DCMT 11T302 NS9530 Wendeplatten - Tungaloy
The precise 0.2 mm corner radius combined with the NS9530 uncoated cermet grade and ISO rhombic geometry results in reliably low cutting forces and superior surface finish for finishing operations; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMT 11T302 NS9530 Tungaloy turning insert — ISO rhombic, finishing for steel The DCMT11T302 NS9530 Tungaloy is an ISO rhombic indexable turning insert engineered for finishing cuts on steel, offering a sharp cutting edge and stable chip formation. ISO rhombic insert, compatible with standard holders NS9530 uncoated cermet for fine surface finish 0.2 mm corner radius for precise radiusing Cylindrical hole with countersink for secure clamping Engineered for a finer surface and lower cutting forces The combination of the NS9530 uncoated cermet grade and a sharp edge geometry is aimed at finishing and light machining, delivering a consistently improved surface finish with reduced cutting forces. The cutting material is optimised for continuous cuts and small depths of cut, which reduces vibration and the risk of built-up edge. This leads to more predictable part quality and helps maintain tighter tolerances on turned components. Geometry and clamping that reinforce process reliability The ISO-conforming rhombic shape and the insert’s central cylindrical hole with a single-sided countersink (40°–60°) provide reliable, repeatable clamping in compatible holders. The 55° approach angle contributes to controlled cutting engagement while the standard form and tolerance class ensure compatibility across many commercially available holders, simplifying tool inventory and setup. Setup advantages that increase machining stability A nominal corner radius of 0.2 mm combined with a 7° clearance angle and a plate thickness of 3.97 mm provides a balance between edge strength and the fine finishing required for steel components. The one-sided chipbreaker is tailored for finishing, shaping chips predictably and helping avoid irregular chip formation. These features reduce the need for frequent adjustment and support stable cycle times in production environments. Tailored for finishing steel with predictable results Designed primarily for turning of steel, this insert excels in operations where surface quality and dimensional consistency matter. The uncoated cermet composition is chosen to produce low friction during cutting and to promote a stable cutting edge under continuous-feed conditions. The result is lower rework rates and a smoother downstream process for parts that demand high finishing standards. For finishing operations with the NS9530-grade DCMT insert, contact Metav Werkzeuge for technical consultation or to arrange supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998467 Manufacturer: Tungaloy Manufacturer article number: 6998467 SKU: 6998467-Tungaloy Model series: ISO turning indexable inserts Application: Turning Product name: DCMT11T302 NS9530 Tungaloy turning insert Facts Plate size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Lead/approach angle: 55° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Uncoated cermet grade NS9530 One-sided chipbreaker for finishing Rhombic plate form ISO compatibility with standard holders Intended for finishing steel and continuous cuts System composition: ISO insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert suited for? The DCMT11T302 NS9530 Tungaloy turning insert is designed primarily for finishing on steel; the NS9530 uncoated cermet provides low cutting forces and a fine surface finish for continuous cuts. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, attachment method, size and thickness; the rhombic ISO form and central hole support standard external holders and boring bars. What advantages does the NS9530 grade offer in finishing? NS9530 is an uncoated cermet grade engineered for sharp cutting edges, low cutting forces and high surface quality, particularly effective in continuous-feed finishing operations. How does the chipbreaker affect performance? The one-sided chipbreaker is tuned for finishing cuts to shape chips predictably, reducing the risk of irregular chip formation and supporting stable machining conditions. Is the insert suitable for interrupted cuts or heavy roughing? This insert is optimised for finishing and small depths of cut; for heavy roughing or heavily interrupted cuts, a grade and geometry designed for higher toughness would be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 NS9530 Wendeplatten - Tungaloy
Combining the uncoated cermet NS9530 finishing grade with a precise 0.2 mm corner radius and ISO rhombic geometry delivers consistent surface quality and low cutting forces for continuous turning; order the insert via Metav Werkzeuge or consult our specialists for matching holders and cutting data. DCMT 11T302 NS9530 rhombic turning insert — Tungaloy, finishing grade The DCMT11T302 NS9530 is an ISO-standard rhombic turning insert designed for high-quality finishing of steel in continuous cuts, offering a sharp cutting edge and low cutting forces. ISO rhombic form with 55° cutting angle Uncoated cermet finishing grade NS9530 Corner radius 0.2 mm for fine surface finish Cylindrical hole with 40°–60° countersink Consistent finishing performance for steel turning The NS9530 uncoated cermet grade is formulated for finishing operations on steel, providing a sharp cutting edge and reduced cutting forces that favour continuous cuts and small depths of cut. This results in improved surface integrity and less burr formation compared with general-purpose grades. The insert’s geometry is developed to produce a stable cut with predictable wear behaviour, which supports process reliability and repeatable part quality in production environments. Geometry and holder compatibility that simplify selection The rhombic shape with a nominal 55° cutting angle and an effective relief angle of 7° ensures versatility for both external and internal turning where access and lead angle are critical. Compatibility with a given toolholder depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO designation and dimensions make it straightforward to match the insert to standard external holders or boring bars. Clear knowledge of these parameters reduces setup time and helps avoid mismatches that compromise clamping or cutting performance. Chip control and surface finish benefits A single-sided chipbreaker combined with the fine 0.2 mm corner radius helps to produce narrow, well-formed chips and a high-quality surface finish. For continuous, stable cuts the chip shape encourages predictable evacuation and reduces the risk of re-cutting. In finishing applications the sharp edge geometry lowers cutting forces and heat generation, which contributes to dimensional stability and consistent part appearance across runs. Practical selection and application advice The insert is intended primarily for turning operations on steel where a high-quality finish is required; it is especially suitable for continuous machining and small-width cuts. When selecting the matching holder and cutting parameters, prioritise rigidity and firm clamping to exploit the finishing grade’s strengths. The insert designation and ISO series guidance aid selection for either external holders or boring bars. If further specification or cutting data is required, technical consultation is recommended to ensure optimal process settings for surface finish and tool life. For precision finishing with Tungaloy NS9530, contact Metav Werkzeuge for specialist advice and component matching — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability. Technical data Article number: 6998486 SKU: 6998486-Tungaloy Manufacturer SKU: TUN6998486 Model series: ISO-Drehwendeschneidplatten Numbers / core technical data Corner radius: 0.2 mm Relief angle: 7° Inscribed circle size: 11 mm Plate thickness: 3.97 mm Cutting angle: 55° Designs / special features Uncoated cermet grade NS9530 Single-sided chipbreaker Rhombic plate shape Cylindrical hole with single-sided countersink (40°–60°) Finishing grade for steel Suitable for external and internal turning FAQ Which materials is this insert recommended for? The DCMT11T302 NS9530 is optimised as a finishing grade for steel; the NS9530 uncoated cermet provides a sharp edge and low cutting forces for continuous turning of steel components. What does NS9530 mean in practice? NS9530 identifies the uncoated cermet grade tailored for finishing; in use the NS9530 grade gives a finely honed edge that supports superior surface finish and controlled wear in light finishing cuts. How important is holder selection for this insert? Holder compatibility is essential: form, relief angle, tolerance class, clamping method, size and thickness determine correct fit — the ISO designation simplifies matching to standard turning holders or boring bars. What chip control can be expected? With its single-sided chipbreaker and sharp edge geometry, the insert produces narrow, well-formed chips under stable cutting conditions, aiding evacuation and consistent surface quality. Is this insert suitable for internal turning as well as external? Yes, the rhombic form and 55° cutting angle make the insert suitable for both external and internal turning where access and approach angles permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 NS9530 Wendeplatten - Tungaloy
DCMT11T302 NS9530 Wendeplatte zum Drehen, Tungaloy Die DCMT11T302 NS9530 ist eine ISO-genormte Wendeplatte zum Außen- und Innendrehen, ausgelegt für feine Schlichtbearbeitung von Stahl mit niedrigen Schnittkräften. DCMT11T302 NS9530 Wendeplatte von Tungaloy Unbeschichtetes Cermet für feine Schlichtbearbeitung Scharfe Schneidkante für niedrige Schnittkräfte Rhombische Platte 11 mm, Eckenradius 0,2 mm Mit zylindrischem Loch und einseitiger Senkung Präzision und Oberflächengüte für Schlichtläufe Die DCMT11T302 NS9530 kombiniert ein unbeschichtetes Cermet mit einer besonders scharfen Schneidkante, wodurch sich niedrige Schnittkräfte und eine verbesserte Oberflächengüte erzielen lassen. Anwender profitieren bei kontinuierlichen Schnitten und geringen Zustellungen von gleichmäßigem Spanverhalten und reduzierter Wärmebildung. Das Resultat ist eine reproduzierbare Bauteiloberfläche bei minimalem Nacharbeitaufwand. Geeignet für Stahl und präzise Anwendungen Für die Bearbeitung von Stahl wurde die Sorte NS9530 als Schlichtsorte optimiert; sie liefert hohe Wiederholgenauigkeit bei sehr kleinen Schnitttiefen. Die Platte eignet sich sowohl für Außen- als auch für Innendrehen; dabei entscheidet die Wahl des passenden Halters über Prozessstabilität. Erläuterung: Der Eckenradius beeinflusst die Kerbwirkung und Oberflächenrauheit, deshalb ist der Radius 0,2 mm ideal für feine Schlichtgeometrien. Aufbau und Spannkonzept für stabile Prozesse Die rhombische Form und die Abmessungen gewährleisten eine kompakte Einbaulage im Halter. Die Plattendicke von 3,97 mm zusammen mit dem zylindrischen Loch und der einseitigen Senkung (40°–60°) sorgt für sichere Klemmung und wiederholgenaue Positionierung. Der Freiwinkel 7° reduziert Reibung an der Kontur, während der Winkel von 55° eine ausgewogene Kombination aus Schneidkante und Stabilität bietet. Integration in bestehende ISO-Systeme und Anwendungshinweis Da es sich um eine ISO-genormte Drehplatte handelt, ist die Kompatibilität zu Haltern über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke gegeben. Für beste Ergebnisse sollte ein Spanbrecher entsprechend Werkstoff, Bearbeitungsart und Stabilität gewählt werden; hier ist ein einseitiger Spanbrecher vorgesehen. Bei Unsicherheiten zur Halterwahl oder Schnittdaten hilft eine kurze Abstimmung mit der Anwendungstechnik, um Standzeit und Oberflächenqualität zu optimieren. Für präzise Schlichtbearbeitung empfiehlt Metav Werkzeuge die DCMT11T302 NS9530 von Tungaloy; bei technischen Fragen erreichbar unter info@metav-werkzeuge.com oder +49 2822 7131930. Produktmerkmale Artikelnummer: 6951223 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DCMT11T302 NS9530 Tungaloy-Wendeplatte Hersteller SKU: TUN6951223 Daten Plattengröße: 11 mm Plattendicke: 3,97 mm Eckenradius: 0,2 mm Freiwinkel: 7° Winkel: 55° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 (Schlichtsorte für Stahl) Spanbrecher: einseitig Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen ISO: ISO-genormt für Wendeplatten, Industriestandard für Werkzeugaufnahme FAQ Für welche Werkstoffe ist diese Wendeplatte geeignet? Die Wendeplatte DCMT11T302 NS9530 von Tungaloy wurde speziell für die Schlichtbearbeitung von Stahl entwickelt und liefert dort niedrige Schnittkräfte und hohe Oberflächengüten. Welche Vorteile bietet das unbeschichtete Cermet? Unbeschichtetes Cermet reduziert Reibung bei feinen Schnitten und sorgt für konstante Schneidkantengeometrie, was bei der DCMT11T302 NS9530 zu besserer Oberflächengüte führt. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,2 mm minimiert Kerbwirkung und verbessert die Oberflächenrauheit, ideal für präzises Schlichten mit kleinen Zustellungen. Ist die Platte mit Standardhaltern kompatibel? Ja, als ISO-genormte Platte ist die DCMT11T302 NS9530 mit Haltern kompatibel, sofern Form, Freiwinkel, Toleranzklasse und Befestigung passen. Welche Rolle spielt das Loch mit Senkung? Das zylindrische Loch mit einseitiger Senkung ermöglicht sichere Klemmung und genaue Positionierung, was die Prozessstabilität erhöht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT 11T302 T6215 Wendeplatten - Tungaloy
