DCMT 070204 NS9530 Wendeplatten - Tungaloy
Benefit from precision finishing and reduced cutting forces thanks to the uncoated cermet NS9530 and the rhombic 55° geometry; reliable clamping and ISO compatibility ensure stable, repeatable turning results—order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT 070204 NS9530 — Turning insert for finishing (Tungaloy) The DCMT070204 NS9530 is an ISO rhombic turning insert designed for finishing operations in turning, offering a sharp cutting edge, low cutting forces and a focus on high surface quality. Uncoated cermet NS9530 finishing grade Sharp cutting edge for superior surface finish Rhombic 55° geometry with 7° clearance Cylindrical hole with single-side countersink Achieve fine surfaces with lower cutting forces The uncoated cermet composition of this grade delivers a sharp cutting edge that reduces friction and promotes continuous chip flow, which directly translates into low cutting forces and improved machining stability. Reduced forces mean less vibration and a more consistent tool path, resulting in a high surface finish on turned components. The insert’s construction supports small depths of cut and finishing passes where dimensional accuracy and visual quality are priorities. Secure locating and straightforward holder compatibility ISO-standard geometry and the rhombic shape with a 55° approach angle ensure the insert seats reliably in common external and internal holders. The cylindrical hole with single-side countersink (40°–60°) provides secure clamping and repeatable seating, while the 7° clearance protects the flank face during entry and exit. These design choices simplify tool changeover and reduce setup time, supporting consistent cycle times and fewer rejects in production. Optimised grade for continuous finishing and small depths of cut The NS9530 finishing grade is formulated for continuous cutting of Stahl where sharpness and low cutting forces are required. The combination of fine edge geometry and the insert’s nominal corner radius 0.4 mm makes it particularly suited to light-duty finishing and producing tight surface tolerances. In practice, this grade helps to maintain dimension with minimal burr formation, making it a cost-effective option for high-volume finishing or precision one-off components. Practical benefits for workshop efficiency Using an indexable insert with ISO conformity streamlines inventory and holder compatibility across different machines. The insert’s 2.38 mm thickness and compact 07 size balance rigidity and accessibility in confined setups. The single-side chipbreaker supports predictable chip formation in continuous cuts, reducing the need for secondary finishing and lowering overall processing time. Technical advisors can recommend the optimal holder and cutting parameters for specific workpiece materials and machine rigidity. Contact Metav Werkzeuge for availability, application advice and to discuss the DCMT070204 NS9530 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998484 Manufacturer SKU: TUN6998484 SKU: 6998484-Tungaloy Model series: ISO-indexable turning inserts Material: carbide Core dimensions Size: 07 Thickness: 2.38 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 7° Special features Uncoated cermet finishing grade NS9530 Rhombic plate form, ISO geometry Cylindrical hole with single-side countersink (40°–60°) Single-side chipbreaker Application: turning (external and internal) Compatible with ISO-standard external holders and boring bars FAQ What materials is this insert suitable for? The NS9530 finishing grade is designed primarily for Stahl and is optimised for continuous finishing cuts where a sharp edge and low cutting forces are required; the DCMT070204 Tungaloy insert performs well in these conditions. How should the insert be clamped in the holder? Use a compatible ISO rhombic insert holder that accepts DCMT 07-sized plates; the cylindrical hole with a single-side countersink on the DCMT070204 ensures secure seating and repeatable clamping. What is the corner radius and how does it affect finish? The insert has a 0.4 mm corner radius, which supports fine surface finishes and accurate profiles during light finishing passes. Can this insert be used for interrupted cuts? The NS9530 grade is formulated for continuous cutting and fine finishing; for heavily interrupted cuts a more robust grade is recommended. Which SKU corresponds to this item? This item is listed as 6998484-Tungaloy and has the manufacturer article number 6998484. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade insert that combines NS9530 uncoated cermet performance, low cutting forces and ISO compatibility for consistent surface quality and predictable setups; order through Metav Werkzeuge or request application advice from our specialists. DCMT070204 NS9530 Turning insert by Tungaloy — uncoated cermet finishing grade DCMT070204 NS9530 is a rhombic ISO turning insert optimised for fine finishing of steel components in both external and internal turning applications. ISO rhombic DCMT form for universal turning Uncoated cermet NS9530 for fine finishing Low cutting forces for vibration control Cylindrical hole with 40°–60° countersink Achieve superior surface quality with a finishing-grade cutting edge The NS9530 specification denotes an uncoated cermet designed specifically as a finishing grade for steel, offering a sharp cutting edge and reduced cutting forces. This composition produces a finer microgeometry on the insert edge than standard carbide grades, which directly improves the surface finish on the workpiece and lowers the energy required per cut. For continuous cutting and small depths of cut the result is a noticeable reduction in chatter and a more consistent part-to-part surface quality, making this insert suitable where tight finish tolerances are required. Predictable setup and secure clamping for repeatable turning Shaped to the ISO rhombic geometry, the insert’s form and dimensions ensure compatibility with standard holders when the seat, tolerance class and fastening match the plate size and thickness. The ISO-standard geometry simplifies tool selection and reduces setup time on the machine. Key geometric values such as the 7° relief, 0.4 mm corner radius and 2.38 mm thickness influence cutting behaviour: the relief angle controls flank contact, the corner radius defines profile rounding and the thickness adds rigidity in the clamped state, all contributing to stable clamping and repeatable tool life under comparable cutting conditions. Practical application guidance and process benefits Designed for turning of steel, this insert features a single-sided chipbreaker that is best suited to continuous cuts and small feeds where a fine, regular chip is desirable. The rhombic plate with a cylindrical hole and one-sided countersink (40°–60°) provides reliable location and positive clamping in compatible toolholders. Choosing this grade and chipbreaker combination helps to reduce secondary operations by delivering acceptable finish right off the lathe and to extend the intervals between index changes, improving overall process throughput without compromising component quality. For tailored application advice on the DCMT070204 NS9530 insert (TUN6998472) or to confirm suitability for a specific steel grade and turning condition, contact Metav Werkzeuge quoting the article number for expert support and availability. Technical Data Article number: 6998472 SKU: 6998472-Tungaloy Manufacturer SKU: TUN6998472 Designation: DCMT070204 NS9530 Tungaloy-Wendeplatte Core data Geometry angle: 55° Corner radius: 0.4 mm Relief angle: 7° Thickness: 2.38 mm Size: 07 Plate form: rhombic Special features Grade: NS9530 (uncoated cermet) Cutting material type: uncoated cermet Substrate material: cemented carbide Chipbreaker: single-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert intended for? The DCMT070204 NS9530 insert is specified as a finishing-grade for steel; the NS9530 composition targets improved surface finish and low cutting forces when turning steel components. Can this insert be used in standard ISO holders? Yes, the insert follows ISO rhombic geometry; compatibility with a holder depends on matching form, relief angle, tolerance class, fastening method, size and thickness. Which cutting conditions suit the NS9530 grade best? NS9530 performs best in continuous cutting operations with small depths of cut and moderate feeds, where a sharp edge and low cutting force deliver the desired surface quality. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert produces regular, controllable chips in finishing cuts, aiding chip evacuation and reducing the risk of workpiece surface damage. Is the insert suitable for internal turning as well as external turning? Yes, the geometry and thin profile of the rhombic DCMT insert make it appropriate for both external and internal turning tasks when used with a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
The combination of an uncoated cermet cutting grade and a precise ISO geometry ensures low cutting forces and an excellent surface finish for finishing turning operations, while the standard rhombic form and keyed hole enable reliable clamping and quick insert changes. Order the inserts or consult Metav Werkzeuge for application advice and delivery options. DCMT 070204 NS9530 — Turning insert, uncoated cermet, Tungaloy DCMT070204 NS9530 Tungaloy insert for ISO-form turning applications, optimised for finishing cuts on Stahl with a single-sided chipbreaker and a narrow corner radius. Uncoated cermet grade NS9530 Designed for finishing turning Rhombic ISO shape 07, 55° cutting angle 0.4 mm corner radius, 7° clearance High-precision finishing with low cutting forces The NS9530 uncoated cermet grade is developed for finishing cuts on Stahl, delivering a combination of a sharp cutting edge and reduced friction that supports consistently high surface quality. The narrow 0.4 mm corner radius and the geometry designed for continuous cuts reduce vibration and cutting forces, which in turn minimises workpiece distortion and helps achieve reproducible part tolerances. This makes the insert particularly suitable for light- to medium-duty finishing where surface integrity and dimensional accuracy are decisive. Reliable clamping and straightforward holder compatibility Designed to ISO plate dimensions, the rhombic 07 format and the central hole ensure compatibility with standard ISO external inserts and boring bars. The plate thickness of 2.38 mm and the cylindrical hole with a one-sided countersink (40°–60°) provide secure seating and repeatable clamping behaviour. Because compatibility depends on form, free angle, tolerance class, fastening method, size and thickness, the standardised geometry simplifies insert selection and shortens setup times in production environments, supporting efficient changeover and lower downtime. Controlled chip formation and consistent surface integrity The single-sided chipbreaker combined with the uncoated cermet composition promotes fine, predictable chip formation during finishing passes and small depths of cut. The material pairing—cermet cutting composition on a robust backing—supports a sharp edge that resists adhesion and provides a high-quality surface finish even at continuous cutting conditions. For turning operations where low cutting forces and excellent part appearance are priorities, this solution reduces the need for secondary finishing and enhances process stability. For advice on integrating Tungaloy DCMT 070204 NS9530 inserts into current machining processes or to request stock and delivery via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation. Technical Data Article number: 6998465 Manufacturer SKU: TUN6998465 SKU: 6998465-Tungaloy Model series: ISO-Drehwendeschneidplatten Grade: NS9530 Facts Cutting angle: 55° Clearance angle: 7° Thickness: 2.38 mm Corner radius: 0.4 mm ISO designation: 070204 Manufacturer part no.: 6998465 Special features Rhombic plate, size 07 With hole: cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Uncoated cermet cutting material Material: Hartmetall Application: Turning (finishing) Compatibility: ISO clamping; holder dependent on form and tolerance FAQ What types of operations is this insert intended for? The DCMT070204 NS9530 insert is intended for finishing turning operations, offering a sharp edge and low cutting forces suitable for continuous cuts on Stahl. Is the cutting grade coated or uncoated? This insert uses an uncoated cermet grade (NS9530), which prioritises edge sharpness and surface finish in finishing applications. Which holder features are required for correct mounting? Correct mounting requires an ISO-compatible holder matching the plate form, free angle and thickness; the DCMT070204 uses a cylindrical hole with a one-sided countersink for positive clamping. What surface quality can be expected with this insert? When used for the recommended finishing parameters, the NS9530 grade promotes a high surface finish due to its sharp edge and controlled chip formation. How does the corner radius influence performance? The 0.4 mm corner radius reduces cutting forces and helps to achieve fine surface results in small-depth finishing cuts while maintaining dimensional accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected for the item labelled DCMT070204 NS9530 Tungaloy insert. The supplied specifications indicate the cutting material both as a carbide-type material and as an uncoated cermet grade; these are distinct classes and cannot be treated interchangeably for technical descriptions or application guidance. This contradiction prevents a reliable, standards-compliant product text being generated. Please clarify whether the actual cutting material is a cermet grade NS9530 or a cemented carbide substrate, and confirm any substrate, coating or layer structure if applicable. Supplying the original manufacturer datasheet or a corrected material designation will allow the immediate creation of a complete, accurate product description and technical data sheet. For support in resolving this discrepancy, contact Metav Werkzeuge at info@metav-werkzeuge.com or by telephone on +49 2822 7131930.