DNMG 150404 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a double-sided chipbreaker for efficient, stable machining of cast iron; the rhombic geometry and 0.4 mm nose radius provide predictable tool life and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult our technical team for application advice. DNMG150404 T505 – Indexable turning insert for turning The DNMG150404 T505 is a rhombic, ISO‑compliant indexable insert designed for external and internal turning, especially suited to economical machining of cast iron. ISO‑compliant rhombic insert CVD‑coated carbide for cast iron Double‑sided chipbreaker Cylindrical hole for secure clamping Consistent results through stable cutting geometry The rhombic geometry with a 55° lead angle and 0.4 mm nose radius delivers a balance between strength and accessibility, enabling reliable finishing and medium‑machining passes. The CVD‑coated carbide substrate provides wear resistance at elevated cutting temperatures, which supports longer tool life and reduced changeover frequency. For production environments where repeatability matters, this geometry reduces vibration and maintains a uniform surface quality on grey and nodular cast iron components. Economical machining and process reliability The T505 grade combines a wear‑resistant coating with a carbide base to keep running costs low while retaining cutting edge stability. The double‑sided chipbreaker promotes predictable chip formation and evacuation, decreasing interruption from built‑up edge and lowering the risk of workpiece damage. Together, these characteristics enhance machining productivity and help to secure process windows where both power and finish are critical. Compatibility and secure clamping for shopfloor use As an ISO‑compliant insert with a cylindrical hole, compatibility with a wide range of indexable holders is defined by form, clearance angle and tolerance class; this facilitates fast integration into existing tool sets. The 4.76 mm thickness offers a robust seating surface and the through‑hole permits firm clamping for higher stability in interrupted cuts. Selection of a suitable holder and clamping kit ensures the full benefits of the insert’s design, especially when machining cast iron with variable stability. Contact Metav Werkzeuge to discuss the Tungaloy turning insert for efficient cast‑iron machining and to request the SKU TUN6831258 for ordering or technical consultation Technical Data Article number: 6831258 Manufacturer SKU: TUN6831258 SKU: 6831258-Tungaloy Designation: DNMG150404 T505 Tungaloy insert Model series: ISO indexable turning inserts Core specifications Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Lead angle: 55° Special features Material: carbide Coating: CVD Grade: T505 Geometry: rhombic, double‑sided chipbreaker Hole: cylindrical, with hole Application: external and internal turning, especially cast iron Compatibility: ISO‑compliant insert, fits matching external holders and boring bars FAQ What materials is this insert suitable for? The DNMG150404 T505 Tungaloy insert is optimised for machining cast iron; the T505 grade and CVD‑coated carbide offer wear resistance and stable cutting behaviour on grey and nodular cast iron. How does the chipbreaker affect performance? The double‑sided chipbreaker on this indexable insert promotes controlled chip formation and evacuation, which improves surface finish and reduces interruptions during turning with the DNMG150404 T505 Tungaloy insert (SKU 6831258-Tungaloy). Is the insert compatible with standard ISO holders? Yes. As an ISO‑compliant insert with a cylindrical hole, the DNMG150404 fits holders and boring bars specified for this ISO designation; compatibility is determined by form, clearance angle and tolerance class. What does the 0.4 mm nose radius mean for the finish? A 0.4 mm nose radius balances edge strength and surface quality, enabling consistent finishes on cast‑iron components while maintaining robustness for common turning operations. Which features help in interrupted cuts? The combination of carbide material, CVD coating and the cylindrical hole for secure clamping increases stability in interrupted cuts; the insert’s thickness and rhombic geometry also contribute to repeatable, reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and a precise 0.4 mm corner radius for consistent surface finish and longer tool life; order the insert directly via Metav Werkzeuge or consult our advisors for application support. DNMG150404 T5105 DNMG indexable insert for turning (CVD-coated carbide, 0.4 mm) — Tungaloy The DNMG150404 T5105 is an ISO rhombic indexable insert developed for high-speed, stable turning operations, particularly where reliable chip control and extended wear life are required. CVD-coated carbide for high wear resistance ISO compatibility for standard turning holders 0.4 mm corner radius for fine surface finishes Double-sided chipbreaker with cylindrical hole Increase productivity with reliable wear resistance The CVD-coated carbide grade T5105 delivers high wear resistance in sustained, high-speed turning. Under stable machining conditions this grade enables longer cutting cycles and reduced insert changes, which directly improves machine uptime and lowers per-part costs. The CVD-coated layer provides consistent performance when machining cast iron, ensuring predictable tool life and stable cutting forces for repetitive production runs. Precise geometry for consistent finishes and repeatability With a 0.4 mm corner radius, 55° geometry and a rhombic plate form, the insert is engineered for repeatable dimensional control and surface quality. The specified 4.76 mm plate thickness and the cylindrical centre hole ensure secure clamping in standard ISO holders; compatibility hinges on matching the holder form, clearance angle, tolerance class, fastening method, size and thickness. This dimensional clarity supports process standardisation and facilitates tool changeover. Chip control and application guidance for turning The double-sided chipbreaker design assists in controlled chip formation during both external and internal turning tasks. For most turning applications choose the chipbreaker and grade according to the material, machining strategy and machine stability: the T5105 grade is optimised for cast iron under stable conditions. Where interrupted cuts or unstable setups occur, select more robust holders and consider adjustments to feed and depth of cut to maintain chip flow and protect the cutting edge. Material and handling considerations explained The insert is manufactured from precision carbide and finished with a CVD coating to balance hardness and toughness for high-speed performance. The geometry includes a zero clearance rake angle and a centrally located cylindrical hole for secure mounting; this reduces the risk of movement under load and simplifies indexing between the two usable sides. For best results, pair the insert with a suitable ISO external holder or boring bar that matches the rhombic shape and thickness for optimal cutting stability. For application advice on the DNMG150404 T5105 Tungaloy indexable insert or to request a quote, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6852962 SKU: 6852962-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Data ISO designation: DNMG150404 Insert size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Approach angle: 55° Special features Coating: CVD-coated (T5105) Chipbreaker: double-sided Plate form: rhombic Hole: with hole, cylindrical hole Application: Turning Manufacturer SKU: TUN6852962 FAQ What materials is this insert best suited for? The DNMG150404 T5105 Tungaloy indexable insert is optimised for machining cast iron and provides reliable wear resistance under stable, high-speed turning conditions. How does the T5105 coating improve performance? The CVD-coated T5105 grade on this rhombic insert enhances surface hardness and wear resistance, extending tool life during sustained turning tasks in compatible materials. Which holders are compatible with this insert? Compatibility requires matching the rhombic form, 0° clearance, size, thickness and fastening method; the insert is ISO-standard and designed to fit standard ISO turning holders when those parameters align. Is the insert reversible and how does the hole affect mounting? This design is double-sided and reversible; the cylindrical centre hole ensures secure clamping and simplifies indexing between usable cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5105 Wendeplatten - Tungaloy
Optimise turning operations with the CVD-coated T5105 grade and a compact 0.4 mm corner radius for consistent surface finish and long tool life; compatibility with ISO holders ensures quick indexing and economical machining. Order directly via Metav Werkzeuge or consult the specialists for application advice. DNMG150404 150404 T5105 — DNMG turning indexable insert for turning, Tungaloy A DNMG150404 T5105 rhombic indexable insert designed for high-speed turning of cast iron with a CVD-coated carbide grade for improved wear resistance CVD-coated carbide T5105 for wear resistance 55° rhombic geometry for versatile turning 0.4 mm corner radius for fine surface finish Double-sided chipbreaker for stable chip control Greater process stability for high-speed cast-iron turning The combination of a CVD-coated carbide substrate and the T5105 grade delivers reliable wear resistance under elevated cutting speeds. The insert’s rhombic 55° geometry provides a balanced approach between strength and accessibility into turning operations, making it suitable for both external and internal cuts. Because the grade is formulated for stable conditions, the result is reduced flank wear over extended cycles and more predictable tool life, which supports improved productivity in repetitive machining tasks. Precise edge form and surface finish A 0.4 mm corner radius on this insert contributes to a refined edge that helps produce consistent surface finishes on cast-iron components. The modest radius reduces cutting forces compared with larger radii while still offering edge strength for finishing and light-medium roughing passes. The double-sided chipbreaker design aids controlled chip formation, lowering the risk of built-up edge and minimising surface defects, which is especially beneficial when machining complex contours or interrupted cuts. Compatibility and system advantages for efficient tooling These inserts follow the ISO turning insert standard, so compatibility with suitable holders is determined by form, relief angle, tolerance class, clamping method, size and thickness. The product’s 4.76 mm plate thickness and standard rhombic form simplify replacement and indexing workflows in conventional turning tool systems. The presence of a cylindrical hole facilitates secure clamping in many indexable-holder types, enabling quick changeovers and limiting downtime during production runs. Economic benefits and predictable performance Selecting a carbide insert with a CVD-coated surface and a dedicated grade for cast iron reduces the frequency of tool changes and supports steady cycle times. The predictable wear behaviour of the T5105 grade contributes to process reliability, helping to lower overall machining costs per part. For operations that value repeatable results and minimal setup variance, this insert offers a pragmatic balance between performance and cost-effectiveness. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy DNMG150404 T5105 insert or to confirm availability — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6850181 SKU: 6850181-Tungaloy Manufacturer SKU: TUN6850181 Model series: ISO-Drehwendeschneidplatten Dimensions & geometry Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Materials & features Material: carbide Grade / coating: T5105 (CVD-coated carbide) Shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert intended for? The Tungaloy DNMG150404 T5105 insert is optimised for high-speed machining of cast iron and performs well under stable cutting conditions. Is the geometry suitable for finishing operations? Yes; the 0.4 mm corner radius and rhombic 55° geometry make the insert well suited to fine finishing and light-medium roughing. How does the chipbreaker affect machining? The double-sided chipbreaker on the insert provides consistent chip control, improving surface quality and reducing the chance of built-up edge during turning. Can the insert be used in standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, clamping and size; the DNMG150404 conforms to ISO standards for indexable turning inserts and fits corresponding holders. What are the clamping / hole details? The plate is supplied with a cylindrical hole for positive clamping and straightforward mounting in compatible tool holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5105 Wendeplatten - Tungaloy
