DNMG 150404 T6215 Wendeplatten - Tungaloy
DNMG 150404 T6215 offers a durable combination of CVD-coated carbide and a 0.4 mm corner radius for consistent performance in turning applications; expect stable chip formation and good wear resistance in stainless steels. For fast tool changes and predictable results, order via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG 150404 T6215 indexable insert for turning — CVD-coated carbide, 55° DNMG 150404 T6215 is a rhombic ISO insert designed for external and internal turning in stable to lightly interrupted conditions ISO rhombic 15 format, DNMG 150404 CVD-coated carbide grade T6215 Double-sided chipbreaker for reliable chips Cylindrical hole and 0° clearance angle Consistent wear resistance for stainless-steel turning The CVD-coated carbide composition of this insert provides enhanced resistance to abrasion and built-up edge when machining stainless steels. The T6215 grade is formulated for long cutting life under stable cutting conditions and mild interruptions, which helps to reduce downtime and maintain surface quality. Choosing a wear-resistant grade minimises frequency of index changes and supports steady production throughput, while the coating improves thermal stability at higher cutting speeds. Quick compatibility and secure clamping for precise set-up Designed to the ISO DNMG 150404 form, the insert fits holders that match its rhombic 15 shape, cylindrical hole and 4.76 mm thickness; compatibility depends on form, clearance, tolerance, fixation and size. The 0° clearance angle and standard hole style allow straightforward mounting in many external holders or boring bars, enabling rapid tool changeover and consistent seating. Clear labelling of size and ISO code simplifies inventory and reduces setup errors on the shop floor. Process stability and chip control for productive turning The double-sided chipbreaker and a 0.4 mm corner radius combine to promote controlled chip formation and a reliable cutting edge geometry at the 55° approach. This configuration supports good surface finish and repeatable dimensional accuracy in general turning tasks. Use of the appropriate chipbreaker and holder stiffness is advised for best results; selecting the correct chip control based on material and cut type prevents tangled chips and improves operator safety. Ideal for workshops seeking dependable, repeatable performance. For availability, technical matching or batch requirements, contact Metav Werkzeuge for direct assistance and order support; the Metav Werkzeuge team can advise on holder compatibility and optimal cutting parameters for this Tungaloy indexable insert. Technical data Article number: 6944583 Manufacturer SKU: TUN6944583 Internal SKU: 6944583-Tungaloy Facts Shape: rhombic ISO designation: 150404 Inscribed circle: 15 Thickness: 4.76 mm Corner radius: 0.4 mm Relief/clearance angle: 0° Approach angle: 55° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD Grade: T6215 Chipbreaker: double-sided Typical application: turning Compatibility: ISO turning insert system FAQ What materials is this insert intended for? This insert is specified for machining stainless steels; the T6215 grade and CVD coating make the DNMG 150404 T6215 indexable insert well suited to wear-resistant turning of rostfreier Stahl. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker; the geometry of the chipbreaker in combination with the 0.4 mm corner radius helps to produce short, manageable chips during turning operations. Which holders are compatible with the DNMG 150404 form? Holders compatible with the DNMG 150404 form must match the rhombic 15 shape, hole style and the 4.76 mm thickness; proper matching of form, clearance and fixation ensures secure seating and repeatable results with this Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 and the ISO‑standard DNMG150404 geometry for reliable machining of stainless steels; the combination offers wear resistance, consistent surface finish and straightforward insert indexing. Order the DNMG150404 directly via Metav Werkzeuge or ask our consultants for application-specific advice. DNMG150404 T6215 DNMG — CVD-coated carbide insert for turning by Tungaloy The DNMG150404 T6215 is an ISO rhombic turning insert designed for robust stainless‑steel turning under stable to slightly interrupted conditions ISO rhombic insert, 55° cutting geometry CVD‑coated carbide grade T6215 for wear resistance Double‑sided chipbreaker for consistent chips Cylindrical‑hole mounting with 0° clearance angle Durable coating and material for extended tool life The CVD‑coated carbide T6215 grade is formulated to resist abrasive wear common when machining stainless steels, delivering longer tool life under steady cutting conditions. A CVD (chemical vapour deposition) coating forms a hard outer layer that reduces adhesive wear and helps prevent built‑up edge, which in turn maintains surface quality and reduces the need for frequent tool changes. For production environments where predictable performance and fewer interruptions are priorities, the coated cemented carbide substrate offers a measurable improvement in stand‑time compared with uncoated grades. Precise ISO geometry for predictable compatibility and secure clamping The insert follows the ISO DNMG150404 specification so compatibility with suitable external holders depends on the rhombic form, 55° approach angle, 0° clearance angle, tolerance class, fastening method and plate thickness. The 15 mm inscribed circle and 4.76 mm thickness make the insert compatible with standard DNMG holders; the cylindrical hole enables secure clamping and fast index changes. Explaining these parameters helps in selecting the correct holder: the angle and shape determine cutting edge engagement, the thickness and hole style influence how firmly the insert is retained, and the tolerance class ensures repeatable positioning for consistent part geometry. Improved chip control and process stability for stainless steels A double‑sided chipbreaker combined with the T6215 grade optimises chip formation when turning stainless steels, which are prone to work‑hardening and long, stringy chips. The chipbreaker design produces short, manageable chips that evacuate reliably, reducing the risk of surface damage or interruptions. In practical terms, this means higher effective cutting times and lower cycle variability, translating into a clearer cost‑benefit in batch production. When process stability and consistent surface finish are priorities, the interplay of geometry and coating provides the core rational advantage. Practical selection and handling for workshop efficiency Choose the insert geometry and chipbreaker variant that match material, depth of cut and machine rigidity; for slightly interrupted cuts or where edge strength is essential, the T6215 grade is a robust choice. The 0.4 mm corner radius offers a compromise between edge strength and fine finish—smaller radii yield sharper edges for fine finishing, larger radii increase edge life. Indexing the double‑sided insert reduces tooling inventory and minimises downtime. If further guidance is required on holder matching, cutting parameters or multi‑pass strategies, Metav Werkzeuge can advise on optimal setups for specific stainless‑steel grades. For tailored advice on applying the DNMG150404 T6215 insert from Tungaloy or to request availability through Metav Werkzeuge, contact our specialists at Metav Werkzeuge for precise recommendations and fast delivery. Technical Data Article number: 6950963 Manufacturer article number: 6950963 SKU: 6950963-Tungaloy Manufacturer SKU: TUN6950963 Facts Insert designation: DNMG150404 Size (inscribed circle): 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Special features CVD‑coated carbide (T6215) Rhombic plate shape (DNMG) Double‑sided chipbreaker Cylindrical hole for secure mounting ISO‑standard turning insert suitable for external and internal turning Intended for stainless steel machining under stable to slightly interrupted conditions FAQ Is this insert suitable for machining stainless steels? Yes. The DNMG150404 in grade T6215 is specifically intended for turning stainless steels, offering wear resistance and stable performance in continuous to slightly interrupted cuts. How is compatibility with a toolholder determined? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150404 follows ISO dimensions so matching a DNMG‑capable external holder with a cylindrical‑hole clamp and the correct tolerance class ensures secure fitting. What does the double‑sided chipbreaker mean for production? A double‑sided chipbreaker allows indexing both sides to form controlled, short chips, improving evacuation, reducing surface damage risk and increasing process stability in serial production. Which geometry characteristics affect surface finish and edge life? The 55° cutting approach, 0.4 mm corner radius and the CVD coating are key: the radius balances finish and edge strength, while the coating reduces adhesive wear, together improving repeatable surface quality. Can the insert be indexed and how often? The DNMG150404 design with a double‑sided chipbreaker is indexable; when one cutting edge wears, the insert can be rotated or reversed according to the holder design to present a fresh edge, maximising usable edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
With its CVD-coated T6215 grade and ISO DNMG150404 geometry, the insert delivers robust wear resistance, consistent chip control and reliable performance for turning stainless steels; compatibility with standard holders ensures quick, repeatable index changes. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific guidance. DNMG150404 T6215 DNMG turning insert — Turning application, Tungaloy A DNMG150404 T6215 ISO turning insert designed for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. ISO DNMG150404 geometry CVD-coated cemented carbide T6215 0° clearance angle, 55° included angle Double-sided chipbreaker, rhombic form Durable coating and grade for consistent productivity The T6215 grade is a CVD-coated cemented carbide formulated to extend tool life when machining stainless steel. The CVD coating forms a hard, wear-resistant surface that reduces flank wear and improves resistance to built-up edge, which in turn maintains cutting performance over longer production runs. For manufacturing environments where consistent surface finish and fewer index changes matter, this insert supports a steady production flow and reduces the need for frequent tool replacements, helping to improve overall process efficiency. Geometry and clamping for precision and repeatability The ISO DNMG150404 geometry with a 55° included angle and 0.4 mm corner radius provides a balanced cutting edge for general turning tasks. With a 4.76 mm plate thickness and a cylindrical hole for secure fixing, the insert is compatible with ISO-type holders when form, relief angle, tolerance class, size and thickness match. The 0° clearance specification requires the correct holder relief to ensure proper seating; when mounted correctly, the rhombic shape and double-sided chipbreaker support stable chip formation and repeatable positional accuracy, delivering predictable part tolerances and surface quality. Practical guidance for selection and application Intended primarily for turning operations, the insert performs best under stable to slightly interrupted cuts; selecting the appropriate chipbreaker and the T6215 grade according to workpiece material and machining stability will optimise results. The double-sided design allows economical indexing, and the cylindrical-hole fixing aids quick replacement during production. For customers who prefer precise recommendations: match the insert to an approved holder with the same ISO geometry and verify clamping clearance. This approach ensures reliable tool behaviour, improved surface finish and reduced cycle-time variability. For reliable stainless steel turning with Tungaloy’s T6215 CVD-coated carbide, contact Metav Werkzeuge for tailored application advice and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6875555-Tungaloy Manufacturer article number: 6875555 Manufacturer SKU: TUN6875555 Model series: ISO turning inserts Material: Cemented carbide Grade/coating: T6215, CVD-coated Facts Insert designation: DNMG150404 ISO code: 150404 Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 55° Hole style: cylindrical hole Special features Rhombic insert shape (DNMG) Double-sided chipbreaker With hole for secure fixing Suited for external and internal turning Optimised for stainless steel under stable to slightly interrupted conditions Compatible with ISO holders when form and dimensions match FAQ Which materials is this insert best suited for? The DNMG150404 T6215 insert is optimised for machining stainless steel, offering enhanced wear resistance and stable chip control in those applications. How does the T6215 CVD coating benefit production? The T6215 CVD coating improves wear resistance and reduces built-up edge, which helps maintain cutting performance and extend the useful life of the indexable insert. What holder characteristics are required for safe clamping? Secure clamping requires an ISO-compatible holder with matching form, relief angle, tolerance class, size and thickness so that the DNMG150404 seats correctly and the 0° clearance specification is accommodated. Is the insert reversible and how does that affect economy? The double-sided design allows indexing to a fresh cutting edge, so the DNMG150404 insert can be rotated to extend service life and reduce tooling costs per part. Which cutting conditions suit this insert? The insert is intended for stable to slightly interrupted turning operations; pairing the correct chipbreaker and machining parameters with T6215 maximises surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide and ISO conformity for productive steel turning with reliable chip control and fast insert changes. The wear‑resistant T9205 grade and rhombic 55° geometry support stable, high‑speed operations. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. DNMG150404 T9205 DNMG Turning Insert by Tungaloy DNMG150404 T9205 Tungaloy insert for ISO‑standard external and internal turning, optimised for productive steel machining under stable conditions CVD‑coated carbide grade T9205 Optimised for productive steel turning Double‑sided chipbreaker for reliable chips ISO DNMG 55° rhombic form with 0.4 mm radius Faster cycle times through a wear‑resistant CVD grade The CVD‑coated carbide construction delivers improved wear resistance and thermal stability, which allows for higher cutting speeds under stable conditions without premature edge breakdown. The T9205 grade is formulated for productive turning of steel, reducing frequency of insert changes and increasing uptime. The 0.4 mm corner radius balances edge strength and surface finish, helping to achieve consistent part quality while maintaining economical tool life. Stable cutting and controlled chip formation for fewer interruptions A double‑sided chipbreaker provides predictable chip formation and evacuation, cutting the risk of entanglement and machine stoppages during continuous turning cycles. The rhombic 55° geometry supports both external and internal turning operations, while the positive clearance (0° relief) contributes to low cutting forces in many set‑ups. Selecting the appropriate chipbreaker and grade for the workpiece material leads to measurable productivity gains and reduced scrap rates. ISO standard design for quick tooling changes and compatibility As an ISO‑standard insert, the component is compatible with a wide range of holders when the form, clearance angle, tolerance class, fastening method, size and thickness match. The plate thickness of 4.76 mm and nominal size 15 mm, together with the cylindrical hole, ensure secure fastening and repeatable seating in recognised toolholders. This interchangeability simplifies inventory management and shortens set‑up times on the shopfloor, supporting lean production practices. For productive steel turning with Tungaloy's CVD‑coated DNMG150404 T9205 insert, contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6785703 SKU: 6785703‑Tungaloy Manufacturer SKU: TUN6785703 Brand: Tungaloy Designation: DNMG150404 T9205 Tungaloy insert Model series: ISO turning inserts Facts Corner radius: 0.4 mm Insert geometry: 55° rhombic Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features CVD‑coated carbide (grade T9205) Double‑sided chipbreaker Rhombic plate shape Cylindrical hole for fastening ISO‑standard insert for turning Intended application: turning (external and internal) Optimised for steel under stable conditions FAQ What materials is this insert suitable for? The DNMG150404 T9205 insert by Tungaloy is a CVD‑coated carbide grade optimised for productive machining of steel under stable cutting conditions. Can the insert be used for both external and internal turning? Yes. The 55° rhombic form supports external and internal turning operations and is designed for versatile use in standard toolholders. What are the corner radius and plate thickness of this insert? The insert features a 0.4 mm corner radius and a plate thickness of 4.76 mm, consistent with DNMG150404 dimensions. How is the insert secured in the holder? The insert has a cylindrical hole for fastening; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness between insert and holder. Is the insert reversible to use both cutting edges? Yes. The double‑sided design permits indexing to a fresh cutting edge, extending usable life and lowering tooling costs for the Tungaloy DNMG150404 T9205 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9205 Wendeplatten - Tungaloy
Benefit from the combination of long tool life, stable chip control and ISO compatibility for reliable turning performance; the CVD-coated T9205 grade delivers wear resistance and productivity in steel machining and the rhombic geometry ensures straightforward mounting in standard holders — order the DNMG150404 T9205 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150404 T9205 — Turning insert (DNMG 150404) by Tungaloy The DNMG150404 T9205 is an ISO-standard rhombic turning insert designed for productive external and internal turning of steel under stable machining conditions. CVD-coated carbide T9205 for wear resistance ISO rhombic DNMG 150404 geometry Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius; 4.76 mm plate thickness Higher throughput with consistent chip control The CVD-coated carbide T9205 grade is formulated for productive steel machining at elevated cutting speeds, offering improved wear resistance compared with uncoated grades. The rhombic DNMG form, combined with a double-sided chipbreaker, supports repeatable chip control and stable cutting forces, which reduces interruption and increases effective machining time. In practical terms, choosing this geometry and grade helps maintain surface quality and reduces rework rates in stable setups, contributing directly to higher shop-floor productivity. Straightforward compatibility and secure clamping Compatibility with toolholders is determined by form, clearance, tolerance class, fastening method, size and thickness; this ISO insert conforms to those standards, making selection and replacement predictable. The 0° clearance specification and 4.76 mm plate thickness match common DNMG holder designs, while the cylindrical hole ensures secure retention with standard screws. This conformity simplifies stocking and reduces the risk of incorrect mounting, so setups are completed faster and safely without the need for special adapters. Coating and geometry that extend tool life The combination of a CVD-coated carbide substrate and the T9205 grade provides resistance to abrasive wear during continuous turning of steel. The modest 0.4 mm corner radius balances edge strength and finishing capability, while the 55° approach angle offers favourable cutting force distribution for many turning tasks. These features mean longer intervals between indexings and replacements, lowering downtime and consumable usage. The insert’s double-sided design also delivers cost efficiency through reversible use of both cutting edges. Practical guidance for productive use For best results, select the chipbreaker and grade to match material, cut depth and machine rigidity; this insert excels in stable setups where higher cutting speeds are achievable. When roughing, favour slightly higher feeds with robust clamping and ensure coolant or appropriate cutting data to manage temperatures. For finishing, the 0.4 mm radius gives fine surface results when combined with controlled feeds. If material mix or component geometry varies, pairing the ISO insert with the correct holder and clamping set ensures repeatable outcomes and predictable tool life. For productive steel turning trust the Tungaloy DNMG150404 T9205 insert — contact Metav Werkzeuge for a tailored recommendation or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785705 SKU: 6785705-Tungaloy Manufacturer SKU: TUN6785705 Core specifications ISO designation: 150404 Geometry: DNMG (rhombic) Corner radius: 0.4 mm Plate thickness: 4.76 mm Size: 15 mm Approach angle: 55° Features / Materials Material: carbide Grade/coating: T9205 (CVD-coated carbide) Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The DNMG150404 T9205 insert is optimised for machining steel; the T9205 CVD-coated carbide provides enhanced wear resistance under stable cutting conditions. Is the insert reversible and how many edges are usable? The DNMG150404 insert is double-sided with a chipbreaker on both faces, offering multiple usable cutting edges before indexing. Which holder features are required for correct mounting? Compatibility is determined by ISO form, fastening, tolerance and thickness; the insert’s cylindrical hole and 4.76 mm thickness fit standard DNMG holders designed for ISO 150404. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a balance between edge strength and finish quality, enabling improved surface results in finishing passes when feed and speed are controlled. How does the T9205 grade affect tool life? The T9205 CVD-coated carbide grade increases resistance to abrasive wear during steel turning, resulting in longer intervals between indexings and reduced consumable costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 and the ISO-standard geometry for a consistent balance of wear resistance and fracture toughness, ensuring productive medium-steel turning with reliable tool life. Order the DNMG150404 T9215 insert directly via Metav Werkzeuge or ask our consultants if application support is required. DNMG150404 T9215 – ISO turning insert, CVD-coated carbide by Tungaloy DNMG150404 T9215 is an ISO rhombic turning insert engineered for external and internal turning of medium steels, offering high wear resistance and toughness for continuous to lightly interrupted cuts ISO rhombic insert DNMG 150404 T9215 CVD-coated carbide for medium steel machining 0.4 mm nose radius, 55° cutting angle Double-sided chipbreaker, cylindrical hole Productive medium-steel turning with CVD-coated carbide The indexable insert is built from carbide with a CVD coating and the T9215 grade, which combines elevated wear resistance with reliable fracture toughness. This composition makes the insert particularly suitable for medium-steel machining where sustained productivity is required; it performs well in continuous cuts and tolerates slight interruptions without rapid edge failure. The coating provides a hard, wear-resistant layer applied by chemical vapour deposition, which reduces adhesive wear and helps maintain cutting-edge integrity over longer production cycles. The result is a stable process with predictable tool life and fewer insert changes, supporting efficient shop-floor planning. Seamless compatibility and simple tool system integration As an ISO-standard insert, compatibility with toolholders is determined by the insert shape, relief angle, tolerance class, clamping method, size and thickness. The rhombic form with a 55° cutting angle and a 0.4 mm nose radius suits a wide range of standard DNMG holders and boring bars; the insert is supplied with a cylindrical centre hole for positive clamping. In practice this means straightforward replacement in existing external holders or boring bars, and the system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Clear adherence to these geometric parameters ensures correct seating, repeatable positioning and secure clamping during high-production cycles. Practical application advice for consistent surface quality and efficiency The 0.4 mm nose radius offers a compromise between edge strength and surface finish: it gives sufficient robustness for medium cuts while still producing acceptable surface integrity at moderate feeds. The double-sided chipbreaker supports effective chip control and economical use of both cutting edges, doubling available indexings per insert. Select the chipbreaker and grade to match workpiece stability and the nature of the cut—stable set-ups and continuous feeds favour higher productivity, whereas interrupted cuts may benefit from more conservative feeds and rigid clamping. With correct selection and mounting, users can expect improved process stability, consistent surface finish and reduced downtime for insert changes. For reliable medium-steel turning with Tungaloy quality, contact Metav Werkzeuge for ordering and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796070 Manufacturer SKU: TUN6796070 Merchant SKU: 6796070-Tungaloy Model series: ISO turning indexable inserts Key measurements Insert designation: DNMG150404 Size: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Cutting angle: 55° Hole: with cylindrical hole Features / Applications Grade: T9215 Material: CVD-coated carbide Insert shape: rhombic Chipbreaker: double-sided Typical application: external and internal turning of medium steel System composition: ISO insert, matching holder or boring bar, shim/clamp set, spare screws FAQ Is this insert suitable for internal boring as well as external turning? The DNMG150404 T9215 insert is designed for both external and internal turning applications; compatibility with internal boring bars depends on matching the insert geometry and clamping configuration. What are the main benefits of the T9215 grade? The T9215 CVD-coated carbide grade offers a balance of wear resistance and fracture toughness, making it a first choice for productive medium-steel machining with consistent edge life. How does the 0.4 mm nose radius affect the cutting result? A 0.4 mm radius provides increased edge strength compared with smaller radii and yields a good compromise between surface finish and robustness for general turning operations. Can both sides of the insert be used? Yes, the insert features a double-sided chipbreaker, allowing indexing of both cutting edges to maximise economy and reduce tooling costs. What should be checked to ensure proper holder