DCMT 070208 GT9530 Wendeplatten - Tungaloy
Fast, consistent finishing is achievable with the wear‑resistant GT9530 cermet grade and ISO‑compatible DCMT geometry; the 0.8 mm corner radius promotes a fine surface and steady tool engagement. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT070208 GT9530 indexable turning insert for turning, Tungaloy A DCMT070208 GT9530 indexable turning insert engineered for finishing to light general turning on steel, offering a coated cermet grade and ISO‑standard geometry for secure toolholder compatibility. Coated cermet GT9530 for improved wear resistance 0.8 mm corner radius for superior surface finish ISO DCMT 070208 geometry for broad holder compatibility Cylindrical hole with single‑side countersink for secure mounting Optimised wear behaviour for consistent finishing The coated cermet grade GT9530 delivers extended life in stable cutting conditions without sacrificing surface quality. As a finishing to light universal grade, it is formulated for low wear and good frictional characteristics, which results in reduced flank wear and fewer interruptions for insert changes. The combination of a wear‑resistant cutting material and a modest corner radius allows repeatable fine finishes on steels while maintaining cost efficiency through longer tool life. Assured fit and rapid setup with ISO compliance ISO‑standard geometry means the insert matches a wide range of holders when form, clearance angle, tolerance class, fastening method, size and thickness are aligned. The DCMT geometry with a 55° included angle and a 7° relief aids predictable cutting behaviour in many standard turning toolholders. The central cylindrical hole with single‑side countersink (40°–60°) ensures reliable clamping and repeatable seating, simplifying tool changeover and reducing set‑up time on CNC lathes. Practical application advice for stable machining Designed primarily for external and internal turning, the insert with a one‑sided chipbreaker supports controlled chip formation when a stable setup is available. For best results on steel, pair the grade and chipbreaker with an appropriately rigid toolholder and moderate feeds to exploit the fine edge properties of the cermet coating. Selection of chipbreaker and the correct holder geometry is decisive for optimising tool life and achieving the desired surface finish under the given process stability. For application advice or to procure DCMT070208 GT9530 inserts from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998324 Manufacturer SKU: TUN6998324 SKU: 6998324-Tungaloy Designation: DCMT070208 GT9530 Tungaloy insert Core data Size: 07 Thickness: 2.38 mm Relief/clearance angle: 7° Included angle: 55° Corner radius: 0.8 mm Special features Coated cermet grade GT9530 Rhombic insert shape (DCMT) One‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Intended application: external and internal turning on steel ISO‑standard insert for compatibility with matching holders FAQ What materials is this insert suitable for? The DCMT070208 GT9530 insert is intended primarily for turning of steel; the coated cermet GT9530 grade provides wear resistance and surface quality suited to finishing and light universal turning on common steels. How does the GT9530 grade differ from conventional carbide? GT9530 is a coated cermet designed to combine the edge stability of cermet with a protective coating, resulting in improved wear performance and surface finish compared with standard cemented carbide grades in finishing operations. Which holder features must match this insert for proper compatibility? Compatibility requires matching the DCMT form, the 7° relief (clearance) angle, tolerance class, fastening method and the insert thickness of 2.38 mm; the cylindrical hole with countersink must align with the holder’s clamping system for secure seating. Can this insert be used for roughing operations? The GT9530 grade is optimised for finishing to light general turning; for heavy roughing a more robust grade and a different geometry would be recommended to withstand higher mechanical loads. What is the benefit of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and surface finish, producing a fine machined face while offering sufficient edge integrity for steady cuts under stable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet longevity, precise ISO rhombic geometry and a fine 0.8 mm nose radius for consistent finishing in turning operations; order the insert through Metav Werkzeuge or consult the technical team for application support. DCMT070208 GT9530 rhombic turning insert for turning — Tungaloy The DCMT070208 GT9530 is an ISO-standard rhombic indexable turning insert intended for finishing and light general-purpose turning in steel under stable machining conditions. Coated cermet grade GT9530 for long tool life ISO rhombic DCMT070208 geometry 7° clearance angle for stable finishing 0.8 mm nose radius for superior surface finish High-quality finishing with extended wear resistance The coated cermet composition of this indexable insert delivers a balance between wear resistance and surface integrity. The GT9530 grade is designed for wear-resistant finishing and light universal applications in steel, providing longer component life under stable setups. The 0.8 mm nose radius reduces scallop height and enables improved visual and dimensional surface quality, translating into fewer downstream operations and a lower cost per part. This combination supports predictable machining cycles and contributes directly to production efficiency. Secure mounting and consistent repeatability Rhombic geometry and ISO conformity mean the insert integrates into standard tool systems with predictable seating and clamping behaviour. Compatibility with a holder depends on form, clearance, tolerance class, fastening, size and thickness — factors that ensure secure location and repeatable results. The 7° clearance minimises rubbing at the flank and improves tool life during finishing passes. The insert includes a cylindrical hole + single-side countersink (40°–60°) for reliable fixing, while the 2.38 mm plate thickness enhances rigidity in the cutting zone, reducing vibration and maintaining dimensional accuracy. Practical machining guidance for turning steel Intended for external and internal turning, this insert performs best when paired with an appropriate one-sided chipbreaker and stable tool overhang. The geometric choices suit finishing and light turning where surface quality and tool life are priorities; select the chipbreaker and grade according to workpiece material and machine stability. The insert is especially effective in stable set-ups where consistent cutting engagement is maintained, leading to fewer interruptions and more predictable process control. Where higher stability is present, feed and depth can be adjusted to favour productivity while retaining the desired finish. Integration into the tooling system and stock strategy The ISO designation simplifies procurement and inventory control by matching a recognised geometry to compatible holders, shims and clamping kits. Typical system components include the indexable insert, a compatible external holder or boring bar, a shim or clamping set, and replacement screws — all chosen to match the insert’s form, free angle and tolerance. Keeping a small selection of this grade and size on hand supports quick changeovers for finishing operations and reduces machine downtime, delivering a practical balance of availability and performance. For reliable finishing on steel components, request the Tungaloy DCMT070208 GT9530 indexable turning insert from Metav Werkzeuge or contact their technical team for machining recommendations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998341 SKU: 6998341-Tungaloy Manufacturer SKU: TUN6998341 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Nose radius: 0.8 mm Clearance angle: 7° Included angle: 55° Plate thickness: 2.38 mm Size: 07 ISO designation: 070208 Special features Grade/coating: GT9530 Cutting material: coated cermet Shape: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) Suitable for steel System components: insert, holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The DCMT070208 GT9530 insert is designed primarily for machining steel and is optimised for finishing and light universal turning under stable conditions. How does the GT9530 grade affect tool life and finish? The GT9530 coated cermet grade provides enhanced wear resistance and a fine surface finish, extending tool life in finishing applications while maintaining consistent component quality. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance, tolerance class, fastening method, size and thickness; the ISO rhombic DCMT070208 profile ensures fitment with standard ISO external holders and boring bars that accept rhombic inserts. What does the cylindrical hole with single-side countersink provide? The cylindrical hole + single-side countersink (40°–60°) offers secure clamping and precise location, improving repeatability and minimising movement under cutting forces. Is the DCMT070208 GT9530 suitable for internal turning? Yes, the insert is suitable for internal turning as well as external operations, particularly when a finishing pass is required and the machining set-up provides sufficient rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of the GT9530 coated cermet, the rhombic DCMT geometry and a 0.8 mm corner radius for improved surface finish and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. DCMT 070208 GT9530 indexable turning insert for turning — Tungaloy DCMT 070208 GT9530 is a coated cermet indexable insert optimised for finishing and light universal turning in steel, offering high wear resistance and consistent surface quality. Coated cermet grade GT9530 for steel Ideal for finishing and light general use Rhombic DCMT geometry, 55° relief angle Single-sided chipbreaker with bore and countersink Consistent finish and extended tool life with a wear-resistant cermet The GT9530 coating on a cemented carbide substrate delivers a balance between wear resistance and edge strength that is particularly suited to finishing operations in stable setups. This wear-resistant grade reduces flank wear and helps maintain dimensional accuracy over longer production runs, which translates into fewer tool changes and lower downtime. The improved edge integrity also promotes a superior surface finish, reducing rework and ensuring repeatable part quality for batch production. Geometry and clamping: predictable performance across holders The rhombic DCMT form with a 55° approach angle and a 7° clearance provides predictable chip flow and consistent engagement in external and internal turning. The single-sided chipbreaker is designed for light to finishing cuts and is combined with a central hole featuring a cylindrical bore and a one-sided countersink (40°–60°) for secure clamping. Compatibility with the toolholder is determined by insert form, clearance, tolerance class, fastening method, size and thickness; these parameters ensure repeatable seating and torque transfer when used with the appropriate external holder, shim and clamping screw. Practical application advice for reliable machining results Engineered for turning of steel under stable conditions, this indexable insert performs best when matched to a stable setup and the correct chipbreaker for the chosen feed and depth of cut. The 0.8 mm corner radius helps to blend surface peaks and improve part aesthetics while maintaining edge strength for light interrupted cuts. Select the appropriate chipbreaker and holder combination based on the component geometry and machining strategy to exploit the insert’s productive potential and achieve consistent cycle time and surface integrity. For machining tasks that prioritise surface quality and tool life, request the DCMT 070208 GT9530 from Metav Werkzeuge or contact our advisors for holder compatibility and application recommendations Technical data Article number: 6998336 Manufacturer SKU: TUN6998336 Model series: ISO turning indexable inserts Designation: DCMT070208 GT9530 Tungaloy Core specifications Corner radius: 0.8 mm Relief/clearance angle: 7° Approach/lead angle: 55° Plate thickness: 2.38 mm Size: 07 Design & features Coated cermet grade GT9530 Rhombic insert shape (DCMT) Single-sided chipbreaker Central hole: cylindrical bore with one-sided countersink (40°–60°) Intended application: turning (finishing to light general purpose) Substrate: cemented carbide FAQ What workpiece materials is this insert suited for? The DCMT 070208 GT9530 insert is specified for the machining of steel and is optimised for finishing and light universal turning when stable clamping and cutting conditions are provided. How does the GT9530 grade affect tool life and finish? GT9530 is a coated cermet designed for wear resistance and surface quality; the grade extends tool life under finishing conditions while producing consistent surface finishes on steel components. Which holders are compatible with this DCMT insert? Compatibility depends on the insert form, clearance, tolerance class, fastening, size and thickness; the DCMT geometry fits standard ISO external holders and appropriate clamping sets that accept size 07, 2.38 mm thick inserts. Can the insert be used for interrupted cuts? The 0.8 mm corner radius increases edge robustness, allowing limited interrupted cutting, but the grade and chipbreaker are optimised for finishing and light general-purpose use, so stable conditions