations with variable engagement. As a result, process reliability is increased and the need for unscheduled tool changes is reduced, supporting smoother production cycles and more consistent component quality. Geometry and mounting that reduce setup complexity A compact 11 mm rhombic format combined with a 0.1 mm radius, 7° relief and an included angle of 55° facilitates both finishing and light profiling. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to suit common clamping systems; compatibility with a chosen holder is governed by form, relief angle, tolerance class, fastening method, size and thickness. This standardised interface streamlines tool selection and reduces inventory complexity on the shop floor. Chip control and application scope for reliable machining The single‑sided chipbreaker is optimised for turning tasks, promoting controlled chip formation and evacuation in typical external and internal operations. The combination of chip control geometry and the SH730 grade supports machining where engagement depth changes or interrupted cuts occur, maintaining surface quality and reducing risk of edge chipping. For finishing passes the small corner radius supports fine surface results while maintaining tool life. Economic operation and straightforward system integration The insert forms part of a simple system consisting of the indexable plate, matching external holder or boring bar, shim/clamping set and replacement screws, which eases maintenance and spare‑parts management. The tough carbide grade and stable chip formation lower the frequency of replacements and contribute to improved uptime. Where tool life and predictable tool‑change intervals are priorities, the insert offers a balance between performance and operational economy. Contact Metav Werkzeuge for tailored application recommendations or to request the DCET11T301 SH730 insert from Tungaloy; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856655 Manufacturer SKU: TUN6856655 SKU: 6856655-Tungaloy Label: DCET11T301 SH730 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 55° Hole/countersink: with hole — cylindrical hole + one‑sided countersink (40°–60°) Designs / Special features Shape: rhombic Material: cemented carbide Grade/coating: SH730 (coated) Chipbreaker: one‑sided Mounting: ISO‑standardised interface; compatibility determined by form, relief, tolerance, fastening, size and thickness Typical application: external and internal turning; choose chipbreaker and grade according to workpiece material and cutting conditions FAQ What turning operations suit this insert best? The DCET11T301 SH730 insert is suited to external and internal turning operations where variable engagement occurs and a tough, edge‑stable grade is required. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO‑standard geometry; compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness to the chosen holder. What does the SH730 grade offer for tool life? SH730 is a tough, coated cemented carbide grade designed for edge stability and stable chip formation, which supports longer effective tool life in changing cut conditions. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm radius supports fine finishing passes by reducing edge stress while maintaining a precise profile and surface quality. Does the insert require a specific clamping screw or shim? The insert is intended for ISO‑compatible clamping systems; the system generally comprises the indexable plate, a matching external holder or boring bar, an underlay/clamping set and replacement screws as appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide durability, precise 55° rhombic geometry, and a compact corner radius of 0.1 mm for stable turning across changing engagement conditions; order genuine Tungaloy inserts via Metav Werkzeuge or consult our specialists for process-matched selection. DCET 11T301 SH730 – DCET turning indexable insert, 55° rhombic, Tungaloy DCET 11T301 SH730 is an ISO-standard indexable turning insert intended for external and internal turning applications with a focus on edge stability for small tools and variable cutting conditions Coated carbide grade SH730 for edge stability ISO 55° rhombic geometry for wide holder fit Single-sided chipbreaker for varied cutting conditions Reliable edge performance for varied turning tasks The DCET11T301 insert combines a coated carbide substrate with the SH730 grade to deliver consistent edge stability even when engagement conditions change. The applied coating and substrate chemistry are selected to resist cratering and wear, which translates into longer effective tool life and fewer unscheduled indexings. For operations where small-tool rigidity and repeatable chip formation matter, this insert reduces the frequency of tool changes and helps maintain cycle-time consistency, supporting improved production efficiency and predictable part quality. Interchangeability that speeds up tooling setups Designed to ISO dimensions, the insert’s 55° geometry and standardised form ensure compatibility across a broad range of holders when matched by form, clearance, tolerance class, fixing method, size and thickness. The 3.97 mm thickness and 11 mm nominal size make the insert straightforward to fit into common external holders and boring bars, while the 7° clearance angle supports secure seating and reduced rubbing. This interchangeability reduces setup complexity and shortens downtime during tool replacement, enabling more reliable machine utilisation and faster changeovers. Predictable chip control and stable cutting behaviour The single-sided chipbreaker is optimised for stable chip formation under a variety of feeds and depths of cut. Combined with the insert’s rhombic form and the central cylindrical hole with a single-sided countersink (40°–60°), clamping is positive and repeatable, which contributes to consistent cutting forces and improved surface quality. Better chip control lowers the risk of entanglement or irregular evacuation, supporting safer operation and easier downstream handling. These technical choices aid both finishing passes and medium-accuracy production where repeatability matters. Practical selection and mounting advice for consistent results When specifying this insert, match the plate to a holder that accepts the rhombic 55° form and accounts for the corner radius 0.1 mm for the desired edge engagement — small radii favour finishing