DCGT 070201 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a coated carbide SH7025 grade, a precise 0.1 mm corner radius and a 7° clearance angle to secure consistent, repeatable turning performance; order via Metav Werkzeuge or consult our specialists for application advice. DCGT 070201 SH7025 indexable turning insert — for precision turning with coated carbide and 0.1 mm radius (Tungaloy) DCGT 070201 SH7025 is an ISO-conforming indexable insert designed for general external and internal turning applications where edge stability and predictable chip flow are required Coated carbide SH7025 for robustness 7° relief angle for secure cutting 0.1 mm corner radius for fine detail Cylindrical hole with 40°–60° countersink Stable cutting and predictable chip control for productive turning The combination of SH7025 grade and a coated carbide substrate provides a balance between toughness and wear resistance, making the insert well suited to variable engagement conditions. The one-sided chipbreaker geometry promotes controlled chip formation, reducing interruptions during production and supporting higher metal removal rates. By favouring a stable cutting edge, the insert contributes to longer tool life and fewer insert changes, which in turn supports consistent cycle times and lower process cost per component. Compatibility with ISO toolholders is governed by form, clearance, tolerance class, fixing method, size and thickness, ensuring the insert can be selected precisely for the holder in use. Precision edge geometry for improved surface finish and small-feature turning A 0.1 mm corner radius and the rhombic plate form enable close-in machining and fine-detail external or internal profiling with minimal vibration. The 7° clearance reduces rubbing while maintaining a supportive cutting face, which helps to achieve repeatable dimensional accuracy and improved surface quality. For operators less familiar with insert geometry, the corner radius determines the smallest achievable contour detail while the clearance angle prevents flank contact that would otherwise degrade finish. These geometric decisions translate directly into fewer secondary operations and better first-pass yield for turned parts. Simple mounting, versatile application and reliable performance The insert’s cylindrical hole with a 40°–60° one-sided countersink gives robust seating in matched ISO holders or boring bars, simplifying index changes and assembly. With a nominal plate thickness of 2.38 mm and size designation 07 in the ISO family, the indexable blade fits common turning systems used in workshops and production cells. The coated carbide composition of the grade supports machining of a wide range of steels and mixed batches where tool life and edge stability are priorities. Tungaloy’s production standards and the SH7025 microstructure are aimed at stable chip formation and repeatable cutting performance, contributing to predictable results day to day. For assured turning performance with Tungaloy’s SH7025 grade, contact Metav Werkzeuge for tailored application support and order options: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 7743489 Manufacturer SKU: TUN7743489 SKU: 7743489-Tungaloy Model series: ISO turning indexable inserts Core dimensions Plate form: rhombic Size: 07 Plate thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Insert angle: 55° Materials & special features Grade/coating: SH7025 Cutting material: coated carbide Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning System components: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws FAQ What holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness; the DCGT 070201 SH7025 fits ISO holders specified for rhombic 07 inserts with a cylindrical hole and countersink. Which materials can be machined with this grade? The SH7025 coated carbide grade is designed for robust edge stability and is suitable for a broad range of steels and mixed batches under varying engagement conditions. What does the 0.1 mm corner radius mean for finish? A 0.1 mm corner radius supports fine-detail turning and improved surface quality on contoured features while offering a compromise between edge strength and geometric precision. How does the one-sided chipbreaker affect machining? The one-sided chipbreaker promotes controlled chip formation for predictable evacuation and consistent cutting forces, which helps maintain process stability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 grade and ISO conformity for dependable turning performance; the combination of a coated cemented carbide substrate and a secure, countersunk hole delivers repeatable clamping and stable chip control. Order the insert directly via Metav Werkzeuge or ask the consultants for compatibility advice. DCGT 070201 SH725 indexable insert for turning by Tungaloy DCGT070201 SH725 is an ISO-standard indexable insert designed for external and internal turning, offering a balance of toughness and edge stability for variable engagement conditions. ISO rhombic insert, size 07 SH725 coated cemented carbide 0.1 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Stable cutting with a tough, coated substrate The insert is manufactured in a coated cemented carbide grade that prioritises stability and consistent edge life under changing cut conditions. The SH725 specification is a tougher, edge-stable grade that suits smaller tools and intermittent engagement, reducing the risk of premature edge breakdown. By combining a robust substrate with a single-sided chipbreaker profile, this geometry promotes controlled chip control and predictable tool life, which supports steady production throughput and fewer unscheduled tool changes. Geometry engineered for precision and secure clamping A 0.1 mm corner radius and rhombic form with a 55° included angle provide controlled contact and a fine surface finish in turning operations. The insert’s nominal relief angle 7° and 2.38 mm thickness give mechanical stiffness in the seat, while the cylindrical hole with a 40°–60° countersink ensures precise locating and reliable clamping in compatible ISO holders. These geometric features reduce vibration and contribute to repeatable part tolerance, making the component suitable where consistent finish and dimensional control are required. Fit-for-purpose choice for modern turning workflows As an ISO-standard insert, the component integrates into standard holder systems when form, relief angle, tolerance class, attachment method, size and thickness are matched. The DCGT070201 SH725 insert lends itself to quick index changes and low-complexity stocking, supporting a productive machining cycle with minimal downtime. Selecting the correct chipbreaker and matching the grade to the workpiece material will maximise productivity and extend effective tool life, delivering economic benefits over multiple production runs. For consistent, high-stability turning performance opt for the Tungaloy DCGT070201 SH725 insert; contact Metav Werkzeuge for technical matching or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6737010 Manufacturer SKU: TUN6737010 SKU: 6737010-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.1 mm Included angle: 55° Relief (free) angle: 7° Thickness: 2.38 mm Size: 07 Special features Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Grade: SH725 coated cemented carbide Chipbreaker: single-sided Application: turning (external and internal) ISO compatibility depends on form, relief angle, tolerance, attachment, size, thickness FAQ What is the primary application for this insert? The DCGT070201 SH725 indexable insert from Tungaloy is designed primarily for external and internal turning operations, offering edge stability and suitability for a range of turning tasks. Which workpiece materials are best matched to SH725? The SH725 coated cemented carbide grade offers toughness and edge stability for variable engagement conditions; the DCGT070201 is therefore appropriate for general turning applications where a robust edge is required. How does the hole and countersink affect mounting? The cylindrical hole with a one-sided 40°–60° countersink ensures accurate seating and secure clamping in compatible ISO toolholders, improving repeatability when the correct holder and clamping kit are used. What geometry features help achieve fine surface finish? The 0.1 mm corner radius combined with the rhombic form and 55° included angle reduces cutting forces at the edge, assisting in achieving a finer surface finish and consistent dimensional control. How to verify compatibility with existing toolholders? Compatibility is determined by form, relief (free) angle, tolerance class, attachment type, size and thickness; matching these parameters ensures the DCGT070201 SH725 insert fits and functions correctly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 SH725 Wendeplatten - Tungaloy
Benefit from the combination of an ISO-standard rhombic geometry, the SH725 tough coated-carbide grade and a fine 0.1 mm nose radius for reliable turning results; order directly via Metav Werkzeuge or consult our specialists for compatibility checks. DCGT070201 SH725 — DCGT turning insert for turning (Tungaloy) DCGT070201 SH725 is an ISO-standard indexable turning insert designed for external and internal turning applications, offering a tough coated-carbide grade and compatibility with common ISO holders Rhombic 07 form, 55° included angle Coated carbide grade SH725 0.1 mm nose radius for fine detail 7° clearance angle, 2.38 mm thickness Consistent cutting performance where stability matters The SH725 coated-carbide grade delivers a tough, edge-stable cutting edge suited to variable engagement conditions and smaller toolholders. Because the grade is formulated for durability and stable chip formation, the insert sustains more consistent cutting forces and reduces the frequency of edge changes. As an ISO-standard component, it integrates into established turning tool systems so replacement and inventory management remain straightforward. Geometry engineered for accuracy and surface finish The rhombic 07 geometry with a 55° included angle and a 0.1 mm nose radius supports precise contouring and dimensional control in turning operations. The 7° clearance angle minimises rubbing while the 2.38 mm plate thickness ensures sufficient support under moderate loads. These geometry parameters translate into improved part finish and repeatable tolerances, particularly when fine detail and tight edges are required. Secure mounting and application flexibility for production demands Designed with a cylindrical hole plus single-sided countersink (40°–60°) and a single-sided chipbreaker, the insert provides reliable clamping and predictable chip control when paired with a matching ISO external holder or boring bar. The coated carbide substrate makes the grade adaptable across a broad range of turning tasks; select the chipbreaker style and holder that suit the workpiece material and cutting conditions to achieve the best productivity and tool life. Discuss compatibility and application advice with Metav Werkzeuge — request a technical assessment for this Tungaloy turning insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737135 Manufacturer SKU: TUN6737135 SKU: 6737135-Tungaloy Model series: ISO turning inserts Facts Radius: 0.1 mm Thickness: 2.38 mm Included angle: 55° Clearance angle: 7° Size: 07 Special features Material: carbide Coating/grade: SH725 (coated carbide) Plate form: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What materials is this insert suitable for? The SH725 grade is designed for general turning tasks and provides good edge stability across a broad range of materials; match the chipbreaker and holder to the specific workpiece for optimal results. How does the 0.1 mm nose radius affect finish and strength? A 0.1 mm nose radius gives a fine cutting edge for good surface finish while maintaining sufficient edge strength for light to moderate turning passes with this coated-carbide grade. Is the DCGT070201 compatible with standard ISO external holders? Yes, the insert follows ISO geometry and is compatible with holders that accept rhombic 07 inserts, taking into account form, clearance, tolerance class and clamping method. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker promotes predictable chip formation in many turning operations; pairing it with the appropriate feed and speed settings improves evacuation and surface quality. Does the insert require a specific clamping screw or pad? Clamping depends on the chosen holder system; the insert’s cylindrical hole with countersink is designed to work with standard ISO seats and matching clamping hardware. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 SH725 Wendeplatten - Tungaloy
