DCMT 070202 GH730 Wendeplatten - Tungaloy
Reliable wear resistance from the GH730 grade combined with a compact 0.2 mm corner radius delivers consistent surface finishes and reduced tool changes; compatibility with ISO holders ensures straightforward integration on standard turning toolposts. Order the DCMT070202 GH730 insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT070202 GH730 ISO indexable turning insert (rhombic 07, 0.2 mm) — Tungaloy A DCMT070202 GH730 indexable insert engineered for external and internal turning, featuring a single‑sided chipbreaker and an ISO‑compliant rhombic form. ISO‑standard rhombic 07 insert GH730 high‑wear resistance grade 0.2 mm corner radius for fine finishes Single‑sided chipbreaker, with centre hole Extended tool life and consistent part finish The GH730 carbide grade delivers a balanced combination of wear resistance and toughness, which helps to maintain edge stability during continuous turning operations. With a 0.2 mm corner radius, the insert produces reliable surface quality on finishing and light roughing passes while reducing the frequency of tool changes. This results in higher machine uptime and a favourable cost‑per‑part ratio; the indexable design keeps inventory management efficient and replacement straightforward. ISO compatibility for simple cutter selection and secure clamping As an ISO‑standard rhombic insert, the plate integrates with many established external holders when the holder matches form, clearance, tolerance class, fixation, size and thickness. The cylindrical centre hole with a single‑side countersink (40°–60°) enables positive clamping and repeatable seating, which supports stable cutting conditions. Using ISO dimensions simplifies tooling logistics and shortens set‑up time, making process planning more predictable across machining centres. Versatile turning performance and chip control Designed specifically for turning, the insert’s single‑sided chipbreaker helps direct and break chips under typical external and internal turning conditions, improving evacuation and surface consistency. The rhombic 07 geometry and 7° clearance combine to offer good approach angles and access in confined geometries. Select the appropriate chipbreaker shape and cutting parameters according to workpiece stability and machining strategy to maximise productivity and achieve the desired component finish. For high‑performance turning with proven wear properties, request the Tungaloy DCMT070202 GH730 insert from Metav Werkzeuge — availability and application guidance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6820978 Manufacturer SKU: TUN6820978 SKU: 6820978‑Tungaloy Model series: ISO turning indexable inserts Designation: DCMT070202 Material: carbide Facts Plate thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Size: 07 Countersink angle: 40°–60° Special features GH730 Tungaloy carbide grade Rhombic plate form Single‑sided chipbreaker With centre hole and one‑side countersink ISO‑standard turning insert Intended for external and internal turning Compatibility determined by form, clearance, tolerance class, fixation, size and thickness FAQ Which turning operations is this insert suited for? The DCMT070202 GH730 indexable insert is intended for both external and internal turning; its single‑sided chipbreaker and rhombic 07 geometry make it suitable for finishing and light to medium roughing operations. How is compatibility with holders determined? Compatibility depends on form, clearance, tolerance class, fixation, size and thickness — the DCMT070202 designation matches ISO holder interfaces when those parameters correspond. What are the core benefits of the GH730 grade? The GH730 grade provides a balanced mix of wear resistance and toughness, offering stable cutting edges and prolonged tool life for the DCMT070202 insert under typical turning conditions. How should the chipbreaker be selected for a job? Choose the chipbreaker and grade to match material, cut depth and workpiece stability; for the DCMT070202 GH730, the single‑sided chipbreaker supports controlled chip formation in standard turning cycles. Is the insert indexable and which SKU identifies it? Yes — the DCMT070202 GH730 is an indexable turning insert; reference SKU 6820978‑Tungaloy and manufacturer article number 6820978 for ordering. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070202 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet wear resistance and a precise 0.2 mm corner radius for consistently high surface quality in turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. DCMT070202 GT9530 Tungaloy indexable turning insert — coated cermet, 7° relief DCMT070202 GT9530 is an ISO‑standard rhombic indexable insert for turning, optimised for finishing and light universal cuts in steel. Coated cermet grade GT9530 for long tool life ISO rhombic insert, size 07, radius 0.2 mm 7° relief angle with cylindrical hole and countersink 2.38 mm thickness for stable clamping High‑quality finishes from cermet technology The coated cermet grade GT9530 delivers a reliable balance between wear resistance and surface finish, making it suitable for finishing and light universal turning in steel. Cermet combines ceramic hardness with metal‑binding toughness, so the insert maintains cutting edge integrity under steady conditions and produces improved surface quality compared with conventional grades. For operations where a fine surface and extended tool life are priorities, this insert reduces rework and supports consistent spindle cycle times. Secure mounting and dimensional compatibility for production Compatibility with toolholders is governed by form, relief angle, tolerance class, fixation, size and thickness; the rhombic ISO geometry and 2.38 mm thickness ensure secure seating in standard holders. The insert has a cylindrical hole with a one‑sided countersink (40°–60°) that supports repeatable clamping and minimal run‑out when paired with matched clamping sets and screws. This predictable mechanical interface lowers the risk of vibration and supports steady cutting conditions on medium‑stiff setups. Application guidance for reliable machining results With a 0.2 mm corner radius and single‑side chipbreaker, this insert suits light finishing and external turning where edge strength and surface integrity matter. The 7° relief angle provides effective clearance to avoid rubbing on the workpiece, while the chipbreaker geometry helps control chip flow on common steel grades. For best results, select cutting parameters and holder rigidity that match the intended surface finish and tool life goals; under stable cutting conditions the insert offers extended performance. What the grade adds to process stability The GT9530 grade focuses on wear resistance during finishing cuts, which translates into fewer indexings and more consistent part quality across runs. Reduced flank wear sustains dimensional accuracy over longer tool life, lowering tool change frequency and contributing to predictable production planning. In series production where surface quality and repeatability are essential, the insert supports higher first‑pass yields and stable downstream processes. For tailored machining advice and prompt supply of Tungaloy inserts, contact Metav Werkzeuge today via info@metav-werkzeuge.com or +49 2822 7131930 for application‑specific recommendations and delivery options. Technical Data Article number: 6998326 Manufacturer SKU: TUN6998326 Vendor SKU: 6998326-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: DCMT070202 GT9530 Key Measurements Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Materials & Features Coated cermet grade GT9530 Material: cemented carbide substrate One‑sided chipbreaker With hole: cylindrical hole + one‑sided countersink (40°–60°) Rhombic insert form, ISO designation DCMT FAQ What materials is this insert designed for? The DCMT070202 GT9530 insert is intended primarily for use in steel machining, offering a finishing to light universal capability thanks to the coated cermet grade. How does the GT9530 grade affect tool life and surface finish? GT9530 provides enhanced wear resistance and edge stability, which helps to maintain a fine surface finish over extended cut lengths when used under stable cutting conditions. Which holder features are required for correct compatibility? Compatibility depends on holder form, relief angle, tolerance class, fixation method, size and thickness; holders designed for ISO rhombic DCMT inserts and matched clamping sets are required for reliable seating. Is the insert suitable for heavy roughing operations? This grade is optimised for finishing and light universal turning rather than heavy roughing; for high‑load roughing, a more robust geometry and different grade are recommended. How does the hole and countersink affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) enables repeatable clamping and reduced run‑out when used with appropriately dimensioned screws and underlays. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070202 GT9530 Wendeplatten - Tungaloy
Benefit from the GT9530 coated cermet’s wear resistance and the precise 0.2 mm corner radius to achieve consistent surface finish and longer tool life in stable turning setups. Order the DCMT070202 GT9530 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070202 GT9530 DCMT indexable insert for turning — Tungaloy, coated cermet, 0.2 mm radius A DCMT070202 GT9530 indexable insert designed for precision external and internal turning, offering a wear-resistant coated cermet grade for fine finishing under stable conditions. Rhombic 07 insert with 0.2 mm corner radius GT9530 coated cermet for improved wear resistance 7° clearance angle for secure cutting geometry With central hole and single-sided countersink Consistent surface finish through advanced cermet grade The GT9530 is a coated cermet developed for finishing to light-general-purpose turning of steel, delivering a marked improvement in surface quality compared with uncoated grades. The combination of the coating and cermet substrate reduces flank wear and helps maintain a sharp cutting edge under steady cutting conditions, which translates into fewer tool changes and less production variation. For operations where the priority is a superior finish with moderate cutting forces, this grade provides an economical balance between tool life and surface integrity. Geometry engineered for chip control and reliable cutting The rhombic 07 form with a 0.2 mm corner radius and 7° clearance angle creates a stable cutting geometry that supports consistent chip formation and reduces vibration when mounted correctly. The insert’s single-sided chipbreaker suits many through-cut and light-finishing passes, improving chip control where setup rigidity is good. The central configuration — a cylindrical hole with a one-sided countersink (40°–60°) — enables secure clamping in compatible holders, ensuring repeatable positioning and stable performance across serial production runs. System compatibility and practical selection advice This insert conforms to ISO designation DCMT070202, so compatibility with holders depends on matching form, clearance, tolerance class, clamping method, size and thickness. The 2.38 mm thickness and rhombic shape require an appropriate external holder or boring bar and suitable clamping accessories. Select the chipbreaker and grade according to workpiece material, machining type and the rigidity of the setup: in less stable conditions, consider a more robust grade or a different geometry; in stable configurations the GT9530 grade optimises finish and life. The insert integrates into standard ISO turning systems and supports both external and internal turning when installed in the correct holder. For precision finishing with extended tool life, choose the Tungaloy GT9530 indexable insert and contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Article number: 6998322 Manufacturer SKU: TUN6998322 SKU: 6998322-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT070202 Facts Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Insert size: 07 Included hole: with hole Special features Material: carbide Grade/coating: GT9530 (coated cermet) Shape: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System notes: compatibility depends on form, clearance, tolerance class, clamping, size and thickness FAQ Which materials is this insert suitable for? This insert with the GT9530 coated cermet is optimised for machining steel in finishing to light universal applications, providing improved surface quality and wear resistance in stable turning conditions. What does the ISO designation DCMT070202 tell me? The ISO code identifies the geometry and size class: rhombic shape, insert size 07 and the specific cutting edge form and tolerances associated with DCMT070202 inserts used for turning applications. How does the 0.2 mm corner radius affect machining? The 0.2 mm corner radius provides a compromise between edge strength and fine surface finish; it reduces edge chipping risk while still delivering smooth part surfaces in finishing operations. Is the insert compatible with standard holders? Compatibility requires a matching holder that accepts DCMT inserts and the specified thickness and hole/countersink arrangement; ensure the holder matches form, clearance angle and tolerance class for secure clamping. What role does the single-sided chipbreaker play? The single-sided chipbreaker assists predictable chip formation in finishing cuts when setup rigidity is adequate, supporting improved surface finish and stable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 GT9530 Wendeplatten - Tungaloy
