DNMG 150404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, ISO compatibility and a compact 0.4 mm corner radius for consistent turning performance; order the insert directly via Metav Werkzeuge or consult the team for application-specific selection. DNMG 150404 GH330 Turning Insert — ISO DNMG, 0.4 mm radius · Tungaloy The DNMG150404 GH330 Tungaloy turning insert is an ISO-standard rhombic, cemented carbide indexable insert designed for external and internal turning applications where wear resistance and cutting-edge stability are required ISO DNMG150404 rhombic insert GH330 carbide grade for wear resistance 0.4 mm corner radius Double-sided chipbreaker design Cylindrical hole for secure clamping Productivity gains through a wear‑resistant carbide grade The combination of the GH330 Tungaloy grade with a compact rhombic geometry delivers measurable productivity improvements in turning operations. The cemented carbide substrate and GH330 formulation are geared towards a balance of wear resistance and edge stability, which reduces tool changes and keeps cycle times lower. Where process consistency is essential, this insert supports longer uninterrupted runs and contributes to overall cost efficiency by maintaining surface quality over extended tool life. Secure clamping and straightforward holder compatibility Designed as an ISO‑standard indexable insert, the ISO DNMG150404 form ensures predictable compatibility with matching DIN/ISO DNMG holders and boring bars. The cylindrical hole and specified plate thickness of 4.76 mm provide reliable mechanical clamping and repeatable seating in the pocket, reducing setup variation. For high‑stability turning, pairing the insert with the correct holder geometry, shim and torque for the replacement screw is essential to exploit its full performance potential. Geometry tuned for surface integrity and reliable chip control The rhombic DNMG shape combined with a 0.4 mm corner radius offers a compromise between robust cut‑edge strength and the ability to produce clean finishes on workpieces. The double-sided chipbreaker geometry supports effective chip control for many turning conditions when the chipbreaker is selected to suit the material and cutting mode. The specified 0° relief characteristic influences cut engagement and should be considered when setting feeds and depths to achieve the desired surface finish and dimensional accuracy. System perspective and application guidance for turning This insert forms part of a complete system: ISO indexable insert, suitable external holder or boring bar, a matching underlay/clamping set and the corresponding replacement screw. Application is primarily for turning, including both external and internal operations; the recommended practice is to choose the appropriate chipbreaker and grade based on the workpiece material, process stability and machining strategy. The DNMG150404 GH330 Tungaloy turning insert is therefore a practical choice where repeatable performance and consistent results are required. Contact Metav Werkzeuge today for availability and tailored advice on using Tungaloy GH330 inserts in your turning operations — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6803317 Manufacturer SKU: TUN6803317 SKU: 6803317-Tungaloy Designation: DNMG150404 Brand: Tungaloy Model series: ISO indexable turning inserts Material: cemented carbide Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 55° ISO code: 150404 Special features Grade: GH330 (Tungaloy) Chipbreaker: double-sided Hole: cylindrical hole Shape: rhombic (DNMG) Intended application: turning (external and internal) System components: matching holder or boring bar, underlay/clamping set, replacement screws FAQ What is the primary application for this insert? The DNMG150404 GH330 Tungaloy turning insert is intended for external and internal turning; select the chipbreaker and holder according to the workpiece and machining strategy. How does the GH330 grade affect performance? GH330 offers a balance of wear resistance and edge stability; the GH330 formulation is designed to extend useful cutting life while maintaining surface quality under typical turning conditions. Is this insert compatible with standard DNMG holders? Yes — the ISO DNMG150404 form and the cylindrical hole permit secure seating in standard DNMG holders and boring bars when matched for form, clearance angle and clamping arrangement. Which geometry features support chip control? The double-sided chipbreaker and rhombic geometry promote reliable chip formation; the correct selection of chipbreaker style and operating parameters is crucial to achieve optimal chip control. What should be considered when choosing feeds and speeds? Feeds and speeds should be set taking into account the GH330 grade, the corner radius of 0.4 mm and the chosen chipbreaker; process stability and workpiece material must guide parameter selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected in the supplied product information: the material is specified both as cemented carbide and as a coated cermet (GT9530). These two designations describe different substrate and coating systems and are mutually inconsistent for a definitive technical description. Generation of a reliable product description is not possible until the material system is clarified—please confirm whether the item is a cemented carbide insert, a cermet insert, or a carbide substrate carrying a cermet coating, and provide any additional relevant details such as the intended grade and coating specification. Once the correct material classification is supplied, a complete, standards-compliant product text can be prepared.
DNMG 150404 GT9530 Wendeplatten - Tungaloy
Reliable finishing and extended tool life follow from the combination of the GT9530 coated cermet and the rhombic DNMG150404 geometry with a 0.4 mm corner radius. Designed for stable external and internal turning operations on steel, this ISO insert delivers consistent surface quality and predictable wear behaviour. Order the insert directly via Metav Werkzeuge or ask the consultants for compatibility and holder advice. DNMG150404 GT9530 ISO turning insert for turning applications, Tungaloy, 55° The DNMG150404 GT9530 is a coated cermet ISO turning insert engineered for finishing and light universal turning of steel under stable machining conditions. Coated cermet GT9530 for longer tool life ISO DNMG geometry for external and internal turning 55° rhombic form with 0° clearance angle High-precision finishing through cermet technology The coated cermet GT9530 grade combines a wear-resistant surface with fine, stable chip formation to produce improved surface finish and extended edge life compared with conventional grades. In finishing and light general turning of steel, the microstructure of the cermet reduces built-up edge and supports lower cutting forces at moderate feeds, which helps to maintain dimensional accuracy. The rhombic DNMG geometry with a 55° approach angle and 0° clearance angle is optimised for both external and internal turning where radial engagement and rigidity are key. The result is fewer part rework cycles and a more predictable production output. Compatibility and economical indexing for production workflows As an ISO turning insert, compatibility with the holder is governed by form, free rake angle, tolerance class, fastening and thickness — the system consists of the insert, a suitable external holder or boring bar, a seat or clamp set, and replacement screws. The double-sided chipbreaker and two-sided cutting capability allow economical indexing, effectively doubling usable edges and reducing tooling cost per part. The insert’s dimensions — including the 0.4 mm corner radius and 4.76 mm plate thickness — support stable engagement in well-supported setups, while the cylindrical hole simplifies secure fixing in standard clamps. Material application and practical selection advice This grade is optimised for steel machining where a combination of good surface quality and longer tool life is required under stable cutting conditions. For best results, select a chipbreaker and insert grade matched to the workpiece alloy and the planned cutting parameters: the GT9530 is a wear-resistant finishing-to-light-universal grade suited to steels rather than highly interrupted cuts or unsteady setups. The 15 mm inscribed size and modest corner radius favour fine finishing passes; larger radii or more robust grades are recommended for roughing. If holder compatibility or geometry choice is unclear, the technical team can advise on the correct clamp and screw combinations to preserve repeatability and surface integrity. For consistent finishing performance with Tungaloy’s GT9530 inserts, contact Metav Werkzeuge to confirm holder compatibility and secure supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998081 SKU: 6998081-Tungaloy Manufacturer SKU: TUN6998081 Facts Geometry: DNMG 55° rhombic Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 15 mm Clearance angle: 0° Special features Coating/grade: GT9530 coated cermet Material: carbide Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal), finishing to light universal Model series: ISO turning inserts FAQ What materials is this insert intended for? The GT9530 grade is intended primarily for steel machining; the DNMG150404 insert performs best in finishing and light general turning applications on steel. Can the insert be used for internal turning as well as external turning? Yes — the ISO DNMG150404 geometry and 55° approach angle make the insert suitable for both external and internal turning when matched with an appropriate holder. How does the coated cermet GT9530 compare to conventional carbide in finishing? The GT9530 coated cermet offers improved surface finish and resistance to built-up edge in finishing operations compared with many conventional carbides, extending effective edge life under stable conditions. How many usable edges does the insert provide? The insert is double-sided with a two-sided chipbreaker, enabling multiple indexing positions to maximise usable cutting edges and reduce tooling cost per edge. Which dimensions are critical when checking holder compatibility? Critical dimensions include the inscribed size (15 mm), plate thickness (4.76 mm), corner radius (0.4 mm) and the DNMG form; the hole style (cylindrical) must match the holder clamp system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance, a precise 0.4 mm corner radius and ISO compatibility for reliable finishing and extended tool life; order the insert directly via Metav Werkzeuge or consult the specialists for application guidance. DNMG 150404 GT9530 — Tungaloy Turning Insert (for Turning) The DNMG150404 GT9530 is an ISO‑standard indexable insert designed for finishing to light‑universal turning applications on steel, offering consistent surface quality and extended tool life under stable machining conditions. Coated cermet GT9530 for long tool life Rhombic 55° geometry for versatile turning 0.4 mm corner radius for fine surface finish Double-sided chipbreaker for economical use Consistent finishing quality with extended tool life The coated cermet composition of the insert delivers a balance between wear resistance and edge integrity, making it particularly suitable for finishing passes and light universal turning of steel. The fine 0.4 mm corner radius supports a superior surface finish while the GT9530 coating reduces flank wear, which in turn prolongs the service interval and lowers overall machining costs. This combination is aimed at operations where repeatable surface quality and predictable tool life are priorities. Secure fit and ISO compatibility for quick changeovers Designed to the ISO specification, the rhombic geometry with a 55° angle ensures broad compatibility with common external holders and boring bars. The insert’s cylindrical locating hole and standard dimensions simplify