DNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8015, a 55° rhombic DNMG geometry and a double‑sided chipbreaker for consistent, productive turning of heat‑resistant alloys; order directly via Metav Werkzeuge or consult our technical team for application support. DNMG110404 AH8015 indexable turning insert — PVD‑coated carbide, 55° rhombic, Tungaloy The DNMG110404 AH8015 is an ISO‑standard indexable turning insert engineered for general turning of heat‑resistant alloys and a wide range of engineering materials. ISO‑standard DNMG geometry PVD‑coated carbide grade AH8015 55° rhombic shape, 0° clearance angle Double‑sided chipbreaker, cylindrical hole Reliable cutting for demanding alloys The combination of a PVD‑coated carbide substrate and the AH8015 grade provides a balanced performance between wear resistance and edge stability, making this insert particularly suited to the machining of heat‑resistant alloys. The thin, hard PVD coating reduces adhesive wear and improves surface finish, while the carbide core maintains toughness under interrupted cuts. This balance results in steadier cutting forces and fewer unplanned tool changes, supporting higher process reliability in serial production. Stable clamping and predictable geometry for accurate turning The rhombic DNMG form with a 55° main cutting angle and a 0° clearance angle ensures compatibility with a wide range of external holders and boring bars. The insert’s cylindrical hole allows secure fastening in standard clamping systems; compatibility is governed by shape, clearance angle, tolerance class, clamping method, size and thickness. Correct matching of holder and insert reduces vibration and run‑out, which directly improves dimensional accuracy and surface integrity during both external and internal turning. Efficient machining and lower operating costs A double‑sided chipbreaker design enables the use of both cutting edges, extending tool life per insert and reducing tooling costs for batch production. The AH8015 grade is optimised for productive chip control across varied cutting conditions, helping to maintain stable cutting zones and fewer interruptions for chip management. In practice this translates into shorter cycle times and more predictable tool replacement intervals, supporting cost‑effective machining strategies without compromising component quality. Straightforward handling, indexing and application choice Indexing the insert to present a fresh cutting edge is quick and reliable, thanks to the standardised ISO format and secure hole clamping. For users unfamiliar with coating technology: PVD (physical vapour deposition) applies a very thin, adherent hard layer to the carbide substrate, enhancing wear resistance without significantly reducing toughness. Selection advice — choose the AH8015 grade and the double‑sided chipbreaker when machining heat‑resistant alloys or mixed batches that demand a compromise between durability and edge strength. For high‑temperature alloy turning rely on Tungaloy quality — contact Metav Werkzeuge for tailored application advice or sample recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947131 SKU: 6947131-Tungaloy Manufacturer SKU: TUN6947131 Core specifications ISO designation: DNMG110404 Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Main cutting angle: 55° Clearance angle: 0° Hole style: cylindrical hole Materials & special features Substrate: carbide Coating: PVD Grade: AH8015 — for heat‑resistant alloys, balanced wear and edge stability Shape: rhombic (DNMG) Chip control: double‑sided chipbreaker Typical system: insert + external holder/boring bar + shim/clamping set + replacement screw Application: turning (external and internal) FAQ What materials is this insert intended for? The DNMG110404 AH8015 Tungaloy indexable turning insert (SKU: 6947131‑Tungaloy) is primarily intended for heat‑resistant alloys and general engineering materials where a balance of wear resistance and edge stability is required. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole and standard ISO clamping systems; secure fastening depends on matching the insert shape, tolerance class, size and thickness to the holder. Can both sides of the insert be used? Yes, the insert features a double‑sided chipbreaker allowing both cutting edges to be indexed and used, which extends the service life per insert. What does the AH8015 grade offer compared with other grades? The AH8015 grade is a PVD‑coated carbide formulation optimised for good wear resistance combined with stable cutting edges, making it a first choice for machining heat‑resistant alloys under varied cutting conditions. Is the insert suitable for internal boring as well as external turning? The DNMG geometry and the insert’s dimensions make it suitable for both external and internal turning operations, provided the correct holder and clamping arrangement are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 carbide for a balanced mix of wear resistance and edge stability, together with the DNMG110404 rhombic geometry and secure cylindrical-hole clamping for predictable turning performance. Order the DNMG110404 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or consult our team for application advice. DNMG110404 AH8015 Turning Insert (ISO indexable, 55° rhombic) – Tungaloy The DNMG110404 AH8015 Tungaloy turning insert is an ISO rhombic, 55° indexable insert designed for general external and internal turning of heat-resistant alloys. PVD-coated carbide grade AH8015 ISO DNMG 110404 rhombic geometry 55° approach angle for versatile turning Double-sided chipbreaker for stable cuts Cylindrical hole for secure clamping High-performance cutting of heat-resistant alloys The insert is supplied in a PVD-coated carbide grade AH8015, engineered as a first choice for machining heat-resistant alloys. The coating increases surface hardness and reduces built-up edge, while the substrate carbide provides the base wear resistance and edge stability required for continuous turning operations. This combination delivers a predictable cutting behaviour that helps maintain cycle times and surface finish under elevated temperatures. The 55° geometry contributes to a favourable balance between strength at the cutting edge and accessibility for external and internal turning. Designed for compatibility and secure clamping Compatibility with toolholders follows ISO conventions: form, clearance angle 0°, tolerance class, fastening style, size and thickness determine correct seating. The rhombic DNMG shape and the cylindrical hole ensure reliable mechanical location and clamping when used with matched holders or boring bars. The insert’s double-sided chipbreaker allows indexable reuse of the cutting edges, reducing tooling change frequency and improving cost-efficiency in production environments. For users unfamiliar with insert codes: the ISO designation “110404” denotes the size and geometry parameters relevant for holder selection. Process stability, tool life and selection guidance Selecting the correct chipbreaker and grade is key for stable metal removal; the AH8015 grade is balanced between abrasion resistance and edge robustness, making it suitable where thermal loads are significant. The rhombic form supports varied operations while the 0° clearance can be advantageous in controlled setups that demand tight dimensional conformity. Pairing the insert with a holder matched to the DNMG profile ensures secure seating and repeatable results. For complex material mixes or high-volume production, technical consultation can help specify optimal cutting data and holder combinations to extend life and reduce scrap. Contact Metav Werkzeuge for tailored application advice and to request the DNMG110404 AH8015 Tungaloy turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966136 Manufacturer SKU: TUN6966136 Model series: ISO-Drehwendeschneidplatten Material: Carbide Numeric specifications ISO designation: 110404 Approach angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Features & design Rhombic (DNMG) plate form PVD-coated carbide grade AH8015 Double-sided chipbreaker Cylindrical hole for clamping Suitable for external and internal turning ISO-indexable insert FAQ What materials is this insert intended for? The DNMG110404 AH8015 Tungaloy turning insert is specified as a first choice for machining heat-resistant alloys, where a balance of wear resistance and cutting-edge stability is required. Is the DNMG110404 compatible with standard DNMG holders? Yes, the insert follows the ISO DNMG form and is compatible with holders sized for 110404 inserts; correct compatibility depends on matching form, clearance angle, tolerance class, fastening and thickness. What does the AH8015 grade mean in practice? AH8015 denotes a PVD-coated carbide grade offering a compromise between abrasion resistance and edge stability, suitable for elevated-temperature applications common with heat-resistant alloys. Can the insert be indexed to use multiple cutting edges? The DNMG110404 is double-sided with an indexable geometry; rotating the insert to a fresh edge extends usable life and reduces tooling costs compared with single-use alternatives. Does the rhombic 55° geometry suit internal turning? Yes, the 55° rhombic geometry is suitable for both external and internal turning operations, provided the holder and setup allow the required approach and clearance angles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH8015 Wendeplatten - Tungaloy
The combination of PVD‑coated carbide AH8015 and the ISO DNMG110404 geometry guarantees stable cutting performance and reliable chip control, making the insert a solid choice for machining heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. DNMG 110404 AH8015 — Indexable turning insert for Turning — Tungaloy The DNMG110404 AH8015 is an ISO rhombic indexable insert designed for external and internal turning, optimised for heat‑resistant alloys and general precision turning applications PVD-coated carbide grade AH8015 Double-sided chipbreaker for consistent chips 0° clearance for stable cutting geometry Rhombic form, cylindrical hole for secure clamping Consistent performance for heat‑resistant alloys The PVD‑coated AH8015 grade combines balanced wear resistance and edge stability to deliver predictable performance when machining heat‑resistant alloys. As a PVD‑coated carbide substrate, the insert maintains cutting capability at elevated temperatures and provides a compromise between tool life and toughness. This results in fewer insert changes and steadier process windows during medium to heavy turning operations, supporting higher machine utilisation and reduced downtime. Straightforward integration into existing turning systems Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert is supplied in the ISO DNMG format to match common holder geometries. The indexable component integrates with a standard external holder or a boring bar, plus a shim/clamp set and replacement screws for secure fixation. The presence of a cylindrical hole simplifies clamping alignment and secures the insert against rotational forces, ensuring repeatable seating and consistent cutting engagement across repeated indexings. Geometry that supports chip control and surface finish The rhombic shape with a 55° lead angle provides favourable entry geometry for turning, while the double-sided chipbreaker promotes reliable chip control across a range of cutting conditions. The 0° clearance specification helps preserve a stable cutting edge orientation, which is beneficial when working with challenging alloys where chatter or deflection might otherwise compromise surface quality. Together, these geometric features reduce the risk of built‑up edge and support the achievement of consistent component tolerances. Practical recommendations for selection and use For external and internal turning, match the chipbreaker and AH8015 grade to the workpiece material and machining strategy: select the insert for heat‑resistant alloys when a balance of wear resistance and edge stability is required. Where higher impact resistance is needed, consider alternative grades; where surface finish is the priority, fine‑feed parameters combined with the DNMG geometry often produce superior results. The system approach — insert, compatible holders and correct clamping — allows for predictable tool life and efficient set‑ups. Contact Metav Werkzeuge for tailored advice on matching holders and selecting the optimum AH8015 grade insert for specific turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical requirements and availability Technical