Benefit from the wear‑resistant GT9530 cermet grade, the precise 0.2 mm corner radius and ISO‑rhombic geometry for consistent finishing; order the insert directly via Metav Werkzeuge or ask the consultants for application advice to ensure optimal process reliability. DCMT070202 GT9530 – ISO rhombic turning insert by Tungaloy for finishing DCMT070202 GT9530 is an ISO‑standard rhombic turning insert designed for finishing and light universal turning tasks in stable steel machining conditions Wear‑resistant GT9530 cermet coating ISO rhombic insert, size 07 0.2 mm corner radius for fine finishing Cylindrical hole with countersink 40°–60° Consistent surface quality and extended tool life The GT9530 grade is a coated cermet developed for finishing to light universal turning operations where surface quality and tool life are priorities. The composition of the cutting material delivers high wear resistance and stable cutting behaviour under steady clamping and machine conditions, which reduces process interruptions and repeat tool changes. For customers seeking reliable part finish without aggressive machining parameters, this insert supports lower cutting forces and improved part appearance compared with standard grades. Precise fit and straightforward mounting for ISO holders The insert follows ISO criteria for form, relief and tolerance so it integrates with compatible holders when matched by shape, relief angle, fastening and thickness. The rhombic geometry and 7° relief angle are optimised for common external and internal turning set‑ups, while the standard thickness of 2.38 mm ensures a secure clamping interface. The cylindrical hole with single‑sided countersink (40°–60°) supports reliable mechanical location and repeatable seating, reducing vibration and improving tool life in stable setups. Application guidance and material suitability Designed primarily for turning in steel, the insert is suited to finishing passes and light general‑purpose operations where a good surface finish is required. The one‑sided chipbreaker promotes controlled chip formation under stable conditions; selecting an appropriate chipbreaker and cutting parameters in line with workpiece stability is advised to exploit the grade’s full potential. For roughing operations or unstable setups, consider a tougher grade or increased support to avoid premature wear. Small radius, fine results and process advantages The 0.2 mm corner radius is tailored for fine finishing and minimal edge line disruption, enabling tight tolerances and superior surface appearance on turned components. The rhombic shape with an included angle of 55° offers versatility across a range of turning tasks while keeping cutting forces moderate. Combined with the coated cermet grade, this geometry helps to minimise rework and contributes to predictable tool change intervals, supporting efficient production runs and reduced downstream finishing effort. For machining challenges that demand repeatable finishing and extended tool life, contact Metav Werkzeuge for tailored advice and procurement of Tungaloy GT9530 inserts at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998334 Manufacturer article number: 6998334 SKU: 6998334-Tungaloy Manufacturer SKU: TUN6998334 Model series: ISO turning inserts ISO designation: DCMT070202 Core specifications Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Hole style: cylindrical hole + single‑sided countersink (40°–60°) Features and materials Coated cermet grade GT9530 Base material: carbide substrate One‑sided chipbreaker Rhombic insert form Compatible with ISO‑standard turning holders Application: turning, finishing to light universal operations on steel FAQ What materials is this insert suitable for? The DCMT070202 GT9530 insert is intended primarily for steel turning applications, offering a balance of surface finish and wear life for finishing passes. How does the GT9530 grade compare to standard carbide grades? GT9530 is a coated cermet grade that typically gives improved surface quality and enhanced wear resistance under stable cutting conditions compared with conventional carbide grades used for finishing. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief, tolerance and fastening; the DCMT070202 follows ISO rhombic standards and is compatible with holders designed for size 07 rhombic inserts when matched correctly. Is the 0.2 mm radius suitable for finishing tight tolerances? Yes, the 0.2 mm corner radius is designed for fine finishing work and helps achieve good surface quality with controlled cutting forces. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with a single‑sided countersink (40°–60°) provides secure mechanical location and repeatability during clamping, improving stability and reducing the risk of insert movement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of the proven combination of a finishing cermet grade, low cutting forces and ISO compatibility to improve surface quality and reduce rework; order the insert directly via Metav Werkzeuge or consult the technical team for application guidance. DCMT 070202 NS9530 turning insert — ISO rhombic finishing insert by Tungaloy DCMT070202 NS9530 is a finishing turning insert engineered for steel applications, optimised for continuous cuts and small depths of cut to deliver consistently high surface quality. Finishing uncoated cermet grade NS9530 Sharp cutting edge for superior surface finish 7° clearance angle for controlled chip formation Rhombic 07 form with 0.2 mm corner radius Achieve consistent high-quality surfaces with a finishing cermet The NS9530 grade is an uncoated cermet developed for finishing operations on steel, offering a sharp cutting edge that lowers cutting forces and promotes excellent surface integrity. This finishing grade is particularly effective in continuous cutting and when using small feeds and depths of cut, reducing the need for secondary finishing. Compatibility with standard ISO holders ensures predictable performance across various turning systems, while the rhombic geometry supports both external and internal turning tasks. Secure clamping and ISO system compatibility for repeatable results Designed as an ISO-standard indexable insert, the component features a cylindrical hole with a one-sided countersink (40°–60°) to allow reliable, repeatable clamping. The insert’s form, clearance angle, tolerance class, fastening and thickness determine holder compatibility; this makes the component straightforward to integrate into established tool systems. The secure seating and standard dimensions facilitate quick index changes and contribute to reduced setup times and stable part-to-part repeatability. Optimised chip control and machining stability for finishing passes A single-sided chipbreaker matched to the grade promotes controlled chip formation in continuous cuts, while the 7° clearance angle helps to maintain a clean cutting geometry and minimise rubbing. The small 0.2 mm corner radius supports fine surface finishes without sacrificing edge strength during light finishing passes. Together, these features enable steady cutting behaviour and predictable tool life during high-quality finishing operations on steel. Practical productivity gains and material application guidance This insert is intended primarily for turning steel in finishing applications, yielding productive machining and consistent surface results with minimal burr formation. The cemented carbide body and cermet cutting edge provide wear resistance appropriate for low to moderate cutting loads typical of finishing. Integration into a complete turning system — insert, matching external holder or boring bar, shim/clamp set and replacement screws — supports efficient tool management and cost-effective production workflows. Contact Metav Werkzeuge for purchasing, technical advice or compatibility checks on the Tungaloy DCMT070202 NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998483-Tungaloy Manufacturer article number: 6998483 Manufacturer SKU: TUN6998483 Model series: ISO-Drehwendeschneidplatten WPL designation: DCMT070202 Facts Insert size: 07 Thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Corner radius: 0.2 mm Special features Grade: NS9530 (uncoated cermet) Substrate material: cemented carbide Shape: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) ISO-standard indexable insert FAQ What machining tasks is this insert best suited for? This insert, the DCMT070202 NS9530 by Tungaloy, is best suited for finishing operations in turning, particularly continuous cuts and small depth-of-cut passes on steel. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO geometry for rhombic turning inserts; compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness. How does the NS9530 grade affect surface finish? The NS9530 uncoated cermet grade provides a sharp cutting edge and low cutting forces, which together produce superior surface quality during finishing operations. What role does the 0.2 mm corner radius play in finishing? A 0.2 mm corner radius balances edge strength and the ability to achieve fine surface finishes, making it suitable for final-pass turning where small radii and smooth surfaces are required. Does the insert require specific clamping hardware? The insert uses a central cylindrical hole with a one-sided countersink (40°–60°) for secure clamping; standard clamping sets and replacement screws for ISO inserts are applicable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet NS9530 insert with a sharp cutting edge and a fine 0.2 mm corner radius for consistently high surface quality; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT070202 NS9530 — Tungaloy indexable turning insert for precision finishing, uncoated cermet, 0.2 mm radius A DCMT070202 NS9530 indexable insert designed for precision turning and finishing operations on steel, offering a sharp cutting edge and stable performance in continuous cuts. Finishing-grade uncoated cermet NS9530 Sharp cutting edge for low cutting forces Corner radius 0.2 mm for fine surface finish Cylindrical hole with single-sided countersink Delivering consistent finishing performance for steel components The insert was developed as a finishing grade for steel, combining an uncoated cermet substrate with a razor-sharp edge geometry to reduce cutting forces and improve surface quality. This results in stable cutting behaviour during continuous turning and small depths of cut, reducing the need for secondary operations. The controlled geometry and low built-up edge tendency help maintain dimensional accuracy and repeatable part quality across production batches. Stable chip control and process reliability Process stability is supported by the single-sided chipbreaker, which was selected to match finishing conditions and the typical feed range for small passes. The one-sided chip control promotes predictable chip formation and evacuation, minimising chatter and interruptions. For demanding finishing processes, the insert’s balanced design contributes to longer effective tool life and fewer adjustments during a production shift, which translates into higher productivity and lower overall machining costs. Clear compatibility and simple system setup Compatibility with holders is determined by the insert’s form, clearance angle, tolerance class, attachment method, size and thickness. The insert is an ISO-style component in size 07, with a thickness of 2.38 mm and a clearance/freey angle of 7°, combined with an approach/lead angle of 55°; these dimensions ensure correct seating and clamping in standard turning holders. The complete system comprises the insert, a matching external holder or boring bar, a backing/clip set and replacement screws for secure mounting and repeatable clamping. Cermet advantages and operational benefits The NS9530 cermet grade provides a hard, wear-resistant cutting edge that is optimised for low cutting forces and high surface finish in finishing operations. The combination of cemented carbide body and sharp-edge geometry reduces vibration sensitivity and supports continuous cuts with small depths of cut. For shops aiming to enhance surface quality and reduce downstream polishing or grinding, this insert offers a practical and economical route to improved part finish and consistent production results. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to suit common clamping systems. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for availability and tailored application advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6998476 SKU: 6998476-Tungaloy Manufacturer SKU: TUN6998476 Model series: ISO-Drehwendeschneidplatten Facts ISO designation: DCMT070202 Grade: NS9530 Corner radius: 0.2 mm Insert size: 07 Thickness: 2.38 mm Clearance angle: 7° Approach angle: 55° Special features Material: cemented carbide Uncoated cermet grade Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) With hole FAQ What is the primary application for this insert? The DCMT070202 NS9530 insert is intended for finishing turning operations on steel where a high-quality surface finish and low cutting forces are required. Which workpiece materials are suited to this grade? The NS9530 cermet grade is optimised for steel finishing; it performs best in continuous cuts and small depths of cut that demand fine surface integrity. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation for finishing conditions, improving process stability and reducing the risk of built-up edge. How to ensure holder compatibility with this insert? Compatibility depends on insert form, clearance angle, tolerance class, attachment, size and thickness; match these parameters to the holder specifications and use the correct backing/clamp set and screws. What are the key dimensional specifications? The insert is ISO DCMT070202 with a corner radius of 0.2 mm, size 07, thickness 2.38 mm, clearance angle 7° and approach angle 55°; manufacturer SKU TUN6998476. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 NS9530 Wendeplatten - Tungaloy