clamping and replacement, enabling short tool‑change times and reducing spindle downtime. The double‑sided configuration allows economical use of each cutting edge, supporting productive batch runs and stable process sequences. Process reliability under stable machining conditions When used in stable set‑ups, the insert offers reliable performance for finishing and light turning operations. The double-sided chipbreaker promotes controlled chip formation, lowering the risk of built‑up edge and improving operator confidence during longer cycles. The coated substrate also helps maintain a consistent cutting edge at moderate feeds and cutting speeds, which contributes directly to higher first‑pass yields and fewer rework operations. Material suitability and practical machining advice Optimised for steel applications, the insert excels where good surface finish and longer tool life are required. The coated cermet composition adapts well to finishing parameters; for general guidance, moderate cutting speeds and steady feeds are recommended to exploit the material’s strengths. The insert’s ISO form and thickness provide sufficient rigidity for conventional turning tasks while the 0.4 mm corner radius supports fine detail without compromising edge robustness. Contact Metav Werkzeuge for genuine Tungaloy DNMG150404 GT9530 inserts and tailored recommendations from our technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6707276 SKU: 6707276-Tungaloy Manufacturer SKU: TUN6707276 Manufacturer: Tungaloy Facts ISO designation: DNMG150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Lead/wedge angle: 55° Special features Sort: GT9530 Coated cermet cutting material Double-sided chipbreaker Rhombic insert shape Cylindrical locating hole ISO‑standard indexable turning insert Application: turning FAQ What machining tasks is this insert suited for? The DNMG150404 GT9530 insert is intended for finishing and light universal turning, especially on steel where improved surface quality and tool life are required. How does the GT9530 coating benefit production? The GT9530 coating on this Tungaloy turning insert enhances wear resistance and edge stability, resulting in longer tool life and more consistent surface finishes during finishing passes. Is the insert compatible with standard ISO holders? Yes, the DNMG150404 is ISO‑standard in shape and size, and compatibility with a holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GT9530 Wendeplatten - Tungaloy
Benefit from a cost-effective, coated cermet grade that delivers extended tool life and improved surface finish in stable turning operations; order through Metav Werkzeuge or consult the technical team for process matching. DNMG 150404 GT9530 indexable turning insert — coated cermet, 55° cutting angle — Tungaloy DNMG 150404 GT9530 is an ISO-indexable turning insert designed for finishing and light turning of steel in stable setups; compatible holders are defined by form, clearance, tolerance class, fastening, size and thickness. Coated cermet for extended tool life ISO-indexable rhombic insert, 55° cutting angle Double-sided chipbreaker with cylindrical hole Designed for finishing and light turning of steel Higher productivity through longer tool life and superior surface finish The combination of a coated cermet grade and a geometry optimised for finishing reduces downtime caused by frequent insert changes. The GT9530 grade is engineered as a wear-resistant finishing to light-universal solution, providing a balance between surface finish and tool life under stable machining conditions. For production environments where consistent component quality and reduced secondary operations matter, this insert contributes to fewer rejects and a more predictable process window. Predictable fit and stable cutting conditions for reliable turning Compatibility with the fastening system depends on insert shape, 0° clearance, tolerance class, size and thickness; the rhombic profile and 55° cutting angle make the geometry suitable for external and internal turning where access and approach angles are critical. The double-sided chipbreaker and cylindrical hole support secure clamping and permit use on both faces, effectively doubling available cutting edges. With a corner radius of 0.4 mm and a plate thickness of 4.76 mm, the geometry supports fine surface generation while maintaining sufficient edge strength for light interruptions. Practical system integration and application advice for turning steel The insert is part of an ISO-indexable system comprising a compatible external holder or boring bar, clamp plate and replacement screws; correct pairing ensures repeatable seating and clamping forces. Select a chipbreaker and grade matching the workpiece and process stability: GT9530 is suited to steel when a fine finish and extended life are priorities. For unstable conditions or heavy interrupted cuts, a more robust geometry or different grade should be chosen to protect the cutting edge and preserve cycle times. Regular monitoring of cutting forces and surface quality allows optimisation of feeds and speeds to exploit the grade's strengths without risking premature wear. For machining tasks requiring reliable finishing performance from a recognised manufacturer, contact Metav Werkzeuge to specify the DNMG150404 GT9530 insert for the application and receive tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998073 Manufacturer SKU: TUN6998073 Item SKU: 6998073-Tungaloy Article name: DNMG150404 GT9530 Tungaloy-Wendeplatte Facts Cutting angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Clearance angle: 0° Special features Grade/coating: GT9530 Cutting material type: coated cermet Plate shape: rhombic Chipbreaker: double-sided Hole: cylindrical hole Series: ISO-indexable turning inserts Application: turning; finishing to light machining of steel FAQ What materials is this insert suitable for? The DNMG150404 GT9530 Tungaloy insert is engineered primarily for machining steel, offering wear resistance and surface quality suitable for finishing and light-universal operations. How does the GT9530 grade affect tool life and surface finish? The GT9530 coated cermet provides improved resistance to flank and crater wear compared with conventional finishing grades, resulting in longer tool life and consistently better surface finish under stable cutting conditions. Is the insert reversible and how many cutting edges are available? The rhombic DNMG150404 geometry with a cylindrical hole and double-sided chipbreaker permits use on both sides, effectively providing multiple indexable edges per insert as typical for ISO-indexable systems. Which holder features are critical for correct use? Compatibility depends on holder form, clearance (0° indicated), tolerance class, fastening method, insert size (15 mm) and thickness (4.76 mm); matching these parameters ensures secure clamping and repeatable performance. Can this insert be used for roughing operations? This grade is optimised for finishing to light turning of steel; for heavy roughing or highly interrupted cuts a more robust grade and stronger geometry are recommended to avoid premature wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet grade optimised for finishing and light general-purpose turning, combined with a rhombic DNMG form and a 55° included angle for reliable chip control and surface quality; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 150404 GT9530 — Indexable Turning Insert (Turning) by Tungaloy DNMG150404 GT9530 Tungaloy turning insert for precision external and internal turning, optimised for finishing and extended tool life in stable machining conditions Coated cermet for finishing and light general use Rhombic 55° DNMG form for versatile turning Double-sided insert with centred cylindrical hole Longer tool life under stable cutting conditions Precision finish and consistent surface quality The coated cermet grade GT9530 is engineered to deliver a fine surface finish and extended wear resistance when machining steel under stable setups. The hard substrate and coating combination reduces flank wear and maintains edge integrity, which translates into fewer insert changes and less process downtime. Because the insert is intended for finishing to light general-purpose operations, it is particularly suitable where dimensional tolerance and surface quality are priorities rather than heavy stock removal. Secure seating and predictable performance The DNMG 150404 geometry with a 55° included angle and a centred cylindrical hole ensures reliable clamping and a consistent load distribution in the toolholder. The double-sided design effectively doubles usable cutting edges, while the specified 0° clearance angle helps achieve predictable tool engagement in typical external and internal turning tasks. These mechanical features reduce vibration sensitivity and support repeatable results across batch runs. Application flexibility and economical productivity Designed as an ISO‑normed indexable insert, this rhombic component combines form, tolerance and thickness compatibility with common toolholders, enabling quick integration into existing tooling systems. The double-sided chipbreaker is tailored to control chips during finishing passes on steel, improving surface integrity and reducing the need for secondary operations. Overall, the insert offers an economical balance of productivity and process stability for manufacturers seeking cost-effective precision turning. For application guidance, availability or to order Tungaloy GT9530 inserts, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or +49 2822 7131930; our technical team can advise on holder compatibility and machining parameters Technical data Article number: 6998090 SKU: 6998090-Tungaloy Manufacturer SKU: TUN6998090 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Type designation: DNMG150404 GT9530 Tungaloy-Wendeplatte Core dimensions Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Hole: with cylindrical hole Features & applications Coating / Grade: GT9530 Cutting material type: coated cermet Insert shape: rhombic (DNMG) Chipbreaker: double-sided Typical application: external and internal turning (finishing to light general use) Compatibility: ISO‑normed insert for corresponding holders FAQ What steels is this insert suitable for? The GT9530 grade is specified for machining steel, offering wear resistance and surface quality suited to finishing and light general-purpose turning. How does the DNMG 150404 form affect holder compatibility? The DNMG form, 55° included angle and standard thickness make the insert compatible with holders designed for ISO DNMG inserts; correct fit depends on form, tolerance class and fastening system. Is this insert single- or double-sided and how many edges are usable? The insert is double-sided with a chipbreaker on both faces, providing multiple usable cutting edges to extend service intervals. What is the benefit of the cylindrical hole? The centred cylindrical hole enables secure clamping and consistent seating in the toolholder, contributing to predictable cutting performance. Can this insert be used for heavy roughing operations? GT9530 is optimised for finishing to light general-purpose turning; it is not intended for heavy roughing where different grades and geometries would be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, the KS05F Tungaloy carbide grade and a compact rhombic 55° geometry for consistent turning performance; order directly via Metav Werkzeuge or consult our technical advisers for compatibility guidance. DNMG150404 KS05F Tungaloy turning insert — rhombic 55° carbide, double-sided chipbreaker DNMG150404 KS05F Tungaloy turning insert for ISO‑standard external and internal turning, designed to balance wear resistance and edge stability in a range of production tasks. ISO-standard rhombic insert, 55° approach KS05F grade for wear resistance and toughness