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 finishing grade and the sharp 0.4 mm corner radius for consistently improved surface quality and low cutting forces. Order the DCMT070204 NS9530 insert directly via Metav Werkzeuge or consult our specialists for compatibility and process advice. DCMT070204 NS9530 indexable turning insert — uncoated cermet, 7° clearance (Tungaloy) A DCMT070204 NS9530 indexable turning insert designed for fine finishing of steel in external and internal turning, offering a sharp cutting edge and low cutting forces. Uncoated cermet for fine finishing Low cutting forces, sharp cutting edge ISO rhombic 07 shape, 7° clearance Cylindrical hole with 40°–60° countersink Superior surface quality for finishing operations The NS9530 grade is an uncoated cermet intended as a finishing mix for steel, providing a sharp cutting edge and reduced built-up edge compared with many coated grades. This results in a better surface finish under continuous cutting conditions and when using small depths of cut. The 0.4 mm corner radius supports fine profile definition and smooth transitions, while the inherent hardness and edge stability of cermet help to keep cutting forces low, which in turn reduces vibration and the risk of chatter during light finishing passes. ISO compatibility and secure seating for predictable results Designed to the ISO designation DCMT070204, the insert uses a rhombic (07) geometry and a nominal engagement angle of 55°, ensuring broad compatibility with standard ISO turning holders. The 2.38 mm thickness and the 7° clearance are decisive for correct seating and cutting geometry; compatibility to a given holder depends on form, clearance angle, tolerance class, fastening, size and thickness. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) for secure mechanical location and positive clamping in a suitable pocket with the correct clamping set and screw. Machining benefits and typical applications As a finishing grade for steel, this insert excels on continuous cuts and small feed-depth combinations where a fine surface is the primary objective. The single-sided chipbreaker supports predictable chip formation for finishing passes and contributes to stability in many set-ups. Because the grade aims to minimise plastic deformation at the cutting edge, it is particularly suitable where low cutting forces and a high surface integrity are required, for both external and internal turning tasks that prioritise dimensional control and surface quality. Practical selection and handling guidance Select the NS9530 finishing grade when the priority is surface quality rather than heavy material removal. Match the chipbreaker style to the workpiece material and the clamping stability of the set-up; the single-sided breaker is optimised for finishing and steady feeds. Ensure the insert pocket is clean, the seating surface undamaged and the correct screw and clamping set are used to achieve repeatable positional accuracy. Regular inspection of the cutting edge and adherence to recommended torque values will help maintain consistent results across production batches. Contact Metav Werkzeuge for tailored recommendations on Tungaloy finishing inserts or for assistance matching holders and clamping sets — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998618 Manufacturer SKU: TUN6998618 Seller SKU: 6998618-Tungaloy Model series: ISO turning indexable inserts Facts Grade: NS9530 Cutting material: uncoated cermet Shape: rhombic (07) Size: 07 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.4 mm Nominal angle: 55° Special features Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Material: cemented carbide ISO designation: DCMT070204 Wedge form: DCMT FAQ Which materials is this insert intended for? The DCMT070204 NS9530 insert is a finishing grade specifically formulated for steel, providing a sharp edge and low cutting forces for improved surface integrity. What chip control can be expected from this geometry? The single-sided chipbreaker on this Tungaloy insert offers controlled chip formation suited to finishing passes and steady feeds, improving stability during light cuts. How is the insert secured in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) and is clamped into an ISO-compatible pocket; correct clamping sets and screws must be used to ensure reliable seating of the DCMT070204 NS9530. Which holder characteristics ensure compatibility? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic 07 format and 2.38 mm thickness require an ISO holder pocket matching these dimensions. What does the 0.4 mm corner radius affect in practice? A 0.4 mm corner radius offers a balance between fine surface finish and edge strength, enabling precise profile definition on finishing passes with less tendency for edge breakdown. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
The uncoated NS9530 cermet grade combined with a 0.4 mm nose radius and a sharp cutting edge yields excellent surface quality and low cutting forces in finishing turning operations. Order the DCMT070204 NS9530 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for specific application advice. DCMT070204 NS9530 Tungaloy indexable insert — uncoated cermet finishing grade A DCMT070204 NS9530 Tungaloy indexable insert designed for finishing turning on steel, offering a rhombic 55° geometry and a 0.4 mm nose radius for superior surface finish Uncoated cermet NS9530 for finishing Sharp cutting edge, low cutting forces Rhombic 55° geometry, 0.4 mm nose radius ISO-series insert, cylindrical hole with countersink Precision finishing with an uncoated cermet for steel components The uncoated cermet NS9530 is engineered as a finishing grade for turning steel, combining a finely honed cutting edge with material properties that reduce edge deformation. This results in lower cutting forces and consistently improved surface finish on continuous cuts and small depths of cut. Cermet comprises a mix of ceramic and metallic phases that offers high wear resistance and thermal stability; in an uncoated form it promotes excellent initial sharpness, which is particularly beneficial for delicate finishing passes where surface integrity is critical. Predictable clamping and easy integration into ISO turning systems Designed to the ISO DCMT070204 form, the insert features a rhombic 55° profile and a 0.4 mm nose radius, with a plate thickness of 2.38 mm and a cylindrical hole plus single-sided countersink (40°–60°). Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening and plate dimensions; the ISO conformity ensures reliable seating and repeatable indexing in suitable external holders or boring bars. The one-sided chipbreaker and standard hole format simplify toolroom stocking and reduce setup deviations, supporting steady cycle times and predictable tool performance. Process stability and application advantages in turning When employed for external and internal turning, the insert’s sharp edge geometry and cermet substrate produce a fine surface texture while keeping cutting forces low, which in turn reduces vibration and improves dimensional stability of the workpiece. The single-sided chipbreaker promotes controlled chip formation for finishing feeds, and the insert’s design suits stable turning conditions with small depths of cut. For applications requiring consistent surface quality and tight tolerances, this insert provides an economical route to improved part finish without additional machining steps. For precision finishing with the Tungaloy NS9530 DCMT070204 insert, contact Metav Werkzeuge for application recommendations and quick supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6945242 Manufacturer SKU: TUN6945242 Brand: Tungaloy Model series: ISO turning indexable inserts Type designation: DCMT070204 Facts Nose radius: 0.4 mm Included angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Size: 07 Special features Material: carbide substrate with uncoated cermet grade NS9530 Application: turning (external and internal) Chipformer: one-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Typical use: finishing with continuous cuts and small depths of cut FAQ What materials is this insert intended for? The DCMT070204 NS9530 insert is specified as a finishing grade for steel, using an uncoated cermet structure to achieve high surface quality. Is the insert compatible with ISO turning holders? Yes, the DCMT070204 form is ISO-standardised; compatibility depends on matching form, clearance angle (7°), tolerance class, fastening and thickness in the chosen holder. Which machining conditions suit the NS9530 grade best? The NS9530 grade is optimised for continuous cutting and small depths of cut, where a sharp edge and low cutting forces deliver superior surface finishes. How does the 0.4 mm radius affect part quality? A 0.4 mm nose radius balances edge strength with fine surface generation, helping to produce accurate profiles and improved roughness values on finishing passes. Does the insert offer controlled chip formation? The single-sided chipbreaker on this insert promotes controlled chip flow for finishing feeds, improving surface consistency during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing with the NS9530 uncoated cermet grade and a 0.4 mm nose radius for low cutting forces and superior surface quality; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DCMT 070204 NS9530 Tungaloy turning insert — rhombic ISO finishing insert, 0.4 mm radius The DCMT070204 NS9530 is an ISO‑standard rhombic turning insert intended for external and internal turning, optimised as a finishing grade for steel with a sharp cutting edge and low cutting forces. ISO rhombic turning insert, DCMT form Uncoated cermet NS9530 finishing grade 0.4 mm nose radius for fine surface finish Cylindrical hole with single-sided countersink High‑precision finishing with low cutting forces The DCMT070204 NS9530 insert is designed as a finishing solution for steel, combining a sharp cutting edge with the uncoated cermet NS9530 composition to reduce cutting forces and improve surface integrity. The material choice and geometry make the insert particularly suitable for continuous cuts and small depths of cut, where vibration is limited and surface quality is paramount. For shops aiming to reduce subsequent polishing or grinding, this finishing grade helps deliver consistent part quality and reduces rework time. Reliable fit and secure clamping for continuous production Compatibility with the toolholder depends on the insert’s form, tolerance class, clearance geometry and mounting features. The ISO-standard form and the rhombic plate shape ensure predictable seating in matched holders, while the cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and repeatable indexing. This mechanical consistency supports stable cutting conditions and contributes to higher machine uptime through fewer tool‑related interruptions. Geometry that enhances surface quality and process stability A 0.4 mm nose radius paired with a 7° clearance angle and a 2.38 mm plate thickness provides a balance between rigidity and delicacy at the cutting edge. The modest radius yields a fine finish without excessive cutting forces, while the clearance geometry reduces rubbing and heat build‑up on the flank face. In practice, these features mean improved surface roughness values and steady performance across short production runs and small batch manufacture. Practical selection and application guidance Select the appropriate holder and mount based on workpiece material, required stability and the finishing orientation. The single-sided chipbreaker is tailored for finishing cuts in steel and performs best with stable setups for external and internal turning. Where interrupted cuts or heavy vibrations occur, consider a more robust grade or a different chip control geometry. For complex applications, referring to the grade’s behaviour under continuous cut conditions helps determine feeds and speeds that protect the edge while achieving the desired surface finish. Contact Metav Werkzeuge today for tailored application advice and to secure Tungaloy finishing inserts that combine excellent surface quality with low cutting forces Technical data Article number: 6945255 Manufacturer article number: 6945255 SKU: 6945255-Tungaloy Manufacturer SKU: TUN6945255 Model series: ISO-Drehwendeschneidplatten Designation: DCMT070204 NS9530 Tungaloy-Wendeplatte Facts Cutting angle: 55° Nose radius: 0.4 mm Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 07 Special features Rhombic plate form Uncoated cermet NS9530 finishing grade Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Intended application: turning (external and internal) FAQ What materials is this insert intended for? The DCMT070204 NS9530 insert is specified as a finishing grade for steel, delivering low cutting forces and improved surface quality when used in continuous cutting applications. Can the insert be used for internal turning as well as external turning? Yes, the geometry and hole configuration permit both external and internal turning where a finishing cut is required and the setup provides sufficient stability. What does the NS9530 grade offer compared with coated grades? The NS9530 uncoated cermet grade emphasises a sharp cutting edge and high surface quality for finishing; it is optimised for continuous cuts and small depths of cut rather than aggressive roughing operations. How does the 0.4 mm nose radius affect part finish and tool life? A 0.4 mm nose radius produces finer surface finishes at moderate feed rates and reduces peak forces on the cutting edge, but the radius should be matched to the feed and depth of cut to avoid excessive edge loading. Is the insert compatible with all DCMT holders? Compatibility depends on the holder’s compliance with ISO form, tolerance class, seat geometry and clamping method; the insert’s ISO designation and hole style enable use with matching holders that follow the same standards. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, low-force cutting geometry and ISO compatibility for predictable finishing results; order the inserts directly via Metav Werkzeuge or consult the team for application-specific recommendations. DCMT070204 NS9530 Tungaloy indexable insert for Turning — 55° rhombic, 0.4 mm radius A rhombic ISO indexable insert, DCMT070204 NS9530, designed for finishing turning of steel where low cutting forces and high surface quality are required. ISO rhombic insert DCMT070204, 55° Uncoated cermet grade NS9530 for finishing Sharp cutting edge with low cutting forces Cylindrical hole with single‑side countersink High-surface finishing with low cutting forces The uncoated cermet composition of the NS9530 grade is optimised for finishing operations on steel. As a specialised finishing grade, it delivers a sharp cutting edge and reduced cutting forces, which together lower machining vibrations and help achieve consistently finer surface finishes. Cermet materials combine ceramic hardness with metallic toughness; this balance improves dimensional stability in continuous cuts and supports small depths of cut typical for precision turning. The result is predictable part quality and fewer rework cycles. Geometry and system compatibility for reliable clamping The rhombic geometry with a 55° cutting angle and 0.4 mm corner radius provides a balance between profile definition and edge strength, while the 7° clearance angle minimises rubbing and heat build-up at the flank. The insert thickness of 2.38 mm and the ISO designation determine compatibility: holder form, clearance, tolerance class, fastening method, size and thickness must match the insert specification. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure clamping in ISO‑standard turning holders; a matching clamp set, underlay and replacement screws complete the system and ensure repeatable seating and torque transmission. Process efficiency: fewer interruptions, better finish Equipped with a one‑sided chipbreaker and a finishing‑oriented substrate, the insert promotes stable chip formation and unconstrained evacuation during continuous turning. These properties reduce the likelihood of built‑up edge and minimise surface irregularities, making the component particularly suitable for external and internal finishing passes. In practical terms, this leads to higher throughput with consistent part quality and longer intervals between tool changes. For integration into production, select a matching ISO outside holder or boring bar and observe recommended cutting parameters for cermet grades to exploit the full potential of the insert. For precision finishing with Tungaloy quality, request DCMT070204 NS9530 inserts from Metav Werkzeuge or contact the Metav Werkzeuge technical team for application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998479 Manufacturer SKU: TUN6998479 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: NS9530 Core dimensions Geometry: DCMT070204 (rhombic, 55°) Corner radius: 0.4 mm Clearance angle: 7° Thickness: 2.38 mm Insert size: 07 Design & features Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Coating: uncoated cermet Typical application: external and internal turning, finishing cuts FAQ Which materials are suitable for this insert? The DCMT070204 NS9530 insert is primarily intended for finishing on steel; the NS9530 uncoated cermet composition is optimised for continuous cutting with low cutting forces. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius on the DCMT070204 provides a fine profile edge that improves surface finish while maintaining adequate edge strength for finishing passes. What must be matched to ensure compatibility with a holder? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening type, size and thickness; the insert is designed for ISO‑standard holders with a cylindrical hole and single‑side countersink. Is this insert suitable for internal turning as well as external turning? Yes, the insert is designed for both external and internal turning operations when used with the appropriate ISO boring bar or holder and recommended cutting parameters for cermet grades. What benefits does the uncoated NS9530 grade offer compared with coated grades? The uncoated NS9530 cermet offers a very sharp initial cutting edge and reduced cutting forces, which benefits surface quality in finishing applications, particularly under continuous cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.4 mm corner radius for consistent finishes, and reliable clamping geometry to keep turning operations productive and predictable; order genuine inserts directly via Metav Werkzeuge or consult the technical team if guidance is required. DCMT070204 T5115 ISO Turning Insert for Cast Iron — Tungaloy DCMT070204 T5115 is an ISO-format indexable turning insert designed for external and internal turning of cast iron components, offering a balance of wear resistance and edge stability for industrial machining. CVD-coated carbide for improved wear resistance Optimised for cast iron turning applications Rhombic 07 shape with 7° clearance angle Central hole with cylindrical recess, 40°–60° countersink Precision fit and predictable clamping for routine production The insert is part of an ISO turning insert system where compatibility is defined by shape, 7° clearance angle, tolerance class, fastening method, size and thickness. This set-up delivers predictable seating in standard holders and repeatable tool geometry, reducing set-up time and variation between inserts. Clear, standardised dimensions mean that toolroom engineers and production planners can allocate inserts to existing ISO holders without trial-and-error, supporting uninterrupted turning cycles and consistent part quality. Coating and grade engineered for cast iron performance The T5115 grade combines a CVD-coated carbide substrate with a universal profile aimed at cast iron machining. The coating improves wear resistance while the substrate maintains a stable cutting edge, which helps sustain surface finish and dimensional accuracy under interrupted or continuous cuts. For operations where tool life and surface integrity are critical, this balance often results in fewer indexings and less scrap, providing a measurable productivity gain over uncoated or lower-grade alternatives. Geometry that controls chips and secures the insert With a 0.4 mm corner radius, single-sided chipbreaker and a rhombic 07 outline, the insert supports stable cutting forces and predictable chip formation on typical cast iron workpieces. The central hole with a cylindrical recess and one-sided countersink (40°–60°) provides secure clamping and repeatable seating in compatible toolholders. These features reduce vibration and protect the cutting edge, which contributes to improved tool life and cleaner parts straight from the lathe. Operational benefits and return on process stability Choosing this insert delivers tangible operational benefits: improved tool life, consistent surface finish and reduced machine downtime from fewer insert changes. The geometry and coating make it suitable for both roughing and finishing passes when matched with an appropriate holder and cutting data. Where process reliability and throughput matter most, integrating standardised ISO inserts like this one supports predictable cycle times and easier inventory management across the production floor. For application advice or to source genuine Tungaloy DCMT070204 T5115 inserts, contact Metav Werkzeuge for prompt technical guidance and reliable supply. Technical Data Article number: 6864770 SKU: 6864770-Tungaloy Manufacturer SKU: TUN6864770 Product name: DCMT070204 T5115 Tungaloy insert Facts Corner radius: 0.4 mm Thickness: 2.38 mm Size designation: 07 Clearance angle: 7° Lead/approach angle: 55° Countersink angle range: 40°–60° Special features Material: carbide Coating: CVD Grade: T5115, universal for cast iron Shape: rhombic 07 Chipbreaker: single-sided Hole: with central hole, cylindrical style + one-sided countersink Typical application: external and internal turning FAQ What materials is this insert suitable for? The DCMT070204 T5115 insert from Tungaloy is formulated primarily for cast iron machining; the T5115 CVD-coated carbide grade provides balanced wear resistance and edge stability for a broad range of grey and nodular cast irons (SKU 6864770-Tungaloy). Can this insert be used for internal turning as well as external turning? Yes, the geometry and single-sided chipbreaker make the insert suitable for both external and internal turning operations when paired with a compatible ISO holder; refer to the DCMT070204 T5115 specification for holder compatibility and clamping requirements. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius offers a compromise between strength and finish: it helps protect the cutting edge during interrupted cuts while still achieving a good surface quality on cast iron components when appropriate feeds are selected. What does the central hole and countersink provide? The central cylindrical hole with a one-sided countersink (40°–60°) ensures secure and repeatable clamping in standard indexable insert holders, which improves stability and reduces the risk of insert movement under load for the DCMT070204 T5115 insert. Is the T5115 grade resistant to abrasive wear? The T5115 CVD-coated carbide grade provides enhanced wear resistance compared with uncoated substrates; this improves performance in abrasive cast iron applications and contributes to longer tool life for the insert (manufactured by Tungaloy). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, an accurate 0.4 mm corner radius for profile control, and a standardised ISO form for reliable holder compatibility; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCMT070204 T6215 turning insert – Tungaloy ISO rhombic insert for turning The DCMT070204 T6215 is an ISO rhombic turning insert designed for stable to lightly interrupted machining of stainless steels, offering a CVD-coated carbide grade tuned for wear resistance. CVD-coated carbide for stainless steel 0.4 mm corner radius for fine profiling 7° clearance angle with 55° rhombic form Cylindrical hole with 40°–60° countersink Proven cutting performance for stainless-steel turning The CVD-coated T6215 grade delivers high wear resistance during continuous and lightly interrupted cuts, helping to extend tool life in production turning. The carbide substrate combined with the coating stabilises the cutting edge and reduces flank wear, which in turn supports consistent cycle times and fewer insert changes. For shops seeking predictable output, this cutting grade is suitable where stable clamping and controlled feeds are possible, improving overall process economy and reducing downtime. Precise fit and stable clamping for repeatable results As an ISO-standardised rhombic insert, compatibility with holders depends on form, clearance, tolerance class, attachment and thickness; the ISO designation simplifies selection for common external holders and boring bars. The insert features a cylindrical hole with a single-side countersink (40°–60°), and a plate thickness of 2.38 mm, which contribute to secure seating and rigidity. Correct combination with the appropriate clamping kit and replacement screws ensures repeatable reference points and stable cutting conditions, supporting dimensional accuracy across batches. Better surface finish and controlled chip formation The 0.4 mm corner radius is engineered to balance edge strength with the ability to produce fine profiles and improved surface quality on stainless steels. The single-sided chipbreaker supports reliable chip control when the cutting parameters and feed are matched to material and stability. The 55° rhombic geometry provides an approach angle that reduces cutting forces in many turning tasks, helping to maintain a stable cutting edge and consistent surface roughness when paired with the T6215 grade. Easy integration into existing tooling systems The insert forms part of a system comprising the ISO plate, a compatible external holder or boring bar, a locating shim or clamping set, and spare screws. Stock reference information—SKU 6945241-Tungaloy and manufacturer article number 6945241—simplifies reorders and inventory tracking. Selection of the correct chipbreaker style and suitable feed/speed combination is recommended to match the stability of the setup; for interruptions or poor rigidity, a more robust mounting or a different chip control geometry should be considered to maintain performance. For high-performance stainless-steel turning with Tungaloy's T6215 grade, contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945241 Manufacturer SKU: TUN6945241 Metav SKU: 6945241-Tungaloy Facts Shape: rhombic, 55° diamond angle Size designation: 07 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Special features Grade: T6215 (CVD-coated carbide) Chipbreaker: single-sided Hole: cylindrical with single-side countersink (40°–60°) Suitable for: turning; stainless steels; stable to lightly interrupted cuts FAQ What materials is this insert suited for? The DCMT070204 T6215 insert is formulated for machining stainless steels under stable to slightly interrupted conditions and provides wear resistance through its CVD-coated carbide grade. Which holder features are required for correct mounting? Correct mounting requires a holder compatible with a 55° rhombic ISO insert, matching the form, clearance, thickness (2.38 mm) and the cylindrical hole with countersink as specified for this insert. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius provides a balance between edge strength and surface quality, enabling finer finishes on stainless-steel components while preserving edge life under appropriate cutting parameters. Is this insert suitable for interrupted cuts? The T6215 grade performs well in stable to lightly interrupted cuts; for heavier interruptions, evaluate clamping rigidity or consider a more robust geometry or mounting solution. What information helps to reorder the same insert? Use the manufacturer article number 6945241 or the SKU 6945241-Tungaloy when reordering to ensure the correct DCMT070204 T6215 Tungaloy turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T6215 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, ISO‑compliant insert that combines consistent tool life with secure clamping and predictable chip control; order directly via Metav Werkzeuge or consult our specialists for application advice. DCMT070204 T6215 — Tungaloy indexable turning insert for ISO turning, rhombic 07, CVD‑coated carbide DCMT070204 T6215 is an ISO‑standard indexable insert designed for external and internal turning, optimised for stainless steels under stable to lightly interrupted conditions CVD‑coated cemented carbide T6215 Rhombic 07 insert, 55° cutting geometry 0.4 mm corner radius, thickness 2.38 mm With cylindrical hole and one‑sided countersink Stable cutting performance where consistent tool life matters The CVD‑coated cemented carbide grade T6215 provides a wear‑resistant cutting edge that extends usable tool life during serial turning operations. The combination of coating and substrate reduces flank wear and maintains cutting geometry over longer cycles, which helps to keep cycle times stable and rework rates low. Specified as an ISO‑compliant rhombic insert, the component is intended for machining stainless steels where predictable edge behaviour and low microchipping are priorities. Precision geometry for secure clamping and reproducible results With a 55° cutting geometry, 0.4 mm corner radius and 2.38 mm thickness, the insert offers a balance between edge strength and accessibility in medium‑duty turning. The cylindrical hole and one‑sided countersink (40°–60°) ensure consistent positioning in standard ISO toolholders; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. Using the correct pocket and clamping set reduces vibration and contributes to repeatable surface finishes. Effective chip control and productivity in stainless steel turning The single‑sided chipbreaker design supports controlled chip formation for stable cutting when turning stainless steels, where long, stringy chips can otherwise impede productivity. Choosing the right chipbreaker and grade for the workpiece material and machining stability reduces interruption frequency and minimises tool changes, which in turn yields higher process efficiency and lower overall production cost per part. System compatibility and workshop implementation As part of an ISO insert system, this rhombic indexable plate is intended to be used with a matching external holder or boring bar, a suitable shim/clamping set and replacement screws. The insert’s ISO designation and dimensions support straightforward planning for tool inventory and quick changeovers. For applications with marginal stability or interrupted cuts, pairing the insert with a rigid holder and optimised cutting parameters will improve tool life and surface quality. Contact Metav Werkzeuge for a detailed application assessment of Tungaloy turning inserts and to request cutting data sheets — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945250 Manufacturer SKU: TUN6945250 Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide (CVD‑coated) Facts ISO designation: DCMT070204 Grade / coating: T6215 Insert shape: rhombic (07) Cutting edge angle: 55° Clearance angle: 7° Corner radius: 0.4 mm Thickness: 2.38 mm Special features With cylindrical hole and one‑sided countersink (40°–60°) Single‑sided chipbreaker Designed for external and internal turning Optimised for stainless steels under stable to lightly interrupted conditions System: ISO insert for compatible holders, shims and screws FAQ What materials is this insert suited for? The Tungaloy DCMT070204 T6215 insert is optimised for machining stainless steels and performs best under stable to lightly interrupted cutting conditions. How does the T6215 grade affect tool life? The T6215 CVD‑coating enhances wear resistance and helps maintain a sharp edge longer, resulting in more consistent tool life for repetitive turning tasks. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; use an ISO‑compliant rhombic pocket and matching clamping set for secure fitment. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm radius provides improved edge strength while still allowing good surface finish; for finer finishes, consider smaller radii where holder and stability permit. Does the insert require a special screw or shim? Use the standard ISO clamping set and replacement screws specified for the chosen holder; the insert’s cylindrical hole with one‑sided countersink aligns with common ISO fastening interfaces. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070204 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated carbide T6215 and a compact 55° rhombic geometry with a 0.4 mm corner radius ensure reliable, repeatable turning of stainless steels; compatibility with ISO holders and a secure cylindrical hole with countersink allow fast, safe insert changes. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. DCMT070204 T6215 — DCMT 070204 turning insert, CVD-coated carbide (Tungaloy) DCMT070204 T6215 is an ISO rhombic turning insert for precision external and internal turning, optimised for stainless steels under stable to lightly interrupted cutting conditions CVD-coated carbide for high wear resistance 55° rhombic geometry for versatile turning 0.4 mm corner radius for fine surface finish Cylindrical hole with countersink for secure clamping Long lasting, wear‑resistant cutting for stainless steels The CVD‑coated carbide grade T6215 provides a robust cutting edge and predictable wear behaviour when machining stainless steels. The chemical vapour deposition layer improves resistance to adhesion and work‑hardening typical of these alloys, which helps to extend tool life and reduce unexpected downtime. Selecting a CVD‑coated grade means fewer insert changes and more consistent batch quality, which supports efficient production planning and lowers the cost per turned component. Geometry engineered for accuracy and accessibility The 55° rhombic geometry combined with a 0.4 mm corner radius and a 7° relief angle delivers a balance of accessibility and rigidity: the acute included angle allows approach into shoulders and internal profiles, while the modest corner radius improves surface finish without compromising strength. The 2.38 mm plate thickness ensures adequate support in standard ISO holders, translating into stable cutting conditions and repeatable dimensional results for both external and internal turning tasks. Secure fastening and simple holder compatibility Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; the DCMT070204 is supplied with a cylindrical hole plus a single‑sided countersink (40°–60°) to match common clamping systems. This hole design provides reliable seating and repeatable register position on compatible inserts, reducing setup time and improving process security. Where uncertainty exists on holder fitment, the insert designation and tolerance class should be checked against the holder specification to ensure optimal clamping and cutting performance. Predictable chips and steady productivity The one‑sided chipbreaker is matched to the grade and intended cutting mode, promoting controlled chip formation under stable to slightly interrupted conditions. Predictable chip control helps maintain machine uptime and operator safety while supporting consistent surface quality — an advantage in repetitive production environments. With the combination of Tungaloy metallurgy and ISO standardisation, the insert supports efficient batch processing and dependable finishing, enhancing both throughput and product conformity. For tailored application advice on the Tungaloy DCMT070204 T6215 CVD‑coated turning insert or to place an order through Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876417 Manufacturer SKU: TUN6876417 SKU: 6876417-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Insert designation: DCMT070204 Grade: T6215 Thickness: 2.38 mm Insert size: 07 Included angle: 55° Relief angle: 7° Corner radius: 0.4 mm Special features Rhombic plate form CVD‑coated carbide cutting material One‑sided chipbreaker With hole: cylindrical hole + single‑sided countersink (40°–60°) Application: turning of stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert suited for? The DCMT070204 T6215 insert is specified for turning stainless steels, with the CVD coating improving resistance to adhesion and enabling longer tool life in these alloys. How does the insert attach to a holder? The plate features a cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. What benefits does the T6215 grade provide? The T6215 CVD‑coated carbide grade offers enhanced wear resistance and stable cutting behaviour, which results in fewer index changes and more consistent surface finishes during turning. Which geometrical features affect accessibility and finish? The 55° rhombic geometry, combined with a 0.4 mm corner radius and 7° relief, allows access to shoulders and internal profiles while delivering improved surface quality on finished parts. Can this insert be used for internal turning as well as external? Yes — the insert’s rhombic shape and compact geometry make it suitable for both external and internal turning operations when used with compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T6215 Wendeplatten - Tungaloy