Take advantage of high-speed productivity and extended tool life thanks to the T5105 CVD coating and robust carbide substrate; order directly via Metav Werkzeuge or request application advice from our technical consultants. DNMG 150404 T5105 DNMG150404 turning insert — Tungaloy for high-speed cast-iron turning DNMG150404 T5105 is a rhombic, indexable turning insert designed for ISO-compatible external and internal turning in stable, high-speed machining of cast iron ISO rhombic insert DNMG150404 CVD-coated carbide T5105 for cast iron Double-sided chipbreaker with cylindrical hole 0° clearance angle for specific turning tasks Optimised carbide grade for productive cast-iron turning The T5105 grade is a CVD-coated carbide engineered for high-speed machining of cast iron under stable cutting conditions. The combination of a wear-resistant coating and a robust substrate reduces flank wear and extends service intervals, which translates directly into higher machine utilisation and fewer tool changes. In practice, this means more parts per shift and greater process stability. The hardened coating chemistry supports consistent edge integrity at elevated cutting speeds, enabling a balance between productivity and repeatable component quality. Precise ISO compatibility and secure clamping for repeatable results As an ISO-series indexable insert, the geometry and tolerance specifications determine holder compatibility: shape, clearance angle, tolerance class, attachment, size and thickness must match the tool holder. The rhombic form with a cylindrical hole provides reliable mechanical support and straightforward positioning in commonly used DNMG holders. The specified 0° clearance angle suits applications where minimal relief is required; combined with a 4.76 mm plate thickness, this offers excellent rigidity and resistance to vibration during axial cuts. Choosing the correct holder and fastening hardware ensures reproducible seating and consistent cutting performance. Operational benefits: economy, edge strength and consistent surface finish This double-sided insert offers two usable cutting edges per index, improving cost efficiency without compromising stability. The 0.4 mm corner radius provides an effective compromise between edge strength and surface finish: small enough for fine profiles yet sturdy enough to withstand interrupted cuts. The overall plate thickness and rhombic form contribute to low deflection and reliable surface quality on cast-iron components. The chipbreaker is designed for chip control in typical turning operations, helping to maintain coolant access and clear chips from the cutting zone, which supports process safety and operator convenience. For tailored recommendations on tooling setups with Tungaloy inserts, contact Metav Werkzeuge for application-specific guidance and ordering assistance Technical data Article number: 6850183 Manufacturer SKU: TUN6850183 SKU: 6850183-Tungaloy Facts Insert designation: DNMG150404 Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Material: carbide Coating: CVD (grade T5105) Plate form: rhombic Hole: cylindrical hole Chipbreaker: double-sided Application: turning, optimised for cast iron ISO-series: ISO turning inserts FAQ What materials is this insert best suited for? The DNMG150404 T5105 insert is optimised for high-speed machining of cast iron; its CVD-coated carbide composition supports consistent wear resistance in that application. How many cutting edges are available per insert? The insert is double-sided, providing two usable edges, which improves cost efficiency while maintaining a stable cutting edge for turning operations. Which holders are compatible with this insert? Compatibility depends on ISO form, clearance angle, tolerance class, attachment method, size and thickness; the rhombic DNMG150404 fits standard DNMG holders when these parameters match. What does the 0° clearance angle mean for machining? A 0° clearance angle reduces the relief behind the cutting edge and can be advantageous for specific turning tasks that require minimal tool overhang and enhanced support behind the edge. Is the chip control suitable for interrupted cuts? The double-sided chipbreaker is designed for effective chip control in typical turning operations; however, for highly interrupted cuts, review holder rigidity and cutting parameters to ensure edge protection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, broad cast-iron performance and simple ISO compatibility for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for selection advice. DNMG150404 T5115 Tungaloy turning insert — 55° rhombic, 0.4 mm radius A DNMG150404 T5115 indexable insert designed for external and internal turning, offering robust performance for cast iron machining. CVD-coated carbide T5115 for cast iron 55° rhombic geometry for versatile turning 0.4 mm corner radius for edge strength Double-sided chipbreaker, cylindrical hole High wear resistance and reliable edge stability for cast iron The DNMG150404 T5115 turning insert is a CVD-coated carbide grade formulated for consistent performance on cast iron. The grade balances wear resistance and edge toughness, reducing the frequency of insert changes and supporting longer tool life under interrupted cuts. The coating improves resistance to abrasive wear and thermal loading during heavy cuts, which helps maintain dimensional accuracy and surface quality. This translates into fewer tool changes, lower downtime and a measurable improvement in process efficiency when machining grey and nodular cast irons. Straightforward ISO integration and secure clamping for stable runs Compatibility with standard ISO holders is determined by insert form, relief angle, tolerance class, clamping method, size and thickness. The rhombic shape with a 55° included angle and a 0° relief makes the insert adaptable to common turning holders; the 4.76 mm plate thickness and 15 mm size provide a solid seating area while the cylindrical hole enables reliable fixation with standard screws and clamps. These characteristics support stable toolholding and predictable tool life. Selection of a matching holder and appropriate clamping torque ensures consistent chip control and repeatable results in both external and internal turning operations. Process stability, chip control and economical edge usage The double-sided chipbreaker design delivers controlled chip formation and allows indexation to use multiple cutting edges before disposal, improving cost-efficiency per edge. The 0.4 mm corner radius offers a compromise between strength and surface finish, suitable for medium to heavy finishing cuts where edge robustness is required. In practice, the insert contributes to improved productivity through longer intervals between tool changes and stable machining behaviour. For additional application data or material-specific recommendations, the Metav Werkzeuge technical team can provide machining guidance and comparative grade information by email or phone: info@metav-werkzeuge.com, +49 2822 7131930. Contact Metav Werkzeuge for expert advice on Tungaloy DNMG150404 T5115 inserts and assistance in selecting the optimal grade and holder for specific cast-iron turning applications Technical data Manufacturer article number: 6852963 SKU: 6852963-Tungaloy Manufacturer SKU: TUN6852963 Manufacturer: Tungaloy Core data Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Design & features CVD-coated carbide (T5115) Double-sided chipbreaker Rhombic plate form Cylindrical hole ISO turning insert series Application: external and internal turning FAQ What materials is this insert suitable for? The DNMG150404 T5115 insert is optimised for cast iron workpieces; the T5115 carbide grade provides a balanced combination of wear resistance and edge stability for grey and nodular cast irons. How does the insert mount in standard holders? Mounting relies on the rhombic form, the cylindrical hole and the standard clamping systems; compatibility with holders is determined by form, relief angle, tolerance class, clamping method, size and thickness, so matching to ISO holders is straightforward. How many usable edges are available on this insert? The double-sided chipbreaker allows indexing to additional cutting edges; the exact count depends on the insert orientation and the chosen seat in the toolholder, but the design supports economical edge usage before disposal. Which feature improves chip control during turning? The double-sided chipbreaker combined with the CVD-coated T5115 grade promotes controlled chip formation and evacuation, enhancing process stability in turning operations. What is the manufacturer SKU and who makes this insert? The insert is supplied by Tungaloy and is listed under SKU 6852963-Tungaloy; the manufacturer article number is 6852963. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5115 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide grade T5115 and the rhombic 55° geometry for reliable cast-iron turning; order the DNMG150404 T5115 insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG 150404 T5115 DNMG ISO turning insert — Tungaloy, CVD-coated carbide The DNMG150404 T5115 is an ISO-standard indexable turning insert designed for general turning, especially suited to cast-iron machining where a balanced combination of wear resistance and edge stability is required. CVD-coated carbide for durable performance Universal grade T5115 for cast iron machining Rhombic 55° geometry for versatile turning Two-sided chipbreaker with centring hole Consistent tool life through CVD-coated carbide The CVD-coated carbide matrix of the T5115 grade delivers a controlled combination of wear resistance and edge stability, which translates into predictable tool life and fewer unplanned tool changes. For shops focused on productivity, this balance reduces downtime and supports repeatable cycle times during both roughing and finishing operations. The coating assists heat resistance at elevated cutting temperatures typically encountered in cast-iron turning, so machining results remain consistent across series production. Geometry that supports precision and flexibility Built on a rhombic 55° geometry with a 0.4 mm corner radius, this insert enables both light finishing passes and medium-duty turning where dimensional control matters. The 0° clearance angle and the ISO-standard outline make it compatible with a wide range of holders and boring bars; compatibility to a specific toolholder is determined by form, clearance angle, tolerance class, mounting method, size and thickness. The small corner radius helps maintain accurate profiles and reduces vibration on less rigid set-ups, improving surface quality and process stability. Practical system integration and handling advantages The insert’s two-sided chipbreaker and centring hole support quick indexing and secure clamping, reducing fixture time and simplifying inventory management for rotating inserts. As part of a standard system — an ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws — the component is straightforward to fit and replace. Select the chipbreaker style and grade according to workpiece material and machining strategy to maximise service life and part quality; this approach helps avoid trial-and-error and fosters efficient, cost-effective production. Contact Metav Werkzeuge for availability and tailored advice on the DNMG150404 T5115 insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6850184 Manufacturer SKU: TUN6850184 Dealer SKU: 6850184-Tungaloy Designation: DNMG150404 T5115 Tungaloy insert Core dimensions Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Materials & features Material: carbide Grade/coating: T5115, CVD-coated carbide Chipbreaker: two-sided Hole: with cylindrical hole Plate form: rhombic, 55° ISO geometry Typical applications: external and internal turning FAQ Which materials is this insert best suited for? The T5115 grade is formulated as a universal sort primarily for cast iron; the DNMG150404 T5115 insert offers a balanced mix of wear resistance and edge stability suited to common cast-iron turning tasks. How is the insert secured in the toolholder? The DNMG150404 is retained via the centring hole and clamp system compatible with ISO-standard holders; correct holder selection depends on form, clearance angle, tolerance class, size and thickness. Can the insert be indexed to renew the cutting edge? Yes, the double-sided chipbreaker design allows indexing to present a fresh cutting edge, reducing the frequency of full insert replacements and supporting efficient tool usage. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius is well suited to producing controlled surface finishes in medium to light turning passes; combined with the rhombic geometry, it helps maintain profile accuracy and dampen minor vibration. Is this an ISO-standard insert and which holders are compatible? The insert follows ISO geometry for DNMG-style plates and is compatible with matching DNMG external holders and boring bars; ensure holder specifications align with the insert’s form, thickness and clearance angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated cemented carbide grade and the 0.4 mm corner radius for reliable cast‑iron turning and a stable cutting edge; benefit from the ISO compatibility for straightforward toolholder matching and order original inserts through Metav Werkzeuge or request application advice from our consultants. DNMG150404 T5115 DNMG turning insert for turning by Tungaloy — CVD‑coated carbide, 0.4 mm corner radius A DNMG150404 T5115 indexable turning insert designed for ISO‑standard external and internal turning, offering a universal grade optimised for cast iron with a rhombic form and cylindrical hole for secure clamping CVD‑coated cemented carbide T5115 Universal grade for cast iron Rhombic 55° geometry Double‑sided with cylindrical hole Precision, compatibility and what that means for productivity The CVD‑coated cemented carbide composition of this insert delivers a controlled balance between wear resistance and cutting‑edge stability, making it well suited to cast‑iron applications. As an ISO‑standard rhombic insert, the geometry (55°) and dimensions ensure predictable engagement with a matching holder; this compatibility reduces set‑up time and increases repeatability. For production environments where consistent surface finish and predictable tool life matter, the combination of the universal grade and standardised form supports steady machining cycles and fewer unexpected interruptions. Design details that reduce tooling cost and downtime With a 0.4 mm corner radius and a plate thickness of 4.76 mm, the insert provides a compromise between strength at the nose and the ability to take moderate depths of cut. The double‑sided design effectively doubles usable edges per insert, lowering per‑edge cost and simplifying inventory. The cylindrical hole and standard mounting style make clamping secure and straightforward; because compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, matching the insert to an appropriate holder ensures stable cutting conditions and extended tool life. Practical application guidance for milling down cycle time Intended primarily for turning operations, the insert excels in both external and internal turning of cast iron when paired with a holder and suitable chipbreaker. The T5115 grade is a universal choice that accommodates varied machining conditions—choose the chipbreaker and geometry to match workpiece stability and cutting mode. System setup normally comprises the ISO insert, a suitable external holder or boring bar, a backing shim or clamping set and replacement screws; correct assembly and parameter selection translate the insert’s material and geometry into measurable productivity gains and reliable surface quality. For application support or to secure original Tungaloy inserts, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6850187 SKU: 6850187-Tungaloy Manufacturer SKU: TUN6850187 Article designation: DNMG150404 Article name: DNMG150404 T5115 Tungaloy insert Material: cemented carbide Grade: T5115 Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Lead/approach angle: 55° Clearance angle: 0° Mounting: with cylindrical hole Special features Rhombic plate shape Double‑sided chipbreaker Cylindrical mounting hole CVD coating on cemented carbide Universal use for cast iron ISO‑compatible turning insert Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ Is this insert suitable for machining cast iron? Yes. The DNMG150404 T5115 turning insert is a universal grade optimised for cast iron, providing a balanced combination of wear resistance and edge stability for consistent results. Can the insert be used for internal and external turning? Yes. The geometry and ISO‑standard dimensions allow use in both external and internal turning when the correct holder and mounting are selected. How many cutting edges are available per insert? The DNMG150404 is double‑sided, offering multiple usable edges and therefore lowering the cost per cutting edge in serial production. What does the T5115 designation indicate? T5115 denotes a CVD‑coated cemented‑carbide grade formulated for broad cast‑iron applications, optimising process security and tool life under varying cutting conditions. Which toolholder features ensure proper compatibility? Compatibility depends on matching the insert’s form, clearance angle, tolerance class, fastening method, size and thickness to the holder; the cylindrical hole and rhombic form simplify secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, 0.4 mm corner radius for precise finishes, and ISO compatibility for a reliable turning process; order the DNMG150404 T5115 indexable insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG 150404 T5115 indexable insert for turning by Tungaloy — CVD-coated carbide, 55° rhombic geometry DNMG150404 T5115 is an ISO-designation indexable insert intended for external and internal turning, optimised for cast iron machining and compatible with standard ISO toolholders CVD-coated carbide grade T5115 Rhombic 55° geometry, 0.4 mm corner radius Double-sided chipbreaker, cylindrical hole Increased efficiency when machining cast iron components The CVD-coated carbide formulation of this insert delivers a balanced combination of wear resistance and edge stability, making it well suited to a broad range of grey and nodular cast iron applications. The T5115 grade is designed as a universal choice for cast iron, offering predictable tool life and consistent surface quality under typical turning conditions. The chemical vapour deposition (CVD) layer provides a hard, thermally stable barrier that reduces flank wear; in practice this translates to fewer indexings and lower tooling costs per component while maintaining dimensional accuracy. Precise geometry for repeatable finishes and secure clamping A 55° rhombic geometry with a 0.4 mm corner radius gives a compromise between strength and edge definition, supporting fine form work as well as medium machining passes. The insert is produced as a double-sided component with a cylindrical hole for positive location in standard clamping systems, enabling rapid and repeatable tool changes. The zero-degree relief angle promotes consistent contact conditions and stable cutting forces, which benefits cycle-time predictability and reduces the need for excessive machine adjustments. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness — all in accordance with ISO norms. System approach and selection guidance for productive turning An efficient turning setup relies on the insert, a matched external holder or boring bar, a shim/clamping set and spare screws for uninterrupted operation. The indexable insert fits into this system and is intended to be paired with a holder selected for rigidity and support; the appropriate chipbreaker and grade should be chosen based on workpiece material, machining strategy and machine-tool stability. For less experienced planners, selecting a double-sided chipbreaker helps maintain chip control during interrupted cuts, while the universal T5115 grade provides a pragmatic starting point for many cast iron turning tasks. When a higher edge stability or extended life is required, consider consultation on alternative grades or coatings tailored to the process. Contact Metav Werkzeuge for personalised selection advice or to arrange supply of Tungaloy turning inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application details and compatibility Technical data Article number: 6850182 Manufacturer SKU: TUN6850182 SKU: 6850182-Tungaloy Model series: ISO turning indexable inserts Facts ISO designation: DNMG150404 Cutting angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Special features CVD-coated carbide Grade: T5115 – universal for cast iron Rhombic plate form Double-sided chipbreaker Cylindrical locating hole Free clearance angle: 0° Application: turning (external and internal) System components: insert, matched external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert suitable for? The DNMG150404 T5115 indexable insert is formulated primarily for cast iron machining; the T5115 grade offers a broad material coverage with an emphasis on wear resistance and edge stability in grey and nodular cast iron. How does the CVD coating affect tool life? The CVD-coated carbide surface on the DNMG150404 reduces flank wear and improves thermal resistance, which typically results in longer service intervals and more consistent surface finish when compared with uncoated grades under similar cutting conditions. How is the insert mounted and indexed? The insert uses a cylindrical hole and fits standard ISO-compatible clamping systems; as a double-sided component it can be indexed to present a fresh cutting edge, reducing downtime and tooling cost per part. Is the geometry suitable for finishing passes? The 55° rhombic geometry with a 0.4 mm corner radius provides a balanced option for finishing and medium cuts, offering both edge strength and the ability to achieve precise surface quality on turned components. Which components are required for a complete tooling system? A complete system comprises the indexable insert itself plus a compatible external holder or boring bar, a shim or clamping set and replacement screws; these elements ensure correct seating, rigidity and repeatable positioning for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T5125 grade and a 0.4 mm nose radius for reliable performance in interrupted turning of cast iron; the robust rhombic geometry and ISO compatibility support quick indexability and reduced downtime. Order the DNMG150404 T5125 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 T5125 – Tungaloy turning insert, CVD-coated carbide, rhombic 55° for turning The DNMG150404 T5125 is a CVD-coated cemented carbide turning insert designed for external and internal turning, especially where interrupted cuts and less stable conditions occur. CVD-coated carbide grade T5125 Optimised for cast iron in interrupted cuts Rhombic insert, 55° lead angle, 0.4 mm radius Double-sided with cylindrical hole, thickness 4.76 mm Stable cutting in interrupted turning with a tough coating The CVD-coated T5125 grade combines enhanced toughness with wear resistance, which is particularly beneficial when machining cast iron under interrupted cutting conditions. The coating reduces flank wear while the substrate supports the cutting edge against mechanical shock, resulting in longer tool life and fewer indexings. This balance between hardness and toughness helps maintain consistent cutting forces, which in turn supports stable spindle loads and predictable cycle times. Reliable fit and fast indexability for ISO systems Thanks to the ISO-conforming rhombic geometry and standardized form, the insert ensures straightforward compatibility with a wide range of holders when the form, clearance angle, tolerance class, fixing method, size and thickness are matched. The cylindrical hole and double-sided design offer fast and repeatable indexing, reducing machine downtime and simplifying inventory management. For production environments, these factors translate into smoother tool changes and improved process uptime. Controlled chip formation and repeatable surface quality The small 0.4 mm nose radius delivers a compromise between cutting-edge strength and surface finish, enabling reliable dimensional control during turning operations. The double-sided chipbreaker configuration supports better chip control in interrupted cuts, reducing the risk of tangling or secondary operations to clear chips. Together with the coating’s wear resistance, this delivers a predictable surface quality and fewer unexpected tool interventions, which benefits both batch production and mixed-series machining. For reliable turning performance with Tungaloy’s T5125 grade, contact Metav Werkzeuge for availability and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6850185 Manufacturer SKU: TUN6850185 Model series: ISO turning inserts Material: Cemented carbide Grade / Coating: T5125 (CVD-coated) Manufacturer: Tungaloy Core dimensions Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Features & suitability Rhombic insert geometry Double-sided chipbreaker ISO format DNMG150404 Suitable for turning (external and internal) Optimised for cast iron and interrupted cuts Compatibility determined by form, clearance angle, tolerance, fixing, size and thickness FAQ What materials is this insert suitable for? The DNMG150404 T5125 insert is optimised for machining cast iron, especially under interrupted cutting conditions, owing to its tougher CVD-coated cemented carbide grade. Is the insert indexable and reversible? Yes, the insert is double-sided with a cylindrical hole, allowing indexable reversals to present a fresh cutting edge and extend usable life. How does the 0.4 mm nose radius affect machining? A 0.4 mm nose radius provides a balance between edge strength and surface finish, offering dimensional stability while maintaining acceptable surface quality during turning. Which holders are compatible with this ISO insert? Compatibility follows ISO standards for DNMG inserts; the matching holder must correspond in form, clearance angle, tolerance class, fixing method, size and thickness to ensure secure clamping and correct geometry. Is this grade suitable for finishing passes? The T5125 grade is designed for robust performance in interrupted cuts and less stable conditions; for fine finishing passes, a grade optimised for smooth continuous cuts may provide superior surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a rhombic 55° cutting geometry and a precise 0.4 mm corner radius to improve stability and surface finish in turning operations. Order the DNMG150404 T5125 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 T5125 — Turning indexable insert, CVD-coated carbide, 55° (Tungaloy) The DNMG150404 T5125 is an ISO-format indexable turning insert designed for external and internal turning; its tougher CVD-coated grade is intended for cast iron and interrupted cuts. CVD-coated carbide grade T5125 Rhombic insert with 55° cutting angle 0.4 mm corner radius for accurate contours Double-sided chipbreaker and cylindrical hole Stable cutting performance for demanding turning tasks The combination of a CVD-coated surface and a carbide substrate provides a balance between toughness and wear resistance that suits interrupted cuts and less rigid set-ups. The chosen grade, T5125, is formulated to tolerate impact during irregular engagement, which reduces