Benefit from precision finishing and consistently low cutting forces thanks to the NS9530 uncoated cermet grade; the ISO geometry and standard fixation ensure reliable compatibility with common turning holders. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT070202 NS9530 indexable turning insert — uncoated cermet, fine finishing, Tungaloy DCMT070202 NS9530 is an ISO-format indexable insert designed for precision external and internal turning, optimised for fine finishing on steel with continuous cuts and small depths of cut. Uncoated cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces ISO DCMT geometry for wide holder compatibility One-sided chipbreaker optimised for continuous cuts Achieve consistent high-quality surfaces with low cutting effort The uncoated NS9530 cermet grade delivers a sharp cutting edge that reduces cutting forces and enhances surface quality on steels. This characteristic is especially valuable in finishing passes where high surface finish is required and where small depths of cut are common. The insert’s geometry supports steady cutting behaviour in continuous operations, helping to maintain part tolerances and reduce downstream polishing or grinding effort. Secure fit and predictable performance in ISO systems The ISO DCMT form follows standard dimensions and fixation criteria, so compatibility with authorised external holders and boring bars is straightforward. The insert’s relief angle of 7° and nominal approach angle of 55° are designed to match common clamp and screw patterns; compatibility depends on holder form, angle and tolerance class. This standardisation reduces set-up time and supports repeatable results across batch runs. Optimised chip control and fine-detail finishing A one-sided chipbreaker directs chips away from the cutting zone, supporting uninterrupted cutting in continuous feeds and minimising re-cutting of swarf. The small corner radius of 0.2 mm promotes fine edge definition, producing sharp contours and improving finish on turned components. These attributes make the insert suitable for external and internal finishing tasks where dimensional accuracy and visual quality are priorities. Practical guidance for selection and use Select the uncoated cermet grade when priority is finishing on steels with stable cutting conditions and modest material removal. The DCMT070202 geometry and the insert’s standardised hole and countersink ensure secure clamping; use an appropriate holder with matching form and tolerance class. If uncertainty remains about the best holder or cutting parameters for a specific component, additional process data and tailored recommendations are available. If further technical data or tailored application support is required, Metav Werkzeuge’s specialists are available to assist. Email info@metav-werkzeuge.com or call +49 2822 7131930 for machining advice, parameter recommendations and delivery options. Contact Metav Werkzeuge for tailored recommendations and fast supply of original Tungaloy DCMT070202 NS9530 indexable inserts. Technical Data Article number: 6945240 SKU: 6945240-Tungaloy Manufacturer SKU: TUN6945240 Facts Corner radius: 0.2 mm Thickness: 2.38 mm Relief angle: 7° Approach angle: 55° Size: 07 Special features ISO-format indexable insert (DCMT070202) Uncoated cermet grade NS9530 Rhombic insert shape Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker Application: external and internal turning Compatible with standard ISO turning holders FAQ What materials is this insert suited for? The DCMT070202 NS9530 insert is formulated as an uncoated cermet for finishing operations on steel and is optimised for continuous cutting and small depths of cut. How does the 0.2 mm corner radius affect machining? A 0.2 mm radius provides a fine cutting edge that improves dimensional accuracy and surface quality during finishing passes with the DCMT070202 geometry. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO DCMT dimensions and the standard hole/countersink arrangement, allowing secure fixation in holders designed for DCMT inserts. What chip control can be expected from this grade? The one-sided chipbreaker is designed to direct chips away from the cutting zone, supporting uninterrupted continuous cuts and reducing the risk of chip re-cutting. Can this insert be used for roughing? The NS9530 uncoated cermet is primarily a finishing grade; for heavy roughing it is preferable to select a grade designed for higher cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 NS9530 Wendeplatten - Tungaloy
Combining a sharp cutting edge, an uncoated cermet finishing grade and a 0.2 mm corner radius, this insert delivers low cutting forces and excellent surface quality for continuous turning operations. Order the DCMT070202 NS9530 directly via Metav Werkzeuge or consult their specialists for holder matching and availability. DCMT070202 NS9530 — Turning insert (uncoated cermet, 0.2 mm radius) by Tungaloy DCMT070202 NS9530 is an ISO-standard rhombic turning insert designed for precision finishing of steel components, offering a sharp cutting edge and stable performance in continuous cut conditions. Uncoated cermet finishing grade Sharp edge for superior surface finish One-sided chipbreaker for continuous cuts Rhombic 07 geometry with 55° included angle Deliver consistent finishing and low cutting forces for steel turning The insert is developed as a finishing grade for steel, based on an uncoated cermet substrate that prioritises a sharp edge and reduced cutting resistance. These characteristics contribute to low cutting forces, which in turn lower feed-induced vibration and support finer surface finishes during small depth-of-cut operations. The combination of sharp geometry and the small 0.2 mm corner radius enables reliable dimensional control on external and internal profiles while maintaining a high-quality surface without aggressive parameters. Stable chip control and predictable productivity A one-sided chipbreaker provides a consistent chip form suited to continuous cuts, improving evacuation and reducing the risk of built-up edge. This stability in chip formation enhances tool life and machining predictability, which is particularly valuable in serial production or when machining long parts. The finishing nature of the grade means process windows are optimised for small feeds and reduced cutting forces, resulting in a balance between surface integrity and productive machining. ISO compatibility and secure mounting for system flexibility Manufactured to ISO standards, the insert’s compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. Key geometry details — rhombic 07 shape, 55° included angle, 7° relief angle and 2.38 mm thickness — support straightforward selection of matching external holders or boring bars. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to suit common clamping systems; a complete cutting system therefore comprises an ISO insert, an appropriate external holder or boring bar, a shim/clamping set and replacement screws. If uncertainty arises regarding holder choice or clamping, Metav Werkzeuge’s consultants can advise on the correct combination for the intended turning task. Contact Metav Werkzeuge today for application advice and ordering of Tungaloy finishing-grade inserts such as the DCMT070202 NS9530 — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate support Technical data Item number: 6998468-Tungaloy (SKU) Manufacturer article number: 6998468 Manufacturer SKU: TUN6998468 Model series: ISO-Drehwendeschneidplatten Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Special features Shape: rhombic Hole style: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Grade/coating: NS9530, uncoated cermet finishing grade Typical application: turning — external and internal finishing operations System components: insert, matching external holder or boring bar, shim/clamping set, replacement screws FAQ What material is the NS9530 grade optimised for? The NS9530 grade is a finishing cermet optimised primarily for machining steel, delivering a sharp edge and reduced cutting forces for high surface quality. Which holder geometry suits this insert? Compatibility depends on holder form, relief angle, tolerance class and clamping method; the insert’s rhombic 07 shape, 7° relief angle and 2.38 mm thickness are the key parameters for selecting a matching external holder or boring bar. Is the insert suitable for continuous cuts or interrupted cuts? The one-sided chipbreaker and the uncoated cermet finishing grade make it particularly well suited to continuous cuts and small depths of cut; interrupted cuts are generally less favourable for this finishing specification. What is the correct designation and SKU for ordering? Order as DCMT070202 NS9530; the SKU/reference is 6998468-Tungaloy and the manufacturer article number is 6998468. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of precision finishing and consistent ISO compatibility combined in a compact, production-ready insert; order directly via Metav Werkzeuge or contact the consultants for application advice. DCMT070202 NS9530 ISO turning insert by Tungaloy — uncoated cermet, 0.2 mm nose radius DCMT070202 NS9530 is an indexable insert for finishing operations in turning, optimised for continuous cuts and small depths of cut Precision finishing for steel with uncoated cermet Low cutting forces and superior surface finish ISO rhombic shape 07 with 0.2 mm corner radius Cylindrical hole with 40°–60° countersink design Optimised finishing performance for steel turning The NS9530 grade is an uncoated cermet developed for fine finishing of steel, delivering a sharp cutting edge with reduced cutting forces and an improved surface result. As a finishing variety, this insert is particularly suitable for continuous cut conditions and small depths of cut where stability and surface integrity are decisive. The combination of a cermet substrate and keen geometry reduces built-in vibration and supports repeatable part quality, making it a reliable choice when consistent surface finish and dimensional control matter. Geometry and clamping designed for production reliability The insert’s ISO rhombic 07 form with a 0.2 mm corner radius and 55° included angle provides predictable engagement and toolpath clearance in typical turning set-ups. The 7° relief angle and a plate thickness of 2.38 mm contribute to a stable cutting edge, while the cylindrical hole with a countersink (40°–60°) ensures secure seating and repeatable clamping. Holder compatibility is defined by form, relief angle, tolerance class, fastening method, size and thickness; these factors determine correct seating and accurate repeatability in production toolholders. Practical application guidance and machining benefits Intended for external and internal turning, the insert is best applied as a finishing tool where fine surface quality is required. The single-sided chipbreaker promotes controlled chip formation under continuous cutting, which assists in maintaining consistent surface integrity. For cost-effective machining, select the NS9530 grade and a chipbreaker matched to the workpiece material and process stability; when used in appropriate feeds and depths, the insert supports reduced hand-finishing and shorter downstream processing. Compatibility with industry-standard ISO holders allows straightforward integration into existing tool systems and quick replacement during planned tool changes. For tailored recommendations on using Tungaloy finishing inserts and to confirm holder compatibility, contact Metav Werkzeuge via info@metav-werkezeuge.com or call +49 2822 7131930 for expert guidance and quick supply coordination Technical data Article number: 6945248 Facts Manufacturer SKU: TUN6945248 Supplier SKU: 6945248-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/coating: NS9530, uncoated cermet Special features ISO designation: DCMT070202 Shape: rhombic 07 Corner radius: 0.2 mm Plate thickness: 2.38 mm Relief angle: 7° Included angle: 55° Hole: cylindrical hole with single-side countersink 40°–60° Chipbreaker: single-sided Application: turning; finishing for steel FAQ What kind of operations is this insert designed for? The DCMT070202 NS9530 Tungaloy turning insert is intended for finishing operations in turning, especially continuous cuts and small depths of cut to achieve improved surface finish. Is this insert suitable for internal as well as external turning? Yes. The geometry and rhombic 07 form make the insert suitable for both external and internal turning when paired with compatible ISO holders. Which workpiece materials does the NS9530 grade target most effectively? NS9530 is a finishing grade optimised for steel; the uncoated cermet substrate provides a sharp edge and low cutting forces for high surface quality. How does the hole and countersink design affect clamping? The cylindrical hole with a 40°–60° countersink ensures consistent seating and secure clamping in standard toolholders, aiding repeatability during index changes. Can the insert be integrated into existing toolholder systems? Yes; the ISO designation and standardised dimensions allow integration into holders that match the form, relief angle, tolerance class, fastening and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of a precision uncoated cermet grade for finishing, a sharp cutting edge that reduces cutting forces, and