and tight-tolerance profiling. Ensure the insert seat is clean and that clamping hardware (including any underlay or clamp set) meets the tolerance class required for secure fastening. The SH730 grade is intended for robust edge life with changing conditions, so selecting an appropriate feed and cutting speed will preserve the cutting edge and reduce vibration. If required, Metav Werkzeuge’s technical team can provide application guidance to integrate the insert into a specific machining process and recommend clamping hardware and torque settings. Contact Metav Werkzeuge for application advice and to order genuine Tungaloy DCET turning inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6856623 Manufacturer SKU: TUN6856623 SKU: 6856623-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DCET11T301 SH730 Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Included angle: 55° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Special features Coated carbide grade SH730 Rhombic insert form Single-sided chipbreaker ISO-ground for holder compatibility Suitable for external and internal turning FAQ What corner radius does this insert have and what is it best used for? The DCET11T301 insert features a corner radius of 0.1 mm, which is suited to finishing operations and fine profile work where small radii and a sharp cutting edge support tighter tolerances and improved surface finish. How does the insert fit into common toolholders? Compatibility depends on form, clearance, tolerance class, fixing method, size and thickness; the ISO 55° rhombic form and 3.97 mm thickness of the DCET 11T301 make it suitable for many ISO-compatible turning holders when the holder accepts the DCET geometry (SKU: TUN6856623) and the correct clamping arrangement is used. Which cutting conditions are ideal for the SH730 grade? The SH730 grade is a tough, edge-stable coated carbide designed for turning where variable engagement or smaller toolholders are present; it offers a balance of wear resistance and toughness for repeatable machining under fluctuating loads. What clamping arrangement is required for secure seating? The insert uses a central cylindrical hole with a single-sided countersink (40°–60°); this arrangement provides a positive location for the clamping screw and helps ensure repeatable seating and stable cutting when matched with the correct clamp set and replacement screws. Is this an indexable insert and can it be rotated to a fresh edge? The DCET 11T301 is an indexable turning insert designed for rotation or replacement according to its rhombic geometry and single-sided chipbreaker; consult the insert orientation and holder compatibility to determine the number of usable cutting positions for a given setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Take advantage of the SH730 coated carbide grade and compact 11 mm rhombic geometry to achieve stable cutting edges and dependable tool life; compatibility with ISO holders ensures straightforward tool changes and consistent production results. Order supply or request advice from Metav Werkzeuge for application matching. DCET11T301 SH730 DCET 11T301 indexable turning insert — Tungaloy The DCET11T301 SH730 is an ISO-format rhombic indexable insert designed for general turning operations, providing a tough, edge-stable grade for variable engagement conditions. ISO-formatted rhombic insert, 11 mm size SH730 coated carbide for stable cutting edges 7° relief angle with 0.1 mm corner radius Cylindrical hole with single-side countersink Consistent chip control for dependable turning performance The selected grade, SH730, is a coated carbide variant optimised for toughness and edge stability, especially useful when using smaller tools or when engagement conditions change frequently. This resilience translates into fewer edge failures and a steadier surface finish over serial runs, which in turn supports predictable cycle times. The single cutting-edge arrangement reduces the variables in edge wear, allowing modular tooling systems to maintain repeatable results without frequent unplanned interventions. Precision geometry that supports repeatable machining Manufactured to ISO format, the insert’s rhombic shape and defined geometry deliver repeatable seating and orientation in suitable holders. The combination of a 7° relief angle and a 0.1 mm corner radius provides a balance between strength at the cutting edge and the ability to achieve fine surface finishes. The insert thickness of 3.97 mm and its secure hole arrangement ensure a stable clamping contact, which minimises micro‑movement under load and helps to maintain dimensional accuracy across batches. Designed to streamline workshop workflows As part of an ISO-based system, this indexable insert integrates with compatible external holders or boring bars along with the required shim/clamp sets and replacement screws, enabling fast in‑machine exchange and simple inventory management. The geometry and chip‑control features contribute to reduced downtime, since predictable wear behaviour allows planned tool change intervals and fewer emergency stoppages. For both external and internal turning tasks the insert supports efficient toolset planning and shorter setup times. Application guidance and practical benefits in use The single-sided chip control and coated carbide construction make the insert a robust choice for a variety of turning tasks where stability and edge retention are priorities. Selecting the appropriate chipbreaker and grade for the specific workpiece material, machining method and machine/tooling stability will maximise tool life and surface quality. Compatibility to a specific holder is determined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness, so matching these parameters is essential for reliable performance. Contact Metav Werkzeuge for application advice on Tungaloy turning inserts and to arrange supply; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Manufacturer item number: 6856750 Manufacturer SKU: TUN6856750 Market SKU: 6856750-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 55° Special features Coated carbide Grade SH730 Rhombic insert shape With hole Hole style: cylindrical hole + one-side countersink (40°–60°) Single-sided chipbreaker Intended application: turning System composition: ISO insert, suitable external holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What turning tasks is the DCET11T301 SH730 best suited for? The DCET11T301 SH730 indexable insert from Tungaloy is designed for general external and internal turning where a tough, edge-stable grade is required, particularly for smaller tools or variable engagement conditions. How is the insert fixed and what is the hole design? The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure secure clamping in compatible ISO holders and stable seating under cutting forces. What advantages does the SH730 grade offer in practice? SH730 delivers a balance of toughness and edge stability: the coating increases wear resistance while the base carbide supports a durable cutting edge, reducing the frequency of unplanned edge failures and helping to maintain consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T301 SH730 Wendeplatten - Tungaloy