unexpected tool failures and extends service intervals. In practice, this means more consistent component quality and fewer stoppages, contributing directly to process efficiency and predictable cycle times. Secure seating and broad holder compatibility for reliable set-up Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fixation, size and thickness; the rhombic geometry and 55° lead angle ensure a stable contact point in both external and internal turning applications. The insert is furnished with a cylindrical hole, allowing positive clamping and simple locating in standard ISO external holders or boring bars. Clear specification of dimensions and tolerances simplifies holder selection and reduces set-up time, supporting repeatable production runs. Practical chip control and finishing for improved surface quality A double-sided chipbreaker paired with a 0.4 mm radius produces controllable chip formation and a consistent cutting edge for fine contours and finishing passes. The double-sided design effectively offers two usable edges per index, optimising tool use and lowering tooling cost per component. Where high surface quality and dimensional stability are required, selecting the appropriate chipbreaker and the T5125 grade helps to maintain edge integrity and minimise built-up edge during intermittent cutting. Choose the Tungaloy DNMG150404 T5125 insert for applications that demand impact resistance and consistent chip control; contact Metav Werkzeuge for specification matching and procurement assistance. Technical data Article number: 6852964 SKU: 6852964-Tungaloy Manufacturer SKU: TUN6852964 Model series: ISO turning indexable inserts Material: carbide Facts Size: 15 mm Thickness: 4.76 mm Clearance angle: 0° Cutting angle: 55° Corner radius: 0.4 mm ISO designation: 150404 Special features Grade: T5125 (CVD-coated hardmetal) Chipbreaker: double-sided Plate form: rhombic Hole: with cylindrical hole Application: turning (external and internal) FAQ What materials is this insert best suited for? The DNMG150404 T5125 insert is optimised for cast iron applications and performs well in interrupted cuts or less stable machining conditions due to its tougher T5125 CVD-coated carbide grade. Which toolholders are compatible with this insert? Compatibility is governed by form, clearance angle, tolerance class, fixation, size and thickness; the rhombic shape and cylindrical hole of the DNMG150404 permit use in standard ISO external holders and boring bars designed for 55° inserts. Is the insert indexable and how many cutting edges are usable? Yes — the insert is double-sided with a double-sided chipbreaker, offering two usable cutting edges per index, which enhances economy and reduces changeover frequency. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm radius provides a compromise between a fine contour for finishing and sufficient edge strength for interrupted or less stable turning operations, improving surface quality while maintaining reliable edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T5125 Wendeplatten - Tungaloy
Take advantage of a combination of robust cutting performance and predictable tool life thanks to the CVD-coated carbide grade and a double-sided chipbreaker, both optimised for interrupted cuts in cast iron; the ISO-conformity and rhombic 55° geometry ensure reliable holder compatibility and secure clamping. Order the DNMG150404 T5125 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 T5125 DNMG turning insert – Tungaloy, CVD-coated carbide, 55° The DNMG150404 T5125 is an ISO-standard rhombic indexable insert for external and internal turning, designed for interrupted cuts in cast iron and less stable machining conditions. ISO-standard rhombic turning insert CVD-coated carbide for robust cutting Double-sided chipbreaker for cost efficiency Cylindrical-hole, 55° geometry for stable clamping Consistent performance for interrupted cast-iron machining The combination of a CVD-coated carbide substrate and the T5125 grade delivers a balance of toughness and wear resistance that is especially suited to interrupted cutting conditions. The coating supports surface integrity while the substrate resists chipping when cutting cast iron; this reduces unexpected tool failures and extends in-process intervals. As a result, the insert provides a measurable improvement in process stability and fewer tool changes, which supports uninterrupted production runs and predictable machining cycles. Secure fit and straightforward integration into ISO systems With its rhombic 55° geometry and a cylindrical locating hole, this insert is compatible with common ISO turning holders when matched for form, relief angle and tolerance class. The 15 mm inscribed circle and 4.76 mm thickness ensure a solid seat in the toolholder, while the 0.4 mm corner radius gives a compromise between edge strength and surface finish. The double-sided design allows rotation to a fresh cutting edge, improving cost efficiency by doubling the available edge life compared with single-sided alternatives. Chip control and economic machining benefits The double-sided chipbreaker is engineered to manage chips consistently in cast-iron applications, reducing re-cutting and improving surface quality. The grade’s toughness helps absorb the shocks of interrupted cuts, decreasing the likelihood of edge breakage and downtime. Explained simply, the CVD coating forms a thin, hard layer that reduces abrasive wear, while the tougher substrate beneath resists mechanical impact — together delivering longer life and lower total machining cost per component without sacrificing component quality. Request the Tungaloy DNMG150404 T5125 insert via Metav Werkzeuge for application advice and expedited delivery; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850188 Manufacturer article number: 6850188 SKU: 6850188-Tungaloy Manufacturer SKU: TUN6850188 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Core specifications Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 55° Relief angle: 0° Design and special features Material: carbide Coating: CVD Grade: T5125 Plate form: rhombic Hole: cylindrical Chipbreaker: double-sided Suitable for cast-iron interrupted cuts For external and internal turning FAQ What materials is this insert suitable for? The DNMG150404 T5125 insert is specified for cast iron applications and performs well in interrupted cuts; the CVD coating and tougher grade support machining in less stable conditions. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions for DNMG 150404 geometry and fits holders that accept rhombic 55° inserts with a cylindrical locating hole when the holder matches the listed thickness and tolerance class. How does the T5125 grade affect tool life? The T5125 grade combines a tough substrate with a CVD coating to resist chipping during interrupted cuts, which typically extends usable edge life and reduces the frequency of tool changes. Can the insert be rotated or indexed? The insert is double-sided, allowing rotation to a fresh cutting edge; this effectively doubles the available edges and increases cost efficiency for batch production. What chip control can be expected with this insert? The double-sided chipbreaker is designed to produce controlled chip formation in cast iron turning, supporting better surface finish and safer swarf handling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T515 Wendeplatten - Tungaloy
Combine CVD-coated carbide T515 with ISO-compliant DNMG150404 geometry for economical, reliable cast-iron turning; the insert’s double-sided chipbreaker and robust design ensure stable chip formation and long tool life. Order directly via Metav Werkzeuge or consult their specialists for holder compatibility and fast supply. DNMG150404 T515 indexable insert — Turning by Tungaloy The DNMG150404 T515 is an ISO-standard rhombic indexable insert for external and internal turning, optimised for economical machining of cast iron. ISO rhombic insert DNMG150404 CVD-coated carbide grade T515 Optimised for economical cast iron machining Double-sided chipbreaker with cylindrical hole Efficient cutting and measurable productivity gains The combination of CVD-coated carbide and the T515 grade delivers wear-resistant cutting performance suited to production environments where material removal and tool life must be balanced. The rhombic geometry with a 55° cutting angle provides stability in both external and internal turning operations, while the 0.4 mm corner radius supports a controlled transition between roughing and finishing passes. Selecting the appropriate chipbreaker and grade enables reliable chip control during steady cuts and moderate interruptions, improving uptime and lowering tool-change frequency in the long run. Practical selection and holder compatibility for trouble-free setup Compatibility with a chosen holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; this insert features a cylindrical hole and standard dimensions to suit many ISO external holders and boring bars. The 4.76 mm plate thickness and 15 mm inscribed circle are metrics to check against a clamping set or seat; matching these values ensures secure seating and repeatable cutting geometry. Guidance from technical specialists can simplify matching the insert to available toolholders and clamping kits. Better process behaviour and handling on the shop floor The double-sided chipbreaker design allows economical use of both cutting edges and supports consistent chip formation, which reduces rework and cycle-time variability. With its rhombic shape and central hole, the insert is straightforward to index and reclamp, shortening maintenance tasks and keeping operators focused on production. For workshops handling mixed batches, the insert’s predictable behaviour under stable cutting conditions contributes to smoother process control and fewer interruptions. Coating and material benefits for cast-iron applications The carbide substrate combined with a CVD coating yields a balance of toughness and wear resistance appropriate for grey and ductile cast iron. The T515 grade is engineered for economic machining of cast iron, offering reliable edge life when cutting speeds and stability match the workpiece and setup. For less experienced users, the grade and chipbreaker pairing simplify parameter selection: prioritise stability and conservative feeds for interrupted cuts, and the coating will help maintain edge integrity over longer tool life. For reliable, cost-efficient cast-iron turning choose Tungaloy DNMG150404 T515 inserts and contact Metav Werkzeuge for tailored holder recommendations and rapid supply Technical data Article number: 6779841 Manufacturer SKU: TUN6779841 Model series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.4 mm Cutting edge angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Inscribed circle / plate size: 15 mm Special features Grade: T515 (CVD-coated carbide) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided ISO designation: DNMG150404 Application: turning FAQ What materials is this insert suited for? The DNMG150404 T515 insert is intended primarily for economical machining of cast iron and is designed to provide stable chip formation with such materials. How does the T515 coating improve performance? The CVD-coated carbide T515 combination enhances wear resistance and edge life under appropriate cutting conditions, supporting longer intervals between indexings and replacements. What must be checked for holder compatibility? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder accepts a DNMG150404 rhombic insert with a cylindrical hole and 4.76 mm thickness. Can the insert be indexed to use both sides? Yes, the insert is double-sided with a chipbreaker on each side, allowing both cutting edges to be used before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T515 Wendeplatten - Tungaloy
