DNGG 150404 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing and consistent chip control thanks to the combination of an uncoated cermet NS9530 grade and a rhombic 55° geometry; this yields low cutting forces and reliably high surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DNGG 150404 NS9530 turning indexable insert – Tungaloy, rhombic 15 mm, 0.4 mm nose radius The DNGG150404 NS9530 is an ISO-standard rhombic turning insert designed for fine finishing and continuous cutting in steel applications. Uncoated cermet NS9530 for fine finishing Rhombic 15 mm geometry, 55° approach angle 0.4 mm nose radius for precision turning Double-sided design with cylindrical hole Achieve consistent, high-quality surface finishes with low forces The insert is manufactured in the NS9530 grade, an uncoated cermet optimised for finishing cuts on steel. The microstructure of this grade provides a sharp cutting edge and reduced built-up edge tendency, which translates into low cutting forces and improved tool life under continuous-cut conditions. For operations where surface integrity is paramount, the combination of cermet chemistry and the rhombic geometry reduces vibration and supports stable cuts, producing the consistent finishes demanded in high-value components. Secure fitting and system compatibility for predictable productivity Designed as an ISO-standard turning insert, the part fits a wide range of external holders and boring bars when form, clearance angle, tolerance class, fastening method, size and thickness align. The rhombic shape with a 55° approach angle offers versatility for external and internal turning; the cylindrical hole enables positive clamping and repeatable positioning. Integrating this insert into a matched tool system (holder, shim and clamping set) ensures predictable process behaviour and helps to reduce set-up time and scrap rates in production runs. Material advantages and recommended cutting approach for steel finishing With a 0.4 mm nose radius and a sharp, finishing-grade edge, the insert excels at small depth-of-cut passes and continuous feeds where surface quality is required. The grade’s wear characteristics are tuned for steel finishing: expect fine finishes at conventional speeds without the need for coatings. The double-sided concept gives economical edge utilisation, while the rhombic geometry supports light to moderate feed settings for improved dimensional control. If further machining data is needed for specific alloys or feed-speed windows, Metav Werkzeuge can supply application charts and recommendations. For application-specific guidance or to arrange supply of the Tungaloy DNGG150404 NS9530 insert, contact Metav Werkzeuge for tailored advice and rapid delivery options. Technical Data Article number: 6997800 SKU: 6997800-Tungaloy Manufacturer SKU: TUN6997800 Model series: ISO-Drehwendeschneidplatten Designation: DNGG150404 NS9530 Facts Size: 15 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Approach/wedge angle: 55° Hole: with cylindrical hole Special features Rhombic plate form Double-sided chipbreaker ISO-standard turning insert Uncoated cermet grade NS9530 Intended application: turning FAQ What materials is this insert intended for? The DNGG150404 NS9530 Tungaloy indexable insert is formulated primarily for finishing of steel; the NS9530 cermet grade is optimised for continuous cuts and low cutting forces when machining steel. How is the insert secured in the toolholder? The part features a cylindrical hole for clamping; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness—ensure the holder matches the ISO geometry. Can the insert be used for internal and external turning? Yes, the rhombic 55° geometry and double-sided design make it suitable for both external and internal turning operations where a finishing edge is required. What cutting conditions are recommended for best surface finish? For the NS9530 grade, small depths of cut and continuous feeds at conventional finishing speeds yield the best high surface finish and tool life; consult Metav Werkzeuge for process windows for specific steels. How many usable edges does the insert provide? The insert is double-sided, offering economical edge changes and extended use before replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of ISO conformity, a finishing-grade uncoated cermet and a fine 0.4 mm nose radius for consistently high surface quality and low cutting forces. Order the DNGG 150404 NS9530 insert directly via Metav Werkzeuge or consult our specialists if holder compatibility needs clarification. DNGG 150404 NS9530 Tungaloy turning insert — uncoated cermet, 0° relief, 0.4 mm radius A DNGG 150404 NS9530 indexable turning insert designed for precision finishing of steel components in ISO-based turning systems. Precision 0.4 mm nose radius Uncoated cermet for high surface finish ISO-compatible rhombic insert Cylindrical hole for secure mounting Achieve superior surface finish with a specialised finishing grade The NS9530 grade is an uncoated cermet formulated for finishing operations on steel, providing a sharp cutting edge and low cutting forces. With a 0° relief angle and a 0.4 mm nose radius, this design minimises form deviation and supports continuous cutting at small depths of cut, resulting in fewer passes to reach target tolerances and a high surface quality. For production environments where consistent part finish and reduced rework are priorities, the insert’s geometry delivers predictable outcomes and efficient cycle times. Streamlined fitting and dependable clamping for minimal setup time Compatibility with standard holders is determined by form, relief angle, tolerance class, attachment, size and thickness; the insert’s rhombic shape and cylindrical hole permit secure, repeatable mounting in ISO-specification external holders or boring bars. The double-sided chipbreaker ensures use of both cutting edges, extending service life per indexation. These features reduce downtime for tool changes and simplify tool inventory management when matching inserts to holder families across the shop floor. Production gains through stable chip control and repeatable results Designed for turning operations, the insert supports stable chip formation when paired with the appropriate chipbreaker and machining parameters, improving process stability and part-to-part consistency. The combination of the NS9530 cutting material and the insert’s precise geometry contributes to repeatable finishing and reliable dimensional control, which in turn supports higher first-pass yields and predictable maintenance intervals. Selection of the correct chipbreaker and grade according to workpiece material and machine stability will optimise tool life and overall efficiency. For specialist advice on Tungaloy finishing inserts such as the DNGG 150404 NS9530, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm holder compatibility and stock availability. Technical data Article number: 6997797 Manufacturer SKU: TUN6997797 SKU: 6997797-Tungaloy Designation: DNGG150404 NS9530 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Core specifications Nose radius: 0.4 mm Relief angle: 0° Inscribed circle/size: 15 mm Thickness: 4.76 mm Included angle: 55° Features Shape: rhombic Hole: with hole (cylindrical hole) Chipbreaker: double-sided Cutting material: uncoated cermet (NS9530) Base material: carbide Application: turning (finishing for steel) ISO designation: DNGG150404 FAQ What is the primary application of this insert? The DNGG 150404 NS9530 insert is intended for turning operations, specifically as a finishing grade for steel where a fine surface finish and low cutting forces are required. Can the insert be mounted in standard ISO holders? Yes, the insert is ISO-compatible; proper compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness to match the selected holder or boring bar. How does the NS9530 cutting material perform compared with coated grades? The uncoated cermet NS9530 delivers a very sharp edge and excellent surface quality for finishing cuts; coated grades may be preferable for tougher cutting conditions or interrupted cuts, while NS9530 excels in continuous finishing operations. Is this insert indexable on both sides? Yes, the insert features a double-sided chipbreaker, allowing indexation to use both cutting edges and extend overall tool life. Which workpiece materials are recommended for this insert? This grade is optimised for steel finishing; selection of the chipbreaker and cutting parameters should be matched to the specific steel grade and machining conditions for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO‑compliant geometry and the sharp TH10 uncoated carbide to achieve low cutting forces and clean surface finishes in both external and internal turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNGG 150404 TH10 – ISO turning insert for external and internal turning, Tungaloy The DNGG150404 TH10 is an ISO‑standard rhombic turning insert designed for general turning operations, offering a 55° geometry, a 0° clearance angle and a 0.4 mm corner radius for fine contouring. ISO rhombic insert DNGG150404, 55° angle Uncoated cemented carbide, grade TH10 0.4 mm corner radius for precise edges Double-sided chipbreaker with cylindrical hole Enhanced cutting performance with a sharp universal grade The DNGG150404 TH10 insert combines an ISO‑standard rhombic shape with a sharp TH10 uncoated cemented carbide to reduce cutting forces and improve surface quality when turning non‑ferrous and delicate materials. The uncoated substrate supports low friction at the cutting edge, which helps to avoid smearing and build‑up on the tool face; this is particularly beneficial in finishing passes where dimensional accuracy and surface integrity matter. The result is a stable cutting process with predictable tool behaviour, supporting higher first‑pass yields and consistent cycle times. Compatibility and practical mounting for workshop use The insert’s form, free clearance, tolerance class, fixation and dimensions ensure straightforward compatibility with standard external holders and boring bars. Featuring a cylindrical hole and a double‑sided chipbreaker, the design allows use on both sides and simplifies inventory management. With an insert thickness of 4.76 mm and a 15 mm inscribed circle, the component fits common ISO‑compatible clamping systems; selecting the matching holder and correct clamping set secures repeatable seating and accurate runout, reducing setup time and potential rework. Application guidance and material suitability This grade is optimised for turning applications where low cutting forces and clean finishes are required, such as machining aluminium, brass and non‑ferrous alloys. The sharp edge geometry of TH10 supports delicate profiling and fine contours when a 0.4 mm corner radius is specified. For general turning, choose cutting parameters that exploit the uncoated edge—moderate feeds and speeds that avoid thermal overload—so the insert delivers reliable surface quality without premature edge degradation. Operational advantages and process reliability The double‑sided chipbreaker and 55° rhombic geometry enable efficient chip control and offer symmetrical usage to lengthen tool life per indexation. The 0° clearance angle and compact form factor make the insert suitable for both external turning and internal boring where access is constrained. By standardising on ISO‑compliant inserts such as this one, workshops benefit from flexible tool setups, easier stock management and predictable tool change intervals that support lean production practices. Discuss the DNGG150404 TH10 with Metav Werkzeuge to identify the optimal holder and cutting data for the specific material and process — contact Metav Werkzeuge for personalised advice and prompt supply. Technical data Article number: 6803202 Manufacturer SKU: TUN6803202 Label / short name: DNGG150404 TH10 Tungaloy‑insert Facts ISO code: 150404 Inscribed circle: 15 mm Insert thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Material: cemented carbide Grade: TH10 (uncoated), sharp universal for non‑ferrous Double‑sided chipbreaker Rhombic insert shape Suitable for external and internal turning ISO‑standard geometry for broad holder compatibility FAQ What materials is this insert best suited for? The DNGG150404 TH10 insert is intended for non‑ferrous materials and applications where a sharp, uncoated edge reduces cutting forces and improves surface finish. How is chip control achieved with this insert? Chip control is provided by a double‑sided chipbreaker, which supports effective chip formation and evacuation during both finishing and general turning operations. Does the insert fit standard ISO holders? The insert follows ISO dimensions (150404) and is compatible with holders that match its form, tolerance class, thickness and fixation method. What are the key dimensional parameters to check when selecting a holder? Confirm the inscribed circle (15 mm), insert thickness (4.76 mm), corner radius (0.4 mm) and the presence of a cylindrical hole for correct seating and clamping. Can the insert be used for internal boring as well as external turning? Yes, the rhombic 55° geometry and compact profile make the insert suitable for both external turning and internal boring where access allows. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNGG 150404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, a sharp uncoated carbide grade for low cutting forces, and a secure clamping geometry for reliable turning productivity. Order original Tungaloy inserts through Metav Werkzeuge or consult our team for application-specific advice. DNGG 150404 TH10 indexable turning insert by Tungaloy — 55° rhombic geometry The DNGG 150404 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning applications where low cutting forces and clean surface finish are required. ISO-standard rhombic insert, 55° cutting angle Uncoated carbide grade TH10 for non-ferrous metals Double-sided chipbreaker for consistent chips Cylindrical-hole design for secure clamping Predictable chip control for efficient turning The combination of a double-sided chipbreaker and a sharp TH10 grade creates predictable chip formation, which reduces the risk of chip-related interruptions during production. The uncoated cemented carbide edge is designed to deliver low cutting forces and a clean surface finish when machining non-ferrous materials, making it suitable for aluminium, brass and many plastics. Lower cutting forces translate into reduced spindle load and can enable higher feed rates or longer tool life on unstable set-ups, which improves overall machining efficiency and reduces production costs per component. Secure seating and standardised fit reduce set-up time Built to ISO dimensions, the rhombic insert with a 55° cutting angle and a cylindrical hole ensures repeatable mounting and stable clamping in compatible holders. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening, overall size and thickness; using ISO-standard components simplifies sourcing and reduces set-up time. The robust geometry and standardised thickness help maintain cutting position and reduce vibration, supporting consistent dimensional accuracy and surface quality across batches. Why the TH10 grade and uncoated carbide matter An uncoated carbide grade like TH10 provides a sharp cutting edge that excels where low cutting forces and excellent surface finish are priorities. Unlike coated grades that add wear resistance for high-temperature or abrasive operations, a sharp uncoated edge cuts cleanly in soft-to-medium materials and helps avoid built-up edge on sticky alloys. This makes the insert a rational choice for shops machining non-ferrous components, prototype work or finishing passes where surface integrity is crucial. Practical system advantages and recommended use The insert functions as part of a simple system comprising the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws; maintaining the complete set ensures reliable results. The rhombic plate shape, a corner radius of 0.4 mm and the 55° geometry suit both external turning and internal operations where access and tool orientation favour a 55° lead. Select the chipbreaker and grade according to the workpiece material, cutting parameters and machine stability to get the best trade-off between surface finish and productivity. Contact Metav Werkzeuge to reserve original Tungaloy DNGG 150404 TH10 indexable turning inserts for your next production run — for technical consultation or to request availability, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803209 Manufacturer SKU: TUN6803209 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Designation: DNGG150404 TH10 Facts Cutting angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole for fastening Uncoated cemented carbide material ISO-standard indexable insert Free clearance angle: 0° Sharp universal grade TH10 for non-ferrous materials System: insert + holder + shim/clamp set + replacement screws FAQ What materials is this insert suited for? The DNGG150404 TH10 Tungaloy indexable turning insert is optimised for non-ferrous materials; the uncoated TH10 grade promotes low cutting forces and clean surfaces when machining aluminium, brass and many polymers. How does the chipbreaker affect machining? The double-sided chipbreaker on the insert promotes consistent chip control and reduces the likelihood of chip entanglement, improving process reliability when using the DNGG150404 TH10 insert in turning operations. Is the insert compatible with standard holders? Yes — the insert follows ISO dimensions; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, so an ISO-compliant holder with the correct seat and clamp will accept the insert securely. What does the 0.4 mm corner radius mean for part finish? A 0.4 mm corner radius balances edge strength and surface finish: it supports good edge life while enabling a fine surface on finishing passes with appropriate feeds and speeds. Can this insert be used for internal turning? Yes, the rhombic geometry and 55° cutting angle make the insert suitable for both external and internal turning where access and tool orientation are appropriate for a rhombic insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp TH10 uncoated carbide grade and a versatile rhombic 55° geometry for efficient external and internal turning; the insert’s 0.4 mm corner radius and double-sided chipbreaker deliver controlled cutting and good surface finishes. Order directly via Metav Werkzeuge or consult our technical advisers for holder compatibility and optimisation. DNGG150404 TH10 indexable turning insert – rhombic 55° for turning DNGG150404 TH10 is a rhombic ISO indexable insert designed for external and internal turning where low cutting forces and clean surface quality are required ISO rhombic insert DNGG150404, 55° geometry TH10 uncoated cemented carbide grade 0.4 mm corner radius for controlled cutting Cylindrical hole, 4.76 mm thickness High-precision turning with proven cutting performance The rhombic 55° geometry and double-sided chipbreaker make this insert suitable for a wide range of turning tasks, especially where low cutting forces are important. The uncoated TH10 carbides provide a stable cutting edge that supports clean surface finishes on non-ferrous materials; in practice this reduces the need for downstream finishing operations. For those less familiar with insert terminology, a double-sided insert offers two usable cutting edges per side, effectively extending tool life and improving cost-efficiency in production. Reduced cutting forces and improved surface quality A small 0.4 mm corner radius balances edge strength with the ability to produce fine surface finishes; this is particularly effective in light to medium-duty turning. The absence of a coating on the cemented carbide grade means cutting forces remain low, which helps prevent workpiece distortion when machining thin-walled or delicate components. The result is consistent part geometry and fewer rejections, supporting reliable throughput in both short runs and serial production. Compatibility, handling and economical use The insert conforms to ISO dimensions and fits holders that match form, clearance angle, tolerance class, fastening style, size and thickness. The cylindrical hole and specified thickness of 4.76 mm ensure secure clamping in standard toolholders; correct holder selection is essential for repeatable performance. The design of the indexable system — insert plus holder, shim and fastening screw — keeps maintenance straightforward, minimises setup time and reduces overall tooling costs. For practical applications, the DNGG150404 TH10 is a sensible choice where versatility, simple edge geometry and predictable results are priorities. For advice on integrating Tungaloy turning inserts into production, compatibility checks with existing holders, or specification matching, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored technical support and ordering. Technical data Article number: 6803198 Manufacturer SKU: TUN6803198 SKU: 6803198-Tungaloy Dimensions & numbers Insert designation: DNGG150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 55° Clearance angle: 0° Materials & features Substrate: cemented carbide Grade: TH10 (uncoated) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non-ferrous materials and applications requiring low cutting forces; the DNGG150404 TH10 insert supports clean surface finishes on such workpieces. Can the insert be used for both external and internal turning? Yes, the rhombic 55° geometry and ISO form make the insert suitable for both external and internal turning operations when the correct holder and clamping are used. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker provides multiple effective cutting edges and consistent chip control, which prolongs usable edge life and contributes to steady process performance. What should be considered when selecting a compatible holder? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches these ISO parameters for secure clamping and repeatable results. Is the insert coated? The DNGG150404 TH10 is an uncoated cemented carbide insert; its uncoated edge reduces cutting forces and supports clean finishes for the intended material range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, GH110 wear-resistant grade and secure clamping to maintain a stable turning process; order the insert directly via Metav Werkzeuge or consult the team for application advice. DNGG150408 GH110 Tungaloy indexable insert for turning (rhombic, 55°) The DNGG150408 GH110 is an ISO‑compliant indexable carbide insert intended for external and internal turning operations, offering a rhombic form and a robust cutting edge. ISO-compliant rhombic geometry, 55° included angle GH110 grade for wear resistance and edge stability Double-sided chipbreaker for consistent chip control Central hole, cylindrical style for secure clamping Precise ISO geometry for predictable setup and repeatability The ISO-compliant rhombic shape with a 55° included angle provides a reliable cutting profile that simplifies holder selection and process planning. With a nominal insert size of 15 mm and a thickness of 4.76 mm, the geometry facilitates consistent engagement with the workpiece and predictable tool behaviour. Compatibility with standard toolholders is determined by form, relief angle, tolerance class, fastening and size; this standardisation reduces setup variance and supports repeatable production runs. Long tool life and stable cutting through the GH110 grade The chemical and microstructural optimisation of the GH110 grade delivers a balance of hardness and toughness that improves edge stability under typical turning loads. Manufactured in carbide, the grade is designed to resist abrasive wear while retaining sufficient fracture resistance for interrupted cuts. This results in extended usable life per edge and contributes to lower tool consumption over time, supporting cost‑effective machining where lifespan and consistent performance are priorities. Reliable chip control and secure mounting for surface quality A double-sided chipbreaker combined with a central cylindrical hole ensures controlled chip formation and positive clamping, reducing the risk of insert movement or vibration. The double-sided design doubles the number of available edges and aids heat dispersion, while the central hole style supports a secure mechanical engagement with many common ISO holders. As a result, finish quality is improved and the likelihood of chatter is diminished, producing surfaces that need less downstream finishing. Versatile application range with a pragmatic system approach Designed for turning, the insert is suitable for both external and internal turning when paired with the correct holder and chipbreaker variant; selecting the chipbreaker geometry and grade according to the workpiece material and machining conditions optimises productivity. The standard system setup comprises the indexable insert, a matching external holder or boring bar, a shim or clamping set and replacement screws, enabling straightforward maintenance and rapid edge changes on the shop floor. The compact rhombic form and 0° relief angle make the insert particularly useful where precise edge engagement and repeatable positioning are required. For processes that prioritise wear resistance and dependable chip control, contact Metav Werkzeuge for stock information and technical guidance—Metav Werkzeuge can advise on holder compatibility and delivery options; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6803210 SKU: 6803210-Tungaloy Manufacturer SKU: TUN6803210 Model series: ISO turning indexable inserts Designation: DNGG150408 Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 55° Relief angle: 0° Special features Shape: rhombic Central hole: cylindrical Chipbreaker: double-sided Grade/coating: GH110 Material: carbide Application: turning FAQ What materials is the insert suitable for? The GH110 grade insert is designed for a broad range of turning tasks; selection of the specific chipbreaker and cutting data should be matched to the workpiece material for best results. How is the insert clamped in the holder? The insert features a central cylindrical hole that allows secure mechanical clamping in compatible ISO holders and boring bars, ensuring stable fixation during turning. Can this insert be used for internal turning? Yes, the indexable geometry supports both external and internal turning when installed in an appropriate boring bar or internal holder with correct clearance. How many cutting edges are available per insert? The double-sided configuration provides multiple usable edges; use of both sides doubles edge availability compared with single-sided designs, extending service intervals. What does the GH110 designation mean for machining performance? The GH110 designation indicates a Tungaloy carbide grade optimised for a balance of wear resistance and toughness, improving edge life and stability in typical turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 NS520 Wendeplatten - Tungaloy