The combination of a coated cemented carbide grade optimized for stability (SH725), a compact rhombic 07 geometry with a 0.1 mm corner radius, and ISO compatibility ensures reliable chip control and consistent cycle times in turning operations; order directly via Metav Werkzeuge or contact our specialists for tailored advice. DCGT 070201 SH725 turning insert by Tungaloy The DCGT 070201 SH725 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning where stable cutting edges and predictable performance are required. Coated cemented carbide grade SH725 ISO rhombic 07 geometry for versatile turning 0.1 mm corner radius for fine finishing 7° clearance angle supports stable cutting Cylindrical hole with 40°–60° countersink Engineered for dependable productivity and extended tool life The insert uses a coated cemented carbide substrate in the SH725 grade, specifically developed for high edge stability and predictable wear behaviour. This composition reduces unexpected edge chipping and extends tool life, particularly useful when smaller tools or variable engagement conditions are present. The robust coating improves resistance to abrasive wear while maintaining cutting performance, which translates into fewer indexings, reduced production interruptions and a lower total cost per component. Where repeatability and cycle‑time consistency matter, the combination of material and grade delivers measurable gains in productivity. Seamless system compatibility to reduce setup time Designed to the ISO standard, the rhombic 07 format and defined mounting features ensure compatibility with a wide range of holders and boring bars. The insert’s cylindrical hole with one‑sided countersink (40°–60°) and defined 7° clearance simplify secure clamping and positional repeatability, so setup times and fixture adjustments are reduced. Because compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness, choosing an ISO indexable insert like this one helps maintain interchangeability across tool inventories and supports efficient tool management in batch and job‑shop environments. Optimised edge geometry for finishing accuracy and reliable chip control A 0.1 mm corner radius offers a fine edge for superior surface finish in finishing passes and for light to medium roughing where component tolerance is tight. The single‑sided chipbreaker geometry assists in breaking and evacuating chips reliably, reducing the risk of re-cutting and improving surface quality. For applications that demand precision—such as turned parts with close tolerances or fine bore finishes—this configuration provides a balance of precision and strength. When combined with the SH725 grade, it is particularly suitable where cutting conditions vary and a stable edge is essential. For procurement or technical guidance on the Tungaloy DCGT 070201 SH725 insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and application optimisation. Technical data Article number: 6838677 Manufacturer SKU: TUN6838677 Insert designation: DCGT070201 Grade: SH725 Material: Coated cemented carbide Application: Turning Shape: Rhombic 07 Corner radius: 0.1 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single‑sided System: ISO indexable turning inserts Facts Corner radius: 0.1 mm Thickness: 2.38 mm Size: 07 Clearance angle: 7° Included angle: 55° Manufacturer article number: 6838677 Manufacturer SKU: TUN6838677 Special features Coated cemented carbide grade SH725 ISO‑standard indexable insert Rhombic geometry for external and internal turning Cylindrical hole with one‑sided countersink Single‑sided chipbreaker for controlled chips Compatible with ISO holders and boring bars FAQ What turning operations is this insert best suited for? This insert is intended for external and internal turning; the rhombic geometry and SH725 grade make it suitable for finishing and light to medium roughing where edge stability is important. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius provides a fine cutting edge that improves surface quality on finishing passes while still offering sufficient strength for controlled material removal. Will this insert fit existing ISO holders and boring bars? The insert is ISO‑compliant (DCGT070201) and its compatibility is based on form, clearance angle, tolerance, fastening and thickness, so it is compatible with holders designed for rhombic 07 ISO inserts. What advantages does the SH725 grade offer? The SH725 grade delivers enhanced edge stability and consistent wear behaviour, especially beneficial when cutting conditions vary or when smaller tool geometries are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide grade designed for toughness and a compact 0.1 mm nose radius for precise turning results; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DCGT 070201 SH725 Tungaloy — ISO rhombic turning insert for general turning DCGT 070201 SH725 is an ISO‑form indexable insert developed for external and internal turning applications, offering a tough, edge‑stable grade for variable engagement and small‑tool use. Coated carbide grade SH725 for toughness Rhombic 07 form with 55° included angle 7° clearance angle for reliable chip control Consistent cutting performance with tough coated carbide The insert delivers consistent cutting performance through a coated carbide substrate formulated as SH725, a tough, edge‑stable grade intended for turning operations where changing engagement and smaller toolholders occur. The combination of the coating and carbide substrate reduces microchipping and supports longer intervals between index changes, helping to maintain stable cycles on production flights. This paragraph explains how a tougher grade benefits tool life and process stability rather than only listing material data. Secure compatibility and mounting for repeatable clamping Compatibility depends on the holder geometry, clearance, tolerance class, fixing method, size and thickness; the ISO geometry and the rhombic form simplify selection for standard external or internal holders. The insert is supplied in a format that requires a matching outer holder or boring bar together with a shim/locking kit and replacement screws for proper assembly. The centre hole with a cylindrical bore and one‑sided countersink (40°–60°) provides positive location and stable clamping, reducing movement under cut and supporting repeatable set‑up. Application guidance and functional benefits in everyday machining For turning, the 0.1 mm nose radius suits light profiling and finishing where accurate edge contact is essential and where small radii improve corner definition. The one‑sided chipbreaker requires selection matched to the workpiece and machining stability; choosing the correct chipbreaker and grade will improve chip control and surface finish. The insert is part of a system approach: an ISO indexable insert, a correctly matched holder and the appropriate clamping parts deliver the best outcome. Clear explanations are provided so less experienced users can understand why geometry, chipbreaker and grade matter for specific turning tasks. Contact Metav Werkzeuge for tailored advice on Tungaloy inserts and to order the DCGT 070201 SH725 through our sales team. Technical data Article number: 6737011 Manufacturer SKU: TUN6737011 SKU: 6737011-Tungaloy Model series: ISO indexable turning inserts Grade: SH725 Material: carbide Core specifications Nose radius: 0.1 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Size: 07 Special features Rhombic form (DCGT) With hole: cylindrical bore + one‑sided countersink (40°–60°) One‑sided chipbreaker Intended application: turning System components: insert, outer holder or boring bar, shim/locking kit and replacement screws FAQ What turning tasks is this insert best suited for? The DCGT 070201 SH725 Tungaloy indexable insert is intended for external and internal turning where a tough, edge‑stable grade and a small nose radius are required, especially in operations with variable engagement or smaller toolholders. How does the SH725 grade affect tool life and performance? SH725 combines a coated carbide substrate designed for toughness and stable cutting edges; this improves resistance to chipping and extends effective tool life for the DCGT 070201 insert in interrupted or unstable cuts. Which holder features are required to use this insert correctly? Compatibility is governed by holder form, clearance angle, tolerance class, fixing method, size and thickness; using a matching ISO‑form outer holder or boring bar with the appropriate shim and screws ensures secure clamping of the insert. What does the hole style provide in practical terms? The cylindrical bore with a one‑sided countersink (40°–60°) provides positive location and improved clamping stability, which helps to reduce movement under load and maintain repeatable set‑ups. Can the small 0.1 mm nose radius be used for finishing? Yes. The 0.1 mm nose radius is suited to light profiling and finishing where fine corner definition and controlled contact reduce the risk of forming a blunt edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070201 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH730, precise ISO geometry and a small 0.1 mm corner radius to achieve stable cutting results and efficient tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. DCGT 070201 SH730 Turning insert by Tungaloy – coated carbide, 55° DCGT070201 SH730 Tungaloy indexable insert designed for ISO-compatible external and internal turning applications, offering robust edge stability for varying engagement conditions Coated carbide grade SH730 ISO rhombic insert size 07 55° cutting geometry for general turning 0.1 mm corner radius for fine finishing Stable cutting performance from advanced coating and grade The SH730 grade is a coated carbide developed for high edge stability and reliable wear behaviour, especially useful where engagement conditions change or where smaller tools are used. The coating improves resistance to abrasive wear and assists heat management so that the insert sustains consistent performance over longer tool life. For production environments requiring predictable results, this material choice reduces unplanned tool changes and supports stable process windows. Predictable chip control and secure clamping with ISO geometry An ISO rhombic format combined with a 55° cutting geometry and 7° clearance delivers a versatile tool face for a wide range of turning tasks. The insert is supplied with a cylindrical hole and one-sided countersink (40°–60°) for secure fastening; compatibility with holders is determined by form, clearance angle, tolerance class, fastening type, size and thickness. The integrated single-sided chipbreaker aids controlled chip formation under typical turning feeds, lowering the risk of stringing and improving surface finish. Practical benefits for process optimisation and setup With a 0.1 mm corner radius and a plate thickness of 2.38 mm, this insert is suited to finishing and semi-finishing passes where dimensional control and surface quality matter. Using ISO-standardized inserts within a system — insert, clamping set, shim and screws — simplifies tool changes and spare-part management on the shop floor. Selecting a matching chipbreaker and the SH730 grade according to workpiece material and machine stability helps to shorten set-up times and increase overall productivity. For tailored recommendations on Tungaloy turning inserts such as the SH730 grade, contact Metav Werkzeuge for application advice and ordering — info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6854000 Manufacturer SKU: TUN6854000 Manufacturer item number: 6854000 Facts Insert designation: DCGT070201 Grade: SH730 Material: carbide Shape: rhombic (07) Thickness: 2.38 mm Clearance angle: 7° Cutting angle: 55° Corner radius: 0.1 mm Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Special features ISO turning insert series for external and internal turning Coated carbide for stable edge and extended life Compatibility depends on holder form, size and fastening Suitable for finishing and semi-finishing operations FAQ What materials can be machined with this insert? The DCGT070201 SH730 Tungaloy indexable insert is designed for general turning; the SH730 grade offers broad material coverage and is particularly effective where edge stability is required. How does the SH730 coating benefit daily production? The coating on the SH730 grade enhances wear resistance and thermal behaviour, which helps to prolong tool life and maintain consistent cutting performance on the DCGT070201 insert. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening type, size and thickness; the insert’s cylindrical hole with one-sided countersink ensures secure clamping when matched to the correct ISO holder. What is the recommended use for the 0.1 mm corner radius? A 0.1 mm corner radius is suited to finishing and light semi-finishing passes where surface quality and dimensional accuracy are priorities. Does the insert include a chipbreaker and what is its effect? The DCGT070201 comes with a single-sided chipbreaker designed to promote controlled chip formation, improving surface finish and reducing risk of long, stringing chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 TH10 Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility, a sharp TH10 uncoated carbide grade and a 55° rhombic geometry for stable, low‑force turning of non‑ferrous materials. Order the inserts directly via Metav Werkzeuge or consult the technical advisers for selection support and availability. DCGT 070201 TH10 ISO turning insert by Tungaloy — 55° rhombic, 7° relief A DCGT070201 TH10 insert for ISO‑standard turning, designed for external and internal operations and optimised for clean finishes on non‑ferrous workpieces ISO insert DCGT 070201 format Uncoated carbide TH10 grade 55° rhombic with 0.1 mm corner radius Cylindrical hole with 40°–60° countersink Engineered for predictable turning performance The DCGT070201 is supplied in an ISO‑standard geometry to ensure repeatable fit and clamping when paired with compatible holders. Compatibility is determined by form, 7° relief angle, tolerance class, fastening type, plate size and 2.38 mm thickness, which together deliver stable cutting conditions. The rhombic 55° included angle gives a good balance between accessibility and cutting edge strength, making the insert a reliable choice where consistent dimensional control and process stability are required. Low‑force cutting and superior surface quality The uncoated carbide TH10 is a sharp, universal grade developed for non‑ferrous materials and for operations where a bare cutting edge promotes low cutting forces and a clean surface finish. This characteristic reduces built‑up edge and helps maintain repeatable tolerances in light‑to‑medium cuts; machining becomes more efficient through lower spindle loads and improved contact conditions. The single‑sided chipbreaker supports controlled chip formation, which further aids surface quality and predictable tool behaviour. Secure clamping and straightforward tool‑set integration A secure interface is provided by the cylindrical hole together with a one‑side countersink (40°–60°), giving reliable clamp seating and straightforward repeatable installation in ISO holders and boring bars. The modest 0.1 mm corner radius balances edge strength and finishing capability, while the 2.38 mm plate thickness contributes to rigidity under load. Specified as a size 07 rhombic insert, it integrates easily into common turning systems; the combination of geometry and grade supports efficient changeover, reduced downtime and a stable production flow. If further clarification on holder selection or process parameters is required, technical advisers are available to assist. For specific machining advice, availability or to order the Tungaloy DCGT 070201 TH10 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate technical assistance. Technical Data Article number: 6802778 Manufacturer SKU: TUN6802778 SKU: 6802778-Tungaloy Label: DCGT070201 TH10 Tungaloy insert Model series: ISO turning inserts Material: Carbide Application: Turning Facts Included angle: 55° Relief angle: 7° Plate thickness: 2.38 mm Corner radius: 0.1 mm Size: 07 Special features Uncoated carbide grade TH10 Single-sided chipbreaker Rhombic plate form With hole: cylindrical hole + one-side countersink (40°–60°) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade of the DCGT070201 insert is designed primarily for non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and a clean surface finish. How does the plate geometry affect machining? The 55° rhombic geometry and 0.1 mm corner radius provide a compromise between accessibility and edge strength, helping to maintain surface quality and dimensional consistency during turning operations with the Tungaloy insert. Is the insert compatible with standard ISO holders? Compatibility with ISO holders depends on form, relief angle, tolerance class, fastening and plate dimensions; the DCGT070201 conforms to ISO turning‑insert dimensions and uses a cylindrical hole with countersink for secure clamping. What chip control can be expected? This insert features a single‑sided chipbreaker matched to the TH10 grade, enabling controlled chip formation in external and internal turning and contributing to consistent surface finish and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade (TH10) that promotes low cutting forces and clean finishes, combined with an ISO-standard rhombic geometry (55°) for broad compatibility with ISO holders; order the DCGT070201 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT070201 TH10 ISO Turning Insert, uncoated carbide, 55° rhombic – Tungaloy A DCGT070201 TH10 ISO-standard rhombic turning insert in uncoated carbide, designed for external and internal turning where low cutting forces and fine surface finish are required. *ISO rhombic 55° insert, compatible with ISO holders *Uncoated carbide grade TH10 for low cutting forces *Size 07 with 0.1 mm corner radius *Cylindrical hole with single-sided countersink Consistent productivity through ISO-compatible geometry The rhombic 55° geometry with a 7° clearance angle offers a dependable seating and repeatable cutting edge orientation in standard toolholders. This regularised form ensures straightforward indexability and predictable cutting behaviour, which supports process stability in shop-floor production. The combination of ISO standardisation and clear dimensional data simplifies tool planning and holder selection, reducing setup time and avoiding unnecessary trial-and-error. Clean surfaces and controlled chip flow for non-ferrous work The uncoated TH10 carbide grade is a sharp universal option tailored to non-ferrous materials and operations where an uncoated cutting edge helps to keep cutting forces low and surfaces tidy. The insert’s single-sided chipbreaker design guides chips away from the cutting zone, improving surface quality and reducing the need for secondary finishing. For users less familiar with chipforming technology, the chipbreaker’s role is to break and channel chips so that they do not interfere with the cutting edge or part finish. Clear mounting features for reliable clamping and regrind planning The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°), enabling secure fastening with standard screws and clamping sets. Key dimensions are explicit: size 07, thickness 2.38 mm and a 0.1 mm corner radius, allowing precise selection of compatible holders and predictable part geometry after machining. These measurable values support maintenance planning and, where regrinding is considered, help estimate remaining serviceable edge length. Practical application advice and material coverage Designed primarily for turning operations on non-ferrous alloys, the insert suits both external and internal machining when low forces and good surface integrity are priorities. The uncoated carbide grade is not intended for high-temperature or heavy interrupted cuts typical of hardened steels; matching the chipbreaker and grade to the specific material and machining condition is essential for best results. For production contexts where consistent edge life and predictable chip behaviour are required, pairing this insert with suitable tooling components delivers repeatable outcomes and efficient cycle times. For tailored advice on Tungaloy turning inserts or to reserve the DCGT070201 TH10 for your next production run, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability. Technical data Manufacturer article number: 6802775 Manufacturer SKU: TUN6802775 Seller SKU: 6802775-Tungaloy Model series: ISO turning indexable inserts Name: DCGT070201 TH10 Tungaloy insert Core specifications Geometry angle: 55° Plate size: 07 Thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Countersink angle: 40°–60° Special features Uncoated carbide grade TH10 Single-sided chipbreaker Cylindrical hole with single-sided countersink Rhombic plate form For external and internal turning FAQ Which toolholders are compatible with this insert? The DCGT070201 TH10 is an ISO-standard rhombic insert and is compatible with holders designed for DCGT 07 inserts; compatibility depends on form, clearance, tolerance class and screw/clamping arrangement. Is this insert suitable for aluminium and brass machining? Yes, the uncoated TH10 carbide grade is intended for non-ferrous materials such as aluminium and brass, where a sharp, uncoated edge supports low cutting forces and good surface finish. What does the single-sided chipbreaker achieve? The single-sided chipbreaker promotes controlled chip formation and evacuation, helping to maintain a clean cutting zone and consistent surface quality during turning operations. Can the insert be used for interrupted cuts or heavy roughing? This insert is optimised for lower-force, finish-oriented turning on non-ferrous materials; for heavy interrupted cuts or roughing in hard materials, consider more robust grades or geometries designed for high impact. How to interpret the corner radius for part finish and strength? The 0.1 mm corner radius on this insert balances edge strength and the ability to produce fine surface finishes; it reduces the risk of small chatter marks while still allowing tight corner radii on the workpiece. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, precise 55° rhombic geometry and a dedicated one-sided chipbreaker for reliable turning operations. Order the insert directly via Metav Werkzeuge or request application advice from their consultants. DCGT070202 AH725 Tungaloy indexable turning insert — PVD‑coated carbide, 55° rhombic geometry DCGT070202 AH725 Tungaloy indexable turning insert designed for general turning of steel and stainless steel with high process reliability PVD-coated carbide AH725 for reliable wear resistance Universal grade suitable for steel and stainless steel Rhombic form with 55° included angle One-sided chipbreaker for consistent chip control Reliable performance for mixed-material turning The PVD-coated carbide composition and the AH725 grade provide a balance of toughness and wear resistance suited to variable shop conditions. Designed as an ISO-standard turning insert, the geometry supports stable cutting in both interrupted and continuous cuts. The combination of a fracture‑resistant grade and focused coating technology reduces flank wear and prolongs effective tool life, which translates into fewer indexings and predictable change intervals on production runs. Precision geometry for consistent results A rhombic 55° geometry with a 0.2 mm corner radius ensures a good compromise between edge strength and profile definition. The insert’s 7° relief angle and 2.38 mm plate thickness contribute to secure clamping and stable cutting forces when paired with a compatible holder. The single‑sided chipbreaker is engineered to shape chips reliably for turning operations, improving surface finish and reducing the risk of built-up edge when machining steel and stainless steel. Compatibility and application guidance Compatibility with toolholders is determined by the insert form, relief angle, tolerance class, clamping arrangement, size and thickness. This indexable cutting insert includes a cylindrical centre hole with a single‑side countersink (40°–60°) suitable for standard clamping systems. The AH725 grade is particularly useful where machining mixes of steel and stainless steel occur, smaller tool setups are used, or where increased demand on process security exists; it offers broad material coverage and stable chip formation. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DCGT070202 AH725 insert and to request suitable holder recommendations — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: 6857016 Manufacturer SKU: TUN6857016 Label: DCGT070202 AH725 Tungaloy‑Wendeplatte Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Facts Size designation: 07 Plate thickness: 2.38 mm Included angle: 55° Relief angle: 7° Corner radius: 0.2 mm Special features PVD‑coated carbide, grade AH725 Rhombic plate form One‑sided chipbreaker With hole: cylindrical hole + single‑side countersink (40°–60°) ISO‑standardised indexable turning insert Compatibility depends on form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The DCGT070202 AH725 insert is formulated for machining steel and stainless steel and performs well where material mixes occur, thanks to the universal, fracture‑resistant AH725 grade. How is the insert clamped in a holder? The insert features a cylindrical centre hole with a single‑side countersink (40°–60°) and is designed for standard clamping systems that match the insert’s form, thickness and tolerance class. Can the insert be used for both external and internal turning? Yes, the geometry and chipbreaker design make the insert suitable for both external and internal turning applications when paired with an appropriate external holder or boring bar. What does the AH725 grade offer compared with other grades? AH725 is a PVD‑coated, universal grade offering good fracture resistance and broad material coverage; it is particularly effective in setups requiring high process reliability and in smaller‑scale tooling assemblies. How to identify the correct replacement insert? Match the ISO designation, size (07), thickness (2.38 mm), corner radius (0.2 mm) and the presence of the centre hole and countersink; the DCGT070202 AH725 identifier and the manufacturer SKU TUN6857016 verify the specific article. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant cermet grade and precise ISO‑standard geometry for consistent finishing results and longer tool life. Order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and cutting-data recommendations. DCGT070202 GT9530 indexable turning insert, coated cermet – Tungaloy A DCGT070202 GT9530 indexable turning insert developed for external and internal turning, offering a fine 0.2 mm corner radius and a wear-resistant cermet grade for stable finishing of steel Wear‑resistant GT9530 cermet grade ISO‑standard rhombic 07 form 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° chamfer Consistent finishing with a wear‑resistant cermet grade The coated GT9530 cermet composition is engineered for stable finishing and light universal turning of steel, delivering improved surface quality and extended tool life under steady machining conditions. Its 0.2 mm corner radius allows for precise surface generation on turned components while reducing the risk of edge chipping during finishing passes. In workshop practice, this translates into fewer interruptions for index changes and a more predictable production flow, particularly where fine surface tolerances are required. The grade’s coating enhances abrasive resistance, contributing to consistent performance over longer runs. ISO compatibility and secure clamping for reliable machining Supplied in an ISO‑compliant rhombic form, the insert integrates into standard turning systems where compatibility depends on shape, clearance angle, tolerance class, clamping and thickness. The insert’s 7° clearance angle and 2.38 mm plate thickness meet common holder requirements, and the cylindrical hole with single‑side chamfer (40°–60°) ensures positive seating and repeatable positioning. The system build comprises the indexable insert, a matching external holder or boring bar, plus the necessary shim/clamping set and replacement screws; this arrangement simplifies tool changeovers and maintains concentricity during operation. Recommended applications and chip control for stable results Designed primarily for external and internal turning, the single‑sided chipbreaker is well suited to steady cutting conditions and work hardening steels where a superior surface finish is prioritised. The rhombic 07 size and the insert’s geometry support both finishing and light universal cuts; select the appropriate chipbreaker and grade according to the material and machine rigidity to achieve the best balance between surface quality and tool life. For manual set‑up and CNC turning alike, the insert provides consistent chip formation and reduces the need for rework, supporting higher first‑pass quality rates. Contact Metav Werkzeuge for a tailored recommendation on the Tungaloy GT9530 grade or to arrange technical matching of the DCGT070202 insert to your holders and machining parameters Technical data Article number: 6997867 Manufacturer SKU: TUN6997867 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Grade: GT9530 Facts Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: 2.38 mm Size: 07 Included angle / form angle: 55° Special features Rhombic plate form Single‑sided chipbreaker Cylindrical hole with one‑side chamfer (40°–60°) Coated cermet grade for wear resistance ISO‑standardised geometry for holder compatibility System components: matching external holder or boring bar; shim/clamping set; replacement screws FAQ What materials is this insert best suited for? The GT9530 coated cermet grade is optimised for steel machining, providing wear resistance and a fine surface finish during finishing and light universal turning. Is the insert compatible with standard ISO holders? Compatibility is ensured by the ISO‑compliant rhombic form and the specified dimensions; the 7° clearance angle and 2.38 mm thickness should be matched to the holder’s form, tolerance class and clamping design. How does the chipbreaker influence performance? The single‑sided chipbreaker promotes controlled chip formation under stable cutting conditions, aiding surface quality and reducing the likelihood of built‑up edge on finishing passes. What geometry specifics aid finishing? A 0.2 mm corner radius and the insert’s coated cermet composition support precise surface generation and improved edge stability for fine finishing operations. Can the insert be used for internal turning? Yes; the insert’s geometry and rhombic 07 format allow use in both external and internal turning applications when paired with an appropriate boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070202 J740 Wendeplatten - Tungaloy
The combination of the Tungaloy J740 grade and the 0.2 mm corner radius delivers a balanced mix of wear resistance and edge stability for productive turning. Order the insert directly via Metav Werkzeuge or ask our consultants for a tailored recommendation. DCGT 070202 J740 – Indexable insert for turning (Tungaloy) DCGT070202 J740 is an ISO-standard rhombic indexable insert for external and internal turning applications, optimised for stable chip formation and long tool life. ISO-standard rhombic insert Tungaloy J740 carbide grade 0.2 mm corner radius 7° relief angle Greater productivity through matched grade and geometry The combination of the Tungaloy J740 grade and the rhombic insert geometry enables efficient machining with reliable wear behaviour and edge stability. The carbide composition provides the hardness required for continuous cutting, while the grade’s balance of toughness and wear resistance reduces the risk of premature chipping. For many turning tasks this results in higher material removal rates and fewer indexings, which supports a more consistent production flow. Secure clamping and straightforward holder compatibility Compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening, size and thickness; the DCGT070202 conforms to ISO dimensions, simplifying selection of a matching external holder or boring bar. The insert’s cylindrical hole with one-sided countersink (40°–60°) and standard thickness allow secure clamping with common shims and screws, ensuring repeatable seating and stable cutting conditions that reduce vibration and improve surface finish. Application guidance and material suitability Select the one-sided chipbreaker and the J740 grade according to the workpiece material and the machining stability required; the insert is intended for general turning of a wide range of materials where a balance of wear resistance and toughness is beneficial. The spec sheet—including the 7° relief angle, 55° cutting edge angle and 0.2 mm corner radius—helps set cutting parameters and predict tool life. When high speeds or specific workpiece alloys are involved, pairing the insert with an appropriate holder and optimised cutting data will yield the best results. Contact Metav Werkzeuge for availability and application advice on Tungaloy DCGT070202 J740 inserts; our technical team can assist with holder matching and cutting data — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6802783 Manufacturer SKU: TUN6802783 Product SKU: 6802783-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts ISO code: 070202 Designation: DCGT070202 Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 55° Plate thickness: 2.38 mm Size: 07 Special features Grade: J740 (Tungaloy) One-sided chipbreaker Cylindrical hole with one-sided countersink 40°–60° Rhombic insert form For external and internal turning Compatible with appropriate holder, shim and screws FAQ What materials is this insert suited for? The DCGT070202 J740 insert is designed for a broad materials spectrum; the Tungaloy J740 grade combines wear resistance and toughness to handle many common turning tasks. How does the 0.2 mm corner radius affect cutting? A 0.2 mm corner radius balances edge strength and detail; it improves edge life compared with smaller radii while still permitting relatively fine dimensional control in turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle and tolerance; the ISO designation and the cylindrical hole with countersink enable use with standard external holders and boring bars that accept DCGT inserts. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker stabilises chip flow for specific cutting directions and materials, reducing built-up edge and improving surface finish when the insert is used under appropriate cutting conditions. How often should the insert be indexed or replaced? Indexing frequency depends on workpiece material, cutting data and operating stability; the J740 grade is specified to extend service intervals through its balanced wear and toughness properties. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 J740 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, J740 carbide wear resistance, and precise clamping features for predictable turning performance; order the insert directly via Metav Werkzeuge or request guidance from their consultants for optimal holder pairing. DCGT 070202 J740 — ISO turning insert for turning by Tungaloy DCGT 070202 J740 is an ISO‑normed rhombic indexable turning insert designed for general turning applications where secure clamping, consistent edge stability and reliable chip control are required ISO indexable format DCGT 070202 J740 Carbide grade J740 for balanced durability 7° clearance angle for stable cutting geometry Cylindrical hole with countersink for firm clamping Precision and consistency for repeatable turning The DCGT070202 J740 Tungaloy indexable insert combines ISO conformity with a rhombic geometry and a 55° approach angle to deliver consistent chip engagement and predictable forces during external and internal turning. Constructed from carbide, the grade J740 balances wear resistance and toughness, supporting longer tool life where intermittent cuts or variable stability occur. Because compatibility depends on form, clearance, tolerance class, fastening, size and thickness, this ISO reference simplifies selection and reduces setup uncertainty when matching to standard external holders and boring bars. Faster setups and improved process stability A secure clamping interface is provided by the cylindrical hole with one-sided countersink (40°–60°); combined with the insert’s 2.38 mm thickness and 0.2 mm corner radius, this yields repeatable seated position and reliable edge support. The single‑sided chipbreaker promotes controlled chip formation on the intended cutting side, reducing risk of entanglement and easing evacuation in continuous turning cycles. These measurable characteristics help shorten changeover time and improve cycle consistency, contributing directly to throughput and lower scrap rates. Flexible choice for varied machining demands Presented as part of an ISO insert system, the rhombic shape and moderate clearance (7°) make this turning insert adaptable to a range of holder geometries and workpiece stabilities. The grade selection and chipbreaker type allow process engineers to tailor the cutting edge balance according to specific workpiece materials and machining strategies. Where higher cutting speeds or different materials are required, the insert’s standard designation and grade make it straightforward to select alternate chipbreaker geometries or complementary grades without changing the clamping system. Contact Metav Werkzeuge for tailored recommendations on holders, to confirm compatibility with existing tool setups, or to procure original Tungaloy DCGT 070202 J740 inserts for reliable, productive turning operations Technical data Article number: 6802784 Manufacturer SKU: TUN6802784 SKU: 6802784-Tungaloy Model series: ISO indexable turning inserts Product designation: DCGT070202 J740 Tungaloy indexable insert Facts Corner radius: 0.2 mm Thickness: 2.38 mm Insert size: 07 Clearance angle: 7° Approach angle: 55° Special features Material: carbide Grade: J740 (Tungaloy) Chipbreaker: single-sided Hole: cylindrical with one-sided countersink (40°–60°) Shape: rhombic FAQ Which machining tasks suit this insert best? The DCGT 070202 J740 indexable insert is intended for turning operations, both external and internal, where a balance of wear resistance and edge stability is required. How is the insert secured in the holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) and is clamped in ISO‑compatible external holders or boring bars; secure seating depends on correct holder form and tolerance class. What are the key dimensions to check for compatibility? Important values are the thickness (2.38 mm), corner radius (0.2 mm), insert size (07) and clearance angle (7°); these determine fit and cutting geometry. What benefit does the J740 grade provide? The J740 grade from Tungaloy offers a compromise of wear resistance and toughness, helping to maintain cutting edge integrity and consistent performance in varied turning conditions. Is the chip control suitable for continuous turning? Yes, the single‑sided chipbreaker on this insert is designed to produce consistent chips for many continuous turning applications, improving evacuation and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 J740 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry, the J740 Tungaloy carbide grade and the secure cylindrical fixing for repeatable, process‑stable turning; order the DCGT 070202 J740 insert directly via Metav Werkzeuge or ask the consultants for assistance. DCGT 070202 J740 — ISO rhombic turning insert, 7° relief (Tungaloy) A DCGT 070202 J740 insert engineered for general external and internal turning operations with ISO compatibility and a balanced grade for wear resistance and edge stability. ISO‑standard rhombic insert size 07 J740 carbide grade for wear resistance 7° relief angle for defined cutting edge Cylindrical hole with countersink for secure fixing Improved productivity through matched geometry and grade The combination of an ISO‑compliant rhombic 07 geometry and the J740 carbide grade delivers a reliable foundation for efficient turning. The plate’s moderate corner radius (0.2 mm) and defined 7° relief enable stable engagement with the workpiece, which helps to maintain consistent cutting forces. Because the grade is formulated to balance wear resistance and toughness, edge life is extended under many routine turning conditions; this reduces unplanned tool changes and supports higher machine utilisation. Secure mounting and clear holder compatibility Mounting security is provided by the cylindrical hole with a one‑sided countersink (40°–60°), ensuring a positive clamping interface when used with the appropriate ISO holders. Compatibility with a given holder is determined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness; these parameters are standardised to simplify selection. As a result, the insert can be integrated into existing tool systems with predictable positioning and repeatable indexing. Controlled chip formation and edge stability for consistent surfaces The single‑sided chipbreaker geometry helps to direct chips away from the cutting zone and to condition the chip shape for safer evacuation. This contributes to improved surface finish and reduces the risk of re‑cutting chips on the component. The J740 grade complements the mechanical geometry by providing edge stability under varying loads, so process reliability is increased and workpiece quality remains consistent across batches. Practical handling, specification and recommended uses The insert’s 2.38 mm thickness and 07 size suit a broad range of external and internal turning duties where a compact rhombic geometry is preferred. The plate is supplied as an ISO turning indexable insert, enabling straightforward inventory management and rapid replacement. When selecting this insert for a specific task, match the single‑sided chipbreaker and the J740 grade to the material and cutting conditions required; this matching ensures optimal performance without unnecessary complexity. For process‑secure turning with the Tungaloy J740 grade, contact Metav Werkzeuge for availability and tailored advice — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802787 Manufacturer SKU: TUN6802787 Name: DCGT070202 J740 Tungaloy insert Model series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.2 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 55° Plate size: 07 Special features Grade: J740 (Tungaloy) Shape: rhombic Chipbreaker: single‑sided Hole: cylindrical hole with one‑sided countersink (40°–60°) Application: turning Compatibility: ISO holder compatibility by form, relief angle, tolerance, fastening, size and thickness FAQ What applications is this insert intended for? The DCGT070202 J740 is designed for external and internal turning tasks where a rhombic 07 insert and a moderate corner radius offer the right balance between access and edge strength. How is the insert fixed in the holder? Fixing is achieved via the cylindrical hole with a one‑sided countersink (40°–60°); the DCGT070202 J740 is compatible with ISO holders that match the form, relief angle, tolerance class, fastening method, size and thickness. What does the J740 grade offer? The J740 grade combines wear resistance, toughness and cutting‑edge stability to deliver repeatable performance and extended edge life under a variety of turning conditions. Which chip control features are integrated? A single‑sided chipbreaker is integrated to favour controlled chip formation and safer evacuation, supporting improved surface quality and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070202 J9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, J9530 Tungaloy carbide grade and secure clamping for predictable chip control and consistent component quality; order directly via Metav Werkzeuge or ask the consultants for application advice. DCGT070202 J9530 Tungaloy indexable turning insert — rhombic, R0.2, 7° clearance The DCGT070202 J9530 Tungaloy is an ISO-standard rhombic insert designed for general external and internal turning where reliable edge stability and balanced wear resistance are required. ISO rhombic insert DCGT070202 J9530 grade: wear-resistant and tough Single-sided chipbreaker for reliable chips 7° clearance; 55° included angle Predictable production through ISO-standard geometry The ISO-standard rhombic shape provides consistent seating and repeatable orientation, which reduces setup time and simplifies inventory management. Compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening method, size and thickness, so adoption of ISO plates ensures fast changeover and lower process variability. For production environments, the measurable fit and standardised geometry mean less rework, quicker insertion changes and stable mean time between interventions. Material grade engineered for mixed machining applications The substrate is cemented carbide and the cutting grade J9530 complements the plate geometry by balancing wear resistance with sufficient toughness and edge stability. This