DNMA 150608 T505 Wendeplatten - Tungaloy
DNMA 150608 T505 DNMA150608 T505 Tungaloy-Wendeplatte für Drehen von Tungaloy Die DNMA150608 T505 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen und bietet eine wirtschaftliche Lösung für die Bearbeitung von Gusseisen DNMA‑Platte rhombisch, Größe 15 mm CVD-beschichtetes Hartmetall für Gusseisenbearbeitung Mit zylindrischem Loch für stabile Befestigung Freiwinkel 0° und Spitzwinkel 55° für vielseitigen Einsatz Sorte T505 für wirtschaftliche Standzeit Wirtschaftliche Eigenschaften für produktive Fertigung Die DNMA150608 T505 Tungaloy-Wendeplatte kombiniert CVD-beschichtetes Hartmetall mit einer auf Gusseisen abgestimmten Sorte, wodurch sich die Wirtschaftlichkeit in der Fertigung erhöht. Die Beschichtung reduziert den Verschleiß an der Schneidkante und sorgt für konstante Standzeit, wodurch Rüst- und Stillstandszeiten gesenkt werden. Anwender profitieren von planbaren Spanzyklen und gleichbleibender Oberflächenqualität bei mittleren bis hohen Schnittgeschwindigkeiten. Anwendungsfeld und Werkstoffwahl verständlich erklärt ISO-genormte Wendeschneidplatten wie diese sind für das Drehen von Außen- und Innenteilen ausgelegt. Die Sorte T505 wurde speziell für Gusseisen entwickelt; dabei steht die robuste Spanabfuhr im Vordergrund. CVD steht für chemische Dampfabscheidung, ein Beschichtungsverfahren, das die Schneidkante schützt und die Wärmebeständigkeit erhöht. Für Einsteiger: Gusseisen verlangt oft steilere Spanformer und die Auswahl einer passenden Sorte verhindert Vibrationen und Bruch. Kompatibilität, Handhabung und Austausch im Alltag Die Kompatibilität zur Aufnahme wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt; deshalb ist auf die passende Haltergeometrie zu achten. Die rhombische Plattenform und das zylindrische Loch ermöglichen sichere Befestigung und einfachen Wechsel. Für rationelle Abläufe empfiehlt sich die Bevorratung von Ersatzschrauben und Unterlagen, damit Werkstattprozesse nicht durch fehlende Kleinteile unterbrochen werden. Empfehlung: Für wirtschaftliche Gusseisenbearbeitung die DNMA150608 T505 Wendeplatte von Tungaloy verwenden und bei Bedarf technische Beratung über Metav Werkzeuge anfordern – E‑Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6831257 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6831257 Wendeplattenbezeichnung: DNMA150608 Fakten Eckenradius: 0,8 mm Plattendicke: 6,35 mm Plattengröße: 15 mm Spitzwinkel: 55° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Dampfabscheidung) Sorte: T505 (für Gusseisenbearbeitung) Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Spanbrecher: ohne Anwendung: Drehen Wendeplattenbezeichnung ISO: DNMA150608 FAQ Welche Werkstoffe lassen sich mit der DNMA150608 T505 Wendeplatte bearbeiten? Die DNMA150608 T505 Tungaloy-Wendeplatte ist primär für Gusseisen ausgelegt; das CVD-beschichtete Hartmetall ermöglicht wirtschaftliche Bearbeitung bei typischen Gusseisen-Anwendungen. Welchen Eckenradius hat die Platte und wie wirkt sich das aus? Die Wendeplatte hat einen Eckenradius von 0,8 mm, was eine gute Balance zwischen Standzeit und Schnittstabilität schafft und feine Oberflächen bei moderaten Schnittkräften ermöglicht. Wie ist die Platte zu befestigen und welche Halter passen? Die Platte verfügt über ein zylindrisches Befestigungsloch; passende Außenhalter müssen Form, Freiwinkel 0°, Größe und Dicke der Platte berücksichtigen, um sichere Spannverhältnisse zu gewährleisten. Ist die Sorte T505 für intermittierende Schnitte geeignet? Die Sorte T505 bietet eine wirtschaftliche Lösung für Gusseisen und ist bei moderater Schnittunterbrechung einsetzbar; bei stark gestörtem Schnittbild sollte die Halterung und Spanformerwahl überprüft werden. Welche Daten helfen bei der Bestellvorbereitung für die DNMA150608 T505 Wendeplatte? Nutzen Sie Herstellerartikelnummer 6831257 und SKU TUN6831257 für eindeutige Bestellungen und geben Sie Modellserie ISO-Drehwendeschneidplatten sowie Plattenformat DNMA150608 an Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMA 150608 T5105 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T5105 wear resistance and the ISO DNMA geometry for stable, high-speed cast-iron turning — ideal where repeatable edge life and secure clamping are essential. Order the part or ask Metav Werkzeuge's consultants for application advice. DNMA 150608 T5105 turning insert — CVD-coated carbide, 55° rhombic (Tungaloy) DNMA150608 T5105 is an ISO-format rhombic turning insert designed for high-speed machining of cast iron under stable machining conditions. ISO rhombic insert, 55° cutting angle CVD-coated carbide T5105 for high wear resistance Suitable for high-speed cast-iron turning Cylindrical hole and 6.35 mm thickness for secure clamping High-speed performance with a wear-resistant grade The T5105 grade is a CVD-coated carbide engineered for sustained performance during high-speed operations on cast iron. Its coating increases resistance to abrasive wear and maintains cutting-edge integrity, which reduces the frequency of insert changes and supports predictable process windows. For production environments where cycle time and tool lifetime are key performance indicators, the combination of grade and geometry offers measurable stability and fewer stoppages for tool change. Geometry and clamping for consistent results The rhombic DNMA form with a 55° cutting angle and a cylindrical locating hole provides reliable seating in compatible toolholders. The insert’s 6.35 mm thickness and 0.8 mm corner radius give a balance between rigidity and finishing capability, suitable for both light finishing passes and moderate roughing when the setup is stable. The absence of a predefined chipbreaker means chip control must be matched to the operation and workpiece; selecting the correct holder and process parameters ensures consistent surface quality and repeatable dimensions. Process benefits and economic efficiency Using an ISO-format indexable insert streamlines tool logistics and simplifies replacement routines across compatible holders. The CVD coating and wear-focused substrate extend usable life under the recommended conditions, which translates into lower tooling consumption per part and improved overall equipment effectiveness. For batch production or long single-part runs on cast iron, this insert supports steady output and predictable consumable costs while maintaining machining accuracy. System compatibility and practical considerations The insert is part of an ISO insert system that requires a matching external holder or boring bar, a backing clamp or clamping kit, and compatible screws for secure fastening. Compatibility is determined by shape, clearance angle, tolerance class, fixation method, size and thickness; selecting a holder with the correct seat and screw arrangement ensures repeatable clamping and safe cutting conditions. For application planning, note the insert’s specifications so that the toolholder selection and process parameters are aligned with the machining task. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability, procurement and to obtain technical guidance for the Tungaloy DNMA150608 T5105 turning insert. Technical data Article number: 6850233 Manufacturer SKU: TUN6850233 Brand: Tungaloy Designation: DNMA150608 Facts Thickness: 6.35 mm Size: 15 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Special features Material: Carbide Coating: CVD Application: Turning, high-speed cast-iron machining Plate shape: Rhombic Hole: with cylindrical hole Chipbreaker: without FAQ What materials is this insert optimised for? The DNMA150608 T5105 insert from Tungaloy is optimised for cast iron machining at high cutting speeds under stable conditions. Which holder geometry is required for secure clamping? The insert requires a compatible ISO rhombic seat with the correct pocket for a DNMA profile and a clamping screw arrangement that matches the insert’s cylindrical hole and thickness. Does the insert include a chipbreaker? This grade and geometry are delivered without a chipbreaker, allowing process engineers to select chip control via holder geometry and cutting conditions. How does the T5105 grade affect tool life? The T5105 CVD-coated carbide provides enhanced abrasive wear resistance, which extends edge life in appropriate high-speed cast-iron applications and supports predictable replacement intervals. Can this insert be used for internal turning or only external? The DNMA form is primarily used for external turning; compatibility for internal boring depends on the selected holder and the machine’s access constraints. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMA 150608 T5115 Wendeplatten - Tungaloy
Benefit from the combination of an ISO-standard rhombic form, a CVD-coated carbide grade T5115 and clear compatibility data for predictable turning results; order the DNMA150608 directly via Metav Werkzeuge or consult the team for application advice. DNMA 150608 T5115 — Turning insert (ISO rhombic, CVD-coated) by Tungaloy DNMA150608 T5115 is an ISO-standard indexable turning insert designed for versatile external and internal turning applications, optimised for cast-iron machining. ISO-standard rhombic geometry CVD-coated carbide grade T5115 Optimised for cast-iron machining Cylindrical hole, 6.35 mm plate thickness Consistent tool life through CVD-coated carbide grade T5115 The CVD-coated carbide substrate in grade T5115 combines improved wear resistance with reliable cutting-edge stability, delivering longer tool life under typical cast-iron turning conditions. CVD (chemical vapour deposition) creates a hard, thin layer that reduces flank wear and resists built-up edge; this makes the insert particularly suitable where consistent surface quality and reduced tool change frequency are priorities. The result is predictable machining cycles and fewer unexpected interruptions to production. Predictable fit and safe clamping for stable productivity The insert’s ISO-standard geometry and defined parameters—form, clearance angle, tolerance class, fastening type, size and thickness—ensure compatibility with matching holders and boring bars. A neutral clearance angle of 0° and the specified seating dimensions mean the component locates precisely in approved toolholders, reducing set-up time and minimising runout. Clear specification of these factors aids planners and operators in selecting the correct holder, thereby supporting repeatable results on batch and single-piece production. Practical specifications that simplify operation and selection Key mechanical specifications such as corner radius 0.8 mm, included angle 55°, thickness 6.35 mm and insert size 15 mm define the cutting geometry and feed/edge engagement. The rhombic shape with a cylindrical hole (with hole) offers secure fastening and straightforward indexation; the insert is supplied without a chipbreaker, so chip control should be chosen according to operation, material and machine stability. These measurable details allow process engineers to calculate cutting data and match the insert to the right holder and machining strategy with confidence. Contact Metav Werkzeuge for tailored application guidance on the Tungaloy DNMA150608 T5115 insert or to arrange supply through Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical data Article number: 6850234 SKU: 6850234-Tungaloy Manufacturer SKU: TUN6850234 Brand: Tungaloy Type designation: DNMA150608 Model series: ISO turning inserts Facts Corner radius: 0.8 mm Insert size: 15 mm Thickness: 6.35 mm Included angle: 55° Clearance angle: 0° Hole style: cylindrical Special features Material: carbide Coating: CVD Grade: T5115 (universal for cast iron) Shape: rhombic Chipbreaker: none Typical application: external and internal turning FAQ What materials is this insert best suited for? The DNMA150608 T5115 insert, in grade T5115, is a universal choice optimised for cast iron; its coating and substrate balance wear resistance and edge stability for common cast-iron turning tasks. Is the DNMA150608 compatible with standard ISO holders? Yes, the insert follows ISO geometry conventions; compatibility with a holder depends on matching the form, clearance angle, tolerance class, fastening type, size and thickness specified for the DNMA150608. Does this insert include a chipbreaker? The DNMA150608 T5115 is supplied without a chipbreaker, allowing selection of appropriate chip control strategies or alternative grades and geometries depending on the application. How does the CVD coating benefit machining performance? The CVD coating on the T5115 grade forms a hard, wear-resistant layer that reduces flank wear and helps maintain cutting-edge integrity, extending productive tool life in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMA 150608 T515 Wendeplatten - Tungaloy