are recommended for best performance. What is the significance of the central bore and countersink? The cylindrical bore with a one-sided countersink (40°–60°) secures the insert in the clamping system and ensures correct seating and repeatable orientation in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of cost-effectiveness, precise cermet cutting and straightforward holder compatibility to keep turning operations consistent and productive. Order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific setup. DCMT 070208 NS9530 — ISO turning insert for finishing, Tungaloy The DCMT 070208 NS9530 is an ISO rhombic insert engineered for precision external and internal turning, offering a cermet finishing grade optimised for continuous cuts. ISO rhombic 07 geometry Uncoated cermet NS9530 grade 0.8 mm corner radius Cylindrical hole with countersink Predictable surface quality from a cermet finishing grade The NS9530 uncoated cermet grade delivers a sharp cutting edge and low cutting forces, which together produce a high surface finish in finishing operations. The DCMT 070208 NS9530 insert is intended for continuous turning with small depths of cut, where consistent edge line and chip control reduce rework and downstream polishing. The material properties of the cermet contribute to stable cutting temperatures and improved dimensional consistency, supporting a measurable reduction in secondary operations and a more reliable production flow. Secure seating and ISO-based compatibility for reliable clamping As an ISO indexable insert in rhombic format, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. This insert has a 2.38 mm thickness, a 7° relief angle and a 0.8 mm corner radius, plus a cylindrical hole with a one-sided countersink (40°–60°) for positive seating. The single-sided chipbreaker supports predictable chip formation under steady feeds. These features combine to improve tool stability, reduce vibration and deliver repeatable clamping behaviour when matched with a suitable external holder, thereby lowering scrap rates and increasing throughput. Practical efficiency for steel finishing applications This finishing grade is formulated specifically for machining steel, providing sharpness and longevity for continuous finishing passes. The uncoated cermet composition emphasises surface quality and dimensional accuracy rather than aggressive stock removal, making it ideal where finish and tolerance are priorities. Operational benefits include stable chip formation, reduced cutting forces and a tendency toward consistent tool life when operated within recommended small depths of cut. For production planning, the insert supports streamlined processes and fewer adjustments between batches, contributing to overall shop-floor efficiency and predictable cycle times. Technical queries may be directed to Metav Werkzeuge specialists for help selecting the correct chipbreaker and holder combination. Contact Metav Werkzeuge for ordering and technical consultation on the Tungaloy DCMT 070208 NS9530 insert; product availability and application advice are provided by our specialists. Technical Data Article number: 6998480-Tungaloy Manufacturer article number: 6998480 Manufacturer SKU: TUN6998480 Brand: Tungaloy Model series: ISO turning indexable inserts Description: DCMT070208 NS9530 Tungaloy insert Facts Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 7° Size: 07 Angle: 55° Platen form: rhombic Special features Uncoated cermet grade NS9530 Rhombic geometry (DCMT) Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker ISO-standardised indexable insert Designed for finishing steel FAQ Is the insert compatible with standard DCMT holders? The DCMT 070208 NS9530 insert follows ISO indexing and is compatible with holders prepared for DCMT 07 geometry when form, relief angle, tolerance class, fastening, size and thickness are matched. Which materials is this grade suitable for? The NS9530 uncoated cermet grade is optimised for finishing steel, providing a sharp edge and low cutting forces for high surface quality in continuous turning. What are the key dimensions to check when selecting a holder? Confirm the 2.38 mm thickness, 07 size, 7° relief angle and the presence of a cylindrical hole with a one-sided countersink to ensure correct seating and clamping for this insert. Can the insert be used for internal turning as well as external turning? Yes; the insert is suitable for both external and internal turning when used with an appropriate holder and when cutting parameters are adapted for internal operations. How does the one-sided chipbreaker affect machining? The one-sided chipbreaker on this insert promotes controlled chip formation in finishing passes, supporting stable cutting and consistent surface quality for the DCMT 070208 NS9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing‑grade cermet insert that combines excellent surface finish, low cutting forces and predictable ISO compatibility for reliable turning operations; order directly via Metav Werkzeuge or consult our technical team for holder and grade selection. DCMT 070208 NS9530 Tungaloy – DCMT indexable turning insert for finishing The DCMT070208 NS9530 Tungaloy is an ISO rhombic indexable turning insert designed for precision external and internal turning on steel, optimised for continuous cuts and small depths of cut. ISO rhombic DCMT 070208 geometry NS9530 uncoated cermet finishing grade 0.8 mm corner radius for fine finish Single-sided chipbreaker, with hole and countersink High-quality finishing performance for steel components The DCMT070208 NS9530 insert is a finishing-grade, uncoated cermet designed to deliver a superior surface finish and reduced cutting forces during light-depth passes. The NS9530 grade provides a sharp cutting edge that is particularly effective on steel in continuous cutting conditions, enabling consistent part quality and reducing subsequent machining or polishing steps. By favouring small feedrates and controlled cutting speeds, this insert helps achieve tight surface tolerances while lowering the risk of built-up edge. The result is improved process efficiency and fewer rework cycles in routine turning operations. Predictable fit and secure clamping in ISO systems Compatibility with the clamping system is governed by geometry, ISO designation, relief angle, tolerance class, size and thickness; the DCMT form and 7° relief angle ensure a standard interface with matching indexable holders. The insert’s 2.38 mm thickness and central hole with a cylindrical hole plus one-sided countersink (40°–60°) provide secure fastening and repeatable positioning in approved holders. This standardisation reduces setup variability, shortens changeover time and supports stable toolpaths in production environments where reproducibility is essential for throughput and part conformity. Efficient chip control and reduced machining risk Equipped with a single-sided chipbreaker and a central fastening hole, this insert promotes reliable chip evacuation during finishing cuts. The chipforming geometry is tuned for low‑volume chips under small depths of cut, which lowers the likelihood of chip entanglement and prolongs uninterrupted running time. Coupled with a 0.8 mm corner radius, the insert balances edge strength and cutting delicacy, improving edge life while preserving fine surface quality. Selecting the matching chipbreaker and grade according to workpiece stability and cutting strategy yields measurable gains in productivity. Practical applications and workshop advantages This rhombic DCMT insert is intended for both external and internal turning where a high surface standard is required. Typical use cases include precision shaft turning, finishing bores and small passes on turned faces in steel components. The geometry and grade combination reduce the need for secondary finishing and support leaner machining sequences. For mixed production runs, the standard ISO form simplifies tool inventory management and allows quick replacement without extensive requalification, contributing to lower total machining costs. For tailored advice on integrating Tungaloy DCMT070208 NS9530 inserts into production—holder pairing, cutting-parameter recommendations and stock availability—contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical requirements and delivery options. Technical Data Manufacturer article number: 6998477 SKU: 6998477-Tungaloy Manufacturer SKU: TUN6998477 Brand: Tungaloy Model series: ISO indexable turning inserts WPL designation: DCMT070208 Label: DCMT070208 NS9530 Tungaloy insert Facts Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 7° Insert angle: 55° Plate size: 07 Special features Rhombic insert shape (DCMT) Uncoated cermet cutting material (NS9530) Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Typical system: ISO insert + compatible outer holder or boring bar, underlay/clamping set and replacement screws Suited for finishing cuts on steel FAQ Which materials is this insert best suited for? The DCMT070208 NS9530 insert is optimised for finishing on steel; the NS9530 uncoated cermet delivers a sharp edge and low cutting forces suitable for continuous cuts and small depths of cut. How is holder compatibility determined for this insert? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; the DCMT form with 7° relief angle and 2.38 mm thickness fits ISO rhombic holders designed for size 07 inserts. Can this insert be used for internal turning operations? Yes, the rhombic geometry and secure central fixing make the insert suitable for both external and internal turning tasks where finishing quality is required. What chip control features does the insert offer? The insert has a single-sided chipbreaker and a central hole with a countersink (40°–60°) to aid consistent chip formation and evacuation during finishing cuts. What edge radius is recommended for fine surface finish? The insert is supplied with a 0.8 mm corner radius, which is selected to provide a balance between a delicate cutting edge and sufficient edge strength for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated cermet NS9530, precise geometry and ISO compatibility for reliable finish turning of steels. Order directly via Metav Werkzeuge or consult the team for application advice and technical specification support. DCMT070208 NS9530 Tungaloy indexable insert for turning (ISO 070208) The DCMT070208 NS9530 is an ISO‑standard rhombic turning insert designed for finish turning of steel, offering a sharp cutting edge and low cutting forces for continuous cuts. Uncoated cermet grade NS9530 Sharp edge for superior surface finish ISO rhombic 07 form, 7° clearance Single‑sided chipbreaker, with hole Superior finish turning with low cutting forces The uncoated NS9530 cermet grade is engineered to deliver a high surface finish with reduced burr formation during continuous cutting and light cuts. The combination of a sharp cutting edge and the cermet cutting material lowers cutting forces and minimises subsurface deformation, which leads to more consistent part quality and fewer downstream finishing operations. This behaviour is particularly advantageous in applications requiring tight surface tolerances and repeatable results on standard steels. Predictable geometry for seamless toolholder integration Built to ISO dimensions, the insert features a rhombic 07 form, an included angle of 55° and a corner radius of 0.8 mm, while the plate thickness is 2.38 mm and the relief angle is 7°. These measurable attributes ensure precise fitment in standard indexable turning holders; compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness. The with hole design (cylindrical hole plus single‑side countersink 40°–60°) and the ISO coding simplify replacement and clamping in systems used for both external and internal turning. Efficient process performance and straightforward selection The single‑sided chipbreaker is tailored for stable chip control in continuous cuts and small depths of cut; match the chipbreaker and grade to workpiece material and machining stability for optimal results. The carbide construction provides a robust support for the cermet cutting edge, improving mechanical resistance during clamping and operation. Together, these characteristics contribute to a productive turning process with consistent tool life and reduced scrap rates, supporting efficient shopfloor operation and predictable machining cycles. Contact Metav Werkzeuge for tailored recommendations on the DCMT070208 NS9530 insert and to receive further technical data or application support from our specialists Technical Data Article number: 6998473 SKU: 6998473-Tungaloy Manufacturer SKU: TUN6998473 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Thickness: 2.38 mm Included angle: 55° Relief (clearance) angle: 7° Size: 07 Special features Grade NS9530 — uncoated cermet Material: carbide Plate form: rhombic Single‑sided chipbreaker Hole: cylindrical hole + single‑side countersink (40°–60°) ISO insert designation: DCMT070208 Application: external and internal turning FAQ What materials is this insert best suited for? The DCMT070208 NS9530 insert is designed as a finish grade for steel; the uncoated NS9530 cermet excels in continuous cutting on steel grades where a sharp edge and high surface quality are required. How does the insert secure to standard toolholders? The ISO‑standard geometry (size 07, 2.38 mm thickness, rhombic form and a cylindrical hole with countersink) allows the DCMT070208 insert to be fastened in compatible holders whose form, relief