data Article number: 6966162 SKU (manufacturer): TUN6966162 Seller SKU: 6966162-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Grade: AH8015 Substrate/material: carbide Application: Turning Core dimensions Insert designation: DNMG110404 ISO code: 110404 Insert size: 11 Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Lead/approach angle: 55° Design & features Rhombic plate form With hole — cylindrical hole style Double-sided chipbreaker PVD-coated carbide grade AH8015 Compatible with standard DNMG external holders and boring bars FAQ What materials is the DNMG110404 AH8015 best suited for? The DNMG110404 AH8015 insert is formulated for machining heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability suitable for many high‑temperature nickel and cobalt‑based alloys. How does the 0° clearance affect cutting behaviour? A 0° clearance on the DNMG110404 helps maintain a stable cutting geometry, reducing deflection and supporting consistent surface finish when paired with the appropriate holder and cutting parameters. Is the insert reversible or single‑sided? The DNMG110404 AH8015 is a double‑sided indexable insert with a double‑sided chipbreaker design, allowing both edges to be used and extending the effective tool life before replacement. Which holder types are compatible with this insert? Compatibility is determined by form, size, thickness and fastening; the ISO DNMG format fits standard DNMG external holders and boring bars when the holder matches the insert’s geometry and tolerance class. What advantages does the PVD coating on AH8015 provide? The PVD coating on the AH8015 grade improves wear resistance and thermal stability at elevated cutting temperatures, resulting in longer, more predictable tool life during continuous turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated carbide wear resistance and a double-sided chipbreaker for consistent productivity in turning operations; the ISO rhombic geometry and cylindrical-hole fixing enable straightforward integration into standard holders. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG 110404 AH8015 Turning Insert for Turning — Tungaloy DNMG110404 AH8015 is an ISO‑standard rhombic turning insert designed for general turning of heat‑resistant alloys and compatible ISO holders ISO-standard rhombic insert, 55° geometry PVD-coated carbide for heat-resistant alloys Double-sided chipbreaker for stable chip control Cylindrical-hole design, 4.76 mm thickness Optimised performance for heat‑resistant alloys and mixed production The PVD-coated carbide grade AH8015 delivers a balanced combination of wear resistance and edge stability, making the insert well suited to the demanding conditions of turning heat‑resistant alloys. The 55° rhombic geometry provides a versatile engagement angle that supports both finishing and semi‑roughing passes, while the corner radius 0.4 mm helps achieve a stable cutting edge and predictable tool life. Compatibility with ISO holders is determined by form, clearance, tolerance class, fastening and thickness, ensuring a reliable fit when the correct clamping set and screws are used. Stable chip control and surface quality through adapted geometry Chip formation and evacuation are controlled by the double-sided chipbreaker, which is designed to produce manageable chips across a range of cutting parameters. The combination of the chipbreaker and the PVD coating reduces built-up edge and improves consistency of the machined surface, resulting in fewer reworks and higher first‑pass yields. The 0° clearance angle and the rhombic shape help to reduce cutting forces on interrupted cuts, giving a more consistent surface finish and dimensional stability in both external and internal turning operations. Practical system advantages for workshop efficiency As an ISO indexable insert, the DNMG110404 AH8015 integrates into a standard system composed of the insert, a matching external holder or boring bar, a backing/shim and the appropriate clamp set with replacement screws. The cylindrical locating hole facilitates secure fastening and repeatable positioning, while the 4.76 mm plate thickness contributes to cutting stiffness and stability in turning. The reversible, double‑sided design extends effective cutting edges per insert, reducing tooling change frequency and supporting uninterrupted production runs. For application advice and supply of genuine Tungaloy DNMG110404 AH8015 inserts, contact Metav Werkzeuge for personalised recommendations and rapid fulfilment via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6947167 SKU: 6947167-Tungaloy Manufacturer SKU: TUN6947167 Type designation: DNMG110404 AH8015 Model series: ISO indexable turning inserts Material: Carbide Coating: PVD-coated Core figures Insert size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Geometry angle: 55° Special features Rhombic plate form Cylindrical locating hole Double-sided chipbreaker Suitable for external and internal turning Grade AH8015 optimised for heat-resistant alloys Compatible with ISO holders and standard clamping sets FAQ What materials is this insert suited for? The DNMG110404 AH8015 insert is specified for turning heat‑resistant alloys and provides a balanced performance between wear resistance and edge stability for such materials. How is the insert fixed in the holder? The insert features a cylindrical locating hole and is secured by the appropriate clamp set and screws; compatibility depends on holder form, clearance and tolerance class. Can the insert be indexed to use multiple edges? Yes, the rhombic, double‑sided design allows indexing to fresh cutting edges, extending service life per insert and reducing changeover frequency. What benefit does the PVD coating provide? The PVD coating enhances surface hardness and reduces adhesion, improving chip control and wear resistance under elevated cutting temperatures. Is this insert suitable for internal boring as well as external turning? The geometry and grade of the insert support both external and internal turning when paired with the correct boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 AH8015 Wendeplatten - Tungaloy
Benefit from a highly productive combination of PVD-coated carbide AH8015 and a 55° rhombic geometry that balances wear resistance and cutting-edge stability for machining heat‑resistant alloys; the double‑sided chipbreaker and 0.4 mm nose radius ensure reliable chip control and fine finishes. Order the DNMG110404 AH8015 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110404 AH8015 — Tungaloy indexable turning insert, PVD‑coated carbide, 55° rhombic The DNMG110404 AH8015 is an ISO indexable turning insert designed for external and internal turning, offering a balanced grade for heat‑resistant alloys and robust performance in general turning tasks. PVD-coated carbide AH8015 for heat-resistant alloys 55° rhombic geometry for versatile turning Double-sided chipbreaker for stable chip control 0.4 mm nose radius for accurate finishing Higher uptime through a balanced cutting grade and coating The combination of a PVD‑coated carbide substrate and the AH8015 grade provides a measured balance between wear resistance and edge stability. This makes the insert particularly suitable for machining heat‑resistant alloys, where temperature and abrasion challenge tool life. The coating reduces built‑up edge and promotes consistent cutting performance over repetitive cycles, which translates into fewer tool changes and improved process economy. As a result, machining routines can be planned with greater confidence in cutting times and maintenance intervals. Reliable chip control and consistent surface quality Equipped with a double‑sided chipbreaker and a 0.4 mm nose radius, the insert ensures controlled chip formation and predictable surface finish even in interrupted cuts. The chipbreaker geometry directs chips away from the cutting zone, reducing the risk of re‑cutting and stabilising cutting forces. The modest nose radius supports fine finishing operations without excessive feed sensitivity, yielding consistent part quality and reducing downstream polishing or rework. ISO compatibility and secure mounting for shop flexibility Manufactured to ISO dimensions, the insert fits standard holders when matched by form, clearance angle, tolerance class, fastening method, size and thickness. Key measurable attributes — such as a 4.76 mm plate thickness, 11 mm inscribed circle, 0° clearance angle and a cylindrical hole for secure clamping — ensure straightforward integration into existing tool systems. A complete system comprises the insert, a suitable external holder or boring bar, a backing shim/clamp set and replacement screws; this modular approach simplifies inventory and toolroom logistics while maintaining repeatable positioning accuracy. Practical advantages on the shop floor Designed for both external and internal turning, the insert allows shops to standardise on a single geometry and grade for a wide range of tasks, reducing tool changeovers and stock complexity. The balanced AH8015 grade supports machining under varying stability conditions: select the chipbreaker and insert orientation according to material, cut depth and rigidity to optimise productivity. The net effect is a reduction in cycle time variability and a smoother production flow, backed by the predictable behaviour of a PVD‑coated carbide solution. Contact Metav Werkzeuge for tailored application advice and to secure genuine Tungaloy DNMG110404 AH8015 indexable inserts; technical consultants are available to recommend the ideal chipbreaker and holder combination for specific materials and operations. Technical Data Article number: 6793731 Manufacturer SKU: TUN6793731 Model series: ISO turning indexable inserts Designation: DNMG110404 AH8015 Material: carbide Coating / grade: AH8015 Facts Inscribed circle: 11 mm Plate thickness: 4.76 mm Cutting angle: 55° Clearance (relief) angle: 0° Nose radius: 0.4 mm Hole: with cylindrical hole Special features PVD‑coated carbide grade for heat‑resistant alloys Rhombic plate form, ISO DNMG Double‑sided chipbreaker Suitable for external and internal turning System use: insert, holder/boring bar, backing/clamp set, screws FAQ What materials is this insert suited for? The DNMG110404 AH8015 insert is optimised for machining heat‑resistant alloys; the PVD‑coated carbide grade delivers balanced wear resistance and edge stability for such materials. How does the chipbreaker affect performance? The double‑sided chipbreaker on the DNMG110404 AH8015 promotes stable chip formation and evacuation, improving surface finish and reducing the likelihood of re‑cutting. Will this ISO insert fit existing holders? Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the ISO DNMG dimensions of this insert facilitate mounting in standard holders when those parameters match. What finishing quality can be expected with a 0.4 mm nose radius? A 0.4 mm nose radius provides a balance between fine surface finish and robustness; the DNMG110404 AH8015 supports accurate finishing while maintaining acceptable edge strength. Is the insert reversible or indexable? The insert is double‑sided and indexable, allowing rotation or indexing to present a fresh cutting edge and extend the effective tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110404 AT9530 Wendeplatten - Tungaloy