Combining economical machining, reliable chip control and ISO compatibility for consistent turning performance. The CVD-coated T515 carbide grade delivers economic advantages when machining cast iron, while the ISO-format design ensures straightforward replacement in standard holders. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. DNMA 150608 T515 Turning insert for turning applications — Tungaloy DNMA150608 T515 is an ISO-format indexable turning insert designed for economical external and internal turning of cast iron components, providing a dependable option where consistent chip formation and tool life are required. CVD-coated carbide grade T515 Optimised for cast iron machining Rhombic insert, 55° cutting geometry Cylindrical-hole design for secure mounting High-performance grade for efficient cast iron turning The DNMA150608 insert combines a CVD coating with a hardened carbide substrate, which together provide a balance of wear resistance and fracture toughness suited to interrupted cuts in cast iron. The T515 grade is optimised for economic machining, enabling longer tool life under stable cutting conditions and reducing changeover frequency. The geometry features a 0° rake angle and a 55° cutting edge, which support predictable chip behaviour and make this insert a practical choice for batch production where uptime and repeatability matter. Simple compatibility and secure clamping for fast tool changes ISO-standard dimensions mean the insert fits common holders when the form, clearance angle, tolerance class, fastening method, size and thickness match. The rhombic shape and cylindrical locating hole ensure a secure mount in compatible top-side clamps, while the 6.35 mm plate thickness adds rigidity during heavier cuts. Explaining the terms: an ISO-format insert refers to a standardised size and hole/seat arrangement, so replacement and inventory management are simplified across different toolholders and machines. Practical selection guidance for chip control and edge life With a 0.8 mm corner radius, the insert balances edge strength and surface finish—smaller radii improve detail and reduce cutting forces, while larger radii increase robustness. This grade is supplied without a dedicated chipbreaker, so chip formation depends on chosen cutting parameters and machining stability; selecting appropriate speeds and feeds or using a matching chip-control geometry in the holder can prevent issues. For applications with frequent interruptions or variable stability, the T515 CVD-coated carbide delivers a compromise between wear resistance and toughness. Production benefits that matter on the shop floor Adopting ISO-format indexable inserts such as this one streamlines inventory and shortens downtime during regrinds or replacements, directly affecting overall productivity. The CVD layer reduces flank and crater wear in continuous cast iron operations, while the carbide core sustains mechanical loads during heavier cuts. These attributes translate into measurable advantages: fewer insert changes, more consistent part quality and potentially lower cost per component over long production runs. For application advice on the Tungaloy T515 grade or to order DNMA 150608 inserts directly, contact Metav Werkzeuge for tailored recommendations and stock information Technical data Article number: 6735278 Manufacturer SKU: TUN6735278 Item SKU: 6735278-Tungaloy Item name: DNMA150608 T515 Tungaloy insert Model series: ISO indexable turning inserts Material: Carbide Grade/coating: T515 (CVD-coated) Facts Inscribed circle / size: 15 Plate thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Cutting edge angle: 55° Hole: with cylindrical hole Special features Rhombic insert geometry No integrated chipbreaker Designed for cast iron machining ISO-standard format for holder compatibility FAQ What materials is this insert intended for? The DNMA150608 T515 insert is intended primarily for the economical machining of cast iron; the T515 grade and CVD coating are chosen to balance wear resistance and toughness for this material class. Can the DNMA150608 be used in internal turning operations? Yes, the ISO-format DNMA150608 can be used for both external and internal turning provided the selected holder matches the insert form, size and clamping method. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius increases edge strength and improves surface finish compared with very small radii, offering a compromise between robustness and fine-detail finishing when using the DNMA150608 insert. Is a specific chipbreaker required with this insert? This insert is supplied without a built-in chipbreaker; chip control depends on cutting parameters and holder geometry, so choose a supporting holder or parameters appropriate for cast iron to achieve the desired chip form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMA 150612 T5105 Wendeplatten - Tungaloy
High-speed cast-iron turning is supported by the combination of a CVD-coated carbide grade T5105 and the ISO DNMA geometry, delivering consistent tool life and stable chip formation under steady conditions. Order the DNMA150612 T5105 indexable insert directly via Metav Werkzeuge or consult the team for application-specific advice. DNMA 150612 T5105 indexable turning insert — ISO DNMA rhombic, 55° cutting angle (Tungaloy) The DNMA150612 T5105 is an ISO rhombic indexable insert engineered for turning applications, especially high-speed, stable machining of cast iron components. CVD-coated carbide grade T5105 for wear resistance ISO DNMA 150612 rhombic insert, 55° cutting angle 1.2 mm corner radius for predictable profile control Cylindrical hole, 6.35 mm thickness for ISO holders Enhanced productivity through wear-resistant cutting grade The CVD-coated carbide T5105 delivers a balance of high wear resistance and cutting-edge durability for demanding turning operations. In practice, the coating reduces flank and crater wear during sustained high-speed work, which translates into longer tool life and fewer indexings. For production environments processing cast iron, the combination of the CVD coating and a robust carbide substrate reduces unplanned tool changes and supports a more economical cost per component. The emphasis on measurable longevity and consistent surface finishes prioritises process reliability and predictable planning for batch production. Geometry tuned for dimensional control and chip behaviour The ISO DNMA rhombic geometry with a 55° cutting angle provides favourable entry conditions for both external and internal turning cycles, improving access and minimising tool deflection in typical setups. A 1.2 mm corner radius gives stable edge strength for profile retention while limiting burr formation; this aids repeatable tolerances on turned diameters and shoulders. The insert’s cylindrical hole and 6.35 mm plate thickness ensure secure clamping and compatibility with standard ISO external holders and boring bars, enabling accurate seat positioning and reduced vibration. These geometric features support steady cutting forces and contribute directly to improved workpiece quality. System integration and process advantages for workshop efficiency The insert is designed as part of an ISO-compliant system: indexable insert, matching external holder or boring bar, and the required shim/clamp set with replacement screws. Absence of an integrated chipbreaker means chip control should be selected according to workpiece material, cutting parameters and stability of the setup; the T5105 grade excels when stable clamping and moderate depths of cut are used. For production lines seeking consistent throughput, this approach allows optimisation of cutting data and minimises variability. The result is smoother tool management, fewer interruptions and a more predictable manufacturing rhythm — especially valuable in series turning. Discuss the DNMA150612 T5105 application with Metav Werkzeuge for tailored recommendations and fast supply; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850244 Manufacturer SKU: TUN6850244 Manufacturer article number: 6850244 Material: carbide Coating/grade: T5105 (CVD-coated) Facts Insert size: 15 mm Plate thickness: 6.35 mm Cutting angle: 55° Corner radius: 1.2 mm Relief angle: 0° Hole: cylindrical Special features ISO turning insert, DNMA150612 Rhombic plate, 55° geometry No chipbreaker supplied For turning; suitable for cast iron in stable conditions Compatible with ISO external holders and boring bars Part of ISO indexable insert system; requires holder, shim/clamp set and replacement screws FAQ What materials is this insert designed for? The DNMA150612 T5105 indexable turning insert is optimised for machining cast iron and performs best under stable clamping and cutting conditions. Is the insert supplied with a chipbreaker? No; the DNMA150612 insert is delivered without a chipbreaker so that chip control can be matched to the workpiece, cutting data and machine setup. Which holders are compatible with this DNMA insert? Compatibility is determined by ISO DNMA form, relief angle, tolerance class, fixing method, size and thickness; the insert fits standard ISO DNMA holders and boring bars when dimensions match. How does the T5105 grade affect tool life? The CVD-coated T5105 grade enhances wear resistance and provides stable edge retention during high-speed turning, which generally extends tool life in production runs. Can this insert be used for internal turning as well as external turning? Yes; the rhombic DNMA geometry and 55° cutting angle allow use in external and certain internal turning operations where access and holder geometry permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMA 150612 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T5115 grade and the ISO DNMA geometry for reliable cast iron turning and consistent edge stability. The insert’s 55° rhombic form, 1.2 mm corner radius and 6.35 mm thickness deliver robust clamping and reduced vibration in stable setups. Order the DNMA 150612 T5115 insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMA 150612 T5115 ISO turning insert for external and internal turning, Tungaloy The DNMA 150612 T5115 is an ISO-indexable turning insert designed for precision external and internal turning, optimised for machining cast iron with a balanced combination of wear resistance and cutting-edge stability. CVD-coated carbide grade T5115 ISO DNMA 55° rhombic insert form Designed for cast iron machining Consistent performance on cast iron with CVD-coated carbide The CVD-coated carbide grade T5115 provides a balanced combination of wear resistance and edge stability that suits a wide range of cast iron applications. This universal grade reduces the need for multiple special-purpose grades, enabling longer tool life under typical finishing and medium-duty roughing conditions. The coating improves thermal and abrasive resistance, which helps to maintain a predictable surface finish and lowers the frequency of index changes. For manufacturers seeking reliable productivity on cast parts, the material and coating synergy supports steady cycle times and fewer unplanned interruptions. Secure seating and stable clamping for predictable tool life Built to ISO form standards, the rhombic DNMA geometry with a 55° approach angle and a 1.2 mm corner radius combines rigidity with accessible cutting-edge strength. Compatibility with toolholders depends on insert geometry, clearance angle (0°), tolerance class, attachment method and plate thickness; this insert features a cylindrical central hole for positive location. The 6.35 mm plate thickness and standardised size simplify holder selection and deliver improved resistance to bending and chatter in rigid setups. As a result, the cutting edge remains stable under load, supporting reproducible part quality and extending the service interval of the turning system. Practical applications and process recommendations for turning The insert is intended for both external and internal turning where cast iron is the primary workpiece material. As this grade is supplied without a chipbreaker, selection of cutting parameters should match machine stiffness and workpiece clamping conditions; a stable setup and tailored feed rates will enable the best performance. When encountering interrupted cuts or heavy radial depths, favour lower cutting forces and check toolholder rigidity. Coolant use and correct insert orientation further support thermal control and chip evacuation, helping to preserve edge condition and part surface integrity. Production benefits: inventory simplification and efficient changeover Using an ISO-standard insert such as this one reduces tooling variety on the shop floor and simplifies inventory management. The standardised form and the universal T5115 grade mean fewer SKUs to stock while still covering a broad range of cast iron tasks. Quick indexability and simple replacement procedures cut downtime during tool changes, contributing to smoother production flow and predictable throughput. For operations aiming to balance cost efficiency with process reliability, the combination of a proven carbide grade and ISO conformity delivers measurable operational advantages. Contact Metav Werkzeuge for original Tungaloy DNMA 150612 T5115 inserts, application guidance and rapid supply from stock Technical data Article number: 6850245 Manufacturer SKU: TUN6850245 SKU: 6850245-Tungaloy Model series: ISO turning inserts Facts Corner radius: 1.2 mm Approach angle: 55° Clearance angle: 0° Plate thickness: 6.35 mm Size: 15 mm Hole: cylindrical hole Special features Material: carbide Coating / grade: T5115 (CVD-coated) Application: turning (external and internal) Insert form: rhombic Supplied without chipbreaker FAQ What materials is this insert best suited for? The DNMA 150612 T5115 insert is optimised for machining cast iron; the CVD-coated T5115 grade balances wear resistance and edge stability for that material group. Does the insert fit standard DNMA toolholders? Yes. The insert follows ISO DNMA geometry and is compatible with holders that match the specified form, 55° angle, thickness (6.35 mm) and central cylindrical hole. Is there a chipbreaker included with this grade? This specific insert is supplied without a chipbreaker, so chip control depends on cutting parameters, workpiece material and the chosen holder or downstream chip management. How does the 1.2 mm corner radius affect operation? A 1.2 mm corner radius increases edge strength and gives a more robust cutting edge for improved resistance to edge chipping, making it suitable for stable finishing and medium cutting conditions. Can this insert be used for internal turning operations? Yes. The ISO DNMA form and rhombic geometry allow use in suitable internal turning holders provided the machine setup offers the required rigidity and access. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMA 150612 T5125 Wendeplatten - Tungaloy