Benefit from the combination of the NS520 cermet grade, a 0.8 mm nose radius and the 55° rhombic geometry to achieve consistent finishing results and tight dimensional control; order directly via Metav Werkzeuge or consult the technical advisors for optimal integration into existing turning processes. DNGG150408 NS520 — DNGG 150408 cermet turning insert (55° rhombic) by Tungaloy The DNGG150408 NS520 is an ISO‑standard indexable turning insert designed for finishing to light machining of steel, optimised for surface quality and repeatable dimensional accuracy. Cermet grade NS520 for fine surface finishes Rhombic 55° geometry for versatile turning 0.8 mm nose radius for precise profiles Double-sided chipbreaker for uniform chips Achieving superior surface quality with a dedicated cermet grade The NS520 grade is a cermet or coated cermet formulation developed for finishing and light cutting of steel, where surface finish and dimensional accuracy are priorities. Its composition combines the hardness and wear resistance of ceramic phases with the toughness of metallic binders, which reduces micro‑chipping and promotes even wear across cutting edges. As a result, process stability is improved and the need for touch‑up operations is reduced, delivering measurable gains in productivity and part quality. Geometry and edge form engineered for reliable turning results A rhombic 55° geometry with a 0° clearance angle provides a balanced cutting approach suitable for both external and internal turning tasks. The 0.8 mm nose radius supports small‑radius profiling while maintaining strength at the tip, enabling consistent contouring and repeatable part tolerances. The insert’s cylindrical hole and ISO conformity mean compatibility with a wide range of standard holders, with secure clamping ensured by correct seating, tolerance class and attachment type. Process security and extended tool life through smart design Constructed from carbide with the NS520 surface characteristics, the insert combines wear resistance with an emphasis on fine finishes. The double‑sided chipbreaker promotes predictable chip formation and evacuation, which reduces risk of built‑up edge and contributes to longer tool life. Stable chip control and uniform flank wear lower the frequency of index changes, supporting continuous production and improved overall equipment effectiveness. Simple selection and integration for production environments As an ISO‑specified indexable insert, integration into existing tool systems is straightforward: match holder geometry, free angle and thickness to the insert’s form and dimensions. The insert is primarily intended for turning applications on steel and is best paired with a chipbreaker and grade chosen for component rigidity and cutting parameters. For tailored advice on holder compatibility or application‑specific recommendations, Metav Werkzeuge’s technical team provides selection support and specification checks. For precision finishing with Tungaloy’s NS520 cermet insert, contact Metav Werkzeuge for application advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6803211 Manufacturer SKU: TUN6803211 Internal SKU: 6803211-Tungaloy Article name: DNGG150408 NS520 Tungaloy-Wendeplatte Manufacturer: Tungaloy Material: carbide Model series: ISO-Drehwendeschneidplatten Facts Nose radius: 0.8 mm Insert geometry: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Hole: with cylindrical hole Special features Grade: NS520 (cermet / coated cermet) Shape: rhombic Application: Turning Chipbreaker: double-sided Compatibility: ISO-standard insert; holder compatibility determined by form, free angle, tolerance class, attachment, size and thickness FAQ Which materials is this insert intended for? The DNGG150408 NS520 indexable turning insert is designed primarily for finishing to light machining of steel, the NS520 cermet grade prioritising surface quality and even wear. What are the key geometric specifications of the insert? The insert has a rhombic 55° geometry, a 0.8 mm nose radius and a 0° clearance angle, offering a balance between profile precision and edge strength for turning tasks. Is the insert reversible or double-sided? This insert features a double-sided chipbreaker and is supplied with a cylindrical hole for secure mounting; the construction allows use of multiple cutting edges as per standard indexable insert practice. How is holder compatibility determined for this insert? Compatibility depends on the holder’s form, free angle, tolerance class, attachment method, size and thickness; the insert adheres to ISO dimensions to simplify selection of compatible external holders and boring bars. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6803211 and manufacturer SKU TUN6803211 identify the DNGG150408 NS520 indexable turning insert (Tungaloy) for procurement and stock management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision finishing, ISO compatibility and reliable clamping for consistent production results; order the insert directly via Metav Werkzeuge or consult our technical advisers for machining data and application support. DNGG150408 NS9530 Tungaloy indexable turning insert for turning, rhombic 55° DNGG150408 NS9530 is an ISO‑standard rhombic indexable insert designed for precision finishing in turning operations on steel. ISO rhombic insert DNGG150408 NS9530 cermet for finishing steel 0.8 mm corner radius for fine finishes Double-sided chipbreaker with central hole Precise finishing with a dedicated cermet grade The NS9530 grade is an uncoated cermet developed for finishing applications on steel, offering a sharp cutting edge, reduced cutting forces and excellent surface finish. As a finishing grade, it is optimised for continuous cuts and small depths of cut, which translates into a predictable part quality and reduced rework. The substrate is cemented carbide, ensuring a stable edge and consistent performance in typical turning tasks. Secure mounting and straightforward holder compatibility The insert follows ISO geometries, so compatibility with external holders or boring bars depends on form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic form combined with a cylindrical central hole and a double-sided chipbreaker gives a secure fit and repeatable seating, while the 0° clearance and 55° included angle support controlled chip flow and predictable contact conditions. These design choices simplify tool changeovers and help maintain process stability across shifts. Productivity gains through consistent surface quality By using a finishing‑specific grade and a 0.8 mm corner radius, shops gain faster sign‑off on finished components due to improved surface integrity and fewer manual finish operations. The insert is suitable for both external and internal turning; selecting the correct chipbreaker and grade according to workpiece material, machining type and machine stability will maximise tool life and minimise cycle times. Where process optimisation is required, pairing the insert with the appropriate holder and clamping parts in a matched system enhances repeatability and reduces downtime. For application-specific cutting data, availability or tailored advice on the Tungaloy DNGG150408 NS9530 indexable turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997798 Manufacturer SKU: TUN6997798 Model series: ISO indexable turning inserts Key dimensions Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 55° ISO code: 150408 Design and features Rhombic insert form Cylindrical central hole Double-sided chipbreaker Uncoated cermet grade NS9530 Cemented carbide substrate Suitable for external and internal turning FAQ What materials is this insert intended for? The NS9530 grade in the DNGG150408 insert is intended primarily for finishing on steel and delivers a fine surface finish with low cutting forces. Is the insert double sided and reversible? Yes, the insert features a double-sided chipbreaker, allowing the cutting edge to be reused by reversing the insert to its second side. How is the DNGG150408 mounted in the holder? Mounting relies on the cylindrical central hole and the ISO rhombic form; correct selection of the matching holder and clamping set ensures repeatable seating and secure clamping. Can the insert be used for internal turning (boring)? The cutting geometry and compact size make the insert suitable for internal turning when paired with an appropriate boring bar and stable setup. What advantages does the NS9530 cermet provide in production? NS9530 offers a sharp edge and consistent cutting behaviour for finishing, reducing manual finishing steps and supporting predictable part quality in continuous cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of a sharp uncoated cermet NS9530 finishing grade, a 0.8 mm nose radius and a rigid 4.76 mm plate thickness for consistently superior surface quality; the ISO DNGG150408 geometry with 55° cutting angle supports secure clamping and repeatable results. Order the insert directly via Metav Werkzeuge or consult our tooling advisers for application-specific recommendations. DNGG 150408 NS9530 Tungaloy — ISO turning insert, rhombic 55° The DNGG150408 NS9530 Tungaloy insert is an ISO rhombic finishing grade developed for external and internal turning, optimised to deliver high surface quality on steelwork. Uncoated cermet finishing grade NS9530 0.8 mm nose radius for high-quality surface Rhombic 55° geometry, with cylindrical hole 4.76 mm plate thickness for increased rigidity Fine finishing with low cutting forces and superior surface quality The insert’s NS9530 uncoated cermet composition and sharp cutting edge are engineered for finishing passes on steel, particularly where continuous cuts and small depths of cut are employed. The material choice produces low cutting forces, helping to reduce workpiece deformation and achieve improved surface integrity. As a consequence, machining sequences that demand tight tolerances benefit from a measurable improvement in finish without increasing process complexity. Stable clamping and geometry that support repeatable results The rhombic 55° geometry combined with a 4.76 mm thickness and a 0.8 mm nose radius delivers a balance of accessibility and stiffness. The insert’s cylindrical centre hole enables secure clamping in compatible holders, while the 0° clearance (relief) angle supports a predictable cutting action. These attributes together enhance repeatability in serial production and reduce the need for frequent readjustment, which is especially valuable in batch or lights-out operations. Seamless integration into ISO tooling systems for efficient setup Supplied as an ISO-series turning plate, the insert fits into standard indexable tooling systems when the holder’s form, clearance angle, tolerance class, fastening method, size and thickness correspond. The overall system typically comprises an ISO insert, an appropriate outer holder or boring bar, a shim/clamping set and replacement screws. The insert’s double-sided chipbreaker design allows economical indexing and longer on-machine life when the proper chip control and grade are selected for the workpiece and process stability. Efficiency gains and practical benefits on the shopfloor By choosing an optimised finishing grade such as NS9530 and the DNGG150408 form, machining cycles can be tailored to favour higher surface quality with modest feeds and shallow depths, reducing rework and downstream polishing. The combination of efficiency and consistent finish makes this insert suitable for precision components where dimensional fidelity and surface appearance are critical. Selecting the correct chipbreaker and ensuring a rigid setup will extend tool life and sustain productivity across repeat batches. For application advice, stock information or tailored tooling solutions for the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997802 SKU: 6997802-Tungaloy Manufacturer SKU: TUN6997802 Model series: ISO-Drehwendeschneidplatten ISO designation: DNGG150408 Label: DNGG150408 NS9530 Tungaloy-Wendeplatte Facts Size: 15 mm Thickness: 4.76 mm Nose radius: 0.8 mm Relief angle: 0° Cutting-edge angle: 55° Sides: double-sided Special features Rhombic plate form Uncoated cermet grade NS9530 Finishing grade for steel Cylindrical hole for secure clamping Double-sided chipbreaker Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness System: ISO insert, compatible holder, shim/clamping set, spare screws FAQ Which materials is this grade best suited for? The DNGG150408 NS9530 Tungaloy insert is a finishing grade optimised for steel; its uncoated cermet composition and sharp cutting edge are tailored for continuous cuts and small depths of cut to achieve high surface quality. Can the insert be used on both external and internal turning operations? Yes, the rhombic geometry and the ISO form make the plate appropriate for both external and internal turning when used with a compatible holder and a secure clamping arrangement. Is the plate indexable on both sides? The plate is double-sided with a chipbreaker on each side, allowing economical indexing and extending the usable life of the insert in typical turning applications. How does the 0.8 mm nose radius affect surface finish? A 0.8 mm nose radius supports finer surface finishes by smoothing tool marks at modest feeds; combined with the NS9530 grade it helps to reduce cutting forces and improve surface integrity in finishing passes. What determines whether this insert fits a specific holder? Fitment is governed by the ISO form, relief angle, tolerance class, hole style and plate thickness; the insert requires a holder compatible with the DNGG150408 geometry and the cylindrical hole for correct clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 NS9530 Wendeplatten - Tungaloy
