DCGT 070202 SH7025 Wendeplatten - Tungaloy
Combine robust cutting performance with a compact ISO geometry and a tough coated carbide grade for consistent turning results; request tailored cutting data or order the insert via Metav Werkzeuge. DCGT070202 SH7025 — DCGT Indexable Turning Insert for Turning (55°) by Tungaloy The DCGT070202 SH7025 is an ISO‑format, rhombic indexable insert designed for external and internal turning, optimised for small‑tool applications and varying engagement conditions. Coated cemented carbide grade SH7025 Rhombic 07 form, 55° included angle Single‑side chipbreaker for stable cutting Cylindrical hole with one‑side countersink 40°–60° Increased productivity through optimised geometry and grade The combination of the SH7025 coated cemented carbide and the ISO rhombic geometry delivers a balance of edge stability and toughness that supports consistent metal removal rates. The 55° included angle and the 0.2 mm corner radius produce reliable cutting edge strength for interrupted cuts and variable depths of cut, while the grade’s toughness reduces chipping when using smaller tools. These characteristics translate into measurable process stability and fewer insert changes during production. Secure clamping and machine compatibility for predictable results A secure mechanical fit is guaranteed by the insert’s cylindrical hole with one‑sided countersink (40°–60°) and the standard DCGT form; clamping force is distributed via the countersunk seating to avoid movement under load. Compatibility with holders depends on form, free clearance (7°), tolerance class, fastening, size and thickness — factors that ensure the insert seats correctly and delivers repeatable results across suitable toolholders and boring bars. Practical application advice and ease of selection The single‑side chipbreaker is designed for general turning where chip control and tool life matter; selecting the appropriate chipbreaker and grade for the workpiece and machining conditions is decisive. The insert’s 2.38 mm thickness and size 07 make it suitable for short overhangs and compact tool geometries, supporting rigidity in constrained setups. When matched to the correct holder and cutting parameters, the insert provides predictable surface finish and tool life, simplifying process planning. Contact Metav Werkzeuge for availability, tailored cutting recommendations and application support for the Tungaloy DCGT070202 SH7025 insert — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 7743490 Manufacturer SKU: TUN7743490 Seller SKU: 7743490-Tungaloy Model series: ISO turning indexable inserts Core specifications Included angle: 55° Corner radius: 0.2 mm Thickness: 2.38 mm Free clearance: 7° Size: 07 Countersink angle: 40°–60° Design and special features Shape: rhombic (DCGT) Chipformer: single‑side chipbreaker Hole: cylindrical with one‑sided countersink Material: coated cemented carbide (SH7025) Application: turning (external and internal) Compatibility: determined by form, free clearance, tolerance, fastening, size and thickness FAQ What turning operations is this insert intended for? The DCGT070202 SH7025 indexable insert is intended for external and internal turning operations, particularly where compact tool setups and variable entries require a stable cutting edge. Which workpiece materials are best matched to the SH7025 grade? The SH7025 coated cemented carbide is a tough, edge‑stable grade suited to a broad range of turning tasks; material‑specific chipbreaker and parameter selection are recommended for optimal results with cast iron, steel and alloyed materials. How can I ensure the insert fits my holder? Compatibility is ensured when the holder matches the DCGT form, the 7° free clearance, tolerance class, fastening method, the insert size and the 2.38 mm thickness; confirm these dimensions with the toolholder specification before assembly. What are the critical dimensions to note for setup? Key dimensions are the 55° included angle, 0.2 mm corner radius, 2.38 mm thickness, size 07 and the cylindrical hole with a one‑sided countersink at 40°–60°. Is this insert suitable for finishing passes? Yes; when combined with appropriate cutting data and a matching chipbreaker, the insert can be used for medium to finishing turning operations where edge stability and surface quality are required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070202 SH7025 Wendeplatten - Tungaloy
Benefit from a combination of SH7025 coated carbide for durable edge life, ISO‑standard rhombic 07 geometry for reliable compatibility, and a secure centre‑hole clamping design — order the insert directly via Metav Werkzeuge or request application advice from our consultants. DCGT070202 SH7025 Tungaloy turning insert — rhombic 07, 55° cutting angle DCGT070202 SH7025 is an indexable turning insert engineered for external and internal turning, offering a tough, edge‑stable grade suited to varied machining conditions ISO rhombic 07 geometry for stable cutting Tough SH7025 coated carbide for edge stability One-sided chipbreaker for controlled chip flow Centre hole with countersink for secure clamping Consistent edge life for precision turning The SH7025 grade is a coated carbide designed to deliver edge stability under fluctuating engagement conditions, which benefits shops running smaller tooling or frequent tool changes. With a 55° main cutting angle and a 0.2 mm corner radius, the insert excels where a balance between strength and surface finish is required. This geometry reduces the risk of premature edge chipping while maintaining acceptable roughness values, so confidence in cycle times and part tolerances increases without complex parameter changes. Designed for secure clamping and ISO compatibility Manufactured to ISO dimensions, the rhombic 07 format and the central hole with a cylindrical bore plus single‑sided countersink (40°–60°) ensure compatibility with matched holders and mounting systems. The 7° clearance angle supports reliable chip evacuation and reduces flank contact, while the 2.38 mm plate thickness provides the stiffness needed for stable cuts. The standardised form means straightforward replacement and predictable seating, simplifying tool management in production settings. Application guidance and process benefits A one‑sided chipbreaker gives controlled chip formation for a wide range of steels and mixed‑material batches; select the chipbreaker and grade according to workpiece material and machine stability for best results. The 0.2 mm corner radius supports finishing and semi‑finishing applications where slight radius reinforcement improves tool life without compromising geometry. Using this insert in a well‑matched holder reduces vibration, increases process security and supports consistent batch quality — a clear advantage for high‑mix, medium‑volume turning operations. Contact Metav Werkzeuge today for guidance on integrating Tungaloy turning inserts into production, or request a technical consultation by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability for specific applications Technical data Manufacturer article number: 6967470 SKU: 6967470-Tungaloy Model series: ISO‑turning indexable inserts Core dimensions Corner radius: 0.2 mm Plate thickness: 2.38 mm Cutting angle: 55° Clearance angle: 7° Plate size: 07 ISO designation: 070202 Materials & features Coating / grade: SH7025 Substrate: coated cemented carbide Chipbreaker: one‑sided Hole: centre hole with cylindrical bore and single‑side countersink (40°–60°) Shape: rhombic Application: turning (external and internal) FAQ What materials is the DCGT070202 SH7025 insert suitable for? The DCGT070202 SH7025 insert is a coated carbide grade intended for a broad range of steels and mixed‑material batches; select cutting data and holder stability according to the specific workpiece material. How does the SH7025 grade affect tool life? SH7025 is formulated for toughness and cutting‑edge stability, so the DCGT070202 insert shows improved resistance to chipping under variable engagement, extending effective tool life in interrupted or unstable cuts. How is the insert secured in the holder? The insert uses a centre hole with a cylindrical bore and a single‑side countersink for secure clamping; this design on the DCGT070202 ensures repeatable seating and reliable torque transmission in compatible holders. Which applications are best for a 0.2 mm corner radius? A 0.2 mm corner radius on this indexable insert is well suited to finishing and semi‑finishing passes where modest radius support improves surface finish and reduces edge stress without affecting part geometry. Can this insert be used for internal turning as well as external turning? Yes, the DCGT070202 is appropriate for both internal and external turning; choose the holder, chipbreaker and cutting parameters based on machinability, component stability and required surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 SH725 Wendeplatten - Tungaloy
Benefit from the combination of SH725 coated carbide for cutting-edge stability, the rhombic 55° geometry for precise turning, and the secure clamping ensured by the central hole design — all contributing to steady cycle times and predictable tool life. Order directly via Metav Werkzeuge or consult their technical team for application-specific selection. DCGT070202 SH725 ISO indexable turning insert — rhombic 55° by Tungaloy DCGT070202 SH725 is an ISO‑standard indexable turning insert designed for external and internal turning applications and compatible with ISO holders when form, clearance, tolerance class, fastening and thickness match. Coated carbide grade SH725 Rhombic 55° geometry, size 07 0.2 mm corner radius for precise finishes With hole and 40°–60° countersink Single-sided chipbreaker for controlled chips Consistent cutting performance that reduces rework The SH725 grade is a coated carbide engineered for edge stability and toughness, which maintains cutting integrity under varying engagement conditions. This results in fewer interrupted cuts and reduced scrap rates in serial production. The coating improves wear resistance and contributes to longer service intervals compared with uncoated grades, while the substrate composition supports thermal and mechanical loads typical of general turning operations. These material choices give a measurable effect on process reliability and more predictable tool change intervals. Geometry and clamping that enhance stability and repeatability The rhombic 55° geometry with a 0.2 mm corner radius and 2.38 mm thickness offers a balance between chip formation and edge strength; the included angle provides favourable cutting forces for a range of cross‑sections. The insert’s central hole with cylindrical bore and one‑sided countersink (40°–60°) ensures firm seating and repeatable orientation in compatible ISO holders, reducing vibration and runout. Together these mechanical attributes translate to improved surface finish and dimensional consistency on turned parts. Controlled chips and adaptable cutting conditions Equipped with a single‑sided chipbreaker, the insert supports stable chip control across varied materials and depths of cut, which simplifies swarf handling and machine protection. The grade’s toughness suits smaller toolholders and changing engagement conditions commonly encountered in mixed‑batch or jobbing environments. Selecting this geometry and chipbreaker combination can reduce downtime caused by clogged chipflows and helps maintain steady feed and speed recommendations from process plans. Broad applicability and straightforward integration into workflows As an ISO‑compliant indexable insert, the module integrates into established toolholding systems when holder specifications align with the insert form, clearance angle and tolerance class. The size 07 designation and rhombic profile are standard across many holders, easing inventory management for workshops. For engineering teams seeking a balance between productivity and process security, the combination of SH725 material behaviour and the insert’s mechanical design supports efficient turning of components with consistent results. Choose the SH725 grade from Tungaloy for dependable edge stability and predictable tool life — contact Metav Werkzeuge for tailored advice, availability and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Manufacturer article number: 6932702 SKU: 6932702-Tungaloy Designation: DCGT070202 Model series: ISO indexable turning inserts Manufacturer: Tungaloy Core measurements Included angle: 55° Clearance angle: 7° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 07 Countersink angle range: 40°–60° Features and materials Coated carbide grade SH725 Rhombic insert geometry Single-sided chipbreaker With hole: cylindrical bore + one-sided countersink ISO-compliant for external and internal turning FAQ What materials is this insert suitable for? The DCGT070202 SH725 insert is a