DNMG 110402 T6215 Wendeplatten - Tungaloy
For productive turning of stainless steels, the CVD-coated carbide T6215 grade and the double-sided chipbreaker deliver reliable wear resistance and consistent chip control; combine ISO compatibility and compact geometry for stable, efficient machining. Order the insert via Metav Werkzeuge or consult the technical team for matching holders and setup advice. DNMG110402 T6215 ISO turning insert by Tungaloy — CVD-coated carbide for stainless-steel turning A DNMG110402 T6215 insert designed for ISO-compliant external and internal turning applications, offering wear-resistant performance and controlled chip formation for stable to lightly interrupted cuts CVD-coated carbide grade T6215 Optimised for stainless steel turning Double-sided chipbreaker for reliable chips ISO DNMG110402, 55° rhombic geometry Proven wear resistance that extends tool life The combination of a CVD-coated surface and a carbide substrate provides enhanced wear resistance, which reduces flank wear during prolonged operation and minimises unexpected tool changes. In practice, the T6215 grade is formulated for machining stainless steels under stable to lightly interrupted conditions; this results in more consistent cycle times and a lower cost per component. The coated structure also supports stable chip formation, so the process remains predictable and easier to integrate into automated production sequences. ISO compatibility and mechanical stability for accurate turning ISO conformity ensures straightforward interchangeability with holders that accept DNMG inserts; compatibility depends on geometry, relief angle, tolerance class, fastening and plate thickness. The 55° rhombic geometry gives a versatile cutting edge for external and internal profiles, while the rhomboid form and with cylindrical hole locate and secure the insert reliably. A plate thickness of 4.76 mm and a 0° relief angle contribute to rigidity, reducing chatter and improving dimensional repeatability on the finished part. Practical chip control and surface-quality advantages The double-sided chipbreaker reliably shapes chips across a range of cutting parameters, improving chip control and reducing the risk of re-cutting or entanglement in the work area. The 0.2 mm corner radius supports fine finishing passes, producing a refined surface finish without excessive tool load. Select the chipbreaker variant and cutting parameters to match material grade and machine stability; pairing the insert with a properly specified holder and correct clamping ensures optimal thermal and mechanical conditions, promoting repeatable results across batches. Request matching holders or technical advice from Metav Werkzeuge to ensure optimal setup and performance for this Tungaloy DNMG110402 T6215 insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944580 Manufacturer SKU: TUN6944580 SKU: 6944580-Tungaloy Model series: ISO turning inserts ISO designation: DNMG110402 Facts Angle: 55° Plate size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Special features Carbide substrate, CVD coating Double-sided chipbreaker Rhombic plate form With cylindrical hole Grade T6215 for stainless steels Application: Turning FAQ Which materials is this insert suitable for? The Tungaloy DNMG110402 T6215 insert is optimised for machining stainless steels, offering wear-resistant performance under stable to lightly interrupted turning conditions. How does the DNMG110402 interface with holders? Compatibility is determined by the DNMG geometry, relief angle, tolerance class, fastening, size and thickness; the ISO-compliant form ensures a wide range of matching external holders and boring bars. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control and process security, producing consistent chips that support uninterrupted production and cleaner machine operation. What finish and edge preparation can be expected with a 0.2 mm radius? A 0.2 mm corner radius delivers a fine edge for improved surface finish and is suitable for light finishing passes; heavier roughing typically requires a larger radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade T6215 and a double‑sided chipbreaker to achieve stable, economical turning of stainless steel; order the DNMG110402 T6215 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for selection help. DNMG110402 T6215 — Tungaloy turning insert for external and internal turning, rhombic 55° The DNMG110402 T6215 is an ISO‑standard rhombic insert designed for reliable turning of stainless steel under stable to lightly interrupted cutting conditions CVD‑coated carbide grade T6215 Optimised for turning stainless steel Double‑sided chipbreaker for stability Rhombic 55° insert, 11 mm size Reliable wear resistance for consistent production The CVD‑coated carbide T6215 provides a high level of wear resistance, extending tool life during sustained turning operations. The coating and substrate combination is developed for the demands of stainless steel machining, delivering improved edge stability and predictable wear behaviour. With a double‑sided chipbreaker, the insert supports effective chip formation and evacuation, which reduces machining interruptions and contributes to a lower cost per cutting edge. The measured nose radius 0.2 mm ensures a balance between edge strength and surface finish when light finishing passes are required. Precise geometry for repeatable accuracy A rhombic 55° geometry and an 11 mm cutting size provide a versatile cutting angle for both facing and profiling tasks, while the 4.76 mm thickness gives robust support in the pocket. The insert’s cylindrical hole and tolerance‑compliant form mean proper seating and repeatable positioning in ISO‑compatible holders; compatibility is determined by the form, clearance (relief) angle, tolerance class, fastening and size. Correct seating reduces vibration and improves dimensional consistency, enabling predictable tool life and more reliable process control in production environments. Efficient machining and straightforward system integration As part of an ISO turning system, this insert works with a matching external holder or boring bar plus a shim/clamping set and replacement screws for quick maintenance. The double‑sided design is economical: each index provides another usable edge, cutting down tool change frequency. Effective chip control from the chipbreaker improves surface quality and reduces the risk of built‑up edge when machining stainless steel. For typical applications the system setup supports both external and internal turning, offering a practical solution for batch production and small series alike. For robust stainless‑steel turning choose Tungaloy’s T6215 grade — contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6966126 SKU: 6966126-Tungaloy Manufacturer SKU: TUN6966126 Model series: ISO turning indexable inserts Facts Geometry: Rhombic 55° Size: 11 mm Thickness: 4.76 mm Nose radius: 0.2 mm Relief angle: 0° Hole: cylindrical Special features Cutting grade: T6215 Cutting material: CVD‑coated carbide Chipbreaker: double‑sided Application: Turning (external and internal) Compatibility: ISO holders; depends on form, clearance, tolerance, fastening, size and thickness FAQ Which materials is this insert suitable for? The insert is designed primarily for stainless steel machining; the T6215 grade is a wear‑resistant CVD‑coated carbide optimised for rostfrei applications and stable cutting conditions. How many usable edges does the insert provide? With its double‑sided design the insert offers multiple index positions; the exact count depends on the holder and indexing method used with the rhombic DNMG110402 insert. What determines compatibility with a holder? Compatibility is defined by insert form, relief (clearance) angle, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for correct seating. Can the insert handle light interruptions in the cut? Yes, the T6215 grade and the insert’s geometry are suited to stable to lightly interrupted cutting; proper clamping and tool overhang management are recommended for best results. What is the nominal nose radius and relief angle? The nominal nose radius is 0.2 mm and the relief (frewinkel) is 0°, which provides a compromise between finish quality and edge robustness. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110402 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9215 grade for high wear resistance combined with breakage security and efficient chip control; the rhombic ISO form with a 0.2 mm corner radius delivers consistent surface finish in medium steel turning, while compatibility with standard ISO holders makes integration straightforward — order directly via Metav Werkzeuge or contact our consultants for detailed application advice. DNMG 110402 T9215 — Indexable turning insert for turning, Tungaloy DNMG110402 T9215 is an ISO-format indexable insert designed for external and internal turning in medium-steel applications, offering CVD-coated carbide performance and a double-sided chipbreaker for productive machining. CVD-coated grade T9215 for medium steel Rhombic ISO DNMG 110402 geometry Double-sided chipbreaker for stability 0.2 mm corner radius for fine surface finish Optimised cutting performance for productive turning The CVD-coated carbide composition of this insert combines wear resistance with fracture toughness to support sustained, productive turning cycles in medium steel. The T9215 grade is engineered to balance hardness and edge strength, allowing higher cutting parameters during continuous or lightly interrupted cuts. This results in improved throughput and longer edge life compared with uncoated or lower-grade substrates. The rhombic form factor and the double-sided chipbreaker help stabilise chip formation, reduce vibration and maintain a consistent contact zone between tool and workpiece, which contributes directly to repeatable part quality on the shop floor. Compatibility and system-level advantages ISO conformity ensures simple integration into existing tool systems: compatibility is governed by the insert form, relief or clearance angle, tolerance class, fastening method, size and thickness. The insert fits standard DNMG holders and can be mounted on a matching external holder or boring bar with the appropriate shim or clamp set and replacement screws. This system approach reduces setup complexity and inventory variety. Because the component is double-sided and includes a central cylindrical hole for positive clamping, the design promotes economical tool use through indexable edges and secure fixation, minimising downtime associated with insert changes. Practical benefits: surface finish, reliability and application scope A 0.2 mm corner radius supports improved surface finish and edge stability when machining reduced allowances or finishing passes. The 55° cutting angle and 0° relief angle suit a broad range of turning tasks, from roughing that demands chip control to finishing that requires dimensional consistency. The insert’s geometry and grade make it a dependable choice where consistent tool life and predictable performance are required. For workshops seeking reliable, repeatable results in external and internal turning of medium steel, this option delivers both the process security and the economic advantages associated with indexable tooling. For a practical assessment of whether the Tungaloy CVD-coated T9215 grade fits a specific turning application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machining parameters and availability. Technical data Article number: 6944637 Manufacturer SKU: TUN6944637 SKU: 6944637-Tungaloy Designation: DNMG110402 T9215 indexable insert Core specifications Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 55° Relief angle: 0° Special features Material: carbide, CVD-coated Grade: T9215 for medium steel Geometry: rhombic, double-sided chipbreaker Hole: cylindrical (with hole) Typical use: external and internal turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited to machine? The DNMG110402 T9215 insert is optimised for medium steel machining; the CVD-coated grade provides a balance of wear resistance and toughness for productive turning operations. How is the insert mounted and secured in the holder? The insert features a central cylindrical hole and is secured in compatible ISO DNMG holders using the appropriate clamp or shim set and replacement screws to ensure positive clamping. Can the insert be used for interrupted cuts? Yes; the T9215 grade is designed for continuous to lightly interrupted cutting, combining fracture resistance with wear performance for such conditions. How many cutting edges are available per insert? The rhombic, double-sided design provides multiple indexable edges; manufacturers’ handling instructions specify the exact number of usable edges per insert type. Does the geometry affect surface finish? Yes; the 0.2 mm corner radius and the rhombic form contribute to improved surface finish during finishing passes and support dimensional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide durability, stable chip control and ISO compatibility for reliable, high‑productivity turning; order genuine Tungaloy inserts via Metav Werkzeuge or request application advice from our specialists. DNMG 110402 T9215 DNMG110402 Tungaloy insert for turning (CVD‑coated carbide) The