DCET 11T302 SH730 Wendeplatten - Tungaloy
Benefit from the combination of a coated carbide SH730 grade, a 55° rhombic geometry and a fine 0.2 mm nose radius for stable cutting and consistent surface finish in small-part turning; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DCET 11T302 SH730 ISO turning insert, 55° rhombic – Tungaloy The DCET11T302 SH730 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering edge stability where engagement conditions vary. SH730 coated carbide grade 55° rhombic geometry for versatility 0.2 mm nose radius for fine turning One-sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Productivity gains through a resilient cutting grade The coated SH730 grade is formulated for edge stability under fluctuating engagement, making the insert particularly suitable for machining small tools and components. With a coated carbide substrate, the insert reduces the frequency of edge changes and supports steady cycle times, so throughput improves without complex process adjustments. The 55° rhombic layout provides a favourable cutting direction for a range of operations, and the modest 0.2 mm nose radius helps achieve precise contours while maintaining acceptable tool life. These properties together enable a reliable balance between surface quality and economical cutting performance. Clear compatibility with ISO toolholder systems This indexable insert conforms to ISO dimensions and is intended for use with matching external or boring toolholders; compatibility depends on form, relief angle, tolerance class, attachment and thickness. The insert’s 7° relief angle and 3.97 mm plate thickness must be checked against the holder specification to guarantee correct seating and clamp pressure. Where stability is critical, pairing the insert with an appropriately rigid holder and verified clamping kit prevents chatter and extends usable edge life. For verification of holder match and recommended clamping sets, Metav Werkzeuge provides technical advice and specification checks. Controlled chip formation and predictable edge behaviour The one-sided chipbreaker design is optimised for consistent chip control in turning tasks, reducing the risk of entanglement and improving machine uptime. Combined with the SH730 coating technology, the cutting edge resists abrasive wear and maintains geometry under interrupted cuts or variable feed conditions. This results in reproducible part quality and less rework, which is particularly advantageous where batch consistency matters. The cylindrical locating hole with a 40°–60° countersink supports secure fastening and repeatable indexability during insert changes. Practical selection and workshop handling tips When selecting this insert for daily workshop use, consider the workpiece material and stability of the setup: the grade is optimised for versatile applications in turning, but choosing the correct chipbreaker and cutting data is essential for best results. Use conservative feeds for fine finishing with the 0.2 mm radius and increase feed gradually when roughing to preserve edge condition. Keep a set of spare clamps and screws in the tool crib to avoid downtime during index changes. If additional data or tailored cutting parameters are required, Metav Werkzeuge can supply cutting charts and compatibility guidance by email or phone. For application advice, holder matching or further technical information on Tungaloy turning inserts, contact Metav Werkzeuge by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com and request assistance for SKU 6856657-Tungaloy. Technical data Article number: 6856657 Manufacturer SKU: TUN6856657 Model series: ISO turning inserts Designation: DCET11T302 Facts Radius: 0.2 mm Cutting angle: 55° Relief angle: 7° Thickness: 3.97 mm Size: 11 Special features Coated carbide grade SH730 Rhombic plate form One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) ISO-standard indexable insert for turning With hole for positive locating FAQ What materials is this insert suitable for? The DCET11T302 SH730 insert is a coated carbide grade optimised for a broad range of turning tasks; the SH730 formulation targets stability under variable engagement, so it performs well on typical steel and mixed-material turning applications. Which holders fit this ISO insert? Compatibility requires a holder that matches the ISO form DCET, the 7° relief angle, plate thickness 3.97 mm, and the 55° rhombic seating; verify the holder’s clamping system against these dimensions before assembly. How does the 0.2 mm nose radius affect finish and feeds? A 0.2 mm nose radius favours finer surface finishes and reduced cutting forces in finishing passes; for roughing, increasing feed while monitoring tool life is recommended to avoid premature edge chipping. Can this insert be used for internal turning (boring)? Yes, the ISO rhombic form and secure locating hole allow use in compatible boring bars for internal turning, provided the bar supports the 11 size and the 3.97 mm thickness. What does the chipbreaker type mean for machining? The one-sided chipbreaker gives consistent chip control in turning and helps prevent long, tangled chips; it is especially useful in automated or multi-part production where reliable chip evacuation matters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH730 Wendeplatten - Tungaloy
Combining the SH730 coated carbide grade with the ISO rhombic geometry and a 0.2 mm corner radius delivers stable cutting edges and consistent turning performance; order through Metav Werkzeuge or consult the Metav team for application-specific advice. DCET 11T302 SH730 (Tungaloy) — ISO rhombic turning insert for general turning A DCET 11T302 SH730 is an ISO‑standard rhombic turning insert designed for external and internal turning operations, offering a balance of edge stability and versatility for variable engagement conditions. ISO rhombic turning insert, ISO 11T302 SH730 coated carbide for edge stability 7° clearance angle for reliable cutting 0.2 mm corner radius, with centre hole and 40°–60° countersink Stable cutting performance for variable engagement The combination of the SH730 coating and the underlying coated carbide substrate is optimised for edge retention under changing cutting conditions. This grade is described as a tough, edge‑stable variant particularly suitable for smaller tool geometries and variable depths of cut; the result is fewer unexpected interruptions and steadier productivity. The design targets shops seeking a compromise between tool life and process stability while machining a wide range of turning tasks. Predictable fit and secure clamping for ISO toolholders Compatibility with holders is governed by form, free angle, tolerance class, fastening method, size and thickness. The ISO 11T302 designation and rhombic geometry make the insert straightforward to match to standard external holders and boring bars, while the centre hole with a cylindrical bore plus one‑sided countersink (40°–60°) ensures reliable mechanical clamping. This predictability reduces setup time and helps maintain repeatable positioning in multi‑insert tool assemblies. Geometry that balances finish and tool life The 0.2 mm corner radius combined with a 55° included angle provides a compromise between surface finish and edge strength: small radii aid finer finishes, while the rhombic form and 7° clearance preserve cutting edge stability during interrupted cuts. The plate thickness of 3.97 mm contributes to insert rigidity, which supports dimensional accuracy and reduces vibration in less rigid set‑ups. Where a finer or rougher finish is required, the geometry allows straightforward selection of an alternative radius or insert grade. Chip control and system advantages for efficient turning A single‑sided chipbreaker paired with the SH730 grade helps form controlled chips in many turning applications, particularly where engagement varies. The insert forms part of a system comprising a matching external holder or boring bar, clamping plate and replacement screws; this modular approach enables straightforward inventory handling and quick reconditioning during tool changeovers. The overall effect is improved process reliability and economical use of cutting edges in serial production. For application guidance or to secure suitable quantities of the Tungaloy SH730 inserts for stable, productive turning operations, contact Metav Werkzeuge for tailored technical advice and ordering support Technical data Article number: 6856624 SKU: 6856624-Tungaloy Manufacturer SKU: TUN6856624 Name: DCET11T302 SH730 Tungaloy turning insert Model series: ISO‑turning insert series (ISO‑Drehwendeschneidplatten) Measurements / core data Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Centre hole: yes Hole style: cylindrical hole + one‑sided countersink (40°–60°) Materials / features Material: carbide Grade/coating: SH730 (coated carbide) Shape: rhombic Chipbreaker: single‑sided Application: turning (external and internal) ISO designation: 11T302 System requirement: compatible holder, clamp plate and screws FAQ What is the primary application for this insert? The DCET11T302 SH730 Tungaloy turning insert is intended for external and internal turning operations where edge stability and predictable insert life are required; it is especially useful in variable engagement scenarios. How is compatibility with a toolholder checked? Compatibility is determined by the insert form, free angle, tolerance class, fastening type, size and thickness; the ISO 11T302 designation of the DCET11T302 SH730 makes matching to ISO rhombic holders straightforward. What performance characteristics does the SH730 grade provide? The SH730 grade denotes a tough, edge‑stable coated carbide designed for reliable cutting edge retention, making the DCET11T302 SH730 suitable for smaller tool geometries and changing cutting engagements. Which geometry features help achieve a good surface finish? The 0.2 mm corner radius and 55° included angle, together with a 7° clearance, support improved surface finish while maintaining sufficient edge strength for consistent turning performance with the DCET11T302 SH730 insert. How is the insert secured and what is the hole detail? The insert is secured via a centre hole and is designed with a cylindrical hole plus a one‑sided countersink (40°–60°), enabling reliable clamping in compatible holders and standard screw systems such as those used with the DCET11T302 SH730 SKU 6856624-Tungaloy Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 11T302 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH730 for robust edge stability, precise chip control and straightforward holder compatibility to keep turning operations productive; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DCET11T302 SH730 — ISO turning indexable insert, coated carbide, 0.2 mm radius (Tungaloy) The DCET11T302 SH730 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a one-sided chipbreaker and a geometry optimised for variable engagement conditions. Coated carbide SH730 for variable engagement Rhombic ISO insert with 55° geometry One-sided chipbreaker for reliable chips 0.2 mm corner radius, 3.97 mm plate thickness Reliable chip control for consistent component quality The combination of a one-sided chipbreaker and the SH730 coated carbide grade ensures controlled chip formation even when engagement conditions change. This leads to stable cutting forces and a reduced risk of built-up edge, which in turn supports repeatable surface finish and process stability. The 0.2 mm corner radius provides a compromise between strength at the cutting edge and the ability to produce fine radii on turned profiles, while the ISO rhombic geometry contributes to predictable load distribution during each cut. Flexible compatibility with a wide range of holders Compatibility with external holders or boring bars is determined by the insert's shape, 7° relief angle, tolerance class, clamping method, size and thickness. The rhombic form and the with-hole design (cylindrical hole plus single-sided countersink 40°–60°) allow secure clamping and simple indexability within standard ISO systems. These attributes make the insert suitable for machine shops that require quick insert changes and reliable seating in compatible toolholders, thereby reducing downtime and streamlining tool inventory. Durable coated carbide for demanding turning tasks The coated carbide grade SH730 is developed for toughness and edge stability, making it especially suitable for smaller tools or applications with irregular engagement. The 3.97 mm plate thickness adds mechanical stability to the cutting edge while the coating improves wear resistance under mixed cutting conditions. For workshop planners seeking productivity, the insert’s balance of edge life and process reliability supports longer productive cycles and fewer unexpected tool changes, contributing to efficient machining sequences. Contact Metav Werkzeuge for a tailored application assessment or to request a technical quotation for the Tungaloy DCET11T302 SH730 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6856751 SKU: 6856751-Tungaloy Manufacturer SKU: TUN6856751 ISO designation: DCET11T302 Shape: Rhombic Size: 11 mm Thickness: 3.97 mm Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Relief angle: 7° Geometry angle: 55° Corner radius: 0.2 mm Core technical data Size: 11 mm Thickness: 3.97 mm Geometry angle: 55° Clearance angle: 7° Corner radius: 0.2 mm Special features Coated carbide grade SH730 One-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning Compatibility determined by shape, relief angle and clamping FAQ What materials is this insert suitable for? The DCET11T302 SH730 Tungaloy turning insert is optimised for a wide range of materials thanks to the tough SH730 grade and is suitable where improved edge stability is required. How does the chipbreaker affect production? The one-sided chipbreaker on the DCET11T302 SH730 supports predictable chip formation and improves process stability, reducing interruptions for chip management. What are the geometry and relief angles? This insert features a 55° geometry and a 7° relief angle, offering a combination that balances strength and accessibility for common turning tasks. Can the insert be used in internal turning? Yes, the ISO rhombic form and secure clamping via the with-hole design make the insert suitable for both external and internal turning applications. How should a compatible holder be selected? Select a holder that matches the insert shape, 7° relief angle, tolerance class, clamping method, size (11 mm) and thickness (3.97 mm) to ensure correct seating and reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 J740 Wendeplatten - Tungaloy