angle and tolerance class match the insert dimensions. Can the DCMT070208 NS9530 be used for both external and internal turning? Yes, the insert is suitable for both external and internal turning operations when matched with the appropriate holder and cutting parameters for the workpiece and stability. What are the key geometry values to consider when replacing an insert? Note the corner radius (0.8 mm), included angle (55°), relief angle (7°) and thickness (2.38 mm) of the DCMT070208 NS9530 to ensure correct fit and intended cutting performance. Which SKU identifies this specific product for ordering? Order using SKU 6998473-Tungaloy or manufacturer SKU TUN6998473 to ensure the correct DCMT070208 NS9530 Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated cermet cutting grade NS9530, a 0.8 mm corner radius and ISO conformity for reliable finishing performance; order the insert directly via Metav Werkzeuge or contact the consultants for application support. DCMT070208 NS9530 – ISO indexable turning insert, uncoated cermet, 0.8 mm radius (Tungaloy) The DCMT070208 NS9530 is an ISO rhombic indexable turning insert engineered for precision finishing in conventional turning operations. Uncoated cermet for superior surface finish 0.8 mm corner radius for fine contouring 7° clearance angle for reduced cutting forces Cylindrical hole with single-sided countersink High-precision finishing with low cutting forces The insert is manufactured as a finishing grade, featuring an uncoated cermet composition optimised for low cutting forces and a consistently sharp cutting edge. This configuration produces an outstanding surface finish on steel during continuous cuts and fine feed applications. The modest corner radius combined with the sharp edge results in reduced radial forces and less vibration, which supports dimensional stability and longer effective tool life in precision turning operations. ISO compatibility and system considerations for secure clamping Designed as an ISO-standard indexable insert, compatibility with the toolholder depends on several mechanical factors: form, clearance angle, tolerance class, mounting method, size and thickness. The rhombic 07 format and a cylindrical centre hole with a single-sided countersink (40°–60°) enable secure seating and repeatable indexing in common external holders and boring bars. Choosing the correct holder geometry and clamping set ensures reliable seat contact and consistent cutting performance across production runs. Application focus and operational benefits for turning steel This grade is tailored for turning where fine surface quality and sharp edges are required; the 0.8 mm corner radius is particularly suited to small depths of cut and finishing passes. The single-sided chipbreaker supports controlled chip formation for stable cutting when machining steels, while the ISO geometry facilitates quick replacement and indexation. In practice, the insert delivers predictable results in series production and single-part work where consistent surface integrity and process stability matter. Contact Metav Werkzeuge for tailored application advice or to check current availability of the Tungaloy DCMT070208 NS9530 indexable turning insert; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6945244 SKU: 6945244-Tungaloy Manufacturer SKU: TUN6945244 Numbers / Core technical data Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Geometry angle: 55° Size: 07 Designs / Special features ISO designation: DCMT070208 Cutting grade: NS9530 (uncoated cermet) Shape: rhombic Centre hole: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Body material: Hartmetall FAQ What materials is this insert intended for? The DCMT070208 NS9530 insert is specified as a finishing grade for steel; the NS9530 uncoated cermet delivers low cutting forces and a high surface quality when used for turning steel. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius gives finer contour definition and reduced vibration during finishing cuts, helping to achieve consistent dimensional accuracy with the Tungaloy indexable turning insert. Is this insert compatible with my ISO toolholder? Compatibility depends on holder form, clearance, tolerance class, mounting method, size and thickness; the DCMT070208 follows ISO geometry and fits holders designed for rhombic 07 inserts with the corresponding clamping system. What is the purpose of the centre hole and countersink? The central cylindrical hole with single-sided countersink (40°–60°) secures the insert with standard clamping screws, ensuring repeatable seating and safe indexing in turning holders. Can the insert be used for interrupted cuts or roughing? This uncoated cermet grade is optimised for finishing and continuous cuts with small depths of cut; for heavy interrupted or roughing applications, a different grade with a more robust chipformer would be recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet NS9530 with a sharp cutting edge and low cutting forces for consistent surface quality; compatibility is ensured by ISO geometry and standardised hole and thickness dimensions. Order directly via Metav Werkzeuge or consult their specialists for application advice. DCMT070208 NS9530 Tungaloy indexable turning insert — uncoated cermet, finish turning DCMT070208 NS9530 is an ISO rhombic indexable insert designed for precision finish turning of steel components with continuous cuts and small depths of cut. ISO rhombic insert, size 07 Uncoated cermet NS9530 for fine finishing 7° clearance angle for smooth cutting Cylindrical hole with single-sided countersink High-quality finishing through cermet technology The combination of an uncoated cermet grade and a sharp cutting edge provides markedly reduced cutting forces and improved surface finish in finishing operations. As an ISO-standardised turning insert, this geometry is produced to tight tolerances so that repeatable results are achieved when mounted in the appropriate holder. The NS9530 grade is tailored for fine turning of steel, enabling a consistent surface quality even on continuous cuts; the material’s wear characteristics are explained so that expected tool life can be assessed under typical finishing parameters. Geometry and mounting for reliable compatibility Compatibility with a given holder is determined by form, clearance angle, tolerance class, fixing method, size and thickness. This insert features a rhombic form, a 0.8 mm corner radius and a 7° clearance angle, together with a cylindrical hole and a single-sided countersink (40°–60°) to suit standard clamping systems. Because the dimensions follow ISO conventions, interchangeability is simplified and the correct clamp, shim or screw will ensure stable seating and repeatable indexing during production runs. Process benefits: efficiency and surface integrity The insert’s geometry and the NS9530 cermet combine to lower cutting forces and reduce vibration during finishing, which in turn supports higher feed stability and improved workpiece appearance. For precision components where surface integrity is critical, these characteristics translate into fewer downstream processes and more predictable throughput. Selection of an appropriate chipbreaker and adjustment of small depths of cut will further enhance process reliability and help to maximise the insert’s productive life. Recommended applications and cutting considerations Designed primarily for external and internal turning in steel, this insert performs best with continuous cutting and modest material removal rates. The 55° orientation supports access to interrupted profiles while maintaining a balanced cutting force vector. Typical recommendations include fine feeds and shallow depths to exploit the sharp edge and cermet’s affinity for high-quality finishes; coolant strategy and machine rigidity should be matched to the intended cycle to avoid thermal or mechanical shock to the cutting edge. For precision finishing with the Tungaloy NS9530 uncoated cermet insert, contact Metav Werkzeuge for availability and tailored application advice. Technical Data Article number: 6945257 SKU: 6945257-Tungaloy Manufacturer SKU: TUN6945257 Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT070208 Grade / Sort: NS9530 Facts Insert size: 07 Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Approach/lead angle: 55° Special features Material: cermet (uncoated) Plate form: rhombic Hole: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical use: external and internal turning Designed for finish turning and continuous cuts FAQ Which materials is this insert suitable for? The DCMT070208 NS9530 Tungaloy indexable insert is formulated for finishing operations in steel and is best used where a high surface quality is required. Can the insert be used for internal turning as well as external turning? Yes, the rhombic geometry and the 55° orientation allow the insert to be applied in both external and internal turning operations with proper tooling and holder selection. What are the key geometry details to check when selecting a holder? Check form, clearance angle (7°), thickness (2.38 mm), hole style (cylindrical with single-sided countersink) and size (07) to ensure compatibility with the chosen holder and clamping system. How does the NS9530 grade affect cutting parameters? The NS9530 uncoated cermet is optimised for low cutting forces and fine finishes; it performs best with shallow depths of cut and continuous feed conditions to exploit the sharp cutting edge. Is this insert suitable for interrupted cuts? While the insert can be used on profiles with occasional interruptions, best results are obtained in continuous cutting; assess machine stability and reduce the depth of cut for heavy interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting grade, proven ISO compatibility and a geometry engineered for consistent surface quality; the result is efficient finishing of steel components and reduced rework. Order original Tungaloy inserts via Metav Werkzeuge or contact the consultants for detailed application advice. DCMT070208 NS9530 Tungaloy indexable insert for turning — rhombic 07, 7° clearance The DCMT070208 NS9530 indexable insert is an ISO‑standard rhombic finishing grade designed for precision turning of steel components, offering a sharp cutting edge and low cutting forces for continuous cuts and high surface quality. Precision finishing grade NS9530 for steel Sharp cutting edge for low cutting forces Rhombic 07 form with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Improved surface finish and stable finishing performance The NS9530 cermet grade delivers a sharp cutting edge and is optimised for continuous cuts with small depths of cut, which directly reduces cutting forces and vibration. For finishing operations on steel, this results in a high surface quality and reduced need for subsequent machining steps. The uncoated cermet substrate combines hardness with edge stability, allowing reliable performance when producing tight tolerances and precision faces on turned components. Consistent clamping and ISO compatibility for predictable results The rhombic 07 form with a 0.8 mm corner radius and 7° clearance ensures repeatable contact and predictable engagement with compatible holders. The insert’s cylindrical hole plus one‑sided countersink (40°–60°) supports secure fastening and correct seating in standard ISO toolholders; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. This geometry simplifies insert selection and reduces set‑up time in series production. Productivity gains through chip control and tool life stability Equipped with a single‑sided chipbreaker, the insert produces controlled chips suitable for finishing passes, helping to avoid edge damage and improve process stability. The combination of the NS9530 grade and the rhombic geometry supports steady material removal in low‑force finishing cuts, which can increase throughput by limiting rework and component rejects. For workshop planners, this means fewer interruptions and a more predictable machining cycle time. Contact Metav Werkzeuge for availability and application support on Tungaloy DCMT070208 NS9530 finishing inserts — technical advice and supply are available from Metav Werkzeuge. Technical data Article number: 6998485 Manufacturer SKU: TUN6998485 Seller SKU: 6998485-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts ISO designation: DCMT070208 Facts Size: 07 Plate thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Tool angle: 55° Special features Cutting material: uncoated cermet (NS9530) Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Plate form: rhombic Primary application: turning (finishing for steel) FAQ What machining tasks is this insert best suited for? The DCMT070208 NS9530 insert is optimised for finishing operations in steel, providing a sharp edge and low cutting forces that are beneficial for continuous finishing cuts and achieving a high surface quality. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the DCMT070208 follows ISO standards and therefore fits holders designed for rhombic 07 ISO inserts with the specified seat and fastening. How does the NS9530 grade affect tool life and surface finish? The NS9530 uncoated cermet grade offers a combination of edge sharpness and stability that supports longer periods of consistent finishing and helps produce improved surface quality, particularly in continuous cut conditions. Is chip control an issue with this geometry? The single‑sided chipbreaker on the DCMT070208 is designed to produce controlled chips during finishing passes, improving process stability and reducing the risk of edge damage. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6998485 and the manufacturer SKU is TUN6998485 for the DCMT070208 NS9530 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 uncoated cermet grade and the precise DCMT070208 geometry — a 55° rhombic insert with a 0.8 mm corner radius — to achieve superior surface finish and low cutting forces in finishing turns; order directly via Metav Werkzeuge or consult our advisors for selection support. DCMT070208 NS9530 – Tungaloy indexable insert for turning (55° rhombic, R0.8) The DCMT070208 NS9530 is an ISO-standard rhombic indexable insert designed for finishing operations in steel, providing a sharp cutting edge and reduced cutting forces for continuous cuts and small depth-of-cut applications. ISO rhombic insert DCMT070208 NS9530 uncoated cermet for finishing 55° cutting angle; 0.8 mm corner radius Cylindrical hole with single-sided countersink Superior surface quality through a dedicated finishing grade The NS9530 uncoated cermet grade combines ceramic hardness with a metallic binder to maintain a sharp cutting edge during light finishing cuts. This composition reduces built-up edge and lowers cutting forces, which in turn supports a consistently high surface finish on steels. For operations that prioritise fine tolerance and low roughness, this grade is tailored to continuous cutting conditions and small feed rates, where edge integrity and minimal vibration directly improve productivity and part quality. Geometry engineered for stable clamping and predictable cutting The rhombic 55° geometry with a 7° clearance angle provides a balance between cutting accessibility and edge support. The 0.8 mm corner radius offers improved edge strength while still enabling fine surface generation; a larger radius would increase strength but risk deteriorating finish, whereas a smaller radius favours sharper profiles. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure secure clamping in compatible toolholders. Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness, so selection of the matching external holder or boring bar is essential for repeatable performance. Improved process efficiency and reliable chip control The single-sided chipbreaker geometry and the inherent wear characteristics of the cermet substrate reduce cutting forces and stabilise chip formation during finishing passes. Reduced forces lower spindle load and vibration, which prolongs tool life and helps maintain surface integrity over longer series runs. The carbide-based substrate underneath the cermet layer ensures mechanical strength at the cutting edge; together these design choices deliver efficiency gains in cycle time and consistent dimensional results when light cuts and high precision are required. Application guidance and selection advice for turning in steel Designed primarily for external and internal turning of steel, the insert performs best in finishing roles where continuous cutting and small depths of cut are expected. Choose the NS9530 grade and the single-sided chipbreaker when the priority is superior surface quality and low cutting forces. For interrupted cuts, higher toughness grades or different chipbreakers may be preferable. For straightforward holder pairing and to ensure secure mounting, verify the insert’s ISO designation and dimensions before ordering; the ISO-standard format simplifies replacement and inventory management while supporting flexible toolset-up across conventional turning operations. For finishing-oriented turning tasks, consider the Tungaloy NS9530 DCMT070208 insert — contact Metav Werkzeuge for tailored recommendations, availability and quick delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998466 Manufacturer SKU: TUN6998466 Model series: ISO turning indexable inserts Material: Carbide substrate (cermet grade NS9530) ISO designation: DCMT070208 Core specifications Cutting angle: 55° Clearance angle: 7° Corner radius: 0.8 mm Thickness: 2.38 mm Size: 07 Special features Uncoated NS9530 cermet finishing grade Rhombic shape (DCMT) Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Supplied for use in compatible external holders or boring bars Intended for finishing steel with continuous cuts FAQ What materials is this insert suitable for? The DCMT070208 NS9530 insert is specifically formulated for finishing operations in steel, where its NS9530 uncoated cermet grade provides a sharp edge and low cutting forces for superior surface finish. How does the corner radius affect performance? A 0.8 mm corner radius offers a balance between edge strength and finish quality; the radius helps distribute cutting stresses while still permitting the fine surface textures expected in finishing applications using this Tungaloy insert. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness; the DCMT070208 follows ISO standards, so matching an ISO-compatible external holder or boring bar with the correct clamp and screw will ensure secure mounting. Is the insert coated? No; the NS9530 grade is an uncoated cermet, chosen for its sharp cutting edge and low tendency to form built-up edge during finishing of steels. What is the purpose of the single-sided chipbreaker and countersunk hole? The single-sided chipbreaker optimises chip formation for finishing cuts, while the cylindrical hole with a single-sided countersink (40°–60°) ensures consistent clamping and repeatable positioning in suitable toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, ISO conformity and a compact rhombic geometry for consistent performance in cast-iron turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. DCMT 070208 T5115 turning insert (ISO) by Tungaloy — CVD-coated carbide, 55° rhombic A DCMT070208 T5115 indexable turning insert designed for general-purpose turning of cast iron, offering stable cutting edges and reliable chip control in ISO-format tool systems. CVD-coated carbide T5115 grade Optimised for cast iron machining Rhombic 55° geometry, 0.8 mm nose radius Single-sided chipbreaker with hole and countersink Consistent wear resistance for cast-iron turning The T5115 grade is a CVD-coated carbide developed as a universal solution for cast iron, combining wear resistance with edge stability. The chemical vapour deposition layer increases hardness at the surface while retaining a tough substrate, which reduces flank wear and extends tool life under interrupted cuts. As a result, operators benefit from longer tool life and fewer insert changes, which supports a more economical machining process and predictable production planning. Geometry that balances finish and strength A 55° rhombic outline and a 0.8 mm nose radius deliver a balance between cutting-edge strength and surface finish. The 55° geometry provides good access for both external and internal turning, while the moderate radius reduces the risk of edge chipping on unstable setups. The insert’s 7° clearance angle and 2.38 mm thickness contribute to a rigid cutting edge, improving dimensional stability and repeatability when paired with an appropriate holder. These geometric choices make the insert suitable for a wide range of turning tasks, from light finishing to more productive roughing passes. ISO system compatibility and practical assembly guidance As part of the ISO turning insert family, compatibility with toolholders depends on form, clearance angle, tolerance class, fastening style, size and thickness; select the matching holder, shim and clamping screws for secure mounting. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for positive clamping and straightforward replacement. For best results, match the single-sided chipbreaker to the workpiece and machining conditions: the chip control geometry reduces entanglement and improves evacuation when turning cast iron. The modular system—insert, holder, shim and fastener—ensures quick changeovers and minimal downtime in production environments. For reliable cast-iron turning with proven tool life, request a quote or technical evaluation from Metav Werkzeuge and contact our team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864771 Manufacturer SKU: TUN6864771 Manufacturer: Tungaloy Facts Nose radius: 0.8 mm Plate thickness: 2.38 mm Insert size: 07 Clearance angle: 7° Insert angle: 55° ISO designation: 070208 Special features CVD-coated carbide material Single-sided chipbreaker Rhombic plate shape With hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning Suitable for cast iron Model series: ISO turning indexable inserts FAQ What materials is this insert designed for? The insert is specified as a universal grade for cast iron machining; the T5115 CVD-coated carbide provides a balance of wear resistance and edge stability for grey and nodular cast irons. Can this insert be used for internal turning as well as external turning? Yes, the rhombic 55° geometry and ISO format allow use in both external and internal turning operations when the correct holder and clamping are selected. How does the chipbreaker affect machining performance? The single-sided chipbreaker on this insert improves chip control for cast iron, aiding evacuation and reducing re-cutting of chips, which supports surface quality and tool life. What must be considered when selecting a holder for this insert? Choose a holder that matches the insert’s form, clearance angle (7°), tolerance class, fastening method and plate thickness (2.38 mm) to ensure secure clamping and precise positioning. Is this an original Tungaloy product and how is it identified? Yes, this is an original Tungaloy indexable insert identified by article number 6864771 and manufacturer SKU TUN6864771, supplied as a new product. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T6215 Wendeplatten - Tungaloy
Benefit from high wear resistance, reliable chip control and easy integration into ISO tool systems; order the insert directly via Metav Werkzeuge or consult the team for holder compatibility. DCMT 070208 T6215 — Indexable turning insert by Tungaloy (for turning) DCMT 070208 T6215 is an ISO rhombic turning insert designed for stable to lightly interrupted turning of stainless steels, delivering consistent tool life and chip formation. CVD-coated carbide grade T6215 Suited to stainless steel turning operations Rhombic 07 geometry with 55° wedge angle Cylindrical hole with 40°–60° countersink Proven wear resistance for productive stainless-steel turning The CVD-coated carbide of grade T6215 ensures high wear resistance under stable cutting conditions, which translates into longer tool life and fewer indexings. As an indexable insert with ISO 07 geometry, it is optimised for turning operations where predictable performance is required. The controlled coating structure improves abrasion resistance and reduces flank wear, so machining cycles remain productive and downtime for tool changes is reduced. This benefit is particularly relevant in batch production and series machining where process stability matters most. Secure clamping and straightforward toolholder compatibility The insert’s rhombic 07 form, 55° wedge angle and defined relief angle (7°) allow precise seating in standard ISO holders; compatibility depends on form, clearance, tolerance class, fastening, size and thickness. The cylindrical hole with a single-sided countersink (40°–60°) provides stable fastening and repeatable positioning when used with matching carriers and clamping sets. Clear specification of geometry and thickness (2.38 mm) simplifies selection of a suitable outer holder or boring bar, supporting faster tool set-up and more predictable machining results. Controlled chip formation and reliable edge performance A single-sided chipbreaker matched to the cutting grade promotes stable chip formation during external and internal turning operations. The 0.8 mm corner radius balances edge strength and surface finish, allowing a compromise between robustness and fine part quality. In practice, this means fewer interruptions from built-up edge or edge chipping when machining corrosion-resistant alloys. The combination of insert geometry and chipbreaker design supports consistent surface quality and dimensional repeatability across production runs. Contact Metav Werkzeuge for tailored advice on toolholder pairing, order the DCMT 070208 T6215 insert by Tungaloy or request compatibility guidance from our technical consultants Technical data Article number: 6945238 Manufacturer SKU: TUN6945238 SKU: 6945238-Tungaloy Core specifications Material: Carbide Grade/coating: T6215 (CVD-coated carbide) Shape: Rhombic (07) Size: 07 Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 7° Wedge angle: 55° Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Features & applications ISO indexable turning insert series Intended use: external and internal turning Chipbreaker: one-sided Suitable for stainless steel under stable to slightly interrupted conditions System requires compatible outer holder, shim/ clamp set and replacement screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The DCMT 070208 T6215 insert by Tungaloy is designed primarily for machining stainless steel in stable to lightly interrupted turning operations. How does the T6215 grade improve tool life? The CVD-coated carbide T6215 offers enhanced abrasion resistance and edge stability, which extends service life and reduces the frequency of indexings for the insert. Which holders are compatible with this insert geometry? Compatibility is determined by the holder’s