Benefit from a CVD‑coated carbide grade T6215 that provides wear resistance for turning applications and a rhombic DCMT form with a 0.4 mm corner radius for reliable finishing; order directly via Metav Werkzeuge or consult our team for application guidance. DCMT 070204 T6215 – Turning insert (rhombic, 7° clearance) by Tungaloy A DCMT070204 T6215 ISO turning insert designed for stable to slightly interrupted external and internal turning, optimised for machining rostfreier Stahl. CVD-coated solid carbide grade T6215 Rhombic DCMT form, 7° clearance 0.4 mm corner radius for fine finishing Cylindrical hole with single-sided countersink Stable cutting on rostfreier Stahl with wear-resistant coating The CVD-coated solid carbide grade T6215 is formulated for consistent performance when machining rostfreier Stahl under stable to slightly interrupted conditions. The engineered coating increases wear resistance and contributes to predictable tool life, which helps to reduce downtime and tooling costs. As a result, the insert delivers improved process reliability and surface integrity during finishing passes, supporting efficient production cycles in turning operations. ISO compatibility and secure mounting for precision turning Designed as an ISO-standard indexable plate, the rhombic insert follows the DCMT designation and is compatible with matched external holders and boring bars when form, clearance angle, tolerance class, fastening method, size and thickness align. The designation indicates a size 07 plate with a thickness of 2.38 mm and a 0.4 mm corner radius; the insert features a cylindrical centre hole with a single-sided countersink (40°–60°) for secure clamping. This geometry supports repeatable seating and stable cutting, simplifying tool setup and reducing vibration during turning. Chip control and application‑oriented selection The insert is supplied with a single-sided chipbreaker, allowing effective chip formation when matched to cutting conditions and material. Selection of the correct chipbreaker and grade is crucial: match the chip geometry and the T6215 wear properties to the specific workpiece material, machining stability and depth of cut. Choosing the appropriate chip control strategy reduces rework, enhances surface finish and shortens cycle times — a rational step towards consistent productivity in workshop and production settings. Practical benefits for workshop productivity With a compact 0.4 mm corner radius and 7° clearance, the plate is well suited to fine finishing and tight tolerance turning where edge stability and reduced chatter are priorities. The robust carbide substrate offers reliable performance across a range of turning tasks, and the standard ISO form simplifies tool inventory management. For applications where machining conditions vary, the combination of CVD coating and the specified geometry supports long tool life and reproducible results, balancing cost efficiency with process quality. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy DCMT070204 T6215 insert, application-specific cutting data and current availability. Technical data Article number: 6876423 Manufacturer SKU: TUN6876423 SKU: 6876423-Tungaloy Model series: ISO turning indexable inserts Designation: DCMT070204 T6215 Brand: Tungaloy Facts Size: 07 Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.4 mm Wedge angle: 55° Special features Material: carbide Coating: CVD Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Form: rhombic (DCMT) System components: ISO insert, matching external holder or boring bar, shim and clamping set, replacement screws FAQ Which holders are compatible with this DCMT insert? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the DCMT form and size 07 mean the insert fits ISO‑conforming external holders and boring bars designed for DCMT0702‑type plates. Can this insert machine rostfreier Stahl? Yes, the T6215 CVD‑coated carbide grade is specified for wear‑resistant performance when turning rostfreier Stahl under stable to slightly interrupted conditions. What does the designation DCMT070204 indicate? The code denotes a rhombic DCMT form, plate size 07, a thickness of 2.38 mm and a corner radius of 0.4 mm, combined with the specified hole and chipbreaker style. Is the chipbreaker suitable for roughing operations? The supplied single‑sided chipbreaker is optimised for controlled chip formation; match the chipbreaker geometry and the T6215 grade to the intended cutting parameters to ensure effective performance for roughing or finishing. Does the insert require specific clamping hardware? Secure clamping with the appropriate ISO‑compliant holder, shim or clamping set and the correct replacement screws ensures repeatable seating; the insert’s cylindrical hole with countersink (40°–60°) is designed for reliable fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and ISO compatibility for consistent stainless steel turning results; the rhombic form with a 0.4 mm corner radius ensures predictable edge contact and surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT 070204 T6215 – ISO rhombic turning insert for stainless steel machining by Tungaloy The DCMT070204 T6215 is an ISO-indexable turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted conditions. CVD-coated carbide for wear resistance Optimised for stainless steel turning Single-sided chipbreaker for reliable chips ISO rhombic insert, 7° clearance High-performance coating and material for longer cutting intervals The insert is produced from carbide with a CVD-coated surface, which provides superior abrasion resistance during prolonged contact with workpieces made from stainless steel. This coating reduces flank and crater wear, enabling longer cutting intervals and more consistent component dimensional stability. For plant planners and production engineers, the measurable outcome is reduced tool change frequency and fewer unscheduled stops, leading to improved throughput and lower unit processing time. ISO conformity and geometry for secure clamping and repeatable results Designed to the ISO turning insert family, the rhombic shape and standardised hole and seating geometry ensure compatibility with a wide range of compatible holders. The insert is supplied with a cylindrical hole and one-side countersink (40°–60°) that suits common clamping systems; the 7° clearance and 55° included angle produce a stable cutting edge contact that minimises rubbing. These characteristics mean the insert can be located and indexed reliably, so repeatability and process stability are supported across batch runs. Controlled chip formation and predictable surface finish A single-sided chipbreaker matched to the grade promotes controlled chip flow when machining stainless steel, helping to avoid built-up edge and thermal transfer to the component. The geometry, coupled with a 0.4 mm corner radius and 2.38 mm thickness, balances strength and cutting-line access for fine finishing and roughing passes. For production managers seeking cost-effective performance, the predictable tool life and consistent surface quality contribute to a lower total cost of ownership while maintaining part tolerances. For application-specific selection of the Tungaloy DCMT070204 T6215 insert and reliable supply, contact Metav Werkzeuge for expert guidance and prompt delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876414 Manufacturer SKU: TUN6876414 SKU: 6876414-Tungaloy Brand: Tungaloy Numbers / Core technical data Included angle: 55° Clearance angle: 7° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 07 Designs / Special features Grade: T6215 Substrate/coating: CVD-coated carbide Plate form: rhombic Hole style: cylindrical hole with one-side countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) FAQ What materials is this insert suitable for? The DCMT070204 T6215 insert is specified for stainless steel machining and the CVD-coated carbide substrate is selected to resist abrasive and adhesive wear common in these alloys. How does the insert mount to standard holders? The insert follows ISO-indexable geometry; the cylindrical hole with one-side countersink (40°–60°) and standardised form permit secure clamping in matched external holders and boring bars. What is the benefit of the single-sided chipbreaker? A single-sided chipbreaker on the DCMT070204 T6215 promotes stable chip control during turning, reducing the risk of built-up edge and improving surface quality over extended cuts. Which cutting conditions are recommended for this grade? The T6215 grade is optimised for stable to lightly interrupted cutting when machining stainless steels; choose speeds and feeds that avoid excessive heat concentration to extend tool life. Can the corner radius be changed for different finishes? The delivered insert has a 0.4 mm corner radius, which balances strength and finish; for finer finishes, a smaller radius insert can be selected subject to holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
High wear resistance and a CVD-coated carbide grade deliver consistent productivity and reliable edge stability in medium steel turning; the rhombic 07 geometry with a 0.4 mm corner radius and 7° relief supports precise finishes and repeatable results. Order the insert directly via Metav Werkzeuge or consult our specialists for process-matched advice. DCMT070204 T9215 — DCMT ISO turning insert for turning, Tungaloy The DCMT070204 T9215 is an ISO rhombic turning insert designed for medium steel machining, featuring a single-sided chipbreaker and robust CVD-coated carbide for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 Rhombic insert 07 with 55° cutting angle 7° clearance and 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Greater productivity for medium-steel operations The CVD-coated carbide grade T9215 combines elevated wear resistance with good toughness to maintain cutting-edge integrity under sustained cutting conditions. This leads to longer tool life and fewer indexings, which in turn reduces downtime and overall unit costs per part. The grade is optimised for medium steel machining and performs well in continuous to slightly interrupted cuts, delivering consistent chip formation and stable performance when higher feed rates are required. Emphasis on measurable outcomes—improved cycle time and predictable regrinds—supports reliable planning in production environments. Precision geometry for surface quality and repeatability Rhombic geometry with a 55° approach provides a balance between strength and accessibility, enabling improved surface finish on external and internal turning tasks while maintaining rigidity. The 0.4 mm corner radius and 7° relief minimise rubbing and distribute cutting forces, which reduces vibration and contributes to process stability. As an ISO-compliant indexable insert, compatibility with holders depends on form, relief angle, tolerance class, fastening, size and thickness; attention to these parameters ensures correct seating, repeatable clamping and consistent part tolerances across batches. Secure clamping and effective chip control for smoother workflows The insert’s cylindrical hole with a one-sided countersink (40°–60°) facilitates secure fastening and simple replacement during tool changes. The single-sided chipbreaker is matched to the grade and intended for reliable chip control, aiding evacuation and helping to protect the cutting edge in slightly interrupted or continuous cuts. With a plate thickness of 2.38 mm, the design offers sufficient stiffness for typical turning operations while supporting predictable cutting forces. Where holder compatibility needs verification, assess form, relief angle, tolerance class, fastening, size and thickness to avoid misuse and ensure operational efficiency. Contact Metav Werkzeuge for application-focused recommendations on Tungaloy carbide inserts and quick availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773973 SKU: 6773973-Tungaloy Manufacturer SKU: TUN6773973 Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT070204 Facts Grade: T9215 Material: Carbide (CVD-coated) Application: Turning Thickness: 2.38 mm Clearance angle: 7° Corner radius: 0.4 mm Cutting angle: 55° Special features Rhombic insert, size 07 Single-sided chipbreaker With hole; cylindrical hole + one-sided countersink 40°–60° Compatible with ISO holders (form, relief, tolerance, fastening, size, thickness) FAQ Which materials is this insert best suited for? The DCMT070204 T9215 insert (Tungaloy, SKU 6773973-Tungaloy) is optimised for medium steel machining, offering a balance of wear resistance and toughness suitable for continuous to slightly interrupted turning operations. What cutting conditions suit this grade and geometry? Use the CVD-coated grade for stable, higher-speed turning with moderate feeds; the rhombic 07 geometry and 0.4 mm radius favour good surface finish while the single-sided chipbreaker supports effective chip evacuation. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures precise seating and secure fastening in compatible holders, reducing play and improving repeatability at each index. What should be checked for holder compatibility? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; verify these parameters against the holder specifications before mounting the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