coated carbide grade designed for general turning tasks where edge stability and toughness are required; it performs well across a broad range of steels and mixed production conditions. How does the 55° geometry affect cutting forces? A 55° rhombic angle shifts cutting forces to a profile that is favourable for many turning operations, improving chip thinning and helping to achieve consistent surface quality with the specified corner radius. Is the insert easy to seat in standard holders? Yes. The insert’s ISO form, central hole and single‑sided countersink provide secure clamping in compatible ISO toolholders, promoting repeatable positioning and reduced runout. What advantage does the single‑sided chipbreaker offer? The single‑sided chipbreaker on this insert promotes predictable chip control across variable engagement conditions, which reduces swarf issues and improves process stability during turning. Can this insert be used for internal turning as well as external turning? The ISO rhombic form and chip control features make the insert suitable for both external and internal turning when matched with appropriate holders and operational parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide for stable cutting edges and the ISO rhombic 07 geometry with a 0.2 mm corner radius to ensure reliable, repeatable turning performance; order directly via Metav Werkzeuge or consult the technical team for application advice. DCGT 070202 SH725 — ISO turning insert, coated carbide by Tungaloy A DCGT 070202 SH725 indexable insert designed for ISO‑compliant external and internal turning, optimised for small‑tool operations and varying engagement conditions ISO-compliant rhombic 07 geometry SH725 coated carbide, edge-stable grade 7° relief angle for versatile turning Cylindrical hole with 40°–60° countersink Stable cutting performance where small tools and variable engagement meet The SH725 grade is a coated carbide developed for tough, edge‑stable performance in turning operations that experience fluctuating cutting conditions. Its formulation emphasises resistance to chipping and a steady tool life, making it suitable for shorter‑run production and mixed batch work where frequent tool changes or varying feeds occur. The combination of SH725 and the rhombic geometry supports consistent cutting behaviour and reduced downtime through fewer insert changes. ISO geometry for straightforward holder compatibility and secure clamping Built to the ISO DCGT070202 standard, the insert features the familiar rhombic 07 outline and a 7° relief angle, which simplifies selection of matching external holders or boring bars. Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness—this insert’s ISO conformity reduces uncertainty when integrating into existing tool systems. The cylindrical hole with a single‑side countersink (40°–60°) ensures firm seating and repeatable indexing when used with the correct clamp set and replacement screws. Controlled chip formation and reliable finish with a 0.2 mm corner radius A 0.2 mm corner radius provides a balance between edge strength and surface quality: it strengthens the cutting edge under intermittent cuts while still delivering acceptable surface finish in general turning. The single‑sided chipbreaker is tailored for predictable chip control, helping to avoid long, tangled chips and supporting safer, more efficient swarf evacuation. For customers seeking dimensionally consistent results, the insert’s geometry and chipbreaker together aid in achieving repeatable part tolerances and improved process stability. Practical system integration and workshop advantages As part of an ISO turning insert system, the unit works in combination with a matching external holder or boring bar, plus an underlay/clamping set and spare screws for maintenance. The plate thickness of 2.38 mm and the standardised size designation make stock management and replacement straightforward. Using this insert within a controlled tooling concept reduces set‑up time and supports predictable cycle times, which in turn enhances overall machining productivity and reduces per‑part cost through longer effective tool life. For application-specific advice or to order Tungaloy SH725 inserts, contact Metav Werkzeuge for tailored recommendations and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737245 SKU: 6737245-Tungaloy Manufacturer SKU: TUN6737245 Model series: ISO-Drehwendeschneidplatten Grade: SH725 Facts Corner radius: 0.2 mm Relief angle: 7° Insert angle: 55° Thickness: 2.38 mm Size designation: 07 Special features Rhombic insert shape (DCGT) One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO designation DCGT070202 Coated carbide cutting material Intended application: Turning FAQ What turning tasks suit this insert best? This insert is intended for general external and internal turning; the SH725 grade gives good edge stability for mixed engagement and smaller‑tool applications. Which holders are compatible with this geometry? Holders compatible with the ISO DCGT070202 profile and a 7° relief angle provide the required fit; secure clamping is achieved using a matching underlay and clamping set. How does the 0.2 mm corner radius affect part finish and tool life? A 0.2 mm radius increases edge robustness under interrupted cuts while maintaining acceptable surface finish, helping to extend the effective tool life of the insert. Is the chip control suitable for automated machining cells? Yes, the single‑sided chipbreaker promotes predictable chip formation and easier evacuation, which supports automated turning processes and safer unattended operation. What product reference should be used when ordering spare inserts? Order using Article number 6737245 or SKU 6737245-Tungaloy to ensure the correct DCGT070202 SH725 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 coated carbide grade and the rhombic DCGT070202 geometry with a 0.2 mm nose radius for stable cutting and consistent surface quality; the ISO form ensures simple interchangeability with standard holders. Order or request application advice directly via Metav Werkzeuge for rapid supply and technical consultation. DCGT 070202 SH725 — Turning insert (rhombic) by Tungaloy DCGT070202 SH725 is an ISO rhombic turning insert designed for external and internal turning applications, offering robust edge stability in varying engagement conditions. Coated carbide SH725 for durable cutting Rhombic insert, size 07 0.2 mm nose radius for fine finishes Cylindrical hole with single-sided countersink Reliable productivity from a stable grade The coated carbide SH725 is formulated for edge stability and predictable wear behaviour, which results in longer tool life and fewer insert changes during batch runs. The tough microstructure of this grade is particularly beneficial when machining with smaller tooling or where cutting conditions vary, as it reduces the risk of chipping and unplanned downtime. This reliability translates into tangible production benefits: higher uptime, fewer tool changes and a more consistent surface finish on machined components. Geometry that improves finish and repeatability The rhombic geometry with a 55° main cutting angle and a 0.2 mm nose radius provides a balance between strength and detail, enabling improved surface integrity on shafts and bores. The small radius allows finer finishes while the insert shape maintains sufficient edge support for medium cutting forces. Because the insert is ISO‑standardised, tool presetting and repeatability are simplified, helping to reduce setup time and maintain consistent part quality across shifts. Designed for system compatibility and easy mounting The insert’s dimensions—size 07 and 2.38 mm thickness—plus the cylindrical hole with a single-sided countersink (40°–60°) ensure secure clamping in standard ISO holders. Compatibility is dictated by form, clearance angle and tolerance class, so the standardised DCGT geometry eases tool management in multi‑tool environments. Using ISO‑conforming components reduces inventory complexity and speeds up replacement, supporting continuous production flow. Chip control and application guidance The single-sided chipbreaker is intended for general turning where consistent chip formation aids evacuation and surface quality. For external and internal turning operations, pairing the chipbreaker style with the SH725 grade yields smooth chip flow under typical feeds and depths of cut. When machining mixed batches or components with variable engagement, this combination provides a robust, forgiving solution that helps maintain process stability and reduces the likelihood of interrupted cycles. For machining tasks requiring dependable edge stability and straightforward system compatibility, contact Metav Werkzeuge for availability and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Tungaloy SH725 inserts and suitable holders Technical Data Article number: 6737136 Manufacturer SKU: TUN6737136 SKU: 6737136-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Coating/grade: SH725 Core data ISO code: 070202 Size: 07 Thickness: 2.38 mm Clearance angle: 7° Main cutting angle: 55° Nose radius: 0.2 mm Features & Applications Rhombic insert form With hole Cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker For turning (external and internal) Suited to smaller tools and variable engagement conditions FAQ What materials is this insert suitable for? The DCGT070202 SH725 insert (Tungaloy, turning insert, SKU 6737136-Tungaloy) is a general‑purpose coated carbide grade designed for a broad material range and is especially effective where edge stability is required. How does the 0.2 mm radius affect surface finish? A 0.2 mm nose radius provides finer surface quality and is suitable for finishing passes; the geometry balances finish and edge strength to reduce the risk of chipping. Can this insert be clamped in standard ISO holders? Yes, the insert follows ISO geometry and the cylindrical hole with countersink enables secure mounting in compatible ISO conforming toolholders. What is the purpose of the single‑sided chipbreaker? The single‑sided chipbreaker promotes controlled chip formation and evacuation during turning, which helps maintain process stability and repeatable surface quality. Is SH725 suitable for variable cutting conditions? SH725 is a tough, edge‑stable coated carbide grade intended to perform well under changing engagement conditions and in smaller tooling setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 coated carbide grade and the ISO-conformant geometry for reliable turning performance; the combination of edge stability, consistent chip control and straightforward holder compatibility supports productive machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DCGT 070202 SH725 indexable turning insert by Tungaloy — ISO rhombic insert, 7° clearance, 0.2 mm nose radius DCGT 070202 SH725 is an ISO-form insert designed for external and internal turning with robust edge stability and consistent chip control. Coated carbide SH725 for tough edges ISO-standard rhombic insert, size 07 7° clearance with 55° approach angle Cylindrical hole with 40°–60° countersink Optimised grade and edge stability for predictable machining The SH725 coated carbide grade delivers a balance of toughness and wear resistance that maintains edge stability during interrupted cuts and variable engagements. This makes the insert particularly suited to operations where tool engagement changes or where smaller toolholders must be used. Thanks to the coating and substrate combination, the insert offers improved resistance to chipping while supporting stable chip formation, which reduces the frequency of tool changes and contributes to uninterrupted production. ISO geometry and measured parameters for simple integration Designed to ISO dimensions, the rhombic DCGT form ensures compatibility with a wide range of ISO holders. Key measured characteristics — 0.2 mm corner radius, 7° clearance, 55° approach angle and a plate thickness of 2.38 mm — define the cutting geometry and influence surface finish and tool life. The standardised shape and tolerance classes allow easy replacement and predictable set-up: match holder form, clearance angle, fastening style and plate size to achieve correct clamping and repeatable positioning. Application guidance: where this insert excels The insert is intended for general turning tasks — both external and internal — where a single-sided chipbreaker and a robust grade are beneficial. The single-sided chipbreaker promotes controlled chip evacuation for many common materials; select chipbreaker geometry and grade according to workpiece material and machining stability. The system approach (ISO insert, compatible external holder or boring bar, shim and clamping set plus replacement screws) simplifies tool management and reduces setup times on the shop floor. Small-tool performance and variable-engagement reliability For operations with smaller tools or fluctuating cut depths, the combination of a tough carbide substrate and the SH725 coating helps maintain edge integrity under adverse cutting conditions. The cylindrical mounting hole with a one-sided countersink (40°–60°) supports secure clamping and consistent seating, which is essential when repeatability and vibration resistance are priorities. This geometry supports a predictable contact area that aids in extending usable tool life and improving process stability. Contact Metav Werkzeuge for application advice or to check availability of the Tungaloy DCGT070202 SH725 indexable turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737012 Manufacturer SKU: TUN6737012 SKU: 6737012-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Clearance angle: 7° Approach / nose angle: 55° Plate thickness: 2.38 mm Plate size: 07 ISO code: 070202 Special features Material: coated carbide (Hartmetall) Grade / coating: SH725 Plate form: rhombic Mounting: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Typical use: external and internal turning Compatibility determined by shape, clearance, tolerance class, fastening, size and thickness FAQ What holder types accept this insert? The insert follows ISO dimensions for rhombic turning inserts; it is compatible with ISO external holders and boring bars specified for DCGT 070202 profiles when the holder matches form, clearance and fastening style. Which materials is the SH725 grade suitable for? The SH725 coated grade is formulated for a broad range of turning tasks where toughness and edge stability are required; choose chipbreaker and grade based on the specific workpiece material and machining conditions. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius balances strength and surface quality: it improves edge robustness compared with a sharp edge while still allowing acceptable surface finish for many turning operations. Is the mounting hole compatible with standard clamping screws? Yes. The insert has a cylindrical hole with a single-sided countersink (40°–60°) designed for secure seating and standard clamping hardware used with ISO-type inserts. What advantage does the single-sided chipbreaker provide? A single-sided chipbreaker offers controlled chip formation in many turning applications, simplifying chip evacuation and helping to maintain process stability when paired with the appropriate grade and cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, coated carbide grade and ISO‑standard geometry for consistent turning performance; the combination of SH725 wear resistance and a secure clamping fit minimises tool changes and supports stable chip control. Order the DCGT070202 SH725 indexable insert directly via Metav Werkzeuge or consult the Metav team for process support. DCGT 070202 SH725 turning insert by Tungaloy — rhombic ISO insert for general turning DCGT070202 SH725 is an ISO‑standard rhombic indexable insert designed for external and internal turning applications, offering a tough coated‑carbide grade tailored to stable cutting edges and variable engagement conditions. *ISO‑standard rhombic turning insert size 07 *Coated carbide grade SH725 for stable cutting edges *7° clearance angle for reduced cutting forces *Cylindrical hole with single‑side countersink Increased productivity through a tough, coated carbide grade The coated carbide composition in grade SH725 provides a balance of toughness and edge stability that reduces unexpected wear and extends in‑process life. That translates into fewer tool changes and higher machine uptime in batch and single‑piece production. The single‑sided chipbreaker helps manage swarf in interrupted cuts and variable engagement, while the coating improves resistance to abrasion and built‑up edge. For operations where tool reliability and predictable life deliver measurable cost benefits, this grade is a pragmatic choice. Secure seating and repeatable accuracy for consistent results The ISO standard geometry and defined seating features ensure a reproducible clamping fit when paired with the appropriate holder, shim and clamp set. Key dimensions such as the 2.38 mm thickness, 55° included angle, corner radius 0.2 mm and 7° clearance contribute to dimensional stability and cutting predictability. A cylindrical central hole with a single‑side countersink (40°–60°) simplifies secure fastening and repeatable indexability, reducing setup variation and supporting consistent surface finish across multiple parts. Flexibility in application and guidance for selection The rhombic 07 form and modest corner radius make this insert suitable for a range of turning tasks, including finishing and light roughing in confined tool setups. The one‑sided chipbreaker is effective where chip control and evacuation are critical; selecting the matching chipbreaker and grade according to workpiece material and machine stability is advised. System components include an ISO turning insert, a compatible external holder or boring bar, and the necessary shim/clamp and spare screws for maintenance. The insert is particularly well suited to smaller toolholders or operations with changing engagement conditions, offering operational flexibility without sacrificing process security. For stable turning performance with Tungaloy’s SH725 grade, contact Metav Werkzeuge for technical guidance and availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737013 Manufacturer SKU: TUN6737013 SKU: 6737013-Tungaloy Manufacturer: Tungaloy Facts Size: 07 Thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Corner radius: 0.2 mm Design & features Rhombic insert form Coated carbide grade SH725 Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Compatible with ISO turning holders Intended for external and internal turning FAQ What materials is this insert suitable for? The DCGT070202 SH725 insert is a coated carbide grade designed for a broad range of turning tasks; material selection should match the SH725 properties and the chosen chipbreaker for best results. How is the insert secured in the holder? The insert uses a central cylindrical hole with a single‑side countersink (40°–60°) and is clamped with the appropriate shim and clamp set to ensure repeatable positioning and reliable indexability. Can this insert be used for interrupted cuts? Yes, the toughness of the SH725 grade and the one‑sided chipbreaker make the insert suitable for operations with variable engagement, including intermittent cuts. What is the corner radius and why does it matter? The corner radius is 0.2 mm; a smaller radius supports finer finishes and reduced cutting forces in confined tool setups, while larger radii would be chosen for higher load roughing. Is the insert compatible with standard ISO turning holders? Compatibility depends on form, clearance angle, tolerance class, mounting and thickness; the DCGT070202 conforms to ISO turning insert standards and is designed for use with matching ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070202 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of SH730 coated carbide toughness, a 55° rhombic geometry and a 0.2 mm nose radius for reliable turning performance and stable tool life; order directly via Metav Werkzeuge or contact our consultants for application advice. DCGT070202 SH730 ISO turning insert for Turning — Tungaloy, 55° rhombic, 0.2 mm radius DCGT070202 SH730 is a coated carbide indexable insert engineered for external and internal turning operations; it suits applications requiring a balance of edge stability and toughness. Coated SH730 grade for edge stability 55° rhombic geometry for versatile turning 0.2 mm nose radius balances finish and strength Reliable performance from a tough coated carbide grade The SH730 coated carbide composition provides a combination of toughness and edge stability, making it suitable for variable engagement conditions and smaller tool assemblies. As an ISO indexable insert, the DCGT070202 is designed to be compatible with suitable holders when form, clearance angle, tolerance class, clamping and thickness match. This makes the insert a pragmatic choice where interrupted cuts or changing cut depths occur, since the grade reduces the risk of premature chipping while maintaining consistent tool life. Geometry and chip control that support process stability The 55° rhombic geometry and the one-sided chipbreaker direct chip flow reliably during both external and internal turning. The 7° clearance angle and the modest 0.2 mm nose radius provide a balance between robustness and surface finish: the small radius helps achieve acceptable part appearance while preserving edge strength under moderate cutting forces. For system integrity, the insert operates as part of a set-up comprising the ISO indexable plate, an appropriate external holder or boring bar, a shim/locking set and replacement screws, ensuring repeatable clamping and axial positioning. Compatibility, selection and practical benefits for production Selection of the correct chipbreaker and grade is essential: the one-sided chipbreaker is matched to the SH730 sort for general turning tasks and intermittent cuts. Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness; the plate’s rhombic shape and with-hole design (cylindrical hole plus single-sided countersink at 40°–60°) simplify accurate seating and secure fastening. Choosing this insert supports predictable machining cycles, reduced set-up time and more consistent results across batch runs. For tailored application support or availability inquiries regarding the Tungaloy SH730 grade, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a precise recommendation and delivery information. Technical data Article number: 6853998 SKU: 6853998-Tungaloy Manufacturer SKU: TUN6853998 Model series: ISO indexable turning inserts Numbers / Core technical data Size designation: 07 Thickness: 2.38 mm Insert angle: 55° Clearance angle: 7° Nose radius: 0.2 mm Designs / Special features Shape: rhombic Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Material: coated carbide (SH730) Application: turning (external and internal) System components: ISO insert, external holder or boring bar, shim/locking set and spare screws Compatibility criteria: form, clearance angle, tolerance class, clamping, size and thickness FAQ Which machining tasks is this insert best suited to? The DCGT070202 SH730 insert is intended for turning tasks, covering both external and internal operations where a tough, edge-stable grade is required. How does the SH730 grade affect tool life and performance? SH730 is a tough, edge-stable coated carbide sort designed to maintain a reliable cutting edge under variable engagement and in smaller tool assemblies, improving repeatability in production. What does the 0.2 mm nose radius mean for surface finish? A 0.2 mm radius delivers a compromise between tool strength and surface quality, allowing acceptable part finish while reducing the likelihood of edge chipping under moderate loads. Can the insert be used in any standard ISO holder? Compatibility depends on shape, clearance angle, tolerance class, clamping method, size and thickness; the DCGT070202 is an ISO-design insert that requires a matching holder and fastening components for correct seating. What is the purpose of the countersunk hole design? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and precise positioning in compatible ISO holders, aiding repeatable set-up and stability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade that lowers cutting forces and produces cleaner surfaces in non-ferrous turning. Benefit from ISO compatibility for straightforward toolholder matching and a single-sided chipbreaker that improves chip control and process stability. Order or request application advice via Metav Werkzeuge. DCGT 070202 TH10 — ISO turning insert for turning, Tungaloy A DCGT070202 TH10 insert designed for ISO-compliant external and internal turning, providing a sharp, uncoated cutting edge for clean finishes on non-ferrous materials. Sharp uncoated carbide grade TH10 Rhombic 07 geometry with 55° included angle Single-sided chipbreaker for consistent chips Cylindrical hole with 40°–60° countersink Reliable low-force cutting for non-ferrous materials The combination of a sharp, uncoated carbide edge and the TH10 grade delivers reduced cutting forces and minimised built-up edge when machining aluminium, brass and other non-ferrous alloys. This results in a clean surface finish and lower spindle load, which can extend toolholder life and reduce machine wear. For engineers seeking predictable results in general-purpose turning, the uncoated grade offers straightforward performance without the complexity of specialised coatings. Consistent fit and repeatable geometry in ISO systems The insert conforms to ISO conventions and features a rhombic 07 geometry with a 55° included angle and a 7° clearance angle, ensuring mechanical compatibility with standard holders. Matching by shape, clearance, tolerance class, fastening, size and thickness is essential for secure seating and repeatable clamping. The insert is part of a system comprising an insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws, which together support stable and repeatable turning operations. Improved chip control and secure mounting A single-sided chipbreaker is tailored to produce controlled chip formation in non-ferrous applications, aiding evacuation and reducing the risk of entanglement on the workpiece. The insert includes a cylindrical hole with a one-sided countersink (40°–60°) that facilitates reliable fastening and stability under cut. The 0.2 mm corner radius offers a balance between edge strength and fine surface finish, making it suitable for finishing and light to moderate turning passes. Practical guidance for selection and setup Use the single-sided chipbreaker and the uncoated carbide grade when low cutting forces and surface quality are priorities; select toolholder rigidity and clamping torque accordingly to achieve reproducible results. The insert’s 2.38 mm thickness and ISO code 070202 define its mechanical envelope—ensure the chosen holder accepts size 07 inserts and the specified thickness. For optimised procesing, pair the insert with a stable holder and adjust cutting parameters to the chosen non-ferrous alloy and operation type. Contact Metav Werkzeuge for tailored advice on machining parameters and to specify the Tungaloy DCGT070202 TH10 insert for production use — Metav Werkzeuge provides application guidance and immediate availability. Technical Data Article number: 6802798-Tungaloy Manufacturer SKU: TUN6802798 Manufacturer article number: 6802798 Brand: Tungaloy Designation: DCGT070202 TH10 Tungaloy insert Material: carbide Data ISO code: 070202 Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Special features Uncoated carbide cutting material Sharp universal grade TH10 for non-ferrous materials Rhombic insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: Turning (external and internal) System components: insert, compatible holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The DCGT070202 TH10 insert is optimised for non-ferrous materials such as aluminium and brass, where a sharp, uncoated edge helps achieve low cutting forces and a clean surface finish. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation and easier evacuation, improving surface quality and reducing downtime during turning operations. Which toolholders are compatible with this ISO insert? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size (07) and thickness (2.38 mm); choose an ISO-compatible external holder or boring bar designed for rhombic DCGT inserts. What does the 0.2 mm corner radius mean for finish and strength? A 0.2 mm corner radius balances edge strength with the ability to produce fine surface finishes, making it suitable for finishing cuts and light to moderate turning passes. Is the insert supplied with screws or clamping accessories? The insert is supplied as the cutting plate; the ISO system typically comprises an insert, holder or boring bar, shim/clamping set and replacement screws—ensure the clamping set and screws match the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a sharp TH10 uncoated carbide grade, a rhombic 55° geometry and reliable ISO compatibility to achieve low cutting forces and clean surface finishes; order directly via Metav Werkzeuge or consult with our specialists for application-specific advice. DCGT 070202 TH10 indexable turning insert — rhombic 55°, uncoated carbide by Tungaloy DCGT 070202 TH10 indexable turning insert for general turning applications, optimised for non-ferrous materials and operations requiring low cutting forces and fine surface quality. ISO 070202 geometry, rhombic 55° Uncoated carbide grade TH10 for clean finishes Single-sided chipbreaker for reliable chip control Compatible with ISO turning holders Efficient machining of non-ferrous materials with reduced cutting effort The TH10 grade is an uncoated carbide designed as a sharp, universal cutting edge to support low cutting forces and deliver a clean surface on non-ferrous workpieces. For operations where minimal burr and fine finishes matter, the combination of a finely honed cutting edge and a single-sided chipbreaker promotes predictable chip formation and simpler post-process handling. The reduced cutting forces translate into lower power draw and can enable slightly higher feed rates without compromising component tolerance, making this insert a rational choice where cycle time and surface quality are priorities. Clear system compatibility for fast tool changes and repeatable results Compatibility with holders is governed by geometry, relief angle, tolerance class, clamping method, size and thickness; the ISO-standardised format simplifies selection and replacement in modular turning systems. The rhombic 55° shape with a central hole and single-sided countersink (40°–60°) supports stable seating in ISO turning holders and provides secure clamping with standard clamps and screws. As an indexable insert, the DCGT form permits quick indexing and reduced downtime, while the standardised dimensions mean spares and shims are readily interchangeable across compatible tool systems. Practical guidance for applications and process stability Use this insert for external and internal turning where the workpiece material and process stability favour an uncoated, sharp grade—especially non-ferrous alloys and soft steels where low cutting forces reduce workpiece distortion. Select the single-sided chipbreaker and TH10 grade to balance chip control and surface finish; when higher wear resistance is required, consider a coated grade as an alternative. The insert’s design supports stable chip formation and repeatable performance, contributing to consistent component quality and predictable tool-change intervals that aid production planning and cost control. For precise turning with Tungaloy's TH10 grade, contact Metav Werkzeuge for ordering and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6802786 Manufacturer SKU: TUN6802786 SKU: 6802786-Tungaloy Model series: ISO turning inserts Description: DCGT070202 TH10 Tungaloy indexable insert Application: Turning Material: Carbide Facts Angle: 55° Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Special features Grade: TH10 (uncoated carbide) Chipbreaker: single-sided Shape: rhombic (55°) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness Typical use: external and internal turning; non-ferrous materials FAQ What materials is this insert best suited for? The DCGT 070202 TH10 indexable turning insert is optimised for non-ferrous materials and applications where a sharp, uncoated carbide edge supports low cutting forces and fine surface finishes. Which holder types are compatible with this geometry? ISO-compatible turning holders that accept DCGT-form inserts with size 07 and a central hole (cylindrical with single-sided countersink) are suitable; the insert’s ISO dimensions ensure straightforward mounting. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker on the DCGT 070202 promotes predictable chip control and simpler swarf handling, which helps to maintain consistent surface quality during turning operations. Is this insert suitable for internal turning? Yes, the insert is designed for both external and internal turning; select appropriate holder geometry and cutting parameters to match the workpiece and access constraints. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated carbide performance, rhombic 07 geometry and a fine 0.2 mm nose radius for reliable turning results; order the insert directly via Metav Werkzeuge or consult our advisers for application-specific selection. DCGT 070202 TH10 ISO turning insert — Tungaloy, uncoated carbide, rhombic 07 A DCGT070202 TH10 insert designed for ISO‑standard turning operations, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finish. Uncoated carbide for low cutting forces Rhombic 07 geometry, 55° cutting angle Single-sided chipbreaker, cylindrical hole ISO-standard insert for precise holder fit Higher machining efficiency for non‑ferrous turning The uncoated TH10 carbide grade provides a sharp, low‑friction cutting edge that reduces cutting forces and improves surface quality when machining aluminium, copper alloys and other non‑ferrous materials. With a 0.2 mm nose radius and a 55° approach angle, the geometry supports stable chip formation and consistent finishes on both external and internal turns. The carded combination of geometry and grade yields measurable gains in cycle time when matched to a suitable holder and stable set‑up, making the insert a pragmatic choice for production and repair work alike. Secure clamping and dependable chip control Designed as an ISO‑standard indexable insert, the rhombic 07 form and a 2.38 mm plate thickness ensure compatibility with a broad range of external holders and boring bars. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for positive locate and repeatable clamping; this reduces chatter and improves dimensional stability in interrupted cuts. The single‑sided chipbreaker is tuned for one‑pass chip control on non‑ferrous alloys, simplifying disposal and protecting the workpiece from edge marks. Practical selection and predictable tool life When selecting tooling for turning applications, align the chipbreaker type and the TH10 grade with component rigidity and required surface finish. The uncoated grade performs best where a clean edge is preferable and where coating adhesion is unnecessary; in such cases, toolholders can be changed quickly while retaining repeatable accuracy. The insert is suitable for both external and internal turning tasks; choosing the correct holder geometries and clearance angles will extend service life and lower machining costs, delivering a clear cost‑benefit in continuous production environments. Contact Metav Werkzeuge for application support or to request the TUN6802795 item — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply Technical data Article number: 6802795 Manufacturer article number: 6802795 SKU: 6802795-Tungaloy Manufacturer SKU: TUN6802795 Manufacturer: Tungaloy Core specifications Radius: 0.2 mm Cutting angle: 55° Relief angle: 7° Plate thickness: 2.38 mm Plate size: 07 Plate form: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Materials & features Material: carbide Grade/coating: TH10 (uncoated) Application: turning (external and internal) Typical system: ISO insert with matching external holder or boring bar Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCGT070202 TH10 insert is intended primarily for non‑ferrous materials such as aluminium and copper alloys, where the uncoated TH10 carbide grade gives low cutting forces and clean surfaces. How is the insert mounted in a holder? Mounting requires the appropriate ISO‑compatible holder or boring bar; the DCGT070202 uses a cylindrical hole with a single‑sided countersink to ensure secure, repeatable clamping. What does the TH10 designation indicate? TH10 denotes an uncoated universal carbide grade from Tungaloy designed to provide a sharp cutting edge and broad applicability for non‑ferrous machining. What are the key geometry values to note? Important values are the 0.2 mm nose radius, 7° relief angle and the 55° approach angle, which together influence chip formation and surface finish. Is this an ISO‑standardised insert? Yes, the insert conforms to ISO dimensions for interchangeability with matching ISO holders; the model series is ISO‑turning indexable inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade combined with a secure clamping design for reliable turning performance and fine surface quality. The combination of a low corner radius and single‑sided chipbreaker keeps cutting forces down and chip control predictable. Order the DCGT070202 TH10 indexable insert via Metav Werkzeuge or consult the team for holder matching and process recommendations. DCGT070202 TH10 — Indexable turning insert (ISO 070202) by Tungaloy DCGT070202 TH10 is an ISO‑standard indexable insert for turning, optimised for non‑ferrous materials and operations where low cutting forces and a clean surface finish are required. ISO‑norm rhombic insert DCGT070202, 55° included angle Uncoated TH10 carbide for low cutting forces and clean finish Single‑sided chipbreaker, suitable for turning operations Cylindrical hole with 40°–60° countersink for secure clamping Reliable cutting with low cutting forces and fine finishes The insert features uncoated carbide in the TH10 grade, a sharp universal specification developed to support low cutting forces and produce a clean surface finish. For turning applications on non‑ferrous materials and situations where minimal cutting resistance is advantageous, this composition reduces power draw and helps to avoid built‑up edge formation. Lower cutting forces also mean less chatter and improved dimensional consistency, contributing directly to a predictable productivity increase in series production. Stable geometry and secure clamping for process reliability The rhombic 07 shape with a 55° included angle and a 0.2 mm corner radius gives a balanced compromise between strength and accessibility in both external and internal turning. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) which ensures secure clamping in suitably matched toolholders; the countersink helps to centre the insert and distribute clamping forces evenly. A single‑sided chipbreaker provides defined chip formation and evacuation on the active cutting edge, reducing the risk of erratic chips and improving operator safety in automated processes. ISO compatibility and selection guidance for efficient integration As an ISO‑standard indexable insert, compatibility with a toolholder is determined by the insert form, clearance angle (7°), tolerance class, fastening method, size and thickness. The plate thickness is 2.38 mm and the plate size is 07, details that should be matched to the holder specification to ensure correct seating and repeatable performance. Choose the single‑sided chipbreaker and the TH10 grade specifically when machining softer alloys, non‑ferrous materials and mixed batches where a clean finish and low cutting forces are priorities; for harder or abrasive materials, alternative grades and chipformers should be considered to protect tool life. Contact Metav Werkzeuge for holder compatibility checks, delivery options and to request the Tungaloy DCGT070202 TH10 indexable insert (SKU TUN6802790) for immediate integration into your turning process. Technical data Article number: 6802790 Manufacturer SKU: TUN6802790 SKU: 6802790-Tungaloy Manufacturer: Tungaloy Key measurements Radius: 0.2 mm Included angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 07 Materials & features Material: cemented carbide (uncoated) Grade: TH10 Shape: rhombic Chipbreaker: single‑sided Hole style: cylindrical hole with 40°–60° countersink Series: ISO‑standard indexable turning inserts Application: turning (external and internal) FAQ What materials is this insert best suited for? The DCGT070202 TH10 Tungaloy insert is intended primarily for non‑ferrous materials and applications where an uncoated carbide edge provides low cutting forces and a clean finish. Will this insert fit standard ISO rhombic 07 holders? Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the DCGT070202 is an ISO rhombic 07 insert and will fit holders designed for ISO 070202 geometry when the holder matches the thickness and clamping arrangement. What advantages does the single‑sided chipbreaker provide? A single‑sided chipbreaker on the DCGT070202 TH10 insert controls chip formation on the active edge, improving chip evacuation during turning and reducing the risk of long, tangled chips in automated operations. Can this insert be used for internal turning operations? Yes, the geometry and 55° included angle of this insert make it suitable for both external and internal turning, provided the appropriate holder and approach conditions are used. How does the hole and countersink design affect clamping? The cylindrical hole with a 40°–60° countersink centres the insert and helps distribute clamping forces, enhancing stability and repeatability of the cutting edge under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated carbide grade and a single-sided chipbreaker for reliable, low-force turning of non-ferrous components; order directly via Metav Werkzeuge or contact their specialists for application advice. DCGT070202 TH10 Tungaloy insert — ISO turning insert, rhombic 55° geometry The DCGT070202 TH10 Tungaloy insert is an ISO-indexed turning insert for external and internal turning, offering a sharp, uncoated carbide grade intended to reduce cutting forces and produce clean surface finishes. ISO-indexed rhombic format TH10 uncoated carbide grade Single-sided chipbreaker for controlled chips 0.2 mm corner radius for fine finishing Efficient, low-force turning for non-ferrous components The combination of an uncoated carbide grade and a fine 0.2 mm corner radius means the insert is optimised for operations where minimal cutting force and a neat surface are priorities. The TH10 grade is a universal, sharp grade suited to non-ferrous materials and machining situations that favour a clean, burr‑free finish. By favouring a lower cutting force, the tool reduces tool‑holder loads and can improve stability in light to medium cuts, which directly contributes to higher process efficiency and fewer rejected parts. ISO compatibility and secure clamping minimise downtime Designed to ISO standards, the insert’s rhombic geometry and the cylindrical hole with one-sided countersink (40°–60°) ensure secure, reproducible mounting in compatible holders. The specified 7° clearance and 55° lead angle deliver predictable cutting engagement and chip flow, while the standardised size and thickness simplify tool inventory and replacement. Clear specification of form, clearance, tolerance class, fixation and thickness reduces set‑up time and helps maintain consistent part quality across different shifts and machines. Practical guidance for choosing and using the insert For best results in both external and internal turning, match the single‑sided chipbreaker and the TH10 grade to the workpiece material and the intended cut depth. Stable chip control and a sharp cutting edge are particularly helpful when machining softer non‑ferrous alloys or when producing components that require a high‑quality surface without secondary finishing. Ensure the mating holder is correct for the insert geometry to maintain the rated performance and to make the most of the insert’s advantages in repeatability and surface integrity. For precise, low-force turning applications choose the Tungaloy DCGT070202 TH10 insert supplied by Metav Werkzeuge — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery Technical data Article number: 6802789 Manufacturer SKU: TUN6802789 SKU: 6802789-Tungaloy ISO designation: DCGT070202 Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Lead angle: 55° Special features Material: Carbide (uncoated) Grade: TH10 Chipbreaker: Single-sided Hole: Cylindrical hole with one-sided countersink (40°–60°) Shape: Rhombic Application: Turning (external & internal) FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is primarily intended for non‑ferrous materials and situations where a sharp edge and low cutting forces produce cleaner surfaces. Is the DCGT070202 compatible with standard ISO turning holders? Yes, the DCGT070202 insert follows ISO dimensions and mounting styles; compatibility depends on matching the holder’s form, clearance, tolerance and thickness. How does the single-sided chipbreaker affect machining? A single-sided chipbreaker promotes predictable chip formation and evacuation in many turning operations, which helps maintain surface quality and reduces the risk of build‑up on the cutting edge. What does the 0.2 mm corner radius mean for finish and tool life? A 0.2 mm radius provides a fine edge for improved surface finish and reduced burr formation; it is suitable for light to moderate cuts but may require careful feed selection to avoid edge chipping in heavy interrupted cuts. Which SKU should be ordered for this insert? Order using SKU 6802789-Tungaloy to ensure the correct DCGT070202 TH10 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear-resistant grade, precision carbide construction and ISO‑compliant geometry for consistent turning performance; order directly via Metav Werkzeuge or consult the team for application advice. DCGT 070204 GH330 Tungaloy — ISO turning indexable insert for external and internal turning, rhombic 55° geometry, 7° clearance The DCGT070204 GH330 is an ISO‑standard indexable insert designed for precision external and internal turning; compatible holders and fastening parts must be matched by form, clearance angle, tolerance class, attachment and size. ISO-standard rhombic insert, size 07 GH330 grade for wear resistance and edge stability 7° clearance and 55° included angle for versatile turning Cylindrical hole with single-sided countersink (40°–60°) Reliable performance from the GH330 carbide grade The ISO series indexable insert is built from carbide and specified in the GH330 grade to deliver a balance of wear resistance and toughness. This composition supports a stable cutting edge and predictable tool life, making the component suitable for a wide range of turning tasks. Where roughing and finishing demands differ, the grade helps maintain dimensional accuracy while resisting abrasive wear; this reduces downtime for insert changes and supports a steady production rhythm. Precise geometry and secure mounting for consistent machining The rhombic form with a 55° included angle and 7° clearance gives a compromise between approach angle and edge strength, suitable for both external and internal operations. The insert features a 0.4 mm radius and a 2.38 mm thickness, with a cylindrical hole plus a single-sided countersink (40°–60°) for positive location and secure clamping. Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the system typically comprises the ISO insert, an appropriate external holder or boring bar, a shim/clamp set and replacement screws. Practical benefits for workshop productivity and process reliability Selecting the correct chipbreaker and the GH330 grade for the workpiece material and machining conditions reduces scrap and extends the interval between index changes. The insert’s configuration supports efficient chip control in many turning scenarios; for unstable setups, the grade’s toughness helps prevent premature edge failure, while in stable, high‑feed applications the wear resistance sustains surface quality. The combination of ISO conformity and repeatable geometry simplifies tool inventory management and speeds changeovers on the shop floor. For high‑reliability turning applications, choose the Tungaloy GH330 DCGT 070204 insert and contact Metav Werkzeuge for availability and tailored machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802807 Manufacturer article number: 6802807 SKU: 6802807-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Thickness: 2.38 mm Size: 07 Clearance angle: 7° Included angle: 55° Special features Rhombic plate form One-sided chipbreaker GH330 Tungaloy grade Cylindrical hole with single-sided countersink (40°–60°) Intended application: turning (external and internal) System components: ISO insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The GH330 grade carbide insert is formulated to balance wear resistance and toughness; material selection for machining should be matched to the GH330 properties and the chosen chipbreaker for the best results. How is the insert mounted to a toolholder? The insert uses a cylindrical hole with a single‑sided countersink (40°–60°); secure clamping requires a matching holder or boring bar plus the correct shim/clamp set and fixing screws as per the ISO system. Which machining tasks are appropriate for this insert? Designed for both external and internal turning, the insert is suitable for finishing and light to medium roughing when the workpiece, setup and chipbreaker are selected to match the application. What geometry details affect cutting behaviour? The rhombic shape with a 55° included angle, 7° clearance and a 0.4 mm corner radius determine approach angle, edge strength and surface finish potential; these parameters should be considered when planning toolpaths. Is the insert an original Tungaloy part and how is it identified? The DCGT 070204 GH330 is supplied as an original Tungaloy indexable insert and is identified by article number 6802807 and SKU 6802807‑Tungaloy in our system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 GH330 Wendeplatten - Tungaloy
