DCMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 grade that balances a sharp cutting edge with stability and a rhombic 07 form with 7° relief for reliable turning of stainless steel; order directly via Metav Werkzeuge or consult our technical team for application guidance. DCMT070204 AH6225 Indexable Insert for Turning (ISO 070204) — Tungaloy The DCMT070204 AH6225 is an ISO rhombic indexable insert designed for external and internal turning, engineered to perform on stainless steel with a sharp yet stable cutting edge PVD-coated AH6225 carbide for stainless steel Rhombic 07 form with 7° relief 0.4 mm corner radius for profile and strength Cylindrical hole with 40°–60° countersink Reliable machining performance for stainless steel The PVD-coated AH6225 grade is formulated as a universal option for machining stainless steel, combining a keen initial cutting edge with sufficient edge stability for medium cutting depths and variable conditions. The coating reduces built-up edge and increases thermal resistance, which contributes to consistent surface finish and longer tool life under interrupted cuts. For operations where a balance of sharpness and wear resistance is required, this grade supports steady productivity and predictable results. Repeatable clamping and geometry for series production Compatibility with toolholders is defined by form, relief angle, tolerance, fastening and thickness; the ISO geometry and rhombic 07 shape deliver a positive cutting action and good access to shoulders. The 7° relief angle reduces flank rubbing and helps maintain dimensional accuracy across a production run, while the 0.4 mm corner radius offers a compromise between strength and detail on radiused profiles. The design and single-sided chipbreaker promote stable chip formation and repeatable performance, making this insert suitable where process stability and predictable tool life are primary concerns. Fast set-up and secure retention reduce downtime A cylindrical hole with a one-sided countersink (40°–60°) ensures secure mechanical clamping in a matching ISO seat, while the 2.38 mm thickness contributes to rigidity in the clamped assembly. These features support quick insert changes and reliable seating, which reduces set-up time and minimises production interruptions. The overall system concept—ISO insert, appropriate holder, support pads and replacement screws—facilitates straightforward inventory management and rapid replacement during scheduled maintenance or tool changeovers. For demanding stainless steel turning, choose the Tungaloy DCMT070204 AH6225 insert and contact Metav Werkzeuge for availability and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947689-Tungaloy Manufacturer article number: 6947689 Manufacturer SKU: TUN6947689 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Radius: 0.4 mm Thickness: 2.38 mm Size: 07 Relief angle: 7° Lead angle: 55° Special features ISO designation: DCMT070204 Grade/coating: AH6225 (PVD-coated) Form: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Turning Designed for stainless steel FAQ Which materials is this insert suitable for? The insert is designed primarily for stainless steel; the AH6225 grade and PVD coating optimise cutting performance and wear resistance when machining stainless materials. How is holder compatibility determined? Compatibility depends on insert form, relief angle, tolerance class, fastening, size and thickness; the ISO geometry of the DCMT070204 AH6225 insert matches holders specified for rhombic 07 ISO inserts. What advantage does a 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength and improves surface finish on radiused features while still allowing precise profiling during medium turning operations. What does the hole and countersink specification mean for clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures stable mechanical clamping in the matching seat, improving repeatability and reducing the risk of insert movement under load. Which cut types and positions suit this insert? The geometry and single-sided chipbreaker suit external and internal turning where a balance of edge sharpness and stability is required, particularly for medium-depth cuts in stainless steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, yet stable cutting edge and a universal PVD-coated grade for consistent performance in turning operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT070204 AH6225 indexable turning insert — PVD-coated carbide, 55° geometry (Tungaloy) The DCMT070204 AH6225 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for stainless steels with a sharp, stable cutting edge and reliable chip control. PVD-coated carbide for improved wear resistance Universal grade for stainless steels AH6225 Rhombic 07 geometry with 55° included angle 0.4 mm corner radius and one-sided chipbreaker Longer tool life through a balanced PVD coating The combination of a PVD-coated surface and a high-quality carbide substrate gives a measurable improvement in wear behaviour for medium-turning operations. The AH6225 grade is formulated as a universal solution for a range of rostfrei steels, providing a stable cutting edge that reduces flank wear and extends insert life. A PVD finish lowers the friction at the cutting interface and improves oxidation resistance, which translates into fewer indexings and lower tooling costs per part in production runs. Precision geometry that improves process reliability The rhombic 07 format with a 55° included angle and 7° clearance ensures predictable cutting forces and easy tool access in confined features. The 0.4 mm corner radius balances edge strength with profile fidelity, making it suitable for both finishing and light roughing where surface finish and dimensional control matter. The one-sided chipbreaker promotes consistent chip formation; explained simply, it shapes the chips to avoid entanglement and to facilitate safe evacuation from the cut, reducing the risk of tool interruption and machine downtime. Seamless integration into ISO-based tool systems As an ISO-standard insert, the component fits a wide range of established toolholders; the design includes a cylindrical hole with single-side countersink (40°–60°) for secure clamping and repeatable seating. The plate thickness of 2.38 mm and the 07 size make it compatible with standard external cutters and boring bars when the correct clamping kit and screw are used. This predictability shortens set-up times and supports consistent results across batches, improving throughput without compromising part quality. For application advice or to secure supply of Tungaloy DCMT070204 AH6225 indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for fast, expert assistance and reliable delivery. Technical data Article number: 6829623 SKU: 6829623-Tungaloy Manufacturer SKU: TUN6829623 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: AH6225 Application: turning Shape: rhombic Facts Included angle: 55° Clearance (relief) angle: 7° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 07 Countersink angle: 40°–60° Special features PVD-coated carbide grade AH6225 Universal for stainless steels One-sided chipbreaker Rhombic 07 geometry With hole: cylindrical + single-side countersink ISO designation DCMT070204 Sharp yet stable cutting edge for medium cutting FAQ What materials is this insert best suited for? The DCMT070204 AH6225 Tungaloy indexable turning insert (SKU 6829623-Tungaloy) is designed as a universal grade especially for stainless steels and performs well across a broad range of rostfrei materials. Can this insert be used for internal and external turning? Yes, the ISO-standard geometry and rhombic 07 form make the insert suitable for both external and internal turning tasks when paired with the appropriate holder. How does the PVD coating affect performance? The PVD-coated surface on the AH6225 grade reduces friction and improves oxidation resistance, which increases wear life and maintains a stable cutting edge under variable conditions. What clamping arrangement is required for this insert? The insert features a cylindrical hole with a single-side countersink (40°–60°) and is designed for secure clamping in standard ISO toolholders; correct screws and underlay must be used for reliable seating. Which insert dimensions are critical for holder compatibility? Key dimensions are the size 07, thickness 2.38 mm, 0.4 mm corner radius and the specified relief and included angles; these determine the matching holder geometry and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability and broad material coverage with a universal PVD-coated grade for rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for cutting data and holder compatibility. DCMT070204 AH6225 ISO turning insert for turning — Tungaloy The DCMT070204 AH6225 is an ISO-format turning insert designed for external and internal turning applications, offering a sharp but stable cutting edge optimised for rostfreier Stahl. PVD-coated carbide grade AH6225 Universal for rostfreier Stahl applications Rhombic 07 form with 7° clearance Cylindrical hole with 40°–60° countersink Consistent performance for rostfreier Stahl machining The PVD-coated carbide grade AH6225 delivers a balanced combination of edge sharpness and toughness that suits varying cutting conditions. As a member of the ISO turning insert family, the component provides reproducible results when paired with a correctly specified holder; the rhombic 07 form and 7° clearance ensure stable contact geometry and reduced vibration. The single-sided chipbreaker assists in chip control during medium-cut operations, translating into predictable tool life and fewer process interruptions. Compatibility and secure clamping in ISO systems Designed to meet ISO tolerances, the insert interfaces with holders according to form, clearance, tolerance class, fastening method, size and thickness. The cylindrical hole with a single-sided countersink (40°–60°) supports secure clamping and simple replacement without additional adjustments. This standardised interface reduces setup time in production lines and allows integration into existing tool systems, making the insert a practical choice for workshops seeking a direct replacement or an upgrade in rostfreier Stahl machining. Practical benefits: setup, handling and repeatability A corner radius of 0.4 mm contributes to reliable edge strength while maintaining surface integrity at the cut. The 2.38 mm plate thickness and rhombic geometry provide mechanical stability during external and internal turning, lowering the risk of edge chipping under interrupted cuts. Where cycle time and consistent surface finish matter, the insert’s construction supports repeatable performance and predictable maintenance intervals, aiding planning for tool changeovers and stocking. Choosing the right grade and chipbreaker for the job The AH6225 grade is intended as a universal option for rostfreier Stahl and is optimised for medium cutting conditions and variable stability. Selection of the matching chipbreaker and grade should follow the workpiece material, machining strategy and machine rigidity. When optimised, the grade helps to maintain an efficient cutting process with balanced wear behaviour and surface quality, contributing directly to higher throughput and lower scrap rates. Request technical consultation or place an order via Metav Werkzeuge for the Tungaloy AH6225 insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery details Technical Data Article number: 6903284-Tungaloy Manufacturer article number: 6903284 Manufacturer SKU: TUN6903284 SKU: 6903284-Tungaloy Model series: ISO turning indexable insert series Facts Corner radius: 0.4 mm Thickness: 2.38 mm Insert size: 07 Clearance angle: 7° Approach angle: 55° Special features PVD-coated carbide grade AH6225 Rhombic 07 plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suited for external and internal turning Universal grade for rostfreier Stahl applications ISO-format indexable turning insert FAQ What materials is this insert suited for? The DCMT070204 AH6225 insert is specified as a universal grade for rostfreier Stahl and is primarily intended for stainless-steel turning tasks. How does the chipbreaker affect performance? The single-sided chipbreaker on the Tungaloy DCMT070204 helps control chip formation during medium-depth cuts, improving stability and surface finish while reducing the likelihood of entangling long chips. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; the DCMT070204 conforms to ISO dimensions, enabling fitment in standard ISO turning holders that accept rhombic 07 plates. What is the recommended corner radius for finishing operations? The insert features a 0.4 mm corner radius, which balances edge strength and surface quality and is suitable for a range of finishing and light-roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6235 Wendeplatten - Tungaloy