consistent chip control for continuous turning operations; order or request application advice via Metav Werkzeuge for seamless integration into production. DCMT 070202 NS9530 indexable turning insert — Tungaloy DCMT070202 NS9530 is an ISO‑designated indexable insert for precision finishing in turning applications, engineered to deliver low cutting forces and superior surface quality on steel. Cermet uncoated finishing grade NS9530 Sharp cutting edge for high surface finish One-sided chipbreaker, rhombic 07 form 0.2 mm corner radius, 7° relief angle Superior surface quality through a cermet finishing grade The insert is produced in an uncoated cermet grade specifically developed for finishing steel, delivering a high surface finish with reduced built‑up edge. Cermet combines ceramic hardness with metallic toughness, which lowers friction at the cutting edge and helps achieve finer toolmarks compared with conventional carbide in similar conditions. The result is fewer rework cycles and more consistent part quality when executing continuous cuts or small depth passes. Secure fit and ISO compatibility for predictable performance Designed to the ISO turn insert standard, the geometry and mounting features ensure ISO‑compliant compatibility with corresponding external holders and boring bars. The rhombic 07 form and the specified hole configuration — a cylindrical bore with a single‑sided countersink at 40°–60° — determine correct clamping and orientation. Clear specification of form, relief angle and tolerance class enables predictable seating and repeatable positioning, which reduces setup time and improves process stability. Consistent chip control for continuous turning The single‑sided chipbreaker is matched to the grade to produce stable chip formation under continuous cutting conditions; this reduces the risk of entanglement and stabilises cutting forces. Stable chips contribute directly to machining efficiency and tool life, and the combination of a sharp cutting edge with the chipbreaker supports low cutting forces and steady material removal. For applications requiring fine finishing allowances and reliable cycle times, this arrangement supports higher productivity with fewer interruptions. Application focus: finishing steel with small depths of cut Optimised for turning operations on steel, the insert excels where low cutting forces and excellent surface integrity are required. The small 0.2 mm corner radius limits form deviation at the component edge, while the nominal 2.38 mm thickness provides adequate rigidity for finishing passes. Select the NS9530 grade and the single‑sided chipbreaker when working with continuous cuts and small feed per rev to obtain repeatable dimensional control and improved surface texture. For application advice or to request a quote for the Tungaloy DCMT 070202 NS9530 indexable insert, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998464 SKU: 6998464-Tungaloy Manufacturer SKU: TUN6998464 Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT070202 Facts Plate size: 07 Plate thickness: 2.38 mm Relief angle: 7° Included angle: 55° Corner radius: 0.2 mm Special features Material: Hartmetall Cutting material: uncoated cermet NS9530 Plate form: rhombic Hole: with hole — cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: one-sided Application: Drehen (turning) Edge style: sharp cutting edge for finishing FAQ Which materials is this insert best suited for? The DCMT070202 NS9530 Tungaloy indexable turning insert is optimised for machining steel in finishing operations, offering low cutting forces and improved surface integrity. What are the corner radius and relief angle of the insert? The insert features a 0.2 mm corner radius and a 7° relief angle, providing accurate edge geometry for finishing passes. Is the cutting grade coated or uncoated? This product uses an uncoated cermet grade (NS9530), chosen for its low friction and fine finish characteristics during continuous cuts. How is compatibility with toolholders ensured? Compatibility is determined by the ISO form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation DCMT070202 indicates the standard geometry for matching holders. What cutting applications and conditions suit this insert best? The insert is intended for finishing turns with small depths of cut and continuous cutting conditions on steel, where surface finish and low cutting forces are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T6215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant CVD-coated carbide grade that is optimised for turning stainless steel, combined with a proven rhombic geometry and reliable chip control to maintain consistent production cycles; order inserts directly via Metav Werkzeuge or consult our technical advisers for machining recommendations. DCMT 070202 T6215 turning insert — Tungaloy A DCMT 070202 T6215 indexable turning insert designed for stable machining of stainless steels in external and internal turning applications, offering a one-sided chipbreaker and ISO‑matched geometry for secure clamping and repeatable results. CVD-coated carbide grade T6215 for stainless steels Rhombic DCMT shape with 0.2 mm corner radius One-sided chipbreaker for controlled chips Cylindrical hole with single-side countersink High wear resistance for stainless-steel turning The insert features a CVD coating applied to a carbide substrate (grade T6215), which increases abrasion resistance and helps to reduce built-up edge when machining stainless steel. The coating and substrate combination delivers longer tool life under stable to lightly interrupted cuts, reducing tool changes and supporting predictable cycle times. This technical pairing is particularly effective where surface integrity and dimensional consistency are required. Improved chip control and surface finish A one-sided chipbreaker combined with the rhombic geometry provides controlled chip formation and evacuation, which supports consistent surface quality and reduces the risk of entanglement in bar or chucking operations. The 0.2 mm corner radius and the insert’s lead angle contribute to a balanced cut, helping to achieve the desired finish while avoiding excessive cutting forces. These features make the insert suitable for finishing and semi-finishing passes where chip form and surface integrity matter. Straightforward compatibility with ISO systems Compatibility with compatible toolholders is determined by form, relief angle (7°), tolerance class, fastening, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for secure clamping in standard indexable turning systems. Typical system components include a matched outside holder or boring bar, a locating shim, a clamp set and replacement screws, enabling fast installation and straightforward spare‑part management on the shop floor. Process stability and economical operation Designed for stable to lightly interrupted turning, the insert supports reproducible results and contributes to overall productivity by reducing unplanned stoppages. The standardised ISO designation ensures easy identification and replacement within existing tooling systems, allowing process planners to maintain stock logic and minimise downtime. The combination of predictable tool life and consistent performance makes this insert a cost‑effective choice for batch and series production. For application advice tailored to specific stainless‑steel grades or to secure fast delivery of Tungaloy DCMT 070202 T6215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for professional support and supply coordination. Technical data Article number: 6945239 Manufacturer SKU: TUN6945239 Supplier SKU: 6945239-Tungaloy ISO designation: DCMT070202 Grade: T6215 Numbers / Facts Thickness: 2.38 mm Size: 07 Corner radius: 0.2 mm Relief angle: 7° Lead angle: 55° Special features Material: carbide Coating: CVD Shape: rhombic Chipbreaker: one-sided Hole: cylindrical hole + single-side countersink (40°–60°) Typical application: external and internal turning of stainless steel FAQ What materials is this insert intended for? The Tungaloy DCMT 070202 T6215 insert is intended primarily for machining stainless steels under stable to lightly interrupted cutting conditions. How does the T6215 grade influence tool life? The T6215 CVD-coated carbide grade provides increased wear resistance and a reduced tendency for built-up edge, which extends usable tool life in stainless‑steel turning. Which holder features must be matched for correct mounting? Correct mounting requires matching the insert’s form, relief angle (7°), tolerance class, fastening method, size (07) and thickness (2.38 mm) to the chosen holder and clamping set. Is the insert suitable for finishing passes? Yes; the rhombic geometry, 0.2 mm corner radius and chipbreaker design support good surface quality during finishing and semi‑finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide for extended tool life with a rhombic 55° geometry and a 0.2 mm corner radius delivers repeatable performance for rostfreier Stahl turning under stable to mildly interrupted conditions; order the DCMT070202 T6215 insert directly via Metav Werkzeuge or consult the team for holder compatibility and mounting advice. DCMT 070202 T6215 — DCMT070202 Tungaloy turning insert, CVD-coated carbide, 55° The DCMT070202 T6215 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for rostfreier Stahl machining with a one-sided chipbreaker and a central hole for secure clamping. CVD-coated carbide for high wear resistance One-sided chipbreaker for controlled chips Rhombic 55° geometry for versatile turning ISO-compatible insert with central hole Consistent cutting life through coating and geometry The combination of a CVD-coated carbide grade and a defined rhombic profile provides wear resistance and thermal stability during medium-duty turning tasks. This coating increases resistance to abrasive and built-up edge mechanisms common when machining rostfreier Stahl, which helps maintain dimensional accuracy over longer tool life. The primary benefit is fewer index changes and more predictable production sequences, supporting continuous workflow and reduced setup frequency. Secure clamping and reliable chip control for shop-floor stability A central hole with a cylindrical bore and a one-sided countersink (40°–60°) ensures secure clamping and consistent seating in compatible toolholders. Paired with the one-sided chipbreaker, the insert promotes orderly chip control under stable cutting conditions, reducing the risk of entanglement and easing chip evacuation. The practical result is improved process reliability and simpler planning for downstream operations such as coolant management and part handling. Geometry tailored for finishing and medium cuts The rhombic shape with a 55° lead offers flexibility for both external and internal contours while the 0.2 mm corner radius balances edge strength with surface finish capability. With a plate thickness of 2.38 mm and size 07 designation, the insert provides a stable cutting edge for repeatable profiles; the modest corner radius supports finer surface quality without sacrificing robustness. Selecting a matching holder and setting conservative feeds will yield improved surface integrity and repeatable tolerances in serial work. Application guidance and matching to the machining system Designed primarily for turning, the grade T6215 is intended for rostfreier Stahl under stable to lightly interrupted cuts; choose the chipbreaker and grade according to material condition and machine rigidity. Compatibility with a specific holder depends on insert form, 7° clearance, tolerance class, fastening style, size and thickness — the system consists of the ISO insert, an appropriate external holder or boring bar, a support pad or clamp set and replacement screws. Proper torqueing and clean seating of the insert are practical steps that help achieve the advertised process stability and surface finish. For ordering and technical advice on mounting or selecting complementary holders, contact Metav Werkzeuge — Metav Werkzeuge can provide application support and delivery options to integrate the DCMT070202 T6215 into existing turning setups. Technical data Article number: 6903097 Manufacturer article number: 6903097 Manufacturer SKU: TUN6903097 METAV SKU: 6903097-Tungaloy Insert designation: DCMT070202 Grade/sort: T6215 Material: Carbide Facts Geometry (lead angle): 55° Corner radius: 0.2 mm Clearance angle: 7° Thickness: 2.38 mm Size: 07 Special features CVD coating One-sided chipbreaker Rhombic insert form Central hole with cylindrical bore and one-sided countersink (40°–60°) ISO-compatible indexable insert Application: Turning Suitable for rostfreier Stahl FAQ Which materials is this insert suitable for? The DCMT070202 T6215 insert is specified for rostfreier Stahl machining and performs best under stable to slightly interrupted turning conditions. What clamping and holder types are compatible? Compatibility depends on insert form, clearance angle, tolerance class, fastening style, size and thickness; the DCMT070202 fits ISO-standard external holders and boring bars that accept rhombic 07 inserts with a central hole. How does the T6215 grade affect tool life? The T6215 CVD-coated carbide grade improves wear resistance and thermal stability when turning rostfreier Stahl, which typically extends time between index changes and supports consistent surface finish. What cutting geometry benefits does the 55° lead provide? A 55° rhombic geometry offers versatility for external and internal contours, enabling accurate profile turning and balanced edge strength for finishing or medium cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215 