Combining ISO-standard conformity with the Tungaloy J740 carbide grade and a 55° rhomboid geometry, this insert delivers a dependable balance of wear resistance and cutting-edge stability for turning operations; order the DCGT 070200 J740 insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DCGT 070200 J740 ISO turning insert (rhomboid, 55°) by Tungaloy The DCGT070200 J740 is an ISO‑standard rhomboid turning insert designed for external and internal turning, offering a 7° relief and a single‑sided chipbreaker for controlled chip formation and stable cutting. ISO‑standard rhomboid insert J740 Tungaloy grade for wear resistance 7° relief angle for consistent cutting Cylindrical hole with 40°–60° countersink Engineered to increase productivity through material‑aware design The insert is manufactured from carbide and specified in the J740 grade to complement the insert geometry with a focus on wear resistance, toughness and cutting‑edge stability. This combination translates into fewer tool changes and more predictable tool life under comparable conditions, reducing the cost per component. The built‑in single‑sided chipbreaker promotes reliable chip control during turning operations, which in turn helps to protect the workpiece surface and the toolholder from unexpected interruptions. For production environments that prioritise uptime, the balanced properties of the grade make the insert a pragmatic choice for repeatable performance. Accurate fit and secure clamping for repeatable surface quality Compatibility with holders is defined by the insert form, relief/clearance angle, tolerance class, attachment method, size and thickness. The rhomboid shape with a 55° cutting angle provides a favourable approach for both profiling and general turning, while the 7° relief reduces rubbing and heat build‑up. The central cylindrical hole with a single‑side countersink (40°–60°) ensures a positive seating and secure clamping, helping to minimise vibration and to maintain a steady cutting geometry. With a 2.38 mm thickness and size 07, the insert suits setups where rigid clamping and controlled overhang are crucial for achieving consistent surface finishes. Application guidance that supports decision‑making on the shop floor This indexable insert is intended principally for turning; when selecting inserts from the ISO series, match the chipbreaker and the J740 grade to the workpiece material and the machining stability available. The grade’s emphasis on a balance between hardness and toughness is advantageous when a stable cutting edge is required across medium to heavy interrupted cuts or when prolonged tool life is a priority. Where holder compatibility or process parameters are uncertain, a short consultation with a tooling specialist will quickly identify the appropriate clamping seat and cutting data to exploit the insert’s strengths and to avoid avoidable wear modes. For precise turning applications, contact Metav Werkzeuge for tailored advice on holder compatibility and process parameters and to order the DCGT 070200 J740 insert (manufacturer SKU TUN6802763) via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6802763-Tungaloy Manufacturer SKU: TUN6802763 Model series: ISO turning indexable inserts Material: Carbide Manufacturer: Tungaloy Core specifications Cutting angle: 55° Relief/clearance angle: 7° Thickness: 2.38 mm Size: 07 Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Features Carbide grade: Tungaloy J740 Typical application: external and internal turning Geometry: rhomboid insert form Compatibility factors: form, clearance, tolerance class, attachment, size, thickness FAQ What turning tasks is this insert best suited for? The DCGT 070200 J740 insert is designed for external and internal turning where a balance of wear resistance and edge stability is required; its rhomboid 55° geometry and single‑sided chipbreaker make it appropriate for general finishing and medium‑duty machining. How does the J740 grade affect tool life and performance? The J740 Tungaloy grade enhances the insert’s wear resistance and toughness, producing a stable cutting edge that extends tool life under varying chip loads and reduces the frequency of index changes. Which holder features must be checked for correct fitment? Ensure the holder matches the insert form, 7° relief, tolerance class, attachment style, size 07 and thickness 2.38 mm; the cylindrical hole with a 40°–60° countersink requires compatible clamping seats for secure mounting. Can this insert handle interrupted cuts or harder materials? The grade’s focus on toughness and edge stability supports interrupted cuts, but final suitability depends on material, machining parameters and machine rigidity; select chipbreaker and cutting data to match the workpiece and stability. Is the insert reversible and how many cutting edges are available? The DCGT rhomboid insert design provides usable edges according to the standard ISO geometry; exact edge count depends on indexable insert orientation and rotation—consult the product specifications for edge indexing details. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 J740 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, wear-resistant carbide grade and secure clamping for reliable turning operations; order directly via Metav Werkzeuge or contact the consultants for application-specific advice. DCGT 070200 J740 Tungaloy indexable insert for turning (ISO rhombic 07, 7° clearance) DCGT070200 J740 Tungaloy indexable insert designed for ISO-compliant external and internal turning with a rhombic geometry and single-sided chipbreaker ISO rhombic insert DCGT070200 J740 7° clearance angle for versatile turning Single-sided chipbreaker for consistent chips Cylindrical hole with 40°–60° countersink Dependable cutting for stable production cycles The indexable insert delivers a predictable balance of wear resistance and toughness thanks to the J740 carbide grade. The combination of this grade with a rhombic ISO geometry ensures stable cutting across a broad range of turning tasks. Use of a dedicated single-sided chipbreaker reduces chip entanglement and supports smooth evacuation, which in turn helps maintain cycle times and reduces unexpected downtime. Benefits are most apparent in serial production where repeatability and tool life contribute directly to cost efficiency. Secure seating and precise geometry for repeatable accuracy Compatibility with a holder depends on form, clearance angle, tolerance class, fixing method, size and thickness; these factors are all taken into account by the ISO system. The 7° clearance and 55° main angle of the insert provide predictable cutting engagement and help avoid rubbing on the flank, supporting superior surface finish and dimensional control. The cylindrical hole with a 40°–60° countersink gives reliable clamping and repeatable seat position, which reduces variability between indexings and supports consistent process quality. Material technology and tool behaviour explained Manufactured from high-quality carbide, the insert’s modern cutting-material composition is tuned for turning applications where a mix of abrasion resistance and edge stability is required. The J740 specification is selected to complement geometry by offering controlled wear progression and sufficient toughness to withstand intermittent loads. For users unfamiliar with carbide grades: the designation indicates a tailored microstructure and coating/finish that together influence tool life, edge retention and performance on different steels and non-ferrous materials. Practical integration and selection guidance When integrating this insert into a toolset, match the insert to the holder form and tolerance class specified by the machine tool supplier. The ISO designation DCGT070200 simplifies selection of compatible holders and clamping kits. For optimisation, choose the chipbreaker and grade that suit the workpiece material and the stability of the setup—short overhangs and rigid toolholding increase achievable cutting parameters. If needed, Metav Werkzeuge can advise on the correct mating holder or replacement screws to ensure correct assembly and maximum tool performance. Contact Metav Werkzeuge for tailored advice on the Tungaloy J740 insert and recommendations for holder compatibility; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific solutions Technical data Article number: 6802766 Manufacturer SKU: TUN6802766 SKU: 6802766-Tungaloy Model series: ISO indexable turning inserts Facts Size: 07 Thickness: 2.38 mm Clearance angle: 7° Main angle: 55° Design and special features ISO designation DCGT070200 Rhombic plate shape Carbide material Grade J740 (Tungaloy) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The Tungaloy DCGT070200 J740 insert is designed for turning and provides a broad material coverage thanks to the J740 carbide grade; it performs particularly well on standard steels and mixed production runs where wear resistance and edge stability are required. How does the chipbreaker affect performance? A single-sided chipbreaker on this insert results in consistent chip formation and controlled evacuation, which supports uninterrupted production and reduces the risk of chip interference in confined workspaces. What must be checked for holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; ensure the holder matches the ISO DCGT geometry and uses the correct clamping screws and backing pad. Can this insert be used for internal turning as well as external turning? Yes, the insert’s rhombic shape and geometry allow for both external and internal turning applications where the holder and overhang permit stable cutting conditions. How does the 7° clearance angle influence machining results? The 7° clearance helps prevent flank contact and reduces rubbing, contributing to improved surface finish and reduced heat generation at the tool edge during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH7025 Wendeplatten - Tungaloy
Combine the toughness of SH7025, the ISO‑compliant rhombic geometry and the secure cylindrical hole with countersink to maintain consistent chip control and tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored cutting parameters. DCGT 070200 SH7025 Tungaloy — Turning indexable insert, rhombic 07, 7° clearance A DCGT 070200 SH7025 indexable insert crafted for ISO‑standard turning, suitable for both external and internal turning tasks. ISO‑standard rhombic insert 07 size Coated carbide grade SH7025 7° clearance angle for versatile turning Cylindrical hole with 40°–60° countersink Single‑sided chipbreaker for controlled chips Consistent geometry for predictable machining The insert's rhombic shape and 07 size deliver a well‑defined cutting geometry that supports repeatable results in a production environment. The 55° included angle and 7° clearance angle reduce vibrational tendencies when paired with a correctly rated holder, which promotes surface finish quality and dimensional stability. As an ISO‑standard component, the plate fits a wide range of holders when form, tolerance class, fastening and thickness are matched, simplifying tool inventory and changeovers. Tough grade and coating for variable engagement The SH7025 grade is a coated carbide designed for toughness and a stable cutting edge, particularly beneficial with smaller cutters or fluctuating engagement conditions. This composition helps resist chipping during transient loads while maintaining wear resistance under continuous cutting. The result is longer effective tool life and fewer interruptions for insert changes, supporting higher uptime and consistent part quality in mixed‑batch production. Secure clamping and chip management Clamping reliability is increased by the cylindrical hole with a single‑sided countersink (40°–60°), ensuring the insert seats firmly in the pocket and resists motion under cutting forces. The integrated single‑sided chipbreaker controls chip formation for many turning tasks, reducing entanglement and aiding material evacuation. Correct pairing of chipbreaker style and cutter grade to the workpiece and operation will deliver the best balance between surface finish and process safety. Versatile use in external and internal turning Intended for