Combining a PVD-coated AH6235 grade with a 0.4 mm nose radius and a 55° cutting geometry delivers stable performance for interrupted turning of stainless steel; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCMT 070204 AH6235 Turning Insert — Tungaloy (rhombic 07, 55° cutting angle) DCMT070204 AH6235 Tungaloy is an ISO-format indexable turning insert designed for external and internal turning where interrupted cuts or unstable conditions demand a tougher grade and reliable edge control PVD-coated carbide grade AH6235 Optimised for stainless steel machining Rhombic 07 form with 55° cutting angle Cylindrical hole with 40°–60° countersink Durable grade for challenging stainless applications The AH6235 PVD coating provides a tougher, more fracture-resistant layer suited to operations with increased risk of chipping. As a cemented carbide substrate with a protective film, this grade maintains edge integrity under variable cutting forces, which reduces unplanned tool changes and rework. The result is a predictable process window when machining stainless steel or other alloyed steels in interrupted turning conditions. Geometry tuned for stable chip control and surface quality The rhombic 07 form and 55° cutting angle combine to give a robust cutting edge with good access to shoulders and profiles. The 0.4 mm nose radius balances edge strength with achievable surface finish; the single-sided chipbreaker supports controlled chip formation during both roughing and finishing passes. These geometry choices translate into consistent surface quality and repeatable cycle times on production runs. Clamping and seat compatibility for secure performance As an ISO-series insert, fit and functionality depend on matching holder form, clearance, tolerance class, attachment method, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure secure seating in compatible holders and to prevent rotation under load. Proper seat selection extends insert life and stabilises tool behaviour in high-vibration setups. Practical machining advice for longer tool life For best results in turning stainless steel and similar materials, combine the insert with a rigid holder and appropriate cutting parameters to avoid thermal work hardening. The PVD-coated AH6235 excels in interrupted cuts; however, optimised feed and moderate cutting speeds will preserve the coating and substrate. Regular inspection of edge condition and replacing inserts before catastrophic failure supports consistent productivity. Why this insert benefits production workflows Choosing this indexable insert provides a balance of toughness and wear resistance suited to unpredictable chipbreak and interrupted operations. The ISO format facilitates quick replacement and inventory management while the proven AH6235 grade promotes process reliability and lower scrap rates. For workshops aiming to improve uptime and reproducibility, the combination of geometry and grade is a pragmatic choice. For tailored application guidance on the DCMT070204 AH6235 Tungaloy turning insert and recommendations for holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice and parts ordering. Technical data Article number: 6890173 SKU: 6890173-Tungaloy Manufacturer SKU: TUN6890173 Series: ISO turning inserts Type designation: DCMT070204 Facts Material: cemented carbide Grade/coating: AH6235 (PVD-coated) Thickness: 2.38 mm Size: 07 Nose radius: 0.4 mm Relief angle: 7° Cutting angle: 55° Special features Rhombic insert form Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Suitable for interrupted cuts and applications at risk of edge breakout Recommended for stainless steel and alloyed steels FAQ What machining tasks is this insert best suited to? This DCMT070204 AH6235 Tungaloy turning insert is intended for external and internal turning, especially where interrupted cuts or unstable conditions require a tougher, PVD-coated carbide grade. Which materials can be machined with this grade? The AH6235 grade is optimised for stainless steel and similar alloyed steels; it handles interrupted machining and situations with elevated chipping risk. How does the insert secure to the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive seating and clamping in compatible ISO holders. What benefits does the 0.4 mm radius provide? A 0.4 mm nose radius improves edge strength while still allowing good surface finish control, balancing robustness with achievable part quality. Is this an ISO-standard insert for easy replacement? Yes — the DCMT070204 designation conforms to ISO turning insert formats, facilitating quick indexability and inventory management; SKU: 6890173-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6235 Wendeplatten - Tungaloy
Reliable edge stability, a PVD-coated AH6235 grade and ISO geometry combine to deliver consistent turning performance for demanding applications; order the insert directly via Metav Werkzeuge or consult our technical team for matching holders and optimisation. DCMT 070204 AH6235 indexable turning insert for ISO turning – Tungaloy A DCMT070204 AH6235 indexable turning insert engineered for external and internal turning, optimised for interrupted cuts and machining of stainless steels DCMT070204 geometry for ISO turning applications PVD-coated carbide AH6235 for stainless steel One-sided chipbreaker for controlled chip flow Cylindrical hole with 40°–60° countersink Consistent cutting performance where edge security matters The combination of an ISO rhombic geometry and a robust, PVD-coated carbide grade delivers measurable stability in serial turning. The insert’s AH6235 composition is designed as a tougher grade that tolerates interruptions and reduces the risk of edge chipping; this converts into longer effective tool life and fewer tool changes on the shop floor. For process planners, the predictable wear behaviour of this insert supports reliable cycle-time planning and repeatable surface finish outcomes. Fewer interruptions and better chip control for productivity gains A one-sided chipbreaker matched to the insert geometry channels chips away from the cutting zone and helps prevent entanglement during interrupted turning. The presence of a cylindrical hole with a 40°–60° countersink ensures secure seating in compatible holders and contributes to repeatable clamping forces. Together, these features reduce downtime and enhance throughput, particularly in operations where stable chip formation and evacuation directly affect productivity. Simple integration into ISO tool systems to streamline setup As an ISO-standardised insert, compatibility with external holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert’s 7° clearance angle, 55° approach angle and 0.4 mm corner radius offer a balance between edge strength and surface finish versatility. The thin 2.38 mm body thickness and rhombic shape suit compact toolheads and permit efficient indexing, helping maintenance teams and operators perform fast, error‑resistant tool changes. For technical advice on optimising turning processes with Tungaloy AH6235 inserts or to order matched inserts and clamping kits, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, application-focused support Technical data Article number: 6890180 Manufacturer SKU: TUN6890180 Brand: Tungaloy Facts Corner radius: 0.4 mm Clearance angle: 7° Thickness: 2.38 mm Approach angle: 55° Size code: 07 Special features Grade: AH6235 (PVD-coated carbide) One-sided chipbreaker Rhombic plate form Cylindrical hole + one-sided countersink (40°–60°) ISO indexable turning insert for external and internal turning Suitable for interrupted cuts and stainless steels FAQ What materials is this insert suitable for? The DCMT070204 AH6235 insert is formulated for machining stainless steels and is especially effective in applications with interrupted cuts where edge toughness is required. How does the AH6235 grade help in interrupted cutting? The AH6235 PVD-coated carbide grade combines toughness with wear resistance to reduce chipping during interrupted cuts, improving tool life and process reliability. Which geometric values define compatibility with holders? Compatibility depends on the insert’s ISO form, 7° clearance angle, 55° approach angle, thickness (2.38 mm) and size code 07; holders must match these parameters for secure clamping. Does this insert provide good chip control? Yes, the one-sided chipbreaker and the rhombic geometry support controlled chip flow, reducing the risk of built-up edge and facilitating stable evacuation. Is the insert ISO-standard and easy to index? The insert follows ISO dimensions for indexable turning plates, enabling straightforward indexing and replacement in standard ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH6235), precise 7° clearance geometry and a compact 0.4 mm nose radius for efficient turning of challenging materials; order the DCMT070204 AH6235 insert directly via Metav Werkzeuge or ask the consultants if needed. DCMT 070204 AH6235 turning insert for turning by Tungaloy — PVD-coated carbide, 7° clearance DCMT070204 AH6235 is an ISO rhombic turning insert designed for external and internal turning, optimised for interrupted cuts and materials with a tendency to work-harden PVD-coated carbide AH6235 Optimised for rostfreier Stahl 7° clearance angle for stable cutting 0.4 mm nose radius for accurate profiles Rhombic ISO insert with central hole High-performance grade for demanding rostfreier Stahl applications The PVD-coated cutting grade AH6235 is formulated as a tougher option for operations with elevated breakout risk, such as interrupted cuts and machining of rostfreier Stahl. This tougher microstructure increases resistance to chipping and extends effective edge life under unstable cutting conditions. The combination of the hard PVD layer and a wear-resistant substrate helps maintain dimensional accuracy over longer tool life, reducing tool-change frequency and contributing to predictable production cycles. The result is improved process security and reduced per-part tool costs while retaining consistent performance in demanding turning tasks. Precise geometry that supports surface finish and repeatability A modest 0.4 mm nose radius and a 7° clearance angle provide a balance between profile control and cutting stability. The rhombic form and the insert’s 55° included angle deliver accessible cutting edges for both external and internal turning, while the single-sided chipbreaker controls chip flow for common turning feeds. These geometric choices deliver a reproducible contact geometry that supports consistent surface quality and predictable tool behaviour. The small nose radius enables accurate profiling and fine tolerances, whereas the clearance geometry helps avoid rubbing and excessive flank wear during through-cut and finishing passes. ISO-conform compatibility and system-based efficiency As an ISO-standard insert, compatibility with a suitable holder depends on form, clearance angle, tolerance class, fastening, size and thickness. The system typically comprises the insert, a matching external holder or boring bar, a shim/seat and securing screws. The insert’s central hole with a cylindrical bore and single-side countersink (40°–60°) ensures secure clamping and straightforward index changes. Using standardised components simplifies inventory management and speeds up regrinding or replacement procedures. When selected to match machine rigidity and workpiece conditions, this insert contributes to shortened set-up times and consistent throughput in series production. Contact Metav Werkzeuge today for an application check or to request compatible holders and spare screws for the DCMT070204 AH6235 insert Technical data Article number: 6890176 Manufacturer SKU: TUN6890176 SKU: 6890176-Tungaloy Core measurements Size: 07 Thickness: 2.38 mm Clearance angle: 7° Nose radius: 0.4 mm Included angle: 55° Features & materials Material: Hartmetall Coating / grade: AH6235 (PVD-coated) Shape: rhombic Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Series: ISO turning inserts FAQ What materials is this insert intended for? The DCMT070204 AH6235 insert is intended primarily for rostfreier Stahl and other materials where a tougher grade is required; the AH6235 coating/substrate combination is chosen for interrupted cuts and applications with increased breakout risk. How does the 0.4 mm nose radius affect finishing? A 0.4 mm nose radius provides accurate profile reproduction and supports fine surface finishes while maintaining edge strength for short interrupted cuts. Which holder characteristics determine compatibility? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters with the holder ensures secure clamping and correct cutting geometry. What type of chip control does this insert use? This insert uses a single-sided chipbreaker that, combined with the rhombic geometry, promotes controlled chip flow for standard turning feeds and helps maintain stable cutting conditions. Is the insert suitable for internal turning? Yes, the ISO rhombic form and the included angle support both external and internal turning operations when paired with an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH725 Wendeplatten - Tungaloy
