DCGW 070204 DX140 Wendeplatten - Tungaloy
Benefit from the combination of DX140 polykristalline diamond grade and ISO-compatible geometry for high cutting speeds and extended tool life, reducing downtime and part costs. Order the insert via Metav Werkzeuge or consult the team for application-specific guidance. DCGW070204 DX140 Tungaloy indexable insert for ISO turning — PCD grade for aluminium DCGW070204 DX140 Tungaloy-Wendeplatte is an ISO-standard indexable insert intended for high-speed turning of aluminium and other non-ferrous materials PCD grade DX140 for high cutting speeds ISO rhombic insert with 55° cutting angle Suitable for aluminium and non-ferrous metals Cylindrical hole with 40°–60° countersink Faster cycle times through advanced PCD grade The DX140 polycystalline diamond (PCD) cutting layer delivers very high wear resistance and enables high cutting speeds, particularly when machining abrasive non-ferrous materials. For production runs where reduced tool change frequency matters, the PCD topology provides long tool life, which translates into fewer interruptions and a lower cost per part. The combination of a hard PCD face and a carbide substrate results in consistent performance under continuous cutting, maintaining dimensional stability and predictable tool-change intervals. Reliable fit and geometry for consistent results Designed as an ISO-standard indexable plate, the insert features a rhombic form and a 55° cutting angle that suit a broad range of external and internal turning operations. The 7° relief angle reduces flank rubbing and helps extend edge life in finishing passes, while the 0.4 mm nose radius supports precise contouring and repeatable surface quality. The plate thickness of 2.38 mm and standard mounting interface — a cylindrical hole with a one-sided countersink (40°–60°) — ensure compatibility with common holders when form, clearance angle, tolerance class, fastening and size are matched. Optimised for aluminium and non-ferrous alloys This indexable insert excels on aluminium and other non-ferrous materials where PCD provides superior abrasion resistance and excellent thermal stability at high speeds. The absence of an integrated chipbreaker means the cutting strategy should be matched to material feed and toolholder rigidity; when paired with an appropriate chip control geometry and stable tooling setup, the insert delivers fine surface finish and minimal secondary operations. For abrasive non-metals or filled composites, the PCD grade reduces edge wear compared with conventional carbide tips, improving overall process efficiency. Practical handling, mounting and productivity advice The insert is supplied in the ISO DCGW format with the designation 070204 and is intended to be used with a compatible external holder or boring bar plus correct clamping pads and screws. The rhombic shape and central hole with countersink simplify positioning and torque transfer while maintaining repeatable indexability. For best results, select holder rigidity and cutting parameters that exploit the PCD’s high-speed capability; this approach maximises productivity and reduces per-piece machining costs without compromising component accuracy. For tailored cutting data or application guidance on the DCGW070204 DX140 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss tooling setup and optimise process parameters. Technical Data Article number: 6802865 Manufacturer SKU: TUN6802865 Metav SKU: 6802865-Tungaloy ISO designation: DCGW070204 DX140 Facts Radius: 0.4 mm Thickness: 2.38 mm Relief angle: 7° Cutting angle: 55° Size: 07 Special features Polycystalline diamond (PCD) cutting material, grade DX140 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) No chipbreaker (ohne) Intended application: turning ISO-standard indexable plate compatible with matching holders FAQ Which materials is this insert suitable for? The DCGW070204 DX140 insert is engineered for aluminium and other non-ferrous metals; the PCD cutting face provides wear resistance on abrasive non-metals. Is the insert compatible with standard ISO holders? Yes, the ISO-format DCGW070204 geometry ensures compatibility where holder form, relief angle, tolerance and fastening match the plate size and thickness. What are the main benefits of the DX140 PCD grade? DX140 offers high cutting speeds and extended edge life compared with conventional carbide tips, improving productivity and reducing tool-change frequency in suitable applications. Does this insert include a chipbreaker? This plate is supplied without a chipbreaker, so chip control should be achieved through cutting data, holder geometry and process parameters. What are the key dimensional details to check when fitting? Verify the central hole, one-sided countersink, plate thickness (2.38 mm), nose radius (0.4 mm) and the 55° cutting geometry for correct seating and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 070204 GH110 Wendeplatten - Tungaloy
Take advantage of a robust combination of GH110 wear resistance and a carbide substrate for consistent, repeatable turning results; the rhombic geometry with a 0.4 mm nose radius and 7° clearance secures precise contact and controlled chip formation. Order the insert through Metav Werkzeuge or request application advice from our consultants for optimal process integration. DCGW 070204 GH110 Tungaloy turning insert — ISO rhombic carbide insert for turning DCGW070204 GH110 Tungaloy turning insert designed for ISO-compliant external and internal turning operations, combining a wear-resistant grade with a stable cutting edge for productive machining ISO-compliant rhombic turning insert GH110 grade for wear resistance Carbide substrate for long tool life Cylindrical hole with single-sided countersink Reliable cutting performance for turning operations The GH110 grade, applied to a high-quality carbide substrate, provides a balanced combination of wear resistance and edge toughness suitable for a wide range of turning tasks. The rhombic geometry delivers stable engagement in both external and internal turning, while the 0.4 mm nose radius helps maintain dimensional control and surface finish. For operators seeking consistent process outputs, the interplay between the grade and the substrate reduces flank wear and extends in-service life, lowering the frequency of tool changes and improving overall productivity. Secure mounting and ISO-based compatibility Constructed as an ISO-design insert, the plate relies on precise form, clearance angle and tolerance classes to ensure compatibility with standard external holders or boring bars. The 7° clearance and a 55° included angle provide predictable cutting mechanics and facilitate straightforward seat alignment. The insert’s cylindrical hole with a single-sided countersink (40°–60°) supports secure clamping with standard screws and pads; correct seating prevents micro-movements that could otherwise affect surface integrity or tool life. Selecting an appropriate holder and clamp assembly is essential for exploiting the insert’s full performance. Application range and machining advantages Intended primarily for turning applications, the insert suits both roughing and finishing when matched to the right cutting parameters and workpiece material. The absence of a dedicated chipbreaker means machining strategy should consider feed, depth of cut and workpiece stability to ensure reliable chip control; in many cases the grade’s toughness aids in handling interrupted cuts and variable material batches. With the right set-up, users will benefit from reduced downtime, improved repeatability and lower per-part tooling costs thanks to the insert’s balanced edge stability. For precision turning with the GH110 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802863 Manufacturer SKU: TUN6802863 SKU: 6802863-Tungaloy Model series: ISO turning inserts Designation: DCGW070204 Facts Radius: 0.4 mm Thickness: 2.38 mm Insert size: 07 Clearance: 7° Included angle: 55° Special features Material: carbide Grade: GH110 (Tungaloy) Shape: rhombic Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: without FAQ What is the primary use of this insert? The DCGW070204 GH110 Tungaloy turning insert is designed for ISO-compliant external and internal turning tasks where a balance of wear resistance and edge stability is required. Which workpiece materials are suited to this grade? GH110 on a carbide substrate is suitable for a broad material spectrum; selection depends on machining strategy and stability, with the grade offering good wear resistance for mixed batches. How is the insert mounted in a holder? The insert seats into standard ISO holders or boring bars that match the rhombic form, thickness and tolerance class; the cylindrical hole with a single-sided countersink ensures secure clamping using standard screws and pads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 070204 TH10 Wendeplatten - Tungaloy
Combine the TH10 grade uncoated carbide with the rhombic DCGW geometry and a 0.4 mm corner radius to achieve low cutting forces and consistently clean surfaces; the ISO compatibility ensures straightforward integration with standard holders. Order the insert via Metav Werkzeuge or consult our specialists for application-specific advice. DCGW070204 TH10 turning insert — Tungaloy, uncoated carbide, 55° A DCGW070204 TH10 ISO‑standard turning insert engineered for external and internal turning where low cutting forces and fine surface quality are required. DCGW rhombic geometry, 55° cutting angle Uncoated carbide grade TH10 for low cutting forces 0.4 mm corner radius for clean surface finish Cylindrical hole with single‑side 40°–60° countersink Precise cutting with low forces for cleaner finishes The combination of the TH10 grade and an uncoated carbide cutting edge reduces cutting forces in applications with non‑ferrous materials, which in turn improves tool‑life stability under moderate cutting conditions. The rhombic plate shape delivers the required approach angle for many turning tasks while the 0.4 mm corner radius supports delicate finishing passes. For engineers seeking predictable material removal and a good surface without aggressive cutting parameters, this insert provides a reliable compromise between sharpness and edge strength. ISO conformity and secure clamping for reliable performance Manufactured to ISO designation DCGW070204, compatibility with holders is determined by the plate form, relief angle 7°, tolerance class, fastening method, size and thickness, all of which are standardised to allow repeatable mounting and predictable geometry at the cutting zone. The cylindrical hole with a 40°–60° single‑side countersink ensures firm seating and correct location in compatible toolholders, reducing the risk of misalignment during operations and simplifying tool change procedures. Technical support is available if matching to an existing holder requires verification. Application guidance: finishing, general turning and setup tips For external and internal turning where a fine surface is required, the modest 0.4 mm corner radius is particularly suited to finishing passes and near‑final dimensions; the lack of a built‑in chipbreaker means the cutting edge performs best with steady chip evacuation and strategies adapted to the material. The plate thickness of 2.38 mm and the 55° approach angle make the geometry suitable for a range of turning tasks, provided the holder matches the ISO form and clamping requirements. When selecting feeds and speeds, favour settings that preserve the uncoated edge to keep cutting forces low and surfaces clean. For application advice on the Tungaloy TH10 insert or to check current stock and lead times, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support and rapid availability. Technical data Article number: 6802864 Manufacturer SKU: TUN6802864 Brand: Tungaloy Model series: ISO turning inserts ISO designation: DCGW070204 Material: carbide Grade: TH10 Facts Size: 07 Cutting angle: 55° Relief angle: 7° Corner radius: 0.4 mm Thickness: 2.38 mm Special features Rhombic plate geometry Cylindrical hole with single‑side countersink (40°–60°) No chipbreaker Uncoated carbide grade TH10 Intended application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ Which materials are best suited to this insert? The DCGW070204 TH10 insert by Tungaloy is optimised for non‑ferrous materials and applications where an uncoated cutting edge supports low cutting forces and a cleaner surface finish. How is compatibility with existing holders determined? Compatibility depends on the plate form, relief angle (7°), tolerance class, fastening type, size and thickness; the ISO designation DCGW070204 indicates the standard geometry for matching holders. Does the insert include a chipbreaker? No, this insert is supplied without a chipbreaker, so chip control must be managed by process parameters or by selecting an alternative grade or chipformer suited to the work material. What surface quality can be expected with the 0.4 mm radius? The 0.4 mm corner radius is aimed at finishing passes and produces finer surface results than larger radii, while still providing a degree of edge strength suitable for conventional turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 11T302 DX140 Wendeplatten - Tungaloy
