DCMT 070208 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade engineered for toughness and the ISO rhombic form for reliable turning in medium to heavy steel; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCMT 070208 T9225 Tungaloy turning insert — CVD-coated carbide, 0.8 mm corner radius The DCMT 070208 T9225 is an ISO-standard rhombic turning insert, designed as a robust universal grade for external and internal turning in steel under varying engagement conditions CVD-coated carbide for wear resistance Universal grade T9225 for medium/heavy steel ISO rhombic form DCMT 070208 0.8 mm corner radius for edge security High-performance cutting for medium to heavy steel The insert delivers consistent cutting life through the CVD-coated carbide T9225 grade, which combines wear resistance with increased toughness for interrupted cuts and fluctuating engagement. The 0.8 mm corner radius provides a compromise between edge strength and surface finish, helping to avoid premature chipping on tougher passes. For process reliability, this turning solution reduces tool change frequency and supports stable chip formation when paired with a suitable holder and clamping kit. Clear compatibility and secure clamping for repeatable results Being ISO-standard in form, the insert aligns with common external holders when the holder matches in shape, clearance and tolerance. The specified 7° clearance angle and 2.38 mm thickness ensure correct seating, while the cylindrical hole with single-sided countersink (40°–60°) provides positive fixation and simplified replacement. Correct holder selection and torque on the replacement screw maintain consistent cutting geometry and repeatability across batches. System advantages and recommended uses for efficient machining As part of a typical turning system—insert, compatible external or boring holder, clamp pad and replacement screws—the component is particularly suitable for turning operations where robustness is needed rather than ultra-fine finishing. The one-sided chipbreaker supports controlled chip flow in many steel machining scenarios; choose a chipformer and grade matching the material and machine stability for optimal economy. For organised workshop processes, the ISO designation and familiar form factor simplify inventory and reordering of identical inserts. For application advice, availability or to order the DCMT 070208 T9225 from Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery information Technical Data Article number: 6781226 SKU: 6781226-Tungaloy Manufacturer SKU: TUN6781226 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 7° Main angle: 55° Thickness: 2.38 mm Size: 07 Special features Shape: rhombic (DCMT form) Coating: CVD-coated carbide Grade: T9225 (robust universal) Chipbreaker: one-sided Hole style: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning indexable inserts Material: carbide FAQ What materials is this insert suitable for? The DCMT 070208 T9225 insert is intended primarily for steel machining in medium to heavy duties; the T9225 grade is chosen for its toughness under variable cutting conditions. How does the CVD coating benefit machining performance? A CVD-coated carbide insert provides improved wear resistance and thermal stability; on the DCMT 070208 T9225 this extends life and supports consistent surface quality under sustained cutting loads. Which holders are compatible with the ISO rhombic form? Holders that match the DCMT form, the 7° clearance, and the plate thickness will be compatible; exact compatibility depends on holder geometry and tolerance class. What is the significance of the cylindrical hole with countersink? The cylindrical hole with a one-sided countersink (40°–60°) secures the insert reliably in the clamp system, improving repeatability and simplifying replacement on production lines. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, ISO rhombic 07 geometry and a 0.8 mm corner radius for reliable medium-to-heavy steel turning; secure the inserts through Metav Werkzeuge or consult our technical team for application-specific advice. DCMT070208 T9225 Tungaloy turning insert — CVD-coated carbide, rhombic 07 for turning The DCMT070208 T9225 is an ISO-format rhombic turning insert designed for external and internal turning of steels where interrupted cuts or varying engagement demand increased toughness. CVD-coated carbide for long tool life Universal T9225 grade for medium–heavy steel Rhombic 07 geometry with 7° relief angle With central hole and 40°–60° countersink Consistent metal removal and predictable chip control for turning operations The insert delivers stable chip formation and predictable tool life thanks to its CVD-coated carbide construction and the universal T9225 grade. In practice, this means more productive machining windows during longer tool cycles and fewer unplanned indexings, which supports steady workflow on production lathes. The one-sided chipbreaker is optimised for common turning feeds and helps evacuate chips reliably, reducing heat concentration at the cutting edge and improving surface consistency in serial work. Robust grade selection for mixed and interrupted cutting conditions Designed as a robust universal grade, the T9225 composition balances wear resistance and toughness to tolerate slightly interrupted cuts or variable engagement without premature edge failure. The result is fewer tool changes and a lower risk of process interruptions during the machining of alloyed and carbon steels. For engineers seeking economical throughput, the combination of the grade and the coated substrate provides a favourable cost-per-component ratio under medium-to-heavy cutting regimes. Geometry and sizing that simplify holder selection and setup The insert conforms to ISO designation and the rhombic 07 form, with a 7° relief angle, 55° included angle, 2.38 mm thickness and 0.8 mm corner radius; compatibility with the holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The central cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and repeatable seating, aiding stable cutting in both external and internal turning fixtures. When matching to an external holder or boring bar, verify these geometric parameters to ensure correct clamping and intended rake/lead relationships. Practical benefits for workshop efficiency and process reliability Using an ISO-format insert from a proven carbide grade reduces set-up variability and supports predictable scheduling. The coated surface reduces flank wear and contributes to consistent part finish over longer runs, while the specified 0.8 mm radius offers a compromise between edge strength and surface definition for turned profiles. For operations where material mix or intermittent cuts are common, this insert provides a pragmatic option that keeps machines running and pieces within tolerance more often. For tailored application advice or to obtain original Tungaloy quality for turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holder pairings and cutting data Technical data Article number: 6781091 Manufacturer SKU: TUN6781091 SKU: 6781091-Tungaloy Model series: ISO turning inserts Material: carbide Application: Turning Core dimensions Size designation: 07 Thickness: 2.38 mm Relief angle: 7° Included angle: 55° Corner radius: 0.8 mm Special features Coating: CVD Grade: T9225 Chipbreaker: one-sided Shape: rhombic 07 Hole: cylindrical hole + single-sided countersink (40°–60°) ISO-format insert, compatible with matching holder geometry, tolerance class and fastening FAQ What materials is this insert suited for? The insert is formulated for medium-to-heavy steel machining; the T9225 grade provides toughness for alloyed and carbon steels and handles slightly interrupted cuts. How does the chipbreaker affect performance? The one-sided chipbreaker promotes controlled chip formation under common turning feeds, improving evacuation and reducing heat at the cutting edge for more consistent surface finish. Which geometric parameters must be matched to the holder? Holders must match the ISO-format plate form, 7° relief angle, size 07, thickness 2.38 mm and the clamping method to ensure secure seating and reliable cutting performance. Is this insert suitable for internal turning? Yes, the rhombic 07 shape and secure central hole seating make the insert suitable for both external and internal turning when paired with an appropriate boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 070208 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated carbide grade and ISO compatibility to ensure stable chip formation and reliable tool life in medium‑to‑heavy steel turning. The combination of a 55° rhombic geometry, a 0.8 mm corner radius and a cylindrical mounting hole with one‑side countersink supports straightforward clamping and consistent performance. Order the insert directly via Metav Werkzeuge or contact their consultants for application advice. DCMT070208 T9225 – ISO turning insert for medium‑to‑heavy steel, CVD‑coated (Tungaloy) A DCMT070208 T9225 indexable insert designed for ISO‑standard turning applications, optimised for robust steel machining where varying engagement and slight interruptions require additional toughness CVD‑coated carbide grade T9225 Universal grade for medium–heavy steel Rhombic ISO plate DCMT 07, 55° cutting angle Cylindrical hole with single‑side countersink Optimised cutting performance for demanding steel turning The combination of a CVD‑coated surface and a tough carbide substrate in grade T9225 provides a balance of wear resistance and fracture toughness that is particularly suitable for medium‑to‑heavy turning. The coating reduces flank and crater wear under elevated temperatures, while the substrate maintains edge stability during slight interruptions or variable engagement conditions. This results in more predictable tool life, fewer unscheduled indexings and improved process economics in batch or continuous production. The single‑sided chipbreaker promotes controlled chip formation, reducing the risk of chip entanglement and improving operator safety. Straightforward compatibility and secure mounting for consistent set‑ups ISO designation and the rhombic geometry make insert selection and holder matching straightforward: the plate form is a rhombic DCMT size 07 with a 55° cutting edge, which determines the tool path and approach angle. The insert features a cylindrical hole with one‑side countersink (40°–60°) for robust mechanical clamping; a backing pad, clamping set and correct screws complete the system. A relief angle of 7° and a plated thickness of 2.38 mm contribute to stable seating in the pocket and reduced vibration, while the 0.8 mm corner radius helps to balance edge strength with acceptable surface finish. These measurable parameters simplify tooling decisions and reduce set‑up time at the lathe. Increased process reliability and application flexibility When fitted into a correctly rated holder or boring bar, this insert supports both external and internal turning operations and adapts to a variety of steel grades and cutting conditions. The universal nature of grade T9225 means one stock keeping unit can cover multiple operations, lowering inventory complexity and speeding up job changeovers. Stable chip formation and consistent cutting forces lead to predictable surface quality and repeatable tolerances, which is particularly valuable in series production. For interrupted cuts or marginal rigidity, the insert’s fracture‑tough composition reduces the likelihood of edge chipping and unplanned downtime, supporting a more efficient machining cycle overall. For robust medium‑to‑heavy steel turning with Tungaloy quality, contact Metav Werkzeuge for precise technical guidance and rapid supply of the DCMT070208 T9225 insert Technical Data Article number: 6781485 SKU: 6781485-Tungaloy Manufacturer SKU: TUN6781485 Model series: ISO-Drehwendeschneidplatten Designation: DCMT070208 Manufacturer: Tungaloy Core data Corner radius: 0.8 mm Plate thickness: 2.38 mm Cutting angle: 55° Relief angle: 7° Size: 07 Hole style: with hole (cylindrical + single‑side countersink 40°–60°) Special features CVD‑coated carbide (T9225) Universal grade for medium‑to‑heavy steel turning Rhombic plate form (DCMT) Single‑sided chipbreaker ISO‑standard indexable insert Compatible with appropriate external holders and boring bars FAQ What materials is this insert intended for? The DCMT070208 T9225 insert is formulated as a universal solution for medium‑to‑heavy steel turning, offering toughness for variable engagement and slightly interrupted cuts. Can this insert be used for both external and internal turning? Yes, the rhombic DCMT geometry and ISO compliance allow the insert to be used in both external and internal turning applications when paired with the correct holder. What does the T9225 designation indicate? T9225 denotes a CVD‑coated carbide grade with enhanced toughness and wear resistance, suited to robust turning operations where changing machining conditions require a resilient cutting edge. How should the insert be mounted in the holder? Mount the insert into a compatible ISO pocket using the cylindrical hole with the one‑side countersink (40°–60°) and the appropriate clamp set and screw to ensure secure seating and correct orientation. What are the key dimensions that affect machining results? The critical dimensions are the 0.8 mm corner radius, 2.38 mm plate thickness, 55° cutting angle and 7° relief angle — all of which influence chip formation, edge strength and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 AH120 Wendeplatten - Tungaloy