Benefit from robust, CVD‑coated carbide and a precise 55° rhombic geometry for stable turning of cast iron in interrupted cuts; order the DNMA 150612 T5125 turning insert directly via Metav Werkzeuge or ask the consultants for matching holders and clamping sets. DNMA 150612 T5125 — Turning insert (rhombic, 55°) by Tungaloy A DNMA 150612 T5125 indexable turning insert designed for ISO‑format turning applications, optimised for interrupted cuts and less stable machining conditions. ISO‑compatible rhombic turning insert CVD‑coated carbide grade T5125 55° geometry with 1.2 mm corner radius Suitable for interrupted cuts in cast iron Stable cutting in interrupted turning for cast iron The insert delivers predictable edge life thanks to its CVD‑coated carbide composition and the tougher T5125 grade. This combination reduces the risk of premature chipping during interrupted cuts, which makes the tool particularly useful where stability is limited or vibration occurs. The design focuses on maintaining a reliable cutting edge rather than maximising speed, so process reliability is improved and rework is reduced. Geometry that eases setup and improves accuracy With a 55° rhombic geometry and a 1.2 mm corner radius, the insert provides a balance between strength and detail on external and internal profiles. The 0° clearance angle and a plate thickness of 6.35 mm support rigid mounting and predictable cutting engagement. These defined dimensions enable faster tool selection and repeatable setup when swapping inserts across compatible ISO holders. Clear guidance on system compatibility and clamping The insert follows ISO conventions, so compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness. The centre cylindrical hole allows secure fastening in many standard clamping systems. When selecting a holder, match the insert’s rhombic form and 15 mm size to the toolholder seat and check the tolerance class to ensure accurate repeatability during index changes. Practical advantages for production workflows The absence of an integrated chipbreaker indicates the insert is intended for applications where chip control is achieved by cutting conditions or a suitable holder design. Choosing this grade reduces the likelihood of edge failure in interrupted operations, which supports longer tool life in mixed‑batch production and lowers process interruptions. The insert is best combined with a suitable holder and clamping set to exploit the material coverage and mechanical resilience of the carbide grade. For tailored recommendations on holder compatibility and fast supply of Tungaloy turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and order support. Technical data Article number: 6850246 SKU: 6850246-Tungaloy Manufacturer SKU: TUN6850246 Model series: ISO‑Drehwendeschneidplatten Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 55° Free angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD‑coated Grade: T5125 Application: turning (external and internal) Insert form: rhombic (DNMA) No chipbreaker Suitable for interrupted cuts and less stable conditions ISO‑compatible insert; holder compatibility depends on form, clearance and clamping FAQ What materials is this insert suitable for? The DNMA 150612 T5125 insert is formulated as a tougher CVD‑coated carbide grade and is particularly recommended for cast iron under interrupted cutting conditions; other materials may be machined depending on cutting data and holder. How does the 55° geometry affect cutting performance? A 55° rhombic geometry provides a compromise between robustness and access to profile details; the geometry of the DNMA insert helps maintain edge strength while enabling precise external and internal turning. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker, so chip control should be achieved by the chosen cutting parameters, the holder geometry or through a matching chip control solution. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the DNMA 150612 format requires a rhombic seat for secure mounting and correct cutting angle. What is the advantage of the T5125 grade? The T5125 grade combines a tougher substrate with CVD coating to enhance resistance to chipping in interrupted cuts and under less rigid machining conditions, improving process stability and reducing downtime. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110402 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH120, a 55° rhombic geometry and secure cylindrical-hole clamping for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for technical matching. DNMG 110402 AH120 Turning Indexable Insert — 55° rhombic, PVD-coated (Tungaloy) The DNMG110402 AH120 is an ISO-format indexable insert engineered for general turning, offering a sharp cutting edge and high process security for demanding production environments. PVD-coated carbide AH120 55° rhombic geometry for versatile turning Double-sided chipbreaker for extended use Cylindrical hole for secure clamping Durable grade and coating that extend tool life The PVD-coated carbide composition combined with the AH120 grade provides a balance of wear resistance and edge toughness. This configuration reduces flank and crater wear during continuous turning operations, which contributes to longer tool life and fewer interruptions for tool change. In practice, the harder, fracture-resistant coating keeps the cutting edge sharp under varying cutting conditions, improving component consistency and reducing overall machining cost per part. Geometry tailored for stable and precise cutting A 55° rhombic geometry and a 0° relief angle give stable engagement and predictable chip flow for both external and internal turning. The insert measures 11 mm across the inscribed circle and has a 4.76 mm thickness, while the 0.2 mm nose radius supports fine finish work without compromising edge strength. The cylindrical hole and standardised ISO form ensure reliable clamping, which is essential for repeatable accuracy and vibration control in production setups. Chip control and process reliability for production environments The double-sided chipbreaker layout is optimised for controlled chip formation and evacuation, making the insert suitable when a sharp cutting edge and process security are required. Choosing the right chipbreaker and grade for the material and machining stability reduces the risk of built-up edge and improves surface finish. These advantages translate directly to fewer rejects and improved cycle-time predictability in serial manufacturing. Clear compatibility notes and practical system setup This ISO-format insert is part of a system comprising the insert, a compatible external holder or boring bar, a clamping plate or clamp set, and replacement screws. Compatibility is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters with the holder specification ensures correct seating and maximum performance. For retrofit or replacement, check holder compatibility and select the chipbreaker that matches the intended feed and depth of cut. Contact Metav Werkzeuge for specification advice on the Tungaloy DNMG110402 AH120 insert and to arrange prompt supply—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical guidance Technical data Article number: 6793701 Manufacturer SKU: TUN6793701 SKU: 6793701-Tungaloy Facts Size (inscribed circle): 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 55° Relief angle: 0° Special features PVD-coated carbide Grade AH120 Rhombic insert shape Cylindrical hole for clamping Double-sided chipbreaker Application: Turning ISO-indexable turning insert series FAQ What machining tasks is this insert designed for? The DNMG110402 AH120 insert is designed for general turning where a sharp cutting edge and high process security are required, suitable for both external and internal turning operations when matched with the correct holder and chipbreaker. Which geometric details are most relevant for setup? The insert features a 55° rhombic form, a 0.2 mm nose radius and a 0° relief angle; the cylindrical hole ensures reliable clamping in ISO-compatible holders. How does the AH120 grade affect performance? AH120 is a PVD-coated, wear- and fracture-resistant grade that maintains a sharp edge under varied cutting conditions, improving process stability and tool life for turning tasks. What components are needed for a complete system? A complete setup typically includes the ISO-format insert, a compatible external holder or boring bar, a clamping plate or clamp set and replacement screws; compatibility depends on insert form, relief angle, tolerance class, clamping and size. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide AH6225 grade with a rhombic DNMG geometry (55°) and a 0.2 mm corner radius, this indexable turning insert delivers a sharp yet stable cutting edge for stainless-steel turning; benefit from consistent tool life and predictable process behaviour — order directly via Metav Werkzeuge or consult their specialists for holder compatibility and optimal machining parameters. DNMG110402 AH6225 ISO turning insert — rhombic 55° for turning by Tungaloy A DNMG110402 AH6225 is an ISO rhombic indexable turning insert designed for external and internal turning, optimised for stainless steels with a stable cutting edge and universal mid-range performance PVD-coated carbide grade AH6225 for stainless steels Sharp, stable cutting edge for medium-duty turning Rhombic DNMG shape with 55° cutting angle Double-sided chipbreaker with cylindrical hole Consistent performance and extended tool life The combination of PVD-coated carbide and the AH6225 grade targets stable wear behaviour during turning of stainless steels. The coating provides wear resistance and reduces built-up edge under variable cutting conditions; the substrate carbide maintains edge integrity. As a result, machining runs show fewer tool changes and a more predictable interval between regrinds or replacements, contributing to lower process costs and higher uptime. The design supports steady surface quality during medium-duty operations while retaining a reasonably sharp geometry suitable for mixed batch production. Seamless integration into ISO tool systems for reliable set-up Built to ISO dimensions, the insert’s compatibility with holders is determined by form, relief angle, tolerance, clamping and thickness — all of which are matched by standard ISO external holders and boring bars. The rhombic DNMG geometry with a 55° cutting angle offers a good balance between axial and radial cutting forces, while the 4.76 mm thickness and 0° relief ensure a rigid connection in the pocket. A cylindrical hole provides secure clamping and repeatable positioning. These characteristics simplify fixture selection and reduce set-up iteration, improving process stability across batch runs. Controlled chips and practical handling in production environments The double-sided chipbreaker is configured for consistent chip formation and evacuation when machining stainless steels; this reduces the risk of entanglement and helps maintain surface finish. The insert is indexable, allowing rotation to a fresh cutting edge without tool replacement, which lowers tooling cost per component. With a 0.2 mm corner radius, the geometry balances edge strength and surface finish; small radii reduce cutting forces for lighter cuts while still delivering acceptable edge durability for medium cuts. The result is efficient chip control, fewer interruptions and reproducible workpiece quality. Contact Metav Werkzeuge for tailored holder recommendations and to source Tungaloy DNMG inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for advice on process parameters and compatibility Technical Data Article number: 6947107 SKU: 6947107-Tungaloy Manufacturer SKU: TUN6947107 Brand: Tungaloy ISO designation: DNMG110402 AH6225 Core data Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 55° Relief angle: 0° Hole: cylindrical hole Features PVD-coated carbide grade AH6225 Double-sided chipbreaker Rhombic insert shape (DNMG) ISO indexable turning insert Suitable for stainless steels Application: turning FAQ What materials is the insert suited for? The DNMG110402 AH6225 indexable turning insert from Tungaloy is optimised for stainless steels; the AH6225 grade provides a wear-resistant PVD-coated carbide suited to variable cutting conditions in turning operations (SKU TUN6947107). Is the insert double-sided and indexable? Yes, the insert features a double-sided chipbreaker and is indexable, allowing rotation to a fresh cutting edge to extend service life and reduce tooling costs per component. Which holder characteristics determine compatibility with this insert? Compatibility is governed by insert form, relief angle, tolerance class, clamping method, size and thickness — for this design, the rhombic form, 0° relief and 4.76 mm thickness are key parameters when selecting an ISO holder or boring bar. How does the chipbreaker affect machining performance? The double-sided chipbreaker controls chip shape and evacuation, reducing risk of chip-related interruptions and supporting consistent surface finish during stainless-steel turning. What corner radius does the insert have and what finish can be expected? With a 0.2 mm corner radius, the geometry offers a compromise between edge strength and finer surface finish for medium-duty cuts, enabling smoother part surfaces while maintaining acceptable tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH6225 Wendeplatten - Tungaloy