compatibility? Verify the holder accepts the DNMG form, the 55° entry angle, the insert size and thickness, the relief angle and the clamping interface; correct matching guarantees secure seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Benefit from a combination of robust CVD-coated carbide and precise DNMG geometry to increase throughput and reduce tool change frequency; order the insert directly via Metav Werkzeuge or consult their specialists for application support. DNMG 150404 T9215 – ISO turning insert for medium steel, Tungaloy The DNMG150404 T9215 is an ISO-standard rhombic turning insert engineered for external and internal turning operations, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. Tungaloy CVD-coated carbide T9215 High wear resistance and fracture toughness Double-sided chipbreaker, rhombic insert 0.4 mm corner radius, 55° cutting angle Consistent productivity for medium steel turning The CVD-coated carbide grade T9215 is formulated to deliver high wear resistance while retaining sufficient toughness for demanding production runs. In practice, this means fewer index changes and longer tool life under continuous cutting conditions, which translates directly into improved machine uptime. The cutting material is optimised for medium-strength steels and performs reliably under slightly interrupted cuts, enabling higher feed rates and sustained throughput without compromising edge integrity. This technical pairing supports predictable tool-change intervals and more stable process planning on the shop floor. Geometry that ensures repeatable part quality The rhombic DNMG shape with a 55° cutting angle and 0.4 mm corner radius combines accessibility for external and internal contours with a cutting-edge geometry that helps produce consistent surface finishes. The insert is manufactured to ISO-standard dimensions and features a cylindrical centre hole for secure clamping. Compatibility with a holder depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; these parameters are decisive for repeatable positioning and concentricity. Explained simply, matching the insert to a correctly rated external holder or boring bar reduces vibration and supports tighter dimensional control on turned components. System-level efficiency and practical selection guidance Operational efficiency is achieved by considering the full tooling system: indexable insert, compatible external holder or boring bar, underlay/clamp set and replacement screws. The double-sided chipbreaker increases usable edges per insert and helps control chip form, easing evacuation and reducing the risk of re-cutting. For applications with limited rigidity choose a chipbreaker and grade that favour smoother chip flow; for stable setups the T9215 grade enables more aggressive cutting parameters. Advice on selecting the appropriate chipbreaker and matching the insert to machine dynamics supports predictable cycle times and fewer interruptions for rework or tool changes, improving overall process economy. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy DNMG150404 T9215 insert and to arrange supply by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6772239 Manufacturer SKU: TUN6772239 SKU: 6772239-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150404 Grade: T9215 Material: Hartmetall (carbide) Coating: CVD Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Hole: with hole (cylindrical) Special features Rhombic insert form Double-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning Optimised for medium steel machining System: insert + holder/boring bar + underlay/clamp + screws FAQ What materials is this insert best suited for? The Tungaloy DNMG150404 T9215 insert is optimised for medium-strength steels; the T9215 grade combines wear resistance and toughness for productive turning. How many cutting edges are available per insert? With a double-sided chipbreaker design the insert provides multiple indexable edges, increasing usable life before disposal. What determines compatibility with a tool holder? Compatibility is defined by the insert form, relief angle, tolerance class, clamping method, size and thickness; the DNMG150404 follows ISO standards for consistent fitment. Can this grade handle slightly interrupted cuts? Yes, the CVD-coated T9215 grade is suitable for continuous to lightly interrupted cutting conditions, offering reliable edge security. What system components are required for mounting? A matched external holder or boring bar, an underlay/clamp set and the correct replacement screws complete the system for secure mounting of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide and a robust geometry to achieve reliable tool life and steady component quality in medium-steel turning; order directly via Metav Werkzeuge or request advice from our technical consultants for holder compatibility and chipbreaker selection. DNMG 150404 T9215 — indexable turning insert for turning, Tungaloy DNMG150404 T9215 is an ISO-conforming indexable turning insert designed for external and internal turning in medium-steel applications, supplied as a rhombic plate with a cylindrical centre hole for secure clamping. CVD-coated cemented carbide T9215 Optimised for medium steel turning Rhombic plate with 55° lead angle Double-sided insert with cylindrical hole Consistent productivity through a balanced cutting grade The combination of a CVD-coated substrate and the T9215 grade provides an engineered balance of wear resistance and edge toughness that supports sustained production runs. This cutting grade is targeted at medium-steel machining where controlled abrasion and reduced chipping extend in-service life, reducing unscheduled tool changes. As a result, cycle times become more predictable and process capability improves, which benefits batch production and repetitive turning tasks. Geometry that stabilises cutting and secures clamping A rhombic plate form with a 55° lead angle ensures a stable entry angle on profiles and contours, while the 0° clearance geometry promotes economical engagement on turning operations. The insert is supplied with a cylindrical hole to match indexed clamping systems and measures 15 mm across with a plate thickness of 4.76 mm and a 0.4 mm corner radius, enabling modest finishing passes and consistent seating in compatible holders. Correct matching of form, clearance, tolerance class, clamping and thickness is essential for repeatable tool life and process stability. Practical system benefits for workshop workflow The double-sided design and integrated chipbreaker concept allow rapid indexation and straightforward inventory management, reducing downtime during tool changes. When combined with a suitable holder, shim and fastening hardware, the insert forms part of a compact system that simplifies setup and repeatable performance. For continuous to lightly interrupted cuts in medium-steel, the built-in robustness supports higher material removal rates while maintaining surface integrity and predictable edge life. For process-focused medium-steel turning with proven tool-life benefits, contact Metav Werkzeuge for tailored advice and to secure Tungaloy DNMG150404 T9215 inserts; technical consultation on holder compatibility and chipbreaker choice is available at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6773912 SKU: 6773912-Tungaloy Manufacturer SKU: TUN6773912 Manufacturer: Tungaloy Facts Designation: DNMG150404 Size: 15 Plate thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 55° Relief (clearance) angle: 0° Special features Material: cemented carbide (Hartmetall) Grade/coating: T9215, CVD-coated Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts FAQ What holder types are compatible with this insert? Compatibility depends on the holder form and clamping method; the DNMG150404 T9215 insert is intended for holders matching a rhombic DNMG plate with a cylindrical hole and the listed thickness and tolerance class. Which materials is this grade best suited for? The T9215 CVD-coated grade is optimised for medium-steel machining, offering a balance of wear resistance and edge strength for continuous to lightly interrupted turning operations. Can the insert be used for interrupted cuts? Yes, the T9215 grade combines toughness and wear resistance suitable for continuous machining and light interruptions; heavier interruptions require assessment of stability and may need an alternative grade. How many usable edges does the plate provide? The reversible, double-sided design grants multiple indexable cutting edges, allowing quick rotation to a fresh edge and efficient inventory management. How should the chipbreaker be selected? Select the chipbreaker geometry according to workpiece material, feed and stability; the DNMG150404 T9215 insert is supplied with a double-sided chipbreaker, and optimising chip control improves surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated T9215 grade, robust fracture resistance and a precise 0.4 mm corner radius to maintain productivity and repeatability in turning operations; order the DNMG150404 T9215 Tungaloy insert directly via Metav Werkzeuge or consult their specialists for application support. DNMG 150404 T9215 — ISO turning insert (rhombic 55°) by Tungaloy The DNMG150404 T9215 Tungaloy insert is an ISO‑standard rhombic turning insert engineered for external and internal turning in medium‑duty applications CVD-coated carbide grade T9215 Optimised for medium Stahl machining Rhombic 55° geometry, 0° clearance Double-sided with cylindrical hole Longer tool life through a wear-resistant coating The CVD‑coated T9215 carbide combines high wear resistance with dependable fracture toughness, which results in extended tool life during continuous to slightly interrupted turning. The chemical vapour deposition layer provides a hard, wear‑resistant surface that reduces flank wear at elevated cutting speeds; this leads to fewer indexings, more stable process windows and a measurable improvement in productivity. For production environments seeking consistent throughput, the coated substrate sustains more aggressive cutting parameters without sacrificing component quality. Stable geometry for consistent surface finish and accuracy A rhombic 55° geometry and a 0.4 mm corner radius deliver repeatable cutting engagement and reliable part profile control, while the 0° clearance supports effective chip formation on typical turning cycles. The insert’s double‑sided design and the cylindrical hole enable secure mounting and cost‑efficient use of both cutting edges. The 4.76 mm plate thickness contributes to rigidity under load, helping to reduce vibration and produce a better surface finish with predictable dimensional results on turned features. Designed for productive Stahl turning with balanced toughness This grade was developed as a first choice for medium Stahl machining, combining high wear resistance with the mechanical strength to resist chipping under varying cutting conditions. The material pairing of coated carbide and the Tungaloy substrate encourages higher metal removal rates and stable tool life in series production. For shops transitioning from general‑purpose grades, the T9215 grade offers a balance between long life and secure edge integrity, allowing process engineers to increase cutting speeds or extend tool change intervals while maintaining part quality. Clear guidance on selection and system compatibility Compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO system includes the insert, a matching external holder or boring bar, a support shim/clamping set and replacement screws. Select a chipbreaker that matches the workpiece material and the machining mode, and prefer a grade suited to continuous or slightly interrupted cuts for optimum results. Assistance with holder matching and process parameters is available from Metav Werkzeuge’s technical advisors, ensuring an efficient integration into existing turning centres. For reliable, productive turning with Tungaloy CVD‑coated DNMG inserts, contact Metav Werkzeuge for stock status and matching holder recommendations: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6950961 Manufacturer SKU: TUN6950961 Merchant SKU: 6950961-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Facts Cutting angle: 55° Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: cylindrical Special features CVD‑coated carbide, grade T9215 Rhombic plate form Double‑sided, with central cylindrical hole Intended application: external and internal turning Optimised for medium Stahl machining Compatible with ISO external holders and boring bars System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ Which materials is this insert best suited for? The DNMG150404 T9215 Tungaloy insert (SKU 6950961‑Tungaloy) is optimised for medium Stahl machining, offering a balance of wear resistance and toughness for common steels. Can the insert be used for interrupted cuts? Yes, the T9215 grade is suitable for continuous to slightly interrupted cuts; its fracture resistance helps maintain edge integrity under light interruptions. How many cutting edges are available per insert? The DNMG150404 is double‑sided, providing multiple indexable cutting edges and improving cost efficiency per edge on production runs. What does the 0.4 mm corner radius affect in machining? A 0.4 mm corner radius improves strength at the insert tip and helps achieve robust edge strength for roughing and medium finishing passes without excessive stress concentration. Which holder features are required for secure clamping? Secure compatibility is achieved when the holder matches the insert form, relief angle, tolerance class, fastening method, size and thickness; Metav Werkzeuge can advise on the correct holder selection. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance combined with a 0.4 mm corner radius for consistent surface finish and reliable chip control; order via Metav Werkzeuge or consult our technical team for application-specific recommendations. DNMG 150404 T9215 ISO turning insert — CVD-coated carbide, 55° lead angle (Tungaloy) DNMG150404 T9215 is an ISO-form indexable turning insert for external and internal turning applications, optimised for medium-steel machining with a double-sided chipbreaker and a central hole for secure clamping. CVD-coated carbide grade T9215 0.4 mm corner radius for consistent finish Rhombic insert, 55° lead angle Double-sided chipbreaker for stable chips High productivity through wear-resistant grade and reliable cutting The CVD-coated T9215 grade combines a hard, wear-resistant coating with a tough carbide substrate to deliver extended tool life during continuous and lightly interrupted cuts. This composition means longer tool cycles and fewer indexings, directly supporting higher throughput on medium-steel components. The combination of wear resistance and fracture toughness reduces unscheduled tool changes and contributes to a predictable process capable of maintaining dimensional tolerance under standard production loads. Precise geometry for repeatable surface quality and secure seating A 0.4 mm corner radius and the 55° lead angle result in a stable cutting geometry that balances edge strength and surface finish. The rhombic plate form and central, cylindrical hole permit secure clamping in compatible holders; compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness. The double-sided chipbreaker supports uniform chip formation and evacuation, which helps achieve consistent component surfaces while reducing the risk of built-up edge on medium steels. System-based approach and practical application guidance The insert is supplied as an ISO-standard component intended for use with a matching external holder or boring bar, an underlay/clamping set and replacement screws. The cylindrical central hole and standard dimensions (15 mm inscribed circle, 4.76 mm thickness) simplify integration into existing tool systems. When selecting the chipbreaker and grade, match the T9215 to the workpiece material and the machine stability—this choice ensures optimum balance between tool life and productivity. For specialised machining conditions, an alternative chipbreaker or a different grade may be preferable. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DNMG150404 T9215 indexable insert; call +49 2822 7131930 or email info@metav-werkzeuge.com for recommendations and availability Technical data Article number: 6772259 Manufacturer SKU: TUN6772259 Product SKU: 6772259-Tungaloy Designation: DNMG150404 T9215 Facts Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle: 0° Special features Material: CVD-coated carbide (T9215) Plate form: rhombic Chipbreaker: double-sided Hole: cylindrical central hole (with hole) System: ISO-standard indexable turning insert Application: turning (external and internal) FAQ Which materials suit this insert best? The Tungaloy DNMG150404 T9215 indexable insert is primarily intended for medium-steel machining, where its combination of wear resistance and toughness delivers reproducible performance. Is the insert reversible and how many cutting edges are available? This is a double-sided insert with two usable cutting edges per side, allowing multiple reindexes before replacement of the plate. What determines holder compatibility for the insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150404 is ISO-standard and fits holders specified for DNMG 150404 geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness combined with a 0.4 mm corner radius ensure consistent productivity in medium-steel turning; the CVD-coated carbide grade and rhomboid 55° geometry provide simple integration into ISO tooling systems. Order directly via Metav Werkzeuge or consult their specialists for material-specific recommendations. DNMG150404 T9215 — Indexable Turning Insert, CVD-coated Carbide, Tungaloy The DNMG150404 T9215 is an ISO rhomboid indexable insert for external and internal turning, designed for medium-steel applications and continuous to light interrupted cuts. CVD-coated carbide grade T9215 Double-sided rhomboid insert with cylindrical hole 0.4 mm corner radius for versatile turning 55° cutting angle for standard holders Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 combines high wear resistance with defined fracture toughness, delivering stable performance on medium steels. For machining operations that require reliable cycle times, this insert sustains cutting parameters during continuous and lightly interrupted passes, reducing the need for frequent index changes. The coating supports elevated cutting speeds, which contributes to improved throughput and predictable tool life. Designed for straightforward integration and secure clamping Built to the ISO standard rhomboid form, this insert features a 55° included angle and a cylindrical hole, ensuring compatibility with common external holders and boring bars when matchÂing form, clearance angle, tolerance class, fastening and thickness. The double-sided design allows for economical indexability and simpler inventory management, while the nominal relief of 0° must be considered when selecting the mating toolholder to maintain correct rake and clearance. Stable chip control and reliable surface quality The insert’s geometry and double-sided chipbreaker layout promote consistent chip control and reduce vibration during routine turning, which helps to achieve the desired surface finish with fewer corrective passes. The 0.4 mm corner radius offers flexibility for general turning profiles, combining edge strength with the potential for fine finishing. Selecting the appropriate chipbreaker and grade according to component material and machining stability optimises results. Efficient system setup and practical handling As part of an ISO turning insert series, the cutting system comprises the insert, a matching external holder or boring bar, shims/clamping kit and replacement screws. The CVD coating is a chemical vapour deposition layer applied to enhance thermal and abrasive resistance, translating into longer tool life and reduced downtime. For applications in production environments, the combination of robust substrate and CVD surface treatment supports sustained productivity and cost-efficient operation. For tailored advice on selecting the correct Tungaloy grade and for availability, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772227 Manufacturer SKU: TUN6772227 SKU: 6772227-Tungaloy Model series: ISO turning insert series Facts Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm ISO designation: 150404 Hole: with cylindrical hole Special features CVD-coated carbide grade T9215 Double-sided with chipbreaker Rhomboid plate form ISO-standard turning insert Intended application: turning Suitable for continuous to light interrupted cuts Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DNMG150404 T9215 indexable insert (Tungaloy, SKU 6772227-Tungaloy) is intended primarily for medium steels; the CVD-coated carbide grade supports high wear resistance in these materials. How does the double-sided design affect usability? The double-sided geometry of the DNMG150404 insert extends indexability, allowing multiple cutting positions before disposal and simplifying stock management for production environments. What does the 0.4 mm corner radius mean for machining? A 0.4 mm corner radius provides a balance between edge strength and surface finish; it is suitable for general turning operations where both durability and acceptable finish are required. Are there special holder requirements for this insert? Compatibility depends on the insert’s rhomboid form, 55° cutting angle, relief angle and thickness; matching holders and a proper clamping kit ensure secure fixation and correct cutting geometry for the DNMG150404 T9215. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Taking advantage of CVD-coated carbide and a 0.4 mm corner radius, this insert combines high wear resistance with good edge strength for sustained productivity in medium steel turning; order directly via Metav Werkzeuge or consult the technical team for process matching. DNMG 150404 T9215 turning insert for turning — Tungaloy A DNMG150404 T9215 ISO‑standard turning insert engineered for external and internal turning in medium‑range steel machining. CVD‑coated carbide for high wear resistance Suited to medium steel machining Rhombic geometry with 0.4 mm corner radius Cylindrical hole and 4.76 mm plate thickness Longer tool life through optimised grade and coating The supplied grade combines CVD‑coated surface technology with a robust carbide substrate, delivering high wear resistance while preserving fracture toughness during continuous or lightly interrupted cuts. This formulation is intended as a first choice for medium‑range steel applications, where consistent metal removal rates and predictable tool life reduce unplanned downtime. The chemistry and coating are designed to balance abrasive wear resistance with the ability to resist chipping at the cutting edge, which supports more stable cycle times and fewer tool changes. Secure clamping and ISO‑compatibility for flexible set‑ups Built to ISO dimensions, the insert’s form and tolerance class allow reliable fitment in standard holders; compatibility is determined by shape, relief angle, fastening style, size and thickness. The rhombic geometry and the cylindrical hole enable secure seating and repeatable positioning when paired with a suitable outer holder or boring bar. A 0° relief angle and a plate thickness of 4.76 mm provide robust support under radial loads, so clamping stability is improved and insert life is extended in routine turning operations. Predictable surface quality with controlled edge geometry A 0.4 mm corner radius gives a balance between edge strength and finish: it supports vibration damping and increases edge durability while still permitting acceptable surface quality on shafts and bores. The double‑sided chipbreaker design allows reversible use of the cutting edges, doubling available edges per insert and contributing to economical machining. When selecting a chipbreaker and grade, match the breaker profile to the material and the intended feed and depth of cut to ensure consistent swarf control and surface finish. System approach for efficient tool management The insert is intended to be used as part of a system: an ISO‑standard indexable insert, the respective external holder or boring bar, a suitable shim or clamping set, and replacement screws form the full assembly. Standardised geometry eases inventory management and simplifies spindle‑side tooling changes. Where higher demands arise, density of the carbide substrate and coating properties make this insert suitable for ramped feeds or frequent starts and stops within its rated application range. For technical advice on process parameters or to source genuine Tungaloy inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt supply. Technical Data Article number: 6772222 SKU: 6772222-Tungaloy Manufacturer SKU: TUN6772222 Designation: DNMG150404 Facts Cutting edge angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Corner radius: 0.4 mm Special features Material: carbide Coating: CVD Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Grade/sort: T9215 Application: turning Model series: ISO turning inserts FAQ Which materials is this insert suitable for? The DNMG150404 T9215 insert is optimised for medium steel machining; the CVD coating and carbide substrate provide wear resistance and edge security for continuous to lightly interrupted cuts. Is the insert reversible and how many cutting edges are available? Thanks to the double‑sided chipbreaker, the insert offers two effective cutting edges per side, allowing multiple indexings before disposal. What clamping features must the holder provide? A holder must match the rhombic form, plate size and thickness; the cylindrical hole requires a compatible fastening arrangement to ensure repeatable seating and axial support. How does the corner radius affect finish and tool life? The 0.4 mm corner radius improves edge strength and reduces chipping risk while delivering a practical surface quality for shafts and bores in steel components. Can this insert be used for interrupted cuts? The T9215 grade is suitable for continuous and slightly interrupted cuts; for heavy interruptions, consider a grade and chipbreaker combination tailored to the specific load case. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide for high wear resistance and a 0.4 mm corner radius for predictable surface finish and controlled cutting forces; compatible with ISO holders by form, clearance angle and thickness. Order the insert directly via Metav Werkzeuge or ask the consultants if application advice is required. DNMG 150404 T9215 ISO turning insert by Tungaloy — CVD-coated carbide, 55° rhombic geometry DNMG150404 T9215 is an ISO-form indexable insert for turning applications, designed for medium-steel machining with continuous to lightly interrupted cuts. CVD-coated carbide T9215 for wear resistance Rhombic 55° geometry for versatile turning 0.4 mm corner radius for fine finishes Double-sided chipbreaker for extended use Consistent productivity through robust coating and substrate The combination of a CVD-coated carbide grade and a balanced substrate delivers consistent cutting performance in medium-steel machining. The T9215 grade is formulated to provide elevated wear resistance while maintaining sufficient fracture toughness, which supports higher productivity in continuous to lightly interrupted cuts. The coating reduces adhesion and abrasive wear, so tool life is stabilised and process variability is reduced. This makes the insert a reliable option where repeatable results and uptime are priorities. Geometry and holder compatibility that simplify tool selection The rhombic, 55° ISO indexable form offers a flexible tool geometry suitable for a wide range of external and internal turning tasks. With a 0.4 mm corner radius and a plate thickness of 4.76 mm, the insert produces a controlled cutting edge that helps achieve improved surface quality and dimensional stability. Compatibility with the chosen holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; these parameters are stated so that matching to standard DNMG holders is straightforward and verifiable. Practical advantages in the workshop and production line Designed as a double-sided, reversible insert with a cylindrical hole, the component supports economical index changes and reduces tooling stock. The double-sided chipbreaker maintains consistent chip control across both cutting edges, improving process security and reducing the risk of unexpected interruptions. For production environments seeking a balance of performance and economy, the insert helps lower per-part tooling cost through repeatable edge life and predictable wear behaviour. Technical advisors can assist with parameter selection to further extend life under specific machine and workpiece conditions. Contact Metav Werkzeuge for application-tailored recommendations or to place an order for DNMG150404 T9215; assistance is available by email or phone and technical consultation can be provided to ensure optimal process integration. Technical data Article number: 6775264 Manufacturer SKU: TUN6775264 SKU: 6775264-Tungaloy Manufacturer article number: 6775264 Facts Geometry angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size (inscribed circle): 15 mm Clearance angle: 0° ISO code: 150404 Special features Material: carbide Grade/coating: T9215 (CVD-coated) Plate shape: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO-indexable insert, reversible design FAQ What machining tasks is this insert best suited to? The DNMG150404 T9215 insert is optimised for turning of medium steels and performs well in continuous to lightly interrupted cuts, offering a balanced combination of wear resistance and toughness. How does the T9215 coating help in production? The T9215 CVD coating reduces abrasive and adhesive wear, improving edge life and process stability so that the insert delivers consistent performance across production batches. Can the insert be used in standard DNMG holders? Compatibility is governed by form, clearance angle, tolerance class, fastening and thickness; when matched to holders specified for DNMG150404, the insert is suitable for standard DNMG toolholders. How many cutting edges are available per insert? The insert is double-sided with a reversible configuration and a double-sided chipbreaker, allowing multiple indexing operations before replacement. Is the insert suitable for interrupted cuts? The grade and construction of this insert allow use in lightly interrupted cuts; for heavily interrupted machining, specific application testing is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, rhombic 55° geometry and a 0.4 mm nose radius for consistent productivity in turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150404 T9215 indexable insert for Turning — Tungaloy DNMG150404 T9215 is a CVD-coated carbide indexable insert for ISO-standard turning applications, designed for efficient medium steel machining. CVD-coated carbide for high wear resistance Designed for medium steel machining Rhombic 55° geometry, 0° relief Double-sided insert with cylindrical hole Higher throughput for medium steel with consistent tool life The CVD-coated carbide grade T9215 combines high wear resistance with controlled fracture behaviour, making it a reliable choice for steady production environments. Suited to continuous and slightly interrupted machining, the grade offers sustained edge life under moderate cutting parameters, helping to reduce changeover frequency and improve spindle uptime. This results in a measurable increase in productivity when paired with the correct holder and stable setup. Precision geometry that delivers repeatable part quality The rhombic 55° geometry with 0° relief and a 0.4 mm nose radius provides a predictable cutting profile and surface finish, especially on external contours and shoulder work. The insert’s ISO 150404 form and thickness 4.76 mm ensure compatibility with standard turning holders when matching the insert shape, relief angle, tolerance class, clamping method, size and thickness. The measured geometry supports dimensional consistency across batch production and simplifies process planning. Integrated chip control and system compatibility for smooth operation Equipped with a double-sided chipbreaker arrangement and a cylindrical hole for secure fastening, this indexable insert is designed for reliable chip formation and evacuation. Selecting the appropriate chipbreaker style and grade according to workpiece stability and machining type optimises swarf control and reduces the risk of built-up edge. The complete system comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws for straightforward assembly and replacement. Cost-efficient handling and simple tool management The insert’s reversible design permits indexing to new cutting edges, reducing cost per edge and minimising tooling inventory turnover. As a member of the ISO turning insert family, it integrates into existing tool management routines and enables fast changeovers. For less experienced staff, CVD-coated refers to a thin, chemically deposited protective layer on the carbide substrate that increases resistance to abrasion; carbide denotes the hard substrate that sustains cutting loads. These characteristics make the component a practical option for production-focused workshops seeking stable process performance. For productive, reliable turning operations select the Tungaloy T9215 grade insert and contact Metav Werkzeuge for tailored application guidance and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6772214 SKU: 6772214-Tungaloy Manufacturer SKU: TUN6772214 Model series: ISO turning inserts Material: carbide Grade: T9215 Designation: DNMG150404 Facts Nose radius: 0.4 mm Geometry angle: 55° Relief angle: 0° Thickness: 4.76 mm Size: 15 mm Manufacturer article number: 6772214 Special features CVD coating Double-sided chipbreaker Rhombic insert shape Cylindrical hole ISO 150404 form Suitable for medium steel machining For continuous to slightly interrupted cuts Indexable insert, reversible edges FAQ What materials is this insert best suited for? The DNMG150404 T9215 insert from Tungaloy is optimised for medium steel machining, combining wear resistance and toughness for stable, productive cutting. Can the insert be used for both external and internal turning? Yes, the indexable insert is designed for external and internal turning when paired with the appropriate external holder or boring bar and correct clamping components. How does the 55° geometry affect cutting performance? The rhombic 55° geometry provides a favourable cutting direction for turning and profiling, helping to maintain dimensional accuracy and predictable surface finish across workpieces. What does double-sided mean for tool costs? The double-sided design allows the insert to be indexed to fresh edges, lowering cost per cutting edge and extending time between replacements for the Tungaloy insert. Is the insert compatible with standard ISO holders? Compatibility is determined by matching the insert form, relief angle, tolerance class, clamping method, size and thickness; the DNMG150404 follows ISO standards for straightforward integration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Combining a wear-resistant CVD-coated carbide grade, a precise 0.4 mm corner radius and ISO compatibility, this insert delivers consistent turning performance and predictable tool life. Order the DNMG150404 T9215 via Metav Werkzeuge or request consultation for matching holders and clamping solutions. DNMG150404 T9215 — Turning insert by Tungaloy, CVD-coated carbide, 55° rhomboid The DNMG150404 T9215 is an ISO-standard, rhomboidal indexable insert for external and internal turning, optimised for medium-steel machining and continuous to light interrupted cuts CVD-coated carbide for wear resistance 55° rhomboid form, ISO DNMG150404 0.4 mm corner radius for precise finishes Predictable productivity with a CVD-coated cutting grade The combination of a CVD-coated hardmetal substrate and the T9215 grade offers a balance of wear resistance and fracture toughness aimed at mid-range steel machining. This provides a stable removal rate under continuous and light interrupted cutting conditions, allowing for reliable cycle times and reduced tool changes. The indexable design supports repeatable geometry, which translates into more consistent part tolerances and fewer unplanned stoppages. Geometry engineered for dimensional accuracy and surface quality The rhomboidal 55° form and the 0.4 mm corner radius are designed to produce controlled cutting engagement and good surface finishes in common turning operations. A plate thickness of 4.76 mm and an insert size of 15 mm ensure sufficient body stiffness for typical lathe holders; compatibility with a chosen holder depends on form, clearance angle, tolerance class, fastening and thickness. Accurate geometry reduces vibration and helps achieve repeatable part quality. Secure clamping and effective chip control for process stability A cylindrical hole and a double-sided chipbreaker ensure consistent seating and reliable chip formation during machining. The chip control geometry reduces the risk of entanglement and supports stable cutting forces, which improves both tool life and surface consistency. This combination is particularly advantageous in production environments where short set-up times and repeatable results are priorities. Practical choice for production-oriented turning applications As an ISO-standard insert in the DNMG family, the DNMG150404 T9215 suits shops seeking an economical, high-throughput solution for medium steel workpieces. Selection of the T9215 grade supports long tool life and good process reliability; matching the insert to the correct holder and cutting parameters yields measurable productivity gains and lower per-part tooling cost. For best results, pair the insert with holders specified for DNMG geometry and verified clamping systems. Contact Metav Werkzeuge for tailored holder recommendations and stock availability for Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944687 Manufacturer SKU: TUN6944687 SKU: 6944687-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T9215 (CVD-coated) Designation: DNMG150404 Numbers / Core technical data Angle: 55° Corner radius: 0.4 mm Thickness: 4.76 mm Insert size: 15 mm Designs / Special features Rhomboidal insert form Cylindrical hole Double-sided chipbreaker CVD-coated carbide (T9215) ISO-standard turning insert Application: Turning FAQ What materials is this insert best suited for? The DNMG150404 T9215 is designed primarily for medium steel machining; the T9215 grade combines wear resistance and fracture toughness for productive turning of common steel alloys. Will this insert fit standard DNMG holders? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the DNMG150404 designation indicates the ISO geometry, but holder matching should be verified before use. Which machining conditions are recommended for this grade? The T9215 grade performs well in continuous to light interrupted cuts, offering stable wear behaviour and consistent tool life under typical production cutting parameters. How does the chip control perform with this insert? The double-sided chipbreaker promotes controlled chip formation and evacuation, contributing to stable cutting forces and improved surface finish during turning cycles. Is the insert reversible or single-use per edge? The DNMG150404 is double-sided with chipbreaker geometry on both cutting faces, allowing orientation changes to present a fresh cutting edge as permitted by the insert design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