High-wear DX140 PCD cutting edges combined with a rhombic 55° geometry provide high cutting speeds and consistently long runtimes in aluminium and other non‑ferrous materials; compatibility with ISO clamping systems ensures predictable repeatability. Order directly via Metav Werkzeuge or ask the consultants if needed. DCGW11T302 DX140 Turning Insert (PCD, 55°) — Tungaloy The DCGW11T302 DX140 is an ISO‑standard rhombic PCD insert designed for high‑speed external and internal turning of aluminium and other non‑ferrous and abrasive non‑metallic materials. ISO‑standard rhombic geometry for precise turning DX140 PCD grade for long tool life 55° cutting angle for versatile external/internal work Cylindrical hole with countersink for secure clamping Boosted cutting productivity with PCD technology The combination of PCD cutting material and the DX140 grade delivers measurable benefits in cycle time and tool life: PCD resists abrasive wear far better than conventional grades, so machining of aluminium and other non‑ferrous materials can be run at high cutting speeds with reduced insert changes. The rhombic 55° geometry contributes to stable cutting forces and improved chip flow, which supports a consistent surface finish and fewer interruptions in production. Because the substrate is based on a carbide body with a PCD cutting top, the result is an insert that balances edge strength with wear resistance for sustained performance. Reliable clamping and ISO compatibility for repeatable results The insert conforms to ISO dimensions and its fit depends on form, relief angle, tolerance class, fastening, size and thickness — design choices that simplify integration into standard toolholders. The cylindrical hole with countersink (40°–60°) provides secure seating and repeatable positioning, reducing vibration and variances between assemblies. The modest 0.2 mm corner radius and 7° relief angle support accurate profile turning and controlled corner strength, giving machinists a predictable platform for both finishing and light roughing tasks. Material suitability and economical machining strategy The DX140 polykristalline diamond grade is optimised for aluminium, other non‑ferrous alloys and abrasive non‑metallics; it enables long runtimes and stable edge line when machining challenging surfaces. Selecting the appropriate chipbreaker or grade variant for the specific alloy and stability conditions remains important — inserts without a chipbreaker can be the best choice where chip control is managed by toolpath and coolant strategy. The overall system concept — ISO insert, matching external holder or boring bar, plus shim and fastening hardware — allows straightforward replacement and predictable process behaviour, leading to lower unit costs through reduced downtime. For high‑speed aluminium turning with outstanding wear resistance, choose the Tungaloy DX140 PCD insert; contact Metav Werkzeuge for availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6802867 SKU: 6802867-Tungaloy Manufacturer SKU: TUN6802867 Model series: ISO turning indexable inserts Core specifications Cutting angle: 55° Corner radius: 0.2 mm Plate thickness: 3.97 mm Plate size: 11 Relief angle: 7° Countersink angle: 40°–60° Features & suitability DX140 polykristalline diamond (PCD) Carbide substrate Rhombic plate form ISO‑standard insert designation DCGW11T302 Cylindrical hole with one‑sided countersink No chipbreaker Application: turning (external and internal) Suitable for aluminium, non‑ferrous metals and abrasive non‑metallics FAQ What materials is this insert best suited for? The DCGW11T302 DX140 insert is designed primarily for aluminium and other non‑ferrous alloys as well as abrasive non‑metallic materials, taking advantage of the DX140 PCD grade for extended runtimes. How does the DX140 grade affect machining performance? The DX140 polykristalline diamond grade provides high wear resistance and enables high cutting speeds, resulting in longer intervals between insert changes and improved productivity when machining suitable materials. Which holders are compatible with this ISO insert? Compatibility follows ISO standards and depends on form, relief angle, tolerance class, fastening, size and thickness; the insert is intended for use with matching external holders or boring bars that accept ISO rhombic DCGW‑type inserts. Does this insert include a chipbreaker? This specific variant is supplied without a chipbreaker; chip control should be achieved via toolpath, coolant and the chosen holder for the application. What clamping feature ensures repeatable seating? A cylindrical hole with a one‑sided countersink (40°–60°) secures the insert and ensures repeatable positioning when mounted with the correct screw and clamp system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 11T302 TH10 Wendeplatten - Tungaloy
Combining a sharp uncoated carbide grade TH10, a precise 55° rhombic geometry and a secure countersunk clamping hole, this insert offers low cutting forces and consistently clean surface finishes in turning operations. Order the DCGW 11T302 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. DCGW 11T302 TH10 ISO turning insert (rhombic 55°) — Tungaloy The DCGW 11T302 TH10 is an ISO‑standard rhombic turning insert designed for external and internal turning where a sharp, uncoated cutting edge supports low forces and fine surface finishes. ISO‑standard rhombic insert 55° Uncoated carbide grade TH10 for clean finishes 0.2 mm corner radius for fine profiling Cylindrical hole with countersink for secure clamping Precise, low‑force cutting for non‑ferrous components The indexable plate employs the TH10 grade, an uncoated carbide with a deliberately sharp edge geometry that reduces cutting resistance and promotes a clean surface finish on non‑ferrous materials. Because the edge is uncoated, cutting temperatures remain lower and the tendency to built‑up edge is reduced for aluminium, copper and similar alloys. The result is a more predictable dimension and fewer downstream operations, which benefits batch production and precision workshops seeking repeatable quality. Secure clamping and ISO compatibility for efficient setup As an ISO‑standard insert in rhombic format with a nominal 55° included angle, compatibility with holders depends on the insert form, clearance angle, tolerance class, fastening method, size and 3.97 mm thickness. The plate features a cylindrical hole with a single‑sided countersink (40°–60°) for stable clamping and easy indexability. The plate’s 0.2 mm corner radius offers fine profile control for finishing passes. A complete system comprises a matching external holder or boring bar, an underlay/shim and a clamping set with spare screws to ensure consistent mounting. Recommended applications and productivity advantages Engineered for external and internal turning, this ISO insert is especially suitable where low cutting forces and a sharp edge are required. The insert comes without a chipbreaker, which makes it appropriate for finishing and light‑duty operations where controlled chip flow is achieved by selecting the correct feed and cutting parameters. Shops seeking higher throughput will value the combination of predictable edge behaviour and simple indexing, while precision manufacturers benefit from reduced rework and reliable everyday performance. For precision turning with Tungaloy reliability and the sharp TH10 edge, contact Metav Werkzeuge for technical advice on holder compatibility and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802866 Manufacturer SKU: TUN6802866 Stock SKU: 6802866-Tungaloy Model series: ISO turning inserts Material: Carbide Facts ISO designation: 11T302 Included angle: 55° Corner radius: 0.2 mm Relief/freedom angle: 7° Thickness: 3.97 mm Size: 11 Special features Uncoated carbide, grade TH10 No chipbreaker Plate form: rhombic Hole: cylindrical with single‑sided countersink (40°–60°) Application: turning (external and internal) System: matching holder or boring bar, underlay/shim, clamping set and spare screws FAQ What materials is this insert best suited to machine? The DCGW 11T302 TH10 insert is optimised for non‑ferrous materials and similar alloys; the sharp uncoated TH10 grade supports low cutting forces and clean surface finishes on aluminium, copper and related materials. How does the lack of a chipbreaker affect use? A plate without a chipbreaker is ideal for finishing and light cuts where chip control is managed by feed and cutting parameters; the DCGW 11T302 TH10 delivers fine surface quality when used with appropriate feeds. Which holder characteristics determine compatibility with this ISO insert? Compatibility is determined by holder form, clearance (relief) angle, tolerance class, fastening method, insert size and thickness; the 55° rhombic shape and countersunk hole require a matching ISO‑type clamping system. What benefits does the 0.2 mm corner radius provide? The 0.2 mm radius offers precise edge rounding for fine profiling and improved edge strength during finishing passes, helping to maintain dimensional accuracy and surface integrity. Is this insert suitable for internal boring as well as external turning? Yes; the geometry and sharp TH10 grade make it suitable for both external and internal turning, provided the holder and rigidity of the setup are appropriate for the selected cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 11T304 DX140 Wendeplatten - Tungaloy
High-performance DX140 PCD cutting material combined with ISO-compatible DCGW geometry delivers extended tool life, excellent surface finish and very high cutting speeds for aluminium and non-ferrous materials. Benefit from secure clamping with a rhombic 55° form and a 7° relief for dependable repeatability. Order the DCGW11T304 DX140 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. DCGW DCGW11T304 DX140 — Turning insert by Tungaloy, PCD for aluminium and non-ferrous metals A DCGW11T304 DX140 indexable insert engineered for high-speed turning of aluminium, non-ferrous alloys and abrasive non-metals, compatible with ISO holders. PCD grade DX140 for high cutting speeds Optimised for aluminium and non-ferrous metals ISO-compatible rhombic DCGW geometry 7° relief angle with cylindrical hole and countersink Increase throughput with PCD DX140 for long tool life The polychrystalline diamond (PCD) grade DX140 provides a decisive productivity advantage when machining soft, non-ferrous materials. PCD is a sintered diamond layer on a rigid substrate that resists abrasive wear and maintains a sharp cutting edge at high cutting speeds, so tool changes are less frequent and surface quality remains consistent across long production runs. This material choice is particularly effective where abrasive inclusions or non-metallic fillers accelerate wear with conventional grades. Consistent clamping and geometric compatibility for repeatable results The rhombic DCGW form with a 55° included angle and a 7° relief angle ensures stable seating in standard ISO holders and predictable cutting engagement. The insert’s 3.97 mm thickness and 11 mm size conform to ISO tolerances, while the cylindrical hole with a single‑side countersink (40°–60°) secures the insert against rotation and axial movement. These geometric details reduce vibration, support repeatable tool indexing and simplify holder selection for a reliable production setup. Tailored for turning applications — practical guidance Designed for external and internal turning operations, this indexable solution ships without a chipbreaker (no chipbreaker) and therefore suits processes where controlled chip evacuation is achieved by tool geometry, holder set-up or low cutting depths. Select the appropriate holder, clamp and screw assembly that match the ISO form, thickness and tolerance class to exploit the insert’s PCD performance. For roughing at high feed rates or finish passes targeting superior surface integrity, the DX140 grade minimises flank wear and preserves cutting-edge geometry. Lower running costs through fewer interruptions and stable results Longer insert life directly reduces machine downtime and replenishment frequency, improving overall process economics. The combination of a hard PCD cutting layer and a rigid carrier yields stable edge retention and constant surface finish across batches — an advantage in series production where reproducibility is critical. Where process reliability matters most, the insert delivers measurable reductions in handling time and increased part throughput, supporting quality-focused manufacturing environments. Contact Metav Werkzeuge for tailored application advice and to secure Tungaloy DCGW11T304 DX140 inserts — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6802869 Manufacturer SKU: TUN6802869 SKU: 6802869-Tungaloy Model series: ISO turning indexable inserts Designation: DCGW11T304 DX140 Tungaloy insert Dimensions / Core data Inscribed circle / size: 11 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 55° Hole: cylindrical hole with single‑side countersink (40°–60°) Special features / Material & applications Cutting material: polychrystalline diamond (PCD), grade DX140 Substrate: carbide substrate for rigid support Chipbreaker: none Shape: rhombic (DCGW) Typical application: turning (external and internal) Compatibility: ISO holders matching form, relief angle, thickness and tolerance class FAQ What materials is this insert best suited for? The DCGW11T304 DX140 insert is optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic workpieces, using the PCD layer to resist wear and extend service life. Is the insert compatible with standard ISO holders? Yes, the rhombic DCGW geometry, 3.97 mm thickness and ISO code 11T304 ensure compatibility with ISO‑specified holders that match the form, relief angle and tolerance class. Does this insert include a chipbreaker? No, this variant is supplied without a chipbreaker; chip control must be addressed through tool geometry, holder arrangement or cutting parameters. How does the DX140 grade affect cutting speeds? The DX140 PCD grade allows elevated cutting speeds compared with conventional carbide grades, enabling higher throughput and extended tool life in suitable materials. What is the manufacturer’s article number and brand reference? Manufacturer article number: 6802869; brand: Tungaloy; manufacturer SKU: TUN6802869. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 11T304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 uncoated carbide grade for low cutting forces, a 0.4 mm corner radius for accurate contours and ISO conformity for reliable holder compatibility – all contributing to steady production results. Order the DCGW11T304 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. DCGW 11T304 TH10 ISO turning insert for turning — Tungaloy DCGW11T304 TH10 is an ISO‑standard indexable insert for external and internal turning applications, designed as a rhombic insert with a 55° principal angle and a sharp carbide grade for clean surface finishes ISO‑standard rhombic turning insert Uncoated TH10 carbide for low cutting forces 0.4 mm corner radius for precise contours Cylindrical hole with 40°–60° countersink High efficiency from a sharp uncoated carbide grade The insert combines the TH10 uncoated carbide grade with an acute geometry to deliver low cutting forces and a clean surface on non‑ferrous materials and similar applications. The sharp cutting edge reduces power draw and allows lighter‑duty machines to maintain stable feeds and speeds, improving throughput without increasing cutting energy. The lack of coating helps achieve burr‑free finishes where adhesion of coatings can be a concern. This results in predictable tool behaviour and consistent component quality across production runs. Proven ISO compatibility and secure clamping for stable machining Specified to the ISO series of turning inserts, the component’s rhombic form, 55° main angle and defined 7° clearance enable straightforward matching to ISO holders. The insert thickness of 3.97 mm and nominal size 11 ensure the seating geometry aligns with standard clamps. A cylindrical hole with a single‑side countersink (40°–60°) supports reliable positioning and repeatable clamping torque, reducing chatter and minimising setup time. These features combine into a system that favours process stability and repeatability on production‑oriented lathes. Precise contours and application guidance for shop use With a 0.4 mm corner radius, the insert is suited to detail work and fine contouring where edge definition matters. As this grade has no integrated chipbreaker, the selection of an appropriate chip control device should follow material and operation type; in many non‑ferrous turning tasks, the unbroken edge produces excellent surface integrity. The insert is part of an ISO insert system — pairing it with the correct external holder or boring bar, plus the appropriate clamping set and replacement screws, ensures optimal performance. Technical queries regarding holder compatibility or process selection can be addressed by Metav Werkzeuge’s consultants. For process advice or to secure supply of the Tungaloy DCGW11T304 TH10 indexable insert, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or +49 2822 7131930 — Metav Werkzeuge will advise on the ideal holder and clamping solution for the intended turning application Technical data Article number: 6802868 SKU: 6802868-Tungaloy Manufacturer SKU: TUN6802868 Model series: ISO‑Drehwendeschneidplatten Application: Turning Material: carbide Numbers Size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Main angle: 55° Designs / Special features Shape: rhombic Hole: with hole Hole style: cylindrical hole + single‑sided countersink (40°–60°) Grade: TH10, uncoated carbide Chipbreaker: none FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is intended primarily for non‑ferrous materials and for operations that benefit from low cutting forces and a clean surface; the DCGW11T304 TH10 insert by Tungaloy (SKU 6802868‑Tungaloy) matches these requirements. Which turning operations can this insert be used for? The insert is suitable for both external and internal turning tasks; its rhombic geometry and 55° principal angle support profile work, light shoulder cuts and general finishing in compatible materials. How is compatibility with holders ensured? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation and the 3.97 mm thickness make the insert compatible with standard ISO‑conforming holders and boring bars when matched correctly. Does the insert include a chipbreaker? This grade is supplied without an integrated chipbreaker; users should select a suitable chip control measure or a different insert geometry where controlled chip formation is required. How does the hole and countersink support clamping? The cylindrical hole combined with a single‑side countersink (40°–60°) allows precise positioning and secure clamping, promoting repeatable seating and reduced vibration during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGW 11T308 DX140 Wendeplatten - Tungaloy
Die Kombination aus hoher Schnittgeschwindigkeit dank PCD-Schneidstoff und der robusten DX140-Sorte sorgt für sehr lange Standzeiten und stabile Zerspanungsergebnisse. Nutzen der ISO-Normkompatibilität und der präzisen Lochgeometrie für zuverlässige Spann- und Einsatzbedingungen – direkt bestellbar über Metav Werkzeuge oder technische Beratung anfordern. DCGW 11T308 DX140 turning insert by Tungaloy — PCD grade for high-speed aluminium turning DCGW11T308 DX140 is an ISO rhombic turning indexable insert designed for high-speed machining of aluminium, non-ferrous metals and abrasive non-metal materials; suited to both external and internal turning applications. Polychrystalline diamond (PCD) cutting grade DX140 ISO rhombic form DCGW 11T308 with 55° angle Cylindrical hole with single-sided countersink Long tool life for abrasive non-metal materials Faster aluminium and non-ferrous machining with PCD performance The PCD cutting layer in grade DX140 offers extremely low wear rates when machining aluminium and similar soft, abrasive materials. This translates into high cutting speeds and fewer tool changes, reducing cycle times and improving productivity on serial turning operations. Polykristalliner Diamant provides a hard, wear-resistant cutting edge with minimal built-up edge tendency, which also helps to maintain stable surface finish over long runs. For operations where short setup time and long tool life matter, this insert achieves measurable time savings and consistent part quality. Precise ISO fit and secure clamping for repeatable results Designed as an ISO-standard insert, the component’s compatibility with holders depends on form, relief, tolerance class, fastening, size and thickness. The rhombic geometry with a 55° cutting angle and 7° clearance ensures predictable cutting behaviour and chip flow. The cylindrical hole with single-sided countersink (40°–60°) offers reliable centring and clamping; the plate thickness of 3.97 mm and the size designation 11 define the correct seat geometry for compatible external holders or boring bars. Proper selection of holder and shim set means repeatable seating, accurate runout and improved tool life. Practical guidance for shop-floor application and system setup Use this PCD-indexable insert for external turning and internal turning of aluminium, brass and abrasive non-metal materials; avoid use on hardened steels or materials that generate excessive cutting temperatures unsuitable for diamond. The system comprises the ISO insert, a matching external holder or boring bar, an underlay or clamping set and replacement screws. Note that this insert is supplied without a chipbreaker, so cutting parameters and feed must be selected to match workpiece stability and material removal rate. The clear benefit is fewer interruptions for tool changes and steady surface quality across production batches. For tailored advice on selecting the right Tungaloy PCD insert for a specific aluminium application, contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to support ordering and implementation. Technical data Article number: 6802871 Manufacturer SKU: TUN6802871 SKU: 6802871-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Insert angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Size: 11 Special features Material: carbide substrate with PCD cutting layer Grade: DX140 (PCD) Shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: none Application: external and internal turning of aluminium, non-ferrous metals and abrasive non-metals FAQ What materials is this insert best suited for? The DCGW11T308 DX140 insert is intended primarily for aluminium, non-ferrous metals and abrasive non-metal materials, where the PCD cutting edge delivers long life and consistent surface finish. Can this insert be used for internal turning on a boring bar? Yes, the ISO rhombic form and the cylindrical hole with countersink allow secure clamping in suitable boring bars for internal turning operations. Is there a chipbreaker included with this insert? This insert is supplied without a chipbreaker; cutting parameters should be adapted and a suitable holder chosen to ensure stable chip control. How does the DX140 grade affect tool life? The DX140 PCD grade is formulated for high wear resistance during high-speed cutting of soft, abrasive materials, resulting in significantly extended tool life compared with conventional grades. What does the system setup for using this insert include? A typical setup comprises the ISO insert, a compatible external holder or boring bar, an underlay/clamping set and replacement screws for correct mounting and repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 11T308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of the uncoated TH10 carbide grade, the 55° rhombic geometry and the 0.8 mm nose radius to achieve low cutting forces and a clean surface finish in non-ferrous turning operations; order the insert directly via Metav Werkzeuge or ask our consultants for application support. DCGW 11T308 TH10 Tungaloy turning insert — ISO rhombic, 55°, 0.8 mm radius The DCGW11T308 TH10 is an ISO-standard rhombic indexable insert designed for versatile external and internal turning applications, optimised for non-ferrous alloys and finishing cuts. 55° rhombic geometry for versatile turning Uncoated carbide grade TH10 for low cutting forces 0.8 mm nose radius for reliable edge form Cylindrical hole with single-sided countersink Consistent cutting performance through optimised geometry The rhombic 55° geometry combined with a 0.8 mm nose radius produces a reliable cutting edge that reduces vibration and lowers instantaneous cutting forces. This geometry is particularly advantageous for operations requiring stable tool engagement and predictable chip flow; the result is improved process stability and consistent surface finish on components. The insert form supports both external and internal turning, allowing more predictable tool paths and repeatable part quality when paired with a correctly matched holder. Uncoated TH10 carbide for low forces and clean finishes The uncoated carbide compound TH10 delivers a sharp cutting edge that minimises built-up edge and reduces cutting resistance, which is beneficial when machining aluminium, brass and other non-ferrous materials. Unlike coated grades that favour higher temperature resistance, this grade prioritises initial edge sharpness and low friction, helping to achieve a clean surface finish with reduced burr formation. For customers seeking fine finishing or light interrupted cuts, this grade offers an excellent balance of edge strength and low cutting effort. Practical system compatibility and application guidance As an ISO-standard insert, compatibility is governed by the insert form, relief angle, tolerance class, fastening and overall size and thickness. The insert is supplied with a cylindrical hole and single-sided countersink (40°–60°), designed for secure clamping in standard holders and boring bars. Note that this insert is supplied without a chipbreaker, making it suited to finishing passes or to applications where chip control is managed by the toolholder and process parameters. For reliable integration into existing tool systems, select a holder that matches the insert profile and ensure correct clamp torque and shim usage; Metav Werkzeuge can provide holder recommendations and cutting-data sheets for optimised throughput. For tailored cutting data, holder matching or to place an order for the DCGW11T308 TH10 Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and rapid supply. Technical Data Article number: 6802870 Manufacturer SKU: TUN6802870 SKU: 6802870-Tungaloy Model series: ISO turning indexable inserts Facts Radius: 0.8 mm Geometry angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size: 11 mm Hole: cylindrical hole + single-sided countersink (40°–60°) Special features Material: cemented carbide Grade/coating: TH10, uncoated Chipbreaker: without Plate form: rhombic Application: Turning (external and internal) System: ISO insert, compatible holder or boring bar, shim/locking set and replacement screws FAQ What materials is this insert best suited for? The DCGW11T308 TH10 insert is optimised for non-ferrous materials such as aluminium and brass; the uncoated TH10 grade supports low cutting forces and clean finishes. Does the insert include a chipbreaker? No, this indexable insert is supplied without a chipbreaker, so chip control should be provided by the chosen holder or adjusted cutting parameters. How is compatibility with holders determined? Compatibility depends on the insert form, clearance angle (7°), tolerance class, fastening and the insert’s size and thickness; confirm holder matching using the ISO form and the specified dimensions. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6802870; manufacturer SKU TUN6802870; SKU 6802870-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCLN L2020K Wendeplatten - Tungaloy