Combines a precise cutting geometry and a robust PVD-coated carbide grade for reliable machining of rostfreier Stahl; the rhombic ISO form and double-sided chipbreaker support consistent chip control and repeatable surface finish. Order the DNMG110402 AH6225 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110402 AH6225 – Turning insert, rhombic ISO, PVD-coated carbide (Tungaloy) DNMG 110402 AH6225 is an ISO rhombic indexable insert designed for external and internal turning, offering a sharp, stable cutting edge suited to rostfreier Stahl machining. ISO rhombic insert DNMG form PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining Double-sided insert with chipbreaker Consistent machining performance for rostfreier Stahl The combination of a PVD-coated surface and the AH6225 carbide formulation results in a balance between wear resistance and edge sharpness that reliably handles medium cutting operations and varying conditions. For shops processing rostfreier Stahl, this means fewer interruptions for tool changes and a steadier component quality. The coating supports thermal stability at the cutting edge, while the base carbide maintains toughness, together reducing flank wear and the risk of edge chipping under intermittent cuts. Secure clamping and ISO compatibility for straightforward setups Built to the ISO specification and supplied in the rhombic DNMG form, the insert matches common external holders and boring bars when the form, clearance, tolerance class, fastening, size and thickness correspond. The 0° clearance specification and the cylindrical hole design ensure a reliable mechanical seat for positive clamping systems. With a plate thickness of 4.76 mm and nominal size 11, the geometry supports stable engagement and predictable chip flow in conventional turning fixtures. Improved edge life and controlled chip formation The insert’s double-sided chipbreaker geometry and robust carbide substrate contribute to steady chip control and prolonged edge life. A well-formed chipbreaker reduces heat concentration and chip entanglement, which in turn lowers the likelihood of built-up edge and improves surface integrity. These advantages translate into longer intervals between indexings, fewer reworks and a measurable increase in process efficiency for batch and single-piece production alike. Practical guidance for application and process optimisation Use the insert for both external and internal turning operations; select the chipbreaker and grade to match workpiece stability and cutting conditions. The system approach includes the ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws — ensuring correct fit and repeatability. For finishing passes, consider reduced feed and speed settings to exploit the sharp cutting edge, while slightly higher feeds during roughing can take advantage of the insert’s toughness without sacrificing tool life. For tailored machining advice on Tungaloy AH6225 inserts and to discuss suitable holders or process parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultants are available to support production needs Technical data Article number: 6947163 Manufacturer SKU: TUN6947163 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts ISO designation: DNMG110402 Size: 11 Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Geometry angle: 55° Special features Grade/coating: AH6225, PVD-coated Plate shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: Turning FAQ Which materials are suitable for this insert? The DNMG 110402 AH6225 insert is optimised for rostfreier Stahl and provides reliable performance across typical stainless steel turning tasks due to its PVD-coated carbide grade. Is the insert reversible and how many cutting edges are available? This rhombic DNMG insert is double-sided, offering multiple usable cutting edges; indexing extends service life and reduces tooling costs for repeated turning operations. What holders are compatible with the DNMG 110402 geometry? Compatibility depends on matching the ISO form, size, thickness and fastening; use ISO DNMG holders or boring bars that accept the DNMG110402 specification to ensure secure clamping. How does the AH6225 coating benefit machining? The AH6225 PVD coating enhances thermal and wear resistance while preserving a sharp edge, which is particularly beneficial when turning rostfreier Stahl under variable cutting conditions. Can the insert be used for finishing and roughing? Yes — with adjusted cutting parameters. The combination of a sharp, stable edge and robust substrate allows controlled finishing passes and productive roughing when the workpiece setup is sufficiently rigid. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an AH6225 PVD-coated cemented carbide grade, ISO compatibility and a compact 0.2 mm corner radius for consistent stainless-steel turning performance; order the DNMG110402 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed DNMG110402 AH6225 Tungaloy indexable insert — Turning, PVD-coated carbide, 0° clearance The DNMG110402 AH6225 Tungaloy indexable insert is an ISO-standard turning insert engineered for reliable external and internal turning of stainless steels, offering a sharp yet stable cutting edge for medium machining conditions ISO rhombic insert, 11 mm size PVD-coated carbide AH6225 grade 0° clearance with 55° diamond geometry 0.2 mm corner radius for fine surface finish Double-sided chipbreaker with cylindrical hole Consistent cutting performance with a universal grade The combination of the AH6225 grade and PVD-coated cemented carbide delivers a balance between edge sharpness and wear resistance that suits mixed and intermittent turning tasks. Designed to meet ISO dimensions, this insert provides a repeatable cutting geometry that helps maintain process stability over extended runs. The insert’s composition reduces flank wear at the typical cutting speeds for stainless steels, so fewer index changes are required and component tolerances remain steady. Simple integration into standard turning toolchains Compatibility with toolholders is governed by form, clearance angle, tolerance class, clamping method, size and thickness; the rhombic geometry and standard hole pattern ensure the insert fits common ISO holders. The double-sided chipbreaker design extends usable life by allowing the insert to be indexed twice, improving cost efficiency per edge. For workshop planning, note the plate thickness of 4.76 mm and the standard 11 mm inscribed circle when matching holders and clamping kits for immediate assembly. Predictable surface quality and process benefits The small 0.2 mm corner radius and the 0° clearance create a favourable balance between edge strength and surface finish: small radii help achieve finer finishes on turned parts without compromising edge stability under medium depths of cut. The 55° diamond geometry concentrates cutting forces for controlled chip formation, while the chipbreaker promotes short, manageable chips in many stainless-steel turning scenarios. The result is reduced rework and a steadier production rhythm. For application advice on the DNMG110402 AH6225 Tungaloy insert and to confirm suitability for specific stainless-steel grades, contact Metav Werkzeuge for prompt support and ordering information Technical data Article number: 6947078 SKU: 6947078-Tungaloy Manufacturer SKU: TUN6947078 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Size (inscribed circle): 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Diamond angle: 55° Plate form: rhombic Special features Grade AH6225, PVD-coated cemented carbide Double-sided chipbreaker Cylindrical hole With hole Suitable for external and internal turning of stainless steels Compatibility depends on holder form, free angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The DNMG110402 AH6225 Tungaloy insert is intended primarily for stainless steels; the AH6225 grade provides a universal performance profile for such materials. How does the 0.2 mm corner radius affect the surface finish? A 0.2 mm corner radius helps achieve finer surface quality while maintaining sufficient edge strength for medium turning operations with the DNMG110402 AH6225 insert. Can the insert be used in standard ISO holders? Yes — the insert follows ISO dimensions and will fit compatible ISO rhombic holders, subject to matching thickness, hole pattern and clamping specifications. How many cutting edges are available per insert? The double-sided design provides two usable edges before replacement or regrinding is necessary for this Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade and ISO conformity to deliver consistent turning results for stainless steels, while the rhombic DNMG form with a 0.2 mm corner radius ensures stable cutting and repeatable clamping; order directly via Metav Werkzeuge or contact our advisors for application guidance. DNMG110402 AH6225 Tungaloy turning insert (for turning applications) DNMG110402 AH6225 rhombic ISO turning insert optimised for external and internal turning of stainless steels with a sharp, stable cutting edge. PVD-coated carbide AH6225 Optimised for stainless steels ISO rhombic DNMG 110402 profile Double-sided chipbreaker with cylindrical hole Consistent cutting performance for turning operations The PVD-coated carbide grade AH6225 is designed to combine a sharp cutting edge with robustness under changing conditions, making it suitable for medium machining tasks on stainless steels. The thin, wear-resistant coating reduces flank wear and helps maintain a stable edge geometry, which translates into predictable tool life and consistent part quality. For workshops seeking reliable surface finish and reduced scrap, this technical combination delivers measurable process stability without overcomplicating tool choice. Engineered geometry for repeatable clamping and compatibility The insert follows the ISO DNMG form, so compatibility with holders is determined by form, relief angle (0°), tolerance class, fastening, size and thickness. The rhombic shape (11 mm inscribed circle) and thickness 4.76 mm provide a secure seating in standard holders, while the corner radius 0.2 mm supports fine profiling and small step control. The cylindrical hole and specified lead angle (55°) ensure consistent orientation and clamping force, reducing vibration and improving repeatability across batches. Practical shop-floor advantages and economical use A double-sided chipbreaker design extends usable life by allowing both sides to be employed, lowering tooling cost per part and reducing changeover frequency. The insert’s combination of geometry and the AH6225 coating supports a broad range of turning tasks—external and internal—so fewer tool variants are required in the tool crib. If further specification is needed for a particular chart of materials or to match a holder, expert advice is available: email info@metav-werkzeuge.com or call +49 2822 7131930 for targeted recommendations and compatibility checks. For tailored application advice on Tungaloy AH6225 turning inserts and to arrange supply via Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966127 Manufacturer SKU: TUN6966127 SKU: 6966127-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size (inscribed circle): 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Lead angle: 55° Special features Material: carbide Coating: AH6225 (PVD) Shape: rhombic (DNMG) Chipbreaker: double-sided Hole: cylindrical Application: turning (external and internal) FAQ What materials is this insert designed for? The AH6225 grade is formulated as a universal solution for stainless steels, offering a balance