combination is aimed at turning operations where abrasive wear and intermittent cutting conditions occur; the grade helps maintain cutting-edge integrity while extending effective tool life. The result is fewer indexings per component and more predictable batch output in both hard and less demanding steels. Controlled chips and robust cutting geometry for improved surface finish A single-sided chipbreaker matched to the insert geometry promotes controlled chip evacuation and reduces the risk of entanglement, improving surface quality and machine uptime. The 7° clearance angle and the 0.2 mm corner radius contribute to reduced cutting forces at the edge, while a plate thickness of 2.38 mm increases bending stiffness under load. Secure clamping is supported by a cylindrical hole with a one-sided countersink (40°–60°), ensuring stable fixation and repeatable cutting performance. System-level benefits for workshop efficiency and process stability This insert integrates into a simple system: the ISO plate paired with a compatible outer holder or boring bar, a shim/clamping set and spare screws. The standardised format supports quick replacements and consistent set-up dimensions across machines, which is particularly valuable for job shops and series production alike. With system compatibility and a clear specification (DCGT070202, J9530), procurement and maintenance planning are simplified, helping to improve overall throughput and reduce production variability. For tailored application guidance or to reserve the Tungaloy DCGT070202 (SKU TUN6723932), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and availability Technical data Article number: 6723932 SKU: 6723932-Tungaloy Manufacturer SKU: TUN6723932 Model series: ISO indexable turning inserts Product designation: DCGT070202 J9530 Tungaloy insert Facts Plate size: 07 Plate thickness: 2.38 mm Corner radius: R0.2 mm Clearance angle: 7° Included angle: 55° Special features Material: cemented carbide Grade: J9530 (Tungaloy) Shape: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ What operations is this insert intended for? The DCGT070202 J9530 Tungaloy indexable turning insert is intended for external and internal turning applications where a balance of wear resistance and toughness is required. How does the J9530 grade affect tool life and edge stability? The J9530 grade provides a combination of wear resistance and toughness that supports longer edge life and stable cutting behaviour, reducing the frequency of indexings for the Tungaloy DCGT070202 insert. Which holder and clamping features are required for secure use? Secure use requires a compatible ISO rhombic holder shaped for DCGT plates, a suitable shim/clamping set and the correct screw; the insert’s cylindrical hole with a one-sided countersink ensures reliable fixation. What chip behaviour can be expected with this insert? The single-sided chipbreaker is designed for controlled chip formation and evacuation, improving surface finish and decreasing the likelihood of chip-related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 J9530 Wendeplatten - Tungaloy
Combine ISO-conform geometry, the J9530 Tungaloy grade and robust cemented carbide construction for dependable turning performance and predictable tool life. The rhombic 55° form and 2.38 mm plate thickness ensure stable clamping and compatibility with ISO holders. Order via Metav Werkzeuge or consult our application specialists for machining guidance. DCGT 070202 J9530 turning insert (Tungaloy) — rhombic 55° indexable insert A DCGT 070202 J9530 indexable turning insert designed for ISO-compatible external and internal turning, offering a balanced combination of wear resistance and cutting-edge toughness. ISO-form DCGT 070202 compatible J9530 Tungaloy grade for wear resistance Rhombic insert with 55° cutting angle Single-sided chipbreaker, cylindrical hole Consistent ISO compatibility reduces set-up risk The insert follows the ISO geometry for the DCGT family, which simplifies holder selection and reduces time spent on trial adjustments. Its standardised form and tolerance class mean repeatable seating in compatible external holders or boring bars, so changeovers are quicker and tool life can be monitored more reliably. Designed for turning operations, the geometry supports both external and internal passes while the single-sided chipbreaker helps direct chips consistently for improved process stability. J9530 grade for a balanced mix of wear resistance and toughness The J9530 Tungaloy grade combines enhanced wear resistance with sufficient toughness to withstand interrupted cuts and variable stability conditions. This balance reduces flank wear and mitigates corner chipping when machining under industrial conditions. For production environments where both durability and predictable edge behaviour matter, the grade minimises unplanned downtime and contributes to a more economical machining cycle by extending the interval between edge changes. Mechanical design that supports secure clamping and repeatability The rhombic plate shape and the 55° cutting angle deliver a versatile cutting geometry suitable for general turning tasks. A cylindrical hole with single-side countersink (40°–60°) provides secure axial and radial clamping while the 0.2 mm corner radius preserves edge strength on finishing and light roughing passes. At a plate thickness of 2.38 mm, the insert gives sufficient body stiffness for consistent performance in typical toolholder systems and helps maintain repeatable tool offsets across tool changes. Practical selection and application advice for reliable results Choose a chipbreaker and grade that match the workpiece material, feed and depth of cut; the chipbreaker here is single-sided and intended for standard turning strategies. When paired with a suitable ISO-compatible holder and correct cutting data, this insert supports efficient material removal and predictable surface quality. For variable part geometries, the combination of grade and geometry reduces the need for frequent tool adjustments and helps achieve stable cycle times in batch or single-piece production. For application-specific recommendations on the Tungaloy J9530 turning inserts, contact Metav Werkzeuge for availability and machining advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930; our specialists will assist with holder compatibility and process optimisation. Technical data Article number: 6730405 Manufacturer SKU: TUN6730405 SKU: 6730405-Tungaloy Facts Plate designation: DCGT070202 ISO code: 070202 Plate size: 07 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 55° Special features Material: cemented carbide Grade: J9530 (Tungaloy) Plate shape: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ What materials is this insert intended for? The DCGT 070202 J9530 turning insert is manufactured from cemented carbide with a versatile Tungaloy grade; select a matching chipbreaker and cutting data appropriate to the workpiece material for best results. How does the ISO form affect holder compatibility? ISO-conform DCGT geometry ensures the insert seats in standard DCGT holders and boring bars; the dimensional conformity reduces set-up variability and supports repeatable clamping. What cutting conditions suit the J9530 grade best? The J9530 grade is balanced for wear resistance and toughness, making it suitable for a range of turning operations including light to medium roughing and finishing where interrupted cuts may occur. Is the insert reversible and how many cutting edges are usable? This rhombic, single-sided design provides a defined number of usable cutting edges according to the plate geometry; check the DCGT070202 indexing scheme for exact edge count and rotation method. Which holder features are recommended for secure clamping? Use an ISO-compatible holder with a secure top clamp or screw fastening that matches the plate's hole and countersink geometry to achieve repeatable clamping and stable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 KS05F Wendeplatten - Tungaloy
Benefit from the wear-resistant KS05F grade, robust carbide construction and ISO‑standard form for consistent turning performance; the rhombic geometry and 0.2 mm corner radius support precise finishing and reliable chip control. Order the DCGT070202 KS05F Tungaloy insert directly via Metav Werkzeuge or consult our advisers for application recommendations. DCGT070202 KS05F turning insert, rhombic 07, 7° clearance — Tungaloy A DCGT070202 KS05F turning insert engineered for external and internal turning, offering a rhombic shape, 7° clearance and a one-sided chipbreaker for controlled material removal *ISO rhombic insert DCGT070202 KS05F *Tungaloy carbide KS05F grade *7° clearance and 55° approach angle *0.2 mm corner radius; one-sided chipbreaker Consistent cutting performance for productive turning The KS05F grade, paired with a carbide substrate, delivers a balance of wear resistance and edge stability that extends tool life and reduces downtime. Designed as an ISO‑standard insert, it provides repeatable results across compatible holders: the established geometry and tolerance class minimise variation between indexings. This reliability translates into fewer interruptions for tool changes and predictable cycle times on the shop floor, improving overall process efficiency. Precision fit and secure mounting for repeatable accuracy Compatibility to the toolholder is governed by form, relief angle, tolerance class, fastening, size and thickness. The rhombic plate, 2.38 mm thick, features a cylindrical hole with a single‑sided countersink (40°–60°) that ensures secure clamping and correct seat location. The 55° lead angle and 7° clearance reduce cutting forces in many turning setups, while the 0.2 mm corner radius supports a fine surface finish with low chatter. Clear mechanical interfaces make the insert suitable for standard ISO indexable systems. Geometry options that support adaptable machining strategies A one‑sided chipbreaker simplifies chip control for varying cutting conditions; selecting the right chipbreaker and grade is critical for the workpiece, machining type and machine rigidity. For light finishing and intermittent cuts the small 0.2 mm corner radius helps preserve dimensional accuracy and surface quality. For heavier stock removal, pairing the KS05F grade with a more robust geometry and a stable clamping arrangement increases reliability. The result is predictable tool behaviour and repeatable component quality with reduced scrap. For enhanced process security with the KS05F carbide grade from Tungaloy, contact Metav Werkzeuge for tailored recommendations and availability. Technical data Article number: 6843410 Manufacturer SKU: TUN6843410 Model series: ISO turning inserts Material: carbide Facts Corner radius: 0.2 mm Plate thickness: 2.38 mm Size: 07 Approach/lead angle: 55° Relief/clearance angle: 7° Special features Grade: KS05F (Tungaloy) Chipbreaker: one-sided Hole: with hole — cylindrical hole + single‑sided countersink (40°–60°) Shape: rhombic Application: turning FAQ What turning operations is this insert suited for? The DCGT070202 KS05F insert is designed for both external and internal turning; the rhombic form and one‑sided chipbreaker make it suitable for finishing and general turning tasks. How is the insert secured to the holder? The insert uses a cylindrical centre hole with a single‑sided countersink (40°–60°) that matches indexed holders and clamping sets for secure, repeatable mounting. Which workpiece materials are appropriate for the KS05F grade? The KS05F Tungaloy grade balances wear resistance and toughness; select the chipbreaker and geometry according to material, cut type and machine stability to achieve optimal results. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius promotes fine surface quality and dimensional control during finishing passes while reducing the risk of tool edge damage in light interrupted cuts. What is the manufacturer item number and SKU? Manufacturer item number 6843410; SKU 6843410-Tungaloy identifies the DCGT070202 KS05F insert within the Tungaloy portfolio. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-quality finishing, proven ISO compatibility and secure mounting for a continuous, productive turning process; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCGT 070202 NS9530 turning insert — finishing for steel, Tungaloy The DCGT070202 NS9530 is an ISO‑standard rhombic turning insert designed for finishing operations on steel, offering a geometry and chip control suitable for continuous cuts and small depths of cut. Finishing cermet grade NS9530 for low cutting forces ISO rhombic DCGT geometry for stable cutting Single-sided chipbreaker, suitable for continuous cuts Countersunk hole for secure mounting High-precision finishing for demanding turning The insert combines a finishing cermet (NS9530) with an optimised edge form to deliver low cutting forces and an excellent surface finish when turning steel. The material choice and sharp cutting edge make it particularly effective in continuous machining and light-oversize passes where surface quality is the priority. The design reduces vibration at the cut, which contributes to reproducible part quality and less downstream finishing work. The result is higher first-pass yields and a measurable reduction in rework effort. Designed for reliable holder compatibility and secure mounting Constructed to ISO norms, the rhombic geometry and the specified 7° clearance ensure compatibility with a wide range of ISO external toolholders. The plate features a 0.2 mm corner radius and a countersunk hole with a cylindrical bore plus a single-sided countersink (40°–60°), enabling secure clamping and repeatable positioning in the clamping assembly. These elements support tool‑setter calibration and reduce indexing time, helping to maintain stable cutting conditions and predictable tool life. Application guidance and machining benefits For finishing tasks on steel, the single-sided chipbreaker paired with the uncoated cermet grade NS9530 excels at producing fine surface textures at small cutting depths. The 2.38 mm plate thickness provides sufficient rigidity for light to moderate finishing cuts while keeping insert mass low for rapid tool changes. Selecting this insert within an ISO system simplifies inventory management and reduces tool preparation time. The combination of stable chip control and a sharp edge results in consistent part tolerances and improved process efficiency. For application support or to order the Tungaloy DCGT 070202 NS9530 turning insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical consultation and stock information Technical data Article number: 6998047 Manufacturer SKU: TUN6998047 SKU: 6998047-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DCGT070202 Numbers / Core technical data Plate size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle (clearance): 7° Included angle: 55° Designs / Special features Rhombic plate form (DCGT) Uncoated cermet grade NS9530, finishing sort Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Compatible with ISO external holders Intended application: turning (finishing steel) FAQ What machining tasks is this insert suited for? The DCGT 070202 NS9530 Tungaloy turning insert is designed primarily for finishing operations on steel, providing low cutting forces and improved surface quality for continuous cuts and small depths of cut. Which holders are compatible with this insert? Compatibility is determined by ISO form, relief angle, tolerance class, fastening method, size and thickness; the DCGT 070202 follows ISO norms and fits ISO rhombic external holders designed for size 07 inserts. What are the key geometric values affecting machining? Important values for this insert are the 0.2 mm corner radius, 7° clearance angle and 2.38 mm plate thickness, which together influence rigidity, edge strength and surface finish in finishing cuts. Does the insert include a chipbreaker for chip control? Yes, the insert features a single-sided chipbreaker optimised for continuous cutting, improving chip control during finishing operations. What is the article number and manufacturer SKU for ordering? The article number is 6998047 and the manufacturer SKU is TUN6998047 for the Tungaloy DCGT 070202 NS9530 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the supplied information names "Hartmetall" as the base substrate while elsewhere the cutting material is described as an uncoated cermet grade NS9530. These two substrate types are distinct and cannot both accurately describe the same insert. Because of this contradiction, a reliable, production-ready product description cannot be generated from the current data set. Please clarify whether the component is an uncoated cermet (NS9530), optimised for fine finishing on steel and continuous cuts, or a cemented carbide variant. Once the correct substrate classification and consistent material data are provided, a complete technical copy with machining guidance, compatibility notes and manufacturer details will be produced.
DCGT 070202 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product contains conflicting information about the cutting material — one entry specifies Hartmetall (carbide) while another specifies an uncoated cermet grade (NS9530). This discrepancy raises concerns about the accuracy of the technical specifications provided, which are essential for ensuring the product meets the required performance standards and customer expectations. To resolve this issue, it is crucial to clarify whether the cutting material is indeed Hartmetall (carbide) or the uncoated cermet grade (NS9530), as this will impact the product's application, durability, and suitability for specific tasks. Please provide corrected or reconciled technical data so a complete, accurate product description can be produced.
DCGT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade solution that combines a sharp uncoated cermet cutting edge with a rhombic ISO geometry to deliver low cutting forces and superior surface finish in continuous turning operations; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DCGT 070202 NS9530 ISO turning insert – finishing grade by Tungaloy DCGT 070202 NS9530 is a rhombic ISO turning insert engineered for precision external and internal turning, optimised for finishing steel components. Sharp cermet grade NS9530 for fine finishing Rhombic 07 form with 55° cutting angle 0.2 mm corner radius for precise contours Cylindrical hole with 40°–60° countersink Superior surface finish with low cutting forces The uncoated cermet NS9530 is specified for finishing of steel where a sharp cutting edge and low cutting forces are decisive. The combination of a fine-grain ceramic phase with metallic bonding gives a stable edge that produces a superior surface finish on continuous cuts and small depth passes. For shops aiming to reduce secondary operations, this insert reduces the need for additional polishing while maintaining consistent dimensional control. Predictable geometry for repeatable turning results The rhombic 07 form and a 55° main angle deliver a controlled cutting direction that supports accurate profiles and minimises chatter when paired with appropriate tooling and stable setups. A 0.2 mm corner radius balances edge strength and form fidelity for detailed contours, while the 7° clearance helps reduce rubbing on shoulder faces. These geometric details translate into repeatable part quality and lower scrap rates during finishing cycles. Clear mounting and chip control for efficient processes Designed as an ISO turning insert, compatibility with holders is determined by form, clearance, tolerance class, fastening, size and thickness; the insert includes a cylindrical hole with one-sided countersink (40°–60°) for secure clamping and precise location. The single-sided chipbreaker manages chip formation for continuous operations, reducing re-cutting and improving cycle stability. The solid substrate—manufactured from cemented carbide—ensures mechanical strength under finish-cut conditions. Application focus and process benefits Intended primarily for turning steel in finishing applications, the insert supports small depths of cut and continuous feed profiles where high surface quality is required. With a plate thickness of 2.38 mm and standard ISO sizing, the component integrates into existing tool systems with minimal adaptation. Choosing this grade helps shops achieve consistent component finish, reduced secondary work and reliable edge behaviour under steady-state feeds. For tailored process advice or to procure the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge for application support and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997923 Manufacturer SKU: TUN6997923 SKU: 6997923-Tungaloy Model series: ISO turning inserts Manufacturer: Tungaloy Core numerical data Cutting angle: 55° Clearance angle: 7° Thickness: 2.38 mm Size: 07 Corner radius: 0.2 mm Design and features Material: cemented carbide Grade/coating: uncoated cermet NS9530 Shape: rhombic insert (DCGT) Chipformer: single-sided chipbreaker Hole style: cylindrical hole + one-sided countersink (40°–60°) Intended application: turning, finishing of steel Suitable for: continuous cut and small depth passes Compatibility: ISO-standard holders (form, clearance, tolerance class, fastening, size, thickness) FAQ What materials is this insert suited for? The DCGT 070202 NS9530 insert is formulated for finishing steel; the NS9530 uncoated cermet grade provides a sharp edge and good results on continuous cuts. How is the insert secured in the holder? Clamping is via the cylindrical hole with a one-sided countersink (40°–60°); this design ensures reliable location and stable fastening in ISO-compatible holders. What cutting geometry helps achieve the surface finish? The rhombic 07 form with a 55° main cutting angle combined with a 0.2 mm corner radius produces a controlled cutting action that supports high-quality surface finishes. Is this insert suitable for internal and external turning? Yes; the geometry and chip control make the insert appropriate for both external and internal turning operations where finishing performance is required. Can the insert handle interrupted cuts or roughing passes? The DCGT 070202 NS9530 is a finishing-grade insert optimised for continuous cuts and small depths; for heavy interrupted cuts or heavy roughing, a more robust grade is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 NS9530 Wendeplatten - Tungaloy
Conflicting product information detected: the data lists the item both as carbide and as an uncoated cermet cutting material, which creates uncertainty regarding the precise classification of the material in question. This discrepancy could lead to potential misunderstandings or errors in product application, selection, or performance evaluation. Please verify the specification with the relevant technical documentation or consult the manufacturer to ensure accuracy and consistency before a full product description can be generated, as this step is crucial for providing clear, reliable, and precise information to end-users or customers who rely on accurate data for their decision-making processes.