Highly productive turning with a CVD-coated carbide grade and a 0.4 mm corner radius delivers robust performance in medium steel machining; the 7° clearance angle reduces cutting forces and extends tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice and availability. DCMT 070204 T9215 — Turning insert, CVD-coated carbide, 0.4 mm (Tungaloy) A DCMT070204 T9215 indexable turning insert engineered for medium steel turning, combining wear resistance with reliable fracture toughness for continuous to light interrupted cuts CVD-coated carbide grade T9215 for durability 0.4 mm corner radius for precise profile control 7° clearance angle for reduced cutting forces Cylindrical hole with single-sided countersink (40°–60°) Precise cutting performance that raises throughput The DCMT070204 T9215 insert is designed to increase operational efficiency in medium steel machining by combining a CVD-coated carbide substrate with a small 0.4 mm corner radius. This geometry supports precise profile generation while distributing cutting loads to reduce edge chipping. The 7° clearance angle helps to lower friction at the cutting zone, which in practice leads to improved tool life and fewer interruptions on the shop floor. For process planners, this means predictable cycle times and stable chip formation during both external and internal turning operations. Consistent chip control and surface quality A single-sided chipbreaker integrated with the insert geometry ensures controlled chip flow for the typical cutting conditions this grade targets. The CVD-coated surface provides enhanced wear resistance while maintaining sufficient toughness to withstand light interruptions, which together contribute to consistent surface finish and repeatable dimensional results. Choosing the correct chipbreaker and grade for the workpiece material and machining stability reduces rework and increases first-pass yield, making the tool a reliable choice for production-oriented turning tasks. System compatibility and secure clamping for uninterrupted production Compatibility with toolholders is governed by plate form, free angle, tolerance class, fastening method, size and thickness — the insert follows the ISO plate family for simple integration into existing tool systems. The rhombic plate form, 2.38 mm thickness and the cylindrical hole with single-sided countersink (40°–60°) allow secure clamping with standard underlay and clamp kits, while replacement screws are accommodated as part of the system set-up. For machinists facing mixed batch sizes, this combination of secure fixing and ISO conformity supports fast changeovers and consistent cutting conditions across different machines. For tailored advice on integrating Tungaloy turning inserts into production, contact Metav Werkzeuge for application recommendations and stock information — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6773985 Manufacturer SKU: TUN6773985 SKU: 6773985-Tungaloy ISO designation: DCMT070204 Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 55° Plate thickness: 2.38 mm Plate size: 07 Special features CVD-coated carbide grade T9215 Rhombic plate form, one-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) For external and internal turning Compatible with ISO turning holders and clamping sets FAQ What materials is this insert suited for? The insert is formulated for medium steel machining; the T9215 CVD-coated carbide offers a balance of wear resistance and toughness suitable for continuous to lightly interrupted cuts. How is the insert fixed in the holder? Clamping uses the cylindrical hole with single-sided countersink (40°–60°) together with standard underlays and clamp kits; correct torque and compatible screws ensure secure seating. Can this insert be used for internal turning as well as external turning? Yes — the geometry and rhombic form make the insert suitable for both external and internal turning applications when paired with the appropriate ISO holder. What benefits does the CVD coating provide? The CVD-coated layer on the carbide substrate increases abrasion resistance and supports higher productivity by reducing flank wear under typical steel cutting conditions. Which product code should be referenced when ordering? Reference the ISO designation and article details: DCMT070204 T9215, article number 6773985 (Manufacturer SKU: TUN6773985) for accurate supply and documentation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.4 mm corner radius for fine finishes, and ISO compatibility for simplified tool-system integration. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT 070204 T9215 Turning insert — Tungaloy, CVD-coated carbide, 7° clearance DCMT070204 T9215 is an ISO-format indexable turning insert for external and internal turning applications, optimised for medium-steel machining. CVD-coated carbide for long tool life Single-sided chipbreaker for controlled chips Rhombic 07 form with 55° cutting angle 0.4 mm corner radius for fine surface quality Reliable wear resistance for productive turning The CVD-coated carbide grade T9215 combines high wear resistance with mechanical robustness, making it a suited choice for medium-steel operations where continuous to slightly interrupted cuts are common. The coating reduces flank wear and helps maintain a stable cutting edge over longer runtimes, which in turn supports more consistent cycle times and fewer tool changes. As an ISO-compatible insert, it contributes to predictable process economics and easier stocking within a standardised tooling system. Precise geometry for secure clamping and consistent finishes The rhombic insert geometry with a nominal 55° cutting angle and a 7° clearance ensures secure seating in compatible holders and predictable cutting forces. The 0.4 mm corner radius supports improved surface quality on finishing passes while the single-sided chipbreaker promotes controlled chip formation under a variety of cutting conditions. A cylindrical hole with a one-sided countersink (40°–60°) improves repeatable positioning and clamping reliability, reducing the risk of insert movement even at higher feed rates. System compatibility that reduces downtime ISO-format indexable inserts require matching holders and clamping kits; compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert is part of a practical system comprising the indexable plate, an appropriate external holder or boring bar, a locating shim or clamp set, and replacement screws. This system approach minimises set-up time and supports swift replacement routines on the shop floor, improving overall equipment effectiveness and helping to maintain steady production output. Application guidance and machining tips Designed primarily for turning of medium steels, the insert performs best when the chipbreaker and grade are matched to the workpiece material, machining strategy and part stability. The plate thickness of 2.38 mm and the 07 size make this insert suitable for a range of toolholders aimed at small- to medium-diameter turning. For optimal results, pair the insert with a holder that matches the 55° geometry and verify clamping torque and seating cleanliness before cutting. Where slightly interrupted cuts occur, T9215’s blend of abrasion resistance and toughness helps avoid premature edge failure. For reliable high-volume turning with Tungaloy quality, contact Metav Werkzeuge for tailored recommendations, sample availability and procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777774 SKU: 6777774-Tungaloy Manufacturer SKU: TUN6777774 Model series: ISO turning indexable inserts Data Corner radius: 0.4 mm Clearance angle: 7° Thickness: 2.38 mm Size: 07 Cutting angle: 55° Special features Material: carbide Coating: CVD Grade: T9215 Shape: rhombic Chipbreaker: single-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning Typical use: external and internal turning FAQ What materials is this insert best suited for? The DCMT070204 T9215 indexable insert is optimised for medium steels; the CVD-coated carbide grade T9215 provides a balance of wear resistance and toughness for productive steel turning. Can the insert be used for interrupted cuts? Yes, the T9215 grade and the insert’s mechanical robustness allow for continuous to slightly interrupted cuts; however, severe interruptions require application-specific verification. Which holder geometry is required for this insert? Holders must match the rhombic 07 form, 55° cutting angle and 7° clearance; compatibility depends on form, tolerance class, fastening and thickness so use a matched ISO-compatible holder. How does the chipbreaker affect performance? The single-sided chipbreaker promotes controlled chip flow for stable cutting and improved surface quality when machining medium steel with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated T9215 carbide grade and the precise DCMT070204 geometry to increase turning productivity with reliable wear resistance and fracture toughness; order directly via Metav Werkzeuge or request tailored advice from our consultants. DCMT 070204 T9215 indexable insert for turning — Tungaloy A DCMT070204 T9215 indexable insert engineered for external and internal turning, combining a rhombic form with a 7° clearance angle and a robust CVD coating for medium‑steel machining. DCMT070204 rhombic insert, size 07 CVD-coated carbide T9215 for wear resistance Single-sided chipbreaker, with hole and countersink Suitable for external and internal turning operations Higher output through a durable CVD coating The combination of a CVD‑coated surface and a wear‑resistant T9215 grade gives the insert extended life in production environments where sustained performance matters. This construction reduces flank wear and supports consistent cutting conditions over longer tool cycles, which leads to higher overall productivity on medium‑steel components. The design balances fracture toughness and abrasion resistance, making it appropriate for continuous to slightly interrupted cuts without compromising component quality. Predictable chip control and stable clamping A single‑sided chipbreaker offers controlled chip formation under typical turning parameters, simplifying chip evacuation and lowering the risk of entanglement. The insert’s cylindrical hole with a one‑sided countersink (40°–60°) ensures secure mounting and repeatable seating in compatible holders. When paired with the correct external holder or boring bar, plus the appropriate shim, clamp set and replacement screws, the system delivers process stability and reproducible clamping forces that support reliable series production. Optimised for medium‑steel turning and versatile process windows The tooling grade is selected as a first choice for medium steel machining, providing a balance between wear resistance and edge strength. That makes it suitable for components where good surface finish and dimensional stability are required at productive cutting speeds. For operations that demand a trade‑off between life and cutting aggressiveness, this insert grade allows modest increases in metal removal while keeping breakage risk low. Clear guidance for holder compatibility and installation Compatibility with a holder is determined by form, clearance angle (7°), tolerance class, fastening method, size and thickness. Key dimensions include size 07, thickness 2.38 mm and a 0.4 mm nose radius, while the rhombic shape allows four cutting positions where applicable. The ISO format of the insert simplifies selection for standard toolholders; ensure the chosen clamping system matches the insert’s hole style and seat geometry to secure repeatable tool life and accurate part tolerances. For indexed applications, the insert’s orientation and seating must be verified before production runs. For high‑productivity turning with Tungaloy’s T9215 carbide grade, contact Metav Werkzeuge for technical consultation or to secure supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6772453 Manufacturer article number: 6772453 Manufacturer SKU: TUN6772453 SKU: 6772453-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data ISO designation: DCMT070204 Size: 07 Thickness: 2.38 mm Clearance angle: 7° Nose radius: 0.4 mm Features Material: CVD-coated carbide (T9215) Shape: rhombic Chipbreaker: single-sided Hole: cylindrical with one-sided countersink (40°–60°) Application: external and internal turning; continuous to light interrupted cuts FAQ What materials is this insert best suited for? The DCMT070204 T9215 Tungaloy indexable insert is optimised for medium‑steel machining and provides a good compromise between wear resistance and toughness for productive turning operations. How does the chipbreaker affect performance? The single‑sided chipbreaker on this insert promotes reliable chip control under typical turning feeds, improving evacuation and reducing the chance of chip interference in continuous processes. Which holder features are essential for compatibility? Holder compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; matching the insert’s 7° clearance and seat geometry ensures secure clamping and stable cutting. What mounting characteristics does the insert have? The insert includes a cylindrical hole with a one‑sided countersink (40°–60°) for positive seating and secure fastening in ISO‑compliant toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