between edge sharpness and toughness ideal for medium cutting conditions. Is the insert reversible and how does the double-sided chipbreaker help? The double-sided chipbreaker allows use of both faces, extending the service life of each insert and improving economy compared with single-sided alternatives. How is holder compatibility ensured for this ISO DNMG insert? Compatibility depends on matching form, relief angle (0°), tolerance class, fastening method, size (11 mm) and thickness (4.76 mm); using an ISO DNMG holder with the correct seat ensures secure mounting. Which geometry values are important for setup and programming? Key dimensions are the inscribed circle 11 mm, thickness 4.76 mm, corner radius 0.2 mm and lead angle 55°; the cylindrical hole also affects clamping alignment. Can this insert be used for both external and internal turning operations? Yes, the insert is specified for external and internal turning, with chipbreaker and grade selected to suit typical stainless-steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and edge stability of the AH8015 grade together with the universal 55° rhombic geometry and a fine 0.2 mm nose radius for consistent finishing. Order the insert directly via Metav Werkzeuge or request application advice from their consultants for optimal holder compatibility and process setup. DNMG 110402 AH8015 — Indexable turning insert, PVD-coated carbide, 55° (Tungaloy) A DNMG 110402 AH8015 indexable insert designed for general turning, especially suited to machining heat‑resistant alloys and mixed steels in external and internal turning operations PVD-coated carbide grade AH8015 55° rhombic geometry for versatile turning 0.2 mm nose radius for accurate finishes Double-sided insert with cylindrical central hole Consistent edge behaviour and extended tool life The combination of the AH8015 cutting grade and a PVD-coated surface provides a balance between wear resistance and edge stability, making the insert well suited to machining heat‑resistant alloys and mixed materials. The coating reduces flank wear at elevated temperatures and assists in maintaining a sharp cutting edge for longer intervals, which directly contributes to improved tool life and fewer indexations. This results in a more predictable process and reduced downtime for tool changes. Geometry and mounting that ensure repeatable set-up The 55° rhombic form paired with a 0° clearance angle offers a versatile geometry for both finishing and medium turning tasks. The insert size of 11 mm with a thickness of 4.76 mm and a 0.2 mm nose radius supports precise dimensional control and surface quality. The ISO-standard designation guarantees compatibility: correct selection of holder form, clearance angle, tolerance class, fastening and thickness ensures secure clamping and consistent cutting geometry across production batches. The central hole and cylindrical seating simplify alignment in compatible clamping systems. Productivity improvements and straightforward maintenance A double-sided design with an integrated chipbreaker lowers per‑edge costs and minimises tool inventory by offering multiple usable edges before disposal. The balanced grade and chip control reduce the tendency for built‑up edge when machining tough alloys, which helps to lower cycle time and maintain surface finish with fewer interventions. For workshop practice, using a matched underlay, clamping kit and replacement screws completes the system for fast indexation and straightforward maintenance, delivering predictable performance in serial production. For tailored selection of Tungaloy DNMG 110402 AH8015 inserts and fast supply, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for expert application advice and procurement support Technical data Article number: 6947165 Manufacturer SKU: TUN6947165 SKU: 6947165-Tungaloy Model series: ISO turning indexable inserts Numbers / Core technical data Size: 11 mm Thickness: 4.76 mm Clearance angle: 0° Lead/wedge angle: 55° Corner radius: 0.2 mm Design & special features Material: carbide (PVD‑coated) — grade AH8015 Rhombic insert form (DNMG110402) Double-sided with integrated chipbreaker Cylindrical central hole for secure seating ISO‑standard turning insert suitable for external and internal turning Recommended for heat‑resistant alloys and general turning applications FAQ What materials is this insert suitable for? The DNMG 110402 AH8015 insert is formulated for general turning and is particularly recommended for machining heat‑resistant alloys and mixed steels where a balance of wear resistance and edge strength is required. How does the AH8015 grade improve process reliability? The AH8015 grade, with its PVD coating, offers stable wear behaviour and a robust cutting edge, which leads to more predictable tool life and fewer interruptions for reindexing when compared with uncoated grades. Which holders are compatible with this ISO insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening and thickness. The DNMG110402 designation and the central hole mean it fits ISO‑compliant external holders and certain boring bars designed for rhombic DNMG inserts. How does the double-sided design affect economics? A double-sided insert provides additional usable edges, reducing the frequency of insert changes and lowering cost per cutting edge while maintaining consistent cutting geometry throughout its service life. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius supports fine finishing operations, delivering improved surface quality while still being robust enough for light to medium turning passes when combined with proper feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of balanced wear resistance and edge stability together with ISO compatibility for reliable turning results; the double-sided design reduces cost per edge and supports continuous production. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG110402 AH8015 Tungaloy indexable insert for turning — ISO rhombic, PVD-coated carbide A DNMG110402 AH8015 indexable insert designed for precision external and internal turning of heat-resistant alloys, supplied as an ISO-compliant rhombic insert for standard toolholders ISO rhombic DNMG geometry PVD-coated carbide for heat resistance Double-sided, economical indexable insert 0.2 mm corner radius for versatile finishing Consistent performance on heat-resistant alloys The AH8015 grade, a PVD-coated carbide, is formulated for the general machining of heat-resistant alloys where a balance between wear resistance and cutting-edge stability is required. The coating reduces adhesive wear at elevated temperatures and supports longer tool life in demanding cycles. With the DNMG110402 geometry and a 55° approach angle, cutting forces are directed to provide stable engagement and predictable chip formation, which helps maintain dimensional accuracy in serial production. The double-sided layout contributes to economical use of the insert by offering two cutting edges per insert, reducing overall tooling costs while preserving surface quality. Easy integration and predictable clamping behaviour Compatibility with existing holders is governed by form, clearance angle, tolerance class, fixing method, size and thickness; this insert follows ISO conventions to simplify selection. The rhombic plate, supplied with a cylindrical hole, fits standard DNMG toolholders and benefits from a 0° clearance angle for consistent seat contact. The plate measures 11 mm across and a 4.76 mm thickness, providing a robust seating area that minimises vibration in roughing passes and supports stable finishing. Selecting the appropriate chipbreaker and matching the AH8015 grade to the workpiece material enables efficient chip control and reduces the risk of built-up edge, improving process reliability. Longer intervals between tool changes and consistent surface finish The combination of carbide substrate and PVD coating offers a reliable resistance to flank and crater wear, contributing to extended tool life and fewer interruptions. The 0.2 mm corner radius is suitable for finishing and light profiling, yielding consistent surface textures without compromising edge strength for small depth cuts. Because the insert is double-sided, users benefit from a lower cost per edge and predictable replacement cycles—this supports leaner inventory management and fewer machine stoppages. Overall, this geometry and grade deliver repeatable results across batch production, helping to uphold quality standards with minimal setup adjustments. Contact Metav Werkzeuge today for tailored advice on integrating the Tungaloy DNMG110402 AH8015 into production workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 for stock and technical recommendations Technical data Article number: 6947079 Manufacturer SKU: TUN6947079 SKU: 6947079-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Designation: DNMG110402 Grade: AH8015 Core dimensions Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Approach angle: 55° Clearance angle: 0° Features and applications Double-sided geometry Cylindrical hole PVD-coated carbide substrate Application: Turning Suitable for heat-resistant alloys FAQ What materials is this insert suited for? This insert in grade AH8015 is optimised for machining heat-resistant alloys; the PVD-coated carbide composition of the DNMG110402 provides balanced wear resistance and edge stability for such materials. Is the DNMG110402 compatible with standard DNMG holders? Yes, the DNMG110402 follows ISO conventions for form and dimensions and fits compatible DNMG toolholders when matching the tolerance class, fixing method and plate thickness. How does the double-sided design affect cost and uptime? The double-sided configuration halves the cost per cutting edge compared with single-sided inserts and extends production intervals between insert changes, improving overall uptime and reducing tooling expenses. What chip control options are available with this plate? The insert is supplied with a doppelseitig (double-sided) chipbreaker arrangement; selection of the appropriate chipbreaker and cutting parameters will ensure controlled chips and stable machining for the intended material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated cemented carbide, balanced edge stability and ISO compatibility for steady turning performance; the insert offers robust chip control for heat‑resistant alloys and consistent tool life. Order the DNMG110402 AH8015 Tungaloy insert directly via Metav Werkzeuge or consult our application specialists for fitment and process advice. DNMG110402 AH8015 — Indexable turning insert, PVD‑coated cemented carbide, 55° rhombic (Tungaloy) The DNMG110402 AH8015 is an ISO‑standard, 55° rhombic indexable insert designed for external and internal turning, optimised for the general machining of heat‑resistant alloys and mixed‑material production tasks. PVD-coated cemented carbide grade AH8015 55° rhombic form DNMG for versatile turning Double-sided chipbreaker, cylindrical hole 0.2 mm corner radius, 4.76 mm plate thickness Reliable edge stability for demanding alloys The insert combines a PVD-coated surface with a cemented carbide substrate to deliver a balanced mix of wear resistance and edge strength. For firms machining heat‑resistant alloys, this balance reduces flank wear and maintains dimensional stability over longer tool life, which supports predictable cycle times and fewer insert changes. The grade is selected to resist the thermal and abrasive stresses typical of high‑temperature alloys while preserving the cutting edge. Secure clamping and ISO compatibility that save setup time Built to the ISO DNMG format, the insert matches standard holders by form, relief angle and thickness; the 55° geometry enables a wide range of turning operations. The cylindrical hole and standard tolerance class ensure consistent seating in the clamp and reliable repeatability, reducing the risk of runout and vibration during cutting. This compatibility shortens setup and tool‑change procedures on mixed machine fleets. Efficient chip control and stable cutting performance Featuring a double-sided chipbreaker, the design assists in fragmenting chips across different cutting conditions, which is especially helpful for interrupted cuts and variable feed rates. The combination of chip control and the 0.2 mm corner radius supports a good surface finish while guarding the cutting edge against overloads. Evening out chip flow decreases toolholder stress and increases productivity on continuous turning operations. Key dimensions and material benefits explained The insert’s 4.76 mm thickness and rhombic geometry contribute to mechanical stability under load, while the 55° angle provides a compromise between feed versatility and strength at the cutting edge. The PVD coating improves resistance to adhesive and abrasive wear and is particularly effective when machining materials that generate heat at the cutting zone. For general turning tasks and for first‑choice applications on heat‑resistant alloys, this combination of geometry, thickness and coating offers a dependable solution. Request a tailored recommendation or a stock check from Metav Werkzeuge for genuine Tungaloy inserts; specialists are available to advise on holder compatibility, cutting data and batch availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6793724 Manufacturer SKU: TUN6793724 SKU: 6793724-Tungaloy Name: DNMG110402 AH8015 Tungaloy insert Facts Angle: 55° Corner radius: 0.2 mm Thickness: 4.76 mm Plate size: 11 Special features Grade: AH8015 (PVD‑coated) Chipbreaker: double‑sided Hole: cylindrical hole Relief angle: 0° Application: turning (external and internal) System: ISO DNMG indexable insert format Material substrate: cemented carbide FAQ Which materials is this insert best suited for? The DNMG110402 AH8015 insert is optimised for heat‑resistant alloys and general machining tasks where a balance of wear resistance and edge stability is required. How does the AH8015 coating affect tool life? The PVD coating on the AH8015 grade reduces adhesive and abrasive wear, extending insert life under thermal load and improving consistency of results over repeated cycles. Is the insert compatible with standard DNMG holders? Yes. The insert conforms to the ISO DNMG format; form, relief angle, thickness and the cylindrical hole ensure correct seating in standard DNMG holders when the holder specification matches the insert dimensions. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius delivers a balance between edge strength and surface finish, offering improved tool life while still achieving good surface quality in finishing and medium‑duty turning operations. Can the double‑sided chipbreaker be used for interrupted cuts? The double‑sided chipbreaker improves chip control across varying feeds and interrupted cuts, promoting safer chip evacuation and stable machining in mixed‑operation environments. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110402 AH8015 Wendeplatten - Tungaloy