Benefit from the T6215 CVD coating, a precise 0.2 mm corner radius and ISO compatibility to secure consistent, wear‑resistant performance in stainless‑steel turning. Order the insert directly via Metav Werkzeuge or ask consultants if needed. DCMT 11T302 T6215 turning insert by Tungaloy — ISO rhombic insert for stainless‑steel turning, CVD‑coated carbide DCMT 11T302 T6215 is an ISO‑standard indexable insert designed for external and internal turning of stainless steels, offering a wear‑resistant CVD‑coated grade and geometry for stable to lightly interrupted cuts CVD‑coated carbide for long tool life Optimised for stainless steel turning 0.2 mm corner radius for fine finishes ISO rhombic 11 format with centre hole Consistent wear resistance for uninterrupted production The T6215 grade combines a CVD coating with a robust carbide substrate to provide controlled wear and predictable tool life under typical turning loads. This translates into fewer tool changes and more stable process windows, especially when machining stainless steel under steady cutting conditions. The modest 0.2 mm corner radius supports fine surface quality while limiting edge chipping, so productivity and component quality are both maintained. Straightforward integration with ISO tool systems Designed as an ISO‑norm insert, the part fits existing turning systems when the holder matches by form, clearance and tolerance. The insert’s cylindrical centre hole with single‑side countersink (40°–60°) and a thickness of 3.97 mm permit secure clamping with standard underlays, clamping sets and screws, simplifying tool‑change logistics. The defined 7° clearance and 55° included angle ensure geometric compatibility with common external‑holder designs and predictable engagement in serial setups. Better chip control and surface finish with reduced rework A single‑sided chipbreaker combined with the small corner radius yields compact, controllable chips and consistent finishes, reducing downstream cleaning and inspection time. The geometry is balanced to perform under slightly interrupted cuts while preserving edge stability, so the insert supports both roughing passes in stable conditions and finishing passes that demand fine surface integrity. The result is fewer rejects, less manual finishing and a smoother production flow. Select the Tungaloy DCMT 11T302 T6215 insert for reliable, productive stainless‑steel turning and contact Metav Werkzeuge for specification support or to request a quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951220 SKU: 6951220-Tungaloy Manufacturer SKU: TUN6951220 Model series: ISO‑Drehwendeschneidplatten Core specifications Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Plate thickness: 3.97 mm Plate size: 11 Features & applications Material: carbide Coating / grade: T6215 (CVD) Chipbreaker: single‑sided Hole style: cylindrical hole + single‑side countersink (40°–60°) Shape: rhombic (DCMT11T302) Typical application: turning; suitable for stainless steel under stable to slightly interrupted conditions FAQ Which materials is the insert intended for? The Tungaloy DCMT 11T302 T6215 insert is formulated for stainless‑steel machining, offering wear resistance suited to stable and lightly interrupted turning operations. How is compatibility with a holder determined? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DCMT11T302 geometry and 55° included angle are standard references for selecting a compatible external holder. What chip control can be expected? The single‑sided chipbreaker combined with the 0.2 mm corner radius produces compact chips and supports consistent surface quality, minimising rework on turned components. How is the insert secured in the tool? The insert uses a cylindrical centre hole with a single‑side countersink (40°–60°) for clamping; paired with the correct underlay and clamping screw it provides secure mounting for turning operations. What is the coating and why is it relevant? The T6215 grade is a CVD‑coated carbide, selected for enhanced wear resistance when machining stainless steels, improving edge life and process stability Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 T6215 Wendeplatten - Tungaloy
Combine CVD-coated carbide durability with a 0.2 mm corner radius and ISO geometry to achieve precise finishes and dependable performance in stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT11T302 T6215 — ISO turning insert, CVD-coated carbide by Tungaloy A DCMT11T302 T6215 indexable insert designed for external and internal turning of stainless steels under stable to lightly interrupted conditions. DCMT 11T302 T6215 CVD-coated carbide Designed for turning stainless steels Rhombic shape with 55° cutting angle 0.2 mm corner radius, 7° relief angle Durable coating and material for reliable stainless-steel machining The CVD-coated T6215 grade combines a wear-resistant surface layer with a tough carbide substrate to reduce flank and crater wear during continuous cuts. This coating helps to resist adhesive wear and the typical tendency for stainless steels to form built-up edge, which results in more consistent surface quality and extended in-service life of the cutting edge. In practical terms, shops can expect fewer tool changes and a more predictable tool-life cycle when machining demanding austenitic or ferritic stainless alloys. ISO geometry and small corner radius for secure clamping and fine finishes The insert follows the ISO DCMT11T302 form, with a rhombic shape and a 55° cutting orientation that suits a wide range of turning tasks. The 0.2 mm corner radius supports fine finishing and light profiling, while the 7° relief angle reduces rubbing behind the edge on tight radii. With a plate thickness of 3.97 mm and a central hole featuring a cylindrical bore plus a single-sided countersink (40°–60°), the insert allows secure clamping and repeatable seating in properly matched holders. Compatibility with a given toolholder depends on form, relief, tolerance class, fastening method, size and thickness — selecting the correct combination ensures repeatable results and low vibration levels. Practical benefits for shop-floor productivity and selection guidance This grade and geometry are aimed at productive turning workflows: the combination of T6215 coating and the insert’s rigidity supports stable to slightly interrupted cuts, common in both external and internal turning operations. The insert’s one-sided chipbreaker should be chosen to match the workpiece material and the machine setup; the correct chipbreaker and cutting parameters reduce cycle time and improve chip control. As part of an ISO-indexable system — insert, suitable external holder or boring bar, shim and replacement clamp screws — this solution delivers quick indexability, consistent edge angles after indexing and straightforward inventory management for production environments. For application advice on Tungaloy DCMT11T302 T6215 inserts or to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876418 Manufacturer SKU: TUN6876418 SKU: 6876418-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: DCMT11T302 Plate size: 11 Plate thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 55° Special features Material: carbide Coating/grade: T6215 (CVD-coated carbide) Plate form: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning; external and internal turning Typical system: ISO insert with matching holder, shim and clamp screws FAQ What advantages does the T6215 coating offer for stainless-steel turning? The Tungaloy DCMT11T302 T6215 insert uses a CVD-coated grade that enhances wear resistance and reduces built-up edge when machining stainless steels, resulting in improved surface finish and longer edge life. Is this insert compatible with standard ISO DCMT holders? Compatibility depends on holder form, relief, tolerance class, fastening method, size and thickness; the DCMT11T302 geometry and central hole are made for secure clamping in holders designed for that ISO specification. Which operations are most suitable for this insert? The insert is intended for external and internal turning, particularly under stable to lightly interrupted cutting conditions where the T6215 grade yields reliable performance. How does the 0.2 mm corner radius influence the result? A 0.2 mm corner radius supports finer surface finishes and light profiling; it favours finishing passes or where a small nose radius is required to control cutting forces and surface integrity. What clamping and mounting features should be noted? The insert has a central cylindrical hole with a one-sided countersink (40°–60°) to permit secure, repeatable clamping together with the correct shim and clamp screw in an ISO-compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, a T6215 CVD-coated carbide grade and a 0.2 mm corner radius to maintain consistent edge life and surface quality in turning operations; order genuine Tungaloy inserts via Metav Werkzeuge or consult the team for application-specific guidance. DCMT 11T302 T6215 – Turning insert by Tungaloy (ISO indexable insert, CVD-coated carbide, 0.2 mm radius) A DCMT11T302 T6215 indexable turning insert engineered for external and internal turning, optimised for stable to lightly interrupted cuts in rostfreier Stahl. ISO indexable geometry for reproducible mounting CVD-coated carbide grade T6215 for wear resistance 0.2 mm corner radius for precise edge form Cylindrical hole with 40°–60° countersink Maximised productivity through predictable wear and lower unit costs The CVD-coated carbide of grade T6215 combines a hard, wear-resistant coating with a tough substrate to extend tool life under continuous and lightly interrupted turning. Chemical vapour deposition (CVD) produces a uniform hard layer that reduces flank wear and improves edge retention; this results in fewer index changes and more consistent component quality. For machining rostfreier Stahl the coating and substrate are selected to control built-up edge and maintain cutting performance, so production runs benefit from reduced downtime and steadier dimensional results. Secure clamping and efficient tool changes for shorter setup times The insert is manufactured to ISO geometry, ensuring compatibility with a wide range of standard holders when matched by form, relief angle, tolerance class, fastening, size and thickness. The rhombic profile and 3.97 mm thickness provide rigidity during cutting, while the cylindrical hole with one-sided countersink (40°–60°) gives positive location and reliable clamping. Together, these features allow quick indexable changes and predictable repeatability in multi-shift production, reducing non-productive time and simplifying tool management. Consistent surface finishes and adaptable chip control for rostfreier Stahl With a 0.2 mm corner radius and a single-sided chipbreaker, the geometry is tuned for finishing and light to moderate finishing passes in rostfreier Stahl. The modest radius balances edge strength and small-radius finishing to produce stable cutting forces and good surface quality. The one-sided chipbreaker assists in fragmenting swarf and maintaining controlled chip flow; selecting the correct chipbreaker and grade helps to match workpiece stability and cutting strategy, improving both process reliability and final component appearance. For application advice or to secure original Tungaloy inserts (grade T6215) for reliable turning performance, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and procurement. Technical Data Article number: 6951226 Manufacturer SKU: TUN6951226 Manufacturer article number: 6951226 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Core data Radius: 0.2 mm Relief angle: 7° Insert size: 11 mm Thickness: 3.97 mm Included angle: 55° Special features Rhombic insert shape Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker CVD-coated carbide, grade T6215 Suitable for rostfreier Stahl machining ISO-standard indexable plate Compatible with external holders and boring bars; system includes holder, shim and fastening screws FAQ What materials is this insert designed for? The DCMT11T302 T6215 insert is formulated for machining rostfreier Stahl under stable to lightly interrupted conditions; the T6215 coating and substrate combination improves wear resistance and reduces built-up edge. How does the ISO geometry affect holder compatibility? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; ISO geometry ensures the insert fits standard indexable holders when those parameters are matched. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation and evacuation during turning, supporting consistent surface finish and safer chip handling in rostfreier Stahl. Can the insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning applications when mounted in the appropriate holder or boring bar that matches the insert’s geometry and clamping requirements. What does the insert hole and countersink achieve? The cylindrical hole with a one-sided countersink (40°–60°) provides positive location and secure clamping, improving repeatability and reducing the risk of movement under cutting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T9215 Wendeplatten - Tungaloy