general turning operations, the plate is well suited to external and internal turning where a blend of toughness and wear resistance is required. Selection of this insert supports applications with varying depths of cut and engagement angles; choosing the appropriate holder and stabilising the setup will maximise the benefits of the grade and geometry. The modular nature of ISO‑compliant inserts also means straightforward replacement and inventory management for machining shops. For reliable turning performance, order the Tungaloy DCGT 070200 SH7025 insert from Metav Werkzeuge or contact our consultants for process‑specific recommendations Technical data Article number: 7743488 SKU: 7743488-Tungaloy Manufacturer SKU: TUN7743488 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Numeric data ISO code: 070200 Size: 07 Thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Special features Carbide, coated (SH7025) Rhombic plate form Cylindrical hole + single‑sided countersink (40°–60°) Single‑sided chipbreaker Suitable for external and internal turning FAQ What makes the SH7025 grade suitable for turning operations? The SH7025 coated carbide grade offers enhanced toughness and a stable cutting edge, making the DCGT 070200 SH7025 insert appropriate for small tools and situations with variable engagement. Which toolholders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the rhombic 07 size and the cylindrical hole with countersink require holders designed for DCGT‑style ISO plates. Can this insert be used for internal turning? Yes, the design supports both external and internal turning, with the geometry and chipbreaker aiding control in confined bores as long as the holder and setup provide sufficient stability. Is the insert suitable for interrupted cuts? The toughness of SH7025 provides resistance to chipping under fluctuating loads, making it a good option for interrupted cuts when combined with a rigid setup. How should the chipbreaker be chosen for specific materials? Select the chipbreaker style in line with workpiece material and cutting conditions; the supplied single‑sided chipbreaker offers controlled chips for many common turning tasks but may be swapped for specialised breakers when machining challenging materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH7025 Wendeplatten - Tungaloy
Take advantage of the coated carbide SH7025 and the 55° rhombic geometry for stable cutting and long tool life; integrate the insert into ISO clamping systems for fast changeovers. Order the DCGT070200 SH7025 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for precise application support. DCGT070200 SH7025 indexable turning insert, 55° — Tungaloy DCGT070200 SH7025 is a compact, ISO-standard turning insert designed for precision external and internal turning with a focus on stable cutting edges. Coated carbide grade SH7025 55° rhombic insert geometry 7° positive rake angle Cylindrical hole with 40°–60° countersink Precise cutting performance for demanding turning tasks The combination of coated cemented carbide and the SH7025 grade delivers a tough, edge-stable cutting material that is especially suited to turning operations where engagement conditions vary. The coating enhances wear resistance while the substrate maintains edge integrity, resulting in consistent component dimensions and surface finish. This insert is engineered for predictable tool life, reducing the need for frequent index changes and enabling a smoother production flow in batch and short-run work. Geometry and clamping that reduce setup time The 55° rhombic geometry and 7° rake create a balance between cutting force and edge strength, making the insert suitable for both finish and light roughing operations when matched with the correct holder. A 2.38 mm plate thickness provides sufficient rigidity for stable cutting, while the cylindrical hole with single-sided countersink (40°–60°) ensures secure and repeatable clamping in ISO-style toolholders. Greater clamping stability translates into fewer vibrations and improved dimensional repeatability on turned parts. Application focus and material behaviour The grade is described as tough and edge-stable, which makes the insert a reliable choice for turning tasks on smaller tools or where the depth of cut and engagement fluctuate. The single-sided chipbreaker controls chip flow for many turning conditions, simplifying chip management and contributing to operator safety and machine uptime. Selection of the appropriate chipbreaker geometry and cutting parameters will optimise performance for each workpiece and machining strategy. Integration into ISO turning systems and practical benefits As an ISO-standard insert (DCGT070200), compatibility with holders is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert is intended to be used as part of a system comprising the insert itself, a suitable external holder or boring bar, a support/clamping kit and replacement screws. This system approach supports fast changeovers, predictable assembly, and easier spare-part management on the shop floor, helping to reduce production interruptions. Contact Metav Werkzeuge for tailored advice on Tungaloy SH7025 inserts and recommendations for clamping and cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6967467 Manufacturer SKU: TUN6967467 Brand: Tungaloy Model series: ISO turning inserts Core Data Approach angle: 55° Rake angle: 7° Thickness: 2.38 mm Insert size: 07 Manufacturer article number: 6967467 Special features ISO designation: DCGT070200 Coating / grade: SH7025 Material: cemented carbide Plate shape: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Intended application: turning System components: insert, holder or boring bar, support/clamping kit, replacement screws FAQ What turning operations is this insert suited for? The DCGT070200 SH7025 Tungaloy insert is intended for external and internal turning, with a design that favours stable cutting and variable engagement conditions. How does the SH7025 grade affect tool life? The SH7025 coating and substrate combination improves wear resistance and maintains a strong cutting edge, which extends predictable tool life for many turning applications. Which holder features are required for correct compatibility? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DCGT070200 fits ISO clamping systems that match these parameters. What are the benefits of the rhombic 55° geometry? The 55° rhombic geometry balances cutting forces and edge strength, enabling accurate finishes and reliable performance on both finish and light roughing passes. Is the insert supplied with mounting screws or clamping parts? The insert is part of a system approach; holders, support/clamping kits and replacement screws are typically supplied separately so that the correct combination can be selected for the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant SH7025 coated carbide grade, ISO-standard rhombic geometry and a 7° relief for predictable, productive turning; order the insert directly via Metav Werkzeuge or consult the team for application advice. DCGT 070200 SH7025 — ISO turning indexable insert, 55° rhombic (Tungaloy) The DCGT070200 SH7025 is an ISO-standard rhombic indexable insert for external and internal turning, designed for stable edge performance and versatile use in changing engagement conditions. Coated carbide SH7025 grade ISO 070200 rhombic 07 form 7° relief angle for general turning Cylindrical hole with single-sided countersink Stable cutting performance for varied conditions The SH7025 grade is a coated carbide designed for consistent edge stability and reliable performance in turning operations. As an ISO-patternised rhombic insert with a 55° included angle, it supports both external and internal machining while reducing the need for frequent tool changes. The combination of substrate and coating provides improved wear resistance and predictable flank wear progression, which contributes to longer in-service periods and less unscheduled downtime. This stability makes the insert particularly suitable where variable engagement and smaller toolholders are used, enabling a steady production rhythm. Precise seating and secure clamping reduce vibration Compatibility with cutting toolholders is determined by insert form, relief, tolerance class, fixation, size and thickness. The DCGT070200 features a cylindrical hole with a single-sided countersink (40°–60°) and a 2.38 mm thickness, ensuring a repeatable mechanical fit in matched holders or boring bars. Secure, concentric clamping minimises micro-movement and vibration, which directly improves surface finish and dimensional consistency. Careful selection of holder geometry and clamp components thus converts the insert’s geometry into measurable gains in process stability. Efficient chip control for higher productivity The one-sided chipbreaker geometry promotes controlled chip formation and evacuation during turning, reducing the risk of chip-related interruptions. With a single-sided chipbreaker and an edge designed for toughness, the insert balances productive material removal with durable cutting edges. This results in fewer tool indexings and a lower overall cost per component in many turning scenarios. For operations that prioritise throughput and repeatability, the insert’s chip control characteristics contribute to a more economical machining cycle. Simple system integration and inventory benefits As part of a standard ISO series, the insert integrates easily into common system builds: the ISO insert, a matched external holder or boring bar, a precision shim/clamp set and spare screws form a compact tooling solution. The standardisation reduces the number of unique items in stock and simplifies replacements and maintenance planning. Where process planners favour a modular approach, the ISO insert format and compatibility with compatible holders make it straightforward to scale tooling across multiple machines while keeping spare parts — such as spare screws — consistent. For application support or availability of Tungaloy SH7025 inserts, contact Metav Werkzeuge for expert advice and order handling: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 7743494-Tungaloy Manufacturer SKU: TUN7743494 Manufacturer article no.: 7743494 Designation: DCGT070200 SH7025 Material: Carbide Application: Turning Core data ISO code: 070200 Insert size: 07 Thickness: 2.38 mm Relief angle: 7° Included angle: 55° Hole: with hole Design and features Shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Coating/grade: SH7025 Series: ISO turning indexable inserts FAQ What turning operations is this insert intended for? The DCGT070200 SH7025 insert is suitable for both external and internal turning operations where a 55° rhombic geometry and a 7° relief provide the required cutting engagement. How does the hole style affect clamping and stability? The cylindrical hole with a single-sided countersink on the DCGT070200 promotes concentric seating and reliable clamping, improving stability in the toolholder and reducing vibration-related issues. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, free angle and size; the DCGT070200 is designed to fit standard external holders and boring bars that accept ISO rhombic inserts of size 07 with a 070200 code. What benefits does the SH7025 grade deliver in production? The SH7025 coated carbide provides a balance of toughness and edge stability, giving longer in-service life under variable engagement and helping to maintain productivity in interrupted or varying-turning conditions. Is the insert provided with fixation hardware? The insert is supplied as the cutting element; integration into a tooling system requires the appropriate holder, shim/clamp set and replacement screws as part of the complete assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH725 Wendeplatten - Tungaloy