Take advantage of a proven combination of PVD‑coated carbide and ISO‑conform geometry for consistent machining of heat‑resistant alloys; the rhombic, double‑sided design with a cylindrical hole ensures secure clamping and economical indexable use. Order the insert directly via Metav Werkzeuge or consult their specialists for holder compatibility. DNMG110402 AH8015 Tungaloy turning insert (ISO turning insert) A DNMG110402 AH8015 insert designed for ISO‑standard external and internal turning, optimised for machining heat‑resistant alloys and general turning applications. PVD‑coated carbide grade AH8015 ISO DNMG110402 rhombic profile Double‑sided insert with cylindrical hole Optimised for heat‑resistant alloys Precision engagement and holder compatibility for steady results The ISO‑conforming DNMG110402 geometry delivers reproducible seating and clamping across standard turning holders. The rhombic profile provides a stable cutting edge while the central cylindrical hole and standard tolerance class assure consistent fixation; this reduces vibration and improves repeatability in batch production. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so the insert is best paired with holders specified for DNMG‑type plates. The ISO standardisation simplifies tool inventory and reduces set‑up time in series machining. Balanced wear resistance and edge stability for demanding alloys The PVD‑coated carbide grade AH8015 is formulated as a first choice for the general machining of heat‑resistant alloys, offering a compromise between wear resistance and edge robustness. The coating enhances adhesion resistance at elevated temperatures and supports longer tool life compared with uncoated grades in similar conditions. The 0.2 mm corner radius provides a defined cutting edge for good surface finish while controlling cutting forces; this makes the insert suitable for both finishing and medium cutting depths where edge stability is required. Process efficiency and straightforward tool management A double‑sided design effectively doubles the usable life per insert, improving cost efficiency in production environments. The plate thickness of 4.76 mm and an inscribed circle of 11 mm contribute to the insert’s rigidity, and the 0° relief angle is compatible with a wide range of standard holder geometries. The integrated chipbreaker and grade selection should be matched to workpiece material and machining conditions to maximise material removal rates and achieve consistent part quality. Tool management benefits from straightforward indexing and replacement procedures, reducing downtime. For reliable turning of heat‑resistant alloys, contact Metav Werkzeuge for technical advice on holder compatibility or to arrange supply of Tungaloy carbide inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support Technical data Article number: 6966128 Manufacturer SKU: TUN6966128 SKU: 6966128-Tungaloy Model series: ISO‑turning inserts Material: carbide Coating: PVD Grade: AH8015 Application: Turning Facts Corner radius: 0.2 mm Relief angle: 0° Geometry angle: 55° Plate thickness: 4.76 mm Inscribed size: 11 mm Special features ISO designation: DNMG110402 Rhombic plate shape Double‑sided with chipbreaker Central cylindrical hole for fastening Optimised for heat‑resistant alloys FAQ What materials is this insert suitable for? The AH8015 grade is formulated for machining heat‑resistant alloys and general turning; the PVD‑coated carbide substrate offers a balance of wear resistance and edge stability for those materials. Is the insert indexable on both sides? Yes, the plate is double‑sided, allowing indexing to extend usable tool life before replacement. Which ISO designation identifies the geometry? The insert follows the DNMG110402 ISO designation, indicating its rhombic form, size and geometry for compatible holders. What is the purpose of the central hole? The cylindrical hole allows secure fastening to compatible holders and ensures consistent positioning and clamping repeatability. How does AH8015 compare to other grades for temperature resistance? AH8015 is a PVD‑coated carbide grade selected as a first choice for general machining of heat‑resistant alloys, offering improved adhesion resistance at elevated temperatures and balanced edge stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110402 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a coated cermet grade (GT9530) that delivers improved surface finish and extended tool life, together with a standard ISO DNMG form that simplifies holder compatibility. Order the DNMG110402 GT9530 insert directly via Metav Werkzeuge or ask their consultants for application advice. DNMG110402 GT9530 indexable turning insert — coated cermet, Tungaloy A DNMG110402 GT9530 indexable insert developed for finishing and light general-purpose turning of steel, offering a wear-resistant coated cermet edge and a 55° rhombic geometry for predictable performance in stable set-ups. Coated cermet grade GT9530 for steel Optimised for finishing and light turning Rhombic DNMG shape, 55° cutting geometry Double-sided chipbreaker, cylindrical hole Consistent finishing performance with lower tool-change frequency The GT9530 coating is a coated cermet grade optimised for finishing to light universal turning of steel; it combines a hard ceramic matrix with a metallic binder to reduce flank wear and sustain cutting-edge integrity. In practice, this means more consistent surface finish across long runs and fewer index changes compared with conventional grades under stable machining conditions. The result is improved process reliability and less downtime for insert replacement. ISO conformity and straightforward holder selection Designed to the ISO DNMG standard, the insert’s rhombic form and 55° cutting geometry allow straightforward matching to appropriate external holders. Compatibility depends on form, clearance, tolerance class, fixing method, size and thickness; the DNMG110402 geometry with a 0° clearance angle and a cylindrical locating hole ensures secure clamping and accurate repeatability in many standard turning toolholders. Double-sided indexing makes stock management more efficient by offering two usable cutting edges per orientation. Practical application guidance for stable set-ups Best results with this grade are achieved under stable clamping and machine conditions, where finishing feeds and modest depths of cut favour high-quality surfaces. The 0.2 mm corner radius supports a fine profile while the 4.76 mm insert thickness contributes to rigidity. Choose a suitable holder and set conservative feeds for the first trials to confirm chip evacuation and surface integrity; the insert’s double-sided chipbreaker aids consistent chip control in common steel turning tasks. Process benefits and cost-effectiveness in production Adopting a wear-resistant cermet insert such as this reduces unplanned interventions and supports predictable tool-change intervals, improving overall equipment effectiveness. The DNMG110402 format and double-sided design reduce inventory variety and allow flexible turning strategies, while the GT9530 composition focuses on delivering longer tool life and better surface quality in repeatable production runs — a rational choice where part finish and stability are priorities. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific advice and availability of the Tungaloy DNMG110402 GT9530 insert Technical data Article number: 6797216 Manufacturer SKU: TUN6797216 Label: DNMG110402 GT9530 Tungaloy-Wendeplatte Series: ISO-Drehwendeschneidplatten Material: cemented carbide Shape: rhombic Hole style: cylindrical hole ISO designation: DNMG110402 Facts Corner radius: 0.2 mm Thickness: 4.76 mm Size: 11 mm Cutting geometry angle: 55° Clearance angle: 0° Special features Coating/type: coated cermet GT9530 Chipbreaker: double-sided Application: turning (finishing to light universal) Indexable, double-sided for two usable edges Compatibility: fits standard DNMG external holders FAQ What machining tasks is this insert designed for? The DNMG110402 GT9530 insert is specified for finishing and light general-purpose turning of steel where a combination of surface quality and extended tool life is required. Is the insert double-sided and how does that affect stock management? Yes, the insert features a double-sided chipbreaker; this provides two usable edges per orientation, reducing the number of inserts needed and simplifying inventory control. What are the key dimensions to check for holder compatibility? Verify the ISO DNMG designation, the 11 mm size, 4.76 mm thickness, 0.2 mm corner radius and the cylindrical hole to ensure the holder’s form, clamping method and tolerance class match the insert. Which materials is the GT9530 grade suitable for? GT9530 is a coated cermet grade optimised for steel; it is intended for wear-resistant finishing and light universal applications in stable machining conditions. How does the GT9530 grade influence surface finish and tool life? The coated cermet matrix of GT9530 reduces flank wear and maintains a stable cutting edge, yielding improved surface finish and longer intervals between index changes in suitable operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 GT9530 Wendeplatten - Tungaloy
Choose the GT9530 cermet grade for superior surface finish and extended tool life; the 0.2 mm corner radius and double-sided chipbreaker reduce changeovers and support productive turning in stable setups. Order directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. DNMG 110402 GT9530 Tungaloy turning insert — GT9530 cermet, 0.2 mm radius A DNMG110402 GT9530 ISO turning indexable insert designed for finishing and light universal turning of steel components. GT9530 cermet coating for improved tool life ISO DNMG110402 rhomboid insert, 55° approach 0.2 mm corner radius for fine finishing Double-sided chipbreaker with cylindrical hole Consistent finishing and extended tool life The GT9530 grade is a cermet variant engineered for wear resistance and an excellent surface result when turning steel under stable conditions. Its fine 0.2 mm corner radius produces a controlled cutting edge suitable for light finishing passes, helping to reduce rework and downstream processing. By combining the GT9530 substrate with a precision-ground geometry, the insert extends interval times between index changes and supports predictable tool-change planning in production runs. Seamless integration into ISO turning systems This insert complies with ISO DNMG dimensions and is compatible with standard DNMG holders when matched by form, clearance, tolerance class, fastening and thickness. The rhomboid shape and a 55° approach angle deliver a balance of accessibility and rigidity for typical external and internal turning tasks. The insert’s 4.76 mm thickness and the cylindrical hole ensure stable clamping; when combined with an appropriate clamping set and replacement screws, the system offers repeatable seating and process security. Improved chip control and machining stability A double-sided chipbreaker tailored to finishing and light universal cuts helps to maintain consistent chip formation and evacuation, which is especially important during medium-to-fine feeds. The cylindrical hole contributes to secure seating and reduces the risk of insert movement under load. For best results, select the chipbreaker and GT9530 