Double-sided chipbreaker for versatile turning Cylindrical hole for secure screw clamping Consistent cutting performance through material and grade The KS05F grade, developed by Tungaloy, combines cemented carbide hardness with a degree of toughness that keeps the cutting edge stable under typical turning loads. This balance reduces the frequency of index changes and supports steady production cycles. The insert’s rhombic shape and the specified corner radius of 0.4 mm provide a compromise between edge strength and surface finish, making the insert suitable for general turning tasks where tool life and predictable wear behaviour are priorities. Selecting the correct chipbreaker geometry and cutting parameters enhances tool life and machining predictability. Secure mounting and ISO compatibility reduce setup risk Compatibility with turning holders depends on form, relief angle, tolerance class, clamping and thickness; the DNMG150404 design follows ISO conventions to simplify selection of matching holders. The insert is supplied with a cylindrical hole, allowing secure clamping by a screw and minimising play in the tool seat. When assembled as a system—insert, matching outer holder or boring bar, shim/clamp set and replacement screws—this configuration helps to maintain repeatable positioning and reduces downtime from rework or misalignment. Practical benefits in production environments The double-sided chipbreaker doubles usable edges and shortens tool change cycles, while the 55° approach angle moderates cutting forces and can improve surface finish on facing and profiling operations. The insert’s 4.76 mm plate thickness contributes to edge support, and the plate form (rhombic) permits both external and internal turning with straightforward indexing. Where stability is limited, choose a more robust chipbreaker or reduce overhang; where finish is critical, pair the insert with a finely tuned feed and speed to exploit the small corner radius. Guidance on selection, handling and indexing This indexable component is supplied as a standard ISO turning insert and can be rotated or indexed to present fresh cutting edges as wear occurs, yielding economical use of material. Handle the insert with care to avoid chipping the cutting edge; always ensure replacement screws and clamps are torqued to the holder manufacturer’s specification. For detailed cutting data, holder compatibility or advice on matching KS05F to specific workpiece materials, Metav Werkzeuge’s technical team can provide tailored recommendations and parameter charts. Contact Metav Werkzeuge for application-specific advice on the Tungaloy KS05F insert and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6934797-Tungaloy Manufacturer article number: 6934797 Manufacturer SKU: TUN6934797 Model series: ISO turning indexable inserts Designation: DNMG150404 Dimensions & core data Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Relief angle: 0° Features & application Material: cemented carbide Grade/coating: KS05F (Tungaloy grade) Chipbreaker: double-sided Hole: cylindrical hole, with hole Plate form: rhombic Intended use: turning (external and internal) System assembly: insert, matching holder or boring bar, shim/clamp set and replacement screws FAQ What work is the insert intended for? The DNMG150404 KS05F Tungaloy turning insert (SKU 6934797-Tungaloy) is intended for ISO‑standard external and internal turning operations where a balance of wear resistance and edge stability is required. How is the insert fixed in the holder? The insert features a cylindrical hole and is clamped with a screw; compatibility with a given holder is determined by form, relief angle, tolerance class, clamping and thickness, so the matching holder must be selected accordingly for the DNMG150404 KS05F. Is the insert reversible or single-use per edge? This indexable insert uses a double-sided chipbreaker, allowing multiple edges to be indexed; the design permits rotation or indexing to present fresh edges and extend service life for the DNMG150404 KS05F. What effect does the 0.4 mm corner radius have? A corner radius of 0.4 mm provides a compromise between edge strength and surface finish: it improves edge robustness compared with smaller radii while still enabling good surface quality in general turning tasks. Can this insert be used for internal boring as well as external turning? Yes, the rhombic DNMG150404 KS05F is suitable for both external and internal turning; adjust tool overhang and cutting parameters to match stability and finish requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS520 Wendeplatten - Tungaloy
Take advantage of NS520 cermet performance and ISO compatibility to secure consistent surface quality and predictable tool life; the combination of a 0.4 mm corner radius and double-sided chipbreaker reduces tooling costs and simplifies inventory management—order via Metav Werkzeuge or consult our technical advisors for application-specific guidance. DNMG 150404 NS520 — Tungaloy ISO indexable turning insert for finishing, 55° DNMG 150404 NS520 is an ISO rhombic indexable insert intended for turning applications, optimised for finishing to light machining of steel with a focus on surface quality and dimensional stability ISO-compatible rhombic insert Optimised NS520 cermet grade Double-sided chipbreaker design 0° clearance, 0.4 mm corner radius Superior surface quality and repeatable dimensional control The NS520 cermet composition delivers a fine, wear-resistant cutting edge that supports exceptionally consistent surface finish and dimensional accuracy during finishing passes. Cermet grades are engineered for minimal built-up edge and stable flank wear, which translates into fewer interrupted batches and more predictable part quality. For operations where tight tolerances and high-quality external surfaces are required, this insert provides a balance between low cutting forces and sustained edge integrity. Lower tooling cost through double-sided economy and chip control A double-sided design with integrated chipbreaker reduces the number of inserts required per job and optimises chip evacuation for stable cutting conditions. The built-in chip control improves process reliability when machining medium-to-high carbon steels in finishing to light machining modes, thereby lowering tooling consumption and increasing productive cutting time. The result is a measurable impact on unit costs across serial production or short-run batches. Reliable fit and reduced setup risk with ISO conformity The ISO designation simplifies tool selection and holder matching: compatibility is determined by insert form, relief angle, tolerance class, fastening style, size and thickness. The DNMG150404 form and standard geometry reduce the risk of mismatches in the toolholder, making setup faster and less error-prone. Where consistency across multiple centres is essential, ISO conformity helps maintain uniform clamping and repeatable cutting performance. Key dimensions that influence cutting behaviour Corner radius and insert geometry directly affect feed, finish and edge strength. A 0.4 mm corner radius provides the blend of modest edge strength and fine finish desirable in finishing operations, while a 4.76 mm thickness contributes to stable clamping and reduced vibration. The 55° approach angle is suitable for external turning tasks, balancing radial cutting forces and surface integrity. These measurable parameters make it straightforward to select cutting parameters and predict process outcomes. Material system and application advantages Built on a carbide substrate and specified as cermet or coated cermet, the grade supports a broad range of steel applications in finishing to light machining. Cermet grades offer superior oxidation resistance at moderate cutting temperatures and typically produce improved workpiece finish compared with conventional carbides. Combined with the Tungaloy manufacturing standards, the insert is aimed at users seeking reliable finishing performance with consistent wear characteristics. For reliable finishing results with Tungaloy NS520 cermet inserts, contact Metav Werkzeuge for availability and tailored machining advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6803337 Manufacturer SKU: TUN6803337 SKU: 6803337-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150404 NS520 Manufacturer: Tungaloy Application: Turning Dimensions / Core data Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Approach/lead angle: 55° Hole: with cylindrical hole Double-sided: yes Special features / Materials Grade: NS520 (cermet / coated cermet) Material: carbide substrate Shape: rhombic Chipbreaker: double-sided Suitable for: finishing to light machining of steel ISO code: 150404 Mounting compatibility by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert optimised for? The DNMG 150404 NS520 insert is optimised for finishing to light machining of steel; the NS520 cermet composition supports excellent surface quality and wear behaviour on common structural and alloy steels. Can the insert be used in standard ISO holders? Yes—the DNMG150404 form follows ISO conventions so the insert is compatible with holders that accept DNMG-type inserts, provided the holder matches the relief angle, fastening and tolerance requirements. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius provides a balance between edge strength and fine finish; it is particularly suitable for finishing passes where surface integrity and dimensional control are priorities. Is this a single-sided or double-sided insert? The insert is double-sided with an integrated chipbreaker, enabling economical use and improved chip control for finishing operations. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6803337; Manufacturer SKU TUN6803337; SKU 6803337-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS520 Wendeplatten - Tungaloy
Benefit from the combination of the NS520 cermet grade and the rhombic DNMG form with a 0.4 mm corner radius for superior surface quality and consistent wear behaviour; the ISO‑standard 55° geometry and 4.76 mm thickness ensure reliable compatibility with standard turning holders — order the DNMG150404 NS520 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed DNMG150404 NS520 Tungaloy turning insert (DNMG, 55° rhombic, 0.4 mm radius) A DNMG150404 NS520 Tungaloy turning insert designed for finishing to light machining of steel, optimised for surface quality and tight dimensional control ISO‑standard 55° rhombic geometry NS520 cermet for high surface finish 0.4 mm corner radius for fine profiles Double‑sided chipbreaker, with hole High‑precision finishing with a cermet cutting edge The NS520 grade is a cermet or coated cermet composition developed for finishing to light machining of steel, delivering a measurable improvement in surface integrity. The harder yet lubricious nature of cermet promotes a smooth contact with the workpiece, which helps to maintain dimensional accuracy during steady‑state cuts. For customers seeking consistently fine surfaces, this material choice reduces built‑up edge and supports longer periods between tool changes, providing a predictable process window in serial production. ISO geometry for straightforward holder compatibility Built to the ISO DNMG form, the insert features a 55° geometry and a 0.4 mm radius, with a 4.76 mm thickness and rhombic profile that match common external and internal turning holders. The standardised dimensions simplify tool selection: compatibility with a given holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The item includes a cylindrical centre hole for secure clamping and is double‑sided for economical use of the cutting edges. These features together reduce set‑up time and improve interchangeability on production lines. Controlled chips and even wear for reliable cycle times A double‑sided chipbreaker tailored to finishing tasks supports