Benefit from the combination of a coated carbide SH730 grade and a 55° rhombic geometry for reliable external and internal turning; this results in stable chip formation and extended edge life. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DCET11T301 SH730 Tungaloy indexable turning insert for turning, 55° rhombic, 0.1 mm radius A DCET11T301 SH730 indexable turning insert engineered for ISO-compliant turning operations, suited to both external and internal machining where small-tool stability and reliable edge behaviour are required. Coated carbide grade SH730 for stable cutting Rhombic insert, 55° included angle 0.1 mm corner radius for fine finishing Cylindrical hole with single-side countersink 40°–60° Consistent cutting performance and longer tool life The combination of SH730 and a coated carbide substrate delivers a stable cutting edge designed to resist chipping under variable engagement conditions. This grade has been developed for applications where smaller tool dimensions or fluctuating cutting depths occur; the coating promotes improved chip control and increased wear resistance, which in practice reduces unexpected tool changeovers. The result is a more predictable process and less downtime in serial production. Clear guidance on holder compatibility and mounting As an ISO turning insert, compatibility with the toolholder is determined by a number of geometric and clamping attributes: 55° included angle, 7° relief angle, seat tolerance class, clamping method, size 11 mm and thickness 3.97 mm. The insert features a cylindrical hole with a single-side countersink (40°–60°), which ensures secure fastenÂing in compatible carriers. Selecting a holder that matches these parameters ensures correct seating, repeatable positioning and consistent cutting performance. Application focus: where this insert brings the greatest benefit This indexable insert is primarily intended for turning tasks that demand a fine finish and predictable edge life. The 0.1 mm corner radius supports improved surface quality on light-to-moderate cuts, while the one-sided chipbreaker assists controlled chip formation in common steels and alloyed materials. In practice, choosing this insert reduces rework and stabilises cycle times when paired with an appropriately rigid setup. For variable engagement or interrupted cuts, the combination of geometry and grade helps maintain productivity. Contact Metav Werkzeuge for tailored machining parameters, availability of genuine Tungaloy DCET11T301 inserts and specific application advice Technical Data Article number: 6856749 SKU: 6856749-Tungaloy Manufacturer SKU: TUN6856749 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Included angle: 55° Relief angle: 7° Special features Shape: rhombic Hole: with hole; cylindrical hole + single-side countersink 40°–60° Grade/coating: SH730, coated carbide Chipbreaker: one-sided Application: Turning Compatibility note: ISO turning insert; compatibility determined by shape, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The SH730 grade and coated carbide substrate are suited to machining a broad range of steels and alloyed materials; the DCET11T301 insert performs well where stable cutting edges and controlled chip formation are required. Can the insert be used for internal and external turning? Yes, the insert is designed for both external and internal turning; ensure the chosen holder matches the insert's 55° geometry, 7° relief angle and thickness 3.97 mm for correct seating. What surface finish can be expected with the 0.1 mm radius? A 0.1 mm corner radius supports improved surface quality on finishing passes and is recommended where fine finishing and dimensional consistency are priorities. How does the single-sided chipbreaker affect performance? The one-sided chipbreaker promotes repeatable chip control in typical turning operations, reducing the likelihood of long, entangling chips and improving process reliability. Which clamping features must the holder provide for secure fastening? The holder must accommodate an ISO rhombic insert with a cylindrical hole and a single-side countersink (40°–60°), and provide a secure clamp to ensure repeatable positioning and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide grade SH725, precise 55° rhombic geometry and a 0.2 mm corner radius to secure stable cutting and long tool life in turning operations. The insert’s central hole with a single-sided countersink and a plate thickness of 3.97 mm supports reliable clamping and repeatable seating. Order the DCET11T302 SH725 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCET11T302 SH725 DCET turning indexable insert by Tungaloy — rhombic 55° (ISO 11T302) The DCET11T302 SH725 is an ISO-standard rhombic turning insert designed for external and internal turning where stable chip control and edge security are required, particularly on smaller tools or varying engagement conditions. Coated carbide grade SH725 55° rhombic geometry 0.2 mm corner radius Central hole with countersink Consistent cutting through optimised geometry The rhombic 55° configuration provides a balanced cutting angle that reduces axial forces and promotes smooth feed behaviour during both light and medium cutting. A 0.2 mm corner radius helps distribute cutting loads at the insert corner, reducing local edge stress and supporting a longer service life under interrupted cuts. Where finish and dimensional consistency matter, this geometry contributes to steadier tool deflection and predictable chip flow, translating into fewer rework cycles and improved process reliability. Durable