Benefit from the combination of robust coated carbide, edge stability and ISO compatibility for consistent turning results; the insert suits both external and internal turning where small tools or variable engagement demand reliable performance. Order the part via Metav Werkzeuge or consult their technical advisers for selection support. DCGT 070200 SH725 — Tungaloy ISO turning insert (rhombic 07, 55°) The DCGT070200 SH725 is an ISO‑standard indexable turning insert designed for general turning applications, offering a compact rhombic geometry for versatile external and internal machining. *ISO‑standard rhombic 07 insert *Coated carbide grade SH725 *7° relief angle for stable cutting *Cylindrical hole with countersink 40°–60° *2.38 mm thickness for secure clamping Dependable cutting performance for variable engagements The DCGT070200 series combines a coated carbide substrate with the SH725 grade, engineered to provide a balance between toughness and wear resistance. This makes the insert particularly suitable for operations where smaller tools or changing depths of cut are common. The result is a stable cutting edge that reduces the risk of premature edge failure and helps maintain consistent surface finish. By selecting an appropriate chipbreaker and matching the grade to the workpiece and machine stability, productivity is improved while tool-change frequency is reduced, supporting cost‑effective machining. Designed for straightforward mounting and ISO compatibility Compatibility with toolholders depends on geometry, relief angle, tolerance class, fixing method, size and thickness; the ISO‑standard designation ensures predictable fitting with ISO‑compliant external holders and boring bars. Key mounting characteristics are the rhombic 07 form, a 55° included angle, a 7° relief angle and a 2.38 mm plate thickness, together with a cylindrical hole featuring a single‑side countersink (40°–60°). These defined features simplify selection and secure clamping, reducing setup time and improving repeatability across production batches. Practical application advice for consistent results Use the insert for both external and internal turning where a single‑sided chipbreaker is appropriate; the chip control and edge properties of the SH725 grade favour operations with fluctuating engagement or interrupted cuts. For materials and cutting conditions that demand increased toughness rather than the hardest wear resistance, this grade delivers reliable performance. Combining the single‑sided chipbreaker with the correct feed and speed settings will optimise chip evacuation and protect the cutting edge, leading to longer in‑process life and more consistent cycle times on the shop floor. For machining applications that require a balanced combination of toughness and stability, contact Metav Werkzeuge for availability and tailored application advice on Tungaloy DCGT070200 SH725 inserts via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6737018 SKU: 6737018-Tungaloy Manufacturer SKU: TUN6737018 Model series: ISO‑Drehwendeschneidplatten Data ISO code: 070200 Included angle: 55° Relief angle: 7° Thickness: 2.38 mm Size: 07 Special features Rhombic insert form Coated carbide grade SH725 Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑compliant turning insert FAQ What materials is this insert intended for? The DCGT070200 SH725 insert is a coated carbide grade formulated for general turning; selection of the chipbreaker and machining parameters should be matched to the workpiece material and production conditions. How does the SH725 grade affect tool life? SH725 provides increased toughness and edge stability, helping to extend in‑process life when machining with small tools or under variable engagement compared with harder, more brittle grades. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and mounting conventions; compatibility is governed by form, relief angle, tolerance class, fixing method, size and thickness. What clamping features must the holder support? Holders should accept a rhombic 07 insert with a cylindrical hole and single‑side countersink (40°–60°), and provide secure support for a 2.38 mm thickness plate. Can this insert be used for internal turning? The insert is suitable for both external and internal turning when the toolholder provides adequate rigidity and chip evacuation for the chosen application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of consistent chip control, durable edge stability and straightforward ISO compatibility to keep turning operations productive and predictable; order through Metav Werkzeuge or consult the team for application advice. DCGT070200 SH725 indexable turning insert for rhombic 07 applications by Tungaloy The DCGT070200 SH725 is an ISO-standard rhombic indexable insert designed for external and internal turning, featuring a 7° relief angle and a single-sided chipbreaker for reliable chip formation. ISO-standard rhombic 07 insert Coated carbide SH725 for tough cutting 7° relief angle for versatile engagement Cylindrical hole with 40°–60° countersink Secure chip control for steady productivity The combination of a single-sided chipbreaker and coated carbide construction provides predictable chip formation during both light finishing and more aggressive passes. The chipformer geometry channels swarf away from the cutting zone, reducing the risk of entanglement and enabling higher uninterrupted cutting times. For workshop planners, this means fewer interruptions and a smoother machine cycle time; the chip control feature is especially beneficial when turning interrupted surfaces or when tool engagement varies frequently. Durable cutting edge for mixed and demanding conditions The insert’s SH725 grade is a tough, edge-stable carbide coating engineered for wear resistance under variable cutting conditions. This translates into extended edge life and more consistent surface finish across batches, reducing rework and tool change frequency. When used in smaller toolholders or setups with fluctuating depths of cut, the robust grade helps maintain dimensional accuracy and repeatability, supporting higher overall process reliability for serial and job-shop production. Seamless ISO integration and practical mounting benefits Designed as an ISO-standard component, the rhombic 07 form with a 7° relief and 55° cutting angle fits established holder families when seat geometry, tolerance class, mounting method, size and thickness match. The 2.38 mm thickness and the cylindrical hole with a 40°–60° countersink simplify secure fastening and position repeatability. This format allows straightforward inventory harmonisation with existing ISO turning systems and shortens set-up times, enabling fast replacement during scheduled stops without extensive requalification. For reliable turning with proven chip control and edge stability, specify the DCGT070200 SH725 indexable insert from Tungaloy and contact Metav Werkzeuge for tailored application guidance or to place an order at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6737134 Manufacturer SKU: TUN6737134 Label: DCGT070200 SH725 Tungaloy-Wendeplatte SKU: 6737134-Tungaloy Core specifications Thickness: 2.38 mm Size: 07 Relief angle: 7° Cutting angle: 55° ISO designation: 070200 Design & special features Coated carbide (SH725) Rhombic insert form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard turning insert for external and internal turning Compatibility dependent on seat geometry, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCGT070200 SH725 is a coated carbide insert designed as a general-purpose grade; SH725 performs well where a tough, edge-stable grade is required for varied turning operations. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation, which helps maintain consistent cutting conditions and reduces downtime for swarf handling. Is this insert compatible with existing ISO holders? Compatibility depends on matching seat geometry, relief angle, tolerance class, fastening method, size and thickness; the DCGT070200 conforms to the ISO-standard form to ease integration. What is the mounting detail of the insert? The insert features a cylindrical centre hole with a one-sided countersink (40°–60°) to ensure secure clamping and repeatable seating in compatible holders. Which characteristics support longer edge life? The SH725 coated carbide grade provides enhanced edge stability and wear resistance, which contributes to fewer tool changes and improved batch consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH725 Wendeplatten - Tungaloy
Combining the SH725 coated-carbide grade with a rhombic 07 form and a 7° clearance, this insert delivers stable cutting edges and consistent chip control across varied turning tasks; the cylindrical hole with a single-sided countersink ensures secure seating in ISO holders. Order the DCGT070200 SH725 insert directly via Metav Werkzeuge or request application advice from our consultants. DCGT 070200 SH725 ISO turning insert, rhombic 07, Tungaloy A DCGT070200 SH725 insert engineered for external and internal turning, offering a tough, edge-stable coated grade suited to smaller tools and changing engagement conditions. Coated carbide SH725 for edge stability ISO rhombic 07 form, 55° cutting angle 7° clearance angle for predictable seating Cylindrical hole with single-sided countersink Consistent performance where engagement varies The combination of the SH725 coating and a coated carbide substrate gives reliable edge integrity under fluctuating loads, making this insert particularly effective when machining with smaller toolholders or when the depth of cut varies. The 55° cutting angle and rhombic 07 geometry balance strength and versatility, enabling smooth transitions between finishing and light roughing. This stability reduces the need for frequent edge changes and supports uninterrupted production cycles, contributing to measurable efficiency gains in batch workflows. Secure mounting and ISO compatibility for fast setup Designed as an ISO-standard insert, compatibility with the toolholder depends on form, clearance, tolerance class, fastening type, size and thickness. The 7° clearance and standardised dimensions allow repeatable seating, while the cylindrical hole and single-sided countersink (40°–60°) provide a secure mechanical location and positive clamp engagement. These features shorten setup times and minimise indexing errors, supporting predictable tool behaviour and reducing downtime during insert changes. Better chip control and surface quality with targeted geometry Equipped with a one-sided chipbreaker, this insert channels chips away from the cutting zone, which helps maintain stable cutting conditions and enhances surface finish on workpieces. The combination of chip control and the coated carbide grade lowers the risk of built-up edge and improves repeatability in serial turning operations. As a result, operators benefit from fewer secondary processes and a higher first-pass yield, saving time and resources on the shop floor. Practical system approach and workshop benefits The insert forms one component of a complete system comprising an ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws. Choosing the proper chipbreaker and SH725 grade according to the workpiece engagement and holder stability ensures longevity and consistent results. The design supports efficient inventory management—one standardised insert type covers a range of turning tasks—while engineered toughness reduces unexpected edge failure, fostering predictable tool life and lower total operating costs. For consistent machining performance with Tungaloy’s SH725 grade, contact Metav Werkzeuge for order placement and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737009 SKU: 6737009-Tungaloy Manufacturer SKU: TUN6737009 Brand: Tungaloy Model series: ISO turning inserts Label: DCGT070200 SH725 Tungaloy-insert Application: Turning Material: Carbide Numbers / Core technical data Thickness: 2.38 mm Cutting angle: 55° Clearance angle: 7° Size: 07 ISO code: 070200 Designs / Special features Rhombic plate form One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Coated grade SH725 Coated carbide substrate Compatibility determined by form, clearance, tolerance class, fastening, size and thickness System components: insert, outer holder or boring bar, shim/clamp set and replacement screws FAQ Which operations suit this insert best? This insert is intended for external and internal turning; the geometry and SH725 grade make it versatile across light roughing to finishing applications. How does the SH725 grade behave under changing engagement? The SH725 coated-carbide grade is formulated for edge stability under variable loads, providing longer tool life where depth of cut and engagement fluctuate. What must be considered for holder compatibility? Holder compatibility depends on form, 7° clearance, tolerance class, fastening method, size and thickness; the cylindrical hole with countersink ensures secure clamping in compatible ISO holders. What is the purpose of the single-sided countersink? The single-sided countersink (40°–60°) improves seating alignment and clamp contact, reducing insert movement and improving repeatability during indexing. Can this insert be used in small-tool applications? Yes, the grade and geometry are specifically noted for good performance in smaller tools and changing engagement conditions, offering stable cutting edges and reliable chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of edge-stable SH725 grade, ISO‑standard geometry, and a secure clamping interface for consistent turning results; order the insert through Metav Werkzeuge or consult our technical team for process optimisation. DCGT 070200 SH725 Tungaloy indexable turning insert for turning, 7° clearance The DCGT 070200 SH725 is an ISO‑standard, rhombic indexable turning insert designed for external and internal turning; it provides a balance of toughness and edge stability for variable engagement conditions. Coated cemented carbide SH725 grade 7° clearance angle for accurate relief Rhombic 07 form with 55° included angle Cylindrical hole with single‑side countersink Stable cutting performance under variable conditions The SH725 coating and the underlying coated cemented carbide substrate deliver a combination of toughness and wear resistance that stabilises the cutting edge during interrupted cuts and changing engagement. This results in consistent chip formation and reduced risk of edge chipping when machining with smaller tool geometries or varying cut depths. For production environments seeking steady cycle times, the robust grade lowers the probability of premature tool changes and contributes to improved overall productivity. Precise geometry and secure locating for repeatable parts The insert’s rhombic 07 form with a 55° included angle and a 7° clearance ensures predictable cutting forces and good access on shoulders and profiles. The cylindrical hole with a single‑side countersink (40°–60°) provides reliable seating and repeatable axial positioning in