Reliable finishing and consistent wear resistance come together in this coated cermet grade. The combination of AT9530 coating, a 55° rhombic geometry and a 0.4 mm corner radius delivers improved surface quality and steady performance in turning. Order the DNMG110404 AT9530 insert via Metav Werkzeuge or consult our advisers for application guidance. DNMG 110404 AT9530 – ISO turning insert, coated cermet, 55° geometry (Tungaloy) The DNMG110404 AT9530 is an ISO-standard indexable turning insert intended for finishing and light turning of steel, designed to improve surface finish while providing controlled, even wear. Coated cermet grade AT9530 for fine finishing 55° rhombic DNMG geometry 0.4 mm corner radius for tight tolerances Double-sided insert with cylindrical hole High-quality finishing with a coated cermet grade The coated cermet composition of this insert focuses on delivering a superior surface finish and uniform wear behaviour during finishing passes. Cermet grades like AT9530 combine ceramic and metallic properties to maintain edge integrity at low to moderate cutting temperatures, which supports consistent part quality in external and internal turning. For operations where optical or dimensional surface quality is critical, the material combination reduces built-up edge and helps to preserve a stable cutting edge over repeated cycles, lowering the need for premature index changes. Geometry and dimensions that create process stability A rhombic DNMG form with 55° geometry and a 0.4 mm radius gives a balance between strength and sharpness, suitable for light machining where close tolerances are required. The insert is double-sided, includes a cylindrical hole for positive clamping, and measures 11 mm across with a plate thickness of 4.76 mm, ensuring compatibility with standard ISO holders when form, relief angle and tolerance class are matched. Compatibility depends on matching the holder by shape, relief angle, tolerance class, fastening method, size and thickness, which secures repeatable seating and consistent chip control. Practical advantages and application guidance for turning steel Designed for finishing and light machining of steel, this insert supports predictable tool life and stable part finish when paired with the appropriate chipbreaker and machining parameters. The double-sided design increases usable edges per insert, while the AT9530 coating promotes even wear, easing process monitoring and inventory rotation. For best results, match the chipbreaker style to the material and rigidity of the setup; the right combination reduces vibration and improves surface integrity. When exact process windows or alternative grades are required, technical consultation is available to optimise cutting data and holder selection. Contact Metav Werkzeuge to discuss suitability and availability of the Tungaloy DNMG110404 AT9530 turning insert and to request tailored application advice from our technical team at Metav Werkzeuge. Technical data Article number: 6773695 Manufacturer SKU: TUN6773695 Model series: ISO-Drehwendeschneidplatten Designation: DNMG110404 Name: DNMG110404 AT9530 Tungaloy insert Core data Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Features and materials Grade/coating: AT9530 Substrate: carbide Chipbreaker: double-sided Hole style: cylindrical hole Application: turning (finishing and light machining of steel) Compatibility: ISO-standard insert; holder compatibility depends on form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert designed for? The DNMG110404 AT9530 insert is specified for finishing and light machining of steel, with the AT9530 cermet grade optimised for consistent surface quality. How does the 55° geometry affect performance? The 55° rhombic geometry provides a compromise between edge strength and cutting sharpness, enabling controlled finishing cuts while maintaining stability. Which chipbreaker should be chosen for this insert? Select the chipbreaker style to match the workpiece material and the rigidity of the setup; the DNMG form in this grade performs best with a breaker suited to steel finishing and light cuts. How is holder compatibility ensured for the insert? Compatibility is achieved by matching the insert form, relief angle, tolerance class, fastening method, size and thickness with the external holder or boring bar used in the setup. What identification helps when ordering replacements? Use the manufacturer article number 6773695 or the manufacturer SKU TUN6773695 to ensure correct supply of the DNMG110404 AT9530 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of GT9530's wear-resistant coated cermet and the precise DNMG110404 geometry to achieve consistent finishing and extended tool life; order the insert via Metav Werkzeuge or consult our specialists for application support. DNMG110404 GT9530 Tungaloy turning insert – Coated cermet grade, 0.4 mm corner radius A DNMG110404 GT9530 turning insert designed for finishing and light universal turning of steel with ISO compatibility DNMG110404 rhombic 55° geometry GT9530 coated cermet for wear resistance 0.4 mm corner radius for fine surface finishing Double-sided insert with cylindrical hole Precision finishing and extended tool life through material and geometry The combination of a coated cermet grade and a rhombic 55° geometry delivers a balance between surface quality and tool life. The GT9530 grade is formulated for wear-resistant finishing to light universal turning of steel, giving improved edge stability under steady machining conditions. The modest 0.4 mm corner radius supports fine surface finishes without excessive cutting forces, while the insert’s profile keeps chip formation predictable, which helps to reduce rework and downtime. Predictable machining performance and process efficiency Designed for ISO holders and standard tool systems, the insert enables consistent cycle times in both external and internal turning operations. The double-sided configuration and cylindrical hole allow economical indexing and secure clamping, reducing changeover frequency and tool inventory. Because compatibility with the holder depends on form, clearance, tolerance class, fastening and thickness, the insert integrates smoothly into existing setups when matched correctly, supporting efficient and repeatable production. Simple selection and application guidance for production use Selection should focus on matching the GT9530 chipbreaker and grade to material, cutting mode and machine stability. In stable conditions the coated cermet excels for finishing and light machining of steel, offering a reliable surface quality advantage. The ISO-standard naming and dimensions simplify replacement and procurement, while the insert’s construction supports predictable tool life, which aids in planning tool-change intervals and reduces unexpected stoppages. Suitability and benefits for workshop and production environments This indexable turning insert is intended for turning operations where good surface finish and longer tool life are required under consistent conditions. The carbide base (as specified) together with the coated cermet grade delivers resistance to flank wear and a smooth machined surface. For many manufacturers, that translates into fewer reworks, steadier part quality and better overall process reliability—advantages that contribute directly to productivity and cost-efficiency in batch and series production. For high-quality finishing with the Tungaloy GT9530 grade, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6797218 SKU: 6797218-Tungaloy Manufacturer SKU: TUN6797218 Manufacturer: Tungaloy Model series: ISO turning inserts ISO designation: 110404 Designation: DNMG110404 Grade: GT9530 Core specifications Corner radius: 0.4 mm Insert angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole for secure clamping Coated cermet grade GT9530 Material base: carbide Application: turning (external and internal) ISO-standard plate for compatibility with matching holders FAQ Which materials is this insert optimised for? The DNMG110404 GT9530 turning insert by Tungaloy (SKU 6797218-Tungaloy) is optimised for machining steel, delivering wear-resistant finishing and light universal turning performance. What is the corner radius and how does it affect the finish? The insert has a 0.4 mm corner radius; this supports fine surface finishes with moderate cutting forces, making it suitable for finishing passes. Is the insert indexable and how many usable edges are there? The plate is double-sided with a cylindrical hole, allowing indexing of multiple edges depending on the holder arrangement and clamping method. Which holders are compatible with this ISO plate? Compatibility requires a holder that matches the plate’s form, clearance angle, tolerance class, fastening style, size and thickness; the ISO designation simplifies selecting a suitable external holder or boring bar. What chipbreaker is integrated and for which conditions is it intended? This insert features a double-sided chipbreaker designed for stable machining conditions; select the chipbreaker and grade to fit the material, cutting mode and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 GT9530 Wendeplatten - Tungaloy
DNMG110404 GT9530 Wendeplatte für Drehen – Tungaloy Die DNMG110404 GT9530 Wendeplatte ist eine ISO-genormte, rhombische Wendeschneidplatte für präzises Außen- und Innendrehen bei stabilen Schlichtbedingungen ISO-genormte rhombische Wendeplatte Beschichtetes Cermet GT9530 für feine Oberfläche Doppelseitiger Spanbrecher für konstante Spanform Zylindrisches Loch für Standardhalterkompatibilität Hohe Standzeit durch beschichtetes Cermet Die beschichtete Cermet-Sorte GT9530 verbindet die Härte von Hartmetall mit gleitfähigen Schichteigenschaften und sorgt so für eine höhere Standzeit bei Schlichtoperationen. Durch die stabile Schneidkante entsteht eine gleichmäßige Oberfläche, die Nachbearbeitung reduziert. Anwender profitieren von weniger Werkzeugwechseln und konstanter Teilequalität bei stabilen Halter- und Aufspannbedingungen. Präzision und Kompatibilität im Drehprozess Die rhombische Plattenform mit Eckenradius 0,4 mm und genormter Aufnahme macht die Platte besonders geeignet für genaue Längs- und Querdrehzyklen. Der Freiwinkel 0° und das zylindrische Loch ermöglichen eine sichere Befestigung im klassischen Außenhalter. Das Resultat ist reproduzierbare Präzision bei Serien- und Einzelteilfertigung und eine einfache Integration in vorhandene Vorrichtungen. Wirtschaftlichkeit durch doppelseitigen Einsatz Die doppelseitige Konstruktion und robustes Hartmetall-Substrat erlauben mehrfachen Einsatz der Schneidkante, was die Stückkosten senkt. In Kombination mit der GT9530-Beschichtung reduziert sich der Verschleiß unter stabilen Schnittbedingungen, wodurch Rüstzeiten und Werkzeugverbrauch sinken. Das macht die Platte besonders interessant für Betriebe mit mittleren bis hohen Losgrößen. Zielgruppe und typische Anwendungen Entwickelt für Zerspanungsunternehmen und Werkstätten, die hohe Oberflächengüte beim Schlichten verlangen. Geeignet für Bearbeitung von Stahl unter stabilen Aufspannbedingungen; die Sorte empfiehlt sich für Außen- und Innendrehen, wenn Prozesssicherheit und Wiederholgenauigkeit im Vordergrund stehen. Produktspezifisch ist die Platte ideal für Anwender, die langlebige und planbare Werkzeuge suchen. Empfehlung: Die GT9530-Wendeplatte von Tungaloy eignet sich besonders für wirtschaftliche Schlichtbearbeitung; bei Fragen zur individuellen Anwendung kontaktieren Sie bitte unseren technischen Vertrieb per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 6998083 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller-SKU: TUN6998083 Fakten Radius: 0,4 mm Plattendicke: 4,76 mm Plattengröße: 11 mm Winkel: 55° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: GT9530 (beschichtetes Cermet) Plattenform: rhombisch Spanbrecher: doppelseitig Loch: mit Loch (zylindrisches Loch) Einsatz: Drehen Norm: ISO (genormte Wendeschneidplatten) FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die DNMG110404 GT9530 Wendeplatte von Tungaloy ist primär für die Bearbeitung von Stahl ausgelegt und liefert bei Schlichtoperationen eine sehr gute Oberfläche. Wie wird die Platte im Halter befestigt? Die rhombische Form mit zylindrischem Loch passt zu Standard-Außenhaltern; Freiwinkel 0° und die ISO-Geometrie sorgen für sichere Befestigung und Wiederholgenauigkeit. Wie oft kann die Schneide genutzt werden? Dank der doppelseitigen Ausführung und der beschichteten GT9530-Sorte lässt sich die Schneide mehrfach nutzen, wodurch sich die Wirtschaftlichkeit gegenüber einseitigen Platten erhöht. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die Platte ist für Außen- und Innendrehen geeignet; die Geometrie und Beschichtung sind auf Schlicht- bis leichte Universalbearbeitung ausgelegt. Welche Artikelnummer und SKU hat das Produkt? Die Artikelnummer lautet 6998083 und die Hersteller-SKU ist TUN6998083; beides dient zur eindeutigen Identifikation für Nachbestellungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 110404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance and a 55° rhombic geometry for consistent finishing and extended tool life; the DNMG110404 is designed for stable turning under repeatable conditions — Order the DNMG110404 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110404 GT9530 indexable turning insert — coated cermet, 55° rhombic, Tungaloy DNMG110404 GT9530 Tungaloy-Wendeplatte is an ISO‑format indexable insert for general turning tasks where surface finish and tool life are priorities Coated cermet grade GT9530 for finishing 55° rhombic insert for external and internal turning Double‑sided chipbreaker for economical use Cylindrical hole and ISO compatibility Precise finishing and extended tool life through advanced cermet grade The coated cermet composition of this indexable insert delivers a stable cutting edge and reduced flank wear when machining steel under steady conditions. The GT9530 grade is formulated for finishing to light general-purpose turning, which translates into a consistently improved surface quality and fewer in‑process interruptions. Thanks to the combination of substrate and coating, the insert offers enhanced resistance to abrasive wear and a measurable extension of tool life compared with uncoated finishing grades. Reliable geometry for versatile turning operations The 55° rhombic geometry provides a balanced approach between access and strength, suitable for both external and internal turning operations. A 0.4 mm corner radius supports fine surface generation while maintaining adequate edge robustness for stable feeds. The insert is double‑sided, allowing economical indexation, and the cylindrical mounting hole ensures secure fastening in ISO‑compatible toolholders. This geometry simplifies tool selection for shops that require predictable, repeatable results across medium‑duty applications. Compatibility and mounting considerations for production environments As an ISO‑standard insert, the DNMG110404 integrates into common external holders and boring bars provided that form, relief angle, tolerance class, attachment method, size and thickness are matched. The specified 4.76 mm plate thickness and 11 mm inscribed circle are dimensions to verify against existing toolholders to ensure correct seating and clamping. Proper matching reduces vibration and runout, which in turn supports the grade’s capacity to deliver its expected surface finish and wear behaviour. Practical benefits for machining shops and production lines Using this insert supports predictable process outcomes: fewer tool changes from the double‑sided chipbreaker, reliable finish quality from the coated cermet, and straightforward replacement due to ISO compatibility. For operations aiming to reduce downtime and improve throughput, the insert’s properties encourage longer uninterrupted cycles and more consistent part quality. When combined with the correct holder and cutting parameters, the result is a cost‑effective solution for finishing and light general turning work. Contact Metav Werkzeuge today to discuss how the DNMG110404 GT9530 Tungaloy indexable insert can be integrated into current toolsets and to request tailored cutting recommendations Technical Data Article number: 6998088 Manufacturer SKU: TUN6998088 Model series: ISO indexable turning inserts Application: Turning Material: Carbide Coating/grade: GT9530 Manufacturer: Tungaloy Facts Insert designation: DNMG110404 Inscribed circle: 11 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Geometry angle: 55° Mounting hole: cylindrical, with hole Mounting style: double‑sided chipbreaker Special features Coated cermet for finishing to light universal use ISO‑form for broad holder compatibility Double‑sided indexable design Suitable for steel under stable cutting conditions Designed for good surface finish and extended wear resistance FAQ What materials is this insert intended for? The DNMG110404 GT9530 Tungaloy insert is intended primarily for machining steel, offering wear resistance and surface quality suited to finishing and light universal turning. How does the GT9530 grade affect machining performance? GT9530 is a coated cermet grade formulated for low‑wear finishing; with the DNMG110404 it provides improved surface finish and extended tool life under stable cutting conditions. Is this insert compatible with existing ISO holders? Yes — the DNMG110404 follows ISO form dimensions; compatibility depends on matching form, relief angle, tolerance class, attachment method, size and thickness to the chosen holder. What is the advantage of the 55° rhombic shape? The 55° rhombic geometry gives a balance of access and edge strength for both external and internal turning, supporting fine finishing with the specified 0.4 mm corner radius. Can the insert be indexed to use both sides? Yes, the insert is double‑sided with a chipbreaker on both faces to allow economical indexing and extended service life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 grade and coated cermet construction to achieve longer tool life and consistent surface quality in stable turning operations; the rhombic ISO form and cylindrical hole ensure straightforward integration with ISO holders. Order the DNMG110404 GT9530 insert directly via Metav Werkzeuge or consult the Metav team for application support. DNMG110404 GT9530 Tungaloy turning insert — coated cermet, 0.4 mm nose radius A DNMG110404 GT9530 indexable turning insert designed for finishing and light universal turning on steel, offering wear-resistant performance in stable machining conditions Coated cermet grade GT9530 for long tool life 0.4 mm nose radius for fine surface finish ISO DNMG110404 rhombic insert with cylindrical hole Double-sided chipbreaker for stable cutting Extended tool life through a wear-resistant cermet grade The GT9530 composition is a coated cermet engineered for wear resistance during finishing and light universal turning on steel. In practice, the coating reduces flank wear and extends intervals between indexings, which improves overall process efficiency and reduces machine downtime. The result is a measurable increase in productive run-time under stable cutting conditions, while surface requirements are maintained without frequent tool changes. Consistent surface quality from a fine nose radius A 0.4 mm nose radius is specified to balance surface integrity and cutting forces; this radius supports a fine surface finish at appropriate feeds and helps to avoid chatter when the set-up is rigid. For finishing passes, the small radius lowers the risk of form deviation and makes it easier to achieve tight tolerances. When combined with the GT9530 coating, the geometry contributes to predictable part quality and fewer corrective operations. Fast integration with ISO holders and secure clamping The ISO DNMG110404 format is a common rhombic insert form that fits a wide range of external holders when the form, clearance angle, tolerance class, fastening, size and thickness match. The insert is rhombic with a cylindrical hole and a plate thickness of 4.76 mm, enabling stable mechanical clamping with standard shims, clamp sets and replacement screws. The double-sided design with a dedicated chipbreaker allows efficient use of both sides before replacement. Optimised for steel finishing and light universal turning Intended specifically for steel machining, this coated cermet grade performs best in finishing to light general-purpose operations where stable conditions and good surface quality are priorities. The double-sided chipbreaker supports controlled chip formation, which aids tool life and operator safety. The insert is less suited to heavy interrupted cuts or high-impact scenarios; in such cases alternative grades or geometries should be considered for process reliability. Choose the GT9530-coated DNMG110404 Tungaloy insert for reliable finishing on steel and contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6710243 SKU: 6710243-Tungaloy Manufacturer SKU: TUN6710243 Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications Nose radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 11 Clearance angle: 0° Main angle: 55° ISO code: 110404 Design and special features Coating/sort: GT9530 Cutting material type: coated cermet Shape: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Intended use: turning (external and internal) Compatibility: ISO holders, shims, clamp sets and replacement screws FAQ Is this insert suitable for finishing steel components? Yes. The DNMG110404 GT9530 insert from Tungaloy is a coated cermet grade designed for finishing and light universal turning on steel, delivering improved wear resistance and surface quality. What nose radius does the insert have? The DNMG110404 GT9530 is specified with a 0.4 mm nose radius, which supports fine surface finishes at appropriate feed rates. Which holder types are compatible with this insert? Compatibility is achieved with ISO-format holders that match the insert form, clearance angle, tolerance class, fastening, size and thickness; the DNMG110404 form and dimensions must be observed when selecting a holder. What chip control does the insert provide? The DNMG110404 GT9530 features a double-sided chipbreaker designed to support stable chip formation in finishing and light turning operations. How is the insert secured in the toolholder? The insert has a cylindrical hole and is used in a system consisting of an ISO insert seat, external holder or shank, a shim/clamp set and replacement screws for secure clamping. For which applications is the GT9530 grade optimised? The GT9530-coated cermet grade is optimised for wear-resistant finishing and light universal turning on steel in stable machining setups to achieve consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Take advantage of a DNMG110404 NS9530 indexable insert that combines a finishing-grade uncoated cermet with a sharp cutting edge and economical double-sided usage for consistent surface quality; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DNMG 110404 NS9530 — ISO indexable turning insert by Tungaloy (uncoated cermet, finishing for steel) DNMG110404 NS9530 is an ISO-standard indexable insert designed for turning applications and optimised for finishing steel with low cutting forces and high surface quality DNMG 110404 geometry, ISO-standard Uncoated cermet NS9530 for finishing Sharp cutting edge, low cutting forces Double-sided insert with cylindrical hole Achieve consistent finishing with low cutting forces The DNMG110404 NS9530 is a finishing-grade indexable insert engineered around an uncoated cermet cutting material. The composition delivers a sharp cutting edge that reduces built-up edge and keeps cutting forces low, which directly benefits process stability on continuous cuts and when machining small depths of cut. For workshops seeking reliable surface quality, the reduced forces translate into less vibration and a more predictable part finish. Straightforward compatibility and robust clamping This insert follows ISO-standard geometry, so fitment depends on holder form, relief angle and tolerance class. The rhombic insert features a cylindrical hole and is double-sided, enabling economical indexability and fast tool changes. Key dimensions such as 4.76 mm thickness and 11 size ensure clear match-up with matching external holders or boring bars; the 0° clearance and 55° main angle are optimised for finishing passes on steel, simplifying setup and reducing trial-and-error on the shop floor. Stable chip control and predictable tool life for finishing passes The NS9530 grade focuses on finishing operations in steel and offers a combination of edge sharpness and wear resistance suitable for continuous cutting. The double-sided design doubles available cutting edges per insert, while the cermet formulation helps maintain the edge geometry longer under low to moderate cutting loads. This results in steady machining performance and stable part quality over extended runs, supporting a more efficient production rhythm. Practical application advice and system overview Use this insert for external and internal turning where fine surface integrity is required. Select the appropriate chipbreaker and grade according to the workpiece material, machining stability and depth of cut. The typical system comprises the ISO indexable insert, a compatible external holder or boring bar, a subplate or clamping set, and spare fixing screws. For specific holder recommendations or cutting parameters, the technical team can advise on matching holder geometry and clamping to secure the best performance. For tailored selection advice on the Tungaloy DNMG110404 NS9530 finishing insert and compatible holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal setup for turning steel. Technical Data Article number: 6998159 SKU: 6998159-Tungaloy Manufacturer SKU: TUN6998159 Model series: ISO-Drehwendeschneidplatten ISO designation: DNMG110404 Grade: NS9530 Facts Size: 11 Thickness: 4.76 mm Corner radius: 0.4 mm Main angle: 55° Relief/clearance angle: 0° With hole: yes Special features Cutting material: uncoated cermet (NS9530) Substrate: carbide Insert shape: rhombic Chipbreaker: double-sided Hole style: cylindrical hole Typical application: turning (finishing external and internal) System components: insert, external holder/boring bar, subplate/clamping set, spare screws FAQ Which materials is this insert intended