DNMG110402 T9215 is an ISO‑format indexable insert designed for external and internal turning, optimised for medium steel machining with a balance of wear resistance and fracture toughness ISO‑format rhombic insert DNMG110402, 55° cutting angle CVD‑coated carbide grade T9215 for mid‑steel Double‑sided chipbreaker with 0.2 mm nose radius Centred cylindrical hole, 4.76 mm thick, 11 mm size Durable coating and material for extended cutting intervals The combination of a CVD‑coated surface and carbide substrate in grade T9215 delivers pronounced wear resistance while retaining sufficient toughness to resist chipping under standard production loads. This material pairing is developed for medium steel applications and supports continuous to light interrupted cuts, so less frequent indexing and longer effective tool life are realistic outcomes. The coating reduces abrasive wear and helps maintain a consistent edge geometry, contributing to predictable process windows and fewer unexpected tool changes. ISO compatibility and secure clamping for consistent results Built to the ISO form DNMG110402, the insert’s rhombic geometry with a 55° approach angle and cylindrical hole enables secure location and repeatable clamping in matching external holders or boring bars. The 0° clearance angle and the defined tolerance class ensure that fit and positional accuracy are governed by holder geometry, fixation and thickness compatibility. With a 4.76 mm plate thickness and 11 mm size, the insert suits widely used ISO clamping concepts, simplifying inventory choices and reducing downtime caused by incorrect seat or fit issues. Stable chip control and predictable productivity benefits The double‑sided chipbreaker and modest 0.2 mm nose radius provide reliable chip control and surface finish in typical finishing and light roughing passes. This insert design supports a reversible use pattern and consistent edge performance across multiple indexes, helping to increase overall productivity and lower tooling consumption per component. Process reliability is further enhanced by the insert’s balanced resistance to flank wear and its fracture‑resistant core, which together contribute to longer intervals between interruptions for tool management and improved throughput on serial turning tasks. For high‑productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for supply and application guidance and to obtain genuine inserts for your production needs. Technical data Article number: 6782311 SKU: 6782311-Tungaloy Manufacturer SKU: TUN6782311 Model series: ISO‑Drehwendeschneidplatten Facts Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 11 mm Nose radius: 0.2 mm Clearance angle: 0° Special features Material: carbide Grade/coating: T9215, CVD‑coated carbide Plate form: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double‑sided Application: turning FAQ What holder compatibility is required for this insert? The DNMG110402 T9215 insert fits ISO‑format holders that match the DNMG110402 geometry; compatibility depends on holder form, clearance angle, tolerance class, fixation method, size and thickness. Is this insert suitable for interrupted cuts? The T9215 grade and the insert geometry are intended primarily for continuous to light interrupted cuts, providing a compromise of wear resistance and fracture toughness suitable for such conditions. How many usable cutting edges does the double‑sided design provide? The double‑sided chipbreaker design allows reversible indexing, providing two usable cutting edges per side as dictated by the insert and holder system. Which materials is this grade best suited for? The CVD‑coated T9215 grade is optimised for medium steel machining, offering good wear resistance with adequate toughness for productive turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a double-sided, rhombic 55° geometry to achieve stable chip control and long tool life in medium steel turning; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG110402 T9215 indexable turning insert for turning by Tungaloy A DNMG110402 T9215 indexable turning insert designed for external and internal turning in medium steel applications CVD-coated carbide grade T9215 Suitable for medium steel turning Rhombic 55° insert, 11 mm size Double-sided with cylindrical hole Deliver consistent productivity with robust CVD-coated carbide The CVD-coated carbide grade offers a balance of high wear resistance and fracture toughness that supports sustained production runs. The coating reduces flank and crater wear under continuous and slightly interrupted cuts, translating into fewer indexings and more uptime. For machining workshops seeking predictable tool life, this insert provides a measurable improvement in process stability and reduces the frequency of tool changes. Optimised geometry for chip control and surface quality The rhombic 55° geometry and the integrated double-sided chipbreaker deliver effective chip evacuation and reduced cutting forces during turning. The 0° clearance and the 0.2 mm corner radius give a compromise between edge strength and finish capability, enabling a fine surface on shafting and turned components. These geometric choices make the insert particularly suitable where consistent surface quality and repeatable dimensions are required. Clear guidance on mounting and compatibility Compatibility with a toolholder depends on insert form, free angle, tolerance class, attachment method, size and thickness; this ISO-series insert fits holders specified for DNMG110402 geometry. The central cylindrical hole facilitates secure clamping and repeatable seating in indexable holders. When selecting a holder, match the insert size (11 mm) and thickness (4.76 mm) and confirm the 55° seating angle to ensure correct runout and clamping force. Practical benefits on the shop floor The double-sided design halves tooling costs per usable edge compared with single-sided inserts and simplifies inventory management. The T9215 grade is tuned for medium steel, so setups run longer between interventions and operators experience fewer unplanned stoppages. As a purpose-built ISO insert, it integrates into standard turning systems and supports both external and internal turning tasks without bespoke tooling adaptations. Contact Metav Werkzeuge for application guidance on Tungaloy inserts and to check availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6782305 Manufacturer SKU: TUN6782305 SKU: 6782305-Tungaloy Facts ISO designation: DNMG110402 Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Main angle: 55° Special features Grade/coating: T9215, CVD-coated carbide Shape: rhombic Chipbreaker: double-sided Hole: cylindrical hole (with hole) Series: ISO indexable turning insert series Application: turning FAQ What materials is this insert best suited for? The T9215 CVD-coated carbide grade is optimised for medium steel machining and offers a balance of wear resistance and toughness for continuous and lightly interrupted cuts. Can this insert be used for internal turning as well as external turning? Yes, the rhombic geometry and cylindrical hole allow the insert to be used for both external and internal turning when paired with a compatible holder designed for DNMG inserts. How is the insert clamped in the holder? The insert features a central cylindrical hole for secure clamping; compatibility depends on correct match of form, size (11 mm), thickness (4.76 mm) and seating angle. How many usable edges does the insert provide? The insert is double-sided, offering two cutting edges per index position and thereby extending the effective service life before replacement or disposal. What is the manufacturer's SKU and article number for ordering? Ordering references are Manufacturer SKU TUN6782305 and article number 6782305 for the DNMG110402 T9215 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide toughness and a double-sided chipbreaker, this insert provides consistent productivity and reliable wear and fracture resistance for medium-steel turning; Order the DNMG110402 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110402 T9215 DNMG turning insert (Tungaloy) — CVD-coated carbide for medium-steel turning, rhombic 55° geometry A DNMG110402 T9215 indexable insert designed for external and internal turning applications, offering high wear resistance and controlled chip formation for continuous to slightly interrupted cuts. CVD-coated carbide for high wear resistance Double-sided chipbreaker for improved chip control Rhombic 55° geometry for versatile turning tasks ISO-standard insert for straightforward holder compatibility Boosted productivity through wear-resistant cutting material The CVD-coated carbide grade T9215 combines a hard, wear-resistant coating with a tough substrate to deliver extended cutting life in medium-steel applications. This material pairing reduces flank wear under continuous cutting and lowers the frequency of insert changes, which translates into improved uptime and lower tooling cost per part. The result is a stable machining process that supports higher feed rates and longer uninterrupted runs without sacrificing surface quality. Secure fit and geometry that stabilise cutting forces The rhombic 55° geometry and 0° clearance angle provide a neutral cutting orientation that is particularly effective for general turning tasks where repeatability and tool stability are priorities. The insert’s cylindrical hole and standard dimensions ensure proper seating in compatible holders; compatibility is governed by holder form, relief angle, tolerance class, fastening method, size and thickness. Selecting the correct holder and clamping kit avoids movement under load and maintains concentricity, which benefits component accuracy and tool life. Practical system integration and economical handling As an indexable, double-sided plate the insert reduces tooling cost by offering two usable cutting edges before rotation or replacement is required. The machining system comprises the ISO insert, a matching external holder or boring bar, support shim/clamp set and replacement screws. Choosing the double-sided chipbreaker and grade adapted to the workpiece and machining stability improves chip control and surface finish while supporting efficient swarf evacuation. For application-specific parameter selection or material guidance, technical consultation is available to ensure the insert integrates seamlessly into the existing tool setup. Contact Metav Werkzeuge for tailored procurement or machining advice on Tungaloy DNMG110402 T9215 inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966124 Manufacturer SKU: TUN6966124 SKU: 6966124-Tungaloy Facts Size: 11 mm Corner radius: 0.2 mm Thickness: 4.76 mm Clearance angle: 0° Main geometry angle: 55° Special features ISO indexable turning insert series Designation: DNMG110402 Grade/coating: T9215, CVD-coated carbide Chipbreaker: double-sided Shape: rhombic Hole: with cylindrical hole Typical application: turning (external and internal) FAQ What materials is this insert intended for? The DNMG110402 T9215 insert from Tungaloy is specified as a first-choice grade for medium steel turning, combining wear resistance and fracture toughness suitable for continuous to slightly interrupted cuts (SKU: 6966124-Tungaloy). How does the chipbreaker affect machining? The double-sided chipbreaker on the DNMG110402 helps control chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement during medium-steel turning operations. Will this insert fit existing DNMG holders? Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness; the DNMG110402 conforms to ISO dimensions, so correct matching to an ISO DNMG holder and clamping set is required. How many cutting edges are available per insert? This rhombic, double-sided insert provides multiple indexed edges; rotation or replacement extends service life and reduces tooling cost per component when used with appropriate clamping hardware. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