compatible holders, while the 2.38 mm plate thickness increases stiffness for this size class. Together, these features support repeatable part tolerances and minimise vibration when combined with a correctly matched holder, shim and clamping set. Practical selection guidance for efficient use ISO standardisation simplifies holder selection: compatibility depends on insert shape, clearance angle, tolerance class, fixing method, size and thickness. The single‑sided chipbreaker is suitable for general turning; choose the chipformer and cutting data according to workpiece material and machine stability. Typical system components include an ISO‑matched external holder or boring bar, a locating shim and the required clamp and replacement screw set. Following this guidance reduces set‑up time and helps achieve the intended surface finish and cycle stability. For process‑reliable turning operations choose the Tungaloy SH725 grade insert and contact Metav Werkzeuge for tailored advice or to request supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer SKU: TUN6838672 SKU: 6838672-Tungaloy Name: DCGT070200 SH725 Tungaloy insert Material: Cemented carbide Series: ISO turning indexable inserts Facts Included angle: 55° Clearance angle: 7° Thickness: 2.38 mm Size: 07 Plate form: Rhombic Special features Coated grade SH725 Single‑sided chipbreaker Cylindrical hole + one‑side countersink 40°–60° ISO‑standardised geometry For external and internal turning FAQ What holder features are required for correct fit? The insert requires an ISO‑matched holder whose seat geometry, relief angle, tolerance class, fixing method, size and thickness correspond to the DCGT 070200 shape; correct mating ensures secure clamping and repeatable positioning. Which machining tasks suit this grade and shape? The SH725 grade is engineered for turning with a focus on toughness and edge stability; the rhombic 07 form and 55° included angle make it suitable for general external and internal turning operations where variable engagement occurs. How does the single‑sided chipbreaker affect machining? A single‑sided chipbreaker promotes controlled chip formation in common turning conditions; when using the DCGT 070200 SH725 insert, select the chipformer and cutting data according to the workpiece material and machine rigidity for best performance. Is this insert compatible with interrupted cuts and small tools? Yes, the coated carbide SH725 is formulated to withstand interrupted cuts and is particularly appropriate for smaller tool geometries or situations with changing engagement, offering reduced edge chipping risk. What is the exact product identification for ordering? Order using the designation DCGT070200 SH725 (Tungaloy) or reference the SKU 6838672‑Tungaloy / Manufacturer SKU TUN6838672 to ensure the correct insert and grade are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070200 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of an SH730 coated carbide grade, ISO‑compliant geometry and a 7° clearance angle for consistent cutting performance and long tool life; order the insert via Metav Werkzeuge or request technical advice from the consultants. DCGT070200 SH730 Tungaloy indexable insert for turning – ISO rhombic 07, 7° clearance DCGT070200 SH730 Tungaloy indexable insert designed for general turning applications where stability and edge robustness are required, suitable for both external and internal turning. SH730 coated carbide for stable cutting edges ISO rhombic 07 geometry with 55° included angle 7° clearance angle for reduced rubbing Cylindrical hole with 40°–60° countersink Consistent cutting performance and extended tool life The combination of a coated carbide substrate and the SH730 grade delivers a balance of toughness and wear resistance that suits variable engagement conditions and smaller toolholders. The rhombic ISO 07 format and the 55° included angle provide stable cutting geometry for general turning operations, while the 7° clearance reduces flank contact and heat build‑up. These characteristics translate into fewer indexings, longer uninterrupted cycles and improved productivity in series production or mixed batches. The coated surface improves abrasion resistance and makes the insert a dependable option for machining a wide range of steels and alloyed materials. Simple compatibility and secure mounting for reliable setup Compatibility with toolholders is ensured by standardised ISO designation and by defined parameters such as form, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), enabling secure clamping in most ISO‑conforming external holders and boring bars. Because the plate thickness is 2.38 mm and the size is 07, matching a holder of the same ISO family is straightforward; this minimises setup time and reduces the risk of incorrect pairing during tool changes. A predictable mounting interface contributes directly to process stability and reproducible part quality. Application suitability and practical advantages in turning Engineered for turning, the insert features a one‑sided chipbreaker and a geometry tuned for reliable chip control under varying conditions. The grade performs well when cutting steels and works effectively across a broad material spectrum; select the chipbreaker and grade to match the workpiece material and the required surface finish. For shops seeking efficient machining cycles, the insert’s edge stability supports higher metal removal rates where machine rigidity and process parameters allow, and its toughness helps avoid premature edge chipping during interrupted cuts. Clear technical data and ISO conformity simplify tool selection and inventory management. Contact Metav Werkzeuge for detailed application guidance on the Tungaloy SH730 turning insert and to arrange supply through our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6854001 SKU: 6854001-Tungaloy Manufacturer SKU: TUN6854001 Model series: ISO indexable turning inserts Material: coated carbide Grade: SH730 ISO designation: DCGT070200 Application: Turning Included angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 07 Plate form: rhombic With hole: yes Hole style: cylindrical hole + one‑side countersink (40°–60°) Facts ISO rhombic 07 geometry One‑sided chipbreaker Coated carbide substrate ISO‑normed compatibility parameters For external and internal turning Special features Stable cutting edge behaviour with SH730 grade Designed for smaller toolholders and varying engagement Reduced flank contact through 7° clearance Suitable for a wide range of steels and alloyed materials System components: insert, matching holder or boring bar, shim/clamping set and replacement screw FAQ What workpiece materials are suitable for this insert? The DCGT070200 SH730 Tungaloy indexable insert is specified for a broad material range, with the SH730 grade providing toughness and edge stability particularly suited to steels and alloyed steels. How does the insert secure to the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) to allow secure clamping in ISO‑compatible holders; correct matching by form, tolerance class and thickness is essential for reliable fixation. Can the geometry handle interrupted cuts? Yes, the SH730 grade and the insert’s robust edge design provide resistance to chipping, making it appropriate for interrupted cuts when combined with adequate machine and workpiece support. What benefits does the 7° clearance angle provide? The 7° clearance reduces flank rubbing and heat generation, improving surface finish and decreasing the risk of thermal damage to the cutting edge during continuous turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070200 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade and precise ISO geometry for low cutting forces and consistent surface finish; order the DCGT070200 TH10 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for application matching. DCGT070200 TH10 Tungaloy ISO turning insert for turning DCGT070200 TH10 is an ISO-format rhombic turning insert designed for external and internal turning, offering a sharp uncoated carbide grade that supports low cutting forces and clean surface finishes. ISO rhombic insert DCGT070200, 55° cutting angle Uncoated carbide grade TH10 for low cutting forces 7° clearance angle, thickness 2.38 mm One-sided chipbreaker with centre hole for secure clamping Sharp, uncoated carbide for clean finishes and light cutting The DCGT070200 TH10 offers an uncoated carbide cutting edge formulated as a sharp universal grade for non-ferrous materials and applications where reduced cutting forces are required. The geometry produces predictable chips and a consistent surface quality on softer alloys; the single-sided chipbreaker directs chip flow to reduce re-cutting while the clean edge avoids coating build-up that can raise cutting temperatures. For operations prioritising low spindle load and fine finishes, this grade delivers tangible process advantages with minimal post-process work. ISO geometry and secure clamping for repeatable turning The insert’s ISO rhombic form and a 55° cutting angle provide a versatile approach angle suited to many turning tasks, while a 7° clearance ensures reliable cutting relief. The plate is manufactured to ISO series tolerances so interchangeability with compatible holders is straightforward: compatibility depends on form, relief angle, tolerance class, mounting, size and thickness. The presence of a centre hole with a cylindrical bore and a one-sided countersink (40°–60°) enables secure clamping in standard toolholders, and the 2.38 mm plate thickness supports stable positioning and good edge support during interrupted cuts. Designed to improve throughput and simplify grade choice Selecting a sharp, uncoated grade like TH10 helps to reduce cutting forces and can increase feed or reduce machine load without sacrificing surface quality, contributing to higher production efficiency in appropriate material groups. The ISO format simplifies stockkeeping and replacement routines; matching the one-sided chipbreaker and grade to material and workpiece rigidity optimises chip control and tool life. For applications beyond straightforward turning—such as less rigid setups or specialised alloys—evaluation of holder rigidity and process parameters is recommended to exploit the insert’s strengths fully. For application-specific advice and to order genuine Tungaloy ISO turning inserts such as the DCGT070200 TH10, contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) for technical guidance and supply options Technical data Article number: 6802765 Manufacturer SKU: TUN6802765 Vendor SKU: 6802765-Tungaloy Designation: DCGT070200 Manufacturer: Tungaloy Core dimensions ISO code: 070200 Cutting angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 07 Materials & special features Cemented carbide material Grade: TH10 (uncoated) Plate form: rhombic Chipbreaker: one-sided Hole: with centre hole; cylindrical bore + one-sided countersink (40°–60°) Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, mounting, size and thickness FAQ What materials is this insert best suited for? The DCGT070200 TH10 insert is optimised for non‑ferrous materials and similar applications where a sharp, uncoated edge reduces cutting forces and produces clean surfaces. How does the chipbreaker affect machining? The one-sided chipbreaker on the DCGT070200 controls chip formation to promote stable chips and minimise re-cutting, improving surface finish and process reliability in suitable applications. Which holders are compatible with this ISO insert? Compatibility is achieved with holders that match the insert’s rhombic form, clearance angle, tolerance class, mounting method, size (07) and thickness (2.38 mm); standard ISO turning holders and appropriate boring bars are typical choices. Is the insert suitable for interrupted cuts or heavy machining? The 2.38 mm thickness and secure centre-clamp arrangement provide good edge support, but performance in interrupted or heavy cuts depends on holder rigidity and setup; evaluate the complete system before high-load applications. What is the significance of the uncoated grade TH10? Grade TH10 is a sharp, universal uncoated carbide suited to tasks where low cutting forces and clean surfaces are priorities; it avoids coating-related build-up and performs well on softer alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, sharp TH10 uncoated carbide, and precise geometry for reliable turning performance and efficient setup; order directly via Metav Werkzeuge or consult Metav Werkzeuge specialists for application advice. DCGT070200 TH10 — uncoated carbide, rhombic 07 indexable insert for turning (Tungaloy) A DCGT070200 TH10 indexable insert engineered for ISO‑standard turning, suitable for external and internal operations where low cutting forces and clean surface finishes are required. ISO‑specified turning insert Uncoated carbide for low cutting forces Rhombic 07 shape, 55° approach angle Cylindrical hole with one‑side countersink Predictable seating and secure holder compatibility for faster setups The ISO conformity of this insert guarantees consistent fitment with matching toolholders: form, clearance angle, tolerance class, fastening and thickness determine compatibility. The rhombic 07 geometry combined with a 55° approach angle results in stable tool engagement for a wide range of external and internal turning tasks. Predictable seating reduces setup time and minimises vibration, which in