Take advantage of Tungaloy's CVD-coated T9215 grade and the precise 0.4 mm nose radius for efficient, high-productivity turning of medium steel; order the insert via Metav Werkzeuge or consult the team for application support. DCMT070204 T9215 DCMT indexable turning insert, 0.4 mm nose radius, 7° clearance (Tungaloy) The DCMT070204 T9215 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for medium-steel machining and continuous to lightly interrupted cuts. CVD-coated cemented carbide T9215 0.4 mm nose radius for precision 7° clearance angle for stable cutting Rhombic DCMT geometry, size 07 Cylindrical hole with 40°–60° countersink Boosted productivity for medium-steel turning The combination of CVD coating and a cemented carbide substrate in this grade delivers enhanced wear resistance without sacrificing toughness. That makes the insert particularly suitable for the medium steel sector, where a balance between tool life and edge strength is required. The result is more consistent cycle times and less frequent index changes, improving throughput and process reliability in repetitive turning operations. Geometry that stabilises the cut and improves surface finish The 0.4 mm nose radius and 7° clearance create a cutting geometry that reduces chatter and supports a predictable chip flow. The rhombic form provides two usable cutting edges per index, enabling fast indexing while maintaining a compact insert footprint in the holder. Together these features contribute to a finer surface finish and reduced rework for turned components. Compatibility and safe clamping for consistent results Delivered as an ISO-standard turning insert, compatibility with the correct external holder depends on insert form, clearance angle, tolerance class, clamping method, size and thickness. The insert is supplied with a hole (cylindrical plus one-sided countersink 40°–60°), which ensures secure seating and repeatable positioning when mounted. Selecting the appropriate holder and torque for the clamping screw preserves cutting-edge geometry and reduces the risk of unexpected edge failure. Practical benefits and process advice The T9215 grade is tuned for continuous to lightly interrupted cuts, offering a balance of wear resistance and fracture toughness that supports higher metal removal rates in production turning. For stable results, pair the insert with a correctly matched DCMT external holder, select feed and speed in line with workpiece rigidity, and prefer steady coolant or lubrication to prolong edge life. This approach keeps cycles predictable and reduces unplanned downtime. For high-productivity medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored application advice or to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772456 Manufacturer SKU: TUN6772456 Model series: ISO turning inserts Item designation: DCMT070204 T9215 Tungaloy insert Item name: DCMT070204 T9215 Tungaloy-Wendeplatte Dimensions & measurable data Nose radius: 0.4 mm Clearance angle: 7° Insert thickness: 2.38 mm Insert size: 07 Lead/angle: 55° Special features Material: cemented carbide Coating: CVD-coated grade T9215 Shape: rhombic (DCMT) Hole: with hole, cylindrical + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: external and internal turning Recommended for: medium steel machining FAQ Which materials are best machined with this insert? The DCMT070204 T9215 insert from Tungaloy is recommended primarily for medium steel; the CVD-coated cemented carbide composition balances wear resistance and toughness for productive steel turning. Does the insert suit interrupted cuts? This grade and geometry are engineered for continuous to lightly interrupted cuts; the combination of toughness and wear resistance provides reliable performance under slight interruptions. How is the insert mounted in the holder? The insert is supplied with a hole and a one-sided countersink; it requires a matching DCMT external or internal holder with the correct clamping screw and tolerance class to ensure repeatable seating. What does the T9215 designation indicate? Tungaloy’s T9215 is a CVD-coated carbide grade optimised for medium steel, offering a compromise between high wear resistance and edge stability to support productive turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, stable geometry and reliable chip control for uninterrupted production shifts; ideal for medium-steel turning operations. Order the DCMT070204 T9215 insert directly via Metav Werkzeuge or consult the technical team for process optimisation. DCMT070204 T9215 — ISO rhombic turning insert by Tungaloy for medium-steel machining DCMT070204 T9215 is an ISO-format rhombic insert designed for external and internal turning in medium steels; compatible with standard ISO holders where form, clearance angle, tolerance class and thickness match. CVD-coated carbide for high wear resistance Optimised for medium steel machining Rhombic form 07 with 7° clearance angle Single-sided chipbreaker and central hole Higher throughput through wear-resistant grade and coating The CVD-coated carbide grade T9215 combines high wear resistance with good fracture toughness to support elevated cutting speeds and steady feeds in continuous to slightly interrupted cuts. This balance reduces the frequency of index changes and contributes to predictable tool life, which in turn raises overall productivity on the shop floor. The coating enhances heat resistance during prolonged runs, allowing process engineers to exploit the grade’s potential without compromising edge security. Stable clamping geometry for repeatable accuracy and surface quality The ISO rhombic form 07 and 7° clearance produce a secure seating and consistent cutting orientation, while the 0.4 mm corner radius and 2.38 mm plate thickness maintain edge stability under load. The central hole with cylindrical bore and single-side countersink (40°–60°) ensures reliable locating and clamping in standard cutters, improving repeatability across batches. These features result in uniform part finish and reduced scrap rates, especially when paired with a properly matched holder and tightening torque. Controlled chips and easy grade selection for efficient machining Equipped with a single-sided chipbreaker, the insert promotes predictable chip formation for medium steels, reducing the risk of tangling and improving evacuation in through‑tool and open-tool setups. The CVD coating provides a hard, thermally stable surface layer, explained simply as a protective film that slows flank and crater wear. Selecting this grade and chipbreaker combination supports shorter cycle times and steadier dimensions, making it suitable for production environments that prioritise throughput and consistent component quality. For application guidance or to secure DCMT070204 T9215 inserts from Tungaloy, contact Metav Werkzeuge for tailored process support and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772448 Manufacturer SKU: TUN6772448 Metav SKU: 6772448-Tungaloy Model series: ISO turning inserts Designation: DCMT070204 Grade: T9215 Material: carbide Application: turning Core dimensions Size: 07 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle/wedge: 55° Materials & special features CVD-coated carbide grade T9215 Rhombic plate form Single-sided chipbreaker Central hole with cylindrical bore and single-side countersink (40°–60°) Suited to continuous and slightly interrupted cuts in medium steel ISO-standard compatibility for holders and clamping systems FAQ What materials is this insert best suited for? The DCMT070204 T9215 insert is specified for medium-steel machining; the T9215 grade combines wear resistance and fracture toughness for reliable performance in steel turning. How does the CVD coating benefit production cycles? The CVD coating on the T9215 grade improves thermal and abrasive resistance, extending edge life during longer runs and enabling higher cutting speeds without frequent index changes. Is the insert compatible with standard ISO holders? Compatibility depends on matching the ISO form, clearance angle, tolerance class, size and thickness; the DCMT070204 format is designed to fit ISO-compatible rhombic holders with the correct seating and screw arrangement. What chip control can be expected with the single-sided chipbreaker? The single-sided chipbreaker produces compact, controllable chips for medium steels, aiding evacuation and reducing the likelihood of entanglement in both external and internal turning. Which dimensions should be checked when fitting this insert? Verify the plate size (07), thickness (2.38 mm), corner radius (0.4 mm) and the central hole/countersink to ensure correct seating and clamp engagement for repeatable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and ISO compatibility for consistent, productive turning of medium steel; order the insert directly via Metav Werkzeuge or contact our consultants for application support. DCMT070204 T9215 — ISO rhombic turning insert for medium steel by Tungaloy The DCMT070204 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning of medium steel, offering a balance of wear resistance and toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic DCMT 07 shape, 55° cutting angle Single-sided chipbreaker, with hole and countersink Boosted production through wear-resistant coating and grade The CVD-coated carbide T9215 provides a measurable improvement in tool life and cycle stability, translating directly into higher productivity on medium steel components. The coating enhances wear resistance while the substrate maintains fracture resistance, which reduces unscheduled tool changes and scrap. For processes with continuous or lightly interrupted cuts, this combination supports stable chip formation and consistent dimensional results, making the insert a reliable choice where predictable tool life is a priority. Consistent clamping and geometry for secure machining Designed as an ISO-standard rhombic insert, the geometry and tolerances ensure compatibility with a wide range of holders when matching form, relief angle, tolerance class, fastening and thickness. The 55° entry angle and rhombic shape give a versatile cutting action suitable for profiling and general turning, while the 7° clearance minimises rubbing. The insert’s 0.4 mm corner radius balances edge strength and surface finish, and the 2.38 mm plate thickness adds rigidity for stable cuts. The central hole with cylindrical seat and single-sided countersink (40°–60°) secures positive location and repeatable clamping. Practical guidance for application and process reliability For turning operations, pair the insert with a holder and chipbreaker matched to component material and stability; the single-sided chipbreaker performs well for typical medium steel feeds and depths. The grade is formulated for continuous to slightly interrupted machining, so recommended cutting speeds tend to be higher than uncoated grades, with feeds adjusted to the chosen corner radius for the desired surface finish. When optimising parameters, focus on achieving consistent chip evacuation and avoiding excessive vibration—this preserves the coated edge and extends productive tool life. For process-critical production runs, a brief trial with representative workpieces will confirm the best speed and feed window. For tailored cutting data, availability of the Tungaloy DCMT070204 T9215 turning insert and expert advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal grade and chipbreaker for the application Technical data Article number: 6777815 Manufacturer SKU: TUN6777815 SKU: 6777815-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DCMT070204 T9215 Tungaloy-Wendeplatte Facts Plate size: 07 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance (relief) angle: 7° Cutting angle: 55° Special features Coating: CVD-coated Material: Hartmetall (carbide) Plate form: rhombic Chipbreaker: single-sided Mounting: with hole; cylindrical hole + single-sided countersink (40°–60°) Application: Drehen (turning) Suitability: optimised for medium steel machining FAQ What materials is this insert best suited for? The insert is optimised for medium steel; the CVD-coated T9215 grade delivers high wear resistance and fracture toughness for typical steel turning. Can this insert be used for internal as well as external turning? Yes, the rhombic geometry and 55° cutting angle make the indexable insert suitable for both external and internal turning when used with an appropriate holder. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius improves edge strength for roughing while still allowing a decent surface finish; smaller radii favour finer finishes at lower feeds. Is the insert compatible with ISO-standard holders? The insert follows ISO specifications; compatibility depends on matching form, relief angle, tolerance class, fastening, size and thickness to the holder. What does the central hole and countersink provide? The central cylindrical hole with a single-sided countersink ensures positive location and secure clamping, contributing to repeatable seating and reduced runout. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9225 Wendeplatten - Tungaloy