Benefit from the ISO‑compatibility, robust carbide construction and precise 7° clearance to maintain consistent production quality and interchangeability. Take advantage of the rhombic 55° geometry and a 2.38 mm plate thickness for stable clamping and repeatable turning results. Order the DCLNL2020K Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCLNL2020K — DCLN L2020K turning insert by Tungaloy The DCLNL2020K is an ISO‑standard rhombic turning insert designed for external and internal turning operations with standard clamping systems ISO‑standard rhombic insert, 55° geometry Carbide construction for reliable wear resistance 7° clearance angle for consistent surface finish Suitable for external and internal turning operations Precision compatibility for smooth changeovers The combination of an ISO‑standard designation and a rhombic, 55° approach angle ensures straightforward interchangeability in industrial turning fixtures. Because the insert follows ISO norms, compatibility with matching holders is determined by form, clearance, tolerance class, fastening and thickness, which reduces setup time and supports consistent tool indexing. The 2.38 mm plate thickness and L2 size offer reliable seating in the clamp, while the absence of a central hole simplifies installation on holders designed for pocket clamping. This standardised fit is particularly valuable where frequent insert changes are required for high‑mix production. Durable cutting performance and material handling Built from solid carbide, the insert is designed for stable chip formation and extended tool life under industrial turning conditions. The geometry and negative clearance help deliver an improved surface finish on turned components, while the solid carbide body contributes to heat resistance and edge stability during interrupted cuts. When a chip‑control feature is required, the lack of an integrated chipbreaker means an appropriate breaker and grade should be selected to match the workpiece material and machining strategy, enabling optimised productivity in both roughing and finishing passes. System guidance and practical selection tips The insert is part of a complete ISO turning plate system comprising the insert, a matching outside holder or boring bar, and the necessary locating and clamping components. Selection of the correct holder depends on form, tolerance class and fastening type; choosing the correct combination ensures repeatable clamping forces and consistent cutting conditions. For applications where chip control and heat management are critical, pair the plate with a suitable chipbreaker and pick a carbide grade matched to the workpiece. Technical documentation and compatibility charts can assist in selecting the correct holder geometry and screw set for secure retention and predictable repeatability. Contact Metav Werkzeuge today for application advice, availability and to order the Tungaloy DCLNL2020K insert; technical consultation is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6802874 Manufacturer SKU: TUN6802874 SKU: 6802874-Tungaloy Facts Clearance angle: 7° Insert angle: 55° Thickness: 2.38 mm Size: L2 Special features ISO turning insert series Rhombic plate form Carbide material Without chipbreaker Without hole Compatible with holder determined by form, clearance, tolerance class, fastening, size and thickness FAQ What holder characteristics must be matched for reliable clamping? Matching the holder requires attention to form, clearance angle, tolerance class, fastening and plate thickness; the DCLNL2020K insert is designed to seat securely when these parameters correspond to the holder pocket. Is this insert suitable for internal turning as well as external turning? Yes; the rhombic geometry and ISO format make the insert appropriate for both external and internal turning when used with a compatible boring bar or internal holder. How should chip control be addressed given there is no chipbreaker on the plate? Because the DCLNL2020K does not include an integrated chipbreaker, select a matching chipbreaker and carbide grade suited to the workpiece material and operation to ensure controlled chip evacuation and consistent surface finish. What does the 7° clearance mean for surface finish and tool life? A 7° clearance reduces friction at the flank face and helps achieve a consistent surface finish, while also contributing to predictable edge engagement that supports longer tool life under correct cutting conditions. Are original spare parts and screws available for installation and replacement? Spare screws and clamping components matching the ISO system are required for correct installation; the insert is part of a standardised system that permits straightforward sourcing of replacement clamping kits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCLN R2020K Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a compact rhombic form and high‑quality carbide to secure consistent turning performance and reliable tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for holder compatibility and cutting data. DCLNR2020K indexable turning insert — ISO rhombic R2, 7° relief, 55° lead angle (Tungaloy) DCLNR2020K is an ISO‑compatible indexable insert for precision external and internal turning, designed to fit ISO holders where form, relief angle and tolerance class match the clamping system ISO rhombic insert R2 7° relief angle 55° lead angle for general turning Carbide body for reliable wear resistance Accurate ISO fit for predictable clamping and repeatable results The ISO standardisation of this rhombic indexable insert ensures straightforward selection and predictable interface geometry with ISO holders. The combination of a defined 7° relief angle and the 55° lead angle reduces unwanted rubbing and supports consistent cutting engagement, which directly benefits process stability and surface finish. Compatibility depends on holder form, tolerance class, fastening and the insert thickness, so the intended clamping system must be verified before installation. Carbide construction that supports productivity and tool life Manufactured from carbide, the insert delivers wear resistance and stable cutting behaviour under typical turning conditions. Carbide substrates provide thermal stability and edge robustness, which helps to maintain dimensional accuracy over extended production runs. Selecting the correct grade and, where available, a matching chipbreaker or coating will further extend service life and reduce changeover frequency, thus improving overall machining economy. Designed for flexible external and internal turning applications This rhombic insert is suitable for both external and internal turning when the geometry and holder type are appropriate. The insert is supplied without a chipbreaker and without a hole, offering freedom to pair it with holder styles and cutting strategies that match the component material and machinability. For materials with challenging chip control, a dedicated chipbreaker or adjusted cutting parameters should be chosen to secure reliable chip evacuation. Practical system approach for consistent production workflows Use the insert as part of a complete system comprising an ISO insert, a matched external holder or bar, a shim/clamp set and the required replacement screws; this arrangement promotes consistent clamping forces and repeatable insert seating. Clear identification of size R2 and plate thickness facilitates inventory management and quick replacement. When process reproducibility and reduced set‑up time are priorities, the standardised geometry and carbide construction support stable, productive turning operations. For expert advice on holder compatibility, cutting data or to order the DCLNR2020K Tungaloy indexable insert through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802879 Manufacturer SKU: TUN6802879 Model series: ISO‑turning indexable inserts Material: Carbide Core dimensions Relief angle: 7° Lead angle: 55° Plate thickness: 2.38 mm Size designation: R2 Features and suitability Rhombic plate form Without hole Without chipbreaker Application: turning (external and internal) Compatibility determined by holder form, relief angle and tolerance class FAQ What holder types are compatible with this insert? Compatibility depends on the ISO holder form, clamping concept and tolerance class; the DCLNR2020K Tungaloy indexable insert (SKU 6802879‑Tungaloy) is intended for standard ISO rhombic holders with matching seat and fastening. Is this insert supplied with a chipbreaker or hole? The DCLNR2020K comes without a chipbreaker and without a hole, allowing choice of holder and chip control strategy to suit the workpiece material and process. Which materials can be machined with this insert? The insert is a carbide grade designed for general turning tasks; the correct chipbreaker or grade should be selected according to the specific workpiece material and cutting conditions for optimal results. How does the 7° relief and 55° lead angle affect cutting? The specified relief and lead angles reduce flank contact and moderate cutting forces during engagement, improving surface finish and helping to preserve edge life under typical turning feeds and speeds. What system components are recommended for reliable clamping? A matched ISO holder or boring bar, the appropriate shim/clamp set and correct replacement screws are recommended to ensure stable clamping and repeatable positioning of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide, a 0.2 mm corner radius and ISO compatibility for stable, repeatable turning performance; order the DCMT070202 AH120 indexable insert directly via Metav Werkzeuge or consult the technical advisors for tailored support. DCMT 070202 AH120 Tungaloy – Indexable turning insert, PVD-coated carbide The DCMT070202 AH120 is an ISO-standard indexable turning insert engineered for external and internal turning where a sharp cutting edge and process security are required. ISO rhombic insert DCMT 07 form PVD-coated carbide for high wear resistance 0.2 mm corner radius for precise finishes Cylindrical hole with 40°–60° countersink Consistent cutting performance through robust coating and grade The AH120 grade combines a PVD-coated surface with a wear- and chip-resistant carbide substrate to deliver long tool life and stable cutting behaviour. The protective coating reduces abrasive wear and improves resistance to built-up edge formation, which supports consistent component tolerances across production runs. For machining operations that demand a reliable cutting edge and steady process control, this combination reduces unplanned tool changes and contributes to improved productivity. Geometry engineered for repeatable surface quality The insert’s rhomboid geometry with a nominal 55° lead angle and a 0.2 mm corner radius provides a balance between robustness and finish capability. The 7° relief angle ensures secure seating in typical ISO holders while enabling effective chip formation. The plate thickness of 2.38 mm and size 07 maintain mechanical rigidity for stable cutting, and the cylindrical hole with one-sided countersink (40°–60°) permits correct clamping and orientation in compatible toolholders. These geometric elements together help produce consistent surface finishes and predictable tool behaviour even when switching between similar workpieces or machines. Practical selection and system compatibility for turning tasks Designed as a component of an ISO insert system, the package requires a compatible external holder or boring bar plus the appropriate backing/clamp set and replacement screws. Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; verify the holder matches the ISO DCMT form and the specified clamping style. The single-sided chipbreaker is suitable for general turning operations where a controlled chip flow is preferred; select the chipbreaker and grade according to the workpiece material, cut type and machining stability to achieve the best balance of tool life and part quality. For robust, process-secure turning, specify the Tungaloy AH120 DCMT070202 insert and contact Metav Werkzeuge for availability and application guidance. Technical Data Article number: 6852449 SKU (vendor): 6852449-Tungaloy Manufacturer SKU: TUN6852449 Manufacturer article number: 6852449 Model series: ISO-Drehwendeschneidplatten Facts Size: 07 Corner radius: 0.2 mm Relief angle: 7° Insert angle: 55° Plate thickness: 2.38 mm Special features Material: carbide Grade/type: AH120 (PVD-coated) Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ What work is the DCMT070202 AH120 insert intended for? The DCMT070202 AH120 indexable turning insert from Tungaloy is intended for external and internal turning where a sharp cutting edge and process security are priorities. How does the AH120 grade affect tool life? The AH120 PVD-coated carbide grade increases wear resistance and reduces chipping, so the DCMT070202 AH120 insert maintains cutting-edge integrity for extended runtimes. Which holders are compatible with this insert? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the DCMT070202 requires a holder compatible with ISO rhombic DCMT 07 geometry and the specified clamping style. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius on the DCMT070202 AH120 creates a compromise between edge strength and the ability to achieve finer surface finishes, making it suitable for many standard finishing and semi-finishing operations. Is the insert supplied with screws or clamps? The DCMT070202 AH120 is supplied as the insert itself; system components such as the matching external holder, backing/clamp set and replacement screws are part of the complete tooling setup and should be sourced separately. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, a universal AH6225 grade for stainless steels, and ISO compatibility to ensure consistent turning results and efficient tool inventory management; order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. DCMT 070202 AH6225 Tungaloy insert — ISO rhombic turning insert, PVD-coated carbide A DCMT070202 AH6225 Tungaloy insert engineered for external and internal turning, offering a sharp yet stable cutting edge for medium machining of stainless steels under varying conditions. PVD-coated carbide for stainless steels ISO rhombic shape 07 for broad compatibility 0.2 mm corner radius for fine finishing Cylindrical hole with countersink (40°–60°) Single-sided chipbreaker for controlled chips Consistent performance for stainless-steel turning The combination of a PVD coating and a carbide substrate yields a blade that balances edge sharpness with wear resistance, suitable for medium-turning operations on stainless steels. The AH6225 grade is formulated as a universal option for rostfreier Stahl, providing a reliable cutting edge across changing process conditions. For shops seeking predictable tool life, the coated carbide reduces adhesion and notch wear so that production remains stable even when workpiece batches vary in hardness or surface condition. Secure clamping and ISO-based compatibility Designed to the ISO series, the rhombic 07 form and precise geometry mean that the insert aligns with standard holders when shape, clearance angle and thickness match. The cylindrical hole with a single-sided countersink (40°–60°) ensures repeatable, secure mounting in compatible toolholders and boring bars, while the 7° clearance supports chip evacuation and reduces rubbing. These mechanical features simplify tool management: one insert family fits a wide range of ISO toolholders, reducing setup time and inventory complexity. Practical advantages for workshop efficiency A small 0.2 mm corner radius provides a blend of edge strength and surface finish, making the insert suitable for finishing passes where a fine profile is required. The single-sided chipbreaker helps produce regular, manageable chips when turning rostfreier Stahl, lowering the risk of entanglement and improving operator safety. The insert’s 2.38 mm thickness and compact rhombic form enable versatile use in both external and internal operations, while the AH6225 grade supports a broad material mix—allowing fewer grade changes and a leaner tooling strategy. Contact Metav Werkzeuge today to discuss how the Tungaloy DCMT070202 AH6225 insert can streamline stainless‑steel turning operations and to arrange an application consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947687 SKU: 6947687-Tungaloy Manufacturer SKU: TUN6947687 Manufacturer article number: 6947687 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Core dimensions Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 55° Angle designation: 070202 Features Grade: AH6225 Coating: PVD Shape: rhombic Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning Typical system: ISO insert + external holder or boring bar + shim/clamping set + replacement screws FAQ What materials is this insert best suited for? The Tungaloy DCMT070202 AH6225 insert is optimised for stainless steels, with the AH6225 grade offering universal performance for rostfreier Stahl under medium cutting conditions. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions and the rhombic 07 form, so compatibility depends on matching holder form, clearance angle, tolerance class, fastening and thickness. How does the PVD coating affect performance? The PVD coating increases wear resistance and improves edge stability on the AH6225 grade, extending tool life and reducing adhesion when machining stainless steels. What chip control can be expected with this geometry? The single-sided chipbreaker is designed to produce predictable chip forms during turning of rostfreier Stahl, aiding evacuation and reducing the likelihood of chip jamming. Can the insert be used for both external and internal turning? Yes. The insert’s rhombic shape and moderate thickness allow use in both external holders and boring bars as part of a standard ISO system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide cutting grade, a sharp yet stable cutting edge for stainless steel, and a compact 0.2 mm nose radius to maintain consistent component quality and longer tool life; order the insert directly via Metav Werkzeuge or consult the team for application support. DCMT 070202 AH6225 Tungaloy indexable insert for turning The DCMT070202 AH6225 Tungaloy insert is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for machining stainless steels under variable conditions. PVD-coated carbide grade AH6225 Designed for stainless steel turning ISO rhombic insert, size 07, 0.2 mm radius Cylindrical hole with single-side countersink Precision chip control for consistent surfaces The PVD-coated carbide composition and the integrated single-sided chipbreaker deliver reliable chip control during medium machining. This results in fewer interruptions for chip clearing and a more consistent finish on turned components. The combination of a sharp, stable cutting edge and the moulded chip geometry reduces vibration tendencies, which supports tighter dimensional repeatability and a predictable surface quality on each workpiece. Optimised for stainless steels and mixed conditions Engineered as a universal grade for stainless steel, the AH6225 grade balances wear resistance and edge sharpness to cope with variable cutting conditions. The substrate and coating work together to resist built-up edge formation while retaining a usable cutting edge over longer cycles. For workshops facing frequent material changes, this insert offers a pragmatic compromise between aggressiveness and longevity, supporting steady production without frequent insert swaps. Compact geometry for flexible fixture compatibility The ISO rhombic form with size 07 and a 0.2 mm nose radius yields a good mix of accessibility and precision in tight features. The insert features a 7° clearance angle and a 55° main cutting angle, while the cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping in standard holders. The insert’s dimensions and tolerance class make integration straightforward in common external holders or boring bars when the correct seat and clamp are used, simplifying tool inventory management on the shop floor. The DCMT070202 AH6225 Tungaloy insert is compatible with ISO‑standard toolholders that match form, size and thickness. Productivity gains and process reliability By combining a robust grade with a controlled edge geometry, the insert supports productive turning cycles and reduced changeover frequency. The balanced properties of the cutting material help to maintain cutting performance across medium cutting parameters, which can translate into higher uptime and lower indexable insert consumption over a production run. This makes the insert a practical choice for job shops and production environments seeking cost‑efficient component throughput without compromising on finish or process stability. For tailored advice on applying the Tungaloy AH6225 insert in specific turning operations, contact Metav Werkzeuge for technical guidance and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903291 Item SKU: 6903291-Tungaloy Manufacturer SKU: TUN6903291 Model series: ISO turning indexable inserts Material: Carbide Facts ISO designation: 070202 Insert form: Rhombic (07) Nose radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Main cutting angle: 55° Hole: with cylindrical hole + single-side countersink (40°–60°) Special features Grade: AH6225 Coating: PVD One-sided chipbreaker Universal for stainless steel machining Suitable for external and internal turning ISO‑standard indexable insert FAQ What materials is this insert suitable for? The DCMT070202 AH6225 Tungaloy insert is formulated primarily for stainless steel applications but performs well in a range of alloys where a sharp, stable edge is required. How is the insert clamped in the holder? Clamping requires a matching ISO seat and clamp; the insert has a cylindrical hole with a single‑side countersink, which ensures secure fixation when used with the appropriate screw and clamp set. Can this insert be used for finishing passes? Yes; with its 0.2 mm nose radius and sharp edge geometry the insert is suitable for achieving good surface finishes in medium to finishing operations, provided cutting conditions and holder rigidity are adequate. Is this insert compatible with all ISO holders? Compatibility depends on holder form, clearance, tolerance class, size and thickness. The DCMT070202 format fits ISO rhombic 07 seats; verify holder specifications before use. What does the AH6225 grade offer compared with other grades? The AH6225 grade is a balanced PVD-coated carbide designed to combine a sharp, stable edge with improved wear resistance for variable stainless steel machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH6225 Wendeplatten - Tungaloy