turn supports repeatable part quality and fewer scrapped components. Sharp TH10 grade for low cutting forces and clean surfaces The TH10 uncoated carbide grade provides a sharp, universal cutting edge particularly effective on non‑ferrous materials and operations that favour a non‑coated cutting edge. The absence of a coating helps maintain low cutting forces, producing cleaner chip formation and improved surface integrity without the thermal buildup sometimes associated with coated grades. For applications prioritising surface finish over aggressive wear resistance, this grade offers an economical balance of performance and cost‑effectiveness. Chip control and secure clamping for consistent machining A single‑sided chipbreaker and a cylindrical hole with one‑side countersink (40°–60°) aid reliable clamping and directed chip flow during turning. The insert’s 2.38 mm thickness contributes to rigidity while the 7° clearance reduces rubbing on the flank, which helps preserve edge sharpness and prolongs effective cutting life under appropriate cutting conditions. Selecting the correct chipbreaker and grade according to material and machine stability ensures efficient material removal and predictable tool change intervals. For tailored application advice or immediate availability of the DCGT070200 TH10 from Tungaloy, contact Metav Werkzeuge (info@metav-werkzeuge.com | +49 2822 7131930) to confirm holder compatibility and delivery options. Technical data Article number: 6802772 Manufacturer SKU: TUN6802772 SKU: 6802772-Tungaloy Designation: DCGT070200 Model series: ISO-Drehwendeschneidplatten Application: Turning Material: uncoated carbide Grade: TH10 Core specifications Plate size: 07 Plate form: rhombic Thickness: 2.38 mm Clearance angle: 7° Cutting angle: 55° Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Design & features Single‑sided chipbreaker ISO‑specified geometry for holder compatibility Sharp universal grade for non‑ferrous materials Suitable for external and internal turning FAQ Which materials are best machined with this insert? The DCGT070200 TH10 insert from Tungaloy is optimised for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surfaces; the TH10 grade is a universal, sharp choice for such tasks (SKU: 6802772‑Tungaloy). How is holder compatibility determined for this insert? Compatibility is governed by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the toolholder ensures secure clamping and repeatable performance with the DCGT070200 TH10. What does the cylindrical hole with one‑side countersink provide? The cylindrical hole plus one‑side countersink (40°–60°) enables precise axial positioning and secure screw fastening, which improves clamping reliability and stabilises the insert during heavier cuts. Is the TH10 grade suitable for finishing operations? Yes; the TH10 uncoated grade promotes low cutting forces and clean chip formation, making it well suited to finishing passes that demand a superior surface finish. Can this insert be used for both external and internal turning? The ISO‑formatted geometry and rhombic 07 shape of this insert make it appropriate for both external and internal turning applications when paired with the correct holder and suitable cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated carbide TH10 grade and ISO compatibility for low cutting forces and clean surface finishes; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGT 070200 TH10 DCGT070200 Tungaloy turning insert — 55° rhomboid ISO turning insert, uncoated carbide DCGT070200 TH10 Tungaloy insert offers a 55° rhomboid geometry for external and internal turning, optimised for low cutting forces and excellent surface quality on non-ferrous materials. ISO rhomboid 07 format, 55° cutting angle Uncoated carbide for low cutting forces Single-sided chipbreaker for clean finish Compatible with standard ISO holders High-efficiency turning with reduced cutting forces The combination of a 55° cutting geometry and the sharp TH10 uncoated carbide grade gives stable cutting with reduced power requirements. For operations where low cutting forces and a clean surface are essential — such as machining aluminium, brass and other non-ferrous alloys — this insert provides consistent performance. The rhomboid 07 form and a 7° relief angle reduce rubbing at the flank, improving tool life under appropriate feeds and speeds while supporting a fine surface finish. Seamless integration into ISO tool systems Designed as part of the ISO-series inserts, compatibility is defined by shape, relief angle, tolerance class, fastening method, size and thickness. The insert fits standard locators and clamping systems when used with a matching holder, shim or clamping set and the correct replacement screws. A cylindrical hole with a single-sided countersink (40°–60°) ensures reliable seating and repeatable positioning, making setup straightforward in both turret and gang-tool applications. Grade choice and chip control for clean results The TH10 grade is an uncoated, sharp, universal choice intended for non-ferrous materials and for situations where an uncoated cutting edge helps to maintain low cutting forces and a clean surface. The single-sided chipbreaker promotes predictable chip formation; selecting the appropriate chipbreaker and grade for the job reduces rework and minimises machine stoppages. This insert is therefore well suited to both external and internal turning tasks where surface quality and dimensional stability are priorities. Practical handling and system considerations With a plate thickness of 2.38 mm and size designation 07, the insert provides a compact, rigid cutting edge that works well in confined tool pockets. The production system for these inserts typically comprises the ISO insert, a matching external holder or boring bar, an underlay/clamping kit and spare screws. Correct selection of holder and clamping torque ensures repeatable seating and extends the useful life of the cutting edge while supporting productive machining and stable chip formation. Contact Metav Werkzeuge for tailored advice on selecting the correct holder and chipbreaker for Tungaloy turning inserts or order the DCGT070200 TH10 insert directly via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802770 Manufacturer SKU: TUN6802770 Model series: ISO-Drehwendeschneidplatten ISO designation: 070200 Label: DCGT070200 TH10 Tungaloy-Wendeplatte Facts Shape: rhomboid, size 07 Cutting angle: 55° Relief angle: 7° Plate thickness: 2.38 mm Hole: with hole; cylindrical hole + single-sided countersink 40°–60° Special features Material: uncoated carbide Grade: TH10 (sharp universal grade for non-ferrous materials) Chipbreaker: single-sided Application: external and internal turning System requirement: compatible ISO holder, underlay/clamp set and replacement screws Compatibility determined by shape, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The DCGT070200 TH10 insert is designed primarily for non-ferrous materials such as aluminium and brass; the TH10 uncoated grade supports low cutting forces and clean surface finishes. How does the hole and countersink affect mounting stability? The cylindrical hole with a single-sided countersink (40°–60°) on the insert ensures secure, repeatable positioning when clamped in a compatible ISO holder, improving assembly stability and repeatability. Which holders are compatible with this ISO insert? Compatibility depends on the holder pocket matching the insert’s shape, relief angle, tolerance class, fastening type, size 07 and thickness 2.38 mm; use holders specified for ISO rhomboid DCGT inserts. When should one choose an uncoated grade like TH10 over a coated grade? Choose an uncoated grade such as TH10 when low cutting forces and a sharp edge are required to achieve a clean surface on non-ferrous materials or when coated edges might build up material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070200 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO-standard rhombic geometry, a sharp TH10 uncoated carbide cutting edge and a low 7° clearance angle to achieve low cutting forces and clean surface finishes in non-ferrous turning operations — order the DCGT070200 directly via Metav Werkzeuge or ask our consultants for application advice. DCGT 070200 TH10 Tungaloy indexable turning insert for turning — rhombic 07 (55°), uncoated carbide DCGT 070200 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning applications where low cutting forces and a clean finish are required ISO-standard rhombic 55° geometry Uncoated carbide grade TH10 for low cutting forces Single-sided chipbreaker with cylindrical hole Consistent geometry for secure clamping and repeatable results The insert uses an ISO-standard form and tolerance set that simplifies selection and replacement in compatible toolholders. The rhombic 55° geometry, combined with the 07 size and a plate thickness of 2.38 mm, ensures stable positioning in most standard external holders and boring bars; compatibility depends on form, clearance angle (7°), tolerance class, clamping method, size and thickness. This standardisation reduces setup time and supports repeatable machining results across batches, making the component suitable for production environments that prioritise predictable tool life and minimal adjustment. Lower cutting forces and improved surface quality for non‑ferrous work The sharp TH10 uncoated carbide grade is formulated as a universal cutting edge for non‑ferrous materials and operations that benefit from an uncoated cutting face. An uncoated carbide edge typically produces lower cutting forces and reduces built-up edge on soft or ductile workpieces, which leads directly to cleaner surface finishes and reduced rework. The single-sided chipbreaker concentrates chip control on the active flank to aid evacuation and reduce chatter, while the uncoated edge supports easier post‑process sharpening if required. Practical handling and hole design for reliable seating and coolant access A cylindrical hole with a single‑side countersink (40°–60°) provides straightforward clamping and ensures consistent seating in compatible screws and pads. The insert is single-sided, which means only one active cutting edge per side but simplifies indexing and inspection. The combination of rhombic shape, the hole style and the 55° principal cutting angle make the insert suitable for versatile turning tasks, from profiling to light finishing passes. For integration into the tool system, use the matching ISO holder or boring bar along with the correct backing plate, clamp set and replacement screws. Contact Metav Werkzeuge today to discuss how the Tungaloy TH10 insert (DCGT 070200 TH10) can be integrated into current turning setups, or request precise compatibility checks and cutting data from our technical advisors at Metav Werkzeuge — info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: 6802768 SKU: 6802768-Tungaloy Manufacturer SKU: TUN6802768 Model series: ISO-Drehwendeschneidplatten Core technical figures Plate designation: DCGT070200 Size: 07 Major angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Hole: with cylindrical hole + single-side countersink (40°–60°) Designs and special features Material: carbide (uncoated) Grade: TH10 Chipbreaker: single-sided Plate shape: rhombic Application: turning (external and internal) ISO-standard insert FAQ What work materials is this insert best suited for? The DCGT 070200 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated cutting edge promotes low cutting forces and a clean surface finish. How does the hole and countersink affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) on the insert ensures reliable seating in standard clamping systems, improving repeatability when using the correct ISO holder and clamp set. Can this insert be used for finishing passes? Yes, the sharp TH10 uncoated carbide edge is suited to light finishing operations that value low cutting forces and reduced tendency for built‑up edge, particularly on softer alloys. What must be checked for holder compatibility? Compatibility is determined by insert form, clearance angle (7°), tolerance class, clamping method, size and thickness; ensure the holder matches the ISO designation and physical dimensions. Is the material specification and grade indicated on the product? Yes, the insert is supplied as an uncoated carbide grade TH10, specified in the product designation and technical data Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 AH725 Wendeplatten - Tungaloy