for? This insert is a finishing-grade solution for steel; the NS9530 uncoated cermet is optimised for continuity of cut and high surface quality in steel turning. Can the insert be indexed to use all cutting edges? Yes, the rhombic DNMG110404 is double-sided with a central cylindrical hole, allowing indexation of multiple edges to extend usable life. What are the key dimensions to check when selecting a holder? Confirm the 11 size, 4.76 mm thickness, 0.4 mm corner radius and the 55° main angle to ensure compatibility with the chosen holder or boring bar. Is this insert suitable for interrupted cuts? The NS9530 grade is designed primarily for finishing and continuous cutting; for heavily interrupted cuts, alternative grades or geometries should be considered. How to order replacement inserts or matching holders? Reference article number 6998159 or SKU 6998159-Tungaloy when enquiring to ensure the correct DNMG110404 NS9530 insert and to receive recommendations for compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp finishing grade and ISO compatibility for consistent surface quality and efficient indexing; the uncoated NS9530 cermet grade delivers low cutting forces and excellent finish on steel. Order directly via Metav Werkzeuge or contact the consultants for application advice and holder compatibility. DNMG 110404 NS9530 — Tungaloy indexable insert for Turning, rhombic, 0.4 mm radius The DNMG110404 NS9530 is an ISO-standard rhombic indexable insert designed for external and internal turning applications, optimised as a finishing grade for steel with a sharp cutting edge and low cutting forces NS9530 cermet for high surface finish Sharp edge for low cutting forces Double-sided chipbreaker design ISO DNMG 110404, rhombic, 0.4 mm radius Consistent finishing performance for steel components The uncoated NS9530 cermet grade is engineered for finishing operations where high surface finish and dimensional accuracy are priorities. Its sharp cutting edge reduces ploughing and produces lower cutting forces, which is particularly beneficial for continuous cuts and small depths of cut. For turning operations this means improved surface integrity and fewer rework steps, helping to shorten cycle times while maintaining consistent part quality. Geometry and ISO compatibility for secure toolholding The rhombic DNMG110404 geometry with a 0.4 mm corner radius and a 55° wedge angle provides predictable chip formation and stable cutting when paired with the correct holder. Compatibility to the toolholder is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness; ensuring the insert seats correctly prevents chatter and enhances repeatability. The ISO standardisation allows straightforward replacement within established turning tool systems. Chip control and economical indexing A double-sided chipbreaker layout enables indexing to a fresh cutting edge, extending the effective life per insert and reducing tooling costs per component. The chipbreaker design supports controlled chip flow and heat dissipation during finishing cuts, lowering thermal load on the edge and sustaining the fine cutting geometry. These attributes contribute to stable process windows and fewer interruptions for tool changes in production environments. Selection advice and application notes for process reliability Select the NS9530 finishing grade when machining steels where low cutting forces and surface quality are required; pair the insert with a holder suited to rhombic DNMG geometry and ensure clamping and tolerance class match. For mixed or less rigid setups, consider a more robust grade or adjusted cutting data. If uncertainty remains about the ideal chipbreaker or parameter set for a specific alloy and machine condition, Metav Werkzeuge provides application support and can advise on optimal combinations to achieve repeatable, economical machining. For precise finishing of steel components, request the Tungaloy DNMG110404 NS9530 inserts from Metav Werkzeuge or contact Metav Werkzeuge for tailored application support via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6998170 Manufacturer SKU: TUN6998170 Label: DNMG110404 NS9530 Tungaloy-indexable insert Series: ISO turning indexable inserts Facts Radius: 0.4 mm Size: 11 mm Thickness: 4.76 mm Wedge angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Rhombic plate form ISO DNMG 110404 designation Application: turning (external and internal) FAQ What steels is this insert best suited for? The NS9530 uncoated cermet grade is optimised for finishing steels; the DNMG110404 insert delivers low cutting forces and a fine surface finish in continuous turning operations. Can the insert be used on internal turning as well as external turning? Yes, the ISO rhombic geometry and DNMG110404 designation make the insert suitable for both external and internal turning when used with a compatible holder. How does the double-sided chipbreaker affect tool life? A double-sided chipbreaker allows indexing to a fresh edge, effectively doubling the available cutting edges per insert and improving cost efficiency for finishing cycles. What should be checked for holder compatibility? Ensure the holder matches the insert form, clearance angle (0°), tolerance class, fastening method, size and thickness to guarantee proper seating and repeatable performance. Is the insert coated? This insert is an uncoated cermet grade (NS9530), specifically intended for finishing applications where a sharp edge and low cutting forces are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade cermet and ISO compatibility for reliably high surface quality; order the insert directly via Metav Werkzeuge or consult our technical team for process optimisation. DNMG110404 NS9530 Tungaloy — ISO turning insert, uncoated cermet, 0.4 mm corner radius A DNMG110404 NS9530 turning insert engineered for finishing operations on steel, offering a sharp cutting edge and low cutting forces for consistent surface finish. ISO‑compatible rhombic insert DNMG format Uncoated cermet NS9530 for high surface finish 0.4 mm corner radius for precise profiling Cylindrical hole with double-sided chipbreaker Superior finish with the NS9530 finishing grade The uncoated cermet grade NS9530 is formulated for low cutting forces and a sharp cutting edge, delivering excellent surface quality in continuous finishing passes. As a finishing insert, it reduces the need for subsequent dressing and supports stable machining when small depths of cut are used. The combination of cermet characteristics and precise geometry leads to consistent part appearance and dimensional control on steel, making this indexable insert a rational choice where surface integrity and repeatability are priorities. ISO compatibility and secure clamping for stable turning The rhombic DNMG format is an ISO‑standard geometry; compatibility with the holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole and a double-sided chipbreaker, enabling simple indexing and secure clamping in suitable external holders or boring bars with the correct shim and clamp set. Dimensional values such as 11 mm size, 4.76 mm thickness and a 55° included angle ensure predictable fitting behaviour in standard systems, which helps to minimise set-up time and improve process reliability. Practical application guidance for turning steel Designed primarily for turning and especially for finishing steel, this insert performs best in continuous cuts with small feedrates and depths of cut; the 0.4 mm corner radius supports accurate profile reproduction and good edge strength. Select the matching chipbreaker and grade according to the workpiece material and the required stability of the machining process. For operations deviating from continuous finishing—such as heavy interrupted cuts or roughing—consider alternative grades or geometries better suited to high material removal. For any uncertainties regarding holder compatibility or process parameters, technical support is available to advise on optimal setups. Contact Metav Werkzeuge for application advice and to purchase the DNMG110404 NS9530; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6797239 Manufacturer SKU: TUN6797239 SKU: 6797239-Tungaloy Series: ISO turning inserts Designation: DNMG110404 NS9530 Dimensions & Angles Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Hole: cylindrical Materials & Features Uncoated cermet grade NS9530 Hardmetal substrate Double-sided chipbreaker Rhombic insert shape ISO‑compatible DNMG format Application: turning (external and internal) FAQ Is this insert suitable for finishing steel? Yes. The DNMG110404 NS9530 insert uses the uncoated cermet NS9530, a finishing grade developed for low cutting forces and high surface quality when turning steel. Which holders are compatible with this DNMG insert? Compatibility depends on the holder geometry and clamping system; the DNMG format fits ISO‑type external holders or boring bars when form, relief angle, tolerance class, fastening, size and thickness match the insert. Can the insert be indexed and reused on both sides? Yes. The insert is double‑sided with a cylindrical hole, enabling indexing to a fresh cutting edge and secure clamping in the correct holder assembly. Is this insert recommended for interrupted cuts or roughing? The NS9530 grade is optimised for continuous finishing cuts with small depths of cut; for heavy interrupted cuts or roughing, a more robust grade or different geometry is recommended. What additional components are required for a complete system setup? A matching external holder or boring bar, a suitable shim/underlay, clamping set and replacement screws are typically required to assemble the complete cutting system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
The product data contains a material inconsistency: the cutting grade is specified as "uncoated cermet (NS9530)" while the material field is given as "Hartmetall" (cemented carbide). These indicate different substrate types and cannot both be correct. Because of this contradiction, a reliable, standards-compliant product description cannot be generated. Please confirm whether the insert is a cermet grade NS9530 or a cemented carbide item, and provide the correct substrate and coating details. Additionally, it is essential to clarify any other relevant specifications, such as hardness, toughness, and intended application, to ensure the product description meets all necessary requirements. Once the material discrepancy is resolved, a full product text can be produced.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of uncoated cermet grade NS9530, a precise 0.4 mm corner radius and ISO compatibility for consistent finishing in turning operations; order the DNMG110404 NS9530 directly via Metav Werkzeuge or consult the team for application advice. DNMG110404 NS9530 Tungaloy indexable insert — rhombic, 0.4 mm radius for turning DNMG110404 NS9530 Tungaloy is an ISO‑format indexable insert designed for fine turning and finishing of steel components, offering a sharp cutting edge and low cutting forces. Precision rhombic insert, 0.4 mm corner radius Uncoated cermet grade NS9530 for fine finishing Suited to continuous cuts and small depths Precision finishing for superior surface quality The DNMG110404 NS9530 Tungaloy indexable insert is engineered as a finishing grade for steel turning, delivering a consistently sharp cutting edge and reduced cutting forces. The use of an uncoated cermet substrate provides excellent edge stability and improved wear behaviour during continuous cuts, which directly translates into a finer surface finish and reduced rework. By opting for a cutting geometry with a 0.4 mm corner radius and a rhombic plate form, the insert supports delicate material removal and tight tolerance maintenance, making it well suited for components requiring high dimensional accuracy. Compatibility and mounting for reliable process integration ISO standardisation ensures straightforward integration into existing toolholders: form, clearance, tolerance class, fixing method, size and thickness determine compatibility. The DNMG shape with a cylindrical hole is compatible with many ISO turning holders and top clamps, simplifying tool change and inventory management. The 0° clearance angle and a plate thickness of 4.76 mm provide stiffness for small depth-of-cut finishing tasks while keeping vibration and chatter to a minimum. Clear identification of grade NS9530 and the double-sided chipbreaker helps match insert selection to workpiece material and machining stability for predictable results. Operational benefits and material suitability