Benefit from a combination of process reliability, versatile geometry and simple holder compatibility to maintain steady turning operations; order the inserts through Metav Werkzeuge or consult their specialists for application advice. DCMT 070204 AH725 turning indexable insert for Drehen by Tungaloy — PVD-coated carbide, 7° clearance DCMT 070204 AH725 is an ISO‑standard rhombic turning insert designed for external and internal turning operations where process security and material versatility are required PVD-coated cemented carbide AH725 Universal grade for Stahl and rostfreier Stahl Rhombic ISO insert, 55° cutting angle One-sided chipbreaker, cylindrical hole with countersink Consistent process security through PVD coating and AH725 grade The AH725 grade combines a PVD-coated surface with a tough carbide substrate to reduce flank wear and improve edge stability. This results in greater reliability when machining mixed batches of Stahl and rostfreier Stahl, especially in setups where tool change frequency and part variety demand a universally resistant grade. The coating also helps to maintain consistent cutting performance under fluctuating cutting conditions, which supports predictable productivity. Geometry that delivers accuracy with small‑radius features With a 55° cutting angle and a 0.4 mm radius, the rhombic DCMT070204 geometry provides the balance between edge strength and form accuracy needed for detail work and finishing passes. The 2.38 mm plate thickness contributes to stable seating in the toolholder, while the ISO 07 size offers a compact profile for confined setups. Together, these geometric attributes reduce vibration and support repeatable dimensional results on turned components. Secure clamping and straightforward integration into ISO systems The insert is supplied with hole and a cylindrical hole + one‑side countersink (40°–60°) which enables positive clamping and easy indexing in a wide range of external holders and boring bars. As an ISO‑specified plate, compatibility with the holder is determined by form, clearance angle, tolerance class, fixation method, size and thickness — a modular system approach that simplifies tool inventory and reduces downtime when replacing worn inserts. Choose AH725 where stability and versatility matter This universal, chip‑resistant grade is particularly suitable for smaller tools and applications demanding high process security rather than extreme metal removal rates. Paired with an appropriate chipbreaker chosen for the workpiece and machining stability, the insert supports consistent surface quality and reduced risk of edge breakouts. Selecting this grade helps to streamline production when component materials vary within a batch. Contact Metav Werkzeuge for tailored advice on the Tungaloy DCMT 070204 AH725 inserts and compatibility checks; technical enquiries are welcome via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6856777-Tungaloy Manufacturer article number: 6856777 SKU: TUN6856777 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core data Geometry: rhombic, ISO 07 Corner radius: 0.4 mm Plate thickness: 2.38 mm Clearance (frewinkel): 7° Cutting angle: 55° Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: one-sided Materials & features Material: carbide (Hartmetall) Coating: PVD (grade AH725) Application: Drehen (external and internal turning) Suitability: Stahl, rostfreier Stahl Indexable insert, ISO standard Compatibility requires matching holder form and tolerance FAQ What materials is this insert suitable for? The DCMT 070204 AH725 insert from Tungaloy is intended for a broad range of Stahl and rostfreier Stahl applications owing to its universal, chip‑resistant AH725 grade. How does the hole and countersink affect clamping? The cylindrical hole with a one‑side countersink (40°–60°) ensures secure seating and positive clamping in standard ISO toolholders, reducing the risk of insert movement during turning. Which chipbreaker should be chosen for finishing cuts? For finishing operations, select a chipbreaker with a gentler profile matched to the stability of the setup; the one‑sided chipbreaker on this insert supports controlled chip formation for improved surface quality. Is this insert compatible with all DCMT holders? Compatibility depends on holder design — form, clearance angle, tolerance class, fixation method, size and thickness must match the insert; verify holder specifications against the ISO DCMT070204 dimensions. Can the grade handle interrupted cuts or unstable setups? The AH725 PVD‑coated carbide is engineered for process security and improved edge stability, making it more tolerant of variable conditions than uncoated grades, though extreme interruptions still require suitable machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of process security, versatile PVD-coated carbide grade and ISO compatibility to maintain stable, repeatable turning operations; order directly via Metav Werkzeuge or consult our specialists for tool selection and availability. DCMT 070204 AH725 turning insert — Tungaloy A DCMT070204 AH725 turning insert for ISO-standard external and internal turning, offering a universal, breakage-resistant grade for steel and stainless steels. PVD-coated carbide grade AH725 ISO-standard rhombic 55° geometry One-sided chipbreaker with cylindrical hole 0.4 mm corner radius for precision finishing Process-stable cutting with a universal PVD-coated grade The AH725 grade is a PVD-coated carbide designed for broad steel and stainless steel machining where process security matters. With a universal composition and breakout-resistant microstructure, this insert reduces the risk of premature edge chipping in mixed-material production runs. The result is consistent tool life and fewer unscheduled tool changes, which supports predictable cycle times and reduces downstream rework. For small cutter assemblies or operations with frequently changing workpiece materials, the combination of coating and substrate yields a practical balance between wear resistance and toughness. ISO compatibility and straightforward holder selection The insert follows the ISO DCMT 070204 specification, so holder compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness. Matching the insert to a suitable external holder or boring bar and the correct shim/clamp arrangement ensures secure seating and repeatable positioning. This standardisation simplifies procurement and inventory management, as ISO-compliant holders and replacement screws fit reliably, reducing setup time and the risk of incorrect mounting that could affect dimensional accuracy. Geometry engineered for precision and surface quality The rhombic 55° geometry with a 0.4 mm corner radius and 7° clearance offers an efficient balance between cutting edge strength and access to confined features. The one-sided chipbreaker promotes predictable chip formation during turning, while the cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and accurate seat location. A plate thickness of 2.38 mm contributes to stability in light to medium-duty turning, delivering improved surface finishes and reduced vibration on shorter overhangs. Practical system considerations and benefits As part of an ISO insert system, the complete setup comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Selecting the correct chipbreaker and the AH725 grade according to workpiece material and machining stability reduces scrap rates and supports higher first-pass yields. The compact geometry and proven material combination make this insert especially suitable for job shops and production lines that require both flexibility and repeatable quality. For dependable turning performance with Tungaloy’s AH725 grade, contact Metav Werkzeuge for expert advice and available stock at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864888 Manufacturer SKU: TUN6864888 Label / SKU: 6864888-Tungaloy Core specifications Shape: rhombic, 55° Size: 07 ISO designation: 070204 Corner radius: 0.4 mm Clearance angle: 7° Thickness: 2.38 mm Hole: cylindrical hole + one-sided countersink (40°–60°) Features and materials Material: carbide Coating: PVD-coated Grade / sort: AH725 Chipbreaker: one-sided Typical application: turning System components: ISO insert, matching external holder/boring bar, shim/clamp, replacement screws FAQ What materials is this insert suitable for? The DCMT070204 AH725 Tungaloy turning insert is formulated for machining steel and stainless steels and performs well where material types vary during production. Which holders are compatible with this insert? Holders that accept ISO DCMT 070204 inserts—matched by form, relief angle, tolerance and clamping method—are compatible; ensure the external holder or boring bar matches the insert size and thickness. How does the AH725 grade affect tool life? The PVD-coated AH725 grade provides a balanced combination of wear resistance and toughness, improving process security and extending productive cutting life under mixed-material conditions. Can the insert be used for both external and internal turning? Yes, the insert’s rhombic 55° geometry and 0.4 mm corner radius make it suitable for both external and internal turning tasks where the chosen holder allows proper access. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH725 Wendeplatten - Tungaloy
Take advantage of the proven combination of PVD-coated carbide performance and universal material compatibility for reliable turning operations; the insert delivers consistent chip control and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT070204 AH725 DCMT Turning Insert for Turning — Tungaloy, PVD-coated carbide, 55° The DCMT070204 AH725 indexable insert is an ISO‑format rhombic turning insert engineered for robust external and internal turning of steel and stainless steel in variable production environments. PVD-coated carbide grade AH725 Universal for steel and stainless steel ISO rhombic insert DCMT 07 form 7° clearance and 0.4 mm corner radius Consistent cutting performance for mixed material runs The insert combines a PVD-coated carbide substrate with the AH725 grade to deliver stable cutting under varying conditions. This construction reduces the risk of edge chipping and promotes stable chip formation, which translates into fewer interruptions and higher process reliability. For shops processing mixed batches of steels and stainless steels, the balanced wear resistance and toughness of the grade mean more predictable tool life and reduced rework. The technical design supports productivity gains while keeping setup complexity low. Straightforward fitment and ISO compatibility reduce downtime Designed to the ISO geometry DCMT 07 format, the insert ensures reliable mounting when matched with the correct holder. Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness, so the choice of clamping system and holder should reflect these dimensions. The rhombic shape and the 55° geometry enable versatile application ranges, while the central hole with a cylindrical bore and single‑sided countersink ensures secure fastening and consistent seating in the pocket—helping to cut changeover time and maintain repeatable results. Process security and efficient chip control for predictable costs With a one‑sided chipbreaker and a corner radius of 0.4 mm, the insert supports controlled chip breaking for many turning operations, improving surface finish and reducing the likelihood of workpiece or machine interference. The AH725 grade is optimised for breakout resistance and is particularly useful where process security is a priority—for example in smaller tools or varied workpiece batches. Choosing this insert can lower lifecycle costs through fewer tool changes and more stable cutting conditions, offering an efficient return on production time invested. Contact Metav Werkzeuge for tailored advice and ordering of Tungaloy indexable inserts—our consultants provide technical guidance and swift delivery Technical data Article number: 6856707 Manufacturer article number: 6856707 Manufacturer SKU: TUN6856707 SKU: 6856707-Tungaloy Model series: ISO turning indexable inserts Facts Insert size: 07 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Geometry angle: 55° Included hole: yes Special features Material: carbide Coating / grade: AH725 (PVD-coated) Chipbreaker: one-sided Application: turning (external and internal) Hole style: cylindrical hole + single-sided countersink (40°–60°) Compatibility: ISO form; fit depends on form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The DCMT070204 AH725 insert is formulated for steel and stainless steel applications; the AH725 grade gives a balance of toughness and wear resistance suitable for mixed material production. Which holders are compatible with the insert? Compatibility is achieved with ISO rhombic holders for DCMT 07 geometry; matching the holder requires attention to form, clearance angle, tolerance class, fastening type, insert size and thickness. How does the AH725 grade support process security? AH725 is a PVD-coated carbide grade engineered for breakout resistance and consistent edge stability, promoting reliable chip control and longer intervals between tool changes. Is the insert suitable for smaller tools and high‑stability demands? Yes, the insert’s design and grade make it appropriate for smaller tooling and applications where high process security and repeatable results are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH725 Wendeplatten - Tungaloy