form, relief angle, tolerance class, fastening method, size and the insert thickness of 2.38 mm; use matching ISO rhombic 07 holders and the appropriate shim or clamp set. What chip control can be expected with this insert? The single-sided chipbreaker combined with the insert geometry promotes consistent chip formation and helps maintain surface quality during turning. Is this insert suitable for internal boring operations? Yes, the ISO rhombic form and balanced corner radius make the insert suitable for both external and internal turning when used with appropriate boring bars or holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for reliable machining of stainless steel combined with ISO conformity for straightforward tool-system matching. The insert’s 0.8 mm corner radius and 2.38 mm thickness deliver improved surface quality and mechanical stability, ensuring productive turning cycles—order directly via Metav Werkzeuge or consult our experts for holder compatibility and optimisation. DCMT 070208 T6215 – Indexable turning insert by Tungaloy (CVD-coated carbide, for stainless steel) DCMT070208 T6215 is an ISO rhombic indexable insert for external and internal turning of stainless steel, designed for stable to lightly interrupted cuts CVD-coated carbide grade T6215 for stainless steel ISO rhombic insert DCMT 07, 2.38 mm thick 7° relief angle, cylindrical hole with 40°–60° countersink 0.8 mm corner radius for fine surface finish Consistent machining performance and simple system integration The DCMT070208 insert is designed as part of an ISO-compliant turning system, ensuring interchangeability and predictable interaction with compatible holders and boring bars. Because compatibility depends on form, relief angle, tolerance class, mounting method, size and thickness, this ISO designation helps planners select the correct component quickly. The practical benefit is reduced setup time and more consistent cycle times in daily production, with fewer interruptions due to mismatched components. Durable grade and coating for stainless steel turning The insert’s CVD-coated carbide grade T6215 provides a wear-resistant cutting edge suited to the demands of machining stainless steel under stable or slightly interrupted conditions. A CVD coating increases hardness and thermal stability at the cutting zone, which translates into longer edge life and fewer tool changes. For operations sensitive to burrs and surface integrity, the combination of grade and coating supports a balance between tool life and finish quality. Geometry and clamping for reliable surface quality With a 0.8 mm corner radius and a 2.38 mm thickness, the insert offers mechanical robustness and the ability to produce fine surface finishes on turned components. The 7° relief angle reduces rubbing while maintaining cutting engagement; the insert’s cylindrical hole plus one-sided 40°–60° countersink ensures secure clamping and repeatable seating. Select a matching single-sided chipbreaker and the correct grade according to material and cut stability to achieve the ideal trade-off between material removal rate and surface integrity. For precise machining of stainless steel components, contact Metav Werkzeuge for availability and technical advice on matching holders and inserts for the Tungaloy DCMT070208 T6215 insert Technical Data Article number: 6903095 Manufacturer SKU: TUN6903095 Metav SKU: 6903095-Tungaloy ISO designation: DCMT070208 Name: DCMT070208 T6215 Tungaloy insert Dimensions / Core data Corner radius: 0.8 mm Plate thickness: 2.38 mm Plate size: 07 Relief angle: 7° Included angle: 55° Special features Material: carbide (Hartmetall) Coating/grade: T6215, CVD-coated Application: turning (external and internal) Hole style: cylindrical hole with one-sided 40°–60° countersink Chipbreaker: single-sided System: ISO indexable turning plates; compatibility by form, relief angle, tolerance class, mounting, size and thickness FAQ What materials is this insert suited for? The DCMT070208 T6215 insert is formulated for dependable machining of stainless steel and is best used where stable or lightly interrupted cuts occur. How does the T6215 coating improve performance? The CVD T6215 coating on the carbide substrate increases thermal resistance and edge hardness, extending tool life and reducing wear when turning stainless steel. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, mounting method, size and thickness; the DCMT070208 fits ISO rhombic holders sized for DCMT 07 inserts. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius offers improved surface quality and edge strength, making the insert suitable for parts where a finer finish is required without compromising stability. Is the insert suitable for interrupted cuts? The carbide grade and geometry are intended for stable to slightly interrupted cutting conditions; for heavy interruptions, a different geometry or grade may be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide wear resistance and the ISO rhombic DCMT 070208 geometry for stable stainless-steel turning; order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and process optimisation. DCMT070208 T6215 ISO turning insert for stainless steel by Tungaloy A DCMT070208 T6215 rhombic turning insert designed for external and internal turning of rostfreier Stahl under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 ISO rhombic insert DCMT 070208 7° clearance; 55° cutting angle Cylindrical hole with 40°–60° countersink Consistent wear resistance for uninterrupted production The CVD-coated carbide grade T6215 provides a high level of wear resistance, reducing flank and crater wear when machining stainless steel in steady conditions. This hard-wearing coating supports longer tool life and fewer index changes, which translates directly into reduced downtime and lower tooling costs per component. The layer composition is optimised for heat and abrasion resistance, which helps maintain cutting-edge geometry and consistent part tolerances over extended runs. Precise geometry for reliable holder matching and repeatable cuts The ISO rhombic form DCMT 070208 combines a 55° cutting angle with a 7° clearance, giving a balanced mix of strength and accessibility in turning operations. The insert’s 0.8 mm corner radius and 2.38 mm plate thickness deliver stable engagement and a defined cutting edge, while the cylindrical hole with 40°–60° countersink ensures secure clamping and consistent seat position in standard holders. Compatibility depends on holder form, clearance, tolerance class, fastening and size; Metav Werkzeuge can advise on the correct holder or shim set to achieve optimal clamping and runout control. Optimised chip control and surface quality for dependable parts A single-sided chipbreaker design promotes controlled chip formation for typical turning feeds, helping to protect the insert edge and improve surface finish. The insert sits within a system that includes a matched external holder or boring bar, a support shim/clamp set and replacement screws for secure assembly and quick service life changes. Together these elements support stable metal removal, predictable tool life and repeatable component quality—key factors for efficient production and reduced scrap rates. For application-specific recommendations on Tungaloy turning solutions and holder compatibility, contact Metav Werkzeuge to discuss the DCMT070208 T6215 insert and process parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6945256 SKU: 6945256-Tungaloy Manufacturer SKU: TUN6945256 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Application: Drehen Facts Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 55° Insert size: 07 Plate form: rhombic Hole style: cylindrical hole + 40°–60° countersink Special features CVD-coated carbide (T6215) Single-sided chipbreaker Suitable for rostfreier Stahl under stable to slightly interrupted cuts System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert designed for? The DCMT070208 T6215 insert by Tungaloy is formulated primarily for rostfreier Stahl (stainless steel) machining under stable to slightly interrupted cutting conditions. How does the chipbreaker affect process stability? The single-sided chipbreaker on the DCMT070208 T6215 helps produce short, manageable chips, improving process stability and surface finish while protecting the cutting edge. Which holder features are required for correct clamping? Correct holder compatibility for the DCMT070208 T6215 is determined by form, clearance, tolerance class, fastening, size and thickness; Metav Werkzeuge can advise on the matching external holder or boring bar. Can the insert be used for internal turning as well as external turning? Yes, the rhombic geometry of the DCMT070208 T6215 is suitable for both external and internal turning when the correct holder and clamping arrangement are used. What are the key dimensions to check when replacing an insert? When replacing an insert like the DCMT070208 T6215, check the plate thickness (2.38 mm), corner radius (0.8 mm), insert size (07) and hole/countersink configuration to ensure proper seating and clamp engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated cemented carbide grade engineered for stainless steel turning, a secure ISO‑compatible rhombic geometry, and a 0.8 mm nose radius that balances edge strength with profile control — all contributing to consistent, productive machining. Order the insert directly via Metav Werkzeuge or consult our technical advisors for specification advice. DCMT 070208 T6215 — Tungaloy turning insert (CVD‑coated cemented carbide, 7° relief) The DCMT 070208 T6215 is an ISO‑format, rhombic turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. *CVD‑coated cemented carbide grade T6215 *Optimised for stainless steel turning *Rhombic 55° geometry, 7° relief angle *Single‑sided chipbreaker, central hole with countersink Consistent cutting performance for stainless steels The CVD‑coated cemented carbide grade T6215 provides enhanced wear resistance and stable flank behaviour when machining stainless steel. The coating reduces adhesive wear and helps maintain a secure cutting edge under the elevated temperatures typical of austenitic stainless materials. As a result, the insert delivers longer effective life and fewer interruptions for index changes, which supports a more predictable production flow and reduced tooling costs. Secure clamping and ISO compatibility for straightforward setup Designed to ISO form 070208, the rhombic insert features a central cylindrical hole with a one‑sided countersink (40°–60°) that ensures positive location in most standard turning holders. The 55° included angle and 7° relief (clearance) angle are matched to widely used ISO holders, making holder selection and replacement straightforward. The recommended system includes the insert, an appropriate external holder or boring bar, shim/underlay and clamp kit, plus replacement screws for reliable fixture integrity. Productivity and economical machining through optimised geometry The single‑sided chipbreaker and 0.8 mm nose radius combine to promote controlled chip formation and a robust cutting edge. The moderate nose radius balances surface finish and edge strength: it supports consistent profile accuracy while resisting chipping in interrupted cuts. The insert is particularly suited to stable turning operations where consistent metal removal rates and long tool life are priorities, thereby reducing downtime and improving overall process economy. Practical guidance for application and selection This insert is intended for turning applications where the workpiece material and process stability match the grade’s capabilities. Typical uses include external finishing and semi‑finishing of stainless steel components and internal turning where holder rigidity is sufficient. Selection of the chipbreaker and mounting should be based on workpiece stability and the intended depth of cut: choose a more aggressive chip control for heavy continuous cuts, and favour stable clamping and lighter feeds for interrupted conditions. The insert’s ISO conformity simplifies cross‑reference and replacement in existing tool inventories. For reliable stainless steel turning with Tungaloy quality, request technical advice or place an order through Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility, cutting data and availability. Technical data Article number: 6903099 Manufacturer SKU: TUN6903099 SKU: 6903099-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Nose radius: 0.8 mm Included angle: 55° Relief (clearance) angle: 7° Plate thickness: 2.38 mm Size: 07 Special features CVD‑coated cemented carbide, grade T6215 Rhombic plate form Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) ISO‑standard geometry for holder compatibility Application: turning (external and internal) Suited to stainless steels under stable to slightly interrupted conditions System components: insert, external holder or boring bar, underlay/shim, clamp set, replacement screws FAQ Is this insert suitable for turning stainless steel? The DCMT 070208 T6215 insert from Tungaloy is formulated for stainless steel turning under stable to lightly interrupted conditions; the CVD coating and grade T6215 improve wear resistance and edge life in these applications. Which holders are compatible with this ISO insert? Compatibility follows ISO form 070208: the rhombic shape, 55° included angle and central hole with countersink ensure fitment with standard ISO turning holders and boring bars that accept DCMT‑format inserts. What cutting edge geometry should be chosen for finishing work? For improved surface finish, use a light depth of cut with a smaller feed and maintain the 0.8 mm nose radius; this radius supports a balance between surface quality and edge stability during finishing passes. How does the chipbreaker affect performance? The single‑sided chipbreaker is designed to control chips and aid evacuation in turning operations; pairing the chipbreaker style with appropriate cutting data enhances productivity and reduces risk of built‑up edge on stainless steel. What components form the complete tool system? A typical system comprises the indexable insert, a matching external holder or boring bar, underlay/shim and clamp set, plus replacement screws to ensure secure and repeatable mounting. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, precise 0.8 mm corner geometry, and ISO compatibility for consistent turning of stainless steel under stable to slightly interrupted conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT070208 T6215 Tungaloy — ISO rhombic turning insert for turning DCMT070208 T6215 is an ISO rhombic turning insert designed for reliable external and internal turning, offering a wear-resistant coating and chip control suited to stainless steel. CVD-coated carbide for wear resistance Designed for stainless steel machining 7° clearance for stable chip control 0.8 mm corner radius for finishing Increased process reliability through optimised coating and substrate The insert combines a CVD-coated surface with a robust carbide substrate to extend tool life under continuous and slightly interrupted cuts. This pairing reduces flank wear and maintains cutting-edge integrity, which leads to fewer tool changes and more predictable batch processing. The coating technology supports consistent performance when machining stainless steel, improving component repeatability and reducing scrap rates. The result is measurable productivity gains in routine turning operations. Precise geometry for controlled chips and better surface finish The rhombic geometry with a 55° included angle and a 0.8 mm corner radius helps to balance strength and finish capability. The 7° clearance angle contributes to reliable chip flow and lowers built-up edge risk when cutting challenging alloys. The one-sided chipbreaker is shaped to promote controllable, segmented chips under stable cutting conditions, simplifying chip evacuation in lathes and reducing the likelihood of recut chips. These attributes translate into improved surface quality and fewer secondary operations. Compatibility and selection guidance for efficient integration As an ISO-format indexable insert, compatibility with holders depends on form, relief angle, tolerance class, fastening, size and thickness. The insert includes a cylindrical locating hole with a single-sided countersink (40°–60°), enabling secure clamping in standard shoulder-style toolholders. When selecting the correct grade and chipbreaker, match the T6215 wear-resistant grade to workpiece stability and the required surface finish. The insert is intended primarily for turning applications and integrates easily into established tool assemblies for rapid replacement and minimal setup time. Contact Metav Werkzeuge for tailored cutting-data recommendations, availability of the DCMT070208 T6215 Tungaloy insert and guidance on holder compatibility — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6945243 SKU: 6945243-Tungaloy Manufacturer SKU: TUN6945243 Facts Size: 07 Corner radius: 0.8 mm Clearance angle: 7° Included angle: 55° Thickness: 2.38 mm Special features ISO rhombic insert series CVD-coated carbide One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Rhombic plate form FAQ What materials is this insert best suited for? The DCMT070208 T6215 insert is specified for machining stainless steel and performs well under stable to slightly interrupted turning conditions. How does the T6215 grade help in production? The T6215 grade offers a wear-resistant, CVD-coated carbide composition that extends tool life and maintains cutting edge stability for consistent batch processing. Is the insert compatible with standard ISO toolholders? Compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness; the DCMT070208 fits standard ISO rhombic holders that accept a 07-size insert and a 2.38 mm thickness. What role does the 0.8 mm radius play in results? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, aiding in achieving good part quality without sacrificing durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, precise geometry and reliable chip control for efficient turning operations; the ISO compatibility and sturdy clamping ensure repeatable quality and minimal downtime. Order suitable inserts and matching holders directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCMT070208 T9215 indexable turning insert — CVD‑coated carbide, 0.8 mm radius (Tungaloy) DCMT070208 T9215 is a rhombic ISO turning insert designed for medium steel machining and general external and internal turning applications CVD-coated carbide grade T9215 ISO rhombic insert DCMT070208 0.8 mm corner radius for accuracy Single-sided chipbreaker, with hole Increased productivity through wear-resistant coating and grade The CVD-coated carbide grade T9215 delivers a balance of wear resistance and fracture toughness, making it well suited to continuous and lightly interrupted cuts typical of medium steel machining. This results in fewer tool changes and more predictable cycle times, which lifts process throughput and reduces per‑part cost. The coating improves thermal stability at elevated cutting speeds, helping to maintain cutting edge geometry and consistent surface finish over longer runs. Precision geometry and straightforward ISO compatibility A rhombic form with a 0.8 mm corner radius and 7° clearance enables stable cutting and accurate profile control in many turning operations. The insert conforms to ISO dimensions, so compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness — the typical ISO system components are insert, external holder or boring bar, shim/clamp set and replacement screws. The DCMT070208 geometry provides straightforward interchangeability within ISO tooling systems and supports repeatable set‑ups on production equipment. Controlled chips and reliable edge life for consistent results The single-sided chipbreaker is engineered for effective chip control when machining steels; it promotes short, controllable chips that evacuate reliably from the cutting zone. As a result, surface quality improves and the risk of built‑up edge or chip re‑cutting is reduced. Better chip control also contributes to tool life, decreasing unplanned stops and improving overall process stability — a direct benefit to batch consistency and downstream operations. Simple integration and secure clamping for repeatable performance Mounting is secure thanks to the hole with cylindrical bore and one-sided countersink (40°–60°) which ensures firm seating and stabilised clamping forces during turning. The insert thickness of 2.38 mm and ISO size 07 allow robust engagement in compatible holders, helping to reduce vibration and deflection. For best results, pair the insert with an appropriately rated external holder or boring bar and select cutting data that match material properties and machine rigidity. If uncertainty remains about holder selection or cutting parameters, technical advice is recommended. Contact Metav Werkzeuge for tailored holder recommendations, cutting data and delivery options for the Tungaloy T9215 DCMT070208 insert — our specialists will provide application‑specific support and rapid supply solutions. Technical data Article number: 6774044 Manufacturer SKU: TUN6774044 SKU: 6774044-Tungaloy Model series: ISO turning inserts Type designation: DCMT070208 Grade / coating: T9215 (CVD-coated carbide) Material: carbide Facts Geometry: rhombic, size 07 Corner radius: 0.8 mm Clearance angle: 7° Thickness: 2.38 mm Hole: with cylindrical hole + one-sided countersink (40°–60°) Special features Single-sided chipbreaker Suited for medium steel turning Application: external and internal turning Compatible system: insert + holder/boring bar + shim/clamp set + screws FAQ What materials is this insert suitable for? The DCMT070208 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to slightly interrupted cutting when turning steel. How does the T9215 coating benefit production? The CVD-coated T9215 grade on the DCMT070208 improves thermal stability and wear resistance, extending cutting edge life and supporting higher productivity in repetitive turning operations. Which geometry details affect holder compatibility? Holder compatibility depends on form, clearance, tolerance class, fixing method, size and thickness; the rhombic shape, 7° clearance and 2.38 mm thickness of this insert must match the chosen external holder or boring bar. Can this insert be used for interrupted cuts? The T9215 grade is suitable for continuous to lightly interrupted cuts; for heavy interruptions, a different geometry or a tougher grade may be recommended for the specific application. What chip control can be expected with this insert? The single-sided chipbreaker on the DCMT070208 promotes short, controllable chips during steel turning, improving evacuation from the cutting zone and enhancing surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide T9215 wear resistance with a rhombic geometry and a 0.8 mm corner radius, this insert delivers high productivity for medium-steel turning while maintaining fracture resistance. Order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and cutting-parameter recommendations. DCMT070208 T9215 turning insert by Tungaloy — rhombic ISO insert for medium-steel turning DCMT070208 T9215 is an ISO-indexable turning insert designed for external and internal turning operations, optimised for productive machining of medium steels with continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic 07 form with 55° cutting angle Cylindrical hole with 40°–60° countersink High productivity and wear resistance for medium-steel turning The CVD-coated carbide T9215 grade combines high wear resistance with reliable edge strength, making it a preferred choice for productive turning operations in medium steels. The coating improves abrasion resistance and heat stability, which extends tool life in continuous cutting and under light interruptions. Selecting this grade reduces tool changes and supports consistent cycle times, which is particularly valuable in batch production and subcontract machining environments. Precise geometry and compatibility that simplify tool selection Featuring a rhombic 07 form and a 55° cutting angle, the insert provides predictable chip flow and stable contact conditions. The 0.8 mm corner radius delivers a balance between edge strength and surface finish, enabling slightly higher feed rates without sacrificing part quality. The ISO designation and standard hole geometry mean compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness, so the insert integrates easily into existing tool systems with matched holders and clamping sets. Practical application guidance for reliable results For external and internal turning, pair this insert with a suitable external holder or boring bar and ensure the backing pads and clamping screws match the ISO interface. The single-sided chipbreaker and one-sided cutter geometry favour chip control when machining medium steels; set feeds and speeds to account for continuous or lightly interrupted cuts to maintain stability. When using the DCMT070208 T9215 insert, monitor tool wear for predictable replacement intervals and adjust parameters to extend productive tool life while maintaining surface quality. For tailored recommendations on holder compatibility and cutting parameters for the T9215 grade, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt technical support and supply. Technical data Article number: 6772449 Manufacturer article number: 6772449 SKU (manufacturer): TUN6772449 SKU: 6772449-Tungaloy Facts Radius: 0.8 mm Cutting angle: 55° Clearance angle: 7° Plate thickness: 2.38 mm Size: 07 Special features ISO designation: DCMT070208 Grade/coating: T9215, CVD-coated carbide Plate form: rhombic Chipbreaker: one-sided Hole: with hole, cylindrical hole + one-sided countersink (40°–60°) Application: turning System components: insert, matching external holder or boring bar, backing pad/clamping set, spare screws FAQ What materials is this insert intended for? The DCMT070208 T9215 insert is optimised for medium steel machining; the T9215 grade offers a balance of wear resistance and edge strength for productive turning. Which cutting conditions suit this insert best? The insert performs well in continuous to lightly interrupted cuts; set conservative parameters when interruptions or unstable setups are present to preserve edge life. How does the chipbreaker affect machining? The one-sided chipbreaker improves chip control for turning operations in medium steels, helping to maintain process reliability and surface finish with predictable chip formation. Is the insert compatible with standard ISO holders? Yes—compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness; use matched holders and clamping sets for secure fixation. What is the recommended corner radius for general finishing and roughing? The 0.8 mm corner radius provides a compromise between edge strength and surface finish; for heavy roughing a larger radius is preferable, while