Benefit from a PVD-coated carbide grade AH6225, the 55° rhombic geometry and a precise 0.2 mm corner radius for consistent edge life and stable performance in mixed turning tasks. Order the insert directly via Metav Werkzeuge or request technical consultation for application support and rapid availability. DCMT 070202 AH6225 turning insert, 55° rhombic — Tungaloy The DCMT070202 AH6225 is a PVD-coated carbide indexable insert engineered for external and internal turning, offering a sharp yet robust cutting edge optimised for rostfreier Stahl. DCMT070202 geometry, 55° rhombic PVD-coated carbide grade AH6225 0.2 mm corner radius for fine turning Cylindrical hole with one-sided countersink Consistent cutting performance with economical edge life The PVD-coated carbide grade AH6225 combines wear resistance with a cutting-edge geometry to deliver reliable results on mixed-production runs. The coating reduces flank wear at moderate cutting depths while maintaining a sharp cutting edge, which supports longer intervals between index changes and stabilises cycle times. For routine external and internal turning, the rhombic 55° form ensures predictable engagement angles and contributes to uniform surface finish without frequent adjustments. Controlled chip formation for rostfreier Stahl and similar alloys A single-sided chipbreaker design promotes defined chip separation under varying conditions, improving process security when machining rostfreier Stahl. The controlled chip flow reduces the risk of built-up edge and improves evacuation from confined bores and external contours. Because the grade targets a balance between sharpness and stability, it suits intermittent cuts and variable feed scenarios where consistent chip control prevents downtime and toolholder interference. Compatibility and clamping considerations for straightforward integration The insert’s rhombic shape with a cylindrical hole and one-sided countersink (40°–60°) matches common ISO tooling systems; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. With a nominal thickness of 2.38 mm and a relief clearance angle of 7°, the insert integrates into many standard external holders and boring bars when the correct seat and fastener configuration are used. This predictability simplifies tool set-up and reduces adapter or fixture changes in mixed fleets. Practical advantages for production and maintenance planning The small 0.2 mm corner radius enables fine finishing passes and dimensional control on narrow profiles, while the universal character of the grade reduces tool inventory complexity across batches. The insert is part of an ISO-based system that uses the indexable plate, suitable holder or boring bar, locating pad/clamp set and replacement screws to form a complete cutting assembly. Specifying this insert supports stable process windows and easier requalification during production runs, contributing to higher throughput and fewer unexpected interruptions. For processes that demand consistent edge life in rostfreier Stahl, contact Metav Werkzeuge to secure the Tungaloy DCMT070202 AH6225 insert and obtain tailored setup advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for swift technical support and supply. Technical data Article number: 6947696 Manufacturer SKU: TUN6947696 SKU: 6947696-Tungaloy Name: DCMT070202 AH6225 Tungaloy insert Facts Geometry angle: 55° Relief (clearance) angle: 7° Corner radius: 0.2 mm Thickness: 2.38 mm ISO designation: 070202 Special features PVD-coated carbide (AH6225) One-sided chipbreaker Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Designed for external and internal turning Compatible with ISO turning holders and boring bars Optimised for rostfreier Stahl applications FAQ What work is the DCMT070202 AH6225 best suited for? The DCMT070202 AH6225 insert is designed for external and internal turning, offering a balance between edge sharpness and stability for medium machining tasks, especially when rostfreier Stahl is involved. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance and clamping; the DCMT070202 follows ISO geometry and fits holders designed for DCMT-format rhombic inserts with a central hole and countersink. How does the AH6225 grade behave on rostfreier Stahl? AH6225 is a universal, PVD-coated carbide grade formulated to maintain a sharp, stable edge on rostfreier Stahl, improving chip control and reducing flank wear under varying conditions. Is the 0.2 mm corner radius suitable for finishing? Yes, the 0.2 mm corner radius offers fine finishing capability and good dimensional control on narrow profiles while still providing sufficient strength for light to medium cuts. What are the fastening details for the insert? The insert features a cylindrical central hole with a one-sided countersink (40°–60°); correct clamping hardware and locating pad are required for safe and repeatable fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide AH6235 grade, ISO DCMT070202 geometry and a 0.2 mm nose radius for reliable turning of stainless steel and interrupted cuts; order directly via Metav Werkzeuge or ask the consultants for application support. DCMT070202 AH6235 Tungaloy indexable turning insert — ISO rhombic geometry for turning A DCMT070202 AH6235 indexable insert designed for robust external and internal turning, optimised for stainless steel and machining with increased risk of edge breakouts. PVD-coated carbide AH6235 for stainless steel ISO rhombic DCMT070202 geometry 0.2 mm nose radius for fine profiles One-sided chipbreaker and secure clamping Consistent performance on stainless steel and interrupted cuts The PVD-coated carbide grade AH6235 is formulated for tougher machining conditions and offers improved resistance to built-up edge when cutting stainless steel. This combination leads to more consistent cutting forces and reduced edge chipping under interrupted cuts, which translates into longer tool life and fewer insert changes. The tougher substrate and coating synergy support higher process reliability in batch and single-piece production, enabling predictable cycle times and less scrap. Secure seating and ISO compatibility for repeatable setups The rhombic ISO DCMT070202 form provides a standardised fit for compatible holders; the insert is supplied with hole and a cylindrical hole plus single-side countersink (40°–60°) to ensure positive location and repeatable clamping. The 55° lead angle and 7° clearance combine to give reliable cutting engagement while maintaining rigidity at the cutting edge. Where fixture repeatability and secure clamping are essential, this geometry simplifies tool selection and reduces setup variability across different turning centres. Controlled surface finish and chip behaviour for efficient turning A 0.2 mm nose radius paired with a one-sided chipbreaker promotes predictable chip formation and improved surface quality on both external and internal contours. The insert's 2.38 mm thickness and rhombic form factor support stable edge retention when profiling or finishing small diameters. These characteristics allow operators to balance surface finish against cutting forces: choose smaller nose radii for fine finishing, or leverage the robust grade for semi-finishing and operations prone to vibration or material discontinuities. The insert is intended for use within a system comprising a compatible holder, clamping set and securing screws to ensure repeatable performance. Contact Metav Werkzeuge for tailored machining advice on Tungaloy AH6235 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903469 Manufacturer SKU: TUN6903469 SKU: 6903469-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Nose radius: 0.2 mm Clearance angle: 7° Lead/approach angle: 55° Thickness: 2.38 mm Size: 07 Special features PVD coating, AH6235 grade Designed for stainless steel and interrupted cuts One-sided chipbreaker Rhombic insert, ISO DCMT070202 With hole: cylindrical hole + single-side countersink (40°–60°) Compatibility: ISO-style external holder, clamping set and replacement screws FAQ What materials is this insert suitable for? The DCMT070202 AH6235 insert is designed primarily for stainless steel and offers robust performance on materials with similar work-hardening tendencies. Can the insert be used for interrupted cuts and unstable conditions? Yes, the AH6235 grade and PVD coating of the DCMT070202 insert are selected for applications with increased breakout risk and interrupted cutting. What holder features are required for secure clamping? Use an ISO-compatible rhombic holder with a matching pocket for DCMT070202 geometry; the insert is supplied with a cylindrical hole and single-side countersink to ensure correct seating and clamping. How does the 0.2 mm nose radius affect the machining result? A 0.2 mm nose radius on the DCMT070202 insert provides a balance between fine surface finish and edge strength, suitable for profiling and finishing small features. Is this insert suitable for internal and external turning operations? The ISO rhombic form and chip geometry of the DCMT070202 AH6235 insert make it suitable for both external and internal turning, subject to correct holder selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a universal AH725 PVD-coated carbide grade and proven chip control for stable, cost-efficient turning cycles; order the insert directly via Metav Werkzeuge or consult the team for application advice. DCMT 070202 AH725 indexable turning insert for turning – Tungaloy The DCMT070202 AH725 is an ISO‑norm rhombic indexable insert designed for external and internal turning, offering robust PVD‑coated carbide performance for mixed steels and stainless steels. ISO‑norm rhombic insert, DCMT size PVD‑coated carbide AH725 grade Single‑sided chipbreaker for controlled chips Hole with cylindrical bore and countersink Stable cutting on mixed steels for predictable cycle times The PVD‑coated AH725 grade delivers a balance of toughness and wear resistance, making the insert particularly suited for varying production runs where material mix is common. The PVD coating reduces flank wear and extends usable life under intermittent cuts, which in turn improves overall process stability. By choosing a universal, fracture‑resistant grade, procurement benefits from fewer tool changes and simplified inventory management while machining both carbon and rostfreier Stahl components. Secure clamping and consistent geometry for repeatable accuracy The rhombic form with a central hole and a cylindrical bore plus single‑side countersink (40°–60°) provides reliable seating in ISO holders; this reduces micro‑movement and ensures repeatable cutting geometry. A defined 7° clearance and a 0.2 mm nose radius contribute to dimensional control and predictable tool engagement. For production environments where part tolerances and surface finish matter, that mechanical consistency translates directly into reduced rework and higher first‑pass yield. Effective chip control and surface quality with minimal setup effort The insert’s single‑sided chipbreaker is engineered for manageable chip formation across common turning operations. Proper chip control lowers the risk of workpiece damage and facilitates automated or semi‑automated handling downstream. In combination with the DCMT070202 geometry, the chipbreaker supports reliable surface finish with only modest cutting parameter adjustments, so cycle times remain efficient without intensive operator intervention. ISO compatibility and economical tooling strategy As an ISO‑norm insert, the item integrates with a wide range of holders and adaptors; match by form, clearance angle, tolerance class, clamping and thickness. The PVD‑coated carbide construction and universal grade reduce the need for multiple specialised inserts, supporting a leaner tooling inventory and lower running costs. This makes the insert a practical choice for job shops and production cells aiming to balance productivity with tooling economy. Contact Metav Werkzeuge for application matching or to request a brief compatibility check for holders and setups when specifying the DCMT070202 AH725 insert Technical Data Article number: 6865358 SKU: 6865358-Tungaloy Manufacturer article number: TUN6865358 Model series: ISO turning indexable inserts ISO designation: DCMT070202 Material: Carbide Grade: AH725 Coating: PVD Numbers / Core technical data Corner radius: 0.2 mm Clearance angle: 7° Leading angle: 55° Plate thickness: 2.38 mm Plate size: 07 Special features / Versions Plate form: rhombic Hole: cylindrical bore + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning Compatibility: ISO holders and bore‑clamp systems FAQ Is this insert suitable for stainless steels? Yes. The AH725 PVD‑coated carbide grade on the DCMT070202 insert is designed as a universal, fracture‑resistant grade suitable for machining steel and rostfreier Stahl, offering good process security across varied batches. Which holder features are required for correct seating? An ISO‑compatible holder matching the DCMT form, clearance angle, tolerance class, clamping and thickness is required to ensure correct seating and repeatable performance with this insert. What cutting tasks benefit most from this insert? The insert is optimised for general finishing and medium‑roughing in external and internal turning where a balance of tool life and resistance to chipping is required, particularly in mixed material production. How does the chipbreaker influence setup and surface finish? The single‑sided chipbreaker promotes predictable chip formation, helping to maintain surface quality with modest adjustments to feed and speed and reducing the likelihood of entangling or damaging chips. Can the insert reduce tooling inventory complexity? Yes. The universal AH725 grade and ISO DCMT format allow consolidation of inserts across several machining tasks, lowering the number of specialised grades required in stock. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070202 AH8005 Wendeplatten - Tungaloy