Benefit from the combination of GH330 carbide grade, ISO conformity and a single-sided chipbreaker that delivers consistent chip control and long tool life. The rhombic geometry and precise 55° angle support productive turning cycles with minimal downtime; order the insert via Metav Werkzeuge or contact our advisors for application support. DCGT 070204 GH330 Tungaloy insert — ISO turning insert for versatile turning DCGT070204 GH330 is an ISO rhombic turning insert intended for general external and internal turning, engineered to balance wear resistance and edge stability. ISO rhombic insert DCGT 070204 GH330 Tungaloy carbide grade 55° insert angle for versatile turning Single-sided chipbreaker, with hole 0.4 mm corner radius, 2.38 mm thickness Consistent cutting performance that reduces downtime The GH330 carbide grade, combined with the ISO rhombic geometry, provides a robust wear resistance and reliable edge retention during turning operations. The single-sided chipbreaker is designed to promote controlled chip formation on a wide range of materials used in industry, which lowers the risk of nesting or tool damage and therefore contributes to improved machine uptime. This configuration supports steady cutting parameters and predictable tool life, so cycle planning becomes more efficient and production stability increases. Designed for secure clamping and simple integration Compatibility with toolholders is determined by form, clearance angle (7°), tolerance class, fastening method, size and thickness (2.38 mm). The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure positive seating and reliable fixation with standard clamping systems. Selecting an appropriate outer holder or boring bar together with the correct shim and clamping set completes the system and enables repeatable positioning. This allows shops to integrate the insert into existing tool setups quickly and with minimal adjustment time. Practical benefits for everyday workshop use With a corner radius of 0.4 mm and an included angle of 55°, the geometry offers a balance between edge strength and surface finish capability. The size 07 dimension and the ISO designation mean replacement and inventory management are straightforward. Where finishing and roughing overlap, this insert supports adaptable cutting strategies; its carbide construction suits a broad range of steels and common workshop materials when matched with appropriate parameters. The result is a versatile indexable insert that aids process reliability and consistent component quality. Contact Metav Werkzeuge for tailored application advice, stock availability and to request a quotation — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support. Technical Data Article number: 6802801 Manufacturer SKU: TUN6802801 SKU: 6802801-Tungaloy Model series: ISO turning inserts Designation: DCGT070204 Name: DCGT070204 GH330 Tungaloy insert Facts Clearance angle: 7° Insert angle: 55° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 07 Special features Carbide grade GH330 (Tungaloy) Rhombic plate shape Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Application: Turning (external and internal) System components: insert, suitable outer holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The DCGT070204 GH330 insert is optimised for turning a wide range of steels and common industrial materials when cutting data are adjusted to the workpiece and machine. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert promotes controlled chip formation, improving evacuation and reducing the chance of chip-related interruptions during turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the insert fits ISO-compatible holders sized for DCGT 07 geometry when matched correctly. What does the hole and countersink provide? The cylindrical hole with a one-sided countersink (40°–60°) ensures reliable seating and clamping, improving repeatability and reducing the risk of insert movement under load. Is this insert suitable for finishing operations? With a 0.4 mm corner radius and a stable carbide grade, the insert can produce good surface finishes in many turning tasks, provided cutting parameters are selected for finishing feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 coated cermet for reliable finishing and extended tool life combined with the ISO-standard DCGT070204 form for straightforward holder compatibility; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DCGT070204 GT9530 Tungaloy turning insert — coated cermet, 7° relief DCGT070204 GT9530 is an ISO-standard rhombic turning insert designed for finishing and light general-purpose turning in stable machining conditions Coated cermet GT9530 for extended tool life ISO rhombic 07 form with 7° relief Cylindrical hole with single-side countersink 0.4 mm corner radius for fine surface finish Consistent finishing and longer tool life through coated cermet technology The GT9530 coated cermet grade is designed to deliver a balance between wear resistance and surface quality. In finishing or light universal turning applications, this coating reduces flank wear while supporting a consistently good surface finish, which minimises subsequent processing. The result is fewer part reworks and more predictable component tolerances, making the insert particularly suitable where repeatability and reduced downtime matter most. ISO conformity and secure clamping for reproducible cycles As an ISO-standard rhombic insert, compatibility with the toolholder is governed by form, relief angle, tolerance class, mounting and thickness. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure a secure and repeatable clamping interface. This design reduces micro-movement under cutting forces, so cycle-to-cycle variation is minimised and machining quality is maintained across production runs. Practical machining guidance and material suitability The grade is optimised for machining steel in stable setups where a fine finish and extended life are required. With a 0.4 mm corner radius and a 55° approach angle, the geometry supports light finishing cuts and controlled chip formation. A one-sided chipbreaker assists in directing chips away from the workpiece, which contributes to improved process security and reduced risk of surface damage during finishing operations. System setup and parameter considerations for reliable results The insert functions as part of a complete ISO turning system — insert, suitable external holder or boring bar, shim/clamp and replacement screws — and should be matched to the holder by form and tolerance class. The 7° relief angle and 2.38 mm thickness support stable seating and help to maintain edge integrity under typical finishing feeds and speeds. When selecting cutting parameters, prioritise stable fixturing and moderate cutting data to exploit the grade’s wear resistance and surface-quality benefits. For procurement and technical advice on Tungaloy GT9530 turning inserts contact Metav Werkzeuge — order or request application support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6997868-Tungaloy Manufacturer SKU: TUN6997868 Manufacturer item no.: 6997868 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Size: 07 Thickness: 2.38 mm Relief angle: 7° Principle angle: 55° Corner radius: 0.4 mm Special features Grade / coating: GT9530 (coated cermet) Application: Drehen (turning) Form: rhombic Hole: with cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided FAQ What workpieces is this insert best suited for? The DCGT070204 GT9530 Tungaloy turning insert is optimised for steel machining in finishing and light general-purpose turning, offering improved surface quality and longer tool life under stable conditions. Which holder characteristics must be matched for correct fit? Compatibility is determined by insert form, relief angle, tolerance class, mounting method, size and thickness; ensure the external holder or boring bar matches the DCGT070204 geometry and seating specifications. How does the GT9530 grade improve process reliability? GT9530’s coated cermet composition offers wear resistance and consistent edge condition, which helps to maintain surface finish and extend tool life when the tool is used within recommended cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 KS05F Wendeplatten - Tungaloy
Combining the KS05F cutting grade with a 55° rhombic geometry and a 0.4 mm corner radius ensures a reliable balance of wear resistance and edge stability for demanding turning operations; order directly via Metav Werkzeuge or contact our consultants for compatibility and application advice. DCGT070204 KS05F — Tungaloy indexable turning insert, rhombic 55° The DCGT070204 KS05F is an ISO-spec rhombic indexable insert designed for external and internal turning, offering a blend of wear resistance and stable cutting-edge performance for a broad range of workpiece materials. Rhombic 55° geometry for versatile turning KS05F Tungaloy grade for wear resistance 0.4 mm corner radius for controlled chamfering Cylindrical hole with single-sided countersink High process reliability for productive turning Constructed from carbide and specified in the KS05F Tungaloy grade, this insert provides an optimised balance between wear resistance and edge stability. The result is fewer indexings and prolonged service intervals, which supports more consistent cycle times and reduced tooling costs in production environments. The grade is developed to perform under varied cutting conditions; selecting this insert helps maintain surface quality while extending usable tool life. Precision geometry for predictable part quality The 55° rhombic form combined with a 0.4 mm radius produces controlled corner engagement and stable cutting forces. This geometry is particularly useful for general turning tasks where a compromise between strength and access is required. The ISO designation ensures straightforward replacement and compatibility with standard holders; the cylindrical hole with single-sided countersink secures positive clamping, reducing vibration and contributing to repeatable dimensional results even on long or slender workpieces. System integration and suitable applications The product is intended for turning and integrates into a system comprising an ISO insert, suitable external holder or boring bar, a shim or clamp kit, and replacement screws. Typical uses include both external and internal turning operations; users should select the most appropriate chipbreaker and grade relative to workpiece material and machining stability. For practitioners requiring a simple explanation: the chipbreaker influences chip flow, the grade affects wear behaviour, and the insert geometry defines contact angle and rigidity — together these determine machining performance. For ordering, technical compatibility checks or application advice on the Tungaloy KS05F turning insert, contact Metav Werkzeuge for prompt guidance and reliable supply. Technical Data Article number: 6843411 Manufacturer article number: 6843411 SKU: 6843411-Tungaloy Manufacturer SKU: TUN6843411 Numbers / Core technical data Corner radius: 0.4 mm Plate thickness: 2.38 mm Insert angle: 55° Size designation: 07 Designs / Special features ISO designation: DCGT070204 Shape: rhombic Grade/coating: KS05F (Tungaloy) Material: carbide Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: one-sided Intended application: turning Model series: ISO indexable inserts FAQ What holders are compatible with this insert? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the DCGT070204 KS05F insert fits holders designed for ISO rhombic 55° inserts and should be matched to the correct external holder or boring bar. Which materials can be machined with this grade? The KS05F Tungaloy grade is formulated for a broad range of materials; select the chipbreaker and cutting data according to the workpiece to balance wear resistance and edge stability for the intended application. What does the 0.4 mm radius mean in practice? A 0.4 mm corner radius moderates edge strength and part edge definition: it reduces chipping risk compared with sharper radii while still enabling precise features and acceptable surface finish during turning operations. How should the chipbreaker be chosen for a specific job? Choose the chipbreaker based on material, depth of cut and machine stability — light, controlled chips for finishing versus aggressive breakers for bulk material removal; the one-sided chipbreaker on this insert can aid chip control in many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a fine cermet cutting grade, a precise 0.4 mm corner radius, and ISO compatibility for consistent, high‑quality finishing in turning operations; order the insert via Metav Werkzeuge or contact our consultants for tailored machining advice. DCGT070204 NS9530 Tungaloy indexable insert — uncoated cermet, 0.4 mm radius DCGT070204 NS9530 Tungaloy is an ISO‑standard turning indexable insert designed for finishing steel components with a sharp cutting edge and low cutting forces. Uncoated cermet grade NS9530 Fine finishing for steel components Sharp cutting edge for low cutting forces Rhombic ISO insert 07 with 7° clearance Precision finishing for demanding turning tasks The NS9530 grade is an uncoated cermet developed for finishing applications where surface quality and dimensional control are critical. The insert delivers a consistently sharp cutting edge, which reduces cutting forces and helps to achieve superior surface finishes on steel. Using a small 0.4 mm corner radius supports tight tolerance profiles and minimises vibration in light, continuous cuts. The result is reliable component quality with reduced rework and improved throughput. Stable cutting performance in continuous cuts Designed as an ISO rhombic insert (07 size) with a 7° clearance, the geometry promotes stable chip evacuation and consistent contact