smaller radii favour fine finishing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T9215, a rhombic 55° geometry and a secure clamping design to maximise productivity in medium-steel turning; order the DCMT070208 T9215 indexable insert directly via Metav Werkzeuge or ask the consultants for holder compatibility and application advice. DCMT070208 T9215 indexable turning insert – Tungaloy A DCMT070208 T9215 indexable insert engineered for productive medium-steel turning with a rhombic 55° profile and a single-sided chipbreaker. CVD-coated carbide grade T9215 Rhombic 55° geometry, 7° clearance 0.8 mm corner radius for stable finish Cylindrical hole with single-sided countersink Boosted productivity for medium-steel turning The CVD-coated T9215 grade combines high wear resistance with edge toughness, making this carbide insert particularly well suited to continuous and light interrupted cuts on medium steels. The coating system reduces crater and flank wear while retaining a robust cutting edge, which supports longer tool life and more consistent cycle times in production environments. Choosing this grade helps maintain throughput without sacrificing component quality, reducing downtime associated with premature edge failure. Geometry that delivers repeatable surface quality The rhombic 55° approach angle and a clearance of 7° are chosen to balance cutting forces and accessibility for external and internal turning operations. The 0.8 mm corner radius provides a compromise between strength and surface finish: it increases edge durability under load while producing a controllable surface texture. In less rigid setups the geometry helps avoid chatter and deflection; in stable, well-clamped machines it enables tighter tolerances with fewer insert changes, supporting reliable, repeatable results. Secure clamping and clear system compatibility rules Compatibility with the toolholder is defined by form, clearance angle, tolerance class, attachment, size and thickness. This insert features a cylindrical hole with a single-sided countersink (40°–60°) and a plate thickness of 2.38 mm, so matching the pocket geometry and screw type on the chosen holder is essential. Proper use of the recommended underlay/clamp set and replacement screws ensures correct seat and torque, which reduces the risk of movement and edge damage during machining. Practical guidance for operation and life-cycle management As an indexable insert with a single-sided chipbreaker, this grade offers multiple indexed cutting edges, lowering the cost per usable edge and simplifying tool management. Select a chipbreaker and cutting data tuned to workpiece material and machining stability to get the best balance of metal removal rate and edge life. If there is uncertainty about feed, speed or holder fitment, technical documentation and process recommendations are available to support machining decisions; monitoring flank wear and re-indexing before breakage keeps production predictable and safe. If further data is required, the Metav Werkzeuge team can advise on cutting parameters and holder matches. For precise compatibility checks or application advice on the Tungaloy DCMT070208 T9215 indexable insert, contact Metav Werkzeuge for technical consultation or to request detailed data sheets at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6777816 Manufacturer SKU: TUN6777816 Model series: ISO turning indexable inserts Name: DCMT070208 T9215 Core specifications Size: 07 Plate thickness: 2.38 mm Clearance angle: 7° Insert angle: 55° Corner radius: 0.8 mm Design & features CVD-coated carbide Grade T9215 Rhombic plate shape Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker ISO-compliant turning insert Recommended application: medium steel System components: matching outer holder, underlay/clamp set, spare screws FAQ Which materials is this insert suitable for? The DCMT070208 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 balances wear resistance and fracture toughness for productive turning of these materials. How to ensure holder compatibility with this insert? Check the holder pocket for matching form, clearance angle, tolerance class, attachment method, size 07 pockets and a seat for a 2.38 mm thick insert; the DCMT070208 requires a clamping system compatible with its cylindrical hole and countersink. What does the T9215 grade indicate? T9215 denotes a CVD-coated carbide specification designed for medium-steel applications, offering a combination of high wear resistance and good resistance to edge breakage for productive cutting. Is this insert suitable for interrupted cuts? The insert is intended for continuous to light interrupted cutting; for heavy interrupted cuts a grade and chipbreaker tailored to high impact conditions should be considered. What is the hole style and how should it be clamped? The insert has a cylindrical hole with a single-sided countersink (40°–60°); secure clamping using the correct underlay/clamp set and replacement screws is recommended to ensure stable seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture toughness and ISO compatibility for consistent medium‑steel turning productivity; order directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT 070208 T9215 indexable turning insert by Tungaloy — CVD‑coated carbide, rhombic 07, 55° A DCMT 070208 T9215 indexable insert designed for medium‑steel turning, suitable for both external and internal turning with a single‑sided chipbreaker and cylindrical hole with countersink. CVD‑coated carbide T9215 — high wear resistance Rhombic 07 geometry with 55° cutting angle 0.8 mm nose radius for precise profile control Cylindrical hole with single‑side countersink Proven productivity for medium‑steel turning The combination of a CVD‑coated carbide grade and a controlled chipbreaker delivers consistent results in medium‑steel applications. The CVD coating increases wear resistance while maintaining sufficient fracture toughness for continuous to slightly interrupted cuts, which directly supports higher throughput and fewer index changes. The rhombic geometry with a 55° cutting angle promotes stable engagement in external and internal turning, reducing vibration and improving surface finish. Straightforward integration into ISO tool systems Designed to the ISO indexable insert standard, compatibility with holder systems is determined by form, relief angle, tolerance class, fastening, size and thickness. The ISO conformity simplifies tool selection and inventory management for production environments that rely on standardised tooling. When the correct holder is chosen, the insert provides predictable clamping and repeatable positioning, so setups are faster and process security is improved. Geometry and chip control for reliable surface quality A 0.8 mm nose radius and the single‑sided chipbreaker are tuned for accurate profile control and effective chip formation during turning. The single‑side breaker assists chip flow on typical steel grades, reducing the risk of tangling and promoting consistent contact at the cutting edge. Combined with the 2.38 mm plate thickness, this geometry contributes to mechanical stability and better control of cutting forces, which in turn supports improved surface integrity. Grade characteristics and operational benefits The T9215 grade is formulated as a first choice for general to medium steel machining, offering a balance between wear resistance and edge strength for productive machining cycles. The insert is suitable for continuous to lightly interrupted cuts, helping to maintain tool life under stable production conditions. Choosing this grade supports repeatable results and reliable tool performance across a wide range of common steel alloys. For tailored advice on suitability, holder selection or to secure Tungaloy indexable inserts such as the DCMT 070208 T9215, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application‑specific support and delivery options. Technical data Article number: 6772445 Manufacturer SKU: TUN6772445 Model series: ISO turning indexable inserts Material: Carbide Grade: T9215 Core dimensions Size: 07 Shape: rhombic Thickness: 2.38 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 7° Special features Coating: CVD‑coated carbide Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: Turning (external and internal) Compatibility: ISO‑standard — dependent on form, relief angle, tolerance class, fastening, size and thickness FAQ What applications suit this indexable insert best? The DCMT 070208 T9215 insert from Tungaloy is intended for medium‑steel turning, suitable for both external and internal operations where continuous to slightly interrupted cuts occur. How does the T9215 grade affect tool life and performance? The T9215 grade offers a balance of wear resistance and edge toughness that supports productive machining of medium steels while maintaining reliable tool life under stable cutting conditions. Which geometric features help with surface finish and chip control? The rhombic 07 geometry with a 55° cutting angle, 0.8 mm nose radius and the single‑sided chipbreaker combine to improve chip formation and surface quality during typical turning operations. What must be checked for holder compatibility? Compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness; matching these characteristics ensures correct clamping and repeatable positioning with standard ISO toolholders. Is the insert suitable for interrupted cuts? Yes — the grade and chipbreaker are designed for continuous to slightly interrupted machining; heavily interrupted cuts may require a different grade or geometry. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 070208 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide resilience, a 0.8 mm corner radius and a one-sided chipbreaker, this insert supports dependable productivity in medium-steel turning; order or request application advice via Metav Werkzeuge for fast integration into production. DCMT 070208 T9215 Tungaloy turning insert — CVD-coated carbide, 0.8 mm radius The DCMT070208 T9215 is an ISO-format indexable turning insert designed for reliable external and internal turning in medium-steel applications. DCMT070208 T9215 turning insert by Tungaloy CVD-coated carbide for high wear resistance 0.8 mm corner radius for reliable edge strength One-sided chipbreaker for medium steel turning Higher throughput through robust coating and grade choice The combination of a CVD-coated carbide substrate and the T9215 grade provides a balance of wear resistance and breakage resistance, engineered for continuous to lightly interrupted cuts. This means steady material removal rates and fewer tool changes when machining medium steel, resulting in measurable time savings on repeating production runs. For non-specialists: CVD coating is a thin, hard layer applied to the carbide to reduce flank wear and extend useful tool life while maintaining cutting-edge integrity. Secure clamping and ISO compatibility to reduce setup time As an ISO-format indexable plate, compatibility with the toolholder is determined by the plate shape, relief angle, tolerance class, fixation method, size and thickness. The rhombic 07 shape and the plate’s cylindrical hole with a single-sided countersink (40°–60°) enable secure fastening and repeatable seating, lowering the risk of movement under load. Clearances and tolerance matching simplify holder selection and reduce setup iterations, which supports predictable process stability in batch production. Edge geometry and recommended applications for consistent surface finish The 0.8 mm corner radius paired with a 7° clearance produces a robust cutting edge that tolerates variable feed rates and contributes to consistent surface quality. The one-sided chipbreaker is tailored for medium-steel turning, controlling chip form and evacuation to protect the cutting edge and the workpiece. For best results, match the chipbreaker and grade to the machining stability and workpiece material; in unstable set-ups choose a smaller engagement or increased rigidity in the clamping system to avoid edge overload. Practical guidance for selection and operation Select the matching holder and tightening hardware according to the insert’s geometry and thickness to ensure correct seating and torque distribution. When replacing inserts, verify the tolerance class and seating face to maintain concentricity and reduce vibration. The plate’s design supports productive turning cycles; choosing the T9215 grade typically pays back through longer intervals between changes and fewer rejects when machining medium steel under standard shop conditions. For tailored selection or application advice on this Tungaloy turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into the machining process Technical data Article number: 6777775 SKU: 6777775-Tungaloy Manufacturer SKU: TUN6777775 Model series: ISO-Drehwendeschneidplatten Short description: DCMT070208 T9215 Tungaloy-Wendeplatte Key measurements Corner radius: 0.8 mm Relief/clearance angle: 7° Plate thickness: 2.38 mm Included angle: 55° Plate size: 07 Materials & features Carbide substrate, CVD-coated (grade T9215) Plate form: rhombic Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning Compatibility: ISO indexable turning inserts; holder selection by form, clearance, tolerance, fixation, size, thickness FAQ What machining tasks is this insert best suited for? This insert is intended for external and internal turning of medium steel; the T9215 grade and one-sided chipbreaker deliver a balance of wear