performance from coated carbide SH725 The coated carbide SH725 grade used for this insert combines toughness with a cutting-edge coating system to withstand variable engagement and small-tool dynamics. The coating enhances wear resistance and thermal stability while the substrate provides fracture toughness; together they help maintain a stable cutting edge on short overhangs and during fluctuating depth of cut. For practical terms, this means more consistent surface quality and extended edge life when switching between materials or when encountering variable workpiece conditions. Secure seating and system compatibility for reliable production Designed to the ISO 11T302 specification, the insert features a central cylindrical hole with a single-sided countersink (40°–60°) that ensures secure clamping in standard ISO-compatible holders. The plate thickness of 3.97 mm and size 11 format facilitate interchangeability in many turning tool assemblies; compatibility with the correct holder is determined by shape, relief angle, tolerance class, fixing method, size and thickness. When integrating into an insert system, select the matching chipbreaker and grade according to workpiece material and intended finish to achieve optimum chip control and repeatability. Practical advantages for workshop and production environments This indexable insert supports both external and internal turning tasks and is particularly suitable where tool stability or variable engagement conditions are common. The single-sided chipbreaker geometry simplifies selection for straightforward operations while the combination of grade and geometry reduces the need for frequent edge changes. For production floors aiming for predictable tool life and reduced downtime, the insert’s stability and compatibility with ISO holders make it a pragmatic component in modular turning tool systems. Contact Metav Werkzeuge today to specify the DCET11T302 SH725 Tungaloy indexable inserts for improved process reliability; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability. Technical Data Article number: 6737056 Manufacturer SKU: TUN6737056 Stock SKU: 6737056-Tungaloy Name: DCET11T302 SH725 Tungaloy indexable insert Material: carbide Facts Insert size: 11 Angle: 55° Corner radius: 0.2 mm Relief angle: 7° Thickness: 3.97 mm Special features Coating/grade: SH725 Shape: rhombic Chipbreaker: one-sided ISO designation: 11T302 Hole: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning System components: ISO insert, matching outer holder or boring bar, shim/clamping set and replacement screw FAQ What materials is this insert suitable for? The DCET11T302 SH725 insert with coated carbide grade SH725 is formulated for a broad material spectrum; select the appropriate chipbreaker and cutting data based on the specific workpiece material to achieve best results. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a compromise between edge strength and surface finish, improving corner life under intermittent cuts while still enabling acceptable part finish for many turning operations. Is the DCET11T302 compatible with standard ISO holders? Yes, the insert follows the ISO 11T302 form and is compatible with ISO-standard turning holders provided the holder matches the insert’s shape, relief angle, tolerance class, fixation method, size and thickness. What does the single-sided countersunk hole provide? The central cylindrical hole with a single-sided countersink (40°–60°) ensures stable seating and secure clamping, which helps to maintain accurate positioning and repeatable assembly in the toolholder. Which applications benefit most from this insert? The insert is well suited to production environments that require stable chip control and consistent edge performance in both external and internal turning, especially where small tools or variable engagement conditions are encountered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of robust SH725-grade coating, 55° rhombic geometry, and a secure clamping interface for consistent turning performance; order the DCET11T302 SH725 insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. DCET 11T302 SH725 indexable turning insert by Tungaloy — ISO 55° rhombic for external and internal turning A DCET11T302 SH725 indexable insert engineered for ISO-standard turning applications, offering a 55° rhombic geometry and a tough, coated carbide grade for variable engagement conditions SH725 coated carbide grade 55° rhombic geometry 0.2 mm nose radius Cylindrical hole with 40°–60° countersink Consistent cutting under varying engagement for reliable productivity The SH725 grade is a coated carbide formulation optimised for toughness and a stable cutting edge, making it particularly suitable where cutting conditions change or smaller tools are used. This behaviour reduces the frequency of edge failures and supports longer run times, which translates into fewer interruptions on the shop floor. Coatings on cemented carbide inserts enhance wear resistance and reduce built-up edge; in practice, this means more predictable tool life and improved process stability when performing external and internal turning. Secure clamping and ISO compatibility for repeatable results ISO standardisation ensures the insert fits compatible holders when form, clearance angle, tolerance class, fastening, size and thickness are matched. The 55° rhombic geometry delivers flexible approach angles for both finishing and light roughing, while the cylindrical hole with one-sided countersink (40°–60°) provides a reliable clamping seat and repeatable positioning. The outcome is improved dimensional repeatability and less time spent adjusting tool setups, which supports faster changeovers and consistent part quality across production runs. Controlled chip formation and surface finish with minimal tool wear The single-sided chipbreaker is designed to promote predictable chip evacuation under typical turning feeds; combined with the 0.2 mm nose radius, this results in superior surface finish when light passes are are required and helps to limit cutting forces. The 3.97 mm plate thickness and 11 mm size provide sufficient support for the cutting edge, reducing vibration and contributing to reliable edge life. For machinists seeking a balance between form stability and fine finishing capability, this insert provides confidence in both everyday and variable operations. Contact Metav