DNMG 110402 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that balances toughness and wear resistance with a double-sided chipbreaker for stable chip control; order directly via Metav Werkzeuge or consult our technical advisors for selection and availability. DNMG 110402 T9225 turning insert by Tungaloy — CVD-coated carbide, rhombic 55° geometry DNMG110402 T9225 is a rhombic, ISO-format turning insert engineered for external and internal turning operations where a robust universal grade is required CVD-coated carbide T9225 universal grade 55° rhombic shape for versatile clamping Double-sided chipbreaker for stable chips 0.2 mm corner radius for fine finishing Longer tool life and predictable performance for medium to heavy steel turning The CVD-coated carbide composition and the T9225 grade provide a deliberate balance between wear resistance and toughness, making this insert suitable for medium to heavy steel machining and transient engagement conditions. CVD (chemical vapour deposition) produces a hard, wear-resistant surface layer that reduces flank and crater wear, while the carbide substrate absorbs cutting shocks. The result is consistent tool life under mixed cutting conditions and reduced downtime through fewer insert changes. Geometry that delivers repeatable accuracy and secure clamping A 55° rhombic geometry combined with a 0° clearance angle and a cylindrical hole ensures reliable seat and repeatable register in compatible holders. The standardised ISO form and the specified dimensions — 11 mm size and 4.76 mm thickness — mean interchangeability across ISO-compatible systems. Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness, so selecting the correct holder and clamping set keeps the cutting edge stable and the workpiece finish consistent. Improved productivity through controlled chip formation The double-sided chipbreaker and the inserted chip control features promote stable chip formation across varying depths of cut. Stable chips reduce the risk of re-cutting and protect the machined surface, which helps to shorten cycle times and lowers rework rates. Using this insert in an appropriate holder and with matching cutting conditions enables efficient material removal while maintaining surface quality. System-level clarity and application guidance This insert is supplied as part of an ISO turning insert system: ISO-format insert, matching external holder or boring bar, shim/clamping set and spare screws. For turning and internal operations, choose the chipbreaker and grade that correspond to the workpiece material and machine stability. The 0.2 mm corner radius is suitable for fine finishing and semi-finishing; larger radii are recommended where higher strength at the nose is required. For interrupted cuts or unstable set-ups, the T9225 grade offers additional toughness to withstand shock loads. For reliable medium-to-heavy steel turning with Tungaloy quality, contact Metav Werkzeuge for availability and application support via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 6787099 Manufacturer SKU: TUN6787099 Retail SKU: 6787099-Tungaloy Core data Geometry angle: 55° Size: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Special features Rhombic plate form Cylindrical hole Double-sided chipbreaker CVD-coated carbide (T9225) Material: carbide Application: turning (external and internal) ISO designation: DNMG110402 FAQ What materials is this insert suited for? The DNMG110402 T9225 turning insert is designed primarily for steel machining, covering medium to heavy-duty turning where toughness and wear resistance are required. Can the insert handle interrupted cuts? Yes. The T9225 grade provides added toughness suitable for slightly interrupted cuts and changing engagement conditions. How does the chipbreaker influence surface finish? A properly matched double-sided chipbreaker promotes controlled chip evacuation, which helps to protect the machined surface and contributes to a consistent finish when combined with correct cutting parameters. Which holder type is compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the 55° rhombic form fits standard ISO holders designed for DNMG-style inserts. Is this insert reversible or indexable? The insert is double-sided and indexable, enabling multiple cutting edges per insert to improve economy and reduce tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and a 55° rhombic geometry to maintain stable performance in medium-to-heavy steel turning. The T9225 grade provides increased toughness for variable cutting conditions, while the 0.2 mm corner radius and 4.76 mm thickness ensure consistent chip control and predictable wear. Order the DNMG110402 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110402 T9225 — DNMG ISO turning insert for turning (Tungaloy) The DNMG 110402 T9225 is an ISO rhombic indexable insert designed for turning operations, offering a tough universal grade for medium-to-heavy steel machining and reliable performance in interrupted cuts. CVD-coated carbide universal grade T9225 55° rhombic geometry for versatile turning Cylindrical hole, compatible with ISO holders Double-sided with 0.2 mm corner radius Reliable performance for variable cutting conditions Manufactured as a CVD-coated carbide insert, the grade balances hardness and toughness to withstand changing engagement and slight interruptions in the cut. The chosen grade is optimised for medium-to-heavy steel machining, so tool life is extended under fluctuating loads and feed rates. This results in fewer changeovers and a more predictable production rhythm, supporting higher process reliability and improved throughput. Predictable fit and secure clamping for consistent results The rhombic 55° geometry and cylindrical hole allow straightforward matching to ISO-compliant toolholders. The plate thickness of 4.76 mm and the specified tolerances make it possible to achieve a stable clamping interface, which reduces micro-movements and enhances surface finish consistency. Compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness; selecting a matching holder and clamping kit ensures repeatable alignment and secure fixation. Effective chip control and economical cutting edge usage A double-sided design gives two usable cutting edges per indexable insert, while the 0.2 mm corner radius helps balance edge strength and surface integrity at typical turning feeds. The incorporated chipbreaker concept supports reliable chip segmentation in steel, reducing risk of built-up edge and improving evacuation. For workshops seeking cost-effective productivity, the insert’s universal character allows fewer grade changes across mixed batch types, contributing to lower tooling inventory and straightforward process planning. Contact Metav Werkzeuge for original Tungaloy inserts and tailored advice on holder compatibility and grade selection Technical data Article number: 6787105 Manufacturer SKU: TUN6787105 SKU: 6787105-Tungaloy Designation: DNMG110402 T9225 Model series: ISO indexable turning inserts Application: Turning Facts Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 55° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide (T9225) Robust universal grade for medium-to-heavy steel Rhombic plate form (DNMG) Double-sided chipbreaker Compatibility with ISO toolholders Suitable for interrupted cuts and variable engagement FAQ How is the DNMG110402 T9225 best used in production? The DNMG110402 T9225 insert is intended for external and internal turning of medium-to-heavy steel; the universal T9225 grade is chosen where variable engagement or light interruptions require increased toughness. Can the insert be indexed to gain further cutting edges? Yes, the insert is double-sided and provides two usable cutting edges; indexing of the DNMG110402 T9225 extends the effective tool life before replacement. Which toolholders are compatible with this rhombic insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG110402 is designed for ISO-compliant holders with a matching 55° rhombic seat and cylindrical hole. Is the T9225 grade suitable for interrupted cuts? The T9225 grade, a CVD-coated carbide, offers increased toughness and is suitable for slightly interrupted cuts and changing engagement typical in medium-to-heavy steel machining. What benefits does the 0.2 mm corner radius deliver? A 0.2 mm corner radius balances edge strength and surface finish, improving stability at moderate feeds while helping to prevent brittle chipping during heavier engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 grade and CVD-coated carbide construction combined with ISO compatibility for reliable medium to heavy turning operations; order directly via Metav Werkzeuge or request advice from the consultants for application matching. DNMG 110402 T9225 – Indexable Turning Insert for Turning by Tungaloy (CVD-coated carbide, 55°) The DNMG110402 T9225 is an ISO-standard rhombic indexable insert designed for turning applications, offering a robust CVD-coated carbide grade and a geometry suited to medium and heavy steel machining. CVD-coated carbide grade T9225 For medium to heavy steel turning Rhombic insert, 11 mm IC, 55° geometry Double-sided chipbreaker, cylindrical hole Maximised productivity through a robust coating and grade The combination of a CVD-coated surface and the T9225 carbide formulation delivers a balance of toughness and wear resistance that supports higher cutting volumes in mixed-production environments. This universal grade is intended for medium to heavy steel turning where variable engagement or light interruptions occur; the result is improved tool life and fewer insert changes during a production shift. For process planners, the predictable performance of a CVD layer reduces unplanned downtime and supports consistent cycle times, contributing directly to shop-floor efficiency and lower overall cost per part. Reliable fit and reduced setup complexity with ISO conformity As an ISO-standard indexable insert with a rhombic shape, 11 mm inscribed circle and 4.76 mm thickness, the component is compatible with a wide range of holders when form, free angle, tolerance class, fastening, size and thickness match. The insert’s 55° main cutting angle and 0° free rake are specified to deliver stable cutting geometry in many holder systems, while the cylindrical hole ensures secure clamping and repeatable positioning. For engineers tasked with retrofitting or replacing inserts, this clarity in dimensions and tolerance reduces setup iterations and shortens changeover time. Better chip control and surface quality with a double-sided chipbreaker The integrated double-sided chipbreaker is tailored to chip form management and reduces the likelihood of entangling or long, stringy chips during steel turning. Controlled chip formation aids in maintaining a consistent surface finish and decreases secondary handling or cleaning operations. In practice, shops report fewer interruptions to automated tending systems and lower scrap rates when chip flow is managed at the insert level, so the investment in a purpose-designed chipbreaker supports higher first-pass yield and fewer downstream corrective operations. Economic advantages from a universal, durable insert grade Choosing a universal grade such as T9225 supports flexible production planning: one insert accommodates a range of steels and mixed batch conditions, cutting the need for multiple specialised grades. The carbide substrate combined with a CVD coating contributes to extended edge life under moderate to heavy loads, lowering the frequency of index changes and reducing per-part tooling expense. For procurement, the standardised form and clear SKU information simplify inventory management and make batch replenishment straightforward for high-volume manufacturing. For a technical match, quotation or to secure the DNMG110402 T9225 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert assistance and prompt processing. Technical data Article number: 6966125 Manufacturer SKU: TUN6966125 SKU: 6966125-Tungaloy Model series: ISO indexable turning inserts Application: Turning Dimensions / Core data Inscribed circle (IC): 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Main cutting angle: 55° Free rake angle: 0° Hole: cylindrical Features / Material Material: carbide Coating: CVD-coated carbide Grade: T9225 Insert form: rhombic Chipbreaker: double-sided Sidedness: double-sided Compatibility: ISO-standard holders (form, tolerance, fastening, size and thickness determine fit) FAQ Is this insert suitable for steel turning? Yes. The DNMG110402 T9225 insert from Tungaloy is designed as a robust universal grade for medium to heavy steel turning and performs well under variable engagement conditions. What does the T9225 grade indicate? The T9225 designation denotes a CVD-coated carbide grade optimised for toughness and wear resistance, offering balanced performance for a range of steel machining tasks. How is compatibility with holders determined? Compatibility is determined by the insert’s form, free angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and repeatable geometry for the indexable insert. Can the insert handle interrupted cuts? The T9225 grade is formulated to offer additional toughness for applications that include light interruptions, making this insert a practical choice when engagement conditions vary. How can the DNMG110402 T9225 be identified for reordering? Reorder using the manufacturer article number 6966125 or the SKU 6966125-Tungaloy; the designation DNMG110402 and grade T9225 specify the form and coating for correct replenishment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110402 T9225 Wendeplatten - Tungaloy