DCGT 070202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable carbide grade and precise ISO geometry for predictable machining and reduced tool changeover. The robust chip control and small corner radius deliver consistent surface finish in external and internal turning. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for selection support. DCGT070202 SH7025 Tungaloy insert — ISO turning insert with rhombic 55° geometry The DCGT070202 SH7025 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning where stable cutting edges and reliable chip control are required Coated carbide grade SH7025 Rhombic 55° geometry 0.2 mm corner radius Cylindrical hole with single‑side countersink Predictable cutting performance from a tough, coated grade The combination of a coated carbide substrate and the SH7025 grade provides a balance of toughness and edge stability that suits intermittent cuts and small‑tool applications. This results in lower risk of chipping during variable engagement and helps maintain consistent dimensional accuracy. The moderate coating enhances wear resistance without sacrificing the substrate’s ability to resist mechanical shock, supporting longer productive life under typical turning conditions. Seamless integration with ISO toolholders for reduced setup time Designed as an ISO turning insert, compatibility with holders is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s rhombic 55° geometry, 7° clearance angle and 2.38 mm thickness make it straightforward to match with common external holders and boring bars; the standardised footprint speeds up tool changes and inventory management. This standard conformity allows shops to integrate the insert into existing toolsets without custom adapters, promoting process efficiency. Improved surface quality and chip control for turning tasks A 0.2 mm corner radius and a single‑sided chipbreaker combine to deliver controlled chip formation and a stable cutting edge—beneficial for achieving repeatable surface finishes in both external and internal turning. The insert’s hole design (cylindrical hole with a one‑sided countersink at 40°–60°) ensures secure clamping and accurate seating, which contributes to vibration dampening and consistent results. If further guidance is required on chipbreaker selection or material pairing, Metav Werkzeuge’s technical advisors can assist with tailored recommendations. For original Tungaloy tooling and application support, contact Metav Werkzeuge for prompt supply and expert advice on optimal insert selection and holder compatibility. Technical Data Article number: 7743496 SKU: 7743496-Tungaloy Manufacturer SKU: TUN7743496 Model series: ISO turning inserts Material: carbide Grade/coating: SH7025 Core technical data Insert designation: DCGT070202 Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Geometry included angle: 55° Special features Rhombic insert form Cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker ISO‑standard format for external and internal turning FAQ What turning operations is this insert suitable for? The DCGT070202 SH7025 insert is specified for both external and internal turning where a tough, edge‑stable grade is needed; it performs well in applications with varying engagement. How does the SH7025 grade help in production? SH7025 is a coated, tough carbide grade engineered for edge stability; it reduces the likelihood of chipping under intermittent cuts and supports predictable tool life for turning tasks. Which holders fit this ISO insert? ISO‑standard holders that accept rhombic DCGT inserts with size 07 and a 2.38 mm thickness are compatible; compatibility depends on form, clearance angle, tolerance, fastening and thickness. What chip control can be expected from this insert? The single‑sided chipbreaker combined with a 0.2 mm corner radius offers controlled chip formation and improved surface finish in typical turning cycles. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated cemented carbide grade SH7025, a stable 55° cutting geometry, and simple holder compatibility for reliable turning performance; order the DCGT070202 SH7025 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT070202 SH7025 DCGT indexable insert for turning — Tungaloy A Tungaloy DCGT070202 SH7025 indexable insert designed for general-purpose external and internal turning, engineered for stable cutting edges in small-tool applications. Coated carbide grade SH7025 for edge stability Rhombic 07 form with 55° cutting angle Cylindrical hole with 40°–60° single-sided countersink Single-sided chipbreaker, corner radius 0.2 mm Stable cutting performance for economical machining The coated cemented carbide composition in this grade delivers a stable cutting edge that copes well with changing engagement conditions. The SH7025 grade is specified for applications where edge robustness and predictable wear behaviour are priorities, which reduces unplanned tool changes and supports continuous production. By choosing a coated insert with a consistent chip formation property, process reliability and tool life are improved, creating measurable savings in setup time and maintenance effort. Precisely defined geometry for consistent results The insert’s rhombic 07 geometry with a 55° cutting angle and corner radius 0.2 mm provides a predictable cut profile and helps control surface finish on both external and internal turning operations. The 7° clearance prevents rubbing at the flank and the 2.38 mm thickness contributes to mechanical stiffness when clamped. The cylindrical hole with one-sided countersink (40°–60°) ensures secure fastening in compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening type, size and thickness of the insert. Choosing the correct holder and shim set avoids unstable clamping and supports repeatable machining accuracy. Adaptable chip control and application scope Equipped with a single-sided chipbreaker, this insert is intended for general turning tasks where controlled chip flow reduces rework and improves cycle time. The series is used for both external and internal turning; the appropriate chipbreaker and grade selection should be matched to the workpiece material and the stability of the setup. The insert’s design is particularly suitable for smaller tools or operations with varying depths of cut, where edge strength and predictable chip behaviour are required to maintain process security. System approach and operational benefits Integration into the machining system is straightforward: an ISO-standard turning insert combined with a suitable external holder or boring bar, plus an underlay/locking set and replacement screws, creates a robust cutting arrangement. The standardised form and ISO designation facilitate quick replacement and inventory management. Overall, the geometry and coating of this insert aim to reduce downtime, deliver consistent surface quality and support efficient production cycles, making it a cost-effective option for workshops seeking dependable turning performance. Contact Metav Werkzeuge for tailored advice on the Tungaloy DCGT070202 SH7025 indexable insert, compatibility with specific holders and recommendations for optimal machining parameters — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6967469 Manufacturer SKU: TUN6967469 SKU: 6967469-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide ISO designation: 070202 Article name: DCGT070202 SH7025 Tungaloy indexable insert Facts Plate size: 07 Plate form: rhombic Plate thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 55° Special features Coated cemented carbide grade SH7025 Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Suitable for external and internal turning ISO-standard insert; compatibility determined by form, angle, tolerance, fastening, size and thickness FAQ Is this insert suitable for internal turning operations? Yes. The DCGT070202 SH7025 indexable insert is designed for both external and internal turning where the rhombic 07 form and 55° cutting angle meet the holder and workpiece requirements. What does the SH7025 grade mean for tool life? The SH7025 grade denotes a coated carbide composition optimised for edge stability, giving the insert predictable wear behaviour and extended usable life under varying engagement conditions. How should the insert be fixed to the holder? Fixing requires a compatible ISO holder that matches the insert’s form, clearance angle, tolerance class, fastening type, size and thickness; the insert’s cylindrical hole with single-sided countersink ensures secure clamping when the correct screws and underlay are used. Which corner radius is available and what is its effect? The insert has a corner radius of 0.2 mm, which supports fine profile control and is suitable for light to medium finishing passes where surface quality and dimensional accuracy are required. Can this insert handle unstable cutting conditions? The SH7025 grade and robust geometry make the insert resilient in variable engagement conditions; however, stability also depends on tool overhang, holder rigidity and machine conditions, so matching fixture and parameters is advised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 SH7025 Wendeplatten - Tungaloy
High-performance SH7025 coated carbide combines stable cutting-edge behaviour with long tool life, while the ISO rhombic geometry and 7° clearance angle ensure reliable seating and consistent finishes in turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT 070202 SH7025 Tungaloy Turning Insert (rhombic, 7° clearance) A DCGT070202 SH7025 ISO rhombic turning insert engineered for external and internal turning, offering edge stability in variable engagement conditions Coated carbide grade SH7025 for edge stability ISO rhombic insert, size 07, 7° clearance 0.2 mm corner radius for fine finishing Single-sided chipbreaker with central hole Precision where stability matters for uninterrupted production The SH7025 coated carbide grade delivers a balance of toughness and wear resistance that supports stable edge life under changing cutting conditions. Designed for productive turning, the geometry reduces unexpected tool changeovers and helps maintain cycle times. By choosing a hardened, coated grade, operators benefit from predictable wear behaviour and improved process reliability, which in turn supports higher overall productivity on mixed-batch or small-batch runs. Easy integration with ISO clamping systems to reduce setup time Supplied as an ISO-standard rhombic insert in size 07 with a 7° clearance and a central hole with a one-sided countersink, the insert is compatible with a wide range of holders when form, clearance, tolerance class, fastening, size and thickness match. The standardised format simplifies toolroom logistics and replacement procedures, so machining centres and toolrooms can reduce setup complexity and minimise downtime during insert changes. Controlled chip flow and refined surface results The single-sided chipbreaker combined with a 0.2 mm corner radius is intended for turning tasks that demand a fine surface finish and consistent chip control. The chipformer is matched to the grade and geometry to guide chips away from the cutting zone, reducing rework and helping to protect workpiece integrity. For fine finishing passes or interrupted cuts, the small corner radius supports tidy profiles without sacrificing edge life. Versatile application focus for external and internal turning This rhombic insert is specified for general turning duties and is particularly suitable where changing engagement conditions or smaller toolholders are used. The 2.38 mm thickness, rhombic plate form and central fastening hole with a 40°–60° countersink give mechanical stability in both external and internal operations. Material-specific chipbreaker and grade selection remains the decisive factor for optimised performance across steels, alloyed materials and mixed production environments. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on the Tungaloy SH7025 turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967450 SKU: 6967450-Tungaloy Manufacturer SKU: TUN6967450 Brand: Tungaloy Model series: ISO turning inserts Material: carbide Facts ISO designation: DCGT070202 Size: 07 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.2 mm Insert angle: 55° Countersink angle: 40°–60° Special features Grade: SH7025 (coated carbide) Shape: rhombic Chipbreaker: single-sided Hole: central cylindrical hole with one-sided countersink Application: external and internal turning Compatibility: depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What work does the DCGT070202 SH7025 insert suit best? The DCGT070202 SH7025 Tungaloy turning insert is intended for external and internal turning where a balance of edge stability and toughness is required, making it suitable for varied engagement conditions. Can this insert be used with standard ISO holders? Yes, the DCGT070202 SH7025 insert follows ISO dimensions; compatibility with a holder requires matching form, clearance angle, tolerance class, fastening, size and thickness. How does the SH7025 grade affect tool life? The SH7025 coated carbide grade provides enhanced edge stability and wear resistance for the Tungaloy turning insert, which generally extends usable life and reduces the frequency of index changes. What chip control can be expected with this geometry? The single-sided chipbreaker on the DCGT070202 SH7025 insert is designed to guide chips consistently away from the cutting zone, aiding surface finish and process safety. Is the 0.2 mm corner radius suitable for finishing passes? Yes, the 0.2 mm corner radius on the DCGT070202 SH7025 insert supports fine finishing operations while maintaining adequate edge strength for interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com