The combination of an ISO‑standard DNMG geometry, a CVD‑coated T515 carbide grade and a compact 0.4 mm corner radius delivers economical, repeatable machining of cast iron while preserving tool life; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DNMG 150404 T515 Tungaloy indexable turning insert – CVD‑coated carbide for cast iron, 55° rhombic DNMG150404 T515 is an ISO‑compatible indexable insert designed for external and internal turning in industrial machining applications, optimised for the economical machining of cast iron. CVD‑coated carbide grade T515 Engineered for cast iron machining ISO DNMG 150404 rhombic 55° geometry Double‑sided insert with cylindrical hole 0.4 mm corner radius, 4.76 mm thickness Predictable performance and lower machining costs The CVD‑coated carbide designation T515 provides a balance of wear resistance and toughness that suits the economic removal of cast iron components. The coating reduces flank wear and extends usable edge life, which translates into fewer indexings and lower tooling expenditure per component. Consistent edge behaviour reduces unplanned downtime and helps maintain a steady production throughput, supporting measurable productivity improvements. Geometry that supports versatile turning and secure clamping The rhombic DNMG form with a 55° lead angle offers versatility for both external and internal operations, while the insert’s 0° relief and 0.4 mm corner radius deliver a defined cutting edge for medium‑finish turning. The double‑sided design and cylindrical locating hole provide two usable edges per side and reliable seating in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. This makes tool changes predictable and economical in assembly lines or toolrooms. Improved chip control and surface quality A double‑sided chipbreaker combined with the T515 grade facilitates stable chip formation when machining grey and nodular cast irons; the chipformer geometry reduces entanglement and assists coolant flow near the cutting zone. Stable chips and reduced built‑up edge contribute to a more consistent surface finish, lowering downstream processes such as manual deburring or polishing. For interrupted cuts, the grade’s toughness mitigates chipping when the machining setup provides sufficient rigidity. System integration and shopfloor benefits The insert is intended to be used as part of a system: indexable insert, compatible external holder or boring bar, shim/clamp set and replacement screws. This modular approach enables fast replacement, straightforward inventory control and predictable process behaviour across different machines. Clear part standardisation simplifies procurement and tooling strategies, supporting lean manufacturing goals and easier qualification for batch production. For reliable cast iron turning with Tungaloy’s T515 grade, contact Metav Werkzeuge for tailored recommendations or to order the DNMG150404 indexable insert. Technical Data Article number: 6760645 Manufacturer SKU: TUN6760645 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Grade/coating: T515 (CVD‑coated) Product name: DNMG150404 T515 Tungaloy indexable insert Facts Geometry: DNMG (rhombic), 55° Corner radius: 0.4 mm Relief angle: 0° Thickness: 4.76 mm Size: 15 mm Hole: with cylindrical hole Special features Double‑sided chipbreaker Intended application: Turning Typical system build: insert + outer holder/boring bar + shim/clamp set + screws Designed for economical machining of cast iron FAQ What materials is this insert suitable for machining? The DNMG150404 T515 insert is formulated for the economical machining of cast iron; the T515 CVD‑coated carbide grade provides wear resistance and toughness for grey and nodular cast irons. How many usable edges does the insert provide? The rhombic DNMG geometry with double‑sided chipbreaker supplies multiple usable cutting edges; the design allows indexing to present a fresh edge when required. Which holder types are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the insert is intended for ISO‑compatible turning holders and boring bars. Is the insert suitable for interrupted cuts? Yes—when the machining setup offers sufficient stability, the T515 grade’s toughness supports interrupted cutting, reducing the risk of edge chipping. What advantages does the T515 CVD coating bring? The CVD coating on the T515 grade enhances wear resistance and heat protection, extending edge life and promoting consistent surface finish in cast iron turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T515 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade (T515) and a double-sided chipbreaker delivers cost-effective, productive turning of cast iron while maintaining consistent edge life; compatibility with holders depends on form, clearance angle, tolerance class, attachment, size and thickness. Order genuine Tungaloy inserts via Metav Werkzeuge or contact our application consultants for specific machining recommendations. DNMG 150404 T515 DNMG Turning Insert — CVD-coated carbide for cast iron — Tungaloy The DNMG150404 T515 is a rhombic ISO turning insert optimised for economical machining of cast iron, featuring a double-sided chipbreaker and a cylindrical hole for secure clamping. Rhombic ISO geometry with 55° lead angle CVD-coated carbide for cast iron machining Double-sided chipbreaker for reliable chip control Cylindrical-hole design and 0.4 mm corner radius Economical, high-speed machining of cast iron with predictable tool life The CVD-coated carbide grade T515 is engineered for productive machining of cast iron, offering a balance between wear resistance and cost-efficiency. A chemical vapour deposition layer increases thermal stability and reduces flank wear during continuous cutting, which enables higher cutting speeds and longer intervals between indexings. In production contexts where cycle time and repeatability matter, this coating supports a stable process window and reduces overall tooling consumption. The result is more consistent component quality with lower running costs when processing grey and nodular cast irons. Consistent chip control and secure clamping reduce downtime The double-sided chipbreaker integrated into the insert geometry aids controlled chip formation across a range of depths of cut and feed rates, improving evacuation in both continuous and semi-interrupted cuts. The rhombic shape combined with a 0.4 mm corner radius offers a compromise between edge strength and surface finish, making the insert suitable for finishing and medium-duty turning. The cylindrical hole and ISO mounting form ensure positive location in the toolholder; when used with the correct shim and screw, the assembly delivers repeatable clamping force and minimal vibration, which together reduce edge chipping and unplanned tool changes. Seamless integration into ISO turning systems for reliable production Designed as part of the ISO turning inserts family, the DNMG format provides straightforward compatibility with standard holders when dimensions and tolerance classes match. Key dimensions — 15 mm size, 4.76 mm thickness, 55° lead angle and 0° clearance angle — determine suitability for a given toolholder. System components typically include the insert, a matching external holder or boring bar, an underlay or clamp set, and replacement screws. Selection of the correct chipbreaker variant and grade should be based on component stability, the presence of interrupted cuts and the desired cutting speed; the grade T515 is recommended for economical, high-throughput cast iron applications. Contact Metav Werkzeuge for tailored application advice and to order genuine Tungaloy DNMG 150404 T515 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6764415 SKU: 6764415-Tungaloy Manufacturer SKU: TUN6764415 Model series: ISO turning inserts Facts Insert designation: DNMG150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle: 0° Hole: cylindrical hole Double-sided: yes Special features Coating / grade: T515 (CVD-coated carbide) Material: carbide Shape: rhombic Chipbreaker: double-sided Application: turning; designed for cast iron machining System compatibility: ISO-indexable turning insert; compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness FAQ Which materials is this insert best suited for? The T515 grade is optimised for machining cast iron; the DNMG150404 geometry offers good performance on grey and nodular cast irons in both continuous and semi-interrupted cuts. What are the key geometric features to note? The insert is rhombic with a 55° lead angle, 0.4 mm corner radius, 15 mm size and 4.76 mm thickness, and it comes with a cylindrical hole for secure clamping. How does the chipbreaker influence performance? The double-sided chipbreaker provides consistent chip control across feeds and depths of cut, improving evacuation and helping to maintain surface quality while reducing the risk of chip entanglement. How is holder compatibility ensured? Compatibility for an ISO insert depends on matching the holder by form, clearance angle, tolerance class, attachment method, size and thickness; select holders that correspond to the DNMG form and tolerance for correct seating. What are the ordering and identification details? This article is listed as SKU 6764415-Tungaloy with manufacturer SKU TUN6764415 and article number 6764415, manufactured by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade T6215, ISO interchangeability and a 0.4 mm nose radius for stable, accurate turning of stainless steels; order directly via Metav Werkzeuge or request advisory support from our consultants. DNMG150404 T6215 — Turning indexable insert by Tungaloy (CVD‑coated carbide, 0° clearance) DNMG150404 T6215 is a compact ISO‑format turning insert for external and internal turning operations, optimised for stainless steels under stable to lightly interrupted cutting conditions. ISO DNMG150404 format for standard holders CVD‑coated carbide grade T6215 for stainless steel 0.4 mm nose radius for precise profile control Double‑sided chipbreaker, cylindrical‑hole design High‑performance grade for stainless steel turning The CVD‑coated carbide grade T6215 is engineered for wear resistance and reliable life when machining stainless steels, offering a balanced combination of toughness and hardness. The chemical vapour deposition (CVD) coating enhances resistance to abrasive wear and built‑up edge formation; this translates into longer tool life and more consistent component surfaces. For production environments where repeatability and predictable reconditioning intervals matter, the coated grade reduces downtime and supports steady output rates while maintaining dimensional stability. Precision geometry for accurate profiles and repeatable results The rhombic geometry in the ISO DNMG150404 outline, together with a 55° major cutting angle and 0° clearance, produces a predictable cutting direction and positive chip flow for many turning tasks. The 0.4 mm nose radius delivers tight profile control for finishing passes and reliable corner strength during roughing, while the double‑sided chipbreaker assists in managing small chips and surface integrity. The insert thickness of 4.76 mm and the 15 mm nominal size ensure compatible seating in standard DNMG holders; compatibility to the respective holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. Process reliability and application guidance Designed for external and internal turning, the insert performs best in stable to lightly interrupted cuts; the T6215 grade accepts moderate cutting forces while preserving edge integrity. Selection of the chipbreaker style should match the workpiece stability, feed and depth of cut to control chip shape and evacuation. The system approach — insert, appropriate outside holder or boring bar, backing shim/clamp set and replacement screws — ensures secure clamping and repeatable indexability. When machining less stable setups, consider a coarser chipbreaker or modified cutting parameters to avoid vibration and to extend insert life. Economic advantages and order references Standardised ISO fitment enables fast insert changes and straightforward stocking across multiple machines, supporting efficient tool management and lower inventory complexity. Consistent edge behaviour from the coated grade helps achieve repeatable surface finishes and reduces the frequency of re‑grinding or replacement. Relevant identifiers for procurement are manufacturer article number 6875524 and SKU TUN6875524, which facilitate quick checks against master data and ensure the correct original Tungaloy item is supplied. Contact Metav Werkzeuge for availability of the Tungaloy DNMG150404 T6215 insert and for tailored recommendations on chipbreaker selection and holder pairing — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6875524 Manufacturer SKU: TUN6875524 SKU: 6875524-Tungaloy Model series: ISO turning indexable inserts Material: carbide Numbers / Facts Radius: 0.4 mm Thickness: 4.76 mm Size: 15 mm Angle: 55° Clearance angle: 0° Special features Coating: CVD‑coated carbide (grade T6215) Chipbreaker: double‑sided Hole: with hole, cylindrical hole style Plate form: rhombic Application: turning (external and internal) System components: insert, holder/boring bar, backing shim/clamp set, replacement screws FAQ Which materials is this insert designed for? The DNMG150404 T6215 insert is formulated primarily for machining stainless steels; the T6215 grade and CVD coating focus on wear resistance and controlled chip formation when turning rostfreier Stahl under stable to lightly interrupted conditions. What is the meaning of the ISO designation DNMG150404? The ISO DNMG150404 code describes the rhombic insert shape, the 15 mm size and the 0.4 mm nose radius; these standard dimensions ensure interchangeability with holders that accept the DNMG format. Is the insert reversible and how many cutting edges are available per insert? The insert is double‑sided with a chipbreaker on each cutting edge, allowing indexable reversal to extend usable life and maintain consistent cutting geometry throughout multiple indexings. Which holders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness; use holders designed for the ISO DNMG150404 format and check that the 4.76 mm thickness and cylindrical hole type match the clamping system. How should the chipbreaker be chosen for different turning tasks? Select the chipbreaker based on workpiece material, rigidity of the setup and desired surface finish; the double‑sided chipbreaker on this insert suits a broad range of conditions, but more aggressive chip control may be required for unstable set‑ups or heavy interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Benefit from consistent chip control, extended tool life and simple holder compatibility checks for uninterrupted turning operations; order directly via Metav Werkzeuge or contact our consultants for application support. DNMG 150404 T6215 — DNMG150404 Tungaloy turning insert for turning A DNMG150404 T6215 rhombic turning insert engineered for reliable machining of stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for