Benefit from the robust combination of a CVD-coated carbide grade and a 0.2 mm corner radius for stable chip formation and reliable performance in medium to heavy turning. Order the DNMG110402 T9225 insert directly via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. DNMG 110402 T9225 – Tungaloy turning insert for ISO‑standard operations (CVD‑coated carbide, 0.2 mm radius) A DNMG110402 T9225 indexable insert designed for ISO‑compliant external and internal turning, offering a universal grade for variable cutting conditions and interrupted cuts CVD-coated carbide for extended tool life Universal grade for medium to heavy steel machining ISO‑standard rhombic DNMG form for holder compatibility 0.2 mm corner radius for precise edge control Stable cutting performance under varying conditions The T9225 CVD-coated carbide grade delivers a balance of toughness and wear resistance that suits medium to heavy-duty steel machining. As a universal grade, it copes well with slight interruptions and variable engagement, which reduces the risk of edge chipping and downtime. The coating enhances abrasion resistance and extends tool life, leading to fewer indexings and more predictable tool-change intervals — a clear productivity advantage in batch and job‑shop environments. Precise geometry and secure mechanical compatibility The rhombic DNMG geometry with a defined 55° cutting angle and 0.2 mm corner radius provides a dependable interaction between insert and workpiece, translating into consistent surface finish and controllable cutting forces. Compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness; therefore the ISO designation ensures straightforward replacement in standard DNMG seats. The cylindrical hole and double‑sided design allow economical use of both cutting edges, while the nominal plate thickness supports stable clamping. Practical application advice for turning processes Use this insert family for both external and internal turning where a robust, versatile grade is required; pair the chipbreaker style with the workpiece material and machine stability to optimise swarf control and surface integrity. The combination of CVD coating and a resilient substrate means fewer interruptions for tool maintenance and more consistent cycle times, supporting cost‑effective production. For mixed batches or uncertain cutting conditions, the universal nature of the grade simplifies tooling decisions and reduces inventory complexity. For tailored advice on applying Tungaloy CVD‑coated inserts or to secure stock through Metav Werkzeuge, please contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944638 Manufacturer SKU: TUN6944638 Model series: ISO‑turning indexable inserts Material: Cemented carbide Grade/coating: T9225 (CVD‑coated) Numeric data ISO code: 110402 Insert designation: DNMG110402 Size: 11 Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Cutting angle: 55° Special features Application: Turning (external and internal) Chipbreaker: double‑sided Hole: with hole, cylindrical hole Plate form: rhombic System components: insert, compatible external holder or boring bar, shim/clamping set and replacement screws Designed for variable engagement and slightly interrupted cuts FAQ What materials is this insert best suited for? The DNMG110402 T9225 insert is formulated as a universal grade for steel machining, providing robust performance in medium to heavy steel applications. Can the insert be used for interrupted cuts? Yes. The T9225 grade and the carbide substrate are specified to tolerate slightly interrupted cuts and changing engagement conditions, making the insert suitable for such applications. How does ISO designation help with holder compatibility? The ISO‑compliant DNMG110402 designation ensures the insert matches standard DNMG holder seats; compatibility still depends on form, relief angle, tolerance class, fastening and thickness. Is the insert reversible or single‑use per edge? This design is double‑sided with a cylindrical hole and allows the use of both cutting edges, providing economical rotation and reuse of the insert edges. Which chipbreaker should be selected for unstable setups? Select a chipbreaker that prioritises toughness and controlled chip segmentation for unstable set‑ups; the combination with the T9225 grade helps maintain stable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide for extended wear resistance and a 55° rhombic geometry with a 0.4 mm corner radius for consistent surface finish and process security; order directly via Metav Werkzeuge or request application advice from our consultants. DNMG110404 AH120 turning insert by Tungaloy The DNMG110404 AH120 is an ISO‑standard rhombic turning insert designed for external and internal turning where a sharp cutting edge and process reliability are required. PVD-coated carbide grade AH120 Sharp cutting edge for process security ISO‑standard rhombic insert, 55° cutting angle Double-sided chipbreaker with cylindrical hole Precision grade for stable production and longer tool life The PVD-coated AH120 grade combines a hard coating with a carbide substrate to provide enhanced wear resistance and stable cutting-edge behaviour during continuous turning. This indexable insert offers predictable performance in repetitive operations, which reduces unplanned stoppages and contributes to lower total machining costs. The coating process improves adhesion and edge protection; for users unfamiliar with coatings, PVD (physical vapour deposition) forms a thin, wear-resistant layer that helps maintain a sharp cutting edge under moderate to demanding cutting conditions. ISO compatibility and practical holder selection This insert conforms to the ISO turning plate family and its compatibility with a toolholder is governed by geometry factors such as form, free angle (0°), tolerance class, fastening method, size and thickness. For reliable clamping and repeatable results, match the rhombic plate and the cylindrical hole to a holder designed for DNMG plates. Selecting the correct chipbreaker and grade should be done according to the workpiece material and machining stability; choosing the AH120 grade is advantageous when a combination of sharpness and process security is the priority. Geometry that balances strength and finish With its rhombic form, an effective 55° cutting angle and a 0.4 mm corner radius, the insert delivers a compromise between edge strength and the ability to produce a fine surface. The 4.76 mm thickness and double-sided design increase the number of indexable cutting edges per insert, improving cost efficiency. The geometry supports both roughing and finishing passes when paired with the right chipbreaker; a smaller corner radius reduces cutting forces and improves finish, while the rhombic shape allows flexible approach angles in external and internal turning. Productivity and application guidance for workshop use When fitted correctly into a matched holder and used with appropriate machining parameters, this Tungaloy insert helps maintain consistent part quality and extends toollife, which supports higher throughput. The double-sided nature and the robust grade reduce the frequency of insert changes, lowering downtime. For applications where predictable chip formation and stable cutting are required, this indexable plate is a practical choice; operators benefit from a clear selection path—choose chipbreaker and grade to suit the material, the machining allowance and the rigidity of the setup. For tailored recommendations on using the Tungaloy DNMG110404 AH120 insert in specific turning tasks, contact Metav Werkzeuge for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793702 Manufacturer SKU: TUN6793702 Dealer SKU: 6793702-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG110404 Grade / coating: AH120 (PVD-coated) Material: carbide Thickness: 4.76 mm Size: 11 mm Cutting angle: 55° Corner radius: 0.4 mm Free angle: 0° Special features Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: external and internal turning System components: ISO insert, matching external holder or boring bar, backing/clamping set and replacement screws FAQ Which machining tasks suit this insert best? The DNMG110404 AH120 Tungaloy insert is intended for external and internal turning where a sharp cutting edge and process security are required; it is best applied where repeatable performance and controlled chip formation are important. How is the insert fixed to the toolholder? Compatibility is determined by form, free angle, tolerance class, fastening, size and thickness; the DNMG110404 uses a cylindrical hole for reliable clamping in holders designed for ISO DNMG plates. What does the AH120 grade provide? AH120 is a PVD-coated carbide grade offering enhanced wear resistance and protection against chipping, making it suitable for operations that demand a sharp edge and stable cutting performance. Can the insert be indexed and reused? Yes, the insert is double-sided and indexable; flipping to a fresh cutting edge extends usable life and improves overall cost efficiency. How do geometry features affect part quality? The 55° cutting angle and 0.4 mm corner radius balance edge strength and surface finish; smaller radii help achieve finer finishes while the rhombic shape allows versatile approach angles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH120 Wendeplatten - Tungaloy
The combination of PVD-coated carbide AH120 and ISO compatibility delivers sustained cutting performance and reliable process security; its rhombic 55° geometry with a 0.4 mm nose radius ensures consistent surface finish and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the Metav advisors for application-specific recommendations. DNMG110404 AH120 Tungaloy insert — ISO rhombic turning insert for external and internal turning, PVD-coated carbide, 55° The DNMG110404 AH120 is an ISO rhombic turning insert designed for stable external and internal turning operations where a sharp cutting edge and high process security are required. PVD-coated carbide grade AH120 55° rhombic geometry with 0.4 mm nose radius ISO DNMG110404 with cylindrical hole Double-sided chipbreaker for stable cuts High process security through a wear-resistant grade The PVD-coated carbide of grade AH120 provides a wear- and fracture-resistant cutting edge that supports uninterrupted turning cycles. Built to ISO dimensions, the insert fits standard indexable holders when matching form, clearance angle, tolerance class, fastening method, size and thickness. The practical consequence is fewer unexpected tool changes and a reduction in process variability, which translates into measurable gains in throughput and component consistency. Better surface finish and steady productivity with optimised chip control The rhombic geometry combined with a double-sided chipbreaker produces stable cuts and an improved surface finish in a wide range of turning tasks. For shops seeking reliable daily performance, this configuration reduces the need for repeat machining and trimming, resulting in higher net productivity and repeatable part quality. The build encourages confident feed and speed choices for common external and internal turning jobs. Geometry and handling that simplify tooling decisions With a 55° cutting angle, rhombic form, 0° clearance and a 0.4 mm nose radius, the insert offers a balanced compromise between robustness and detail reproduction. The plate thickness of 4.76 mm and size 11 dimension suit standard ISO clamping systems, while the cylindrical hole ensures secure fastening. The PVD coating increases thermal resistance and adhesive wear protection, extending contact life and allowing consistent cutting parameters across mixed materials. Select the appropriate chipbreaker and grade according to workpiece material and machining stability for optimised results. For reliable turning performance and tailored application advice for the Tungaloy DNMG110404 AH120, contact Metav Werkzeuge or request an individual recommendation from our technical team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6793705 SKU manufacturer: TUN6793705 SKU: 6793705-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Nose radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Size: 11 Special features Material: carbide Coating: PVD-coated carbide (AH120) Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided ISO designation: DNMG110404 FAQ What materials is this insert suitable for? The Tungaloy DNMG110404 AH120 insert is a PVD-coated carbide grade designed for broad material coverage; the AH120 grade is optimised for wear resistance and process security in typical turning applications. Can the DNMG110404 AH120 be used for both external and internal turning? Yes. The DNMG110404 AH120 turning insert is specified for both external and internal turning when used with a compatible ISO holder and matching clamping system. What benefit does the PVD coating provide? The PVD coating on the AH120 grade increases thermal and adhesive wear resistance, resulting in longer tool life and steadier cutting performance during extended runs. Is the geometry compatible with standard holders? The ISO DNMG110404 form, 55° geometry and mounting hole are compatible with standard indexable turning holders provided the holder matches form, clearance angle, tolerance class, fastening and thickness. How does the double-sided chipbreaker influence machining? The double-sided chipbreaker improves chip control and contributes to stable cutting conditions, which supports consistent surface quality and reduces interruptions during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade and the proven DNMG geometry for reliable performance in rostfreier Stahl turning; the balanced AH6225 grade provides a sharp yet stable cutting edge for medium machining. Order the DNMG110404 AH6225 insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG110404 AH6225 rhombic turning insert (ISO) for rostfreier Stahl – Tungaloy, PVD-coated carbide, 55° A DNMG110404 AH6225 ISO rhombic insert designed for external and internal turning, offering a sharp, stable cutting edge and compatibility with standard ISO holders for flexible workshop use. PVD-coated carbide substrate AH6225 Designed for rostfreier Stahl machining Rhombic DNMG geometry, 55° cutting angle Double-sided insert with cylindrical hole Consistent, adaptable cutting