Take advantage of the PVD-coated cemented carbide grade and the 55° rhombic geometry for consistent, stable turning results; the 0.2 mm corner radius and single-sided chipbreaker further support reliable edge control and process security. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT 11T302 AH120 indexable insert for turning — Tungaloy A DCMT 11T302 AH120 indexable insert designed for general external and internal turning, offering a sharp cutting edge and high process reliability for a wide range of turning operations PVD-coated cemented carbide grade AH120 Rhombic 55° geometry for versatile turning 0.2 mm corner radius for controlled edge reach Cylindrical hole with one-sided countersink Stable cutting performance that keeps production on schedule The rhombic 55° geometry combined with the AH120 grade delivers a balance of sharpness and wear resistance, translating into shorter cycle times and fewer interruptions for tool changes. The PVD coating reduces friction and improves heat resistance during continuous cutting, which helps maintain dimensional stability on turned components. For operations prioritising throughput and repeatability, this configuration ensures predictable performance, especially in medium-duty turning tasks where consistent chip formation is essential. Geometry and edge design for improved surface quality A 0.2 mm corner radius and the single-sided chipbreaker are engineered to control chip flow and reduce edge chipping, resulting in a more reliable surface finish with fewer secondary operations. The insert’s rhombic form provides versatile approach angles that suit both external profiles and light internal turning. These design choices minimise vibration and support stable cutting forces, which in turn can reduce rework and improve downstream efficiency in production workflows. Material and clamping details that increase tool life Manufactured from cemented carbide and finished with a PVD layer, the insert resists abrasive wear and edge breakdown in typical turning applications. The insert is supplied with a cylindrical hole plus one-sided countersink (40°–60°) for secure clamping and straightforward seating in matched holders; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. Choosing the right holder and matching the insert’s 3.97 mm thickness ensures optimal stability and reduces the risk of premature failure, supporting longer uninterrupted production runs. Contact Metav Werkzeuge for tailored cutting data, sample recommendations and to order DCMT 11T302 AH120 inserts directly — eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical data Article number: 6852452 Manufacturer SKU: TUN6852452 Seller SKU: 6852452-Tungaloy Facts Grade: AH120 Material: cemented carbide Coating: PVD Geometry: rhombic, 55° Relief angle: 7° Corner radius: 0.2 mm Thickness: 3.97 mm Size: 11 Special features Application: turning Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided ISO designation: 11T302 FAQ What holder types are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, clamping method, size and thickness; the DCMT 11T302 AH120 insert is intended for standard ISO indexable turning holders matching the rhombic 55° form. Which materials can this insert machine effectively? The AH120 grade and PVD-coated cemented carbide construction make the insert suitable for general turning tasks across a broad range of materials where a sharp edge and process security are required, including common steels and alloyed materials. How does the chipbreaker influence performance? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation, contributing to consistent surface finish and reduced risk of edge damage during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, stable cutting edge and a PVD-coated AH6225 grade designed for reliable machining of rostfreier Stahl; the compact 11 mm rhombic geometry with a 0.2 mm corner radius delivers repeatable finishes and secure clamping. Order the DCMT11T302 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility. DCMT 11T302 AH6225 ISO turning insert for external and internal turning — Tungaloy DCMT11T302 AH6225 is an ISO-format indexable insert engineered for turning applications, offering a sharp yet stable cutting edge tailored to medium-duty machining of rostfreier Stahl. PVD-coated cemented carbide AH6225 One-sided chipbreaker for controlled chips Rhombic 11 mm form with 7° clearance 0.2 mm corner radius for fine finishing Consistent edge performance for rostfreier Stahl The PVD coating on the AH6225 grade combines wear resistance with a fine surface finish, making the insert especially suitable for machining rostfreier Stahl under varying conditions. The substrate of the insert is cemented carbide, engineered to hold a sharp and stable cutting edge during medium cutting depths; this reduces the frequency of indexings and supports predictable cycle times. The outcome is improved process reliability and fewer unscheduled tool changes. Geometry designed for reliable chip control and clamping The rhombic form and integrated one-sided chipbreaker direct chips away from the cut, improving machining stability and surface integrity. At 11 mm size with 7° clearance, the insert sits securely in standard ISO holders; the cylindrical hole with a single-side countersink (40°–60°) ensures reliable clamping and repeatable seating. The 0.2 mm corner radius helps achieve a controlled edge honed for light finishing passes without compromising strength. ISO compatibility simplifies tool selection and system integration Being ISO-compliant, the insert fits into common insert systems when matched for form, clearance angle, tolerance class, fastening method, size and thickness. Specifying these parameters during tool selection reduces set-up time and minimises the risk of mismatches between insert and holder. The standardised format supports quick replacement in production environments and eases inventory management across machining centres. Improved productivity with predictable tool life Manufactured by Tungaloy, this insert grade delivers a balance of edge toughness and wear resistance for productive turning of external and internal features. The combination of coating technology and substrate choice offers consistent tool life across interrupted cuts and mixed batches, supporting steady production output. Selecting the correct chipbreaker and grade for the workpiece stabilises cutting forces and contributes to overall machining economy. Contact Metav Werkzeuge to discuss holder compatibility and secure the DCMT11T302 AH6225 insert for your turning operations—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6829464 SKU: 6829464-Tungaloy Manufacturer SKU: TUN6829464 Model series: ISO turning indexable inserts Facts Size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 55° Corner radius: 0.2 mm Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Grade: AH6225 (PVD-coated cemented carbide) Form: rhombic insert Chipbreaker: one-sided Application: external and internal turning Compatibility: ISO insert system FAQ What material is this insert optimised for? The DCMT11T302 AH6225 insert is optimised for machining rostfreier Stahl and provides a balanced combination of wear resistance and edge stability for medium-duty operations. Can the insert be used for both external and internal turning? Yes, the indexable insert is designed for both external and internal turning when paired with an appropriate ISO holder and correct mounting parameters. Which chipbreaker should be selected for general-purpose turning? The included one-sided chipbreaker is suitable for a range of operations; for specific workpiece alloys or interrupted cuts, a chipbreaker matched to the material and depth of cut is recommended. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius helps achieve finer surface finishes on finishing passes while maintaining sufficient edge strength for moderate machining. What should be checked for holder compatibility? Confirm form, clearance angle, tolerance class, fastening, size and thickness of the insert against the holder specification to ensure correct fit and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH6225 carbide, precise ISO compatibility and a stable, sharp cutting edge for consistent turning performance. Order the DCMT11T302 AH6225 insert directly via Metav Werkzeuge or ask the consultants if needed. DCMT11T302 AH6225 Carbide Turning Insert for Turning — Tungaloy DCMT11T302 AH6225 is a rhombic, ISO-standard turning insert designed for medium cutting duties on stainless steels and general turning applications PVD-coated AH6225 carbide for stainless steels Sharp yet stable cutting edge ISO rhombic insert DCMT11T302 Cylindrical hole with 40°–60° countersink 0.2 mm nose radius, 7° relief angle High-performance coating and substrate for reliable metal removal The PVD-coated AH6225 grade combines a wear-resistant coating with a tough carbide substrate to deliver a balance of edge sharpness and stability. This results in predictable tool life under varying cutting conditions when machining stainless steel, where built-up edge and heat generation can otherwise compromise component finish. The coating reduces friction and improves cutting-edge protection, which in turn supports higher productivity and fewer interruptions for tool changes. Precise geometry and ISO conformity for secure holder compatibility The insert follows the ISO profile for rhombic inserts and is specified as DCMT11T302, ensuring dimensional and tolerance conformity with matching holders. The rhombic form with an included angle of 55°, a 0.2 mm nose radius and a 7° relief angle helps maintain cutting stability while permitting versatile approach angles. The centre cylindrical hole with a single-sided 40°–60° countersink supports reliable clamping and repeatable seating in standard external holders and boring bars. Practical machining advantages from chip control and edge design Equipped with a one-sided chipbreaker suited to turning operations, the insert assists controlled chip formation and evacuation, reducing the risk of entanglement and improving surface finish. The moderately sharp but robust edge geometry is tailored for medium-duty cuts and variable conditions; this lowers the likelihood of premature edge failure and keeps cycle times consistent. For production environments, this combination supports process stability and reduces scrap rates through consistent dimensional repeatability. Guidance for selection, mounting and process optimisation When choosing an insert, match the chipbreaker and AH6225 grade to the workpiece alloy and cutting parameters: the grade is optimised for stainless steels and similar materials that require a balanced edge. Mounting requires correct seating on a suitable ISO-compatible holder and tightening to the manufacturer’s torque recommendations to ensure repeatable positioning. Regular checks of edge wear and adherence to recommended speeds and feeds will extend service life, while the insert’s design simplifies replacement during shift changes and minimises downtime. For application advice, availability checks or tailored recommendations for the Tungaloy DCMT11T302 AH6225 turning insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialists are available to advise on holder compatibility and optimal cutting data. Technical data Article number: 6951221 Manufacturer SKU: TUN6951221 Model series: ISO turning indexable inserts Material: carbide Core data ISO designation: DCMT11T302 Insert size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Special features PVD-coated AH6225 grade Rhombic insert shape One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Application: Turning, suited for stainless steel FAQ What materials is this insert suited for? The DCMT11T302 AH6225 insert is optimised for stainless steel and comparable alloys; the AH6225 grade offers toughness and wear resistance for variable cutting conditions. How does the insert secure to a holder? The insert uses a central cylindrical hole with a single-sided countersink (40°–60°) for positive clamping in ISO-compatible external holders and boring bars. What chip control can be expected from this grade and geometry? The one-sided chipbreaker on this Tungaloy insert promotes controlled chip formation during turning, improving evacuation and surface finish for medium-duty cuts. Which dimensions define this insert for ordering and compatibility? Key dimensions include the ISO designation DCMT11T302, size 11, 3.97 mm thickness, 0.2 mm corner radius and 7° relief angle, which together determine holder fit and cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade designed for reliable performance on rostfreier Stahl, the compact rhombic 11 mm format and the secure clamping geometry for uninterrupted turning operations. Order the insert directly via Metav Werkzeuge or consult the team for selection advice. DCMT 11T302 AH6225 Tungaloy — Indexable turning insert for turning DCMT11T302 AH6225 is an ISO-standard indexable insert engineered for general-purpose turning, especially where a sharp yet robust cutting edge is required. PVD-coated carbide for rostfreier Stahl Sharp and stable cutting edge Rhombic 11 mm insert with 7° relief Cylindrical hole with 40°–60° countersink Consistent performance for stainless-steel turning The combination of a PVD-coated surface and the AH6225 cemented carbide grade delivers a balance between wear resistance and edge sharpness, optimised for machining rostfreier Stahl. This configuration reduces flank wear and maintains a sharp cutting edge under variable cutting conditions, which translates into