High wear resistance and dependable edge security make this CVD‑coated carbide insert a strong choice for productive medium‑steel turning; its ISO‑compliant form and cylindrical‑hole fixing ensure straightforward integration into standard toolholders. Benefit from stable chip formation and simple indexing to keep machining throughput high — order the DNMG150404 T9215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150404 T9215 — Indexable turning insert (ISO, rhombic 55°) by Tungaloy The DNMG150404 T9215 is an ISO‑standard rhombic indexable insert designed for general turning; optimised for medium‑steel machining with a CVD‑coated carbide grade that balances wear resistance and fracture toughness CVD‑coated carbide for medium‑steel turning Double‑sided chipbreaker for stable chip control ISO DNMG rhombic form, 55° geometry Cylindrical hole and 0° clearance angle High productivity through engineered wear resistance The T9215 grade combines a CVD‑coated surface with a tough carbide substrate to deliver extended life under continuous and slightly interrupted cuts. This results in reduced tool changes and consistent component quality, improving overall process efficiency. The combination of wear resistance and edge integrity means machining cycles can be run with confidence, while the coating lowers adhesive wear and helps maintain cutting geometry over longer runtimes. Seamless integration with ISO toolholder systems As an ISO‑standard insert in DNMG form, the unit is compatible with conventional rhombic toolholders when matched for form, clearance angle, tolerance class, fastening and thickness. The insert’s cylindrical hole and standard dimensions simplify clamping and indexing, reducing set‑up time. Clear dimensional data and norm compliance support predictable assembly and repeatable set‑up, which is particularly valuable in series production and mixed‑batch manufacturing. Improved chip control and surface finish for turning operations The double‑sided chipbreaker geometry and rhombic 55° form promote controlled chip formation and evacuation, which helps protect the cutting edge and stabilise the cutting process. A corner radius of 0.4 mm provides a balance between edge strength and surface finish, making the insert suitable for finishing and medium stock removal. The result is fewer interruptions for chip clearing and a measurable improvement in final surface quality on turned parts. Practical benefits for workshop efficiency Selecting this insert supports predictable tool life and easier tooling logistics: the reversible design doubles usable edges and the standardised format simplifies inventory management. The grade’s suitability for medium‑steel applications means fewer tool variants are required across common jobs, supporting a lean tooling strategy and faster order fulfilment when replacements are needed. For tailored advice on integrating Tungaloy’s DNMG 150404 T9215 inserts into existing turning centres, contact Metav Werkzeuge for application support and holder compatibility checks. Technical data Article number: 6944573 Manufacturer SKU: TUN6944573 SKU: 6944573-Tungaloy Designation: DNMG150404 T9215 Product type: ISO indexable turning insert Core dimensions Plate form: rhombic (55°) Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Hole: with cylindrical hole Materials & features Material: CVD‑coated carbide (grade T9215) Chipbreaker: double‑sided Application: turning; medium steel System: ISO‑standard insert; compatibility by form, clearance angle, tolerance, fastening, size, thickness FAQ Is this insert suitable for interrupted cuts? The DNMG150404 T9215 indexable insert is intended primarily for continuous to light interrupted cuts; its grade combines toughness and wear resistance to handle slight interruptions without premature edge failure. Which toolholders are compatible with this DNMG insert? Compatibility relies on ISO DNMG‑style holders that match the insert’s rhombic 55° form, thickness (4.76 mm), hole type (cylindrical) and tolerance class; refer to the holder specification and the SKU 6944573‑Tungaloy for precise matching. What materials can be machined effectively with this grade? The T9215 grade is a first choice for medium steel machining, offering a balance between abrasion resistance and fracture toughness for productive turning operations. Is the insert reversible and how many cutting edges are available? The DNMG150404 T9215 is double‑sided with a chipbreaker on both sides, allowing indexing to use multiple cutting edges and thus extending productive lifespan per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a compact rhombic 55° geometry for consistent productivity and reliable wear resistance. The DNMG150404 T9215 insert delivers secure clamping with its cylindrical hole and a precise 0.4 mm corner radius, enabling stable external and internal turning cycles; order directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG 150404 T9215 – ISO turning insert for turning by Tungaloy A DNMG150404 T9215 indexable insert designed for medium steel external and internal turning, combining high wear resistance with fracture toughness for continuous to slightly interrupted cuts CVD-coated carbide T9215 for steel machining Rhombic 55° geometry for versatile turning 0.4 mm corner radius for precise profiles Double-sided with cylindrical hole for secure clamping Consistent tool life through optimised coating and grade The combination of a CVD coating with a T9215 grade carbide substrate provides a balanced mix of wear resistance and fracture toughness, which supports longer tool life in medium steel turning. For machining operations that alternate between continuous and slightly interrupted cuts, the coating reduces flank wear and the substrate maintains edge stability, resulting in fewer indexings and more productive machining cycles. This technical composition translates into measurable process reliability and lower tooling consumption over time. Geometry and edge preparation that improve part quality The rhombic 55° geometry and 0.4 mm corner radius enable controlled chip formation and precise profile reproduction on the workpiece. The 55° lead angle reduces cutting force peaks while preserving surface finish; the small corner radius is suited to fine turning and profile work where dimensional accuracy matters. These geometric choices reduce vibration risk and contribute to a repeatable surface quality, making the insert suitable for components with tight tolerances. Secure clamping and compatibility with ISO holders Featuring a cylindrical hole and double-sided design, the insert offers reliable seating and economical indexability. The ISO designation ensures compatibility with standard holders when form, clearance angle, tolerance class, screw fastening, size and thickness are matched. Use with a correctly specified external holder or boring bar ensures clamping stability, reduced run-out and uniform cutting conditions, which together minimise the likelihood of unexpected edge failure. Practical advantages for workshop efficiency The insert is engineered for efficient tool management: being double-sided halves part costs per usable edge, while the T9215 composition supports high productivity in batch and single-piece flows alike. Reduced flank wear and stable chip control lower rework rates and help maintain cycle time targets. For workshops aiming to balance throughput and component quality, this grade supports predictable tool-change intervals and straightforward inventory handling. Choosing the right machining parameters and insert pairing Selecting suitable feeds, speeds and a matching chipbreaker is key to exploiting the insert’s properties. The T9215 grade performs best in medium steels; pairing with a compatible chipbreaker and a stable toolholder yields optimised chip evacuation and surface finish. When application specifics are unclear, consult tooling data sheets or the technical team to determine cutting parameters that match material, operation type and machine capability. Contact Metav Werkzeuge today for tailored recommendations on the Tungaloy DNMG150404 T9215 insert and guidance on holder compatibility, cut data and stock availability – info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6796030 Manufacturer SKU: TUN6796030 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Lead angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Inscribed circle/size: 15 mm Special features ISO designation: DNMG150404 Coating / grade: CVD-coated carbide, T9215 Plate form: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Application: turning FAQ Which materials is this insert best suited for? The DNMG150404 T9215 insert is optimised for medium steel machining; the CVD-coated carbide composition offers a balance of wear resistance and toughness tailored to such materials. Can the insert handle interrupted cuts? Yes, the T9215 grade combines fracture resistance with wear performance, making the insert suitable for continuous to slightly interrupted cutting conditions. How does the rhombic geometry affect cutting? The 55° rhombic geometry reduces cutting forces and improves access to external and internal contours, supporting stable cutting and consistent surface finish when used with the correct holder. Is the DNMG150404 compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; when matched, the insert seats securely in standard ISO external or boring holders. What are the inventory and clamping advantages of this design? Being double-sided with a cylindrical hole, the insert provides economical indexing and secure clamping, reducing per-edge cost and supporting reliable seat engagement in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture toughness and ISO compatibility for reliable turning performance; the CVD‑coated carbide grade T9215 supports productive, continuous to light interrupted cutting. Order the DNMG150404 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150404 T9215 Tungaloy turning insert — CVD‑coated carbide, 55° rhombic geometry A DNMG150404 T9215 turning insert designed for ISO‑standard external and internal turning applications, optimised for medium steel machining. CVD‑coated carbide grade T9215 ISO‑standard rhombic plate, 55° geometry Double‑sided chipbreaker for stable chips 0.4 mm corner radius for fine profiles High productivity through material and coating The combination of a CVD‑coated surface and a carbide substrate in grade T9215 provides an effective balance of wear resistance and fracture toughness, making it well suited for stable, economical turning in medium steel. The coating reduces flank and crater wear at higher cutting speeds, while the substrate absorbs shock during light interruptions. This pairing enables longer tool life and more consistent component quality, supporting higher spindle speeds and uninterrupted production cycles. The result is measurable productivity gains and fewer tool changes on the shop floor. ISO compliance that simplifies tooling logistics As an ISO‑standard rhombic plate, the insert fits a broad range of established holders when the form, clearance angle, tolerance class, fastening and plate thickness match. The 55° geometry offers a versatile approach angle for both external and internal operations, while the 0° relief and plate thickness of 4.76 mm add stability in demanding setups. Standardised dimensions reduce inventory complexity and make it easier to swap inserts between machines, cutting downtime and easing tool management across multiple turning centres. Chip formation and geometry for reliable surface results The double‑sided chipbreaker is tuned to produce short, controllable chips in continuous to light interrupted cuts, reducing risk of built‑up edge and improving surface finish. The rhombic shape with a 0.4 mm corner radius allows delicate profiling and helps maintain dimensional accuracy on finishing passes. The cylindrical hole provides secure mounting and repeatable clamping, contributing to stable cutting conditions and predictable tool behaviour under varying feed rates. Practical application advice and economic benefits Chosen primarily for medium steel, the insert supports a productive balance between cutting parameters and tool life—ideal for serial production and batch work. Selecting the correct chipbreaker and matching the grade T9215 to the workpiece material and cutting conditions will pay off through reduced tool consumption and improved cycle times. For assistance with optimal cutting data, holder selection or to confirm compatibility with a specific machine, Metav Werkzeuge offers technical consultation and practical recommendations to help integrate the insert into existing tool systems. For tailored tooling advice or to place an order for the Tungaloy DNMG150404 T9215 turning insert, contact Metav Werkzeuge for expert guidance and prompt supply via Metav Werkzeuge. Technical data Article number: 6774113 Manufacturer SKU: TUN6774113 SKU: 6774113-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150404 Core specifications Geometry angle: 55° Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Features and materials Coating: CVD Grade: T9215 Substrate: carbide Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: Turning (external and internal) FAQ What materials is this insert best suited for? The Tungaloy DNMG150404 T9215 insert is optimised for medium steel; the T9215 grade balances wear resistance and fracture toughness for continuous to light interrupted turning. Will the DNMG150404 fit my existing holder? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, plate size and thickness; the DNMG150404 conforms to ISO dimensions, so matching these parameters will ensure correct fit. What does the T9215 designation indicate? T9215 is a CVD‑coated carbide grade developed for high productivity in medium steel, offering good wear resistance and resistance to chipping under standard turning loads. Is the insert suitable for internal turning and profiling? Yes; the 55° rhombic geometry and 0.4 mm corner radius make the insert suitable for both external and internal turning as well as fine profiling when mounted in a compatible holder. How does chip control work with this insert? Chip control is provided by the double‑sided chipbreaker, which promotes short, stable chips in continuous to light interrupted cuts, improving surface quality and machine cleanliness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 CVD-coated carbide and the stabilising 0.4 mm corner radius for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. DNMG150404 T9225 – ISO rhombic turning insert, CVD-coated carbide, 55° by Tungaloy A DNMG150404 T9225 indexable insert designed for external and internal turning across a wide range of steel machining tasks, offering a balanced combination of toughness and wear resistance. CVD-coated carbide for robust steel machining Universal T9225 grade for medium to heavy cuts Rhombic DNMG geometry with 55° cutting angle Double-sided chipbreaker and central cylindrical hole Consistent performance for medium to heavy steel turning The CVD-coated carbide substrate and universal T9225 grade provide a stable cutting edge for variable machining conditions, especially where interrupted cuts or fluctuating engagement depths occur. This combination favours long tool life under demanding conditions while maintaining cutting security; the result is fewer insert changes and a smoother production flow. The double-sided chipbreaker contributes to improved chip control and reduces the risk of built-up edge, which improves surface finish and repeatability in serial turning operations. ISO compatibility that speeds up setup and reduces uncertainty Designed to the ISO designation 150404, this rhombic format simplifies toolholder selection and bench planning. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; specifying the DNMG family ensures a predictable fit in appropriately rated external holders or boring bars. For shops standardising on ISO tooling, the predictable geometry reduces set-up time and minimises the risk of incorrect clamping—both practical savings in production environments. Geometry engineered for strength and edge life A 55° cutting geometry combined with a 0.4 mm corner radius and a plate thickness of 4.76 mm balances edge robustness with acceptable cutting forces. The rhombic shape and the central cylindrical hole support secure clamping, enabling consistent repeatability and the option of flipping the insert for continued use. These geometric choices help to distribute cutting stresses, increase wear resistance and maintain dimensional stability when turning shafts, shoulders or bore profiles. Application guidance and selection tips for reliable results Suitable primarily for steel machining in medium to heavy operations, the insert performs well when paired with a matching chipbreaker and an appropriate coolant strategy. For interrupted or unstable cuts, select a more tenacious grade and a chipbreaker designed for heavy chip loads; for finishing, combine the insert with a finer clearance and optimised cutting parameters. The ISO-format insert integrates into standard tool systems; ensure holder compatibility by confirming clearance angles and tolerance classes before mounting to secure consistent performance. Contact Metav Werkzeuge for tailored technical advice on Tungaloy turning inserts and application-specific recommendations; reach our team at info@metav-werkzeuge.com or by phone for immediate support Technical data Article number: 6780870 Manufacturer SKU: TUN6780870 Our SKU: 6780870-Tungaloy Model series: ISO turning indexable inserts Name: DNMG150404 T9225 Tungaloy insert Dimensions & core data ISO code: 150404 Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 55° Hole: cylindrical (with hole) Materials & special features Material: carbide Coating: CVD-coated Grade: T9225, universal for medium/heavy steel machining Shape: rhombic (DNMG) Chipbreaker: double-sided Compatibility: ISO-standard insert; holder fit depends on form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? This insert is designed for steel machining; the T9225 CVD-coated carbide grade is intended for medium to heavy turning work in steel. Can the insert be used on internal and external turning operations? Yes, the DNMG geometry and the rhombic format support both external and internal turning applications when mounted in a suitable holder. How does the 0.4 mm corner radius affect cutting? A 0.4 mm radius increases edge strength and improves resistance to chipping, making it suitable for heavier cuts while maintaining reasonable surface quality. Is the insert reversible or double-sided? The insert features a double-sided chipbreaker and a central cylindrical hole, allowing it to be indexed for extended use and stable clamping. Which item number should be referenced when ordering? Reference article number 6780870 or Manufacturer SKU TUN6780870 when specifying this Tungaloy DNMG150404 T9225 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.4 mm corner radius for versatile turning and proven compatibility with ISO holders for steady production results; order directly via Metav Werkzeuge or consult our technical advisors for application support. DNMG 150404 T9225 indexable insert for turning – Tungaloy, CVD-coated carbide, 55° geometry DNMG 150404 T9225 is a rhombic indexable insert designed for general turning applications, offering a robust CVD-coated carbide grade for medium to heavy steel machining. CVD-coated carbide grade T9225 Robust for medium to heavy steel machining Double-sided insert, 0.4 mm corner radius ISO rhombic DNMG 15 with 55° geometry Consistent cutting performance for mixed and interrupted cuts The CVD-coated carbide substrate of this insert delivers stable wear resistance and a reliable cutting edge under varying engagement conditions. Designed as a robust universal grade, the T9225 coating balances toughness and hardness, which reduces the risk of premature edge chipping during intermittent cuts or when machining parts with variable rigidity. For production environments that demand steady tool life across batches, this insert provides repeatable results and predictable tool-change intervals. Practical compatibility and fixture considerations for easy integration Manufactured to ISO dimensions, the insert’s rhombic shape and cylindrical hole ensure secure seating in a wide range of standard external holders and boring bars. The combination of 55° geometry and a 0° clearance angle produces a balanced cutting action that suits both finishing and mid-depth roughing passes. When selecting a holder, match form, relief angle and tolerance class to ensure correct clamping and optimum cutting stability; the insert integrates into standard tool systems with minimal setup time. Benefits from the double-sided design and defined corner radius A double-sided configuration doubles the available cutting edges, improving economy per insert and reducing tool-change frequency. The defined 0.4 mm corner radius enhances edge strength while still permitting precise turning on shoulders and profiles, offering a compromise between edge durability and surface finish. For shops aiming to streamline inventory, this insert’s versatility allows one grade to cover a range of turning tasks in steel, making process planning and tool procurement more efficient. For reliable medium-to-heavy steel turning choose Tungaloy’s CVD-coated T9225 insert and contact Metav Werkzeuge for tailored application advice or to arrange supply through their technical team. Technical data Article number: 6781253 SKU: 6781253-Tungaloy Manufacturer SKU: TUN6781253 Model series: ISO-Drehwendeschneidplatten Description: DNMG150404 T9225 Tungaloy indexable insert Facts Corner radius: 0.4 mm Geometry angle: 55° Clearance angle: 0° Thickness: 4.76 mm Size: 15 mm Special features Material: carbide Coating: CVD-coated (T9225) Application: turning Shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided ISO code: 150404 FAQ What materials is this insert suitable for? The DNMG 150404 T9225 indexable insert is formulated for medium to heavy steel machining and performs well where increased toughness is required. How does the T9225 grade affect tool life? The T9225 CVD coating increases wear resistance while maintaining edge toughness, which extends tool life under mixed or slightly interrupted cutting conditions. Can this insert be used in standard ISO DNMG holders? Yes, the ISO DNMG 150404 form and cylindrical hole make it compatible with standard DNMG external holders and suitable boring bars when clamped with the correct tolerance class. What advantages does the 0.4 mm corner radius provide? A 0.4 mm corner radius reinforces the cutting edge to resist chipping while still allowing acceptable surface finish and accurate profile turning. Is the insert reversible and economical for production runs? The double-sided design provides multiple effective cutting edges, improving economical use per insert in production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated T9225 grade and a 0.4 mm corner radius for reliable, heavy‑duty turning performance; the ISO form and double‑sided chipbreaker ensure stable chip control and predictable tool life. Order the DNMG150404 insert directly via Metav Werkzeuge or consult our specialists for matching holder and process parameters. DNMG 150404 T9225 indexable insert for turning – Tungaloy A DNMG150404 T9225 indexable insert designed for medium to heavy steel turning, supplied in an ISO‑standard rhombic form for straightforward integration into ISO holders DNMG 150404 geometry, ISO‑standard rhombic insert CVD‑coated carbide grade T9225 for steel machining 0.4 mm corner radius and 55° wedge angle Cylindrical hole and double-sided chipbreaker High‑performance grade for demanding steel turning The DNMG150404 insert is produced in a CVD‑coated cemented carbide grade T9225, engineered to combine toughness with wear resistance for interrupted and variable‑engagement cuts. The robust grade is suitable for medium to heavy machining of steel where consistent tool life and secure edge behaviour are priorities. Thanks to the 0.4 mm corner radius, edge strength is increased, reducing the risk of chipping under changing load, and enabling reliable dimension control on turned components. ISO compatibility and secure mechanical clamping Supplied in an ISO standard rhombic form, this indexable insert integrates easily with matching external turning holders or boring bars; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole and a double‑sided chipbreaker, allowing reversible use and simple indexing. The combination of geometry and hole style gives predictable clamping and repeatability when the correct holder and screw are selected, supporting stable setups and minimised downtime. Process stability and efficient chip control The combination of the double‑sided chipbreaker and grade design promotes stable chip formation, which reduces heat concentration and improves surface finish with fewer interruptions. The insert’s 55° wedge angle and 0° clearance result in a balanced cutting edge suitable for general turning tasks, delivering consistent cutting forces and good surface integrity. For production environments seeking to raise throughput, the predictable wear behaviour of this component helps to plan insert changes and maintain cycle times. Practical selection and operational guidance When choosing an insert for a specific job, match the insert grade and chipbreaker to the workpiece material and machining conditions rather than relying solely on geometry. The T9225 grade performs well across a broad range of steels under variable engagement; pair the insert with an appropriately rigid holder and adjust feed and speed to the component’s stability. If component tolerance, surface finish or interrupted cutting present special challenges, consult technical documentation or request tailored recommendations to confirm the optimum combination of insert geometry and holder. For technical matching, availability and to secure DNMG 150404 T9225 inserts from Tungaloy, contact Metav Werkzeuge for fast, application‑oriented advice and ordering Technical Data Article number: 6780721 Manufacturer SKU: TUN6780721 Product label: DNMG150404 T9225 Tungaloy‑indexable insert Material: cemented carbide Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Wedge angle: 55° Clearance angle: 0° Special features Grade: T9225 (CVD‑coated) Double‑sided chipbreaker Rhombic insert form (DNMG) Cylindrical hole for secure clamping Designed for turning applications Reversible indexable design FAQ What applications suit this insert best? The DNMG150404 T9225 indexable insert from Tungaloy is intended for external and internal turning of steel in medium to heavy cutting conditions, with the grade optimised for interrupted or varying engagements. How does the T9225 grade affect tool life? T9225, a CVD‑coated cemented carbide, provides a balance of wear resistance and toughness; in many steel turning operations the Tungaloy T9225 grade yields longer, more predictable tool life compared with uncoated grades. Is the insert reversible and how many cutting edges are available? The DNMG150404 insert is double‑sided and reversible, offering two usable cutting edges per side for efficient indexation and cost‑effective use. Which holder features are required for correct compatibility? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; ensure the external turning holder matches the ISO rhombic DNMG form and accommodates a 4.76 mm thick insert with a cylindrical hole. What cutting geometry benefits does the 0.4 mm radius provide? A 0.4 mm corner radius increases edge strength, improves chip evacuation in heavier cuts and helps maintain dimensional stability on turned parts under fluctuating load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade T9225 and a 55° rhombic geometry to achieve reliable chip control and extended tool life in medium-to-heavy turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for setup and cutting-data recommendations. DNMG150404 T9225 turning insert — Tungaloy, ISO turning insert for robust steel machining DNMG150404 T9225 is an ISO‑format rhombic turning insert optimised for external and internal turning in demanding steel applications. CVD-coated carbide grade T9225 Robust for medium-to-heavy steel turning 55° rhombic form with cylindrical hole Double-sided chipbreaker, 0.4 mm radius Engineered for process reliability and consistent chip formation The CVD-coated carbide construction of this insert combines a wear‑resistant ceramic layer with a tough substrate to balance life and edge strength. As a universal grade T9225, the cutting material is designed for medium‑to‑heavy steel machining where variable cutting conditions or lightly interrupted cuts demand additional toughness. The integrated double-sided chipbreaker promotes controlled chip breaking across a range of feeds, reducing the risk of snarled chips and improving cycle reliability. Compatibility with appropriate toolholders is determined by form, 0° clearance angle, tolerance class, attachment method, size and thickness, ensuring predictable performance when paired with a correctly specified external holder or boring bar. Geometry and dimensions that support productivity and surface quality The rhombic 55° form delivers versatile approach angles for both facing and turning tasks while the 0.4 mm corner radius helps sustain edge strength under higher loads and contributes to a stable surface finish. The insert’s 4.76 mm thickness and the presence of a cylindrical hole for secure fastening increase clamping stability, which in turn reduces vibration and extends tool life. These geometry choices translate directly into fewer interruptions on the shop floor and more consistent part tolerances, making the component suitable for production environments where repeatability and throughput are priorities. Practical system considerations and economical operation System setup comprises the ISO turn insert, a matching outer holder or boring bar, a clamping pad/kit and spare screws; correct selection prevents premature wear and ensures safe engagement. The grade’s balance of wear resistance and toughness supports longer intervals between insert changes, improving cost per part in serial production. Backing from Tungaloy engineering provides confidence in material behaviour under varied cutting conditions, and documented compatibility with standard ISO holders simplifies procurement and inventory management. Request cutting parameters or application advice from Metav Werkzeuge to match this Tungaloy insert to the specific turning application and workpiece material Technical Data Article number: 6950962 Manufacturer SKU: TUN6950962 Brand: Tungaloy ISO designation: DNMG150404 Core specifications Shape angle: 55° Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Size: 15 mm Materials & special features Carbide substrate with CVD coating Grade: T9225 — robust universal grade for steel Rhombic 55° geometry, cylindrical hole Double-sided chipbreaker Application: external and internal turning Compatible holder determined by form, tolerance, attachment, size and thickness FAQ What materials is this insert suitable for? The DNMG150404 T9225 insert is formulated as a universal grade for medium‑to‑heavy steel machining and performs well under variable cutting conditions. Can the insert be used for interrupted cuts? Yes — the toughness of the T9225 grade and the 0.4 mm corner radius make the insert suitable for lightly interrupted cuts typical in turning operations. What does the 55° rhombic form provide? A 55° rhombic geometry offers versatile cutting approach angles for facing and turning, improving accessibility and helping achieve consistent surface finish. How is the insert fastened in the holder? The insert features a cylindrical hole for secure clamping; a matching outer holder or boring bar with the correct clamping kit and screws is required for safe operation. Which SKU identifies this product for ordering? Order using the article number 6950962 or manufacturer SKU TUN6950962 to ensure the correct DNMG150404 T9225 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide T9225 combined with ISO DNMG 150404 geometry and a 0.4 mm corner radius ensures dependable mid-to-heavy Stahl turning with good chip control and extended tool life. Benefit from the double-sided, indexable design for economical tool usage and consistent component quality. Order directly via Metav Werkzeuge or consult our specialists for selection and stocking advice. DNMG150404 T9225 — Indexable Turning Insert for Turning (Tungaloy) The DNMG150404 T9225 is an ISO‑standard indexable turning insert designed for external and internal turning operations, offering a robust CVD‑coated carbide grade for variable engagement and interrupted cuts. CVD-coated carbide grade T9225 ISO DNMG 150404 geometry 0.4 mm corner radius for versatility Double-sided insert with cylindrical hole Consistent cutting performance for medium-to-heavy Stahl turning The CVD‑coated T9225 grade delivers a balanced combination of wear resistance and toughness, making it suitable for medium-to-heavy Stahl machining where variable cutting conditions or light interruptions occur. The rhombic plate form with a 55° approach angle provides predictable cutting forces and contributes to stable profiles on shafts and faces. The coating reduces flank wear and heat transfer to the substrate, which translates into longer intervals between indexings and fewer rejected parts — a measurable contribution to process reliability in production environments. Reduced setup time and precise holder compatibility Compatibility with clamping systems and boring bars is determined by the insert geometry, relief angle, tolerance class, fastening style, overall size and thickness. The indexable plate features a cylindrical locating hole and is double-sided, enabling fast indexing and simple replacement without full tool regrind. Using a correctly matched holder and clamping kit ensures secure seating, consistent rake orientation and reproducible cutting geometry, which together reduce setup time and increase first‑part quality in batch production. Cost-efficiency and predictable tool life in series production A double-sided, indexable design means two cutting edges per insert, delivering immediate cost advantages compared with single‑edge tooling. The CVD coating and carbide substrate of this grade offer enhanced tool life under heavy engagement, lowering per‑component tooling costs. Additionally, the built-in chipbreaker pattern supports controlled chip formation, simplifying coolant management and surface finish control. For process planners, the result is a reproducible cycle time and fewer unscheduled tool changes — factors that directly improve overall equipment effectiveness. For technical selection or to secure stock of Tungaloy grade T9225 inserts, contact Metav Werkzeuge for expert advice and immediate availability — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780904 Manufacturer SKU: TUN6780904 SKU: 6780904-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Relief angle: 0° Features / Materials Material: carbide Grade: T9225 (CVD‑coated carbide) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning ISO designation: DNMG150404 FAQ What materials is this insert best suited for? The DNMG150404 T9225 insert is a CVD‑coated carbide grade optimised for medium to heavy Stahl turning, particularly where intermittent cuts or varying engagement demand increased toughness. How is the insert retained in the holder? Retention relies on the rhombic geometry and the cylindrical locating hole; matching holder pockets, clamping sets and screws provide accurate seating and repeatable cutting orientation for the DNMG150404 insert. Can the insert be indexed to present a fresh cutting edge? Yes, the insert is double‑sided and indexable, allowing rotation to a second edge to extend service life and reduce tooling costs; Tungaloy's DNMG configuration supports quick re‑indexing. Which chipbreaker variant does this insert use? This item is supplied with a double‑sided chipbreaker suitable for general turning tasks; chip control supports stable cutting and improves surface finish consistency when paired with appropriate feeds and speeds. Is the insert suitable for internal turning or boring operations? The geometry and 55° approach angle make the insert applicable to both external and internal turning; selection of a compatible boring bar or holder is essential to ensure correct tool projection and rigidity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust material, ISO compatibility and a proven chipbreaking geometry for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for application advice. DNMG 150404 T9225 — ISO turning insert for turning, 55° rhombic geometry, Tungaloy A DNMG 150404 T9225 indexable insert engineered for medium to heavy steel turning, offering a robust CVD-coated carbide grade and a rhombic 55° form for versatile external and internal machining. CVD-coated carbide T9225 55° rhombic insert geometry Double-sided chipbreaker Cylindrical hole for secure clamping Consistent performance in medium to heavy steel turning The combination of a CVD-coated carbide substrate and the T9225 universal grade delivers stable cutting under varying engagement conditions. Designed for robustness, this grade promotes stable chip formation and extended tool life, reducing unplanned interruptions in the machining process. The enhanced toughness of the grade makes it particularly suited to interrupted cuts and applications where entry and exit conditions change, so the production rhythm is maintained and component quality remains consistent. Simple integration with ISO holders for faster setup Compatibility is governed by form, clearance, tolerance class, fastening, size and thickness, and this insert follows the ISO conventions for reliable interchangeability. The 55° rhombic geometry and the 15 mm inscribed circle suit many standard toolholders, while the 4.76 mm thickness and the cylindrical hole ensure secure clamping and accurate seating. The ISO-conformant design reduces setup time and simplifies tool inventory management, accelerating changeover and maintaining repeatable process settings. Better process stability and lower inventory costs The double-sided chipbreaker allows two indexed cutting edges per side, which extends usable life and lowers per-edge cost. The neutral 0° clearance angle supports consistent workpiece surface quality when machining steels and helps maintain machining parameters across batches. Fewer insert changes and predictable edge behaviour contribute to improved process stability, helping production planners achieve higher uptime and a more favourable cost-per-part ratio. Practical applications and recommended use cases This insert is primarily aimed at external and internal turning of steel components where medium to heavy cuts are required. The grade is effective for interrupted cuts and jobs with variable engagement, while the rhombic shape provides access to shoulder and facing operations. Select the appropriate chipbreaker and holder stability to match the workpiece and cutting conditions; for less rigid setups, the robustness of this solution helps avoid edge failure and reduces scrap rates. Contact Metav Werkzeuge for tailored advice on Tungaloy DNMG 150404 T9225 selection and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering information Technical Data Article number: 6944574 SKU: 6944574-Tungaloy Manufacturer SKU: TUN6944574 Model series: ISO turning indexable inserts Product designation: DNMG150404 T9225 Material: carbide Core data Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 55° Clearance angle: 0° Design & special features Rhombic insert form Double-sided chipbreaker With hole — cylindrical hole style CVD-coated carbide grade T9225 Suitable for medium to heavy steel turning Compatible with ISO-standard holders; designed for interrupted cuts FAQ What materials is this insert suitable for? The DNMG 150404 T9225 insert is formulated for steel machining, particularly medium to heavy steel; the T9225 grade offers toughness for variable engagement and interrupted cuts. Can the insert be used for both external and internal turning? Yes, the rhombic geometry and 55° lead angle make the insert suitable for both external and internal turning operations when mounted in the appropriate ISO toolholder. How does the T9225 grade affect tool life and chip control? The T9225 CVD-coated carbide provides a balance of wear resistance and toughness, promoting stable chip formation and extended edge life under changing cutting conditions. Which holder features ensure correct compatibility? Compatibility depends on form, clearance, tolerance class, fastening and size; a matching ISO DNMG holder with proper clamping for a cylindrical hole and a stable toolpost is recommended. What are the key dimensions to check before ordering? Verify the inscribed circle (15 mm), thickness (4.76 mm) and corner radius (0.4 mm) to ensure the DNMG150404 insert fits the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com