and a 0.2 mm corner radius for reliable performance when machining stainless steels; the ISO geometry ensures straightforward integration into standard turning tool systems. Order the DCMT070202 T6215 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070202 T6215 Tungaloy indexable insert — CVD-coated carbide, 0.2 mm radius, for turning The DCMT070202 T6215 is an ISO rhombic indexable insert designed for external and internal turning, offering wear-resistant cutting performance for stainless steels in stable to lightly interrupted conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning Rhombic ISO DCMT070202 geometry 0.2 mm corner radius and 7° clearance angle High-performance cutting for stainless steels The combination of CVD-coated carbide and the T6215 grade delivers elevated wear resistance and consistent edge life under continuous and slightly interrupted cuts. This material pairing reduces flank wear and preserves the cutting edge, so cycle times remain predictable and tool changes can be scheduled more efficiently. For production environments where process stability and repeatability matter, the coating helps maintain cutting capability over prolonged runs, supporting improved overall equipment effectiveness. Precise geometry for consistent component quality The rhombic ISO DCMT070202 geometry with an included angle of 55°, a 0.2 mm corner radius and a 7° clearance angle provides a balance between sharpness and edge strength. The medium corner radius supports controlled chip formation while limiting burrs on stainless steel components, translating into better surface finish and reduced secondary operations. The insert’s 2.38 mm thickness and standard ISO form ensure mechanical stability in common turning holders, which simplifies tool selection and keeps clamping repeatable. System compatibility and operational benefits The insert is supplied with a cylindrical hole plus single-sided countersink (40°–60°) for secure location and fixing in compatible holders. Its one-sided chipbreaker is matched to the grade and typical turning conditions for stainless steels, promoting predictable chip flow and easing evacuation. As part of an ISO-indexed system—insert, holder, backing/clamp set and replacement screws—the component supports fast index changes and reduces downtime. The robust build and consistent metrics are ideally suited for job shops and production lines seeking economical, repeatable performance. For technical matching and stock enquiries for this Tungaloy indexable insert, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application-specific recommendations and availability Technical data Article number: 6945247 Manufacturer SKU: TUN6945247 SKU: 6945247-Tungaloy Model series: ISO indexable inserts Material: carbide Core specifications Geometry: DCMT070202 (ISO) Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Size: 07 Design and special features CVD-coated grade T6215 Rhombic insert form Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker Suitable for external and internal turning of stainless steels FAQ What materials is this insert suitable for? The DCMT070202 T6215 indexable insert is optimised for stainless steels; the CVD-coated T6215 grade provides improved wear resistance when turning such materials. Can the insert be used in standard ISO turning holders? Yes, the DCMT070202 geometry conforms to ISO standards and is compatible with holders designed for rhombic DCMT inserts, provided the holder matches the insert’s size, thickness and fastening type. How does the chipbreaker affect machining? The one-sided chipbreaker paired with the T6215 grade promotes controlled chip formation during turning operations, helping to maintain surface finish and reduce the risk of chip entanglement. What is the function of the countersunk hole in the insert? The cylindrical hole with a single-sided countersink (40°–60°) secures the insert in the pocket with reliable location and clamping, ensuring repeatable seating and ease of index changes. Is this insert suitable for interrupted cuts? The T6215 grade and insert geometry are designed for stable to lightly interrupted conditions; for heavy interruptions, evaluate stability and consider a grade or geometry specifically selected for tougher shock loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, secure clamping compatibility and easy integration into ISO toolholders for uninterrupted production. Order directly via Metav Werkzeuge or consult our experts for application-specific recommendations. DCMT070202 T9215 indexable insert for turning by Tungaloy — ISO rhombic, 7° clearance The DCMT070202 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for medium-duty steel machining and compatible with standard ISO holders and boring bars. ISO rhombic insert, 7° clearance angle T9215 CVD-coated carbide for steel Cylindrical hole with single-sided countersink Suitable for continuous and light interrupted cuts Productive performance for medium steel machining The DCMT070202 T9215 grade is a CVD-coated carbide insert engineered to combine wear resistance with fracture resistance, making it a reliable choice for sustained production. The CVD coating reduces adhesive wear and increases edge life, which in turn lowers tooling costs per component and reduces machine downtime. For turning tasks where continuous and light interrupted cuts are common, this cutting element offers consistent tool life and surface finish, so cycle times remain predictable and changeovers less frequent. Geometry and compatibility that ensure repeatable results The rhombic shape with a nominal 55° included angle and a 7° clearance angle gives stable cutting geometry and good access in shoulder and profile turning. A 0.2 mm corner radius balances edge strength with the achievable surface finish; the 2.38 mm plate thickness contributes to rigidity and heat resistance under load. Compatibility with the holder depends on form, clearance, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with a single-sided countersink (40°–60°) allows secure seating and repeatable clamping in matched ISO toolholders, which helps maintain cutting parameters and reduces the need for rework. System thinking: insertion, clamping and productivity This insert is intended to be used as part of an ISO insert system comprising a suitable external holder or boring bar, a supporting shim or clamping kit and replacement screws. Selecting the correct chipbreaker and grade for the workpiece and machining conditions is essential: the one-sided chipbreaker provided here supports reliable chip control in steel and contributes to stable cutting forces. Clear identification of the insert size (07) and ISO designation simplifies inventory management and tool presetting, supporting lean production practices and fast tool changes on the shop floor. Practical advice for shop-floor integration For best results, pair the insert with a holder dimensioned to accept ISO indexable plates of size 07 and check clamping torque against the holder manufacturer’s recommendations. The T9215 grade is particularly effective in medium-strength steels where productivity and edge security are required; in cases of heavy interruptions or hard inclusions, consider a more robust grade or reduced cutting data. The predictable behaviour of this insert reduces scrap and boosts first-pass yield, which benefits throughput and cost-efficiency. For reliable mid-range steel turning select the Tungaloy DCMT070202 T9215 insert and contact Metav Werkzeuge for tailored advice and rapid supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773999 Manufacturer SKU: TUN6773999 SKU: 6773999-Tungaloy Model series: ISO turning indexable inserts Designation: DCMT070202 T9215 Tungaloy insert Facts Corner radius: 0.2 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 55° Size: 07 ISO code: 070202 Special features Material: carbide Coating / grade: T9215 (CVD-coated) Plate shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Intended application: turning (external and internal) Typical use: medium steel machining, continuous to light interrupted cuts System components: ISO insert, compatible holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert best suited for? The DCMT070202 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide provides good wear and fracture resistance in typical steel turning tasks. Which holders are compatible with this insert? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the insert fits standard ISO holders sized for 07 plates and is secured via the cylindrical hole with a single-sided countersink. What chip control can be expected with this insert? The one-sided chipbreaker on this rhombic insert supports reliable chip evacuation in continuous and light interrupted cuts, improving machining stability and surface finish. How does the 0.2 mm corner radius affect machining outcomes? A 0.2 mm corner radius offers a compromise between edge strength and surface quality: it increases edge robustness while still delivering acceptable surface finish in general turning operations. Is this an indexable insert for internal turning as well as external turning? Yes, the ISO-format geometry and rhombic shape make the insert suitable for both external and internal turning operations when paired with an appropriate holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide and a focused geometry delivers high wear resistance and reliable fracture safety for productive medium-steel turning; compatibility with ISO holders ensures straightforward integration into existing tooling systems. Order the inserts directly via Metav Werkzeuge or consult the technical team for holder matching and process advice. DCMT 070202 T9215 ISO turning insert for medium steel — Tungaloy A DCMT070202 T9215 ISO-standard turning insert optimised for external and internal turning in medium steel, combining a CVD coating with a robust geometry for productive, continuous to slightly interrupted cuts CVD-coated carbide for wear resistance Optimised for medium steel machining Rhombic 07 shape with 55° included angle Single-sided chipbreaker with cylindrical hole Precision coating and material benefits for longer tool life The T9215 grade is a CVD-coated carbide designed as a first choice for medium steel machining. The chemical vapour deposition process produces a consistent, hard surface layer that significantly increases wear resistance while maintaining fracture toughness. For production environments this means fewer insert changes, longer tool life and more predictable process windows. The coating's performance at elevated temperatures supports higher cutting speeds and stable flank wear, which in turn contributes to consistent part quality and reduced downtime. Geometry and mounting that support secure, repeatable cuts This rhombic 07 insert offers a 55° included angle and a 7° clearance, providing a balance between cutting edge strength and accessibility in tight geometries. The corner radius of 0.2 mm and a plate thickness of 2.38 mm ensure rigidity where required, while the cylindrical hole with one-sided countersink (40°–60°) enables secure clamping in compatible ISO holders. Compatibility is determined by form, clearance angle, tolerance class, fixation method, size and thickness; match the insert form and tolerance to the chosen holder to guarantee repeatable seating and stable cutting conditions. Chip control and application guidance for efficient production A single-sided chipbreaker is integrated to control chip formation for typical turning operations on medium steel, improving surface finish and evacuation when conditions are stable. The insert is intended for continuous to slightly interrupted cuts; for heavily interrupted conditions or highly unstable setups, select a grade or geometry tailored to absorb higher mechanical shocks. Proper selection of the chipbreaker and matching cutting parameters delivers improved productivity, predictable insert life and fewer tool changes—advantages that translate directly into lower unit costs and smoother production flow. For procurement of Tungaloy turning inserts or advice on integrating the DCMT070202 T9215 into existing toolholders, contact Metav Werkzeuge for tailored recommendations and compatibility checks at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6777814 Manufacturer SKU: TUN6777814 Manufacturer: Tungaloy Material: Carbide Coating: CVD Series: ISO turning inserts Designation: DCMT070202 T9215 Facts Corner radius: 0.2 mm Plate thickness: 2.38 mm Free angle: 7° Included angle: 55° Size: 07 Hole style: cylindrical hole + one-sided countersink (40°–60°) Versions / Special features Rhombic plate form Single-sided chipbreaker ISO-standard for external and internal turning Suitable for medium steel machining Intended for continuous to slightly interrupted cuts Compatibility depends on holder form, fixation and tolerance class FAQ What materials is this insert designed for? The DCMT070202 T9215 insert from Tungaloy is specifically developed for medium steel machining and combines carbide and a CVD coating to provide wear resistance and fracture safety in these materials. What is the corner radius and plate thickness? The insert has a corner radius of 0.2 mm and a plate thickness of 2.38 mm, dimensions that support rigidity and repeatable clamping in ISO holders. Which holders are compatible with this insert? Compatibility depends on the holder's form, clearance angle, tolerance class, fixation and size; the DCMT070202 fits holders designed for rhombic 07 ISO inserts with a cylindrical-hole clamping system. How does the coating improve performance? The CVD coating on this carbide grade enhances