Designed primarily for turning steel, this finishing insert supports stable chip formation and gentle cutting action, which reduces burr formation and minimises secondary operations. The uncoated cermet composition offers thermal stability and a finely honed cutting edge that favours continuous feeds and light depths of cut. For production environments where surface integrity and repeatability matter, the combination of ISO compatibility, precise geometry and the NS9530 grade yields improved process efficiency and consistent part quality. Where higher productivity or heavier interruptions are expected, consider pairing the insert with an appropriate holder and cutting parameters matched to the workpiece and machine rigidity. For specialised finishing tasks with Tungaloy cermet inserts, contact Metav Werkzeuge for tailored recommendations or to order the DNMG110404 NS9530 directly through Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966138 Manufacturer SKU: TUN6966138 Label: DNMG110404 NS9530 Tungaloy-Wendeplatte Facts Angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Size: 11 mm Special features Rhombic plate form Cylindrical hole (with hole) Uncoated cermet grade NS9530 Double-sided chipbreaker ISO‑compliant turning insert FAQ What material applications is this insert best suited for? The DNMG110404 NS9530 insert is optimised for steel turning, offering a finishing grade that favours low cutting forces and high surface quality. Is the insert compatible with standard ISO holders? Yes. The ISO format and cylindrical hole make the DNMG110404 NS9530 compatible with many ISO turning holders and mounting systems when form, size and thickness match. Can the NS9530 grade be used for interrupted cuts? The NS9530 cermet is primarily a finishing grade for continuous cuts and small depths of cut; interrupted or heavy cuts may require a different grade or insert geometry. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius reduces the risk of edge chipping in finishing operations and helps achieve finer surface finishes while maintaining dimensional control. Is the insert reversible or indexable? The DNMG110404 is double-sided, providing two effective cutting edges per indexing position and supporting economical use of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Take advantage of the DNMG110404 NS9530 finishing grade and the stability of an ISO‑standard insert to improve surface quality and reduce cutting forces; order through Metav Werkzeuge or consult the team for holder compatibility and process setup. DNMG 110404 NS9530 Tungaloy indexable insert — finishing for turning The DNMG110404 NS9530 Tungaloy indexable insert is an ISO‑standard rhombic turning insert designed for finishing steel with a sharp cutting edge and low cutting forces. Finishing grade NS9530 for superior surface finish Uncoated cermet for sharp cutting edge Rhombic DNMG form with 0.4 mm corner radius Cylindrical hole, compatible with ISO holders High‑quality finishing for steel components The NS9530 uncoated cermet grade is optimised for finishing operations on steel, delivering a sharp cutting edge that reduces rubbing and produces a consistently fine surface. Its material properties support continuous cutting and small depths of cut, which helps to lower cutting forces and minimise heat generation. For manufacturers seeking predictable part quality, this grade gives a clear advantage in achieving tight surface‑finish specifications without complex rework. Safe integration with ISO holders and predictable clamping Compatibility with the clamping system is determined by form, clearance angle, tolerance class, fastening type, plate size and thickness. The rhombic DNMG geometry with a 55° approach angle and a 0.4 mm corner radius ensures stable seating in standard ISO holders and provides repeatable positioning. Choosing the correct holder and torque setting reduces vibration and tool deflection, which translates directly into fewer rejects and steadier cycle times. Efficient production through stable cutting behaviour This finishing insert is double‑sided with a cylindrical hole, allowing two usable edges and straightforward indexation. The uncoated cermet chemistry focuses on delivering a clean shear and low built‑up edge tendency in steady cutting conditions. The result is consistent surface quality and predictable tool life in batch production. Process stability combined with an ISO‑compliant plate reduces setup variability and supports higher first‑pass yields. Practical selection and application guidance Select the matching chipbreaker and grade according to workpiece stability and the intended turning strategy; double‑sided chip control is particularly effective in continuous cuts. When replacing a tool, verify holder compatibility by checking the insert form, thickness (4.76 mm), hole style and tolerance class to avoid misfits. For short‑run finishing or high‑mix production, the insert’s geometry and material help to balance edge sharpness with robustness, reducing the need for frequent tool interventions. Contact Metav Werkzeuge for specific advice on holder compatibility and process parameters for Tungaloy NS9530 finishing inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6797217 Manufacturer SKU: TUN6797217 SKU: 6797217-Tungaloy Model series: ISO‑turning indexable inserts Facts Shape: rhombic DNMG110404 Corner radius: 0.4 mm Thickness: 4.76 mm Size: 11 mm Clearance angle: 0° Approach angle: 55° Hole: with cylindrical hole Special features Grade: NS9530 (uncoated cermet) Application: finishing turning of steel Chipbreaker: double‑sided Two cutting edges per side (double‑sided) ISO‑standard insert for compatible holders FAQ What materials is the insert suitable for? The DNMG110404 NS9530 Tungaloy insert is specified as a finishing grade for steel; the uncoated cermet composition is tuned for low cutting forces and high surface quality in continuous cutting. How does the DNMG geometry affect performance? The rhombic DNMG form with a 55° approach angle and a 0.4 mm corner radius provides stable seating in ISO holders and a favourable cutting direction for finishing, helping to reduce vibration and improve repeatability with the Tungaloy insert (SKU 6797217-Tungaloy). Is the insert indexable and how many edges are usable? Yes — the insert is double‑sided with a cylindrical hole for secure clamping; each side offers usable edges, enabling efficient indexation during production. When should the NS9530 grade be chosen over other grades? Choose NS9530 when priority is a sharp cutting edge, low cutting forces and excellent surface finish on steel, particularly for continuous finishing cuts and small depths of cut. What must be checked for holder compatibility? Verify insert form, thickness (4.76 mm), hole style (cylindrical) and tolerance class to ensure proper seating and secure clamping in ISO‑standard holders before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet grade, a sharp cutting edge and ISO-compatible geometry to achieve consistent finishing results in turning; order directly via Metav Werkzeuge or consult our technical team for application support. DNMG 110404 NS9530 Tungaloy — DNMG110404 turning insert for finishing steel DNMG110404 NS9530 Tungaloy is an ISO-standard indexable insert tailored for finish turning of steel, offering a sharp cutting edge and a double-sided chipbreaker for continuous cutting applications. DNMG110404 format for ISO-turning systems Uncoated cermet NS9530 for finishing steel Double-sided chipbreaker for continuous cuts 0.4 mm corner radius, sharp cutting edge Achieve superior surface quality with a finishing-grade cermet The NS9530 grade is an uncoated cermet developed for finish turning of steel, delivering low cutting forces and a consistently fine surface finish. Cermet combines ceramic and metallic properties, so it keeps a sharp cutting edge longer under continuous cutting conditions; this reduces the tendency for built-up edge and helps to maintain dimensional accuracy. For customers aiming for smooth part surfaces and predictable process behaviour, the finishing orientation of this grade means fewer downstream operations and a more stable machining cycle. ISO compatibility and geometry that simplify process planning Built to ISO geometry, the rhombic design with a 55° approach angle and 0° clearance provides a familiar reference for holder selection and programme setup. Compatibility with a chosen holder depends on insert form, clearance angle, tolerance class, fixing method, size and thickness; this ISO conformity simplifies cross-referencing with existing toolholders and reduces setup times. The standardised format also supports reproducible results across machines, enabling easier process qualification and repeatable component quality in production runs. Controlled chips and steady cutting for continuous operations The double-sided chipbreaker manages chip formation during low-depth finishing cuts, improving evacuation and reducing the risk of surface marks. Combined with the cermet’s low cutting resistance, the insert promotes steady-state cutting in continuous-feed applications, which means less vibration, improved surface integrity and more reliable cycle times. Explaining the chipbreaker: it shapes and breaks the chip as it forms, thereby avoiding long, entangling chips and facilitating automated or high-volume production. Practical specifications that aid selection and installation Key physical details support correct selection: the insert features a 0.4 mm corner radius, a plate thickness of 4.76 mm and a cylindrical hole for secure clamping. The carbide substrate provides structural strength while the uncoated surface of this finishing grade focuses on edge sharpness rather than extreme wear resistance, making it ideal for light, high-quality finishing passes. The system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement clamping screws — select the chipbreaker and grade that match the workpiece material and the rigidity of the setup. For high-quality finish turning with Tungaloy NS9530, contact Metav Werkzeuge for tailored advice and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998165 SKU: 6998165-Tungaloy Manufacturer SKU: TUN6998165 Designation: DNMG110404 Material: carbide Grade: NS9530 Key dimensions Corner radius: 0.4 mm Insert size: 11 mm Thickness: 4.76 mm Approach angle: 55° Clearance angle: 0° Special features Uncoated cermet grade NS9530 Double-sided chipbreaker Rhombic shape (DNMG) Cylindrical hole for clamping ISO-standard indexable insert for turning Intended use: finishing steel System requires matching holder, shim/clamp set and screws FAQ Which materials is this insert suitable for? The DNMG110404 NS9530 Tungaloy insert is intended primarily for finishing of steel; the NS9530 uncoated cermet is optimised for low cutting forces and superior surface finish on steel workpieces. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius provides a balance between edge strength and surface quality; with the DNMG110404 NS9530 this radius helps to maintain a sharp profile for fine finishing passes while still offering sufficient robustness against minor deflections. Can the insert be used on both sides? Yes, the insert is double-sided and includes a double-sided chipbreaker, allowing the insert to be indexed and reused on the second cutting edge to extend usable life. What holder characteristics must be matched to this insert? Compatibility requires matching the insert form, clearance angle (0°), tolerance class, fixing method, size and thickness; choose a holder or boring bar specified for DNMG geometry to ensure correct clamping and cutting attitude. How does the chipbreaker support continuous cuts? The double-sided chipbreaker actively shapes and breaks chips during the cut, reducing long, continuous swarf and enabling stable chip evacuation, which is particularly beneficial for continuous-feed finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product data lists the material as carbide while the cutting material is specified as uncoated cermet. Please verify and correct the source data before a full product description can be produced, as accurate and consistent information is essential for ensuring the reliability of the product details provided to customers, preventing potential confusion or errors in the manufacturing or purchasing process, and maintaining the overall integrity of the product database, which is critical for both internal operations and external communications with stakeholders who rely on precise specifications to make informed decisions.