Take advantage of the precise finishing performance of the NS9530 cermet grade combined with the stable rhombic 55° geometry and a 0.8 mm corner radius for consistent surface quality and low cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNGG150408 150408 NS9530 DNGG turning insert — Tungaloy, uncoated cermet, 55° DNGG150408 NS9530 is an ISO-format rhombic turning insert for finishing steel, optimised for continuous cuts and small depths of cut. Rhombic 55° geometry for versatile turning Uncoated cermet NS9530 for fine surface finish 0.8 mm corner radius for precise detail Double-sided chipbreaker, with cylindrical hole High-precision finishing with low cutting forces The insert is engineered as an uncoated cermet in grade NS9530, a finishing-grade substrate that combines a sharp cutting edge with reduced cutting forces. This composition improves stability during continuous turning and helps achieve a superior surface quality on steels. The material choice is particularly suited to operations requiring consistent finishes rather than heavy material removal; in practical terms, this means fewer reworks and shorter finishing cycles for production runs. Stable geometry and reliable seating for consistent results A defining mechanical characteristic is the rhombic 55° geometry, which provides a predictable cutting angle and good access to external and internal profiles. The insert features a 0.8 mm corner radius, supporting fine-detail machining without compromising edge strength. The insert is supplied in an ISO format that ensures compatibility with standard holders; correct fit depends on form, clearance angle, tolerance class, fixing method, size and thickness to guarantee repeatable clamping and accurate cutting performance. Optimised chip control and application scope Equipped with a double-sided chipbreaker and a cylindrical hole for secure fixing, the component supports controlled chip formation during finishing passes. The chipformer and grade selection are intended for steels processed with small depths of cut and continuous feed conditions; this reduces the likelihood of built-up edge and supports steady tool life. Where surface integrity and minimal cutting force are priorities, the combination of chip control and cermet edge geometry delivers measurable productivity gains. Practical selection and machining advice When selecting this insert for production, pair the insert with a suitable external holder or boring bar sized for ISO DNGG plates and verify the holder’s clearance and tolerance class. For finishing steel, apply moderate cutting speeds and consistent feeds to exploit the NS9530 grade’s advantage in surface finish. If a different workpiece material or heavier roughing passes are required, consider a different grade or geometry optimised for high removal rates rather than fine finishing. For tailored application support or to order DNGG150408 NS9530 inserts from Tungaloy, contact Metav Werkzeuge — specialists are available to advise on holder compatibility and cutting parameters Technical data Article number: 6997801 Manufacturer SKU: TUN6997801 Brand: Tungaloy ISO designation: DNGG150408 Model series: ISO turning inserts Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Approach angle: 55° Clearance (free) angle: 0° Hole style: cylindrical Chipbreaker: double-sided Special features Uncoated cermet grade NS9530 Carbide substrate Rhombic insert shape ISO-format turning insert for finishing For continuous cuts and small depths of cut Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert intended for? The DNGG150408 NS9530 insert is designed primarily for finishing operations on steel; the NS9530 cermet grade is optimised for low cutting forces and high surface quality when turning steel. Can the insert be reversed or indexed? Yes, the insert is double-sided with a chipbreaker on both faces, allowing multiple usable edges before replacement; correct indexing depends on holder compatibility and secure seating. What does the NS9530 designation mean for machining? NS9530 denotes an uncoated cermet grade with a sharp cutting edge suited to finishing applications; it promotes fine surface finishes and is best used with continuous feed and small depths of cut. Which holders are compatible with ISO DNGG150408 inserts? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fixing method, size and insert thickness; choose holders specified for ISO DNGG-format plates to ensure accurate clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 TH10 Wendeplatten - Tungaloy
Benefit from the sharp uncoated TH10 carbide grade combined with a 55° rhombic geometry and a 0.8 mm corner radius for low cutting forces and fine surface finishes; the ISO design ensures predictable holder compatibility. Order the DNGG150408 TH10 turning insert through Metav Werkzeuge or consult our specialists for tailored application advice. DNGG150408 TH10 Tungaloy turning insert (ISO 150408), 55° rhombic, 0.8 mm corner radius The DNGG150408 TH10 is an ISO-standard indexable turning insert for external and internal turning, offering a sharp uncoated carbide grade optimised for non-ferrous materials and applications requiring low cutting forces and clean surfaces. ISO 150408 rhombic 55° geometry Uncoated carbide grade TH10 0.8 mm corner radius for fine finishes Double-sided chipbreaker, cylindrical hole Consistent cutting performance with low cutting forces The rhombic 55° geometry and the uncoated carbide TH10 grade deliver a combination designed to reduce cutting forces and improve surface quality during turning operations. With a 0.8 mm corner radius, the insert produces reliable finishes while limiting vibration when used in stable setups. The double-sided chipbreaker and cylindrical hole allow secure clamping and consistent chip control, which contributes directly to shorter cycle times and fewer rejects. This technical configuration is particularly advantageous where material removal must be efficient without compromising surface integrity. Predictable setup thanks to ISO conformity and measured dimensions As an ISO-compliant turning plate, compatibility with toolholders is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert’s nominal ISO 150408 designation and measured parameters — 15 mm inscribed circle and 4.76 mm plate thickness — simplify tool selection and replacement planning. The 0° clearance angle and rhombic form are standard in many holder systems, reducing setup variability and enabling predictable repeatability across batches. Clear, measurable specifications make integration into existing tool inventories straightforward and minimise downtime during tool changes. Application guidance for efficient, clean machining This grade is intended for turning where a sharp, uncoated edge supports low cutting forces and a clean surface — typically non-ferrous workpieces and applications sensitive to built-up edge. The uncoated carbide helps to avoid coating-related adhesion on soft materials, and the 0.8 mm radius offers a balance between edge strength and finish quality. The insert’s double-sided design increases cost-efficiency per cutting edge, while the cylindrical hole ensures stable fixing in compatible clamping systems. For optimal results, match the chipbreaker style and grade to the workpiece material, cutting parameters and machine stability; the right combination reduces tool wear and enhances productivity. For reliable, low-force turning with Tungaloy’s TH10 grade, contact Metav Werkzeuge for application recommendations and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6803213 Manufacturer SKU: TUN6803213 Metav SKU: 6803213-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.8 mm Geometry angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Inscribed circle: 15 mm Special features Material: carbide Grade: TH10 (uncoated) Chipbreaker: double-sided Hole: cylindrical hole Shape: rhombic Application: turning (external and internal) FAQ Is this insert suitable for internal turning as well as external turning? The DNGG150408 TH10 turning insert is designed for both external and internal turning; its rhombic 55° geometry and ISO designation permit use in compatible holders for either application. Which materials are recommended for the TH10 grade? Tungaloy’s TH10 uncoated carbide is optimised for non-ferrous materials and situations where a sharp edge and low cutting forces produce cleaner surfaces. How does the double-sided chipbreaker affect cost-efficiency? The double-sided chipbreaker doubles the usable cutting edges on the DNGG150408 TH10 insert, lowering cost per edge and improving overall economy in production runs. What dimensions are important when checking holder compatibility? Key dimensions for compatibility include the ISO code (150408), inscribed circle size (15 mm), plate thickness (4.76 mm), clearance angle (0°) and hole style (cylindrical hole); these determine correct clamping and seating. Can the uncoated TH10 grade reduce built-up edge on soft materials? Yes, the uncoated TH10 grade helps to limit adhesion and built-up edge on softer and non-ferrous materials, supporting improved surface finish and reduced cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, an uncoated TH10 carbide cutting edge and precise 55° geometry for reliable external and internal turning; order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and application advice. DNGG150408 TH10 DNGG (indexable insert) — Tungaloy — Turning, rhombic 55°, 0.8 mm DNGG150408 TH10 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering an uncoated carbide grade that supports low cutting forces and clean surface finishes. ISO‑standard DNGG rhombic form Uncoated TH10 carbide for low cutting forces 55° cutting angle with 0.8 mm corner radius Double-sided chipbreaker, with cylindrical hole Predictable geometry for consistent turning outcomes The insert’s rhombic form and defined 55° cutting angle deliver a balance between accessibility and rigidity for a wide range of turning tasks. Thanks to the ISO‑standard designation, the geometry is immediately recognisable and comparable across compatible tool holders. The 0.8 mm corner radius provides a controlled cutting edge that reduces vibration and supports a uniform surface finish, while the uncoated TH10 grade of carbide keeps cutting forces low where adhesion-prone materials would otherwise build up on a coated edge. These attributes make the insert a pragmatic choice when process reliability and surface quality are priorities. Seamless integration into common tool systems Designed for use with standard DNGG holders and compatible boring bars, this indexable insert features a cylindrical hole for secure clamping and a tolerance profile that matches common holder specifications. Compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness; the insert’s dimensions and mounting style simplify replacement and re-indexing. The double-sided design extends usable life by allowing indexing to the second cutting edge, reducing downtime and simplifying inventory management for production environments. Why uncoated TH10 carbide is advantageous for specific jobs The uncoated TH10 grade excels when machining non‑ferrous alloys and other materials where an uncoated edge promotes lower cutting forces and a cleaner surface. Without a coating layer, edge sharpness is preserved and adhesion-related build-up is less likely, which supports better part finish in sensitive applications. For workshops that prioritise minimal cutting resistance and easy chip flow, an uncoated carbide insert often outperforms coated alternatives in these niche scenarios. Practical guidance to maximise performance and tool life Select the chipbreaker and grade according to the workpiece material, machining type and machine stability; the double-sided chipbreaker on this insert assists controlled chip formation under a range of feeds. Ensure the holder matches the DNGG form and accommodates the insert thickness of 4.76 mm to maintain clamping integrity. Stability at the tool tip remains the most influential factor for tool life and surface result, so prefer rigid setups and adjust cutting parameters conservatively when trialling a new insert geometry. Regular inspection of the cutting edge and prompt reindexing when wear appears will keep productivity high. For precise turning with Tungaloy’s TH10 grade, contact Metav Werkzeuge for part TUN6803221 and tailored holder recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6803221 Manufacturer SKU: TUN6803221 SKU: 6803221-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: Carbide (uncoated TH10) Measurements Corner radius: 0.8 mm Insert thickness: 4.76 mm Insert size (inscribed circle): 15 mm Cutting angle: 55° Clearance angle: 0° Special features Rhombic form Double-sided chipbreaker Cylindrical hole ISO designation: 150408 Uncoated TH10 carbide Application: Turning Compatibility: determined by form, clearance angle, tolerance, attachment, size and thickness FAQ What materials is this insert best suited for? The DNGG150408 TH10 Tungaloy indexable insert is optimised for non‑ferrous materials and applications where an uncoated edge supports low cutting forces and a clean surface finish. Is the insert reversible and how many cutting edges are usable? The insert features a double‑sided chipbreaker and can be indexed to use the second cutting edge, extending the effective service life of each DNGG150408 TH10 insert (SKU 6803221-Tungaloy). Which tool holders are compatible with this geometry? Compatibility for this DNGG form depends on holder form, clearance angle (0°), tolerance class, attachment method, size and thickness; choose holders designed for DNGG 150408 inserts to ensure secure clamping. What are the key dimensions to check before ordering? Important dimensions are corner radius 0.8 mm, thickness 4.76 mm and insert size 15 mm; the ISO code is 150408 for clear cross‑reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150408 TH10 Wendeplatten - Tungaloy