resistance and breakage resistance for continuous to slightly interrupted cuts. How does the hole and countersink affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) ensures stable seating and repeatable clamping when used with a compatible ISO holder and appropriate clamping set. Which edge radius should be chosen for general-purpose turning? A 0.8 mm corner radius is specified for a compromise of edge strength and surface finish, suitable for general medium-steel turning where stability is moderate to good. Is the coating suitable for higher productivity shops? Yes; the CVD-coated carbide in the T9215 grade is chosen to extend tool life under higher material removal rates while maintaining reliable performance. What identifiers should be quoted when ordering or enquiring? Please quote the designation DCMT070208 T9215 (SKU: 6777775-Tungaloy) and the manufacturer article number 6777775 for exact matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade T9225, precise rhombic geometry and secure clamping for consistent medium‑to‑heavy steel turning; the result is reliable chip control and longer tool life. Order the DCMT 070208 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 070208 T9225 — ISO turning insert, CVD‑coated carbide, 7° relief (Tungaloy) A DCMT 070208 T9225 indexable turning insert engineered for medium to heavy steel turning, offering a robust universal grade and stable chip formation in changing cutting conditions. CVD‑coated carbide grade T9225 for steel Robust universal grade for medium–heavy turning 7° relief angle for stable cutting Rhombic ISO insert, size 07, 0.8 mm radius Optimised grade for demanding steel turning The insert’s CVD‑coated surface and carbide substrate deliver a balanced combination of wear resistance and toughness. The T9225 grade is formulated as a robust universal solution for medium to heavy steel applications, making it suitable where variable engagement or slight interruptions in the cut demand higher toughness. Because the coating reduces friction and protects the substrate, tool life is extended and cutting stability is improved, which in turn reduces unplanned tool changes and boosts throughput. Geometry and edge design that ensure stable, repeatable cuts The rhombic shape combined with a 7° relief ensures controlled cutting forces and consistent contact geometry at the tool–workpiece interface. The 0.8 mm corner radius helps to distribute cutting load, improving edge robustness and surface finish on external and internal turning operations. The insert’s 2.38 mm thickness and the hole with cylindrical bore plus single‑side countersink provide secure clamping, which reduces vibration and supports repeatable positioning in ISO‑compliant tool holders. System compatibility and practical chip control As part of an ISO system, the insert is matched to appropriate external holders or boring bars, with shims, clamping sets and replacement screws forming the complete assembly. The single‑sided chipbreaker suits a wide range of turning strategies; selecting the right breaker and grade for the material and stability conditions optimises chip formation and evacuation. This pragmatic configuration improves machining consistency, lowers cycle times and makes the process more economical over the long run. Contact Metav Werkzeuge today for tailored tool recommendations and order the DCMT 070208 T9225 Tungaloy insert with SKU TUN6781053 for dependable medium‑to‑heavy steel turning Technical data Article number: 6781053 Manufacturer SKU: TUN6781053 Internal SKU: 6781053-Tungaloy Series: ISO indexable turning inserts Application: Turning Facts Relief angle: 7° Insert included angle: 55° Thickness: 2.38 mm Size: 07 Corner radius: 0.8 mm Special features Material: carbide, CVD‑coated Grade: T9225 (robust universal grade for steel) Shape: rhombic Hole: with hole — cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided FAQ What materials is this insert suitable for? The DCMT 070208 T9225 insert is intended primarily for steel turning; the T9225 CVD‑coated carbide grade provides broad steel compatibility and robust chip control. Which holder types are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, attachment method, size and thickness; this ISO rhombic insert fits ISO‑compliant external holders and boring bars designed for size 07 inserts. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and improves surface finish on heavier cuts, reducing the risk of edge chipping under interrupted or variable cutting conditions. Does the insert include a chipbreaker, and when should it be used? Yes — the insert features a single‑sided chipbreaker; choose the chipbreaker and grade according to the workpiece material, cutting parameters and machine stability to ensure effective chip control. What is the correct SKU to order this item? Order using SKU TUN6781053 or article number 6781053 to ensure the correct DCMT 070208 T9225 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9225 Wendeplatten - Tungaloy
Combining a robust CVD-coated carbide grade with ISO conformity delivers reliable performance and consistent tool life in medium-to-heavy steel turning; the rhombic geometry and 0.8 mm corner radius support stable engagement and improved surface finish. Order the DCMT070208 T9225 directly via Metav Werkzeuge or request application advice from the consultancy team if required. DCMT070208 T9225 ISO turning insert for medium-to-heavy steel turning by Tungaloy The DCMT070208 T9225 is an ISO rhombic turning insert with a CVD-coated carbide grade designed for robust external and internal turning across variable engagement conditions. CVD-coated carbide universal grade T9225 Rhombic ISO insert DCMT070208, 7° relief 0.8 mm corner radius for stable engagement Cylindrical hole with 40°–60° countersink Suitable for medium-to-heavy steel turning Increase process reliability with a tough CVD-coated grade The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T9225 provides a measurable increase in durability during demanding operations. This grade is optimised for medium-to-heavy steel machining where intermittent cuts or varying depths of cut demand greater fracture resistance. The hardened coating reduces flank and crater wear, which lengthens tool life and lowers tooling costs per component while maintaining consistent cycle times. Achieve stable cutting and improved surface quality Geometry and edge preparation translate directly into part quality: the rhombic form with a 0.8 mm corner radius and a one-sided chipbreaker delivers controlled chip formation and reduced vibration during finishing and semi-finishing passes. The 7° relief angle contributes to predictable cutting forces, resulting in improved surface finish and repeatable dimensional accuracy. Secure fastening via the cylindrical hole with a 40°–60° countersink ensures reliable clamping and positional stability in compatible holders. Simple integration into ISO tool systems for efficient operation As part of the ISO turning insert series, the indexable insert integrates into standard holders using form, relief angle, tolerance class, clamping method, size and thickness as compatibility criteria. The nominal plate thickness of 2.38 mm and size 07 simplify inventory planning and changeover procedures. In practical terms, shops benefit from a reduced setup time and predictable tool behaviour: a compact, robust insert supports productive turning sequences while allowing easy replacement of the cutting edge without complex regrinding. For original Tungaloy performance and support, contact Metav Werkzeuge for availability of the DCMT070208 T9225 insert and tailored application recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781457 Manufacturer SKU: TUN6781457 Model: DCMT070208 Name: DCMT070208 T9225 Tungaloy turning insert Facts Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 2.38 mm Plate size: 07 Insert angle: 55° Special features Material: carbide Coating/grade: T9225 (CVD-coated) Shape: rhombic Hole: cylindrical hole + one-sided countersink 40°–60° Chipbreaker: one-sided Application: turning (external and internal) Compatibility: ISO series; holder compatibility depends on form, relief, tolerance, clamping, size, thickness FAQ What materials is this insert designed to machine? The DCMT070208 T9225 insert is intended primarily for medium-to-heavy steel machining and performs well where increased toughness is required. How does the corner radius affect the machining result? A 0.8 mm corner radius increases edge strength and helps achieve a steadier surface finish under variable engagement, reducing the risk of edge chipping. Which clamping features ensure secure seating of the insert? Secure seating is achieved via the cylindrical hole with a 40°–60° countersink, compatible with standard ISO clamping screws and appropriate holder geometries. Is the insert suitable for interrupted cuts or variable depths of cut? Yes; the T9225 grade and rhombic geometry are chosen for robustness under intermittent cutting and changing engagement conditions. Which holder criteria determine compatibility with this insert? Compatibility is governed by form, relief angle, tolerance class, clamping method, size and thickness; matching these specifications ensures correct seating and performance of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade for toughness, an ISO-standard rhombic form for broad holder compatibility, and precise seating features for consistent chip control; order the insert directly via Metav Werkzeuge or consult the technical team for holder matching and application advice. DCMT 070208 T9225 – ISO turning insert (CVD-coated carbide) by Tungaloy The DCMT070208 T9225 is an ISO-standard rhombic turning insert designed for medium to heavy steel turning, offering robust chip control and reliable edge life in varying engagement conditions CVD-coated cemented carbide T9225 Rhombic 07 insert with 7° clearance 0.8 mm corner radius for versatile cutting Cylindrical hole with single-side countersink Consistent performance for medium to heavy steel turning The combination of a CVD-coated surface and a T9225 cemented carbide substrate provides a balance of wear resistance and toughness tailored to more demanding steel applications. This grade is formulated to withstand changing engagement conditions and lightly interrupted cuts, so the insert maintains edge integrity and extends productive tool life. The coating reduces flank and crater wear, which contributes to predictable tool behaviour and fewer unscheduled indexings during batch production. ISO compatibility and secure clamping reduce setup time The insert follows ISO geometry and the rhombic 07 format, ensuring compatibility with a wide range of external and internal turning holders. Key seating and fastening considerations — including form, clearance angle, tolerance class, fastening method, size and thickness — determine correct fit and repeatability. The cylindrical hole with a single-side countersink (40°–60°) and 2.38 mm plate thickness enable secure clamping and reliable seating, reducing vibration and improving surface finish in regular production cycles. Detailed holder matching information is available for precise system assembly. Practical productivity gains and straightforward application guidance With a 0.8 mm corner radius and a one-sided chipbreaker, this insert is suitable for versatile turning tasks, from semi-finishing to more robust passes in steel. The standardised form and stable chip formation characteristics of this grade support consistent part quality and predictable tool-change intervals, which together lower overall machining costs per component. Selection of the appropriate chipbreaker and insert geometry, matched to the workpiece material and machining stability, results in improved process security and repeatable outcomes across shifts. Further technical data and compatibility notes are provided on request to support process planning. For specific holder recommendations, chipbreaker selection or immediate availability of the DCMT070208 T9225 insert, contact Metav Werkzeuge for expert advice and fast processing. Technical data Article number: 6781032 SKU: 6781032-Tungaloy Manufacturer SKU: TUN6781032 Model series: ISO turning inserts Name: DCMT070208 T9225 Tungaloy insert Core specifications Corner radius: 0.8 mm Clearance angle: 7° Lead angle / approach: 55° Thickness: 2.38 mm Size: 07 Materials & features Coating: CVD-coated cemented carbide Substrate: cemented carbide Shape: rhombic (07) Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning of steel Grade purpose: robust universal grade for medium to heavy steel turning FAQ What materials is this insert designed for? The DCMT070208 T9225 insert is optimised for medium to heavy steel turning; the T9225 grade offers toughness for variable engagement and lightly interrupted cuts. How does the hole and countersink benefit clamping? The cylindrical hole with a single-side countersink (40°–60°) secures the insert in standard ISO holders, improving seating stability and reducing the risk of movement under load. Which cutting tasks suit the 0.8 mm corner radius? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, making it suitable for semi-finishing and more robust roughing passes in steel applications. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO geometry (rhombic 07) and its compatibility is defined by form, clearance, tolerance class, fastening, size and thickness to ensure correct holder matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com