predictable chip formation and evacuation, which is crucial when machining medium‑to‑high‑quality steels. The NS520 composition offers stable wear characteristics that contribute to uniform flank wear and consistent part finishes over life. Explaining briefly: chipbreakers alter how the chip curls and breaks, reducing risk of entanglement and improving surface consistency. This combination of chip control and wear resistance helps to maintain cycle time reliability and lowers scrap rates in repetitive operations. Practical system considerations and application scope This insert is intended for external and internal turning operations and forms part of a system comprising an ISO insert, suitable external holder or boring bar, backing pad/clamp set and spare screws. Selection of the correct chipbreaker and grade should match workpiece material, machining strategy and machine stability; for less rigid setups the finishing‑oriented NS520 grade helps to compensate for minor variances. Where required, consult process documentation or reach out for application‑specific advice to ensure the insert aligns with production targets and machining parameters. For high‑quality finishing with proven Tungaloy performance, contact Metav Werkzeuge for availability and application guidance — Metav Werkzeuge can advise on holder compatibility and batch supply; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6803274 SKU: 6803274-Tungaloy Model series: ISO‑Drehwendeschneidplatten Shape: Rhombic Facts Geometry angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Clearance angle: 0° Manufacturer article number: 6803274 Special features Grade: NS520 (cermet / coated cermet) Schneidstofftyp: cermet or coated cermet Double‑sided chipbreaker Cylindrical centre hole Rhombic plate form (DNMG) Intended application: finishing to light machining of steel Compatible with ISO turning holders FAQ What materials is the insert suitable for? The DNMG150404 NS520 Tungaloy insert is intended primarily for steel machining, with the NS520 cermet grade optimised for finishing to light machining of steel and producing high surface quality. Is this insert compatible with standard ISO holders? Yes; the DNMG form and ISO‑standard dimensions mean compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness, so standard DNMG‑compatible holders will accept this insert. How does the NS520 grade differ from cemented carbide? NS520 is a cermet composition (or coated cermet), offering improved surface finish and reduced tendency for built‑up edge compared with some cemented carbides, making it suitable for finishing and light feeds. Can the insert be used for internal turning? The geometry and rhombic DNMG form allow use in both external and internal turning applications, provided the chosen holder or boring bar supports the insert dimensions and clamping method. How should the chipbreaker be selected for my application? Select the chipbreaker and grade according to workpiece material, machining type and machine stability; the double‑sided chipbreaker on this insert is geared towards controlled chip formation during finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Combining precise finishing performance, low cutting forces and guaranteed ISO compatibility, the DNMG150404 NS9530 insert ensures consistent surface quality and predictable clamping behaviour. Order the DNMG150404 NS9530 turning insert directly via Metav Werkzeuge or ask our consultants for application support. DNMG150404 NS9530 — ISO turning insert for finishing by Tungaloy DNMG150404 NS9530 is a Tungaloy ISO-standard rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces. ISO‑standard rhombic insert Cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker with cylindrical hole Consistent finishing and reduced rework through a dedicated cermet grade The uncoated cermet grade NS9530 is engineered for finishing steel components, delivering a sharp cutting edge that lowers cutting forces and improves surface integrity. Lower forces translate into reduced vibration and less tool-induced distortion, which in turn reduces the need for rework and inspection. For production environments where surface quality matters, the combination of a cermet cutting material and a finely honed geometry produces repeatable results in continuous cutting conditions and at small depths of cut. This makes the insert particularly suitable for precision components where a high-quality finish shortens downstream processing. Predictable clamping and interchangeability with ISO holders Designed to the ISO standard, the insert’s geometry and tolerances make compatibility with matching holders straightforward; fit is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Key dimensional data such as the 15 mm inscribed size, 4.76 mm plate thickness and 0.4 mm corner radius support consistent seating and repeatable positioning in turn-holders and boring bars. The insert features a cylindrical mounting hole and a rhombic shape that enable secure fastening and precise indexation. The result is predictable tool behaviour across tool changes and reduced set-up time when migrating between machines or rebuilding tool assemblies. Operational benefits, recommended applications and system context The DNMG150404 NS9530 is double-sided and equipped with a chipbreaker suited for finishing, which helps produce short, controllable chips in stable cutting conditions. Typical use cases include external and internal turning where a fine surface finish and low cutting forces are required. The system approach comprises the ISO insert, a compatible outer holder or boring bar, a shim/clamp set and replacement screws; selecting the correct chipbreaker and grade for the workpiece, machining strategy and machine stability ensures best results. Where cutting conditions are continuous and depths of cut are modest, this finishing insert improves cycle reliability and contributes to predictable productivity. Material suitability and practical notes for selection This insert’s cutting material and geometry make it particularly effective on steels and allied materials that respond well to sharp-edged finishing grades. The uncoated cermet substrate is optimised for low built-up edge and high surface quality rather than heavy interrupted cuts; therefore, stability of the machining set-up and appropriate feeds should be prioritised. When machining less stable parts or performing heavy stock removal, consider a tougher grade or a tool with a positive chip control adapted to intermittent cutting. For system assembly and replacement parts, ensure the holder matches the insert’s rhombic form, 0° clearance angle, and thickness to maintain clamping integrity. For precision turning applications, consider the DNMG150404 NS9530 finishing insert from Tungaloy — contact Metav Werkzeuge for tailored technical advice or ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998277 SKU: 6998277-Tungaloy Manufacturer item number: 6998277 Facts Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included hole style: cylindrical Insert geometry angle: 55° Special features Shape: rhombic (DNMG) Cutting material: uncoated cermet (NS9530) Substrate: cemented carbide Chipbreaker: double-sided, finishing type Mounting: with cylindrical hole Typical application: external and internal turning System components: ISO insert, suitable outer holder or boring bar, shim/clamp set, replacement screws FAQ What type of machining is this insert intended for? The DNMG150404 NS9530 is intended for finishing operations in turning (external and internal) where low cutting forces and a high surface finish are required. Which materials are best processed with this grade? This uncoated NS9530 cermet performs best on steels that benefit from a sharp cutting edge and continuous cutting conditions; it is optimised for fine surface quality rather than heavy interrupted cuts. How is the insert secured in the holder? The insert uses a cylindrical mounting hole and is clamped in ISO-compatible holders; correct fit depends on form, tolerance class, fastening method, size and thickness. Is the chip control suitable for finishing? Yes, the insert features a double-sided chipbreaker designed for finishing, producing short, controllable chips under stable cutting conditions. What identifiers should be quoted when ordering? When ordering, reference the DNMG150404 NS9530 designation and the SKU 6998277-Tungaloy to ensure the correct finishing insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet grade, ISO compatibility and secure, hole-mounted clamping for consistent finishing results in steel turning; order directly via Metav Werkzeuge or consult our technical team for application recommendations. DNMG 150404 NS9530 Tungaloy insert – Uncoated cermet finishing grade for turning DNMG150404 NS9530 Tungaloy-Wendeplatte is a rhombic, ISO-form insert designed for finishing turns on steel, offering a sharp cutting edge and low cutting forces DNMG geometry for versatile turning Uncoated cermet for fine finishing Sharp cutting edge for low cutting forces ISO 150404 with central hole for secure clamping High-quality finishing with a specialised cermet grade The NS9530 grade is an uncoated cermet formulated for finishing operations on steel, delivering a high surface finish with low cutting forces—advantages that translate into reduced rework and longer component life. In practice, cermet combines the wear resistance of ceramic phases with the toughness of metallic binders, which is why this grade performs particularly well in continuous cuts and when working with small depths of cut. The result is a consistent part surface and predictable tool behaviour, making the insert suitable for precision turning where surface integrity matters. Secure clamping and ISO compatibility for repeatable results The insert follows the ISO DNMG150404 form with a rhombic 55° geometry and a central cylindrical hole for clamping, ensuring reliable seating and repeatable positioning in standard holders. The plate thickness of 4.76 mm and a size designation of 15 provide robust support under finishing conditions, while the 0° clearance geometry supports neutral cutting engagements that favour small feed rates and smooth material flow. Together, these characteristics improve process stability and simplify tool changeovers in production environments. Practical benefits for workshop productivity As a finishing-grade indexable insert, this component reduces cycle variability and enables tighter tolerances with fewer passes. The sharp cutting edge of the NS9530 grade lowers cutting forces, which helps to limit workpiece distortion on thin-walled parts and improves machine loading. Using a double-sided chipbreaker and the proven geometry of this insert can lead to more predictable chip control and less manual intervention, supporting leaner workflows and higher throughput for turning applications in steel. Contact Metav Werkzeuge for tailored application advice or to request technical data sheets – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997698 SKU: 6997698-Tungaloy Manufacturer SKU: TUN6997698 Series: ISO turning indexable inserts Facts ISO designation: 150404 Geometry angle: 55° Nose radius: 0.4 mm Thickness: 4.76 mm Size: 15 Clearance angle: 0° Special features Cutting material: uncoated cermet (NS9530) Substrate: cemented carbide Chipbreaker: double-sided Mounting: with cylindrical hole Shape: rhombic, 55° Application: turning Intended use: finishing of steel FAQ What materials is this insert optimised for? The DNMG150404 NS9530 insert is optimised for finishing operations on steel, where its uncoated cermet grade delivers low cutting forces and a high surface finish. Can the DNMG150404 be used in standard ISO holders? Yes, the insert conforms to the ISO DNMG150404 form and is compatible with standard holders that accept the 15-size rhombic insert with a central cylindrical hole. What