Combining the PVD-coated AH725 grade and the ISO DCMT070204 geometry delivers robust, versatile performance for turning steel and stainless steel; the insert’s 0.4 mm corner radius and single-sided chipbreaker support stable cutting and reliable chip control. Order the DCMT070204 AH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 070204 AH725 ISO turning insert for turning by Tungaloy A DCMT070204 AH725 indexable turning insert for ISO-standard applications, developed for external and internal turning where process security and material versatility are required. PVD-coated AH725 carbide grade for stable edge life ISO DCMT 070204 geometry for easy holder matching Suitable for steel and stainless steel machining 0.4 mm corner radius for strengthened cutting edge Consistent process security from a universal PVD grade The AH725 grade is a PVD-coated carbide designed for universal use on steel and stainless steel, combining wear resistance with reliable fracture control. For shops processing mixed batches or using smaller tooling, the material and coating reduce the risk of premature edge failure and deliver predictable tool life. Choosing a breakout-resistant grade such as this helps maintain cycle times and reduces unexpected interruptions, making it particularly suitable where repeatable results and process security are priorities. ISO geometry and precise dimensions simplify integration The ISO DCMT 070204 form and the specified dimensions — including a 7° clearance angle and 55° lead angle — allow straightforward selection of compatible holders and clamping sets. Compatibility depends on form, clearance, tolerance class, fastening and thickness; the standardised shape ensures interchangeability across ISO tooling systems. The 0.4 mm corner radius provides a compromise between edge strength and surface finish, supporting moderate feeds while limiting the risk of chipping during interrupted cuts. Practical chip control and system-level benefits A single-sided chipbreaker and the insert’s hole with a cylindrical bore and one-sided countersink (40°–60°) support secure clamping and effective chip formation in turning operations. The insert forms part of a system comprising an ISO insert, matching external holder or boring bar, shim/clamping kit and replacement screws; this system approach simplifies maintenance and tooling logistics. As a result, productivity improves through predictable tool changes and reduced scrap rates, while machining specialists gain flexibility to adapt insert choice to workpiece material and stability conditions. For reliable, productive turning with Tungaloy AH725 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: 6864869 Manufacturer SKU: TUN6864869 SKU: 6864869-Tungaloy Model series: ISO turning inserts Designation: DCMT070204 AH725 Facts Size: 07 Thickness: 2.38 mm Clearance angle: 7° Lead angle: 55° Corner radius: 0.4 mm Special features Material: Carbide Coating/grade: AH725 (PVD-coated carbide) Chipbreaker: single-sided Shape: rhomboid Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: Turning ISO form: DCMT 070204 FAQ Which materials is this insert suitable for? The DCMT070204 AH725 insert by Tungaloy is intended primarily for machining steel and stainless steel and performs well when workpieces vary between these materials. How does the ISO form affect holder compatibility? ISO DCMT geometry ensures compatibility with standard external holders and boring bars; correct matching requires checking form, clearance angle, tolerance class, fastening, size and thickness. What advantages does the 0.4 mm corner radius offer? A 0.4 mm radius increases edge strength and reduces chipping risk while still allowing reasonable surface finish and feed rates in general turning operations. When should the AH725 grade be chosen over other grades? Select the AH725 grade when a universal, breakout-resistant solution is needed for mixed-material batches or when high process security is demanded, particularly with smaller tools. How does the chipbreaker support machining? The single-sided chipbreaker aids predictable chip formation and evacuation during turning, helping to maintain stable cutting forces and reduce the likelihood of surface defects. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH8005 Wendeplatten - Tungaloy
Optimal wear resistance and consistent chip control support productive turning cycles; ISO compatibility ensures straightforward integration into existing tool systems. Order availability and fitment advice are provided by Metav Werkzeuge — contact the specialists for precise holder matching and delivery. DCMT 070204 AH8005 Tungaloy turning insert — ISO rhombic insert for turning The DCMT070204 AH8005 is an ISO-format indexable turning insert engineered for stable machining of heat-resistant alloys and hard materials in general turning applications. PVD-coated cemented carbide AH8005 ISO rhombic insert DCMT 070204 Single-sided chipbreaker with hole 0.4 mm corner radius and 7° relief High productivity through robust grade and coating The PVD-coated cemented carbide grade AH8005 offers enhanced wear resistance for operations on heat-resistant alloys and harder workpiece materials. By combining a hard, thermally stable coating with a substrate engineered for toughness, the insert prolongs cutting life and reduces frequency of index changes. This reliability translates into fewer interruptions on the shop floor and a more predictable tool budget for series production. Clear compatibility for fast system integration Designed to the ISO geometry series, the rhomboid insert matches common holder designs when checked for form, relief angle and size tolerances. The standardised designation means the insert fits into any correctly specified ISO holder, provided matching form, thickness and clamping are observed. This simplifies tool planning and minimises setup time when replacing inserts across different machines or fixtures. Geometry and clamping engineered for predictable chips The single-sided chipbreaker geometry combined with the rhomboid shape and central hole with a countersink yields consistent chip formation and secure clamping. The centrally countersunk hole (cylindrical hole with one-sided countersink 40°–60°) ensures the insert seats accurately on the clamp and reduces micro-movement under load, which helps maintain surface finish and repeatability in both external and internal turning. Practical system advice for efficient turning processes Select the chipbreaker and grade according to workpiece material and machining stability: AH8005 for heat-resistant alloys and hard materials, and a heavier clamp or rigid holder where cutting forces are high. The recommended system consists of the ISO insert, a matching external holder or boring bar, a support shim/clamp set and replacement screws; correct assembly prevents premature wear and supports consistent dimensional results in serial production. For stock information or advice on integrating Tungaloy AH8005 inserts into existing toolholders, contact Metav Werkzeuge for availability and application guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6775790 Manufacturer article number: 6775790 Manufacturer SKU: TUN6775790 SKU: 6775790-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Insert size: 07 Included angle: 55° Relief angle: 7° ISO code: 070204 Special features Grade/coating: AH8005, PVD-coated Shape: rhomboid Chipbreaker: single-sided Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Compatible system components: ISO insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The DCMT070204 AH8005 insert is specified for heat-resistant alloys and harder materials; the AH8005 PVD-coated grade emphasises wear resistance for such workpieces. How does the insert ensure secure clamping? The insert’s cylindrical hole with a one-sided countersink and standardised ISO geometry enable firm seating in compatible holders, reducing micro-movement during heavy cuts. Can this insert be used for internal boring as well as external turning? Yes; the insert’s rhomboid form, chipbreaker and secure clamping are suitable for both external and internal turning operations when matched with an appropriate boring bar or holder. What is the corner radius and relief angle of the insert? The insert features a 0.4 mm corner radius and a 7° relief angle, balancing edge strength and surface finish for general turning tasks. Which system parts are required to use the insert correctly? A complete system typically includes the ISO insert, a matching external holder or boring bar, a support shim/clamp set and replacement screws for secure, repeatable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH8015 Wendeplatten - Tungaloy
Benefit from a balance of PVD-coated carbide durability and precise ISO geometry for reliable turning of heat‑resistant alloys; efficient chip control and predictable tool life support continuous production. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT070204 AH8015 — ISO turning insert, 55° rhombic (Tungaloy) The DCMT070204 AH8015 is a rhombic ISO insert for external and internal turning, optimised for general machining of heat‑resistant alloys. ISO-compliant 55° rhombic geometry PVD-coated carbide AH8015 grade 0.4 mm corner radius for precision Single-sided chipbreaker with through-hole Higher productivity through balanced grade and coating The combination of the AH8015 grade and a PVD-coated carbide surface delivers a balanced mix of wear resistance and cutting-edge stability that benefits serial and jobbing environments. The coating reduces adhesion and improves thermal resistance during interrupted cuts, which in turn extends usable life and reduces tool-change frequency. For operations that prioritise throughput, this balance yields fewer unplanned stops and a more consistent machining rhythm. Reduced set-up time with standardised geometry Conformance to ISO dimensions and the 55° rhombic geometry ensures straightforward interchangeability with compatible holders. The standardised form, clearance angle and tolerance class simplify insert selection and reduce set‑up time while maintaining repeatable results. With a 0.4 mm corner radius and a 2.38 mm thickness, the insert provides predictable cutting forces and enables reliable component tolerances when used in appropriately rated toolholders. Controlled chip formation and dependable surface quality The single-sided chipbreaker and the specified hole with a cylindrical bore plus a one-sided countersink (40°–60°) support stable clamping and consistent chip control in turning applications. This configuration promotes a consistent surface finish and stable cutting behaviour when machining alloys that can produce long, stringy chips. In practice, the system—comprising the ISO insert, the correct external holder or boring bar, a backing shim/clamping set and replacement screws—ensures both security and repeatable performance. Clear application scope and system considerations Designed primarily for turning, the insert is a suitable first choice for general machining of heat‑resistant alloys where a compromise between edge life and toughness is required. Compatibility with a specific holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters avoids fitment issues and secures the expected performance. For further technical clarifications or recommendations on holders and feeds, the Metav Werkzeuge team provides application guidance. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts, stock checks and compatibility information via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6825788-Tungaloy Manufacturer article number: 6825788 Manufacturer SKU: TUN6825788 Model series: ISO turning inserts Facts Corner radius: 0.4 mm Thickness: 2.38 mm Insert size: 07 Clearance angle: 7° Main angle: 55° Special features PVD-coated carbide, grade AH8015 Rhombic 55° insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended for external and internal turning Compatible system: insert + outer holder/boring bar + shim/clamping set + replacement screws FAQ What materials is this insert best suited for? The DCMT070204 AH8015 insert is designed as a first choice for general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for these materials. How does the insert ensure consistent clamping and alignment? The insert’s hole design (cylindrical with a one‑sided countersink) and ISO form allow secure seating in matching toolholders, ensuring repeatable clamping and alignment with the holder system. Can the insert be used for both external and internal turning? Yes, the specially shaped 55° rhombic geometry and single-sided chipbreaker make the insert suitable for both external and internal turning operations when paired with the correct holder. Which parameters determine holder compatibility? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters with the holder delivers the expected performance and fitment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH8015 Wendeplatten - Tungaloy