longer periods between indexings and improved throughput. For shops aiming to standardise inserts across medium-duty turning operations, the engineered coating enhances thermal stability and provides reliable tool life without sacrificing surface finish. Geometry and fit that ensure repeatable results Designed as a rhombic insert with an effective size of 11 mm, the geometry and relief characteristics determine compatibility with holders and contribute directly to machining stability. The insert features a 3.97 mm thickness, a 0.2 mm radius and a 7° relief, values that influence cutting forces, chip flow and edge strength. The cylindrical hole with a 40°–60° countersink enables secure clamping and repeatable seating in compatible carriers. When the holder, clamp set and screw system match these dimensions and tolerances, runout and vibration are minimised, improving dimensional accuracy and surface quality. Chip control and system integration for higher productivity A one-sided chipbreaker layout supports predictable chip formation during both external and internal turning; selecting the chipbreaker and grade according to the workpiece material and machining stability will reduce recutting and cycle times. As an ISO-standard insert, it forms part of a system comprising a suitable external holder or boring bar, a support shim/clamp set and spare screws for rapid replacement. The modular approach simplifies inventory and maintenance, letting workshops react quickly to changing jobs while keeping setup times low and repeatability high. Technical advice is available to help match the insert to the machining strategy and holder geometry. For tailored advice on Tungaloy turning inserts or to place an order, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the team will assist with selection and availability Technical data Article number: 6951228 SKU: 6951228-Tungaloy Manufacturer SKU: TUN6951228 Brand: Tungaloy Product designation: DCMT11T302 AH6225 Tungaloy indexable insert Facts Insert size: 11 mm Thickness: 3.97 mm Relief angle: 7° Included angle: 55° Corner radius: 0.2 mm Special features Material: cemented carbide Coating / grade: AH6225 (PVD-coated) Shape: rhombic Chipbreaker: one-sided Hole style: cylindrical hole with 40°–60° countersink Application: turning (external and internal) System: ISO-standard indexable insert, requires matching holder, shim/clamp set and screws FAQ What materials is this insert best suited for? The DCMT11T302 AH6225 Tungaloy insert is developed primarily for machining rostfreier Stahl, offering a balance of edge sharpness and wear resistance for medium-duty turning. How does the AH6225 grade affect tool life? The AH6225 PVD-coated cemented carbide provides improved thermal stability and wear resistance, which helps maintain cutting-edge integrity and extends effective tool life under varying cutting conditions. Which holder features are required for correct fitting? Compatibility is determined by insert form, relief angle, tolerance class, fixation method, size and thickness; the rhombic form, 7° relief, 3.97 mm thickness and the cylindrical hole with countersink require a matching carrier and clamp set for secure seating. Can this insert be used for internal turning or boring? Yes — with a suitable boring bar or internal holder designed to accept ISO-standard rhombic inserts and to provide stable support, this insert is suitable for both external and internal turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 AH6235 Wendeplatten - Tungaloy
Combine the PVD-coated AH6235 grade with the rhombic form and a 0.2 mm corner radius for reliable performance in turning of stainless steel and interrupted cuts; the 7° relief and ISO compatibility support stable clamping and predictable tool life. Order the DCMT11T302 AH6235 Tungaloy turning insert directly via Metav Werkzeuge or consult our technical advisors for application-specific parameters. DCMT 11T302 AH6235 turning insert — PVD-coated, 0.2 mm radius, Tungaloy DCMT 11T302 AH6235 is a rhombic ISO turning insert engineered for external and internal turning, optimised for stainless steel and interrupted cutting conditions PVD-coated AH6235 grade for tough alloys 0.2 mm corner radius for accurate profiling Rhombic ISO plate, 7° relief, 55° included angle Cylindrical hole with one-sided countersink 40°–60° Consistent cutting performance for higher productivity The PVD-coated AH6235 grade is a carbide formulation developed to deliver toughness and improved resistance to chipping when machining stainless steel and similar demanding materials. The combination of a tougher substrate and a physical vapour deposition layer reduces edge wear and extends the interval between indexings, which translates into fewer tool changes and higher effective uptime. The small 0.2 mm corner radius provides precise profile control and helps maintain dimensional accuracy on finishing passes, while the robust coating improves performance under interrupted cuts where edge stability is critical. The result is measurable productivity gains and a reduced risk of premature tool failure. Seamless integration with ISO toolholding for secure clamping Designed as an ISO-compliant plate, the rhombic form and defined geometry ensure compatibility with standard holders when matching form, relief angle, tolerance class, fastening method, size and thickness. The plate thickness of 3.97 mm and the cylindrical hole with a one-sided countersink (40°–60°) provide secure engagement and repeatable seating in the clamp system, reducing vibration and improving surface finish. The specified 7° relief and 55° included angle yield a stable cutting edge orientation, which benefits both external and internal turning operations. Clear, measurable geometry makes setup faster and changeovers predictable, supporting continuous production flow. Durability, chip control and application guidance A dedicated one-sided chipbreaker and the AH6235 chemistry promote stable chip formation and help prevent troublesome build-up on the cutting edge in interrupted or unstable cuts. This makes the insert suitable where fragmentary chips and breakout risk are elevated. The PVD layer also supports higher cutting speeds in many cases, while the tougher substrate reduces brittle fracture. For process planning, standard ISO parameters can be used as a baseline; Metav Werkzeuge can supply recommended cutting speeds and feeds for specific machines and materials. The engineering behind the insert focuses on consistent results and reduced rework, giving confidence in repeatable part quality and tool life. For application-specific advice on the DCMT11T302 AH6235 Tungaloy insert, and to secure original parts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for technical data, availability and tailored recommendations Technical data Article number: 6890177 SKU: 6890177-Tungaloy Manufacturer SKU: TUN6890177 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Countersink angle range: 40°–60° Special features PVD-coated AH6235 grade Carbide material Rhombic plate form One-sided chipbreaker With cylindrical hole and one-sided countersink ISO-standard turning insert Application: Turning Suitable for stainless steel and interrupted cuts FAQ Is this insert suitable for machining stainless steel? Yes. The DCMT11T302 AH6235 insert is formulated with the AH6235 grade to handle stainless steel and applications with interrupted cuts or increased breakout risk. What are the key clamping requirements for this ISO plate? Secure seating requires matching the rhombic form, 7° relief, plate thickness (3.97 mm) and the cylindrical hole with one-sided countersink; correct holder choice ensures repeatable clamping for the DCMT11T302 AH6235. Which chip control can be expected with this insert? The one-sided chipbreaker on the DCMT11T302 promotes stable chip formation, reducing the likelihood of long, stringy chips in interrupted or unstable cutting conditions. Can standard turning parameters be used as a starting point? Standard ISO-based parameters are a suitable baseline; however, Metav Werkzeuge can provide optimised speeds and feeds for the DCMT11T302 AH6235 depending on machine rigidity and material specifics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 AH725 Wendeplatten - Tungaloy
Take advantage of the PVD‑coated AH725 grade and the versatile 55° rhombic geometry to increase process security and reduce tool changes; order the insert directly via Metav Werkzeuge or request individual machining advice from our consultants. DCMT11T302 AH725 ISO turning insert — Tungaloy, versatile 55° rhombic geometry DCMT11T302 AH725 is an ISO‑standard indexable insert designed for external and internal turning, delivering reliable chip control and consistent edge life. ISO rhombic insert 55° geometry PVD‑coated AH725 carbide grade Universal, break‑resistant for Stahl and rostfreier Stahl Central hole with cylindrical seat, 40°–60° countersink Maximise uptime with a robust, universal grade The insert is produced in a PVD‑coated carbide grade (AH725) that combines wear resistance with controlled fracture behaviour, making it particularly suitable where material grades vary. By choosing this grade, machining operations benefit from fewer unexpected insert failures and more predictable tool life, which contributes directly to a stable production flow and lower process interruptions. The single‑sided chipbreaker provides consistent chip formation for common turning tasks. Achieve reliable machining across steel grades The geometrical design and material pairing emphasise process security: the rhombic shape with a 55° approach angle and the modest 0.2‑mm corner radius support a balance between cutting edge strength and surface finish. This configuration is advantageous for small‑tool applications and for jobs where frequent workpiece material changes occur. Operators will observe repeatable cutting behaviour when machining both Stahl and rostfreier Stahl, improving batch consistency and reducing scrap rates. Easy integration with ISO tool systems Compliance with ISO dimensions simplifies replacement and tool inventory management. Compatibility depends on form, relief angle (7°), tolerance class, clamp method and plate thickness; the insert measures size 11 with a plate thickness of 3.97 mm, and it is supplied with a central hole featuring a cylindrical seat and a single‑side countersink (40°–60°). These details make it straightforward to match the insert to the correct external holder or boring bar, plus the customary shims, clamping set and replacement screws that form a complete turning system. Practical application guidance for everyday turning Intended primarily for external and internal turning operations, this indexable insert performs well in finishing and medium roughing passes when combined with suitable cutting parameters and stable clamping. The universal nature of the AH725 grade reduces the need for multiple specialised inserts, which simplifies tool selection for mixed‑material workshops. Select a matching chipbreaker and holder stiffness to exploit the insert’s strengths: consistent chip control and reproducible surface quality. Contact Metav Werkzeuge for tailored recommendations on selecting the right holder and cutting data for the Tungaloy DCMT11T302 AH725 insert or to request available stock and delivery options Technical Data Article number: 6856779-Tungaloy Manufacturer SKU: TUN6856779 Manufacturer article number: 6856779 Label: DCMT11T302 AH725 Tungaloy‑insert Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Approach angle: 55° SKU: 6856779-Tungaloy Special features Material: carbide Coating: PVD‑coated (AH725) Plate form: rhombic Chipbreaker: single‑sided Hole: with central hole Hole style: cylindrical hole with single‑side countersink (40°–60°) Model series: ISO‑turning indexable inserts Application: turning Suitable for: Stahl, rostfreier Stahl FAQ What applications is this insert best suited for? The insert is intended for external and internal turning; the AH725 grade supports finishing and medium roughing where material changes are frequent. Which materials can be machined with this grade? The AH725‑grade, PVD‑coated carbide insert is designed for reliable performance on Stahl and rostfreier Stahl. How is the insert secured to the holder? The insert has a central hole with a cylindrical seat and a single‑side countersink (40°–60°); compatibility depends on holder form, clamp method, tolerance class and size. What are the key geometry values to consider when programming a job? Important values are the 55° approach angle, 0.2‑mm corner radius and 3.97‑mm plate thickness, which influence cutting forces and surface finish. Which product identifiers should be used when ordering or enquiring? Refer to the label DCMT11T302 AH725, article number 6856779‑Tungaloy or manufacturer SKU TUN6856779 in correspondence. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade that delivers process reliability and a compact 0.2 mm corner radius for fine turning; the result is stable cutting and consistent surface quality in mixed-steel production. Order the insert directly via Metav Werkzeuge or consult our specialists for fitment advice. DCMT 11T302 AH725 Tungaloy indexable insert for turning The DCMT11T302 AH725 is an ISO rhombic indexable insert designed for external and internal turning, offering a universal, fracture-resistant grade for steel and stainless steels. PVD-coated carbide grade AH725 Rhombic ISO insert, size 11 0.2 mm corner radius for fine turning Cylindrical hole with 40°–60° countersink Stable cutting across mixed steels for reliable throughput The PVD-coated AH725 grade is formulated as a universal, fracture‑resistant carbide solution, making it suitable for both standard steel and stainless steels where machining conditions vary. The combination of the coating and substrate provides improved edge strength and consistent wear behaviour, which directly supports higher process reliability and reduces unexpected interruptions during batch runs. In practice, this means fewer unplanned insert changes and steadier cycle times on medium‑duty turning tasks. Geometry that improves surface finish and dimensional control The rhombic ISO geometry and size 11 format, together with a 0.2 mm corner radius and 7° clearance, create a cutting profile that balances strength with the ability to produce fine finishes. The 3.97 mm thickness contributes to rigidity and heat resistance in the cutting zone, helping to preserve the cutting edge under moderate interruptions or variable feeds. For operations requiring consistent part tolerance and reduced secondary finishing, these geometric choices translate into measurable benefits in first‑pass quality. Secure seating and predictable chip behaviour minimise downtime A cylindrical hole with a 40°–60° countersink and a single‑sided chipbreaker provide reliable mechanical clamping and acceptable chip control for many turning tasks. Correct holder compatibility—determined by insert form, clearance, tolerance class, fastening method, size and thickness—ensures a secure fit and repeatable positioning. This predictable assembly reduces the risk of seating errors, shortens changeover time and supports safer, more efficient tool handling on the shop floor. Practical system advantages for everyday production As part of a complete turning system—insert, suitable outer holder or boring bar, shim/clamp set and spare screws—the insert supports straightforward inventory management and fast replacement. The universal nature of the grade makes the component versatile for smaller tools and jobs with high demands on process stability, delivering a durable cutting edge and tangible savings through reduced reworks. Where process reliability and consistent throughput are priorities, the insert promotes production stability in both external and internal turning applications. For guaranteed availability and technical advice on Tungaloy AH725 turning inserts, contact Metav Werkzeuge for tailored recommendations and compatibility checks at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864863 Manufacturer SKU: TUN6864863 SKU: 6864863-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.2 mm Thickness: 3.97 mm Insert size: 11 Clearance angle: 7° Angle: 55° Special features PVD-coated carbide (AH725) Rhombic insert form With cylindrical hole and single-sided countersink (40°–60°) Single-sided chipbreaker Suitable for external and internal turning System: insert, holder/boring bar, shim/clamp set, spare screws FAQ Is this insert suitable for stainless steels? The AH725 grade is a universal, fracture‑resistant carbide developed for machining both steel and stainless steels, so the insert performs well when switching between these materials. What holders are compatible with this insert? Compatibility depends on insert form, clearance, tolerance class, fastening method, size and thickness; the DCMT11T302 fits holders designed for rhombic ISO 11T302 inserts with matching clamping geometry. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius reduces cutting forces and helps achieve finer surface finishes, making the insert suited to finishing passes and jobs requiring tight dimensional control. What chip control can be expected with this insert? The single‑sided chipbreaker offers controlled chip formation in many turning operations; pairing the insert with an appropriate feed and holder enhances chip evacuation. Can the insert be used for both external and internal turning? Yes, the insert is specified for both external and internal turning when mounted in suitable holders or boring bars that align with its ISO geometry and clamping requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD coating, stable chip control and ISO compatibility for dependable turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. DCMT 11T302 AH8005 turning insert by Tungaloy — PVD-coated carbide, 55° rhombic geometry The DCMT11T302 AH8005 Tungaloy indexable insert is a compact ISO turning insert designed for external and internal turning of heat-resistant and hard materials, offering high wear resistance and consistent chip control. PVD-coated carbide AH8005 55° rhombic geometry for versatility 0.2 mm nose radius for fine finishes Single-sided chipbreaker for stable chips High-performance wear resistance for heat-resistant alloys The insert uses a PVD-coated carbide grade (AH8005) engineered for machining heat-resistant alloys and hard materials under stable conditions. The coating improves wear resistance and thermal stability, which translates into longer cutting edge life and fewer index changes. For production environments prioritising predictable tool life and reduced tool consumption, the durable coating and substrate combination deliver consistent cutting forces and surface quality while enabling higher process reliability. Secure clamping and ISO compatibility reduce setup time Built to ISO standards with the designation 11T302, the insert’s 55° rhombic form and a 3.97 mm plate thickness ensure broad compatibility with standard external holders and boring bars. The cylindrical hole with one-sided countersink (40°–60°) provides a reliable seating and repeatable clamping, while the 7° relief angle helps to avoid rubbing on the flank. These precise geometry and tolerance features simplify toolholder selection and speed up insert changes, reducing machine downtime and improving fixture repeatability. Stable chip control and surface finish with minimal rework The one-sided chipbreaker promotes consistent chip formation during turning, which reduces the risk of tangling and improves evacuation in through-hole and shoulder operations. A 0.2 mm nose radius supports fine surface finishes without compromising edge stability on interrupted or light finishing cuts. The combination of controlled chip form and robust cutting edge geometry helps to cut cycle times and lowers the rate of scrap, making the insert an economical choice for medium- to high-stability machining applications. Contact Metav Werkzeuge for tailored cutting data, availability and application support on Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6775794-Tungaloy Manufacturer SKU: TUN6775794 Manufacturer article number: 6775794 Facts ISO designation: 11T302 Insert size: 11 mm Plate thickness: 3.97 mm Nose radius: 0.2 mm Relief angle: 7° Included angle: 55° Hole: with cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating / grade: AH8005 (PVD-coated) Plate form: rhombic Chipbreaker: single-sided Typical use: turning (external and internal) Model series: ISO indexable turning inserts FAQ What materials is this insert best suited for? The DCMT11T302 AH8005 Tungaloy indexable insert is optimised for heat-resistant alloys and other hard materials; the AH8005 PVD-coated carbide grade provides enhanced wear resistance during stable turning operations. How does the insert ensure secure clamping in standard holders? The ISO 11T302 geometry, cylindrical hole with one-sided countersink and standard dimensions (11 mm size, 3.97 mm thickness) ensure the insert seats reliably in compatible external holders and boring bars for repeatable clamping. Can this insert be used for finishing passes? Yes, the 0.2 mm nose radius and stable cutting edge geometry support fine finishes on semi-finishing and finishing cuts when combined with appropriate feeds and speeds for the material. Is the chip control suitable for interrupted cuts? The single-sided chipbreaker promotes predictable chip formation and evacuation, improving performance in both continuous and interrupted turning applications. What identifiers should be used when ordering this insert? Reference the DCMT11T302 AH8005 Tungaloy turning insert and SKU 6775794-Tungaloy when enquiring about availability and stock. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated cemented carbide and a precision 55° rhombic geometry to secure consistent cutting performance and tool life in turning operations; order directly via Metav Werkzeuge or request specialist advice from our consultants for optimal holder matching. DCMT 11T302 AH8015 Tungaloy indexable insert for turning (55° rhombic, PVD-coated) A DCMT11T302 AH8015 ISO rhombic indexable insert designed for general external and internal turning of heat‑resistant alloys, offering a compact geometry and stable cutting edge. ISO rhombic 55° geometry PVD-coated cemented carbide AH8015 0.2 mm corner radius for fine surface finish Single-sided chipbreaker for stable chips Cylindrical hole with 40°–60° countersink Consistent performance with a PVD-coated carbide grade The combination of a PVD-coated cutting layer and the AH8015 carbide grade yields a well balanced compromise between wear resistance and edge stability, particularly suited to turning heat‑resistant alloys. The 55° rhombic form and a 7° clearance angle enable predictable chip formation and repeatable insert indexing, which contributes to reduced tool change frequency and higher process uptime. This technical balance translates directly into lower unit costs per component and dependable results in batch and single‑piece production. Predictable chip control and improved productivity The single‑sided chipbreaker geometry supports controlled chip evacuation under a wide range of cutting conditions, improving surface quality and reducing the risk of rework. Compatibility with the overall system—insert, holder, shim and screw—is determined by geometry, clearance, tolerance class and thickness; ensuring the correct combination enhances process stability and reduces vibration. Where cycle time and repeatability are critical, this insert delivers measurable gains in machining consistency and operator confidence. Straightforward integration and secure clamping for reliable handling With a 0.2 mm corner radius, 3.97 mm thickness and a cylindrical hole with a one‑sided countersink (40°–60°), the insert is designed for secure mounting and simple replacement. The ISO series construction simplifies procurement and holder selection for standard turning toolposts or boring bars, while the rhombic shape provides versatile orientation options for external and internal turning. For precise part tolerances and improved finish, the insert’s geometry supports controlled cutting engagement and consistent chipbreaking. Contact Metav Werkzeuge for tailored holder recommendations and specify SKU TUN6951222 when requesting technical matching; expert advice is available by email or phone through Metav Werkzeuge to ensure the best tool system configuration Technical data Article number: 6951222 Manufacturer SKU: TUN6951222 Label: 6951222-Tungaloy Item name: DCMT11T302 AH8015 Tungaloy‑indexable insert Facts Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Geometry angle: 55° Hole: cylindrical with one‑sided countersink (40°–60°) Special features PVD‑coated cemented carbide (AH8015) Rhombic 55° shape Single‑sided chipbreaker ISO‑series turning indexable insert Suitable for external and internal turning of heat‑resistant alloys System requires compatible holder, shim and clamping screw FAQ What materials is this insert designed to machine? The DCMT11T302 AH8015 indexable insert is optimised for heat‑resistant alloys; the PVD‑coated AH8015 grade provides a balance of wear resistance and edge stability for such materials. How does the chipbreaker affect cutting performance? The single‑sided chipbreaker promotes controlled chip formation and evacuation, which supports consistent surface finish and reduces the likelihood of chip entanglement during turning operations. What dimensions are critical for holder compatibility? Key dimensions are the insert size (11 mm), thickness (3.97 mm), clearance angle (7°) and hole style; matching these to the holder ensures secure clamping and stable cutting behaviour. Can this insert be used for both internal and external turning? Yes, the rhombic 55° geometry and compact form factor make the insert suitable for both external and internal turning when paired with an appropriate holder. Which identifier should be provided when ordering or requesting data? Please reference the manufacturer SKU TUN6951222 or article number 6951222 when ordering or requesting technical documentation. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced combination of a PVD‑coated AH8015 grade and a 0.2 mm corner radius for reliable machining of heat‑resistant alloys; the ISO format ensures straightforward holder compatibility. Order the insert directly via Metav Werkzeuge or consult our technical advisors for holder selection and availability. DCMT11T302 AH8015 ISO rhombic turning insert by Tungaloy — PVD‑coated, 0.2 mm radius The DCMT11T302 AH8015 is an ISO‑format rhombic insert designed for precision external and internal turning of heat‑resistant alloys, combining wear resistance with cutting‑edge stability for general machining. ISO rhombic insert, 55° cutting geometry PVD‑coated AH8015 for heat‑resistant alloys 0.2 mm corner radius for accurate profiling Cylindrical hole with one‑side countersink for secure clamping Reliable wear resistance with balanced edge stability The combination of a PVD coating and the AH8015 grade delivers a balance between wear resistance and edge robustness, making this insert well suited to machining heat‑resistant alloys. PVD (physical vapour deposition) forms a thin, hard layer that reduces adhesive and abrasive wear under elevated temperatures; this helps to extend tool life and maintain consistent part quality. The single‑sided chipbreaker minimises built‑up edge and promotes predictable chip formation, which supports efficient material removal and repeatable surface finish. Secure clamping and geometries that reduce vibration ISO compatibility is ensured by the standardised geometry: the rhombic form with a 55° cutting angle and 7° relief provides stable cutting engagement, while the 3.97 mm plate thickness and 0.2 mm corner radius aid in producing fine profiles and radiused features. The insert is supplied with a cylindrical hole and a one‑side countersink (40°–60°), allowing secure fastening with appropriate screws and seatings. Stable clamping reduces chatter and improves tool life, which in turn lowers machining downtime and scrap rates. Practical application guidance for productive turning Intended for general turning, including both external and internal operations, this insert performs best when the chipbreaker and grade are matched to the workpiece material and machining conditions. The AH8015 grade is recommended as a first choice for many heat‑resistant alloys due to its balanced properties; selecting a stiffer holder and optimised cutting parameters will enhance repeatability and surface integrity. For shops seeking dependable, economical machining, the combination of PVD‑coated carbide, standard ISO sizing and a modest corner radius offers a pragmatic route to consistent results and simplified tool inventory. For recommendations on holder compatibility or to reserve original Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on the right chipbreaker and fastening parts for the application. Technical data Manufacturer article number: 6760856 Manufacturer SKU: TUN6760856 Metav SKU: 6760856-Tungaloy Model series: ISO turning inserts Product name: DCMT11T302 AH8015 Tungaloy insert Core specifications Cutting geometry: 55° Corner radius: 0.2 mm Plate thickness: 3.97 mm Size: 11 Relief (free) angle: 7° Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features Grade / coating: AH8015, PVD‑coated carbide Shape: rhombic Chipbreaker: single‑sided Application: turning (external and internal) Compatibility: ISO standard holders — form, relief, tolerance, attachment, size, thickness FAQ Is this insert suitable for machining heat‑resistant alloys? The DCMT11T302 AH8015 insert is specifically recommended for the general machining of heat‑resistant alloys, as the AH8015 grade provides a balanced combination of wear resistance and edge stability. Which holder characteristics must be checked for correct fit? Compatibility depends on holder form, relief angle, tolerance class, attachment method, size and plate thickness; the insert conforms to ISO dimensions, so confirm these parameters against the intended external or internal turning holder. What advantage does the PVD coating offer on this grade? The PVD coating on the AH8015 carbide reduces adhesive and abrasive wear at elevated temperatures, supporting longer cutting life and more consistent surface quality during continuous turning cycles. Can the insert be used for both external and internal turning? Yes — the geometry and neutral chip control make the DCMT11T302 suitable for both external and internal turning when the correct holder and cutting parameters are chosen. What does the hole and countersink specification mean for clamping? The cylindrical hole with a one‑sided countersink (40°–60°) allows reliable engagement with standard clamping screws and seats, ensuring secure fixation and reduced risk of insert movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 AH8015 Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge behaviour combine with ISO compatibility to support consistent production of heat‑resistant alloys; precise geometry and a secure mounting hole reduce setup time and vibration. Order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT11T302 AH8015 – ISO rhombic turning insert, PVD-coated carbide, 55° geometry by Tungaloy The DCMT11T302 AH8015 is an ISO rhombic turning insert intended for general turning of heat‑resistant alloys and similar materials, offering a balanced combination of wear resistance and cutting‑edge stability for reliable workshop performance. PVD-coated carbide AH8015 for heat-resistant alloys ISO rhombic 55° shape for versatile turning 0.2 mm corner radius for controlled chip formation Single-sided chipbreaker with cylindrical hole and countersink Longer tool life through balanced material and coating The DCMT11T302 AH8015 insert combines a PVD-coated carbide substrate with the AH8015 grade to deliver a balanced compromise between wear resistance and edge stability. This balance means fewer tool changes and longer intervals between regrinds, which directly reduces downtime and increases throughput in continuous and batch production. The coating improves heat tolerance during higher cutting speeds, supporting sustained performance on demanding alloys. Geometry that simplifies holder selection and improves clamping The ISO rhombic geometry with a 55° included angle and a 7° relief provides predictable cutting directions and straightforward ISO‑holder compatibility. The insert’s 3.97 mm thickness and 11 mm size conform to common ISO standards, so replacement and interchange are rapid when the holder, tolerance class and fastening match. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and consistent seat position, contributing to repeatable accuracy and less vibrational chatter. Controlled chips and better surface finish With a single‑sided chipbreaker and a 0.2 mm corner radius, the insert produces compact chips and a fine surface quality under appropriately selected cutting parameters. The modest corner radius is engineered to give a compromise between a robust cutting edge and the potential for good finishes in finishing and light semi‑finishing operations. Selecting a chipbreaker and grade tuned to workpiece stability and material supports predictable swarf behaviour and reduces secondary operations. Integration into workshop processes and practical benefits The PVD‑coated grade and ISO form make the insert a practical choice for workshops seeking consistent results on heat‑resistant alloys: reduced rework, straightforward inventory management and a familiar clamping routine. Spare screws, clamping sets and support pads form the complete system around the insert; compatibility is determined by form, freestanding angle, size, thickness and tolerance class. For specific process parameters or coating requirements, Metav Werkzeuge’s technical team can advise on cutting data and optimal chipbreaker selection. Contact Metav Werkzeuge for expert advice on application‑matched Tungaloy inserts and to order the DCMT11T302 AH8015 for reliable machining of heat‑resistant alloys Technical data Article number: 6951230-Tungaloy Manufacturer article number: 6951230 Manufacturer SKU: TUN6951230 Model series: ISO turning indexable inserts Name: DCMT11T302 AH8015 Tungaloy insert Numbers / Core technical data Plate size: 11 mm Plate thickness: 3.97 mm Relief angle: 7° Included angle: 55° Corner radius: 0.2 mm Designs / Special features Material: PVD-coated carbide (AH8015) Shape: rhombic, ISO 55° geometry Chipbreaker: single-sided Hole: cylindrical hole with single-side countersink 40°–60° Application: turning (external and internal) Compatibility: ISO holder determined by form, size and tolerance class FAQ Which materials are best machined with this insert? The DCMT11T302 AH8015 insert is optimised for heat‑resistant alloys, offering a good balance of wear resistance and edge stability; it is suitable for general turning applications where elevated temperatures occur. Which toolholders fit this insert? Holders complying with the ISO form and matching the insert’s size, thickness and tolerance class are required; secure clamping is achieved via the insert’s cylindrical hole and single‑side countersink specified for the DCMT11T302 AH8015 insert. How does the single‑sided chipbreaker influence cutting? The single‑sided chipbreaker promotes predictable chip formation and eases chip evacuation, which benefits surface finish and reduces the risk of entanglement in many turning operations. Is the 0.2 mm corner radius suitable for finishing? A 0.2 mm corner radius provides a compromise between edge strength and surface quality and is appropriate for light finishing and semi‑finishing tasks when combined with suitable cutting parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 AT9530 Wendeplatten - Tungaloy
Optimise turning operations with a coated cermet AT9530 grade and precise DCMT geometry for consistent surface quality and uniform wear; order the insert directly via Metav Werkzeuge or consult our specialists for compatibility advice. DCMT 11T302 AT9530 turning insert for finishing – Tungaloy The DCMT11T302 AT9530 is an ISO rhombic turning insert engineered for finishing and light machining of steel, prioritising excellent surface finish and steady wear behaviour. ISO rhombic insert DCMT 11T302 AT9530 coated cermet for fine finishes 0.2 mm corner radius for precision profiles Improve surface quality with a coated cermet grade The coated cermet grade AT9530 is tailored for finishing and light-cutting operations on steel, emphasising a superior surface finish and uniform wear over the tool life. As a finishing grade, the microstructure and coating combination support stable cutting edges at the lower cutting depths typical of final passes. This results in fewer rework cycles and a predictable wear pattern, which helps maintain part tolerances and reduces inspection effort. The paragraph focuses on measurable benefits rather than broad claims, highlighting why a fine-grade insert is appropriate for high‑quality turned surfaces. Precision geometry for reliable seating and repeatability The insert features a rhombic form with a 55° geometry, a 0.2 mm corner radius and a 7° clearance angle, with a plate thickness of 3.97 mm and a nominal size of 11. The mounting includes a cylindrical hole with a single-sided countersink (40°–60°) to suit standard clamping systems. Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness; matching these parameters ensures accurate seating, repeatable indexation and consistent chip flow. Such geometry data are decisive for fixture selection and process planning in production environments. Application guidance to increase productivity and predictability Intended for turning where surface integrity is a priority, the insert pairs with a matching single-sided chipbreaker and the correct holder to balance chip control and stability. Selecting the appropriate chipbreaker and grade according to workpiece material and machine stability improves cycle consistency and reduces scrap rates. If pockets of hard inclusions or heavy interrupted cuts are expected, the grade’s characteristics suggest limiting depth of cut and favouring finishing passes; for more aggressive material removal, consider alternative grades designed for roughing. Practical guidance and process parameters help integrate the insert into existing turning operations with minimal trial-and-error. For applications demanding consistent surface finish on steel, contact Metav Werkzeuge for technical consultation about the Tungaloy AT9530 cermet insert or request detailed compatibility checks via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6743131 Specifications Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Geometry/included angle: 55° Countersink: 40°–60° Features / Applications Coating/grade: AT9530 Material: coated cermet Shape: rhombic insert Hole style: cylindrical hole + single-sided countersink Chipbreaker: single-sided Typical application: turning, finishing and light machining of steel Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for machining steel? Yes. The DCMT11T302 AT9530 Tungaloy turning insert is designed specifically for finishing and light machining of steel, with a focus on surface quality and even wear. What is the corner radius and how does it affect the component? The corner radius is 0.2 mm; a smaller radius like this helps produce precise profiles and fine surface finishes while keeping cutting forces moderate. Which holder characteristics must match the insert? Holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; ensure the toolholder matches these parameters for the insert to seat and index correctly. Can this insert be used for roughing operations? This grade is optimised for finishing and light machining; for heavy roughing, a different, more robust grade designed for higher material removal rates is recommended. What are the mounting details for the insert? The plate has a cylindrical hole with a single-sided countersink (40°–60°) and a thickness of 3.97 mm, intended for standard ISO clamping systems and secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 DX120 Wendeplatten - Tungaloy