Werkzeuge for tailored tooling advice and fast availability of Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6733211 Manufacturer SKU: TUN6733211 Label: DCET11T302 SH725 Tungaloy-insert Model series: ISO turning indexable inserts Facts Insert designation: DCET11T302 Insert size: 11 Plate thickness: 3.97 mm Nose radius: 0.2 mm Included angle: 55° Relief angle: 7° Grade: SH725 Material: Cemented carbide (coated) Design & features Plate shape: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What materials is this insert suitable for? The DCET11T302 SH725 insert is a coated cemented carbide grade designed for a broad range of turning tasks; the SH725 formulation emphasises toughness and edge stability for mixed or variable engagement conditions. Can the insert be used for both external and internal turning? Yes, the 55° rhombic geometry and standard ISO form make this indexable insert suitable for both external and internal turning operations when paired with compatible holders. How does the 0.2 mm nose radius affect the finish? A 0.2 mm nose radius on the DCET11T302 insert helps achieve finer surface finishes at modest feeds while maintaining low cutting forces, which is advantageous for finishing passes and small-diameter work. What clamping considerations are important for secure use? Secure and repeatable clamping is achieved with the cylindrical hole and one-sided countersink; compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness to the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of an SH725 coated carbide grade, a precise 55° rhombic geometry and a compact 0.2 mm corner radius to ensure stable cutting-edge performance and consistent chip control in demanding turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. DCET 11T302 SH725 DCET turning insert – Tungaloy, rhombic 55° The DCET11T302 SH725 is an ISO-standard indexable turning insert for external and internal turning, offering a robust, edge-stable solution for variable engagement conditions. ISO rhombic insert, 55° cutting angle Coated carbide grade SH725 for stable edges Cylindrical hole with countersink (40°–60°) Single-sided chipbreaker for consistent chips Maximise throughput with an edge‑stable coated carbide The combination of the SH725 coating and carbide substrate provides a balance of toughness and wear resistance that reduces flank wear and extends tool life under interrupted cuts. Designed with a single-sided chipbreaker, the insert promotes consistent chip control which reduces secondary machining or manual chip handling. These technical characteristics translate directly into fewer tool changes and higher net machine productivity during both uncomplicated and variable turning tasks. Precise geometry for repeatable clamping and accuracy The rhombic shape with a 55° cutting angle and a 0.2 mm corner radius enables fine control of cutting engagement and surface finish while maintaining robust edge strength. The 7° clearance angle and a plate thickness of 3.97 mm ensure secure seating in standard ISO holders, while the cylindrical hole with a countersink (40°–60°) supports stable clamping with common fastening systems. These geometrical details reduce vibration and contribute to repeatable part quality in serial production. Versatile grade SH725 for mixed and unstable conditions The material specification—coated carbide SH725—is formulated for applications where edge stability under varying cutting conditions is crucial, such as short overhang setups or changing depths of cut. As a tougher carbide grade, it performs well when machining medium-strength materials and where slight impacts or interrupted cuts may occur. The result is a reliable compromise between wear resistance and fracture toughness, lowering the risk of premature edge failure in everyday turning. Clear guidance on selection and compatibility The insert is ISO‑standard; compatibility with a toolholder depends on form, relief angle, tolerance class, mounting style, size and thickness. For the DCET11T302, check holder suitability for a 11 mm plate size, 3.97 mm thickness, and the rhombic profile. Select the matching chipbreaker and grade according to workpiece material and required stability. When in doubt, choose a holder and clamp set that match the plate’s hole and countersink geometry to ensure repeatable seating and torque control. For process-secure, productive turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for tailored recommendations and to place orders; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance Technical Data Article number: 6737087 Manufacturer SKU: TUN6737087 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: SH725 Application: turning (external and internal) Facts Plate designation: DCET11T302 Plate size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 55° Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Plate shape: rhombic Chipbreaker: single-sided Suitable for variable engagement conditions ISO‑standard geometry for holder compatibility FAQ What is the primary application for this insert? The DCET11T302 SH725 insert is intended for external and internal turning, providing stable performance where edge toughness is required. Which materials is the insert suited for? With the SH725 coated carbide grade, the insert is designed for a broad range of materials and performs particularly well in conditions requiring a tough, edge‑stable grade. How does the hole and countersink affect clamping? The cylindrical hole with a countersink (40°–60°) ensures secure clamping and correct seating in holders designed for ISO rhombic plates, improving repeatability and torque distribution. What should be checked for holder compatibility? Verify holder form, relief angle, tolerance class, mounting style, size (11 mm) and thickness (3.97 mm) to ensure correct fit and stable clamping of the DCET11T302 insert. Is the chipbreaker suitable for long continuous cuts? The single‑sided chipbreaker is optimised for consistent chip control; selection should be matched to cutting parameters and material to achieve the desired chip form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of a robust combination of coated cemented carbide and a stable 55° rhombic form for consistent turning results; the tough SH725 grade delivers reliable cutting-edge performance and productive chip control. Order directly via Metav Werkzeuge or consult the technical team for