grade in line with material, operation type and machine rigidity; this rational selection reduces vibration, improves surface quality and raises throughput. Practical benefits for workshop efficiency The two usable faces and standard ISO form mean fewer SKUs to hold in inventory and quicker in-process recovery through simple indexing. As an ISO-compliant insert made of carbide with a cermet finish, it merges the hardness needed for finishing with acceptable toughness for routine turning tasks. For machining teams seeking practical application advice or supplementary technical data, Metav Werkzeuge’s advisors are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Speak with Metav Werkzeuge for tailored application advice on the Tungaloy DNMG110402 GT9530 cermet insert to optimise finishing operations and improve process reliability Technical data Article number: 6797230 Manufacturer SKU: TUN6797230 Label: DNMG110402 GT9530 Tungaloy-Wendeplatte Core specifications Material: Carbide Grade: GT9530 Shape: Rhomboid (DNMG) Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Approach angle: 55° Special features Double-sided chipbreaker Cylindrical hole for secure clamping ISO-compliant turning insert series Designed for finishing and light universal turning of steel Compatible with ISO DNMG holders and clamping sets FAQ What applications suit this insert best? This insert is intended for turning, specifically finishing and light universal turning of steel, using the GT9530 cermet grade for improved surface quality. How does the GT9530 grade influence performance? The GT9530 cermet offers enhanced wear resistance and a fine cutting edge, which supports longer tool life and superior finishes on steel when machining under stable conditions. Is the insert compatible with standard DNMG holders? Yes, the insert follows ISO DNMG form factors; compatibility depends on matching holder form, clearance angle, tolerance class, fastening, size and thickness. What are the key dimensions to check when replacing an insert? Verify size (11 mm), thickness (4.76 mm), corner radius (0.2 mm), approach angle (55°) and whether the insert requires a cylindrical hole for the chosen clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, excellent surface finish and ISO compatibility to improve finishing productivity and component quality. Order the DNMG110402 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110402 NS9530 Tungaloy — ISO turning insert, uncoated cermet finishing grade The DNMG110402 NS9530 Tungaloy is an ISO-format turning insert intended for finishing steel components, engineered for continuous cuts and small depths of cut. DNMG 110402 format, 55° geometry Uncoated cermet NS9530 for finishing Double-sided chipbreaker for stable chips 11 mm size, 4.76 mm thickness High-precision finishing for steel components The NS9530 grade is an uncoated cermet developed as a finishing sort for steel, delivering a sharp cutting edge and low cutting forces that translate into finer surface textures. This composition is especially suitable for continuous cutting operations with small depths of cut and feed rates that prioritise surface quality over heavy material removal. The result is reduced need for secondary finishing and consistent part quality in batch production. Reliable ISO compatibility with standard holders The insert conforms to the ISO specification for DNMG geometry and therefore aligns with established toolholder systems when form, clearance angle, tolerance class, fastening method, size and thickness match. Its rhombic shape and 55° geometry promote access to external and internal turning tasks where approach angle and edge engagement affect component geometry. The presence of a cylindrical hole ensures secure clamping and repeatable positioning in most ISO-compatible clamping sets. Material and chip control explained for process stability As an uncoated cermet, the grade emphasises an ultra-sharp edge and high surface finish rather than heavy wear resistance; this makes it the preferred choice for finishing passes on steels. The double-sided chipbreaker supports reliable chip formation under continuous cutting conditions, aiding machine uptime and coolant flow. For applications requiring higher removal rates or interrupted cuts, a different grade or geometry should be selected to match stability and material behaviour. For tailored advice on Tungaloy finishing inserts and rapid availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797238 Manufacturer SKU: TUN6797238 Seller SKU: 6797238-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Geometry angle: 55° Clearance angle: 0° Hole style: cylindrical hole Special features Rhombic insert form Double-sided chipbreaker Uncoated cermet NS9530 Carbide substrate ISO-format DNMG110402 Application: Turning FAQ What materials is this insert designed for? The NS9530 finishing grade is optimised for steel; the DNMG110402 NS9530 Tungaloy insert provides a sharp edge and low cutting forces tailored to produce a high surface finish on steel components. Is this insert suitable for both external and internal turning? Yes, the rhombic DNMG geometry and 55° approach make the insert suitable for external and many internal turning applications when used with ISO-compatible holders. Does the insert have a coating? The DNMG110402 NS9530 is an uncoated cermet grade, chosen to maximise edge sharpness and surface quality rather than provide a coating-based wear barrier. How does the chipbreaker affect machining? The double-sided chipbreaker promotes stable chip formation during continuous finishing cuts, assisting consistent surface results and manageable chip evacuation with coolant. What are the key dimensions to check for holder compatibility? Check the insert size (11 mm), thickness (4.76 mm), corner radius (0.2 mm), hole style (cylindrical hole) and the ISO DNMG form to ensure proper matching with the toolholder and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 NS9530 Wendeplatten - Tungaloy
Consistent finishing and reduced cutting forces are delivered by the combination of the NS9530 uncoated cermet and the 55° rhombic geometry, while the double-sided chipbreaker supports reliable chip control and repeatable indexing. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility. DNMG110402 NS9530 ISO turning insert — uncoated cermet, 55° rhombic (Tungaloy) The DNMG110402 NS9530 is an ISO-format turning insert intended for finishing on steel, offering a sharp cutting edge, low cutting forces and a consistent surface finish. DNMG110402 55° rhombic geometry NS9530 uncoated cermet for fine finishing Double-sided chipbreaker for consistency Cylindrical hole, compatible with standard holders Optimised geometry for predictable finishing The ISO-format insert combines a 55° rhombic geometry with a finely honed cutting edge to produce consistent surface quality at small depths of cut. The NS9530 uncoated cermet substrate is designed to maintain edge integrity during continuous cutting, reducing the need for frequent regrinds. In practice, this means fewer process interruptions and a more reliable turn-mill flow when machining steel parts where finish and dimensional control are priorities. Low cutting forces and predictable chip behaviour A finishing grade formulated for low cutting forces reduces power draw and vibration, which directly benefits surface finish and tool life. The integrated double-sided chipbreaker helps to shape and evacuate chips even in light cuts, while the 0.2 mm corner radius supports small-step finishing without creating chatter. The cutting geometry, combined with the cermet’s hardness, lowers flank wear and maintains a sharp cutting edge for longer runs on continuous operations. Straightforward integration into ISO tooling systems Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s ISO format and cylindrical hole make it straightforward to fit a wide range of standard holders. With a nominal 11 mm size and 4.76 mm thickness, the component indexes simply thanks to its double-sided design, offering quick seat changes and reduced downtime. Specifying a matching holder that respects the insert’s geometry and tolerance class ensures repeatable positioning and consistent part quality. For precision finishing with Tungaloy NS9530 cermet inserts, contact Metav Werkzeuge for tailored selection and immediate availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966129 Manufacturer SKU: TUN6966129 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Core dimensions Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Cutting edge angle: 55° Design & material Shape: rhombic Hole: cylindrical Grade: NS9530 (uncoated cermet) Substrate: carbide Chipbreaker: double-sided Application: turning, finishing on steel FAQ What operations is this insert designed for? The DNMG110402 NS9530 insert is optimised for finishing operations in turning, where a sharp edge and low cutting forces are required for excellent surface quality. Which materials suit this grade best? This Tungaloy NS9530 finishing grade is intended primarily for steel machining and performs well in continuous cuts with small depths of cut. Is the insert indexable and reversible? Yes, the component is double-sided and indexable, allowing rotation to a fresh cutting edge and helping to extend tool life and reduce inventory. How is holder compatibility determined? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the holder ensures correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of precise edge quality, low cutting forces, and excellent surface finish for consistent finishing operations; order the DNMG110402 NS9530 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG110402 NS9530 Tungaloy — ISO turning insert, uncoated cermet, 55° rhombic geometry DNMG110402 NS9530 is an ISO‑standard turning insert designed for fine finishing of steel; the rhombic 55° geometry and sharp cutting edge suit continuous cuts and small depths of cut. Uncoated cermet NS9530 for superior finish Sharp cutting edge with low cutting forces ISO DNMG 110402, 55° rhombic geometry Double-sided chipbreaker, cylindrical hole High‑precision finishing with consistent surface quality The uncoated cermet NS9530 grade provides a notably sharp cutting edge and reduced friction, which together deliver a superior surface finish on steel during finishing passes. The moderate corner radius of 0.2 mm supports fine turning and helps to maintain consistent part geometry where small depths of cut are required. For operations where surface integrity and dimensional accuracy are the priority, this insert reduces the need for secondary finishing while maintaining predictable tool life. Geometry and chip control that stabilise the process The DNMG design with a 55° rhombic geometry and double‑sided chipbreaker ensures stable cutting performance and reliable chip formation in continuous turning. The cylindrical hole and ISO‑conforming dimensions provide secure clamping and repeatable positioning in ISO holders, reducing setup variation. Low cutting forces, a consequence of the sharp cermet edge, lower vibration risk and contribute to improved productivity through fewer rejected parts and less machine downtime. System compatibility and economical integration Supplied as an ISO‑standard indexable plate, the insert integrates into common turning systems using an appropriate external holder or boring bar; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The modest plate thickness of 4.76 mm and standard size 11 facilitate straightforward replacement and inventory management. Selecting the NS9530 grade for finishing steel can shorten cycle times and reduce downstream rework, improving overall process economics. Practical application notes for reliable results Best suited to continuous cutting and small feed/pass scenarios, this uncoated cermet insert excels in producing high‑quality finishes on steel. The 0° clearance angle and precise corner radius favour stable contact and predictable tool behaviour. For best results, pair the insert with a holder matched to ISO DNMG geometry and choose cutting parameters aligned with light finishing cuts; this combination preserves the sharp edge and prolongs the interval between indexings. For precise finishing with original Tungaloy quality, contact Metav Werkzeuge for availability and tailored advice — Metav Werkzeuge can assist with selection and technical queries at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6797229 Manufacturer SKU: TUN6797229 Merchant SKU: 6797229-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DNMG110402 Facts Lead angle: 55° Corner radius: 0.2 mm Clearance angle: 0° Plate thickness: 4.76 mm Size: 11 Special features Uncoated cermet grade NS9530 Rhombic insert, DNMG geometry Double‑sided chipbreaker Cylindrical hole for secure clamping Intended application: turning (finishing steel) Compatible with ISO holders FAQ What are the primary applications for this insert? The DNMG110402 NS9530 Tungaloy turning insert is intended for finishing operations on steel, delivering low cutting forces and an excellent surface finish in continuous cuts. Is this insert suitable for heavy roughing? No, the NS9530 