performance The AH6225 grade combines a PVD-coated carbide substrate with a geometry tuned to deliver repeatable results when machining rostfreier Stahl. The coating increases wear resistance while preserving a keen edge, which is particularly valuable under varying cutting conditions. The 0.4 mm corner radius favours a good balance between edge strength and surface finish; in practice this means fewer insert changes and more predictable parts quality during medium cutting operations. Predictable fit and secure clamping for faster set-ups Built to ISO dimensions, the insert ensures straightforward compatibility with matching holders and tool assemblies. The ISO standard geometry and a cylindrical hole facilitate stable clamping and precise positioning, reducing setup variance between tool changes. Because fit is determined by form, relief angle, tolerance class, fastening and thickness, selecting the correct holder and clamp set is essential for maximising repeatable accuracy on the lathe. Robust economy through reindexable design and universal application As a double-sided, reindexable insert, the design increases usable edge count and lowers per-part tooling cost. The AH6225 grade is a universal choice for rostfreie Stähle, offering stable chip formation and acceptable tool life across a range of stainless materials and machining conditions. For both external and internal turning, choosing the appropriate chipbreaker and matching stability will deliver the best compromise between productivity and surface integrity. Contact Metav Werkzeuge today for tailored application advice and to secure the Tungaloy DNMG110404 AH6225 insert for dependable rostfreier Stahl turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966135 Manufacturer SKU: TUN6966135 SKU: 6966135-Tungaloy Type designation: DNMG110404 AH6225 Manufacturer: Tungaloy Facts Cutting edge angle: 55° Corner radius: 0.4 mm Relief angle: 0° Thickness: 4.76 mm Size: 11 mm Special features Material: Hartmetall Coating: PVD Shape: rhombic Hole: cylindrical hole Insert style: double-sided, reindexable System: ISO turning inserts Application: turning (external and internal) Grade use: universal grade for rostfreie Stähle FAQ What materials is this insert suited for? The DNMG110404 AH6225 insert is intended primarily for rostfreie Stähle and performs well in medium cutting conditions on stainless materials. Can the insert be re-sharpened or re-used? The DNMG110404 geometry is double-sided and reindexable; edges can be indexed to use multiple cutting corners, but re-grinding depends on workshop capability and is not typically necessary for economical operation. Which holders are compatible with this ISO insert? Compatibility is determined by ISO form, relief angle, tolerance class, fastening, size and thickness; use an ISO-compliant DNMG external or internal holder with matching clamp set for secure mounting. How does the AH6225 coating affect performance? The PVD layer on the AH6225 grade improves wear resistance while retaining a sharp cutting edge, helping to maintain surface finish and extend edge life in rostfreier Stahl applications. What is the manufacturer SKU for ordering? The manufacturer SKU for this Tungaloy insert is TUN6966135 and the article number is 6966135. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Combine robust cutting performance with consistent edge stability and straightforward ISO compatibility for reliable turning operations; order directly via Metav Werkzeuge or consult our team for application support. DNMG110404 AH6225 — rhombic turning insert, PVD-coated carbide, suitable for turning by Tungaloy DNMG110404 AH6225 is an ISO-standard rhombic indexable insert engineered for external and internal turning applications, optimised for rostfreier Stahl and mixed-production environments. PVD-coated universal grade AH6225 Optimised for rostfreier Stahl turning Rhombic 55° ISO form DNMG Double-sided chipbreaker with cylindrical hole Consistent cutting performance for demanding rostfrei operations The DNMG110404 AH6225 combines a PVD-coated hardmetal substrate with a geometry that delivers a sharp yet stable cutting edge under varying conditions. The universal grade AH6225 is designed to maintain edge integrity during medium-duty machining, reducing the frequency of regrinds and tool changes. The 0.4 mm corner radius balances strength and finish, enabling a fine surface on the workpiece while still withstanding intermittent loads. Emphasis on efficiency makes this insert a practical choice where process reliability and predictable tool life are key. ISO conformity and practical compatibility to speed set-up Constructed to ISO form and size, the insert’s rhombic 55° geometry and cylindrical hole ensure repeatable seating in standard holders; compatibility depends on form, relief angle, tolerance class, fastening and thickness. With a plate thickness of 4.76 mm and inscribed circle 11 mm, the component fits common DNMG holders and requires no special adaptation for most external and internal turning setups. The double-sided chipbreaker increases available cutting edges per insert, contributing to lower running costs and faster tool replacement cycles. Material-focused chip control and process economy The combination of coating and substrate yields stable chip formation when machining rostfreie Stähle, improving surface finish and reducing built-up edge. The insert’s design supports predictable heat and wear behaviour, supporting longer intervals between indexings. In practice, selecting the appropriate chipbreaker and the universal AH6225 grade for the specific stainless material and machining stability often results in higher productivity and fewer process interruptions. The result is a measurable improvement in throughput for serial and batch operations. For tailored advice on using Tungaloy turning inserts in workshop production environments, contact Metav Werkzeuge for application support and stock availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6947201 Manufacturer SKU: TUN6947201 SKU: 6947201-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG110404 AH6225 Tungaloy insert Facts Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Relief (clearance) angle: 0° ISO code: 110404 Special features Carbide substrate, PVD-coated Grade: AH6225 (universal for rostfreie Stähle) Rhombic insert form Double-sided chipbreaker With cylindrical hole For external and internal turning ISO-standard DNMG geometry FAQ What materials is this insert intended for? The DNMG110404 AH6225 insert is optimised for machining rostfreie Stähle and performs well across a broad range of stainless materials when paired with the correct chipbreaker and cutting data. How many cutting edges are available per insert? The insert features a double-sided chipbreaker, providing two primary cutting positions before indexing or replacement is required for the DNMG110404 AH6225. Which holder types are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening and thickness; the DNMG110404 follows ISO DNMG geometry for use in standard DNMG turning holders. What chip control can be expected when turning rostfrei components? With the AH6225 grade and the integrated chipbreaker, the insert supports stable chip formation and improved surface finish under medium-duty conditions. Is the coating suitable for interrupted cuts and variable conditions? The PVD coating on the AH6225 grade enhances edge stability and wear resistance, making the insert suitable for varying conditions and intermittent cutting typical in batch production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
High-performance turning with a PVD-coated carbide grade and a 0.4 mm corner radius ensures a durable, sharp cutting edge and consistent productivity; order the DNMG110404 AH6225 directly via Metav Werkzeuge or ask our consultants if needed DNMG 110404 AH6225 (Tungaloy) – ISO turning indexable insert, PVD-coated carbide, 0° clearance DNMG110404 AH6225 — a precision ISO turning insert designed for medium‑duty machining of stainless steel, combining a sharp, stable cutting edge with robust chip control for reliable daily production PVD-coated carbide for stainless steel Rhombic 11 size, 4.76 mm thickness Double-sided chipbreaker for stable chips Cylindrical-hole design, 0° clearance Higher throughput with predictable tool life The PVD-coated carbide grade AH6225 offers a measured balance between edge sharpness and wear resistance, which translates into fewer tool changes and steadier cycle times. The PVD-coated surface reduces adhesion of built-up edge when machining stainless steel, while the substrate provides toughness against intermittent cuts. In practical terms, this means improved process stability and a clearer return on machining time, especially when switching between varied turning tasks. Faster set-up and secure mounting for repeatable results Compatibility with holders is governed by form, relief angle, tolerance class, fastening, size and thickness; this ISO‑standard format simplifies tool management across machines. The 0° clearance and cylindrical hole enable secure clamping in many standard DNMG holders, reducing set-up time and minimising the risk of insert displacement. Clear, measurable specifications make it straightforward to match the insert to existing toolholders and fixtures, supporting repeatable part quality with minimal adjustment. Improved chip control and surface consistency The double-sided chipbreaker combined with a corner radius 0.4 mm produces controlled chip formation and a balanced cut, which benefits both chip evacuation and surface finish. A modest corner radius helps maintain a stable cutting edge under varying feed and depth conditions, reducing vibration and promoting consistent surface integrity. For many production environments, this also reduces the need for downstream finishing and lowers the chance of unexpected rework. Contact Metav Werkzeuge for application guidance and stock availability of the Tungaloy DNMG110404 AH6225 insert — technical consultants are available to advise on optimisation for specific stainless‑steel turning tasks. Technical data Article number: 6947080 Manufacturer SKU: TUN6947080 Internal SKU: 6947080-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Core specifications Corner radius: 0.4 mm Size: 11 Thickness: 4.76 mm Included angle: 55° Relief/clearance angle: 0° Special features PVD-coated carbide grade AH6225 Intended application: turning Double-sided chipbreaker Rhombic plate form (DNMG) Cylindrical hole (with hole) Compatibility determined by form, clearance, tolerance, fastening, size and thickness Suited for machining stainless steel FAQ What materials is this insert designed to machine? The DNMG110404 AH6225 insert is optimised for turning stainless steel, with a PVD-coated carbide grade chosen to manage adhesion and wear typical of that material group. How does the AH6225 grade affect tool life? AH6225 offers a compromise between sharpness and toughness; the PVD layer improves wear resistance while the carbide core maintains edge stability, leading to predictable tool life in medium machining conditions. Is the insert compatible with common DNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; the ISO DNMG format and cylindrical hole make the insert suitable for many standard DNMG external holders when those parameters match. What benefit does a 0° clearance provide? A 0° clearance simplifies mounting geometry and often yields a robust cutting configuration for external turning applications, aiding secure clamping and consistent contact with the toolholder. Does the double-sided chipbreaker mean two usable edges? Yes, the double-sided chipbreaker typically enables indexable use on both sides of the insert, effectively providing multiple cutting positions before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade and a precise 55° rhomboid geometry for consistent medium turning of stainless steels, plus straightforward holder compatibility checks for smooth production planning. Order the insert via Metav Werkzeuge or consult the technical team for application matching. DNMG 110404 AH6225 indexable turning insert for Turning — Tungaloy DNMG 110404 AH6225 is an ISO-standard indexable insert designed for general turning applications, offering a balanced cutting edge for medium machining of stainless steels and adaptable mounting to compatible holders. DNMG rhomboid shape, 55° principle PVD-coated carbide grade AH6225 0.4 mm corner radius for versatile finish Double-sided insert with cylindrical hole Consistent cutting performance for stainless-steel turning The combination of a PVD-coated carbide substrate and the AH6225 grade delivers a cutting edge that is both sharp and stable, specifically tuned for stainless steels under variable conditions. This cartridge-style insert supports medium cutting depths with reliable chip control thanks to the double-sided chipbreaker, reducing the need for frequent regrinding and helping to maintain cycle-time consistency. The coating extends tool life under intermittent contact and mitigates work hardening tendencies common to austenitic stainless alloys, which in turn improves process predictability during serial production. Geometry and dimensions that support repeatable finishes The 55° rhomboid geometry with a 0° clearance angle provides