tailored integration advice. DCET 11T302 SH725 DCET turning indexable insert by Tungaloy — 55° rhombic, 0.2 mm radius A DCET11T302 SH725 indexable insert for general external and internal turning, designed for stable cutting under varying engagement conditions. SH725 coated carbide for stable cutting 55° rhombic geometry for versatile turning Corner radius 0.2 mm for fine surface finish Cylindrical hole with 40°–60° countersink High-performance cutting where edge stability matters The SH725 grade is a coated cemented carbide formulated for edge toughness and consistent wear behaviour, particularly beneficial when engagement conditions change or when smaller tooling is used. As a result, the insert supports longer tool life and fewer interruptions to production. The single-sided chipbreaker helps to control chip flow in a wide range of steels and cast materials, reducing recutting and improving cycle reliability. Compatibility with holders is governed by form, 7° relief angle, tolerance class, fastening method, overall size and thickness, so selecting the correct clamping system is essential for predictable performance. Predictable finish and process control with a defined corner radius A 0.2 mm corner radius provides a balance between edge strength and the capability to achieve fine surface finishes on the workpiece. The insert’s 55° included angle and rhombic shape afford flexibility for both external profiling and light internal turning, while the 3.97 mm thickness contributes to insert rigidity under load. For process planning, the clearance angle and geometry influence cutting forces and vibration sensitivity; choosing the right feed and cutting speed reduces tool wear and secures consistent dimensional results, especially in serial production. Fast integration into ISO systems for secure clamping As an ISO-standardised indexable plate, the component integrates into common external holders and boring bars when matched by shape and fastening specifications. The cylindrical hole with one-sided countersink (40°–60°) simplifies positioning and ensures stable clamping with standard screws and underplates, reducing setup time. Where interchangeability is required across machines or tool families, the ISO designation and defined tolerances make inventory management and tool replacement more efficient, supporting continuous production flow. Material coverage and operational adaptability The insert’s design and the SH725 grade are optimised for a broad material range, with particular strength in steels and mixed-production environments where cutting conditions vary. The tough coating allows for productive machining with fewer edge failures, and the single-sided chip control assists operators when adapting to different workpiece materials. For applications demanding high repeatability and consistent surface quality, the combination of geometry and grade provides a reliable baseline for process standardisation. Contact Metav Werkzeuge for specific recommendations on holder compatibility, cutting parameters and fast delivery of Tungaloy turning grades. Technical data Article number: 6737088 Manufacturer SKU: TUN6737088 Model series: ISO indexable turning inserts Key measurements Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Special features Coating/grade: SH725 Material: cemented carbide, coated Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Form: rhombic, with hole FAQ What materials is the insert suited for? The DCET11T302 SH725 Tungaloy indexable insert is designed for broad material coverage, performing especially well in steels and mixed-production environments thanks to the tough SH725 grade and single-sided chipbreaker. How does the 0.2 mm corner radius affect finish? A 0.2 mm corner radius increases edge strength while enabling fine surface finishes; it reduces the risk of edge chipping compared with smaller radii and supports predictable dimensional control during turning operations. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the ISO designation of the insert ensures interchangeability with matching external holders and boring bars when these parameters are aligned. What role does the cylindrical hole and countersink play? The cylindrical hole with a one-sided countersink (40°–60°) enables precise seating and secure clamping with standard screws and underplates, improving stability and reducing setup time. Is this insert suitable for small tools and varying engagement conditions? Yes, the SH725 grade is formulated for toughness and edge stability, making it particularly suitable for smaller tools and operations where engagement conditions vary. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide grade (SH725), a 55° rhombic geometry and a secure clamping hole for consistent, productive turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCET11T302 SH725 indexable turning insert for turning – Tungaloy DCET11T302 SH725 is a rhombic, ISO-format indexable turning insert optimised for external and internal turning with a one-sided chipbreaker. SH725 coated carbide for stable cutting edges Rhombic insert, 55° cutting angle for versatile turning 0.2 mm corner radius for precise profile turning Cylindrical hole with 40°–60° countersink for secure clamping High-performance turning with a stable cutting edge The insert is manufactured as a coated carbide grade engineered for edge stability under varying engagement conditions. Its SH725 coating and substrate combination offers a balance between toughness and wear resistance, which is particularly advantageous when machining interrupted cuts or when using smaller tooling assemblies. The result is a consistent cutting action that reduces edge chipping and supports longer tool life, contributing to more predictable cycle times and fewer tool changes on production lines. Geometry and chip control for reliable productivity With a 55° rhombic geometry and a one-sided chipbreaker, the design provides a broad application range for both finishing and medium cutting operations. The geometry facilitates favourable chip flow and reduced cutting forces, while the chipbreaker helps form manageable chips even at varying depths of cut. Together, these features improve process stability and enable smoother machining sequences on CNC lathes and turret cutters, translating into fewer interruptions and higher throughput. Precision details that aid repeatability and clamping The