Combining an ISO-compliant rhombic geometry with a CVD-coated carbide grade (T9215) and a 0.2 mm corner radius delivers reliable, productive turning of medium steels; order the inserts directly via Metav Werkzeuge or consult their specialists for application advice. DCMT 11T302 T9215 Turning Insert for Turning — Tungaloy The DCMT11T302 T9215 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a balanced combination of wear resistance and fracture safety for medium steel machining. CVD-coated carbide grade T9215 ISO-compliant rhombic geometry 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent geometry and simple holder compatibility for reliable results The insert is designed to meet ISO tolerances and to mate cleanly with standard turning holders; its ISO-compliant form and specified 55° included angle ensure predictable cutting geometry and repeatable part quality. Compatibility is governed by form, 7° clearance angle, tolerance class, clamping method, size and thickness, which simplifies tool selection in production environments. This standardisation reduces setup time and minimises process variation on both external and internal turning operations. High wear resistance and productivity for medium steel applications Equipped with a CVD-coated carbide substrate and the T9215 grade, the insert combines enhanced wear resistance with good fracture toughness to support productive machining cycles. The coating and substrate pairing is optimised for continuous to light interrupted cuts, allowing for higher material removal rates without premature edge failure. As a result, tooling costs per component are reduced through longer service life and fewer interruptions for insert changes, supporting steady, economical production. Practical mounting features and surface-quality advantages The rhombic shape with a 0.2 mm corner radius and a plate thickness of 3.97 mm contributes to a stable cutting edge and improved surface finish on turned parts. The insert is supplied with hole (cylindrical hole plus one-sided countersink 40°–60°) to suit common clamping systems and to guarantee secure seating during interrupted cuts. A single-side chipbreaker assists chip control for many steel grades, while the standardised dimensions enable easy integration into ISO turning systems for efficient tool management in workshop environments. The DCMT11T302 format supports both finish and light-medium roughing tasks when paired with an appropriate chipbreaker and cutting data. Contact Metav Werkzeuge for tailored application support and to order Tungaloy inserts — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772450 Manufacturer SKU: TUN6772450 SKU: 6772450-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Included angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size: 11 Countersink angle: 40°–60° Special features CVD-coated carbide Grade T9215 Rhombic insert Single-side chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Application: external and internal turning Compatibility determined by form, clearance, tolerance class, clamping, size and thickness FAQ Which materials is this insert best suited for? The DCMT11T302 Tungaloy insert (SKU 6772450-Tungaloy) is intended primarily for medium steel machining; the T9215 grade balances wear resistance and toughness for productive turning. Can the insert handle interrupted cuts? Yes, the T9215 grade and CVD-coated carbide construction provide sufficient fracture safety for continuous to light interrupted cuts typical in turning operations. What are the key dimensional features to check for holder compatibility? Check the 55° included angle, 7° clearance angle, plate thickness 3.97 mm, size 11 and the rhombic form; these determine correct seating and clamping in ISO turning holders for the DCMT11T302 insert. What chip control does the insert offer? The insert incorporates a single-side chipbreaker suitable for many steel grades; selecting the correct chipbreaker and cutting data is recommended for optimal chip flow. Is the insert supplied ready for standard clamping systems? Yes, the insert is supplied with hole (cylindrical hole plus one-sided countersink 40°–60°) to match common clamping screws and seats used in ISO turning systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T9215 Wendeplatten - Tungaloy
Reliable CVD-coated T9215 wear resistance, an exact 0.2 mm corner radius and ISO compatibility combine to deliver productive medium-steel turning with low risk of breakage; order the DCMT 11T302 T9215 insert directly via Metav Werkzeuge or consult our specialists if application advice is required. DCMT 11T302 T9215 — ISO turning insert for turning by Tungaloy A DCMT 11T302 T9215 insert engineered for medium-steel turning, offering robust wear resistance and consistent chip control for continuous to slightly interrupted cuts CVD-coated carbide, grade T9215 Rhombic ISO insert, size 11 (DCMT) 0.2 mm corner radius, 7° clearance Cylindrical hole with one-sided countersink Increased throughput through consistent chip control The CVD-coated carbide grade T9215 combines high wear resistance with fracture toughness to sustain longer tool life under productive conditions. The single-sided chipbreaker geometry is optimised for medium-steel machining and supports stable chip formation during continuous to slightly interrupted turning. By choosing this insert, milling and turning centres gain a balance of tool life and process reliability that helps maintain cycle times and reduces unscheduled tool changes. The coating and substrate pairing minimise flank wear and preserve cutting edge integrity across typical shop-floor feeds and speeds. Predictable surface quality from precise geometry A rhombic insert form with a 55° approach angle and a 0.2 mm corner radius delivers predictable cutting behaviour and a controllable surface finish. The 7° clearance angle reduces rubbing and heat build-up at the flank, while the small radius enables fine profiling and finishing passes without excessive tool engagement. These geometric choices make the insert suitable for both light finishing and tougher semi-finishing tasks, where consistent dimensional accuracy and repeatable surface texture are essential for downstream assembly or grinding operations. Seamless integration into ISO tool systems Designed as an ISO-standard turning insert, the component fits a wide range of external holders and boring bars when form, clearance, tolerance class, fastening and thickness are matched. The insert features a cylindrical hole with a one-sided countersink (40°–60°) to secure location and clamping force, while the 3.97 mm thickness contributes to stable clamping and distribution of cutting forces. This compatibility ensures straightforward retrofitting into existing tool setups and keeps changeover times short, supporting efficient workshop routines and predictable tool inventory management. Durable substrate for reliable production The carbide substrate, combined with the CVD surface layer, provides resistance to abrasive wear while maintaining a robust cutting edge against chipping. This durability supports continuous production runs on medium-strength steels and helps minimise tool-related stoppages. The insert’s balanced design — including its single-sided chip control and proven coating technology — makes it a pragmatic choice for shops seeking consistent process windows, reproducible part quality and lower per-part tooling costs over extended production batches. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to request the DCMT 11T302 T9215 for your production setup; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951224 Manufacturer SKU: TUN6951224 SKU: 6951224-Tungaloy Model series: ISO turning inserts Material: carbide Grade/coating: T9215 (CVD-coated) Dimensions & core data Size: 11 Shape: rhombic Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Angle: 55° Features & applications With cylindrical hole and one-sided countersink (40°–60°) Single-sided chipbreaker For turning (external and internal) Suitable for medium steel machining ISO compatibility with standard holders FAQ Which materials is this insert suited for? The DCMT 11T302 T9215 insert is specified for medium steel machining; the T9215 CVD-coated carbide grade balances wear resistance and toughness for this material group. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius provides a compromise between edge strength and fine surface finish, enabling light profiling and finishing passes with controlled tool engagement when using the DCMT 11T302 T9215. What clamping interface does the insert use? The insert has a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure seating and repeatable clamping in compatible ISO toolholders. Is the insert suitable for interrupted cuts? Yes, the T9215 grade and the insert’s robust geometry are intended for continuous to slightly interrupted cuts, offering good resistance to chipping under mild interruptions. Can this insert be used in existing ISO holders? The insert is designed to ISO dimensions and will fit holders that match form, clearance, tolerance class, fastening, size and thickness; always verify holder compatibility before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, a 0.2 mm corner radius and a rhombic ISO form for steady productivity in medium steel turning; the design yields reliable wear resistance and controlled chip formation. Order the inserts through Metav Werkzeuge or contact the consultants for holder compatibility and application advice. DCMT11T302 11T302 T9215 Tungaloy indexable insert — CVD-coated carbide, rhombic form for turning DCMT11T302 T9215 is an ISO-format indexable insert optimised for external and internal turning in medium steels, offering a robust mix of wear resistance and fracture toughness CVD-coated carbide grade T9215 for mid-steel Rhombic ISO insert DCMT 11T302 form 0.2 mm corner radius with 7° clearance angle Cylindrical hole with single-side countersink Consistent productivity with a coating engineered for medium steels The combination of CVD-coated carbide and the T9215 grade provides a balanced tool life and reliable cutting performance for medium steel applications. The CVD coating enhances wear resistance under continuous to slightly interrupted cuts, while the substrate offers fracture toughness: together they allow higher material removal rates with predictable tool change intervals. This engineering translates directly into fewer disruptions on serial production runs and better utilisation of machine time. The result is a controlled, repeatable machining process that supports stable cycle times. Controlled chip formation and secure mounting for stable turning A single-sided chipbreaker and the rhombic geometry deliver effective chip control and surface finish for typical turning operations. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures safe clamping in compatible holders and prevents rotational slip under load. The combination of a 0.2 mm corner radius and a 7° clearance angle balances edge strength and surface quality: the small radius supports fine finishing while maintaining the robustness needed for moderate depths of cut. These features reduce the risk of unexpected breakouts and make setup and repeatability straightforward. ISO compatibility and easy system integration reduce setup time As an ISO-standardised insert, form, clearance, tolerance class, fastening type, size and thickness determine compatibility with the holder system. The insert’s size 11 and thickness 3.97 mm match common ISO holder interfaces, enabling rapid replacement and minimal inventory complexity. The rhombic form with a 55° included angle provides versatile cutting geometry for both external and internal turning; matching the insert to an appropriate holder or boring bar completes the system. This alignment with ISO tooling standards simplifies tool selection and shortens preparation times on the shopfloor. Practical selection guidance for predictable tool life Grade T9215 is intended as a first choice for medium steel machining, combining wear resistance with breakage security for productive turning. Select the single-side chipbreaker and the grade according to the workpiece material, type of cut and required surface finish; the insert excels in continuous to slightly interrupted operations. The sturdy construction and CVD coating support a wide process window, allowing stable feeds and speeds while reducing the need for frequent adjustments. For optimal results, pair the insert with a matching ISO holder and verify clamping torque and seat cleanliness before cutting. Contact Metav Werkzeuge for tailored advice on holder compatibility and to secure the Tungaloy DCMT11T302 T9215 inserts for production use — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering. Technical data Article number: 6951216 Manufacturer SKU: TUN6951216 SKU: 6951216-Tungaloy Model series: ISO indexable turning inserts Material: Carbide Specifications Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade: T9215 (CVD-coated carbide) Chipbreaker: single-sided Shape: rhombic Typical application: external and internal turning Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The DCMT11T302 T9215 indexable insert is designed primarily for medium steels, with the T9215 grade offering good wear resistance and fracture toughness for such applications. How does the CVD coating affect performance? The CVD-coated carbide in this insert improves wear resistance at elevated cutting loads and temperatures, extending tool life during continuous turning operations. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the insert’s size 11 and 3.97 mm thickness match standard ISO holders intended for DCMT-format inserts. What is the function of the single-sided chipbreaker? The single-sided chipbreaker provides controlled chip formation and evacuation for common turning tasks, improving surface finish and reducing the chance of entangling chips. What is the manufacturer article number and SKU for ordering? Manufacturer article number: 6951216; SKU: 6951216-Tungaloy Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide T9225 grade for robust cutting and an ISO‑compliant rhombic geometry with a 0.2 mm nose radius for reliable edge strength; order directly via Metav Werkzeuge or consult our technical advisers for application matching and availability DCMT11T302 11T302 T9225 DCMT turning insert (Tungaloy) A DCMT11T302 insert for ISO‑standard turning, optimised for medium-to-heavy steel machining with a robust CVD‑coated carbide grade CVD‑coated carbide grade T9225 Rhombic 11 size, 7° clearance 0.2 mm nose radius for edge strength Cylindrical hole with countersink, single‑side chipbreaker Proven robustness for medium-to-heavy steel turning The CVD‑coated grade T9225 combines wear resistance and controlled toughness to cope with varying engagement conditions encountered in industrial turning. As an ISO‑format rhombic insert, it provides a consistent cutting edge that supports stable metal removal in medium‑to‑heavy steel work. The carbide substrate resists flank wear, which translates into predictable life cycles and fewer unscheduled tool changes, improving process reliability on production lines. Precise fit and secure mounting for consistent performance Designed to the ISO plate form, fit depends on the insert’s form, clearance angle and tolerance class. The insert’s 7° clearance and 3.97 mm thickness ensure correct seating in standard external holders and boring bars, while the central hole with one‑sided countersink (40°–60°) secures repeatable clamping. These dimensions reduce run‑out and enable the stable clamping required for repeatable surface finish and dimensional control in serial turning applications. Productivity through chip control and universal application The single‑side chipbreaker and the universal nature of the grade deliver effective chip formation across a broad range of steels and interrupted cuts. With a 0.2 mm nose radius, the insert balances edge strength and surface quality, so operators can maintain cycle times without compromising finish. The combination of geometry and stable chip control lowers the risk of pocketing and increases uptime, offering measurable gains in throughput for workshops and production environments. For application advice, grade selection or batch availability of this Tungaloy DCMT11T302 T9225 insert, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Manufacturer article number: 6951225 Manufacturer SKU: TUN6951225 Our SKU: 6951225-Tungaloy Facts Size: 11 Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 7° Included angle: 55° Special features Material: carbide (cemented carbide) Coating/grade: CVD, T9225 Shape: rhombic Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) FAQ Which materials is this insert suitable for? The Tungaloy DCMT11T302 T9225 insert is engineered as a robust, universal grade for steel machining, especially in medium‑to‑heavy turning operations and where intermittent cuts demand extra toughness. How does the chipbreaker affect machining? The single‑sided chipbreaker on this insert promotes manageable chip formation under variable cutting conditions; the combination of chip control and the T9225 grade reduces the likelihood of entangling chips and supports safer, more consistent machining. Is the insert compatible with ISO toolholders? Yes. The insert follows ISO plate geometry; compatibility depends on the holder’s form, mounting style, clearance and tolerance class, and the insert’s 7° clearance and central hole design ensure secure clamping in standard holders. What advantages does the 0.2 mm nose radius provide? A 0.2 mm nose radius offers improved edge strength for interrupted or heavy cuts while still allowing acceptable surface quality, making it a pragmatic choice for customers balancing finish and durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade that delivers robust performance in medium to heavy steel machining and an ISO‑standardised form that ensures secure compatibility with common holders; order directly via Metav Werkzeuge or contact the consultants for tailored application advice. DCMT 11T302 T9225 Tungaloy indexable insert for turning The DCMT11T302 T9225 is an ISO‑standard rhombic turning insert designed for medium to heavy steel turning operations, offering a robust universal grade and a small nose radius for improved finish. CVD‑coated carbide T9225 grade Universal for medium to heavy steel machining ISO rhombic form 55° for reliable holding 0.2 mm nose radius for fine surface finish Increased machining reliability through a robust CVD grade The combination of CVD‑coated surface and carbide substrate in the T9225 grade is engineered for consistent chip control and extended tool life under varying engagement conditions. This robust universal grade provides greater resistance to flank wear and maintains edge integrity during intermittent cuts, which translates into fewer tool changes and steadier cycle times on the shop floor. The coating reduces built‑up edge formation and helps to preserve dimensional accuracy over longer runs, promoting predictable productivity in serial and job‑shop environments. Secure clamping and ISO compatibility reduce setup risk With an ISO rhombic 55° geometry and the specified hole configuration (cylindrical hole plus one‑side countersink at 40°–60°), the insert matches industry‑standard holders and clamping systems. The standardised shape and tolerance classes simplify tooling selection and give confidence in repeatable seating and torque behaviour. The 3.97 mm plate thickness and precise tolerances minimise flex during heavy cuts, supporting stable cutting forces and consistent surface quality. These design choices reduce setup complexity and the potential for assembly errors, enhancing process security. Fine finishing and versatile application for steel components A 0.2 mm nose radius offers a balance between strength and surface result, enabling improved part finish without compromising edge robustness. The single‑side chipbreaker design assists in forming controlled chips for a wide range of turning operations, particularly external and internal turning where chip evacuation and flexible cutting conditions are frequent. As a universal insert for medium to heavy steel machining, it is suitable where changing engagement, interrupted cuts or variable stabilities occur, providing both the toughness required for heavier passes and the edge control needed for finishing steps. For application guidance, availability and stocking information on Tungaloy CVD‑coated turning inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781092 Manufacturer SKU: TUN6781092 SKU: 6781092-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DCMT11T302 Core specifications Insert size: 11 Plate thickness: 3.97 mm Nose radius: 0.2 mm Clearance (relief) angle: 7° Geometry angle: 55° Hole: with hole; cylindrical hole + one‑side countersink (40°–60°) Features and application Material: carbide Coating: CVD‑coated Plate form: rhombic Chipbreaker: single‑side Typical application: turning (external and internal) Usage note: choose chipbreaker and grade to suit workpiece material and stability FAQ What materials is this insert intended for? The insert is supplied in the T9225 CVD‑coated carbide grade and is primarily intended for medium to heavy steel machining, offering good toughness for varying engagement conditions. How does the insert's geometry affect holder compatibility? The ISO‑standard rhombic 55° form and the specified hole plus countersink ensure compatibility with ISO turning holders that accept DCMT‑style inserts, providing consistent clamping and repeatable seating. Is the 0.2 mm nose radius suitable for finishing passes? Yes, the 0.2 mm radius balances edge strength with the ability to produce a fine surface finish, making it appropriate for a finishing pass after roughing operations. What benefits does the CVD coating provide? The CVD‑coating enhances wear resistance and reduces adhesion at the cutting edge, which helps maintain dimensional accuracy and prolong tool life under medium to heavy cutting conditions. Can this insert handle interrupted cuts? The T9225 grade is designed to offer additional toughness for lightly interrupted cuts and changing engagement angles, improving reliability in variable cutting scenarios. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T302 T9225 Wendeplatten - Tungaloy
Take advantage of the robust combination of CVD-coated carbide and precise 55° geometry for reliable medium-to-heavy steel turning; the insert’s universal grade ensures consistent chip control and longer tool life. Order this insert directly via Metav Werkzeuge or consult our technical team for application support. DCMT 11T302 T9225 — ISO rhombic turning insert for medium-to-heavy steel (Tungaloy) DCMT11T302 T9225 is an ISO-format rhombic indexable insert intended for external and internal turning; the insert integrates a 55° cutting geometry, a 0.2 mm corner radius and a CVD-coated carbide grade optimised for interrupted and variable cutting conditions. ISO rhombic insert with 55° cutting angle CVD-coated carbide grade T9225 0.2 mm corner radius for precise finishing Single-sided chipbreaker; cylindrical hole Consistent performance where conditions vary The combination of a CVD-coated carbide substrate and the T9225 grade delivers a balance of toughness and wear resistance that suits medium-to-heavy steel machining under variable engagement. The coating enhances thermal stability and reduces flank wear, which translates into longer edge life and fewer insert changes. Selecting this insert supports a stable process and improves machining uptime through predictable tool behaviour, especially when cuts are slightly interrupted or when rigidity fluctuates. Secure clamping and straightforward holder compatibility Designed to ISO dimensions, the rhombic insert fits standard indexable turning holders whose compatibility is determined by insert form, relief angle and tolerance. The insert’s cylindrical hole with one-sided countersink (40°–60°) and a nominal thickness of 3.97 mm provide reliable seating and repeatable clamping. This secure fixation reduces micro-movements at the cutting edge, improving dimensional repeatability and surface finish with each indexed position. Practical benefits for shop-floor decisions With a 0.2 mm corner radius and single-sided chipbreaker, the insert offers a compromise between finishing quality and robustness. The small radius supports fine surface finishing without sacrificing strength, while the chipbreaker assists in breaking and evacuating chips efficiently in standard turning tasks. For production environments where tool changes affect cycle time, this insert lowers the frequency of replacements and helps maintain consistent part quality. Material suitability and application advice The insert is specified for turning applications and is particularly suitable for a wide range of steels thanks to its robust universal grade that tolerates changing cutting conditions. Typical uses include external and internal turning operations where a reliable chip control and a stable cutting edge are required. For best results, pair the insert with a matching ISO rhombic holder and choose cutting parameters that reflect the workpiece material and machine rigidity. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DCMT11T302 T9225 insert or request cutting-parameter guidance from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781047 Manufacturer SKU: TUN6781047 SKU: 6781047-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.2 mm Relief (clearance) angle: 7° Thickness: 3.97 mm Size: 11 Included angle: 55° Special features Grade/sorte: T9225 Schneidstofftyp: CVD-coated carbide Plate form: rhombic Hole: with cylindrical hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Intended application: turning Geometry designation: 11T302 Manufacturer: Tungaloy FAQ What materials is this insert best suited for? The DCMT11T302 T9225 insert is optimised for medium-to-heavy steel machining; the T9225 grade and CVD coating provide the toughness and wear resistance required for such applications. How does the 0.2 mm corner radius affect part finish? A 0.2 mm corner radius offers a fine balance between surface quality and edge strength, enabling improved finishes while maintaining resistance to chipping during turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO rhombic dimensions (11T302) so compatibility depends on holder form, relief angle and tolerance class; secure seating is aided by the cylindrical hole with countersink. What does the T9225 designation mean for performance? T9225 indicates a robust universal grade with CVD coating designed for stable chip formation and reliable performance across varying engagement conditions in steel machining. Can this insert handle interrupted cuts? The grade’s toughness and the insert geometry are intended to tolerate slightly interrupted cuts; however, final suitability depends on machine rigidity and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T302 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade that withstands interrupted cuts, the ISO 55° rhombic geometry for versatile turning, and a fine 0.2 mm corner radius for improved surface finish — all designed to keep cycle times low and tool changes predictable. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DCMT11T302 T9225 Tungaloy indexable insert — rhombic ISO insert with CVD-coated carbide and 0.2 mm corner radius DCMT11T302 T9225 Tungaloy indexable insert provides a robust, universal grade insert engineered for medium to heavy steel turning and interrupted cuts, compatible with standard ISO holders and clamping systems ISO rhombic geometry 55° for versatile turning CVD-coated carbide grade T9225 0.2 mm corner radius for fine finishes Cylindrical hole with single-side countersink High-performance carbide grade for consistent metal removal The insert uses a CVD-coated carbide substrate in grade T9225, optimised for medium to heavy steel machining where variable engagement or light interruptions demand extra toughness. This robust universal grade reduces flank wear under fluctuating cutting conditions, which translates into longer tool life and fewer index changes. The coating improves thermal stability and wear resistance, so effective material removal rates can be maintained without sacrificing component quality, lowering overall machining costs through reduced downtime and predictable performance. ISO conformity and secure clamping reduce setup time Designed to the ISO indexable insert series, the rhombic 55° geometry and standardised dimensions ensure straightforward replacement and compatibility across a wide range of external holders and boring bars. Because compatibility is defined by form, relief angle, tolerance class, fastening and thickness, the standard format simplifies inventory management and minimises setup errors. Secure clamping and the insert’s dimensional stability contribute to repeatable cutting conditions, which supports tighter process control and faster machine changeovers for production environments. Precision geometry for improved finish and chip control A 0.2 mm corner radius combined with a single-sided chipbreaker and a 7° relief angle delivers a balance between surface quality and edge strength. The modest radius allows fine surface finishes on shaft and bore profiles while still providing resistance to chipping when facing light interruptions. The chipbreaker design promotes predictable chip flow and reduces the risk of chip entanglement in turbulent cuts, improving process reliability. With a plate thickness of 3.97 mm, the insert offers sufficient support in the pocket for stable cutting across a variety of turning operations. For tailored machining data and to secure original Tungaloy DCMT11T302 T9225 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and swift supply. Technical data Article number: 6951217 Manufacturer SKU: TUN6951217 SKU: 6951217-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Core data Insert designation: DCMT11T302 Size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Shape angle: 55° Special features Coating/grade: T9225 (CVD-coated) Insert shape: Rhombic Hole: with hole Hole style: cylindrical hole + one-side countersink (40°–60°) Chipbreaker: single-sided Typical application: Turning Intended use: Medium to heavy steel machining; suitable for interrupted cuts FAQ What materials is this insert best suited for? The DCMT11T302 T9225 insert is specified for medium to heavy steel machining and handles light interruptions well thanks to its CVD-coated T9225 grade. How does the 0.2 mm corner radius affect the workpiece finish? A 0.2 mm corner radius provides a fine surface finish while maintaining edge strength; the geometry of the DCMT11T302 insert helps reduce vibration and burnishing on shafts and bores. Is this insert compatible with standard ISO holders? Yes — the insert conforms to the ISO turning insert series dimensions, so compatibility with standard external holders and boring bars is determined by form, relief angle, thickness and clamping type. What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker on this insert improves chip control for common turning tasks, promoting stable chip flow and reducing the likelihood of chip snarling during continuous and slightly interrupted cuts. Which coating does the insert use and what does it improve? The insert employs a CVD-coated carbide grade T9225, which enhances thermal resistance and wear life, enabling higher cutting speeds and extended tool life in demanding steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide, a sharp cutting edge and 55° rhombic geometry for reliable turning results; efficient chip control and repeatable tool life support smooth production flow. Order these indexable inserts directly via Metav Werkzeuge or consult our specialists for application advice. DCMT11T304 AH120 indexable turning insert by Tungaloy — PVD-coated carbide, 7° clearance The DCMT11T304 AH120 is an ISO‑standard rhombic turning insert intended for external and internal turning, delivering process security where a sharp cutting edge and consistent wear resistance are required. PVD-coated carbide grade AH120 Rhombic 55° insert geometry One-sided chipbreaker for stable chips Cylindrical hole with 40°–60° countersink Consistent process security and extended tool life The insert combines a PVD-coated surface with the AH120 carbide grade to provide high wear resistance and resistance to chipping during interrupted cuts. This composition supports process reliability, reducing the frequency of tool changes and helping maintain consistent part quality. The engineered coating lowers flank wear under typical turning conditions, so users can expect predictable performance and longer intervals between regrinds or replacements. Easy integration into ISO tool systems for fast changeovers Designed as an ISO-standard indexable insert, the rhombic 55° geometry and 7° clearance make the plate compatible with a wide range of external holders or boring bars when form, clearance angle, tolerance class, fastening method, size and thickness match. The cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and straightforward fitment into standard clamping sets and replacement screw assemblies. With a plate thickness of 3.97 mm, integration into existing tool systems is simple, supporting quick tool changes and reduced setup time. Optimised cutting performance and predictable chip control A one-sided chipbreaker tailored to the insert profile promotes stable chip formation and evacuation, particularly when machining with appropriate feed and depth of cut settings. The 0.4 mm corner radius supports a balance between edge strength and surface finish, allowing both finishing and light roughing passes depending on the chosen cutting data. For best results, select a chipbreaker and grade matching the workpiece material, machining strategy and machine-tool stability to exploit the insert’s sharp edge and abrasion resistance. Contact Metav Werkzeuge for expert guidance on integrating these Tungaloy AH120 indexable inserts into production and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6826102 Manufacturer SKU: TUN6826102 Metav SKU: 6826102-Tungaloy Designation: DCMT11T304 AH120 Application: Turning Core dimensions Insert size: 11 Thickness: 3.97 mm Geometry angle: 55° Clearance angle: 7° Corner radius: 0.4 mm Materials & features Material: carbide Coating: PVD (AH120) Chipbreaker: one-sided Hole: cylindrical with 40°–60° countersink Shape: rhombic ISO designation: 11T304 Compatible system: ISO indexable turning plate system FAQ What turning tasks suit this insert best? This indexable insert is designed for ISO‑standard external and internal turning where a sharp cutting edge and process reliability are required; the AH120 grade offers wear resistance and chipping protection for a range of turning operations. How does the AH120 coating improve performance? The PVD-coated AH120 on the DCMT11T304 helps reduce abrasive flank wear and enhances edge stability, which contributes to more consistent component quality and extended tool life. Which holder types are compatible with this insert? Compatibility depends on holder form, tolerance class, fastening and size; the DCMT11T304 fits ISO rhombic holders and boring bars designed for 55° geometry and a cylindrical hole with countersink, provided the thickness and clamping system match. What does the 0.4 mm corner radius influence? A 0.4 mm corner radius increases edge strength compared with smaller radii, improving finish on medium‑duty passes while still permitting acceptable surface quality for finishing applications. Is the insert suitable for interrupted cuts or unstable setups? The AH120 grade is described as wear‑ and chipping‑resistant, making the DCMT11T304 appropriate for conditions where a robust cutting edge is needed; however, matching the chipbreaker and cutting data to machine stability is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of process security, wear-resistant PVD coating and a compact geometry for stable turning operations; order directly through Metav Werkzeuge or consult the sales team for application advice. DCMT11T304 AH120 turning insert for turning applications — Tungaloy The DCMT11T304 AH120 is an ISO rhombic turning insert designed for external and internal turning, offering a wear-resistant PVD-coated carbide grade for consistent machining performance. ISO rhombic 55° form for versatile turning PVD-coated carbide AH120 for wear resistance 0.4 mm corner radius for accurate profiles Cylindrical hole with 40°–60° single countersink Reliable performance through compact, stable geometry The insert combines a 55° rhombic form with a robust body to deliver repeatable cutting behaviour in general turning tasks. As an indexable insert its geometry ensures predictable chip load and cutting forces, reducing vibration and enhancing process stability. The PVD-coated carbide substrate helps maintain a sharp edge under interrupted cuts, while the designed relief and thickness contribute to consistent tool life and fewer machine stops. Precision edge and relief for improved surface finish A 0.4 mm corner radius paired with a 7° relief angle provides a balance between strength and cutting precision, enabling accurate profile generation and improved surface quality. The 3.97 mm thickness increases rigidity at the cutting zone, which is particularly beneficial when aiming for dimensional accuracy on short overhangs. These geometry choices reduce flank contact and rubbing, translating into better finishes and fewer rework cycles. Coating and grade engineered for process security The AH120 grade is a wear- and breakage-resistant PVD-coated carbide developed for demanding turning operations where a sharp cutting edge and process reliability are required. The single-sided chipbreaker facilitates controlled chip formation for a wide range of steels and general materials, helping to avoid chip entanglement and supporting continuous production. Selecting this grade supports longer intervals between index changes and predictable tool performance. System compatibility and practical handling for workshop use The insert is manufactured to ISO standards and its compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a single countersink (40°–60°) simplifies secure clamping in numerous standard clamping systems. In practice, a complete working set comprises the insert, matching external holder or boring bar, a shim or clamp set and the correct fastening screws, enabling fast replacement and minimised downtime. The SKU TUN6818552 identifies the exact variant for procurement and stock control. For reliable, process-secure turning solutions contact Metav Werkzeuge for tailored recommendations and to order Tungaloy DCMT11T304 AH120 inserts directly; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6818552 Manufacturer SKU: TUN6818552 SKU: 6818552-Tungaloy Brand: Tungaloy Facts Size: 11 Thickness: 3.97 mm Included angle: 55° Relief angle: 7° Corner radius: 0.4 mm Countersink angle: 40°–60° Special features Material: carbide Coating: PVD Grade: AH120 Single-sided chipbreaker Rhombic plate form With hole: cylindrical hole + single countersink Application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The AH120 grade of the DCMT11T304 insert is designed for general turning applications and provides broad coverage across common steels and general workshop materials due to its wear-resistant PVD-coated carbide. How does the 0.4 mm corner radius affect finishing? A 0.4 mm corner radius on the DCMT11T304 helps to produce accurate profiles with improved surface quality while maintaining sufficient edge strength for most general turning tasks. Is the insert compatible with standard ISO holders? Yes, the ISO-compliant geometry of this insert ensures compatibility when the holder matches form, relief angle, tolerance class, fastening method, size and thickness; the cylindrical hole with single countersink supports secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, ISO interchangeability and a compact 55° geometry for consistent turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT 11T304 AH6225 — Tungaloy indexable insert for turning, PVD-coated carbide, 55° geometry DCMT11T304 AH6225 is an ISO-standardised rhombic indexable insert designed for precision external and internal turning in industrial machining environments Universal AH6225 grade for stainless steel PVD-coated carbide for improved wear resistance 55° rhombic geometry with 7° clearance 0.4 mm corner radius for versatile profiles Consistent compatibility and quick set-up for ISO turning systems The ISO indexable insert design ensures predictable fitment across standard turning holders: compatibility depends on insert