Benefit from high cutting speeds and exceptional tool life provided by the PCD grade DX120 together with a precise ISO rhombic form for reliable turning results; the combination of PCD performance and a carbide substrate ensures productive machining and predictable tool cycles. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCMT11T302 DX120 — ISO rhombic PCD turning insert by Tungaloy, 55° main angle A DCMT11T302 DX120 ISO turning insert engineered for high-speed external and internal turning of aluminium, non-ferrous metals and abrasive non-metals. PCD grade DX120 for extended tool life Rhombic 55° geometry for diverse turning tasks 7° relief angle for stable chip formation Cylindrical hole with 40°–60° countersink High-speed performance for non-ferrous machining The insert uses polycrystalline diamond (PCD) in grade DX120, specifically developed for aluminium and other non-ferrous materials to deliver superior wear resistance and sustained cutting-edge integrity at elevated cutting speeds. The diamond cutting layer atop a carbide substrate enables very long tool life and consistent surface finishes where abrasive inclusions or fibrous materials would otherwise accelerate wear. By converting the technical properties of PCD into practical advantages, the tool reduces downtime caused by frequent tool changes and contributes to a smoother production flow. Reliable geometry and secure clamping for predictable results Designed as an ISO rhombic plate with a nominal 55° main angle and a 0.2 mm nose radius, the insert offers a balance between strength and profile accuracy for fine and semi-finish turning operations. The 7° relief angle supports positive cutting engagement and helps control chip evacuation, while the cylindrical hole with one-sided countersink (40°–60°) ensures repeatable seating and secure fastening in standard ISO-compatible holders. These mechanical details translate into consistent part tolerances and reduced variability across batches when the correct holder, size and tolerance class are matched. Efficiency, economy and material versatility Using the DX120 grade allows for aggressive feeds and speeds in the right workpiece classes, shortening cycle times and improving throughput. The PCD cutting layer resists built-up edge and maintains a sharp cutting face far longer than conventional carbide grades when machining aluminium and abrasive non-metals. In practice, this can lower tooling cost per component and raise overall process reliability — a clear economic argument for shops aiming to increase productivity without compromising surface quality. Practical considerations for integration The ISO-series design simplifies tool inventory: the plate fits holders determined by plate shape, thickness and hole style. With a plate thickness of 3.97 mm and a plate size of 11 mm, the insert suits compact setups and allows selection of matching toolholders or boring bars for internal work. When selecting a chipbreaker and specific grade, align the cutter geometry with the workpiece alloy, machining operation and system rigidity to exploit the full potential of the DX120 cutting material. Contact Metav Werkzeuge for tailored tooling recommendations or to order the DCMT11T302 DX120 insert from Tungaloy; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6822159 Manufacturer SKU: TUN6822159 SKU: 6822159-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning WPL designation: DCMT11T302 DX120 Facts Plate size: 11 mm Plate thickness: 3.97 mm Nose radius: 0.2 mm Relief angle: 7° Main angle: 55° Special features Cutting material: polycrystalline diamond (PCD) — DX120 Substrate: carbide Plate form: rhombic Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided ISO designation: 11T302 FAQ What materials is this insert suited for? The DCMT11T302 DX120 insert is intended for aluminium, non-ferrous metals and abrasive non-metals; the DX120 PCD grade provides excellent wear resistance for these materials. Can the insert be used for both external and internal turning? Yes, the ISO rhombic geometry and the available sizes make the insert suitable for both external and internal turning when paired with a compatible holder. How does the PCD DX120 grade affect cutting parameters? The polycrystalline diamond cutting layer of DX120 allows higher cutting speeds and longer tool life compared with conventional grades, enabling more productive machining for suitable workpieces. What is the significance of the 7° relief angle and 0.2 mm nose radius? The 7° relief angle reduces rubbing and supports stable cutting action, while the 0.2 mm nose radius offers a compromise between surface finish capability and edge strength for finishing operations. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the ISO designation facilitates selection of matching external holders or boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 GH730 Wendeplatten - Tungaloy
Benefit from the combination of GH730 wear resistance and precise 0.2 mm corner radius for consistent turning performance; the ISO-compatible geometry ensures reliable fitment and stable chip formation on external and internal operations. Order the DCMT11T302 GH730 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if required. DCMT 11T302 GH730 turning insert by Tungaloy — rhombic ISO insert with 7° relief The DCMT11T302 GH730 turning insert is an ISO-standard rhombic insert designed for general turning applications, offering a balance of wear resistance and edge stability for a wide range of steels and alloys. DCMT11T302 GH730 grade by Tungaloy Rhombic 55° geometry, 0.2 mm radius 7° relief angle for reliable clearance Cylindrical hole with 40°–60° countersink Faster machining through optimised material grade and edge geometry The GH730 grade combines enhanced wear resistance with fracture toughness to extend tool life under varied cutting conditions. Thanks to the carbide substrate and optimised microstructure, the insert maintains a stable cutting edge over longer tool cycles, which translates into fewer indexings and reduced tool-change downtime. The 0.2 mm corner radius supports modest finishing feeds while preserving tool strength, and the single-sided chipbreaker design promotes controlled chip formation, lowering the risk of re-cutting and improving surface consistency on turned components. Secure clamping and ISO compatibility for predictable setups Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation DCMT11T302 ensures predictable interchangeability across standard external holders and boring bars. The insert’s rhombic shape with a 55° included angle offers flexibility for both external and internal turning, while the cylindrical hole with single-side countersink (40°–60°) provides positive seating and reliable repeatability in the seat. For workshop planning, include a suitable outer holder or boring bar, a shim or clamp set and replacement screws to complete the system. Practical benefits and application advice for everyday turning Selecting the GH730 sort complements the insert’s geometry by balancing wear resistance and edge stability, making it suitable for turning operations on a broad range of steels and alloyed materials. The moderate thickness of 3.97 mm contributes to mechanical stiffness in the clamp, reducing vibration in less rigid setups. When choosing cutting parameters, favour stable setups and moderate depths of cut to exploit the grade’s durability; a more conservative feed with the 0.2 mm radius will improve finish while preserving edge life. This combination is especially effective for mixed-batch production where process reliability matters. For precision turning tasks that require a dependable combination of edge stability and wear resistance, choose the Tungaloy DCMT11T302 GH730 insert and contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Manufacturer article number: 6820985 SKU: 6820985-Tungaloy Manufacturer SKU: TUN6820985 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Material: Carbide Facts Size (inscribed circle): 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Special features ISO designation: DCMT11T302 Grade: GH730 (Tungaloy) Plate form: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) System elements: insert, compatible outer holder or boring bar, shim/clamp set and replacement screws FAQ What materials is the DCMT11T302 GH730 best suited for? The DCMT11T302 GH730 Tungaloy insert is engineered for reliable performance across a wide range of steels and alloyed materials, providing a balance of wear resistance and toughness for general turning. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius on the DCMT11T302 GH730 insert helps achieve improved surface quality at finishing feeds while maintaining adequate edge strength for typical turning tasks. Is this insert compatible with standard ISO holders? Yes, the DCMT11T302 conforms to ISO geometry standards and will be compatible with holders that match form, relief angle, tolerance class, fastening and size requirements. What role does the single-sided chipbreaker play? The single-sided chipbreaker on the DCMT11T302 GH730 insert controls chip form and evacuation, reducing the chance of chip interference and contributing to consistent surface results. Which SKU should be referenced when ordering? When ordering, reference SKU 6820985-Tungaloy or manufacturer article number 6820985 to ensure the correct DCMT11T302 GH730 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 GH730 Wendeplatten - Tungaloy
High wear resistance and a stable cutting edge ensure consistent, repeatable turning results; the ISO rhombic 55° geometry combines versatility for external and internal turning with reliable chip control. Order the DCMT11T302 GH730 insert directly via Metav Werkzeuge or request assistance from our consultants for optimal selection. DCMT11T302 GH730 — ISO rhombic turning insert for general turning, Tungaloy DCMT11T302 GH730 is an ISO rhombic turning insert engineered for versatile external and internal turning where a balance of wear resistance and edge stability is required. ISO rhombic 55° geometry GH730 Tungaloy carbide grade Through-hole with countersink 0.2 mm corner radius Durable cutting performance from the GH730 grade The GH730 grade from Tungaloy is tailored to provide a combination of wear resistance and toughness that suits a wide range of turning tasks. Made of sintered carbide, this grade reduces flank wear and helps maintain a consistent tool life under mixed cutting conditions. For production environments where downtime and rework cost money, the grade’s balanced properties deliver measurable efficiency gains: fewer indexings, steadier surface finish and predictable edge behaviour. The result is a more stable machining process, especially when paired with suitable chipbreaker geometry. Geometry and holder compatibility for flexible turning The rhombic design with a 55° point angle offers flexibility for both external and internal turning when the correct holder is selected. The insert is supplied with a through-hole and a cylindrical hole plus one-sided countersink (40°–60°), enabling secure clamping in standard ISO-compatible holders. Note that compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; selecting the correct combination ensures accurate seat contact and repeatable clamping. The single-sided chipbreaker improves chip formation for many light to medium cutting operations and helps to avoid chip entanglement in confined bores. Practical dimensions and handling for production efficiency With a nominal size of 11 mm, a plate thickness of 3.97 mm and a corner radius of 0.2 mm, the insert is suitable for finishing and light roughing where small radii and fine surface quality matter. The 7° relief angle and the rhombic profile support predictable cutting forces and allow efficient use of standard holders. For process planners, the compact thickness and standard ISO form simplify stocking and changeover. Where a change in chip control is required, selecting alternate chipbreaker styles or complementary grades can be done without changing established clamping hardware, reducing setup time and inventory complexity. Application guidance and production benefits Designed primarily for turning, the insert is ideal for series production as well as single-part machining where consistent edge life is important. The combination of Tungaloy carbide technology and ISO conformity supports high process reliability, reduced tool consumption and stable surface finish—advantages that translate into lower total machining costs and improved shop-floor predictability. For new setups, pairing the insert with a matched external holder, appropriate shim and the correct clamping screw will deliver the expected repeatability in concentricity and cutting performance. For secure, high-performance turning with Tungaloy GH730, contact Metav Werkzeuge to discuss application-specific recommendations and ordering options. Technical Data Article number: 6820986 SKU: 6820986-Tungaloy Manufacturer SKU: TUN6820986 Model series: ISO turning indexable inserts Material: carbide Dimensions & Core Data Insert size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Geometry angle: 55° Countersink angle range: 40°–60° Design & Features Rhombic plate form Through-hole with cylindrical hole + one-sided countersink Single-sided chipbreaker Grade: GH730 Intended application: turning ISO designation: DCMT11T302 FAQ Which materials are suitable for this insert? The DCMT11T302 GH730 insert is optimised for general turning applications and is suitable for a broad range of materials when the correct chipbreaker and cutting data are selected; the GH730 grade balances wear resistance and toughness for many steels and alloyed materials. Is the insert compatible with standard ISO holders? Yes, the DCMT11T302 conforms to ISO plate dimensions; compatibility depends on holder form, relief angle, tolerance class and fastening method, so match the insert’s 11 mm size and hole/countersink arrangement to the holder specifications. What advantage does the 0.2 mm corner radius provide? A 0.2 mm corner radius