a robust seating and predictable cutting direction, which is beneficial for both external and internal turning operations. The 0.4 mm corner radius balances edge strength and surface finish, enabling a compromise between roughing stability and finishing quality. With a plate thickness of 4.76 mm and a nominal size of 11 mm, the insert integrates into standard ISO holders provided compatibility is checked for form, tolerance class, fastening and thickness. The central cylindrical hole ensures secure clamping and repeatable positioning in the clamping set and replacement screws. Practical system integration and operational advantages As part of an ISO-compliant system — insert plus matched external holder or boring bar, underlay/clamp set and replacement screws — the component simplifies stock-keeping and assembly in modular turning setups. The double-sided design maximises usable edges per insert rotation, supporting cost-efficient production runs. The PVD coating combined with the substrate chemistry promotes stable chip formation and good edge retention, lowering the frequency of tool changes in mixed-production environments. For application planning, the insert’s specification supports selection of chipbreaker and grade that suit the chosen material, machining strategy and machine-tool rigidity. For specification support on Tungaloy AH6225 turning inserts, contact Metav Werkzeuge for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966161 SKU: 6966161-Tungaloy Manufacturer SKU: TUN6966161 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO code: 110404 Shape: rhomboid, 55° Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Hole: with hole Hole style: cylindrical hole Special features Material: carbide Coating: PVD-coated Grade: AH6225 Chipbreaker: double-sided Application: turning (external and internal) Compatibility depends on holder form, clearance, tolerance, fastening and thickness FAQ What materials is this insert suited for? The DNMG 110404 AH6225 insert from Tungaloy is formulated primarily for stainless steels, offering a sharp yet stable cutting edge for medium machining under varying conditions. Is the insert compatible with standard ISO holders? The DNMG 110404 AH6225 follows ISO geometry; compatibility with an external holder or boring bar is determined by form, clearance angle, tolerance class, fastening method, size and thickness. How does the AH6225 grade affect tool life? The AH6225 PVD-coated grade provides improved edge stability and wear resistance in stainless-steel turning, which supports longer intervals between indexings compared with uncoated substrates in similar conditions. What advantages does the double-sided chipbreaker offer? The double-sided chipbreaker on this indexable plate enhances chip control and allows economical reuse of cutting edges, improving process efficiency during serial or batch production. Which assembly components are required for mounting? A matched ISO external holder or boring bar, an underlay/clamp set and the correct replacement screws are required to secure the DNMG 110404 AH6225 insert reliably in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
The combination of a sharp, stable cutting edge and an PVD‑coated carbide grade designed for stainless steels provides reliable surface quality and fewer tool changes in medium turning operations. Benefit from the ISO‑compatible rhombic geometry and simple clamping interface for fast insert replacement; order through Metav Werkzeuge or request application advice from the consultants. DNMG 110404 AH6225 indexable turning insert – rhombic, 55° for turning by Tungaloy DNMG 110404 AH6225 Tungaloy turning insert delivers a universal solution for medium turning of stainless steels, combining a sharp, resilient cutting edge with ISO‑standard compatibility for straightforward holder selection ISO‑standard rhombic insert, 55° orientation PVD‑coated AH6225 grade for stainless steel Double-sided chipbreaker for flexibility Cylindrical‑hole clamping, 4.76 mm plate thickness Consistent surface finish from a grade made for stainless steels The PVD‑coated carbide grade AH6225 is formulated for the demands of stainless steel machining, balancing a sharp cutting edge with edge stability under variable conditions. This composition reduces built‑up edge and improves consistency in surface finish when performing external or internal turning. For applications that require predictable dimensional results at moderate cutting data, the combination of coating and carbide substrate means fewer interventions, longer productive cuts and a more efficient process flow. Predictable set‑up and replacement thanks to ISO compatibility The rhombic insert follows the ISO‑standard DNMG110404 geometry, which defines shape, relief angle and tolerance class; this standardisation ensures compatibility with a wide range of outside holders and boring bars. The cylindrical hole enables conventional screw clamp mounting, while the 4.76 mm plate thickness and 11 mm size provide mechanical stability in interrupted cuts. These measurable specifications simplify tooling inventories and spare‑part management, enabling rapid replacement and reproducible clamping accuracy across setups. Lower process costs through stable chip control and tool life A double‑sided chipbreaker design allows the insert to be flipped, providing two usable edges and extending the effective life per insert. Combined with the PVD coating, the cutting edge resists abrasion and heat, which contributes to fewer tool changes and lower per‑part production costs. In medium turning operations the result is improved productivity and reduced downtime, with the economic advantage of extended service intervals without sacrificing surface quality or repeatability. Practical selection pointers for reliable results on the lathe Selecting the appropriate chipbreaker style and matching the insert to a compatible holder are the decisive steps for successful turning. The 55° approach angle favours stable cutting in general turning tasks and influences chip flow and cutting forces; a 0.4 mm corner radius helps achieve a balance between edge strength and surface finish. When machining stainless steels, choose cutting parameters that moderate heat build‑up and exploit the AH6225 grade’s resistance to built‑up edge for consistent part quality. Contact Metav Werkzeuge for tailored recommendations and to secure genuine Tungaloy DNMG110404 AH6225 indexable turning inserts from stock. Technical Data Article number: 6947166 Manufacturer SKU: TUN6947166 SKU: 6947166-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Plate designation: DNMG110404 Grade/coating: AH6225, PVD‑coated carbide Plate form: rhombic Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Approach angle: 55° Hole: with cylindrical hole Special features Material: carbide Double‑sided chipbreaker Designed for turning of stainless steels ISO‑standard geometry for holder compatibility FAQ What materials is this insert intended for? The AH6225 PVD‑coated carbide insert is designed principally for machining stainless steels in medium turning applications, offering a balance of sharpness and edge stability. How does the DNMG110404 geometry affect holder selection? The ISO DNMG110404 designation ensures the rhombic shape, relief angle and size match ISO‑compatible outside holders and boring bars; the cylindrical hole accepts standard screw clamping mechanisms. How many cutting edges are available per insert? Thanks to the double‑sided chipbreaker, the insert provides two usable cutting edges, effectively doubling the number of edges before replacement is required. What surface finish can be expected with a 0.4 mm radius? A 0.4 mm corner radius tends to produce a good compromise between edge strength and surface finish, yielding consistent surfaces in general turning while maintaining robustness under moderate loads. Is the insert suitable for interrupted cuts? The 4.76 mm thickness and rhombic form provide sufficient rigidity for many interrupted turning tasks when paired with a robust holder and correct cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Combine the PVD-coated AH6225 grade with a 55° rhombic geometry and a 0.4 mm corner radius to achieve steady cutting performance and longer edge life in stainless steel turning; order the insert directly via Metav Werkzeuge or request application advice from our consultants. DNMG 110404 AH6225 Tungaloy ISO turning insert — PVD-coated carbide, 55° The DNMG110404 AH6225 Tungaloy insert is an ISO rhombic, double-sided indexable insert engineered for medium turning of stainless steels, balancing a sharp cutting edge with robust wear resistance. PVD-coated carbide grade AH6225 Optimised for stainless steel turning Rhombic 55° geometry, corner radius 0.4 mm Double-sided design with cylindrical hole Consistent cutting performance in stainless steel turning The universal AH6225 grade, delivered as a PVD-coated carbide substrate, is formulated to provide a sharp yet stable cutting edge under variable cutting conditions. The coating reduces abrasive wear and helps maintain edge geometry, which translates into fewer edge changes and more predictable cycle times. The relatively small 0.4 mm corner radius offers a compromise between surface finish and tool strength, enabling reliable medium-depth cuts without sacrificing component quality. Such technical balance supports consistent productivity in batch and job-shop environments. ISO compatibility and secure clamping for process stability Compatibility with the machining system depends on form, relief angle, tolerance class, fastening method, size and thickness; the insert’s ISO form and rhombic geometry ensure use with standard 55° turning holders. The cylindrical hole and defined plate thickness of 4.76 mm contribute to secure clamping and repeatable seating, reducing vibration and promoting dimensional consistency. A double-sided design halves stocking variants and allows fast indexation, improving uptime and simplifying tool management in production-oriented workshops. Lower tooling costs through extended edge life and application flexibility A universal grade tailored to stainless steels enables broader coverage across varying alloys and temperatures, decreasing the need for constant grade changes. The PVD coating improves wear resistance on the rake face while the substrate supports a reliable cutting edge, which together reduce the frequency of insert replacement and lower cost per component. Choosing the correct chipbreaker and matching the insert’s geometry to the holder delivers better chip control and safer machining, which in turn supports predictable tool costs and higher overall process efficiency. For reliable stainless steel turning with Tungaloy AH6225 inserts, contact Metav Werkzeuge for tailored holder compatibility and fast supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6903194 SKU: 6903194-Tungaloy Manufacturer SKU: TUN6903194 Label: DNMG110404 AH6225 Tungaloy-Wendeplatte Model series: ISO turning inserts Facts Corner radius: 0.4 mm Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Relief angle: 0° Cutting angle: 55° Hole: with cylindrical hole Special features Grade AH6225, PVD-coated carbide Suitable for stainless steel machining Rhombic plate form, double-sided chipbreaker ISO-normed indexable insert Cylindrical hole for secure clamping Application: turning FAQ Which materials is this insert best suited for? The DNMG110404 AH6225 Tungaloy insert is optimised for stainless steels and performs well under the mixed conditions typical of medium turning operations. How does the insert secure in the holder? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the DNMG110404’s cylindrical hole and defined thickness ensure reliable clamping in compatible 55° holders. What are the advantages of the AH6225 grade and PVD coating? AH6225 combined with a PVD-coated carbide substrate offers improved wear resistance and a stable cutting edge, reducing edge changes and providing predictable tool life in varying conditions. Is the insert indexable to extend edge life? Yes — the double-sided design of this rhombic insert allows indexing to a fresh cutting edge, extending usable life and reducing stocking complexity for workshop operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, a rhombic 55° approach for versatile turning, and a double-sided chipbreaker that reduces tooling cost; order this insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 110404 AH6225 — Indexable turning insert (ISO 110404) | Tungaloy DNMG110404 AH6225 is an ISO-standard indexable insert for turning, engineered for medium machining of stainless steels with a stable, sharp cutting edge and a double-sided chipbreaker. PVD-coated carbide for stainless steels Rhombic form with 55° approach angle Double-sided chipbreaker for economical use Cylindrical hole for secure clamping Reliable edge and material versatility The PVD-coated carbide of the grade AH6225 combines a keen cutting edge with sufficient edge stability for medium-duty turning of stainless steels. This balance reduces the risk of edge chipping under varying conditions and supports consistent surface quality. The combination of coating and substrate provides improved wear resistance compared with uncoated grades, which translates into longer intervals between insert changes and lower overall tooling expenditure. Cost-efficient handling through a double-sided design Designed as a double-sided indexable insert, the DNMG110404 offers two usable cutting edges, effectively doubling life per insert versus single-sided alternatives. The indexable insert geometry and the rhombic form with a 55° approach angle allow efficient reach into shoulder and profile turns while maintaining rigidity. For workshops aiming to improve uptime, this geometry supports fast, repeatable index changes and straightforward inventory management. Predictable results through system compatibility Compatibility with turning holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The ISO-standard designation means the insert aligns with established holder interfaces, but correct pairing is essential: choosing a holder with the matching clamp or screw, a suitable shim or seat and an appropriate tolerance class ensures stable clamping and consistent cutting conditions. Stable assembly reduces vibration, improves tool life and yields reproducible part tolerances. Choosing the right chipbreaker and grade for the job The double-sided chipbreaker on this insert is tailored to interrupt chips reliably in a variety of cut depths and feeds commonly encountered in stainless-steel turning. Selecting the correct chipbreaker style and the AH6225 grade for the specific alloy and cutting conditions will optimise chip control, surface finish and tool life. When process stability or material grade is uncertain, refer to the model series guidance or consult technical advisors for the best match between insert, holder and machining parameters. For tailored advice or to place an order for Tungaloy inserts via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — assistance is available for selection and compatibility checks. Technical Data Article number: 6947130 SKU: 6947130-Tungaloy Manufacturer SKU: TUN6947130 Manufacturer article number: 6947130 Brand: Tungaloy Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Free clearance angle: 0° Hole: with cylindrical hole Special features Material: Carbide Coating: AH6225 (PVD) Shape: Rhombic Chipbreaker: Double-sided Application: Turning Model series: ISO turning indexable inserts Mounting: compatible with ISO holders; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited to machine? The DNMG110404 AH6225 indexable insert is optimised for machining stainless steels; the AH6225 grade delivers a balance of sharpness and edge stability for medium turning tasks. How is the insert mounted in a holder? Mounting uses the insert’s cylindrical hole with the appropriate clamp or screw and a matching seat or shim; ensure the holder matches the ISO form, size and thickness for correct fit. How does the chipbreaker affect performance? The double-sided chipbreaker on the insert improves chip control across a range of feeds and depths, aiding surface finish and reducing the risk of long, entangling chips in turning operations. Can the insert be used for both external and internal turning? Yes; the rhombic 55° geometry and compact dimensions allow the insert to be applied to both external and internal turning when holder geometry permits. How many usable cutting edges does the insert provide? As a double-sided indexable insert, the DNMG110404 AH6225 provides two usable cutting edges per insert, enabling economical edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of a sharp, stable cutting edge and universal PVD-coated AH6225 grade for consistent medium-duty turning of stainless steels; the ISO conformity and rhombic geometry ensure reliable fit in ISO holders. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG 110404 AH6225 DNMG110404 turning insert by Tungaloy, PVD-coated carbide, 55° The DNMG110404 AH6225 Tungaloy insert is an ISO-standard rhombic turning insert for external and internal turning, designed to deliver a sharp yet stable cutting edge for medium machining under changing conditions. ISO rhombic insert DNMG 110404, 55° cutting angle PVD-coated AH6225 grade for stainless steels Double-sided chipbreaker for reliable chip control 0.4 mm corner radius for versatile medium-duty turning Consistent results with PVD-coated AH6225 for stainless steels The PVD-coated carbide grade AH6225 offers a compromise between edge sharpness and wear resistance tailored to stainless steels. This balance reduces the tendency for built-up edge and helps to maintain surface finish during medium-duty operations. As an ISO-standard rhombic plate, the geometry supports repeatable engagement conditions, which simplifies process setup and delivers stable component quality even when alloys or cutting conditions vary. Geometry and holder compatibility explained for confident integration The rhombic plate format with a 55° cutting angle and cylindrical hole defines mechanical fit and clamping behaviour. Compatibility with a turning holder is determined by plate shape, relief (0°), tolerance class, fastening and plate thickness; the 4.76 mm thickness and 11 mm size are standard dimensions that match many ISO holders. Understanding these parameters ensures correct seating and clamping force, which in turn prevents chatter and uneven wear during machining. Chip control and productivity advantages from insert design The integrated double-sided chipbreaker improves fragmentation and evacuation of swarf in turning operations, supporting consistent cutting forces and surface quality. The small 0.4 mm corner radius increases versatility for finishing and semi-finishing passes, while the robust PVD layer on the substrate extends edge life compared with uncoated grades. Together, these features contribute to lower downtime and a more predictable tool-change cadence in production environments. Practical guidance for selection and system setup Select the chipbreaker and grade to match the workpiece material, machining strategy and machine rigidity; the plate is supplied as part of an ISO insert system that includes a suitable external holder, shim/clamp set and replacement screws. Stocking the correct insert designation and the matching holder reduces changeover complexity. For further specification checks or material-specific recommendations, technical consultation is available to ensure the insert aligns with process stability and productivity targets. Contact Metav Werkzeuge for a tailored recommendation on Tungaloy turning inserts and to arrange supply or technical consultation Technical data Article number: 6903185 Manufacturer SKU: TUN6903185 Label / SKU: 6903185-Tungaloy Manufacturer: Tungaloy Facts Insert designation: DNMG110404 ISO code: 110404 Cutting angle: 55° Corner radius: 0.4 mm Relief angle: 0° Thickness: 4.76 mm Size: 11 Special features Material: carbide Coating / grade: PVD-coated AH6225 Double-sided chipbreaker Rhombic plate format with cylindrical hole Application: turning Compatible with ISO turning holders FAQ What materials is this insert suited for? The DNMG110404 AH6225 insert is optimised for machining stainless steels; the PVD-coated AH6225 grade provides a stable cutting edge for medium-duty turning of such alloys. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker promotes controlled chip formation and evacuation, helping to maintain consistent cutting forces and surface finish during turning operations. Which holder characteristics determine compatibility with this insert? Compatibility is governed by plate form, relief angle (0°), tolerance class, fastening method, plate size and thickness; these must match the chosen ISO holder to ensure correct clamping. Is the corner radius suitable for finishing passes? With a 0.4 mm corner radius the insert offers a compromise for semi-finishing and finishing applications, enabling good surface quality while maintaining edge strength. What information is included on the label and article number? The article number 6903185 and manufacturer SKU TUN6903185 identify this DNMG110404 AH6225 Tungaloy insert for ordering and stock control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of a sharp yet robust cutting edge and ISO compatibility to maintain steady production when machining stainless steels; the combination of a PVD-coated carbide grade and a double-sided chipbreaker delivers dependable chip control and repeatable results — order via Metav Werkzeuge or request expert advice from our consultants. DNMG 110404 AH6225 Tungaloy indexable insert — PVD-coated carbide for turning, 55° rhombic form The DNMG110404 AH6225 is an ISO‑standard indexable turning insert designed for external and internal turning applications, optimised for stainless steel machining with a balance of sharpness and edge stability ISO rhombic DNMG geometry, 55° cutting angle PVD-coated carbide AH6225 for stainless steel Double-sided chipbreaker, cylindrical hole 0° clearance, 0.4 mm corner radius Consistent mid-range performance for stainless steel turning The combination of PVD-coated carbide and the AH6225 grade provides a balanced solution for machining stainless steel under varying conditions. The coating enhances resistance to heat and abrasion, while the substrate maintains a stable cutting edge, which reduces the frequency of interruptions for tool changes. For operations where reliable surface finish and predictable tool life are priorities, this insert offers measurable process stability and helps to maintain throughput. Simple integration within ISO tool systems As an ISO indexable insert, the plate fits holders and boring bars whose compatibility is determined by form, clearance, tolerance class, fastening, size and thickness. The rhombic DNMG geometry with a 55° cutting angle and a cylindrical hole allows straightforward mounting in common DNMG holders. This standardisation reduces setup time and simplifies tooling logistics for production lines that rely on repeatable, fast changeovers. Improved chip control and edge durability The double-sided chipbreaker design supports controlled chip formation across a range of feeds, aiding swarf evacuation and reducing built-up edge on the workpiece. The modest 0.4 mm corner radius softens engagement peaks to lower the risk of edge chipping during interrupted cuts, while the 0° clearance ensures predictable cutting mechanics. Together, these features contribute to a reliable machining process and consistent component quality. Practical application guidance for everyday turning This indexable insert is intended for general external and internal turning tasks where a universal grade is advantageous. Select the AH6225 grade and the appropriate chipbreaker variant according to workpiece material, machining stability and desired surface finish. The symmetrical, double‑edged design permits economical indexing, enabling continued use of the spare edge after rotation, which supports uninterrupted production in batch runs. Contact Metav Werkzeuge for tailored application support and to secure the DNMG110404 AH6225 inserts; our consultants provide pragmatic advice on holder compatibility, grade selection and stocking strategies Technical Data Article number: 6947109 Manufacturer article number: 6947109 Manufacturer SKU: TUN6947109 SKU: 6947109-Tungaloy Model series: ISO indexable turning inserts Designation: DNMG110404 AH6225 Facts Cutting angle: 55° Corner radius: 0.4 mm Clearance angle: 0° Plate thickness: 4.76 mm Inscribed circle / size: 11 mm Special features Material: carbide Coating: PVD-coated AH6225 Form: rhombic Hole: cylindrical hole (with hole) Chipbreaker: double-sided ISO designation: 110404 Type: DNMG FAQ Is this insert suitable for machining stainless steel? Yes. The DNMG110404 AH6225 is designed as a universal grade for stainless steel machining, with a PVD-coated carbide substrate tailored for a sharp but stable cutting edge. Can the insert be used for both external and internal turning? Yes. The rhombic DNMG form and cylindrical hole permit use in appropriate external holders and boring bars for internal turning where geometry and clamping suit the operation. How is holder compatibility ensured? Compatibility depends on insert form, clearance, tolerance class, fastening method, size and thickness; the ISO DNMG110404 designation simplifies selection of matching holders and toolholders. Does the insert offer indexable edges and chip control? Yes. The plate is double-sided with a chipbreaker on each edge, enabling indexing to a fresh cutting edge and improved chip control across a range of feeds. What advantages does the PVD coating provide? A PVD coating increases surface hardness and thermal resistance, which enhances wear performance and helps to maintain a sharp cutting edge during mid-range machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6235 carbide for stable chip control and extended tool life, combined with the 55° rhombic geometry and a 0° relief for versatile external and internal turning; order genuine inserts via Metav Werkzeuge or consult the technical team if advice is required. DNMG 110404 AH6235 Turning insert by Tungaloy — PVD-coated carbide, 55° rhombic geometry The DNMG110404 AH6235 is an ISO-standard turning insert intended for external and internal turning applications where interrupted cuts and machining of stainless steels demand a tougher grade and secure chip control PVD-coated carbide grade AH6235 Designed for stainless steel