Combine the uncoated TH10 performance with ISO compatibility and a robust double‑sided geometry for dependable turning operations; order the inserts via Metav Werkzeuge or consult our specialists for application advice. DNGG150408 TH10 DNGG turning insert for turning — Tungaloy DNGG150408 TH10 is an ISO‑standard indexable turning insert designed for general turning and fine finishing on non‑ferrous materials and applications that demand low cutting forces. ISO rhombic insert, 55° lead angle Uncoated TH10 carbide for low cutting forces Double‑sided geometry with cylindrical hole 15 mm size, 4.76 mm thickness, 0.8 mm radius Consistent ISO fit for faster tool changeovers The ISO conformity of this rhombic insert ensures predictable interchangeability between holders from different manufacturers, reducing tool change time and inventory complexity. Compatibility is determined by form, clearance angle, tolerance class, fastening and plate thickness; the DNGG150408 TH10 matches common external and internal turning toolholders, making integration into existing tool assemblies straightforward. Clear identification of form and dimensions supports reliable setup and repeatable process results. Sharp uncoated TH10 carbide for clean surfaces and low forces The uncoated TH10 grade is a sharp, universal carbide designed to produce low cutting forces and a clean surface finish, particularly on aluminium, brass and other non‑ferrous alloys. Uncoated carbide minimises built-up edge on soft materials and allows easier regrinding where applicable, translating into reduced machining vibrations and improved surface integrity. For operations prioritising minimal cutting resistance and superior finish, this grade delivers measurable productivity benefits. Geometry and dimensions that support stability and economy With a 55° approach angle, 0° clearance face and a rhombic form, the insert offers a balanced cutting action that favours general turning and light finishing cuts. The double‑sided design extends tool life by providing two indexed cutting edges per side, while the cylindrical hole and standard clamping interface deliver secure fastening and straightforward replacement. Key dimensions such as 15 mm overall size, 4.76 mm thickness and 0.8 mm corner radius help define chip flow and edge strength, contributing to consistent component quality and longer intervals between insert changes. Practical system considerations for workshop efficiency This insert forms part of a complete turning system: an ISO‑conforming insert, a matching external holder or boring bar, a backing/ clamping kit and replacement screws. Selecting the appropriate TH10 grade and chipbreaker geometry for the workpiece material and machining stability is essential; the double‑sided, uncoated configuration is especially suited to turning where low forces and good surface finish are priorities. Clear labelling and standardised geometry simplify stockkeeping and enable rapid process adjustments on the shop floor. Contact Metav Werkzeuge for application guidance and availability of genuine Tungaloy TH10 inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803216 Manufacturer SKU: TUN6803216 SKU: 6803216-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 55° Clearance angle: 0° Hole: with cylindrical hole Geometry: rhombic, double‑sided Special features Material: carbide (uncoated) Grade: TH10 Application: turning (external and internal) Chipbreaker: double‑sided System composition: insert + external holder/boring bar + backing/clamping kit + replacement screws Compatibility determined by shape, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? This insert with TH10 grade is optimised for non‑ferrous materials such as aluminium and brass and for applications that benefit from low cutting forces. Is the insert coated? The DNGG150408 TH10 insert is supplied uncoated; the uncoated carbide edge supports low cutting forces and clean surface finish on soft materials. How is the insert mounted in the toolholder? Mounting uses the standard ISO rhombic form and a cylindrical hole for clamping; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness. What are the key dimensions of the insert? Key dimensions are 15 mm plate size, 4.76 mm thickness and a 0.8 mm corner radius; the approach angle is 55° with a 0° clearance face. Can the insert be indexed to use multiple cutting edges? Yes, the double‑sided geometry provides multiple indexed cutting edges to extend usable life and improve cost efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150404 LX11 Wendeplatten - Tungaloy
Take advantage of the balanced combination of LX11 wear resistance and the 0.4 mm corner radius for consistent edge stability and predictable surface finish in turning operations; compatibility with ISO holders is ensured by the DNGN form, relief angle and plate dimensions. Order the DNGN150404 LX11 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNGN 150404 LX11 indexable turning insert – Tungaloy DNGN 150404 LX11 is an ISO-standard, rhombic indexable insert for turning, designed to provide a balanced mix of wear resistance and edge toughness for a wide range of turning tasks ISO DNGN 150404 form for standard holders LX11 Tungaloy grade for wear resistance 0.4 mm corner radius for precise finishing 55° rhombic shape for versatile turning Consistent edge life through material and geometry The DNGN150404 LX11 insert combines a Tungaloy carbide grade with a geometry optimised for turning, delivering a deliberate balance between wear resistance and toughness. This balance reduces the rate of flank wear under mixed cutting conditions and helps maintain a stable cutting edge over extended cycles, resulting in fewer tool changes and more predictable component quality. The LX11 grade is formulated to complement the plate geometry so that tool life and surface integrity are prioritised over aggressive, short-lived performance. Clear guidance on holder compatibility and system setup Compatibility with a holder is determined by the plate form, relief angle, tolerance class, clamping method, size and thickness. The rhombic DNGN form, specified as 150404, fits ISO-compatible external holders when the correct seat and clamp are used. The system typically consists of the ISO indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Correct matching of these elements ensures secure clamping and consistent cutting geometry during both external and internal turning operations. Machining behaviour: edge radius, relief and chip control The 0.4 mm corner radius gives a compromise between edge strength and surface finish: it supports light finishing cuts while offering increased resistance to minor interruptions. The insert is specified with a 0° relief angle, which defines the basic cutting geometry and must be considered when pairing the insert with holders and approaches. As supplied, the plate has no integrated chipbreaker; therefore, chip formation and evacuation must be managed through cutting parameters and suitable holder orientation to maintain process stability and safe chip flow. Application fit and practical benefits on the shop floor Designed for turning, these ISO indexable plates perform well in both external and internal operations where a reliable edge and reproducible results are required. The carbide construction and LX11 grade support productive machining across varied materials when the correct cutting data and clamping are applied. For production environments seeking steady component quality, the insert’s standard ISO form and dimensions simplify stocking and replacement, supporting faster tool changes and consistent production runs. For application-specific advice or to reserve the DNGN150404 LX11 from Tungaloy, contact Metav Werkzeuge for technical consultation and prompt handling — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6803222 Manufacturer SKU: TUN6803222 Seller SKU: 6803222-Tungaloy Facts Thickness: 4.76 mm Size (inscribed circle): 15 mm Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° ISO designation: 150404 Plate hole: without hole Special features Grade/coating: LX11 Cutting material: Tungaloy carbide Plate form: rhombic Intended application: turning Chipbreaker: without FAQ What holders are compatible with this DNGN-form insert? Compatibility is based on the ISO DNGN form, relief angle, plate thickness and clamp style; holders designed for ISO DNGN 150404 inserts will accept the DNGN150404 LX11 Tungaloy insert when matched by seat and clamp. Which materials suit the LX11 grade best? The LX11 carbide grade of the DNGN150404 insert is formulated to balance wear resistance and edge toughness, making it appropriate for a broad spectrum of turning tasks when matched to suitable cutting data and stability conditions. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius strengthens the cutting edge and supports good surface integrity in finishing passes while maintaining resistance to minor interruptions. Is a chipbreaker included on this plate? This plate is supplied without a chipbreaker; chip control must be achieved through cutting parameters, holder geometry and toolpath strategy. What should be checked before installation? Verify the holder seat, clamp clearance, plate thickness (4.76 mm) and the ISO DNGN seat dimensions to ensure correct registration and clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150408 LX10 Wendeplatten - Tungaloy
The combination of high wear resistance and consistent edge stability ensures reliable, productive turning operations; compatibility with ISO holders reduces setup time. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application guidance. DNGN150408 LX10 — indexable turning insert for turning, 55° rhombic, Tungaloy The DNGN150408 LX10 is an ISO‑standard rhombic indexable insert intended for external and internal turning, engineered to balance wear resistance and cutting-edge stability for robust production machining. ISO‑standard rhombic insert, 55° cutting angle Tungaloy LX10 grade for wear resistance and toughness 0.8 mm corner radius for controlled edge strength 4.76 mm plate thickness for secure clamping No chipbreaker design for flexible application Improve productivity with a robust cutting geometry The indexable insert delivers a predictable cutting performance through its 55° cutting geometry and 0.8 mm corner radius, which together provide a compromise between edge strength and form accuracy. The geometry is tailored for both finishing and medium‑duty roughing when process stability is sufficient; the modest corner radius reduces the risk of built‑up edge and helps maintain repeatable surface quality. As an ISO‑standard component, the insert contributes to shorter changeover times and consistent results across compatible toolholders. Clear guidance on holder compatibility and mounting Compatibility with toolholders is governed by the insert shape, clearance angle (0°), tolerance class, fastening method, size and thickness. The rhombic form and 4.76 mm plate thickness ensure positive clamping in appropriately matched external holders or boring bars. The absence of a mounting hole means clamping relies on the boss and screw system of the holder; secure clamping reduces vibration and supports tool life, while correct torque and seat cleanliness are essential to achieve the rated performance. LX10 carbide grade explained for reliable tool life The LX10 designation denotes Tungaloy’s carbide grade, formulated to offer a balance of wear resistance and toughness suitable for general turning tasks. The cemented carbide composition provides thermal stability and a durable cutting edge under typical production feeds and speeds. Selecting LX10 complements the insert geometry where moderate cutting forces and interrupted cuts are encountered; the grade aims to reduce flank wear while maintaining a stable cutting edge for repeatable component quality. Practical machining recommendations and selection criteria For best results, choose a chipbreaker and grade that match the workpiece material, machining method and machine rigidity; this insert is supplied without a chipbreaker, offering flexibility when customised chip control is required. Where heavy interruption or unstable setups occur, a larger corner radius and a more tolerant holder arrangement are advisable. In batch production, pairing the insert with a holder that provides strong support and minimal overhang will help to extend tool life and maintain surface finish consistency. For reliable turning performance with Tungaloy’s LX10 grade, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6852045 SKU: 6852045-Tungaloy Manufacturer SKU: TUN6852045 Name: DNGN150408 LX10 Tungaloy indexable insert Facts Cutting angle: 55° Corner radius: 0.8 mm Plate size: 15 mm Plate thickness: 4.76 mm Relief/clearance angle: 0° Special features ISO‑standard rhombic shape (DNGN) Grade LX10, Tungaloy carbide No hole design No chipbreaker fitted Intended application: turning Model series: ISO turning indexable inserts FAQ What is the primary application for this insert? The insert is designed for turning operations; the DNGN150408 LX10 indexable insert (SKU 6852045-Tungaloy) suits both external and internal turning where the geometry and grade match the process. How does the 0° clearance angle affect use? A 0° clearance angle offers a specific cutting orientation that must be matched by the toolholder and setup; correct matching ensures proper rake and chip flow for the intended turning task. Is there a chipbreaker on the insert? This grade is supplied without a chipbreaker, allowing the choice of holder and external chip control measures to be adapted to the workpiece and machining strategy. Which materials is the LX10 grade suitable for? The LX10 carbide grade is formulated to balance wear resistance and toughness for a broad range of turning tasks; selection should be based on workpiece material, feed, speed and stability requirements. How should the insert be clamped? Secure clamping in an ISO‑compatible holder with the correct seat and screw torque is essential; the absence of a hole means the clamping relies on the holder’s boss and screw system and on a precise seat. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150408 LX11 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy LX11 wear resistance, a rhombic 55° geometry and a 0.8 mm corner radius for stable, repeatable turning operations; order via Metav Werkzeuge or consult our specialists for application matching. DNGN 150408 LX11 Tungaloy Turning Insert (Rhombic 55°, 0.8 mm radius) A DNGN150408 LX11 Tungaloy insert designed for ISO‑compliant external and internal turning, offering a balance of wear resistance and edge stability for productive metalcutting. ISO 55° rhombic geometry Tungaloy LX11 for wear resistance 0.8 mm corner radius for finishing Suitable for external and internal turning Reliable cutting performance for higher throughput The rhombic 55° geometry coupled with the Tungaloy LX11 grade provides a predictable cutting behaviour that supports consistent cycle times and reduced rework. As an ISO‑standard insert, the component integrates with a wide range of holder systems; compatibility depends on form, clearance angle, tolerance class, mounting style, size and thickness. The carbide substrate delivers a robust combination of wear resistance and toughness, translating into longer tool life under typical turning conditions and fewer interruptions for index changes. Precise edge control for improved surface quality A 0.8 mm corner radius is suited to finishing passes and light semi‑finishing, helping to lower the risk of built‑up edge and improving surface finish on turned parts. The insert’s geometry and edge stability reduce vibration sensitivity where machine and setup stiffness are adequate, enabling higher feed consistency and predictable dimensional results. For customers aiming to balance productivity and component quality, the insert supports repeatable turning outcomes when paired with the correct holder and clamping system. System integration and practical benefits at the machine This ISO insert is intended to be used as part of a system: matching insert, external holder or boring bar, clamp/locating pad and replacement screws ensures secure seating and correct cutting angles. The absence of a chipbreaker means the selection of cutting parameters and, where required, an appropriate chip‑control geometry are important to achieve optimal chip formation across different workpiece materials. Clear labelling by ISO code simplifies tool management and reduces downtime during index changes, supporting efficient shopfloor logistics and quicker set‑ups. Material adaptability and application guidance The LX11 grade is engineered to balance hardness and edge toughness, making it suitable for a broad range of turning tasks where tool life and edge stability matter. While the insert is described for turning, tool life and surface integrity will depend on the chosen cutting data and machine stability; selecting the correct chipbreaker and grade for the workpiece material and operation remains essential. Where uncertainty exists about the best combination of insert grade, geometry and cutting parameters, technical consultation can help align the insert choice with production goals and material characteristics. For application advice or to check suitability and availability of this Tungaloy LX11 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a detailed consultation and swift order processing. Technical data Article number: 6803223 Manufacturer SKU: TUN6803223 Designation: DNGN150408 LX11 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 15 mm Geometry angle: 55° Clearance (relief) angle: 0° Hole: without hole Special features Rhombic plate form Carbide substrate No chipbreaker ISO‑standard turning insert Intended for external and internal turning Compatibility determined by form, clearance angle, tolerance class, mounting, size and thickness FAQ What materials is this insert suited for? The DNGN150408 LX11 insert is a carbide grade designed for a wide range of turning applications; final suitability depends on workpiece material, cutting data and chosen chip control geometry. Is the insert compatible with my existing holder? Compatibility is determined by ISO form, free angle, tolerance class, mounting and plate size; the DNGN150408 follows ISO standards and fits holders made for the corresponding insert type and dimensions. Does the insert include a chipbreaker? This specification lists the insert as without a chipbreaker; chip control should be achieved through process parameters or by selecting a matching chipbreaker variant where required. What benefits does the LX11 grade provide? The LX11 grade offers a balance of wear resistance, toughness and edge stability, which helps to extend tool life and maintain consistent surface quality in turning operations. How should the 0.8 mm corner radius be used? A 0.8 mm radius is most effective for finishing and light semi‑finishing passes where improved surface finish and reduced edge stress are desired; correct feeds and speeds are essential to exploit this advantage. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150412 FX105 Wendeplatten - Tungaloy
Take advantage of the FX105 cutting-grade and the ISO rhombic geometry for dependable turning performance; the combination of a 1.2 mm nose radius and a 55° cutting angle provides a balance of precision and edge stability for external and internal turning. Order directly via Metav Werkzeuge or consult our technical team for application guidance. DNGN 150412 FX105 ISO turning insert, rhombic 55° – Tungaloy The DNGN 150412 FX105 is an ISO rhombic indexable insert designed for robust external and internal turning operations in production and toolroom environments ISO 150412 rhombic insert, 55° cutting angle FX105 Tungaloy grade for wear resistance 1.2 mm nose radius for accurate profiling Suitable for external and internal turning High-performance grade and material for consistent cutting The FX105 grade from Tungaloy is formulated to extend tool life through a controlled balance of wear resistance and toughness. Manufactured from sintered carbide, this insert delivers a reliable cutting edge for routine and demanding turning tasks. The result is predictable tool behaviour, fewer tool changes and stable output in serial production, which supports efficiency targets and reduces process interruptions. Geometry and system compatibility that support stable machining Built to the ISO 150412 form, the insert’s 55° cutting angle and 1.2 mm nose radius give a compromise between surface finish and edge robustness; the 4.76 mm thickness contributes to clamping stability in conventional holders. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied without a chipbreaker, so chip control is achieved by selecting the appropriate grade and chipformer in the tool system. Practical application and selection guidance for production This rhombic insert is intended for general turning tasks where repeatability and stable edge life are required. Use the insert as part of a system comprising a matching external holder or boring bar, an underlay/clip set and replacement screws to ensure correct seating and repeatable clamping force. For best results in series machining, pair the FX105 grade with a holder and process parameters that match workpiece material, required finish and machine rigidity to achieve consistent productivity and surface integrity. For application-specific recommendations on the Tungaloy FX105 insert and to ensure the correct ISO 150412 specification for production needs, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support. Technical Data Article number: 6803224 Manufacturer SKU: TUN6803224 SKU: 6803224-Tungaloy Model series: ISO indexable turning inserts Label: DNGN150412 FX105 Tungaloy insert Manufacturer: Tungaloy Facts Cutting angle: 55° Nose radius: 1.2 mm Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Plate shape: rhombic Hole: no hole Special features Material: carbide Grade: FX105 (Tungaloy) Application: turning Chipbreaker: none ISO designation: 150412 Typical system: insert + external holder/boring bar + underlay/clip set + screws FAQ What materials is this insert designed to machine? The DNGN150412 FX105 Tungaloy insert is designed for general turning applications; the FX105 grade offers a balance of wear resistance and toughness suitable for a broad range of steels and mixed production tasks. How does the 1.2 mm nose radius affect surface finish and strength? A 1.2 mm nose radius provides improved surface finish while maintaining edge stability for the DNGN150412 FX105 Tungaloy insert; larger radii increase strength and finish, smaller radii improve profile detail. Is a chipbreaker included with the insert? The DNGN150412 FX105 insert is supplied without a chipbreaker; chip control is achieved by selecting a suitable chipformer or holder geometry together with the FX105 grade. Which ISO form and angle should be considered when selecting a holder? Select a holder compatible with ISO 150412 geometry and a 55° cutting angle to ensure correct seating and clamping for the DNGN150412 FX105 Tungaloy insert. What components complete the cutting system for reliable clamping? A complete system typically includes the insert, a matching external holder or boring bar, an underlay/clip set and replacement screws to secure repeatable clamping and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150416 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of the FX105 wear-resistant grade, a corner radius of 1.6 mm and the ISO-standard rhombic 55° geometry for more stable cutting and longer tool life; order the insert directly via Metav Werkzeuge or consult the specialists for application guidance. DNGN150416 FX105 ISO turning indexable insert — rhombic 55°, radius 1.6 mm (Tungaloy) DNGN150416 FX105 is an ISO-standard indexable insert for turning, designed for both external and internal turning where a balance of wear resistance and edge stability is required ISO-standard rhombic 55° geometry FX105 grade for wear and edge stability Corner radius 1.6 mm for robust cutting edge Carbide body, 4.76 mm plate thickness Durable grade that extends productive cutting time The insert is supplied in Tungaloy's FX105 grade, a carbide-based specification that combines wear resistance with sufficient toughness to maintain a sharp cutting edge under industrial turning loads. This balance reduces tool changes and supports a steady production flow, translating into improved process efficiency. The grade complements the insert geometry to ensure stable chip formation, helping to avoid unexpected interruptions and lowering overall machining costs without compromising surface quality. Versatile ISO geometry for external and internal turning The rhombic 55° form with a 0° relief angle makes this insert suitable for a wide range of turning tasks, from profiling to shoulder cuts. Compatibility with a toolholder is determined by form, relief angle, tolerance class, clamping method, size and thickness, so matching the ISO code 150416 to the holder is essential for secure seating and consistent results. The insert's compact dimensions (15 mm size, 4.76 mm thickness) enable use in tight setups while the moderate corner radius 1.6 mm contributes to a stronger edge and improved workpiece finish when cutting under the right stability conditions. System-ready design for efficient shop-floor handling The component is intended to be used as part of a complete turning system: an ISO insert, a matching external holder or boring bar, underlay/shim and clamp set plus spare screws where required. Supplied without a chipbreaker, the insert allows process engineers to select the most suitable chip control geometry for the workpiece and rigidity of the set-up. Quick replacement and clear ISO coding simplify inventory management and reduce downtime. For application-specific advice or to verify holder compatibility, Metav Werkzeuge provides technical consultation and machining recommendations. For tailored machining recommendations or to secure stock of the Tungaloy DNGN150416 FX105 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and reference SKU TUN6803226. Technical Data Article number: 6803226 Manufacturer SKU: TUN6803226 Model series: ISO turning indexable inserts Name: DNGN150416 FX105 Tungaloy indexable insert Facts Corner radius: 1.6 mm Plate size: 15 mm Plate thickness: 4.76 mm Included angle: 55° Relief angle: 0° Special features Grade: FX105 Material: carbide Insert shape: rhombic Hole style: without hole Chipbreaker: without Application: turning ISO designation: 150416 FAQ Which machining operations is this insert intended for? The insert is designed for external and internal turning operations and is supplied as an ISO-standard turning insert for use in suitable holders. What does the FX105 grade indicate? FX105 is a Tungaloy carbide grade that prioritises wear resistance and edge stability to deliver consistent cutting performance in turning applications. How is compatibility with a holder checked? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; matching the ISO code 150416 to the holder specification ensures correct seating. Why is the corner radius important? A corner radius of 1.6 mm increases edge strength and improves surface finish under stable cutting conditions while supporting heavier cuts than a finer radius would allow. Is a chipbreaker supplied with the insert? This variant is supplied without a chipbreaker, allowing the selection of a chip control solution appropriate to the workpiece material and setup rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150708 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a balanced LX10 carbide grade and a compact 55° geometry to keep turning operations productive and predictable; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DNGN 150708 LX10 indexable turning insert for turning — Tungaloy The DNGN150708 LX10 is an ISO‑standard rhomboid indexable insert designed for external and internal turning, offering a balanced mix of wear resistance and edge stability for industrial machining. ISO‑standard rhomboid insert Balanced LX10 grade for wear resistance 0.8 mm corner radius for versatile profiles 55° cutting angle for robust turning Improved productivity through standardisation and grade selection The ISO conformity of this insert ensures quick replacement and predictable performance in serial production. The LX10 grade from Tungaloy combines wear resistance with sufficient toughness, reducing unplanned tool changes and stabilising cycle times. With a regular form factor and standard tolerances, the insert integrates into common tool systems so that setup errors are minimised and process repeatability is improved. This rational benefit supports leaner workflows and lower downtime in machining centres. Geometry tailored for consistent cutting and surface quality A rhomboid plate with a 55° cutting geometry and a 0.8 mm corner radius delivers a reliable compromise between strength at the cutting edge and the ability to produce medium‑sized profiles. The 15 mm size and 7.94 mm thickness contribute to rigidity in the clamped assembly, while the absence of a chipbreaker means the insert is best paired with an appropriate chip control solution for the specific workpiece material. The defined clearance angle of 0° influences how cutting forces are transmitted to the holder; when selected correctly, this leads to stable cutting and consistent surface finish. System compatibility and practical handling in workshops Compatibility with the holder depends on shape, clearance angle, tolerance class, fastening method, size and thickness; therefore the insert is part of a system that includes a suitable external holder or boring bar, a shim/clamping set and replacement screws. The carbide construction provides high hardness at cutting edges, while the LX10 composition improves edge retention under mixed cutting conditions. For best results, match the grade and any chip‑forming geometry to the workpiece and machining strategy; if unsure, consult the technical specifications or seek advice before production runs. Contact Metav Werkzeuge for application advice and ordering of the Tungaloy DNGN 150708 LX10 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6852066 Manufacturer SKU: TUN6852066 Shop SKU: 6852066-Tungaloy Core specifications ISO code: 150708 Size: 15 mm Thickness: 7.94 mm Corner radius: 0.8 mm Cutting angle: 55° Special features Material: carbide Grade: LX10 (Tungaloy) Shape: rhomboid Hole: none Chipformer: none Intended application: external and internal turning FAQ Is this insert compatible with standard ISO turning holders? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the DNGN 150708 LX10 insert fits ISO‑standard holders that match these parameters. What does the LX10 grade offer for turning applications? The LX10 Tungaloy grade provides a balanced combination of wear resistance, toughness and cutting edge stability, making it suitable for a wide range of turning tasks when paired with an appropriate chip control solution. Does the insert include a chipbreaker? No, the DNGN 150708 LX10 insert is supplied without a chipbreaker; chip control should be achieved via the chosen holder or process parameters. When is a 0.8 mm corner radius recommended? A 0.8 mm corner radius favours medium finishing and semi‑roughing passes, improving edge strength compared with smaller radii while still allowing acceptable profile detail. How is the insert supplied within a tool system? The system typically comprises the ISO‑standard insert plus a suitable external holder or boring bar, shim/clamping set and replacement screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150708 LX11 Wendeplatten - Tungaloy
The combination of wear-resistant LX11 grade, stable cutting edge and ISO compatibility delivers consistent performance and predictable tool life; ideal for productive turning operations. Order the DNGN150708 LX11 insert via Metav Werkzeuge or consult our specialists for application-specific setup. DNGN 150708 LX11 – turning insert (ISO turning insert) by Tungaloy, rhombic 55° geometry DNGN150708 LX11 is an ISO‑standard indexable insert designed for versatile external and internal turning, offering a robust cutting edge and grade selection for demanding machining tasks ISO-compliant rhombic geometry LX11 grade for wear resistance 55° cutting angle for versatile turning 0.8 mm nose radius for balanced strength and finish Prolonged tool life through carbide grade and edge stability The LX11 grade, developed by Tungaloy, combines wear resistance and toughness to give a reliable cutting edge under varied conditions. Using a carbide substrate ensures thermal stability and abrasion resistance, which reduces flank wear and extends indexable insert intervals. This resilience translates into fewer interruptions for plate changes and predictable repeatability in batch production. Operators benefit from steadier surface quality and longer service cycles when the grade is matched to the workpiece material and machining stability. Accurate geometry and ISO compatibility for consistent results The ISO-standard designation 150708 and the rhombic plate shape with a 55° cutting angle make the insert suited to a wide range of turning operations where approach angle flexibility and controlled cutting forces matter. A 0.8 mm nose radius balances edge strength with surface finish capability: larger radii improve robustness, while smaller radii favour fine finishing. Compatibility with holders depends on plate form, 0° relief angle, tolerance class, fastening method, size and thickness; this standardised approach simplifies assembly and secures repeatable clamping accuracy across tool changes. System setup and practical machining guidance for productivity A productive turning system comprises the ISO insert, a matched external holder or boring bar, a shim/clamping set and replacement screws. The supplied plate is delivered without a chipbreaker, so selecting an appropriate chipbreaker and insert variant for the workpiece material, feed rate and rigidity is essential. Correct pairing reduces vibration and improves chip control, supporting safer, faster cycles. Clear identification of the insert by ISO code and manufacturer SKU helps to maintain spares management and minimise downtime during tool changes. For tailored machining advice on the Tungaloy LX11 grade and to confirm the correct ISO turning insert and compatible holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803228 Manufacturer SKU: TUN6803228 Our SKU: 6803228-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNGN150708 LX11 Tungaloy-Wendeplatte Core specifications Size: 15 mm Thickness: 7.94 mm Nose radius: 0.8 mm Relief angle: 0° Cutting angle: 55° Material: Carbide Grade: LX11 Hole: without hole Design and features Rhombic plate shape ISO designation: 150708 Chipbreaker: none Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness System components: ISO insert, suitable external holder or boring bar, shim/clamping set and replacement screws FAQ What is this insert used for? The DNGN150708 LX11 insert is intended for external and internal turning operations where a rhombic geometry and robust edge life are required. Which holder features are required for fitting this insert? Compatibility depends on the holder form, relief angle, tolerance class, fastening method, size and thickness; confirm these parameters against the DNGN150708 ISO designation before mounting. Does the plate include a chipbreaker? This DNGN150708 LX11 plate is supplied without a chipbreaker; choose a chipbreaker and grade matched to the workpiece material and machining stability for optimal chip control. What benefits does the LX11 grade provide? The LX11 grade from Tungaloy offers a balance of wear resistance and edge stability, improving tool life and surface quality under a range of cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150712 LX10 Wendeplatten - Tungaloy
Benefit from the combination of LX10 wear resistance, a stable corner radius 1.2 mm and the ISO‑compliant rhombic geometry for consistent turning performance; order the inserts directly via Metav Werkzeuge or request advice from our technical consultants. DNGN 150712 LX10 — Tungaloy indexable turning insert, 55° approach The DNGN150712 LX10 is an ISO‑standard rhombic indexable insert for external and internal turning, designed to provide reliable edge stability and broad workpiece coverage. ISO‑standard rhombic insert, 55° approach LX10 Tungaloy carbide grade for wear resistance Corner radius 1.2 mm for predictable chip control Consistent tool life through a specialised cutting grade The core advantage of the LX10 selection lies in its balance of wear resistance and toughness. The carbide substrate combined with the LX10 formulation delivers steady cutting-edge retention under typical turning loads, which translates into fewer index changes and more predictable cycle times. This targeted material choice supports applications where consistent dimensional results and reduced tool interventions matter, contributing to overall process efficiency and cost control. Geometry and fitting that simplify machine setup The rhombic form with a 55° approach angle and a 0° rake angle creates a flexible geometry for a wide range of turning tasks. The insert’s ISO designation ensures compatibility with holders when matching is performed by form, clearance angle, tolerance class, clamping method, size and thickness. With a plate thickness of 7.94 mm and a nominal size of 15 mm, the insert suits standardised external and internal turning fixtures and allows predictable cutting forces for stable machining. Measurable machining benefits and practical application notes A corner radius of 1.2 mm provides a compromise between edge strength and surface finish: it supports robust cutting with improved resistance to chipping while still enabling good surface quality on many steels and general-purpose materials. The insert is most effective when used with an appropriate chipbreaker and a matching clamping system; selecting the correct chip control geometry and cutting parameters will maximise tool life and surface integrity. For tailored recommendations, Metav Werkzeuge’s technical team can advise on grade and geometry combinations for specific turning tasks. For Tungaloy DNGN 150712 LX10 inserts and application guidance, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852068 Manufacturer SKU: TUN6852068 Vendor SKU: 6852068-Tungaloy Model series: ISO turning inserts Dimensions / core data Corner radius: 1.2 mm Size: 15 mm Thickness: 7.94 mm Approach angle: 55° Rake angle: 0° ISO designation: 150712 Materials & features Material: carbide Grade: LX10 (Tungaloy) Shape: rhombic Hole: without hole Application: turning Compatibility: dependent on holder form, clearance angle, tolerance class, clamping, size and thickness FAQ What holders are compatible with this rhombic insert? Compatibility depends on the holder geometry and clamping system; the DNGN150712 LX10 indexable insert fits ISO holders matched by form, clearance angle and size (SKU 6852068-Tungaloy). Which materials are suitable for the LX10 grade? The LX10 Tungaloy grade is formulated for broad workpiece coverage and performs well in general turning tasks where a balance of wear resistance and toughness is required; specific material recommendations depend on cutting conditions. How does the 1.2 mm corner radius affect the machining result? A 1.2 mm corner radius increases edge strength and reduces the risk of chipping while helping to achieve a consistent surface finish during turning operations with stable cutting parameters. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker; chip control should be selected according to workpiece material and the intended cutting strategy. What does the ISO designation 150712 indicate? The ISO code 150712 summarises the geometry and dimensions of the insert family, helping to ensure correct selection of matching holders and clamping components for standardised turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150712 LX11 Wendeplatten - Tungaloy