offers improved surface finish and reduced cutting forces for finishing passes, while still providing sufficient edge strength for light roughing in many turning operations. How does the through-hole with countersink affect clamping? The through-hole plus one-sided countersink (40°–60°) secures the insert centrally and improves seat stability, minimising movement under cutting loads and enabling repeatable positioning in ISO-compatible clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a GT9530 coated cermet grade, precise 0.2 mm corner radius, and ISO compatibility for consistent finishing results and longer tool life; order directly via Metav Werkzeuge or consult the in-house experts if application advice is required. DCMT11T302 GT9530 Tungaloy insert for turning — rhombic, 11 mm, 7° relief DCMT11T302 GT9530 is an ISO-format indexable insert intended for finishing to light universal turning of steel, optimised for applications that demand good surface quality and extended tool life. Durable GT9530 coated cermet grade Rhombic ISO DCMT 11 mm format 7° relief for reduced rubbing 0.2 mm corner radius for fine surface finish Engineered for reliable finishing and longer tool life The GT9530 grade is a coated cermet developed for wear resistance and excellent surface quality when machining steel under stable conditions. A cermet combines ceramic and metallic binder phases to reduce built-up edge and improve finish; the applied coating further extends tool life by enhancing abrasion resistance. As an ISO indexable insert, this part integrates into standard holder systems, providing predictable performance and reduced process variability. The resulting benefit is a lower cost per part in series production and more consistent component quality. Geometry that supports precision and secure clamping The rhombic DCMT geometry with an 11 mm insert size and 3.97 mm thickness delivers a balance between rigidity and accessibility for external and internal turning. The 0.2 mm corner radius produces a fine machined surface while limiting cutting forces for light finishing passes. A 7° relief minimises flank rubbing and helps maintain dimensional accuracy across the tool life. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) for standard clamping arrangements, ensuring secure mounting and reproducible positioning in compatible toolholders. Application guidance and process advantages Designed for turning, the insert is best used for finishing and light universal cuts on steel where stable clamping and machine conditions exist. Selection of the one-sided chipbreaker and choice of cutting parameters should match workpiece material and setup rigidity to achieve the advertised surface quality and tool life. Compatibility to the holder is governed by insert form, relief angle, tolerance class, fixing method, size and thickness; matching these parameters ensures safe operation and easy indexing. For workshops aiming to reduce downtime and increase first-pass quality, this insert offers a pragmatic route to consistent results. Contact Metav Werkzeuge today for personalised cutting data and to order the Tungaloy DCMT11T302 GT9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-oriented advice Technical data Article number: 6998337 Manufacturer SKU: TUN6998337 Seller SKU: 6998337-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Designation: DCMT11T302 Facts Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Manufacturer article number: 6998337 Special features Grade/coating: GT9530 Cutting material type: coated cermet Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Plate form: rhombic Application: turning FAQ Is this insert suitable for finishing steel? The DCMT11T302 GT9530 Tungaloy insert is tailored for finishing to light universal turning of steel, offering improved surface finish and extended tool life in stable machining conditions. What does the GT9530 designation mean? GT9530 denotes a coated cermet grade optimised for wear resistance and surface quality; the coating improves abrasion resistance while the cermet substrate reduces the tendency for built-up edge. How is the insert clamped in the holder? Clamping uses the cylindrical hole with a one-sided countersink (40°–60°); compatibility with a specific holder depends on form, relief angle, tolerance class, fixing method, size and thickness. Can the insert be indexed for multiple cutting edges? As an ISO-format indexable insert, the part is designed for indexing where the geometry and holder permit; adherence to the specified orientation and clamping ensures repeatable positioning. Which chipbreaker should be used for a given job? The listed insert features a one-sided chipbreaker; selection of chipformer and cutting parameters should follow the workpiece material, cutting conditions and machine rigidity for optimal swarf control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet grade (GT9530) that delivers consistent wear resistance and an improved surface finish in stable turning operations; the rhombic form with a 0.2 mm corner radius and 7° clearance ensures repeatable geometry and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our application specialists for cutting parameter recommendations. DCMT11T302 GT9530 — Tungaloy turning insert, coated cermet for finishing DCMT11T302 GT9530 is an ISO-format rhombic insert designed for finishing and light universal turning on steel, combining a coated cermet grade with a single-sided chipbreaker for reliable surface quality. Coated cermet GT9530 grade for finishing Rhombic form with 55° included angle Single-sided chipbreaker for stable chips 0.2 mm corner radius for fine edges Delivering a consistent finish and extended tool life The GT9530 coating in a coated cermet formulation is engineered for wear resistance during finishing operations, translating into stable component surfaces and fewer tool changes. In practice, this grade is suitable for turning steel components where improved surface quality is required under steady machining conditions. The combination of a fine 0.2 mm corner radius and a dedicated chip control geometry helps maintain edge integrity and reduces the frequency of rework, supporting uninterrupted production cycles. Predictable fitment and mounting for ISO tooling systems Produced to ISO dimensions, the insert’s rhombic shape and 55° included angle ensure compatibility with standard holders when form, clearance, tolerance class, fastening method, size and thickness match. The 7° clearance and 3.97 mm plate thickness contribute to secure seating and mechanical stability. The centre cylindrical hole with a single-side countersink (40°–60°) provides straightforward clamping and replacement, enabling rapid toolset changes and consistent concentricity in both external and internal turning setups. Productivity advantages through reliable chip control The single-sided chipbreaker design manages swarf effectively in finishing passes, which reduces downstream cleaning and machine stoppages. Under stable process conditions the GT9530 grade offers longer tool life relative to uncoated finishing grades, thereby lowering tool consumption and increasing spindle uptime. Optimised chip formation also supports predictable surface metrics, helping to meet inspection criteria with fewer corrective operations. Practical application guidance and system considerations As part of an ISO insert system, the item is intended to be used with a matching external holder or boring bar, plus the appropriate shim and clamping set plus replacement screws. The grade is recommended for finishing to light universal turning on standard steels; selection of a compatible chipbreaker and holder depends on component rigidity and machine stability. For optimal results, pair the insert with a stable clamping arrangement and adjust feed to maintain the small corner radius; this approach preserves the edge and preserves surface integrity for subsequent processes. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts and to arrange delivery or sample testing; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6998325 Manufacturer SKU: TUN6998325 Label/SKU: 6998325-Tungaloy Type designation: DCMT11T302 Grade: GT9530 Facts Corner radius: 0.2 mm Thickness: 3.97 mm Size: 11 mm Clearance angle: 7° Included angle: 55° Mounting: with hole Special features Coated cermet grade GT9530 Rhombic insert form Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO-format turning insert Intended application: turning Material information: carbide-compatible construction for insert body FAQ What materials is this insert suited for? The GT9530 grade is formulated for machining steel in finishing to light universal turning; the DCMT11T302 geometry supports good surface quality when used under stable conditions. How is the insert clamped in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) for positive clamping; compatibility depends on matching the holder to the ISO dimensions and fastening arrangement. Can the DCMT11T302 GT9530 be used for internal turning? Yes — the rhombic form and chip control suit both external and internal turning provided the boring bar and machine setup offer sufficient rigidity. What are the key geometry details to check before installation? Verify the 55° included angle, 7° clearance, 3.97 mm thickness and the 0.2 mm corner radius to ensure correct seating and expected cutting performance. Is this insert supplied by Tungaloy as an original product? The insert is an original Tungaloy item listed under SKU 6998325-Tungaloy and supplied new by the manufacturer. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of wear-resistant GT9530 coating, precise DCMT geometry and clear dimensional data to increase process stability and surface quality in turning operations. Order the DCMT11T302 GT9530 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T302 GT9530 indexable insert for turning (Tungaloy) DCMT11T302 GT9530 is an ISO-designation indexable insert for external and internal turning applications, offering a cermet grade tailored to finishing and light universal machining of steel. DCMT 11T302 geometry for ISO turning Coated cermet GT9530 for long tool life 7° clearance angle for stable finishing Cylindrical hole with countersink 40°–60° Improved surface finish and extended tool life for finishing The GT9530 grade is a coated cermet developed for wear resistance in finishing and light universal turning of steel under stable machining conditions. Its composition and coating reduce notch wear and promote a consistent cutting edge, which translates into a better surface finish and longer intervals between insert changes. For operations where a fine part finish and predictable tool life are priorities, this grade offers measurable advantages in uptime and component quality. ISO compatibility and secure clamping for repeatable results The insert conforms to ISO geometry, designated as DCMT11T302, which aids compatibility with standard external holders and boring bars. Critical geometric data — size 11, thickness 3.97 mm, corner radius 0.2 mm and a 7° clearance angle — determine holder selection and clamping fit. Ensuring the correct form, clearance, tolerance class, fastening method, size and thickness maintains repeatable seating and stable cutting conditions, reducing vibration and the risk of machining errors. Practical application guidance for turning tasks Designed primarily for external and internal turning, the insert is most effective when paired with an appropriate single-sided chipbreaker and when machining parameters are matched to the workpiece material and machine rigidity. The one-sided chipbreaker supports controlled chip formation in finishing passes, while the coated cermet composition favours consistent edge condition during serial work. For light universal cutting or when a high-quality surface is required, this insert provides a reliable balance between finish and life. Selection and handling recommendations to optimise performance Select the chipbreaker and grade according to the workpiece material and the intended cut. The cylindrical hole with a single-sided countersink (40°–60°) secures the insert in many standard clamping systems; confirm compatibility with the clamping screw and seat. Store inserts in their original packaging to protect edges, and replace inserts before edge degradation affects part quality. For specific mounting or process advice, consult technical documentation or seek application support to align holder geometry, cutting data and machine rigidity. For application-specific recommendations on the Tungaloy GT9530 cermet insert and support with holder selection, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and rapid delivery. Technical data Article number: 6998328 Manufacturer SKU: TUN6998328 Model series: ISO turning indexable inserts Grade: GT9530 Material: cemented carbide Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Special features ISO designation: DCMT11T302 Coated cermet GT9530 One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Suitable for external and internal turning in stable conditions FAQ Which machining operations suit this insert best? This insert is intended for external and internal turning; the GT9530 grade focuses on finishing to light universal operations where a good surface finish and extended tool life are required. What materials can be machined with this grade? The GT9530 coated cermet is optimised for machining steel in stable conditions, providing improved wear resistance for finishing applications. How does the GT9530 grade affect process stability? The coated cermet