shape, clearance angle, tolerance class, fixing method, size and thickness. The ISO format reduces setup time and inventory complexity, enabling fast replacement and repeatable positioning. With a 55° lead angle and a 3.97 mm thickness, the insert provides a stable connection to matched holders and boring bars. This standardisation translates into measurable productivity gains through reduced downtime and simplified tool management. Reliable cutting performance in variable stainless steel conditions The AH6225 designation denotes a PVD-coated carbide grade optimised for machining stainless steel under changing conditions. The specification aims to combine a relatively sharp cutting edge with edge stability to resist built-up edge and premature wear. The single-sided chipbreaker geometry promotes controlled chip formation, improving surface finish and reducing secondary operations. As a result, users benefit from longer in-process life, fewer interruptions for index changes and more consistent part quality when facing mixed batches or intermittent cutting parameters. Practical application guidance for economical turning operations Designed for both external and internal turning, the insert forms part of a system comprising an ISO insert, the appropriate external holder or boring bar, a support/locking set and replacement screws. The rhombic shape with a 0.4 mm corner radius suits profile versatility while the cylindrical hole with single-side countersink (40°–60°) secures repeatable clamping. The 7° clearance angle helps prevent rubbing on the workpiece, particularly when working with slender setups. Selecting the correct chipbreaker and grade according to material, operation and machine stability will deliver the intended balance of edge life and surface quality. For application-specific recommendations on the Tungaloy AH6225 grade and supply options, contact Metav Werkzeuge for availability and tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829635 SKU: 6829635-Tungaloy Manufacturer SKU: TUN6829635 Model series: ISO-Drehwendeschneidplatten Designation: DCMT11T304 AH6225 Facts Corner radius: 0.4 mm Lead/angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size: 11 Hole: with cylindrical hole + single-side countersink (40°–60°) Special features PVD-coated carbide Rhombic insert shape Single-sided chipbreaker ISO-standardised turning insert Suitable for stainless steel Compatible with external holders and boring bars FAQ Is this insert suitable for stainless steel machining? The DCMT11T304 AH6225 insert is specifically developed as a universal grade for stainless steel, offering a sharp yet stable cutting edge and PVD coating to improve wear resistance during turning. What is the corner radius and how does it affect profiles? The insert features a 0.4 mm corner radius, enabling versatile profile work while maintaining edge strength for general-purpose turning operations with the AH6225 grade. Which holder types are compatible with this ISO insert? Compatibility is determined by the insert's rhombic shape, size (11), thickness (3.97 mm), hole form and tolerance class; the insert fits standard ISO external holders and boring bars designed for DCMT inserts. Does the insert include a chipbreaker and what type is it? This version comes with a single-sided chipbreaker designed to control chip flow and improve surface finish in a variety of stainless steel turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6225 Wendeplatten - Tungaloy
DCMT11T304 AH6225 Wendeplatte für Drehen – Tungaloy Die DCMT11T304 AH6225 Wendeplatte ist eine ISO-genormte Hartmetallplatte mit PVD-Beschichtung für effizientes Außen- und Innendrehen rostfreier Stähle. PVD-beschichtetes Hartmetall für lange Standzeit Rhombische Form 11 mm für vielseitigen Einsatz Eckenradius 0,4 mm für präzise Schnittkanten Mit Loch und einseitiger Senkung für sichere Befestigung Einseitiger Spanbrecher, optimiert für wechselnde Bedingungen Langlebige Schneidkante dank PVD-Beschichtung Die DCMT11T304 AH6225 nutzt PVD-beschichtetes Hartmetall, das für verbesserte Verschleißfestigkeit und konstante Schnittqualität sorgt. Die Beschichtung bildet eine dünne, harte Haftschicht, die Wärme und Abrieb beim Drehen reduziert. Dadurch wird die Standzeit erhöht und Stillstandzeit in der Fertigung verringert. Dieser Vorteil ist besonders relevant bei mittleren Schnittbedingungen und wechselnden Werkstückaufgaben. Hohe Prozesssicherheit bei rostfreien Stählen Für die Bearbeitung von rostfreien Stählen ist eine stabile Schneidkante entscheidend. Die Sorte AH6225 ist so ausgelegt, dass sie eine scharfe, zugleich stabile Schneidkante bietet und die Spanbildung kontrolliert. Das Ergebnis sind reproduzierbare Schnitte und gleichbleibende Oberflächengüten, was die Effizienz im Produktionsprozess steigert und Nachbearbeitung reduziert. Kompatibilität im ISO-DrehSystem und Geometrie-Vorteile Die rhombische Plattenform mit Plattengröße 11 mm und einer Plattendicke von 3,97 mm macht die Platte kompatibel mit gängigen ISO-Außenhaltern. Der Eckenradius 0,4 mm ermöglicht feine Konturen und stabile Kantenausbildung; der Freiwinkel von 7° und der Einstellwinkel von 55° unterstützen sichere Spanführung. Die Ausführung mit zylindrischem Loch und einseitiger Senkung gewährleistet formstabile Befestigung und einfache Montage. Praktische Einsatzhinweise und Auswahlkriterien Bei der Auswahl sind Spanformer, Sorte und Plattengeometrie auf Werkstoff und Bearbeitungsart abzustimmen. Der einseitige Spanbrecher ist für wechselnde Schnittbedingungen optimiert und reduziert Aufbauschneiden beim Drehen von zähen Werkstoffen. Für Anwender empfiehlt sich die Abstimmung der Schnittdaten am Werkzeughalter und gegebenenfalls eine Testreihe zur Feinjustierung der Schnittparameter. Für zuverlässige, produktive Zerspanung rostfreier Stähle empfiehlt sich die DCMT11T304 AH6225 von Tungaloy — bei Fragen technische Daten per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 anfordern Produktmerkmale Artikelnummer: 6947694 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller-SKU: TUN6947694 Daten Eckenradius: 0,4 mm Plattendicke: 3,97 mm Plattengröße: 11 mm Winkel: 55° Freiwinkel: 7° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall (dünne Haftschicht) Sorte: AH6225 Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Befestigung: mit Loch Spanbrecher: einseitig Form: rhombisch Einsatz: Drehen Kompatibilität: ISO-genormt FAQ Für welche Werkstoffe ist die Wendeplatte besonders geeignet? Die DCMT11T304 AH6225 von Tungaloy ist speziell für die Bearbeitung von rostfreien Stählen ausgelegt; die Sorte AH6225 bietet eine scharfe und stabile Schneidkante für mittlere Bearbeitungsbedingungen. Welche Vorteile bringt die PVD-Beschichtung bei dieser Platte? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und reduziert Wärmeentwicklung, was zu längeren Standzeiten und stabileren Ergebnissen beim Drehen führt. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius 0,4 mm erzeugt präzise Schnittkanten und ermöglicht feine Konturen bei gleichzeitig guter Kantenschärfe, was die Oberflächenqualität verbessert. Ist die Platte mit allen ISO-Außenhaltern kompatibel? Die Platte ist ISO-genormt und kompatibel mit entsprechenden Haltern, die Form, Größe, Dicke und Befestigungsart unterstützen; die Montage erfolgt mit zylindrischem Loch und Senkung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT 11T304 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH6225 and a sharp, stable cutting edge optimised for stainless steel turning. The rhombic ISO insert with a 0.4 mm corner radius and 7° clearance delivers consistent finishes and dependable tool life. Order the DCMT 11T304 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T304 AH6225 Tungaloy insert — ISO rhombic turning insert for stainless steel, PVD-coated, 0.4 mm radius A DCMT 11T304 AH6225 rhombic ISO turning insert engineered for external and internal turning of stainless steels, combining a sharp cutting edge with stable wear behaviour for medium machining conditions ISO rhombic form for standard holders PVD-coated carbide AH6225 0.4 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Consistent results for stainless steel turning The PVD-coated AH6225 grade is formulated as a universal solution for stainless steel machining, balancing a sharp cutting edge with the toughness needed for variable conditions. This composition reduces flank wear and supports a steady surface quality during medium-duty turning, translating into fewer insert changes and more predictable cycle times. For shops processing mixed stainless components, the insert’s balanced microgeometry helps maintain dimensional accuracy while lowering the risk of built-up edge formation. Easy integration with ISO toolholder systems The rhombic ISO geometry and standard size simplify mechanical compatibility: form, clearance, tolerance class, fastening, size and thickness determine holder fit. The insert’s rhombic shape, 7° clearance and 0.4 mm radius allow straightforward seating in common external holders and boring bars, shortening setup times and reducing positioning errors. Clear guidance on tolerance and clamping interfaces means the turning package—insert, holder, shim and screw—can be specified with confidence for repeatable setups. Improved chip control and machining economy Equipped with a single-sided chipbreaker, the insert promotes reliable chip formation when matched to workpiece material and cutting conditions. Stable chip shape reduces interruptions and safeguards the cutting edge, which contributes to overall economical machining by lowering scrap and tool-change frequency. Selecting the correct chipbreaker and cutting data for the operation will maximise machining efficiency and improve throughput on medium-duty stainless turning tasks. Workshop handling, clamping and practical notes The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure clamping and precise seating; plate thickness 3.97 mm and size 11 mm offer a rigid contact area that supports moderate cutting forces. The ISO designation DCMT11T304 and the compact corner radius of 0.4 mm are suited to fine finishing and profile work where edge integrity is important. If further process parameter data or application-specific recommendations are required, Metav Werkzeuge provides technical consultation to determine optimal feeds, speeds and holder choices. Contact Metav Werkzeuge today for application advice on the Tungaloy DCMT 11T304 AH6225 insert and to request tailored recommendations from our specialists Technical Data Article number: 6796247 Manufacturer SKU: TUN6796247 Supplier SKU: 6796247-Tungaloy Material: carbide Model series: ISO turning inserts Dimensions & core data Size: 11 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance: 7° Cutting edge angle: 55° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Features & applications ISO designation: DCMT11T304 Grade/coating: AH6225 (PVD-coated carbide) Chipbreaker: single-sided Shape: rhombic Application: turning Suitable for: stainless steels FAQ What materials is this insert suited for? The AH6225 grade is formulated primarily for stainless steel machining; the DCMT 11T304 insert performs well in a range of austenitic and ferritic stainless materials when matched with appropriate cutting data. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic ISO geometry of the DCMT 11T304 matches standard rhombic external holders and boring bars designed for ISO turning inserts. How does the 0.4 mm corner radius affect machining results? A 0.4 mm radius provides a balance between edge strength and fine surface finish, making it suitable for finishing passes and profile work where good surface integrity is required without excessive cutting forces. What advantage does the PVD coating bring? The PVD-coated AH6225 grade enhances wear resistance and edge life under the elevated temperatures and adhesion tendencies typical of stainless steel turning, resulting in more consistent component quality. Can the chipbreaker be used for heavy roughing? The insert is supplied with a single-sided chipbreaker suitable for medium machining; for heavy roughing, selecting a chipbreaker and grade matched to higher stability and greater depths of cut is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the insert's combination of a PVD-coated carbide grade optimised for stainless steels and a precise 0.4 mm corner radius for reliable surface finish and tool life. The robust rhombic geometry with a 7° relief angle supports consistent performance in external and internal turning; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DCMT 11T304 AH6225 – Turning indexable insert (ISO), PVD-coated carbide, Tungaloy The DCMT11T304 AH6225 is an ISO-standard rhombic turning insert engineered for external and internal turning of stainless steels and similar materials, offering a balance of sharpness and edge stability for medium machining operations. PVD-coated carbide grade AH6225 Designed for stainless steels 7° clearance angle, 55° included angle 0.4 mm corner radius, rhombic form Precise ISO compatibility for reliable tool selection The insert is supplied as an ISO-series indexable insert, so compatibility with a chosen holder is determined by the insert’s form, relief angle, tolerance class, attachment method, size and thickness. Using ISO-standard geometry simplifies tool selection and reduces setup time in production environments. The rhombic plate shape and the central hole with a cylindrical bore plus a single-side countersink (40°–60°) ensure positive clamping and repeatable seating in most commercial external and internal turning toolholders, supporting process stability and predictable tool life. Material and coating engineered for stainless-steel turning Manufactured from PVD-coated carbide, grade AH6225, the insert is intended as a universal solution for stainless steels, combining a sharp yet stable cutting edge with improved wear resistance. The PVD coating enhances thermal and abrasive resistance, which helps to maintain edge integrity under varying cutting conditions and fluctuating feeds. The single-sided chipbreaker is tuned to produce controllable chip forms during medium cutting, aiding chip evacuation and protecting the machined surface finish while contributing to economical tool consumption and consistent cycle times. Geometry and system build that improve productivity The rhombic geometry with a 55° included angle and a 0.4 mm corner radius provides a versatile cutting edge for medium finishing and semi-finishing operations, while the 7° relief angle reduces rubbing and supports a defined cutting action. With a plate thickness of 3.97 mm and plate size 11, the insert balances rigidity and cutting accessibility in constrained setups. The central hole design (cylindrical with one-sided countersink) enables secure clamping with standard screws and pads; a matching holder, backing pad and spare screws complete the system and help to achieve repeatable seating and minimal vibration during turning. For tailored application recommendations or to order the DCMT11T304 AH6225 insert, contact Metav Werkzeuge for technical advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947700-Tungaloy Manufacturer SKU: TUN6947700 Material: Carbide Coating: PVD Application: Turning Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 55° Hole: cylindrical with single-side countersink 40°–60° Special features Grade AH6225 – universal for stainless steels Single-sided chipbreaker Rhombic plate form ISO-series indexable insert FAQ What machining operations is this insert suitable for? The DCMT11T304 AH6225 insert is designed for external and internal turning, providing suitable geometry and chip control for medium finishing and semi-finishing operations when machining stainless steels. How does the AH6225 grade affect performance? The AH6225 PVD-coated carbide grade offers a balance of sharpness and edge stability for stainless steels, improving wear resistance and helping to maintain consistent surface quality under variable cutting conditions. Which holder features are required for correct compatibility? Compatibility is determined by the insert’s form, relief angle, tolerance class, attachment method, size and thickness; the DCMT11T304 requires a holder and clamping set that match its rhombic shape, central hole style and 3.97 mm thickness. What chip control can be expected with this insert? The single-sided chipbreaker on the DCMT11T304 promotes controlled chip formation during medium cutting, aiding chip evacuation and reducing the risk of surface damage on the workpiece. Is the insert supplied with screws or clamping parts? The delivery typically covers the insert itself; a complete system comprises the matching external holder or boring bar, backing pad/clamp set and replacement screws, which should be selected to suit the DCMT11T304 geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, the compact 55° rhombic geometry and a 0.4 mm corner radius for stable cutting performance in variable turning operations; order genuine inserts directly via Metav Werkzeuge or contact the consultants for application advice. DCMT 11T304 AH6225 turning insert by Tungaloy — PVD-coated carbide, ISO series DCMT11T304 AH6225 is an ISO-format indexable turning insert designed for external and internal turning, offering a universal grade for variable machining conditions. PVD-coated carbide grade AH6225 Optimised for stainless steels 55° rhombic insert geometry 0.4 mm corner radius Consistent performance for medium turning of stainless steels The PVD-coated carbide composition AH6225 is engineered as a universal grade for machining stainless steels, providing a balance between a sharp cutting edge and robust edge stability. This combination reduces the risk of built-up edge and extends effective cutting periods during medium-duty operations. The indexable design from the ISO series ensures repeatable seating and predictable wear patterns, which supports process reliability and lowers unexpected downtime. The result is a more efficient machining cycle with consistent part quality. Geometry and tolerances that simplify set-up The 55° rhombic geometry with a 7° relief angle and a 0.4 mm corner radius gives a compact but rigid cutting profile that is suitable where a compromise between clearance and edge strength is required. The insert’s geometry reduces vibration in less rigid set-ups and improves surface finish on a wide range of rotating parts. Compatibility with ISO holders is determined by form, relief, tolerance class, fastening and thickness, which helps to standardise inventory and simplifies toolholder selection for workshops following ISO tooling conventions. System integration and longer tool life As part of an ISO-indexable system, the insert works with a matching external holder or boring bar, plus the relevant clamping set and replacement screws. The single-sided chipbreaker evens out chip formation under varying operational conditions and supports controlled chip flow, which contributes to prolonged insert life. Choosing a universal grade such as AH6225 helps when the production mix includes different stainless-steel alloys, reducing the need for frequent insert changes and improving overall process economy. Practical handling, inspection and replacement The insert features a central hole with a cylindrical bore and a single-sided countersink (40°–60°), enabling secure clamping and straightforward indexing. Regular inspection of the cutting edge for flank wear and chipping informs replacement intervals; this insert’s PVD coating helps resist abrasive wear, while the substrate maintains toughness. For workshops aiming to maintain steady throughput, the combination of coating, geometry and ISO conformity translates into predictable performance and easier planning of spare parts. Contact Metav Werkzeuge for tailored application recommendations and to obtain original Tungaloy DCMT11T304 AH6225 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for sample requests and technical consultation Technical Data Article number: 6796246 SKU (manufacturer): TUN6796246 SKU: 6796246-Tungaloy Label: DCMT11T304 AH6225 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Insert angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 Corner radius: 0.4 mm Special features Material: carbide Coating: PVD Grade: AH6225 (universal for stainless steels) Plate shape: rhombic Chipbreaker: single-sided Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Application: turning ISO designation: 11T304 FAQ What materials is this insert suited for? The DCMT11T304 AH6225 insert is designed as a universal grade for stainless steels, with the PVD-coated carbide substrate offering wear resistance and a reliable cutting edge for medium turning tasks. Is this insert compatible with standard ISO holders? Compatibility is determined by the insert’s form, relief, tolerance class, fastening, size and thickness; the DCMT11T304 conforms to ISO-series specifications and fits holders designed for the DCMT 11 format. How does the chipbreaker influence machining? The single-sided chipbreaker on the DCMT11T304 promotes controlled chip formation under varying cutting conditions, improving chip evacuation and contributing to longer insert life and more consistent surface finishes. What does the 0.4 mm corner radius mean for finishes and strength? A 0.4 mm corner radius gives a compromise between a fine surface finish and a robust cutting edge; the DCMT11T304’s geometry helps reduce edge chipping while maintaining acceptable surface quality in typical turning applications. Which components complete the tool system for this insert? The system comprises the ISO-indexable insert itself, a matching external holder or boring bar, an underlay/clamp set and replacement screws; correct assembly ensures stable clamping and repeatable tool performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6235 Wendeplatten - Tungaloy
Combining the toughness of the AH6235 PVD-coated carbide with the ISO-compliant DCMT11T304 geometry and a 0.4 mm corner radius provides reliable chip control and extended edge life; order this turning insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT DCMT11T304 AH6235 turning insert — Tungaloy (ISO rhombic, 0.4 mm radius) DCMT11T304 AH6235 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for rostfreier Stahl and interrupted cuts PVD-coated AH6235 carbide grade Optimised for rostfreier Stahl applications 0.4 mm corner radius for versatile turning ISO rhombic form with cylindrical hole and countersink Durable grade for demanding rostfreier Stahl operations The PVD-coated AH6235 grade is formulated for tougher applications and is particularly suited to rostfreier Stahl and interrupted cutting conditions. This indexable insert delivers improved resistance to edge breakup and consistent cutting performance where material adhesion and built-up edge are common challenges. By selecting this tougher grade, process stability is increased and unexpected tool failures are reduced, which supports more predictable machining cycles and better surface integrity on the workpiece. Geometry and holder compatibility for secure clamping The rhombic ISO form with a 55° cutting angle and 7° clearance ensures a balanced contact geometry for many standard turning holders. The insert features a 0.4 mm corner radius and a plate thickness of 3.97 mm, with a cylindrical hole plus single-side countersink (40°–60°) for positive seating. Compatibility with a holder depends on form, clearance angle, tolerance class, clamping method, size and thickness; matching the insert to a suitable external holder or boring bar preserves the cutting edge and reduces vibration in less rigid set-ups. Practical benefits for productivity and process security Selecting the correct chipbreaker and the AH6235 grade supports stable chip formation and decreases the risk of catastrophic edge failure in unstable cutting scenarios. The combination of PVD coating and tough carbide substrate helps maintain a productive cutting edge under variable cutting parameters, offering longer tool life and lower tool-change frequency. These performance attributes translate into higher machine uptime and improved economic efficiency for component batches that include rostfreier Stahl or interrupted features. System considerations and recommended workflow The system comprises the ISO insert together with a matched external holder or boring bar, a shim/clamp set and replacement screws where required. For best results, choose the chipbreaker variant according to workpiece material, machining strategy and machine rigidity; light finishing passes benefit from smaller corner radii, while roughing requires more robust edge preparation. Ensure holders are within ISO tolerance classes and use appropriate clamping torque to avoid slippage and ensure repeatable positioning of the insert. Contact Metav Werkzeuge today for tailored recommendations on Tungaloy turning inserts and to order the DCMT11T304 AH6235 directly from stock — our technical advisers are ready to assist with cutting data and holder selection Technical Data Article number: 6890181 Manufacturer SKU: TUN6890181 SKU: 6890181-Tungaloy Designation: DCMT11T304 AH6235 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Material: carbide Core data Plate size: 11 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Cutting angle: 55° Special features Rhombic plate form PVD-coated carbide grade AH6235 One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO-standard indexable insert Application: turning (external and internal) FAQ What materials is this insert best suited for? The DCMT11T304 AH6235 insert from Tungaloy is optimised for rostfreier Stahl and other challenging alloys where toughness and resistance to edge breakout are required. Can this insert be used for both external and internal turning? Yes, the ISO rhombic form and geometry make this indexable insert suitable for both external and internal turning operations when paired with an appropriate holder. What does the AH6235 grade offer compared with standard grades? AH6235 is a tougher PVD-coated carbide grade designed for increased resistance to chipping and improved performance in interrupted cuts, providing longer effective edge life in difficult rostfreier Stahl applications. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the DCMT11T304 designation requires a holder that accepts ISO rhombic inserts of size 11 with the corresponding thickness and hole style. Is a specific chipbreaker recommended for roughing or finishing? Choose the chipbreaker variant to match the machining task: more aggressive breakers for roughing and stable chip evacuation, finer geometries for finishing passes to improve surface quality and dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide durability and a precise 0.4 mm corner radius for high-quality finishes and reliable performance in interrupted cuts; order directly via Metav Werkzeuge or consult our advisors for application support. DCMT11T304 AH6235 Tungaloy ISO turning insert — PVD-coated carbide, 0.4 mm radius DCMT11T304 AH6235 is an ISO-form indexable insert designed for turning tasks, optimised for stainless steels and interrupted cutting where edge robustness and consistent chip control are required. PVD-coated carbide AH6235 for stainless steels 0.4 mm corner radius for fine finishing Rhombic ISO insert, 11 mm size, 55° geometry Countersunk hole mounting, thickness 3.97 mm Increased productivity through durable coating and material choice The combination of a PVD-coated surface and a carbide substrate provides a balance of wear resistance and fracture toughness that suits high-demand turning operations. The AH6235 grade is formulated for tougher machining tasks, notably when working with stainless steel or when frequent interruptions in the cut increase the risk of chipping. This results in longer edge life and fewer insert changes, which improves uptime and reduces tooling costs per component—a tangible productivity advantage for machining shops and production lines. Faster set-up and reliable holder compatibility for consistent results Compatibility with standard ISO toolholders is determined by insert form, clearance angle, tolerance class, fastening and thickness. The rhombic geometry and 55° lead angle make the insert suitable for both facing and light profiling, while the cylindrical hole with a single‑side countersink ensures secure clamping in most ISO assemblies. Selecting the correct chipbreaker and grade for the workpiece and stability of the setup reduces vibration and improves surface finish. For bespoke holder interfaces or to confirm fitment, Metav Werkzeuge can provide precise advice and specifications. Precise geometry explained for predictable surface finish A 0.4 mm corner radius offers a compromise between edge strength and surface quality: larger radii tend to increase stability and tool life but can raise cutting forces; smaller radii give finer detail but less robustness. The 7° clearance angle limits rubbing on the flank face, helping to maintain dimensional accuracy and thermal stability during continuous cuts. The one‑sided chipbreaker is designed to direct chips away from the cutting zone during turning, which minimises recutting and supports consistent part quality in both external and internal turning operations. Practical application advice and expected outcomes In practice, this insert performs well for turning tasks where occasional interruptions or minor workpiece inconsistencies are expected. The AH6235 grade is suited to achieving repeatable results on stainless steels, delivering good surface integrity with fewer edge failures. Choosing a compatible holder and optimising cutting parameters for chip control will typically reduce cycle times and tooling consumption. For production environments seeking repeatability and reduced process variation, the insert offers a reliable component in a productive tooling system. For tailored recommendations on using Tungaloy PVD inserts in specific turning operations or to secure immediate supply, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and fast delivery. Technical data Article number: 6890174 Manufacturer SKU: TUN6890174 Our SKU: 6890174-Tungaloy Series: ISO turning insert series Designation: DCMT11T304 Core specifications Corner radius: 0.4 mm Insert size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Lead/insert angle: 55° Features & applications PVD-coated carbide AH6235 Rhombic plate with one-sided chipbreaker Suitable for stainless steels and interrupted cuts Mounting: cylindrical hole + single-side countersink (40°–60°) Application: external and internal turning Compatibility: ISO holder form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCMT11T304 AH6235 insert is designed primarily for stainless steel machining; the AH6235 grade offers enhanced durability for interrupted cuts. How does the 0.4 mm corner radius affect machining? A 0.4 mm radius provides a good balance between edge strength and surface finish, helping to reduce chipping while still delivering fine finishing characteristics. Which holder type is required for secure mounting? The insert fits ISO-compatible holders that accept a rhombic 11 mm plate with a cylindrical hole and a single‑side countersink; check holder form, clearance and tolerance class for full compatibility. Is the coating suitable for high-temperature cutting conditions? The PVD coating on the AH6235 grade enhances wear resistance and thermal stability under typical turning conditions, especially where heat build-up is a concern. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated carbide grade and a compact rhombic form to improve process stability and reduce tool changes in demanding turning operations; order original Tungaloy inserts via Metav Werkzeuge or consult our specialists for application-specific cutting parameters. DCMT11T304 AH6235 – Indexable Turning Insert for Turning | Tungaloy DCMT11T304 AH6235 is an ISO rhombic indexable insert designed for external and internal turning, optimised for interrupted cuts and challenging rostfreier Stahl applications PVD-coated carbide for tougher edges Designed for rostfreier Stahl and interrupted cuts Rhombic 11 mm form with 55° cutting angle Central hole with countersink for secure clamping Stable cutting performance for interrupted and tough materials The PVD-coated carbide grade AH6235 provides a balance of toughness and wear resistance that targets the common challenges of turning, especially with rostfreier Stahl and interrupted cuts. By choosing a tougher grade, the risk of notch formation and premature chipping is reduced, which in turn extends in-process lifetime and lowers the frequency of tool changes. The rhombic 11 mm geometry with a 55° cutting angle and a 0.4 mm corner radius helps maintain cutting-edge stability while delivering predictable chip flow with the one-sided chipbreaker. Reduced downtime through predictable edge behaviour and secure clamping A central mounting hole with a cylindrical bore and single-sided countersink (40°–60°) ensures reliable clamping in standard ISO toolholders, which simplifies tool replacement during production. The insert’s 7° clearance angle and plate thickness of 3.97 mm contribute to consistent clearance and strength under varying forces, so set-up times are shortened and repeatability improves. These mechanical features combine to offer measurable efficiency gains in batch production and short-series machining. Practical integration and material-specific guidance The ISO designation makes this insert compatible with typical ISO turning holders when form, free angle, tolerance class, fastening method, size and thickness are matched; compatibility verification is recommended before first use. The PVD-coated surface improves resistance to built-up edge in tough alloys while the chosen grade supports machining where frequent interruptions or edge impact occur. Select cutting data geared to the workpiece and machine rigidity to exploit the insert’s advantages for surface finish and life. For tailored recommendations on machining parameters or to secure original Tungaloy DCMT11T304 AH6235 indexable inserts, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical Data Article number: 6890178 SKU: 6890178-Tungaloy Manufacturer SKU: TUN6890178 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 mm Special features Grade: AH6235 Schneidstofftyp: PVD-beschichtetes Hartmetall Plate form: rhombic Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning FAQ What materials is this insert best suited for? The DCMT11T304 AH6235 insert is optimised for rostfreier Stahl and other materials where toughness and resistance to edge chipping are required; the AH6235 grade with PVD coating improves performance in interrupted cuts. How does the insert secure to the holder? Clamping is achieved via the central cylindrical hole with a one-sided countersink (40°–60°), providing secure fixation in compatible ISO turning holders for the DCMT11T304 insert (SKU 6890178-Tungaloy). What benefits does the PVD coating provide? The PVD-coated carbide composition of this indexable insert increases wear resistance and helps prevent built-up edge, contributing to longer in-service life and more consistent surface quality during turning. Is the geometry suitable for finishing operations? With a 0.4 mm corner radius and a 55° cutting angle, the insert balances strength and cutting precision; it can be used for semi-finish and certain finishing tasks when combined with appropriate feeds and speeds. How should the insert be specified when ordering spare parts? Order using the ISO designation and grade—DCMT11T304 AH6235—and the manufacturer article number 6890178 or SKU 6890178-Tungaloy to ensure original Tungaloy inserts are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 AH725 Wendeplatten - Tungaloy
Combine the universal AH725 grade with precise geometry and a compact 0.4 mm nose radius to achieve consistent, repeatable turning results; order the insert via Metav Werkzeuge or consult our technical team for application-specific guidance. DCMT 11T304 AH725 indexable turning insert – PVD-coated carbide, 0.4 mm radius (Tungaloy) DCMT 11T304 AH725 is an ISO rhombic indexable turning insert developed for external and internal turning, optimised for stable chip formation and secure engagement in standard turning holders DCMT 11T304 ISO insert for standard turning holders AH725 PVD-coated carbide for steel and stainless steel 7° clearance, 0.4 mm radius, 55° rhombic geometry Secure chip control for steady process performance The PVD-coated AH725 carbide grade provides a balance of toughness and wear resistance, making it suited to mixed production where varying steels and stainless steel occur. The combination of a dedicated chipbreaker and the insert’s geometry delivers controlled chip flow, reducing the risk of built-up edge and unexpected tool wear. For users aiming to increase uptime, this leads to fewer interruptions and a more predictable tool life, supporting higher process reliability without complex parameter tuning. Geometry engineered for accuracy and surface quality A 55° rhombic form paired with a 0.4 mm nose radius and a 7° clearance angle produces reproducible cutting engagement and consistent surface results. The relatively small nose radius enables fine profile work and close tolerances on turned diameters, while the relief angle helps maintain clearance at the flank to avoid rubbing. These geometric choices translate into measurable benefits on finish and dimensional control, especially where repeatability across batches is required. Practical system compatibility and straightforward integration As an ISO-specified insert, the DCMT 11T304 fits a wide range of standard holders and boring bars; compatibility depends on form, clearance, tolerance class, fixation and thickness. The insert’s with-hole design and the supplied countersink specification (cylindrical hole with a single-side countersink at 40°–60°) allow secure clamping and straightforward rotation indexing. The 3.97 mm plate thickness offers mechanical stability in moderate-to-demanding turning tasks while preserving efficient chipbreaking behaviour. Tailored grade for varied turning tasks The AH725 grade is engineered as a universal, breakage-resistant option for steel and stainless steel applications. Its PVD-coated carbide construction supports versatile cutting parameters and is particularly useful with smaller tools or where process security is prioritised. For shops aiming to standardise on a single insert family across mixed batches, this grade reduces tool inventory complexity while maintaining performance across different steels. For reliable process security with Tungaloy AH725 inserts, contact Metav Werkzeuge for technical consultation and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864948 Manufacturer SKU: TUN6864948 Metav SKU: 6864948-Tungaloy ISO designation: DCMT11T304 Grade: AH725 Material: carbide Coating: PVD Application: Turning Core technical data Size: 11 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Geometry angle: 55° Design & special features Rhombic plate form With hole Hole style: cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker Compatible with ISO turning systems; holder fit depends on form, clearance and tolerance class FAQ What materials is this insert suitable for? The insert is delivered in AH725 grade and is suitable for machining steel and stainless steel in turning applications. Can the DCMT 11T304 be used for internal turning as well as external turning? Yes, the ISO rhombic shape and the specified dimensions of the DCMT 11T304 make it suitable for both external and internal turning operations when paired with the appropriate holder. How does the AH725 grade behave under mixed-material batches? AH725’s PVD-coated carbide balance offers good fracture resistance and wear performance across varying steels, supporting stable process security in mixed-production environments. What are the key dimensions to check for holder compatibility? Check the ISO designation (DCMT11T304), plate size (11), thickness (3.97 mm), hole style and the rhombic geometry to ensure correct clamping and fit with the chosen holder. Is the nose radius suitable for finishing operations? The 0.4 mm nose radius supports finer finishes and tighter tolerances, making it applicable for many finishing and semi-finishing turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com