Take advantage of high wear resistance, stable chip control and precise geometry for consistent turning results; order the DCMT070202 AH8005 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 070202 AH8005 indexable insert for turning — Tungaloy A DCMT 070202 AH8005 indexable turning insert engineered for external and internal turning, offering a rhombic 55° geometry and single-sided chip control for stable machining. PVD-coated carbide grade AH8005 Rhombic ISO insert DCMT 070202, 55° geometry Single-sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Consistent performance with a wear-resistant grade The PVD-coated carbide grade AH8005 is designed for demanding turning tasks on heat-resistant alloys and harder materials. The PVD layer provides a protective barrier that improves wear resistance and thermal stability, which in turn helps to maintain cutting-edge integrity during prolonged cycles. For production environments where repeatability matters, this combination of grade and coating supports longer intervals between indexings and contributes to steady component quality. Precision geometry that improves surface finish and clamping The rhombic form with a 55° included angle and a 0.2 mm corner radius delivers a balance between edge strength and fine surface finish. A 7° clearance angle reduces rubbing while the 2.38 mm plate thickness ensures stable seating in the toolholder. The insert’s cylindrical hole with a 40°–60° countersink enables secure fixation and predictable positioning in standard ISO-compatible holders. These geometry choices reduce chatter and variation, resulting in fewer rejects and more predictable cycle times. Effective chip control for safer, cleaner machining Equipped with a single-sided chipbreaker, the insert channels chips reliably away from the cutting zone, which simplifies swarf management in both external and internal turning operations. Improved chip control reduces the risk of entanglement and tool damage, lowers machine downtime for cleaning and contributes to a safer working environment. The controlled chips also aid coolant flow and enhance the stability of interrupted cuts when present. Integration guidance and application scope As part of the ISO indexable insert system, this item integrates with matching external holders, boring bars, clamping sets and replacement screws. Selection of the correct chipbreaker and grade should reflect the workpiece material, the machining operation and the rigidity of the setup. For turning applications on tougher alloys or when higher process stability is required, choosing this PVD-coated carbide grade supports sustained productivity while maintaining dimensional consistency across batches. For demanding turning of heat-resistant alloys, choose Tungaloy grade AH8005 inserts — contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6775788 SKU: 6775788-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Intended use: Turning Data Included angle: 55° Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: 2.38 mm Size designation: 07 Special features Grade AH8005, PVD-coated carbide Rhombic plate form DCMT Single-sided chipbreaker Cylindrical hole plus single-side countersink (40°–60°) Compatible with ISO-standard holders Designed for external and internal turning FAQ Is this insert suitable for heat-resistant alloys? The AH8005 grade insert is specified for heat-resistant alloys; the PVD-coated carbide insert provides enhanced wear resistance for such materials. What does the 55° geometry mean for machining? A 55° rhombic geometry yields a compact cutting edge suited to external and internal turning where a balance between strength and accessibility is required. How is the insert secured in the holder? The insert features a cylindrical hole with a single-side countersink (40°–60°) for secure clamping in compatible toolholders. Which chip control can be expected from the insert? The single-sided chipbreaker promotes consistent chip formation and evacuation, reducing swarf buildup and improving process reliability. Can this insert be used for interrupted cuts? The robust geometry and PVD-coated carbides provide stability that is advantageous for interrupted cuts, assuming the overall setup rigidity is adequate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH8015 for sustained wear resistance and edge stability in the machining of heat-resistant alloys; the rhombic ISO geometry with a 0.2 mm corner radius and 7° relief ensures predictable cutting forces and consistent surface finish. Order directly via Metav Werkzeuge or contact the consultants for application-specific advice. DCMT 070202 AH8015 ISO turning insert — Tungaloy DCMT 070202 AH8015 is an ISO rhombic turning insert designed for general turning applications, engineered to balance wear resistance and cutting-edge stability for heat-resistant alloys. PVD-coated carbide AH8015 for heat-resistant alloys Rhombic ISO insert, size 07, radius 0.2 mm 7° relief and 55° geometry for stable cutting One-sided chipbreaker, countersunk hole Higher productivity through material and coating benefits The PVD-coated carbide grade AH8015 is formulated as a first choice for the general machining of heat-resistant alloys, offering a balanced compromise between wear resistance and edge strength. This balance enables moderately higher cutting speeds and extends tool life compared with uncoated grades, translating into reduced tool-change frequency and improved process economics. The combination of coating technology and carbide substrate helps to maintain a consistent edge geometry under thermal load, which is particularly advantageous where stability of cut and component tolerances are critical. Predictable fit and wide applicability for turning operations As an ISO-standard rhombic insert, the plate is compatible with a broad range of external holders and boring bars; compatibility is determined by form, relief angle, tolerance class, fixation method, size and thickness. The rhombic shape and 55° included angle support both external and internal turning operations, while the one-sided chipbreaker improves chip formation and evacuation in interrupted and continuous cuts. The insert’s hole arrangement — cylindrical hole with a single-sided countersink (40°–60°) — supports secure clamping and repeatable seating in standard clamping systems, reducing the risk of misalignment and enabling consistent machining results. Operational reliability and handling advantages on the shop floor Key geometry values such as the 0.2 mm corner radius and the plate thickness of 2.38 mm contribute to edge robustness and enhanced surface finish when machining thin-walled or heat-resistant components. The 7° relief angle reduces rubbing at the flank, lowering cutting temperature and vibration under many turning conditions. Chip control benefits from the dedicated chipbreaker geometry, which aids in forming manageable chips and reduces tool nose wear. Together, these characteristics support a reliable, repeatable process that is easy to integrate into existing tool inventories and production routines. For application matching, stock enquiries or specification advice for the Tungaloy AH8015 grade, contact Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 — to confirm the optimal holder and cutting data for the planned operation Technical data Manufacturer article number: 6825755 SKU: 6825755-Tungaloy Manufacturer SKU: TUN6825755 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Size: 07 Corner radius: 0.2 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 55° Hole style: cylindrical + single-sided countersink (40°–60°) Special features Material: carbide (PVD-coated, AH8015) One-sided chipbreaker Rhombic plate form ISO designation: DCMT070202 Application: turning (external and internal) With hole (countersunk) FAQ What materials is this insert intended for? The DCMT 070202 AH8015 insert is optimised for the general machining of heat-resistant alloys while also providing balanced performance across a broad range of materials when appropriate cutting data are used. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixation and plate thickness; the rhombic ISO geometry and the cylindrical hole with countersink ensure secure seating in standard clamping systems designed for DCMT-type inserts. How does the AH8015 grade affect tool life and cutting speed? The PVD-coated AH8015 grade combines wear resistance and edge stability to permit stable cutting at elevated speeds compared with uncoated grades, often resulting in longer tool life and fewer tool changes in production environments. What benefit does the one-sided chipbreaker provide? The one-sided chipbreaker improves chip formation and evacuation, promoting safer chip control and reducing risk of entanglement or build-up, which supports consistent surface finish and tool performance. Is this insert suitable for internal boring as well as external turning? Yes; the rhombic shape and 55° geometry make the insert suitable for both external and internal turning operations when used with the corresponding holders and correct cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 wear resistance, a stable 55° rhombic geometry, and secure ISO-compatible fastening for reliable turning performance; order or request advice via Metav Werkzeuge. DCMT 070202 AH8015 indexable turning insert — ISO 07 rhombic insert for turning, PVD-coated carbide by Tungaloy A DCMT070202 AH8015 indexable turning insert designed for general external and internal turning in ISO format, balancing wear resistance and cutting-edge stability for machining heat‑resistant alloys. PVD-coated carbide AH8015 for heat‑resistant alloys Rhombic ISO 07 insert with 55° geometry 0.2 mm corner radius and 7° clearance angle Cylindrical hole with 40°–60° countersink Longer tool life and consistent edge performance for heat‑resistant alloys The PVD-coated AH8015 grade is formulated as a balanced, general‑purpose solution for machining heat‑resistant alloys, combining wear resistance with edge stability. This chemistry and coating strategy reduces flank wear under elevated temperatures, which leads to fewer insert changes and more predictable cycle times. The result is improved process efficiency and reduced unplanned downtime, especially in series production where consistent tool life is critical. Secure clamping and ISO compatibility that stabilises the cutting process Compatibility with the clamping system is determined by form, clearance angle, tolerance class, fastening type, size and thickness; the rhombic ISO 07 format, 55° geometry and 2.38 mm thickness of this insert ensure a reliable fit in standard ISO holders. The cylindrical hole with a one‑sided 40°–60° countersink enables positive seating and repeatable torque control during mounting, which in turn reduces vibration and improves surface finish in both external and internal turning operations. Controlled chip flow and fine finishing with defined edge geometry A 0.2 mm corner radius combined with a single‑sided chipbreaker supports controlled chip formation and precise finishing passes. The small radius is suitable for fine turning and near‑finish work, while the chipbreaker design assists in evacuating swarf efficiently, lowering the risk of built‑up edge and improving surface integrity. Together, these features provide measurable advantages in process reliability and part consistency when machining demanding alloys. For enquiries on application compatibility or to procure Tungaloy PVD‑coated AH8015 inserts, contact Metav Werkzeuge for technical guidance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6775789 SKU: 6775789-Tungaloy Manufacturer SKU: TUN6775789 Manufacturer: Tungaloy Core measurements ISO designation: DCMT070202 Plate size: 07 Plate form: rhombic Included angle: 55° Plate thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.2 mm Special features Material: carbide Grade/coating: AH8015, PVD‑coated carbide Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) System composition: ISO indexable insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ Which materials is this insert best suited for? The AH8015 PVD‑coated carbide grade is primarily specified for heat‑resistant alloys and general turning tasks; the DCMT070202 insert is chosen where a balance of wear resistance and edge stability is required. What are the geometric and mounting details of the insert? The insert follows the ISO 07 format with a rhombic 55° geometry, a 2.38 mm thickness and a cylindrical hole with a 40°–60° countersink, designed for secure ISO‑standard clamping. How does the corner radius and chipbreaker affect finish quality? The 0.2 mm corner radius provides fine finishing capability, while the single‑sided chipbreaker promotes controlled chip flow, improving surface quality and reducing rework. Can this insert be used for both external and internal turning? Yes, the design and specifications permit use in both external and internal turning when the holder and process parameters are matched to the insert’s geometry and grade. Which product identifiers should be referenced when ordering? Refer to the designation DCMT070202 AH8015, the article number 6775789, or the SKU 6775789‑Tungaloy for accurate ordering and traceability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070202 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for heat-resistant alloys, precise geometry with a 0.2 mm corner radius and ISO compatibility for reliable turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for selection and mounting assistance. DCMT 070202 AH8015 turning indexable insert — Tungaloy The DCMT070202 AH8015 is an ISO rhombic turning indexable insert designed for external and internal turning of heat-resistant alloys and similar demanding materials. PVD-coated carbide grade AH8015 Optimised for high-temperature alloys Rhombic 07 form, 55° cutting angle Single-sided chipbreaker, hole with countersink Engineered for consistent performance with heat-resistant alloys The insert is manufactured from carbide with a PVD coating and the AH8015 grade, delivering a balance between wear resistance and edge stability for the machining of high-temperature alloys. The tool geometry — rhombic 07 shape combined with a 55° cutting angle — provides stable cutting forces and predictable tool life. For production environments where material strength and heat build-up are factors, this geometry reduces flank wear and helps maintain consistent surface finish over longer runs. Compatibility with standard ISO holders ensures integration into established turning systems without special adapters. Precise geometry and chip control for productive turning With a 0.2 mm corner radius and 7° clearance, the insert supports controlled engagement and robust edge strength for light to medium interrupted cuts. The single-sided chipbreaker is tuned to assist in chip formation and evacuation when machining tougher materials, which lowers the risk of built-up edge and improves process security. The 2.38 mm plate thickness contributes to rigidity at the cutting zone, reducing vibration and enabling more predictable feed and speed windows. For shops seeking efficiency, this combination of geometry and chip control reduces rework and increases cycle-to-cycle reliability. Practical compatibility, handling and application notes This ISO-format insert is supplied with a hole and a cylindrical hole plus one-sided countersink (40°–60°) to suit common clamping systems; secure fastening and correct seat geometry are essential for repeatable results. Selection of the matching external holder or boring bar should consider form, clearance, tolerance class, fastening method, size and thickness to ensure correct fit. Where operators require support selecting the correct holder or optimising cutting data for specific alloys, technical consultation is available to translate process requirements into cutting parameters that match the insert’s strengths. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice on Tungaloy PVD-coated carbide turning inserts and assistance with holder compatibility. Technical data Article number: 6825787 Manufacturer SKU: TUN6825787 SKU: 6825787-Tungaloy Material: Carbide Coating: PVD Grade: AH8015 Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 55° Hole: with hole Special features Rhombic 07 plate form Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) ISO-conforming turning insert Optimised for high-temperature alloys Balanced wear resistance and edge stability FAQ Which materials is this insert best suited for? The DCMT070202 AH8015 insert is optimised for high-temperature alloys and general applications where a balance of wear resistance and edge stability is required; the AH8015 grade and PVD coating support these use cases. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometries and is intended for use with compatible external holders or boring bars that match the form, clearance, tolerance class, fastening and size. What are the key geometry values to note for process planning? Important values are the 55° cutting angle, 7° clearance, 0.2 mm corner radius and 2.38 mm thickness; these inform holder selection and recommended cutting parameters. Can the insert be used for internal turning as well as external turning? The design and the rhombic 07 form allow use in both external and internal turning operations when paired with the correct holder and setup. Which SKU should be referenced when ordering or enquiring? Reference article number 6825787 or manufacturer SKU TUN6825787 when requesting the DCMT070202 AH8015 insert from Metav Werkzeuge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 AT9530 Wendeplatten - Tungaloy
Product data conflict detected: one data entry specifies the cutting material as "coated cermet" while another indicates "carbide" as the material. Because of this contradiction, a reliable product description cannot be generated. Please verify and correct the material information so an accurate, complete product description can be provided, ensuring consistency across all data entries to avoid confusion or errors in product representation, as accurate material details are essential for proper classification, customer understanding, and operational efficiency, particularly when dealing with technical specifications that directly impact product performance, quality, and suitability for specific applications or manufacturing processes.
DCMT 070202 DX120 Wendeplatten - Tungaloy
Take advantage of DX120 PCD performance and the precise 0.2 mm corner radius for extended tool life and reliable high-speed aluminium turning; order the DCMT070202 DX120 insert directly via Metav Werkzeuge or consult the team for holder compatibility and delivery options. DCMT 070202 DX120 — ISO Turning Insert (PCD), Tungaloy DCMT070202 DX120 is an ISO‑standard rhombic turning insert for high‑speed machining of aluminium and other non‑ferrous materials, designed for use in ISO turning holders. High‑speed PCD grade DX120 Rhombic 07 form, 0.2 mm corner radius ISO compatibility with standard turning holders Cylindrical hole with 40°–60° countersink Optimised for high cutting speeds and long tool life The DX120 polychrystalline diamond (PCD) grade provides exceptionally low wear when machining aluminium and abrasive non‑metals, enabling high cutting speeds and extended intervals between indexings. The PCD cutting edge resists micro‑abrasion and maintains sharpness under thermal and mechanical load, which translates into consistent surface finish and fewer unplanned insert changes. This results in reduced cycle times and improved uptime for production runs where speed and longevity are decisive. Predictable geometry for accurate finishing and repeatability A defined 0.2 mm corner radius and 7° clearance guarantee stable cutting conditions and repeatable part geometry, supporting predictable toolpaths and dimensional control. The rhombic 07 form offers a balanced cutting edge for both external and internal turning, while the single‑sided chipbreaker promotes reliable chip control with typical aluminium alloys. These geometric constants simplify process windows and make tool selection and parameter setting more straightforward for machining departments seeking reproducible quality. System compatibility and efficient handling in the toolroom The insert follows ISO specifications, identified as DCMT070202, and is compatible with ISO turning holders where form, clearance angle, tolerance class, clamping method, size and thickness match. The insert's cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and repeatable seating, reducing the risk of misalignment during indexing. As an indexable cutting solution, the component integrates into a standard system build‑up—insert, holder, shim/adapter, and clamping hardware—facilitating fast changeovers and stock management for production environments. For demanding high‑speed aluminium machining, request supply and technical advice for the DCMT070202 DX120 insert from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and delivery options. Technical data Article number: 6822157 SKU: 6822157-Tungaloy Manufacturer SKU: TUN6822157 Core specifications ISO designation: DCMT070202 Plate size: 07 Plate thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.2 mm Wedge/lead angle: 55° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Materials & special features Insert material: Hartmetall Cutting material: polykristalliner Diamant (PCD) Grade: DX120 Chipbreaker: single‑sided Typical application: Turning (external and internal) Suited for: Aluminium, non‑ferrous metals and abrasive non‑metals Model series: ISO turning indexable inserts FAQ What materials is this insert designed for? The DCMT070202 DX120 insert from Tungaloy is designed primarily for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, utilising the DX120 PCD grade for extended wear resistance. Can the insert be used in standard ISO turning holders? Yes, the DCMT070202 follows ISO dimensions and fits ISO turning holders that match the insert's form, clearance angle, tolerance class, clamping method, size and thickness. How does the 0.2 mm corner radius affect part finish? A 0.2 mm corner radius provides a stable cutting edge that improves edge strength while maintaining a fine surface finish, making it suitable where both durability and dimensional control are required. Is the insert suitable for internal turning operations? The rhombic 07 form and single‑sided chipbreaker permit both external and internal turning applications when mounted in appropriately sized holders. What is the correct way to secure the insert in the holder? Use a compatible ISO holder with the corresponding mounting pocket, shim or adapter and the correct clamping screw; the insert's cylindrical hole and countersink ensure repeatable seating and secure clamping. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070202 GH730 Wendeplatten - Tungaloy
Combining the GH730 grade's wear resistance, a 0.2 mm corner radius and secure 40°–60° countersunk clamping, this insert delivers consistent turning performance and extended tool life. Order the DCMT070202 GH730 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070202 GH730 Tungaloy indexable insert for turning — rhombic ISO insert, 0.2 mm corner radius The DCMT070202 GH730 is an ISO‑standard rhombic indexable insert designed for external and internal turning; its geometry, relief and thickness must match the chosen holder for reliable clamping and predictable cutting behaviour. ISO-standard rhombic geometry GH730 Tungaloy grade – wear-resistant 0.2 mm corner radius for fine surface finish Central hole with 40°–60° countersink for clamp Reliable cutting performance for productive turning The combination of the GH730 composition from Tungaloy and a carbide substrate provides a measured balance of wear resistance and toughness, supporting sustained cutting cycles under typical turning conditions. The single‑sided chipbreaker offers controlled chip formation for many basic turning tasks; the modest corner radius helps to produce a consistent surface finish while reducing edge chipping risk. These technical choices reduce unplanned tool changes and contribute directly to higher process stability and lower unit costs per component. Precise fitting and secure clamping reduce setup time Designed as an ISO insert in size 07 with a rhombic 55° included angle, the geometry of the plate must be matched to the holder by form, relief, tolerance class, attachment and thickness for correct fit. The plate thickness of 2.38 mm and a 7° relief angle ensure compatibility with a wide range of ISO external holders, while the central cylindrical hole with one‑sided countersink (40°–60°) gives secure mechanical clamping and consistent seating. This combination simplifies replacement, lowers positioning error and improves repeatability when multiple edges are indexed. Practical application advice to optimise throughput As an indexable insert, the DCMT070202 is intended for general turning tasks — external and internal operations where an economical, reproducible cutting edge is required. Multiple indexing extends usable life and keeps spindle downtime to a minimum. For best results, pair the insert with a holder that matches the plate form and stability of the setup, and select a matching chipbreaker and cutting data tuned to the workpiece material and rigidity of the machine. The measured geometry and GH730 grade make this insert a pragmatic choice where reliable edge life and consistent surface quality are priorities. Contact Metav Werkzeuge for application advice and to order the Tungaloy DCMT070202 GH730 indexable inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6820979 Manufacturer SKU: TUN6820979 Model series: ISO turning indexable inserts WPL ISO code: 070202 Facts Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Size: 07 Special features Material: carbide Grade: GH730 (Tungaloy) Shape: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ Which operations is this insert designed for? The DCMT070202 GH730 Tungaloy indexable insert is designed primarily for external and internal turning operations and is compatible with ISO‑type holders when form, thickness and clamping match. How is the insert clamped in the holder? Clamping is achieved via the central cylindrical hole with a one‑sided countersink (40°–60°); the DCMT070202 requires the matching screw, clamp or seat geometry in the holder for secure fixation. What are the key dimensions to consider for holder compatibility? Important dimensions are thickness 2.38 mm, corner radius 0.2 mm, size 07, relief angle 7° and the 55° rhombic geometry; these determine compatibility with ISO holders and clamping systems. How should the chipbreaker and grade be chosen? Select the chipbreaker and grade to suit the workpiece material, machining type and machine stability; the GH730 grade in this insert emphasises a balance of wear resistance and toughness for general turning. Can the insert be indexed to use multiple cutting edges? Yes, as an indexable insert the DCMT070202 can be rotated to present fresh edges, extending usable tool life and reducing replacement frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com