Combining PVD-coated carbide AH8015 for durable edge life with a 0.4 mm corner radius and precise clamping geometry, this ISO rhombic insert ensures consistent chip control and stable performance when turning heat-resistant alloys. Order the DCMT070204 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 070204 AH8015 ISO turning insert — PVD-coated carbide by Tungaloy DCMT070204 AH8015 is an ISO rhombic turning insert designed for external and internal turning where a balance of wear resistance and cutting-edge stability is required. ISO rhombic insert DCMT 07 size PVD-coated carbide AH8015 grade Single-sided chipbreaker for reliable chips Cylindrical hole with 40°–60° countersink Consistent cutting performance for heat-resistant alloys The PVD-coated carbide grade AH8015 is formulated as a first choice for general machining of heat-resistant alloys, offering an optimum balance between wear resistance and cutting-edge stability. As an ISO-spec insert, it is engineered to deliver repeatable results in both roughing and light finishing passes. The wear characteristics of the coating reduce flank wear development, which translates into fewer insert changes and more stable cycle times on production runs when machining demanding materials. Secure clamping and defined geometry for repeatability A stable toolholder interface is central to process reliability: the rhombic shape with a 55° lead angle, 0.4 mm corner radius, and 7° rake creates a defined cutting geometry that supports predictable chip formation and surface quality. The insert’s cylindrical hole with one-sided countersink (40°–60°) enables secure mechanical clamping and simple replacement on standard ISO holders. With a plate thickness of 2.38 mm and standard 07 size, the component sits reliably in the clamping pocket, reducing micro-movement and improving tolerance adherence across repeated indexings. Improved chip control and productivity The integrated single-sided chipbreaker provides controlled chip segmentation for a wide range of turning conditions, reducing entanglement and enabling safer, higher-feed operations where chip evacuation is critical. By promoting consistent chip shapes, the insert helps to protect the workpiece finish and to maintain stable cutting forces, supporting higher throughputs and reduced downtime. These productivity gains stem from a rational combination of cutting geometry and the balanced properties of the PVD-coated hardmetal grade. Practical integration and selection guidance This indexable insert is part of an ISO-compliant system that requires a matching holder, correct clearance, and the appropriate clamping set and screws for reliable operation. Selection of the right chipbreaker and grade should be based on workpiece material, depth of cut and machine-tool rigidity. For customers seeking to optimise cycle times or to integrate the insert into existing tool assemblies, the technical team can advise on holder compatibility, tolerance classes and the most suitable cutter geometry for the application. For tailored application advice, delivery options or to arrange a supply of Tungaloy turning inserts, contact Metav Werkzeuge for fast technical guidance and local availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6825760 Manufacturer SKU: TUN6825760 Our SKU: 6825760-Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Lead angle: 55° Rake (free) angle: 7° Size: 07 Special features PVD-coated carbide Grade AH8015 Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: turning (external and internal) Compatibility: ISO-standard holder interfaces FAQ What materials is this insert best suited for? The DCMT070204 AH8015 insert is optimised for machining heat-resistant alloys, where its PVD-coated carbide offers a balanced combination of wear resistance and edge strength. How is the insert secured in the holder? Clamping is achieved via the cylindrical hole with one-sided countersink (40°–60°); this geometry provides a firm seat for standard ISO mechanical clamping systems and consistent positioning. What are the key geometric specifications to consider? Important dimensions include a 0.4 mm corner radius, 7° free rake angle, 55° lead angle and a plate thickness of 2.38 mm, which together define the cutting behaviour and suitability for specific turning tasks. Which chip control does the insert provide? The built-in single-sided chipbreaker ensures controlled chip segmentation and reliable evacuation across a range of cutting conditions, improving process safety and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, precise ISO conformity, and stable chip control to maintain consistent turning performance. Order the insert via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DCMT070204 AH8015 Turning insert (ISO) for Dreh / Turning – Tungaloy DCMT070204 AH8015 is an ISO-format turning insert designed for external and internal turning, optimised for machining heat-resistant alloys with balanced wear resistance and edge stability PVD-coated carbide AH8015 for heat-resistant alloys ISO rhombic insert size 07 with 55° cutting angle Single-sided chipbreaker for consistent chip control 0.4 mm corner radius; 2.38 mm plate thickness High-temperature alloy machining with balanced tool life The PVD-coated carbide AH8015 grade offers a balanced combination of wear resistance and edge stability, making it suitable for the general machining of heat-resistant alloys. The coating reduces flank wear under elevated temperatures, which extends effective tool life and supports longer uninterrupted cycles. This balance yields predictable component tolerances and reduces the need for frequent insert changes, contributing to improved process economy. Stable chip control for safer, repeatable processes A single-sided chipbreaker design ensures consistent chip formation and evacuation during turning operations. Controlled chips reduce the risk of entanglement and improve surface finish, particularly in interrupted cuts or unstable setups. The targeted chip control also helps to maintain steady cutting forces, which benefits both tool life and machine spindle load, resulting in a more reliable production rhythm. Straightforward integration into ISO tool systems As an ISO-standard indexable insert, compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness. The rhombic geometry and the specified mounting hole with cylindrical bore plus a single-sided countersink (40°–60°) allow straightforward clamping in many common external and internal turning holders. Verifying holder seat and fastening components ensures optimal seating and repeatable positioning for accurate manufacturing results. Compact geometry with practical cutting characteristics The insert features a 0.4 mm corner radius and a 2.38 mm plate thickness, paired with a 55° cutting angle and a size designation of 07, creating a compact geometry suited to fine finishing and general turning tasks. These dimensions support good edge strength while permitting access in tighter features. The carbide substrate provides robust support to the PVD coating, maintaining edge integrity under typical turning feeds and speeds. For detailed selection guidance on Tungaloy turning inserts and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice Technical Data Article number: 6775791 Manufacturer SKU: TUN6775791 SKU: 6775791-Tungaloy Name: DCMT070204 AH8015 Tungaloy turning insert Model series: ISO-Drehwendeschneidplatten Material: carbide Technical Specs Corner radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 7° Cutting angle: 55° Plate size: 07 Features & Compatibility Coating: AH8015 (PVD) Substrate: PVD-coated carbide Chipbreaker: single-sided Plate shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) ISO designation: DCMT070204 Typical application: external and internal turning Compatibility depends on form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The DCMT070204 AH8015 insert is optimised for machining heat-resistant alloys; the AH8015 PVD-coated carbide substrate provides balanced wear resistance and edge stability for such materials. How does the chipbreaker affect production? The single-sided chipbreaker on this indexable insert promotes consistent chip formation and evacuation, supporting stable cutting forces and improved surface finish in turning operations. Which holders are compatible with this ISO insert? Compatibility requires a holder that matches the rhombic form, 7° relief angle, size 07 seating, 2.38 mm thickness and the specified hole/countersink arrangement; check seat geometry and fastening method for proper fit. What are the key dimensions to verify when replacing inserts? Confirm the 0.4 mm corner radius, 2.38 mm thickness, size 07, relief angle 7° and the ISO designation DCMT070204 to ensure correct replacement and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet AT9530 for improved surface finish, the DCMT070204 ISO geometry for reliable indexability and a 0.4 mm corner radius for consistent part quality; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DCMT 070204 AT9530 — Tungaloy rhombic turning insert for finishing, coated cermet DCMT070204 AT9530 is an ISO rhombic turning insert designed for finishing and light turning of Stahl, offering a coated cermet grade optimised for surface quality and even wear Coated cermet grade AT9530 Optimised for finishing and light turning Rhombic 07 profile with 7° clearance Cylindrical hole with single-side countersink Consistent surface quality with coated cermet performance The insert delivers stable surface finish thanks to the coated cermet AT9530 composition, which combines thermal resistance and a fine-grained cutting edge for low built-up edge tendency. For finishing passes, the 0.4 mm corner radius supports reduced vibration and improved finish without sacrificing edge stability. The material selection and coating promote uniform flank wear, helping to maintain dimensional control over longer tool life than conventional grades. This makes the insert well suited where high-quality external and internal surfaces are required on components made from Stahl. Reliable compatibility with ISO tool systems Designed to the ISO profile DCMT070204, the indexable plate is compatible with standard rhombic holders when matched for form, clearance, tolerance class, clamping method, size and thickness. The 2.38 mm plate thickness and the 07 size allow predictable clamping behaviour; the insert’s cylindrical hole with a 40°–60° single-side countersink provides secure fastening and repeatable seating. Selecting the correct holder geometry and tightening torque ensures the expected cutting conditions and helps avoid premature edge damage, enabling a smooth integration into established turning cells and manual setups alike. Practical chip control and application notes This insert features a single-sided chipbreaker adapted for light to finishing cuts, promoting defined chip formation and evacuation at moderate cutting depths and feeds. The moderate clearance of 7° reduces rubbing on the flank while preserving cutting edge strength for finishing passes. For best results, pair the insert with a rigid toolholder, moderate cutting speeds appropriate for cermet grades and stable workholding; coolant strategies can be adjusted depending on the part geometry to support surface integrity and tool life. Installation, handling and tool management Indexing and replacement are straightforward: the geometry permits quick rotation to fresh corners, reducing downtime and improving process uptime. Because the insert is ISO-standardised, spare parts management is simplified and downtimes are reduced by stocking a standardised plate type. Careful monitoring of wear patterns—particularly flank wear—helps to decide when to index or replace the insert, maintaining part quality and process reliability. For application-specific recommendations on the Tungaloy DCMT070204 AT9530 insert and availability, contact Metav Werkzeuge for tailored advice and rapid supply coordination Technical data Article number: 6773738-Tungaloy Manufacturer SKU: TUN6773738 Manufacturer article number: 6773738 Model series: ISO-Drehwendeschneidplatten Name: DCMT070204 AT9530 Tungaloy-Wendeplatte Core specifications Plate size: 07 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 55° Features / Materials Material: Hartmetall Cutting material type: coated cermet (AT9530) Plate form: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: single-sided Intended application: Drehen FAQ What is the primary application for this insert? The insert is intended for finishing and light turning operations on Stahl; the AT9530 grade focuses on surface quality and even wear. Can the insert be used in standard ISO holders? Yes, the DCMT070204 geometry is ISO-standard and compatible with matching rhombic toolholders when form, clearance and clamping are aligned. What benefit does the AT9530 coating provide? The AT9530 coated cermet enhances edge life and promotes uniform wear, which supports consistent surface finish during finishing cuts. How many cutting edges are available per insert and how is indexing managed? The insert follows ISO indexing practice for rhombic plates; corners can be rotated to fresh edges to reduce tool change frequency. Which parameters are recommended for best surface finish with this insert? Stable clamping, a rigid holder and moderate cutting speeds suited to cermet grades, combined with the 0.4 mm corner radius and single-sided chipbreaker, yield optimal surface results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 DX120 Wendeplatten - Tungaloy