is the nose radius and how does it affect the surface finish? The nose radius is 0.4 mm; this modest radius supports fine surface finishes and precise dimensional control during finishing passes with small depths of cut. Is the NS9530 grade suited to interrupted cuts? NS9530 is primarily a finishing grade intended for continuous cuts and small feed rates; its sharp edge and composition favour steady machining rather than heavily interrupted conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, economical double-sided use and ISO‑compatibility for reliable turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for matching toolholder solutions. DNMG150404 NS9530 Tungaloy indexable insert for turning — 55° rhombic, 0.4 mm nose radius A DNMG150404 NS9530 Tungaloy indexable insert designed for finishing operations in steel turning, offering a sharp cutting edge and optimised continuous‑cut performance. Precision finishing cermet for steel turning Sharp cutting edge for low cutting forces Double-sided insert for economical use Rhombic 55° geometry with 0.4 mm radius High-quality finishing with low cutting forces The DNMG150404 NS9530 is an ISO‑standard rhombic insert developed as a finishing grade for turning operations in steel. Manufactured from an uncoated cermet, the grade delivers a consistently sharp edge that reduces cutting forces and supports stable chip formation during continuous cuts. For production environments where surface integrity matters, the insert’s geometry and material composition are intended to produce an improved surface finish while maintaining tool life. The cermet substrate combines hardness with toughness, which enables lower built-up edge tendencies and a finer result on turned surfaces. Economical, repeatable performance on double‑sided design The two usable faces of this indexable insert increase tool utilisation and lower per‑cutting‑edge cost, while the central cylindrical hole and standardised form permit straightforward clamping in compatible holders. The 55° approach angle gives a balance between cutting force direction and component form control, and the 0.4 mm nose radius is suited to fine finishing where dimensional consistency is required. Because the insert conforms to ISO dimensions, selection of a matching external holder or boring bar is simplified; compatibility is determined by form, relief angle, tolerance class, fastening type, size and thickness, which are standardised to ease integration into existing tool systems. Clear application range and material benefits This grade is optimised for external and internal turning where small depths of cut and continuous feed are common. The NS9530 composition is especially effective on steels, combining repeatable edge integrity with good surface quality under stable cutting conditions. Technical setups that favour finishing cuts will benefit from reduced vibration sensitivity and predictable wear behaviour. For workshops evaluating cutting strategies, the cermet option is presented as a logical choice when prioritising surface quality and low cutting forces over heavy material removal rates. Contact Metav Werkzeuge for application advice on the Tungaloy NS9530 cermet insert, availability and assistance selecting the correct holder — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998262 SKU: 6998262-Tungaloy Manufacturer SKU: TUN6998262 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Insert designation: DNMG150404 Size: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Approach angle: 55° Special features Material: carbide Grade: NS9530 (uncoated cermet) Relief angle: 0° Hole: with hole Hole style: cylindrical hole Plate form: rhombic Chipbreaker: double-sided Typical application: external and internal turning FAQ What cutting tasks is this insert best suited to? The NS9530 cermet grade insert is intended for finishing turning operations on steel, where continuous cuts and a sharp cutting edge deliver superior surface quality. Can the insert be used in standard ISO holders? Yes, the DNMG150404 conforms to ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening type, size and thickness. How does the double‑sided design affect productivity? A double‑sided insert allows two cutting edges per index, enhancing economical use and reducing downtime for edge changes. What does the 0.4 mm nose radius mean for component finish? A 0.4 mm nose radius provides a fine balance between strength and detail in the turned profile, helping to achieve consistent surface finish for finishing cuts. Is the NS9530 coated? The NS9530 grade is supplied as an uncoated cermet, optimised for sharp cutting performance and low cutting forces in finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the DNMG 150404 NS9530 insert's sharp cutting edge, low cutting forces and ISO-standard form for consistent finishing results; order directly via Metav Werkzeuge or consult the technical team for application advice. DNMG 150404 NS9530 – Indexable turning insert for turning, uncoated cermet, 0° clearance (Tungaloy) The DNMG 150404 NS9530 is an ISO-format rhombic indexable insert designed for finishing operations on steel, offering a sharp cutting edge and optimised chip control for continuous cuts. ISO-format rhombic insert Uncoated cermet NS9530 finishing grade 0° clearance for precise finishing Double-sided chipbreaker with central hole Consistent finishing with low cutting forces The rhombic geometry with a 55° included angle and a 0° clearance produces a stable cutting condition that reduces rubbing and minimises thrust forces during light cuts. As a finishing grade, the uncoated cermet NS9530 offers a sharp cutting edge and low cutting forces that translate directly into improved surface finish and reduced requirement for secondary operations. The ISO standard form guarantees compatibility with a wide range of indexable holders, enabling quick tool changes and predictable repeatability across setups. Reliable chip control and economical indexing A double-sided chipbreaker combined with a cylindrical central hole enables secure clamping and effective chip formation when machining continuous cuts and small depths of cut. The insert’s 0.4 mm corner radius balances edge strength and fine finish, while the double-sided design doubles tool life per insert by allowing rotation after one edge is worn. This configuration supports a cost-effective finishing strategy by extending usable life and maintaining consistent part quality with minimal setup changes. Application guidance and material suitability Specifically formulated as a finishing grade for steel, the cutting material class NS9530 is optimised for continuous turning where high surface quality is required. The combination of a cermet cutting grade and a carbide body (as indicated in the technical data) ensures a wear-resistant edge that performs well under low to moderate cutting speeds typical for finishing cycles. For best results, select feeds and depths that favour light, continuous engagement rather than interrupted cuts, and ensure the holder and clamping components match the ISO form, size and thickness to maintain repeatable performance. Discuss application-specific recommendations for the Tungaloy NS9530 finishing insert with Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and technical assistance Technical Data Article number: 6997697 Manufacturer SKU: TUN6997697 SKU: 6997697-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° ISO designation: 150404 Special features Rhombic plate form Double-sided chipbreaker Central cylindrical hole Uncoated cermet cutting grade NS9530 Material: carbide Application: turning Compatibility: ISO-standard insert form and dimensions FAQ What materials is this insert suitable for? The DNMG 150404 NS9530 is specified as a finishing grade for steel and is optimised for continuous turning where a high-quality surface finish is required. How does the NS9530 grade affect surface finish? The uncoated NS9530 cermet provides a sharp cutting edge and low cutting forces, which contribute to a finer surface finish and reduced need for subsequent polishing. Can the insert be indexed to use both cutting edges? Yes, the insert is double-sided; the design permits rotation to the second edge after the first edge reaches wear limits, improving cost efficiency per insert. What must be matched for secure clamping in the holder? Compatibility depends on the ISO form, thickness (4.76 mm), size (15 mm) and the central cylindrical hole; matching these dimensions ensures proper seating and clamping stability. Is this insert suitable for interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; performance in interrupted cuts may be limited and should be validated for the specific application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Conflicting product data: the declared base material (Hartmetall) conflicts with the specified cutting material (uncoated cermet); please correct the information before a product description can be generated, as accurate and consistent data is essential for ensuring the reliability and clarity of the product details provided to customers, which in turn helps to avoid potential misunderstandings, errors, or discrepancies that could arise during the manufacturing, marketing, or purchasing processes, ultimately ensuring that the product meets the required specifications and expectations while maintaining the integrity and trustworthiness of the information presented in the product catalogue or database.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and ISO compatibility for reliable turning operations. Order the DNMG150404 NS9530 insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. DNMG150404 NS9530 Tungaloy turning insert — uncoated cermet for finishing, rhombic 15 mm The DNMG150404 NS9530 Tungaloy is an ISO rhombic turning insert designed for fine finishing of steel components in continuous cut conditions ISO rhombic insert DNMG 150404 Uncoated cermet NS9530 for finishing 0° clearance for consistent contact Double-sided chipbreaker, with cylindrical hole Consistent surface quality through low cutting forces The uncoated cermet NS9530 offers a particularly sharp cutting edge and reduced cutting forces, which directly improves the achievable surface finish on steel parts. As a finishing grade, the material formulation is optimised for continuous cuts and small depths of cut, meaning fewer passes and less rework. The result is stable part tolerances and a reduction in downstream polishing or grinding, which supports a more economical production flow. ISO compatibility and secure clamping for repeatable results Built to ISO dimensions, the insert ensures predictable fit and function with standard holders: compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. The rhombic geometry with a 55° main cutting angle and a corner radius of 0.4 mm provides a balance between fine edge definition and strength. The cylindrical hole and standard mounting arrangement give robust clamping and repeatable seating, which reduces setup variation and increases first-pass yield. Productivity gains from chip control and neutral clearance The double-sided chipbreaker is tailored to finishing cuts and aids controlled chip formation, improving tool life and machine uptime. With a 0° clearance the insert delivers a stable contact geometry that helps maintain a sharp edge under finishing conditions. Together, these features lead to more predictable cycle times and consistent part quality, supporting higher productivity on serial turning tasks. Practical application and machining advice Intended for external and internal turning of steel, the insert is best applied where continuous cutting and fine surface requirements dominate. Select the chipbreaker and grade to match workpiece material and machining stability; the cermet grade excels in low-force finish passes. When integrating into an