uncoated cermet grade and 0.2 mm corner radius are optimised for finishing and light cuts rather than heavy roughing. How is the insert secured in the holder? The insert features a cylindrical hole and ISO DNMG form; secure clamping is achieved using the appropriate ISO external holder or boring bar designed for DNMG plates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of sharp cermet performance, ISO DNMG compatibility and a fine 0.2 mm corner radius for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 110402 NS9530 Tungaloy — Cermet Turning Insert for Precision Finishing A DNMG110402 NS9530 indexable insert engineered for precision external and internal turning, offering a sharp cutting edge and low cutting forces for high-quality steel finishing. NS9530 cermet for superior surface finish ISO‑compliant DNMG shape for broad compatibility 0.2 mm corner radius for fine finishing Consistent high-quality finishes for steel components The uncoated cermet NS9530 is formulated for low cutting forces and a sharp cutting edge, making it especially suitable for finishing operations on steel. The fine 0.2 mm corner radius reduces material deformation at the cut, which helps achieve a smoother surface and tighter dimensional tolerances. For practical terms: a lower cutting force typically means reduced tool vibration and improved stability during continuous cuts, which directly benefits cycle consistency and part quality. Reliable fit and clamping for uninterrupted production Designed to the ISO DNMG geometry, the insert matches standard rhombic holders and clamping systems; the 55° included angle ensures predictable contact conditions in the toolholder. The rhombic form with a cylindrical centre hole provides secure fixation and straightforward indexability. This compatibility minimises machine set‑up time and reduces the risk of incorrect seating, supporting efficient tool changes and predictable process repeatability. Economical finishing and predictable tool life As an uncoated cermet, this grade prioritises surface integrity and edge stability rather than aggressive stock removal, so the insert is ideal for small depths of cut and continuous feeds. The double‑sided chipbreaker extends usable edge life by enabling two cutting edges per index, improving cost per part. In production terms, selecting this grade for finishing can lead to fewer reworks and consistent finish quality, supporting overall shopfloor productivity. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy DNMG110402 NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder compatibility and delivery options Technical data Article number: 6797215 Manufacturer SKU: TUN6797215 Manufacturer: Tungaloy Dimensions & core data Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 55° Relief angle: 0° Design & special features Material: Hartmetall Grade: NS9530 (uncoated cermet) Shape: Rhombic (DNMG) Hole: With cylindrical hole Chipbreaker: Double-sided Typical application: Turning (external and internal) FAQ Which materials is this insert optimised for? The NS9530 grade is optimised for finishing operations on steel, offering a sharp cutting edge and improved surface quality for continuous cuts. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius reduces cutting forces and deformation at the edge, resulting in finer surface finishes and greater dimensional consistency when finishing steel components with small depths of cut. Is the insert compatible with standard DNMG holders? Yes, the DNMG geometry and cylindrical central hole ensure compatibility with ISO‑standard external and internal turning holders, supporting secure clamping and easy indexing. Can the insert be used for interrupted cuts? The NS9530 cermet is primarily a finishing grade for continuous cuts; for heavily interrupted cutting conditions, alternative grades designed for impact resistance are recommended. How many usable edges does the insert offer? The double‑sided chipbreaker enables multiple indexing positions, allowing effective use of more than one cutting edge to extend service life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated carbide and a secure, ISO-compatible clamping system combine to deliver stable productivity for turning operations; the double-sided chipbreaker extends usable life and reduces tooling costs. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. DNMG 110402 T6215 indexable turning insert — Tungaloy A reliable DNMG110402 T6215 indexable insert engineered for precision turning of rostfreier Stahl in stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Rhombic DNMG form, 55° cutting angle Double-sided chipbreaker, 0° rake Increased uptime with a wear-resistant grade The combination of a CVD-coated carbide substrate and the specially developed T6215 grade is aimed at improving tool life in continuous and lightly interrupted turning of rostfreier Stahl. The surface coating reduces abrasive wear and supports consistent edge integrity across multiple cuts. By selecting a double-sided chipbreaker, production runs benefit from predictable chip control and lower tooling consumption, which results in fewer indexings and less unplanned downtime. This insert therefore contributes directly to steady cycle times and repeatable component quality. Secure fitting and ISO-system compatibility for reliable operation The rhombic DNMG form with a 55° approach angle is widely specified for external and internal turning where access and clearance are critical. The geometry features an 11 mm inscribed circle and a plate thickness of 4.76 mm, combined with a 0° rake and a 0.2 mm corner radius to balance strength and finish. A cylindrical through-hole ensures positive seating and reproducible clamping when used with the correct holder, clamp set and screws. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so selection against the corresponding ISO turning holder is essential for safe, vibration-free cutting. Cost-efficiency through indexability and process stability The double-sided design delivers two indexable cutting edges per insert, enhancing cost-efficiency on series production. Matched to the correct chipbreaker and used within its intended stability window, this grade offers improved surface finish and reduced flank wear; the outcome is a lower cost per component and fewer tool changes. Combined with the brand’s manufacturing precision, the insert supports predictable process behaviour and simplified inventory management, making it suitable for job shops and production lines aiming to standardise on robust, repeatable turning solutions. For application recommendations, toolholder compatibility checks or to secure supply of Tungaloy T6215 indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical data Article number: 6944639 SKU: 6944639-Tungaloy Manufacturer SKU: TUN6944639 Model series: ISO turning indexable inserts Material: carbide Facts Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle (rake): 0° Cutting angle: 55° Special features CVD-coated carbide grade T6215 Rhombic DNMG plate form Double-sided chipbreaker Cylindrical hole for secure clamping Suitable for external and internal turning of rostfreier Stahl Compatible with ISO turning holders; system requires holder, clamp set and screw FAQ Is this insert suitable for machining rostfreier Stahl? The DNMG110402 T6215 insert is designed specifically for turning rostfreier Stahl under stable to lightly interrupted conditions and offers improved wear resistance thanks to its CVD-coated carbide grade. What does the DNMG110402 designation indicate? DNMG denotes the rhombic plate form; the 110402 coding reflects the inscribed circle, thickness and corner radius typical to that ISO format used for turning inserts like this one. How is the insert mounted and secured? The plate has a cylindrical through-hole and is secured in an appropriate ISO turning holder using the recommended clamp set and screw to ensure consistent, vibration-free seating. How many times can the insert be indexed? This is a double-sided insert offering two usable cutting edges; actual indexings depend on machining conditions and material abrasiveness, but the T6215 grade is formulated for extended edge life. Which chipbreaker should be selected for best results? Select the chipbreaker variant that matches the workpiece, cutting parameters and machine rigidity; the built-in double-sided chipbreaker on this plate supports reliable chip control in typical turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, precise geometrical control and straightforward holder compatibility for consistent stainless steel turning. Benefit from the CVD-coated carbide grade designed for stable to slightly interrupted cuts and secure double-sided use. Order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. DNMG110402 T6215 turning insert (ISO) — Tungaloy, CVD-coated carbide for stainless steel DNMG110402 T6215 is an ISO-standard indexable insert for turning applications, designed for reliable machining of stainless steel with a 55° rhombic geometry and secure clamping CVD-coated carbide for stainless steel ISO DNMG110402 compatible insert 55° rhombic geometry, 0° clearance angle Double-sided chipbreaker with cylindrical hole High wear resistance for sustained stainless steel productivity The CVD-coated carbide grade T6215 offers increased wear resistance tailored for machining stainless steel under stable to lightly interrupted cutting conditions. The coating improves abrasion resistance and thermal stability, which translates into longer edge life and fewer index changes during production. With a 0° clearance angle and a 55° rhombic geometry, the insert provides a balance between cutting strength and accessibility in external and internal turning. The result is more predictable tool life and reduced machine downtime, improving overall machining economy. Secure clamping and precise geometry reduce setup time The insert's rhombic shape and cylindrical hole enable reliable clamping in compatible holders, while the ISO designation ensures straightforward selection across standard turning systems. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so correct holder matching avoids runout and vibration. The double-sided design allows both faces to be used, effectively halving tooling consumption for the same part count. The integrated geometry supports consistent chip flow and surface finish, lowering rework rates and enhancing process reliability. Simple integration and clear technical benefits for production planning As part of an ISO turning insert system, the component is intended to be used with a matching external holder or boring bar, plus the necessary backing/locking set and replacement screws. The 0.2 mm corner radius provides a compromise between edge robustness and surface quality: a small radius helps to maintain dimensional accuracy and reduce burr formation on thin-walled components. For users less familiar with coatings, CVD-coated refers to a chemical vapour deposition process that bonds wear-resistant layers to the substrate, improving life under higher temperatures typical of stainless steel machining. Choosing the right chipbreaker and grade for the material and stability conditions secures the best combination of finish and economy. Contact Metav Werkzeuge today to discuss the Tungaloy DNMG110402 T6215 insert for stainless steel turning, confirm holder compatibility and arrange a tailored recommendation — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6944592 SKU: 6944592-Tungaloy Manufacturer SKU: TUN6944592 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Designation: DNMG110402 T6215 Material: carbide Facts Insert size: 11 mm Thickness: 4.76 mm Cutting angle: 55° Clearance angle: 0° Corner radius: 0.2 mm Coating / grade: T6215 (CVD-coated) Intended for: stainless steel turning Special features Rhombic shape (55°) Double-sided chipbreaker Cylindrical hole for secure clamping ISO-standard insert form DNMG110402 Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert designed for? The Tungaloy DNMG110402 T6215 insert is specified for machining stainless steel, with a grade optimised for wear resistance in stable to slightly interrupted turning operations. How does the double-sided design affect tooling costs? Using both sides of the indexable insert extends usable edge count and reduces the number of inserts required over time, improving tooling cost efficiency for repetitive turning tasks. What does the T6215 designation indicate? T6215 denotes a CVD-coated carbide grade developed for enhanced abrasion resistance and thermal stability when machining stainless steels; it is chosen for longer edge life under the described conditions. Is the insert compatible with all DNMG holders? The insert follows the ISO DNMG110402 form, but compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; correct holder matching is essential for optimal performance. How does corner radius influence surface finish? The 0.2 mm corner radius increases edge strength while maintaining good surface finish; smaller radii aid dimensional accuracy, whereas larger radii improve edge robustness for heavier cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com