machining 55° rhombic geometry with 0° clearance Double-sided chipbreaker, cylindrical hole Consistent cutting performance for demanding stainless applications The PVD-coated AH6235 grade delivers a combination of toughness and wear resistance tailored for machining stainless steel and operations with elevated risk of chipping. The tougher substrate and coating chemistry reduce flank and crater wear in interrupted cuts, which results in fewer indexings and longer service intervals. This improves process stability and contributes directly to predictable cycle times and part quality, making the solution attractive for shops aiming to increase throughput without compromising surface finish. Geometry engineered for versatility and precision The 55° rhombic shape with a 0° clearance and a 0.4 mm corner radius provides an effective compromise between edge strength and form accuracy for both external turning and light internal operations. A thickness of 4.76 mm and an 11 mm inscribed circle ensure mechanical stability when paired with compatible ISO holders; the insert’s cylindrical hole facilitates secure clamping and accurate repeatability. Understanding holder compatibility by matching form, clearance, tolerance class, size and thickness is essential for achieving the expected dimensional results. Stable chip control and economical machining A double-sided chipbreaker combined with the AH6235 tempering promotes controlled chip formation across varying cutting parameters, supporting consistent surface quality and reduced risk of built-up edge. The PVD coating enhances edge integrity under thermal load, which is particularly beneficial where workpiece material or interrupted machining conditions cause fluctuating cutting forces. The result is improved tool life and a favourable cost-per-part balance, especially in batch production or mixed-series machining where reliability counts. For tailored application advice or to secure genuine Tungaloy inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and supply options Technical data Article number: 6903369 Manufacturer SKU: TUN6903369 Stock SKU: 6903369-Tungaloy Series: ISO turning inserts Application: Turning Facts ISO designation: DNMG110404 Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Diamond angle: 55° Hole: with cylindrical hole Special features Grade: AH6235, PVD-coated carbide Geometry: rhombic, double-sided chipbreaker Compatibility: ISO holders (form, size, thickness, tolerance) Typical use: interrupted cuts and stainless steel applications FAQ Which materials is this insert best suited for? The DNMG110404 AH6235 insert is optimised for stainless steel machining and performs well in interrupted cuts and situations with increased breakout risk. Is this geometry suitable for both external and internal turning? Yes. The 55° rhombic geometry and 0° relief enable both external and light internal turning when used with appropriate ISO-compatible holders. How does the chipbreaker design help in production? The double-sided chipbreaker on the insert promotes stable chip formation and efficient evacuation, which supports consistent surface finish and reduces the likelihood of tool edge damage. What are the key dimensional features to check before fitting? Check the insert’s 11 mm size, 4.76 mm thickness, 0.4 mm corner radius and the cylindrical hole; also verify holder form, clearance and tolerance class for correct compatibility — reference SKU TUN6903369 for exact match. Can the insert withstand interrupted cuts and variable cutting conditions? Yes. The tougher AH6235 grade, together with the PVD coating and robust geometry, is designed to cope with interrupted cuts and fluctuating loads while maintaining tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH8015 Wendeplatten - Tungaloy
Combine the wear resistance of the AH8015 PVD-coated grade with the 55° rhombic geometry and a 0.4 mm corner radius to achieve stable, productive turning of heat-resistant alloys; order the DNMG110404 turning insert directly via Metav Werkzeuge or ask the consultants for matching holders and setup guidance. DNMG 110404 AH8015 — Tungaloy turning insert for turning A DNMG110404 AH8015 indexable turning insert in PVD-coated cemented carbide, designed for general turning of heat‑resistant alloys and adaptable to standard ISO turning holders PVD-coated carbide for heat-resistant alloys 55° rhombic geometry for versatile turning 0° clearance angle for stable cutting Double-sided chipbreaker with cylindrical hole Increased productivity on heat‑resistant alloys The AH8015 grade is a PVD-coated cemented carbide selected to balance wear resistance and edge stability, making it a first choice for machining heat‑resistant alloys. The coating promotes longer tool life under elevated temperatures, while the substrate keeps the cutting edge robust during interrupted cuts. When mounted in a suitable holder, the insert enables reduced tool change frequency and consistent surface finish, which directly contributes to higher process throughput and lower machining cost per component. Reliable compatibility and secure clamping Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic DNMG family follows ISO standards for indexable inserts, so the insert fits conventional holders designed for the DNMG form. The cylindrical hole and standard fixing geometry simplify replacement and ensure repeatable seating. Choosing a holder matched to the insert’s geometry ensures correct rake and feed orientation, which stabilises cutting forces and reduces chatter during both external and internal turning operations. Durable edge performance and chip control The combination of the grade and the double-sided chipbreaker provides controlled chip formation for a range of feeds and depths of cut, improving evacuation and reducing secondary machining. The 0° clearance angle contributes to a stable contact area at the flank, enhancing edge life in heavy cuts, while the 0.4 mm corner radius balances edge strength with achievable surface quality. These features together reduce the frequency of edge failure and maintain consistent dimensional accuracy across production batches. Fast integration into existing production With an inscribed circle size of 11 mm and a thickness of 4.76 mm, the insert is straightforward to specify when ordering replacements or building a new tooling set. The ISO‑standard series simplifies procurement and inventory management, and the reversible, double‑sided design delivers economical cutting edge utilisation. For shops that require straightforward setup, the standardised geometry and hole style support rapid installation, minimising machine downtime and accelerating return to full productivity. Contact Metav Werkzeuge for tailored application advice and to order the DNMG110404 AH8015 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947081 SKU: 6947081-Tungaloy Manufacturer SKU: TUN6947081 Material: cemented carbide Grade/coating: AH8015, PVD-coated Series: ISO-standard indexable turning inserts Shape: rhombic (DNMG) Application: turning (external and internal) Core data Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Features and applications PVD-coated cemented carbide for heat-resistant alloys ISO DNMG form for compatibility with standard holders Double-sided indexable design for economical edge usage Optimised chipbreaker for controlled chip formation Suitable for general turning applications requiring edge stability FAQ What materials is this insert best suited for? The DNMG110404 AH8015 insert is engineered for heat‑resistant alloys, offering a balance of wear resistance and edge stability ideal for those materials. Will the insert fit existing DNMG holders? Yes, the insert follows ISO DNMG form and fits holders specified for DNMG geometry, provided the holder matches the size, thickness and fixing type. How many usable cutting edges does the insert provide? As a double‑sided indexable insert, the DNMG110404 AH8015 offers multiple turning edges; flipping and indexing extend usable life before disposal. What does the 0° clearance angle mean in practice? A 0° clearance angle gives a larger flank contact area for improved stability in heavy cuts, helping maintain dimensional accuracy and prolong edge life. Is the DNMG110404 AH8015 supplied with spare screws or mounting hardware? The insert is a standard indexable cutting insert; matching clamps, pads and screws should be specified separately to ensure correct holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the ISO-standard geometry and the PVD-coated AH8015 carbide grade for reliable turning of heat-resistant alloys; the rhombic 55° form with a 0.4 mm corner radius ensures stable cutting performance and predictable chip control. Order directly via Metav Werkzeuge or request expert advice from their consultants for application-specific setup. DNMG110404 AH8015 ISO turning insert by Tungaloy — PVD-coated carbide for heat-resistant alloys A DNMG110404 AH8015 indexable insert designed for general-purpose external and internal turning, offering a balanced compromise between wear resistance and cutting-edge stability in demanding alloy machining. ISO-standard DNMG110404 insert PVD-coated AH8015 carbide for heat-resistant alloys Rhombic 55° form with 0° clearance Cylindrical hole, double-sided chipbreaker Stable performance for general turning operations The DNMG-style indexable insert delivers consistent results in routine and demanding turning tasks. With a PVD-coated AH8015 carbide substrate, the insert is optimised for machining heat-resistant alloys where a careful balance between wear resistance and edge stability is required. The coating adds surface hardness and temperature tolerance, which translates into longer intervals between insert changes and fewer unplanned stoppages, improving process efficiency and overall machining economy. Geometry that simplifies toolholder selection and setup The rhombic 55° geometry with 0° clearance provides a versatile cutting angle suitable for a wide range of turning contours and profiles. The 0.4 mm radius supports robust edge life while maintaining good surface finish on turned components. Compatibility with a chosen toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness — the ISO specification ensures interchangeability across compliant external holders and boring bars, easing inventory and setup procedures. Coating and grade benefits explained for production planning The combination of PVD-coated surface and the AH8015 grade provides a tailored performance profile: improved heat resistance, predictable flank wear, and durable cutting edges. This makes the insert a pragmatic choice where moderate cutting forces and elevated temperatures occur, for instance when machining high-temperature alloys. Selecting a matching chipbreaker suited to the operation preserves edge geometry and supports consistent chip formation, reducing the risk of built-up edge and facilitating chip evacuation. System integration, handling and application advantages As part of the ISO-indexable insert system, the component integrates with matching holders, a shim or clamping set and replacement screws to form a complete cutting solution. The rhombic plate with a cylindrical hole and double-sided chipbreaker enables reversible indexing and efficient use of insert flanks, lowering per-edge costs. For production teams, this means fewer tool changes, straightforward stocking of spare parts and reliable repeatability in serial turning tasks. Contact Metav Werkzeuge for assistance specifying Tungaloy inserts and optimising setup for AH8015 applications; technical advisers are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss holder compatibility and machining parameters Technical data Article number: 6793725 Manufacturer SKU: TUN6793725 Manufacturer article number: 6793725 Series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: DNMG110404 Insert size: 11 Thickness: 4.76 mm Corner radius: 0.4 mm Lead/approach angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Special features PVD-coated carbide grade AH8015 Rhombic plate form Double-sided chipbreaker Cylindrical hole for secure clamping ISO-standard compatibility Intended application: turning (external and internal) System: insert, matching holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The AH8015 grade and PVD coating make the DNMG110404 insert suitable as a first choice for machining heat-resistant alloys, offering balanced wear resistance and edge stability. How does the insert fit into existing toolholders? Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness; the ISO standard designation DNMG110404 ensures interchangeability with compatible external holders and boring bars. What are the key geometric specifications to check before setup? Important dimensions are the 55° rhombic form, 0° clearance angle, 0.4 mm corner radius and 4.76 mm plate thickness; the plate also features a cylindrical hole for clamping. Is the cutting edge reversible or single-use? The insert has a double-sided chipbreaker and is indexable, allowing use of multiple cutting edges through rotation or flipping according to the holder design. Which SKU identifies this specific item for ordering? The product is listed under SKU 6793725-Tungaloy and the manufacturer SKU TUN6793725. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com