wear resistance and thermal stability, allowing higher cutting speeds and more consistent flank-wear behaviour during medium-steel turning. Can this insert be used for interrupted cuts? The insert is suitable for continuous to slightly interrupted cuts; for severe interruptions, a tougher geometry or a different grade designed for interrupted cutting should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide and a 0.2 mm corner radius ensures productive, wear‑resistant turning with consistent surface finish; order the insert via Metav Werkzeuge or ask the technical consultants for application support. DCMT 070202 T9215 Tungaloy turning insert — CVD-coated carbide, 0.2 mm radius The DCMT070202 T9215 is a rhombic ISO turning insert suited for medium‑steel external and internal turning with a 55° geometry and a 7° clearance angle ISO rhombic insert, size 07 CVD-coated carbide grade T9215 0.2 mm corner radius for reliable finish Cylindrical hole + single-side countersink Boosted productivity for medium‑steel turning The CVD‑coated carbide grade brings together high wear resistance and fracture toughness, making the insert especially effective for continuous and lightly interrupted cuts. With a 0.2 mm corner radius the geometry supports stable contact and predictable tool life, while the 55° rhombic shape offers elevated cutting edge strength for general turning tasks. These characteristics translate into fewer tool changes, longer uninterrupted machining runs and more consistent component surfaces, which directly improves cycle times and shop throughput. Predictable chip control and secure clamping Designed with a one-sided chipbreaker and a cylindrical mounting hole with a single‑side countersink (40°–60°), the insert delivers consistent chip formation and repeatable seating in compatible holders. Clearances, tolerance class, fastening method, size and thickness determine holder compatibility, but the standardised ISO geometry simplifies selection and replacement. Reliable chip evacuation reduces rework and machine downtime, while secure clamping minimises vibration and the risk of edge chipping during heavier engagement. Easy integration into ISO tool systems and simpler process planning As part of an ISO model series for turning inserts, this grade is straightforward to specify in production settings where interchangeability and process repeatability matter. The CVD coating forms a hard, thermally stable layer on the substrate, improving oxidation resistance at elevated cutting temperatures and allowing competitive cutting speeds for medium‑hard steels. Clear, standard dimensions (size 07, thickness 2.38 mm, clearance 7°) make depth‑of‑cut and insert‑position settings more predictable, supporting faster setup times and more consistent quality across batches. For precise advice on toolholder compatibility or to request the DCMT070202 T9215 insert, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for tailored technical support and immediate availability Technical data Article number: 6777773 Manufacturer SKU: TUN6777773 SKU: 6777773-Tungaloy Model series: ISO turning inserts Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Grade/coating: T9215 Mounting: with hole Special features CVD-coated carbide One-sided chipbreaker Rhombic 55° geometry Cylindrical hole with single-side countersink (40°–60°) For external and internal turning FAQ What materials is this insert designed for? The grade T9215 is optimised for medium‑steel machining; the CVD‑coated carbide substrate provides wear resistance and toughness suitable for continuous to lightly interrupted cuts. Which holder features must match to ensure compatibility? Holder compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole with a single‑side countersink (40°–60°) must be matched to the holder design for secure seating. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius offers a balance between edge strength and surface quality: it smooths load peaks for stable cutting while producing consistent surface finishes in turning operations. Is the insert suitable for interrupted cuts? The insert is intended primarily for continuous and lightly interrupted cutting; its CVD coating and carbide substrate provide improved fracture resistance for such operations. Can this insert be used for internal turning? Yes, the rhombic 55° geometry and standardised ISO dimensions make the insert suitable for both external and internal turning when used with the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T9225 Wendeplatten - Tungaloy
Taking advantage of a robust CVD-coated carbide grade and an ISO‑compliant rhombic form results in consistent tool life and reliable chip control for medium to heavy steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT 070202 T9225 turning insert by Tungaloy — CVD-coated carbide, rhombic ISO insert The DCMT070202 T9225 is an ISO rhombic turning insert designed for external and internal turning where toughness and stable cutting performance are required. ISO rhombic insert DCMT070202 CVD-coated carbide grade T9225 7° clearance for secure chip control Cylindrical hole with single-side countersink Consistent cutting performance for medium to heavy steel The combination of CVD-coated carbide and the robust T9225 grade provides a dependable balance of wear resistance and toughness, making the insert suitable for variable engagement and slightly interrupted cuts. This formulation reduces flank wear and extends edge life, which translates into fewer tool changes and improved productivity in series turning. The rhombic geometry and ISO conformity ensure predictable cutting behaviour across standard tool holders. Straightforward system compatibility and faster setup Designed as an ISO turning insert, the item matches holders by form, clearance angle, tolerance class, fastening, size and thickness. The standardised format simplifies tool selection for workshops that use ISO tooling systems, shortening machine downtime during tool changes. The insert’s 07 size and secure central hole with single‑side countersink help achieve repeatable clamping and concentricity, contributing to consistent part quality across runs. Controlled chip formation and surface quality The single‑sided chipbreaker and the 0.2 mm nose radius combine to produce predictable chips and a balanced surface finish when machining steel. The small corner radius supports good edge strength while aiding fine surface results on external profiles and bore finishes. Choosing the appropriate chipbreaker and feed rate for the workpiece stability yields a measurable improvement in component consistency and reduces rework. Practical guidance for setup and application Use the insert together with a compatible external holder or boring bar, plus a suitable shim and clamping set; spare screws should be kept available to avoid unplanned interruptions. Match the insert geometry and the T9225 grade to the workpiece material and the machine’s rigidity: prioritise stability for heavier cuts and select lighter engagement for finishing passes. Regularly check clamping torque and seating to preserve repeatable accuracy and maximise service life. If the machining conditions are uncertain, use the universal grade for its wider material coverage. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and compatible holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781124 Manufacturer SKU: TUN6781124 SKU: 6781124-Tungaloy Model series: ISO turning inserts Type designation: DCMT070202 Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting edge angle: 55° Special features Shape: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Material/coating: CVD-coated carbide, grade T9225 Application: turning (external and internal) FAQ What materials is this insert best suited for? The DCMT070202 insert with Tungaloy’s T9225 grade is designed primarily for steel machining, offering a universal solution for medium to heavy steel turning. How does the insert ensure stable clamping? The rhombic form with a cylindrical hole and single‑side countersink provides stable seating and clamping repeatability when used with the appropriate ISO external holder and clamping set. Can the insert handle interrupted cuts? Yes, the T9225 grade and CVD coating deliver the toughness required for slightly interrupted cuts and variable engagement conditions common in turning operations. What surface finish can be expected with a 0.2 mm radius? A 0.2 mm corner radius supports a good compromise between edge strength and finish quality; it sustains load during heavier passes while enabling acceptable surface results on finishing passes. Which system components should accompany the insert? A suitable external holder or boring bar, a matching shim/clamping set and replacement screws are recommended to ensure correct seating and repeatable performance with the DCMT070202 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade that balances toughness and wear resistance, combined with an ISO‑compliant rhombic 07 geometry and a 7° relief for reliable seating and predictable cutting behaviour; these attributes support stable medium to heavy steel turning and reduced downtime. Order the DCMT070202 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 070202 T9225 – ISO turning insert for medium to heavy steel by Tungaloy DCMT070202 T9225 is an ISO‑standard indexable turning insert designed for external and internal turning in steel; suitable where interrupted cuts or variable engagement call for added toughness. ISO‑compliant rhombic 07 insert CVD‑coated carbide grade T9225 Designed for medium to heavy steel turning Cylindrical hole with 40°–60° countersink Consistent cutting performance under variable conditions The CVD‑coated carbide composition of this indexable insert offers a robust balance between wear resistance and fracture toughness, which is essential during medium to heavy steel machining. The T9225 grade is formulated for situations with variable engagement and light interruptions in the cut, providing consistent tool life and predictable flank wear. By choosing a universal grade, manufacturers can reduce tool inventory while maintaining performance across a range of workpiece conditions, so cycle times become more reliable and process planning is simpler. Secure clamping and straightforward integration into ISO tool systems The rhombic 07 shape with a 7° relief and a 55° lead angle ensures positive seating in compatible holders; compatibility depends on insert form, relief angle, tolerance class, fixation method, size and thickness. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), which enhances repeatable clamping and reduces micro‑movement under load. Integration into an existing turning system is therefore direct: pair the insert with the recommended external holder or boring bar and the appropriate shim/clamping set and fasteners for secure mounting and reproducible results. Improved productivity and surface quality for turning applications A one‑sided chipbreaker geometry aids chip control and evacuation, particularly in interrupted runs or depths typical of medium to heavy turning. The combination of grade and chipbreaker reduces the risk of built‑up edge and promotes consistent surface finish, meaning fewer reworks and less machine idle time. For production environments aiming to optimise throughput, the insert’s geometry and grade offer an economical route to stable cutting performance and extended periods between tool changes. Contact Metav Werkzeuge for availability of the Tungaloy DCMT070202 T9225 insert and application guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6781455 Manufacturer article number: 6781455 Manufacturer SKU: TUN6781455 SKU: 6781455-Tungaloy Item name: DCMT070202 T9225 Tungaloy insert Core specifications ISO code: 070202 Lead/approach angle: 55° Relief angle: 7° Plate thickness: 2.38 mm Corner radius: 0.2 mm Size: 07 Countersink angle: 40°–60° Design & features Material: carbide Coating: CVD Grade: T9225 Shape: rhombic Chipbreaker: one‑sided Hole: cylindrical with one‑side countersink Typical application: turning (external and internal) System assembly: ISO insert + matching external holder/boring bar, shim/clamping set and spare screws FAQ What machining tasks is this insert intended for? The DCMT070202 T9225 insert from Tungaloy is intended for external and internal turning, especially in medium to heavy steel machining where interrupted cuts or variable engagement require a tougher grade. How does the T9225 grade affect tool life? T9225 is a robust universal carbide grade with a CVD coating that improves wear resistance while offering sufficient toughness, which helps extend tool life under mixed or interrupted cutting conditions. Which holder features are required for correct fitment? Correct fitment requires a holder that matches the insert form, relief angle (7°), tolerance class, fixation method, size (07) and thickness (2.38 mm); the insert’s cylindrical hole with countersink supports repeatable clamping. Can the insert handle interrupted cuts? Yes. The T9225 grade is formulated to tolerate interrupted cuts and variable engagement, making the insert suitable for applications where occasional shock or fluctuation in chip formation occurs. What dimensions define the cutting geometry? Key dimensions include a 55° lead angle, 7° relief, 0.2 mm corner radius and a 2.38 mm plate thickness, which together determine the cutting behaviour and seating in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070202 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide T9225 grade and a 0.2 mm corner radius for reliable medium-to-heavy steel turning; the rhombic 55° geometry with a 7° relief ensures stable engagement and predictable chip control. Order the insert directly via Metav Werkzeuge or consult our technical advisors for compatibility and selection. DCMT 070202 T9225 Tungaloy turning insert — CVD-coated carbide, 0.2 mm radius A DCMT070202 T9225 rhombic ISO insert engineered for robust external and internal turning in medium-to-heavy steel applications. CVD-coated carbide grade T9225 0.2 mm corner radius for precise turning Rhombic 55° geometry, 7° relief Cylindrical hole with 40°–60° countersink Consistent productivity through robust grade and geometry The combination of a CVD-coated carbide substrate and the T9225 grade provides a balance of hardness and toughness suited to mixed chip loads and variable engagement. This configuration supports longer edge life under moderate to heavy cutting forces and reduces the frequency of tool changes, which improves uptime and throughput. The rhombic 55° geometry promotes secure clamping and a predictable cutting angle, which is particularly beneficial when operating on diverse workpieces or when light interruptions occur during turning. Improved surface quality and repeatability with defined radii A defined 0.2 mm corner radius delivers a reliable compromise between edge strength and surface finish, reducing chatter risk while maintaining dimensional control on turned parts. Combined with the 7° relief, the insert minimises rubbing and thermal buildup at the cutting edge, which translates into more consistent part tolerances and fewer rejects. For production environments where repeatability matters, this geometry supports tight process windows without extensive rework. Compatibility guidance and mounting considerations The insert conforms to ISO standards for turning plates; compatibility with a toolholder is determined by shape, relief angle, tolerance class, clamping style, size and thickness. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for reliable fixation in appropriate holders. When selecting the holder, ensure the support seat and clamping screw match the insert’s hole style and thickness so clamping forces are transmitted evenly and the cutter pocket tolerances are respected. Application advice and material suitability Designed as a universal, robust grade for steel, this insert performs well in medium-to-heavy turning of steels where occasional interruptions or varying depths of cut demand edge toughness. The one-sided chipbreaker aids chip control under typical turning conditions. For best results, match cutting parameters to the workpiece material and machine rigidity: the insert excels when the process aims for a balance of productivity and tool life rather than extreme light-finishing passes. For reliable replacement inserts and expert selection support, contact Metav Werkzeuge — our specialists will advise on holder matching and process settings for the Tungaloy T9225 grade Technical data Article number: 6781483 SKU: 6781483-Tungaloy Manufacturer SKU: TUN6781483 Manufacturer: Tungaloy Core data Model series: ISO turning inserts Designation: DCMT070202 Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Insert angle: 55° Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Design & features Material: carbide Coating/grade: T9225 (CVD-coated) Typical application: external and internal turning Suitable for medium-to-heavy steel and interrupted cuts Compatibility depends on form, clearance angle, tolerance class and clamping FAQ What materials is this insert suitable for? The DCMT070202 T9225 insert is designed primarily for medium-to-heavy steel turning; the T9225 CVD-coated carbide grade provides toughness for variable engagement and light interruptions. Which holders are compatible with this insert? Compatibility is determined by holder seat geometry, clamping style and tolerance class; choose a holder that matches the DCMT070202 plate form, 2.38 mm thickness and the cylindrical hole with countersink. How does the 0.2 mm corner radius affect finish and strength? A 0.2 mm corner radius improves edge strength while maintaining a good surface finish, making it suitable where both durability and dimensional control are required. Is this insert suitable for interrupted cuts? Yes, the robust T9225 grade and the insert geometry are chosen for resilience under interrupted cuts and variable cutting conditions. What information is needed to order the correct insert? Quote the DCMT070202 designation, grade T9225, and the SKU 6781483-Tungaloy to ensure correct ordering and to allow Metav Werkzeuge to verify holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, precise 55° rhombic geometry and a controlled single-sided chipbreaker to keep turning operations consistent and productive; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT 070204 AH120 Tungaloy — ISO indexable turning insert for turning, PVD-coated carbide DCMT070204 AH120 Tungaloy is an ISO-form indexable insert engineered for external and internal turning where a sharp cutting edge and process security are essential. PVD-coated carbide for wear resistance ISO 55° rhombic insert for versatile turning Single-sided chipbreaker for controlled chips Centrally bored with 40°–60° countersink Proven grade and coating for reliable tool life The AH120 grade, applied as a PVD coating on a carbide substrate, is designed to combine wear resistance with resistance to edge chipping. This results in longer tool life and more predictable performance in serial turning operations. By using a PVD layer, the cutting edge remains sharp for longer under fluctuating cutting conditions, which reduces downtime for insert changes and supports higher process uptime. For production environments seeking stability and repeatable results, this specification provides a measurable benefit in tool-change intervals and surface quality. Geometry and dimensions that simplify machine integration The 55° rhombic geometry and a 7° clearance angle make the insert well suited to common external and internal turning set-ups; the smaller lead angle balances cutting force distribution and allows access in tighter workpiece contours. A 0.4 mm nose radius offers a practical compromise between finishing and moderate stock removal, while the 2.38 mm plate thickness supports secure clamping and rigidity. The centrally bored design with a cylindrical hole and one-sided countersink (40°–60°) ensures compatibility with many ISO-standard holders; compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness, so selecting the correct holder and clamp set guarantees repeatable seating and safe operation. Operational benefits and typical applications Equipped with a single-sided chipbreaker, the insert promotes controlled chip formation and evacuation, which reduces the risk of built-up edge and improves surface finish on repetitive runs. Typical uses include general turning tasks — both roughing and finishing when the correct chipbreaker and grade are chosen for the material and stability of the set-up. The insert’s construction supports steady cutting forces and predictable wear, which helps maintain part tolerances and reduces scrap. For manufacturing lines that prioritise process security and consistent part quality, this insert offers a practical balance of performance and longevity. Speak to Metav Werkzeuge for tailored selection and application support for Tungaloy AH120 indexable inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss holder compatibility and the right chipbreaker for specific materials Technical data Article number: 6852450 SKU: 6852450-Tungaloy Manufacturer SKU: TUN6852450 Model series: ISO-Drehwendeschneidplatten Designation: DCMT070204 Facts Nose radius: 0.4 mm Plate thickness: 2.38 mm Insert size: 07 Relief angle: 7° Insert angle: 55° Special features Material: carbide Coating / grade: AH120, PVD-coated Plate form: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) ISO-standard indexable insert FAQ What materials is this insert intended for? The AH120 grade and PVD coating of the DCMT070204 insert provide a wear- and fracture-resistant cutting edge suitable for a wide range of turning tasks; the exact material suitability depends on selecting the appropriate chipbreaker and machining parameters for the workpiece material. How does the 55° rhombic geometry affect cutting performance? A 55° rhombic geometry offers a balance between strength and accessibility, allowing versatile external and internal turning with reduced cutting forces compared with sharper lead angles. What does the centrally bored design with countersink mean for clamping? The cylindrical bore with a one-sided countersink (40°–60°) ensures firm, repeatable seating in compatible ISO holders and simplifies replacement with standard screws and clamp sets. Which aspect of the insert most reduces downtime? The combination of PVD-coated carbide and the AH120 grade extends edge life and reduces the frequency of insert changes, contributing directly to reduced machine downtime. Can this insert be used for finishing operations? Yes — with the appropriate nose radius and stable set-up, the insert can deliver good surface finishes; the 0.4 mm radius is suitable for many finishing and semi-finishing tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide for durable cutting performance, a 0.4 mm corner radius for consistent surface quality, and ISO compatibility for straightforward tool changeovers. Order inserts or request advice from Metav Werkzeuge for a process-secure turning setup. DCMT 070204 AH120 – Turning indexable insert by Tungaloy, PVD-coated carbide, 55° DCMT 070204 AH120 is an ISO-designation indexable insert for turning, engineered for process reliability and a sharp cutting edge in demanding machining tasks PVD-coated carbide AH120 for wear resistance 0.4 mm corner radius for consistent finishes Rhombic 07 form with 55° approach angle Single-sided chipbreaker, with cylindrical hole Reliable chip control and extended edge life The insert’s PVD coating combined with the AH120 grade delivers a balance of wear resistance and toughness that stabilises the cutting edge. The single-sided chipbreaker is designed to guide chips predictably during turning operations, reducing the risk of vibration and edge chipping. For production environments this means fewer unexpected interruptions and more consistent component quality; the coating also helps to maintain cutting performance over longer tool life, which supports higher uptime and productive machining. ISO compatibility and secure clamping for quick changeovers Built to the ISO-series specification, the insert’s rhombic 07 geometry and the presence of a cylindrical hole with one-sided countersink (40°–60°) ensure secure seating in standard holders. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the 2.38 mm plate thickness and the 7° clearance angle are important for correct seating and repeatability. Using ISO-standard inserts simplifies inventory management and reduces setup time during insert changes, which is particularly advantageous in mixed-production or batch environments. Predictable surface quality and versatile turning performance The 0.4 mm corner radius and the 55° insert angle support a balance between strength and finish: a modest corner radius helps attain good surface texture while maintaining a reliable edge for finishing cuts. This design is suitable for both external and internal turning when the correct chipbreaker and cutting data are selected. For best results, pair the insert with a stable holder and appropriate feed and speed settings to exploit the grade’s process security and to achieve reproducible surface quality across repeated runs. For machining tasks that demand reliable edge life and predictable chip control, contact Metav Werkzeuge for specification guidance and to source the DCMT 070204 AH120 insert from Tungaloy; technical advice is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6818535 Manufacturer SKU: TUN6818535 SKU: 6818535-Tungaloy Model series: ISO indexable inserts Material: carbide Facts Corner radius: 0.4 mm Approach/lead angle: 55° Clearance angle: 7° Thickness: 2.38 mm Size: 07 Special features ISO designation: DCMT070204 Grade/coating: AH120, PVD-coated carbide Plate form: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ Is the DCMT 070204 AH120 suitable for finishing or roughing operations? The DCMT 070204 AH120 insert from Tungaloy is optimised for process security and a sharp cutting edge; it can be used for light finishing and stable medium cutting operations when the feed, speed and holder rigidity are matched to the task. Which holders are compatible with this ISO insert? Compatibility follows ISO standards: the insert’s form, 7° clearance, tolerance class, fastening method, 07 size and 2.38 mm thickness determine whether a specific external holder or boring bar accepts the DCMT 070204 AH120. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius improves edge strength while still permitting a fine surface finish; it is a compromise between robustness and the ability to achieve consistent surface quality in typical turning applications. What does the AH120 grade provide in practice? The AH120 PVD-coated carbide grade offers a combination of wear resistance and resistance to edge chipping, delivering stable performance during continuous turning operations under moderate cutting conditions. Can the insert be used for internal turning? Yes, the DCMT 070204 AH120 is suitable for internal turning when used with an appropriately sized and rigid boring bar that accommodates the rhombic 07 geometry and the insert’s thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade designed for stainless steel, the rhombic 55° geometry and proven chip control to sustain consistent medium-duty turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application-specific cutting data. DCMT 070204 AH6225 Tungaloy turning insert — ISO turning insert for Drehen A DCMT070204 AH6225 turning insert for external and internal turning that delivers a sharp, stable cutting edge optimised for rostfreie Stähle in changing machining conditions. PVD-coated carbide grade AH6225 Optimised for stainless steel machining 55° rhombic geometry for versatile turning Cylindrical hole with 40°–60° countersink Proven performance for stainless steel turning The insert is supplied in grade AH6225, a PVD-coated carbide composition developed for reliable performance when machining stainless steel. The coating improves wear resistance and thermal stability, which means the cutting edge remains effective over longer engagement times; this reduces tool changes and supports uninterrupted production. With an edge radius of 0.4 mm, the geometry balances finish quality and edge strength, making it suitable for medium cutting depths where a compromise between surface integrity and tool life is required. The result is a dependable insert that maintains consistent dimensional results under variable conditions. Secure geometry and straightforward mounting for stable cuts A rhombic 55° geometry provides versatility across both external and internal turning tasks, allowing effective approach angles while preserving flank support. The insert features a cylindrical hole with a one-sided countersink (40°–60°), which ensures secure clamping and repeatable seating in compatible holders; compatibility is determined by holder form, relief angle, tolerance class, fastening, size and thickness. The plate thickness of 2.38 mm gives robust support for the cutting edge, and the ISO designation simplifies selection for standard toolholders. These design elements combine to reduce vibration and improve cutting stability, leading to better surface finishes and predictable tool life. Practical application guidance and productivity benefits The single-sided chipbreaker and the combination of grade and geometry are intended to assist with chip control and process reliability during turning operations. For external and internal turning, select the chipbreaker and cutting parameters that match workpiece stability and material condition; this indexable insert is a solid choice where consistent performance with rostfreie Stähle is required. Where process optimisation is sought, matching the insert to an appropriate holder and adapting feed and speed will yield measurable productivity gains. If further cutting data or specific advice is required, Metav Werkzeuge provides application support by e‑mail and phone to help integrate the insert into the production process. Contact Metav Werkzeuge today for tailored cutting data, availability and to discuss the best holder- and parameter choices for the Tungaloy DCMT070204 AH6225 turning insert Technical data Article number: 6947697 Manufacturer SKU: TUN6947697 Item SKU: 6947697-Tungaloy Facts ISO designation: DCMT070204 Geometry: rhombic, 55° Corner radius: 0.4 mm Relief angle: 7° Insert size: 07 Thickness: 2.38 mm Hole style: cylindrical + single-side countersink (40°–60°) Grade/coating: AH6225 (PVD) Material: carbide Special features For turning (external and internal) Single-sided chipbreaker Suited to rostfreie Stähle Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness ISO‑standard indexable insert FAQ Is this insert suitable for internal turning operations? The DCMT070204 AH6225 insert is designed for both external and internal turning; its 55° rhombic geometry and reliable clamping hole allow use in appropriate internal toolholders when stability and tool access are sufficient. Which materials does the AH6225 grade work best with? The AH6225 PVD-coated carbide grade is optimised for rostfreie Stähle and performs well under medium-duty conditions where a sharp yet stable cutting edge is required. How does the hole and countersink style affect mounting? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure and repeatable seating in compatible holders; correct matching of holder form and tolerance class is essential for optimal clamping. What cutting edge radius is recommended for finishes and strength? This indexable insert features a 0.4 mm corner radius, which offers a practical balance between surface finish capability and edge robustness for general-purpose turning tasks. Can the DCMT070204 AH6225 be used interchangeably with other ISO inserts? The insert follows ISO dimensions, but interchangeability depends on holder relief angle, fastening method and plate thickness; ensure holder compatibility before substitution. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, PVD-coated carbide grade and a stable corner radius for consistent performance in stainless-steel turning; purchase directly via Metav Werkzeuge or consult the technical team for application advice. DCMT070204 AH6225 indexable insert for turning by Tungaloy — rhombic 07, 7° relief DCMT070204 AH6225 is an ISO-format indexable insert engineered for external and internal turning of stainless steels, offering a balanced mix of sharp cutting action and edge stability for medium machining conditions ISO rhombic insert, size 07 PVD-coated carbide grade AH6225 Single-sided chipbreaker for stable chips Compatible with standard DCMT holders, with hole Consistent edge life and reliable cut quality for stainless steels The PVD-coated carbide grade AH6225 is formulated as a universal solution for stainless steels, combining a sharp cutting geometry with enough edge support to resist premature wear. This balance reduces the risk of workpiece surface damage while maintaining productivity during medium-duty operations. The result is repeatable surface finish and predictable tool-change intervals, which supports planning and reduces downtime in batch production. The combination of coating and substrate improves heat resistance and adhesion, extending service life under variable cutting conditions. Clear compatibility and secure mounting reduce setup time Compatibility to a toolholder is defined by form, relief, tolerance class, clamping method, size and thickness; integration with existing DCMT-style holders is straightforward when these parameters match. The rhombic plate form with a 7° relief and a central hole with a single-sided countersink (40°–60°) allows positive locating and secure clamping in standard carriers. The presence of a countersunk hole ensures correct seat positioning and repeatable datum reference, simplifying calibration and toolpath verification in the workshop. Controlled chip formation and predictable cutting behaviour The single-sided chipbreaker and a 0.4 mm corner radius deliver controlled chip segmentation and a robust cutting edge for turnings where intermittent engagement or light finishing passes occur. Plate thickness of 2.38 mm contributes to insert rigidity, reducing vibration and improving dimensional stability. For applications that require switching between facing and external turning, the insert’s geometry and ISO conformity enable versatile use while maintaining consistent chip control and surface quality. Selection of chipbreaker and grade should be matched to material, machining strategy and machine stability for optimal results. Contact Metav Werkzeuge for tailored advice on Tungaloy inserts and to secure delivery or application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6829449 Manufacturer SKU: TUN6829449 Model series: ISO turning indexable inserts Name: DCMT070204 AH6225 Tungaloy insert Facts Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 55° Size designation: 07 Special features Material: carbide (hardmetal) Coating/grade: AH6225, PVD-coated carbide Plate form: rhombic Chipbreaker: single-sided Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning; compatible ISO indexable system FAQ What materials is this insert optimised for? The DCMT070204 AH6225 insert is optimised for stainless steels; the AH6225 PVD-coated carbide grade is tuned for sharp cutting and stable edge life when machining such materials. How does the hole and countersink affect mounting? The insert’s central hole with a single-sided countersink (40°–60°) ensures secure and repeatable seating in DCMT-compatible holders, improving positional accuracy and reducing setup variation. Which chipbreaker should be selected for mixed operations? A single-sided chipbreaker, as provided, offers good chip control across facing and external turning; choice of chipbreaker should be aligned with workpiece material, cutting speed and machine stability. Is the insert suitable for finishing passes? Yes — with a 0.4 mm corner radius and robust PVD-coated substrate, the insert supports medium finishing operations while maintaining surface quality and edge life. What ISO designation identifies this plate? The plate is identified as DCMT070204 in the ISO indexable insert system and fits holders designed for the DCMT form and size. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070204 AH6225 Wendeplatten - Tungaloy
Combine the PVD‑coated carbide grade AH6225 with a precise 55° geometry and a 0.4 mm corner radius to achieve reliable medium turning of rostfreier Stahl; excellent edge stability and consistent chip control reduce downtime. Order the insert directly via Metav Werkzeuge or consult our technical team for application optimisation. DCMT 070204 AH6225 indexable turning insert for turning by Tungaloy — PVD‑coated carbide, 55° The DCMT070204 AH6225 is an ISO rhombic indexable turning insert designed for external and internal turning, optimised for medium‑duty operations and variable cutting conditions. PVD‑coated carbide for edge stability Universal grade for rostfreier Stahl 55° geometry for reliable engagement 0.4 mm corner radius for versatile finishes Consistent medium‑machining performance that reduces cycle time The PVD‑coated carbide grade AH6225 delivers a sharp yet robust cutting edge, engineered for changing conditions commonly found in medium turning operations. The coating improves wear resistance and thermal stability, which prolongs tool life and maintains dimensional accuracy over longer runs. For production environments seeking stable performance without frequent insert changes, this indexable solution offers an efficient balance between cutting speed and tool life, helping to lower per‑part machining costs. Secure fit and compatibility for straightforward tool setup The insert follows ISO standards and a rhombic plate geometry, so holder compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The 55° main angle and 7° relief angle ensure predictable cutting forces and simple seat alignment. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping and accurate repeatability, reducing set‑up time and increasing process reliability across batch changes. Chip control and surface quality tuned for rostfreier Stahl A single‑sided chipbreaker combined with the 0.4 mm corner radius provides controlled chip formation and consistent surface finish in medium operations. The geometry supports smooth chip evacuation, lowering the risk of built‑up edge and improving surface integrity on rostfreier Stahl. For users less familiar with insert geometry, the corner radius influences both strength and finish: a 0.4 mm radius is a compromise that supports both robustness and good finishes without excessive cutting forces. Practical selection advice and maintenance tips When selecting a holder, match form and size to the insert dimensions to ensure correct rake and clearance angles; incorrect mating can negate the benefits of the PVD‑coated grade. Store spare inserts in a dry, organised system and inspect inserts visually for edge chipping before re‑use. For fluctuating production demands, the universal nature of this grade allows one insert type to be applied across several rostfreier Stahl families, simplifying inventory while maintaining process performance. Contact Metav Werkzeuge for tailored application advice and to source the DCMT070204 AH6225 indexable turning insert by Tungaloy; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6829446 Manufacturer SKU: TUN6829446 SKU: 6829446-Tungaloy Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.4 mm Thickness: 2.38 mm Main angle: 55° Relief angle: 7° Designs / Special features Rhombic plate, size 07 PVD‑coated carbide, grade AH6225 Single‑sided chipbreaker With hole; cylindrical hole + single‑sided countersink (40°–60°) Intended for external and internal turning Compatible with ISO‑standard insert holders Optimised for rostfreier Stahl FAQ What materials is this insert best suited for? The DCMT070204 AH6225 insert is a universal grade optimised for rostfreier Stahl and provides balanced performance for medium turning operations. How does the PVD coating benefit machining? The PVD‑coated carbide in the AH6225 grade increases wear resistance and thermal stability, which helps maintain edge life and consistent part quality when using the DCMT070204 insert. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; ensure holders accept an ISO rhombic size 07 plate with 2.38 mm thickness. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius on this insert balances edge strength and finish, enabling good surface quality during medium machining without excessive cutting forces. Is the insert suitable for both internal and external turning? Yes, the DCMT070204 AH6225 is designed for both external and internal turning applications when paired with a suitable holder and machining parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com