conditions between tool and workpiece. The one‑sided chipbreaker assists in forming short, controlled chips for continuous turning, lowering the risk of built‑up edge and improving process stability. This combination of grade and geometry is particularly suitable for low‑depth finishing passes where repeatable surface integrity and machining economy are priorities. Compatibility, mounting and practical benefits The insert is supplied in the ISO designation DCGT070204 with a cylindrical clamping hole plus single‑side countersink (40°–60°), ensuring secure fixation in compatible holders. The 2.38 mm plate thickness and the ISO‑standard form make replacement and tool setup straightforward in standard turning toolholders. Because the insert is specified for finishing, selecting an appropriate holder and cutting parameters matching the NS9530 grade and the workpiece material will maximise tool life and part quality. Contact Metav Werkzeuge for original Tungaloy NS9530 inserts and machining recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal holder compatibility and cutting data Technical data Article number: 6997934 Facts SKU: 6997934-Tungaloy Manufacturer item number: 6997934 Manufacturer SKU: TUN6997934 ISO designation: DCGT070204 Insert size: 07 Corner radius: 0.4 mm Clearance angle: 7° Included hole: cylindrical hole with single‑side countersink (40°–60°) Plate thickness: 2.38 mm Main application: Turning Special features Grade: NS9530 (uncoated cermet) Chipbreaker: one‑sided Shape: rhombic (DCGT) Series: ISO turning indexable inserts Typical use: finishing on steel Material noted: Hartmetall FAQ What machining tasks is this insert best suited for? This insert is intended for finishing operations in turning, offering NS9530 uncoated cermet performance for steel where low cutting forces and high surface finish are required. Is the DCGT070204 insert compatible with standard ISO holders? Yes, the DCGT070204 follows ISO dimensions and secures via a cylindrical clamping hole with a single‑side countersink, compatible with holders designed for rhombic DCGT inserts. Which materials can be machined with this grade? The NS9530 finishing grade is optimised for steel; it provides a sharp edge and low cutting forces suited to continuous finishing cuts on steels. How does the 0.4 mm corner radius influence the result? A 0.4 mm radius balances edge strength and fine profile control, supporting tight surface requirements while reducing the tendency to vibrate in light finishing passes. Does the insert include a coating? The NS9530 grade is supplied uncoated, offering predictable cutting behaviour and excellent surface quality in finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and ISO compatibility to maintain a steady production flow; order the insert via Metav Werkzeuge or contact our consultants for holder compatibility and application advice. DCGT 070204 NS9530 ISO turning insert for finishing – Tungaloy DCGT 070204 NS9530 is an ISO rhombic indexable insert optimised for finishing operations on steel, offering a sharp cutting edge and stable chip control for continuous turning. ISO-compatible rhombic insert for standard holders Uncoated cermet grade NS9530 for fine finishes 0.4 mm corner radius for precise edge definition Single-sided chipbreaker for continuous cuts Consistently superior surface quality with low cutting forces The uncoated cermet grade NS9530 is formulated as a finishing grade for steel, delivering a sharp cutting edge and reduced cutting forces. In practice this means fewer secondary finishing steps and a lower risk of built-up edge when performing continuous cuts with small depths of cut. The resulting surface finish is improved, which supports higher first-pass yields and reduces downstream processing time in serial production. Stable geometry for repeatable turning results The rhombic DCGT geometry and defined parameters—0.4 mm corner radius, 7° relief angle and 55° included angle—provide predictable contact conditions with the workpiece. The plate thickness of 2.38 mm and the ISO 07 size ensure mechanical stability in standard external and internal holders when the correct clamp and underlay are used. These geometric properties translate into repeatable tool life and consistent component tolerances across batches. Engineered for productive integration in machining systems As part of the ISO turning insert family, the system approach relies on a matching holder, underlay and clamping set; compatibility is determined by form, relief angle, tolerance class, clamping and thickness. The single-sided chipbreaker improves chip control during continuous turning, reducing machine downtime for cleaning and enhancing process reliability. For production environments seeking steady cycle times, this combination supports a predictable, efficient workflow. Recommended use and practical guidance for steels This finishing grade is intended primarily for continuous turning of steel with small depths of cut and a focus on surface quality rather than heavy roughing. The insert includes a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping; ensure the selected holder matches the DCGT 07 form and the thickness specification. For material-specific feed and speed suggestions or to verify holder compatibility, contact our technical advisors — email info@metav-werkzeuge.com or call +49 2822 7131930. For tailored machining advice and availability of the Tungaloy DCGT070204 NS9530 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our consultants will advise on holder compatibility, recommended cutting parameters and stock availability. Technical data Article number: 6997925 Manufacturer article number: 6997925 SKU: 6997925-Tungaloy Manufacturer SKU: TUN6997925 Numbers Corner radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 7° Included angle: 55° Plate size: 07 Design and features Shape: rhombic Hole: cylindrical hole with one‑sided countersink (40°–60°) Grade: NS9530 (uncoated cermet) Material: carbide Chipbreaker: single-sided Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What is the primary application for this insert? The DCGT070204 NS9530 insert from Tungaloy is designed for finishing operations on steel, particularly continuous turning with small depths of cut to achieve high surface quality. Is the NS9530 grade coated or uncoated? The NS9530 grade is an uncoated cermet, offering a very sharp cutting edge and low cutting forces, which benefits surface finish and dimensional stability. Which holder characteristics must match the insert? Compatible holders must match the DCGT form, relief angle (7°), tolerance class, clamping method, plate size (07) and thickness (2.38 mm) to ensure secure seating and repeatable performance. How does the chipbreaker affect machining? The single-sided chipbreaker is optimised for continuous cuts; it improves chip control during finishing, reducing the risk of tangling and helping to safeguard workpiece surface quality. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning provided the holder allows correct orientation and clamping for the DCGT 07 geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 NS9530 Wendeplatten - Tungaloy
The product data contains a contradiction: one entry specifies cemented carbide while another specifies uncoated cermet as the cutting material; this inconsistency needs to be addressed and clarified to ensure accuracy and consistency in the information provided, as it is crucial to verify the correct material before a product description can be produced and shared with customers or stakeholders, given that the choice of material significantly impacts the product's performance, application suitability, and overall quality, making it essential to resolve this discrepancy promptly to avoid potential confusion or misrepresentation in the final product documentation.
DCGT 070204 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025 for consistent edge stability and the ISO rhombic form for broad holder compatibility to maintain productive turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DCGT 070204 SH7025 turning insert by Tungaloy — rhombic ISO insert with 55° cutting angle A DCGT070204 SH7025 indexable insert for ISO-standard turning, designed for stable cutting edges and reliable performance in variable engagement conditions. Coated carbide grade SH7025 for stable cutting ISO rhombic insert, 55° cutting angle 7° clearance with 0.4 mm corner radius Cylindrical hole with single-sided countersink Increased machining consistency for mixed engagement The combination of a coated carbide substrate and the SH7025 grade delivers a balance of toughness and wear resistance that suits interrupted cuts and variable entry angles. The 55° geometry of the rhombic insert gives a predictable cutting direction and good surface finish, while the single-sided chipbreaker controls chip formation under transient loads. This results in fewer tool changes and more stable output when machining with smaller holders or under changing cutting conditions. Easy integration with existing toolholders and quick set-up Compatibility is ensured by ISO standardisation: form, clearance angle, tolerance class, fastening and plate thickness determine the correct seating. With a plate thickness of 2.38 mm and a 7° clearance, the insert fits standard turning holders designed for size 07 rhombic plates. The cylindrical hole with one-sided countersink (40°–60°) secures reliable clamping and repeatable positioning, simplifying tool setup and reducing downtime during insert replacement. Practical scope: materials, applications and selection advice This indexable insert is intended primarily for turning operations and performs best when the chipbreaker and grade are matched to the workpiece and process stability. The SH7025 coated grade is particularly suitable where a tough cutting edge is needed, such as in unstable setups or when machining tougher materials with small insert engagement. Select the one-sided chipbreaker and grade according to material type and desired surface finish to achieve an efficient, economical machining result. Contact Metav Werkzeuge for ordering, application recommendations or to discuss compatibility with existing holders; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6967471 SKU: 6967471-Tungaloy Manufacturer SKU: TUN6967471 Model series: ISO-Drehwendeschneidplatten Label: DCGT070204 SH7025 Tungaloy-Wendeplatte Core specifications Cutting angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Corner radius: 0.4 mm Plate size: 07 Features and compatibility Coated carbide grade SH7025 Rhombic plate form One-sided chipbreaker With cylindrical hole + single-sided countersink (40°–60°) ISO-standard indexable turning insert Intended application: turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ Which holders are compatible with this insert? Compatibility depends on the holder accepting ISO rhombic size 07 inserts with a 2.38 mm thickness and the specified hole/countersink style; the DCGT070204 SH7025 insert is designed for standard ISO-type turning holders matching these dimensions. For which turning tasks is the SH7025 grade recommended? The SH7025 coated carbide grade is recommended for turning tasks requiring a tough, edge-stable insert—especially useful with small tools or when engagement conditions vary, where consistent performance and reliable edge life are priorities. How does the single-sided chipbreaker affect performance? A single-sided chipbreaker on this insert promotes controlled chip formation for many turning scenarios; combined with the SH7025 grade it improves process stability and reduces the risk of poor chip evacuation during interrupted cuts. What are the key dimensions to check before purchasing? Verify plate size (07), plate thickness (2.38 mm), corner radius (0.4 mm), clearance angle (7°) and the hole/countersink style to ensure a correct fit with the existing holder and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH7025 grade, a 0.4 mm corner radius and ISO conformity for reliable, repeatable turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCGT 070204 SH7025 – Tungaloy indexable turning insert, rhombic 07, 7° clearance A DCGT070204 SH7025 indexable turning insert engineered for external and internal turning, offering a rhombic geometry with a single-sided chipbreaker for controlled chip formation in variable engagement conditions DCGT 070204 rhombic insert, 7° clearance Coated carbide grade SH7025 for tough cutting Single-sided chipbreaker for stable chip control 0.4 mm corner radius for reliable edge strength Cylindrical hole with one-sided 40°–60° countersink Reliable cutting behaviour under changing conditions The coated carbide composition and the SH7025 grade deliver a balance of toughness and edge stability, especially useful in small tools or where engagement varies. The combination of a 0.4 mm corner radius and a single-sided