stainless steel machining Rhombic 55° insert with 0.4 mm radius Double-sided chipbreaker, cylindrical hole Productivity gains through stable cutting and tool life The CVD-coated T6215 carbide combines wear resistance with predictable performance to deliver a measurable increase in uptime during turning tasks. In practice, the coating reduces flank wear and helps maintain cutting-edge geometry, so the insert sustains cutting performance over longer tool cycles. For manufacturers working with stainless steel, this means fewer indexings, lower tool-change frequency and more consistent component quality — a rational improvement that supports tighter production schedules and reduced unit costs. Precise geometry for repeatable surface finishes The rhombic 55° geometry and 0.4 mm corner radius produce a stable cutting engagement that favours controlled chip formation and dimensional accuracy. The geometry is well suited to both external and internal turning where a balance between strength and accessibility is required. Because the insert is ISO-conforming, it integrates into standard toolholder systems when form, clearance, tolerance class, fixing and thickness match, enabling fast tool changeovers and repeatable results on the shop floor. Chip control and process stability under real conditions Equipped with a double-sided chipbreaker and a cylindrical hole for secure clamping, the insert helps channel chips away from the cutting zone and reduces the risk of built-up edge in interrupted cuts. Stable chip evacuation directly contributes to surface integrity and reduces thermal peaks at the cutting edge. Selecting the correct chipbreaker and matching the grade to material and cutting style leads to improved cycle reliability and predictable output — a tangible benefit for batch and job-shop environments. Compatibility and selection guidance for efficient integration The insert forms part of an ISO insert system that requires a compatible external holder or boring bar, clamping set and replacement screws. Compatibility is determined by insert form, 0° clearance angle, tolerance class, fixing method, size (15 mm) and thickness (4.76 mm). When these parameters align with the toolholder, the result is a rigid assembly that supports higher cutting feeds and steady finishes. For best results in turning, choose the chipbreaker and grade according to workpiece stability and the specific stainless steel grade being machined. For application-specific advice on Tungaloy turning inserts or to request matched holders and clamping solutions, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technicians will advise on the optimal setup for your process. Technical Data Article number: 6944626-Tungaloy Manufacturer SKU: TUN6944626 Manufacturer article number: 6944626 Model series: ISO turning inserts Facts ISO designation: 150404 Insert type: DNMG Plate size: 15 mm Thickness: 4.76 mm Angle: 55° Corner radius: 0.4 mm Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD-coated Grade: T6215 Chipbreaker: double-sided Shape: rhombic Typical application: turning (external and internal) Compatibility notes: determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The Tungaloy DNMG150404 T6215 insert is optimised for stainless steel machining; the CVD-coated carbide grade is selected for wear resistance under stable to slightly interrupted conditions. How does the chipbreaker affect performance? The double-sided chipbreaker on the DNMG insert promotes controlled chip formation and evacuation, improving process stability and surface finish during turning with the T6215 grade. What holder features are required for correct fit? Correct integration requires a holder matching the DNMG form, 55° geometry, 15 mm size and 4.76 mm thickness; clamping style and tolerance class also determine secure assembly. Can this insert be used for internal turning? Yes — the rhombic 55° form and secure cylindrical-hole clamping make the insert suitable for both external and internal turning applications when holder clearance allows. How many times can the insert be indexed? The DNMG insert is double-sided, allowing two cutting edges per side; actual indexings depend on cutting conditions and wear progression with the T6215 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and precise 55° geometry for consistent turning of stainless steel; the double-sided, rhomboidal design reduces tooling costs through simple indexing. Order the DNMG150404 T6215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed DNMG150404 T6215 indexable insert for Turning – Tungaloy DNMG150404 is a rhomboidal ISO indexable insert engineered for stable to lightly interrupted turning of stainless steel in ISO-compatible holders CVD-coated carbide for improved wear resistance Optimised for stainless steel turning Rhomboid 55° geometry with 0.4 mm radius Double-sided indexable insert with cylindrical hole High productivity from a wear-resistant grade The T6215 grade is a CVD-coated carbide developed for demanding turning of stainless steel. The coating improves flank and crater wear resistance, extending tool life under continuous or lightly interrupted cuts. For production environments where component consistency matters, the insert’s enhanced durability means fewer changeovers and steadier cycle times. In practical terms, the hardened coating reduces the rate of edge degradation, helping to maintain dimensional stability across a batch run. Reliable fit and quick indexing for reduced downtime Supplied as an ISO-standard rhomboidal insert, compatibility with the clamping system is determined by form, relief angle, tolerance class, attachment and thickness. The standardised geometry simplifies holder selection and replacement: the insert indexes on the existing seat without special adjustments. The presence of a central cylindrical hole and double-sided cutting edges allows two usable edges per side, promoting cost-efficiency and faster tool rotation in series production. This configuration directly contributes to lower machine downtime and more predictable maintenance intervals. Edge geometry that balances strength and finish The rhomboidal shape with a 55° approach angle and 0.4 mm corner radius offers a compromise between edge strength and surface quality. The moderate corner radius increases robustness for medium-depth cuts while still supporting acceptable surface finish when chosen appropriately. For fine finishing operations, selecting a smaller radius or adjusting cutting parameters will refine the result, whereas for heavy roughing the geometry helps resist chipping. The insert’s double-sided layout further supports repeatable edge changes without recalibration, maintaining process stability. Application guidance and process alignment Designed primarily for external and internal turning, the insert performs best when the chipbreaker and the T6215 grade are selected according to workpiece stability and cutting mode. For interrupted cuts or unstable setups a softer cut and conservative parameters will preserve the edge; for continuous turning the grade’s wear resistance enables higher material removal rates. The ISO plate dimensioning and ease of holder matching mean the insert can be integrated into existing tool systems with minimal adaptation. For tailored recommendations on chipbreakers or holder pairing, Metav Werkzeuge can provide application-oriented advice based on production conditions For reliable machining of stainless steel with proven process security, purchase the Tungaloy DNMG150404 T6215 indexable insert via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for application guidance Technical data Article number: 6877357 SKU: 6877357-Tungaloy Manufacturer SKU: TUN6877357 Model series: ISO-Drehwendeschneidplatten Facts ISO designation: DNMG150404 Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Approach/lead angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features Material: Hartmetall Grade/coating: T6215, CVD-coated carbide Plate form: rhomboidal Chipbreaker: double-sided Application: Turning (external and internal) System: ISO insert with matching external holder, backing/clamping kit and spare screws FAQ What materials is this insert suitable for? The DNMG150404 T6215 indexable insert is formulated for machining stainless steel and is suitable for a broad range of stainless grades under stable to lightly interrupted conditions. How many usable edges does the insert provide? Thanks to the double-sided design and central cylindrical hole, the insert offers multiple indexable edges to prolong tool life and reduce tooling costs. What does the T6215 grade mean for process choice? T6215 denotes a CVD-coated carbide grade optimised for wear resistance in turning applications; it supports higher cutting lengths before edge loss compared with uncoated grades. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO geometry; compatibility depends on form, relief angle, tolerance class, attachment, size and thickness to match the holder’s pocket and clamping system. Which cutting geometry affects surface finish the most? The 0.4 mm corner radius and 55° approach angle are the primary determinants: the radius balances edge strength and finish, while the approach angle influences chip flow and cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a 0.4 mm corner radius and reliable double-sided geometry for stable turning of stainless steel under steady to mildly interrupted cuts. Order directly via Metav Werkzeuge or consult the team for application support. DNMG 150404 T6215 — ISO rhombic turning insert (CVD-coated), Tungaloy DNMG 150404 T6215 is an ISO-format rhombic insert designed for external and internal turning in ISO-compliant tool systems, optimised for stable machining of stainless steel CVD-coated carbide T6215 Optimised for stainless steel turning Rhombic insert, 15 mm, 55° lead angle Double-sided geometry, cylindrical hole Proven wear resistance for steady productivity The CVD-coated cemented carbide grade T6215 delivers enhanced wear resistance and consistent edge life when machining stainless steel in stable or slightly interrupted cuts. The coating forms a hard, wear-resistant surface that reduces flank wear and prolongs tool life; this leads to fewer indexings and less downtime, improving overall process economy. The combination of coating and substrate ensures stable chip formation and repeatable results in series production. Precise geometry for consistent engagement and accuracy The rhombic shape with a 55° lead angle and 0° relief angle provides a predictable cutting direction and a low-profile seat in ISO holders, while the 0.4 mm corner radius balances edge strength with surface finish capability. The insert’s 4.76 mm thickness and standard 15 mm size ensure mechanical stability under typical turning parameters. These geometric attributes support dimensional control and help maintain surface quality during external and internal turning operations. Practical system setup and application guidance Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; the insert is ISO-standardised for straightforward integration into existing holders or boring bars. The cylindrical hole and double-sided design permit economical reindexing and secure fastening. For best performance select a chipbreaker and grade matched to the workpiece, machining stability and feed range — the right chip control reduces heat and enhances tool life. How to choose chipbreaker and cutting conditions Select the double-sided chipbreaker according to material and process stability: a more aggressive chipformer for unstable conditions or a finer chipbreaker for superior surface finishes on stainless steel. Moderate cutting speeds and steady feeds help avoid built-up edge when working with corrosion-resistant alloys. For series production, pair the insert with a rigid holder, correct nose radius and stable clamping to make the most of the insert’s wear resistance and repeatable edge performance. For application advice or to procure Tungaloy inserts such as this CVD-coated DNMG 150404 T6215 for reliable stainless steel turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the team will support selection and supply. Technical Data Article number: 6944718-Tungaloy Manufacturer article number: 6944718 Manufacturer SKU: TUN6944718 Series: ISO turning insert series Facts Insert size: 15 mm Thickness: 4.76 mm Lead angle: 55° Corner radius: 0.4 mm Relief angle: 0° Special features Material: cemented carbide Coating: CVD Geometry: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Grade: T6215 FAQ What holders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG 150404 T6215 is ISO-standard and fits holders and boring bars designed for DNMG indexes. Which materials can be machined with this grade? The T6215 grade on the DNMG 150404 is optimised for stainless steel and offers wear resistance suitable for stable to mildly interrupted turning operations. How does the CVD coating benefit performance? The CVD-coated cemented carbide substrate on the DNMG150404 T6215 provides a hard, wear-resistant surface that reduces flank wear, supports stable chip formation and extends edge life in serial turning. Is the insert economical to use in production? Yes; the double-sided geometry and reindexable design of the DNMG150404 T6215 reduce per-edge costs and help maintain consistent productivity and process economy. What nose radius should be selected for surface finish? The DNMG insert