Take advantage of an ISO‑standard, PVD‑coated AH725 grade that combines reliable chip control with broad material capability for stable turning operations; order directly via Metav Werkzeuge or consult our team for application support. DCGT070201 AH725 Tungaloy indexable turning insert — ISO rhombic, PVD‑coated carbide for turning DCGT070201 AH725 Tungaloy is an ISO‑standard rhombic indexable insert designed for external and internal turning applications in workshop and production environments. ISO rhombic insert DCGT070201 AH725 PVD‑coated carbide for steel and stainless steel 7° relief angle with 0.1 mm corner radius Central hole with cylindrical bore and countersink Proven process reliability from PVD‑coated AH725 The PVD‑coated grade AH725 offers a balance between toughness and wear resistance that supports fluctuating workpiece materials and smaller tool assemblies. The coating improves surface hardness and heat resistance, which in turn enhances tool life and reduces the risk of built‑up edge when machining both steel and stainless steels. For production runs where material mixes or demanding part tolerances occur, this coated carbide solution provides more consistent cycle times and fewer tool changes, supporting a smoother workflow and predictable output. Geometry engineered for accurate turning and repeatable finishes The rhombic plate form with a nominal 55° included angle and a 7° relief angle yields a reliable cutting edge engagement and controlled chip flow. The 0.1 mm corner radius helps produce a defined edge profile while limiting cutting forces for thin‑walled or delicate components. Compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening method, size and plate thickness; using an appropriately matched holder ensures that the insert’s geometry converts directly into repeatable dimensional accuracy and improved surface quality on turned parts. System integration and application guidance for efficient use The insert functions as part of an indexable system comprising the ISO‑form plate, a matching external holder or boring bar, a locator/locking set and replacement screws. The single‑sided chipbreaker design is intended to control chips during standard turning operations and to simplify regrinding or indexing procedures. The grade is particularly suitable where process security is paramount: it tolerates minor variations in feed and speed better than uncoated grades and is a practical choice for jobbers and production shops handling a mix of steel and stainless steels. For less experienced staff, the concept of an indexable insert means quick edge renewal by rotation rather than complex regrinding, reducing downtime between parts. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts or request technical datasheets via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6857014 Manufacturer SKU: TUN6857014 Designation: DCGT070201 AH725 Tungaloy‑indexable insert Manufacturer: Tungaloy Facts Thickness: 2.38 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 55° Size: 07 Special features Coating: AH725 (PVD) Material: carbide Chipbreaker: single‑sided Plate form: rhombic Hole style: cylindrical hole + one‑sided countersink (40°–60°) Typical application: external and internal turning Model series: ISO indexable turning inserts FAQ What materials is this insert suitable for? The DCGT070201 AH725 Tungaloy insert is designed for machining steel and stainless steels, offering stable chip formation across these materials. How does the AH725 coating benefit production runs? The AH725 PVD coating on the insert increases wear resistance and thermal stability, which extends edge life and supports consistent cycle times during longer or mixed‑material runs. What does the 0.1 mm corner radius mean for part quality? A 0.1 mm corner radius provides a fine, repeatable edge profile that improves surface finish while keeping cutting forces moderate, suitable for precision turning and thin‑walled components. Is the insert compatible with all ISO DCGT holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the insert follows ISO geometry, so matching an ISO‑rated DCGT holder delivers correct seating and clamping. How is the insert mounted and secured? The plate is usually mounted with a suitable clamp/locating kit and screw; the central hole with a cylindrical bore and one‑sided countersink allows standard ISO‑style fastening for secure seating. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070201 J740 Wendeplatten - Tungaloy
The combination of the J740 carbide grade and ISO rhombic geometry provides a balance of wear resistance and edge stability for productive turning. Compatible mounting features — including a cylindrical hole with a single‑sided countersink and a 0.1 mm corner radius — ensure reliable clamping and repeatable results; order directly via Metav Werkzeuge or consult our advisors for application support. DCGT 070201 J740 turning indexable insert (ISO 070201) — Tungaloy The DCGT070201 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a robust carbide composition and a balanced chip control solution for general turning applications. Tungaloy J740 grade for wear resistance Rhombic 07 geometry, 55° cutting angle 0.1 mm corner radius for fine finishing Cylindrical hole with single‑sided countersink High productivity through wear‑resistant carbide and J740 composition The J740 designation denotes a Tungaloy carbide grade developed to combine wear resistance with sufficient toughness for many turning tasks. In practice, this means longer edge life under intermittent cutting and stable flank behaviour during continuous cuts. By using a grade that suppresses abrasive wear while still resisting chipping, the insert supports more productive cycles and reduces the frequency of index changes. The choice of this composition is particularly useful where consistent tool performance contributes directly to process economy and predictable cycle times. Secure mounting and ISO compatibility for predictable results Designed to ISO specifications, the insert’s form, clearance angle (7°), tolerance class, size and thickness determine holder compatibility. The rhombic 07 format combined with a 55° included angle and a cylindrical hole with a one‑sided countersink (40°–60°) enables secure clamping in many standard external holders or boring bars. The plate thickness of 2.38 mm and the 0.1 mm corner radius ensure the cutting edge sits accurately in the pocket and that clamping forces are transmitted evenly, which reduces micro‑movement and maintains dimensional consistency across serial production. Practical guidance on applications and chip control This insert is intended for turning operations where chip formation and edge stability must be balanced. The one‑sided chipbreaker requires selection according to workpiece material and the chosen cutting parameters: a chipbreaker optimised for intermittent cuts and mixed materials will improve evacuation and reduce rework. While the chemistry and microstructure of the grade provide broad usability, pairing the insert with a matching chipbreaker and appropriate cutting data yields the best surface finish and tool life, particularly in general‑purpose machining where versatility matters. System setup, replacement parts and operational benefits An efficient system comprises the ISO insert, a matching external holder or boring bar, a supporting shim or clamping set, and replacement screws. Using standardised replacement components simplifies maintenance and reduces downtime. The insert’s carbide substrate and J740 characteristics promote stable edge geometry, which in turn eases process monitoring and reduces scrap. For shops aiming at steady, reproducible results, integrating this insert into an ISO‑based toolholding strategy supports predictable service intervals and clear spare‑part lists. Contact Metav Werkzeuge for application advice on the Tungaloy J740 DCGT070201 insert and to discuss compatible holders or clamping solutions; Metav Werkzeuge can provide technical consultation and supply the correct items for the intended turning tasks Technical data Article number: 6802773 SKU: 6802773-Tungaloy Manufacturer article number: TUN6802773 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Size: 07 Thickness: 2.38 mm Corner radius: 0.1 mm Clearance angle: 7° Cutting angle (included): 55° Materials & special features Material: carbide Grade: J740 Shape: rhombic Hole: cylindrical with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: turning FAQ What machining operations is this insert intended for? The DCGT070201 insert is intended for external and internal turning operations; the J740 grade complements the geometry for balanced wear resistance and edge stability during turning. Which dimensions are critical when selecting a holder for this insert? Holder compatibility is determined by shape, clearance angle, tolerance class, fastening, size (07) and thickness (2.38 mm); the cylindrical hole and countersink must match the clamping system. How does the J740 grade influence tool life and performance? Tungaloy’s J740 grade is formulated to provide a compromise between hardness and toughness, resulting in improved wear resistance and stable cutting edges that support longer indexed life under typical turning loads. Can the insert be used for fine finishing with a small corner radius? Yes — the 0.1 mm corner radius is suitable for fine finishing passes and helps achieve a finer surface while maintaining acceptable edge strength for general turning. What auxiliary components are needed to install the insert correctly? A matching ISO external holder or boring bar, a supporting shim/clamping set and appropriate replacement screws are required to ensure secure, repeatable clamping and stable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 J740 Wendeplatten - Tungaloy
Reliable wear resistance from the Tungaloy J740 grade combined with ISO conformity, a 0.1 mm corner radius and a secure clamping hole deliver consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT 070201 J740 — ISO rhombic turning insert, 55° (Tungaloy) The DCGT 070201 J740 is an ISO‑standard rhombic indexable insert designed for external and internal turning, equipped with a single‑sided chipbreaker for controlled swarf formation. ISO rhombic insert DCGT 07, 55° cutting angle Grade J740 carbide for wear resistance and toughness Cylindrical hole with single‑side countersink 40°–60° 0.1 mm corner radius; thickness 2.38 mm Consistent cutting performance through material and geometry The combination of carbide construction and the J740 Tungaloy grade provides a balance of wear resistance and edge stability that supports repeatable turning operations. The rhombic geometry with a 55° cutting angle yields good access for both external and internal contours while the 0.1 mm corner radius helps to fuse surface quality with tool life. For machining processes that demand predictable tool behaviour, this insert reduces variability and maintains component tolerances. Secure fitting and ISO compatibility for flexible tool setup As an ISO‑standard insert, the item fits a wide range of holders when matched for shape, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a single‑side countersink (40°–60°) ensures reliable clamping and repeatable seating in the pocket, while the 7° clearance angle supports consistent chip evacuation. When configuring tooling systems, check holder compatibility to preserve the insert’s designed cutting geometry and clamping integrity. Improved chip control and suited applications The single‑sided chipbreaker geometry is intended to direct chips and reduce built‑up edge in many common turning scenarios. Combined with the Tungaloy grade, the insert is suitable for a variety of turning tasks; choose the chipbreaker type and grade variant according to workpiece material and machining stability. This approach enhances productivity by lowering downtime for edge dressing and by enabling steadier feed rates where surface finish and component accuracy matter. Practical guidance for selection and use Select the insert grade and chipformer according to the workpiece alloy, required surface finish and machine rigidity. The 07 size and 2.38 mm thickness make the insert suitable for general turning applications, from finishing to moderate roughing, when paired with an appropriate holder and clamping set. For process tuning, consider tooling stiffness, feed and depth of cut to protect the cutting edge and extend service intervals; routine visual checks for flank wear and chip shape give clear indicators for optimisation. If additional data or process parameters are required, technical support is available to advise on the best combination for a given application. For dependable turning performance with Tungaloy’s J740 grade, contact Metav Werkzeuge for application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802776-Tungaloy Manufacturer item no.: 6802776 Manufacturer SKU: TUN6802776 Model series: ISO turning indexable inserts Material: Carbide Grade: J740 Shape: Rhombic (DCGT) Facts Size: 07 ISO designation: 070201 Thickness: 2.38 mm Corner radius: 0.1 mm Cutting angle: 55° Clearance angle: 7° Hole: with hole Special features Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑standard compatibility for holders For external and internal turning Tungaloy grade J740 for wear resistance and edge stability FAQ What materials is this insert suitable for? The DCGT 070201 J740 turning insert (Tungaloy, SKU 6802776‑Tungaloy) is designed to cover a broad range of turning tasks; selection of the J740 grade and the single‑sided chipbreaker should be matched to the specific workpiece material and machining mode. How is the insert secured in the holder? This rhombic indexable insert features a cylindrical hole with a single‑side countersink (40°–60°) to ensure stable clamping in compatible holders and repeatable seating for consistent cutting geometry. What is the benefit of the 0.1 mm corner radius? The 0.1 mm corner radius helps to combine improved surface finish with controlled edge strength, offering a compromise between fine finishing and resistance to minor edge chipping during turning. Can the insert be used for internal turning? Yes, the DCGT 070201 J740 insert is suitable for both external and internal turning applications when installed in a correctly matched holder and used with appropriate machining parameters. What