DNMG 110404 T5105 Wendeplatten - Tungaloy
High-speed cast-iron turning is supported by the combination of a CVD-coated carbide grade and a stable DNMG geometry, delivering consistent chip control and extended tool life; the double-sided design reduces index time and tooling costs. Order the DNMG110404 T5105 directly via Metav Werkzeuge or consult our advisors for compatibility and selection support. DNMG 110404 T5105 — ISO turning indexable insert by Tungaloy for turning The DNMG110404 T5105 is an ISO rhombic indexable insert designed for high-speed turning of cast iron, featuring a CVD-coated carbide grade for wear resistance and a geometry optimised for stable cutting conditions. CVD-coated carbide grade T5105 Rhombic DNMG geometry, 55° wedge angle Double-sided chipbreaker for stable chips 0° clearance angle for precise profiling Reliable high-speed performance with CVD-coated carbide The CVD-coated carbide composition of the grade T5105 provides enhanced wear resistance under elevated cutting speeds, making it particularly suited to high-speed turning of cast iron. The chemical vapour deposited coating reduces flank and crater wear, which supports longer cutting intervals and predictable tool-life cycles. For production pallets and series work where reproducible results matter, this specification helps maintain consistent dimensional accuracy and surface finish while lowering per-part tooling expenditure. Geometry and fit that improve process stability The rhombic DNMG form with a 55° wedge, 0° clearance angle and corner radius 0.4 mm gives a balanced combination of edge strength and accessibility for external and internal turning operations. The insert’s double-sided chipbreaker design allows economical indexing, while the cylindrical hole and standard ISO dimensions ensure secure clamping in compatible holders. These geometric features reduce vibration and support stable chip evacuation, which in turn benefits surface quality and repeatability on medium- to heavy-duty lathes. System compatibility and practical selection guidance This ISO-format insert functions as part of a system comprising a matching external holder or boring bar, a locating shim and appropriate clamping hardware. When integrating the insert, select the holder that matches the DNMG form, thickness (4.76 mm) and tolerance class to ensure correct seating and repeatable tool offsets. The grade is optimised for cast iron in stable setups; for differing workpiece materials or intermittent cuts, choose a chipbreaker and grade aligned with those conditions to preserve edge life and process reliability. Using the correct combination minimises downtime and supports a predictable production flow. For secure high-speed cast-iron turning with Tungaloy’s T5105 grade, contact Metav Werkzeuge for availability and tailored technical advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6852956 Manufacturer SKU: TUN6852956 Our SKU: 6852956-Tungaloy Model series: ISO turning indexable inserts Product name: DNMG110404 T5105 Tungaloy indexable insert Facts Corner radius: 0.4 mm Inscribed circle / size: 11 mm Plate thickness: 4.76 mm Clearance angle: 0° Wedge angle: 55° Special features Material: CVD-coated carbide Grade: T5105 Double-sided chipbreaker Cylindrical hole for secure clamping Rhombic plate form (DNMG) Application: turning; optimised for cast iron ISO compatibility: DNMG110404 format FAQ What materials is this insert suitable for? The Tungaloy DNMG110404 T5105 insert is optimised for machining cast iron at high cutting speeds; alternative grades are recommended for steels or non-ferrous alloys. Which holders are compatible with this DNMG insert? Compatibility depends on ISO DNMG geometry, plate thickness (4.76 mm), form and clamping style; the insert fits standard DNMG external holders and boring bars when the holder matches the ISO dimensions. What are the key dimensions to check before ordering? Key dimensions include the inscribed circle 11 mm, plate thickness 4.76 mm, corner radius 0.4 mm and the 55° wedge angle, which determine fit and cutting access for the intended operation. Can the insert be indexed to extend usage? Yes, the double-sided chipbreaker and rhombic design permit indexing to present fresh cutting edges, improving economy and reducing tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a proven CVD-coated T5115 grade and a compact rhombic geometry to achieve reliable machining of cast-iron workpieces with stable chip formation and long tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DNMG 110404 T5115 — Indexable turning insert, 55° approach angle, Tungaloy DNMG110404 T5115 is a rhombic ISO indexable turning insert designed for turning applications in cast iron, offering a balanced mix of wear resistance and cutting-edge stability ISO‑standard rhombic insert CVD‑coated cemented carbide grade T5115 55° approach angle for versatile turning Double-sided chipbreaker for extended life High‑performance grade for cast‑iron turning that reduces downtime The T5115 grade is a CVD‑coated cemented carbide developed as a universal solution for machining cast iron. The CVD coating provides enhanced surface hardness and wear resistance, which translates into longer tool life and fewer indexings compared with uncoated grades. For production environments where consistent component quality and predictable tool consumption matter, this insert helps maintain cycle times by delivering stable cutting conditions and repeatable edge performance. Geometry and chip control designed for productive machining With a rhombic plate form and a 55° approach angle, the insert offers an effective compromise between cutting-edge strength and access to profiles. The double‑sided chipbreaker allows two usable cutting edges per face, improving economics and ensuring controlled chip formation during external and internal turning. A 0.4 mm corner radius supports smoother finishes on interrupted cuts while preserving edge stability on heavier cuts, making it suitable for typical roughing and finishing passes in cast‑iron components. System compatibility and installation guidance for smooth set‑up Compatibility with toolholders depends on form, relief angle, tolerance class, fastening and the insert’s size and thickness. The DNMG format is widely supported by external holders and boring bars; a typical system comprises the ISO insert, a matched external holder or boring bar, an underlay/clamp set and replacement screws. The insert’s cylindrical hole ensures positive location and simple clamping in standard DNMG seats, streamlining changeovers and minimising setup errors on the shop floor. Practical benefits and process reliability in daily production Choosing a CVD‑coated grade such as T5115 emphasises process reliability: the coating and substrate combination promotes stable wear progression and optimised chip control, which reduces rework and improves surface integrity of cast‑iron parts. The compact plate dimensions and 4.76 mm plate thickness contribute to rigidity in the clamped system, while the standardised ISO geometry supports easy stock management and quick replacement, helping to keep machines running and production schedules on track. Contact Metav Werkzeuge for availability, application advice and recommendations on holders for Tungaloy T5115 inserts Technical data Article number: 6852957 Manufacturer SKU: TUN6852957 SKU: 6852957-Tungaloy Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Core dimensions and measurable data Size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Relief/free clearance angle: 0° Hole: with cylindrical hole Designs and special features Shape: rhombic Grade/coating: T5115, CVD‑coated cemented carbide Chipbreaker: double‑sided Intended use: Drehen (turning) System components: insert, suitable external holder or boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert optimised for? The Tungaloy DNMG110404 T5115 insert is optimised for machining cast iron, offering a balanced combination of wear resistance and cutting edge stability suitable for common grey and nodular cast‑iron alloys. Can this insert be used in standard DNMG holders? Yes, the insert follows ISO geometry for DNMG formats; compatibility is determined by form, relief angle, tolerance and clamping method, so pairing with a matching DNMG external holder or boring bar is recommended. What advantage does the CVD coating provide? The CVD coating on the T5115 grade increases surface hardness and wear resistance, which helps to extend tool life and maintain consistent cutting performance on abrasive cast‑iron materials. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm radius offers a compromise between surface finish and edge robustness: it smooths the cutting action for improved surface quality while retaining enough edge strength for light to medium roughing passes. Is the insert reversible and how many cutting edges are available? The rhombic DNMG insert is double‑sided with a double‑sided chipbreaker, providing multiple indexable edges per plate to improve economy and reduce tool change frequency. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110404 T5125 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD‑coated carbide and a double‑sided chipbreaker for stable chip control and reliable performance in interrupted turning; compatibility with ISO holders ensures straightforward integration into existing setups. Order directly via Metav Werkzeuge or consult our specialists for application support. DNMG110404 T5125 indexable turning insert — CVD‑coated carbide, double‑sided chipbreaker (Tungaloy) The DNMG110404 T5125 is an ISO‑standard indexable insert for turning, designed for external and internal applications and optimised for cast iron under interrupted cuts. CVD-coated carbide grade T5125 Double-sided chipbreaker ISO rhombic 55° form, 11 mm inscribed circle Consistent performance where interruptions occur The CVD‑coated carbide grade provides a balance between toughness and wear resistance, making this indexable insert especially suitable for interrupted cutting and less stable machining conditions. The applied coating improves edge life by resisting abrasive wear, while the substrate composition maintains a robust cutting edge during impacts. For operations that alternate between full engagement and chip‑breaking events, this combination reduces downtime and contributes to a steadier production flow, translating into measurable efficiency gains. Clear guidance for holder compatibility and safe clamping Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic 55° geometry and 11 mm inscribed circle mean the insert fits standard ISO clamping systems when matched by these parameters. Selecting a holder with the correct seating and screw‑clamp arrangement prevents micro‑movement and preserves the intended cutting geometry; this helps maintain dimensional accuracy and surface finish during extended runs. Where uncertainty exists, check the holder’s specification against the insert’s form and thickness to ensure reliable engagement. Practical benefits for machining cast materials With a double‑sided chipbreaker, the insert alternates useable cutting edges, offering cost efficiency per indexable edge. The geometry and chip control are tuned for cast iron and similar materials, helping to produce consistent chips and minimise the risk of built‑up edge. For operations requiring predictable tool life and repeatable results, this insert supports higher process stability and contributes to improved overall productivity. The modest cutting edge radius also assists in producing acceptable surface finishes without excessive cutting forces. How the grade and design support process reliability The combination of a tougher carbide substrate and a CVD coating improves resistance to chipping during interrupted cuts and delivers stable performance in varying conditions. As a result, tool change intervals become more predictable and machine utilisation improves. These technical choices are aimed at operators and production engineers seeking dependable inserts that integrate into standard ISO systems while offering enhanced robustness where interruptions or less rigid setups are common. Contact Metav Werkzeuge for tailored application advice and fast supply of Tungaloy DNMG110404 inserts — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6852958 SKU: 6852958-Tungaloy Manufacturer SKU: TUN6852958 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG110404 T5125 Tungaloy insert Core specifications Cutting edge radius: 0.4 mm Inscribed circle / size: 11 mm Thickness: 4.76 mm Clearance (relief) angle: 0° Lead / form angle: 55° Special features CVD-coated carbide grade T5125 Double-sided chipbreaker Rhombic plate geometry Cylindrical hole (with hole) ISO-standard indexable insert Intended application: Turning; recommended for cast iron and interrupted cuts FAQ What materials is this insert suited for? The DNMG110404 T5125 insert is recommended for cast iron and materials with similar machining characteristics, where interrupted cutting or less stable conditions are expected. How does the CVD coating affect tool life? The CVD‑coated carbide grade T5125 improves resistance to abrasive wear, which extends usable edge life under typical turning loads and contributes to more predictable tool changes. Is the insert compatible with common ISO holders? Yes. Compatibility depends on matching the insert’s form, clearance angle, tolerance class, clamping method, size and thickness to the holder; the DNMG geometry fits standard ISO rhombic 55° holders when these parameters align. Can both sides of the insert be used? The insert features a double‑sided chipbreaker, allowing alternation of cutting edges to increase cost efficiency per indexable edge. What advantage does the 0° clearance angle provide? A 0° clearance (relief) angle maintains strong support behind the cutting edge, which helps absorb impacts during interrupted cuts and supports edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 T6215 Tungaloy Wendeplatten - Tungaloy