The combination of the DX120 PCD grade and a precise 55° rhombic geometry delivers high cutting speeds and extended tool life for aluminium and non-ferrous machining; order the DCMT070204 DX120 insert directly via Metav Werkzeuge or contact the consultants for compatibility advice. DCMT070204 DX120 ISO turning insert (PCD) — rhombic 55°, Tungaloy A DCMT070204 DX120 indexable turning insert engineered for high-speed turning of aluminium, non-ferrous metals and abrasive non-metals, offering long tool life and consistent chip control. PCD grade DX120 for high cutting speeds Rhombic 55° geometry for versatile turning Single-sided chipbreaker for stable chip control ISO-compatible insert with hole and countersink Faster aluminium machining through PCD technology The DX120 grade is a polycrystalline diamond (PCD) cutting material bonded on a carbide substrate, designed specifically for non-ferrous and abrasive non-metals. This structure permits significantly higher cutting speeds and markedly longer tool life compared with conventional carbide inserts when turning aluminium alloys. PCD provides an extremely hard, wear-resistant cutting edge that reduces flank wear and preserves geometry over longer production runs, which translates into fewer interruptions for tool changes and more predictable cycle times. Reliable chip control and consistent surface finish A combination of the single-sided chipbreaker and the 55° rhombic shape ensures controlled chip formation and evacuation in a wide range of turning operations. The controlled chip flow lowers the risk of built-up edge and improves surface quality on delicate materials, delivering repeatable results shift after shift. The modest corner radius (0.4 mm) helps achieve a balance between strength and fine surface finish, making the insert suitable for finishing and semi-finishing passes in stable set-ups. Clear selection and holder compatibility to reduce downtime The insert conforms to ISO dimensions and features a cylindrical hole with a one-sided countersink (40°–60°), ensuring mechanical compatibility with standard ISO turning holders and clamping sets. Because fit depends on form, clearance angle, tolerance class, fastening method, nominal size and thickness, selecting the correct holder-clamp combination is crucial; matching these parameters avoids seating errors and vibration, which otherwise compromise tool life and component quality. The simple system composition—insert, appropriate external holder or boring bar, shim/clamp set and replacement screws—facilitates rapid assembly and straightforward inventory planning. For application advice, holder compatibility checks or to order the Tungaloy DCMT070204 DX120 insert through Metav Werkzeuge, please contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and delivery options. Technical Data Article number: 6822158 Manufacturer SKU: TUN6822158 SKU: 6822158-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: DCMT070204 DX120 Tungaloy-Wendeplatte Facts Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Main cutting edge angle: 55° Size: 07 Hole style: cylindrical hole + one-side countersink (40°–60°) Special features Cutting material: polycrystalline diamond (PCD) Grade: DX120 Substrate: carbide Plate form: rhombic Chipbreaker: one-sided Application: turning (external and internal) Suitable for: aluminium, non-ferrous metals, abrasive non-metals ISO-compliant dimensions and tolerances System components: insert, holder or boring bar, shim/clamp set, screws FAQ What materials are best suited for this insert? The DCMT070204 DX120 turning insert is optimised for aluminium, non-ferrous metals and abrasive non-metals; the PCD cutting material and carbide substrate provide excellent wear resistance for these workpiece types. How does the DX120 grade differ from conventional carbide grades? DX120 is a polycrystalline diamond grade, offering much higher hardness and abrasion resistance than typical carbide grades, which results in higher cutting speeds and extended service life for the insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and includes a cylindrical hole with a one-side countersink; mechanical compatibility depends on matching form, relief angle, tolerance class, fastening and thickness to the chosen holder. What is the purpose of the single-sided chipbreaker? The one-sided chipbreaker on this rhombic insert promotes reliable chip control and predictable chip segmentation, which aids surface finish and reduces the risk of built-up edge during high-speed turning. Which SKU should be ordered for this item? Order using the manufacturer article number 6822158 or manufacturer SKU TUN6822158 to ensure the correct DCMT070204 DX120 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance, a rhombic 07 form and precise 7° clearance for stable turning results; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DCMT070204 GH730 indexable insert for turning — rhombic 07, 7° clearance (Tungaloy) A DCMT070204 GH730 indexable insert designed for ISO-compliant external and internal turning, offering a balance of wear resistance and edge stability for a wide range of turning operations. ISO rhombic insert size 07 GH730 carbide grade for wear resistance 7° clearance for stable cutting Cylindrical hole with 40°–60° countersink Consistent cutting performance that boosts productivity The combination of the GH730 cutting grade with the carbide substrate provides a predictable, long-lasting cutting edge suitable for productive turning. The rhombic 07 geometry ensures accessible cutting corners for both external and internal operations, while the 7° clearance reduces rubbing and promotes effective chip evacuation. This results in steadier feeds and reduced downtime due to fewer insert changes, supporting higher throughput on repetitive turning cycles. Improved edge life and wear control for machining stability The grade's formulation emphasises controlled wear and edge resilience, which is particularly beneficial when facing mixed batch compositions or varying feed rates. The integrated single-sided chipbreaker helps form consistent chips and reduces thermal load on the cutting edge, extending service intervals. Users will notice a more constant surface finish and predictable tool life, minimising process variation and the need for frequent parameter adjustments. Secure mounting and versatile compatibility with ISO holders Designed according to ISO specifications, the insert features a cylindrical hole with a one-sided countersink (40°–60°), enabling reliable clamping in standard external holders and boring bars. With a 2.38 mm thickness and 0.4 mm corner radius, the component fits common ISO tool systems and allows selection of the right seat, clamp and screw combination for optimal stability. Compatibility depends on form, tolerance class, size and thickness, so select the corresponding holder geometry for a secure fit and repeatable performance. Choose the GH730 grade for balanced wear resistance and edge stability and contact Metav Werkzeuge to discuss the DCMT070204 insert and suitable holders — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6820980 Manufacturer SKU: TUN6820980 Our SKU: 6820980-Tungaloy Designation: DCMT070204 Grade: GH730 Material: Carbide Model series: ISO turning indexable inserts Shape: Rhombic Size: 07 Thickness: 2.38 mm Hole: Cylindrical hole with one-sided countersink (40°–60°) Facts Corner radius: 0.4 mm Clearance angle: 7° Wedge/relief angle: 55° Intended application: Turning Chipbreaker: Single-sided Special features Tungaloy cutting grade GH730 Carbide substrate for wear resistance Compatible with ISO holders and boring bars Suitable for external and internal turning operations System: insert + holder + clamp set + replacement screws FAQ Is this insert compatible with standard ISO turning holders? Compatibility is governed by insert form, size, thickness, tolerance class and fixing; the DCMT070204 GH730 insert is manufactured to ISO dimensions and is suitable for standard ISO external holders and boring bars when matched with the correct clamp and screw. Which materials can be machined with this grade? The GH730 grade offers balanced wear resistance and toughness, making the insert well suited to general turning tasks across a broad range of steels and alloyed materials; selection of chipbreaker and machining parameters should be adjusted according to the workpiece material. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the pocket and enables consistent clamping torque and repeatable positioning, which improves stability and reduces the risk of insert movement under load. How does the 0.4 mm corner radius affect finishes and strength? A 0.4 mm radius provides a compromise between edge strength and achievable surface finish: small radii improve detail and reduce cutting forces while still offering adequate resistance to chipping in most turning applications. Can the insert be used for both internal and external turning? Yes; the rhombic 07 geometry and ISO compliance make the insert adaptable for both internal and external turning operations when fitted into an appropriate holder and with parameters selected for the specific operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant GH730 grade, precise 0.4 mm corner radius, and ISO compatibility to secure consistent machining and predictable tool life; order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT070204 GH730 – Tungaloy turning insert (ISO rhombic 07, 0.4 mm radius, 7° clearance) The DCMT070204 GH730 is an ISO rhombic indexable insert engineered for external and internal turning, offering a balance of wear resistance and edge stability for general to finishing turning applications Wear-resistant GH730 grade 0.4 mm corner radius for fine finishes 7° clearance for secure cutting Cylindrical hole with single-sided countersink Consistent machining and extended tool life The GH730 carbide grade is formulated to combine wear resistance with sufficient toughness, reducing edge breakdown during interrupted cuts and longer production runs. By choosing an insert matched to the operation, the machining process becomes more predictable and cycle times remain stable. The ISO-designation ensures straightforward interchangeability within standard toolholder systems, making inventory management simpler and reducing downtime caused by tool changeovers. Secure clamping and accurate cutting geometry The rhombic 07 form and 0.4 mm corner radius enable finer surface finishes while maintaining edge strength for light to medium cuts. A 7° clearance angle supports reliable chip evacuation and lowers rubbing on the flank face, contributing to consistent dimensional results. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive, repeatable clamping in compatible holders; the 2.38 mm plate thickness provides rigidity to resist chatter in typical turning setups. Practical selection advice for process reliability Select the appropriate chipbreaker and grade based on the workpiece material and machining stability: a single-sided chipbreaker suits many standard turning tasks, while the carbide composition provides a compromise between wear life and toughness. For applications where surface finish and edge consistency are crucial, the small corner radius and GH730 behaviour help deliver the necessary results. If further details are required, Metav Werkzeuge can assist with geometry matching and holder compatibility based on machining conditions and desired outcomes. Contact Metav Werkzeuge for tailored application advice and to obtain Tungaloy DCMT070204 GH730 inserts with SKU TUN6820981 for precise turning tasks Technical data Article number: 6820981 Manufacturer SKU: TUN6820981 Model series: ISO turning indexable inserts Material: carbide Grade: GH730 Facts Corner radius: 0.4 mm Clearance angle: 7° Plate thickness: 2.38 mm Size: 07 Insert form angle: 55° Design and features Rhombic insert form (07) Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard cutting insert Intended application: turning (external and internal) FAQ What machining operations is this insert intended for? The DCMT070204 GH730 insert from Tungaloy is intended for external and internal turning operations and is suitable for general and finishing turning tasks. Which materials is the GH730 grade best suited to? The GH730 grade is a Tungaloy carbide composition designed to offer a balance of wear resistance and toughness for a broad range of workpiece materials; selection of the chipbreaker and grade should match the specific material and cutting conditions. How does the insert ensure secure clamping in the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) that enables repeatable, positive clamping in compatible ISO rhombic holders, contributing to stable cutting performance. What are the key dimensions to consider when selecting a holder? Key dimensions include the 0.4 mm corner radius, plate thickness 2.38 mm, size 07, clearance angle 7° and the ISO designation 070204, which together determine holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 GT9530 Wendeplatten - Tungaloy
Benefit from the GT9530 coated cermet for improved surface finish and extended tool life, combined with ISO‑compliant geometry for reliable holder compatibility. The result is consistent turning performance and reduced rework — order or request tailored advice via Metav Werkzeuge when required. DCMT 070204 GT9530 ISO turning insert, 55° geometry — Tungaloy The DCMT070204 GT9530 is an ISO‑standard rhombic turning insert optimised for finishing and light general‑purpose turning of steel. GT9530 cermet for superior finish ISO‑standard rhombic insert form Single‑sided chipbreaker for consistent chips 0.4 mm corner radius for fine finishing Consistent surface finish and prolonged tool life The GT9530 cermet grade is a coated, wear‑resistant solution developed for finishing to light universal turning of steel where surface quality and tool life matter. By combining a hard, abrasion‑resistant coating with a carbide substrate, the insert reduces flank wear and maintains cutting edge geometry over longer cycles. This leads to fewer interruptions for insert changes and a more predictable production flow, delivering parts with improved dimensional consistency and a reduced need for downstream polishing. Predictable set‑up and secure clamping with ISO conformity ISO‑standard geometry ensures that form, 7° clearance, tolerance class, 55° approach angle and the plate 2.38 mm thickness match common holders and tool posts. The standardisation simplifies tooling decisions and contributes to repeatable process results: when clamping and seating conditions are consistent, cutting forces and heat generation remain within expected ranges, which stabilises tool life and workpiece quality. Compatibility with established toolholders shortens set‑up times and supports efficient shopfloor planning. Practical choice for turning applications in steel The rhombic insert shape (size 07) with a 0.4 mm corner radius offers a balance between surface finish and edge strength for final passes. The single‑sided chipbreaker is tuned for chip control in stable turning operations, while the cylindrical hole with a one‑sided countersink (40°–60°) ensures secure fastening and repeatable seating in a range of ISO holders. For those specifying tooling, the DCMT070204 GT9530 provides a reliable baseline grade and geometry for finishing and light general‑purpose work; consult for alternative chipbreakers or radii if process stability or material grade varies. Contact Metav Werkzeuge for application advice and procurement of Tungaloy turning inserts; our consultants provide application‑specific recommendations and can confirm availability of DCMT070204 GT9530 for immediate use Technical data Article number: 6998335 Manufacturer SKU: TUN6998335 SKU: 6998335-Tungaloy Model series: ISO turning inserts Key dimensions Insert size: 07 Thickness: 2.38 mm Included angle: 55° Clearance angle: 7° Corner radius: 0.4 mm Materials & features Coating/grade: GT9530 (coated cermet) Substrate: cemented carbide Chipbreaker: single-sided Hole type: cylindrical hole + one-sided countersink (40°–60°) Shape: rhombic Application: Turning FAQ Which materials are suitable for this insert? The DCMT070204 GT9530 is intended primarily for machining steel; the GT9530 cermet grade offers wear resistance and a surface finish well suited to finishing and light general‑purpose turning in stable conditions. For which turning operations is this grade recommended? This grade is tailored to finishing and light universal turning. The combination of a 0.4 mm corner radius and the single‑sided chipbreaker helps to achieve fine surface quality on final passes. How does ISO compatibility simplify tooling selection? ISO conformity of the insert geometry means form, thickness (2.38 mm), hole style and tolerance class match common holders, resulting in predictable clamping and repeatable cutting performance when the correct holder form and clearance are used. What fastening and seating features does the insert have? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to ensure secure fastening and accurate seating in compatible ISO holders, which supports consistent cutting forces and lower vibration. Can this insert be used with different chipbreakers or corner radii? The DCMT070204 GT9530 is supplied with a single‑sided chipbreaker and a 0.4 mm radius as standard; for alternative chipbreaker styles or radii, application review is recommended to match material, stability and desired surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 GT9530 Wendeplatten - Tungaloy
The product data contains conflicting information: the material is indicated as "carbide" while the cutting material type is described as "coated cermet". This discrepancy could lead to confusion among users or customers relying on the data for decision-making purposes. Please verify and correct the source data to ensure consistency and accuracy in the product description, as this will help maintain trust and reliability in the information provided. Accurate and consistent product data is essential for clear communication, effective marketing, and customer satisfaction. Addressing this issue promptly will prevent potential misunderstandings and improve the overall quality of the product information.
DCMT 070204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of longer tool life and consistent surface quality provided by the GT9530 coated cermet grade; the precise geometry and ISO conformity ensure straightforward integration into standard holders. Order the DCMT070204 GT9530 Tungaloy insert directly via Metav Werkzeuge or consult our technical team for application matching. DCMT070204 GT9530 Tungaloy — ISO turning insert for turning A DCMT070204 GT9530 Tungaloy ISO turning insert designed for finishing and light universal turning, offering a coated cermet grade for improved wear resistance and superior surface finish. Coated cermet grade GT9530 0.4 mm nose radius for fine finishes 7° relief and rhombic 07 form Consistent finishes and extended component life The combination of a coated cermet cutting edge and a 0.4 mm nose radius delivers reliable surface quality in finishing operations. The GT9530 grade is formulated for wear resistance under stable machining conditions, which reduces the frequency of index changes and contributes to longer uninterrupted production runs. For shops prioritising consistent part appearance, the insert’s geometry minimises vibration sensitivity and supports predictable, repeatable results. Easy integration into ISO-compatible tool systems Manufactured to ISO specifications, the insert’s rhombic 07 form and cylindrical hole with single-side countersink (40°–60°) guarantee compatibility with commonly used external holders and boring bars. The 7° relief angle simplifies clamping and alignment while maintaining the intended cutting angle; this helps to avoid unexpected interference and supports rapid tool changes. Clear ISO conformity reduces inspection effort and streamlines tool inventory management. Practical advantages for stable turning operations Designed for turning (Drehen), the insert’s single-sided chipbreaker combined with the GT9530 coating improves chip control in stable set-ups, which in turn reduces downtime caused by poor chip evacuation. The grade’s properties make it particularly effective for steel machining where finish and tool life are key criteria. Selecting this insert can lower per-part tool costs through fewer index cycles and more consistent machining windows. Choosing the right insert and complementary tooling When pairing an insert of this type, consider holder compatibility in terms of form, relief, tolerance class, mounting method, size and thickness to ensure correct seating and clamping. The system typically comprises the ISO insert, a matching external holder or boring bar, a support pad/clamping set and replacement screws. For operations that require improved repeatability and process stability, the GT9530 option is a balanced choice between surface finish demands and economical tool usage. Contact Metav Werkzeuge today to discuss the suitability of the Tungaloy GT9530 inserts for specific turning applications or to request tailored advice — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Manufacturer item number: 6998323 SKU: 6998323-Tungaloy Manufacturer SKU: TUN6998323 Brand: Tungaloy Model series: ISO turning inserts Nose radius: 0.4 mm Relief angle: 7° Approach/lead angle: 55° Insert size: 07 Thickness: 2.38 mm Grade/coating: GT9530 (coated cermet) Material: cemented carbide Insert shape: rhombic (07) Chipbreaker: single-sided Mounting: with hole — cylindrical hole + single-side countersink (40°–60°) Typical application: turning FAQ What machining tasks is this insert best suited to? The DCMT070204 GT9530 Tungaloy insert is intended for finishing and light universal turning, providing a balance of surface quality and tool life in stable machining conditions. Is the insert compatible with standard ISO holders? Yes, the insert is ISO-conforming; compatibility is determined by holder form, free angle, tolerance class, mounting type, size and thickness. Which materials can be machined with this grade? The GT9530 coated cermet grade is primarily aimed at steel machining where wear resistance and good surface finish are required. How does the 0.4 mm nose radius affect the finish? A 0.4 mm nose radius supports fine surface finishes by smoothing tool marks while maintaining sufficient edge strength for light turning operations. What is the mounting style of the insert? This insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) for secure clamping in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 GT9530 Wendeplatten - Tungaloy