Benefit from the combination of the LX11 Tungaloy grade, a 1.2 mm corner radius and ISO‑compliant DNGN geometry for reliable edge life and stable cutting in turning operations. Order via Metav Werkzeuge or consult their technical advisors for application-specific recommendations. DNGN150712 LX11 Tungaloy turning insert — ISO indexable insert for external and internal turning, 55° DNGN150712 LX11 Tungaloy turning insert is an ISO‑compliant, rhombic 55° indexable insert designed for both external and internal turning; compatibility with holders is defined by form, clearance, tolerance class, clamping and thickness ISO‑compliant DNGN geometry, 55° cutting angle LX11 Tungaloy grade for wear resistance 1.2 mm corner radius for robust edge strength Carbide construction with 7.94 mm plate thickness Durable cutting performance for productive turning The LX11 Tungaloy grade, combined with a carbide substrate, provides a balanced mix of wear resistance and toughness that supports consistent performance in turning tasks. The 1.2 mm corner radius strengthens the cutting edge against chipping while maintaining acceptable surface finish, resulting in fewer indexings and reduced tool change frequency. As an indexable insert, the component allows rapid seat replacement in compatible holders, which contributes to higher machine uptime and a smoother production flow. Precise fit and repeatability thanks to ISO DNGN geometry The rhombic DNGN form follows ISO conventions, so compatibility with standard holders is predictable when form, clearance, tolerance class, clamping and thickness match. The 55° cutting angle and 0° clearance define the cutting kinematics and contact geometry; this leads to reliable chip formation and dimensional control when the correct holder and clamp torque are used. Specifying an ISO‑compliant plate reduces set‑up variability and simplifies tool inventory management across machines. Stable machining and manageable chip behaviour This insert is supplied without a chipbreaker, which permits tailoring of chip control to the workpiece and process by selecting a matching chipformer or alternative insert geometry. The LX11 grade supports stable cutting edges under varying loads, promoting predictable wear progression and consistent part quality. Where process stability is paramount, pairing the insert with a suitably rigid holder and optimised cutting parameters reduces vibration and fosters repeatable surface finishes. Practical scope and system considerations Designed for both external and internal turning, the insert forms part of a system that includes the ISO indexable insert, a matching external holder or boring bar, seating and clamping sets and replacement screws. The plate has a thickness of 7.94 mm and a nominal size of 15 mm, allowing use in compact toolholders as well as in more robust set‑ups. Selection of the correct chipbreaker, where required, and adherence to the holder manufacturer’s torque and seating recommendations will deliver the intended combination of productivity and tool life. For application advice or to order the DNGN150712 LX11 Tungaloy insert, contact Metav Werkzeuge for tailored recommendations and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803229 SKU: 6803229-Tungaloy Manufacturer SKU: TUN6803229 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 1.2 mm Cutting angle: 55° Clearance (relief) angle: 0° Plate thickness: 7.94 mm Plate size: 15 mm Special features Grade: LX11 (Tungaloy) Material: Carbide Shape: Rhombic Designation: DNGN150712 Hole: without hole Chipbreaker: none Application: turning (external and internal) ISO‑compliant indexable insert FAQ What turning applications suit this insert? The DNGN150712 LX11 Tungaloy insert is intended for both external and internal turning; its geometry and grade support stable general‑purpose turning where a robust edge and predictable wear are required. How does the LX11 grade affect performance? LX11 is a Tungaloy grade formulated to balance wear resistance and toughness; in the DNGN150712 this supports longer edge life and consistent cutting‑edge stability under typical turning loads. How is compatibility with holders ensured? Compatibility depends on matching the DNGN form, clearance angle, tolerance class, clamping method, size and thickness; the ISO‑compliant designation simplifies selection of suitable holders. Is chip control provided by the insert? This specific insert is supplied without a chipbreaker; chip control is achieved by selecting the appropriate chipformer, holder geometry or cutting parameters for the workpiece material and process. What are the key dimensions to check before ordering? Confirm the DNGN150712 geometry, 1.2 mm corner radius, plate thickness 7.94 mm and 55° cutting angle to ensure fit and intended cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNGN 150716 LX10 Wendeplatten - Tungaloy
Reliable ISO-standard performance with the LX10 grade carbide and a 1.6 mm corner radius delivers stable cutting and predictable toollife; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. DNGN 150716 LX10 – ISO turning insert (rhombic, 55°) by Tungaloy DNGN 150716 LX10 is an ISO-standard rhombic indexable insert designed for both external and internal turning applications, compatible with holders matching form, clearance and tolerance. ISO-standard rhombic insert, 55° included angle LX10 grade carbide for wear resistance 1.6 mm corner radius for stable cutting No hole, no chipbreaker for flexible mounting Consistent cutting performance and extended toollife The LX10 grade from Tungaloy is formulated to balance wear resistance and edge stability, which translates into longer intervals between indexings and predictable component dimensions. As an ISO-standard solution, the insert supports repeatable results in serial production, reducing machine downtime. The combination of carbide substrate and LX10 coating characteristics is intended to maintain a sharp cutting edge under mixed turning conditions, giving a reliable compromise between toughness and abrasion resistance. Secure clamping and interchangeability reduce setup time The rhombic geometry with a 55° included angle and 0° clearance angle offers a versatile approach to profile control and access in confined features. Compatibility with clamping systems is dictated by insert form, clearance angle, tolerance class, fastening and thickness, so holders specified to ISO dimensions will accept the plate without ad hoc modification. The indexable insert concept allows quick replacement of cutting edges, improving process security and simplifying tool inventory management across multiple lathes. Practical application guidance and material handling With a corner radius of 1.6 mm and a plate thickness of 7.94 mm, this insert is suited to operations where edge robustness and surface integrity matter; larger radii increase edge strength and help stabilise interrupted cuts. The supplied geometry is delivered without a chipbreaker and without a hole, enabling selection of an appropriate chip-control solution and mounting strategy for the specific workpiece material and machining conditions. For precise recommendations on holder pairing and cutting parameters, contact Metav Werkzeuge’s technical team for application-specific guidance. For process-critical turning tasks, specify the Tungaloy LX10 DNGN 150716 insert via Metav Werkzeuge and request application support from their technical specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6852071 Manufacturer SKU: TUN6852071 Label: DNGN150716 LX10 Tungaloy insert Model series: ISO turning inserts Material: Carbide Core data Shape: Rhombic Size: 15 mm Thickness: 7.94 mm Corner radius: 1.6 mm Included angle: 55° Clearance angle: 0° Hole: without hole Special features Grade: LX10 Chipbreaker: without chipbreaker Compatible with ISO-standard holders Intended use: Turning (external and internal) Indexable insert, ISO designation DNGN150716 FAQ Which turning operations are suitable for this insert? The DNGN 150716 LX10 Tungaloy insert (SKU 6852071-Tungaloy) is designed for both external and internal turning where a rhombic, 55° geometry is advantageous. What is the corner radius and how does it influence machining? The corner radius is 1.6 mm; a larger radius improves edge strength and part finish stability, making the insert suitable for operations where robustness and surface integrity are priorities. Is the insert compatible with ISO holders and how is compatibility ensured? Yes — the DNGN150716 conforms to ISO standards; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, so holders manufactured to ISO specifications will be compatible. Does this insert include a chipbreaker or mounting hole? The insert is supplied without a chipbreaker and without a hole, allowing selection of a chip-control geometry and mounting arrangement appropriate for the application. What material and grade does the insert use and what benefits does that provide? The insert is manufactured from carbide in Tungaloy’s LX10 grade, providing a balanced combination of wear resistance, toughness and edge stability suitable for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGN 150716 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, edge stability and proven ISO compatibility for reliable turning cycles; order directly via Metav Werkzeuge or consult our specialists for toolholder matching and process optimisation. DNGN150716 LX11 – Tungaloy turning insert (rhombic, 1.6 mm corner radius) DNGN150716 LX11 is an ISO rhombic carbide turning insert designed for external and internal turning applications, combining a balanced cutting grade with a robust geometry. High wear resistance LX11 grade 1.6 mm corner radius for improved edge strength ISO DNGN geometry for straightforward holder fit Carbide substrate for extended tool life Consistent cutting performance through a balanced grade The DNGN150716 LX11 insert pairs a carbide substrate with the LX11 grade to offer a carefully weighted combination of wear resistance and toughness. This balance reduces unplanned tool changes and supports steady component quality in continuous production. The grade is chosen to enhance edge stability, resulting in fewer micro‑chipping events and a more consistent surface finish when compared with softer alternatives. For production planners, this translates into predictable tool life and reduced variance in cycle times. Geometry engineered for secure clamping and accurate results The rhombic shape with an included angle of 55° and ISO designation ensures compatibility with standard DNGN toolholders; the 0° rake supports neutral cutting action where stability is critical. The insert dimensions—15 mm nominal size with a thickness of 7.94 mm—combine with the tolerance class and fixation type to determine fit; check holder form, clearance angle and screw type to guarantee secure clamping. This geometry is particularly effective where precise axial positioning and repeatable tool projection are essential for tight tolerances. Robust cutting edge and adaptable chip strategy A 1.6 mm corner radius increases edge strength and improves resistance to intermittent cutting forces, making the insert suitable for medium‑depth finishing and robust roughing passes where edge integrity matters. The current specification includes no integrally formed chipbreaker, so chip control should be matched to the workpiece material and cutting conditions via holder design or by selecting a compatible chipbreaker variant. Proper selection reduces built‑up edge formation and helps maintain consistent dimensional accuracy. Practical system considerations and production benefits The insert is supplied as an element of an ISO insert system comprising the plate, a matching external holder or boring bar, a clamping pad or set and spare fastening screws. This system approach simplifies inventory and replacement procedures on the shop floor. The combination of carbide construction and the LX11 grade supports productive machining by extending intervals between indexings and reducing downtime for insert changes, which contributes to improved overall equipment effectiveness in turning operations. Consult Metav Werkzeuge for tailored selection of Tungaloy LX11 inserts and matching holders; contact our specialists by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to determine the optimal setup for the application. Technical data Article number: 6803230 Manufacturer SKU: TUN6803230 Item name: DNGN150716 LX11 Tungaloy insert Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Included angle: 55° Rake angle: 0° Thickness: 7.94 mm Size: 15 mm Special features Material: carbide Grade: LX11 (Tungaloy) Plate form: rhombic Chipbreaker: none Hole: without hole Typical application: external and internal turning System components: insert, holder/boring bar, clamping pad, spare screws FAQ What applications suit this insert best? This insert is intended for external and internal turning; the combination of LX11 grade and carbide substrate makes it suitable for medium‑duty finishing and stable roughing where edge life and dimensional consistency are required. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases the cutting edge strength, improving resistance to edge chipping and supporting a better surface finish under varying cutting loads. Is a chipbreaker included with the insert? The insert is supplied without an integrated chipbreaker; chip control must be achieved via holder selection or by choosing an alternate insert geometry that includes a chipbreaker matched to the workpiece material. Which holders are compatible with this geometry? Compatibility depends on holder form, clearance angle, tolerance class, fixation method, size and thickness; match the ISO DNGN geometry and the insert thickness to the recommended external holder or boring bar for secure clamping. What information is useful when ordering replacements? Provide the item name DNGN150716 LX11, the manufacturer SKU TUN6803230 and the article number 6803230 to ensure correct replacement and avoid mismatches. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com