chipbreaker reduces the risk of premature edge failure and produces predictable chips, which improves process stability. For engineers seeking consistent cycle times, the insert’s composition helps to maintain cutting performance when feed and depth vary, translating into fewer interruptions and more productive machining sequences. Seamless integration with ISO toolholders As an ISO-standard turning insert, the geometry and dimensions follow established norms, so compatibility with a matching toolholder is ensured when form, clearance, tolerance class, clamping method, size and thickness correspond. The rhombic 07 shape and 7° clearance permit versatile approach angles for external and internal turning. The insert’s mounting detail — a cylindrical hole with a one-sided 40°–60° countersink — enables secure clamping and straightforward replacement, reducing changeover time and simplifying tooling logistics on the shop floor. Durability and practical benefits that reduce downtime A thickness of 2.38 mm and a compact design support rigidity in smaller tool assemblies, helping to lower vibration and enhance surface finish. The SH7025 coating contributes to stable edge retention under intermittent cuts, which is particularly advantageous in batch production or mixed-lot manufacturing. For operations aiming to cut total cost of ownership, the insert’s wear resistance and predictable life span lessen the frequency of tool swaps and rework, thereby improving overall equipment effectiveness. Choosing the right insert for the material and task Selection of chipbreaker style and grade should match the workpiece material and machining strategy; the single-sided chipbreaker in this insert is optimised for controlled chip formation across a wide range of turning tasks. When machining uncertain or mixed batches, a robust, edge-stable grade such as SH7025 reduces the sensitivity to changing conditions. If further guidance is required on matching the insert to specific alloys or feeds and speeds, technical consultation is available to align cutting data with production goals. Contact Metav Werkzeuge for availability and tailored recommendations on the DCGT 070204 SH7025 insert and receive application-specific support from our technical team Technical data Article number: 6967458 Manufacturer SKU: TUN6967458 Model series: ISO-Drehwendeschneidplatten SKU: 6967458-Tungaloy Facts Corner radius: 0.4 mm Clearance (relief) angle: 7° Included angle: 55° Insert size: 07 Thickness: 2.38 mm Special features Coated carbide grade SH7025 Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided 40°–60° countersink ISO-standardised turning insert Suitable for external and internal turning Compatibility determined by form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert best suited for? The SH7025 grade on the DCGT 070204 insert is formulated as a tough, edge-stable coated carbide suitable for a broad range of turning tasks, especially where variable engagement or smaller tool geometries are used. How does the single-sided chipbreaker affect chip control? A single-sided chipbreaker on this turning insert promotes predictable chip formation and evacuation under common turning conditions, improving machining stability and reducing the likelihood of chip-related interruptions. Which toolholders are compatible with this ISO insert? Compatibility is achieved when the toolholder matches the insert form, clearance angle, tolerance class, clamping arrangement, size and thickness; the DCGT 070204 conforms to ISO dimensions for straightforward matching with standard holders. What does the ISO code 070204 indicate? The ISO code denotes geometry and size characteristics of the indexable insert; for the DCGT 070204 this corresponds to a rhombic 07 form with the specified nose radius and thickness, enabling proper selection for the intended turning application. Can this insert be used for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning; its rhombic geometry and 7° clearance provide flexibility for various approach angles while the SH7025 grade maintains edge stability in variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of the SH7025 coated carbide grade and precise rhombic geometry to maintain stable cutting edges and consistent surface finishes; order directly via Metav Werkzeuge or consult our advisors for selection support. DCGT070204 SH7025 indexable turning insert, rhombic 55° — Tungaloy A DCGT070204 SH7025 indexable insert designed for external and internal turning, offering a robust coated carbide grade for variable engagement conditions and tool-change flexibility. SH7025 coated carbide for stable cutting Rhombic 55° geometry for versatile turning 0.4 mm nose radius for precise finishes Cylindrical hole with countersink for secure clamping Engineered grade for consistent cutting performance The selected SH7025 is a coated carbide grade formulated for toughness and stable cutting edge behaviour, particularly effective where smaller tools or fluctuating engagement occur. The coating enhances wear resistance while the substrate maintains impact strength, which together support longer tool life and repeatable results. This combination reduces downtime from insert changes and helps to stabilise part quality in mixed-production environments. Geometry that balances versatility and finish quality The rhombic geometry with a 55° approach angle and a 0.4 mm nose radius delivers a compromise between chip control and surface finish. The compact nose radius is suited to fine turning and light finishing passes, while the 55° form provides accessibility for both external profiles and moderate internal contours. These geometric choices make the insert a reliable option when a balance of precision and general-purpose capability is required. ISO conformity and secure clamping for process safety Manufactured as an ISO-compliant plate, compatibility with the toolholder depends on form, 7° clearance, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with a single-sided 40°–60° countersink, enabling secure seating and consistent clamping forces in approved holders. The plate thickness of 2.38 mm and size designation 07 are important for ensuring the correct seat and minimising vibration during interrupted cuts. Practical system setup and selection guidance The insert functions as part of a complete turning system that typically comprises the indexable plate, a matching external holder or boring bar, a shim/clamping set and replacement screws. Selecting the appropriate chipbreaker and feed/speed combination according to the workpiece and machining stability is essential for optimised performance. For operations with changing engagement, favour grades and chip control geometries that prioritise edge resilience over sheer hardness to avoid premature edge breakdown. For high-reliability turning with Tungaloy’s SH7025 grade, contact Metav Werkzeuge for bespoke advice and procurement: info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6967472 SKU: 6967472-Tungaloy Manufacturer SKU: TUN6967472 Manufacturer item number: 6967472 Manufacturer: Tungaloy Facts Nose radius: 0.4 mm Approach angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Size: 07 Special features Rhombic plate form Cylindrical hole with single-sided countersink 40°–60° SH7025 coated carbide grade One-sided chipbreaker ISO indexable turning insert Application: external and internal turning System components: insert, external holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert intended for? The SH7025 grade insert is designed for general turning tasks; selection of a suitable chipbreaker and cutting parameters should be based on the specific workpiece material and machining stability for optimal results. How is compatibility with a holder determined? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; verify that the holder matches the insert's ISO profile and the 2.38 mm plate thickness. What does the SH7025 designation signify? SH7025 denotes a coated carbide grade focused on toughness and edge stability; this grade is chosen to deliver reliable performance under variable engagement and smaller-tool applications. What clamping features does the insert have? The plate is supplied with a cylindrical hole and a single-sided 40°–60° countersink, enabling secure clamping and repeatable seating in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 SH725 Wendeplatten - Tungaloy
Take advantage of a coated carbide SH725 grade and a 0.4 mm corner radius for stable cutting in variable turning conditions; the rhombic ISO insert with a 7° clearance angle ensures consistent engagement and easy integration into standard holders — order the insert via Metav Werkzeuge or consult our technical advisers for selection support. DCGT070204 SH725 rhombic indexable turning insert by Tungaloy — rhombic form, 7° clearance A DCGT070204 SH725 indexable insert designed for general external and internal turning, offering a balanced combination of cutting-edge stability and compatibility with ISO-standard toolholders. *Coated carbide grade SH725 for stable cutting *Rhombic insert form 07 with 0.4 mm corner radius *7° clearance angle for reliable engagement *Cylindrical hole with single-sided countersink Consistent cutting performance for variable turning tasks The insert delivers stable cutting-edge behaviour through the SH725 coated carbide grade, developed for toughness and edge security in fluctuating engagement conditions. The 0.4 mm corner radius moderates cutting forces and improves edge strength, making the component particularly suitable for smaller tool geometries and interrupted cuts. Compatibility with standard ISO holders is determined by form, clearance angle (7°), tolerance class, fixation and plate thickness; this ensures the insert integrates reliably into existing tool systems without compromise to repeatability. Improved chip control and extended usable life A single-sided chipbreaker profile promotes controlled chip formation and evacuation, reducing the risk of chatter and surface blemishes during turning operations. The rhombic geometry combined with the coating properties of SH725 enhances wear resistance and allows longer effective tool life under mixed cutting regimes. For workshops aiming to increase throughput while maintaining surface quality, this plate balances productivity and process security by lowering the frequency of index changes and regrinds. Practical selection and system integration guidance The insert is part of an ISO-standard system build: indexable plate, matching external holder or boring bar, backing/locking set and replacement screws. Plate thickness of 2.38 mm and the 07 size classification must match the chosen holder to guarantee clamping stability. The insert’s cylindrical hole with a single-sided countersink (40°–60°) secures repeatable seating and torque transmission. When choosing a chipbreaker and grade, align the SH725 toughness with workpiece material and the expected engagement stability; this reduces downtime and supports predictable tool-change intervals. Contact Metav Werkzeuge for tailored technical advice on integrating Tungaloy SH725 indexable inserts into production, or for procurement via our specialist team at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6784491 Manufacturer SKU: TUN6784491 Label: DCGT070204 SH725 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.4 mm Clearance angle: 7° Plate thickness: 2.38 mm Size: 07 ISO designation: 070204 Tool angle: 55° Features Material: coated carbide Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning System components: compatible with ISO holders, backing/locking set and replacement screws FAQ What materials can this insert machine effectively? The Tungaloy DCGT070204 SH725 insert is a coated carbide grade intended for a broad range of turning tasks; its toughness and chip control make it suitable for many steels and mixed materials where a stable cutting edge is required. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and distributes cutting forces more evenly, improving tool life and reducing the likelihood of edge chipping during interrupted cuts or variable engagement. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle (7°), tolerance class, fixation method, size and plate thickness; the insert is manufactured to ISO dimensions to ensure integration with matching ISO-standard holders. What advantage does the single-sided chipbreaker provide? The single-sided chipbreaker concentrates chip control in the primary cutting zone, supporting predictable chip flow and cleaner surfaces in both external and internal turning operations. Can this insert be used with small toolholders or variable cutting conditions? Yes — the SH725 grade was selected for edge stability in smaller tools and changing engagement scenarios, offering reliable performance under such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com