Take advantage of the robust combination of CVD-coated carbide grade T9225 and precise ISO geometry for consistent medium to heavy steel turning; order directly via Metav Werkzeuge or consult the team for application advice. DCMT 070204 T9225 — ISO turning insert, rhombic 07 form, 7° clearance (Tungaloy) The DCMT070204 T9225 is an ISO-standard rhombic indexable insert for external and internal turning, designed as a universal, robust grade for medium to heavy steel machining. CVD-coated carbide grade T9225 Rhombic 07 form, 7° clearance angle Corner radius 0.4 mm, thickness 2.38 mm Cylindrical hole with one-sided countersink Improved productivity through a universal, tough grade The combination of CVD-coated carbide and the T9225 grade delivers a balance of toughness and wear resistance that supports steady removal rates under variable cutting conditions. This indexable insert is specified for medium to heavy steel machining, which means the cutting edge resists chipping during slightly interrupted cuts and maintains performance when feed or depth fluctuates. Selecting this grade reduces unplanned tool changes and contributes directly to higher throughput on series and batch turning operations, offering a measurable improvement in process reliability. Geometry engineered for stable cutting and predictable finishes The rhombic 07 form with a 55° included angle and 7° clearance provides a stable cutting attitude and accessible cutting edge for both external and internal turning. The corner radius of 0.4 mm smooths edge engagement, improving surface finish and reducing peak loads, while the 2.38 mm thickness ensures sufficient edge support for heavier cuts. These geometric parameters translate into controlled chip formation and consistent dimensional results, particularly when paired with an appropriate chipbreaker and cutting parameters matched to the workpiece. System compatibility and secure clamping for safe operation The insert conforms to ISO standards; compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to suit common clamping systems. A typical system comprises the ISO insert, a matching external holder or boring bar, a shim or clamp set and replacement screws. Following these criteria guarantees repeatable seating, secure clamping and straightforward indexability during tool changes, which simplifies tool management in the workshop. Practical advantages for everyday turning operations Designed as a robust universal option, this insert supports a wide material range when the combination of a sturdy cutting edge and good chip control is required. The one-sided chipbreaker helps to direct chips away from the workpiece and tool, reducing rework and protecting the machined surface. For shops seeking predictable tool life and easier process planning, this geometry and grade offer a pragmatic compromise between durability and surface quality, helping to maintain stable cycle times and reduce scrap rates. Contact Metav Werkzeuge to discuss availability and the best holder selection for the Tungaloy DCMT070204 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781456 SKU: 6781456-Tungaloy Manufacturer SKU: TUN6781456 Model series: ISO turning inserts Product designation: DCMT070204 T9225 Tungaloy insert Facts Included angle: 55° Clearance angle: 7° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 07 (ISO code) Special features CVD-coated carbide, grade T9225 Rhombic 07 form One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Intended application: turning Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert best suited for? The insert is formulated as a universal, robust grade and is primarily recommended for medium to heavy steel machining; the T9225 coating supports variable cutting conditions. Does the DCMT070204 fit ISO holders? Yes — the insert follows ISO geometry; correct seating requires a holder matching the insert form, clearance angle, tolerance and thickness. Which chipbreaker should be chosen for interrupted cuts? For interrupted or variable cuts, select a chipbreaker and cutting parameters that prioritise toughness; the one-sided chipbreaker on this insert aids chip control under such conditions. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius reduces peak cutting forces and typically improves surface finish compared with a sharper edge, while still permitting moderate feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated T9225 grade and the rhombic DCMT 07 geometry for robust, repeatable turning performance; the 7° clearance and 0.4 mm corner radius support stable chip control and reliable surface finish. Order the insert directly via Metav Werkzeuge or consult our technical advisers for process matching. DCMT 070204 T9225 turning indexable insert by Tungaloy — CVD-coated carbide, rhombic DCMT 07 The DCMT070204 T9225 is an ISO‑standard rhombic turning indexable insert designed for medium to heavy Stahl turning applications, offering a balance of toughness and wear resistance for variable engagement conditions. CVD-coated carbide for enhanced durability Robust universal grade T9225 for Stahl turning ISO rhombic DCMT 07 form, 55° included angle Cylindrical hole with 40°–60° countersink Consistent performance where interrupted cuts occur The CVD‑coated T9225 grade is formulated for robust universal use, providing increased toughness where cuts are intermittent or engagement varies. The combination of a coated carbide substrate and the T9225 chemistry reduces flank wear under fluctuating loads and helps maintain cutting-edge integrity, which in turn lowers the rate of insert changes and contributes to steadier production yields. This makes the insert particularly suitable for demanding workshop and production turning tasks on Stahl. ISO compatibility for seamless toolholder integration Delivered in an ISO‑compliant rhombic DCMT 07 format, the insert integrates with standard external holders and boring bars when matched by form, clearance, tolerance class, fastening and thickness. The cylindrical hole plus a 40°–60° countersink ensures secure clamping and repeatable seating. Using an ISO‑matched holder and the correct clamping kit preserves positional accuracy and minimises runout, enabling consistent component quality across batch runs. Geometry tuned for surface finish and stability The rhombic shape with a 55° included angle and 0.4 mm corner radius balances edge strength and accessible cutting geometry. A 7° clearance angle reduces rubbing and improves surface quality while the single-sided chipbreaker supports controlled chip formation on typical turning feeds. These geometric choices reduce vibration sensitivity and help achieve reliable finishes with fewer rework cycles. Practical benefits for production and process reliability Selecting an insert with the T9225 grade and the DCMT form supports a wide material range and simplifies tooling inventory by offering a versatile option for many turning tasks. The insert’s design encourages longer tool life and stable chip control, which together reduce downtime and tool change frequency. For process planning, pair the insert with a suitable chipbreaker and holder geometry to match feed, depth of cut and component tolerances for optimal productivity and cost efficiency. Contact Metav Werkzeuge today to confirm compatibility with the machining setup and to request application advice for the Tungaloy DCMT070204 T9225 insert; Metav Werkzeuge can provide selection support and ordering information Technical data Article number: 6781484 Manufacturer article number: 6781484 SKU: 6781484-Tungaloy Manufacturer SKU: TUN6781484 Core specifications Corner radius: 0.4 mm Included angle: 55° Clearance angle: 7° Thickness: 2.38 mm Size: 07 Special features Material: Carbide Grade: T9225 Coating: CVD‑coated carbide Shape: Rhombic Hole style: Cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: Single‑sided ISO designation: DCMT070204 Application: Turning FAQ Which materials is this insert suitable for? The DCMT070204 T9225 insert is intended primarily for medium to heavy Stahl machining; the CVD coating and universal T9225 grade also allow a broad range of common engineering materials to be machined with stable chip control. What does the 0.4 mm corner radius mean for finish and strength? A 0.4 mm corner radius offers a compromise between a fine surface finish and edge robustness; it helps absorb shock during interrupted cuts while still enabling acceptable surface quality on turned parts with standard feeds. How does the hole and countersink affect clamping? The cylindrical hole with a 40°–60° countersink ensures secure and repeatable seating in compatible ISO toolholders, improving positional accuracy and reducing the risk of insert movement under load. Is this insert suitable for interrupted cuts or unstable engagement? Yes, the T9225 robust universal grade is designed for situations with varying engagement or light interruptions, providing additional toughness compared with highly wear‑resistant but brittle grades. What should be matched when selecting a holder for this insert? Match the holder by ISO form (DCMT), clearance angle (7°), tolerance class, fastening style and insert thickness to ensure proper fit and functional clamping within the tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 T9225 Wendeplatten - Tungaloy
Take advantage of the Tungaloy combination of durable CVD-coated carbide, a precise 0.4 mm corner radius and ISO compatibility for steady productivity in medium to heavy turning. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DCMT 070204 T9225 — Tungaloy DCMT070204 T9225 turning insert, CVD-coated carbide, 0.4 mm radius A DCMT070204 T9225 indexable turning insert for robust medium-to-heavy steel turning, featuring a single-sided chipbreaker and an ISO-compliant rhombic geometry CVD-coated carbide grade T9225 Robust for medium to heavy steel turning 7° clearance for secure cutting geometry Single-sided chipbreaker with cylindrical hole Consistent cutting performance in mixed steel conditions The CVD-coated carbide grade T9225 delivers a reliable balance of toughness and wear resistance tailored for medium to heavy steel turning. The coating reduces flank wear under higher temperatures while the substrate maintains fracture resistance during slightly interrupted cuts. This combination results in consistent tool life and fewer unplanned insert changes, improving machine uptime and lowering process costs. The universal character of the grade allows one insert to cover a range of steels and variable engagement conditions without sacrificing surface finish or dimensional stability. Secure seating and straightforward holder compatibility As an ISO-compliant rhombic insert, the plate is designed for standard indexable holders; compatibility is governed by form, clearance, tolerance class, attachment method, size and thickness. The 2.38 mm thickness and rhombic shape provide a stable support surface and predictable clamping behaviour, while the 0.4 mm corner radius contributes to defined cutting forces and improved edge life. Clear guidance on matching the insert to the correct external holder reduces set-up time and the risk of misalignment, ensuring reliable repeatability in batch production and ease of replacement in routine maintenance. Controlled chip formation and predictable productivity The single-sided chipbreaker supports defined chip control across a wide range of feeds and depths of cut, contributing to improved surface quality and reduced rework. The plate is supplied with hole (cylindrical hole plus one-sided countersink, 40°–60°) for secure fixation in clamping systems, and its 7° clearance combined with the 55° included geometry optimises cutting engagement for turning operations. Together, these features promote stable cutting, easier chip evacuation and a predictable process window, helping to maintain cycle times and reduce secondary operations. For reliable medium-to-heavy steel turning, request the Tungaloy DCMT070204 T9225 insert through Metav Werkzeuge or contact our technical team at Metav Werkzeuge for fitment advice – info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6781168 SKU: 6781168-Tungaloy Manufacturer SKU: TUN6781168 Model series: ISO turning indexable inserts Application: Turning Core data Corner radius: 0.4 mm Clearance angle: 7° Thickness: 2.38 mm Insert size: 07 Included angle: 55° Design & features CVD-coated cemented carbide Grade T9225 — robust universal grade for steel Single-sided chipbreaker Rhombic shape (DCMT) With hole: cylindrical hole + one-sided countersink (40°–60°) ISO designation: DCMT070204 Compatibility determined by form, clearance, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The DCMT070204 T9225 Tungaloy turning insert is optimised for medium to heavy steel turning and performs well under variable engagement conditions where toughness and wear resistance are required (SKU: 6781168-Tungaloy). How does the T9225 grade differ from standard wear-focused grades? The T9225 grade is a CVD-coated, tougher universal grade that prioritises fracture resistance and stable chip formation over maximum abrasion resistance, making it suitable for interrupted or variable cuts. Which holder characteristics must be checked before fitting the insert? Confirm holder form, clearance angle, tolerance class, attachment method, insert size and thickness; these dimensions ensure proper seating of the DCMT070204 insert and secure clamping. Can this insert be used for profiling and finishing passes? Yes; the 0.4 mm corner radius and single-sided chipbreaker provide a balance between edge strength and achievable surface finish, suitable for many finishing and semi-finishing operations. What does the hole and countersink configuration offer? The cylindrical hole with one-sided countersink (40°–60°) facilitates positive, repeatable clamping and helps maintain consistent insert position, improving process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com