composition of GT9530 helps maintain a stable cutting edge, reducing wear-related variation and supporting consistent surface quality over longer production runs. Which dimensions are critical for holder compatibility? Confirm holder compatibility with the insert’s form, clearance angle, tolerance class, fastening method, size (11) and thickness (3.97 mm); these factors determine secure seating and repeatable clamping. Is this insert suitable for heavy roughing operations? As a finishing to light universal grade, this insert is not optimised for heavy roughing; choose a more robust grade and chipbreaker for high material removal rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and ISO compatibility for consistent production results; order the DCMT11T302 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T302 NS9530 indexable turning insert — uncoated cermet for finishing (Tungaloy) The DCMT11T302 NS9530 is an ISO-standard indexable insert for turning, optimised for finishing Stahl with a sharp cutting edge and low cutting forces. Sharp edge for superior surface finish Uncoated cermet for fine finishing Rhombic 11 mm form, 0.2 mm radius Single-sided chipbreaker with hole Achieve finer surfaces with lower forces The insert’s uncoated cermet grade is formulated for finishing passes on Stahl, delivering a notably improved surface finish with reduced burr formation. The combination of a sharp cutting edge and inherently low friction of the grade results in low cutting forces, which lowers spindle load and helps maintain part geometry during continuous cuts. Compatibility with ISO-standard holders ensures predictable clamping behaviour and interchangeability across common tool systems. Consistent geometry and secure clamping for repeatable results A rhombic plate geometry and the integrated hole with cylindrical seat and single-sided countersink (40°–60°) provide secure location in standard clamping systems. The insert’s 0.2 mm radius and 7° clearance are engineered to balance edge strength with finishing capability, while the single-sided chipbreaker manages chip flow on small depths of cut. These geometric choices support reproducible results on medium- to high-stability setups and reduce the need for frequent rework. Productive finishing grade with reliable tool life The NS9530 finishing grade specialises in continuous cuts and small feed operations, offering stable edge behaviour and consistent productivity. As an indexable insert, it simplifies replacement and inventory management while the underlying carbide substrate sustains cutting-edge integrity over extended runs. The insert is suited to finishing programmes where surface quality and dimensional stability are prioritised over heavy stock removal. For technical selection advice on the Tungaloy DCMT11T302 NS9530 finishing insert and to discuss compatible holders or machining parameters, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application-oriented guidance and rapid availability. Technical data Article number: 6998478 Core specifications ISO designation: DCMT11T302 Size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Geometry angle: 55° Materials & features Material: carbide Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Hole: with hole, cylindrical seat + single-sided countersink (40°–60°) Shape: rhombic Application: turning Manufacturer SKU: TUN6998478 Label: DCMT11T302 NS9530 Tungaloy-Wendeplatte FAQ What materials is this insert designed for? The NS9530 finishing grade is designed primarily for machining Stahl; the DCMT11T302 insert performs best in finishing passes on such materials. Is the insert coated? The DCMT11T302 NS9530 is an uncoated cermet insert, chosen for its fine edge and suitability for finishing operations. What are the key geometric values to consider? Key values include the 0.2 mm corner radius, 7° clearance angle and the 11 mm rhombic form, which together influence edge strength and surface quality. How is chip control achieved with this insert? Chip control is provided by the single-sided chipbreaker integrated into the insert, which is matched to the NS9530 grade for finishing cuts. Which SKU and article number identify this product? This item is listed as SKU 6998478-Tungaloy and manufacturer article number 6998478; the manufacturer SKU is TUN6998478. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade insert that combines a sharp cutting edge, low cutting forces and precise ISO compatibility to improve surface quality and cycle stability. The combination of the NS9530 uncoated cermet grade, a 0.2 mm corner radius and secure clamping features supports consistent finishing performance; order the DCMT11T302 NS9530 Tungaloy insert via Metav Werkzeuge or consult the technical team for selection and application advice. DCMT11T302 NS9530 — ISO turning insert for finishing, Tungaloy A DCMT11T302 NS9530 indexable insert for turning, designed as a rhombic finishing grade for steel with a sharp cutting edge and suitability for continuous cuts and small depths of cut DCMT 11 size, 55° diamond geometry NS9530 uncoated cermet finishing grade Sharp edge for superior surface finish ISO-compatible, cylindrical hole with countersink Achieve superior surface finish with a low-force finishing grade The NS9530 uncoated cermet is specifically developed as a finishing grade for steel, combining a very sharp cutting edge with reduced cutting forces to deliver better surface integrity and reduced vibration during light cutting. Because the grade performs best in continuous cuts and small depths of cut, it is ideal for final passes where surface roughness and dimensional accuracy matter. The fine edge geometry helps reduce material smearing and produces consistent finishes on turned components, supporting higher first-pass quality and fewer downstream operations. Secure clamping and ISO compatibility for reliable setup Built to ISO geometry, the insert’s DCMT11T302 form and dimensional data ensure compatibility with a wide range of standard turning holders when form, clearance angle, tolerance class, fastening method, size and thickness are matched. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for robust clamping, a 3.97 mm thickness and 55° diamond geometry, while the 7° clearance angle improves cutting clearance during turning. These elements together provide a predictable clamping behaviour and repeatable positioning that contribute to process stability and reduced set-up times. Effective chip control and application guidance for turning The single-sided chipbreaker and sharp geometry mean the insert excels at chip formation in finishing cuts where chip size and flow must be controlled to avoid surface damage. Choosing the correct chipbreaker type and grade for the workpiece material and machine rigidity is essential: the presented configuration supports turning of steel under stable cutting conditions and helps lower overall cutting forces. In practice, matching the insert to an appropriate outer holder or boring bar, plus the correct screw and clamping pad, ensures secure fixation and repeatable performance in both external and internal turning tasks. Contact Metav Werkzeuge for tailored advice on selecting and supplying the DCMT11T302 NS9530 Tungaloy finishing insert — technical consultation and order processing are available by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6951232 SKU: 6951232-Tungaloy Manufacturer SKU: TUN6951232 Model series: ISO-Drehwendeschneidplatten Facts Size: 11 Plate thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Wedge/diamond angle: 55° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Uncoated cermet grade NS9530 Single-sided chipbreaker Rhombic plate form (DCMT) Intended use: external and internal turning Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is the insert suited for? The NS9530 grade is formulated as a finishing grade for steel; the DCMT11T302 NS9530 Tungaloy insert performs best on continuous cuts and small depths of cut with steel workpieces. What are the key dimensional values for setup? The insert has a size 11 form, 0.2 mm corner radius, 3.97 mm thickness and a 7° clearance angle, which should be matched to the turning holder and clamping hardware. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole with a one-sided countersink (40°–60°); the thickness and hole geometry contribute to stable fixation when used with a suitable ISO-compatible holder and the correct screw and pad. Can this insert be used for roughing operations? The NS9530 uncoated cermet is a finishing grade optimised for low cutting forces and excellent surface quality; it is not intended as a primary choice for heavy roughing where tougher, more wear-resistant grades are typically required. What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker controls chip formation during finishing cuts, promoting smooth chip flow and reducing the risk of surface damage, which supports consistent part finish and easier chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 NS9530 Wendeplatten - Tungaloy
Combine the NS9530 cermet finishing grade with the precise rhombic geometry and 0.2 mm corner radius for consistent surface quality and reduced cutting forces; order the DCMT11T302 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T302 NS9530 Tungaloy turning insert — ISO rhombic finishing grade, 55° approach A DCMT11T302 NS9530 finishing insert designed for precision external and internal turning of steel, offering a sharp cutting edge for low cutting forces and high surface finish. Cermet finishing grade NS9530 Sharp cutting edge for low cutting forces Rhombic 55° geometry, 0.2 mm corner radius Cylindrical hole with countersink 40°–60° Superior surface quality through a dedicated finishing grade The uncoated cermet grade NS9530 is tailored for finishing operations on steel, delivering a sharp cutting edge that reduces cutting forces and promotes a fine surface finish. In continuous cutting and small depth-of-cut conditions the insert generates stable contact conditions that minimise vibration and improve dimensional consistency. By choosing a grade optimised for finishing, the machining process becomes more predictable and the need for rework is reduced. Reliable fit and straightforward system integration As an ISO‑standard turning insert, compatibility with the toolholder is defined by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert is intended for use within a complete system comprising an appropriate outer holder or boring bar, a support shim or clamp set, and replacement screws. This standardisation simplifies tool management in production environments and ensures repeatable seating and alignment in the toolholder, which supports consistent cutting conditions and part quality. Controlled chips and uninterrupted production flow The single-sided chipbreaker suits the finishing strategy by promoting a controlled chip form when paired with the correct grade and process stability. Predictable chip flow reduces interruption from chip entanglement and tool cleaning, thereby supporting higher machine uptime. Selecting the matching chipbreaker and feed strategy according to workpiece material and approach angle helps to maintain a continuous manufacturing rhythm and improves process reliability. Clear specification for process planning and tool life Key geometric parameters—11 mm size, 3.97 mm plate thickness, 0.2 mm corner radius and 7° clearance angle with a 55° approach—define the insert’s cutting behaviour and mechanical stability. The substrate material is cemented carbide, providing the rigidity required for finishing cuts while the uncoated cermet surface supports low cutting forces and excellent finish. For heavier roughing or interrupted cuts, consider switching to a different grade or geometry to preserve tool life and edge integrity. For selection support, application advice or availability of the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge—technical consultants are available to discuss toolholder compatibility and process parameters; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998470 SKU: 6998470-Tungaloy Manufacturer SKU: TUN6998470 Model series: ISO-Drehwendeschneidplatten Core technical data Size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Lead/approach angle: 55° Special features Rhombic plate form Material: cemented carbide Grade: NS9530 (uncoated cermet) Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Application: external and internal turning, finishing of steel ISO‑standard turning insert FAQ What is the primary application for this insert? The DCMT11T302 NS9530 Tungaloy insert is intended for precision external and internal turning, optimised as a finishing grade for steel. Which materials is the NS9530 grade suitable for? NS9530 is a finishing cermet designed primarily for steel; it offers a sharp edge and low cutting forces for continuous cuts and small depths of cut. How does the 55° geometry influence cutting? The 55° approach angle provides a balanced cutting action suitable for finishing tasks, improving surface quality while maintaining mechanical stability. What holder compatibility factors must be checked? Compatibility depends on insert form, clearance angle, tolerance class, fastening type, size and thickness; verify these parameters against the chosen holder and clamping system. Does the insert have a chipbreaker and what is its effect? The insert features a single-sided chipbreaker designed to produce controlled chips in finishing operations, reducing interruptions and supporting smooth machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com