existing toolset, verify the holder form and tolerance class to ensure correct seating and torque on the clamping screw. Durability and handling considerations Although specified as an uncoated cermet, the geometry and double-sided design allow economical indexing and straightforward stock management. The combination of a sharp edge and stable chip control reduces burr formation and the need for secondary operations. Handling precautions are standard for sharp carbide-based inserts: avoid dropping and ensure correct torque on the clamping screw to prevent micro-movement during high-speed finishing. Contact Metav Werkzeuge for tailored application support and to request detailed machining parameters for the Tungaloy DNMG150404 NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998175 SKU: 6998175-Tungaloy Manufacturer SKU: TUN6998175 Model series: ISO turning inserts Application: Turning Specifications Insert designation: DNMG150404 Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Main cutting angle: 55° Hole: with cylindrical hole Materials and features Cutting material: uncoated cermet NS9530 Base material: Hartmetall Plate shape: rhombic Chipbreaker: double-sided System build: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert best suited for? The DNMG150404 NS9530 insert is a finishing grade specifically for steel; the uncoated NS9530 cermet is optimised for continuous cuts and small depths of cut on steel components. Can the insert be used for roughing operations? This grade is designed as a finishing sort; for heavy roughing the DNMG150404 NS9530 insert may wear faster than grades intended for high material removal, so a tougher grade is recommended for roughing. How is chip control achieved with this insert? Chip control is provided by the double-sided chipbreaker integrated on the DNMG150404 NS9530, which supports consistent chip formation and reduced burrs in finish turning. Is the insert indexable and economical to use? Yes, the double-sided design allows indexing to a fresh edge, offering economical use per insert and straightforward stock management for serial production. Which holders are compatible with the DNMG150404 NS9530? Compatibility relies on matching the ISO form, relief angle, tolerance class, fastening method, size and thickness; use ISO DNMG-compatible external holders or boring bars and the correct shim/clamp set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Product data inconsistency detected: the entry describes the same item both as "cemented carbide" and as an "uncoated cermet" cutting grade (NS9530). These are distinct cutting-material families with different performance characteristics; the contradiction prevents the creation of a reliable, production-ready product description. Please provide corrected and consistent specifications—confirm whether the insert is a cermet grade or a carbide grade, and verify the coating status and material designation. Once the material and related technical details are clarified, a full product text optimised for industrial use and purchasing can be produced. For data corrections or further technical clarification, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and reliable chip control offered by the NS9530 cermet grade for smoother production. The DNMG150404 geometry and 0.4 mm corner radius deliver consistent surface quality and straightforward tool indexing — order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150404 NS9530 — Tungaloy indexable turning insert (uncoated cermet, finishing for steel) The DNMG150404 NS9530 Tungaloy insert is designed for precision external and internal turning, offering a finishing-grade solution for continuous cuts and small depth-of-cut operations. ISO DNMG geometry for standard toolholders Uncoated cermet grade NS9530 for finishing Double-sided chipbreaker for reliable chip control Sharp cutting edge for low cutting forces Consistent finishing and low cutting forces for superior surface quality The NS9530 grade is an uncoated cermet engineered for finishing cuts on steel, combining a sharp cutting edge with reduced cutting forces to improve surface appearance and dimensional consistency. Cermet substrates provide fine-grain hardness and thermal stability that help maintain a clean cut during continuous operations and small depth passes. For production environments requiring repeatable part finish, this grade supports improved machining stability and easier attainment of target tolerances without the need for heavy machining parameters. Plug-and-play compatibility for ISO tool systems The insert follows the ISO DNMG150404 geometry and is compatible with matching DNMG toolholders when the form, relief angle, tolerance class, clamping method, size and thickness correspond. Key dimensional characteristics include a 15 mm inscribed circle, 4.76 mm thickness, rhombic shape, a 0.4 mm corner radius and a 55° approach angle with a 0° relief angle; the piece features a cylindrical hole for secure indexing. Understanding these parameters simplifies holder selection and reduces trial-and-error during tool changeover, enabling quicker setup and consistent cutting performance. Reliable chip control and productive indexing Equipped with a double-sided chipbreaker, the insert supports efficient chip formation and evacuation during turning, which reduces cycle interruptions and improves process reliability. Being double-sided also increases usable edge count, which contributes to lower tool change frequency and better economics in batch production. For machining centres and lathes focused on throughput and surface finish, the chip control design helps prevent built-up edge and maintains steady cutting behaviour under continuous feed conditions. Practical system advice and recommended use The system comprises the insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws. Select the NS9530 finishing grade and the appropriate chipbreaker based on workpiece material, machining method and machine/tool stability. The insert performs best in finishing applications on steel under steady-cut regimes and small depths of cut; choose stable fixturing and the correct holder geometry to exploit the grade’s low cutting-force advantage and to achieve the desired surface finish. For high-quality finishing with the Tungaloy NS9530 insert, contact Metav Werkzeuge for tailored holder recommendations and availability — eMail: info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6998161 SKU: 6998161-Tungaloy Manufacturer SKU: TUN6998161 Facts Designation: DNMG150404 Grade: NS9530 Material: Carbide Series: ISO turning insert series Application: Turning Size: 15 mm Thickness: 4.76 mm Approach angle: 55° Relief angle: 0° Corner radius: 0.4 mm Special features Shape: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Cutting behaviour: finishing grade for steel Typical setup: insert + holder + shim/clamping set + screws FAQ What machining operations suit this insert best? The DNMG150404 NS9530 insert is optimised for finishing in external and internal turning on steel, delivering high surface quality in continuous-cut and small-depth operations. How does the NS9530 grade affect cutting forces? The NS9530 uncoated cermet grade features a sharp cutting edge that produces low cutting forces, which assists in achieving improved surface finish and reduces stress on the workpiece. Can the insert be indexed to use multiple cutting edges? Yes; the insert is double-sided with a cylindrical hole and can be indexed to access fresh edges, improving edge utilisation and uptime. Which holder characteristics are required for compatibility? Compatibility depends on matching the DNMG form, relief angle, tolerance class, clamping style, size (15 mm) and thickness (4.76 mm) of the insert; select a corresponding ISO DNMG toolholder. Is the DNMG150404 NS9530 suitable for interrupted cuts? The grade is optimised for continuous cutting and small cuts; for heavy interrupted cuts, consider a grade designed for higher toughness rather than this finishing cermet. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp NS9530 cermet grade, low cutting forces and a precise 0.4 mm corner radius for superior finishing results; order directly via Metav Werkzeuge or request advice from our consultants for proper holder compatibility and rapid delivery. DNMG 150404 NS9530 ISO turning insert — finishing grade by Tungaloy DNMG150404 NS9530 is an ISO-format indexable turning insert designed for finishing operations on steels, offering a sharp cutting edge and consistent surface quality in continuous cuts. Sharp NS9530 cermet grade for finishing 0° rake angle for low cutting forces 0.4 mm corner radius for fine surface finish Rhombic 15 mm form with cylindrical hole Achieve consistent high-quality finishes on steel components The NS9530 cermet grade is formulated as an uncoated finishing material that provides a sharp cutting edge and reduced cutting forces, making it especially suitable for continuous turning of steel. The improved edge geometry helps to lower vibration and heat generation, which directly benefits surface quality and repeatability in production. For workshops requiring predictable outcomes on finishing passes, this insert gives a reliable compromise between edge stability and low intrusion into the workpiece, resulting in fewer rework cycles and an efficient machining sequence. Designed for dependable fit and predictable performance The ISO designation and rhombic geometry ensure broad compatibility with ISO external holders and boring bars when the form, relief angle, tolerance class, clamping method, size and thickness are matched. The insert has a 0° rake angle and a 0.4 mm corner radius, features that deliver controllable chip formation and fine profile accuracy on small depths of cut. The central cylindrical hole secures the insert reliably to the seat using standard clamping sets and screws, reducing the risk of misalignment during high-speed finishing cycles. Choosing a holder with matching seat geometry and tolerance is essential to realise the full benefit of the insert’s geometry. Practical application advice for production environments Use the insert as a finishing grade for external and internal turning where low cutting forces and excellent surface finish are priorities. The double-sided chipbreaker design allows economical indexability, doubling the usable life per insert in many applications. For best results, pair the grade with stable setups and modest feed rates during final passes; this reduces cutting temperature and preserves the sharp edge. The product’s ISO format also simplifies inventory management across mixed toolrooms, enabling straightforward replacement and fewer adapter parts. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for application-specific recommendations and fast, reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998157 SKU (manufacturer): TUN6998157 SKU (site): 6998157-Tungaloy Facts ISO designation: 150404 Insert designation: DNMG150404 Corner radius: 0.4 mm Thickness: 4.76 mm Size: 15 mm Relief/rake angle: 0° Plate angle: 55° Special features Grade: NS9530 (uncoated cermet) Geometry: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning (finishing) Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The DNMG150404 NS9530 insert is specified as a finishing grade for steel and is optimised for continuous turning applications where a fine surface finish is required. Is the insert coated or uncoated? The NS9530 grade is an uncoated cermet designed to provide a sharp edge and low cutting forces in finishing operations. How does the 0.4 mm corner radius affect the finish? A 0.4 mm radius helps to produce a fine surface texture and reduces the tendency for edge chipping during light finishing cuts. Can the insert be indexed to use multiple cutting edges? Yes, the geometry and double-sided chipbreaker allow indexing to a fresh edge, effectively extending service life in routine turning tasks. Which ISO holders will accept this insert? The insert follows ISO dimensions for DNMG inserts; compatibility depends on matching form, relief angle, tolerance class, clamping method, size and thickness with the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the uncoated cermet NS9530 for fine finishing, the 0.4 mm corner radius for superior surface quality, and the ISO compatibility that simplifies holder selection; order through Metav Werkzeuge or ask their consultants for assistance. DNMG150404 NS9530 Tungaloy turning insert — ISO rhombic finishing insert, 0.4 mm radius The DNMG150404 NS9530 Tungaloy turning insert is an ISO‑standard, rhombic insert designed for finishing operations in turning, optimised for steel machining with a carbide substrate and uncoated cermet grade. ISO‑standard rhombic turning insert Uncoated cermet grade NS9530 for fine finishing 0.4 mm corner radius for superior surface quality Cylindrical hole, compatible with standard holders Achieve consistently high surface quality with a finishing grade designed for steel The insert combines a carbide substrate with an uncoated cermet cutting material, offering a sharp cutting edge and low cutting forces that help maintain dimensional accuracy during finishing passes. The geometry and material selection promote continuous chip flow and minimise built‑up edge, which translates into improved surface finishes and fewer reworks. As an ISO‑conforming rhombic insert, it fits a broad range of standard holders when the form, clearance angle and tolerance class are matched, simplifying tool changeovers in production environments. Stable performance through refined geometry and double‑sided usability With a 0.4 mm corner radius and a 55° included angle, this insert is tailored for fine turning where surface integrity matters. The double‑sided chipbreaker design extends tool life by balancing cutting forces and controlling chip formation, especially in continuous cuts and small depths of cut. The cylindrical hole ensures secure clamping in compatible toolholders and facilitates repeatable positioning. These technical characteristics reduce vibration sensitivity and support consistent cycle times on medium‑ to high‑rigidity setups. Practical compatibility and application guidance for workshop use The insert is supplied in the ISO designation DNMG150404 and is intended primarily for turning stainless and carbon steels in finishing applications; select the chipbreaker and grade according to workpiece material and machining stability. The NS9530 grade is particularly suited to continuous turning with small feeds, where a sharp edge and good surface finish are required. When integrating the insert into an existing tool system, verify holder compatibility by checking form, free clearance angle, tolerance class, fixing method, size and thickness to ensure secure, accurate clamping. For reliable finishing on steel components, request availability of the DNMG150404 NS9530 from Metav Werkzeuge or consult their technical advisors at info@metav-werkzeuge.com | +49 2822 7131930 to confirm optimal holder selection and delivery details. Technical data Article number: 6998155 SKU: 6998155-Tungaloy Manufacturer SKU: TUN6998155 Model series: ISO‑Drehwendeschneidplatten Label: DNMG150404 NS9530 Tungaloy‑Wendeplatte Core dimensions Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Angle: 55° Features Rhombic insert form Cylindrical hole Double‑sided chipbreaker Uncoated cermet grade NS9530 Carbide substrate ISO‑standard turning insert Intended use: turning; finishing on steel FAQ What materials is this insert suited for? The DNMG150404 NS9530 is a finishing grade designed predominantly for steel machining; the uncoated cermet provides a sharp edge and low cutting forces suitable for continuous turning and small depths of cut. Is the insert reversible or single‑use? The insert is double‑sided with a reversible geometry, allowing both cutting edges to be used before replacement, which improves cost efficiency and tool utilisation. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free clearance angle, tolerance class, fixing method, size and thickness; the DNMG150404 designation follows ISO standards and fits holders built to the same ISO specification when these parameters match. Does the grade have a coating? No, the NS9530 grade supplied here is an uncoated cermet, chosen for its sharp edge and superior surface finish in finishing operations. What edge preparation does the 0.4 mm radius provide? A 0.4 mm corner radius balances edge strength and surface finish, offering reduced chipping risk compared with sharper radii while maintaining the ability to achieve fine surface quality in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet finishing grade, low cutting forces and a secure clamping design for reliable, high-quality finishing on steel; order directly via Metav Werkzeuge or consult the team for application matching. DNMG150404 NS9530 Tungaloy turning insert — finishing cermet, 55° The DNMG150404 NS9530 is an ISO-indexed turning insert designed for finishing operations in turning, offering a sharp cutting edge and optimised chip control for continuous cuts. ISO DNMG150404 form, 55° lead angle Cermet grade NS9530 for fine finishing Double-sided chipbreaker, cylindrical hole Low cutting forces, sharp cutting edge Consistent finishing quality for steel components The NS9530 cermet finishing grade is formulated to deliver a sharp cutting edge and low cutting forces, which together enable superior surface finishes on steel workpieces. As an uncoated cermet insert, it minimises built-up edge during continuous cuts and short, precise engagements, reducing the need for secondary operations. The combination of a finely graded substrate and a defined nose geometry ensures repeatable results across batch runs, making the insert particularly suitable for shops prioritising surface integrity and dimensional stability. Predictable chip control and secure clamping for longer productive runs A double-sided chipbreaker and a cylindrical hole contribute to consistent chip formation and secure seat fixation in the toolholder. The chipbreaker is optimised for small depths of cut and continuous turning, promoting steady chip evacuation and decreasing the risk of irregular chip build-up. Secure clamping, aided by the through-hole, reduces vibration and maintains cutting-edge position, which in turn supports tool life and process reliability during medium- to long-length production runs. Simple integration into ISO toolholder systems with clear dimensions The insert follows ISO form conventions for rhombic turning inserts and is compatible with ISO-style holders when the holder’s form, clearance angle, tolerance class, fastening and size match the insert specification. Key dimensions include an inscribed circle of 15 mm, a thickness of 4.76 mm, a nose radius of 0.4 mm and a lead angle of 55° with a 0° rake/clearance. These defined figures support straightforward setup and predictable cutting geometry when selecting or verifying a suitable external or internal turning holder. Who benefits and typical applications in production Job shops and production departments performing finishing passes on steel components will find the combination of NS9530 grade and the rhombic insert form advantageous for precision turning tasks. The insert is geared towards external and internal finishing where surface quality and low cutting forces are priorities. For operations that require tight tolerances and consistent surface texture, the uncoated cermet insert provides a balance of sharpness and wear resistance, reducing rework and supporting efficient throughput. For precise finishing with the Tungaloy NS9530 DNMG150404, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt supply. Technical data Article number: 6707286 Manufacturer SKU: TUN6707286 Vendor SKU: 6707286-Tungaloy Designation: DNMG150404 Grade: NS9530 Model series: ISO turning inserts Material: Cemented carbide Key dimensions & figures Inscribed circle: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Lead angle: 55° Rake/clearance: 0° Features & compatibility Rhombic shape with cylindrical hole Double-sided chipbreaker Uncoated cermet finishing grade Application: turning, external and internal finishing Compatibility depends on holder form, clearance, tolerance, fastening, size, thickness FAQ Which materials is this insert best suited for? The DNMG150404 NS9530 is an uncoated cermet finishing grade optimised for steel, delivering low cutting forces and excellent surface finish for finishing operations. Can the insert be used for internal as well as external turning? Yes; the DNMG150404 geometry and the double-sided chipbreaker support both external and internal turning when paired with a compatible holder and correct mounting. What are the key dimensions to check before fitting the insert? Confirm the inscribed circle (15 mm), thickness (4.76 mm), nose radius (0.4 mm) and the 55° lead angle, and ensure the holder accepts a rhombic insert with a cylindrical locating hole. Is the cutting material coated? No, the NS9530 grade is an uncoated cermet developed specifically for finishing with a sharp edge and reduced cutting forces. How does the chipbreaker affect machining performance? The double-sided chipbreaker is designed for continuous cuts and small depths of cut, promoting stable chip formation and improving surface quality during finishing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Taking advantage of the NS9530 uncoated cermet and the precise 0.4 mm nose radius, this ISO‑standard insert delivers consistent finishing performance for turning applications; order original Tungaloy inserts via Metav Werkzeuge or consult our specialists for application-specific selection. DNMG150404 NS9530 Tungaloy insert — ISO turning insert for fine finishing DNMG150404 NS9530 Tungaloy insert is an ISO‑normed rhombic turning insert designed for fine finishing of steel components in continuous cutting operations. ISO DNMG shape, 55° cutting angle NS9530 uncoated cermet for fine finishing 0.4 mm nose radius for high surface quality Double-sided insert with cylindrical central hole Optimised finishing for steel turning with predictable results The NS9530 grade is an uncoated cermet developed for finishing operations on steel, offering a sharp cutting edge that reduces cutting forces and improves surface integrity. The small 0.4 mm nose radius combined with the 55° rhombic geometry produces high‑quality surface finishes on continuous cuts and small depth‑of‑cut conditions. For engineers seeking repeatable part quality, the material and geometry together minimise vibration sensitivity and support stable chip formation, which in turn reduces the need for secondary finishing. Compatibility and secure clamping for production reliability Manufactured to ISO dimensions, the DNMG150404 indexable insert fits common ISO holders when form, relief angle, tolerance class, fastening method, size and thickness are matched. The central cylindrical hole and the double‑sided design allow straightforward indexing and economical use of the cutting edges. Clear system understanding — insert, matching outside holder or boring bar, shim/clamp set and replacement screw — ensures rapid changeover and consistent seating, helping to maintain cycle times and reduce downtime in production environments. Efficient machining thanks to targeted grade properties The uncoated cermet chemistry of NS9530 is optimised for low cutting forces and excellent surface finish at finishing feeds and speeds. In practice this means reduced tool‑related rework and higher first‑pass yield for precision components. Where continuous cutting predominates, the sharp edge geometry and stable chip control yield a predictable tool life; the result is better process economics through lower variability