Take advantage of the combination of robust wear resistance, precise ISO compatibility and economical indexable design to maintain a reliable turning process. Order genuine Tungaloy inserts through Metav Werkzeuge or consult our technical team for holder matching and machining recommendations. DNMG110404 T6215 DNMG ISO turning insert by Tungaloy — for turning DNMG110404 T6215 is an ISO‑conforming indexable turning insert designed for stable to lightly interrupted machining of stainless steels, offering CVD coating and a rhombic 55° geometry CVD-coated carbide grade T6215 Rhombic 55° insert geometry Double-sided chipbreaker For turning stainless steel under stable cuts Reliable wear resistance for consistent production The CVD-coated carbide composition and the T6215 grade provide high wear resistance, which stabilises tool life during longer production runs. This indexable insert is engineered for turning operations where consistent edge retention reduces interruption to machining cycles. The durable coating delays flank wear and maintains cutting-edge geometry, resulting in fewer insert changes and improved overall process economy. Geometry that improves stability and surface quality The rhombic 55° geometry combined with a 0° relief and a 0.4 mm nose radius delivers a dependable compromise between strength and accessibility in external and internal turning. The shape promotes stable contact with the workpiece, helping to control cutting forces and improve surface finish. Choosing the appropriate double-sided chipbreaker for the workpiece and cutting conditions enhances chip control and reduces the risk of built-up edge on stainless materials. Compatibility and simple system integration The insert follows ISO specification standards, so compatibility with holders is determined by insert form, relief angle, tolerance class, fixing method, size and thickness. The plate is 11 mm across, with a 4.76 mm thickness and a cylindrical hole, which supports secure clamping on standard external holders or boring bars. The standardized form simplifies inventory management and allows quick replacement with minimal setup effort. Practical benefits for workshop efficiency A double-sided, indexable design increases the usable cutting edges per insert, lowering per‑cut cost and inventory turnover compared with single‑edge solutions. In practice, this means fewer insert changes, reduced downtime and clearer cost-of-ownership calculations for medium‑to‑high volume turning of stainless steels. The combination of material, coating and geometry supports predictable performance under stable to lightly interrupted conditions. Contact Metav Werkzeuge for assistance matching holders, spare screws and shims, or to order original Tungaloy inserts and receive machining recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6944615 Manufacturer SKU: TUN6944615 Seller SKU: 6944615-Tungaloy Manufacturer: Tungaloy Numbers / Core technical data ISO designation: 110404 Size: 11 mm Thickness: 4.76 mm Nose radius: 0.4 mm Approach angle: 55° Relief angle: 0° Special features CVD-coated carbide grade T6215 Rhombic plate shape Double-sided chipbreaker Cylindrical hole for secure clamping Designed for turning of stainless steels ISO indexable insert series FAQ What applications suit this insert best? This DNMG110404 T6215 indexable insert is intended primarily for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. Which holders are compatible with the insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; use a holder designed for DNMG‑style, ISO‑conforming inserts and verify the clamping method with the DNMG110404 specifications. How does the T6215 grade benefit machining? The T6215 CVD‑coated carbide offers enhanced wear resistance and stable edge life, which helps maintain consistent machining performance and reduces the frequency of insert changes. Is special coolant or cutting data required? Standard turning practice for stainless steels should be followed; cutting data will depend on machine rigidity and workpiece stability—consult Metav Werkzeuge for tailored parameters for the DNMG110404 T6215 insert. Are spare parts or accessories supplied with the insert? The insert is supplied as an indexable plate; matching shims, clamping sets and screws are part of the overall holder system and should be ordered according to the chosen holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T6215 and the 55° rhombic geometry for consistently productive turning of stainless steels; compatible with ISO holders when form, clearance angle, tolerance class, fastening, size and thickness match. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG 110404 T6215 DNMG110404 Tungaloy indexable turning insert — CVD-coated carbide for stainless steel turning, 55° geometry The DNMG110404 T6215 is an ISO-standard indexable turning insert engineered for general external and internal turning of stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide for long tool life 55° rhombic geometry for versatile turning 0.4 mm nose radius for precise contours Consistent wear resistance for stainless steel machining The CVD-bonded carbide specification T6215 provides enhanced wear resistance when machining stainless steel, reducing flank and crater wear under steady cutting regimes. The CVD coating forms a hard, thermally stable layer that slows abrasive damage and helps maintain a sharp cutting edge for longer intervals, enabling predictable tool life and fewer interruptions for insert changes. This performance translates to improved process stability and repeatable part quality in serial turning operations. Geometry and edge form that support precision and surface finish The rhombic 55° geometry combined with a 0.4 mm nose radius offers a balance between strength and finishing capability. The acute lead angle supports reduced cutting forces in many turning setups, while the nose radius helps achieve consistent surface texture on turned components. Where contour accuracy and surface integrity matter, the insert’s geometry minimises chatter risk and aids in producing components within tight tolerances without sacrificing productivity. Engineering compatibility and practical mounting guidance Compatibility with a given holder depends on the insert’s form, clearance angle (0°), tolerance class, fastening method, size and thickness. The insert is double-sided with a cylindrical hole, permitting indexed reuse and straightforward clamping. The ISO designation facilitates selection of matching external holders or boring bars; confirmation of holder fit is recommended by checking seat form, screw type and clamp arrangement to ensure secure and repeatable positioning during turning cycles. Operational benefits and process efficiency Using an insert from the ISO series enhances tool management through standardised geometries and predictable regrind or replacement intervals. The DNMG110404 design with double-sided chipbreaker capability supports chip control across a range of cutting conditions, helping to maintain tool life and reduce secondary handling. For operations seeking a reliable balance of performance and economy, this insert supports continuous production with fewer unscheduled stops and consistent part quality. For reliable stainless steel turning with the Tungaloy T6215 grade, contact Metav Werkzeuge for ordering or detailed application recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944581 Manufacturer SKU: TUN6944581 SKU: 6944581-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: DNMG110404 Grade: T6215 Corner radius: 0.4 mm Insert size: 11 mm Plate thickness: 4.76 mm Geometry angle: 55° Clearance angle: 0° Special features CVD-coated carbide Rhombic insert shape Double-sided chipbreaker With cylindrical hole for clamping ISO-standard turning indexable insert Intended application: Turning (external and internal) FAQ What materials is this insert best suited for? The DNMG110404 T6215 insert is formulated for machining stainless steel under stable to slightly interrupted cutting conditions, leveraging the CVD-coated carbide to resist wear. How does the 55° rhombic geometry affect cutting performance? The 55° geometry reduces cutting forces and increases versatility for external and internal turning; with the 0.4 mm nose radius it helps achieve consistent surface finish and dimensional control. Can the insert be indexed and reused? Yes, the insert is double-sided and features a cylindrical hole for secure clamping, allowing indexing to the unused side to extend tool life. Which holders are compatible with this ISO insert? Compatibility depends on holder seat form, tolerance class, fastening type, size and thickness; the insert follows ISO conventions, so matching ISO holders or boring bars should be used and checked for proper fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110404 T6215 Wendeplatten - Tungaloy
High wear resistance from the T6215 grade plus a CVD-coated carbide surface deliver longer tool life and consistent finishes; the DNMG110404’s 55° rhombic geometry and 0.4 mm corner radius support reliable chip control in turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. DNMG 110404 T6215 – Turning insert (ISO DNMG110404) by Tungaloy A DNMG 110404 T6215 turning insert engineered for external and internal turning of stainless steels under stable to mildly interrupted cutting conditions ISO DNMG 110404 rhombic 55° geometry CVD-coated carbide grade T6215 for stainless steels Double-sided chipbreaker for versatile turning Cylindrical-hole design for secure clamping Consistent performance and extended tool life The insert combines a CVD-coated surface with a wear-resistant carbide substrate in the T6215 grade to provide enhanced resistance to abrasion and built-up edge when machining stainless steels. The coating reduces flank wear and improves thermal stability, which in turn maintains dimensional accuracy over longer tool life. For production environments this yields fewer tool changes and improved process reliability, while the 0.4 mm corner radius supports stable engagement at moderate depths of cut. The result is predictable surface quality and a reduction in unplanned downtime. Design and clamping for process stability Built to ISO dimensions as a DNMG110404, the rhombic 55° geometry ensures accessible cutting angles for both external and internal turning tasks. The insert’s cylindrical hole and tolerance‑controlled form facilitate secure clamping in compatible holders; compatibility depends on insert shape, relief angle, tolerance class, fastening method, size and thickness. The double-sided chipbreaker provides two cutting edges per side, offering economical edge use and reliable chip formation when matched to material and machining parameters, which is particularly important when working with the strain‑hardening behaviour of stainless steels. Integration into machining workflows and application guidance As an ISO standard indexable component, this insert is straightforward to integrate into existing tool systems when the correct holder geometry and clamping kit are used. Selection of the chipbreaker style and the T6215 grade should follow the workpiece alloy, stability of the setup and nature of the cut; for unstable set‑ups a different geometry or a modified grade might be preferable. The insert’s 4.76 mm thickness and 11 mm size give a robust mounting footprint, and the hole‑mount design simplifies replacement and inventory management. Where required, process optimisation—cutting speeds, feeds and entry/exit strategies—will further improve edge life and surface finish. Contact Metav Werkzeuge for tailored application advice, batch supply and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the DNMG 110404 T6215 insert and suitable holder systems Technical data Article number: 6944671 SKU: 6944671-Tungaloy Manufacturer SKU: TUN6944671 Manufacturer: Tungaloy Data Cutting edge angle: 55° Corner radius: 0.4 mm Plate size: 11 mm Plate thickness: 4.76 mm Free clearance angle: 0° Special features CVD-coated carbide, grade T6215 Rhombic 55° insert, ISO DNMG110404 Double-sided chipbreaker Cylindrical mounting hole Suitable for turning stainless steels under stable conditions FAQ What materials is this insert optimised for? The DNMG 110404 T6215 insert is optimised for machining stainless steels, with the CVD coating and T6215 grade engineered to manage wear and maintain edge stability on such alloys. Is the insert compatible with common DNMG holders? Compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness; the DNMG110404 conforms to ISO dimensions to ensure fit with standard DNMG holders when these parameters match. How many cutting edges are available per insert? The indexable insert features a double-sided chipbreaker, offering multiple usable cutting edges which improves economy per insert in serial production. What advantage does the CVD coating provide? The CVD-coated layer increases thermal resistance and reduces flank wear, extending edge life and improving surface finish when turning stainless steels. Can this insert be used for interrupted cuts? The grade and geometry are suited for stable to mildly interrupted conditions; for heavy interruptions a more shock-resistant geometry or different grade may be recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com