insert includes a cylindrical hole with a single-sided countersink (40°–60°) to ensure accurate and repeatable seating in compatible toolholders. A 0.2 mm corner radius supports precise profile work and controlled transition radii on workpieces, while the 7° clearance angle reduces rubbing and heat generation at the flank. The plate thickness of 3.97 mm provides sufficient support under moderate cutting loads, helping to maintain geometry under load and deliver consistent surface finish. Practical selection advice and application areas As an ISO-format turning insert, the product is compatible with holders that match form, clearance angle, tolerance class, fastening and plate dimensions. It is suitable for typical external and internal turning operations; the SH725 grade is recommended where a tougher, edge-stable performance is required—especially useful for smaller tools or when cutting conditions vary. For best results, pair the insert with a holder suited to the intended feed and depth-of-cut and select coolant and speeds according to material and tooling specifications. If further clarification is required regarding holder compatibility or process parameters, technical consultants are available to assist. For tailored advice on the Tungaloy DCET11T302 SH725 insert and immediate availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and ordering support Technical data Manufacturer article number: 6737057 SKU (manufacturer): TUN6737057 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade / coating: SH725 Application: Drehen Plate designation: DCET11T302 Plate form: rhombic Plate size: 11 Plate thickness: 3.97 mm Clearance angle: 7° Cutting angle: 55° Corner radius: 0.2 mm Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Facts Inscribed size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance: 7° Cutting included angle: 55° Manufacturer article number: 6737057 SKU: 6737057-Tungaloy Special features ISO-formatted indexable turning insert Coated carbide grade for increased edge stability One-sided chipbreaker for controlled chip formation Cylindrical clamping hole with countersink for secure seating Suitable for external and internal turning Designed for small tools and variable engagement conditions FAQ What materials is this insert intended to machine? The insert in SH725 grade and carbide construction is designed primarily for general turning applications; selection of feeds and speeds should be matched to the workpiece material and machining strategy. How does the SH725 grade affect cutting performance? SH725 provides a tougher, edge-stable combination that helps resist chipping in interrupted cuts and varying engagement, improving tool life and process reliability for turning tasks. Which holders are compatible with this ISO-format insert? Compatibility requires a holder matching the ISO form, clearance angle, tolerance class, fastening, size and thickness; clamping is facilitated by the insert’s cylindrical hole and countersink. Is this insert suitable for finishing and medium cuts? Yes—the 55° rhombic geometry with a one-sided chipbreaker suits finishing and medium cutting ranges, offering good surface quality with controlled chip formation. What does the 0.2 mm corner radius mean for workpiece results? A 0.2 mm corner radius provides a controlled profile edge that helps achieve tighter radii on turned features and reduces stress concentrations compared with a sharp corner. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH730 Wendeplatten - Tungaloy
Take advantage of a tough, edge-stable grade combined with ISO-compliant geometry and reliable chip control to keep turning processes productive and consistent; order the insert directly via Metav Werkzeuge or consult the technical team for application support. DCET11T302 SH730 ISO rhombic turning insert for external and internal turning by Tungaloy The DCET11T302 SH730 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a coated cemented carbide grade optimised for stable cutting edges and variable engagement conditions. ISO rhombic insert 11 mm Coated carbide grade SH730 7° clearance angle for secure cutting Cylindrical hole with 40°–60° countersink Proven performance for consistent turning results The insert delivers reproducible cutting performance through its SH730 grade, a coated cemented carbide developed for toughness and edge stability. This composition is particularly effective in small tools and applications with changing depths of cut, where chip loads vary. The benefit is a longer effective tool life and fewer unplanned tool changes, which contributes to higher machine uptime and lower process cost per component. The ISO geometry ensures predictable engagement when paired with correctly specified holders. Controlled chip formation and improved surface finish A single-sided chipbreaker and the rhombic geometry combine to manage chips reliably while supporting consistent surface results. The 55° lead angle and 0.2 mm corner radius moderate cutting forces and help to reduce vibration in light finishing cuts, leading to improved part quality. Explaining the technical detail: the chipbreaker geometry shapes the chips at the point of cut, reducing the risk of entanglement and enabling safer high-speed removal. This delivers practical advantages in cycle time and downstream handling. Compatibility and simple integration into existing workflows The insert's ISO designation and dimensional data — 11 mm size and 3.97 mm thickness — facilitate straightforward replacement in standard ISO-compatible toolholders. Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness, so correct pairing safeguards clamping security and repeatable positioning. The insert's hole design, a cylindrical hole with single-side countersink (40°–60°), works with common clamping systems and replacement screws, reducing set-up time and simplifying inventory. Application guidance and technical support For turning operations where a balance of toughness and edge stability is required, this grade offers a cost-effective solution by keeping tool changes to a minimum. For specific material applications or to verify suitability for certain steels or interrupted cuts, use the technical notes on compatibility and the described holder requirements. If there is any uncertainty about the machining conditions or the correct chipbreaker choice, the Metav Werkzeuge technical team can provide tailored recommendations and additional data to match the insert to the machining strategy. For a professional recommendation or to secure supply of Tungaloy turning inserts, contact Metav Werkzeuge for application advice and prompt delivery coordination Technical Data Article number: 6856625-Tungaloy Manufacturer article number: 6856625 SKU manufacturer: TUN6856625 Brand: Tungaloy Model series: ISO turning insert series Designation: DCET11T302 SH730 Numbers / Core technical data Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Lead angle: 55° Special features / Versions Shape: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Grade: SH730 Material: coated cemented carbide Application: turning (external and internal) ISO designation: 11T302 FAQ What materials is this insert suited for? The DCET11T302 SH730 insert is designed as a tough, edge-stable grade suitable for a broad range of steels and variable cutting conditions; consultation is recommended for specialised alloys. How does the SH730 grade affect tool life? SH730 provides enhanced toughness and edge stability, which reduces chipping under changing engagement and can extend usable tool life for the DCET11T302 SH730 turning insert. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness; the insert’s ISO geometry and hole style fit standard ISO-compatible external and internal turning holders. What is the advantage of the single-sided chipbreaker? The single-sided chipbreaker in this insert improves chip control for many turning tasks, reducing the chance of long, stringy chips and aiding consistent surface finish with the DCET11T302 SH730. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH730 Wendeplatten - Tungaloy
Reliable chip control and a wear‑resistant coated carbide grade ensure consistent turning performance and long tool life; the compact rhombic geometry with a 0.2 mm corner radius delivers precise finishing even under varying engagement. Order directly via Metav Werkzeuge or contact the technical team for holder compatibility and application advice. DCET 11T302 SH730 Tungaloy indexable insert for turning The DCET11T302 SH730 is an ISO‑standard rhombic indexable insert for precision external and internal turning, designed for changing engagement conditions and small‑tool applications. Coated carbide SH730 for tough cutting Rhombic 11 mm insert, 55° cutting angle One‑sided chipbreaker for consistent chips 0.2 mm corner radius for fine finishing Stable cutting performance for variable engagement The combination of an ISO‑compliant rhombic geometry and the SH730 coated carbide grade provides a balance between toughness and edge stability. This leads to reliable chip control during interrupted cuts and variable depths of cut, reducing the risk of edge chipping. The insert’s 0.2 mm corner radius supports fine finishing passes while maintaining repeatable dimensional results, which is especially beneficial in short‑run production or when toolholders experience changing engagement conditions. Clear mounting and holder compatibility for secure operation Designed as an ISO‑normed turning insert, the component features a mounting hole with a cylindrical bore and a single‑side countersink (40°–60°), which assists in secure locating and clamping. The insert’s compatibility with a holder depends on form, relief angle, tolerance class, fastening, size and thickness; the 7° relief angle and 55° cutting angle are decisive parameters when selecting an appropriate external holder or boring bar. Choosing the correct holder‑insert match ensures stable cutting forces and reduces vibration for improved surface quality. Durable grade and productivity advantages The SH730 grade is a coated carbide developed for tough, edge‑stable performance. Its composition promotes stable chip formation and extended edge life, which lowers tool change frequency and increases uptime. For workshops seeking economy and consistency, this attribute translates into predictable productivity gains: less unplanned downtime, fewer insert changes and a steadier part finish across batch runs. The insert’s 3.97 mm thickness contributes to robust clamping and resistance to mechanical stress. Practical selection guidance for machining tasks The insert is suitable for both external and internal turning; selecting the correct chipbreaker and grade depends on workpiece material and machining strategy. For softer materials, a more pronounced feed with the one‑sided chipbreaker yields controlled chips and efficient evacuation. For harder or interrupted turning, the SH730 grade helps maintain cutting edge integrity. When in doubt about holder fit or optimal cutting data, consult the technical documentation or the supplier to align feed, speed and depth of cut with the insert’s geometry and grade. For precision turning solutions with Tungaloy’s SH730 grade, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6856656 Manufacturer SKU: TUN6856656 SKU: 6856656-Tungaloy ISO designation: DCET11T302 Facts Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 55° Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Special features Rhombic insert shape Coated carbide (SH730) One‑sided chipbreaker ISO‑standard turning insert Application: turning Material: coated carbide FAQ What materials is this insert suited for? The DCET11T302 SH730 insert is a coated carbide grade designed for a broad range of turning tasks where toughness and edge stability are required; select the chipbreaker and cutting data according to the specific workpiece material. How does the SH730 grade improve productivity? SH730 provides stable chip formation and enhanced edge life, which reduces insert changes and improves machine uptime when using the DCET‑type indexable insert. Which holder parameters matter for correct fitment? Form, relief angle (7°), tolerance class, fastening method, size (11 mm) and thickness (3.97 mm) determine compatibility with the holder; ensure the holder matches the insert’s ISO designation. Is the insert suitable for interrupted cuts? Yes; the toughness and edge stability of the SH730 coating make the insert resilient under interrupted cutting and varying engagement conditions. What is the purpose of the one‑sided chipbreaker? The one‑sided chipbreaker is intended to produce predictable chip forms and reliable evacuation in many turning scenarios, supporting consistent surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com