and fewer unplanned interventions. Practical handling and application advice for setup and use The insert’s rhombic plate form (15 mm size) and 4.76 mm thickness provide mechanical stability while keeping the cutting edge accessible for fine turn finishing. Because holder compatibility depends on geometric match, selecting an ISO‑compliant holder with the correct relief and clamping geometry is essential; matching these elements preserves edge life and secures repeatable performance. For tailored recommendations regarding holder selection or cutting data for a particular steel grade, Metav Werkzeuge can advise on feed, speed and depth‑of‑cut settings to get optimal results from this finishing insert. Contact Metav Werkzeuge for application advice or to secure original Tungaloy DNMG150404 NS9530 inserts — Metav Werkzeuge GmbH is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6998146 SKU (manufacturer): TUN6998146 Model series: ISO‑Drehwendeschneidplatten Label: DNMG150404 NS9530 Tungaloy‑Wendeplatte Facts Nose radius: 0.4 mm Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Relief angle: 0° Special features ISO designation: DNMG150404 Grade: uncoated cermet NS9530 Application: turning (finishing) Plate form: rhombic Chipbreaker: double‑sided Hole: with cylindrical central hole Typical system: insert + outside holder/boring bar + shim/clamp + replacement screw FAQ What steels is this insert best suited for? This DNMG150404 NS9530 Tungaloy insert is a finishing grade optimised for steel, offering low cutting forces and a sharp edge suitable for continuous cutting and small depths of cut. Can the insert be indexed, and how many usable edges are there? The insert is double‑sided with a central cylindrical hole, enabling indexing to multiple usable cutting edges; exact edge count depends on the holder and mounting orientation. Which holder type is compatible with this ISO insert? Compatibility requires a holder matching the DNMG form, relief angle, tolerance class, fastening method, size and thickness; Metav Werkzeuge can recommend appropriate ISO holders for stable clamping. Is the NS9530 grade coated? No — NS9530 is an uncoated cermet grade designed to provide a sharp edge for finishing applications on steel. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade cermet with a sharp cutting edge and ISO compatibility to secure consistent surface quality and low cutting forces in turning operations. Order the DNMG150404 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 NS9530 Tungaloy turning insert — ISO turning insert for finishing The DNMG150404 NS9530 Tungaloy insert is an ISO rhombic turning insert designed for finishing cuts on steel, offering a combination of a sharp geometry and a double-sided chipbreaker for continuous cutting. Cermet finishing grade NS9530 Sharp cutting edge for low cutting forces Double-sided chipbreaker, rhombic shape ISO DNMG 150404 with cylindrical hole Engineered for high-quality finishing on steel The insert is built around the NS9530 finishing grade, an uncoated cermet that provides a sharp cutting edge and low cutting forces, which together promote superior surface finish on machined components. For operations requiring continuous cutting and small depths of cut, the material and edge geometry reduce built-up edge and enable consistent part tolerance. The combination of a fine carbide-like matrix and ceramic phases gives the grade a balance between edge stability and low cutting resistance, resulting in predictable finishing performance and fewer rework cycles. ISO compatibility and secure clamping for reliable turning Delivered in the ISO DNMG format, the insert's rhombic geometry and the cylindrical hole enable straightforward integration into industry-standard holders; compatibility is defined by shape, 0° clearance angle, tolerance class, fastening method, size and thickness. The insert thickness of 4.76 mm and nominal size 15 mm, together with the 0.4 mm corner radius, provide a clear specification for selecting holders and cutting parameters. This predictable interface simplifies tool inventory management and reduces setup time when switching between machines or tool families. Stable chip control to boost process efficiency The double-sided chipbreaker is designed to manage chips effectively during finishing passes, maintaining consistent chip form across similar materials and cutting conditions. The uncoated cermet composition supports steady edge wear under low to moderate cutting speeds, enabling longer productive intervals and stable dimensional results. Where surface quality and repeatability are critical, the insert's geometry helps to maintain cutting stability, reduce vibrations and allow higher feed rates within the finishing envelope, thereby improving throughput without sacrificing part quality. Contact Metav Werkzeuge to discuss how the Tungaloy DNMG150404 NS9530 insert fits specific turning applications, or request tailored cutting recommendations from our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998172 SKU: 6998172-Tungaloy Manufacturer SKU: TUN6998172 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG150404 NS9530 Tungaloy-Wendeplatte Core data Corner radius: 0.4 mm Thickness: 4.76 mm Size: 15 mm Included angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Shape: rhombic Application: turning (external and internal); finishing Suitable for: continuous cutting and small depths of cut Compatibility: ISO DNMG format; holder selection by form and tolerance FAQ What materials is this insert intended for? The DNMG150404 NS9530 Tungaloy insert is optimised as a finishing grade for steel, offering a combination of low cutting forces and a sharp edge for high surface quality. Can the insert be used for internal turning as well as external turning? Yes, the rhombic ISO DNMG format and the cylindrical hole allow use in suitable holders for both external and internal turning operations when the holder geometry permits. How does the double-sided chipbreaker affect productivity? The double-sided chipbreaker on this insert promotes stable chip formation and reduces the risk of irregular chips during finishing, which aids process stability and can increase overall throughput. What are the key dimensions to check for holder compatibility? Check the insert size (15 mm), thickness (4.76 mm), corner radius (0.4 mm) and the DNMG format to ensure the holder's pocket, clamp and fasteners match the insert specifications. Is the NS9530 grade coated or uncoated? The NS9530 grade is an uncoated cermet finishing grade designed for continuous cuts and small depths of cut, prioritising surface finish and low cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing on steel thanks to the uncoated cermet NS9530 and the 0.4 mm nose radius, which combine low cutting forces with consistent surface finish; order the DNMG150404 NS9530 Tungaloy insert via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150404 NS9530 Tungaloy insert — ISO turning insert, 0.4 mm radius A DNMG150404 NS9530 Tungaloy insert engineered for precision external and internal turning on steel, optimised for finishing passes and small depths of cut Finishing-grade uncoated cermet NS9530 0.4 mm nose radius for fine tolerances ISO DNMG150404 rhombic geometry Double-sided insert with cylindrical hole High-quality finishing performance for steel turning The DNMG150404 in the NS9530 grade is an uncoated cermet developed for finishing applications on steel. Its sharp cutting edge and low cutting forces reduce built-up edge and help achieve a high surface finish even on continuous cuts and small depths of cut. Cermet grades combine ceramic hardness with metallic toughness, which in this case supports reduced friction and improved dimensional stability during long finishing cycles. The result is fewer reworks and more consistent part quality in serial production. Geometry and clamping for consistent productivity The insert’s rhombic DNMG150404 geometry with a 55° included angle and 0° relief ensures predictable engagement in typical ISO holders. The 0.4 mm nose radius provides a balance between fine detail and edge strength, making the insert suitable where tight tolerances and low roughness are required. Being double-sided with a cylindrical hole, the insert offers economical indexing and secure clamping; compatibility with the chosen holder is determined by form, clearance angle, tolerance class, clamp style, size and thickness, allowing straightforward integration into established tool systems. Process stability, efficiency and economical operation Selected for finishing, the NS9530 grade supports stable chip formation and repeatable surface integrity on steel, which contributes to process reliability and predictable cycle times. The combination of low cutting forces and a sharp edge reduces machine load and can lower energy demand in high-volume operations. Produced to ISO standards and manufactured by Tungaloy, the insert offers consistent batch-to-batch performance and simplifies tool management for production environments that prioritise surface quality and repeatability. For guaranteed finishing performance with the DNMG150404 NS9530 from Tungaloy, contact Metav Werkzeuge on +49 2822 7131930 or info@metav-werkzeuge.com to discuss application details or place an order Technical data Article number: 6998163 Manufacturer item number: 6998163 SKU: 6998163-Tungaloy Manufacturer SKU: TUN6998163 Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Grade: NS9530 (uncoated cermet) Material: cemented carbide Geometry: DNMG150404, rhombic Double-sided with double-sided chipbreaker With hole: cylindrical hole Application: Turning (external and internal) Suitable for finishing, continuous cutting and small depths of cut Compatibility determined by form, clearance angle, tolerance class, clamp and thickness FAQ What advantages does the NS9530 grade offer over standard coated grades? The NS9530 uncoated cermet grade provides a sharp cutting edge and reduced cutting forces, making the DNMG150404 NS9530 particularly effective for finishing steel where surface quality and dimensional accuracy are priorities. Is this insert suitable for internal turning as well as external turning? Yes; the DNMG150404 geometry and the insert’s compact 0.4 mm nose radius allow use in both external and internal turning applications, provided a compatible ISO holder and secure clamping are used. How is the insert secured in the holder? The insert is double-sided and features a cylindrical hole for positive location and clamping; correct compatibility depends on matching form, clearance angle, tolerance class, clamp arrangement, size and thickness. For which machining conditions is this insert optimised? The DNMG150404 NS9530 is optimised for finishing cuts on steel, continuous cutting and small depths of cut where low cutting forces and excellent surface finish are required. Does the DNMG150404 NS9530 support economical indexing? Yes; being double-sided allows two cutting edges per index position, which helps reduce tooling costs and downtime for index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: the cutting material is indicated both as cemented carbide and as uncoated cermet; please check the specification to ensure accuracy and avoid potential confusion or errors in the manufacturing process, as this discrepancy could lead to incorrect assumptions about the material properties, performance, and suitability for specific applications, which might ultimately affect the quality, durability, and efficiency of the final product; it is essential to verify and clarify whether the cutting material is indeed cemented carbide, known for its hardness and wear resistance, or uncoated cermet, which offers different characteristics, to ensure that the correct material is used and all relevant documentation is updated accordingly.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com