has a 0.4 mm corner radius; pairing this radius with appropriate feed and holder rigidity yields a good compromise between edge strength and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Benefit from the wear resistance of a CVD-coated carbide grade, precise ISO DNMG geometry and a double-sided chipbreaker for steady, reproducible turning results; order the insert via Metav Werkzeuge or consult the technical team for application advice. DNMG 150404 T6215 — Tungaloy indexable insert for turning DNMG 150404 T6215 indexable insert engineered for external and internal turning, optimised for stainless steels under stable to lightly interrupted cutting conditions CVD-coated carbide for wear resistance ISO DNMG 150404 geometry for holder compatibility Double-sided chipbreaker for reliable chip control Suitable for stable to light interrupted turning Improved productivity through a wear-resistant graded coating The CVD-coated carbide grade offers a consistent cutting edge that reduces flank wear and extends time between insert changes. For components in stainless steels, which tend to work-harden, the T6215 grade sustains cutting performance under steady feeds and speeds, helping to lower tool consumption and machine idle time. The combination of coating and substrate is optimised to preserve the edge while maintaining predictable tool life, enabling efficient batch runs and repeatable surface finish. Precise ISO geometry for straightforward holder compatibility Compatibility with a tool holder depends on form, clearance angle, tolerance class, fixing method, size and thickness; the ISO DNMG 150404 form and its defined angles simplify matching to common external holders and boring bars. The rhombic shape and the specified 55° wedge angle support both external and internal operations, while the cylindrical centre hole and standard thickness ease secure clamping. This geometry reduces adjustment time and contributes to consistent part tolerances across production lots. Reliable chip management and grade behaviour for consistent surface quality A double-sided chipbreaker design manages swarf formation and evacuation, lowering the risk of built-up edge and improving surface integrity on the workpiece. The modest 0.4 mm corner radius helps achieve the required contour without aggressive cutting forces, and the insert’s robustness suits slight interruptions without compromising finish. In practice, stable chip control reduces rework and supports uninterrupted machining cycles, which is particularly valuable in automated or lights-out production environments. For fast supply and application guidance on Tungaloy's T6215 indexable inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and order support Technical Data Article number: 6944575 Manufacturer SKU: TUN6944575 Material: carbide Model series: ISO turning indexable inserts Application: Turning Facts ISO designation: 150404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle/size: 15 mm Wedge angle: 55° Clearance angle: 0° Special features Coating type: CVD-coated grade T6215 Plate shape: rhombic Centre hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Insert style: indexable, double-sided FAQ What materials is this insert suited to machine? The Tungaloy DNMG 150404 T6215 indexable insert is formulated primarily for machining stainless steels, delivering wear resistance and stable cutting under steady to lightly interrupted conditions. How is holder compatibility determined for this insert? Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; the ISO DNMG 150404 geometry and cylindrical centre hole support secure clamping in standard DNMG holders. Can the insert be used for both external and internal turning? Yes — the rhombic form and 55° wedge angle allow use in external and internal turning operations where the cutting conditions remain stable or only lightly interrupted. Is the insert indexable and reversible? The insert is double-sided and indexable, offering two cutting edges per side to extend usable life before replacement. What are the key dimensional values to note for setup? Important values include the 0.4 mm corner radius, 4.76 mm plate thickness and ISO designation 150404, which are relevant when selecting a matching holder and setting offsets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
The combination of a wear-resistant CVD-coated carbide grade and a proven rhombic geometry delivers reliable performance and reduced tooling costs in stainless steel turning; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG 150404 T6215 indexable insert for turning — Tungaloy The DNMG150404 T6215 Tungaloy insert is an ISO-standard, rhombic turning insert designed for external and internal machining of stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide T6215 for stainless steels Rhombic 55° insert with cylindrical hole Double-sided chipbreaker for cost efficiency 0.4 mm corner radius, 4.76 mm thickness Consistent cutting performance for stainless steels The CVD-coated carbide grade T6215 is formulated for wear resistance when machining stainless steels, offering a stable cutting edge under continuous and slightly interrupted cuts. The coating reduces flank wear and extends edge life, which translates into longer uninterrupted production runs and fewer tool changes. The insert’s geometry promotes predictable chip formation and reduced built-up edge, so process windows remain stable even when feed and speed are varied for optimisation. Compatibility and secure clamping for reliable setup Machining reliability starts with correct seating and clamping. The ISO-standard rhombic shape with a 55° lead angle and a cylindrical hole enables simple, repeatable positioning in standard holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The through-hole supports positive clamping and straightforward replacement with existing toolholders, reducing setup time and ensuring secure clamping that maintains repeatability over batch production. Productivity gains from geometry and edge design A double-sided chipbreaker doubles the available cutting edges, improving cost efficiency per insert and reducing changeover frequency. The 0.4 mm nose radius supports fine finish work and light profiling, while the 4.76 mm thickness provides sufficient body stiffness for stable performance at moderate cutting parameters. Together, these features help to achieve consistent surface finishes and reliable chip control, so cycle times and downstream rework can be reduced. Choosing the right grade and chip control for process stability Selecting the correct chipbreaker and grade for the workpiece and machining strategy is essential; the chip control built into this insert supports effective evacuation and lowers the risk of edge damage. The robust edge preparation of the grade contributes to process stability and longer tool life, especially when paired with an appropriate holder and clamping kit. For specialised applications or interrupted cuts, matching holder rigidity and cutting data to the component and machine dynamics is advised. If additional technical data is required, the Metav Werkzeuge team can provide cutting parameter recommendations and compatibility checks. Contact Metav Werkzeuge to discuss suitability, request a quotation or arrange supply of the Tungaloy DNMG150404 T6215 indexable insert for stainless steel turning Technical data Article number: 6903031 Manufacturer SKU: TUN6903031 Retail SKU: 6903031-Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Lead angle: 55° Special features Rhombic shape, 55° lead angle Cylindrical hole for positive clamping Double-sided chipbreaker CVD-coated carbide grade T6215 Suitable for stainless steels ISO-compatible geometry FAQ What materials is this insert best suited for? The DNMG150404 T6215 indexable insert is specified for machining stainless steels, where the CVD-coated T6215 grade provides wear resistance and stable edge behaviour. How is the insert secured in the toolholder? Clamping is achieved via the cylindrical hole and standard ISO seating; the rhombic form and tolerance class ensure repeatable location and secure clamping in compatible holders. Can the insert be used for both external and internal turning? Yes, the insert’s geometry and double-sided chipbreaker make it appropriate for both external and internal turning operations under stable to slightly interrupted conditions. How many cutting edges are available per insert? Being double-sided, the insert provides multiple usable edges, which improves economy per edge and reduces the frequency of tool changes during production. What is the typical corner radius and thickness of the insert? The insert features a 0.4 mm corner radius and a 4.76 mm plate thickness, balancing finish capability with robustness for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD coating and ISO-compliant geometry for steady productivity and reduced changeovers. Order the insert directly via Metav Werkzeuge or request tailored application advice from our consultants. DNMG150404 T6215 – ISO turning insert (CVD-coated carbide, 0.4 mm radius) by Tungaloy A DNMG150404 T6215 insert for ISO-compliant external and internal turning, designed for stable to slightly interrupted machining of stainless steels and optimised for consistent surface quality. CVD-coated carbide grade T6215 Optimised for stainless steel turning Rhombic ISO plate, 55° cutting angle 0.4 mm nose radius, double-sided chipbreaker Proven wear resistance for sustained production The CVD-coated T6215 grade offers a clear advantage where longevity under abrasive and adhesive wear is essential. The coating forms a hard, wear-protective layer on the carbide substrate that reduces flank wear and maintains cutting-edge integrity over longer tool life, which helps to lower tooling costs per component and keeps machines running for longer intervals between indexings. This results in a predictable performance profile and fewer unscheduled interruptions in repetitive turning tasks. Geometry that simplifies tooling choices and accuracy The rhombic ISO geometry with a 55° cutting angle and a 0.4 mm nose radius provides a balance between strength and finish capability. The shape is compatible with a wide range of ISO holders; because the insert conforms to ISO dimensions, the selection of a matching external or internal holder is straightforward. The double-sided chipbreaker supports controlled chip formation, helping to maintain consistent dimensional accuracy and surface roughness when machining stainless steels under steady conditions. Faster setup and efficient production through indexability Being an indexable insert, the plate reduces downtime: each face can be indexed to present a fresh cutting edge without the need for full regrind or replacement of a solid tool. The presence of a cylindrical hole and standard fixation tolerances ensures reliable clamping and repeatable positioning in the toolholder. For series production or job-shop environments, this leads to lower handling time per tool change and improved throughput, particularly on components where repeatability and cycle-time consistency are priorities. Suitable applications and who benefits most This insert is tailored for turning operations where stainless steels are the main work material, and where machining conditions range from stable to slightly interrupted cuts. Typical applications include external profiling, light roughing and finishing passes on shafts and housings. Shops seeking a reliable, general-purpose solution with good surface quality and extended edge life will find this insert especially useful; toolroom engineers and production managers will appreciate the blend of robustness and dimensional control. For procurement or technical evaluation of Tungaloy inserts with T6215 grade, contact Metav Werkzeuge for application-specific recommendations and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944596 Manufacturer SKU: TUN6944596 Product type: ISO turning indexable insert Model series: ISO turning indexable inserts Numbers / Core technical data ISO designation: 150404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Cutting angle: 55° Designs / Special features Grade: T6215 Coating: CVD Material: carbide Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning of stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert optimised for? The DNMG150404 T6215 insert is optimised for machining stainless steels, providing controlled wear behaviour and consistent surface quality under stable to slightly interrupted conditions. How does the T6215 grade improve tool life? The CVD-coated T6215 grade combines a hard, wear-resistant coating with a robust carbide substrate, which delays flank wear and preserves cutting-edge geometry, extending life compared with uncoated grades. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and clamping conventions; compatibility depends on holder form, relief angle and tolerance class, making selection of a suitable ISO external or internal holder straightforward. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance and ISO‑format compatibility for predictable, productive turning of stainless steel; the insert’s reversible geometry and reliable chip control keep cycle times stable. Order the insert directly via Metav Werkzeuge or consult the team for process matching. DNMG150404 T6215 Turning indexable insert — CVD-coated carbide, 55° — Tungaloy DNMG150404 T6215 is an ISO‑format turning indexable insert designed for stable to lightly interrupted machining of stainless steel, combining a CVD‑coated substrate with a double‑sided chipbreaker for consistent performance DNMG150404 geometry, 55° rhombic shape CVD‑coated carbide T6215 for high wear resistance Double‑sided chipbreaker, reversible for cost efficiency Cylindrical hole and 0° clearance for secure mounting Dependable wear resistance for continuous production The CVD‑coated carbide grade T6215 offers high wear resistance specifically tailored to machining stainless steel under stable to lightly interrupted conditions. The chemical vapour deposition layer reduces flank and crater wear, extending the usable life of the cutting edge and lowering tool change frequency. This translates into fewer unplanned stops and a steadier production flow, helping to maintain component tolerances over longer runs. Compatibility with ISO holders ensures that the insert integrates into common tool systems without modifications. Geometry that improves surface quality and chip control The DNMG rhombic form with a 55° approach angle and 0° clearance minimises radial load and supports predictable cutting forces, aiding surface finish and dimensional stability. The corner radius 0.4 mm provides a robust cutting edge that balances edge strength with surface smoothness; a larger radius would increase tool life at the expense of sharper detail, while a smaller radius favours fine finishing. The insert’s double‑sided chipbreaker delivers reproducible chip formation and evacuation, reducing the risk of built‑up edge and improving machining reliability in continuous operations. Easy integration and selection for practical workshops As an ISO‑format insert, DNMG150404 T6215 fits standard external turning holders and boring bars; mechanical compatibility is defined by form, clearance angle, tolerance class, fastening and plate thickness. The cylindrical hole and specified plate thickness 4.76 mm ensure secure clamping with the usual underlay or clamp sets and replacement screws. Being double‑sided, the insert is reversible, offering immediate cost advantages through two usable edges per side depending on application. When selecting the exact chipbreaker and grade for an application, match the insert’s stability and the workpiece conditions to achieve the best balance between cutting data and tool life. Contact Metav Werkzeuge for application advice and order reference TUN6944650 for the Tungaloy DNMG150404 T6215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944650 Manufacturer SKU: TUN6944650 SKU: 6944650-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Designation: DNMG150404 T6215 Application: Turning Numerical data Approach angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Corner radius: 0.4 mm Special features CVD‑coated carbide grade T6215 Double‑sided chipbreaker (reversible) Rhombic plate form (DNMG) Cylindrical hole for secure fastening ISO‑format insert for external holders and boring bars Suitable for machining stainless steel Intended use under stable to lightly interrupted cutting conditions FAQ What materials is this insert suitable for? The DNMG150404 T6215 insert is designed primarily for stainless steel; the CVD coating and substrate combination provide wear resistance for stainless applications under stable to lightly interrupted cuts. Which toolholders are compatible with this insert? Compatibility depends on the holder’s form, free angle, tolerance class and fastening. The DNMG150404 follows ISO dimensions and fits standard DNMG‑compatible external turning holders and boring bars when clamped with the correct underlay and screws. How does the chipbreaker affect machining? The double‑sided chipbreaker on the DNMG150404 creates controlled chip segmentation and evacuation, improving surface finish and reducing the risk of built‑up edge during continuous turning operations. Can the insert be used for interrupted cuts? Yes. The T6215 grade and the 0° clearance geometry are suited to stable to lightly interrupted cutting; for heavy interruptions, review holder rigidity and cutting parameters before proceeding. Is the insert reversible and how many cutting edges are available? The DNMG150404 is double‑sided and reversible, offering multiple usable cutting edges per insert to enhance cost efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD‑coated carbide and a balanced 55° rhombic geometry with a 0.4 mm nose radius deliver reliable cutting performance and consistent surface finish under stable to lightly interrupted conditions; compatibility with ISO holders and a cylindrical‑hole clamping design ensures straightforward integration into existing tool systems. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 T6215 ISO indexable turning insert, CVD‑coated carbide, for turning — Tungaloy DNMG150404 T6215 is an ISO‑standard rhombic indexable insert for external and internal turning, designed for machining rostfreier Stahl using a wear‑resistant CVD‑coated carbide grade under stable to lightly interrupted conditions. CVD‑coated carbide for high wear resistance Optimised for machining rostfreier Stahl Rhombic 55° geometry, 0.4 mm nose radius Cylindrical‑hole design, 4.76 mm thickness Engineered for productivity and predictable tool life The DNMG150404 T6215 insert pairs a CVD coating with a robust carbide substrate to extend edge life during demanding turning operations. This combination reduces flank wear and maintains a stable cutting edge over longer periods, which in turn lowers tool change frequency and increases machine uptime. The balanced geometry supports efficient chip evacuation and contributes to consistent surface quality, so process stability and throughput are improved without sacrificing component finish. Interchangeability and secure clamping for simple integration Compliance with ISO dimensions means the insert fits common holders and boring bars when form, clearance angle, tolerance class, attachment method, size and thickness match. The cylindrical‑hole fastening style and a plate thickness of 4.76 mm provide secure clamping and torsional stability in the pocket. Where replacement screws or shims are required, the insert integrates into standard system assemblies, allowing quick swaps and predictable seating for serial production. Performance advantages when machining rostfreier Stahl The T6215 grade is designed for rostfreier Stahl, offering wear resistance under stable to lightly interrupted conditions. The double‑sided chipbreaker supports controlled chip formation, assisting coolant flow and reducing the risk of built‑up edge. The 0.4 mm nose radius presents a compromise between strength and surface finish: it supports higher feed rates with adequate robustness while still enabling a fine finish when required by the workpiece specification. Selecting the right insert geometry and chipbreaker Choosing an insert involves matching the 55° rhombic geometry and nose radius to the part tolerance and clamping rigidity. A larger nose radius improves component integrity but increases cutting forces; the 0.4 mm radius here is a versatile option for many medium‑precision turning tasks. For less stable set‑ups or heavily interrupted cuts, opting for a more protective geometry or different grade is recommended. The double‑sided chipbreaker simplifies inventory management by providing two usable edges per index. Contact Metav Werkzeuge for tailored application advice, compatibility checks or to source the Tungaloy DNMG150404 T6215 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6875485-Tungaloy Manufacturer article number: 6875485 Manufacturer SKU: TUN6875485 Model series: ISO indexable turning inserts Material: carbide Core specifications Insert designation: DNMG150404 Grade: T6215 Size: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Relief angle: 0° Insert angle: 55° Hole style: cylindrical Chipbreaker: double‑sided Design & special features CVD‑coated carbide substrate ISO‑standard rhombic form Suitable for external and internal turning Intended for rostfreier Stahl under stable to light interrupted conditions System components: compatible outer holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert designed for? The Tungaloy DNMG150404 T6215 insert is formulated for machining rostfreier Stahl and performs best under stable to lightly interrupted cutting conditions. How does the 0.4 mm nose radius affect machining? A 0.4 mm nose radius on the DNMG150404 balances edge strength and surface finish, allowing moderate feeds while maintaining dimensional stability. Is the insert reversible and how many cutting edges are available? The DNMG150404 T6215 is double‑sided with two usable cutting edges per index, supporting efficient re‑indexing and economical tool usage. What clamping style does the insert use? This insert features a cylindrical‑hole clamping design for secure mounting in compatible ISO holders and boring bars. Can this insert be used with interrupted cuts? Yes; the T6215 grade is intended for stable to lightly interrupted conditions. For heavy interruptions, consider a more robust grade or geometry. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, a precise 0.4 mm corner radius and a double-sided economy design that enhances productivity and tool life in stable turning operations; order directly via Metav Werkzeuge or consult their technical team for application matching. DNMG 150404 T6215 – Indexable turning insert for Turning by Tungaloy A DNMG150404 T6215 indexable insert engineered for external and internal turning of rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 0.4 mm corner radius for precise cutting Double-sided DNMG rhombic economy design Cylindrical hole and 4.76 mm thickness for secure clamping High-efficiency cutting and longer tool life This indexable insert is manufactured in CVD-coated carbide and specified as T6215, delivering a balance between wear resistance and toughness. The coated substrate reduces flank and crater wear, which translates to more consistent component tolerances and longer tool life under continuous turning cycles. The 0.4 mm corner radius supports dimensional accuracy on shoulders and profiles while the double-sided geometry offers economical indexability, reducing tooling cost per part. These characteristics together raise process throughput and lower the frequency of insert changes for production runs. Secure clamping and broad ISO compatibility The rhombic DNMG form with a cylindrical hole and a plate thickness of 4.76 mm ensures stable, repeatable clamping in suitable toolholders. Compatibility with a holder depends on the insert’s form, relief angle, tolerance class, fastening method, size and thickness; these parameters match common ISO turning holders for reliable retention. The 0° relief angle and the standardised 150404 designation allow straightforward selection of matching cutters and clamping kits, reducing setup time and minimising the risk of assembly errors during tool changes. Predictable chip control and process reliability Equipped with a double-sided chipbreaker and optimised geometry for rostfreier Stahl, the insert provides controlled chip formation in stable to lightly interrupted cuts. The geometry and coating combination reduces heat build-up at the cutting edge and maintains cutting-edge integrity across repeated cycles, which improves surface finish and reduces the need for downstream rework. Choosing a grade and chipbreaker appropriate to the workpiece material supports consistent results and contributes to measurable productivity gains in batch and single-piece production. Contact Metav Werkzeuge today to discuss application-specific machining with Tungaloy CVD-coated inserts and to arrange supply of the DNMG150404 T6215 unit — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: 6944690 SKU: 6944690-Tungaloy Manufacturer SKU: TUN6944690 Model series: ISO turning indexable inserts Facts Geometry: DNMG 150404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 15 mm Included angle: 55° Relief angle: 0° Designation / ISO: 150404 Special features Material: carbide Coating/type: CVD-coated carbide (T6215) Chipbreaker: double-sided Plate form: rhombic Hole: with hole, cylindrical hole Application: Turning (external and internal) FAQ Which materials is this insert best suited for? This DNMG150404 T6215 insert by Tungaloy is designed primarily for machining rostfreier Stahl in stable to lightly interrupted turning operations, offering improved wear resistance with its CVD-coated carbide composition. Is the insert reversible and economical for production? Yes, the insert is double-sided, allowing indexing to a fresh cutting edge; the DNMG rhombic format supports economical tool usage and reduced tooling costs per component. What are the key dimensional data to check before ordering? Check the DNMG 150404 geometry, 0.4 mm corner radius, 4.76 mm plate thickness and 15 mm size to ensure compatibility with the chosen ISO holder and clamping system. How does the T6215 grade influence machining performance? The T6215 CVD-coated carbide grade provides a wear-resistant cutting surface suited to rostfreier Stahl, extending tool life and stabilising cutting conditions in serial production. How should the insert be matched to a toolholder? Match by form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150404 designation and the 150404 ISO code facilitate selection of compatible holders and clamping kits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com