does the J740 designation indicate? The J740 designation refers to the Tungaloy grade of carbide chosen to balance wear resistance, toughness and cutting‑edge stability for reliable turning performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070201 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and a cermet cutting edge for consistent production results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGT 070201 NS9530 indexable turning insert for turning by Tungaloy — uncoated cermet, 7° relief The DCGT070201 NS9530 is an ISO‑standard indexable insert for precision turning, designed for fine finishing of steel in continuous‑cut operations with a rhombic form and a small corner radius. ISO DCGT 070201 geometry, compatible holders Uncoated cermet grade NS9530 for fine finish Low cutting forces for continuous turning Cylindrical hole with single-sided countersink (40°–60°) Consistent fine finishing with a cermet cutting edge The insert delivers dependable finishing characteristics through its uncoated cermet specification NS9530, which provides a sharp cutting edge and reduced built‑up edge tendency. For finishing operations on steel, this combination yields a measurable improvement in surface quality while keeping cutting forces low, which helps to maintain machine and part stability. The small 0.1 mm corner radius supports fine detail and tight tolerances, making the insert suitable for applications where surface integrity and dimensional accuracy are critical. Designed for secure clamping and ISO interchangeability Manufactured to the ISO DCGT geometry, the insert fits standard holders when the form, relief angle, tolerance class, fastening and size are matched. The rhombic shape and 2.38 mm thickness contribute to stable seat contact, while the cylindrical hole with a single‑sided countersink (40°–60°) ensures reliable fastening and repeatable positioning. These characteristics reduce setup variation and enable quick index changes, which improves throughput and simplifies tool inventory management in production environments. Process efficiency and material suitability for turning Optimised as a finishing grade for steel, the cutting specification favours continuous cutting and small depth‑of‑cut strategies; the result is predictable tool behaviour and prolonged edge life under the intended conditions. The low cutting forces associated with this grade reduce vibration and energy demand, which can translate into improved cycle times and lower rework rates. When combined with an appropriate holder and cutting data, the insert supports an efficient machining process with reproducible surface finish and dimensional control. Practical considerations for integration and use The insert is intended for external and internal turning where a fine surface and low force loadings are required. Compatibility to a chosen holder depends on matching the DCGT form and ISO code 070201, the 7° relief, the hole form and the thickness. Selection of a matching single‑sided chipbreaker and the correct feed and speed parameters will maximise the performance of the NS9530 grade and preserve the integrity of the cutting edge during continuous operations. For precise finishing tasks with Tungaloy’s DCGT 070201 NS9530 insert, contact Metav Werkzeuge for availability and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and cutting data. Technical data Article number: 6998045 Manufacturer SKU: TUN6998045 Model series: ISO‑Drehwendeschneidplatten Brand: Tungaloy Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.1 mm Relief angle: 7° Insert angle: 55° Special features Uncoated cermet grade NS9530 Material: cemented carbide Rhombic plate form Cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker ISO‑standard DCGT geometry for turning FAQ What applications suit this insert best? This insert is tailored for finishing operations in turning, especially continuous cuts on steel where a sharp cermet NS9530 edge provides superior surface finish. Is the DCGT070201 compatible with standard DCGT holders? Yes, the DCGT070201 conforms to ISO geometry; compatibility depends on matching form, relief, thickness and fastening type for the holder. What is the advantage of an uncoated cermet grade like NS9530? Uncoated cermet NS9530 offers a very sharp edge and low cutting forces, delivering improved surface finish and stable performance in finishing cuts. Which chipbreaker type is fitted on the insert? The insert features a single‑sided chipbreaker optimised for continuous finishing operations and small depths of cut. How does the small corner radius affect machining? A 0.1 mm corner radius produces finer surface detail and better dimensional accuracy, but requires appropriate feeds to avoid edge overload. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 NS9530 Wendeplatten - Tungaloy
Product data inconsistency: the tool is recorded as 'Hartmetall' while the cutting material is specified as an uncoated cermet; unable to generate a reliable product description due to conflicting information between the recorded tool type and the specified cutting material, which raises concerns about the accuracy and reliability of the provided data, making it difficult to ensure that the product description aligns with the actual characteristics of the tool, potentially leading to confusion or misrepresentation in documentation, catalogues, or customer-facing materials, and highlighting the need for a thorough review and correction of the data to maintain consistency and clarity in product information.
DCGT 070201 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, ISO compatibility and easy clamping to maintain steady productivity in turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for tailored application advice. DCGT 070201 SH7025 — ISO turning insert by Tungaloy DCGT 070201 SH7025 is a coated cemented carbide turning insert for ISO-standard external and internal turning applications Coated carbide grade SH7025 for edge stability ISO rhombic insert, size 07, form DCGT 0.1 mm corner radius for precise surface finish Cylindrical hole with single-side countersink 40°–60° Stable cutting performance under varying engagement The DCGT070201 SH7025 indexable insert combines a coated cemented carbide construction with a grade engineered for edge stability, making it suitable for turning tasks where engagement conditions change frequently. The SH7025 grade is described as a tough, edge-durable composition, which helps to delay flank wear and maintain dimensional accuracy over longer tool life. For users working with short overhangs or smaller tool bodies, the improved toughness reduces the risk of chipping, thus contributing to consistent cycle times and fewer in-process interruptions. Geometry tuned for reproducible surface quality A rhombic 07 profile and a 0.1 mm corner radius deliver a balance between strength and finish capability. The insert’s geometry, including the 7° relief angle, ensures a stable cutting edge contact and controlled cutting forces, which supports repeatable surface roughness on external and internal diameters. The moderate included angle and precise corner radius make the insert appropriate for light finishing passes as well as general turning, where a predictable tool path and consistent results are priorities. ISO standardisation simplifies holder selection and reduces setup time. Practical clamping and chip control for efficient handling Mechanical compatibility is ensured by standard form, tolerance class and mounting dimensions; the insert features a cylindrical hole with a single-side countersink (40°–60°) and a single-sided chipbreaker to promote secure clamping and effective chip control. The 2.38 mm plate thickness contributes to rigidity in the tool pocket, while the central hole style allows straightforward fastening with standard screws. Taken together, these design choices reduce index-change time and help maintain stable processes across batches, increasing overall workshop throughput. For applications that demand reliable edge life and ISO interchangeability, contact Metav Werkzeuge for specification matching and order support — Metav Werkzeuge can advise on holders and operating parameters to maximise the performance of the Tungaloy SH7025 insert. Technical Data Article number: 6967468 SKU: 6967468-Tungaloy Manufacturer SKU: TUN6967468 Label: DCGT070201 SH7025 Tungaloy-Wendeplatte Facts Corner radius: 0.1 mm Relief angle: 7° Included/cutting angle: 55° Plate thickness: 2.38 mm Plate size: 07 Special features Coating / grade: SH7025 Material: cemented carbide Plate form: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Model series: ISO turning inserts Typical use: external and internal turning FAQ What materials can this insert process effectively? The DCGT070201 SH7025 insert is a coated cemented carbide grade designed for broad applicability in turning; it is especially suited to general-purpose steel machining and applications where edge stability and toughness are required. How does the SH7025 grade affect tool life? The SH7025 coating and substrate combination increases resistance to edge degradation, which in practice translates into longer intervals between index changes and more consistent dimensional control during production. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions for the DCGT form and size 07; compatibility depends on matching holder form, relief angle, tolerance class, mounting and thickness, as with other ISO-standard indexable systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070201 SH7025 Wendeplatten - Tungaloy
DCGT070201 SH7025 provides a robust combination of coated carbide grade SH7025 and a 55° rhombic geometry, delivering reliable edge stability and predictable chip control for general turning operations; order directly via Metav Werkzeuge or consult the specialists for machining recommendations. DCGT070201 SH7025 — ISO rhombic turning insert, coated carbide, 55° | Tungaloy DCGT070201 SH7025 is an ISO‑standard rhombic turning insert designed for both external and internal turning applications, offering a tough coated carbide grade for stable cutting edges and variable engagement conditions. Coated carbide SH7025 for stable edges 55° rhombic geometry for versatile turning 0.1 mm corner radius for fine finishing Cylindrical hole with countersink for secure mounting Predictable performance through material and geometry The insert combines a coated carbide substrate with the SH7025 grade to yield consistent wear resistance and a stable cutting edge under changing cut conditions. The 55° rhombic geometry reduces cutting forces in many turning tasks, while the 0.1 mm corner radius supports improved surface finish for detail work. This configuration is particularly efficient in short‑to‑medium engagement scenarios, where tool life and process stability have a direct impact on cycle times. Practical compatibility and mounting for production use Designed to ISO specifications, the insert’s fit depends on form, clearance angle, tolerance class, fastening, size and thickness, ensuring interchangeability with matching holders. The cylindrical hole with a one‑sided countersink (40°–60°) guarantees secure clamping and repeatable positioning in an appropriate toolholder or boring bar. The 2.38 mm thickness and size 07 make the insert suitable for compact toolholders and situations where a low‑profile, rigid set‑up is required. Application range and process advantages Suited for external and internal turning, the grade and chipbreaker selection allow adaptation to the workpiece material and machining conditions. The one‑sided chipbreaker supports reliable chip formation when paired with the right feed and stability, helping to reduce interruptions. For operations requiring a balance of edge life and surface quality, this insert offers a productive solution that optimises throughput and reduces rework. For consistent edge stability and machining reliability with Tungaloy tooling, contact Metav Werkzeuge to secure the DCGT070201 SH7025 insert or to discuss optimal holder and chipbreaker combinations Technical data Article number: 7743495-Tungaloy Manufacturer item number: 7743495 Manufacturer SKU: TUN7743495 Model series: ISO turning inserts Material: carbide Facts Thickness: 2.38 mm Corner radius: 0.1 mm Clearance (rake) angle: 7° Insert size: 07 Main angle: 55° SKU: 7743495-Tungaloy Special features Coated carbide grade SH7025 Rhombic insert form (55°) Cylindrical hole with one‑sided countersink (40°–60°) One‑sided chipbreaker ISO‑standard turning insert Suitable for external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCGT070201 SH7025 insert is designed as a versatile coated carbide grade suitable for a broad range of turning tasks; the grade performs well where a tough, edge‑stable insert is required. How is the insert mounted and secured? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) for positive and repeatable clamping in compatible ISO toolholders and boring bars. What surface finish can be expected with the 0.1 mm corner radius? A 0.1 mm corner radius supports finer surface finishes on turned parts while maintaining edge strength; the actual finish depends on feed, speed and workpiece material. Is this insert suitable for small‑diameter toolholders? Yes, the combination of size 07 and a thickness of 2.38 mm allows use in compact holders and short overhang set‑ups where rigidity is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com