Take advantage of the blend of coated cermet performance and ISO conformity for reliable finishing and extended tool life; order genuine Tungaloy inserts through Metav Werkzeuge or consult our specialists for application-specific advice. DCMT 070204 GT9530 indexable turning insert for finishing — Tungaloy The DCMT070204 GT9530 is an ISO-standard rhombic indexable insert designed for turning operations, optimised for finishing to light general-purpose machining of steel under stable conditions. Coated cermet grade GT9530 Rhombic ISO insert, size 07 0.4 mm corner radius for fine finish Single-side chipbreaker, with hole Predictable surface quality and longer tool life The combination of a coated cermet substrate and the GT9530 grade delivers a balance between wear resistance and surface finishing. Cermet is a ceramic–metal composite that offers enhanced thermal stability and reduced built-up edge compared with many carbides; this results in more consistent surface finish and prolonged intervals between index changes when used in stable turning setups. The modest 0.4 mm corner radius supports fine edge definition for light finishing passes, reducing the need for secondary operations. Efficiency gains for steel turning in stable conditions This insert is specified for turning with a focus on finishing or light universal cutting of steel. The single-side chipbreaker controls chip flow in predictable cutting regimes, helping to maintain process stability and reduce downtime. In practice, choosing this grade and geometry can lower cycle variability and improve part-to-part consistency, which benefits batch production and precision components where repeatable surface quality and tool life are critical. Clear guidance on holder compatibility and mounting Compatibility with toolholders depends on form, relief angle, tolerance class, fastening, size and thickness. The insert features a rhombic shape with a central hole and a cylindrical hole plus a one-sided countersink (40°–60°), so select holders rated for ISO rhombic inserts of size 07 and a plate thickness of 2.38 mm. The 7° relief angle and the ISO geometry ensure straightforward clamping and repeatable seating, simplifying tool changeover and minimising setup errors. Practical selection and operating window When opting for this grade, specify stable cutting parameters that favour finishing rather than heavy interrupted cuts. The coated cermet composition is best applied where a good surface and extended life are desired under steady feeds and speeds; aggressive interrupted cuts or heavy roughing may require a tougher carbide grade. The insert’s ISO designation and the documented geometry make it straightforward to match with appropriate Tungaloy holders and clamping sets, enabling efficient integration into existing turning systems. Contact Metav Werkzeuge for availability, application advice and to request the matching holder recommendations for this Tungaloy insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998327 Manufacturer SKU: TUN6998327 Model series: ISO-Drehwendeschneidplatten Grade: GT9530 (coated cermet) Material: cemented carbide base with cermet coating Facts ISO designation: DCMT070204 Size: 07 Corner radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 7° Approach angle: 55° Hole: with hole (cylindrical hole + one-sided countersink 40°–60°) Special features Rhombic plate form Single-side chipbreaker ISO-standard indexable turning insert For finishing to light universal turning in steel Compatibility determined by form, relief, tolerance, fastening, size and thickness Brand: Tungaloy FAQ Is this insert suitable for finishing stainless or alloy steels? The DCMT070204 GT9530 insert is optimised for steel finishing; for specific stainless or alloy applications, match the GT9530 wear characteristics to the material and cutting conditions to ensure optimal performance. What clamping elements are required for correct seating? Use an ISO-compatible holder for rhombic inserts of size 07 with clamping hardware that fits a 2.38 mm plate thickness and the central hole/countersink geometry; proper seating ensures the insert’s repeatability. How does the GT9530 coating affect tool life? The GT9530 coated cermet improves wear resistance and surface quality under stable cutting parameters, extending effective life in finishing operations compared with uncoated grades. Can this insert be used for light roughing as well as finishing? The insert is designed primarily for finishing to light general-purpose turning; light roughing may be possible but heavier interrupted or high-feed roughing is not recommended for best life. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; this small radius supports finer surface finishes and reduces cutting forces in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of coated cermet durability and precise geometry to achieve stable finishing and extended tool life in ISO turning applications; order the DCMT070204 GT9530 insert directly via Metav Werkzeuge or consult the technical specialists if assistance is required. DCMT070204 GT9530 DCMT insert for Turning — Tungaloy, coated cermet, 0.4 mm radius DCMT070204 GT9530 is an ISO rhombic indexable insert designed for turning operations, optimised for finishing and light universal cuts in steel under stable machining conditions ISO rhombic insert DCMT070204 Coated cermet GT9530 for longer life 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Maximise productivity with durable, finish-oriented cutting performance The DCMT070204 GT9530 insert pairs a coated cermet grade with an ISO-compliant geometry to deliver consistently improved surface finish and longer tool life in stable turning setups. The GT9530 grade is formulated for wear resistance during finishing and light universal turning of steel, making it a cost-effective choice where component quality and predictable tool change intervals matter. The single-sided chipbreaker supports controlled chip formation, reducing heat concentration at the cutting edge and contributing to quieter, more efficient machining cycles. Predictable tolerances through defined geometry and chip control A rhombic shape combined with a 0.4 mm corner radius and 7° clearance angle produces a stable cutting engagement that helps protect part tolerances and edge integrity during finishing passes. The insert’s 55° included angle and 2.38 mm thickness create a stiff cutting corner that resists vibration when matched with a properly rated holder. The combination of geometry and chip control reduces the risk of built-up edge, which in turn supports consistent dimensional accuracy and repeatable surface quality across a production run. Easy integration in ISO turning tool systems for faster set-up As an ISO-compliant indexable insert, the unit integrates with existing holders and bores when matching form, clearance, tolerance class, fastening method, size and thickness. The central cylindrical hole with one-sided countersink (40°–60°) simplifies secure clamping and replacement using standard screws and shims, minimising downtime during tool changes. The standardised format enables modular system assembly—insert, external holder or boring bar, shim and clamp—so tooling inventories can be rationalised while maintaining process reliability. Application guidance: finishing steel with improved economy This insert is intended primarily for turning steel where a high-quality surface and steady wear behaviour are priorities. The coated cermet substrate is particularly effective in finishing conditions and in light universal cuts when machine and clamping rigidity are adequate. Selection of the single-sided chipbreaker and correct holder geometry will be decisive for optimal chip evacuation and surface integrity; the grade’s wear resistance allows extended intervals between indexing without sacrificing surface quality, supporting efficient batch production. For tailored advice on integrating the DCMT070204 GT9530 insert into existing turning operations or for assistance selecting compatible holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — specialist consultation and product availability details are provided by the Metav Werkzeuge team Technical data Article number: 6998330 Manufacturer SKU: TUN6998330 Model series: ISO-Drehwendeschneidplatten Name: DCMT070204 GT9530 Application: Turning Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 55° Thickness: 2.38 mm Size: 07 Countersink: 40°–60° Hole: with hole Special features Coating/grade: GT9530 coated cermet Substrate: cemented carbide Chipbreaker: single-sided Insert shape: rhombic Hole style: cylindrical with countersink Compatibility: ISO-compliant insert for matching holders FAQ What materials is this insert suited for? The DCMT070204 GT9530 insert is optimised for turning steel, delivering improved surface finish and wear resistance in finishing and light universal operations. Which chip control does the insert offer? This indexable insert features a single-sided chipbreaker, designed to promote predictable chip formation and easier evacuation during finishing cuts. How does the geometry affect surface quality? The combination of a 0.4 mm corner radius, 7° clearance and rhombic form provides a stable cutting edge that helps maintain fine surface finish and dimensional consistency. Is the insert compatible with standard ISO holders? Yes, the DCMT070204 conforms to ISO dimensions; compatibility is achieved by matching form, clearance, tolerance class, fastening method, size and thickness with the chosen holder. What fastening provision does the insert have? The insert includes a cylindrical hole with a 40°–60° one-sided countersink, enabling secure clamping with standard screws and shims Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of proven finishing performance, low cutting forces and ISO compatibility for reliable, high-quality turning. Order the DCMT070204 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070204 NS9530 ISO turning insert for finishing — Tungaloy The DCMT070204 NS9530 is an ISO-standard rhombic turning insert designed for precision finishing operations in turning, offering a sharp cutting edge and low cutting forces for continuous cuts. ISO rhombic insert, 55° geometry Uncoated cermet grade NS9530 for finishing Cylindrical hole with single-sided countersink Precise 0.4 mm corner radius for fine finishes Precision finishing and surface quality for Stahl components The uncoated cermet NS9530 is engineered as a finishing grade with a sharp cutting edge that reduces cutting forces and improves surface integrity. The combination of a 0.4 mm corner radius and 55° geometry yields a controlled cut that minimises vibration and leaves a consistent surface finish, making it particularly suitable for continuous turning and small depths of cut. For manufacturers seeking reproducible part quality, the low-friction cutting action of this grade reduces the need for secondary finishing and supports higher first-pass yields. Reliable fit and secure clamping for uninterrupted production As an ISO-standard DCMT insert, compatibility with the toolholder is governed by form, 7° relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure stable clamping and repeatable seating in compatible holders or boring bars. The 2.38 mm plate thickness and standard 07 size provide predictable rigidity when paired with the correct shim or clamp set; the recommended system comprises the insert, a matching outer holder or boring bar, an underlay/clamp set and spare fixing screws to maintain uptime. Efficiency, process stability and application guidance Choosing the right chipbreaker and grade for the machining task is essential: the single-sided chipbreaker and uncoated cermet composition favour finishing of Stahl, delivering both dimensional control and excellent surface texture. The modest cutting forces associated with this combination reduce tool wear on the holder and machine spindle, which can translate into longer tool life and lower overall machining costs per part. For process planning, specify the chipbreaker geometry and stability level that match the component, machining parameters and machine condition. If application-specific recommendations are required, Metav Werkzeuge can advise on cutter selection and parameter windows to optimise throughput and quality. Contact Metav Werkzeuge for tailored advice and to procure Tungaloy DCMT070204 NS9530 inserts for high-precision finishing; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6997717 Manufacturer SKU: TUN6997717 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data Corner radius: 0.4 mm Relief angle: 7° Included angle/geometry: 55° Plate thickness: 2.38 mm Plate size: 07 Design & features ISO rhombic shape DCMT070204 Uncoated cermet grade NS9530 Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Application: Turning (finishing) Compatibility requires matching holder form, tolerance class, fastening, size and thickness System components: insert, outer holder/boring bar, underlay/clamp set, spare screws FAQ Which materials is the DCMT070204 NS9530 best suited for? The DCMT070204 NS9530 insert is a finishing grade primarily for machining Stahl, offering a sharp edge and low cutting forces suited to continuous cuts. Is this insert suitable for internal as well as external turning? Yes, the ISO rhombic form and 55° geometry allow use in both external and internal turning operations when paired with a compatible holder or boring bar. How is the insert secured in the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) for stable clamping; correct seating depends on matching form, relief angle and tolerance class. What are the benefits of the NS9530 uncoated cermet grade? NS9530 delivers a sharp cutting edge, low cutting forces and high surface quality in finishing, reducing rework and improving surface consistency. Can the DCMT070204 NS9530 be used for roughing applications? This grade and chipbreaker are optimised for finishing; for roughing, a tougher grade or different chipbreaker suited to higher depths of cut is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com